This little helper only exists to safely discard the upper unused 32bits
of the general 64-bit VMA address - as we know that all Global GTT
currently are less than 4GiB in size and so that the upper bits must be
zero. In many places, we use a u32 for the global GTT offset and we want
to document where we are discarding the full VMA offset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-28-git-send-email-chris@chris-wilson.co.uk
Since the scratch allocation and cleanup is shared by all engine
submission backends, move it out of the legacy intel_ringbuffer.c and
into the new home for common routines, intel_engine_cs.c
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-20-git-send-email-chris@chris-wilson.co.uk
Use the GGTT VMA as the primary cookie for handing ring objects as
the most common action upon the ring is mapping and unmapping which act
upon the VMA itself. By restructuring the code to work with the ring
VMA, we can shrink the code and remove a few cycles from context pinning.
v2: Move the flush of the object back to before the first pin. We use
the am-I-bound? query to only have to check the flush on the first
bind and so avoid stalling on active rings.
Lots of little renames and small hoops.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-18-git-send-email-chris@chris-wilson.co.uk
When working with contexts, we most frequently want the GGTT VMA for the
context state, first and foremost. Since the object is available via the
VMA, we need only then store the VMA.
v2: Formatting tweaks to debugfs output, restored some comments removed
in the next patch
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-15-git-send-email-chris@chris-wilson.co.uk
vmaps has a provision for controlling the page protection bits, with which
we can use to control the mapping type, e.g. WB, WC, UC or even WT.
To allow the caller to choose their mapping type, we add a parameter to
i915_gem_object_pin_map - but we still only allow one vmap to be cached
per object. If the object is currently not pinned, then we recreate the
previous vmap with the new access type, but if it was pinned we report an
error. This effectively limits the access via i915_gem_object_pin_map to a
single mapping type for the lifetime of the object. Not usually a problem,
but something to be aware of when setting up the object's vmap.
We will want to vary the access type to enable WC mappings of ringbuffer
and context objects on !llc platforms, as well as other objects where we
need coherent access to the GPU's pages without going through the GTT
v2: Remove the redundant braces around pin count check and fix the marker
in documentation (Chris)
v3:
- Add a new enum for the vmalloc mapping type & pass that as an argument to
i915_object_pin_map. (Tvrtko)
- Use PAGE_MASK to extract or filter the mapping type info and remove a
superfluous BUG_ON.(Tvrtko)
v4:
- Rename the enums and clean up the pin_map function. (Chris)
v5: Drop the VM_NO_GUARD, minor cosmetics.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471001999-17787-1-git-send-email-chris@chris-wilson.co.uk
We allocate a few objects into the GGTT that we never need to access via
the mappable aperture (such as contexts, status pages). We can request
that these are bound high in the VM to increase the amount of mappable
aperture available. However, anything that may be frequently pinned
(such as logical contexts) we want to use the fast search & insert.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470832906-13972-1-git-send-email-chris@chris-wilson.co.uk
Before suspending (or unloading), we would first wait upon all rendering
to be completed and then disable the rings. This later step is a remanent
from DRI1 days when we did not use request tracking for all operations
upon the ring. Now that we are sure we are waiting upon the very last
operation by the engine, we can forgo clobbering the ring registers,
though we do keep the assert that the engine is indeed idle before
sleeping.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-5-git-send-email-chris@chris-wilson.co.uk
Backmerge the 4.8 pull request state from Dave - conflicts were
getting out of hand, and Chris has some patches which outright don't
apply without everything merged together again.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Since i915_gem_obj_ggtt_pin() is an idiom breaking curry function for
i915_gem_object_ggtt_pin(), spare us the confusion and remove it.
Removing it now simplifies later patches to change the i915_vma_pin()
(and friends) interface.
v2: Add a redundant GEM_BUG_ON(!view) to
i915_gem_obj_lookup_or_create_ggtt_vma()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-18-git-send-email-chris@chris-wilson.co.uk
Now that we initialize the state to both legacy and execlists inside
intel_engine_cs, we should also clean up that state from the common
functions.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470226756-24401-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Space reservation is already safe with respect to the ring->size
modulus, but hardware only expects to see values in the range
0...ring->size-1 (inclusive) and so requires the modulus to prevent us
writing the value ring->size instead of 0. As this is only required for
the register itself, we can defer the modulus to the register update and
not perform it after every command packet. We keep the
intel_ring_advance() around in the code to provide demarcation for the
end-of-packet (which then can be compared against intel_ring_begin() as
the number of dwords emitted must match the reserved space).
v2: Assert that the ring size is a power-of-two to match assumptions in
the code. Simplify the comment before writing the tail value to explain
why the modulus is necessary.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-13-git-send-email-chris@chris-wilson.co.uk
Rather than passing a complete set of GPU cache domains for either
invalidation or for flushing, or even both, just pass a single parameter
to the engine->emit_flush to determine the required operations.
engine->emit_flush(GPU, 0) -> engine->emit_flush(EMIT_INVALIDATE)
engine->emit_flush(0, GPU) -> engine->emit_flush(EMIT_FLUSH)
engine->emit_flush(GPU, GPU) -> engine->emit_flush(EMIT_FLUSH | EMIT_INVALIDATE)
This allows us to extend the behaviour easily in future, for example if
we want just a command barrier without the overhead of flushing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-8-git-send-email-chris@chris-wilson.co.uk
Space for flushing the GPU cache prior to completing the request is
preallocated and so cannot fail - the GPU caches will always be flushed
along with the completed request. This means we no longer have to track
whether the GPU cache is dirty between batches like we had to with the
outstanding_lazy_seqno.
With the removal of the duplication in the per-backend entry points for
emitting the obsolete lazy flush, we can then further unify the
engine->emit_flush.
v2: Expand a bit on the legacy of gpu_caches_dirty
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-18-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-7-git-send-email-chris@chris-wilson.co.uk
The state stored in this struct is not only the information about the
buffer object, but the ring used to communicate with the hardware. Using
buffer here is overly specific and, for me at least, conflates with the
notion of buffer objects themselves.
s/struct intel_ringbuffer/struct intel_ring/
s/enum intel_ring_hangcheck/enum intel_engine_hangcheck/
s/describe_ctx_ringbuf()/describe_ctx_ring()/
s/intel_ring_get_active_head()/intel_engine_get_active_head()/
s/intel_ring_sync_index()/intel_engine_sync_index()/
s/intel_ring_init_seqno()/intel_engine_init_seqno()/
s/ring_stuck()/engine_stuck()/
s/intel_cleanup_engine()/intel_engine_cleanup()/
s/intel_stop_engine()/intel_engine_stop()/
s/intel_pin_and_map_ringbuffer_obj()/intel_pin_and_map_ring()/
s/intel_unpin_ringbuffer()/intel_unpin_ring()/
s/intel_engine_create_ringbuffer()/intel_engine_create_ring()/
s/intel_ring_flush_all_caches()/intel_engine_flush_all_caches()/
s/intel_ring_invalidate_all_caches()/intel_engine_invalidate_all_caches()/
s/intel_ringbuffer_free()/intel_ring_free()/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-15-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-4-git-send-email-chris@chris-wilson.co.uk
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXlRXSAAoJEHm+PkMAQRiGG/gH/0Z8O4zWOsrwO+X1mRToRDBH
joFOjAmCVe83T1VpF5LYNB+9+owL/dEDt6+ZIswnhH7AfQPjs4RqwS4PcuMbCDVO
+mDm0PmfcKaYcQZrB2Z2OwIzRNnfCTVcsDPhIHwuIHk0m4z/xuGZonD8KoAj0+tO
3yJF6sbE1KubDVjOb+lmZZSP3cXA0pDXrNhkYhE4Tsr8fiihGjeXSNJ8t2zPLjxo
W3MPqo0rzDvQsOwoF4TWHHagVaFSJlhLBBgqu33fI7uO3jtfQD2G8wG68JCND1j3
qbMoBfTLFV/yQmSIJUt0Wv1axaCcwnjpweEB35A/GEeZ0mNB1rDdoBeI1eKEQkc=
=DGFC
-----END PGP SIGNATURE-----
Backmerge tag 'v4.7' into drm-next
Linux 4.7
As requested by Daniel Vetter as the conflicts were getting messy.
Add WaDisableGatherAtSetShaderCommonSlice for all gen9 as stated
by bspec. The bspec told to put this workaround to the per ctx bb.
Initial implementation and subsequent review were done based on
bspec. Arun raised a suspicion that this would belong to indirect bb
instead and he conducted more throughout investigation on the matter
and indeed the documentation was wrong.
v2: Move to indirect_ctx wa bb, as it is correct place (Arun)
References: HSD#2135817
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com> (v1)
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469013973-24104-1-git-send-email-mika.kuoppala@intel.com
dma-buf provides a generic fence class for interoperation between
drivers. Internally we use the request structure as a fence, and so with
only a little bit of interfacing we can rebase those requests on top of
dma-buf fences. This will allow us, in the future, to pass those fences
back to userspace or between drivers.
v2: The fence_context needs to be globally unique, not just unique to
this device.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-4-git-send-email-chris@chris-wilson.co.uk
Fairly minimal, there's still lots of functions without any docs, and
which aren't static. But probably we want to first clean this up some more.
- Drop the bogus const. Marking argument pointers themselves (instead of
what they point at) as const provides roughly 0 value. And it's confusing,
since the data the pointer points at _is_ being changed.
- Remove kerneldoc for static functions. Keep comments where they seem valuable.
- Indent and whitespace fixes.
- Blockquote the bit field definitions of the descriptor for correct layouting.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468612088-9721-9-git-send-email-daniel.vetter@ffwll.ch
Extend the scope of this workaround, already used in skl,
to also take effect in kbl.
v2: Fix KBL_REVID_E0 (Matthew)
References: HSD#2132677
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-12-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit fe90581987)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Common code deserves to be put in a separate file from legacy and
execlists implementation for clarity and ease of maintenance.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
With the unified common engine setup done, and the execlist engine
initialization loop clearly split into two phases, we can eliminate
the separate legacy engine initialization code.
v2: Fix cleanup path for legacy.
v3: Rename constructors. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
Move the execlist engine setup to vfuncs so that the engine
init loop is clearly split into the mode agnostic and
specific steps.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
intel_lrc.c has a table of "logical rings" (meaning engines), while
intel_ringbuffer.c has separately open-coded initialisation for each
engine. We can deduplicate this somewhat by using the same first-stage
engine-setup function for both modes.
So here we expose the function that transfers information from the
static table of (all) known engines to the dev_priv->engine array of
engines available on this device (adjusting the names along the way)
and then embed calls to it in both the LRC and the legacy-mode setup.
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
This patch applies WaMediaPoolStateCmdInWABB which fixes
a problem with the restoration of thread counts on resuming
from RC6.
References: HSD#2137167
Signed-off-by: Tim Gore <tim.gore@intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467709290-5941-1-git-send-email-tim.gore@intel.com
Since drm_i915_private is now a subclass of drm_device we do not need to
chase the drm_i915_private->dev backpointer and can instead simply
access drm_i915_private->drm directly.
text data bss dec hex filename
1068757 4565 416 1073738 10624a drivers/gpu/drm/i915/i915.ko
1066949 4565 416 1071930 105b3a drivers/gpu/drm/i915/i915.ko
Created by the coccinelle script:
@@
struct drm_i915_private *d;
identifier i;
@@
(
- d->dev->i
+ d->drm.i
|
- d->dev
+ &d->drm
)
and for good measure the dev_priv->dev backpointer was removed entirely.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467711623-2905-4-git-send-email-chris@chris-wilson.co.uk
Since we now subclass struct drm_device, we can save pointer dances by
noting the equivalence of struct drm_device and struct drm_i915_private,
i.e. by using to_i915().
text data bss dec hex filename
1073824 4562 416 1078802 107612 drivers/gpu/drm/i915/i915.ko
1068976 4562 416 1073954 106322 drivers/gpu/drm/i915/i915.ko
Created by the coccinelle script:
@@
expression E;
identifier p;
@@
- struct drm_i915_private *p = E->dev_private;
+ struct drm_i915_private *p = to_i915(E);
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467628477-25379-1-git-send-email-chris@chris-wilson.co.uk
Now that we have (near) universal GPU recovery code, we can inject a
real hang from userspace and not need any fakery. Not only does this
mean that the testing is far more realistic, but we can simplify the
kernel in the process.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467616119-4093-7-git-send-email-chris@chris-wilson.co.uk
With only a single callsite for intel_engine_cs->irq_get and ->irq_put,
we can reduce the code size by moving the common preamble into the
caller, and we can also eliminate the reference counting.
For completeness, as we are no longer doing reference counting on irq,
rename the get/put vfunctions to enable/disable respectively and are
able to review the use of posting reads. We only require the
serialisation with hardware when enabling the interrupt (i.e. so we
cannot miss an interrupt by going to sleep before the hardware truly
enables it).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1467390209-3576-18-git-send-email-chris@chris-wilson.co.uk
By using the same address for storing the HWS on every platform, we can
remove the platform specific vfuncs and reduce the get-seqno routine to
a single read of a cached memory location.
v2: Fix semaphore_passed() to look at the signaling engine (not the
waiter's)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467390209-3576-8-git-send-email-chris@chris-wilson.co.uk
