Minor changes to nicely line up device entries.
Signed-off-by: Denis Pithon <denis.pithon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes "missing a blank line after declaration" warnings from
checkpatch.pl for driver xgifb. The driver has no remaining errors or
warnings from checkpatch.pl
Signed-off-by: Vitor Braga <vitorpybraga@gmail.com>
Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initial state at boot is assumed to be disconnected, and we hope
to receive an interrupt to update the status. Let's be more explicit
about the current state - reading the PHY status register tells us
the current level of the hotplug signal, which we can report back in
the _detect() method.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The decoder mux id is equal to the port id of the encoder's input port
that is connected to the given crtc, not to the endpoint id (which is
arbitrary and usually zero).
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No need to return a 'fake' return value on platform_get_irq() failure.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify hdmi_phy_wait_i2c_done so the call to hdmi_readb is
only done in one place. Also check for timout before waiting
as suggested by Troy Kisky.
This also fixes a checkpatch warning.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support the LVDS666 format on the IPUv3 parallel display.
This makes the screen work on my Hercules eCAFE Slim HD.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mmu-gather operation 'tlb_flush_mmu()' has done two things: the
actual tlb flush operation, and the batched freeing of the pages that
the TLB entries pointed at.
This splits the operation into separate phases, so that the forced
batched flushing done by zap_pte_range() can now do the actual TLB flush
while still holding the page table lock, but delay the batched freeing
of all the pages to after the lock has been dropped.
This in turn allows us to avoid a race condition between
set_page_dirty() (as called by zap_pte_range() when it finds a dirty
shared memory pte) and page_mkclean(): because we now flush all the
dirty page data from the TLB's while holding the pte lock,
page_mkclean() will be held up walking the (recently cleaned) page
tables until after the TLB entries have been flushed from all CPU's.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix checkpatch.pl issues with missing blank line after declarations.
Signed-off-by: Toby Smith <toby@tismith.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes following smatch warning:
slicoss/slicoss.c:1429 slic_cmdq_addcmdpage() error: we previously assumed 'pslic_handle' could be null
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the definition of pci_mem_start|end from correct from pci_io(un)map's
point of view.
Signed-off-by: Anders Darander <anders.darander@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver can already use request_firmware() to load firmware, and
always does so. There is code in init_firmware() to use the static
firmware images, but it's unreachable! Remove the data and simplify
init_firmware() accordingly.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A word in printk is split into two lines.
Change it into one line.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Reviewed-by: James Cameron <quozl@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct led_priv contains two variables SwLed0 and SwLed1 but only
SwLed0 is being used by SwLedControlModel1() function.
SwLedControlModel1() function performs led operations.
This patch removes SwLed1 and code which uses SwLed1.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now driver has only one type of led blinking strategy, so we don't
need enum LED_STRATEGY_871x variable to store led blinking strategy
type.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
driver has code to blink the led in 7 different ways.
struct led_priv contains an enum LED_STRATEGY_871x variable which is
initialized to SW_LED_MODE1 inside rtl8188eu_InitSwLeds() function.
it means driver is hard coded to use only SW_LED_MODE1 blinking strategy.
so we can remove the code related to other blinking strategies
e.g. SW_LED_MODE[0|2|3|4|5|6].
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_ReadLEDSetting() doesn't read led settings this function actually
initialize member variables of struct led_priv, we should do that
inside rtl8188eu_InitSwLeds().
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_led_blink_cmd() isn't being used by driver.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drv_types_linux.h is empty, so remove the header file and its
reference.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit fixes the following checkpatch errors:
rtl8188eu/core/rtw_recv.c
- 1874: ERROR: code indent should use tabs where possible
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit fixes the following checkpatch errors:
rtl8188eu/core/rtw_p2p.c
- 1508: ERROR: code indent should use tabs where possible
- 1509: ERROR: code indent should use tabs where possible
- 1510: ERROR: code indent should use tabs where possible
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes all checkpatch errors reporting that statics shouldn't be initialised
to their defualt values.
Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch error:
ERROR: switch and case should be at the same indent
+ switch (coex_dm->cur_retrylimit_type) {
+ case 0: /* normal mode */
[...]
+ case 1: /* retry limit=8 */
[...]
+ default:
Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch issues relating to using leading spaces instead of tabs.
Whitespace changes only.
Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Whitespace changes only to appease checkpatch warnings.
Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We set btrssi to zero and then immediately assign it. Assign it
on declaration instead.
Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse complains about halbtc8192e2ant_low_penalty_ra() not being used,
and subsequently halbtc8192e2ant_set_sw_penalty_tx_rateadaptive() when
this is removed. remove both functions.
Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In halbtc8192e2ant.c, fix all instances of the sparse warning:
warning: symbol 'xxx' was not declared. Should it be static?
Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove functions not being called from anywhere:
halbtc8192e2ant_set_adc_backoff()
halbtc8192e2ant_adc_backoff()
Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All code in this file is encapsulated in a useless #if 1
declaration, remove it.
Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The two declarations with issues in rtl_wx.h:
* function: struct iw_statistics *r8192_get_wireless_stats();
* variable: extern struct iw_handler_def r8192_wx_handlers_def;
The symbol 'r8192_get_wireless_stats' is declared as 'extern'
but it is only used in the local scope. The declaration is deleted
of rtl_wx.h, fixing the conflict with the 'extern' and 'static' scope.
The symbol 'r8192_wx_handlers_def' was fixed of some issues related
to variable declaration marked as 'extern' implicitly,
causing this sparse warning:
drivers/staging/rtl8192e/rtl8192e/rtl_wx.c:1323:24: warning: symbol
'r8192_wx_handlers_def' was not declared. Should it be static?
Resolved incluing the fixed header to rtl_wx.c
Also, isn't declared as constant variable, so it declared as such.
And delete unnecessary cast in rtl_core.c.
Signed-off-by: Joel Pelaez Jorge <joelpelaez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ERROR: spaces required around that '=' (ctx:OxW)
Signed-off-by: Paul McQuade <paulmcquad@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ->SupportedRates[] array has NDIS_802_11_LENGTH_RATES_EX (16)
elements. Since "ie_len" comes from then network and can go up to 255
then it means we should add a range check to prevent memory corruption.
Fixes: d6846af679 ('staging: r8188eu: Add files for new driver - part 7')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* pnp:
PNP: Work around BIOS defects in Intel MCH area reporting
* acpi-hotplug:
ACPI / notify: Do not block unknown type notifications in root handler
fix a coding style issue: Missing a blank line after declarations
Signed-off-by: huanqi chi <chihuanqi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pci_get_drvdata() and checking NULL for dev are
called twice in while loop in is_bypass_dev().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
checkpatch script returns the following warning:
ERROR: do not use assignment in if condition
+ if (((dev_num = get_dev_idx(dev->ifindex)) ==
-1) |
This patch fixes the if condition by splitting it.
Signed-off-by: Neil Armstrong <superna9999@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some code is hide inside #ifdef BP_PROC_SUPPORT and it never defined
anywhere. And, it made defined but not used function which calling
code was hide inside #ifdef BP_PROC_SUPPORT and caused following
build warning:
drivers/staging/silicom/bpctl_mod.c:6786:12: warning:
‘bp_proc_create’ defined but not used [-Wunused-function]
static int bp_proc_create(void)
^
Fix the warning and remove code complexity by remove whole code
inside #ifdef BP_PROC_SUPPORT.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add x86_cpu_id struct and call to MODULE_DEVICE_TABLE so this module
will be auto loaded on boot.
Signed-off-by: Ken Cox <jkc@redhat.com>
Tested-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes all of the various representations of the copyright symbol
to (C).
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
