Commit Graph

39 Commits

Author SHA1 Message Date
Magnus Damm
6582d7b737 sh: add spi header and r2d platform data V3
This patch adds the header file asm/spi.h and board specific code for the
r2d board. The header file contains a structure that should be used to
point out a single spi bus. The board specific code for r2d is updated with
such a structure for the new spi_sh_sci driver. The structure contains a
chip select callback plus information about the R9701 rtc chip which is
attached to the spi bus.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 16:24:46 +09:00
Magnus Damm
d1eea50b0c sh: r2d - enable sm501 usb host function
This patch tells the sm501 mfd driver to build platform data for the
sm501 usb host driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:03 +09:00
Magnus Damm
29ec6778a4 sh: remove voyagergx
This patch removes redundant irq handling code together with unused
consistent alloc code. R2D uart setup code is changed to use
sm501-regs.h and unused header files are removed.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:03 +09:00
Magnus Damm
cbd10dfb82 sh: r2d - add lcd planel timings to sm501 platform data
This patch adds timings to drive a Sharp LQ104V1DG21 lcd panel that can
be hooked up to R2D-1 or R2D-PLUS. The sm501fb driver should leave the
pins FPEN and VBIASEN alone, and this patch instructs the driver to do
so by not setting flags flags for these pins.

This patch works best together with the patch posted to the
linux-fbdev-devel list "sm501fb: control panel pin usage with platform
data flags", but this patch can be merged independently.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:03 +09:00
Magnus Damm
7f3edee81f sh: intc - remove default interrupt priority tables
This patch removes interrupt priority tables from the intc code.
Optimal priority assignment varies with embedded application anyway,
so keeping the interrupt priority tables together with cpu-specific
code doesn't make sense.

The function intc_set_priority() should be used instead to set the
desired interrupt priority level.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:02 +09:00
Magnus Damm
abac3f784f sh: fix R2D-1 CF support
This patch fixes CF support for R2D-1 boards. Both R2D-1 and
R2D-PLUS are equipped with CF IRQs, but the R2D-1 FPGA version
seem to deliver IRQ spikes with certain CF cards during libata
probing.  This patch enables polling for R2D-1 as a workaround
for this broken FGPA logic.

R2D-1 CF support was recently introduced by commit:
43f4b8c757.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-23 14:39:13 +09:00
Magnus Damm
68ee0f9c98 sh: allow building for both r2d boards in same binary.
This patch enables building for both R2D-PLUS and R2D-1 boards. All code is
already in place except for the Kconfig limitation. This is useful if you
want to run the same binary on both R2D-PLUS and R2D-1 boards.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-10 18:04:42 +09:00
Magnus Damm
9cbf3be67d sh: fix r2d board detection
This patch fixes the R2D-PLUS and R2D-1 board detection code. Tested on two
R2D-PLUS and two R2D-1 boards.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-10 18:03:58 +09:00
Paul Mundt
02353f5d2a sh: rts7751r2d: Fix up trivial build failure.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 15:21:55 +09:00
Aoi Shinkai
43f4b8c757 sh: rts7751r2d cf_ide rework
Support CF IDE on R2D-1 boards.

Signed-off-by: Aoi Shinkai <shinkoi2005@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 15:18:33 +09:00
Magnus Damm
5cbc3af521 sh: minor fixes
This patch contains the following fixes:
- Adds sh7785 support to CONFIG_EARLY_SCIF_CONSOLE_PORT.
- Removes duplicate include from rts7751r2d irq code.
- Removes CONFIG_CPU_HAS_INTC from sh7720 Kconfig entry.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:52 +09:00
Paul Mundt
a1fd306b88 sh: Fix up heartbeat build and resource size.
We were abusing the resource size for the number of bits, this
has been reworked using proper platform data, so this can be
tidied up now. Boards in general only have a 1-byte wide resource,
which the ioremap_nocache() case already handles.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:51 +09:00
Magnus Damm
5c37e02535 sh: intc - mark data structures as __initdata
With the intc core improved it is now possible to put the intc data
structures in the initdata section.

Version two of this patch puts the __initdata inside DECLARE_INTC_DESC()
and removes the __initdata included in the board specific r2d code.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:50 +09:00
Magnus Damm
f8b40d8ce8 sh: replace sh specific CONFIG_VOYAGERGX with CONFIG_MFD_SM501
This patch replaces all instances of CONFIG_VOYAGERGX with
CONFIG_MFD_SM501. While at it we make sure the r2d code compiles
both with and without SM501.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:50 +09:00
Magnus Damm
2eeec85638 sh: intc - convert board specific r2d code
This patch converts the board specific interrupt code for r2d to make
use of intc. While at it we improve the Kconfig to avoid confusion.

- Two sets of interrupt tables exist - one for R2D-1 and one for R2D-PLUS.
- R2D-1 and R2D-PLUS use the same irq constants.
- R2D-1 has AX88796 support, R2D-PLUS does not hook up that IRQ.
- R2D-PLUS has KEY support, R2D-1 does not hook up that IRQ.
- The number and order of IRQ values are disconnected from register bits.
- Interrupt sources now start from IRQ 100.
- The machvec demux function converts from irlm IRQ 0-14 to IRQ 100++.

Tested on R2D-1 and R2D-PLUS boards.

Version 2 adds CONFIG_RTS7751R2D_1 and CONFIG_RTS7751R2D_PLUS together
with intc structured as __initdata.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:50 +09:00
Magnus Damm
48180cab3a sh: intc - convert voyagergx code
This patch converts the sh-specific voyagergx interrupt code to make use
of intc. A lot of "interesting" old cruft gets replaced with intc tables
and some simple demux code.

- All interrupt sources in the sm501 data sheet are now in the header.
- The number and order of IRQ values are disconnected from register bits.
- Interrupt sources now start from IRQ 200.
- set_irq_chained_handler() is now used to hook up the demux function.

In the future it would probably make sense to move the interrupt demuxer
into into the mfd driver, but this is probably a nice step in the right
direction until that happens.

Tested on a R2D-1 board using the serial port hooked up to the sm501.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:48 +09:00
Magnus Damm
5ca95c48f1 sh: fix cf support on r2d boards
This patch makes sure cf support is enabled on R2D-PLUS but disabled
on R2D-1. Without this fix R2D-1 boards hang on bootup.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-03 10:16:29 +09:00
Magnus Damm
3a353824df sh: zero terminate 8250 platform data for r2d board
struct plat_serial8250_port should contain a terminating zero entry

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 16:34:22 +09:00
Paul Mundt
82f81f4784 sh: Kill off machvec aliases.
We now throw all of the machvecs in to .machvec.init and either
select one on the command line, or copy out the first (and
usually only) one to sh_mv. The rest are freed as usual.

This gets rid of all of the silly sh_mv aliasing and makes the
selection explicit rather than link-order dependent.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:39 +00:00
Paul Mundt
c87a711134 sh: Enable SM501 support for RTS7751R2D.
This enables the SM501 drivers for the R2D board. Additional
work needs to be done to migrate off of the VoyagerGX cchip
code to make use of the rest of the mfd infrastructure.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05 14:13:26 +09:00
Paul Mundt
9c57548f17 sh: rts7751r2d board updates.
This tidies up some of the rts7751r2d mess and gets it booting
again. Update the defconfig, too.

Signed-off-by: Masayuki Hosokawa <hosokawa@ace-jp.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-15 18:20:52 +09:00
Paul Mundt
3b4d953962 sh: heartbeat consolidation for banked LEDs.
This consolidates the various board heartbeat LED implementations,
used for strobing the load average across a LED bank. Those boards
not implementing a full bank can hook in via the LED class.

We leave the compat hook in the machvec for now until those non-banked
boards are able to migrate to the drivers/leds.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 15:42:28 +09:00
Paul Mundt
082c44d20e sh: Cleanup board header directories.
Now with the ide.h mess sorted out, most of these boards
don't need their own directory. Move the headers out, and
update the driver paths.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19 16:30:32 +09:00
Uwe Zeisberger
f30c226954 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:01:26 +02:00
Paul Mundt
2c7834a6f1 sh: machvec rework.
Some more machvec overhauling and setup code cleanup. Kill off
get_system_type() and platform_setup(), we can do these both
through the machvec. While we're add it, kill off more useless
mach.c's and drop some legacy cruft from setup.c.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:17:31 +09:00
Paul Mundt
8599cf0592 sh: Cleanup IRQ disabling for hardirq handlers.
The generic hardirq layer already takes care of a lot of the
appropriate locking and disabling for us, no need to duplicate
it in the handlers..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:03:34 +09:00
Paul Mundt
adf1890b0c sh: Move voyagergx_reg.h to a more sensible place.
Other boards require this as well, so move it out of the
rts7751r2d directory.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:17:27 +09:00
Paul Mundt
ade2b3f6ed sh: VoyagerGX cleanups and 8250 UART support.
This adds the VoyagerGX UART to the RTS7751R2D setup
code, and cleans up a few build issues.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:48:46 +09:00
Paul Mundt
959f85f8a3 sh: Consolidated SH7751/SH7780 PCI support.
This cleans up quite a lot of the PCI mess that we
currently have, and attempts to consolidate the
duplication in the SH7780 and SH7751 PCI controllers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:43:28 +09:00
Paul Mundt
d7cdc9e8ac sh: ioremap() overhaul.
ioremap() overhaul. Add support for transparent PMB mapping, get rid of
p3_ioremap(), etc. Also drop ioremap() and iounmap() routines from the
machvec, as everyone can use the generic ioremap() API instead. For PCI
memory apertures and other special cases, use the pci_iomap() API, as
boards are already required to get the mapping right there.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:16:42 +09:00
Paul Mundt
36efc35447 sh: RTS7751R2D board updates.
More of the same, trivial cleanups, and moving options to their
own board-specific Kconfig.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:02:09 +09:00
Paul Mundt
e4c2cfee5d sh: Various cosmetic cleanups.
We had quite a bit of whitespace damage, clean most of it up..

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 12:31:01 +09:00
Paul Mundt
a56d276c05 sh: Make hs7751rvoip/rts7751r2d use pm_power_off.
These were previously sprinkled in machine_power_off(),
though missed being updated when the rest of the boards
switched over.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 11:43:24 +09:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Ingo Molnar
d1bef4ed5f [PATCH] genirq: rename desc->handler to desc->chip
This patch-queue improves the generic IRQ layer to be truly generic, by adding
various abstractions and features to it, without impacting existing
functionality.

While the queue can be best described as "fix and improve everything in the
generic IRQ layer that we could think of", and thus it consists of many
smaller features and lots of cleanups, the one feature that stands out most is
the new 'irq chip' abstraction.

The irq-chip abstraction is about describing and coding and IRQ controller
driver by mapping its raw hardware capabilities [and quirks, if needed] in a
straightforward way, without having to think about "IRQ flow"
(level/edge/etc.) type of details.

This stands in contrast with the current 'irq-type' model of genirq
architectures, which 'mixes' raw hardware capabilities with 'flow' details.
The patchset supports both types of irq controller designs at once, and
converts i386 and x86_64 to the new irq-chip design.

As a bonus side-effect of the irq-chip approach, chained interrupt controllers
(master/slave PIC constructs, etc.) are now supported by design as well.

The end result of this patchset intends to be simpler architecture-level code
and more consolidation between architectures.

We reused many bits of code and many concepts from Russell King's ARM IRQ
layer, the merging of which was one of the motivations for this patchset.

This patch:

rename desc->handler to desc->chip.

Originally i did not want to do this, because it's a big patch.  But having
both "desc->handler", "desc->handle_irq" and "action->handler" caused a
large degree of confusion and made the code appear alot less clean than it
truly is.

I have also attempted a dual approach as well by introducing a
desc->chip alias - but that just wasnt robust enough and broke
frequently.

So lets get over with this quickly.  The conversion was done automatically
via scripts and converts all the code in the kernel.

This renaming patch is the first one amongst the patches, so that the
remaining patches can stay flexible and can be merged and split up
without having some big monolithic patch act as a merge barrier.

[akpm@osdl.org: build fix]
[akpm@osdl.org: another build fix]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 10:26:21 -07:00
Al Viro
63f716b941 [PATCH] sh: lvalues abuse in arch/sh/boards/renesas/rts7751r2d/io.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-08 01:06:09 -05:00
Al Viro
6dae2c2306 [PATCH] gfp_t: dma-mapping (sh)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28 08:16:48 -07:00
Thomas Gleixner
08d0fd07c3 [PATCH] SH: C99 initializers for hw_interrupt_type structures
Convert the initializers of hw_interrupt_type structures to C99 initializers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:27 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00