Only suspend the video pipeline devices if they were active before
the pm.suspend() helper is called. This patch prevents following error:
/# echo mem > /sys/power/state
[ 34.965000] PM: Syncing filesystems ... done.
[ 35.035000] Freezing user space processes ... (elapsed 0.01 seconds) done.
...
[ 35.105000] dpm_run_callback(): platform_pm_suspend+0x0/0x5c returns -22
[ 35.105000] PM: Device exynos-fimc-lite.1 failed to suspend: error -22
[ 35.105000] PM: Some devices failed to suspend
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The camera clocks managed by the driver were improperly reference counted
and remained disabled when multiple video nodes were opened simultaneously.
It manifested itself with following warning:
[12.920000] WARNING: at drivers/media/video/s5p-fimc/fimc-mdevice.c:787 __fimc_md_set_camclk+0x1c0/0x1dc()
[13.005000] Modules linked in:
[13.005000] Backtrace:
[13.040000] [<c0013084>] (dump_backtrace+0x0/0x10c) from [<c0454b70>] (dump_stack+0x18/0x1c)
[13.070000] r7:00000009 r6:00000313 r5:c02d576c r4:00000000
[13.155000] [<c0454b58>] (dump_stack+0x0/0x1c) from [<c0022ec4>] (warn_slowpath_common+0x54/0x6c)
[13.285000] [<c0022e70>] (warn_slowpath_common+0x0/0x6c) from [<c0022f00>] (warn_slowpath_null+0x24/0x2c)
[13.360000] r9:e1981010 r8:00000000 r7:c061d3fc r6:e1981010 r5:e1981030
[13.430000] r4:00000000
[13.430000] [<c0022edc>] (warn_slowpath_null+0x0/0x2c) from [<c02d576c>] (__fimc_md_set_camclk+0x1c0/0x1dc)
[13.550000] [<c02d55ac>] (__fimc_md_set_camclk+0x0/0x1dc) from [<c02d57b0>] (fimc_md_set_camclk+0x28/0x2c)
[13.630000] [<c02d5788>] (fimc_md_set_camclk+0x0/0x2c) from [<c02d57e8>] (__fimc_pipeline_shutdown+0x34/0x50)
[13.705000] [<c02d57b4>] (__fimc_pipeline_shutdown+0x0/0x50) from [<c02d5844>] (fimc_pipeline_shutdown+0x40/0x58)
[13.765000] r5:e2391200 r4:e2357704
[13.805000] [<c02d5804>] (fimc_pipeline_shutdown+0x0/0x58) from [<c02d4754>] (fimc_capture_close+0xcc/0xe4)
[13.915000] r5:e1b396c0 r4:e2357410
[13.915000] [<c02d4688>] (fimc_capture_close+0x0/0xe4) from [<c02b2d5c>] (v4l2_release+0x5c/0x80)
[13.970000] r7:00000010 r6:e1d2d990 r5:e1b396c0 r4:e2394800
[14.000000] [<c02b2d00>] (v4l2_release+0x0/0x80) from [<c00b66cc>] (fput+0xc0/0x22c)
[14.015000] r5:c157ef30 r4:e1b396c0
[14.015000] [<c00b660c>] (fput+0x0/0x22c) from [<c00b2ca0>] (filp_close+0x60/0x80)
[14.080000] [<c00b2c40>] (filp_close+0x0/0x80) from [<c00b2d78>] (sys_close+0xb8/0xf4)
[14.125000] r7:00000001 r6:e1b396c0 r5:c1400340 r4:c1400300
[14.125000] [<c00b2cc0>] (sys_close+0x0/0xf4) from [<c000f300>] (ret_fast_syscall+0x0/0x30)
[14.205000] r7:00000006 r6:beee5b94 r5:00000003 r4:b6f64fac
Fix this, as well as potential memory leaks due to not calling
v4l2_fh_release() on some error paths.
Also remove some error logs printed for events that aren't critical and
are normal conditions for some system configurations.
Also check if the device have been properly run-time enabled during
video node open.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The checks are already done at the v4l2 framework.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Allow memory buffer size to be increased by means of
struct v4l2_pix_plane_format::sizeimage at VIDIOC_S_FMT ioctl.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The driver is supposed to create active media link from sensor N
(or its corresponding s5p-mipi-csis entity) to FIMC.N by default.
Instead s5p-mipi-csis.N entity gets always connected by a default
active link to FIMC.N, regardless of there are parallel bus sensor
entities already connected to FIMC.N. Correct this.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When video pipeline initialization fails, the ST_CAPT_BUSY flag
needs to be cleared before pm_runtime_put_sync is called.
Otherwise the runtime suspend routine tries to suspend device,
rather than just turning it off. Also fix potential null pointer
dereference in fimc_pipeline_shutdown().
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The switch/case was setting clock_setting that is not being used. Both switch/case and the variable definition were removed.
Currently clock is being calculated by the formula:
(state->fclk/1000000 - 8)
Tested by compilation only.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In function saa7164_api_i2c_read variable regval was set but not used.
Tested by compilation only.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Saves 255 bytes of stack memory on cx231xx_usb_probe() by removing a char array.
Tested by compilation only.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Commit 39c3d48845 ("[media] cpia, stradis:
remove deprecated V4L1 drivers") removed the last file including these
five headers. Apparently it was just an oversight to keep them in the
tree. They can safely be removed now.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The windows driver used different values for the GPIOs and analog
decoder configuration. The values from the windows driver are now
used.
It also seems that the windows driver has LNA always disabled.
Thus we are doing the same (using the same flags as on windows).
I (only) tested with DVB-T and it worked quite well.
[mchehab@redhat.com: Fix merge conflicts and tested with DVB-C]
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As of June 2012 it uses the same firmware as the Hauppauge WinTV HVR 930C.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Convert radio-aimslab to use generic LM7000 driver.
Tested with Reveal RA300.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add very simple driver for Sanyo LM7000 AM/FM tuner chip. Only FM is supported
as there is no known HW with AM implemented.
This will be used by radio-aimslab and radio-sf16fmi.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There is a specific header sound/ac97_codec.h that defines these.
All drivers should use it instead of rolling its own set of macros.
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver allowed only one open filehandle. This is against the spec, so
fix the driver by assigning proper ownership when streaming.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Implement struct v4l2_device: use the core lock and use the v4l2_device
release() callback.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Embed the video_device struct instead of allocating it and register it as
the last thing in probe().
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/pms.c uses kzalloc() and kfree() so it should
include <linux/slab.h> to fix build errors and a warning.
drivers/media/video/pms.c:1047:2: error: implicit declaration of function 'kzalloc'
drivers/media/video/pms.c:1047:6: warning: assignment makes pointer from integer without a cast
drivers/media/video/pms.c:1116:2: error: implicit declaration of function 'kfree'
Found in mmotm but applies to mainline.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Set the new capability flags in G_TUNER and return ENODATA if no channels
were found.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Update the spec with the new capabilities and specify new error codes for
S_HW_FREQ_SEEK.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tell the application whether the hardware seek is bounded and/or wraps around.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The V4L2 spec says reporting mono and stereo at the same time means
the hardware can not distinguish between the two. So when we can,
we should report only one of them.
Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Many of the audio decoders handled by the driver support this mode,
so the driver should support it as well.
Coding style errors are done to blend into the surrounding code.
Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
V4L2 specifies the audio mode to use for combinations of possible
(rxsubchans) and requested (audmode) audio modes. Up to now tvaudio
has made these decisions automatically based on the possible audio
modes from setting of the frequency until VIDIOC_S_TUNER was called.
It then forced the hardware to use the mode requested by the user.
With this patch it continues to adjust the audio mode while taking
the requested mode into account.
Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The V4L2_TUNER_MODE_* constants are not suited for use in bitfields.
Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Judging from the data sheet it will automatically switch to the next
best audio mode in accordance with the V4L2 tuner audio matrix.
Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As V4L2_TUNER_MODE_SAP == V4L2_TUNER_MODE_LANG2, we make
V4L2_TUNER_MODE_LANG1 equal to V4L2_TUNER_MODE_STEREO.
Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
These constants were unused so far but need | instead of &.
Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fix a compiler breakage introduced by commit 8173090acb:
drivers/media/video/pms.c: In function ‘pms_probe’:
drivers/media/video/pms.c:1047:2: error: implicit declaration of function ‘kzalloc’ [-Werror=implicit-function-declaration]
drivers/media/video/pms.c:1116:2: error: implicit declaration of function ‘kfree’ [-Werror=implicit-function-declaration]
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In function fops_open variable type was set but not used. Tested by compilation only.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Michael Hunold <michael@mihu.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
