The recent display subsystem (DSS) related platform data changes caused
display related regressions for suspend and resume. Looks like I only
tested suspend and resume before dropping the legacy platform data, and
forgot to test it after dropping it. Turns out the main issue was that
we no longer have platform code calling pm_runtime_suspend for DSS like
we did for the legacy platform data case, and that fix is still being
discussed on the dri-devel list and will get merged separately. The DSS
related testing exposed a pile other other display related issues that
also need fixing though:
- Fix ti-sysc optional clock handling and reset status checks
for devices that reset automatically in idle like DSS
- Ignore ti-sysc clockactivity bit unless separately requested
to avoid unexpected performance issues
- Init ti-sysc framedonetv_irq to true and disable for am4
- Avoid duplicate DSS reset for legacy mode with dts data
- Remove LCD timings for am4 as they cause warnings now that we're
using generic panels
Then there is a pile of other fixes not related to the DSS:
- Fix omap_prm reset deassert as we still have drivers setting the
pm_runtime_irq_safe() flag
- Flush posted write for ti-sysc enable and disable
- Fix droid4 spi related errors with spi flags
- Fix am335x USB range and a typo for softreset
- Fix dra7 timer nodes for clocks for IPU and DSP
- Drop duplicate mailboxes after mismerge for dra7
-----BEGIN PGP SIGNATURE-----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=fT9A
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.8
The recent display subsystem (DSS) related platform data changes caused
display related regressions for suspend and resume. Looks like I only
tested suspend and resume before dropping the legacy platform data, and
forgot to test it after dropping it. Turns out the main issue was that
we no longer have platform code calling pm_runtime_suspend for DSS like
we did for the legacy platform data case, and that fix is still being
discussed on the dri-devel list and will get merged separately. The DSS
related testing exposed a pile other other display related issues that
also need fixing though:
- Fix ti-sysc optional clock handling and reset status checks
for devices that reset automatically in idle like DSS
- Ignore ti-sysc clockactivity bit unless separately requested
to avoid unexpected performance issues
- Init ti-sysc framedonetv_irq to true and disable for am4
- Avoid duplicate DSS reset for legacy mode with dts data
- Remove LCD timings for am4 as they cause warnings now that we're
using generic panels
Then there is a pile of other fixes not related to the DSS:
- Fix omap_prm reset deassert as we still have drivers setting the
pm_runtime_irq_safe() flag
- Flush posted write for ti-sysc enable and disable
- Fix droid4 spi related errors with spi flags
- Fix am335x USB range and a typo for softreset
- Fix dra7 timer nodes for clocks for IPU and DSP
- Drop duplicate mailboxes after mismerge for dra7
* tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
Revert "bus: ti-sysc: Increase max softreset wait"
ARM: dts: am437x-epos-evm: remove lcd timings
ARM: dts: am437x-gp-evm: remove lcd timings
ARM: dts: am437x-sk-evm: remove lcd timings
ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes
ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks
ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag
ARM: dts: Fix am33xx.dtsi USB ranges length
bus: ti-sysc: Increase max softreset wait
ARM: OMAP2+: Fix legacy mode dss_reset
bus: ti-sysc: Fix uninitialized framedonetv_irq
bus: ti-sysc: Ignore clockactivity unless specified as a quirk
bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit
ARM: dts: omap4-droid4: Fix spi configuration and increase rate
bus: ti-sysc: Flush posted write on enable and disable
soc: ti: omap-prm: use atomic iopoll instead of sleeping one
Link: https://lore.kernel.org/r/pull-1591889257-410830@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The cell name stored in the afs_cell struct is a 64-char + NUL buffer -
when it needs to be able to handle up to AFS_MAXCELLNAME (256 chars) + NUL.
Fix this by changing the array to a pointer and allocating the string.
Found using Coverity.
Fixes: 989782dcdc ("afs: Overhaul cell database management")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit cd238effef ("docs: kbuild: convert docs to ReST and rename to
*.rst") missed a ReST header and a verbatim file content area.
Signed-off-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5BTi
-----END PGP SIGNATURE-----
Merge tag '5.8-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Six cifs/smb3 fixes, three of them for stable.
Fixes xfstests 451, 313 and 316"
* tag '5.8-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: misc: Use array_size() in if-statement controlling expression
cifs: update ctime and mtime during truncate
cifs/smb3: Fix data inconsistent when punch hole
cifs/smb3: Fix data inconsistent when zero file range
cifs: Fix double add page to memcg when cifs_readpages
cifs: Fix cached_fid refcnt leak in open_shroot
Six small fixes, five in drivers and one to correct another minor
regression from cc97923a5b ("block: move dma drain handling to
scsi") where we still need the drain stub to be built in to the kernel
for the modular libata, non-modular SAS driver case.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXvdzJCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZ9rAQDyfZbP
IIIqNRr8MSBVxnb50LjmLl4NZH7xWzjch0oRfwD/ZS/QRoe/nNQUsiW65yK83ueC
QBz3bxQWAwKm0yFGzqY=
=gHK+
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six small fixes, five in drivers and one to correct another minor
regression from cc97923a5b ("block: move dma drain handling to
scsi") where we still need the drain stub to be built in to the kernel
for the modular libata, non-modular SAS driver case"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mptscsih: Fix read sense data size
scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action
scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset()
scsi: libata: Fix the ata_scsi_dma_need_drain stub
scsi: qla2xxx: Keep initiator ports after RSCN
scsi: qla2xxx: Set NVMe status code for failed NVMe FCP request
Pull i2c fixes from Wolfram Sang:
"This contains a 5.8 regression fix for the Designware driver, a
register bitfield fix for the fsi driver, and a missing sanity check
for the I2C core"
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: check returned size of emulated smbus block read
i2c: fsi: Fix the port number field in status register
i2c: designware: Adjust bus speed independently of ACPI
Here are a small number of tiny staging driver fixes for 5.8-rc3.
Not much here, but there were some reported problems to be fixed:
- 3 wfx driver fixes
- rtl8723bs driver fix
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXvcv3A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynlKQCgty4E/Ey6Tfi6RhskXoR6qY0h0ooAmgNUsVvc
qpuJ2oK5bC4pwYtXBEFt
=dTn7
-----END PGP SIGNATURE-----
Merge tag 'staging-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are a small number of tiny staging driver fixes for 5.8-rc3.
Not much here, but there were some reported problems to be fixed:
- three wfx driver fixes
- rtl8723bs driver fix
All of these have been in linux-next with no reported issues"
* tag 'staging-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Staging: rtl8723bs: prevent buffer overflow in update_sta_support_rate()
staging: wfx: fix coherency of hif_scan() prototype
staging: wfx: drop useless loop
staging: wfx: fix AC priority
Here are some small USB fixes for 5.8-rc3 to resolve some reported
issues.
Nothing major here:
- gadget driver fixes
- cdns3 driver fixes
- xhci fixes
- renesas_usbhs driver fixes
- some new device support with ids
- documentation update
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXvcu5w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymcewCgrSLzmFCeXWeoK5qIyv+hRaBu1eoAoJ2eDihC
5ahPGEU1CGstW3Rp0Yhv
=LAT6
-----END PGP SIGNATURE-----
Merge tag 'usb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.8-rc3 to resolve some reported
issues.
Nothing major here:
- gadget driver fixes
- cdns3 driver fixes
- xhci fixes
- renesas_usbhs driver fixes
- some new device support with ids
- documentation update
All of these have been in linux-next with no reported issues"
* tag 'usb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits)
usb: renesas_usbhs: getting residue from callback_result
Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"
xhci: Poll for U0 after disabling USB2 LPM
xhci: Return if xHCI doesn't support LPM
usb: host: xhci-mtk: avoid runtime suspend when removing hcd
xhci: Fix enumeration issue when setting max packet size for FS devices.
xhci: Fix incorrect EP_STATE_MASK
usb: cdns3: ep0: add spinlock for cdns3_check_new_setup
usb: cdns3: trace: using correct dir value
usb: cdns3: ep0: fix the test mode set incorrectly
Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"
usb: gadget: udc: Potential Oops in error handling code
usb: phy: tegra: Fix unnecessary check in tegra_usb_phy_probe()
usb: dwc3: pci: Fix reference count leak in dwc3_pci_resume_work
usb: cdns3: ep0: add spinlock for cdns3_check_new_setup
usb: cdns3: trace: using correct dir value
usb: cdns3: ep0: fix the test mode set incorrectly
usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs
USB: ohci-sm501: Add missed iounmap() in remove
cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip
...
Some tiny char/misc driver fixes for 5.8-rc3.
"largest" changes are in the mei driver, to resolve some reported
problems and add some new device ids. There's also a binder bugfix, an
fpga driver build fix, and some assorted habanalabs fixes.
All of these, except for the habanalabs fixes, have been in linux-next
with no reported issues. The habanalabs driver changes showed up in my
tree on Friday, but as they are totally self-contained, all should be
good there.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXvcvdw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymUegCfef+R3pnqXZMwhFq78cbwqjk7eEoAn0YI2E4E
f3o8/tqTRpE2JzU1iCaM
=IXum
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Some tiny char/misc driver fixes for 5.8-rc3.
The "largest" changes are in the mei driver, to resolve some reported
problems and add some new device ids. There's also a binder bugfix, an
fpga driver build fix, and some assorted habanalabs fixes.
All of these, except for the habanalabs fixes, have been in linux-next
with no reported issues. The habanalabs driver changes showed up in my
tree on Friday, but as they are totally self-contained, all should be
good there"
* tag 'char-misc-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: increase h/w timer when checking idle
habanalabs: Correct handling when failing to enqueue CB
habanalabs: increase GAUDI QMAN ARB WDT timeout
habanalabs: rename mmu_write() to mmu_asid_va_write()
habanalabs: use PI in MMU cache invalidation
habanalabs: block scalar load_and_exe on external queue
mei: me: add tiger lake point device ids for H platforms.
mei: me: disable mei interface on Mehlow server platforms
binder: fix null deref of proc->context
fpga: zynqmp: fix modular build
rate on family 0x15 CPUs
-----BEGIN PGP SIGNATURE-----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=Ti/g
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
"A single fix for amd64_edac restoring the reporting of the DRAM scrub
rate on family 0x15 CPUs"
* tag 'edac_urgent_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Read back the scrub rate PCI register on F15h
Stable Fixes:
- xprtrdma: Fix handling of RDMA_ERROR replies
- sunrpc: Fix rollback in rpc_gssd_dummy_populate()
- pNFS/flexfiles: Fix list corruption if the mirror count changes
- NFSv4: Fix CLOSE not waiting for direct IO completion
- SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()
Other Fixes:
- xprtrdma: Fix a use-after-free with r_xprt->rx_ep
- Fix other xprtrdma races during disconnect
- NFS: Fix memory leak of export_path
-----BEGIN PGP SIGNATURE-----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=BzX9
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.8-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client bugfixes from Anna Schumaker:
"Stable Fixes:
- xprtrdma: Fix handling of RDMA_ERROR replies
- sunrpc: Fix rollback in rpc_gssd_dummy_populate()
- pNFS/flexfiles: Fix list corruption if the mirror count changes
- NFSv4: Fix CLOSE not waiting for direct IO completion
- SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()
Other Fixes:
- xprtrdma: Fix a use-after-free with r_xprt->rx_ep
- Fix other xprtrdma races during disconnect
- NFS: Fix memory leak of export_path"
* tag 'nfs-for-5.8-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()
NFSv4 fix CLOSE not waiting for direct IO compeletion
pNFS/flexfiles: Fix list corruption if the mirror count changes
nfs: Fix memory leak of export_path
sunrpc: fixed rollback in rpc_gssd_dummy_populate()
xprtrdma: Fix handling of RDMA_ERROR replies
xprtrdma: Clean up disconnect
xprtrdma: Clean up synopsis of rpcrdma_flush_disconnect()
xprtrdma: Use re_connect_status safely in rpcrdma_xprt_connect()
xprtrdma: Prevent dereferencing r_xprt->rx_ep after it is freed
-----BEGIN PGP SIGNATURE-----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=ar3Q
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.8-2020-06-26' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Three small fixes:
- Close a corner case for polled IO resubmission (Pavel)
- Toss commands when exiting (Pavel)
- Fix SQPOLL conditional reschedule on perpetually busy submit
(Xuan)"
* tag 'io_uring-5.8-2020-06-26' of git://git.kernel.dk/linux-block:
io_uring: fix current->mm NULL dereference on exit
io_uring: fix hanging iopoll in case of -EAGAIN
io_uring: fix io_sq_thread no schedule when busy
-----BEGIN PGP SIGNATURE-----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=pQH7
-----END PGP SIGNATURE-----
Merge tag 'block-5.8-2020-06-26' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- multipath deadlock fixes (Anton)
- NUMA fixes (Max)
- RDMA completion vector fix (Max)
- IO deadlock fix (Sagi)
- multipath reference fix (Sagi)
- NS mutation fix (Sagi)
- Use right allocator when freeing bip in error path (Chengguang)
* tag 'block-5.8-2020-06-26' of git://git.kernel.dk/linux-block:
nvme-multipath: fix bogus request queue reference put
nvme-multipath: fix deadlock due to head->lock
nvme: don't protect ns mutation with ns->head->lock
nvme-multipath: fix deadlock between ana_work and scan_work
nvme: fix possible deadlock when I/O is blocked
nvme-rdma: assign completion vector correctly
nvme-loop: initialize tagset numa value to the value of the ctrl
nvme-tcp: initialize tagset numa value to the value of the ctrl
nvme-pci: initialize tagset numa value to the value of the ctrl
nvme-pci: override the value of the controller's numa node
nvme: set initial value for controller's numa node
block: release bip in a right way in error path
Considering the amount of dm-zoned changes that went in during the
5.8 merge window these fixes are not that surprising.
- A few DM writecache target fixes.
- A fix to Documentation index to include DM ebs target docs.
- Small cleanup to use struct_size() in DM core's retrieve_deps().
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl72SdYTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWtzXB/4y42NJLrH8EXNW/bGIpPlexpbWRW29
5z6V1VL/q/s9AWrDunLsvhMAtx38FjHJO6i8GQld/gKRtEbOMHfEItsyrQZqKoSr
M1NzlthuwFnUS30Uq6i06/ihdH5DDEhTElLs7+Q7pvNUd+KiI0mTgM/y856x3s4p
4OMG1qEi6AnwvYFyCgu/w7/LLBYRipis+j+cm9Y0cTZujh4QBTeeQdBsu++fit2G
7U1jkddiQSlb8DrbziRt9JK5WrvR4WpQmP9bnK1SxZtKY/55ZNpuNmFnUmUCgUAY
Y7CEafoElJ6XYTBzKgYSDqY/eutXSzaxn1euDWizDS4H7kdgDS+3uVT9
=zq2g
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Quite a few DM zoned target fixes and a Zone append fix in DM core.
Considering the amount of dm-zoned changes that went in during the
5.8 merge window these fixes are not that surprising.
- A few DM writecache target fixes.
- A fix to Documentation index to include DM ebs target docs.
- Small cleanup to use struct_size() in DM core's retrieve_deps().
* tag 'for-5.8/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm writecache: add cond_resched to loop in persistent_memory_claim()
dm zoned: Fix reclaim zone selection
dm zoned: Fix random zone reclaim selection
dm: update original bio sector on Zone Append
dm zoned: Fix metadata zone size check
docs: device-mapper: add dm-ebs.rst to an index file
dm ioctl: use struct_size() helper in retrieve_deps()
dm writecache: skip writecache_wait when using pmem mode
dm writecache: correct uncommitted_block when discarding uncommitted entry
dm zoned: assign max_io_len correctly
dm zoned: fix uninitialized pointer dereference
The main change here is a fix for a number of unsafe interactions
between kdb and the console system. The fixes are specific to kdb (pure
kgdb debugging does not use the console system at all). On systems with
an NMI then kdb, if it is enabled, must get messages to the user despite
potentially running from some "difficult" calling contexts. These fixes
avoid using the console system where we have been provided an
alternative (safer) way to interact with the user and, if using the
console system in unavoidable, use oops_in_progress for deadlock
avoidance. These fixes also ensure kdb honours the console enable flag.
Also included is a fix that wraps kgdb trap handling in an RCU read lock
to avoids triggering diagnostic warnings. This is a wide lock scope but
this is OK because kgdb is a stop-the-world debugger. When we stop the
world we put all the CPUs into holding pens and this inhibits RCU update
anyway.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=ovnT
-----END PGP SIGNATURE-----
Merge tag 'kgdb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb fixes from Daniel Thompson:
"The main change here is a fix for a number of unsafe interactions
between kdb and the console system. The fixes are specific to kdb
(pure kgdb debugging does not use the console system at all). On
systems with an NMI then kdb, if it is enabled, must get messages to
the user despite potentially running from some "difficult" calling
contexts. These fixes avoid using the console system where we have
been provided an alternative (safer) way to interact with the user
and, if using the console system in unavoidable, use oops_in_progress
for deadlock avoidance. These fixes also ensure kdb honours the
console enable flag.
Also included is a fix that wraps kgdb trap handling in an RCU read
lock to avoids triggering diagnostic warnings. This is a wide lock
scope but this is OK because kgdb is a stop-the-world debugger. When
we stop the world we put all the CPUs into holding pens and this
inhibits RCU update anyway"
* tag 'kgdb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kgdb: Avoid suspicious RCU usage warning
kdb: Switch to use safer dbg_io_ops over console APIs
kdb: Make kdb_printf() console handling more robust
kdb: Check status of console prior to invoking handlers
kdb: Re-factor kdb_printf() message write code
A fix for a crash in nested KVM when CONFIG_DEBUG_VIRTUAL=y.
Two minor build fixes.
Thanks to:
Aneesh Kumar K.V, Arseny Solokha, Harish.
-----BEGIN PGP SIGNATURE-----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=TvGN
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for a crash in nested KVM when CONFIG_DEBUG_VIRTUAL=y.
- Two minor build fixes.
Thanks to: Aneesh Kumar K.V, Arseny Solokha, Harish.
* tag 'powerpc-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix build failure in ebb tests
powerpc/kvm/book3s64: Fix kernel crash with nested kvm & DEBUG_VIRTUAL
powerpc/fsl_booke/32: Fix build with CONFIG_RANDOMIZE_BASE
This contains a handful of fixes I'd like to target for rc3. Most of them fix
issues with the conversion of our vDSO to C. There is also one fix to the
SiFive PRCI driver that I picked up as it's causing boot issues on the
hardware.
* A fix to allow kernels with dynamic ftrace to use the vDSO.
* Some build fixes for the C vDSO functions.
* A fix to the PRCI driver's memory allocation, which was the cause of some
boot panics with FREELIST_RANDOM.
-----BEGIN PGP SIGNATURE-----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=Pupr
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"This contains a handful of fixes I'd like to target for rc3.
Most of them fix issues with the conversion of our vDSO to C. There is
also one fix to the SiFive PRCI driver that I picked up as it's
causing boot issues on the hardware.
- A fix to allow kernels with dynamic ftrace to use the vDSO.
- Some build fixes for the C vDSO functions.
- A fix to the PRCI driver's memory allocation, which was the cause
of some boot panics with FREELIST_RANDOM"
* tag 'riscv-for-linus-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup __vdso_gettimeofday broke dynamic ftrace
riscv: Add extern declarations for vDSO time-related functions
clk: sifive: allocate sufficient memory for struct __prci_data
riscv: Add -fPIC option to CFLAGS_vgettimeofday.o
- Fix unwinding through vDSO sigreturn trampoline
- Fix build warnings by raising minimum LD version for PAC
- Whitelist some Kryo Cortex-A55 derivatives for Meltdown and SSB
- Fix perf register PC reporting for compat tasks
- Fix 'make clean' warning for arm64 signal selftests
- Fix ftrace when BTI is compiled in
- Avoid building the compat vDSO using GCC plugins
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl71tgEQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNB5sB/48VLEeDtkRtHVQntLG9SFogwDkHjkRW/lo
kgO5APEcdhZZq3mBY2fIww5iX5Et7vRpx8ovempmqZGhO9B4ZMSNG0DFxoYdtXTU
jgox+LzkW+hYldK1Bv03ioLZgIz6Lc8zyK6kRB7NuDN88VEVds0ksYmcAojeIN9b
vmpquEAoVppm0VPjt6VA0xQ6HtiKfvlV7PW6Pqs0dKovnNY982jRXBMzaGBbDFQ7
3eKmW4PBru/Ew16J172vf/0sBJQBiZrSdXCqv/USKvPHkUDkJiYsaWLpsWx4m4to
bE/OS6aWx94NcgxPUca3y2G2OhPU+VFiXjuJ0kvzt4EJIuW/CGUf
=2kBR
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The big fix here is to our vDSO sigreturn trampoline as, after a
painfully long stint of debugging, it turned out that fixing some of
our CFI directives in the merge window lit up a bunch of logic in
libgcc which has been shown to SEGV in some cases during asynchronous
pthread cancellation.
It looks like we can fix this by extending the directives to restore
most of the interrupted register state from the sigcontext, but it's
risky and hard to test so we opted to remove the CFI directives for
now and rely on the unwinder fallback path like we used to.
- Fix unwinding through vDSO sigreturn trampoline
- Fix build warnings by raising minimum LD version for PAC
- Whitelist some Kryo Cortex-A55 derivatives for Meltdown and SSB
- Fix perf register PC reporting for compat tasks
- Fix 'make clean' warning for arm64 signal selftests
- Fix ftrace when BTI is compiled in
- Avoid building the compat vDSO using GCC plugins"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add KRYO{3,4}XX silver CPU cores to SSB safelist
arm64: perf: Report the PC value in REGS_ABI_32 mode
kselftest: arm64: Remove redundant clean target
arm64: kpti: Add KRYO{3, 4}XX silver CPU cores to kpti safelist
arm64: Don't insert a BTI instruction at inner labels
arm64: vdso: Don't use gcc plugins for building vgettimeofday.c
arm64: vdso: Only pass --no-eh-frame-hdr when linker supports it
arm64: Depend on newer binutils when building PAC
arm64: compat: Remove 32-bit sigreturn code from the vDSO
arm64: compat: Always use sigpage for sigreturn trampoline
arm64: compat: Allow 32-bit vdso and sigpage to co-exist
arm64: vdso: Disable dwarf unwinding through the sigreturn trampoline
The mpt fusion driver still uses the legacy PCI DMA API which hardcodes
atomic allocations. This caused the driver to fail to load on some powerpc
VMs with incoherent DMA and small memory sizes. Switch to use the modern
DMA API and sleeping allocations for large allocations instead. This is
not a full cleanup of the PCI DMA API usage yet, but just enough to fix the
regression caused by reducing the default atomic pool size.
Link: https://lore.kernel.org/r/20200624165724.1818496-1-hch@lst.de
Fixes: 3ee06a6d53 ("dma-pool: fix too large DMA pools on medium memory size systems")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When an rport event (RPORT_EV_READY) is updated without work being queued,
avoid taking an additional reference.
This issue was leading to memory leak. Trace from KMEMLEAK tool:
unreferenced object 0xffff8888259e8780 (size 512):
comm "kworker/2:1", jiffies 4433237386 (age 113021.971s)
hex dump (first 32 bytes):
58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00
01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10
backtrace:
[<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc]
[<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc]
[<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
[<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
[<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf]
[<00000000e0eb6893>] process_one_work+0x382/0x6c0
[<000000002dfd9e21>] worker_thread+0x57/0x5c0
[<00000000b648204f>] kthread+0x1a0/0x1c0
[<0000000072f5ab20>] ret_from_fork+0x35/0x40
[<000000001d5c05d8>] 0xffffffffffffffff
Below is the log sequence which leads to memory leak. Here we get the
RPORT_EV_READY and RPORT_EV_STOP back to back, which lead to overwrite the
event RPORT_EV_READY by event RPORT_EV_STOP. Because of this, kref_count
gets incremented by 1.
kernel: host0: rport fffce5: Received PLOGI request
kernel: host0: rport fffce5: Received PLOGI in INIT state
kernel: host0: rport fffce5: Port is Ready
kernel: host0: rport fffce5: Received PRLI request while in state Ready
kernel: host0: rport fffce5: PRLI rspp type 8 active 1 passive 0
kernel: host0: rport fffce5: Received LOGO request while in state Ready
kernel: host0: rport fffce5: Delete port
kernel: host0: rport fffce5: Received PLOGI request
kernel: host0: rport fffce5: Received PLOGI in state Delete - send busy
kernel: host0: rport fffce5: work event 3
kernel: host0: rport fffce5: lld callback ev 3
kernel: host0: rport fffce5: work delete
Link: https://lore.kernel.org/r/20200626094959.32151-1-jhasan@marvell.com
Reviewed-by: Girish Basrur <gbasrur@marvell.com>
Reviewed-by: Saurav Kashyap <skashyap@marvell.com>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Handling of extra kref which is done by lookup table in case rdata is
already present in list.
This issue was leading to memory leak. Trace from KMEMLEAK tool:
unreferenced object 0xffff8888259e8780 (size 512):
comm "kworker/2:1", pid 182614, jiffies 4433237386 (age 113021.971s)
hex dump (first 32 bytes):
58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00
01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10
backtrace:
[<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc]
[<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc]
[<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
[<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf]
[<00000000e0eb6893>] process_one_work+0x382/0x6c0
[<000000002dfd9e21>] worker_thread+0x57/0x5c0
[<00000000b648204f>] kthread+0x1a0/0x1c0
[<0000000072f5ab20>] ret_from_fork+0x35/0x40
[<000000001d5c05d8>] 0xffffffffffffffff
Below is the log sequence which leads to memory leak. Here we get the
nested "Received PLOGI request" for same port and this request leads to
call the fc_rport_create() twice for the same rport.
kernel: host1: rport fffce5: Received PLOGI request
kernel: host1: rport fffce5: Received PLOGI in INIT state
kernel: host1: rport fffce5: Port is Ready
kernel: host1: rport fffce5: Received PRLI request while in state Ready
kernel: host1: rport fffce5: PRLI rspp type 8 active 1 passive 0
kernel: host1: rport fffce5: Received LOGO request while in state Ready
kernel: host1: rport fffce5: Delete port
kernel: host1: rport fffce5: Received PLOGI request
kernel: host1: rport fffce5: Received PLOGI in state Delete - send busy
Link: https://lore.kernel.org/r/20200622101212.3922-2-jhasan@marvell.com
Reviewed-by: Girish Basrur <gbasrur@marvell.com>
Reviewed-by: Saurav Kashyap <skashyap@marvell.com>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This code doesn't make sense unless the correct "fcport" was found.
Link: https://lore.kernel.org/r/20200619143041.GD267142@mwanda
Fixes: 9dd9686b14 ("scsi: qla2xxx: Add changes for devloss timeout in driver")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Partial revert of some recent fixes to silence DTC warning which broke
clocks on some Vexpress platforms resulting in boot issues.
-----BEGIN PGP SIGNATURE-----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=2f3w
-----END PGP SIGNATURE-----
Merge tag 'juno-fix-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
ARMv8 Juno/Vexpress/Fast Models fix for v5.8
Partial revert of some recent fixes to silence DTC warning which broke
clocks on some Vexpress platforms resulting in boot issues.
* tag 'juno-fix-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm: dts: vexpress: Move mcc node back into motherboard node
Link: https://lore.kernel.org/r/20200609180447.GB5732@bogus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When separating out different phases of running tests[1]
(build/exec/parse/etc), the format of the KunitResult tuple changed
(adding an elapsed_time variable). This is not populated during a build
failure, causing kunit.py to crash.
This fixes [1] to probably populate the result variable, causing a
failing build to be reported properly.
[1]:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=45ba7a893ad89114e773b3dc32f6431354c465d6
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, if the kernel is configured incorrectly or if it crashes before any
kunit tests are run, kunit finishes without error, reporting
that 0 test cases were run.
To fix this, an error is shown when the tap header is not found, which
indicates that kunit was not able to run at all.
Signed-off-by: Uriel Guajardo <urielguajardo@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 8b59cd81dc ("kbuild: ensure full rebuild when the compiler is
updated") introduced a new CONFIG option CONFIG_CC_VERSION_TEXT. On my
system, this is set to "gcc (GCC) 10.1.0" which breaks KUnit config
parsing which did not like the spaces in the string.
Fix this by updating the regex to allow strings containing spaces.
Fixes: 8b59cd81dc ("kbuild: ensure full rebuild when the compiler is updated")
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Prevent bypassing kernel lockdown via the ACPI tables loading
interface (Jason A. Donenfeld) and fix the handling of an ACPI
sysfs attribute (Nathan Chancellor).
-----BEGIN PGP SIGNATURE-----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=w+l+
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Prevent bypassing kernel lockdown via the ACPI tables loading
interface (Jason A. Donenfeld) and fix the handling of an ACPI sysfs
attribute (Nathan Chancellor)"
* tag 'acpi-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: sysfs: Fix pm_profile_attr type
ACPI: configfs: Disallow loading ACPI tables when locked down
- Make sure that the _TIF_POLLING_NRFLAG is clear before entering
the last phase of suspend-to-idle to avoid wakeup issues on some
x86 systems (Chen Yu, Rafael Wysocki).
- Cover one more case in which the intel_pstate driver should let
the platform firmware control the CPU frequency and refuse to
load (Srinivas Pandruvada).
- Add __init annotations to 2 functions in the power management
core (Christophe JAILLET).
-----BEGIN PGP SIGNATURE-----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=Reud
-----END PGP SIGNATURE-----
Merge tag 'pm-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a recent regression that broke suspend-to-idle on some x86
systems, fix the intel_pstate driver to correctly let the platform
firmware control CPU performance in some cases and add __init
annotations to a couple of functions.
Specifics:
- Make sure that the _TIF_POLLING_NRFLAG is clear before entering the
last phase of suspend-to-idle to avoid wakeup issues on some x86
systems (Chen Yu, Rafael Wysocki).
- Cover one more case in which the intel_pstate driver should let the
platform firmware control the CPU frequency and refuse to load
(Srinivas Pandruvada).
- Add __init annotations to 2 functions in the power management core
(Christophe JAILLET)"
* tag 'pm-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: Rearrange s2idle-specific idle state entry code
PM: sleep: core: mark 2 functions as __init to save some memory
cpufreq: intel_pstate: Add one more OOB control bit
PM: s2idle: Clear _TIF_POLLING_NRFLAG before suspend to idle
A couple of Intel VT-d fixes:
- Make Intel SVM code 64bit only. The code uses pgd_t* and the
IOMMU only supports long-mode page-table formats, so its
broken on 32bit anyway.
- Make sure GFX quirks in for Intel VT-d are not applied to
untrusted devices. Those devices might gain full memory access
otherwise.
- Identity mapping setup fix.
- Fix ACS enabling when Intel IOMMU is off and untrusted devices
are detected.
- Two smaller fixes for coherency and IO page-table setup
-----BEGIN PGP SIGNATURE-----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=RRP5
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"A couple of Intel VT-d fixes:
- Make Intel SVM code 64bit only. The code uses pgd_t* and the IOMMU
only supports long-mode page-table formats, so its broken on 32bit
anyway.
- Make sure GFX quirks in for Intel VT-d are not applied to untrusted
devices. Those devices might gain full memory access otherwise.
- Identity mapping setup fix.
- Fix ACS enabling when Intel IOMMU is off and untrusted devices are
detected.
- Two smaller fixes for coherency and IO page-table setup"
* tag 'iommu-fixes-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix misuse of iommu_domain_identity_map()
iommu/vt-d: Update scalable mode paging structure coherency
iommu/vt-d: Enable PCI ACS for platform opt in hint
iommu/vt-d: Don't apply gfx quirks to untrusted devices
iommu/vt-d: Set U/S bit in first level page table by default
iommu/vt-d: Make Intel SVM code 64-bit only
Here is one (late) fix for 5.8-rc1 merge window.
Arnd's change addresses a missing build dependency.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIUEABYIAC0WIQS/ea/a56fFi9QbQeJ+E8eWOj6VqQUCXt+thw8cbWRmQGtlcm5l
bC5vcmcACgkQfhPHljo+lanY3QEAwEm3chGzlQ9+dYwiw8wiLDu8h8mBZh7iRsWV
Qk+tO0cA/14nUYrAIOsfVxTg5XOG4C6gE6EWib2c2jjpVYbIm98J
=XnNj
-----END PGP SIGNATURE-----
Merge tag 'fpga-fixes-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next
FPGA Manager fixes for 5.8-rc1
Here is one (late) fix for 5.8-rc1 merge window.
Arnd's change addresses a missing build dependency.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-fixes-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: zynqmp: fix modular build
- close security hole in GAUDI command buffer parsing by blocking an
instruction that might allow user to run command buffer that wasn't
parsed on a secured engine.
- Fix bug in GAUDI MMU cache invalidation code.
- Rename a function to resolve conflict with a static inline function in
arch/m68k/include/asm/mcfmmu.h
- Increase watchdog timeout of GAUDI QMAN arbitration H/W to prevent false
reports on timeouts
- Fix bug of dereferencing NULL pointer when an error occurs during command
submission
- Increase H/W timer for checking if PDMA engine is IDLE in GAUDI.
-----BEGIN PGP SIGNATURE-----
iQFKBAABCgA0FiEE7TEboABC71LctBLFZR1NuKta54AFAl7zIhoWHG9kZWQuZ2Fi
YmF5QGdtYWlsLmNvbQAKCRBlHU24q1rngGaMB/9M1ek2cdL/TwAX99AWfCcnvmQI
Z+HapPAI/XEhCA+p+YIArZ7tDu5dUzq+kFL+TB2LZc7kDZkub1dB3pw7HS4Z5GWA
cKdlns388iDfx5LteMOdZEtTmDolaDMhRAzm802W0TOP4Mn/t0H4/TmSYeZVmEov
4f1S3BHCF7JKbH7ZZkWu/IBfLzytlE4od5Ce/VV5q1C2X05O+8++mr2yJ0WZC+po
NJ5QtDdtrlvjZ1MFMCU+1NY3UIv6YiXtZdmiP92yjKRtOXsqv6U/+Dl6N9cdP3eb
TzHkYBDq6m9QJ5PyrQjX4xd+0oXaQEhJTNDJRUxArjsjsvtFhgLZcKDIP8fT
=RVKT
-----END PGP SIGNATURE-----
Merge tag 'misc-habanalabs-fixes-2020-06-24' of git://people.freedesktop.org/~gabbayo/linux into char-misc-linus
Oded writes:
This tag contains the following fixes for kernel 5.8-rc2:
- close security hole in GAUDI command buffer parsing by blocking an
instruction that might allow user to run command buffer that wasn't
parsed on a secured engine.
- Fix bug in GAUDI MMU cache invalidation code.
- Rename a function to resolve conflict with a static inline function in
arch/m68k/include/asm/mcfmmu.h
- Increase watchdog timeout of GAUDI QMAN arbitration H/W to prevent false
reports on timeouts
- Fix bug of dereferencing NULL pointer when an error occurs during command
submission
- Increase H/W timer for checking if PDMA engine is IDLE in GAUDI.
* tag 'misc-habanalabs-fixes-2020-06-24' of git://people.freedesktop.org/~gabbayo/linux:
habanalabs: increase h/w timer when checking idle
habanalabs: Correct handling when failing to enqueue CB
habanalabs: increase GAUDI QMAN ARB WDT timeout
habanalabs: rename mmu_write() to mmu_asid_va_write()
habanalabs: use PI in MMU cache invalidation
habanalabs: block scalar load_and_exe on external queue
A revert of Exynos5422 suspend clock support, it turns out it wasn't
ready to be merged. CDNS3 got a fix for test mode initialization.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
-----BEGIN PGP SIGNATURE-----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=rv5K
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v5.8-rc2
A revert of Exynos5422 suspend clock support, it turns out it wasn't
ready to be merged. CDNS3 got a fix for test mode initialization.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
* tag 'fixes-for-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"
usb: gadget: udc: Potential Oops in error handling code
usb: phy: tegra: Fix unnecessary check in tegra_usb_phy_probe()
usb: dwc3: pci: Fix reference count leak in dwc3_pci_resume_work
usb: cdns3: ep0: add spinlock for cdns3_check_new_setup
usb: cdns3: trace: using correct dir value
usb: cdns3: ep0: fix the test mode set incorrectly
* pm-cpufreq:
cpufreq: intel_pstate: Add one more OOB control bit
* pm-cpuidle:
cpuidle: Rearrange s2idle-specific idle state entry code
PM: s2idle: Clear _TIF_POLLING_NRFLAG before suspend to idle
Felipe has based his patches on that tag, so update my usb-linus branch
to it as well so that I can pull his patches in here easier.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At times when I'm using kgdb I see a splat on my console about
suspicious RCU usage. I managed to come up with a case that could
reproduce this that looked like this:
WARNING: suspicious RCU usage
5.7.0-rc4+ #609 Not tainted
-----------------------------
kernel/pid.c:395 find_task_by_pid_ns() needs rcu_read_lock() protection!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by swapper/0/1:
#0: ffffff81b6b8e988 (&dev->mutex){....}-{3:3}, at: __device_attach+0x40/0x13c
#1: ffffffd01109e9e8 (dbg_master_lock){....}-{2:2}, at: kgdb_cpu_enter+0x20c/0x7ac
#2: ffffffd01109ea90 (dbg_slave_lock){....}-{2:2}, at: kgdb_cpu_enter+0x3ec/0x7ac
stack backtrace:
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc4+ #609
Hardware name: Google Cheza (rev3+) (DT)
Call trace:
dump_backtrace+0x0/0x1b8
show_stack+0x1c/0x24
dump_stack+0xd4/0x134
lockdep_rcu_suspicious+0xf0/0x100
find_task_by_pid_ns+0x5c/0x80
getthread+0x8c/0xb0
gdb_serial_stub+0x9d4/0xd04
kgdb_cpu_enter+0x284/0x7ac
kgdb_handle_exception+0x174/0x20c
kgdb_brk_fn+0x24/0x30
call_break_hook+0x6c/0x7c
brk_handler+0x20/0x5c
do_debug_exception+0x1c8/0x22c
el1_sync_handler+0x3c/0xe4
el1_sync+0x7c/0x100
rpmh_rsc_probe+0x38/0x420
platform_drv_probe+0x94/0xb4
really_probe+0x134/0x300
driver_probe_device+0x68/0x100
__device_attach_driver+0x90/0xa8
bus_for_each_drv+0x84/0xcc
__device_attach+0xb4/0x13c
device_initial_probe+0x18/0x20
bus_probe_device+0x38/0x98
device_add+0x38c/0x420
If I understand properly we should just be able to blanket kgdb under
one big RCU read lock and the problem should go away. We'll add it to
the beast-of-a-function known as kgdb_cpu_enter().
With this I no longer get any splats and things seem to work fine.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200602154729.v2.1.I70e0d4fd46d5ed2aaf0c98a355e8e1b7a5bb7e4e@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
In kgdb context, calling console handlers aren't safe due to locks used
in those handlers which could in turn lead to a deadlock. Although, using
oops_in_progress increases the chance to bypass locks in most console
handlers but it might not be sufficient enough in case a console uses
more locks (VT/TTY is good example).
Currently when a driver provides both polling I/O and a console then kdb
will output using the console. We can increase robustness by using the
currently active polling I/O driver (which should be lockless) instead
of the corresponding console. For several common cases (e.g. an
embedded system with a single serial port that is used both for console
output and debugger I/O) this will result in no console handler being
used.
In order to achieve this we need to reverse the order of preference to
use dbg_io_ops (uses polling I/O mode) over console APIs. So we just
store "struct console" that represents debugger I/O in dbg_io_ops and
while emitting kdb messages, skip console that matches dbg_io_ops
console in order to avoid duplicate messages. After this change,
"is_console" param becomes redundant and hence removed.
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/1591264879-25920-5-git-send-email-sumit.garg@linaro.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
@subbuf is an output parameter of xdr_buf_subsegment(). A survey of
call sites shows that @subbuf is always uninitialized before
xdr_buf_segment() is invoked by callers.
There are some execution paths through xdr_buf_subsegment() that do
not set all of the fields in @subbuf, leaving some pointer fields
containing garbage addresses. Subsequent processing of that buffer
then results in a page fault.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Figuring out the root case for the REMOVE/CLOSE race and
suggesting the solution was done by Neil Brown.
Currently what happens is that direct IO calls hold a reference
on the open context which is decremented as an asynchronous task
in the nfs_direct_complete(). Before reference is decremented,
control is returned to the application which is free to close the
file. When close is being processed, it decrements its reference
on the open_context but since directIO still holds one, it doesn't
sent a close on the wire. It returns control to the application
which is free to do other operations. For instance, it can delete a
file. Direct IO is finally releasing its reference and triggering
an asynchronous close. Which races with the REMOVE. On the server,
REMOVE can be processed before the CLOSE, failing the REMOVE with
EACCES as the file is still opened.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Suggested-by: Neil Brown <neilb@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the mirror count changes in the new layout we pick up inside
ff_layout_pg_init_write(), then we can end up adding the
request to the wrong mirror and corrupting the mirror->pg_list.
Fixes: d600ad1f2b ("NFS41: pop some layoutget errors to application")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The try_location function is called within a loop by nfs_follow_referral.
try_location calls nfs4_pathname_string to created the export_path.
nfs4_pathname_string allocates the memory. export_path is stored in the
nfs_fs_context/fs_context structure similarly as hostname and source.
But whereas the ctx hostname and source are freed before assignment,
export_path is not. So if there are multiple loops, the new export_path
will overwrite the old without the old being freed.
So call kfree for export_path.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
__rpc_depopulate(gssd_dentry) was lost on error path
cc: stable@vger.kernel.org
Fixes: commit 4b9a445e3e ("sunrpc: create a new dummy pipe for gssd to hold open")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the i2c bus driver ignores the I2C_M_RECV_LEN flag (as some of
them do), it is possible for an I2C_SMBUS_BLOCK_DATA read issued
on some random device to return an arbitrary value in the first
byte (and nothing else). When this happens, i2c_smbus_xfer_emulated()
will happily write past the end of the supplied data buffer, thus
causing Bad Things to happen. To prevent this, check the size
before copying the data block and return an error if it is too large.
Fixes: 209d27c3b1 ("i2c: Emulate SMBus block read over I2C")
Signed-off-by: Mans Rullgard <mans@mansr.com>
[wsa: use better errno]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
