Commit Graph

8171 Commits

Author SHA1 Message Date
Kiran Gunda
8663c188be backlight: qcom-wled: Add auto string detection logic
The auto string detection algorithm checks if the current WLED
sink configuration is valid. It tries enabling every sink and
checks if the OVP fault is observed. Based on this information
it detects and enables the valid sink configuration.
Auto calibration will be triggered when the OVP fault interrupts
are seen frequently thereby it tries to fix the sink configuration.

The auto-detection also kicks in when the connected LED string
of the display-backlight malfunctions (because of damage) and
requires the damaged string to be turned off to prevent the
complete panel and/or board from being damaged.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01 08:11:39 +00:00
Kiran Gunda
feeab87b30 backlight: qcom-wled: Add support for short circuit handling
Handle the short circuit interrupt and check if the short circuit
interrupt is valid. Re-enable the module to check if it goes
away. Disable the module altogether if the short circuit event
persists.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01 08:11:39 +00:00
Kiran Gunda
03b2b5e869 backlight: qcom-wled: Add support for WLED4 peripheral
WLED4 peripheral is present on some PMICs like pmi8998 and
pm660l. It has a different register map and configurations
are also different. Add support for it.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01 08:11:50 +00:00
Kiran Gunda
775d2ffb4a backlight: qcom-wled: Restructure the driver for WLED3
Restructure the driver to add the support for new WLED
peripherals.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01 08:11:47 +00:00
Kiran Gunda
bb800a3715 backlight: qcom-wled: Rename PM8941* to WLED3
Rename the PM8941* references as WLED3 to make the driver
generic and have WLED support for other PMICs. Also rename
"i_boost_limit" and "i_limit" variables to "boost_i_limit"
and "string_i_limit" respectively to resemble the corresponding
register names.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01 08:11:39 +00:00
Kiran Gunda
51c0ddc758 backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
pm8941-wled.c driver is supporting the WLED peripheral
on pm8941. Rename it to qcom-wled.c so that it can support
WLED on multiple PMICs.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01 08:03:29 +00:00
Thomas Gleixner
53e4929150 backlight: Kconfig: jornada720: Use CONFIG_PREEMPTION
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.

Switch the Kconfig dependency to CONFIG_PREEMPTION.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[Sebastian: +LCD_HP700]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-18 08:38:48 +01:00
Rasmus Villemoes
ca58b37034 backlight: pwm_bl: Switch to power-of-2 base for fixed-point math
Using a power-of-2 instead of power-of-10 base makes the computations
much cheaper. 2^16 is safe; retval never becomes more than 2^48 +
2^32/2. On a 32 bit platform, the very expensive 64/32 division at the
end of cie1931() instead becomes essentially free (a shift by 32 is
just a register rename).

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14 08:57:45 +01:00
Rasmus Villemoes
407feae1ca backlight: pwm_bl: Drop use of int_pow()
For a fixed small exponent of 3, it is more efficient to simply use
two explicit multiplications rather than calling the int_pow() library
function: Aside from the function call overhead, its implementation
using repeated squaring means it ends up doing four 64x64
multiplications.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14 08:57:45 +01:00
Rasmus Villemoes
e802cbafcb backlight: pwm_bl: Eliminate a 64/32 division
lightness*1000 is nowhere near overflowing 32 bits, so we can just use
an ordinary 32/32 division, which is much cheaper than the 64/32 done
via do_div().

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14 08:57:45 +01:00
Rasmus Villemoes
efdf690e15 backlight: pwm_bl: Fix cie1913 comments and constant
The "break-even" point for the two formulas is L==8, which is also
what the code actually implements. [Incidentally, at that point one
has Y=0.008856, not 0.08856].

Moreover, all the sources I can find say the linear factor is 903.3
rather than 902.3, which makes sense since then the formulas agree at
L==8, both yielding the 0.008856 figure to four significant digits.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14 08:57:45 +01:00
Matthias Kaehlcke
349ee12287 backlight: pwm_bl: Add missing curly branches in else branch
Add curly braces to an 'else' branch in pwm_backlight_update_status()
to match the corresponding 'if' branch.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14 08:57:45 +01:00
Matthias Kaehlcke
de6f2a7fa2 backlight: pwm_bl: Don't assign levels table repeatedly
pwm_backlight_probe() re-assigns pb->levels for every brightness
level. This is not needed and was likely not intended, since
neither side of the assignment changes during the loop. Assign
the field only once.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14 08:57:45 +01:00
Andreas Kemnade
0e0e78e32e backlight: lm3630a: Add an enable gpio for the HWEN pin
For now just enable it in the probe function to allow I2C
access. Disabling also means resetting the register values
to default and according to the datasheet does not give
power savings.

Tested on Kobo Clara HD.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-02 14:25:27 +01:00
Nishka Dasgupta
7050a7c374 backlight: ipaq_micro: Make structure micro_bl_props constant
Static structure micro_bl_props, having type backlight_properties, is
used only once, when it is passed as the last argument to function
devm_backlight_device_register(). devm_backlight_device_register() is
defined with its last parameter being declared constant. Hence make
micro_bl_props itself constant as well.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-02 14:19:00 +01:00
Andreas Kemnade
8ad003e734 backlight: lm3630a: Fix module aliases
Devicetree aliases are missing, so that module autoloading
does not work properly.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-02 14:12:15 +01:00
Linus Torvalds
d0b3cfee33 - Core Frameworks
- Obtain scale type through sysfs
 
  - New Functionality
    - Provide Device Tree functionality; rave-sp-backlight
    - Calculate if scale type is (non-)linear; pwm_bl
 
  - Fix-ups
    - Simplify code; lm3630a_bl
    - Trivial rename/whitespace/typo fixes; lms283gf05
    - Remove superfluous NULL check; tosa_lcd
    - Fix power state initialisation; gpio_backlight
    - List supported file; MAINTAINERS
 
  - Bug Fixes
    - Kconfig - default to not building unless requested; {LED,BACKLIGHT}_CLASS_DEVICE
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl2JTwMACgkQUa+KL4f8
 d2EC7g/+Pliuvx8dgW+MPX8K6cnap+m7xV8Z9OyyEYHroz+MX7TsBGmJeChoOz9K
 RoFCap5VCtEEyiobDbe8HKpxivY88CdweegYxxBx+Uo9qJRogDv93kqVz3BmHxBm
 v2ShTY+8r2nf6YNN30FXZJSM4WkFqAg2MvM6LXP3R4rPSQ/u2Xp6L5VnzVETl23b
 /ZsP71axvwDNpi437ekUSoraUl9GZnHaINc7/0R/SnRPvZ2aakko7IRNYU0z+NQ+
 unImiBpFjuC1UXDaebd2Bt9ayrM47QkBGLu6LgOTUSg9tFlosvF6Z3TDLo3L2ptD
 Td5SWuTXALFaOv1xmMaylcsA/36D/KRhwnmQMVn/Ld5c/M+l4vOm4YDNgS1G8JY4
 i7KzoD7Z2yhyI3OHYoBGXI8+fmj2qQs+VGThtdhb96LlaHVUibfSlA0i5OjeMKO+
 ddiTy9ksiH+pBcn0YPvHJRNOI0uVmqBMSPkJ1Bdwz6HS58QcL3LvBzHtMVNoGkCK
 iWPPn90hveZmbXAxFIb8a2KRjFz531sReSZh+9dIZ/zOOF5OdyOotMk1zacWCUrt
 Jre1paR4W1VPXf4cE3IcpE6dJeA9DN9niz+9bsMgbr6cYG6xhB7xELrTUCXZn5CR
 C9tNMWuiqUlv0NZHb7CsifQW1bwzw8hTPhDk9VpBb0cFCucLYV0=
 =DSnC
 -----END PGP SIGNATURE-----

Merge tag 'backlight-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
 "Core Frameworks
   - Obtain scale type through sysfs

  New Functionality:
   - Provide Device Tree functionality in rave-sp-backlight
   - Calculate if scale type is (non-)linear in pwm_bl

  Fix-ups:
   - Simplify code in lm3630a_bl
   - Trivial rename/whitespace/typo fixes in lms283gf05
   - Remove superfluous NULL check in tosa_lcd
   - Fix power state initialisation in gpio_backlight
   - List supported file in MAINTAINERS

  Bug Fixes:
   - Kconfig - default to not building unless requested in
     {LED,BACKLIGHT}_CLASS_DEVICE"

* tag 'backlight-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm_bl: Set scale type for brightness curves specified in the DT
  backlight: pwm_bl: Set scale type for CIE 1931 curves
  backlight: Expose brightness curve type through sysfs
  MAINTAINERS: Add entry for stable backlight sysfs ABI documentation
  backlight: gpio-backlight: Correct initial power state handling
  video: backlight: tosa_lcd: drop check because i2c_unregister_device() is NULL safe
  video: backlight: Drop default m for {LCD,BACKLIGHT_CLASS_DEVICE}
  backlight: lms283gf05: Fix a typo in the description passed to 'devm_gpio_request_one()'
  backlight: lm3630a: Switch to use fwnode_property_count_uXX()
  backlight: rave-sp: Leave initial state and register with correct device
2019-09-23 19:33:56 -07:00
Linus Torvalds
5c6bd5de3c Main MIPS changes for v5.4:
- boot_mem_map is removed, providing a nice cleanup made possible by the
   recent removal of bootmem.
 
 - Some fixes to atomics, in general providing compiler barriers for
   smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or
   MIPS32 systems using cmpxchg64().
 
 - Conversion to the new generic VDSO infrastructure courtesy of Vincenzo
   Frascino.
 
 - Removal of undefined behavior in set_io_port_base(), fixing the
   behavior of some MIPS kernel configurations when built with recent
   clang versions.
 
 - Initial MIPS32 huge page support, functional on at least Ingenic SoCs.
 
 - pte_special() is now supported for some configurations, allowing among
   other things generic fast GUP to be used.
 
 - Miscellaneous fixes & cleanups.
 
 And platform specific changes:
 
 - Major improvements to Ingenic SoC support from Paul Cercueil, mostly
   enabled by the inclusion of the new TCU (timer-counter unit) drivers
   he's spent a very patient year or so working on. Plus some fixes for
   X1000 SoCs from Zhou Yanjie.
 
 - Netgear R6200 v1 systems are now supported by the bcm47xx platform.
 
 - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems.
 -----BEGIN PGP SIGNATURE-----
 
 iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXYaqpRUccGF1bC5idXJ0
 b25AbWlwcy5jb20ACgkQPqefrLV1AN2JUQD+PQGFIlq9bo/3vLyqsXJffm+DhwVQ
 4WSCSeN5brPkO8EA/153sRJBlRtG+KK5p9f7WYKUuBfbcEawuc1uwmKuy7cG
 =lWlM
 -----END PGP SIGNATURE-----

Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:
 "Main MIPS changes:

   - boot_mem_map is removed, providing a nice cleanup made possible by
     the recent removal of bootmem.

   - Some fixes to atomics, in general providing compiler barriers for
     smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs
     or MIPS32 systems using cmpxchg64().

   - Conversion to the new generic VDSO infrastructure courtesy of
     Vincenzo Frascino.

   - Removal of undefined behavior in set_io_port_base(), fixing the
     behavior of some MIPS kernel configurations when built with recent
     clang versions.

   - Initial MIPS32 huge page support, functional on at least Ingenic
     SoCs.

   - pte_special() is now supported for some configurations, allowing
     among other things generic fast GUP to be used.

   - Miscellaneous fixes & cleanups.

  And platform specific changes:

   - Major improvements to Ingenic SoC support from Paul Cercueil,
     mostly enabled by the inclusion of the new TCU (timer-counter unit)
     drivers he's spent a very patient year or so working on. Plus some
     fixes for X1000 SoCs from Zhou Yanjie.

   - Netgear R6200 v1 systems are now supported by the bcm47xx platform.

   - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems"

* tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits)
  MIPS: Detect bad _PFN_SHIFT values
  MIPS: Disable pte_special() for MIPS32 with RiXi
  MIPS: ralink: deactivate PCI support for SOC_MT7621
  mips: compat: vdso: Use legacy syscalls as fallback
  MIPS: Drop Loongson _CACHE_* definitions
  MIPS: tlbex: Remove cpu_has_local_ebase
  MIPS: tlbex: Simplify r3k check
  MIPS: Select R3k-style TLB in Kconfig
  MIPS: PCI: refactor ioc3 special handling
  mips: remove ioremap_cachable
  mips/atomic: Fix smp_mb__{before,after}_atomic()
  mips/atomic: Fix loongson_llsc_mb() wreckage
  mips/atomic: Fix cmpxchg64 barriers
  MIPS: Octeon: remove duplicated include from dma-octeon.c
  firmware: bcm47xx_nvram: Allow COMPILE_TEST
  firmware: bcm47xx_nvram: Correct size_t printf format
  MIPS: Treat Loongson Extensions as ASEs
  MIPS: Remove dev_err() usage after platform_get_irq()
  MIPS: dts: mscc: describe the PTP ready interrupt
  MIPS: dts: mscc: describe the PTP register range
  ...
2019-09-22 09:30:30 -07:00
Linus Torvalds
574cc45397 drm main pull for 5.4-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJdgfi4AAoJEAx081l5xIa+uYQP/3lbB75F60oSb0Y17uOtAwrS
 /ZMKZ3/EXcCw42JuYTbz17EiQSajkJcOC+tNRo22nlg4d9R0x3/kXwA7O/eu5RWI
 8Qi1rfrMZ6LotQXBfc4nVlHvyocsYc/GVNfsCboUCLwU/aNwnrufS9jeEsvWd2Vt
 iIn/okeQ7mTyB/3Dm4RFIAexE21+d5is6YTs45xUnDLhWzXYLU7VnHt5S5kXurEI
 cmVA7C1EAqV+GAwkeFWFx/jBpBRKqvTPa8EpOu7cQL01x7KwU2cQeNdOyBF6Uf8a
 cNKFI7jZZmu/mFp+YqU33ZIZxbLELm5PN1sz4ZvoIT8BJAQf1VmZg+GG87AvQCUz
 zbWKrbHGVy/c+sohUmvCOQvmzca/7rZutFyaCOx2mEdrheRZMWQI/w2C03VfkNFS
 vPpXrKXaWbVezHwF6x9PemRxvOPvLkeKAgSVuAfK0DhT5kEldqdzFzI7UO9MYfyX
 j+HOUIRP/pseshUV6YbnAe9MS3T4zb5P+Qd1zRTGgo8R9/l1AmVHyrkbH1hGNjY0
 mECHucCOh/VsyPAdg1XADJHqMg9081prySK8hNV6oazwSHdC38GdajuOmdyO3azQ
 OpJZDQd0eP4fHPMU6F5HSzLOO/wYuAie8gWVSZ3ylDxDPIKfqcjVo+4bxJ8sbmpI
 akj6BoMX7we0fjhlbdit
 =5CRH
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This is the main pull request for 5.4-rc1 merge window. I don't think
  there is anything outstanding so next week should just be fixes, but
  we'll see if I missed anything. I landed some fixes earlier in the
  week but got delayed writing summary and sending it out, due to a mix
  of sick kid and jetlag!

  There are some fixes pending, but I'd rather get the main merge out of
  the way instead of delaying it longer.

  It's also pretty large in commit count and new amd header file size.
  The largest thing is four new amdgpu products (navi12/14, arcturus and
  renoir APU support).

  Otherwise it's pretty much lots of work across the board, i915 has
  started landing tigerlake support, lots of icelake fixes and lots of
  locking reworking for future gpu support, lots of header file rework
  (drmP.h is nearly gone), some old legacy hacks (DRM_WAIT_ON) have been
  put into the places they are needed.

  uapi:
   - content protection type property for HDCP

  core:
   - rework include dependencies
   - lots of drmP.h removals
   - link rate calculation robustness fix
   - make fb helper map only when required
   - add connector->DDC adapter link
   - DRM_WAIT_ON removed
   - drop DRM_AUTH usage from drivers

  dma-buf:
   - reservation object fence helper

  dma-fence:
   - shrink dma_fence struct
   - merge signal functions
   - store timestamps in dma_fence
   - selftests

  ttm:
   - embed drm_get_object struct into ttm_buffer_object
   - release_notify callback

  bridges:
   - sii902x - audio graph card support
   - tc358767 - aux data handling rework
   - ti-snd64dsi86 - debugfs support, DSI mode flags support

  panels:
   - Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
     COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe
     Himax8279d, Sharp LD-D5116Z01B
   - TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01,
     Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1

  i915:
   - Initial tigerlake platform support
   - Locking simplification work, general all over refactoring.
   - Selftests
   - HDCP debug info improvements
   - DSI properties
   - Icelake display PLL fixes, colorspace fixes, bandwidth fixes, DSI
     suspend/resume
   - GuC fixes
   - Perf fixes
   - ElkhartLake enablement
   - DP MST fixes
   - GVT - command parser enhancements

  amdgpu:
   - add wipe memory on release flag for buffer creation
   - Navi12/14 support (may be marked experimental)
   - Arcturus support
   - Renoir APU support
   - mclk DPM for Navi
   - DC display fixes
   - Raven scatter/gather support
   - RAS support for GFX
   - Navi12 + Arcturus power features
   - GPU reset for Picasso
   - smu11 i2c controller support

  amdkfd:
   - navi12/14 support
   - Arcturus support

  radeon:
   - kexec fix

  nouveau:
   - improved display color management
   - detect lack of GPU power cables

  vmwgfx:
   - evicition priority support
   - remove unused security feature

  msm:
   - msm8998 display support
   - better async commit support for cursor updates

  etnaviv:
   - per-process address space support
   - performance counter fixes
   - softpin support

  mcde:
   - DCS transfers fix

  exynos:
   - drmP.h cleanup

  lima:
   - reduce logging

  kirin:
   - misc clenaups

  komeda:
   - dual-link support
   - DT memory regions

  hisilicon:
   - misc fixes

  imx:
   - IPUv3 image converter fixes
   - 32-bit RGB V4L2 pixel format support

  ingenic:
   - more support for panel related cases

  mgag200:
   - cursor support fix

  panfrost:
   - export GPU features register to userspace
   - gpu heap allocations
   - per-fd address space support

  pl111:
   - CLD pads wiring support removed from DT

  rockchip:
   - rework to use DRM PSR helpers
   - fix bug in VOP_WIN_GET macro
   - DSI DT binding rework

  sun4i:
   - improve support for color encoding and range
   - DDC enabled GPIO

  tinydrm:
   - rework SPI support
   - improve MIPI-DBI support
   - moved to drm/tiny

  vkms:
   - rework CRC tracking

  dw-hdmi:
   - get_eld and i2s improvements

  gm12u320:
   - misc fixes

  meson:
   - global code cleanup
   - vpu feature detect

  omap:
   - alpha/pixel blend mode properties

  rcar-du:
   - misc fixes"

* tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm: (2112 commits)
  drm/nouveau/bar/gm20b: Avoid BAR1 teardown during init
  drm/nouveau: Fix ordering between TTM and GEM release
  drm/nouveau/prime: Extend DMA reservation object lock
  drm/nouveau: Fix fallout from reservation object rework
  drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors
  drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap
  drm/i915: to make vgpu ppgtt notificaiton as atomic operation
  drm/i915: Flush the existing fence before GGTT read/write
  drm/i915: Hold irq-off for the entire fake lock period
  drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915
  drm/i915/gvt: update vgpu workload head pointer correctly
  drm/mcde: Fix DSI transfers
  drm/msm: Use the correct dma_sync calls harder
  drm/msm: remove unlikely() from WARN_ON() conditions
  drm/msm/dsi: Fix return value check for clk_get_parent
  drm/msm: add atomic traces
  drm/msm/dpu: async commit support
  drm/msm: async commit support
  drm/msm: split power control from prepare/complete_commit
  drm/msm: add kms->flush_commit()
  ...
2019-09-19 16:24:24 -07:00
Linus Torvalds
1f7d290a72 Driver core patches for 5.4-rc1
Here is the big driver core update for 5.4-rc1.
 
 There was a bit of a churn in here, with a number of core and OF
 platform patches being added to the tree, and then after much discussion
 and review and a day-long in-person meeting, they were decided to be
 reverted and a new set of patches is currently being reviewed on the
 mailing list.
 
 Other than that churn, there are two "persistent" branches in here that
 other trees will be pulling in as well during the merge window.  One
 branch to add support for drivers to have the driver core automatically
 add sysfs attribute files when a driver is bound to a device so that the
 driver doesn't have to manually do it (and then clean it up, as it
 always gets it wrong).
 
 There's another branch in here for generic lookup helpers for the driver
 core that lots of busses are starting to use.  That's the majority of
 the non-driver-core changes in this patch series.
 
 There's also some on-going debugfs file creation cleanup that has been
 slowly happening over the past few releases, with the goal to hopefully
 get that done sometime next year.
 
 All of these have been in linux-next for a while now with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXYIVHA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymEVwCfRPxQHQplI6ZR6h0jPscLSaZnaFIAn1a+rjO2
 EFuuXJ5Ip72F5Ch9AW3G
 =r8lH
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg Kroah-Hartman:
 "Here is the big driver core update for 5.4-rc1.

  There was a bit of a churn in here, with a number of core and OF
  platform patches being added to the tree, and then after much
  discussion and review and a day-long in-person meeting, they were
  decided to be reverted and a new set of patches is currently being
  reviewed on the mailing list.

  Other than that churn, there are two "persistent" branches in here
  that other trees will be pulling in as well during the merge window.
  One branch to add support for drivers to have the driver core
  automatically add sysfs attribute files when a driver is bound to a
  device so that the driver doesn't have to manually do it (and then
  clean it up, as it always gets it wrong).

  There's another branch in here for generic lookup helpers for the
  driver core that lots of busses are starting to use. That's the
  majority of the non-driver-core changes in this patch series.

  There's also some on-going debugfs file creation cleanup that has been
  slowly happening over the past few releases, with the goal to
  hopefully get that done sometime next year.

  All of these have been in linux-next for a while now with no reported
  issues"

[ Note that the above-mentioned generic lookup helpers branch was
  already brought in by the LED merge (commit 4feaab05dc) that had
  shared it.

  Also note that that common branch introduced an i2c bug due to a bad
  conversion, which got fixed here. - Linus ]

* tag 'driver-core-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (49 commits)
  coccinelle: platform_get_irq: Fix parse error
  driver-core: add include guard to linux/container.h
  sysfs: add BIN_ATTR_WO() macro
  driver core: platform: Export platform_get_irq_optional()
  hwmon: pwm-fan: Use platform_get_irq_optional()
  driver core: platform: Introduce platform_get_irq_optional()
  Revert "driver core: Add support for linking devices during device addition"
  Revert "driver core: Add edit_links() callback for drivers"
  Revert "of/platform: Add functional dependency link from DT bindings"
  Revert "driver core: Add sync_state driver/bus callback"
  Revert "of/platform: Pause/resume sync state during init and of_platform_populate()"
  Revert "of/platform: Create device links for all child-supplier depencencies"
  Revert "of/platform: Don't create device links for default busses"
  Revert "of/platform: Fix fn definitons for of_link_is_valid() and of_link_property()"
  Revert "of/platform: Fix device_links_supplier_sync_state_resume() warning"
  Revert "of/platform: Disable generic device linking code for PowerPC"
  devcoredump: fix typo in comment
  devcoredump: use memory_read_from_buffer
  of/platform: Disable generic device linking code for PowerPC
  device.h: Fix warnings for mismatched parameter names in comments
  ...
2019-09-18 10:04:39 -07:00
Linus Torvalds
77dcfe2b9e Power management updates for 5.4-rc1
- Rework the main suspend-to-idle control flow to avoid repeating
    "noirq" device resume and suspend operations in case of spurious
    wakeups from the ACPI EC and decouple the ACPI EC wakeups support
    from the LPS0 _DSM support (Rafael Wysocki).
 
  - Extend the wakeup sources framework to expose wakeup sources as
    device objects in sysfs (Tri Vo, Stephen Boyd).
 
  - Expose system suspend statistics in sysfs (Kalesh Singh).
 
  - Introduce a new haltpoll cpuidle driver and a new matching
    governor for virtualized guests wanting to do guest-side polling
    in the idle loop (Marcelo Tosatti, Joao Martins, Wanpeng Li,
    Stephen Rothwell).
 
  - Fix the menu and teo cpuidle governors to allow the scheduler tick
    to be stopped if PM QoS is used to limit the CPU idle state exit
    latency in some cases (Rafael Wysocki).
 
  - Increase the resolution of the play_idle() argument to microseconds
    for more fine-grained injection of CPU idle cycles (Daniel Lezcano).
 
  - Switch over some users of cpuidle notifiers to the new QoS-based
    frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
    policy notifier events (Viresh Kumar).
 
  - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).
 
  - Add support for MT8183 and MT8516 to the mediatek cpufreq driver
    (Andrew-sh.Cheng, Fabien Parent).
 
  - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
    Huang).
 
  - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).
 
  - Update the qcom cpufreq driver (among other things, to make it
    easier to extend and to use kryo cpufreq for other nvmem-based
    SoCs) and add qcs404 support to it  (Niklas Cassel, Douglas
    RAILLARD, Sibi Sankar, Sricharan R).
 
  - Fix assorted issues and make assorted minor improvements in the
    cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
    Gustavo Silva, Hariprasad Kelam).
 
  - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
    Bergmann).
 
  - Add new Exynos PPMU events to devfreq events and extend that
    mechanism (Lukasz Luba).
 
  - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).
 
  - Improve devfreq documentation and governor code, fix spelling
    typos in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard
    Crestez, MyungJoo Ham, Gaël PORTAY).
 
  - Add regulators enable and disable to the OPP (operating performance
    points) framework (Kamil Konieczny).
 
  - Update the OPP framework to support multiple opp-suspend properties
    (Anson Huang).
 
  - Fix assorted issues and make assorted minor improvements in the OPP
    code (Niklas Cassel, Viresh Kumar, Yue Hu).
 
  - Clean up the generic power domains (genpd) framework (Ulf Hansson).
 
  - Clean up assorted pieces of power management code and documentation
    (Akinobu Mita, Amit Kucheria, Chuhong Yuan).
 
  - Update the pm-graph tool to version 5.5 including multiple fixes
    and improvements (Todd Brandt).
 
  - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
    Sébastien Szymanski).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl2ArZ4SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxgfYQAK80hs43vWQDmp7XKrN4pQe8+qYULAGO
 fBfrFl+NG9y/cnuqnt3NtA8MoyNsMMkMLkpkEDMfSbYqqH5ehEzX5+uGJWiWx8+Y
 oH5KU8MH7Tj/utYaalGzDt0AHfHZDIGC0NCUNQJVtE/4mOANFabwsCwscp4MrD5Q
 WjFN8U4BrsmWgJdZ/U9QIWcDZ0I+1etCF+rZG2yxSv31FMq2Zk/Qm4YyobqCvQFl
 TR9rxl08wqUmIYIz5cDjt/3AKH7NLLDqOTstbCL7cmufM5XPFc1yox69xc89UrIa
 4AMgmDp7SMwFG/gdUPof0WQNmx7qxmiRAPleAOYBOZW/8jPNZk2y+RhM5NeF72m7
 AFqYiuxqatkSb4IsT8fLzH9IUZOdYr8uSmoMQECw+MHdApaKFjFV8Lb/qx5+AwkD
 y7pwys8dZSamAjAf62eUzJDWcEwkNrujIisGrIXrVHb7ISbweskMOmdAYn9p4KgP
 dfRzpJBJ45IaMIdbaVXNpg3rP7Apfs7X1X+/ZhG6f+zHH3zYwr8Y81WPqX8WaZJ4
 qoVCyxiVWzMYjY2/1lzjaAdqWojPWHQ3or3eBaK52DouyG3jY6hCDTLwU7iuqcCX
 jzAtrnqrNIKufvaObEmqcmYlIIOFT7QaJCtGUSRFQLfSon8fsVSR7LLeXoAMUJKT
 JWQenuNaJngK
 =TBDQ
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These include a rework of the main suspend-to-idle code flow (related
  to the handling of spurious wakeups), a switch over of several users
  of cpufreq notifiers to QoS-based limits, a new devfreq driver for
  Tegra20, a new cpuidle driver and governor for virtualized guests, an
  extension of the wakeup sources framework to expose wakeup sources as
  device objects in sysfs, and more.

  Specifics:

   - Rework the main suspend-to-idle control flow to avoid repeating
     "noirq" device resume and suspend operations in case of spurious
     wakeups from the ACPI EC and decouple the ACPI EC wakeups support
     from the LPS0 _DSM support (Rafael Wysocki).

   - Extend the wakeup sources framework to expose wakeup sources as
     device objects in sysfs (Tri Vo, Stephen Boyd).

   - Expose system suspend statistics in sysfs (Kalesh Singh).

   - Introduce a new haltpoll cpuidle driver and a new matching governor
     for virtualized guests wanting to do guest-side polling in the idle
     loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell).

   - Fix the menu and teo cpuidle governors to allow the scheduler tick
     to be stopped if PM QoS is used to limit the CPU idle state exit
     latency in some cases (Rafael Wysocki).

   - Increase the resolution of the play_idle() argument to microseconds
     for more fine-grained injection of CPU idle cycles (Daniel
     Lezcano).

   - Switch over some users of cpuidle notifiers to the new QoS-based
     frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
     policy notifier events (Viresh Kumar).

   - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).

   - Add support for MT8183 and MT8516 to the mediatek cpufreq driver
     (Andrew-sh.Cheng, Fabien Parent).

   - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
     Huang).

   - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).

   - Update the qcom cpufreq driver (among other things, to make it
     easier to extend and to use kryo cpufreq for other nvmem-based
     SoCs) and add qcs404 support to it (Niklas Cassel, Douglas
     RAILLARD, Sibi Sankar, Sricharan R).

   - Fix assorted issues and make assorted minor improvements in the
     cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
     Gustavo Silva, Hariprasad Kelam).

   - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
     Bergmann).

   - Add new Exynos PPMU events to devfreq events and extend that
     mechanism (Lukasz Luba).

   - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).

   - Improve devfreq documentation and governor code, fix spelling typos
     in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez,
     MyungJoo Ham, Gaël PORTAY).

   - Add regulators enable and disable to the OPP (operating performance
     points) framework (Kamil Konieczny).

   - Update the OPP framework to support multiple opp-suspend properties
     (Anson Huang).

   - Fix assorted issues and make assorted minor improvements in the OPP
     code (Niklas Cassel, Viresh Kumar, Yue Hu).

   - Clean up the generic power domains (genpd) framework (Ulf Hansson).

   - Clean up assorted pieces of power management code and documentation
     (Akinobu Mita, Amit Kucheria, Chuhong Yuan).

   - Update the pm-graph tool to version 5.5 including multiple fixes
     and improvements (Todd Brandt).

   - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
     Sébastien Szymanski)"

* tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits)
  cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available
  cpuidle-haltpoll: do not set an owner to allow modunload
  cpuidle-haltpoll: return -ENODEV on modinit failure
  cpuidle-haltpoll: set haltpoll as preferred governor
  cpuidle: allow governor switch on cpuidle_register_driver()
  PM: runtime: Documentation: add runtime_status ABI document
  pm-graph: make setVal unbuffered again for python2 and python3
  powercap: idle_inject: Use higher resolution for idle injection
  cpuidle: play_idle: Increase the resolution to usec
  cpuidle-haltpoll: vcpu hotplug support
  cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
  cpufreq: qcom: Add support for qcs404 on nvmem driver
  cpufreq: qcom: Refactor the driver to make it easier to extend
  cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
  dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
  Documentation: cpufreq: Update policy notifier documentation
  cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
  PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
  PM / Domains: Simplify genpd_lookup_dev()
  ...
2019-09-17 19:15:14 -07:00
Rafael J. Wysocki
ca61a72ac3 Merge branch 'pm-cpufreq'
* pm-cpufreq: (36 commits)
  cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
  cpufreq: qcom: Add support for qcs404 on nvmem driver
  cpufreq: qcom: Refactor the driver to make it easier to extend
  cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
  dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
  Documentation: cpufreq: Update policy notifier documentation
  cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
  sched/cpufreq: Align trace event behavior of fast switching
  ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier
  video: pxafb: Remove cpufreq policy notifier
  video: sa1100fb: Remove cpufreq policy notifier
  arch_topology: Use CPUFREQ_CREATE_POLICY instead of CPUFREQ_NOTIFY
  cpufreq: powerpc_cbe: Switch to QoS requests for freq limits
  cpufreq: powerpc: macintosh: Switch to QoS requests for freq limits
  cpufreq: Print driver name if cpufreq_suspend() fails
  cpufreq: mediatek: Add support for mt8183
  cpufreq: mediatek: change to regulator_get_optional
  cpufreq: imx-cpufreq-dt: Add i.MX8MN support
  cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading
  ...
2019-09-17 09:44:29 +02:00
Linus Torvalds
399eb9b6cb ARM: SoC driver updates for v5.4
The branch contains driver changes that are tightly
 connected to SoC specific code. Aside from smaller
 cleanups and bug fixes, here is a list of the notable
 changes.
 
 New device drivers:
 
 - The Turris Mox router has a new "moxtet" bus driver
   for its on-board pluggable extension bus. The
   same platform also gains a firmware driver.
 
 - The Samsung Exynos family gains a new Chipid driver
   exporting using the soc device sysfs interface
 
 - A similar socinfo driver for Qualcomm Snapdragon
   chips.
 
 - A firmware driver for the NXP i.MX DSP IPC protocol
   using shared memory and a mailbox
 
 Other changes:
 
 - The i.MX reset controller driver now supports the
   NXP i.MX8MM chip
 
 - Amlogic SoC specific drivers gain support for
   the S905X3 and A311D chips
 
 - A rework of the TI Davinci framebuffer driver to
   allow important cleanups in the platform code
 
 - A couple of device drivers for removed ARM SoC
   platforms are removed. Most of the removals were
   picked up by other maintainers, this contains
   whatever was left.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdf6SUAAoJEJpsee/mABjZAfwP/01bXBOlGVusNH2zuh8IUSHb
 //5sTdWpwa2ugRekLOJUOjo2p9Fu70yH6xr4RUHI0rcRjZA0xR3bZPx45gI8LRHQ
 tfb25LaKqfgZjWMCJ8due1Lh7B6ffOQukryMtM/LoiCtqsy7b6aThEKaLpM9/Owl
 t53o4wKaVQJK5He9JQom9NOZidkl7tYLHmDQTOXhX2UEA/i45vtfjdsEBvoFPbTx
 +bYvlqs+SWlpDJk29j+oBOeKadPF+TFboLDiUCxH44MC3OsH51zjtKVBRTtbNMkb
 ek/ci5x9hCeHcYSEigNq2EMzEln09Yxyvjk8U/jLiJ1h1kz3p5MjqJbVMF1rYXpe
 ALuAwinM8Zv2o5/UOCkiQTWq79PtpOKHZKpNBXkaJ8kyqBLMSy8Fs3hCvXrDnjnQ
 TC8jX7UBqHRV2rbQIYehAQAxTvcRgTbqusQGLkUJInlux6go57LoMYHPABpHftJV
 kRdVeT0KzdCz1pvQwyekIog5hPLNTBi4jw6eQcOgeENvAea1MJa8lMMfKcVbIdS0
 ZVvxLl+K6noEKAv5lSeHAzjXq+cQFr3zDCsWy351mJETDHmE8zjsaHN1SgbRYLEk
 ZqzNwUYaPYBis38g85qaY/TSsJrWJ+jP8u7s9HTw3Oywg8SRy5vtW177s00/9VOd
 PYZ2UpqUeX8cdvggqUUU
 =lxFi
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "This contains driver changes that are tightly connected to SoC
  specific code. Aside from smaller cleanups and bug fixes, here is a
  list of the notable changes.

  New device drivers:

   - The Turris Mox router has a new "moxtet" bus driver for its
     on-board pluggable extension bus. The same platform also gains a
     firmware driver.

   - The Samsung Exynos family gains a new Chipid driver exporting using
     the soc device sysfs interface

   - A similar socinfo driver for Qualcomm Snapdragon chips.

   - A firmware driver for the NXP i.MX DSP IPC protocol using shared
     memory and a mailbox

  Other changes:

   - The i.MX reset controller driver now supports the NXP i.MX8MM chip

   - Amlogic SoC specific drivers gain support for the S905X3 and A311D
     chips

   - A rework of the TI Davinci framebuffer driver to allow important
     cleanups in the platform code

   - A couple of device drivers for removed ARM SoC platforms are
     removed. Most of the removals were picked up by other maintainers,
     this contains whatever was left"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  bus: uniphier-system-bus: use devm_platform_ioremap_resource()
  soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
  dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
  firmware: ti_sci: Allow for device shared and exclusive requests
  bus: imx-weim: remove incorrect __init annotations
  fbdev: remove w90x900/nuc900 platform drivers
  spi: remove w90x900 driver
  net: remove w90p910-ether driver
  net: remove ks8695 driver
  firmware: turris-mox-rwtm: Add sysfs documentation
  firmware: Add Turris Mox rWTM firmware driver
  dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
  bus: moxtet: fix unsigned comparison to less than zero
  bus: moxtet: remove set but not used variable 'dummy'
  ARM: scoop: Use the right include
  dt-bindings: power: add Amlogic Everything-Else power domains bindings
  soc: amlogic: Add support for Everything-Else power domains controller
  fbdev: da8xx: use resource management for dma
  fbdev: da8xx-fb: drop a redundant if
  fbdev: da8xx-fb: use devm_platform_ioremap_resource()
  ...
2019-09-16 15:52:38 -07:00
Linus Torvalds
dbcda58ad9 m68k updates for v5.4
- ioremap() cleanups,
   - Defconfig updates,
   - Small fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXX9KaxUcZ2VlcnRAbGlu
 dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XAB2wD9GtMOZnUJGXxBpLeCyWTIJFlGJ85I
 OUCPIInLyOtccRcA/j1ohHLbUTWcHnYckb/us7Gq9Enw23EAI7vr9SJFhicG
 =usAa
 -----END PGP SIGNATURE-----

Merge tag 'm68k-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

Pull m68k updates from Geert Uytterhoeven:

 - ioremap() cleanups

 - defconfig updates

 - small fixes and cleanups

* tag 'm68k-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Remove ioremap_fullcache()
  m68k: Simplify ioremap_nocache()
  m68k: defconfig: Update defconfigs for v5.3-rc2
  m68k: atari: Rename shifter to shifter_st to avoid conflict
  m68k: Prevent some compiler warnings in Coldfire builds
  m68k: mac: Revisit floppy disc controller base addresses
2019-09-16 15:28:12 -07:00
Rafael J. Wysocki
beb4e08e21 Merge branch 'pm-cpufreq-qos'
* pm-cpufreq-qos:
  Documentation: cpufreq: Update policy notifier documentation
  cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
  ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier
  video: pxafb: Remove cpufreq policy notifier
  video: sa1100fb: Remove cpufreq policy notifier
  arch_topology: Use CPUFREQ_CREATE_POLICY instead of CPUFREQ_NOTIFY
  cpufreq: powerpc_cbe: Switch to QoS requests for freq limits
  cpufreq: powerpc: macintosh: Switch to QoS requests for freq limits
  thermal: cpu_cooling: Switch to QoS requests for freq limits
  cpufreq: Add policy create/remove notifiers back
2019-09-05 09:01:26 +02:00
Arnd Bergmann
c7b46e0c33 fbdev: remove w90x900/nuc900 platform drivers
The ARM w90x900 platform is getting removed, so this driver is obsolete.

Link: https://lore.kernel.org/r/20190809202749.742267-10-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 17:58:07 +02:00
Matthias Kaehlcke
c0b64faf0f backlight: pwm_bl: Set scale type for brightness curves specified in the DT
Check if a brightness curve specified in the device tree is linear or
not and set the corresponding property accordingly. This makes the
scale type available to userspace via the 'scale' sysfs attribute.

To determine if a curve is linear it is compared to a interpolated linear
curve between min and max brightness. The curve is considered linear if
no value deviates more than +/-5% of ${brightness_range} from their
interpolated value.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02 15:55:15 +01:00
Matthias Kaehlcke
511a204638 backlight: pwm_bl: Set scale type for CIE 1931 curves
For backlight curves calculated with the CIE 1931 algorithm set
the brightness scale type to non-linear. This makes the scale type
available to userspace via the 'scale' sysfs attribute.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02 15:55:11 +01:00
Matthias Kaehlcke
d55c028f8b backlight: Expose brightness curve type through sysfs
Backlight brightness curves can have different shapes. The two main
types are linear and non-linear curves. The human eye doesn't
perceive linearly increasing/decreasing brightness as linear (see
also 88ba95bedb "backlight: pwm_bl: Compute brightness of LED
linearly to human eye"), hence many backlights use non-linear (often
logarithmic) brightness curves. The type of curve currently is opaque
to userspace, so userspace often uses more or less reliable heuristics
(like the number of brightness levels) to decide whether to treat a
backlight device as linear or non-linear.

Export the type of the brightness curve via the new sysfs attribute
'scale'. The value of the attribute can be 'linear', 'non-linear' or
'unknown'. For devices that don't provide information about the scale
of their brightness curve the value of the 'scale' attribute is 'unknown'.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02 15:55:03 +01:00
Peter Ujfalusi
ec665b756e backlight: gpio-backlight: Correct initial power state handling
The default-on property - or the def_value via legacy pdata) should be
handled as:
if it is 1, the backlight must be enabled (kept enabled)
if it is 0, the backlight must be disabled (kept disabled)

This only works for the case when default-on is set. If it is not set then
the brightness of the backlight is set to 0. Now if the backlight is
enabled by external driver (graphics) the backlight will stay disabled since
the brightness is configured as 0. The backlight will not turn on.

In order to minimize screen flickering during device boot:

The initial brightness should be set to 1.

If booted in non DT mode or no phandle link to the backlight node:
follow the def_value/default-on to select UNBLANK or POWERDOWN

If in DT boot we have phandle link then leave the GPIO in a state which the
bootloader left it and let the user of the backlight to configure it
further.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02 15:54:52 +01:00
Wolfram Sang
28a1d72a22 video: backlight: tosa_lcd: drop check because i2c_unregister_device() is NULL safe
No need to check the argument of i2c_unregister_device() because the
function itself does it.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02 15:54:47 +01:00
Geert Uytterhoeven
bcd69da98e video: backlight: Drop default m for {LCD,BACKLIGHT_CLASS_DEVICE}
When running "make oldconfig" on a .config where
CONFIG_BACKLIGHT_LCD_SUPPORT is not set, two new config options
("Lowlevel LCD controls" and "Lowlevel Backlight controls") appear, both
defaulting to "m".

Drop the "default m", as options should default to disabled, and because
several driver config options already select LCD_CLASS_DEVICE or
BACKLIGHT_CLASS_DEVICE when needed.

Fixes: 8c5dc8d9f1 ("video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02 15:54:29 +01:00
Bartosz Golaszewski
671da5f344 fbdev: da8xx: use resource management for dma
Use managed variants of dma alloc functions in the da8xx fbdev driver.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-26 17:54:00 +05:30
Bartosz Golaszewski
8a3665f72d fbdev: da8xx-fb: drop a redundant if
The driver data is always set in probe. The remove() callback won't be
called if probe failed which is the only way for it to be NULL. Remove
the redundant if.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-26 17:53:59 +05:30
Bartosz Golaszewski
c957c88f7b fbdev: da8xx-fb: use devm_platform_ioremap_resource()
Shrink the code a bit by using the new helper wrapping the calls to
platform_get_resource() and devm_ioremap_resource() together.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-26 17:53:59 +05:30
Bartosz Golaszewski
3fca9e0be9 fbdev: da8xx: remove panel_power_ctrl() callback from platform data
There are no more users of panel_power_ctrl(). Remove it from the
driver.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-26 17:53:58 +05:30
Bartosz Golaszewski
611097d5da fbdev: da8xx: add support for a regulator
We want to remove the hacky platform data callback for power control.
Add a regulator to the driver data and enable/disable it next to
the current panel_power_ctrl() calls. We will use it in subsequent
patch on da850-evm.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-26 17:53:57 +05:30
Viresh Kumar
8c7d7b4bb1 video: pxafb: Remove cpufreq policy notifier
The cpufreq policy notifier's CPUFREQ_ADJUST notification is going to
get removed soon.

The notifier callback pxafb_freq_policy() isn't doing anything apart
from printing a debug message on CPUFREQ_ADJUST notification. There is
no point in keeping an otherwise empty callback and registering the
notifier.

Remove it.

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-26 10:02:02 +02:00
Viresh Kumar
eb58a4fad3 video: sa1100fb: Remove cpufreq policy notifier
The cpufreq policy notifier's CPUFREQ_ADJUST notification is going to
get removed soon.

The notifier callback sa1100fb_freq_policy() isn't doing anything apart
from printing a debug message on CPUFREQ_ADJUST notification. There is
no point in keeping an otherwise empty callback and registering the
notifier.

Remove it.

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-26 10:02:02 +02:00
Linus Torvalds
20eabc8966 Wimplicit-fallthrough patches for 5.3-rc6
Hi Linus,
 
 Please, pull the following patches that mark switch cases where we are
 expecting to fall through.
 
  - Fix fall-through warnings on arm and mips for multiple
    configurations.
 
 Thanks
 
 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAl1clmEACgkQRwW0y0cG
 2zGqbg/9HPC3Cf3oYq4o0/kV+cfS0ir6iJCz1mspFfbBloaS/EU7A2CF35bDz7k3
 XUzl/ci82EQCnuJv/X6ddayUF1S/vFWLnQXRznz07kJspUnNpu7JKgsZr2qsHaRe
 CfCj62J/Kuhnke8EUjuWEuga6YXYsYlcevgg/tpVXsTmxrpq2A15tWyut7WEe4JQ
 kWPELwYbPsDvTj2siZrgMRBx4gVzQKQVo5TpZiuADeJu9RuFT/64PI9TDQGE7c+X
 fFq4ijd1YPj/E+WI7k5VdUbXYiPIIXmkJ4VAPcu5VWmUS7y7bTeye0Jc3uYAxI1r
 7rykYhNzniGn3SZL+wq8rHchL3dTLBYhd34HhTlb5xdGFwmbzKgHBqdlGpH8HOo+
 CLu8kPYdmnzYCth4md0ENwgBVkj0tweyZuMzCys1qR6RFhOipxWLNGEvIXWZ0Sp8
 uNyXnPdCrZTmlwubwY4FOOLsGKW06GnD64cfmEYoCMcmT2j7clbjasWYM4PXQvbt
 0dVtt8k4M5LJBLh8qTX7RMZHDQYMiiYiMnLLAXf4wB0VUTqgNuLc4k0PpX3kBYtO
 4b0lU/LQH+8811BMNVBHK55StQ8DjM0C2yfQWx610eoohjV70JTyxOWoqeHFL5hq
 DIFdLDOgvJCqtyYgJDjmCmH9x6lgfvmxAKq66h9Z7vt25KLUizQ=
 =fQZm
 -----END PGP SIGNATURE-----

Merge tag 'Wimplicit-fallthrough-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull more fallthrough fixes from Gustavo A. R. Silva:
 "Fix fall-through warnings on arm and mips for multiple configurations"

* tag 'Wimplicit-fallthrough-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  video: fbdev: acornfb: Mark expected switch fall-through
  scsi: libsas: sas_discover: Mark expected switch fall-through
  MIPS: Octeon: Mark expected switch fall-through
  power: supply: ab8500_charger: Mark expected switch fall-through
  watchdog: wdt285: Mark expected switch fall-through
  mtd: sa1100: Mark expected switch fall-through
  drm/sun4i: tcon: Mark expected switch fall-through
  drm/sun4i: sun6i_mipi_dsi: Mark expected switch fall-through
  ARM: riscpc: Mark expected switch fall-through
  dmaengine: fsldma: Mark expected switch fall-through
2019-08-22 11:26:10 -07:00
Gustavo A. R. Silva
c3cb6674df video: fbdev: acornfb: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.

Fix the following warning (Building: rpc_defconfig arm):

drivers/video/fbdev/acornfb.c: In function ‘acornfb_parse_dram’:
drivers/video/fbdev/acornfb.c:860:9: warning: this statement may fall through [-Wimplicit-fallthrough=]
    size *= 1024;
    ~~~~~^~~~~~~
drivers/video/fbdev/acornfb.c:861:3: note: here
   case 'K':
   ^~~~

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-20 19:44:01 -05:00
Nishka Dasgupta
df5eff6d2a udlfb: Make dlfb_ops constant
Static structure dlfb_ops, of type fb_ops, is not used except to be
copied into another variable. Hence make dlfb_ops constant to protect it
from unintended modification.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819075236.1051-1-nishkadg.linux@gmail.com
2019-08-19 15:52:29 +02:00
Gustavo A. R. Silva
06b1f4b9f2 video: fbdev/mmp/core: Use struct_size() in kzalloc()
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct mmp_path {
	...
        struct mmp_overlay overlays[0];
};

size = sizeof(struct mmp_path) + count * sizeof(struct mmp_overlay);
instance = kzalloc(size, GFP_KERNEL)

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kzalloc(struct_size(instance, overlays, count), GFP_KERNEL)

Notice that, in this case, variable size is not necessary, hence it
is removed.

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190807161312.GA26835@embeddedor
2019-08-19 15:52:28 +02:00
Souptick Joarder
2012f7762e video: fbdev: viafb: Remove dead code
This is dead code since 3.15. If there is no plan to use
it further, this can be removed forever.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
[b.zolnierkie: fix patch summary]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1564515200-5020-1-git-send-email-jrdr.linux@gmail.com
2019-08-19 15:52:28 +02:00
Souptick Joarder
efbd44abaf video: fbdev: aty[128]fb: Remove dead code
This is dead code since 3.15. If there is no plan to use it
further, this can be removed forever.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: "Ville Syrjälä" <syrjala@sci.fi>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[b.zolnierkie: fix patch summary]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1564514053-4571-1-git-send-email-jrdr.linux@gmail.com
2019-08-19 15:52:27 +02:00
Anders Roxell
cc0c3e39e5 video: fbdev: sh_mobile_lcdcfb: Mark expected switch fall-through
Now that -Wimplicit-fallthrough is passed to GCC by default, the
following warnings shows up:

../drivers/video/fbdev/sh_mobile_lcdcfb.c: In function ‘sh_mobile_lcdc_channel_fb_init’:
../drivers/video/fbdev/sh_mobile_lcdcfb.c:2086:22: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
   info->fix.ypanstep = 2;
   ~~~~~~~~~~~~~~~~~~~^~~
../drivers/video/fbdev/sh_mobile_lcdcfb.c:2087:2: note: here
  case V4L2_PIX_FMT_NV16:
  ^~~~
../drivers/video/fbdev/sh_mobile_lcdcfb.c: In function ‘sh_mobile_lcdc_overlay_fb_init’:
../drivers/video/fbdev/sh_mobile_lcdcfb.c:1596:22: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
   info->fix.ypanstep = 2;
   ~~~~~~~~~~~~~~~~~~~^~~
../drivers/video/fbdev/sh_mobile_lcdcfb.c:1597:2: note: here
  case V4L2_PIX_FMT_NV16:
  ^~~~

Rework to address a warnings due to the enablement of
-Wimplicit-fallthrough.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
[b.zolnierkie: fix patch summary]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730152530.3055-1-anders.roxell@linaro.org
2019-08-19 15:52:26 +02:00
Chuhong Yuan
af70a48698 video: fbdev: radeonfb: Use dev_get_drvdata
Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[b.zolnierkie: fix patch summary and intendation]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724131900.2039-1-hslester96@gmail.com
2019-08-19 15:52:25 +02:00
Chuhong Yuan
70fc43c099 video: fbdev: sm712fb: Use dev_get_drvdata
Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
[b.zolnierkie: fix patch summary]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724131744.1709-1-hslester96@gmail.com
2019-08-19 15:52:24 +02:00
Gustavo A. R. Silva
dbb4a75b9c video: fbdev: pvr2fb: remove unnecessary comparison of unsigned integer with < 0
There is no need to compare *var->xoffset* or *var->yoffset* with < 0
because such variables are of type unsigned, making it impossible to
hold a negative value.

Fix this by removing such comparisons.

Addresses-Coverity-ID: 1451964 ("Unsigned compared against 0")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722203358.GA29111@embeddedor
2019-08-19 15:52:23 +02:00
Hans de Goede
51677dfcc1 efifb: BGRT: Improve efifb_bgrt_sanity_check
For various reasons, at least with x86 EFI firmwares, the xoffset and
yoffset in the BGRT info are not always reliable.

Extensive testing has shown that when the info is correct, the
BGRT image is always exactly centered horizontally (the yoffset variable
is more variable and not always predictable).

This commit simplifies / improves the bgrt_sanity_check to simply
check that the BGRT image is exactly centered horizontally and skips
(re)drawing it when it is not.

This fixes the BGRT image sometimes being drawn in the wrong place.

Cc: stable@vger.kernel.org
Fixes: 88fe4ceb24 ("efifb: BGRT: Do not copy the boot graphics for non native resolutions")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: Peter Jones <pjones@redhat.com>,
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190721131918.10115-1-hdegoede@redhat.com
2019-08-19 15:52:23 +02:00