Ice Lake RPS; Sandy Bridge RC6; and few others around
GT hangchec/reset; livelock; and a null dereference.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl59tisACgkQ+mJfZA7r
E8rKBgf/Vo+ZCQ33KLmthESO1QCENOd3QNknwZ454/rTM611x1x/xQ+j9Cv9z742
/oshYQyPzbqjDE8TYl77MYKPdn93EIfVlJOj1jmwlYms1WUlLAkIR7HgBydB0j3L
W0WMBw5BQ5b15leS/MlAJ1CKj/M6hX5pWYNGoxa8A/q3kErQFAw22J/XuvrSvKLc
lHcwLsLCq6O5M3xe1ztZZ/T5Kh1lKgTWZhG/jchxMe0Lr7R+CPUM7unU9kcBX3ml
gEFIm2a4aH6ARnq8QHnu0ziyzOP13O2DZ27+xjtKP/NlFABC8XbFlj/N13kumfuk
uKMwX2O8PcZykStYyINc1DIL1FJmog==
=2wdN
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2020-03-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Fixes for instability on Baytrail and Haswell;
Ice Lake RPS; Sandy Bridge RC6; and few others around
GT hangchec/reset; livelock; and a null dereference.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200327081607.GA3082710@intel.com
amd-drm-next-5.7-2020-03-26:
amdgpu:
- Remove a dpm quirk that is not necessary
- Fix handling of AC/DC mode in newer SMU firmwares on navi
- SR-IOV fixes
- RAS fixes
scheduler:
- Fix a race condition
radeon:
- Remove a dpm quirk that is not necessary
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326155310.5486-1-alexander.deucher@amd.com
Now that flags are handled on a fine-grained per-page basis this global
flag is redundant and has a confusing overlap with the pfn_flags_mask and
default_flags.
Normalize the HMM_FAULT_SNAPSHOT behavior into one place. Callers needing
the SNAPSHOT behavior should set a pfn_flags_mask and default_flags that
always results in a cleared HMM_PFN_VALID. Then no pages will be faulted,
and HMM_FAULT_SNAPSHOT is not a special flow that overrides the masking
mechanism.
As this is the last flag, also remove the flags argument. If future flags
are needed they can be part of the struct hmm_range function arguments.
Link: https://lore.kernel.org/r/20200327200021.29372-5-jgg@ziepe.ca
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current mode validation impedes setting up some video modes which should
be supported otherwise. Namely 1920x1200@60Hz.
Fix this by lowering the minimum HDMI state machine clock to pixel clock
ratio allowed.
Fixes: 32e823c63e ("drm/vc4: Reject HDMI modes with too high of clocks.")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326122001.22215-1-nsaenzjulienne@suse.de
Add llu suffix and cast operator to fix the klocwork warning about
"Operands in a bitwise operation have different size"
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200324123021.15831-1-tina.zhang@intel.com
hmm_range_fault() will succeed for any kind of device private memory, even
if it doesn't belong to the calling entity. While nouveau has some crude
checks for that, they are broken because they assume nouveau is the only
user of device private memory. Fix this by passing in an expected pgmap
owner in the hmm_range_fault structure.
If a device_private page is found and doesn't match the owner then it is
treated as an non-present and non-faultable page.
This prevents a bug in amdgpu, where it doesn't know how to handle
device_private pages, but hmm_range_fault would return them anyhow.
Fixes: 4ef589dc9b ("mm/hmm/devmem: device memory hotplug using ZONE_DEVICE")
Link: https://lore.kernel.org/r/20200316193216.920734-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the HMM_PFN_DEVICE_PRIVATE flag, no driver has ever set this flag
on input, and the only place that uses it on output can be trivially
changed to use is_device_private_page().
This removes the ability to request that device_private pages are faulted
back into system memory.
Link: https://lore.kernel.org/r/20200316193216.920734-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a new src_owner field to struct migrate_vma. If the field is set,
only device private pages with page->pgmap->owner equal to that field are
migrated. If the field is not set only "normal" pages are migrated.
Fixes: df6ad69838 ("mm/device-public-memory: device memory cache coherent with CPU")
Link: https://lore.kernel.org/r/20200316193216.920734-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a new opaque owner field to struct dev_pagemap, which will allow the
hmm and migrate_vma code to identify who owns ZONE_DEVICE memory, and
refuse to work on mappings not owned by the calling entity.
Link: https://lore.kernel.org/r/20200316193216.920734-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch fixes the private_flags of mode to be checked and
compared against uapi.mode and not from hw.mode. This helps
properly trigger modeset at boot if desired by driver.
It helps resolve audio_codec initialization issues if display
is connected at boot. Initial discussion on this issue has happened
on below thread:
https://patchwork.freedesktop.org/series/74828/
v2: No functional change. Fixed the Closes tag and added
Maarten's RB.
v3: Added Fixes tag.
Cc: Ville Syrjä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Souza, Jose <jose.souza@intel.com>
Fixes: 58d124ea27 ("drm/i915: Complete crtc hw/uapi split, v6.")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1363
Suggested-by: Ville Syrjä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: SweeAun Khor <swee.aun.khor@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326125111.11081-1-uma.shankar@intel.com
(cherry picked from commit d5e5670592)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We move the virtual breadcrumb from one physical engine to the next, if
the next virtual request is scheduled on a new physical engine. Since
the virtual context can only be in one signal queue, we need it to track
the current physical engine for the new breadcrumbs. However, to move
the list we need both breadcrumb locks -- and since we cannot take both
at the same time (unless we are careful and always ensure consistent
ordering) stage the movement of the signaler via the current virtual
request.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1510
Fixes: 6d06779e86 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325130059.30600-1-chris@chris-wilson.co.uk
(cherry picked from commit 6c81e21a47)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On Ivybridge, we can go lower than rc6 to rc6p. And this is required for
Ivybridge to hit the same minimum power consumption as rc6 on other
platforms, so make it so.
v2: Update selftest to include all rc6 residency counters
Note that Andi did mention that we should be converting the magic
numbers into opaque magic macros, so if they ever get reused (unlikely
given only Ivybridge used the extra modes) we'll need to pay back the
technical debt.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1518
Fixes: 730eaeb524 ("drm/i915/gt: Manual rc6 entry upon parking")
Testcase: igt/i915_pm_rc6_residency/rc6-idle
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324134232.8773-1-chris@chris-wilson.co.uk
(cherry picked from commit 13c5a577b3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Abuse^W Take advantage that we know we are inside the GT wakeref and
that prevents any client execbuf from reopening the i915_vma in order to
claim all the vma to close without having to drop the spinlock to free
each one individually. By keeping the spinlock, we do not have to
restart if we run concurrently with i915_gem_free_objects -- which
causes them both to restart continually and make very very slow
progress.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1361
Fixes: 77853186e5 ("drm/i915: Claim vma while under closed_lock in i915_vma_parked()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323092841.22240-2-chris@chris-wilson.co.uk
(cherry picked from commit 3447c4c55d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we park/unpark faster than we can respond to RPS events, we never
will process a downclock event after expiring a waitboost, and thus we
will forever restart the GPU at max clocks even if the workload switches
and doesn't justify full power.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1500
Fixes: 3e7abf8141 ("drm/i915: Extract GT render power state management")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200322163225.28791-1-chris@chris-wilson.co.uk
Cc: <stable@vger.kernel.org> # v5.5+
(cherry picked from commit 21abf0bf16)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Use the restored ability to check if a context is closed to decide
whether or not to immediately ban the context from further execution
after a hang.
Fixes: be90e34483 ("drm/i915/gt: Cancel banned contexts after GT reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319170707.8262-2-chris@chris-wilson.co.uk
(cherry picked from commit 8e37d69913)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
I need to keep the GEM context around a bit longer so adding an explicit
flag for syncing execbuf with closed/abandonded contexts.
v2:
* Use already available context flags. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319170707.8262-1-chris@chris-wilson.co.uk
(cherry picked from commit 207e4a71fb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The vboxvideo driver is missing a call to remove conflicting framebuffers.
Surprisingly, when using legacy BIOS booting this does not really cause
any issues. But when using UEFI to boot the VM then plymouth will draw
on both the efifb /dev/fb0 and /dev/drm/card0 (which has registered
/dev/fb1 as fbdev emulation).
VirtualBox will actual display the output of both devices (I guess it is
showing whatever was drawn last), this causes weird artifacts because of
pitch issues in the efifb when the VM window is not sized at 1024x768
(the window will resize to its last size once the vboxvideo driver loads,
changing the pitch).
Adding the missing drm_fb_helper_remove_conflicting_pci_framebuffers()
call fixes this.
Changes in v2:
-Make the drm_fb_helper_remove_conflicting_pci_framebuffers() call one of
the first things we do in our probe() method
Cc: stable@vger.kernel.org
Fixes: 2695eae1f6 ("drm/vboxvideo: Switch to generic fbdev emulation")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325144310.36779-1-hdegoede@redhat.com
There is one one corner case at dma_fence_signal_locked
which will raise the NULL pointer problem just like below.
->dma_fence_signal
->dma_fence_signal_locked
->test_and_set_bit
here trigger dma_fence_release happen due to the zero of fence refcount.
->dma_fence_put
->dma_fence_release
->drm_sched_fence_release_scheduled
->call_rcu
here make the union fled “cb_list” at finished fence
to NULL because struct rcu_head contains two pointer
which is same as struct list_head cb_list
Therefore, to hold the reference of finished fence at drm_sched_process_job
to prevent the null pointer during finished fence dma_fence_signal
[ 732.912867] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 732.914815] #PF: supervisor write access in kernel mode
[ 732.915731] #PF: error_code(0x0002) - not-present page
[ 732.916621] PGD 0 P4D 0
[ 732.917072] Oops: 0002 [#1] SMP PTI
[ 732.917682] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G OE 5.4.0-rc7 #1
[ 732.918980] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
[ 732.920906] RIP: 0010:dma_fence_signal_locked+0x3e/0x100
[ 732.938569] Call Trace:
[ 732.939003] <IRQ>
[ 732.939364] dma_fence_signal+0x29/0x50
[ 732.940036] drm_sched_fence_finished+0x12/0x20 [gpu_sched]
[ 732.940996] drm_sched_process_job+0x34/0xa0 [gpu_sched]
[ 732.941910] dma_fence_signal_locked+0x85/0x100
[ 732.942692] dma_fence_signal+0x29/0x50
[ 732.943457] amdgpu_fence_process+0x99/0x120 [amdgpu]
[ 732.944393] sdma_v4_0_process_trap_irq+0x81/0xa0 [amdgpu]
v2: hold the finished fence at drm_sched_process_job instead of
amdgpu_fence_process
v3: resume the blank line
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1) SRIOV guest KMD doesn't care training buffer
2) if we resered training buffer that will overlap with IP discovery
reservation because training buffer is at vram_size - 0x8000 and
IP discovery is at ()vram_size - 0x10000 => vram_size -1)
v2: squash in warning fix from Nirmoy
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver needs to send the ack message when it receives the
AC/DC interrupt from the SMU.
TODO: verify the client and src ids.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/1043
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For boards that do not support automatic AC/DC transitions
in firmware, manually tell the firmware when the status
changes.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/1043
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check the platform caps in the vbios pptable to decide
whether to enable automatic AC/DC transitions.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/1043
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check of the pointer exists and we are actually on AC power.
v2: fix error message to reflect AC/DC mode.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/1043
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW may boots those ASICs with DC mode. Need to set it back
to AC mode.
v2: split from Evan's original patch (Alex)
Bug: https://gitlab.freedesktop.org/drm/amd/issues/1043
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a common smu11 helper to set the AC/DC power source.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/1043
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is needed to tell the SMU firmware what state is in
in certain cases. DC mode does not allow overclocking
for example.
v2: split Evan's original patch (Alex)
Bug: https://gitlab.freedesktop.org/drm/amd/issues/1043
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is one one corner case at dma_fence_signal_locked
which will raise the NULL pointer problem just like below.
->dma_fence_signal
->dma_fence_signal_locked
->test_and_set_bit
here trigger dma_fence_release happen due to the zero of fence refcount.
->dma_fence_put
->dma_fence_release
->drm_sched_fence_release_scheduled
->call_rcu
here make the union fled “cb_list” at finished fence
to NULL because struct rcu_head contains two pointer
which is same as struct list_head cb_list
Therefore, to hold the reference of finished fence at drm_sched_process_job
to prevent the null pointer during finished fence dma_fence_signal
[ 732.912867] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 732.914815] #PF: supervisor write access in kernel mode
[ 732.915731] #PF: error_code(0x0002) - not-present page
[ 732.916621] PGD 0 P4D 0
[ 732.917072] Oops: 0002 [#1] SMP PTI
[ 732.917682] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G OE 5.4.0-rc7 #1
[ 732.918980] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
[ 732.920906] RIP: 0010:dma_fence_signal_locked+0x3e/0x100
[ 732.938569] Call Trace:
[ 732.939003] <IRQ>
[ 732.939364] dma_fence_signal+0x29/0x50
[ 732.940036] drm_sched_fence_finished+0x12/0x20 [gpu_sched]
[ 732.940996] drm_sched_process_job+0x34/0xa0 [gpu_sched]
[ 732.941910] dma_fence_signal_locked+0x85/0x100
[ 732.942692] dma_fence_signal+0x29/0x50
[ 732.943457] amdgpu_fence_process+0x99/0x120 [amdgpu]
[ 732.944393] sdma_v4_0_process_trap_irq+0x81/0xa0 [amdgpu]
v2: hold the finished fence at drm_sched_process_job instead of
amdgpu_fence_process
v3: resume the blank line
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set ComputePGMRSRC1.VGPRS as 0x3f to clear all ArcVGPRs.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit '16f17eda8bad ("drm/amd/display: Send vblank and user
events at vsartup for DCN")' introduces a new way of pageflip
completion handling for DCN, and some trouble.
The current implementation introduces a race condition, which
can cause pageflip completion events to be sent out one vblank
too early, thereby confusing userspace and causing flicker:
prepare_flip_isr():
1. Pageflip programming takes the ddev->event_lock.
2. Sets acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED
3. Releases ddev->event_lock.
--> Deadline for surface address regs double-buffering passes on
target pipe.
4. dc_commit_updates_for_stream() MMIO programs the new pageflip
into hw, but too late for current vblank.
=> pflip_status == AMDGPU_FLIP_SUBMITTED, but flip won't complete
in current vblank due to missing the double-buffering deadline
by a tiny bit.
5. VSTARTUP trigger point in vblank is reached, VSTARTUP irq fires,
dm_dcn_crtc_high_irq() gets called.
6. Detects pflip_status == AMDGPU_FLIP_SUBMITTED and assumes the
pageflip has been completed/will complete in this vblank and
sends out pageflip completion event to userspace and resets
pflip_status = AMDGPU_FLIP_NONE.
=> Flip completion event sent out one vblank too early.
This behaviour has been observed during my testing with measurement
hardware a couple of time.
The commit message says that the extra flip event code was added to
dm_dcn_crtc_high_irq() to prevent missing to send out pageflip events
in case the pflip irq doesn't fire, because the "DCH HUBP" component
is clock gated and doesn't fire pflip irqs in that state. Also that
this clock gating may happen if no planes are active. This suggests
that the problem addressed by that commit can't happen if planes
are active.
The proposed solution is therefore to only execute the extra pflip
completion code iff the count of active planes is zero and otherwise
leave pflip completion handling to the pflip irq handler, for a
more race-free experience.
Note that i don't know if this fixes the problem the original commit
tried to address, as i don't know what the test scenario was. It
does fix the observed too early pageflip events though and points
out the problem introduced.
Fixes: 16f17eda8b ("drm/amd/display: Send vblank and user events at vsartup for DCN")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The "data-mapping" property may not be the best way to describe the
interface between panels and display interfaces.
Drop use of in the panel-simple driver, so we have time to find
the right way to describe this interface.
Fixes: 4a1d0dbc83 ("drm/panel: simple: add panel-dpi support")
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314153047.2486-3-sam@ravnborg.org
Driver changes for ti-sysc interconnect target module driver mostly
to be able to probe display subsystem (DSS) without platform data:
- Rename clk_enable/disable quirks to less confusing pre and post
reset quirks
- Enable module reset to work with modules with no sysconfig register
- Also consider non-existing module register when matching quirks
- Don't warn with nested ti-sysc devices
- Implement basic SoC revision handling
- Detect DSS related devices
- Implement DSS reset quirks
Note that there is also a DSS driver specific probe fix to allow
probing devices configured for interconnect target module data that
was agreed to be merged along with the ti-sysc driver changes.
And then there also changes to handle RTC, EDMA and PRUSS:
- Add module unlock quirk for RTC
- Detect EDMA modules
- Add support for handling PRUSS
-----BEGIN PGP SIGNATURE-----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=KmZS
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.7/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers
Driver changes for ti-sysc for v5.7 merge window
Driver changes for ti-sysc interconnect target module driver mostly
to be able to probe display subsystem (DSS) without platform data:
- Rename clk_enable/disable quirks to less confusing pre and post
reset quirks
- Enable module reset to work with modules with no sysconfig register
- Also consider non-existing module register when matching quirks
- Don't warn with nested ti-sysc devices
- Implement basic SoC revision handling
- Detect DSS related devices
- Implement DSS reset quirks
Note that there is also a DSS driver specific probe fix to allow
probing devices configured for interconnect target module data that
was agreed to be merged along with the ti-sysc driver changes.
And then there also changes to handle RTC, EDMA and PRUSS:
- Add module unlock quirk for RTC
- Detect EDMA modules
- Add support for handling PRUSS
* tag 'omap-for-v5.7/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Add support for PRUSS SYSC type
dt-bindings: bus: ti-sysc: Add support for PRUSS SYSC type
bus: ti-sysc: Detect EDMA and set quirk flags for tptc
bus: ti-sysc: Fix wrong offset for display subsystem reset quirk
bus: ti-sysc: Implement display subsystem reset quirk
bus: ti-sysc: Detect display subsystem related devices
bus: ti-sysc: Handle module unlock quirk needed for some RTC
bus: ti-sysc: Implement SoC revision handling
bus: ti-sysc: Don't warn about legacy property for nested ti-sysc devices
bus: ti-sysc: Consider non-existing registers too when matching quirks
bus: ti-sysc: Improve reset to work with modules with no sysconfig
bus: ti-sysc: Rename clk related quirks to pre_reset and post_reset quirks
bus: ti-sysc: Fix 1-wire reset quirk
drm/omap: Prepare DSS for probing without legacy platform data
Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- fix for potential out-of-bounds reads in the perfmon ioctl
implementation from Christian
- override to expose proper feature flags for the GC400 found on the
STM32MP1 SoC, also from Christian
- Guido fixed an issue where we would spuriously fail to enter
runtime suspend due to a new GPU engine status bit on GC7000
- tree-wide change from Gustavo to get rid of zero-length arrays
- fix for missed TS cache flush on GC7000, leading to spurious
MMU faults from me
- request pages from DMA32 zone on systems where we can't address
all present memory from me
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/74d9c6d19099fdba6c6795204a6aa445b7930c79.camel@pengutronix.de
Start using the helpers that align buffer object user-space addresses and
buffer object vram addresses to huge page boundaries.
This is to improve the chances of allowing huge page-table entries.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Christian König <christian.koenig@amd.com>
Using huge page-table entries requires that the physical address of the
start of a buffer object is huge page size aligned.
Make a special version of the TTM range manager that accomplishes this,
but falls back to a smaller page size alignment (PUD->PMD, PMD->NORMAL)
to avoid eviction.
If other drivers want to use it in the future, it can be made a
TTM generic helper. Note that drivers can force eviction for a certain
alignment by assigning the TTM GPU alignment correspondingly.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Christian König <christian.koenig@amd.com>
Unaligned virtual addresses makes it unlikely that huge page-table entries
can be used.
So align virtual buffer object address huge page boundaries to the
underlying physical address huge page boundaries taking buffer object
sizes into account to determine when it might be possible to use huge
page-table entries.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Christian König <christian.koenig@amd.com>
With vmwgfx dirty-tracking we need a specialized huge_fault
callback. Implement and hook it up.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Christian König <christian.koenig@amd.com>
Support huge (PMD-size and PUD-size) page-table entries by providing a
huge_fault() callback.
We still support private mappings and write-notify by splitting the huge
page-table entries on write-access.
Note that for huge page-faults to occur, either the kernel needs to be
compiled with trans-huge-pages always enabled, or the kernel needs to be
compiled with trans-huge-pages enabled using madvise, and the user-space
app needs to call madvise() to enable trans-huge pages on a per-mapping
basis.
Furthermore huge page-faults will not succeed unless buffer objects and
user-space addresses are aligned on huge page size boundaries.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
___
v2: Use 2.18 instead of 2.17
Add a new param for user-space to determine if kernel module is SM5
capable.
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Surface define v4 added new member buffer_byte_stride. With this patch
add buffer_byte_stride in surface metadata and create surface using new
command if support is available.
Also with this patch replace device specific data types with kernel
types.
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Makes surface_define cleaner by sending vmw_surface_metadata instead of
all the arguments individually.
v2: fix uninitialized return value, error message
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Create a new structure vmw_surface_metadata representing the metadata
used for creating surface. With this can make the surface_define_priv
a bit cleaner.
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
With SM5 capability a new version of streamoutput is supported by device
which need backing mob and a new field. With this change the new command
is supported in command buffer.
v2: Also track streamoutput context binding in binding manager.
v3: Track only one streamoutput as only one can be set to context.
v4: Fix comment typos
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Signed-off-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Previous name vmw_ctx_bindinfo_so is misleading because it actually
represent so target and stream output is a new resource type that needs
tracking for SM5 capable device. Also rename binding type enum and
internal functions to reflect these belongs to so targets.
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Validate indirect and dispatch commands in command buffer.
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Virtual device now support new commands to manage unordered access
views. Allow them as part of user-space command buffer. This involves
adding UA view cotable, binding tracker info, new view type and command
verifier functions.
v2: fix comment typo
v3: style fixes (don't use deprecated PTR_RET)
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Signed-off-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Virtual device now supports new shader types, allow them as valid shader
type in command buffer. Also add per shader bind info in binding manager
state for new shader type.
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Virtual device added new register for suggested GB memory, read the new
register when available.
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
A new enum to represent new SM5 graphics context capability in vmwgfx.
v2: use new correct cap bits (merged several later commits into it).
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Signed-off-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Get the latest device headers for SM5 and other features development.
v2: sync to newer bits (merge later commits)
v3: sync to even newer bits
Co-developed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Signed-off-by: Neha Bhende <bhenden@vmware.com>
Signed-off-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Instead of having different bool in device private to represent
incremental graphics context capabilities, add a new sm type enum.
v2: Use enum instead of bit flag.
v3: Incorporated review comments.
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Logic ops commands are marked as deprecated by virtual device and were
never used by vmwgfx.
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
In favor of SM4.1 multisampling capability, virtual device deprecated
old multisampling device capability. Mark legacy multisampling device
capability as dead. Rename the function that masks legacy multisample
capability to reflect that now it is masking a deprecated feature.
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Virtual device consider SVGA_CAP_DX and SVGA3D_DEVCAP_DXCONTEXT
independent of each other. Some of the commands in cmd_buf depends on
SVGA_CAP_DX, so better to check for that as well.
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
As seen in the Vivante kernel driver, most GPUs with the BLT engine have
a broken TS cache flush. The workaround is to temporarily set the BLT
command to CLEAR_IMAGE, without actually executing the clear. Apparently
this state change is enough to trigger the required TS cache flush. As
the BLT engine is completely asychronous, we also need a few more stall
states to synchronize the flush with the frontend.
Root-caused-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Some Vivante GPUs are found in systems that have interconnects restricted
to 32 address bits, but may have system memory mapped above the 4GB mark.
As this region isn't accessible to the GPU via DMA any GPU memory allocated
in the upper part needs to go through SWIOTLB bounce buffering. This kills
performance if it happens too often, as well as overrunning the available
bounce buffer space, as the GPU buffer may stay mapped for a long time.
Avoid bounce buffering by checking the addressing restrictions. If the
GPU is unable to access memory above the 4GB mark, request our SHM buffers
to be located in the DMA32 zone.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
RLCG is enabled by host driver, no need to enable it in guest for none-PSP load path
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MMHub EDC becomes dirty after BACO reset
EDC registers should be cleared early on in reset phase
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GMU has very few memory allocations and uses a flat memory space so
there is no good reason to go out of our way to bypass the DMA APIs which
were basically designed for this exact scenario.
v7: Check return value of dma_set_mask_and_coherent
v4: Use dma_alloc_wc()
v3: Set the dma mask correctly and use dma_addr_t for the iova type
v2: Pass force_dma false to of_dma_configure to require that the DMA
region be set up and return error from of_dma_configure to fail probe.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
On running several back to back perf capture sessions involving closing
and opening the perf stream, invalid OA reports are seen in the
beginning of the OA buffer in some sessions. Fix this by invalidating OA
TLB when the perf stream is closed or disabled on gen12.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 00a7f0d715 ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309211057.38575-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit a639b0c150)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The residual w/a batch is causing system instablity on Ivybridge and
Baytrail under some workloads, so disable until resolved.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1405
Fixes: 47f8253d2b ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311103640.26572-1-chris@chris-wilson.co.uk
(cherry picked from commit a62774782b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UrsU
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.7' of https://github.com/ckhu-mediatek/linux.git-tags into drm-next
Mediatek DRM Next for Linux 5.7
This include MT8183 DPI support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1584580683.29614.5.camel@mtksdaap41
- Track active elements during dequeue
- Fix failure to handle all MCR ranges
- Revert unnecessary workaround
-----BEGIN PGP SIGNATURE-----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=ELTv
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2020-03-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.6-rc7:
- Track active elements during dequeue
- Fix failure to handle all MCR ranges
- Revert unnecessary workaround
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/877dzgepvu.fsf@intel.com
Commit '16f17eda8bad ("drm/amd/display: Send vblank and user
events at vsartup for DCN")' introduces a new way of pageflip
completion handling for DCN, and some trouble.
The current implementation introduces a race condition, which
can cause pageflip completion events to be sent out one vblank
too early, thereby confusing userspace and causing flicker:
prepare_flip_isr():
1. Pageflip programming takes the ddev->event_lock.
2. Sets acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED
3. Releases ddev->event_lock.
--> Deadline for surface address regs double-buffering passes on
target pipe.
4. dc_commit_updates_for_stream() MMIO programs the new pageflip
into hw, but too late for current vblank.
=> pflip_status == AMDGPU_FLIP_SUBMITTED, but flip won't complete
in current vblank due to missing the double-buffering deadline
by a tiny bit.
5. VSTARTUP trigger point in vblank is reached, VSTARTUP irq fires,
dm_dcn_crtc_high_irq() gets called.
6. Detects pflip_status == AMDGPU_FLIP_SUBMITTED and assumes the
pageflip has been completed/will complete in this vblank and
sends out pageflip completion event to userspace and resets
pflip_status = AMDGPU_FLIP_NONE.
=> Flip completion event sent out one vblank too early.
This behaviour has been observed during my testing with measurement
hardware a couple of time.
The commit message says that the extra flip event code was added to
dm_dcn_crtc_high_irq() to prevent missing to send out pageflip events
in case the pflip irq doesn't fire, because the "DCH HUBP" component
is clock gated and doesn't fire pflip irqs in that state. Also that
this clock gating may happen if no planes are active. This suggests
that the problem addressed by that commit can't happen if planes
are active.
The proposed solution is therefore to only execute the extra pflip
completion code iff the count of active planes is zero and otherwise
leave pflip completion handling to the pflip irq handler, for a
more race-free experience.
Note that i don't know if this fixes the problem the original commit
tried to address, as i don't know what the test scenario was. It
does fix the observed too early pageflip events though and points
out the problem introduced.
Fixes: 16f17eda8b ("drm/amd/display: Send vblank and user events at vsartup for DCN")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also log buffers with the DUMP flag set, to ensure we capture all useful
cmdstream in crashdump state with modern mesa.
Otherwise we miss out on the contents of "state object" cmdstream
buffers.
v2: add missing 'inline'
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
If the opp table specifies opp-supported-hw as a property but the driver
has not set a supported hardware value the OPP subsystem will reject
all the table entries.
Set a "default" value that will match the default table entries but not
conflict with any possible real bin values. Also fix a small memory leak
and free the buffer allocated by nvmem_cell_read().
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes coccicheck warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c:27:51-52: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c:109:51-52: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c:167:12-13: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c:167:22-23: WARNING comparing pointer to 0
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes coccicheck warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c:242:48-49: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c:562:25-26: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c:562:48-49: WARNING comparing pointer to 0
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes coccicheck warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:414:52-53: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:443:56-57: WARNING comparing pointer to 0
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function _dpu_debugfs_show_regset32:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:142:26: warning: variable priv set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function dpu_kms_prepare_commit:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:271:21: warning: variable dev set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function _dpu_kms_hw_destroy:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:555:21: warning: variable dev set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function dpu_kms_hw_init:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:763:26: warning: variable priv set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function dpu_runtime_suspend:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1021:21: warning: variable ddev set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: tongtiangen <tongtiangen@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
We should free resources in unlikely case of allocation failure.
Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Each of hdmi and edp are already attached in msm_*_bridge_init. A second
attachment returns -EBUSY, failing the driver load.
Tested with HDMI on IFC6410 (APQ8064 / MDP4), but eDP case should be
analogous.
Fixes: 3ef2f119bd (drm/msm: Use drm_attach_bridge() to attach a bridge to an encoder)
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> (hdmi part)
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Move mapping of resources to encoder ids from the resource manager to a
new dpu_global_state struct. Store this struct in global atomic state.
Before this patch, atomic test would be performed by modifying global
state (resource manager), and backing out any changes if the test fails.
By using drm atomic global state, this is not necessary as any changes
to the global state will be discarded if the test fails.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Track hardware resource objects in arrays rather than
a list and remove the resource manager's iterator idiom. Separate
the mapping of hardware resources to an encoder ID into a different
array.
Use an implicit mapping between the hardware blocks' ids, which
are 1-based, and array indices in these arrays to replace iteration
with index lookups in several places.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
[squash in minor compiler warning fixes]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Make iterator implementation private, and add function to
query resources assigned to an encoder.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Several functions arguments in the resource manager are unused, so
remove them.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
There are spelling mistakes in pr_err messages and a comment. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang warns:
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:754:6: warning: variable 'shadow'
is used uninitialized whenever 'if' condition is
false [-Wsometimes-uninitialized]
if (offset == grbm_cntl || offset == grbm_idx)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:757:6: note: uninitialized use
occurs here
if (shadow) {
^~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:754:2: note: remove the 'if' if
its condition is always true
if (offset == grbm_cntl || offset == grbm_idx)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:738:13: note: initialize the
variable 'shadow' to silence this warning
bool shadow;
^
= 0
1 warning generated.
shadow is only assigned in one condition and used as the condition for
another if statement; combine the two if statements and remove shadow
to make the code cleaner and resolve this warning.
Fixes: 2e0cc4d48b ("drm/amdgpu: revise RLCG access path")
Link: https://github.com/ClangBuiltLinux/linux/issues/936
Suggested-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix typo for vcn2.5/jpeg2.5 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix typo for vcn2/jpeg2 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix typo for vcn1 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The CAP fw is for enabling driver compatibility. Currently, it only
enabled for vega10 VF.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
issue smu cmd to disable all features upon baco entry for arcturus
to mitigate potential dirty I2C controller on boot
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Originally, only the PTE valid is taken in consider.
The PRT case is missied when bo update which raise problem.
We need add condition for PRT case.
v2: add PRT condition for amdgpu_vm_bo_update_mapping, too
v3: fix one typo error
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds logic that will determine if pipes need merging during validation.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The scratch space can be used to pass data between x86 and DMCUB. DMCUB
will manage the actually mapping of CW7 internally, driver does not
program the window.
[How]
Allocate extra space within the DMUB service's framebuffer for this
scratch space and expose them from the service for use in DC.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
before update dpp DTO, we check dppclks in context to determine it is
changed or not, but dppclks in context will be updated anyways after
flip is done, so compare dppclks in context will always get an equal
result.
[How]
Add pipe dpp clks in dccg and compare values between dccg and context.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Causes regression with MST DSC displays not lighting up after DPMS
[how]
Revert commit 8cc426d79b ("drm/amd/display: Program DSC during timing programming")
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
underflow happened when playing video on 1366x768 + 4K clone mode due to
incorrect handle watermark change flag and lower down clocks to early.
[How]
Check watermark change flag when decide doing optimized, and check
optimized required flag to do clock update.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
this register not exist in some asic, based on request remove this from
dc.
[how]
add guard for sanization.
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We should check MST BU support capability on output port before building
vsc info packet.
[How]
Add a new definition for port and sink capability check.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In headless boot cases, self refresh control registers are not
programmed on boot. In certain hybrid graphics cases this may cause
cstate entering to get blocked causing a hang.
[HOW]
Program self refresh control register on boot.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DP doesn't have message id as the first byte of an hdcp message,
current hdcp psp unifies HDMI and DP message so that it is required
when reading DP HDCP messages in hdcp_ddc, a message id needs to be
added as the first byte of the HDCP message.
The id is currently assigned as a magic number which is not a good
coding practice.
[how]
Replace magic numbers with macro defined in hdcp headers.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to be able to enable/disable psr on dmcub and fallback to dmcu
when necessary.
[How]
Use dc config option to do so.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The default value for disable_dmcu is true, even for asics that require
dmcu.
[How]
Set flag properly per asic.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The PSR enablement was dependent on swizzle as a workaround for
non-pageflipping fb console. It's no longer required.
[How]
Remove PSR-enable dependency on swizzle mode.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This is enabled by default on Renoir but there's userspace/API support
to actually make use of this.
Since we're not passing this down through surface updates, let's
explicitly disable this for now.
This fixes "dcn20_program_front_end_for_ctx" warnings associated with
incorrect/unexpected programming sequences performed while this is
enabled.
[How]
Disable it at the topmost level in DM in case anyone tries to flip this
to enabled for any of the other ASICs like Navi10/14.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A "dcn20_program_front_end_for_ctx" warning is observed on Renoir.
Since the resource definition doesn't explicitly disable triplebuffer
flips like Navi10 DC actually attempts to go and setup triplebuffering
even when we pass in false to the plane state.
If we hit a full update after triplebuffering has been setup we see the
assertion since we don't expect full updates while performing
triplebuffer flips.
Normally this would get reset back to false whne we pass in the new
plane state, but since we never actually copy the flag when doing
surface updates this doesn't happen.
[How]
Copy the flag onto the plane update based on the requested surface
update state.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Right now only stream count is used to avoid split. This change updates
the W/A to check plane count instead.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When hotplug a HDMI monitor during entering S0i3 or DPMSOFF state due to
entering infinite loop when calling vbios to program pixel clocks. In
this scenario, pll is enabled but phy is not, and there is not a
programing guide for this case.
[How]
Before we having the proper programing guide, before disable pll, doing
a phy enable and disable to avoid the issue.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Due to previous code changes displays which are in active state
immediately transition to the active and added state. This makes the two
states redundant and unnecessary.
[How]
Instead of updating the device state to active and added after
successful addition, change state to inactive if addition failed. Also,
change references to active and added state to just added state.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When reprogram MSA with updated color space, the test color space shows
inconsistency. Linux has separate routine to set up test pattern color
space, but it fails to configure RGB.
[How]
Add RGB to test pattern.
Fixes: 43563bc2e6 ("drm/amd/display: update MSA and VSC SDP on video test pattern request")
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
drm_connector->display_info is not passed to amdgpu_dm right way after
read edid.
[How]
display_info is parsed from edid and saved into drm_connector by
drm_connector_update_edid_proerty which is called within
amdgpu_dm_update_connector_after_detect. call this function after read
edid to update drm_connector->display_info
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Not programming dto with same values causes test failures in DCN2 diags
DPP tests.
[HOW]
This reverts commit 1b53e73323.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
. Replace the hand rolled encoder bitmask thing with drm_encoder_mask()
. Use mode->clock instead of reverse calculating it from the vrefresh
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wMbf
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Two cleanups
. Replace the hand rolled encoder bitmask thing with drm_encoder_mask()
. Use mode->clock instead of reverse calculating it from the vrefresh
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1584320957-9442-1-git-send-email-inki.dae@samsung.com
On i915 we have a new UAPI to allow userspace to specify CS ring buffer size on
construction (I915_CONTEXT_PARAM_RINGSIZE) and also new sysfs entries exposing
various engine properties
GVT Changes:
VFIO edid getting expanded to all platforms and a big cleanup around attr
group, unused vblank complete, kvmgt, Intel engine and dev_priv usages.
i915 Changes:
- new UAPI to allow userspace to specify CS ring buffer size on construction
(I915_CONTEXT_PARAM_RINGSIZE) - (Chris)
- New sysfs entries exposing various engine properties (Chris)
- Tiger Lake is out of require_force_probe protection (Jose)
- Changes in many places around active requests, reset and heartbeat (Chris)
- Stop assigning drm-dev_private pointer (Jani)
- Many code refactor in many places, including intel_modeset_init,
increasing use of intel_uncore_*, vgpu, and gvt stuff (Jani)
- Fixes around display pipe iterators (Anshuman)
- Tigerlake enabling work (Matt Ropper, Matt Atwood, Ville, Lucas, Daniele,
Jose, Anusha, Vivek, Swathi, Caz. Kai)
- Code clean-up like reducing use of drm/i915_drv.h, removing unused
registers, removing garbage warns, and some other code polishing (Jani, Lucas,
Ville)
- Selftests fixes, improvements and additions (Chris, Dan, Aditya, Matt Auld)
- Fix plane possible_crtcs bit mask (Anshuman)
- Fixes and cleanup on GLK pre production identification and w/a (Ville)
- Fix display orientation on few cases (Hans, Ville)
- dbuf clean-up and improvements for slice arrays handling (Ville)
- Improvement around min cdclk calculation (Stanislav)
- Fixes and refactor around display PLLs (Imre)
- Other execlists and perf fixes (Chris)
- Documentation fixes (Jani, Chris)
- Fix build issue (Anshuman)
- Many more fixes around the locking mechanisms (Chris)
- Other fixes and debugability info around preemption (Chris, Tvrtko)
- Add mechanism to submit a context WA on ring submission (Mika)
- Clear all Eu/L3 resitual context (Prathap)
- More changes around local memory (Abdiel, Matt, Chris)
- Fix RPS (Chris)
- DP MST fix (Lyude)
- Display FBC fixes (Jose, RK)
- debugfs cleanup (Tvrtko)
- More convertion towards drm_debive based loggin (Wambui, Ram)
- Avoid potential buffer overflow (Takashi)
- Ice Lake and Elkhart Lake workarounds (Matt Roper)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl5sIZ0ACgkQ+mJfZA7r
E8o1LQf+L/Vpm46QQGEyzHINf/gTQvFvumuNAX352vEHaKUgLtTuI7xfpd0c83G1
5VI+L0Q/ARvakkgfZuHYInlxc9azkcPF1wXb3bLqkoiJ15ydwx5GWjVpZ8uFT+fG
xzaHBqhqUcvw/kXI1Cy5kIDAlFO9rKLsoLS2qQF9BsYHyxa52ok9/hW+lM7C+vfR
aYvEr7aAK0o06mqgwc3DHXGuzaS1S9kxtvj9ZkHNsD9iwD4rrEIvW3BPuDqEVkGq
TkKfThhzJp2FDjXkgCQbLm2BQmxBS0aihwNsQ/lDUUAxcFiuRYwMSoT63vPD1OYI
lgG0BuJkwK7csJIMrnOs/ZAMeKyTQA==
=vrB8
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2020-03-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
On i915 we have a new UAPI to allow userspace to specify CS ring buffer size on
construction (I915_CONTEXT_PARAM_RINGSIZE) and also new sysfs entries exposing
various engine properties
GVT Changes:
VFIO edid getting expanded to all platforms and a big cleanup around attr
group, unused vblank complete, kvmgt, Intel engine and dev_priv usages.
i915 Changes:
- new UAPI to allow userspace to specify CS ring buffer size on construction
(I915_CONTEXT_PARAM_RINGSIZE) - (Chris)
- New sysfs entries exposing various engine properties (Chris)
- Tiger Lake is out of require_force_probe protection (Jose)
- Changes in many places around active requests, reset and heartbeat (Chris)
- Stop assigning drm-dev_private pointer (Jani)
- Many code refactor in many places, including intel_modeset_init,
increasing use of intel_uncore_*, vgpu, and gvt stuff (Jani)
- Fixes around display pipe iterators (Anshuman)
- Tigerlake enabling work (Matt Ropper, Matt Atwood, Ville, Lucas, Daniele,
Jose, Anusha, Vivek, Swathi, Caz. Kai)
- Code clean-up like reducing use of drm/i915_drv.h, removing unused
registers, removing garbage warns, and some other code polishing (Jani, Lucas,
Ville)
- Selftests fixes, improvements and additions (Chris, Dan, Aditya, Matt Auld)
- Fix plane possible_crtcs bit mask (Anshuman)
- Fixes and cleanup on GLK pre production identification and w/a (Ville)
- Fix display orientation on few cases (Hans, Ville)
- dbuf clean-up and improvements for slice arrays handling (Ville)
- Improvement around min cdclk calculation (Stanislav)
- Fixes and refactor around display PLLs (Imre)
- Other execlists and perf fixes (Chris)
- Documentation fixes (Jani, Chris)
- Fix build issue (Anshuman)
- Many more fixes around the locking mechanisms (Chris)
- Other fixes and debugability info around preemption (Chris, Tvrtko)
- Add mechanism to submit a context WA on ring submission (Mika)
- Clear all Eu/L3 resitual context (Prathap)
- More changes around local memory (Abdiel, Matt, Chris)
- Fix RPS (Chris)
- DP MST fix (Lyude)
- Display FBC fixes (Jose, RK)
- debugfs cleanup (Tvrtko)
- More convertion towards drm_debive based loggin (Wambui, Ram)
- Avoid potential buffer overflow (Takashi)
- Ice Lake and Elkhart Lake workarounds (Matt Roper)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314001535.GA2969344@intel.com
This contains some minor cleanups, nothing too exciting.
-----BEGIN PGP SIGNATURE-----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=xg7O
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.7-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v5.7-rc1
This contains some minor cleanups, nothing too exciting.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313171042.2924890-1-thierry.reding@gmail.com
fix typo for vcn2.5/jpeg2.5 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix typo for vcn2/jpeg2 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix typo for vcn1 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
htotal*vtotal*vrefresh ~= clock. So just use say "clock" when we mean it.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The function name mentioned in the documentational comments mismatches
the actual one. The mismatch may make trouble for automatic documentation
generation. One of the erronous name has seen to be misused
and fixed in commit bc5ab2d29b ("drm/amdgpu: fix typo in function
sdma_v4_0_page_resume").
There is apparently no functional change in the patch.
Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
According to the vbt provided by GVT-g, the display output type should
be display port, instead of DVI. Currently, GVT-g display model only
supports display port emulation, not DVI or HDMI. This patch fixes this
by telling guest i915 the right output type supported by GVT-g.
v3: make port_b and port_c use dp type connector too. (Zhenyu)
v2: refine the commit message. (Zhenyu)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200317093615.10538-1-tina.zhang@intel.com
Those regs are added in order to slove the following complains:
[70811.201818] gvt: vgpu(1) Invalid FORCE_NONPRIV write 2341 at offset 24d8
[70811.201825] gvt: vgpu(1) Invalid FORCE_NONPRIV write 2351 at offset 24dc
[70811.201831] gvt: vgpu(1) Invalid FORCE_NONPRIV write 10000d82 at offset 24e0
[70811.201837] gvt: vgpu(1) Invalid FORCE_NONPRIV write 10064844 at offset 24e4
So solve them by adding the required regs to the whitelist.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200302083130.17831-1-tina.zhang@intel.com
VCN HW doesn't support dynamic load balance on multiple instances
for a context. This patch initializes VNC entities with only one
drm_gpu_scheduler picked by drm_sched_pick_best(). Picking a
drm_gpu_scheduler using drm_sched_pick_best() ensures that we
do load balance among multiple contexts but not among multiple
jobs in a context.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove drm_sched_entity_get_free_sched() and use the logic of picking
the least loaded drm scheduler from a drm scheduler list to implement
drm_sched_pick_best(). This patch also exports drm_sched_pick_best() so
that it can be utilized by other drm drivers.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It needs to revert this patch to avoid amdgpu_test compute hang problem
on picasso.
This reverts commit 56822db194.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Puts the i2c adapter in common place for sharing by RAS
and upcoming data read from FRU EEPROM feature.
v2:
Move i2c adapter to amdgpu_pm and rename it.
v3: Move i2c adapter init to ASIC specific code and get rid
of the switch case in amdgpu_device
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Job fence on page table should be a shared one, so add it to the root
page talbe bo resv.
last_delayed field is not needed anymore. so remove it.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix switch-case indentation in amdgpu_ctx_init_entity()
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
what changed:
1)provide new implementation interface for the rlcg access path
2)put SQ_CMD/SQ_IND_INDEX to GFX9 RLCG path to let debugfs's reg_op
function can access reg that need RLCG path help
now even debugfs's reg_op can used to dump wave.
tested-by: Monk Liu <monk.liu@amd.com>
tested-by: Zhou pengju <pengju.zhou@amd.com>
Signed-off-by: Zhou pengju <pengju.zhou@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The bspec documents multiple MCR ranges; make sure they're all captured
by the driver.
Bspec: 13991, 52079
Fixes: 592a7c5e08 ("drm/i915: Extend non readable mcr range")
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-2-matthew.d.roper@intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
(cherry picked from commit 415d126997)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
