Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713123913.34205-1-grandmaster@al2klimov.de
AM65x PG1 has a HW issue with YUV pixel formats, resulting in wrong
colors on the screen. This issue is fixed in PG2 hardware.
The driver currently has code to hide YUV pixel formats from the
userspace. To support PG2, we would need to add code to detect the SoC
version and hide the YUV formats based on that.
However, as PG1 will be phased out and PG2 will be the main platform, a
much simpler solution is just to drop the code in question. The downside
is that the users will be able to use YUV formats on PG1, getting wrong
colors on the screen. On the other hand, that may also be a plus, as the
same applications will now work on PG1 and PG2, even if the colors are
wrong on PG1.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429121022.3871-1-tomi.valkeinen@ti.com
Reviewed-by: Jyri Sarha <jsarha@ti.com>
There is no need to have the 'const struct dispc_csc_coef *coef'
variable static since new value always be assigned before use it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Tested-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227065057.92766-1-yuehaibing@huawei.com
The old implementation of placing planes on the CRTC while configuring
the planes was naive and relied on the order in which the planes were
configured, enabled, and disabled. The situation where a plane's zpos
was changed on the fly was completely broken. The usual symptoms of
this problem was scrambled display and a flood of sync lost errors,
when a plane was active in two layers at the same time, or a missing
plane, in case when a layer was accidentally disabled.
The rewrite takes a more straight forward approach when HW is
concerned. The plane positioning registers are in the CRTC (or
actually OVR) register space and it is more natural to configure them
in a one go when configuring the CRTC. To do this we need make sure we
have all the planes on the updated CRTCs in the new atomic state. The
untouched planes on CRTCs that need plane position update are added to
the atomic state in tidss_atomic_check().
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227120052.23168-1-jsarha@ti.com
This patch adds a new DRM driver for Texas Instruments DSS IPs used on
Texas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP is
a major change to the older DSS IP versions, which are supported by
the omapdrm driver. While on higher level the Keystone DSS resembles
the older DSS versions, the registers are completely different and the
internal pipelines differ a lot.
DSS IP found on K2G is an "ultra-light" version, and has only a single
plane and a single output. The K3 DSS IPs are found on AM65x and J721E
SoCs. AM65x DSS has two video ports, one full video plane, and another
"lite" plane without scaling support. J721E has 4 video ports, 2 video
planes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS)
output.
Version history:
v2: - rebased on top of drm-next-2019-11-27
- sort all include lines in all files
- remove all include <drm/drmP.h>
- remove select "select VIDEOMODE_HELPERS"
- call dispc_vp_setup() later in tidss_crtc_atomic_flush() (there is no
to call it in new modeset case as it is also called in vp_enable())
- change probe sequence and drm_device allocation (follow example in
drm_drv.c)
- use __maybe_unused instead of #ifdef for pm functions
- remove "struct drm_fbdev_cma *fbdev;" from driver data
- check panel connector type before connecting it
v3: no change
v4: no change
v5: - remove fifo underflow irq handling, it is not an error and
it should be used for debug purposes only
- memory tuning, prefetch plane fifo up to high-threshold value to
minimize possibility of underflows.
v6: - Check CTM and gamma support from dispc_features when creating crtc
- Implement CTM support for k2g and fix k3 CTM implementation
- Remove gamma property persistence and always write color properties
in a new modeset
v7: - Fix checkpatch.pl --strict issues
- Rebase on top of drm-misc-next-2020-01-10
v8: - Remove idle debug prints from dispc_init()
- Add Reviewed-by: Benoit Parrot <bparrot@ti.com>
v9: - Rename dispc_write_irqenable() to dispc_set_irqenable() to avoid
conflict exported omapfb function with same name
- Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/925fbfad58ff828e8e07fdff7073a0ee65750c3d.1580129724.git.jsarha@ti.com
