PMS405 also features PON block, so add PON and PWRKEY nodes
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
We can use BAM DAM for serial UART data transfers, so add it
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the BAM DMA instance found in BLSP1 node of the QCS404
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
RNG hardware in QCS404 features (Execution Environment) EE for
HLOS to use, add the node for prng-ee for QCS404.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the TrustZone based remoteproc nodes and their glink edges for
adsp, cdsp and wcss. Enable them for EVB common DTS.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
RTC is found on PMIC PMS405 and is same as other PMIC used, so add the
rtc node with compatible as qcom,pm8941-rtc
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
PMS405 is used in QCS405-EVB so include that with SPMI nodes
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the sdcc1 node and enable it for the QCS404-EVB.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the QCS404 TLMM pinctrl node with its three tiles.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the smp2p-adsp, smp2p-cdsp and smp2p-wcss nodes found in QCS404.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the RPM regulators found in PMS405 which is used in qcs404-evb
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add RPM GLINK node and the RPM message ram, hwspinlock, APCS apps global
and smem nodes it depends on.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the reserved memory regions in QCS404
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
QCS404 has two EVBs, EVB-1000 and EVB-4000. These boards are mostly
similar with few differences in the peripherals used.
So use a common qcs404-evb.dtsi which contains the common parts and use
qcs404-evb-1000.dts and qcs404-evb-4000.dts for diffs
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add base dts files for QCS404 chipset along with cpu, timer,
gcc and uart2 nodes.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Switch to updated coresight bindings for hw ports
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The smd and smp2p drivers now support accessing the APCS GLOBAL IPC
register through the mailbox framework, so migrate the msm8996 dts to
use this and remove the syscon based APCS node.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The thermal zone uses spmi-temp-alarm as sensor, the trip points
correspond to the PMIC thermal stages 1 and 2. The critical trip
point at 125°C disables the partial PMIC shutdown at stage 2.
Without an IIO input the sensor only reports a limited number of
temperatures:
- 37°C for temperatures below 105°C
- 107°C for temperatures >= 105°C and < 125°C
- 127°C for temperatures >= 125°C
(the numbers correspond to a stage 1 threshold of 105°C)
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This adds the spmi-temp-alarm node to pm8998 based on the examples in the
bindings.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This adds the display clock controller node to sdm845 based on the
examples in the bindings.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the SMP2P nodes for the remoteproc states for adsp, cdsp and slpi.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Set the various nodes to "okay" and hook up the regulators.
NOTE: For now the main USB port (the one that goes out the Type C
connector) is forced to host. Eventually someone will need to get the
Type C detection hooked up and get this all integrated with the
PMI8998 PMIC. The reason for forcing to "host" in the meantime is
that this will leave us with one "host" and one "peripheral" port.
In order for host mode this to work, we assume that the bootloader
left things configured enough for us. Apparently the magic for that
is is to do these writes on pmi8998:
- pm_comm_write_byte(2, 0x1153, 0x2C, 0);
- pm_comm_write_byte(2, 0x1152, 0x07, 0);
- pm_comm_write_byte(2, 0x1140, 0x00, 0);
- pm_comm_write_byte(2, 0x1140, 0x01, 0);
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add regulator devices for PMIC regulators managed via VRM and XOB
RPMh accelerators.
A few notes here:
- Regulators are added directly to the board file. While it's true
that this will mean a bunch of copy/pasting for other boards that
are very similar, this is probably the right call since boards
could make changes to the way these regulators are hooked up and
trying to find a way to avoid duplication will result in some
confusing node overrides.
- Regulators that are hooked up to supply pins on the SoC are given
an alias matching the name of that pin (pin name comes from the
Qualcomm SoC "device specification" doc).
- Other regulator labels are based on the schematic. If there is
more than one logical name on the schematic for the same rail the
secondary names are also listed and should be referred to as
appropriate.
- Regulators all default to HPM mode w/ no ability to switch modes.
Future patches can switch things to LPM and possibly add
dynamic load switching if we have determined there's a benefit.
This should only be done for rails where we'll actually be able
to take advantage of the lower power modes so we don't need to
churn with lots of patches adding regulator_set_load() calls
to drivers.
NOTE: This patch is loosely based on one originally shared to me by
David Collins.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This adds nodes for USB and related PHYs.
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
[dianders: reworked quite a bit]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds the node to support AOSS reset driver on
SDM845
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
[bjorn: Updated addresses to match the binding that was merged]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
DTS board files should always specify model and compatible.
All DTS board files that includes msm8996.dtsi
already specifies model and compatible, and will thus
override the model and compatible in msm8996.dtsi.
Drop model from msm8916.dtsi, since it is only a source of confusion.
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
DTS board files should always specify model and compatible.
All DTS board files that includes msm8916.dtsi
already specifies model and compatible, and will thus
override the model and compatible in msm8916.dtsi.
Drop model and compatible from msm8916.dtsi,
since they are only a source of confusion.
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add qcom,apq8096 to compatible string.
This compatible is defined in Documentation/devicetree/bindings/arm/qcom.txt
and is needed for e.g. drivers/cpufreq/qcom-cpufreq-kryo.c to be probed
correctly (and for drivers/cpufreq/cpufreq-dt-platdev.c to work properly).
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add pon, coincell and rtc to the first pm8998 sid.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the adsp, modem and slpi smp2p nodes to msm8998.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the firmware and scm nodes for msm8998
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add new dtsi file for the PMI8998, with its gpios and include all three
PMICs in the MSM8998 MTP dts.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the two tsens instances and the thermal zones for CPUs, GPUs,
battery and skin sensors.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add nodes for RPM communication for MSM8998 and the regulator nodes for
the MTP.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add initial device tree support for the Qualcomm MSM8998 SoC and
MTP8998 evaluation board.
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Imran Khan <kimran@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
[bjorn: Restructured, removed its node and moved to SPDX headers]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This adds the adc node to pm8998 based on the examples in the
bindings. It also fixes the order of the included headers.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Resin is board specific, so add the resin node in apq8096-db820c dtsi
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Resin is board specific so add the resin node in apq8016-sbc dtsi
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add PON and pwrkey as child nodes for PON device. Also
add additional properties for pwrkey i.e., linux,code
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
SDM845 has two tsens blocks, one with 13 sensors and the other with 8
sensors. It uses version 2 of the TSENS IP, so use the fallback property to
allow more common code.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
We also split up the regmap address space into two, for the TM and SROT
registers. This was required to deal with different address offsets for the
TM and SROT registers across different SoC families.
8996 has two TSENS IP blocks, initialise the second one too.
Since tsens-common.c/init_common() currently only registers one address
space, the order is important (TM before SROT). This is OK since the code
doesn't really use the SROT functionality yet.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
* Add support for PM8005/PM8998 and related nodes
* Add/fix nodes on SDM845 for I2c, SPI, UART, and RPMH
* Fix BT LED trigger on DB410c
* Drop legacy clock names on MSM8916
* Add gpio line names on DB820c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DQjU
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm ARM64 Updates for v4.19
* Add support for PM8005/PM8998 and related nodes
* Add/fix nodes on SDM845 for I2c, SPI, UART, and RPMH
* Fix BT LED trigger on DB410c
* Drop legacy clock names on MSM8916
* Add gpio line names on DB820c
* tag 'qcom-arm64-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: qcom: db410c: Fix Bluetooth LED trigger
arm64: dts: sdm845: Default qupv3_id_0 as "disabled" like _id_1
arm64: dts: msm8916: drop legacy suffix for clocks used by MSM DRM driver
arm64: dts: qcom: db820c: Add gpio-line-names property
arm64: dts: sdm845: Add rpmh-clk node
arm64: dts: sdm845: Add rpmh-rsc node
arm64: dts: qcom: sdm845: Enable debug UART and I2C10 on sdm845-mtp
arm64: dts: qcom: sdm845: Add I2C, SPI, and UART9 nodes
arm64: dts: qcom: Add pm8005 and pm8998 support
arm64: dts: qcom: Add pmu node to sdm845
Signed-off-by: Olof Johansson <olof@lixom.net>
Current LED trigger, 'bt', is not known/used by any existing driver.
Fix this by renaming it to 'bluetooth-power' trigger which is
controlled by the Bluetooth subsystem.
Fixes: 9943230c88 ("arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
