We don't need to explicitly invoke the archheaders target because of
the dependency on __headers in the Makefile.
Reported-and-tested-by: Michal Marek <mmarek@suse.cz>
Link: http://lkml.kernel.org/r/4ECA8991.20302@suse.cz
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This patch adds the necessary support in file2alias.c to define
suitable aliases based on the amba_id table in AMBA driver modules.
This should be sufficient to allow such modules to be auto-loaded
via udev. The AMBA bus driver's uevent hotplug code is also
modified to pass an approriate MODALIAS string in the event.
For simplicity, the AMBA ID is treated an an opaque 32-bit numeber.
Module alises use patterns as appropriate to describe the value-
mask pairs described in the driver's amba_id list.
The proposed alias format is (extended regex):
^amba:d(HEX){8}$
Where HEX is a single upper-case HEX digit or a pattern (? or []
expression) matching a single upper-case HEX digit, as expected by
udev.
"d" is short for "device", following existing alias naming
conventions for other device types. This adds some flexibility for
unambiguously extending the alias format in the future by adding
additional leading and trailing fields, if this turns out to be
necessary.
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Use the new arch/x86/syscalls/syscall_32.tbl file as source instead of
arch/x86/include/asm/unistd_32.h.
Cc: Michal Marek <mmarek@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Add support for an "archheaders" target. This target can generate
files that need to be installed for user space by "make
headers_install" or "make headers_install_all".
In order to support "make headers_install_all", it must be able to run
without the tree having to be configured first.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Generated asm headers are supposed to live in
arch/*/include/generated/asm, but objhdr-y expect them to live in the
same directory they are generated in. Instead of trying to cut that
particular Gordian knot, introduce genhdr-y that takes this into
account; the sole user of objhdr-y, linux/version.h, should be
migrated over at some later date.
Suggested-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
It takes a while to find the macro-magically defined Page*()
functions defined in include/linux/page-flags.h if you're new to
the kernel. Add some magic to the tags script to transform these
macros into the actual functions they are, so that tag jumping in
the mm code is a bit easier.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
script/checkpatch.pl: warn about deprecated use of EXTRA_{A,C,CPP,LD}FLAGS
tags, powerpc: Update tags.sh to support _GLOBAL symbols
scripts: add extract-vmlinux
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts/kconfig/nconf: add KEY_HOME / KEY_END for dialog_inputbox
scripts/kconfig/nconf: fix editing long strings
scripts/kconfig/nconf: dynamically alloc dialog_input_result
scripts/kconfig/nconf: fix memmove's length arg
scripts/kconfig/nconf: fix typo: unknow => unknown
kconfig: fix set but not used variables
kconfig: handle SIGINT in menuconfig
kconfig: fix __enabled_ macros definition for invisible and un-selected symbols
kconfig: factor code in menu_get_ext_help()
kbuild: Fix help text not displayed in choice option.
kconfig/nconf: nuke unreferenced `nohelp_text'
kconfig/streamline_config.pl: merge local{mod,yes}config
kconfig/streamline_config.pl: use options to determine operating mode
kconfig/streamline_config.pl: directly access LSMOD from the environment
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
Kbuild: append missing-syscalls to the default target list
genksyms: Regenerate lexer and parser
genksyms: Do not expand internal types
genksyms: Minor parser cleanup
Makefile: remove a duplicated line
fixdep: fix extraneous dependencies
scripts/Makefile.build: do not reference EXTRA_CFLAGS as CFLAGS replacement
kbuild: prevent make from deleting _shipped files
kbuild: Do not delete empty files in make distclean
Use of the GPL or a compatible licence doesn't necessarily make the code
any good. We already consider staging modules to be suspect, and this
should also be true for out-of-tree modules which may receive very
little review.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reviewed-by: Dave Jones <davej@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (patched oops-tracing.txt)
Some find using utf-8 in commit logs inappropriate.
Some patch commit logs contain unintended utf-8 characters when doing
things like copy/pasting compilation output.
Look for the start of any commit log by skipping initial lines that look
like email headers and "From: " lines.
Stop looking for utf-8 at the first signature line.
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark obsolete/deprecated strict_strto<foo> and simple_strto<foo> functions
and macros as obsolete.
Update checkpatch to warn about their use.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1519 commits)
staging: et131x: Remove redundant check and return statement
staging: et131x: Mainly whitespace changes to appease checkpatch
staging: et131x: Remove last of the forward declarations
staging: et131x: Remove even more forward declarations
staging: et131x: Remove yet more forward declarations
staging: et131x: Remove more forward declarations
staging: et131x: Remove forward declaration of et131x_adapter_setup
staging: et131x: Remove some forward declarations
staging: et131x: Remove unused rx_ring.recv_packet_pool
staging: et131x: Remove call to find pci pm capability
staging: et131x: Remove redundant et131x_reset_recv() call
staging: et131x: Remove unused rx_ring.recv_buffer_pool
Staging: bcm: Fix three initialization errors in InterfaceDld.c
Staging: bcm: Fix coding style issues in InterfaceDld.c
staging:iio:dac: Add AD5360 driver
staging:iio:trigger:bfin-timer: Fix compile error
Staging: vt6655: add some range checks before memcpy()
Staging: vt6655: whitespace fixes to iotcl.c
Staging: vt6656: add some range checks before memcpy()
Staging: vt6656: whitespace cleanups in ioctl.c
...
Fix up conflicts in:
- drivers/{Kconfig,Makefile}, drivers/staging/{Kconfig,Makefile}:
vg driver movement
- drivers/staging/brcm80211/brcmfmac/{dhd_linux.c,mac80211_if.c}:
driver removal vs now stale changes
- drivers/staging/rtl8192e/r8192E_core.c:
driver removal vs now stale changes
- drivers/staging/et131x/et131*:
driver consolidation into one file, tried to do fixups
Consider structures, unions and enums defined in the source file as
internal and do not expand them. This way, changes to e.g. struct
serial_private in drivers/tty/serial/8250_pci.c will not affect the
checksum of the pciserial_* exports.
This is a resend from the original, changing the title from PATCH to
RFC(since this is a review for commit, and I should have put that the first go around).
and also removing some of the commit's with ia64 and bash since it is significant.
let me know if I might have missed anything etc..
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
to make it easier to locate begin/end when editing long strings;
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Acked By: Nir Tzachar <nir.tzachar@gmail.com>
The original dialog_inputbox doesn't work with longer than prompt_width
strings, here fixed it in this way:
1) add variable cursor_form_win to record cursor of form_win,
keep its value always between [0, prompt_width-1];
reuse the original cursor_position as cursor of the string result,
use (cursor_position-cursor_form_win) as begin offset to show part of
the string in form_win;
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Arnaud Lacombe <lacombar@gmail.com>
Cc: Nir Tzachar <nir.tzachar@gmail.com>
To support unlimited length string config items;
No check for realloc return value keeps code simple, and to be
consistent with other existing unchecked malloc in kconfig.
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
In case KEY_BACKSPACE / KEY_DC to delete a char, it memmove only
(len-cursor_position+1) bytes;
the default case is to insert a char, it should also memmove exactly
(len-cursor_position+1) bytes;
the original use of (len+1) is wrong and may access following memory
that doesn't belong to result, may cause SegFault in theory;
case KEY_BACKSPACE:
if (cursor_position > 0) {
memmove(&result[cursor_position-1],
&result[cursor_position],
len-cursor_position+1);
cursor_position--;
}
break;
case KEY_DC:
if (cursor_position >= 0 && cursor_position < len) {
memmove(&result[cursor_position],
&result[cursor_position+1],
len-cursor_position+1);
}
break;
default:
if ((isgraph(res) || isspace(res)) &&
len-2 < result_len) {
/* insert the char at the proper position */
memmove(&result[cursor_position+1],
&result[cursor_position],
len-cursor_position+1);
result[cursor_position] = res;
cursor_position++;
}
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Acked-by: Nir Tzachar <nir.tzachar@gmail.com>
The introduction of include/linux/kconfig.h created 3 extraneous
dependencies:
include/config/.h
include/config/h.h
include/config/foo.h
Fix this by excluding kconfig.h from fixdep calculations.
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Usage of these flags has been deprecated for nearly 4 years by:
commit f77bf01425
Author: Sam Ravnborg <sam@neptun.(none)>
Date: Mon Oct 15 22:25:06 2007 +0200
kbuild: introduce ccflags-y, asflags-y and ldflags-y
Moreover, these flags (at least EXTRA_CFLAGS) have been documented for command
line use. By default, gmake(1) do not override command line setting, so this is
likely to result in build failure or unexpected behavior.
Warn about their introduction in Makefile or Kbuild files.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Usage of these flags has been deprecated for nearly 4 years by:
commit f77bf01425
Author: Sam Ravnborg <sam@neptun.(none)>
Date: Mon Oct 15 22:25:06 2007 +0200
kbuild: introduce ccflags-y, asflags-y and ldflags-y
Moreover, these flags (at least EXTRA_CFLAGS) have been documented for
command line use. By default, gmake(1) do not override command line
setting, so this is likely to result in build failure or unexpected
behavior.
Do not advertise for its usage.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
commit 7373f4f (kbuild: add implicit rules for parser generation)
created a implicit rule chain (%.c: %.c_shipped: %.y).
Make considers the _shipped files to be intermediate files which
causes them to be deleted if they didn't exist before make was run.
Mark the _shipped files PRECIOUS to prevent make from deleting them.
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Acked-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
On PowerPC we use _GLOBAL throughout the assembly to define symbols, but
currently these symbols are missing from the tags generated with
ARCH=powerpc make tags. This patch modifies the tags.sh script to
recognise _GLOBAL(.*) so that these symbols will be in the tags.
This is almost (but not quite) PowerPC specific and this change should
not affect anyone else:
$ git grep -E '^_GLOBAL\(([^)]*)\).*' |sed 's/^\([^/]*\/[^/]*\)\/.*$/\1/'|uniq -c
627 arch/powerpc
2 arch/um
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This script can be used to extract vmlinux from a compressed
kernel image (bzImage, etc..). It's inspired from (a subset of)
extract-ikconfig.
It's something a lot of people have been looking for (mainly
people with xen < 4 that doesn't support bzImages at all).
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Some variables were being set but never used, which was triggering
warnings in GCC >= 4.6.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
I recently got bitten in the ass when pressing Ctrl-C and lost all my current
configuration changes. This patch captures SIGINT and allows the user to save
any changes.
Some code refactoring was made in order to handle the exit behavior.
Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
__enabled_<sym-name> are only generated on visible or selected entries, do not
reflect the purpose of its introduction.
Fix this by always generating these entries for named symbol.
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
The test for bad usage of min_t() and max_t() is missing the --ignore
type. Add it.
Signed-off-by: Hui Zhu <teawater@gmail.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change to new git tree -
(git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git).
Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When I added the driver_data field to hv_vmbus_device_id, I forgot to
take into the account how the alias was created, so it would append the
kernel pointer to the end of the alias, which is not correct.
This changes how the hv_vmbus_device_id alias is created to proper
account for the driver_data field. As no module yet uses this alias, it
is safe to fix this up at this point in the commit stream.
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Help text under choice menu is never displayed because it does not have
symbol name associated with it, however many kconfigs have help text
under choice, assuming that it will be displayed when user selects help.
for example in Kconfig if we have:
choice
prompt "Choice"
---help---
HELP TEXT ...
config A
bool "A"
config B
bool "B"
endchoice
Without this patch "HELP TEXT" is not displayed when user selects help
option when "Choice" is highlighted from menuconfig or xconfig or
gconfig.
This patch changes the logic in menu_get_ext_help to display help for
cases which dont have symbol names like choice.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Reviewed-by: Stuart Menefy <stuart.menefy@st.com>
Reviewed-by: Arnaud Lacombe <lacombar@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Michal Marek <mmarek@suse.cz>
After commit 5416857867, nohelp_text' is no
longer referenced, nuke it.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The two targets `localmodconfig' and `localyesconfig' only differs from the
sed(1) ran on the result of `streamline_config.pl' to convert symbols set to
`modules' to `yes'. This conversion can be made directly from the perl script,
and thus avoid duplicating the command to generate the configuration.
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
The options introduced are --localmodconfig (default) and --localyesconfig.
They match the Makefile target behavior.
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits)
kconfig: Introduce IS_ENABLED(), IS_BUILTIN() and IS_MODULE()
xconfig: Abort close if configuration cannot be saved
kconfig: fix missing "0x" prefix from S_HEX symbol in autoconf.h
kconfig/nconf: remove useless conditionnal
kconfig/nconf: prevent segfault on empty menu
kconfig/nconf: use the generic menu_get_ext_help()
nconfig: Avoid Wunused-but-set warning
kconfig/conf: mark xfgets() private
kconfig: remove pending prototypes for kconfig_load()
kconfig/conf: add command line options' description
kconfig/conf: reduce the scope of `defconfig_file'
kconfig: use calloc() for expr allocation
kconfig: introduce specialized printer
kconfig: do not overwrite symbol direct dependency in assignment
kconfig/gconf: silent missing prototype warnings
kconfig/gconf: kill deadcode
kconfig: nuke LKC_DIRECT_LINK cruft
kconfig: nuke reference to SWIG
kconfig: add missing <stdlib.h> inclusion
kconfig: add missing <ctype.h> inclusion
...
Fix up conflicts in scripts/kconfig/Makefile
Replace the config_is_*() macros with a variant that allows for grepping
for usage of CONFIG_* options in the code. Usage:
if (IS_ENABLED(CONFIG_NUMA))
or
#if IS_ENABLED(CONFIG_NUMA)
The IS_ENABLED() macro evaluates to 1 if the argument is set (to either 'y'
or 'm'), IS_BUILTIN() tests if the option is 'y' and IS_MODULE() test if
the option is 'm'. Only boolean and tristate options are supported.
Reviewed-by: Arnaud Lacombe <lacombar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* Merge akpm patch series: (122 commits)
drivers/connector/cn_proc.c: remove unused local
Documentation/SubmitChecklist: add RCU debug config options
reiserfs: use hweight_long()
reiserfs: use proper little-endian bitops
pnpacpi: register disabled resources
drivers/rtc/rtc-tegra.c: properly initialize spinlock
drivers/rtc/rtc-twl.c: check return value of twl_rtc_write_u8() in twl_rtc_set_time()
drivers/rtc: add support for Qualcomm PMIC8xxx RTC
drivers/rtc/rtc-s3c.c: support clock gating
drivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200
init: skip calibration delay if previously done
misc/eeprom: add eeprom access driver for digsy_mtc board
misc/eeprom: add driver for microwire 93xx46 EEPROMs
checkpatch.pl: update $logFunctions
checkpatch: make utf-8 test --strict
checkpatch.pl: add ability to ignore various messages
checkpatch: add a "prefer __aligned" check
checkpatch: validate signature styles and To: and Cc: lines
checkpatch: add __rcu as a sparse modifier
checkpatch: suggest using min_t or max_t
...
Did this as a merge because of (trivial) conflicts in
- Documentation/feature-removal-schedule.txt
- arch/xtensa/include/asm/uaccess.h
that were just easier to fix up in the merge than in the patch series.
Previous behavior allowed only alphabetic prefixes like pr_info to exceed
the 80 column line length limit.
ath6kl wants to add a digit into the prefix, so allow numbers as well as
digits in the <prefix>_<level> printks.
<prefix>_<level>_ratelimited and <prefix>_<level>_once and WARN_RATELIMIT
and WARN_ONCE may now exceed 80 cols.
Add missing <prefix>_printk type for completeness.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some patches are sent in using ISO-8859 or even Windows codepage 1252.
Make checkpatch accept these by default and only emit the "Invalid UTF-8"
message when using --strict.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some users would like the ability to not emit some of the messages that
checkpatch produces. This can make it easier to use checkpatch in other
projects and integrate into scm hook scripts.
Add command line option to "--ignore" various message types. Add option
--show-types to emit the "type" of each message. Categorize all ERROR,
WARN and CHK messages with types.
Add optional .checkpatch.conf file to store default options.
3 paths are searched for .checkpatch.conf
. customized per-tree configurations
$HOME user global configuration when per-tree configs don't exist
./scripts lk defaults to override script
The .conf file can contain any valid command-line argument and
the contents are prepended to any additional command line arguments.
Multiple lines may be used, blank lines are ignored, # is a comment.
Update "false positive" output for readability.
Update version to 0.32
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prefer the use of __aligned(size) over __attribute__((__aligned___(size)))
Link: http://lkml.kernel.org/r/20110609094526.1571774c.akpm@linux-foundation.org
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signatures have many forms and can sometimes cause problems if not in the
correct format when using git send-email or quilt.
Try to verify the signature tags and email addresses to use the generally
accepted "Signed-off-by: Full Name <email@domain.tld>" form.
Original idea by Anish Kumar <anish198519851985@gmail.com>
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Anish Kumar <anish198519851985@gmail.com>
Cc: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix "need consistent spacing around '*'" error after a __rcu sparse
annotation which was caused by the missing __rcu entry in the
checkpatch.pl internal list of sparse keywords.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A common issue with min() or max() is using a cast on one or both of the
arguments when using min_t/max_t could be better.
Add cast detection to uses of min/max and suggest an appropriate use of
min_t or max_t instead.
Caveat: This only works for min() or max() on a single line.
It does not find min() or max() split across multiple lines.
This does find:
min((u32)foo, bar);
But it does not find:
max((unsigned long)foo,
bar);
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Entries that used formats other than "Proper Name <commit@email.xx>"
were not parsed properly.
Try to improve the parsing so that the entries in the forms of:
Proper Name <proper@email.xx> <commit@email.xx>
and
Proper Name <proper@email.xx> Commit Name <commit@email.xx>
are transformed correctly.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Florian Mickler <florian@mickler.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
genksyms: Use same type in loop comparison
kbuild: silence generated makefile message
kernel: prevent unnecessary rebuilding due to config_data.gz
headers_install: fix __packed in exported kernel headers
dtc: regen parser
dtc: migrate parser to implicit rules
kconfig: regen parser
kconfig: migrate parser to implicit rules
kconfig/zconf.l: do not ask to generate backup
kconfig: kill no longer needed reference to YYDEBUG
kconfig: constify `kconf_id_lookup'
genksym: regen parser
genksyms: migrate parser to implicit rules
genksyms: drop -Wno-uninitialized from HOSTCFLAGS_parse.tab.o
genksyms: pass hash and lookup functions name and target language though the input file
kbuild: simplify the %_shipped rule
kbuild: add implicit rules for parser generation
kbuild: add `baseprereq'
kbuild: Fix reference to vermagic.h
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
package: Makefile: fix perf target bug
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
gitignore: ignore debian build directory
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
fs: Merge split strings
treewide: fix potentially dangerous trailing ';' in #defined values/expressions
uwb: Fix misspelling of neighbourhood in comment
net, netfilter: Remove redundant goto in ebt_ulog_packet
trivial: don't touch files that are removed in the staging tree
lib/vsprintf: replace link to Draft by final RFC number
doc: Kconfig: `to be' -> `be'
doc: Kconfig: Typo: square -> squared
doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
drivers/net: static should be at beginning of declaration
drivers/media: static should be at beginning of declaration
drivers/i2c: static should be at beginning of declaration
XTENSA: static should be at beginning of declaration
SH: static should be at beginning of declaration
MIPS: static should be at beginning of declaration
ARM: static should be at beginning of declaration
rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
Update my e-mail address
PCIe ASPM: forcedly -> forcibly
gma500: push through device driver tree
...
Fix up trivial conflicts:
- arch/arm/mach-ep93xx/dma-m2p.c (deleted)
- drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
- drivers/net/r8169.c (just context changes)
Give the user an opportunity to fix the error or save the configuration
under a different path.
Reported-by: Hiromu Yakura <hiromu1996@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The ARRAY_SIZE macro in scripts/genksyms/genksyms.c returns a value of
type size_t. That value is being compared to a variable of type int in
a loop in read_node(). Change the int variable to size_t type as well,
so we don't do signed vs unsigned type comparisons with all the
potential promotion/sign extension trouble that can cause (also
silences compiler warnings at high levels of warnings).
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The commit f02e8a6 sorts symbols placing each of them in its own elf section.
The sorting and merging into the canonical sections are done by the linker.
Unfortunately modpost to generate Module.symvers file parses vmlinux
(already linked) and all modules object files (which aren't linked yet).
These aren't sanitized by the linker yet. That breaks modpost that can't
detect license properly for modules. This patch makes modpost aware of
the new exported symbols structure.
Thanks to Arnaud Lacombe <lacombar@gmail.com> and Anders Kaseorg
<andersk@ksplice.com> for providing useful suggestions about code.
This work was supported by a hardware donation from the CE Linux Forum.
Reported-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Alessio Igor Bogani <abogani@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This patch silences the "make -C /usr/src/git O=/usr/src/git/build/."
message shown when using the generated makefile in KBUILD_OUTDIR.
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The specialized printer for headers (espectially autoconf.h) is missing
fixup code for S_HEX symbol's "0x" prefix. As long as kconfig does not
warn for such missing prefix, this code is needed. Fix this.
In the same time, fix some nits in `header_print_symbol()'.
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Broken-by: Arnaud Lacombe <lacombar@gmail.com>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Reported-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
After the test
if (!submenu || ...)
continue;
the variable `submenu' can _not_ be NULL, so do not test for this
situation.
Cc: Nir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
nconf does not check the validity of the current menu when help is
requested (with either <F2>, '?' or 'h'). This leads to a NULL pointer
dereference when an empty menu is encountered.
The following reduced testcase exposes the problem:
config DEP
bool
menu "FOO"
config BAR
bool "BAR"
depends on DEP
endmenu
Issue will happen when entering menu "FOO" and requesting help.
nconf is the only front-end which do not filter the validity of the
current menu. Such filter can not really happen beforehand as other key
which does not deals with the current menu might be entered by the user,
so just bails out earlier if we encounter an invalid menu.
Cc: Nir Tzachar <nir.tzachar@gmail.com>
Cc: Andrej Gelenberg <andrej.gelenberg@udo.edu>
Reported-by: Andrej Gelenberg <andrej.gelenberg@udo.edu>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
nconf is the only front-end which does not use this helper, but prefer
to copy/paste the code. The test wrt. menu validity added in this
version of the code is bogus anyway as an invalid menu will get
dereferenced a few line below by calling menu_get_prompt().
For now, convert nconf to use menu_get_ext_help(), as do every other
front-end. We will deals with menu validity checks properly in a
separate commit.
Cc: Nir Tzachar <nir.tzachar@gmail.com>
Cc: Andrej Gelenberg <andrej.gelenberg@udo.edu>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
I am seeing Wunused-but-set warning while make nconfig. Looks like
active_menu is not used. Removing it fixes the warning.
Signed-off-by: Raghavendra D Prabhu <rprabhu@wnohang.net>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Let depmod.sh create a temporary directory in /tmp instead of writing to
the build directory as root. The mktemp utility should be available on
any recent system (and there is already scripts/gen_initramfs_list.sh
relying on it).
Reported-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This function has not much reason to be public. In the mean time, convert
declaration from K&R C to ISO C.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Commit 5a6f8d2bd9 removed `kconfig_load()',
however, it missed an hidden prototypes in `lkc.h'. Fix this.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
This variable is not used outside of main() so there is not much reason keeping
it global. Ensure it is initialized as gcc has no way to know that normal
execution path expect only one option switch to be given on the command line
(except when we request help). As a result, we always initialize
`defconfig_file' before using it.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Make conf_write_symbol() grammar agnostic to be able to use it from different
code path. These path pass a printer callback which will print a symbol's name
and its value in different format.
conf_write_symbol()'s job become mostly only to prepare a string for the
printer. This avoid to have to pass specialized flag to generic
functions
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
[mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx
macro)]
Signed-off-by: Michal Marek <mmarek@suse.cz>
Considering the following configuration:
config F
bool "F"
choice AB
bool "AB"
config A
bool "A"
config B
bool "B"
endchoice
if A
config D
bool
default y if F
select E
config E
bool "E"
endif
if B
config D
bool
default y if F
select E
config E
bool "E"
endif
The following configuration:
CONFIG_F=y
CONFIG_A=y
# CONFIG_B is not set
CONFIG_D=y
CONFIG_E=y
emits a spurious warning:
(D) selects E which has unmet direct dependencies (B)
If a symbol appears in two different branch of the tree, it should inherit the
dependency of both parent, not just the last one.
Reported-by: Yann E. Morin <yann.morin.1998@anciens.enib.fr>
Tested-by: Yann E. Morin <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
checkpatch.pl warns about using __attribute__((packed)) in kernel
headers: "__packed is preferred over __attribute__((packed))". If one
follows that advice it could cause problems in the exported header
files, because the outside world doesn't know about this shortcut.
For example busybox will fail to compile:
CC miscutils/ubi_attach_detach.o
In file included from miscutils/ubi_attach_detach.c:27:0:
/usr/include/mtd/ubi-user.h:330:3: error: conflicting types for ‘__packed’
/usr/include/mtd/ubi-user.h:314:3: note: previous declaration of ‘__packed’ was here
...
Fix the problem by substituting __packed with __attribute__((packed)) in
the header_install.pl script.
Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
CC: Joe Perches <joe@perches.com>
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Specify --git-dir when building perf targets to allow out-of-tree
builds using O=<build-dir>.
The shell command in `git archive' had to be modified to allow proper
file name expansion of the files listed in MANIFEST.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The placement of the opening brace "{" after 'if' statements in
scripts/docproc.c is inconsistent. Most are placed on the same line as the 'if'
statement itself as per CodingStyle, but a few are not. This patch cleans up
the inconsistency. We save a few source lines and the file then uses the same
style throughout, which is nice.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Warn about uses of printk_ratelimit() because it uses a global state and
can hide subsequent useful messages.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch removes the assumption of the bootgraph.pl script that the
timing information reported by PRINTK_TIME will contain at least one
entry with a time of less than 100 seconds.
Not all boards correctly reset the system timer and in many cases the
inital times reported by PRINTK_TIME is high. When this occurs the
bootchart.pl script fails to give any useful output.
This patch sets the $firsttime variable to the largest value expected
by PRINTK_TIME
Signed-off-by: Andrew Murray <amurray@mpc-data.co.uk>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
depmod from module-init-tools < 3.13 and the busybox depmod check if the
kernel release starts with <num>.<num>.<num>. To support these versions,
we create a symlink with two numbers prepended.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Renaming hash and lookup functions on the command line would reduces its
genericity. Use the .gperf file to pass this information. Do the same for the
target language.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
This is needed to have make(1) correctly link the implicit rules which
generate the _shipped file from the lexer/parser to the final file.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
On the same model as `basetarget', it represents the filename of first
prerequisite with directory and extension stripped.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
This patch silences a Makefile.asm-generic message
by defining a dummy rule for all.
make -f /usr/src/git/scripts/Makefile.asm-generic \
obj=arch/x86/include/generated/asm
make[1]: Nothing to be done for `all'.
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
As the `gconf' frontend is un-maintained, go the easy way by silencing
the "warning: no previous prototype for '<fn>'" warnings.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
The only call site of renderer_toggled() has been commented out since Apr. 2003,
as per Linus' Linux history repository:
commit e7f67eb3c0570aa50c1cc0707b478a6d93bdc255
Author: Roman Zippel <zippel@linux-m68k.org>
Date: Fri Apr 4 04:18:05 2003 -0800
[PATCH] gconf update
A gconf update by Romain Li<C3><A9>vin <roms@tilp.info>
- fixed bug when double-clicking for changing value.
- expand row when enabling a row with a submenu.
- various bug fixes
As this result in a warning:
scripts/kconfig/gconf.c:891:13: warning: 'renderer_toggled' defined but not used
just nuke that code.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits)
perf: Fix SIGIO handling
perf top: Don't stop if no kernel symtab is found
perf top: Handle kptr_restrict
perf top: Remove unused macro
perf events: initialize fd array to -1 instead of 0
perf tools: Make sure kptr_restrict warnings fit 80 col terms
perf tools: Fix build on older systems
perf symbols: Handle /proc/sys/kernel/kptr_restrict
perf: Remove duplicate headers
ftrace: Add internal recursive checks
tracing: Update btrfs's tracepoints to use u64 interface
tracing: Add __print_symbolic_u64 to avoid warnings on 32bit machine
ftrace: Set ops->flag to enabled even on static function tracing
tracing: Have event with function tracer check error return
ftrace: Have ftrace_startup() return failure code
jump_label: Check entries limit in __jump_label_update
ftrace/recordmcount: Avoid STT_FUNC symbols as base on ARM
scripts/tags.sh: Add magic for trace-events for etags too
scripts/tags.sh: Fix ctags for DEFINE_EVENT()
x86/ftrace: Fix compiler warning in ftrace.c
...
* 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs:
Create Documentation/security/, move LSM-, credentials-, and keys-related files from Documentation/ to Documentation/security/, add Documentation/security/00-INDEX, and update all occurrences of Documentation/<moved_file> to Documentation/security/<moved_file>.
While find_secsym_ndx often finds the unamed local STT_SECTION, if a
section has only one function in it, the ARM toolchain generates the
STT_FUNC symbol before the STT_SECTION, and recordmcount finds this
instead.
This is problematic on ARM because in ARM ELFs, "if a [STT_FUNC] symbol
addresses a Thumb instruction, its value is the address of the
instruction with bit zero set (in a relocatable object, the section
offset with bit zero set)". This leads to incorrect mcount addresses
being recorded.
Fix this by not using STT_FUNC symbols as the base on ARM.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Link: http://lkml.kernel.org/r/1305134631-31617-1-git-send-email-rabin@rab.in
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Seems that Peter Zijlstra treats us emacs users as second class
citizens and the commit:
commit 15664125f7
Author: Peter Zijlstra <peterz@infradead.org>
scripts/tags.sh: Add magic for trace-events
only updated ctags (for vim) and did not do the work to let us
lowly emacs users benefit from such a change.
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The regex to handle DEFINE_EVENT() should not be the same as
the TRACE_EVENT() as the first parameter in DEFINE_EVENT is the
template name, not the event name. We need the second parameter
as that is what the trace_... will use.
Tested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'kconfig-for-40' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
xconfig: merge code path to conf_write()
kconfig: do not record timestamp in .config
gconfig: Hide unused left treeview when start up the interface
gconfig: enable rules hint for main treeviews
MAINTAINERS: Update KCONFIG entry
kconfig-language: add to hints
kconfig: Document the new "visible if" syntax
kconfig: quiet commands when V=0
kconfig: change update-po-config to reflect new layout of arch/um
kconfig: make update-po-config work in KBUILD_OUTPUT
kconfig: rearrange clean-files
kconfig: change gconf to modify hostprogs-y like nconf and mconf
kconfig: change qconf to modify hostprogs-y like nconf and mconf
kconfig: only build kxgettext when needed
nconfig: Silence unused return values from wattrset
kconfig: Do not record timestamp in auto.conf and autoconf.h
kconfig: get rid of unused flags
kconfig: allow multiple inclusion of the same file
kconfig: Avoid buffer underrun in choice input
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
export_report: use warn() to issue WARNING, so they go to stderr
export_report: sort SECTION 2 output
export_report: do collectcfiles work in perl itself
kbuild: make versioncheck work in KBUILD_OUTDIR
kbuild: make includecheck work in KBUILD_OUTDIR
kbuild: make headerdep work in KBUILD_OUTDIR
kbuild: add targets to PHONY
kbuild: don't warn about include/linux/version.h not including itself
eradicate bashisms in scripts/patch-kernel
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
kbuild: Create a kernel-headers RPM
rpm-pkg: Fix when current directory is a symlink
Replace '-' in kernel version with '_'
Currently, printk lines with a only KERN_PREFIX and a quoted string
without a comma or close paren that exceed 80 columns are flagged with a
warning.
ie:
printk(KERN_WARNING "some long string that extends beond 80 cols..."
"and is continued on another line\n");
Allow this form instead of emitting a warning.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many module or file local logging functions use specific prefixes other
than pr|dev|netdev. Allow all forms like foo_printk and foo_err to be
longer than 80 columns.
Also allow MODULE_<BAR> declarations to be longer than 80 columns.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a warning for unterminated quoted strings with line continuations as
these frequently add unwanted whitespace.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For strings and integers, the config_is_xxx macros are useless and
sometimes misleading:
#define CONFIG_INITRAMFS_SOURCE ""
#define config_is_initramfs_source() 1
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Avoid to have multiple path saving the config. This fixes an error check
miss when the window is being closed and the user requested the config
to be written.
Reported-by: Hiromu Yakura <hiromu1996@gmail.com>
Pointed-out-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Michal Marek <mmarek@suse.cz>
It's "include/linux/vermagic.h", not "include/vermagic.h"
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
kbuild: make KBUILD_NOCMDDEP=1 handle empty built-in.o
scripts/kallsyms.c: fix potential segfault
scripts/gen_initramfs_list.sh: Convert to a /bin/sh script
kbuild: Fix GNU make v3.80 compatibility
kbuild: Fix passing -Wno-* options to gcc 4.4+
kbuild: move scripts/basic/docproc.c to scripts/docproc.c
kbuild: Fix Makefile.asm-generic for um
kbuild: Allow to combine multiple W= levels
kbuild: Disable -Wunused-but-set-variable for gcc 4.6.0
Fix handling of backlash character in LINUX_COMPILE_BY name
kbuild: asm-generic support
kbuild: implement several W= levels
kbuild: Fix build with binutils <= 2.19
initramfs: Use KBUILD_BUILD_TIMESTAMP for generated entries
kbuild: Allow to override LINUX_COMPILE_BY and LINUX_COMPILE_HOST macros
kbuild: Drop unused LINUX_COMPILE_TIME and LINUX_COMPILE_DOMAIN macros
kbuild: Use the deterministic mode of ar
kbuild: Call gzip with -n
kbuild: move KALLSYMS_EXTRA_PASS from Kconfig to Makefile
Kconfig: improve KALLSYMS_ALL documentation
Fix up trivial conflict in Makefile
To compile binaries which depend on new kernel interfaces, we need a
kernel-headers RPM
Signed-off-by: Arun Sharma <asharma@fb.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The better fix would be to stop using the parent directory (principle of
least surprise), but as long as we use it, use it consistently.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Also count CONFIG_MODVERSIONS warnings, and print a NOTE at start of
SECTION 2 if any were issued. Section 2 will be empty if the build is
lacking this CONFIG_ item, and user may have missed the warnings, as
they're off screen.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Sort SECTION 2 modules by name. Within those module listings, sort
the symbol providers by name, and remove the count, as it is
misleading; its the kernel-wide count of uses of that symbol, not the
count pertaining to the module being outlined. (this can be seen by
grepping the output for a single symbol). The count is still used to
sort the symbols.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Avoid spawning a shell pipeline doing cat, grep, sed, and do it all
inside perl. The <*.c> globbing construct works at least as far back
as 5.8.9
Note that this is not just an optimization; the sed command
in the pipeline was unterminated, due to lack of escape on the
end-of-line (\$) in the regex, resulting in this:
$ perl ../linux-2.6/scripts/export_report.pl > /dev/null
sed: -e expression #1, char 5: unterminated `s' command
sh: .mod.c/: not found
Comments on an earlier patch sought an all-perl implementation.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
cc: Michal Marek <mmarek@suse.cz>,
cc: linux-kbuild@vger.kernel.org
cc: Arnaud Lacombe lacombar@gmail.com
cc: Stephen Hemminger shemminger@vyatta.com
Signed-off-by: Michal Marek <mmarek@suse.cz>
When the gconfig program starts in full mode view, it shows the
left treeview which belongs to the 'split mode view'. The patch
fix this visual issue.
Signed-off-by: Eduardo Silva <edsiper@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Due to the large amount of rows in the treeviews, is difficult to
match columns with rows, setting the rules hint to 'true' allows the
treeview to alternate background colors in the rows making the data
more readable.
Signed-off-by: Eduardo Silva <edsiper@gmail.com>
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
b43: fix comment typo reqest -> request
Haavard Skinnemoen has left Atmel
cris: typo in mach-fs Makefile
Kconfig: fix copy/paste-ism for dell-wmi-aio driver
doc: timers-howto: fix a typo ("unsgined")
perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
treewide: fix a few typos in comments
regulator: change debug statement be consistent with the style of the rest
Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
audit: acquire creds selectively to reduce atomic op overhead
rtlwifi: don't touch with treewide double semicolon removal
treewide: cleanup continuations and remove logging message whitespace
ath9k_hw: don't touch with treewide double semicolon removal
include/linux/leds-regulator.h: fix syntax in example code
tty: fix typo in descripton of tty_termios_encode_baud_rate
xtensa: remove obsolete BKL kernel option from defconfig
m68k: fix comment typo 'occcured'
arch:Kconfig.locks Remove unused config option.
treewide: remove extra semicolons
...
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits)
macvlan: fix panic if lowerdev in a bond
tg3: Add braces around 5906 workaround.
tg3: Fix NETIF_F_LOOPBACK error
macvlan: remove one synchronize_rcu() call
networking: NET_CLS_ROUTE4 depends on INET
irda: Fix error propagation in ircomm_lmp_connect_response()
irda: Kill set but unused variable 'bytes' in irlan_check_command_param()
irda: Kill set but unused variable 'clen' in ircomm_connect_indication()
rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport()
be2net: Kill set but unused variable 'req' in lancer_fw_download()
irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication()
atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined.
rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer().
rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler()
rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection()
rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window()
pkt_sched: Kill set but unused variable 'protocol' in tc_classify()
isdn: capi: Use pr_debug() instead of ifdefs.
tg3: Update version to 3.119
tg3: Apply rx_discards fix to 5719/5720
...
Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c
as per Davem.
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (107 commits)
perf stat: Add more cache-miss percentage printouts
perf stat: Add -d -d and -d -d -d options to show more CPU events
ftrace/kbuild: Add recordmcount files to force full build
ftrace: Add self-tests for multiple function trace users
ftrace: Modify ftrace_set_filter/notrace to take ops
ftrace: Allow dynamically allocated function tracers
ftrace: Implement separate user function filtering
ftrace: Free hash with call_rcu_sched()
ftrace: Have global_ops store the functions that are to be traced
ftrace: Add ops parameter to ftrace_startup/shutdown functions
ftrace: Add enabled_functions file
ftrace: Use counters to enable functions to trace
ftrace: Separate hash allocation and assignment
ftrace: Create a global_ops to hold the filter and notrace hashes
ftrace: Use hash instead for FTRACE_FL_FILTER
ftrace: Replace FTRACE_FL_NOTRACE flag with a hash of ignored functions
perf bench, x86: Add alternatives-asm.h wrapper
x86, 64-bit: Fix copy_[to/from]_user() checks for the userspace address limit
x86, mem: memset_64.S: Optimize memset by enhanced REP MOVSB/STOSB
x86, mem: memmove_64.S: Optimize memmove by enhanced REP MOVSB/STOSB
...
move LSM-, credentials-, and keys-related files from Documentation/
to Documentation/security/,
add Documentation/security/00-INDEX, and
update all occurrences of Documentation/<moved_file>
to Documentation/security/<moved_file>.
Modifications to recordmcount must be performed on all object
files to stay consistent with what the kernel code may expect.
Add the recordmcount files to the main dependencies to make sure
any change to them causes a full recompile.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Link: http://lkml.kernel.org/r/20110517133646.GP13293@sepie.suse.cz
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Binutils 2.18.50 made a backwards-incompatible change in the way it
writes ELF objects with over 65280 sections, to improve conformance
with the ELF specification and interoperability with other ELF tools.
Specifically, it no longer adds 256 to section indices SHN_LORESERVE
and higher to skip over the reserved range SHN_LORESERVE through
SHN_HIRESERVE; those values are only considered special in the
st_shndx field, and not in other places where section indices are
stored. See:
http://sourceware.org/bugzilla/show_bug.cgi?id=5900http://groups.google.com/group/generic-abi/browse_thread/thread/e8bb63714b072e67/6c63738f12cc8a17
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This patch places every exported symbol in its own section
(i.e. "___ksymtab+printk"). Thus the linker will use its SORT() directive
to sort and finally merge all symbol in the right and final section
(i.e. "__ksymtab").
The symbol prefixed archs use an underscore as prefix for symbols.
To avoid collision we use a different character to create the temporary
section names.
This work was supported by a hardware donation from the CE Linux Forum.
Signed-off-by: Alessio Igor Bogani <abogani@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (folded in '+' fixup)
Tested-by: Dirk Behme <dirk.behme@googlemail.com>
this will allow to use to use
if(config_is_xxx())
if(config_is_xxx_module())
in the code instead of
#ifdef CONFIG_xxx
#ifdef CONFIG_xxx_MODULE
and now let the compiler remove the non usefull code and not the
pre-processor
as done in the mach-types for arm as exmaple
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Do the mcount offset adjustment in the recordmcount.pl/recordmcount.[ch]
at compile time and not in ftrace_call_adjust at run time.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Do the mcount offset adjustment in the recordmcount.pl/recordmcount.[ch]
at compile time and not in ftrace_call_adjust at run time.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Introduce mcount_adjust{,_32,_64} to the C implementation of
recordmcount analog to $mcount_adjust in the perl script.
The adjustment is added to the address of the relocations
against the mcount symbol. If this adjustment is done by
recordmcount at compile time the ftrace_call_adjust function
can be turned into a nop.
Cc: John Reiser <jreiser@bitwagon.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code to get the symbol, string, and relp pointers in the two functions
sift_rel_mcount() and nop_mcount() are identical and also non-trivial.
Moving this duplicate code into a single helper function makes the code
easier to read and more maintainable.
Cc: John Reiser <jreiser@bitwagon.com>
Link: http://lkml.kernel.org/r/20110421023739.723658553@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code in sift_rel_mcount() and nop_mcount() to get the mcount symbol
number is identical. Replace the two locations with a call to a function
that does the work.
Cc: John Reiser <jreiser@bitwagon.com>
Link: http://lkml.kernel.org/r/20110421023739.488093407@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When mcount is called in a section that ftrace will not modify it into
a nop, we want to warn about this. But not warn about this always. Now
if the user builds the kernel with the option RECORDMCOUNT_WARN=1 then
the build will warn about mcount callers that are ignored and will just
waste execution time.
Acked-by: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Link: http://lkml.kernel.org/r/20110421023738.714956282@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's some sections that should not have mcount recorded and should not have
modifications to the that code. But currently they waste some time by calling
mcount anyway (which simply returns). As the real answer should be to
either whitelist the section or have gcc ignore it fully.
This change adds a option to recordmcount to warn when it finds a section
that is ignored by ftrace but still contains mcount callers. This is not on
by default as developers may not know if the section should be completely
ignored or added to the whitelist.
Cc: John Reiser <jreiser@bitwagon.com>
Link: http://lkml.kernel.org/r/20110421023738.476989377@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are sections that are ignored by ftrace for the function tracing because
the text is in a section that can be removed without notice. The mcount calls
in these sections are ignored and ftrace never sees them. The downside of this
is that the functions in these sections still call mcount. Although the mcount
function is defined in assembly simply as a return, this added overhead is
unnecessary.
The solution is to convert these callers into nops at compile time.
A better solution is to add 'notrace' to the section markers, but as new sections
come up all the time, it would be nice that they are delt with when they
are created.
Later patches will deal with finding these sections and doing the proper solution.
Thanks to H. Peter Anvin for giving me the right nops to use for x86.
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Reiser <jreiser@bitwagon.com>
Link: http://lkml.kernel.org/r/20110421023738.237101176@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
PROGBITS is not enough to determine if the section should be modified
or not. Only process sections that are marked as executable.
Cc: John Reiser <jreiser@bitwagon.com>
Link: http://lkml.kernel.org/r/20110421023737.991485123@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The .kprobe.text section is safe to modify mcount to nop and tracing.
Add it to the whitelist in recordmcount.c and recordmcount.pl.
Cc: John Reiser <jreiser@bitwagon.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20110421023737.743350547@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The Linux style for switch statements is:
switch (var) {
case x:
[...]
break;
}
Not:
switch (var) {
case x: {
[...]
} break;
Cc: John Reiser <jreiser@bitwagon.com>
Link: http://lkml.kernel.org/r/20110421023737.523968644@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The Linux ftrace subsystem style for comparing is:
var == 1
var > 0
and not:
1 == var
0 < var
It is considered that Linux developers are smart enough not to do the
if (var = 1)
mistake.
Cc: John Reiser <jreiser@bitwagon.com>
Link: http://lkml.kernel.org/r/20110421023737.290712238@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Based on a patch by Rabin Vincent.
Fix building with KBUILD_NOCMDDEP=1, which currently does not work
because it does not build built-in.o with no dependencies:
LD fs/notify/built-in.o
ld: cannot find fs/notify/dnotify/built-in.o: No such file or directory
ld: cannot find fs/notify/inotify/built-in.o: No such file or directory
ld: cannot find fs/notify/fanotify/built-in.o: No such file or directory
Reported-and-tested-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Description:
This bug hardly appears during real kernel compiling,
because the vmlinux symbols table is huge.
But we can still catch it under strict condition , as follows.
$ echo "c101b97b T do_fork" | ./scripts/kallsyms --all-symbols
#include <asm/types.h>
......
......
.globl kallsyms_token_table
ALGN
kallsyms_token_table:
Segmentation fault (core dumped)
$
If symbols table is small, all entries in token_profit[0x10000] may
decrease to 0 after several calls of compress_symbols() in optimize_result().
In that case, find_best_token() always return 0 and
best_table[i] is set to "\0\0" and best_table_len[i] is set to 2.
As a result, expand_symbol(best_table[0]="\0\0", best_table_len[0]=2, buf)
in write_src() will run in infinite recursion until stack overflows,
causing segfault.
This patch checks the find_best_token() return value. If all entries in
token_profit[0x10000] become 0 according to return value, it breaks the loop
in optimize_result().
And expand_symbol() works well when best_table_len[i] is 0.
Signed-off-by: Xiaochen Wang <wangxiaochen0@gmail.com>
Acked-by: Paulo Marques <pmarques@grupopie.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Replace bashisms with POSIX-compatible shell scripting.
Notably, de-duplicate '/' using a sed command from elsewhere in the same script
rather than "${name//\/\///}".
Commit by Jamey Sharp and Josh Triplett.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Broadcom has released cards based on a new AMBA-based bus type. From a
programming point of view, this new bus type differs from AMBA and does
not use AMBA common registers. It also differs enough from SSB. We
decided that a new bus driver is needed to keep the code clean.
In its current form, the driver detects devices present on the bus and
registers them in the system. It allows registering BCMA drivers for
specified bus devices and provides them basic operations. The bus driver
itself includes two important bus managing drivers: ChipCommon core
driver and PCI(c) core driver. They are early used to allow correct
initialization.
Currently code is limited to supporting buses on PCI(e) devices, however
the driver is designed to be used also on other hosts. The host
abstraction layer is implemented and already used for PCI(e).
Support for PCI(e) hosts is working and seems to be stable (access to
80211 core was tested successfully on a few devices). We can still
optimize it by using some fixed windows, but this can be done later
without affecting any external code. Windows are just ranges in MMIO
used for accessing cores on the bus.
Cc: Greg KH <greg@kroah.com>
Cc: Michael Büsch <mb@bu3sch.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: George Kashperko <george@znau.edu.ua>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Botting <andy@andybotting.com>
Cc: linuxdriverproject <devel@linuxdriverproject.org>
Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Removing the '-' results in hard to read filenames such as:
kernel-2.6.35.2000042g76e4caf-28.x86_64.rpm
kernel-2.6.35.2_000042_g76e4caf-28.x86_64.rpm is easier to
read.
Signed-off-by: Arun Sharma <asharma@fb.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Starting with 4.4, gcc will happily accept -Wno-<anything> in the
cc-option test and complain later when compiling a file that has some
other warning. This rather unexpected behavior is intentional as per
http://gcc.gnu.org/PR28322, so work around it by testing for support of
the opposite option (without the no-). Introduce a new Makefile function
cc-disable-warning that does this and update two uses of cc-option in
the toplevel Makefile.
Reported-and-tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Do nothing if arch/$(SRCARCH)/include/asm/Kbuild does not exist, which
is the case of um.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Add support for make W=12, make W=123 and so on, to enable warnings from
multiple W= levels. Normally, make W=<level> does not include warnings
from the previous level.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Disable the new -Wunused-but-set-variable that was added in gcc 4.6.0
It produces more false positives than useful warnings.
This can still be enabled using W=1
Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When using a domain login, `whoami` returns the login in
user\domain format. This leads to either warnings on unrecognised
escape sequences or escaped characters being generated for the user.
This patch ensures that any backslash is escaped to a double-backslash
to make sure the name is preserved correctly. This patch does not
enforce escaping on the KBUILD_BUILD_USER variable, as this is something
the user has control of and can escape if required.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski.000@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This patch makes checkversion.pl not warn that include/linux/version.h
dosen't include itself.
Signed-off-by: Peter Foley <pefoley2@verizon.net>
[mmarek: simplified to use 'next if' syntax]
Signed-off-by: Michal Marek <mmarek@suse.cz>
There is an increasing amount of header files
shared between individual architectures in asm-generic.
To avoid a lot of dummy wrapper files that just
include the corresponding file in asm-generic provide
some basic support in kbuild for this.
With the following patch an architecture can maintain
a list of files in the file arch/$(ARCH)/include/asm/Kbuild
To use a generic file just add:
generic-y += <name-of-header-file.h>
For each file listed kbuild will generate the necessary
wrapper in arch/$(ARCH)/include/generated/asm.
When installing userspace headers a wrapper is likewise created.
The original inspiration for this came from the unicore32
patchset - although a different method is used.
The patch includes several improvements from Arnd Bergmann.
Michael Marek contributed Makefile.asm-generic.
Remis Baima did an intial implementation along to achive
the same - see https://patchwork.kernel.org/patch/13352/
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Guan Xuetao <guanxuetao@mprc.pku.edu.cn>
Tested-by: Guan Xuetao <guanxuetao@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Building a kernel with "make W=1" produces far too much noise to be
useful.
Divide the warning options in three groups:
W=1 - warnings that may be relevant and does not occur too often
W=2 - warnings that occur quite often but may still be relevant
W=3 - the more obscure warnings, can most likely be ignored
When building the whole kernel, those levels produce:
W=1 - 4859 warnings
W=2 - 1394 warnings
W=3 - 86666 warnings
respectively. Warnings have been counted with Geert's script at
http://www.kernel.org/pub/linux/kernel/people/geert/linux-log/linux-log-summary.pl
Many warnings occur from .h files so fixing one file may have a nice
effect on the total number of warnings.
With these changes I am actually tempted to try W=1 now and then.
Previously there was just too much noise.
Borislav:
- make the W= levels exclusive
- move very noisy and making little sense for the kernel warnings to W=3
- drop -Woverlength-strings due to useless warning message
- copy explanatory text for the different warning levels to 'make help'
- recount warnings per level
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Borislav Petkov <bp@alien8.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Commit 40aee729b3 ('kconfig: fix default value for choice input')
fixed some cases where kconfig would select the wrong option from a
choice with a single valid option and thus enter an infinite loop.
However, this broke the test for user input of the form 'N?', because
when kconfig selects the single valid option the input is zero-length
and the test will read the byte before the input buffer. If this
happens to contain '?' (as it will in a mips build on Debian unstable
today) then kconfig again enters an infinite loop.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@kernel.org [2.6.17+]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ignore the return value from wattrset since we ignore the return
value in nconf.gui.c as well.
scripts/kconfig/nconf.c: In function 'print_function_line':
scripts/kconfig/nconf.c:376: warning: value computed is not used
scripts/kconfig/nconf.c:380: warning: value computed is not used
scripts/kconfig/nconf.c:387: warning: value computed is not used
scripts/kconfig/nconf.c: In function 'show_menu':
scripts/kconfig/nconf.c:956: warning: value computed is not used
scripts/kconfig/nconf.c:961: warning: value computed is not used
scripts/kconfig/nconf.c:963: warning: value computed is not used
scripts/kconfig/nconf.c:965: warning: value computed is not used
Cc: Nir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
gen_init_cpio gets the current time and uses it for each symlink,
special file, and directory. Grab the current time once and make it
possible to override it with the KBUILD_BUILD_TIMESTAMP variable for
reproducible builds.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Make it possible to override the user@host string displayed during boot
and in /proc/version by the environment variables KBUILD_BUILD_USER and
KBUILD_BUILD_HOST. Several distributions patch scripts/mkcompile_h to
achieve this, so let's provide an official way. Also, document the
KBUILD_BUILD_TIMESTAMP variable while at it.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Now that we detect recusrion of sourced files, get rid of
now unused flags.
Regenerate lex.zconf.c_shipped file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Allow 'source'ing the same file from multiple places (eg. from
different files, and/or under different conditions).
To avoid circular inclusion, scan the source-ancestry of the
current file, and abort if already sourced in this branch.
Regenerate the pre-parsed lex.zconf.c_shipped file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
commit 40aee729b3 ('kconfig: fix default
value for choice input') fixed some cases where kconfig would select
the wrong option from a choice with a single valid option and thus
enter an infinite loop.
However, this broke the test for user input of the form 'N?', because
when kconfig selects the single valid option the input is zero-length
and the test will read the byte before the input buffer. If this
happens to contain '?' (as it will in a mips build on Debian unstable
today) then kconfig again enters an infinite loop.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@kernel.org [2.6.17+]
Signed-off-by: Michal Marek <mmarek@suse.cz>
Silence a remaining annoying (or worse, irritating - "is my entire patched tree
broken now!?") bashism-related message that occurs when /bin/sh is configured
to instead deploy dash, a POSIX-compliant shell, as is the pretty much
standard case on e.g. Debian.
Current kernel version is 2.6.38 ( Flesh-Eating Bats with Fangs)
===> linux-2.6.38.patch-kernel_test/scripts/patch-kernel: line 253: [: =: unary operator expected <===
cannot find patch file: patch-2.6.39
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
I'm not sure why the read-only data section is excluded from the report,
it seems as relevant as the other data sections (b and d).
I've stripped the symbols starting with __mod_ as they can have their
names dynamically generated and thus comparison between binaries is not
possible.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Andi Kleen <andi@firstfloor.org>
Acked-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because the second and third arguments of memset have the same type, it
turns out to be really easy to mix them up.
This bug comes up time after time, so checkpatch should really be checking
for it at patch submission time.
Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If you run checkpatch against multiple patches, and one of them has a
whitespace issue which can be helped via a script (rpt_cleaners), you will
see the same NOTE over and over for all subsequent patches. It makes it
seem like those patches also have whitespace problems when in reality,
there's only one or two bad apples.
So reset rpt_cleaners back to 0 after we've issued the note so that it
only shows up near the patch with the actual problems.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1. simple_strto*() do not contain overflow checks and crufty,
libc way to indicate failure.
2. strict_strto*() also do not have overflow checks but the name and
comments pretend they do.
3. Both families have only "long long" and "long" variants,
but users want strtou8()
4. Both "simple" and "strict" prefixes are wrong:
Simple doesn't exactly say what's so simple, strict should not exist
because conversion should be strict by default.
The solution is to use "k" prefix and add convertors for more types.
Enter
kstrtoull()
kstrtoll()
kstrtoul()
kstrtol()
kstrtouint()
kstrtoint()
kstrtou64()
kstrtos64()
kstrtou32()
kstrtos32()
kstrtou16()
kstrtos16()
kstrtou8()
kstrtos8()
Include runtime testsuite (somewhat incomplete) as well.
strict_strto*() become deprecated, stubbed to kstrto*() and
eventually will be removed altogether.
Use kstrto*() in code today!
Note: on some archs _kstrtoul() and _kstrtol() are left in tree, even if
they'll be unused at runtime. This is temporarily solution,
because I don't want to hardcode list of archs where these
functions aren't needed. Current solution with sizeof() and
__alignof__ at least always works.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Extend the usage of the K section in the MAINTAINERS file to support
matching regular expressions to any arbitrary text that may precede the
patch itself. For example, the commit message or mail headers generated
by git-format-patch.
Signed-off-by: Joe Perches <joe@perches.com>
Original-patch-by: L. Alberto Giménez <agimenez@sysvalve.es>
Acked-by: L. Alberto Giménez <agimenez@sysvalve.es>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
kbuild: Make DEBUG_SECTION_MISMATCH selectable, but not on by default
genksyms: Regenerate lexer and parser
genksyms: Track changes to enum constants
genksyms: simplify usage of find_symbol()
genksyms: Add helpers for building string lists
genksyms: Simplify printing of symbol types
genksyms: Simplify lexer
genksyms: Do not paste the bison header file to lex.c
modpost: fix trailing comma
KBuild: silence "'scripts/unifdef' is up to date."
kbuild: Add extra gcc checks
kbuild: reenable section mismatch analysis
unifdef: update to upstream version 2.5
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
scripts/extract-ikconfig: add xz compression support
kbuild: add GNU GLOBAL tags generation
setlocalversion: update mercurial tag parsing
Regenerated the parser after "genksyms: Track changes to enum
constants".
Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Enum constants can be used as array sizes; if the enum itself does not
appear in the symbol expansion, a change in the enum constant will go
unnoticed. Example patch that changes the ABI but does not change the
checksum with current genksyms:
| enum e {
| E1,
| E2,
|+ E3,
| E_MAX
| };
|
| struct s {
| int a[E_MAX];
| }
|
| int f(struct s *s) { ... }
| EXPORT_SYMBOL(f)
Therefore, remember the value of each enum constant and
expand each occurence to <constant> <value>. The value is not actually
computed, but instead an expression in the form
(last explicitly assigned value) + N
is used. This avoids having to parse and semantically understand whole
of C.
Note: The changes won't take effect until the lexer and parser are
rebuilt by the next patch.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Allow searching for symbols of an exact type. The lexer does this and a
subsequent patch will add one more usage.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Instead of special-casing SYM_NORMAL, do not map any name to it. Also
explicitly set the single-letter name of the symbol type, which will be
needed by a further patch. The only user-visible change is one debug
printf.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
The header is already #included, no need to include it a second time.
lex.c_shipped was regenerated using flex-2.5.35.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Consolidate locations that print a section whitelist into
calls to print_section_list().
Fix print_section_list() so that it does not print a trailing
comma & space:
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
becomes:
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
While changing our build system over to use the headers_install target
as part of our klibc build, the following message started showing up in
our logs:
make[2]: `scripts/unifdef' is up to date.
It turns out that the build blindly invokes a recursive make on this
target, which causes make to emit this message when the target is
already up to date. This isn't seen for most targets as the rest of the
build relies primarily on the default target and on PHONY targets when
invoking make recursively.
Silence the above message when building unifdef as part of
headers_install by hiding it behind a new PHONY target called
"build_unifdef" that has an empty recipe.
Signed-off-by: Mike Waychison <mikew@google.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (33 commits)
AppArmor: kill unused macros in lsm.c
AppArmor: cleanup generated files correctly
KEYS: Add an iovec version of KEYCTL_INSTANTIATE
KEYS: Add a new keyctl op to reject a key with a specified error code
KEYS: Add a key type op to permit the key description to be vetted
KEYS: Add an RCU payload dereference macro
AppArmor: Cleanup make file to remove cruft and make it easier to read
SELinux: implement the new sb_remount LSM hook
LSM: Pass -o remount options to the LSM
SELinux: Compute SID for the newly created socket
SELinux: Socket retains creator role and MLS attribute
SELinux: Auto-generate security_is_socket_class
TOMOYO: Fix memory leak upon file open.
Revert "selinux: simplify ioctl checking"
selinux: drop unused packet flow permissions
selinux: Fix packet forwarding checks on postrouting
selinux: Fix wrong checks for selinux_policycap_netpeer
selinux: Fix check for xfrm selinux context algorithm
ima: remove unnecessary call to ima_must_measure
IMA: remove IMA imbalance checking
...
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (184 commits)
perf probe: Clean up probe_point_lazy_walker() return value
tracing: Fix irqoff selftest expanding max buffer
tracing: Align 4 byte ints together in struct tracer
tracing: Export trace_set_clr_event()
tracing: Explain about unstable clock on resume with ring buffer warning
ftrace/graph: Trace function entry before updating index
ftrace: Add .ref.text as one of the safe areas to trace
tracing: Adjust conditional expression latency formatting.
tracing: Fix event alignment: skb:kfree_skb
tracing: Fix event alignment: mce:mce_record
tracing: Fix event alignment: kvm:kvm_hv_hypercall
tracing: Fix event alignment: module:module_request
tracing: Fix event alignment: ftrace:context_switch and ftrace:wakeup
tracing: Remove lock_depth from event entry
perf header: Stop using 'self'
perf session: Use evlist/evsel for managing perf.data attributes
perf top: Don't let events to eat up whole header line
perf top: Fix events overflow in top command
ring-buffer: Remove unused #include <linux/trace_irq.h>
tracing: Add an 'overwrite' trace_option.
...
Recent change to fixdep:
commit b7bd182176
Author: Michal Marek <mmarek@suse.cz>
Date: Thu Feb 17 15:13:54 2011 +0100
fixdep: Do not record dependency on the source file itself
changed the format of the *.cmd files without realizing that it is also
used by modpost. Put the path to the source file to the file back, in a
special variable, so that modpost sees all source files when calculating
srcversion for modules.
Reported-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The section .ref.text will not go away unexpectedly and is
safe to trace. Add it to the safe list of sections to allow
tracing.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a 'W=1' Makefile switch which adds additional checking per build
object.
The idea behind this option is targeted at developers who, in the
process of writing their code, want to do the occasional
make W=1 [target.o]
and let gcc do more extensive code checking for them. Then, they
could eyeball the output for valid gcc warnings about various
bugs/discrepancies which are not reported during the normal build
process.
For more background information and a use case, read through this
thread: http://marc.info/?l=kernel-janitors&m=129802065918147&w=2
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The security_is_socket_class() is auto-generated by genheaders based
on classmap.h to reduce maintenance effort when a new class is defined
in SELinux kernel. The name for any socket class should be suffixed by
"socket" and doesn't contain more than one substr of "socket".
Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
We just leave the numbers assinged as commemoration and in case that
someone was crazy enough to reimplement the test stuff out of tree.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The dependency is already expressed by the Makefiles, storing it in the
.cmd file breaks build if a .c file is replaced by .S or vice versa,
because the .cmd file contains
foo/bar.o: foo/bar.c ...
foo/bar.c ... :
so the foo/bar.c -> foo/bar.o rule triggers even if there is no
foo/bar.c anymore.
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Add support for kernels compressed with xz to the extract-ikconfig script.
Signed-off-by: Dick Streefland <dick@streefland.net>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
OK, the copyright allows you to write a copy, still I think the lawyers
prefer the correct spelling.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
LKML-Reference: <1295899921-11333-1-git-send-email-u.kleine-koenig@pengutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When building linux-headers package using deb-pkg, builddeb erroneously assume
current directory is the source tree. This is not true if building in another
directory, using make O=... deb-pkg.
This patch fix this problem.
Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Tested-by: Nikolai Kondrashov <spbnick@gmail.com>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Fix a long-standing cpp compatibility bug. The -DFOO argument
(without an explicit value) should define FOO to 1 not to the empty
string.
Add a -o option to support overwriting a file in place, and a -S
option to list the nesting depth of symbols. Include line numbers
in debugging output. Support CRLF newlines.
Signed-off-by: Tony Finch <dot@dotat.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
GNU GLOBAL (http://www.gnu.org/software/global/) is a source code tagging system
It is really cheap to support it in kbuild system.
Signed-off-by: Jianbin Kang <kjbmail@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Fix x86 centric path to allow building kernel-header packages for
other architecture.
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The tag output of hg doesn't quite match what setlocalversion currently
expects, so update it to handle the latest format.
Signed-off-by: Mike Crowe <mcrowe@zipitwireless.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This implements the API defined in <linux/decompress/generic.h> which is
used for kernel, initramfs, and initrd decompression. This patch together
with the first patch is enough for XZ-compressed initramfs and initrd;
XZ-compressed kernel will need arch-specific changes.
The buffering requirements described in decompress_unxz.c are stricter
than with gzip, so the relevant changes should be done to the
arch-specific code when adding support for XZ-compressed kernel.
Similarly, the heap size in arch-specific pre-boot code may need to be
increased (30 KiB is enough).
The XZ decompressor needs memmove(), memeq() (memcmp() == 0), and
memzero() (memset(ptr, 0, size)), which aren't available in all
arch-specific pre-boot environments. I'm including simple versions in
decompress_unxz.c, but a cleaner solution would naturally be nicer.
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In userspace, the .lzma format has become mostly a legacy file format that
got superseded by the .xz format. Similarly, LZMA Utils was superseded by
XZ Utils.
These patches add support for XZ decompression into the kernel. Most of
the code is as is from XZ Embedded <http://tukaani.org/xz/embedded.html>.
It was written for the Linux kernel but is usable in other projects too.
Advantages of XZ over the current LZMA code in the kernel:
- Nice API that can be used by other kernel modules; it's
not limited to kernel, initramfs, and initrd decompression.
- Integrity check support (CRC32)
- BCJ filters improve compression of executable code on
certain architectures. These together with LZMA2 can
produce a few percent smaller kernel or Squashfs images
than plain LZMA without making the decompression slower.
This patch: Add the main decompression code (xz_dec), testing module
(xz_dec_test), wrapper script (xz_wrap.sh) for the xz command line tool,
and documentation. The xz_dec module is enough to have a usable XZ
decompressor e.g. for Squashfs.
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's a __packed #define for __attribute__((packed)). Add a checkpatch
to tell people about it.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Exporting world writable sysfs/debugfs files is usually a bad thing. Warn
about it.
Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should only claim that something is a cast if we did not encouter a
token before, that did set av_pending.
This fixes the operator * in the line below to be detected as binary (vs
unary).
kmalloc(sizeof(struct alphatrack_ocmd) * true_size, GFP_KERNEL);
Reported-by: Audun Hoem <audun.hoem@gmail.com>
Signed-off-by: Florian Mickler <florian@mickler.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On Fri, 2010-11-05 at 13:50 -0700, Andrew Morton wrote:
> z:/usr/src/git26> perl scripts/get_maintainer.pl -file mm/mempolicy.c
> linux-mm@kvack.org
> linux-kernel@vger.kernel.org
Turns out this is an arguable defect in the script.
The MAINTAINERS entry for mm is:
MEMORY MANAGEMENT
L: linux-mm@kvack.org
W: http://www.linux-mm.org
S: Maintained
F: include/linux/mm.h
F: mm/
There's a maintainer entry, but no named individual, so the script doesn't
use git history via --git-fallback.
This is also a defect for MAINTAINERS with status entries marked "Orphan"
or "Odd fixes".
The script now checks a section for any "M:" entry and that an "S:" entry
is supported or maintained. If both those conditions are not satisified,
use --git-fallback as appropriate.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
