When changing a file's acl mask, __ext4_set_acl() will first set the group
bits of i_mode to the value of the mask, and only then set the actual
extended attribute representing the new acl.
If the second part fails (due to lack of space, for example) and the file
had no acl attribute to begin with, the system will from now on assume
that the mask permission bits are actual group permission bits, potentially
granting access to the wrong users.
Prevent this by only changing the inode mode after the acl has been set.
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Two variables in ext4_inode_info, i_reserved_meta_blocks and
i_allocated_meta_blocks, are unused. Removing them saves a little
memory per in-memory inode and cleans up clutter in several tracepoints.
Adjust tracepoint output from ext4_alloc_da_blocks() for consistency
and fix a typo and whitespace near these changes.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Commit 914f82a32d "ext4: refactor direct IO code" deleted
ext4_ext_direct_IO(), but references to that function remain in
comments. Update them to refer to ext4_direct_IO_write().
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Firstly by applying the following with coccinelle's spatch:
@@ expression SB; @@
-SB->s_flags & MS_RDONLY
+sb_rdonly(SB)
to effect the conversion to sb_rdonly(sb), then by applying:
@@ expression A, SB; @@
(
-(!sb_rdonly(SB)) && A
+!sb_rdonly(SB) && A
|
-A != (sb_rdonly(SB))
+A != sb_rdonly(SB)
|
-A == (sb_rdonly(SB))
+A == sb_rdonly(SB)
|
-!(sb_rdonly(SB))
+!sb_rdonly(SB)
|
-A && (sb_rdonly(SB))
+A && sb_rdonly(SB)
|
-A || (sb_rdonly(SB))
+A || sb_rdonly(SB)
|
-(sb_rdonly(SB)) != A
+sb_rdonly(SB) != A
|
-(sb_rdonly(SB)) == A
+sb_rdonly(SB) == A
|
-(sb_rdonly(SB)) && A
+sb_rdonly(SB) && A
|
-(sb_rdonly(SB)) || A
+sb_rdonly(SB) || A
)
@@ expression A, B, SB; @@
(
-(sb_rdonly(SB)) ? 1 : 0
+sb_rdonly(SB)
|
-(sb_rdonly(SB)) ? A : B
+sb_rdonly(SB) ? A : B
)
to remove left over excess bracketage and finally by applying:
@@ expression A, SB; @@
(
-(A & MS_RDONLY) != sb_rdonly(SB)
+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
|
-(A & MS_RDONLY) == sb_rdonly(SB)
+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
)
to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: David Howells <dhowells@redhat.com>
feature, which allows ext4 directories to support over 2 billion
directory entries (assuming ~64 byte file names; in practice, users
will run into practical performance limits first.) This feature was
originally written by the Lustre team, and credit goes to Artem
Blagodarenko from Seagate for getting this feature upstream.
The second major major feature allows ext4 to support extended
attribute values up to 64k. This feature was also originally from
Lustre, and has been enhanced by Tahsin Erdogan from Google with a
deduplication feature so that if multiple files have the same xattr
value (for example, Windows ACL's stored by Samba), only one copy will
be stored on disk for encoding and caching efficiency.
We also have the usual set of bug fixes, cleanups, and optimizations.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAllhl5AACgkQ8vlZVpUN
gaOiNQf+L23sT9KIQmFwQP38vkBVw67Eo7gBfevmk7oqQLiRppT5mmLzW8EWEDxR
PVaDQXvSZi18wSCAAcCd1ZqeIZk0P6tst0ufnIT60tGlZdUlwSLyrqvV/30axR2g
6kcnv90ZszrQNx5U8q8bMzNrs1KtyPHFCRzavFsBX11WezNSpWnH2in/uxO+t9Jy
F2zlrLUrE2m9AVMH48Dh6LbeaB6pqgr4k3jq1jG4Iqb2h9xgU8OKhs8gL07YS+Qi
5A7s8GIvYQSoZUO9DOOie2f1zhpO0KrhXchyZTJukVQH7TsmFxoSh0vhXnP1Bohu
CNLV6dzetDT0VfmPr1WhVe7lhZeeVw==
=FFkF
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The first major feature for ext4 this merge window is the largedir
feature, which allows ext4 directories to support over 2 billion
directory entries (assuming ~64 byte file names; in practice, users
will run into practical performance limits first.) This feature was
originally written by the Lustre team, and credit goes to Artem
Blagodarenko from Seagate for getting this feature upstream.
The second major major feature allows ext4 to support extended
attribute values up to 64k. This feature was also originally from
Lustre, and has been enhanced by Tahsin Erdogan from Google with a
deduplication feature so that if multiple files have the same xattr
value (for example, Windows ACL's stored by Samba), only one copy will
be stored on disk for encoding and caching efficiency.
We also have the usual set of bug fixes, cleanups, and optimizations"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (47 commits)
ext4: fix spelling mistake: "prellocated" -> "preallocated"
ext4: fix __ext4_new_inode() journal credits calculation
ext4: skip ext4_init_security() and encryption on ea_inodes
fs: generic_block_bmap(): initialize all of the fields in the temp bh
ext4: change fast symlink test to not rely on i_blocks
ext4: require key for truncate(2) of encrypted file
ext4: don't bother checking for encryption key in ->mmap()
ext4: check return value of kstrtoull correctly in reserved_clusters_store
ext4: fix off-by-one fsmap error on 1k block filesystems
ext4: return EFSBADCRC if a bad checksum error is found in ext4_find_entry()
ext4: return EIO on read error in ext4_find_entry
ext4: forbid encrypting root directory
ext4: send parallel discards on commit completions
ext4: avoid unnecessary stalls in ext4_evict_inode()
ext4: add nombcache mount option
ext4: strong binding of xattr inode references
ext4: eliminate xattr entry e_hash recalculation for removes
ext4: reserve space for xattr entries/names
quota: add get_inode_usage callback to transfer multi-inode charges
ext4: xattr inode deduplication
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAllhktgACgkQ8vlZVpUN
gaOQIQf+KM2s46sxxEl0/hjdBXR4OxTmSS2/0900NPyg7JHKlL8PdYslOyvMiKjo
wEi+YPwwQgbHtxhI1VINfV/q12MZHwvmFOfD9NzjrISwfmfsKj0dBgZDAfBH82sK
12wKgUxA8xJ4P+Xdvnz2PokRcFCsh1YUr5IUQkP3JR2RZOxNFUj42QwPJ2yWzqxO
MsnepMjIHsxvXZi0E7sPjRaoFsh3DDeLmNl8sX6INodC7hxJ1LotYKqJhA4stQpB
ezXY2tabwg3gaOWvWH7THyHhGntbZVDga3iRrKdNLahXN8OBdHktmG75ubiN6tEg
x80pqQLgr41yIQuJVOuyeh5jLYZrww==
=i4r9
-----END PGP SIGNATURE-----
Merge tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Add support for 128-bit AES and some cleanups to fscrypt"
* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: make ->dummy_context() return bool
fscrypt: add support for AES-128-CBC
fscrypt: inline fscrypt_free_filename()
-----BEGIN PGP SIGNATURE-----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=3Z93
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull Writeback error handling updates from Jeff Layton:
"This pile represents the bulk of the writeback error handling fixes
that I have for this cycle. Some of the earlier patches in this pile
may look trivial but they are prerequisites for later patches in the
series.
The aim of this set is to improve how we track and report writeback
errors to userland. Most applications that care about data integrity
will periodically call fsync/fdatasync/msync to ensure that their
writes have made it to the backing store.
For a very long time, we have tracked writeback errors using two flags
in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
writeback error occurs (via mapping_set_error) and are cleared as a
side-effect of filemap_check_errors (as you noted yesterday). This
model really sucks for userland.
Only the first task to call fsync (or msync or fdatasync) will see the
error. Any subsequent task calling fsync on a file will get back 0
(unless another writeback error occurs in the interim). If I have
several tasks writing to a file and calling fsync to ensure that their
writes got stored, then I need to have them coordinate with one
another. That's difficult enough, but in a world of containerized
setups that coordination may even not be possible.
But wait...it gets worse!
The calls to filemap_check_errors can be buried pretty far down in the
call stack, and there are internal callers of filemap_write_and_wait
and the like that also end up clearing those errors. Many of those
callers ignore the error return from that function or return it to
userland at nonsensical times (e.g. truncate() or stat()). If I get
back -EIO on a truncate, there is no reason to think that it was
because some previous writeback failed, and a subsequent fsync() will
(incorrectly) return 0.
This pile aims to do three things:
1) ensure that when a writeback error occurs that that error will be
reported to userland on a subsequent fsync/fdatasync/msync call,
regardless of what internal callers are doing
2) report writeback errors on all file descriptions that were open at
the time that the error occurred. This is a user-visible change,
but I think most applications are written to assume this behavior
anyway. Those that aren't are unlikely to be hurt by it.
3) document what filesystems should do when there is a writeback
error. Today, there is very little consistency between them, and a
lot of cargo-cult copying. We need to make it very clear what
filesystems should do in this situation.
To achieve this, the set adds a new data type (errseq_t) and then
builds new writeback error tracking infrastructure around that. Once
all of that is in place, we change the filesystems to use the new
infrastructure for reporting wb errors to userland.
Note that this is just the initial foray into cleaning up this mess.
There is a lot of work remaining here:
1) convert the rest of the filesystems in a similar fashion. Once the
initial set is in, then I think most other fs' will be fairly
simple to convert. Hopefully most of those can in via individual
filesystem trees.
2) convert internal waiters on writeback to use errseq_t for
detecting errors instead of relying on the AS_* flags. I have some
draft patches for this for ext4, but they are not quite ready for
prime time yet.
This was a discussion topic this year at LSF/MM too. If you're
interested in the gory details, LWN has some good articles about this:
https://lwn.net/Articles/718734/https://lwn.net/Articles/724307/"
* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
btrfs: minimal conversion to errseq_t writeback error reporting on fsync
xfs: minimal conversion to errseq_t writeback error reporting
ext4: use errseq_t based error handling for reporting data writeback errors
fs: convert __generic_file_fsync to use errseq_t based reporting
block: convert to errseq_t based writeback error tracking
dax: set errors in mapping when writeback fails
Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
fs: new infrastructure for writeback error handling and reporting
lib: add errseq_t type and infrastructure for handling it
mm: don't TestClearPageError in __filemap_fdatawait_range
mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
jbd2: don't clear and reset errors after waiting on writeback
buffer: set errors in mapping at the time that the error occurs
fs: check for writeback errors after syncing out buffers in generic_file_fsync
buffer: use mapping_set_error instead of setting the flag
mm: fix mapping_set_error call in me_pagecache_dirty
Trivial fix to spelling mistake in mb_debug debug message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a call to filemap_report_wb_err at the end of ext4_sync_file. This
will ensure that we check and advance the errseq_t in the file, which
allows us to track and report errors on all open fds when they occur.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
ea_inode feature allows creating extended attributes that are up to
64k in size. Update __ext4_new_inode() to pick increased credit limits.
To avoid overallocating too many journal credits, update
__ext4_xattr_set_credits() to make a distinction between xattr create
vs update. This helps __ext4_new_inode() because all attributes are
known to be new, so we can save credits that are normally needed to
delete old values.
Also, have fscrypt specify its maximum context size so that we don't
end up allocating credits for 64k size.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Extended attribute inodes are internal to ext4. Adding encryption/security
related attributes on them would mean dealing with nested calls into ea code.
Since they have no direct exposure to user mode, just avoid creating ea
entries for them.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_inode_info->i_data is the storage area for 4 types of data:
a) Extents data
b) Inline data
c) Block map
d) Fast symlink data (symlink length < 60)
Extents data case is positively identified by EXT4_INODE_EXTENTS flag.
Inline data case is also obvious because of EXT4_INODE_INLINE_DATA
flag.
Distinguishing c) and d) however requires additional logic. This
currently relies on i_blocks count. After subtracting external xattr
block from i_blocks, if it is greater than 0 then we know that some
data blocks exist, so there must be a block map.
This logic got broken after ea_inode feature was added. That feature
charges the data blocks of external xattr inodes to the referencing
inode and so adds them to the i_blocks. To fix this, we could subtract
ea_inode blocks by iterating through all xattr entries and then check
whether remaining i_blocks count is zero. Besides being complicated,
this won't change the fact that the current way of distinguishing
between c) and d) is fragile.
The alternative solution is to test whether i_size is less than 60 to
determine fast symlink case. ext4_symlink() uses the same test to decide
whether to store the symlink in i_data. There is one caveat to address
before this can work though.
If an inode's i_nlink is zero during eviction, its i_size is set to
zero and its data is truncated. If system crashes before inode is removed
from the orphan list, next boot orphan cleanup may find the inode with
zero i_size. So, a symlink that had its data stored in a block may now
appear to be a fast symlink. The solution used in this patch is to treat
i_size = 0 as a non-fast symlink case. A zero sized symlink is not legal
so the only time this can happen is the mentioned scenario. This is also
logically correct because a i_size = 0 symlink has no data stored in
i_data.
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This makes it consistent with ->is_encrypted(), ->empty_dir(), and
fscrypt_dummy_context_enabled().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, filesystems allow truncate(2) on an encrypted file without
the encryption key. However, it's impossible to correctly handle the
case where the size being truncated to is not a multiple of the
filesystem block size, because that would require decrypting the final
block, zeroing the part beyond i_size, then encrypting the block.
As other modifications to encrypted file contents are prohibited without
the key, just prohibit truncate(2) as well, making it fail with ENOKEY.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since only an open file can be mmap'ed, and we only allow open()ing an
encrypted file when its key is available, there is no need to check for
the key again before permitting each mmap().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
kstrtoull returns 0 on success, however, in reserved_clusters_store we
will return -EINVAL if kstrtoull returns 0, it makes us fail to update
reserved_clusters value through sysfs.
Fixes: 76d33bca55
Cc: stable@vger.kernel.org # 4.4
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For 1k-block filesystems, the filesystem starts at block 1, not block 0.
This fact is recorded in s_first_data_block, so use that to bump up the
start_fsb before we start querying the filesystem for its space map.
Without this, ext4/026 fails on 1k block ext4 because various functions
(notably ext4_get_group_no_and_offset) don't know what to do with an
fsblock that is "before" the start of the filesystem and return garbage
results (blockgroup 2^32-1, etc.) that confuse fsmap.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously a bad directory block with a bad checksum is skipped; we
should be returning EFSBADCRC (aka EBADMSG).
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously, a read error would be ignored and we would eventually return
NULL from ext4_find_entry, which signals "no such file or directory". We
should be returning EIO.
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Currently it's possible to encrypt all files and directories on an ext4
filesystem by deleting everything, including lost+found, then setting an
encryption policy on the root directory. However, this is incompatible
with e2fsck because e2fsck expects to find, create, and/or write to
lost+found and does not have access to any encryption keys. Especially
problematic is that if e2fsck can't find lost+found, it will create it
without regard for whether the root directory is encrypted. This is
wrong for obvious reasons, and it causes a later run of e2fsck to
consider the lost+found directory entry to be corrupted.
Encrypting the root directory may also be of limited use because it is
the "all-or-nothing" use case, for which dm-crypt can be used instead.
(By design, encryption policies are inherited and cannot be overridden;
so the root directory having an encryption policy implies that all files
and directories on the filesystem have that same encryption policy.)
In any case, encrypting the root directory is broken currently and must
not be allowed; so start returning an error if userspace requests it.
For now only do this in ext4, because f2fs and ubifs do not appear to
have the lost+found requirement. We could move it into
fscrypt_ioctl_set_policy() later if desired, though.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Now, when we mount ext4 filesystem with '-o discard' option, we have to
issue all the discard commands for the blocks to be deallocated and
wait for the completion of the commands on the commit complete phase.
Because this procedure might involve a lot of sequential combinations of
issuing discard commands and waiting for that, the delay of this
procedure might be too much long, even to 17.0s in our test,
and it results in long commit delay and fsync() performance degradation.
To reduce this kind of delay, instead of adding callback for each
extent and handling all of them in a sequential manner on commit phase,
we instead add a separate list of extents to free to the superblock and
then process this list at once after transaction commits so that
we can issue all the discard commands in a parallel manner like XFS
filesystem.
Finally, we could enhance the discard command handling performance.
The result was such that 17.0s delay of a single commit in the worst
case has been enhanced to 4.8s.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Hobin Woo <hobin.woo@samsung.com>
Tested-by: Kitae Lee <kitae87.lee@samsung.com>
Reviewed-by: Jan Kara <jack@suse.cz>
These days inode reclaim calls evict_inode() only when it has no pages
in the mapping. In that case it is not necessary to wait for transaction
commit in ext4_evict_inode() as there can be no pages waiting to be
committed. So avoid unnecessary transaction waiting in that case.
We still have to keep the check for the case where ext4_evict_inode()
gets called from other paths (e.g. umount) where inode still can have
some page cache pages.
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The main purpose of mb cache is to achieve deduplication in
extended attributes. In use cases where opportunity for deduplication
is unlikely, it only adds overhead.
Add a mount option to explicitly turn off mb cache.
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To verify that a xattr entry is not pointing to the wrong xattr inode,
we currently check that the target inode has EXT4_EA_INODE_FL flag set and
also the entry size matches the target inode size.
For stronger validation, also incorporate crc32c hash of the value into
the e_hash field. This is done regardless of whether the entry lives in
the inode body or external attribute block.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When an extended attribute block is modified, ext4_xattr_hash_entry()
recalculates e_hash for the entry that is pointed by s->here. This is
unnecessary if the modification is to remove an entry.
Currently, if the removed entry is the last one and there are other
entries remaining, hash calculation targets the just erased entry which
has been filled with zeroes and effectively does nothing. If the removed
entry is not the last one and there are more entries, this time it will
recalculate hash on the next entry which is totally unnecessary.
Fix these by moving the decision on when to recalculate hash to
ext4_xattr_set_entry().
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
New ea_inode feature allows putting large xattr values into external
inodes. struct ext4_xattr_entry and the attribute name however have to
remain in the inode extra space or external attribute block. Once that
space is exhausted, no further entries can be added. Some of that space
could also be used by values that fit in there at the time of addition.
So, a single xattr entry whose value barely fits in the external block
could prevent further entries being added.
To mitigate the problem, this patch introduces a notion of reserved
space in the external attribute block that cannot be used by value data.
This reserve is enforced when ea_inode feature is enabled. The amount
of reserve is arbitrarily chosen to be min(block_size/8, 1024). The
table below shows how much space is reserved for each block size and the
guaranteed mininum number of entries that can be placed in the external
attribute block.
block size reserved bytes entries (name length = 16)
1k 128 3
2k 256 7
4k 512 15
8k 1024 31
16k 1024 31
32k 1024 31
64k 1024 31
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ext4 ea_inode feature allows storing xattr values in external inodes to
be able to store values that are bigger than a block in size. Ext4 also
has deduplication support for these type of inodes. With deduplication,
the actual storage waste is eliminated but the users of such inodes are
still charged full quota for the inodes as if there was no sharing
happening in the background.
This design requires ext4 to manually charge the users because the
inodes are shared.
An implication of this is that, if someone calls chown on a file that
has such references we need to transfer the quota for the file and xattr
inodes. Current dquot_transfer() function implicitly transfers one inode
charge. With ea_inode feature, we would like to transfer multiple inode
charges.
Add get_inode_usage callback which can interrogate the total number of
inodes that were charged for a given inode.
[ Applied fix from Colin King to make sure the 'ret' variable is
initialized on the successful return path. Detected by
CoverityScan, CID#1446616 ("Uninitialized scalar variable") --tytso]
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jan Kara <jack@suse.cz>
Ext4 now supports xattr values that are up to 64k in size (vfs limit).
Large xattr values are stored in external inodes each one holding a
single value. Once written the data blocks of these inodes are immutable.
The real world use cases are expected to have a lot of value duplication
such as inherited acls etc. To reduce data duplication on disk, this patch
implements a deduplicator that allows sharing of xattr inodes.
The deduplication is based on an in-memory hash lookup that is a best
effort sharing scheme. When a xattr inode is read from disk (i.e.
getxattr() call), its crc32c hash is added to a hash table. Before
creating a new xattr inode for a value being set, the hash table is
checked to see if an existing inode holds an identical value. If such an
inode is found, the ref count on that inode is incremented. On value
removal the ref count is decremented and if it reaches zero the inode is
deleted.
The quota charging for such inodes is manually managed. Every reference
holder is charged the full size as if there was no sharing happening.
This is consistent with how xattr blocks are also charged.
[ Fixed up journal credits calculation to handle inline data and the
rare case where an shared xattr block can get freed when two thread
race on breaking the xattr block sharing. --tytso ]
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
During inode deletion, the number of journal credits that will be
needed is hard to determine. For that reason we have journal
extend/restart calls in several places. Whenever a transaction is
restarted, filesystem must be in a consistent state because there is
no atomicity guarantee beyond a restart call.
Add ext4_xattr_ensure_credits() helper function which takes care of
journal extend/restart logic. It also handles getting jbd2 write
access and dirty metadata calls. This function is called at every
iteration of handling an ea_inode reference.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
IS_NOQUOTA() indicates whether quota is disabled for an inode. Ext4
also uses it to check whether an inode is for a quota file. The
distinction currently doesn't matter because quota is disabled only
for the quota files. When we start disabling quota for other inodes
in the future, we will want to make the distinction clear.
Replace IS_NOQUOTA() call with ext4_is_quota_file() at places where
we are checking for quota files.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There will be a second mb_cache instance that tracks ea_inodes. Make
existing names more explicit so that it is clear that they refer to
xattr block cache.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Make names more generic so that mbcache usage is not limited to
block sharing. In a subsequent patch in the series
("ext4: xattr inode deduplication"), we start using the mbcache code
for sharing xattr inodes. With that patch, old mb_cache_entry.e_block
field could be holding either a block number or an inode number.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since this is a xattr specific data structure it is cleaner to keep it in
xattr header file.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tracking struct inode * rather than the inode number eliminates the
repeated ext4_xattr_inode_iget() call later. The second call cannot
fail in practice but still requires explanation when it wants to ignore
the return value. Avoid the trouble and make things simple.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Both ext4_set_acl() and ext4_set_context() need to be made aware of
ea_inode feature when it comes to credits calculation.
Also add a sufficient credits check in ext4_xattr_set_handle() right
after xattr write lock is grabbed. Original credits calculation is done
outside the lock so there is a possiblity that the initially calculated
credits are not sufficient anymore.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In a few places the function returns without trying to pass the actual
error code to the caller. Fix those.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When value size is <= EXT4_XATTR_MIN_LARGE_EA_SIZE(), and it
doesn't fit in either inline or xattr block, a second try is made to
store it in an external inode while storing the entry itself in inline
area. There should also be an attempt to store the entry in xattr block.
This patch adds a retry loop to do that. It also makes the caller the
sole decider on whether to store a value in an external inode.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When there is no space for a value in xattr block, it may be stored
in an xattr inode even if the value length is less than
EXT4_XATTR_MIN_LARGE_EA_SIZE(). So the current assumption in credits
calculation is wrong.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When a xattr entry refers to an external inode, the value data is not
available in the inline area so we should not attempt to read it using
value offset.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When moving xattr entries from inline area to a xattr block, entries
that refer to external xattr inodes need special handling because
value data is not available in the inline area but rather should be
read from its external inode.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_xattr_make_inode_space() is interested in calculating the inline
space used in an inode. When a xattr entry refers to an external inode
the value size indicates the external inode size, not the value size in
the inline area. Change the function to take this into account.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_xattr_value_same() is used as a quick optimization in case the new
xattr value is identical to the previous value. When xattr value is
stored in a xattr inode the check becomes expensive so it is better to
just assume that they are not equal.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Two places in code missed converting xattr inode number using
le32_to_cpu().
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The input and output values of *size parameter are equal on successful
return from ext4_xattr_inode_get(). On error return, the callers ignore
the output value so there is no need to update it.
Also check for NULL return from ext4_bread(). If the actual xattr inode
size happens to be smaller than the expected size, ext4_bread() may
return NULL which would indicate data corruption.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In general, kernel functions indicate success/failure through their return
values. This function returns the status as an output parameter and reserves
the return value for the inode. Make it follow the general convention.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
EXT4_XATTR_MAX_LARGE_EA_SIZE definition in ext4 is currently unused.
Besides, vfs enforces its own 64k limit which makes the 1MB limit in
ext4 redundant. Remove it.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The ref count on ea_inode is incremented by
ext4_xattr_inode_orphan_add() which is supposed to be decremented by
ext4_xattr_inode_array_free(). The decrement is conditioned on whether
the ea_inode is currently on the orphan list. However, the orphan list
addition only happens when journaling is enabled. In non-journaled case,r
we fail to release the ref count causing an error message like below.
"VFS: Busy inodes after unmount of sdb. Self-destruct in 5 seconds.
Have a nice day..."
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ea_inode contents are treated as metadata, that's why it is journaled
during initial writes. Failing to call revoke during freeing could cause
user data to be overwritten with original ea_inode contents during journal
replay.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Quota charging is based on the ownership of the inode. Currently, the
xattr inode owner is set to the caller which may be different from the
parent inode owner. This is inconsistent with how quota is charged for
xattr block and regular data block writes.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We don't need acls on xattr inodes because they are not directly
accessible from user mode.
Besides lockdep complains about recursive locking of xattr_sem as seen
below.
=============================================
[ INFO: possible recursive locking detected ]
4.11.0-rc8+ #402 Not tainted
---------------------------------------------
python/1894 is trying to acquire lock:
(&ei->xattr_sem){++++..}, at: [<ffffffff804878a6>] ext4_xattr_get+0x66/0x270
but task is already holding lock:
(&ei->xattr_sem){++++..}, at: [<ffffffff80489500>] ext4_xattr_set_handle+0xa0/0x5d0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ei->xattr_sem);
lock(&ei->xattr_sem);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by python/1894:
#0: (sb_writers#10){.+.+.+}, at: [<ffffffff803d829f>] mnt_want_write+0x1f/0x50
#1: (&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffff803dda27>] vfs_setxattr+0x57/0xb0
#2: (&ei->xattr_sem){++++..}, at: [<ffffffff80489500>] ext4_xattr_set_handle+0xa0/0x5d0
stack backtrace:
CPU: 0 PID: 1894 Comm: python Not tainted 4.11.0-rc8+ #402
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x67/0x99
__lock_acquire+0x5f3/0x1830
lock_acquire+0xb5/0x1d0
down_read+0x2f/0x60
ext4_xattr_get+0x66/0x270
ext4_get_acl+0x43/0x1e0
get_acl+0x72/0xf0
posix_acl_create+0x5e/0x170
ext4_init_acl+0x21/0xc0
__ext4_new_inode+0xffd/0x16b0
ext4_xattr_set_entry+0x5ea/0xb70
ext4_xattr_block_set+0x1b5/0x970
ext4_xattr_set_handle+0x351/0x5d0
ext4_xattr_set+0x124/0x180
ext4_xattr_user_set+0x34/0x40
__vfs_setxattr+0x66/0x80
__vfs_setxattr_noperm+0x69/0x1c0
vfs_setxattr+0xa2/0xb0
setxattr+0x129/0x160
path_setxattr+0x87/0xb0
SyS_setxattr+0xf/0x20
entry_SYSCALL_64_fastpath+0x18/0xad
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Setting a large xattr value may require writing the attribute contents
to an external inode. In this case we may need to lock the xattr inode
along with the parent inode. This doesn't pose a deadlock risk because
xattr inodes are not directly visible to the user and their access is
restricted.
Assign a lockdep subclass to xattr inode's lock.
============================================
WARNING: possible recursive locking detected
4.12.0-rc1+ #740 Not tainted
--------------------------------------------
python/1822 is trying to acquire lock:
(&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffff804912ca>] ext4_xattr_set_entry+0x65a/0x7b0
but task is already holding lock:
(&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffff803d6687>] vfs_setxattr+0x57/0xb0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&sb->s_type->i_mutex_key#15);
lock(&sb->s_type->i_mutex_key#15);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by python/1822:
#0: (sb_writers#10){.+.+.+}, at: [<ffffffff803d0eef>] mnt_want_write+0x1f/0x50
#1: (&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffff803d6687>] vfs_setxattr+0x57/0xb0
#2: (jbd2_handle){.+.+..}, at: [<ffffffff80493f40>] start_this_handle+0xf0/0x420
#3: (&ei->xattr_sem){++++..}, at: [<ffffffff804920ba>] ext4_xattr_set_handle+0x9a/0x4f0
stack backtrace:
CPU: 0 PID: 1822 Comm: python Not tainted 4.12.0-rc1+ #740
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x67/0x9e
__lock_acquire+0x5f3/0x1750
lock_acquire+0xb5/0x1d0
down_write+0x2c/0x60
ext4_xattr_set_entry+0x65a/0x7b0
ext4_xattr_block_set+0x1b2/0x9b0
ext4_xattr_set_handle+0x322/0x4f0
ext4_xattr_set+0x144/0x1a0
ext4_xattr_user_set+0x34/0x40
__vfs_setxattr+0x66/0x80
__vfs_setxattr_noperm+0x69/0x1c0
vfs_setxattr+0xa2/0xb0
setxattr+0x12e/0x150
path_setxattr+0x87/0xb0
SyS_setxattr+0xf/0x20
entry_SYSCALL_64_fastpath+0x18/0xad
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Large xattr support is implemented for EXT4_FEATURE_INCOMPAT_EA_INODE.
If the size of an xattr value is larger than will fit in a single
external block, then the xattr value will be saved into the body
of an external xattr inode.
The also helps support a larger number of xattr, since only the headers
will be stored in the in-inode space or the single external block.
The inode is referenced from the xattr header via "e_value_inum",
which was formerly "e_value_block", but that field was never used.
The e_value_size still contains the xattr size so that listing
xattrs does not need to look up the inode if the data is not accessed.
struct ext4_xattr_entry {
__u8 e_name_len; /* length of name */
__u8 e_name_index; /* attribute name index */
__le16 e_value_offs; /* offset in disk block of value */
__le32 e_value_inum; /* inode in which value is stored */
__le32 e_value_size; /* size of attribute value */
__le32 e_hash; /* hash value of name and value */
char e_name[0]; /* attribute name */
};
The xattr inode is marked with the EXT4_EA_INODE_FL flag and also
holds a back-reference to the owning inode in its i_mtime field,
allowing the ext4/e2fsck to verify the correct inode is accessed.
[ Applied fix by Dan Carpenter to avoid freeing an ERR_PTR. ]
Lustre-Jira: https://jira.hpdd.intel.com/browse/LU-80
Lustre-bugzilla: https://bugzilla.lustre.org/show_bug.cgi?id=4424
Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: James Simmons <uja.ornl@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
This INCOMPAT_LARGEDIR feature allows larger directories to be created
in ldiskfs, both with directory sizes over 2GB and and a maximum htree
depth of 3 instead of the current limit of 2. These features are needed
in order to exceed the current limit of approximately 10M entries in a
single directory.
This patch was originally written by Yang Sheng to support the Lustre server.
[ Bumped the credits needed to update an indexed directory -- tytso ]
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Signed-off-by: Artem Blagodarenko <artem.blagodarenko@seagate.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Return EAGAIN if any of the following checks fail for direct I/O:
+ i_rwsem is lockable
+ Writing beyond end of file (will trigger allocation)
+ Blocks are not allocated at the write location
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZPdbLAAoJEHm+PkMAQRiGx4wH/1nCjfnl6fE8oJ24/1gEAOUh
biFdqJkYZmlLYHVtYfLm4Ueg4adJdg0wx6qM/4RaAzmQVvLfDV34bc1qBf1+P95G
kVF+osWyXrZo5cTwkwapHW/KNu4VJwAx2D1wrlxKDVG5AOrULH1pYOYGOpApEkZU
4N+q5+M0ce0GJpqtUZX+UnI33ygjdDbBxXoFKsr24B7eA0ouGbAJ7dC88WcaETL+
2/7tT01SvDMo0jBSV0WIqlgXwZ5gp3yPGnklC3F4159Yze6VFrzHMKS/UpPF8o8E
W9EbuzwxsKyXUifX2GY348L1f+47glen/1sedbuKnFhP6E9aqUQQJXvEO7ueQl4=
=m2Gx
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rc5' into for-4.13/block
We've already got a few conflicts and upcoming work depends on some of the
changes that have gone into mainline as regression fixes for this series.
Pull in 4.12-rc5 to resolve these conflicts and make it easier on down stream
trees to continue working on 4.13 changes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
For some file systems we still memcpy into it, but in various places this
already allows us to use the proper uuid helpers. More to come..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> (Changes to IMA/EVM)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Currently, extent manipulation operations such as hole punch, range
zeroing, or extent shifting do not record the fact that file data has
changed and thus fdatasync(2) has a work to do. As a result if we crash
e.g. after a punch hole and fdatasync, user can still possibly see the
punched out data after journal replay. Test generic/392 fails due to
these problems.
Fix the problem by properly marking that file data has changed in these
operations.
CC: stable@vger.kernel.org
Fixes: a4bb6b64e3
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
mpage_submit_page() can race with another process growing i_size and
writing data via mmap to the written-back page. As mpage_submit_page()
samples i_size too early, it may happen that ext4_bio_write_page()
zeroes out too large tail of the page and thus corrupts user data.
Fix the problem by sampling i_size only after the page has been
write-protected in page tables by clear_page_dirty_for_io() call.
Reported-by: Michael Zimmer <michael@swarm64.com>
CC: stable@vger.kernel.org
Fixes: cb20d51883
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out
allocated blocks and these blocks are actually converted from unwritten
extent the following race can happen:
CPU0 CPU1
page fault page fault
... ...
ext4_map_blocks()
ext4_ext_map_blocks()
ext4_ext_handle_unwritten_extents()
ext4_ext_convert_to_initialized()
- zero out converted extent
ext4_zeroout_es()
- inserts extent as initialized in status tree
ext4_map_blocks()
ext4_es_lookup_extent()
- finds initialized extent
write data
ext4_issue_zeroout()
- zeroes out new extent overwriting data
This problem can be reproduced by generic/340 for the fallocated case
for the last block in the file.
Fix the problem by avoiding zeroing out the area we are mapping with
ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless
to zero out this area in the first place as the caller asked us to
convert the area to initialized because he is just going to write data
there before the transaction finishes. To achieve this we delete the
special case of zeroing out full extent as that will be handled by the
cases below zeroing only the part of the extent that needs it. We also
instruct ext4_split_extent() that the middle of extent being split
contains data so that ext4_split_extent_at() cannot zero out full extent
in case of ENOSPC.
CC: stable@vger.kernel.org
Fixes: 12735f8819
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_xattr_block_set() calls dquot_alloc_block() to charge for an xattr
block when new references are made. However if dquot_initialize() hasn't
been called on an inode, request for charging is effectively ignored
because ext4_inode_info->i_dquot is not initialized yet.
Add dquot_initialize() to call paths that lead to ext4_xattr_block_set().
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Currently we don't allow direct I/O on encrypted regular files, so in
such cases we return 0 early in ext4_direct_IO(). There was also an
additional BUG_ON() check in ext4_direct_IO_write(), but it can never be
hit because of the earlier check for the exact same condition in
ext4_direct_IO(). There was also no matching check on the read path,
which made the write path specific check seem very ad-hoc.
Just remove the unnecessary BUG_ON().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: David Gstir <david@sigma-star.at>
Reviewed-by: Jan Kara <jack@suse.cz>
Now that we are passing a struct ext4_filename, we do not need to pass
around the original struct qstr too.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
The 'lend' argument of filemap_write_and_wait_range() is inclusive, so
we need to subtract 1 from pos + count.
Note that 'count' is guaranteed to be nonzero since
ext4_file_read_iter() returns early when given a 0 count.
Fixes: 16c5468859 ("ext4: Allow parallel DIO reads")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
ext4_find_unwritten_pgoff() is used to search for offset of hole or
data in page range [index, end] (both inclusive), and the max number
of pages to search should be at least one, if end == index.
Otherwise the only page is missed and no hole or data is found,
which is not correct.
When block size is smaller than page size, this can be demonstrated
by preallocating a file with size smaller than page size and writing
data to the last block. E.g. run this xfs_io command on a 1k block
size ext4 on x86_64 host.
# xfs_io -fc "falloc 0 3k" -c "pwrite 2k 1k" \
-c "seek -d 0" /mnt/ext4/testfile
wrote 1024/1024 bytes at offset 2048
1 KiB, 1 ops; 0.0000 sec (42.459 MiB/sec and 43478.2609 ops/sec)
Whence Result
DATA EOF
Data at offset 2k was missed, and lseek(2) returned ENXIO.
This is unconvered by generic/285 subtest 07 and 08 on ppc64 host,
where pagesize is 64k. Because a recent change to generic/285
reduced the preallocated file size to smaller than 64k.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
ext4_expand_extra_isize() should clear only space between old and new
size.
Fixes: 6dd4ee7cab # v2.6.23
Cc: stable@vger.kernel.org
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
I've got another report about breaking ext4 by ENOMEM error returned from
ext4_mb_load_buddy() caused by memory shortage in memory cgroup.
This time inside ext4_discard_preallocations().
This patch replaces ext4_error() with ext4_warning() where errors returned
from ext4_mb_load_buddy() are not fatal and handled by caller:
* ext4_mb_discard_group_preallocations() - called before generating ENOSPC,
we'll try to discard other group or return ENOSPC into user-space.
* ext4_trim_all_free() - just stop trimming and return ENOMEM from ioctl.
Some callers cannot handle errors, thus __GFP_NOFAIL is used for them:
* ext4_discard_preallocations()
* ext4_mb_discard_lg_preallocations()
Fixes: adb7ef600c ("ext4: use __GFP_NOFAIL in ext4_free_blocks()")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is an off-by-one error in loop termination conditions in
ext4_find_unwritten_pgoff() since 'end' may index a page beyond end of
desired range if 'endoff' is page aligned. It doesn't have any visible
effects but still it is good to fix it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, SEEK_HOLE implementation in ext4 may both return that there's
a hole at some offset although that offset already has data and skip
some holes during a search for the next hole. The first problem is
demostrated by:
xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "seek -h 0" file
wrote 57344/57344 bytes at offset 0
56 KiB, 14 ops; 0.0000 sec (2.054 GiB/sec and 538461.5385 ops/sec)
Whence Result
HOLE 0
Where we can see that SEEK_HOLE wrongly returned offset 0 as containing
a hole although we have written data there. The second problem can be
demonstrated by:
xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "pwrite 128k 8k"
-c "seek -h 0" file
wrote 57344/57344 bytes at offset 0
56 KiB, 14 ops; 0.0000 sec (1.978 GiB/sec and 518518.5185 ops/sec)
wrote 8192/8192 bytes at offset 131072
8 KiB, 2 ops; 0.0000 sec (2 GiB/sec and 500000.0000 ops/sec)
Whence Result
HOLE 139264
Where we can see that hole at offsets 56k..128k has been ignored by the
SEEK_HOLE call.
The underlying problem is in the ext4_find_unwritten_pgoff() which is
just buggy. In some cases it fails to update returned offset when it
finds a hole (when no pages are found or when the first found page has
higher index than expected), in some cases conditions for detecting hole
are just missing (we fail to detect a situation where indices of
returned pages are not contiguous).
Fix ext4_find_unwritten_pgoff() to properly detect non-contiguous page
indices and also handle all cases where we got less pages then expected
in one place and handle it properly there.
CC: stable@vger.kernel.org
Fixes: c8c0df241c
CC: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Quota files have special ranking of i_data_sem lock. We inform lockdep
about it when turning on quotas however when turning quotas off, we
don't clear the lockdep subclass from i_data_sem lock and thus when the
inode gets later reused for a normal file or directory, lockdep gets
confused and complains about possible deadlocks. Fix the problem by
resetting lockdep subclass of i_data_sem on quota off.
Cc: stable@vger.kernel.org
Fixes: daf647d2dd
Reported-and-tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tetsuo reports:
fs/built-in.o: In function `xfs_file_iomap_end':
xfs_iomap.c:(.text+0xe0ef9): undefined reference to `put_dax'
fs/built-in.o: In function `xfs_file_iomap_begin':
xfs_iomap.c:(.text+0xe1a7f): undefined reference to `dax_get_by_host'
make: *** [vmlinux] Error 1
$ grep DAX .config
CONFIG_DAX=m
# CONFIG_DEV_DAX is not set
# CONFIG_FS_DAX is not set
When FS_DAX=n we can/must throw away the dax code in filesystems.
Implement 'fs_' versions of dax_get_by_host() and put_dax() that are
nops in the FS_DAX=n case.
Cc: <linux-xfs@vger.kernel.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: Jan Kara <jack@suse.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Fixes: ef51042472 ("block, dax: move 'select DAX' from BLOCK to FS_DAX")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge misc fixes from Andrew Morton:
"15 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, docs: update memory.stat description with workingset* entries
mm: vmscan: scan until it finds eligible pages
mm, thp: copying user pages must schedule on collapse
dax: fix PMD data corruption when fault races with write
dax: fix data corruption when fault races with write
ext4: return to starting transaction in ext4_dax_huge_fault()
mm: fix data corruption due to stale mmap reads
dax: prevent invalidation of mapped DAX entries
Tigran has moved
mm, vmalloc: fix vmalloc users tracking properly
mm/khugepaged: add missed tracepoint for collapse_huge_page_swapin
gcov: support GCC 7.1
mm, vmstat: Remove spurious WARN() during zoneinfo print
time: delete current_fs_time()
hwpoison, memcg: forcibly uncharge LRU pages
DAX will return to locking exceptional entry before mapping blocks for a
page fault to fix possible races with concurrent writes. To avoid lock
inversion between exceptional entry lock and transaction start, start
the transaction already in ext4_dax_huge_fault().
Fixes: 9f141d6ef6
Link: http://lkml.kernel.org/r/20170510085419.27601-4-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull libnvdimm fixes from Dan Williams:
"Incremental fixes and a small feature addition on top of the main
libnvdimm 4.12 pull request:
- Geert noticed that tinyconfig was bloated by BLOCK selecting DAX.
The size regression is fixed by moving all dax helpers into the
dax-core and only specifying "select DAX" for FS_DAX and
dax-capable drivers. He also asked for clarification of the
NR_DEV_DAX config option which, on closer look, does not need to be
a config option at all. Mike also throws in a DEV_DAX_PMEM fixup
for good measure.
- Ben's attention to detail on -stable patch submissions caught a
case where the recent fixes to arch_copy_from_iter_pmem() missed a
condition where we strand dirty data in the cache. This is tagged
for -stable and will also be included in the rework of the pmem api
to a proposed {memcpy,copy_user}_flushcache() interface for 4.13.
- Vishal adds a feature that missed the initial pull due to pending
review feedback. It allows the kernel to clear media errors when
initializing a BTT (atomic sector update driver) instance on a pmem
namespace.
- Ross noticed that the dax_device + dax_operations conversion broke
__dax_zero_page_range(). The nvdimm unit tests fail to check this
path, but xfstests immediately trips over it. No excuse for missing
this before submitting the 4.12 pull request.
These all pass the nvdimm unit tests and an xfstests spot check. The
set has received a build success notification from the kbuild robot"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
filesystem-dax: fix broken __dax_zero_page_range() conversion
libnvdimm, btt: ensure that initializing metadata clears poison
libnvdimm: add an atomic vs process context flag to rw_bytes
x86, pmem: Fix cache flushing for iovec write < 8 bytes
device-dax: kill NR_DEV_DAX
block, dax: move "select DAX" from BLOCK to FS_DAX
device-dax: Tell kbuild DEV_DAX_PMEM depends on DEV_DAX
Merge more updates from Andrew Morton:
- the rest of MM
- various misc things
- procfs updates
- lib/ updates
- checkpatch updates
- kdump/kexec updates
- add kvmalloc helpers, use them
- time helper updates for Y2038 issues. We're almost ready to remove
current_fs_time() but that awaits a btrfs merge.
- add tracepoints to DAX
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits)
drivers/staging/ccree/ssi_hash.c: fix build with gcc-4.4.4
selftests/vm: add a test for virtual address range mapping
dax: add tracepoint to dax_insert_mapping()
dax: add tracepoint to dax_writeback_one()
dax: add tracepoints to dax_writeback_mapping_range()
dax: add tracepoints to dax_load_hole()
dax: add tracepoints to dax_pfn_mkwrite()
dax: add tracepoints to dax_iomap_pte_fault()
mtd: nand: nandsim: convert to memalloc_noreclaim_*()
treewide: convert PF_MEMALLOC manipulations to new helpers
mm: introduce memalloc_noreclaim_{save,restore}
mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC
mm/huge_memory.c: deposit a pgtable for DAX PMD faults when required
mm/huge_memory.c: use zap_deposited_table() more
time: delete CURRENT_TIME_SEC and CURRENT_TIME
gfs2: replace CURRENT_TIME with current_time
apparmorfs: replace CURRENT_TIME with current_time()
lustre: replace CURRENT_TIME macro
fs: ubifs: replace CURRENT_TIME_SEC with current_time
fs: ufs: use ktime_get_real_ts64() for birthtime
...
Patch series "kvmalloc", v5.
There are many open coded kmalloc with vmalloc fallback instances in the
tree. Most of them are not careful enough or simply do not care about
the underlying semantic of the kmalloc/page allocator which means that
a) some vmalloc fallbacks are basically unreachable because the kmalloc
part will keep retrying until it succeeds b) the page allocator can
invoke a really disruptive steps like the OOM killer to move forward
which doesn't sound appropriate when we consider that the vmalloc
fallback is available.
As it can be seen implementing kvmalloc requires quite an intimate
knowledge if the page allocator and the memory reclaim internals which
strongly suggests that a helper should be implemented in the memory
subsystem proper.
Most callers, I could find, have been converted to use the helper
instead. This is patch 6. There are some more relying on __GFP_REPEAT
in the networking stack which I have converted as well and Eric Dumazet
was not opposed [2] to convert them as well.
[1] http://lkml.kernel.org/r/20170130094940.13546-1-mhocko@kernel.org
[2] http://lkml.kernel.org/r/1485273626.16328.301.camel@edumazet-glaptop3.roam.corp.google.com
This patch (of 9):
Using kmalloc with the vmalloc fallback for larger allocations is a
common pattern in the kernel code. Yet we do not have any common helper
for that and so users have invented their own helpers. Some of them are
really creative when doing so. Let's just add kv[mz]alloc and make sure
it is implemented properly. This implementation makes sure to not make
a large memory pressure for > PAGE_SZE requests (__GFP_NORETRY) and also
to not warn about allocation failures. This also rules out the OOM
killer as the vmalloc is a more approapriate fallback than a disruptive
user visible action.
This patch also changes some existing users and removes helpers which
are specific for them. In some cases this is not possible (e.g.
ext4_kvmalloc, libcfs_kvzalloc) because those seems to be broken and
require GFP_NO{FS,IO} context which is not vmalloc compatible in general
(note that the page table allocation is GFP_KERNEL). Those need to be
fixed separately.
While we are at it, document that __vmalloc{_node} about unsupported gfp
mask because there seems to be a lot of confusion out there.
kvmalloc_node will warn about GFP_KERNEL incompatible (which are not
superset) flags to catch new abusers. Existing ones would have to die
slowly.
[sfr@canb.auug.org.au: f2fs fixup]
Link: http://lkml.kernel.org/r/20170320163735.332e64b7@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170306103032.2540-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Andreas Dilger <adilger@dilger.ca> [ext4 part]
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlkPYHkACgkQ8vlZVpUN
gaM97ggAlOm8n/tlbcdonX/+HHjlnqcy5uYD7A9AH/JordpRzy4eqcMbxMG39p1R
DBtjo9Y0i3iFEGajRc0h7KXDLeTBUQ/JZpR8H60MFfAQHnTowuI91eb3/6QeZiHh
CN/2KKzpYitPIEUfEHnVeYKOfvrzR7je5hrEiAwEkPeKv7XyrNVM0LHQ/jKpbQwg
ntIzHvxjQyo8plx/m5S4Yew7tqjYpNiq4plmyk/Vxtw2FmB/FC76UxYeadoB3EI5
etw+bCORB0tFZO27o56kXywg+mDcp7HEtVvq9LG28oEuBDAVKNoeKEvV7SiOBlZp
+HnqIz5Hx1UTxOlTAc10IjvEhriEuw==
=qCDl
-----END PGP SIGNATURE-----
Merge tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Only bug fixes and cleanups for this merge window"
* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: correct collision claim for digested names
MAINTAINERS: fscrypt: update mailing list, patchwork, and git
ext4: clean up ext4_match() and callers
f2fs: switch to using fscrypt_match_name()
ext4: switch to using fscrypt_match_name()
fscrypt: introduce helper function for filename matching
fscrypt: avoid collisions when presenting long encrypted filenames
f2fs: check entire encrypted bigname when finding a dentry
ubifs: check for consistent encryption contexts in ubifs_lookup()
f2fs: sync f2fs_lookup() with ext4_lookup()
ext4: remove "nokey" check from ext4_lookup()
fscrypt: fix context consistency check when key(s) unavailable
fscrypt: Remove __packed from fscrypt_policy
fscrypt: Move key structure and constants to uapi
fscrypt: remove fscrypt_symlink_data_len()
fscrypt: remove unnecessary checks for NULL operations
file systems and for random write workloads into a preallocated file;
bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlkPYB8ACgkQ8vlZVpUN
gaP1HwgApoMQGegtRIbCZKUzKBJ2S6vwIoPAMz62JuwngOyWygJ1T1TliKTitG04
XvijKpUHtEggMO/ZsUOCoyr2LzJlpVvvrJZsavEubO12LKreYMpvNraZF1GACYTb
lIZpdWkpcEz5WnPV/PXW/dEMcSMhnKe8tbmHXMyAouSC6a55F5Wp456KF/plqkHU
zkWTCDbEOtHThzpL8cthUL71ji62I3Op5jn/qOfKCm6/JtUlw5pYjWkRUNqqjSQE
uQqMpqLxI/VjOdEiBPxEF6A+ZudZmoBQKY15ibWCcHUPFOPqk4RdYz6VivRI7zrg
KrrKcdFT29MtKnRfAAoJcc0nJ4e1Iw==
=il74
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
- add GETFSMAP support
- some performance improvements for very large file systems and for
random write workloads into a preallocated file
- bug fixes and cleanups.
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: cleanup write flags handling from jbd2_write_superblock()
ext4: mark superblock writes synchronous for nobarrier mounts
ext4: inherit encryption xattr before other xattrs
ext4: replace BUG_ON with WARN_ONCE in ext4_end_bio()
ext4: avoid unnecessary transaction stalls during writeback
ext4: preload block group descriptors
ext4: make ext4_shutdown() static
ext4: support GETFSMAP ioctls
vfs: add common GETFSMAP ioctl definitions
ext4: evict inline data when writing to memory map
ext4: remove ext4_xattr_check_entry()
ext4: rename ext4_xattr_check_names() to ext4_xattr_check_entries()
ext4: merge ext4_xattr_list() into ext4_listxattr()
ext4: constify static data that is never modified
ext4: trim return value and 'dir' argument from ext4_insert_dentry()
jbd2: fix dbench4 performance regression for 'nobarrier' mounts
jbd2: Fix lockdep splat with generic/270 test
mm: retry writepages() on ENOMEM when doing an data integrity writeback
For configurations that do not enable DAX filesystems or drivers, do not
require the DAX core to be built.
Given that the 'direct_access' method has been removed from
'block_device_operations', we can also go ahead and remove the
block-related dax helper functions from fs/block_dev.c to
drivers/dax/super.c. This keeps dax details out of the block layer and
lets the DAX core be built as a module in the FS_DAX=n case.
Filesystems need to include dax.h to call bdev_dax_supported().
Cc: linux-xfs@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* Region media error reporting: A libnvdimm region device is the parent
to one or more namespaces. To date, media errors have been reported via
the "badblocks" attribute attached to pmem block devices for namespaces
in "raw" or "memory" mode. Given that namespaces can be in "device-dax"
or "btt-sector" mode this new interface reports media errors
generically, i.e. independent of namespace modes or state. This
subsequently allows userspace tooling to craft "ACPI 6.1 Section
9.20.7.6 Function Index 4 - Clear Uncorrectable Error" requests and
submit them via the ioctl path for NVDIMM root bus devices.
* Introduce 'struct dax_device' and 'struct dax_operations': Prompted by
a request from Linus and feedback from Christoph this allows for dax
capable drivers to publish their own custom dax operations. This fixes
the broken assumption that all dax operations are related to a
persistent memory device, and makes it easier for other architectures
and platforms to add customized persistent memory support.
* 'libnvdimm' core updates: A new "deep_flush" sysfs attribute is
available for storage appliance applications to manually trigger memory
controllers to drain write-pending buffers that would otherwise be
flushed automatically by the platform ADR (asynchronous-DRAM-refresh)
mechanism at a power loss event. Support for "locked" DIMMs is included
to prevent namespaces from surfacing when the namespace label data area
is locked. Finally, fixes for various reported deadlocks and crashes,
also tagged for -stable.
* ACPI / nfit driver updates: General updates of the nfit driver to add
DSM command overrides, ACPI 6.1 health state flags support, DSM payload
debug available by default, and various fixes.
Acknowledgements that came after the branch was pushed:
commmit 565851c972 "device-dax: fix sysfs attribute deadlock"
Tested-by: Yi Zhang <yizhan@redhat.com>
commit 23f4984483 "libnvdimm: rework region badblocks clearing"
Tested-by: Toshi Kani <toshi.kani@hpe.com>
-----BEGIN PGP SIGNATURE-----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=Ox0s
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The bulk of this has been in multiple -next releases. There were a few
late breaking fixes and small features that got added in the last
couple days, but the whole set has received a build success
notification from the kbuild robot.
Change summary:
- Region media error reporting: A libnvdimm region device is the
parent to one or more namespaces. To date, media errors have been
reported via the "badblocks" attribute attached to pmem block
devices for namespaces in "raw" or "memory" mode. Given that
namespaces can be in "device-dax" or "btt-sector" mode this new
interface reports media errors generically, i.e. independent of
namespace modes or state.
This subsequently allows userspace tooling to craft "ACPI 6.1
Section 9.20.7.6 Function Index 4 - Clear Uncorrectable Error"
requests and submit them via the ioctl path for NVDIMM root bus
devices.
- Introduce 'struct dax_device' and 'struct dax_operations': Prompted
by a request from Linus and feedback from Christoph this allows for
dax capable drivers to publish their own custom dax operations.
This fixes the broken assumption that all dax operations are
related to a persistent memory device, and makes it easier for
other architectures and platforms to add customized persistent
memory support.
- 'libnvdimm' core updates: A new "deep_flush" sysfs attribute is
available for storage appliance applications to manually trigger
memory controllers to drain write-pending buffers that would
otherwise be flushed automatically by the platform ADR
(asynchronous-DRAM-refresh) mechanism at a power loss event.
Support for "locked" DIMMs is included to prevent namespaces from
surfacing when the namespace label data area is locked. Finally,
fixes for various reported deadlocks and crashes, also tagged for
-stable.
- ACPI / nfit driver updates: General updates of the nfit driver to
add DSM command overrides, ACPI 6.1 health state flags support, DSM
payload debug available by default, and various fixes.
Acknowledgements that came after the branch was pushed:
- commmit 565851c972 "device-dax: fix sysfs attribute deadlock":
Tested-by: Yi Zhang <yizhan@redhat.com>
- commit 23f4984483 "libnvdimm: rework region badblocks clearing"
Tested-by: Toshi Kani <toshi.kani@hpe.com>"
* tag 'libnvdimm-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (52 commits)
libnvdimm, pfn: fix 'npfns' vs section alignment
libnvdimm: handle locked label storage areas
libnvdimm: convert NDD_ flags to use bitops, introduce NDD_LOCKED
brd: fix uninitialized use of brd->dax_dev
block, dax: use correct format string in bdev_dax_supported
device-dax: fix sysfs attribute deadlock
libnvdimm: restore "libnvdimm: band aid btt vs clear poison locking"
libnvdimm: fix nvdimm_bus_lock() vs device_lock() ordering
libnvdimm: rework region badblocks clearing
acpi, nfit: kill ACPI_NFIT_DEBUG
libnvdimm: fix clear length of nvdimm_forget_poison()
libnvdimm, pmem: fix a NULL pointer BUG in nd_pmem_notify
libnvdimm, region: sysfs trigger for nvdimm_flush()
libnvdimm: fix phys_addr for nvdimm_clear_poison
x86, dax, pmem: remove indirection around memcpy_from_pmem()
block: remove block_device_operations ->direct_access()
block, dax: convert bdev_dax_supported() to dax_direct_access()
filesystem-dax: convert to dax_direct_access()
Revert "block: use DAX for partition table reads"
ext2, ext4, xfs: retrieve dax_device for iomap operations
...
When ext4 encryption was originally merged, we were encrypting the
user-specified filename in ext4_match(), introducing a lot of additional
complexity into ext4_match() and its callers. This has since been
changed to encrypt the filename earlier, so we can remove the gunk
that's no longer needed. This more or less reverts ext4_search_dir()
and ext4_find_dest_de() to the way they were in the v4.0 kernel.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Switch ext4 directory searches to use the fscrypt_match_name() helper
function. There should be no functional change.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When accessing an encrypted directory without the key, userspace must
operate on filenames derived from the ciphertext names, which contain
arbitrary bytes. Since we must support filenames as long as NAME_MAX,
we can't always just base64-encode the ciphertext, since that may make
it too long. Currently, this is solved by presenting long names in an
abbreviated form containing any needed filesystem-specific hashes (e.g.
to identify a directory block), then the last 16 bytes of ciphertext.
This needs to be sufficient to identify the actual name on lookup.
However, there is a bug. It seems to have been assumed that due to the
use of a CBC (ciphertext block chaining)-based encryption mode, the last
16 bytes (i.e. the AES block size) of ciphertext would depend on the
full plaintext, preventing collisions. However, we actually use CBC
with ciphertext stealing (CTS), which handles the last two blocks
specially, causing them to appear "flipped". Thus, it's actually the
second-to-last block which depends on the full plaintext.
This caused long filenames that differ only near the end of their
plaintexts to, when observed without the key, point to the wrong inode
and be undeletable. For example, with ext4:
# echo pass | e4crypt add_key -p 16 edir/
# seq -f "edir/abcdefghijklmnopqrstuvwxyz012345%.0f" 100000 | xargs touch
# find edir/ -type f | xargs stat -c %i | sort | uniq | wc -l
100000
# sync
# echo 3 > /proc/sys/vm/drop_caches
# keyctl new_session
# find edir/ -type f | xargs stat -c %i | sort | uniq | wc -l
2004
# rm -rf edir/
rm: cannot remove 'edir/_A7nNFi3rhkEQlJ6P,hdzluhODKOeWx5V': Structure needs cleaning
...
To fix this, when presenting long encrypted filenames, encode the
second-to-last block of ciphertext rather than the last 16 bytes.
Although it would be nice to solve this without depending on a specific
encryption mode, that would mean doing a cryptographic hash like SHA-256
which would be much less efficient. This way is sufficient for now, and
it's still compatible with encryption modes like HEH which are strong
pseudorandom permutations. Also, changing the presented names is still
allowed at any time because they are only provided to allow applications
to do things like delete encrypted directories. They're not designed to
be used to persistently identify files --- which would be hard to do
anyway, given that they're encrypted after all.
For ease of backports, this patch only makes the minimal fix to both
ext4 and f2fs. It leaves ubifs as-is, since ubifs doesn't compare the
ciphertext block yet. Follow-on patches will clean things up properly
and make the filesystems use a shared helper function.
Fixes: 5de0b4d0cd ("ext4 crypto: simplify and speed up filename encryption")
Reported-by: Gwendal Grignou <gwendal@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that fscrypt_has_permitted_context() correctly handles the case
where we have the key for the parent directory but not the child, we
don't need to try to work around this in ext4_lookup().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit b685d3d65a "block: treat REQ_FUA and REQ_PREFLUSH as
synchronous" removed REQ_SYNC flag from WRITE_FUA implementation.
generic_make_request_checks() however strips REQ_FUA flag from a bio
when the storage doesn't report volatile write cache and thus write
effectively becomes asynchronous which can lead to performance
regressions. This affects superblock writes for ext4. Fix the problem
by marking superblock writes always as synchronous.
Fixes: b685d3d65a
CC: linux-ext4@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull quota, reiserfs, udf and ext2 updates from Jan Kara:
"The branch contains changes to quota code so that it does not modify
persistent flags in inode->i_flags (it was the only place in kernel
doing that) and handle it inside filesystem's quotaon/off handlers
instead.
The branch also contains two UDF cleanups, a couple of reiserfs fixes
and one fix for ext2 quota locking"
* 'generic' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext4: Improve comments in ext4_quota_{on|off}()
udf: use kmap_atomic for memcpy copying
udf: use octal for permissions
quota: Remove dquot_quotactl_ops
reiserfs: Remove i_attrs_to_sd_attrs()
reiserfs: Remove useless setting of i_flags
jfs: Remove jfs_get_inode_flags()
ext2: Remove ext2_get_inode_flags()
ext4: Remove ext4_get_inode_flags()
quota: Stop setting IMMUTABLE and NOATIME flags on quota files
jfs: Set flags on quota files directly
ext2: Set flags on quota files directly
reiserfs: Set flags on quota files directly
ext4: Set flags on quota files directly
reiserfs: Protect dquot_writeback_dquots() by s_umount semaphore
reiserfs: Make cancel_old_flush() reliable
ext2: Call dquot_writeback_dquots() with s_umount held
reiserfs: avoid a -Wmaybe-uninitialized warning
When using both encryption and SELinux (or another feature that requires
an xattr per file) on a filesystem with 256-byte inodes, each file's
xattrs usually spill into an external xattr block. Currently, the
xattrs are inherited in the order ACL, security, then encryption.
Therefore, if spillage occurs, the encryption xattr will always end up
in the external block. This is not ideal because the encryption xattrs
contain a nonce, so they will always be unique and will prevent the
external xattr blocks from being deduplicated.
To improve the situation, change the inheritance order to encryption,
ACL, then security. This gives the encryption xattr a better chance to
be stored in-inode, allowing the other xattr(s) to be deduplicated.
Note that it may be better for userspace to format the filesystem with
512-byte inodes in this case. However, it's not the default.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext4_writepages() submits all pages with transaction started.
When no page needs block allocation or extent conversion we can submit
all dirty pages in the inode while holding a single transaction handle
and when device is congested this can take significant amount of time.
Thus ext4_writepages() can block transaction commits for extended
periods of time.
Take for example a simple benchmark simulating PostgreSQL database
(pgioperf in mmtest). The benchmark runs 16 processes doing random reads
from a huge file, one process doing random writes to the huge file, and
one process doing sequential writes to a small files and frequently
running fsync. With unpatched kernel transaction commits take on average
~18s with standard deviation of ~41s, top 5 commit times are:
274.466639s, 126.467347s, 86.992429s, 34.351563s, 31.517653s.
After this patch transaction commits take on average 0.1s with standard
deviation of 0.15s, top 5 commit times are:
0.563792s, 0.519980s, 0.509841s, 0.471700s, 0.469899s
[ Modified so we use an explicit do_map flag instead of relying on
io_end not being allocated, the since io_end->inode is needed for I/O
error handling. -- tytso ]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With enabled meta_bg option block group descriptors
reading IO is not sequential and requires optimization.
Signed-off-by: Andrew Perepechko <andrew.perepechko@seagate.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Make the ext4_shutdown() function static, as suggested by running sparse
('make C=2 fs/ext4/'). This was the only such warning in fs/ext4/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Support the GETFSMAP ioctls so that we can use the xfs free space
management tools to probe ext4 as well. Note that this is a partial
implementation -- we only report fixed-location metadata and free space;
everything else is reported as "unknown".
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently the case of writing via mmap to a file with inline data is not
handled. This is maybe a rare case since it requires a writable memory
map of a very small file, but it is trivial to trigger with on
inline_data filesystem, and it causes the
'BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA));' in
ext4_writepages() to be hit:
mkfs.ext4 -O inline_data /dev/vdb
mount /dev/vdb /mnt
xfs_io -f /mnt/file \
-c 'pwrite 0 1' \
-c 'mmap -w 0 1m' \
-c 'mwrite 0 1' \
-c 'fsync'
kernel BUG at fs/ext4/inode.c:2723!
invalid opcode: 0000 [#1] SMP
CPU: 1 PID: 2532 Comm: xfs_io Not tainted 4.11.0-rc1-xfstests-00301-g071d9acf3d1f #633
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014
task: ffff88003d3a8040 task.stack: ffffc90000300000
RIP: 0010:ext4_writepages+0xc89/0xf8a
RSP: 0018:ffffc90000303ca0 EFLAGS: 00010283
RAX: 0000028410000000 RBX: ffff8800383fa3b0 RCX: ffffffff812afcdc
RDX: 00000a9d00000246 RSI: ffffffff81e660e0 RDI: 0000000000000246
RBP: ffffc90000303dc0 R08: 0000000000000002 R09: 869618e8f99b4fa5
R10: 00000000852287a2 R11: 00000000a03b49f4 R12: ffff88003808e698
R13: 0000000000000000 R14: 7fffffffffffffff R15: 7fffffffffffffff
FS: 00007fd3e53094c0(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd3e4c51000 CR3: 000000003d554000 CR4: 00000000003406e0
Call Trace:
? _raw_spin_unlock+0x27/0x2a
? kvm_clock_read+0x1e/0x20
do_writepages+0x23/0x2c
? do_writepages+0x23/0x2c
__filemap_fdatawrite_range+0x80/0x87
filemap_write_and_wait_range+0x67/0x8c
ext4_sync_file+0x20e/0x472
vfs_fsync_range+0x8e/0x9f
? syscall_trace_enter+0x25b/0x2d0
vfs_fsync+0x1c/0x1e
do_fsync+0x31/0x4a
SyS_fsync+0x10/0x14
do_syscall_64+0x69/0x131
entry_SYSCALL64_slow_path+0x25/0x25
We could try to be smart and keep the inline data in this case, or at
least support delayed allocation when allocating the block, but these
solutions would be more complicated and don't seem worthwhile given how
rare this case seems to be. So just fix the bug by calling
ext4_convert_inline_data() when we're asked to make a page writable, so
that any inline data gets evicted, with the block allocated immediately.
Reported-by: Nick Alcock <nick.alcock@oracle.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_xattr_check_entry() was redundant with validation of the full xattr
entries list in ext4_xattr_check_entries(), which all callers also did.
ext4_xattr_check_entry() also didn't actually do correct validation;
specifically, it never checked that the value doesn't overlap the xattr
names, nor did it account for padding when checking whether the xattr
value overflows the available space. So remove it to eliminate any
potential confusion.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_xattr_check_names() actually validates both the xattr names and
values, not just the names. So rename it to ext4_xattr_check_entries()
to avoid confusion.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There's no difference between ext4_xattr_list() and ext4_listxattr(), so
merge them together and just have ext4_listxattr(). Some years ago they
took different arguments, but that's no longer the case.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Constify static data in ext4 that is never (intentionally) modified so
that it is placed in .rodata and benefits from memory protection.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the initial implementation of ext4 encryption, the filename was
encrypted in ext4_insert_dentry(), which could fail and also required
access to the 'dir' inode. Since then ext4 filename encryption has been
changed to encrypt the filename earlier, so we can revert the additions
to ext4_insert_dentry().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In preparation for converting fs/dax.c to use dax_direct_access()
instead of bdev_direct_access(), add the plumbing to retrieve the
dax_device associated with a given block_device.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Improve comments in ext4_quota_{on|off}() to explain that returning
success despite ext4_journal_start() failing is deliberate.
Signed-off-by: Jan Kara <jack@suse.cz>
Now that all places setting inode->i_flags that should be reflected in
on-disk flags are gone, we can remove ext4_get_inode_flags() call.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently immutable and noatime flags on quota files are set by quota
code which requires us to copy inode->i_flags to our on disk version of
quota flags in GETFLAGS ioctl and ext4_do_update_inode(). Move to
setting / clearing these on-disk flags directly to save that copying.
Signed-off-by: Jan Kara <jack@suse.cz>
Include a mask in struct stat to indicate which bits of stx_attributes the
filesystem actually supports.
This would also be useful if we add another system call that allows you to
do a 'bulk attribute set' and pass in a statx struct with the masks
appropriately set to say what you want to set.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Return enhanced file attributes from the Ext4 filesystem. This includes
the following:
(1) The inode creation time (i_crtime) as stx_btime, setting STATX_BTIME.
(2) Certain FS_xxx_FL flags are mapped to stx_attribute flags.
This requires that all ext4 inodes have a getattr call, not just some of
them, so to this end, split the ext4_getattr() function and only call part
of it where appropriate.
Example output:
[root@andromeda ~]# touch foo
[root@andromeda ~]# chattr +ai foo
[root@andromeda ~]# /tmp/test-statx foo
statx(foo) = 0
results=fff
Size: 0 Blocks: 0 IO Block: 4096 regular file
Device: 08:12 Inode: 2101950 Links: 1
Access: (0644/-rw-r--r--) Uid: 0 Gid: 0
Access: 2016-02-11 17:08:29.031795451+0000
Modify: 2016-02-11 17:08:29.031795451+0000
Change: 2016-02-11 17:11:11.987790114+0000
Birth: 2016-02-11 17:08:29.031795451+0000
Attributes: 0000000000000030 (-------- -------- -------- -------- -------- -------- -------- --ai----)
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
inodes relating to the inline_data and metadata checksum features.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAljXHNMACgkQ8vlZVpUN
gaPwoggAiodb37DHZ/X6fnRr8314OJT8mRUbUK3aDagCRb0Kp9iFAwwpHIG8Gxw1
akI7Jy8VWLC4EbHb9wzXFEO7wl/IBLq3t70Vid2cBR302gblhIIz6hkHrQ9RIlW3
MH5sFhXiVq4WYPuxQFWS6ohg6/SYTwcgI9rXxEnkLVmOiG2Ov2/v4/wiflau8vgK
fNYyncHSylwJ5QIaT8mUIawetlunEHO0Vz5AZNzkcMhkzUHxmRWvMtGWcvwukstb
7vXZhN5HHB8RZ33qcdtuAaNBHwBmrU/acicIpsvL/jfkFWlJTS0PBRUvwxnPeebo
G0xRDEIwpZoy5h8fxzIxqh+CQqg6QA==
=/ycw
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a memory leak on an error path, and two races when modifying
inodes relating to the inline_data and metadata checksum features"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix two spelling nits
ext4: lock the xattr block before checksuming it
jbd2: don't leak memory if setting up journal fails
ext4: mark inode dirty after converting inline directory
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAljW4wYACgkQ8vlZVpUN
gaPYugf9ExFbJhN+iYqUVbGXPvlr5VpEtDeVt7IfO3a37hqCEQ0IEPzksNIfUFul
B8/rYXpz0B5gqCJeo66CGLkb1SVvSoSKCq9/BTQtugohxM7sGxDFTmdB+A+u0QJH
leILfaMFuj0DhVOrdYVpGh7e1XPgSTUWy6/G42OJqf3SV2WxGRJtyBfmghZxEdiY
XYCGqjq47yOIPvzB+ufKe1hnphKMgxlHeuPvByzPCvOs58GlxAYR3Ycuvjc/nz+8
QVlAEPpGhf9ytEXELsxq/ZbsNj9xtXsNAzkAoMK+xZ2JCxIHRcS1ay/iAwxw+d9r
bnlpI+8tQ79GIGCv3cusJSwq7j1iuQ==
=wPlW
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypto fixes from Ted Ts'o:
"A code cleanup and bugfix for fs/crypto"
* tag 'fscrypt-for-linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: eliminate ->prepare_context() operation
fscrypt: remove broken support for detecting keyring key revocation
We must lock the xattr block before calculating or verifying the
checksum in order to avoid spurious checksum failures.
https://bugzilla.kernel.org/show_bug.cgi?id=193661
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
If ext4_convert_inline_data() was called on a directory with inline
data, the filesystem was left in an inconsistent state (as considered by
e2fsck) because the file size was not increased to cover the new block.
This happened because the inode was not marked dirty after i_disksize
was updated. Fix this by marking the inode dirty at the end of
ext4_finish_convert_inline_dir().
This bug was probably not noticed before because most users mark the
inode dirty afterwards for other reasons. But if userspace executed
FS_IOC_SET_ENCRYPTION_POLICY with invalid parameters, as exercised by
'kvm-xfstests -c adv generic/396', then the inode was never marked dirty
after updating i_disksize.
Cc: stable@vger.kernel.org # 3.10+
Fixes: 3c47d54170
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The only use of the ->prepare_context() fscrypt operation was to allow
ext4 to evict inline data from the inode before ->set_context().
However, there is no reason why this cannot be done as simply the first
step in ->set_context(), and in fact it makes more sense to do it that
way because then the policy modes and flags get validated before any
real work is done. Therefore, merge ext4_prepare_context() into
ext4_set_context(), and remove ->prepare_context().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull vfs 'statx()' update from Al Viro.
This adds the new extended stat() interface that internally subsumes our
previous stat interfaces, and allows user mode to specify in more detail
what kind of information it wants.
It also allows for some explicit synchronization information to be
passed to the filesystem, which can be relevant for network filesystems:
is the cached value ok, or do you need open/close consistency, or what?
From David Howells.
Andreas Dilger points out that the first version of the extended statx
interface was posted June 29, 2010:
https://www.spinics.net/lists/linux-fsdevel/msg33831.html
* 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
statx: Add a system call to make enhanced file info available
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h
doing that for them.
Note that even if the count where we need to add extra headers seems high,
it's still a net win, because <linux/sched.h> is included in over
2,200 files ...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix typos and add the following to the scripts/spelling.txt:
comsume||consume
comsumer||consumer
comsuming||consuming
I see some variable names with this pattern, but this commit is only
touching comment blocks to avoid unexpected impact.
Link: http://lkml.kernel.org/r/1481573103-11329-19-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace all 1 << inode->i_blkbits and (1 << inode->i_blkbits) in fs
branch.
This patch also fixes multiple checkpatch warnings: WARNING: Prefer
'unsigned int' to bare use of 'unsigned'
Thanks to Andrew Morton for suggesting more appropriate function instead
of macro.
[geliangtang@gmail.com: truncate: use i_blocksize()]
Link: http://lkml.kernel.org/r/9c8b2cd83c8f5653805d43debde9fa8817e02fc4.1484895804.git.geliangtang@gmail.com
Link: http://lkml.kernel.org/r/1481319905-10126-1-git-send-email-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since the introduction of FAULT_FLAG_SIZE to the vm_fault flag, it has
been somewhat painful with getting the flags set and removed at the
correct locations. More than one kernel oops was introduced due to
difficulties of getting the placement correctly.
Remove the flag values and introduce an input parameter to huge_fault
that indicates the size of the page entry. This makes the code easier
to trace and should avoid the issues we see with the fault flags where
removal of the flag was necessary in the fallback paths.
Link: http://lkml.kernel.org/r/148615748258.43180.1690152053774975329.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "1G transparent hugepage support for device dax", v2.
The following series implements support for 1G trasparent hugepage on
x86 for device dax. The bulk of the code was written by Mathew Wilcox a
while back supporting transparent 1G hugepage for fs DAX. I have
forward ported the relevant bits to 4.10-rc. The current submission has
only the necessary code to support device DAX.
Comments from Dan Williams: So the motivation and intended user of this
functionality mirrors the motivation and users of 1GB page support in
hugetlbfs. Given expected capacities of persistent memory devices an
in-memory database may want to reduce tlb pressure beyond what they can
already achieve with 2MB mappings of a device-dax file. We have
customer feedback to that effect as Willy mentioned in his previous
version of these patches [1].
[1]: https://lkml.org/lkml/2016/1/31/52
Comments from Nilesh @ Oracle:
There are applications which have a process model; and if you assume
10,000 processes attempting to mmap all the 6TB memory available on a
server; we are looking at the following:
processes : 10,000
memory : 6TB
pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB
pmd @ 2M page size: 120,000 / 512 = ~240GB
pud @ 1G page size: 240GB / 512 = ~480MB
As you can see with 2M pages, this system will use up an exorbitant
amount of DRAM to hold the page tables; but the 1G pages finally brings
it down to a reasonable level. Memory sizes will keep increasing; so
this number will keep increasing.
An argument can be made to convert the applications from process model
to thread model, but in the real world that may not be always practical.
Hopefully this helps explain the use case where this is valuable.
This patch (of 3):
In preparation for adding the ability to handle PUD pages, convert
vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault. The
vm_fault structure is extended to include a union of the different page
table pointers that may be needed, and three flag bits are reserved to
indicate which type of pointer is in the union.
[ross.zwisler@linux.intel.com: remove unused function ext4_dax_huge_fault()]
Link: http://lkml.kernel.org/r/1485813172-7284-1-git-send-email-ross.zwisler@linux.intel.com
[dave.jiang@intel.com: clear PMD or PUD size flags when in fall through path]
Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com
Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.
Remove the vma parameter to simplify things.
[arnd@arndb.de: fix ARM build]
Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge updates from Andrew Morton:
"142 patches:
- DAX updates
- various misc bits
- OCFS2 updates
- most of MM"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (142 commits)
mm/z3fold.c: limit first_num to the actual range of possible buddy indexes
mm: fix <linux/pagemap.h> stray kernel-doc notation
zram: remove obsolete sysfs attrs
mm/memblock.c: remove unnecessary log and clean up
oom-reaper: use madvise_dontneed() logic to decide if unmap the VMA
mm: drop unused argument of zap_page_range()
mm: drop zap_details::check_swap_entries
mm: drop zap_details::ignore_dirty
mm, page_alloc: warn_alloc nodemask is NULL when cpusets are disabled
mm: help __GFP_NOFAIL allocations which do not trigger OOM killer
mm, oom: do not enforce OOM killer for __GFP_NOFAIL automatically
mm: consolidate GFP_NOFAIL checks in the allocator slowpath
lib/show_mem.c: teach show_mem to work with the given nodemask
arch, mm: remove arch specific show_mem
mm, page_alloc: warn_alloc print nodemask
mm, page_alloc: do not report all nodes in show_mem
Revert "mm: bail out in shrink_inactive_list()"
mm, vmscan: consider eligible zones in get_scan_count
mm, vmscan: cleanup lru size claculations
mm, vmscan: do not count freed pages as PGDEACTIVATE
...
- Various cleanups
- Livelock fixes for eofblocks scanning
- Improved input verification for on-disk metadata
- Fix races in the copy on write remap mechanism
- Fix buffer io error timeout controls
- Streamlining of directio copy on write
- Asynchronous discard support
- Fix asserts when splitting delalloc reservations
- Don't bloat bmbt when right shifting extents
- Inode alignment fixes for 32k block sizes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ga1F
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.11-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"Here are the XFS changes for 4.11. We aren't introducing any major
features in this release cycle except for this being the first merge
window I've managed on my own. :)
Changes since last update:
- Various cleanups
- Livelock fixes for eofblocks scanning
- Improved input verification for on-disk metadata
- Fix races in the copy on write remap mechanism
- Fix buffer io error timeout controls
- Streamlining of directio copy on write
- Asynchronous discard support
- Fix asserts when splitting delalloc reservations
- Don't bloat bmbt when right shifting extents
- Inode alignment fixes for 32k block sizes"
* tag 'xfs-4.11-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (39 commits)
xfs: remove XFS_ALLOCTYPE_ANY_AG and XFS_ALLOCTYPE_START_AG
xfs: simplify xfs_rtallocate_extent
xfs: tune down agno asserts in the bmap code
xfs: Use xfs_icluster_size_fsb() to calculate inode chunk alignment
xfs: don't reserve blocks for right shift transactions
xfs: fix len comparison in xfs_extent_busy_trim
xfs: fix uninitialized variable in _reflink_convert_cow
xfs: split indlen reservations fairly when under reserved
xfs: handle indlen shortage on delalloc extent merge
xfs: resurrect debug mode drop buffered writes mechanism
xfs: clear delalloc and cache on buffered write failure
xfs: don't block the log commit handler for discards
xfs: improve busy extent sorting
xfs: improve handling of busy extents in the low-level allocator
xfs: don't fail xfs_extent_busy allocation
xfs: correct null checks and error processing in xfs_initialize_perag
xfs: update ctime and mtime on clone destinatation inodes
xfs: allocate direct I/O COW blocks in iomap_begin
xfs: go straight to real allocations for direct I/O COW writes
xfs: return the converted extent in __xfs_reflink_convert_cow
...
pmd_fault() and related functions really only need the vmf parameter since
the additional parameters are all included in the vmf struct. Remove the
additional parameter and simplify pmd_fault() and friends.
Link: http://lkml.kernel.org/r/1484085142-2297-8-git-send-email-ross.zwisler@linux.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of passing in multiple parameters in the pmd_fault() handler,
a vmf can be passed in just like a fault() handler. This will simplify
code and remove the need for the actual pmd fault handlers to allocate a
vmf. Related functions are also modified to do the same.
[dave.jiang@intel.com: fix issue with xfs_tests stall when DAX option is off]
Link: http://lkml.kernel.org/r/148469861071.195597.3619476895250028518.stgit@djiang5-desk3.ch.intel.com
Link: http://lkml.kernel.org/r/1484085142-2297-7-git-send-email-ross.zwisler@linux.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
primarily used for testing, but which can be useful on production
systems when a scratch volume is being destroyed and the data on it
doesn't need to be saved. This found (and we fixed) a number of bugs
with ext4's recovery to corrupted file system --- the bugs increased
the amount of data that could be potentially lost, and in the case of
the inline data feature, could cause the kernel to BUG.
Also included are a number of other bug fixes, including in ext4's
fscrypt, DAX, inline data support.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlirXesACgkQ8vlZVpUN
gaMOzQf8Ct6uPatV+m855oR4dAbZr2+lY4A4C+vHDzBtSMkPRyLX8cuo8XcwfTIm
vPVyDnL6EPyhXPxxfItu+92wAq1m5mVpKo57d0Ft5lw0rHxNtJTgVSRzsQ7VDRjj
5qMHW2K7Bk7EjzTeW3SF8/3+hqpzkAvRtNCntcomk5h08+cWMC8JSnn1kqw+naIn
EcbrC72GZb8JUELogVXC2vU58lp50SSBdr3l005jqKc5BvljMvdJ0Izn/3RVyU7u
q7vtynhe2ScFcHe/UzL1QgmQOy32tJpbS0NHalW47aw3Ynmn4cSX0YhhT9FDjRNQ
VOOfo1m1sAg166x0E+Nn7FeghTSSyA==
=cPIf
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"For this cycle we add support for the shutdown ioctl, which is
primarily used for testing, but which can be useful on production
systems when a scratch volume is being destroyed and the data on it
doesn't need to be saved.
This found (and we fixed) a number of bugs with ext4's recovery to
corrupted file system --- the bugs increased the amount of data that
could be potentially lost, and in the case of the inline data feature,
could cause the kernel to BUG.
Also included are a number of other bug fixes, including in ext4's
fscrypt, DAX, inline data support"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits)
ext4: rename EXT4_IOC_GOINGDOWN to EXT4_IOC_SHUTDOWN
ext4: fix fencepost in s_first_meta_bg validation
ext4: don't BUG when truncating encrypted inodes on the orphan list
ext4: do not use stripe_width if it is not set
ext4: fix stripe-unaligned allocations
dax: assert that i_rwsem is held exclusive for writes
ext4: fix DAX write locking
ext4: add EXT4_IOC_GOINGDOWN ioctl
ext4: add shutdown bit and check for it
ext4: rename s_resize_flags to s_ext4_flags
ext4: return EROFS if device is r/o and journal replay is needed
ext4: preserve the needs_recovery flag when the journal is aborted
jbd2: don't leak modified metadata buffers on an aborted journal
ext4: fix inline data error paths
ext4: move halfmd4 into hash.c directly
ext4: fix use-after-iput when fscrypt contexts are inconsistent
jbd2: fix use after free in kjournald2()
ext4: fix data corruption in data=journal mode
ext4: trim allocation requests to group size
ext4: replace BUG_ON with WARN_ON in mb_find_extent()
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlirP6wACgkQ8vlZVpUN
gaMwpQgApR67CxzlstxYjZpWPAqC8McJ2FBDX+mCOle5Vkc1WQDklwr0oCfQThTj
eDSFRhNfIvyPh0DJ589PxBCsWOqN5h6Si7hD5ZinomVNI+IL89OytaU5EV2OpWaW
iKdJgO9Tm8U7LuY6FOIoVdX57kUXVdkWoj61rC056B1SNhnNiVeofi7lYDM8Ix4q
IGSQ9W24iQKmCk4hCwgObhJBRK9RnlOH0GLUmpMaS+jnfnj/uePwdxWEFsPuCOob
8acAJ49lr55kjIw79E0BAyWxhEZ2aiArHk8PaWynT/DyNq3ftcapPlpftoeba8vo
glBJRX70QxPvt0iHEp0ykfExkhWhFA==
=Joki
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Various cleanups for the file system encryption feature"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: constify struct fscrypt_operations
fscrypt: properly declare on-stack completion
fscrypt: split supp and notsupp declarations into their own headers
fscrypt: remove redundant assignment of res
fscrypt: make fscrypt_operations.key_prefix a string
fscrypt: remove unused 'mode' member of fscrypt_ctx
ext4: don't allow encrypted operations without keys
fscrypt: make test_dummy_encryption require a keyring key
fscrypt: factor out bio specific functions
fscrypt: pass up error codes from ->get_context()
fscrypt: remove user-triggerable warning messages
fscrypt: use EEXIST when file already uses different policy
fscrypt: use ENOTDIR when setting encryption policy on nondirectory
fscrypt: use ENOKEY when file cannot be created w/o key
It's very likely the file system independent ioctl name will be
FS_IOC_SHUTDOWN, so let's use the same name for the ext4 ioctl name.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix a BUG when the kernel tries to mount a file system constructed as
follows:
echo foo > foo.txt
mke2fs -Fq -t ext4 -O encrypt foo.img 100
debugfs -w foo.img << EOF
write foo.txt a
set_inode_field a i_flags 0x80800
set_super_value s_last_orphan 12
quit
EOF
root@kvm-xfstests:~# mount -o loop foo.img /mnt
[ 160.238770] ------------[ cut here ]------------
[ 160.240106] kernel BUG at /usr/projects/linux/ext4/fs/ext4/inode.c:3874!
[ 160.240106] invalid opcode: 0000 [#1] SMP
[ 160.240106] Modules linked in:
[ 160.240106] CPU: 0 PID: 2547 Comm: mount Tainted: G W 4.10.0-rc3-00034-gcdd33b941b67 #227
[ 160.240106] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1 04/01/2014
[ 160.240106] task: f4518000 task.stack: f47b6000
[ 160.240106] EIP: ext4_block_zero_page_range+0x1a7/0x2b4
[ 160.240106] EFLAGS: 00010246 CPU: 0
[ 160.240106] EAX: 00000001 EBX: f7be4b50 ECX: f47b7dc0 EDX: 00000007
[ 160.240106] ESI: f43b05a8 EDI: f43babec EBP: f47b7dd0 ESP: f47b7dac
[ 160.240106] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 160.240106] CR0: 80050033 CR2: bfd85b08 CR3: 34a00680 CR4: 000006f0
[ 160.240106] Call Trace:
[ 160.240106] ext4_truncate+0x1e9/0x3e5
[ 160.240106] ext4_fill_super+0x286f/0x2b1e
[ 160.240106] ? set_blocksize+0x2e/0x7e
[ 160.240106] mount_bdev+0x114/0x15f
[ 160.240106] ext4_mount+0x15/0x17
[ 160.240106] ? ext4_calculate_overhead+0x39d/0x39d
[ 160.240106] mount_fs+0x58/0x115
[ 160.240106] vfs_kern_mount+0x4b/0xae
[ 160.240106] do_mount+0x671/0x8c3
[ 160.240106] ? _copy_from_user+0x70/0x83
[ 160.240106] ? strndup_user+0x31/0x46
[ 160.240106] SyS_mount+0x57/0x7b
[ 160.240106] do_int80_syscall_32+0x4f/0x61
[ 160.240106] entry_INT80_32+0x2f/0x2f
[ 160.240106] EIP: 0xb76b919e
[ 160.240106] EFLAGS: 00000246 CPU: 0
[ 160.240106] EAX: ffffffda EBX: 08053838 ECX: 08052188 EDX: 080537e8
[ 160.240106] ESI: c0ed0000 EDI: 00000000 EBP: 080537e8 ESP: bfa13660
[ 160.240106] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b
[ 160.240106] Code: 59 8b 00 a8 01 0f 84 09 01 00 00 8b 07 66 25 00 f0 66 3d 00 80 75 61 89 f8 e8 3e e2 ff ff 84 c0 74 56 83 bf 48 02 00 00 00 75 02 <0f> 0b 81 7d e8 00 10 00 00 74 02 0f 0b 8b 43 04 8b 53 08 31 c9
[ 160.240106] EIP: ext4_block_zero_page_range+0x1a7/0x2b4 SS:ESP: 0068:f47b7dac
[ 160.317241] ---[ end trace d6a773a375c810a5 ]---
The problem is that when the kernel tries to truncate an inode in
ext4_truncate(), it tries to clear any on-disk data beyond i_size.
Without the encryption key, it can't do that, and so it triggers a
BUG.
E2fsck does *not* provide this service, and in practice most file
systems have their orphan list processed by e2fsck, so to avoid
crashing, this patch skips this step if we don't have access to the
encryption key (which is the case when processing the orphan list; in
all other cases, we will have the encryption key, or the kernel
wouldn't have allowed the file to be opened).
An open question is whether the fact that e2fsck isn't clearing the
bytes beyond i_size causing problems --- and if we've lived with it
not doing it for so long, can we drop this from the kernel replay of
the orphan list in all cases (not just when we don't have the key for
encrypted inodes).
Addresses-Google-Bug: #35209576
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Avoid using stripe_width for sbi->s_stripe value if it is not actually
set. It prevents using the stride for sbi->s_stripe.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When a filesystem is created using:
mkfs.ext4 -b 4096 -E stride=512 <dev>
and we try to allocate 64MB extent, we will end up directly in
ext4_mb_complex_scan_group(). This is because the request is detected
as power-of-two allocation (so we start in ext4_mb_regular_allocator()
with ac_criteria == 0) however the check before
ext4_mb_simple_scan_group() refuses the direct buddy scan because the
allocation request is too large. Since cr == 0, the check whether we
should use ext4_mb_scan_aligned() fails as well and we fall back to
ext4_mb_complex_scan_group().
Fix the problem by checking for upper limit on power-of-two requests
directly when detecting them.
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Unlike O_DIRECT DAX is not an optional opt-in feature selected by the
application, so we'll have to provide the traditional synchronіzation
of overlapping writes as we do for buffered writes.
This was broken historically for DAX, but got fixed for ext2 and XFS
as part of the iomap conversion. Fix up ext4 as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Previously, each filesystem configured without encryption support would
define all the public fscrypt functions to their notsupp_* stubs. This
list of #defines had to be updated in every filesystem whenever a change
was made to the public fscrypt functions. To make things more
maintainable now that we have three filesystems using fscrypt, split the
old header fscrypto.h into several new headers. fscrypt_supp.h contains
the real declarations and is included by filesystems when configured
with encryption support, whereas fscrypt_notsupp.h contains the inline
stubs and is included by filesystems when configured without encryption
support. fscrypt_common.h contains common declarations needed by both.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We are currently using one bit in s_resize_flags; rename it in order
to allow more of the bits in that unsigned long for other purposes.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the file system requires journal recovery, and the device is
read-ony, return EROFS to the mount system call. This allows xfstests
generic/050 to pass.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
If the journal is aborted, the needs_recovery feature flag should not
be removed. Otherwise, it's the journal might not get replayed and
this could lead to more data getting lost.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
The write_end() function must always unlock the page and drop its ref
count, even on an error.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
The "half md4" transform should not be used by any new code. And
fortunately, it's only used now by ext4. Since ext4 supports several
hashing methods, at some point it might be desirable to move to
something like SipHash. As an intermediate step, remove half md4 from
cryptohash.h and lib, and make it just a local function in ext4's
hash.c. There's precedent for doing this; the other function ext can use
for its hashes -- TEA -- is also implemented in the same place. Also, by
being a local function, this might allow gcc to perform some additional
optimizations.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the case where the child's encryption context was inconsistent with
its parent directory, we were using inode->i_sb and inode->i_ino after
the inode had already been iput(). Fix this by doing the iput() in the
correct places.
Note: only ext4 had this bug, not f2fs and ubifs.
Fixes: d9cdc90331 ("ext4 crypto: enforce context consistency")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
ext4_journalled_write_end() did not propely handle all the cases when
generic_perform_write() did not copy all the data into the target page
and could mark buffers with uninitialized contents as uptodate and dirty
leading to possible data corruption (which would be quickly fixed by
generic_perform_write() retrying the write but still). Fix the problem
by carefully handling the case when the page that is written to is not
uptodate.
CC: stable@vger.kernel.org
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If filesystem groups are artifically small (using parameter -g to
mkfs.ext4), ext4_mb_normalize_request() can result in a request that is
larger than a block group. Trim the request size to not confuse
allocation code.
Reported-by: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
As reported by Arnd:
https://lkml.org/lkml/2017/1/10/756
Compiling with the following configuration:
# CONFIG_EXT2_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_FS_IOMAP depends on the above filesystems, as is not set
CONFIG_FS_DAX=y
generates build warnings about unused functions in fs/dax.c:
fs/dax.c:878:12: warning: `dax_insert_mapping' defined but not used [-Wunused-function]
static int dax_insert_mapping(struct address_space *mapping,
^~~~~~~~~~~~~~~~~~
fs/dax.c:572:12: warning: `copy_user_dax' defined but not used [-Wunused-function]
static int copy_user_dax(struct block_device *bdev, sector_t sector, size_t size,
^~~~~~~~~~~~~
fs/dax.c:542:12: warning: `dax_load_hole' defined but not used [-Wunused-function]
static int dax_load_hole(struct address_space *mapping, void **entry,
^~~~~~~~~~~~~
fs/dax.c:312:14: warning: `grab_mapping_entry' defined but not used [-Wunused-function]
static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index,
^~~~~~~~~~~~~~~~~~
Now that the struct buffer_head based DAX fault paths and I/O path have
been removed we really depend on iomap support being present for DAX.
Make this explicit by selecting FS_IOMAP if we compile in DAX support.
This allows us to remove conditional selections of FS_IOMAP when FS_DAX
was present for ext2 and ext4, and to remove an #ifdef in fs/dax.c.
Link: http://lkml.kernel.org/r/1484087383-29478-1-git-send-email-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The last BUG_ON in mb_find_extent() is apparently triggering in some
rare cases. Most of the time it indicates a bug in the buddy bitmap
algorithms, but there are some weird cases where it can trigger when
buddy bitmap is still in memory, but the block bitmap has to be read
from disk, and there is disk or memory corruption such that the block
bitmap and the buddy bitmap are out of sync.
Google-Bug-Id: #33702157
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is no need to call ext4_mark_inode_dirty while holding xattr_sem
or i_data_sem, so where it's easy to avoid it, move it out from the
critical region.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In order to test the inode extra isize expansion code, it is useful to
be able to easily create file systems that have inodes with extra
isize values smaller than the current desired value.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Inside ext4_ext_shift_extents() function ext4_find_extent() is called
without EXT4_EX_NOCACHE flag, which should prevent cache population.
This leads to oudated offsets in the extents tree and wrong blocks
afterwards.
Patch fixes the problem providing EXT4_EX_NOCACHE flag for each
ext4_find_extents() call inside ext4_ext_shift_extents function.
Fixes: 331573febb
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: stable@vger.kernel.org
While doing 'insert range' start block should be also shifted right.
The bug can be easily reproduced by the following test:
ptr = malloc(4096);
assert(ptr);
fd = open("./ext4.file", O_CREAT | O_TRUNC | O_RDWR, 0600);
assert(fd >= 0);
rc = fallocate(fd, 0, 0, 8192);
assert(rc == 0);
for (i = 0; i < 2048; i++)
*((unsigned short *)ptr + i) = 0xbeef;
rc = pwrite(fd, ptr, 4096, 0);
assert(rc == 4096);
rc = pwrite(fd, ptr, 4096, 4096);
assert(rc == 4096);
for (block = 2; block < 1000; block++) {
rc = fallocate(fd, FALLOC_FL_INSERT_RANGE, 4096, 4096);
assert(rc == 0);
for (i = 0; i < 2048; i++)
*((unsigned short *)ptr + i) = block;
rc = pwrite(fd, ptr, 4096, 4096);
assert(rc == 4096);
}
Because start block is not included in the range the hole appears at
the wrong offset (just after the desired offset) and the following
pwrite() overwrites already existent block, keeping hole untouched.
Simple way to verify wrong behaviour is to check zeroed blocks after
the test:
$ hexdump ./ext4.file | grep '0000 0000'
The root cause of the bug is a wrong range (start, stop], where start
should be inclusive, i.e. [start, stop].
This patch fixes the problem by including start into the range. But
not to break left shift (range collapse) stop points to the beginning
of the a block, not to the end.
The other not obvious change is an iterator check on validness in a
main loop. Because iterator is unsigned the following corner case
should be considered with care: insert a block at 0 offset, when stop
variables overflows and never becomes less than start, which is 0.
To handle this special case iterator is set to NULL to indicate that
end of the loop is reached.
Fixes: 331573febb
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: stable@vger.kernel.org
There was an unnecessary amount of complexity around requesting the
filesystem-specific key prefix. It was unclear why; perhaps it was
envisioned that different instances of the same filesystem type could
use different key prefixes, or that key prefixes could be binary.
However, neither of those things were implemented or really make sense
at all. So simplify the code by making key_prefix a const char *.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
While we allow deletes without the key, the following should not be
permitted:
# cd /vdc/encrypted-dir-without-key
# ls -l
total 4
-rw-r--r-- 1 root root 0 Dec 27 22:35 6,LKNRJsp209FbXoSvJWzB
-rw-r--r-- 1 root root 286 Dec 27 22:35 uRJ5vJh9gE7vcomYMqTAyD
# mv uRJ5vJh9gE7vcomYMqTAyD 6,LKNRJsp209FbXoSvJWzB
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As part of an effort to clean up fscrypt-related error codes, make
attempting to create a file in an encrypted directory that hasn't been
"unlocked" fail with ENOKEY. Previously, several error codes were used
for this case, including ENOENT, EACCES, and EPERM, and they were not
consistent between and within filesystems. ENOKEY is a better choice
because it expresses that the failure is due to lacking the encryption
key. It also matches the error code returned when trying to open an
encrypted regular file without the key.
I am not aware of any users who might be relying on the previous
inconsistent error codes, which were never documented anywhere.
This failure case will be exercised by an xfstest.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that dax_iomap_fault() calls ->iomap_begin() without entry lock, we
can use transaction starting in ext4_iomap_begin() and thus simplify
ext4_dax_fault(). It also provides us proper retries in case of ENOSPC.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull partial readlink cleanups from Miklos Szeredi.
This is the uncontroversial part of the readlink cleanup patch-set that
simplifies the default readlink handling.
Miklos and Al are still discussing the rest of the series.
* git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
vfs: make generic_readlink() static
vfs: remove ".readlink = generic_readlink" assignments
vfs: default to generic_readlink()
vfs: replace calling i_op->readlink with vfs_readlink()
proc/self: use generic_readlink
ecryptfs: use vfs_get_link()
bad_inode: add missing i_op initializers
Pull more vfs updates from Al Viro:
"In this pile:
- autofs-namespace series
- dedupe stuff
- more struct path constification"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features
ocfs2: charge quota for reflinked blocks
ocfs2: fix bad pointer cast
ocfs2: always unlock when completing dio writes
ocfs2: don't eat io errors during _dio_end_io_write
ocfs2: budget for extent tree splits when adding refcount flag
ocfs2: prohibit refcounted swapfiles
ocfs2: add newlines to some error messages
ocfs2: convert inode refcount test to a helper
simple_write_end(): don't zero in short copy into uptodate
exofs: don't mess with simple_write_{begin,end}
9p: saner ->write_end() on failing copy into non-uptodate page
fix gfs2_stuffed_write_end() on short copies
fix ceph_write_end()
nfs_write_end(): fix handling of short copies
vfs: refactor clone/dedupe_file_range common functions
fs: try to clone files first in vfs_copy_file_range
vfs: misc struct path constification
namespace.c: constify struct path passed to a bunch of primitives
quota: constify struct path in quota_on
...
Pull fs meta data unmap optimization from Jens Axboe:
"A series from Jan Kara, providing a more efficient way for unmapping
meta data from in the buffer cache than doing it block-by-block.
Provide a general helper that existing callers can use"
* 'for-4.10/fs-unmap' of git://git.kernel.dk/linux-block:
fs: Remove unmap_underlying_metadata
fs: Add helper to clean bdev aliases under a bh and use it
ext2: Use clean_bdev_aliases() instead of iteration
ext4: Use clean_bdev_aliases() instead of iteration
direct-io: Use clean_bdev_aliases() instead of handmade iteration
fs: Provide function to unmap metadata for a range of blocks
needed for both ext4 and xfs dax changes to use iomap for DAX. It
also includes the fscrypt branch which is needed for ubifs encryption
work as well as ext4 encryption and fscrypt cleanups.
Lots of cleanups and bug fixes, especially making sure ext4 is robust
against maliciously corrupted file systems --- especially maliciously
corrupted xattr blocks and a maliciously corrupted superblock. Also
fix ext4 support for 64k block sizes so it works well on ppcle. Fixed
mbcache so we don't miss some common xattr blocks that can be merged.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlhQQVEACgkQ8vlZVpUN
gaN9TQgAoCD+V4kJjMCFhiV8u6QR3hqD6bOZbggo5wJf4CHglWkmrbAmc3jANOgH
CKsXDRRjxuDjPXf1ukB1i4M7ArLYjkbbzKdsu7lismoJLS+w8uwUKSNdep+LYMjD
alxUcf5DCzLlUmdOdW4yE22L+CwRfqfs8IpBvKmJb7DrAKiwJVA340ys6daBGuu1
63xYx0QIyPzq0xjqLb6TVf88HUI4NiGVXmlm2wcrnYd5966hEZd/SztOZTVCVWOf
Z0Z0fGQ1WJzmaBB9+YV3aBi+BObOx4m2PUprIa531+iEW02E+ot5Xd4vVQFoV/r4
NX3XtoBrT1XlKagy2sJLMBoCavqrKw==
=j4KP
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"This merge request includes the dax-4.0-iomap-pmd branch which is
needed for both ext4 and xfs dax changes to use iomap for DAX. It also
includes the fscrypt branch which is needed for ubifs encryption work
as well as ext4 encryption and fscrypt cleanups.
Lots of cleanups and bug fixes, especially making sure ext4 is robust
against maliciously corrupted file systems --- especially maliciously
corrupted xattr blocks and a maliciously corrupted superblock. Also
fix ext4 support for 64k block sizes so it works well on ppcle. Fixed
mbcache so we don't miss some common xattr blocks that can be merged"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits)
dax: Fix sleep in atomic contex in grab_mapping_entry()
fscrypt: Rename FS_WRITE_PATH_FL to FS_CTX_HAS_BOUNCE_BUFFER_FL
fscrypt: Delay bounce page pool allocation until needed
fscrypt: Cleanup page locking requirements for fscrypt_{decrypt,encrypt}_page()
fscrypt: Cleanup fscrypt_{decrypt,encrypt}_page()
fscrypt: Never allocate fscrypt_ctx on in-place encryption
fscrypt: Use correct index in decrypt path.
fscrypt: move the policy flags and encryption mode definitions to uapi header
fscrypt: move non-public structures and constants to fscrypt_private.h
fscrypt: unexport fscrypt_initialize()
fscrypt: rename get_crypt_info() to fscrypt_get_crypt_info()
fscrypto: move ioctl processing more fully into common code
fscrypto: remove unneeded Kconfig dependencies
MAINTAINERS: fscrypto: recommend linux-fsdevel for fscrypto patches
ext4: do not perform data journaling when data is encrypted
ext4: return -ENOMEM instead of success
ext4: reject inodes with negative size
ext4: remove another test in ext4_alloc_file_blocks()
Documentation: fix description of ext4's block_validity mount option
ext4: fix checks for data=ordered and journal_async_commit options
...
Pull block layer updates from Jens Axboe:
"This is the main block pull request this series. Contrary to previous
release, I've kept the core and driver changes in the same branch. We
always ended up having dependencies between the two for obvious
reasons, so makes more sense to keep them together. That said, I'll
probably try and keep more topical branches going forward, especially
for cycles that end up being as busy as this one.
The major parts of this pull request is:
- Improved support for O_DIRECT on block devices, with a small
private implementation instead of using the pig that is
fs/direct-io.c. From Christoph.
- Request completion tracking in a scalable fashion. This is utilized
by two components in this pull, the new hybrid polling and the
writeback queue throttling code.
- Improved support for polling with O_DIRECT, adding a hybrid mode
that combines pure polling with an initial sleep. From me.
- Support for automatic throttling of writeback queues on the block
side. This uses feedback from the device completion latencies to
scale the queue on the block side up or down. From me.
- Support from SMR drives in the block layer and for SD. From Hannes
and Shaun.
- Multi-connection support for nbd. From Josef.
- Cleanup of request and bio flags, so we have a clear split between
which are bio (or rq) private, and which ones are shared. From
Christoph.
- A set of patches from Bart, that improve how we handle queue
stopping and starting in blk-mq.
- Support for WRITE_ZEROES from Chaitanya.
- Lightnvm updates from Javier/Matias.
- Supoort for FC for the nvme-over-fabrics code. From James Smart.
- A bunch of fixes from a whole slew of people, too many to name
here"
* 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits)
blk-stat: fix a few cases of missing batch flushing
blk-flush: run the queue when inserting blk-mq flush
elevator: make the rqhash helpers exported
blk-mq: abstract out blk_mq_dispatch_rq_list() helper
blk-mq: add blk_mq_start_stopped_hw_queue()
block: improve handling of the magic discard payload
blk-wbt: don't throttle discard or write zeroes
nbd: use dev_err_ratelimited in io path
nbd: reset the setup task for NBD_CLEAR_SOCK
nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
nvme-fabrics: Add target support for FC transport
nvme-fabrics: Add host support for FC transport
nvme-fabrics: Add FC transport LLDD api definitions
nvme-fabrics: Add FC transport FC-NVME definitions
nvme-fabrics: Add FC transport error codes to nvme.h
Add type 0x28 NVME type code to scsi fc headers
nvme-fabrics: patch target code in prep for FC transport support
nvme-fabrics: set sqe.command_id in core not transports
parser: add u64 number parser
nvme-rdma: align to generic ib_event logging helper
...
Rename the FS_CFLG_INPLACE_ENCRYPTION flag to FS_CFLG_OWN_PAGES which,
when set, indicates that the fs uses pages under its own control as
opposed to writeback pages which require locking and a bounce buffer for
encryption.
Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Multiple bugs were recently fixed in the "set encryption policy" ioctl.
To make it clear that fscrypt_process_policy() and fscrypt_get_policy()
implement ioctls and therefore their implementations must take standard
security and correctness precautions, rename them to
fscrypt_ioctl_set_policy() and fscrypt_ioctl_get_policy(). Make the
latter take in a struct file * to make it consistent with the former.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently data journalling is incompatible with encryption: enabling both
at the same time has never been supported by design, and would result in
unpredictable behavior. However, users are not precluded from turning on
both features simultaneously. This change programmatically replaces data
journaling for encrypted regular files with ordered data journaling mode.
Background:
Journaling encrypted data has not been supported because it operates on
buffer heads of the page in the page cache. Namely, when the commit
happens, which could be up to five seconds after caching, the commit
thread uses the buffer heads attached to the page to copy the contents of
the page to the journal. With encryption, it would have been required to
keep the bounce buffer with ciphertext for up to the aforementioned five
seconds, since the page cache can only hold plaintext and could not be
used for journaling. Alternatively, it would be required to setup the
journal to initiate a callback at the commit time to perform deferred
encryption - in this case, not only would the data have to be written
twice, but it would also have to be encrypted twice. This level of
complexity was not justified for a mode that in practice is very rarely
used because of the overhead from the data journalling.
Solution:
If data=journaled has been set as a mount option for a filesystem, or if
journaling is enabled on a regular file, do not perform journaling if the
file is also encrypted, instead fall back to the data=ordered mode for the
file.
Rationale:
The intent is to allow seamless and proper filesystem operation when
journaling and encryption have both been enabled, and have these two
conflicting features gracefully resolved by the filesystem.
Fixes: 4461471107
Signed-off-by: Sergey Karamov <skaramov@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
We should set the error code if kzalloc() fails.
Fixes: 67cf5b09a4 ("ext4: add the basic function for inline data support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Don't load an inode with a negative size; this causes integer overflow
problems in the VFS.
[ Added EXT4_ERROR_INODE() to mark file system as corrupted. -TYT]
Fixes: a48380f769 (ext4: rename i_dir_acl to i_size_high)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
If .readlink == NULL implies generic_readlink().
Generated by:
to_del="\.readlink.*=.*generic_readlink"
for i in `git grep -l $to_del`; do sed -i "/$to_del"/d $i; done
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Before commit c3fe493ccd ('ext4: remove unneeded test in
ext4_alloc_file_blocks()') then it was possible for "depth" to be -1
but now, it's not possible that it is negative.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Combination of data=ordered mode and journal_async_commit mount option
is invalid. However the check in parse_options() fails to detect the
case where we simply end up defaulting to data=ordered mode and we
detect the problem only on remount which triggers hard to understand
failure to remount the filesystem.
Fix the checking of mount options to take into account also the default
mode by moving the check somewhat later in the mount sequence.
Reported-by: Wolfgang Walter <linux@stwm.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On a filesystem with no journal, a symlink longer than about 32
characters (exact length depending on padding for encryption) could not
be followed or read immediately after being created in an encrypted
directory. This happened because when the symlink data went through the
delayed allocation path instead of the journaling path, the symlink was
incorrectly detected as a "fast" symlink rather than a "slow" symlink
until its data was written out.
To fix this, disable delayed allocation for symlinks, since there is
no benefit for delayed allocation anyway.
Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ralf Spenneberg reported that he hit a kernel crash when mounting a
modified ext4 image. And it turns out that kernel crashed when
calculating fs overhead (ext4_calculate_overhead()), this is because
the image has very large s_first_meta_bg (debug code shows it's
842150400), and ext4 overruns the memory in count_overhead() when
setting bitmap buffer, which is PAGE_SIZE.
ext4_calculate_overhead():
buf = get_zeroed_page(GFP_NOFS); <=== PAGE_SIZE buffer
blks = count_overhead(sb, i, buf);
count_overhead():
for (j = ext4_bg_num_gdb(sb, grp); j > 0; j--) { <=== j = 842150400
ext4_set_bit(EXT4_B2C(sbi, s++), buf); <=== buffer overrun
count++;
}
This can be reproduced easily for me by this script:
#!/bin/bash
rm -f fs.img
mkdir -p /mnt/ext4
fallocate -l 16M fs.img
mke2fs -t ext4 -O bigalloc,meta_bg,^resize_inode -F fs.img
debugfs -w -R "ssv first_meta_bg 842150400" fs.img
mount -o loop fs.img /mnt/ext4
Fix it by validating s_first_meta_bg first at mount time, and
refusing to mount if its value exceeds the largest possible meta_bg
number.
Reported-by: Ralf Spenneberg <ralf@os-t.de>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
It was possible for an xattr value to have a very large size, which
would then pass validation on 32-bit architectures due to a pointer
wraparound. Fix this by validating the size in a way which avoids
pointer wraparound.
It was also possible that a value's size would fit in the available
space but its padded size would not. This would cause an out-of-bounds
memory write in ext4_xattr_set_entry when replacing the xattr value.
For example, if an xattr value of unpadded size 253 bytes went until the
very end of the inode or block, then using setxattr(2) to replace this
xattr's value with 256 bytes would cause a write to the 3 bytes past the
end of the inode or buffer, and the new xattr value would be incorrectly
truncated. Fix this by requiring that the padded size fit in the
available space rather than the unpadded size.
This patch shouldn't have any noticeable effect on
non-corrupted/non-malicious filesystems.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With i_extra_isize equal to or close to the available space, it was
possible for us to read past the end of the inode when trying to detect
or validate in-inode xattrs. Fix this by checking for the needed extra
space first.
This patch shouldn't have any noticeable effect on
non-corrupted/non-malicious filesystems.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
i_extra_isize not divisible by 4 is problematic for several reasons:
- It causes the in-inode xattr space to be misaligned, but the xattr
header and entries are not declared __packed to express this
possibility. This may cause poor performance or incorrect code
generation on some platforms.
- When validating the xattr entries we can read past the end of the
inode if the size available for xattrs is not a multiple of 4.
- It allows the nonsensical i_extra_isize=1, which doesn't even leave
enough room for i_extra_isize itself.
Therefore, update ext4_iget() to consider i_extra_isize not divisible by
4 to be an error, like the case where i_extra_isize is too large.
This also matches the rule recently added to e2fsck for determining
whether an inode has valid i_extra_isize.
This patch shouldn't have any noticeable effect on
non-corrupted/non-malicious filesystems, since the size of ext4_inode
has always been a multiple of 4.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
On a CONFIG_EXT4_FS_ENCRYPTION=n kernel, the ioctls to get and set
encryption policies were disabled but EXT4_IOC_GET_ENCRYPTION_PWSALT was
not. But there's no good reason to expose the pwsalt ioctl if the
kernel doesn't support encryption. The pwsalt ioctl was also disabled
pre-4.8 (via ext4_sb_has_crypto() previously returning 0 when encryption
was disabled by config) and seems to have been enabled by mistake when
ext4 encryption was refactored to use fs/crypto/. So let's disable it
again.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_sb_has_crypto() just called through to ext4_has_feature_encrypt(),
and all callers except one were already using the latter. So remove it
and switch its one caller to ext4_has_feature_encrypt().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We've fixed the race condition problem in calculating ext4 checksum
value in commit b47820edd1 ("ext4: avoid modifying checksum fields
directly during checksum veficationon"). However, by this change,
when calculating the checksum value of inode whose i_extra_size is
less than 4, we couldn't calculate the checksum value in a proper way.
This problem was found and reported by Nix, Thank you.
Reported-by: Nix <nix@esperi.org.uk>
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Warn when a page is dirtied without buffers (as that will likely lead to
a crash in ext4_writepages()) or when it gets newly dirtied without the
page being locked (as there is nothing that prevents buffers to get
stripped just before calling set_page_dirty() under memory pressure).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we just silently ignore flags that we don't understand (or
that cannot be manipulated) through EXT4_IOC_SETFLAGS and
EXT4_IOC_FSSETXATTR ioctls. This makes it problematic for the unused
flags to be used in future (some app may be inadvertedly setting them
and we won't notice until the flag gets used). Also this is inconsistent
with other filesystems like XFS or BTRFS which return EOPNOTSUPP when
they see a flag they cannot set.
ext4 has the additional problem that there are flags which are returned
by EXT4_IOC_GETFLAGS ioctl but which cannot be modified via
EXT4_IOC_SETFLAGS. So we have to be careful to ignore value of these
flags and not fail the ioctl when they are set (as e.g. chattr(1) passes
flags returned from EXT4_IOC_GETFLAGS to EXT4_IOC_SETFLAGS without any
masking and thus we'd break this utility).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add EXT4_JOURNAL_DATA_FL and EXT4_EXTENTS_FL to EXT4_FL_USER_MODIFIABLE
to recognize that they are modifiable by userspace. So far we got away
without having them there because ext4_ioctl_setflags() treats them in a
special way. But it was really confusing like that.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_put_super, we call brelse on the buffer head containing
the ext4 superblock, but then try to use it when we stop the
mmp thread, because when the thread shuts down it does:
write_mmp_block
ext4_mmp_csum_set
ext4_has_metadata_csum
WARN_ON_ONCE(ext4_has_feature_metadata_csum(sb)...)
which reaches into sb->s_fs_info->s_es->s_feature_ro_compat,
which lives in the superblock buffer s_sbh which we just released.
Fix this by moving the brelse down to a point where we are no
longer using it.
Reported-by: Wang Shu <shuwang@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
When ext4 is compiled with DAX support, it now needs the iomap code. Add
appropriate select to Kconfig.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On a lockdep-enabled kernel, xfstests generic/027 fails due to a lockdep
warning when run on ext4 mounted with -o test_dummy_encryption:
xfs_io/4594 is trying to acquire lock:
(jbd2_handle
){++++.+}, at:
[<ffffffff813096ef>] jbd2_log_wait_commit+0x5/0x11b
but task is already holding lock:
(jbd2_handle
){++++.+}, at:
[<ffffffff813000de>] start_this_handle+0x354/0x3d8
The abbreviated call stack is:
[<ffffffff813096ef>] ? jbd2_log_wait_commit+0x5/0x11b
[<ffffffff8130972a>] jbd2_log_wait_commit+0x40/0x11b
[<ffffffff813096ef>] ? jbd2_log_wait_commit+0x5/0x11b
[<ffffffff8130987b>] ? __jbd2_journal_force_commit+0x76/0xa6
[<ffffffff81309896>] __jbd2_journal_force_commit+0x91/0xa6
[<ffffffff813098b9>] jbd2_journal_force_commit_nested+0xe/0x18
[<ffffffff812a6049>] ext4_should_retry_alloc+0x72/0x79
[<ffffffff812f0c1f>] ext4_xattr_set+0xef/0x11f
[<ffffffff812cc35b>] ext4_set_context+0x3a/0x16b
[<ffffffff81258123>] fscrypt_inherit_context+0xe3/0x103
[<ffffffff812ab611>] __ext4_new_inode+0x12dc/0x153a
[<ffffffff812bd371>] ext4_create+0xb7/0x161
When a file is created in an encrypted directory, ext4_set_context() is
called to set an encryption context on the new file. This calls
ext4_xattr_set(), which contains a retry loop where the journal is
forced to commit if an ENOSPC error is encountered.
If the task actually were to wait for the journal to commit in this
case, then it would deadlock because a handle remains open from
__ext4_new_inode(), so the running transaction can't be committed yet.
Fortunately, __jbd2_journal_force_commit() avoids the deadlock by not
allowing the running transaction to be committed while the current task
has it open. However, the above lockdep warning is still triggered.
This was a false positive which was introduced by: 1eaa566d36: jbd2:
track more dependencies on transaction commit
Fix the problem by passing the handle through the 'fs_data' argument to
ext4_set_context(), then using ext4_xattr_set_handle() instead of
ext4_xattr_set(). And in the case where no journal handle is specified
and ext4_set_context() has to open one, add an ENOSPC retry loop since
in that case it is the outermost transaction.
Signed-off-by: Eric Biggers <ebiggers@google.com>
The last user of ext4_aligned_io() was the DAX path in
ext4_direct_IO_write(). This usage was removed by Jan Kara's patch
entitled "ext4: Rip out DAX handling from direct IO path".
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reads and writes for DAX inodes should no longer end up in direct IO
code. Rip out the support and add a warning.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Convert DAX faults to use iomap infrastructure. We would not have to start
transaction in ext4_dax_fault() anymore since ext4_iomap_begin takes
care of that but so far we do that to avoid lock inversion of
transaction start with DAX entry lock which gets acquired in
dax_iomap_fault() before calling ->iomap_begin handler.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently mapping of blocks for DAX writes happen with
EXT4_GET_BLOCKS_PRE_IO flag set. That has a result that each
ext4_map_blocks() call creates a separate written extent, although it
could be merged to the neighboring extents in the extent tree. The
reason for using this flag is that in case the extent is unwritten, we
need to convert it to written one and zero it out. However this "convert
mapped range to written" operation is already implemented by
ext4_map_blocks() for the case of data writes into unwritten extent. So
just use flags for that mode of operation, simplify the code, and avoid
unnecessary split extents.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Implement DAX writes using the new iomap infrastructure instead of
overloading the direct IO path.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use iomap infrastructure for zeroing blocks when in DAX mode.
ext4_iomap_begin() handles read requests just fine and that's all that
is needed for iomap_zero_range().
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Implement basic iomap_begin function that handles reading and use it for
DAX reads.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we have S_DAX set inode->i_flags for a regular file whenever
ext4 is mounted with dax mount option. However in some cases we cannot
really do DAX - e.g. when inode is marked to use data journalling, when
inode data is being encrypted, or when inode is stored inline. Make sure
S_DAX flag is appropriately set/cleared in these cases.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out checks of 'from' and whether we are overwriting out of
ext4_file_write_iter() so that the function is easier to follow.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
