By the time rbd_dev_snaps_register() gets called during rbd device
initialization, the main device will have already been registered.
Similarly, a header refresh will only occur for an rbd device whose
Linux device is registered. There is therefore no need to verify
the main device is registered when registering a snapshot device.
For the time being, turn the check into a WARN_ON(), but it can
eventually just go away.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Call rbd_init_disk() from rbd_add() as soon as we have the major
device number for the mapping.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Hold off setting the device id and formatting the device name
in rbd_add() until just before it's needed.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Read the rbd header information and call rbd_dev_set_mapping()
earlier--before registering the block device or setting up the sysfs
entries for the image. The sysfs entries provide users access to
some information that's only available after doing the rbd header
initialization, so this will make sure it's valid right away.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
rbd_header_set_snap() is a simple initialization routine for an rbd
device's mapping. It has to be called after the snapshot context
for the rbd_dev has been updated, but can be done before snapshot
devices have been registered.
Change the name to rbd_dev_set_mapping() to better reflect its
purpose, and call it a little sooner, before registering snapshot
devices.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When a new snapshot is found in an rbd device's updated snapshot
context, __rbd_add_snap_dev() is called to create and insert an
entry in the rbd devices list of snapshots. In addition, a Linux
device is registered to represent the snapshot.
For version 2 rbd images, it will be undesirable to initialize the
device right away. So in anticipation of that, this patch separates
the insertion of a snapshot entry in the snaps list from the
creation of devices for those snapshots.
To do this, create a new function rbd_dev_snaps_register() which
traverses the list of snapshots and calls rbd_register_snap_dev()
on any that have not yet been registered.
Rename rbd_dev_snap_devs_update() to be rbd_dev_snaps_update()
to better reflect that only the entry in the snaps list and not
the snapshot's device is affected by the function.
For now, call rbd_dev_snaps_register() immediately after each
call to rbd_dev_snaps_update().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Move the assignment of the header name for an rbd image a bit later,
outside rbd_add_parse_args() and into its caller.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An rbd_dev structure maintains a list of current snapshots that have
already been fully initialized. The entries on the list have type
struct rbd_snap, and each entry contains a copy of information
that's found in the rbd_dev's snapshot context and header.
The only caller of snap_by_name() is rbd_header_set_snap(). In that
call site any positive return value (the index in the snapshot
array) is ignored, so there's no need to return the index in
the snapshot context's id array when it's found.
rbd_header_set_snap() also has only one caller--rbd_add()--and that
call is made after a call to rbd_dev_snap_devs_update(). Because
the rbd_snap structures are initialized in that function, the
current snapshot list can be used instead of the snapshot context to
look up a snapshot's information by name.
Change snap_by_name() so it uses the snapshot list rather than the
rbd_dev's snapshot context in looking up snapshot information.
Return 0 if it's found rather than the snapshot id.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When rbd_bus_add_dev() is called (one spot--in rbd_add()), the rbd
image header has not even been read yet. This means that the list
of snapshots will be empty at the time of the call. As a result,
there is no need for the code that calls rbd_register_snap_dev()
for each entry in that list--so get rid of it.
Once the header has been read (just after returning), a call will
be made to rbd_dev_snap_devs_update(), which will then find every
snapshot in the context to be new and will therefore call
rbd_register_snap_dev() via __rbd_add_snap_dev() accomplishing
the same thing.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Move the calls to get the header semaphore out of
rbd_header_set_snap() and into its caller.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This just simplifies a few things in rbd_init_disk(), now that the
previous patch has moved a bunch of initialization code out if it.
Done separately to facilitate review.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Move some of the code that initializes an rbd header out of
rbd_init_disk() and into its caller.
Move the code at the end of rbd_init_disk() that sets the device
capacity and activates the Linux device out of that function and
into the caller, ensuring we still have the disk size available
where we need it.
Update rbd_free_disk() so it still aligns well as an inverse of
rbd_init_disk(), moving the rbd_header_free() call out to its
caller.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is only one caller of snap_by_name(), and it passes two values
to be assigned, both of which are found within an rbd device
structure.
Change the interface so it just passes the address of the rbd_dev,
and make the assignments to its fields directly.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
With the exception of the snapshot name, all of the mapping-specific
fields in an rbd device structure are set in rbd_header_set_snap().
Pass the snapshot name to be assigned into rbd_header_set_snap()
to keep all of the mapping assignments together.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This is the first of two patches aimed at isolating the code that
sets the mapping information into a single spot.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add the size of the mapped image to the set of mapping-specific
fields in an rbd_device, and use it when setting the capacity of the
disk.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Several fields in a struct rbd_dev are related to what is mapped, as
opposed to the actual base rbd image. If the base image is mapped
these are almost unneeded, but if a snapshot is mapped they describe
information about that snapshot.
In some contexts this can be a little bit confusing. So group these
mapping-related field into a structure to make it clear what they
are describing.
This also includes a minor change that rearranges the fields in the
in-core image header structure so that invariant fields are at the
top, followed by those that change.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The "total_snaps" field in an rbd header structure is never any
different from the value of "num_snaps" stored within a snapshot
context. Avoid any confusion by just using the value held within
the snapshot context, and get rid of the "total_snaps" field.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
A copy of rbd_dev->disk->queue is held in rbd_dev->q, but it's
never actually used. So get just get rid of the field.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The name __rbd_init_snaps_header() doesn't really convey what that
function does very well. Its purpose is to scan a new snapshot
context and either create or destroy snapshot device entries so
that local host's view is consistent with the reality maintained
on the OSDs. This patch just changes the name of this function,
to be rbd_dev_snap_devs_update(). Still not perfect, but I think
better.
Also add some dynamic debug statements to this function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This should have been done as part of this commit:
commit de71a2970d
Author: Alex Elder <elder@inktank.com>
Date: Tue Jul 3 16:01:19 2012 -0500
rbd: rename rbd_device->id
rbd_id_get() is assigning the rbd_dev->dev_id field. Change the
name of that function as well as rbd_id_put() and rbd_id_max
to reflect what they are affecting.
Add some dynamic debug statements related to rbd device id activity.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define rbd_assert() and use it in place of various BUG_ON() calls
now present in the code. By default assertion checking is enabled;
we want to do this differently at some point.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There are two places where rbd_get_segment() is called. One, in
rbd_rq_fn(), only needs to know the length within a segment that an
I/O request should be. The other, in rbd_do_op(), also needs the
name of the object and the offset within it for the I/O request.
Split out rbd_segment_name() into three dedicated functions:
- rbd_segment_name() allocates and formats the name of the
object for a segment containing a given rbd image offset
- rbd_segment_offset() computes the offset within a segment for
a given rbd image offset
- rbd_segment_length() computes the length to use for I/O within
a segment for a request, not to exceed the end of a segment
object.
In the new functions be a bit more careful, checking for possible
error conditions:
- watch for errors or overflows returned by snprintf()
- catch (using BUG_ON()) potential overflow conditions
when computing segment length
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
It is possible in rbd_get_num_segments() for an overflow to occur
when adding the offset and length. This is easily avoided.
Since the function returns an int and the one caller is already
prepared to handle errors, have it return -ERANGE if overflow would
occur.
The overflow check would not work if a zero-length request was
being tested, so short-circuit that case, returning 0 for the
number of segments required. (This condition might be avoided
elsewhere already, I don't know.)
Have the caller end the request if either an error or 0 is returned.
The returned value is passed to __blk_end_request_all(), meaning
a 0 length request is not treated an error.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
There's a test for null rq pointer inside the while loop in
rbd_rq_fn() that's not needed. That same test already occurred
in the immediatly preceding loop condition test.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
In bio_chain_clone(), at the end of the function the bi_next field
of the tail of the new bio chain is nulled. This isn't necessary,
because if "tail" is non-null, its value will be the last bio
structure allocated at the top of the while loop in that function.
And before that structure is added to the end of the new chain, its
bi_next pointer is always made null.
While touching that function, clean a few other things:
- define each local variable on its own line
- move the definition of "tmp" to an inner scope
- move the modification of gfpmask closer to where it's used
- rearrange the logic that sets the chain's tail pointer
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
The "notify_timeout" rbd device option is never used, so get rid of
it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Add the ability to map an rbd image read-only, by specifying either
"read_only" or "ro" as an option on the rbd "command line." Also
allow the inverse to be explicitly specified using "read_write" or
"rw".
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
The rbd options don't really apply to the ceph client. So don't
store a pointer to it in the ceph_client structure, and put them
(a struct, not a pointer) into the rbd_dev structure proper.
Pass the rbd device structure to rbd_client_create() so it can
assign rbd_dev->rbdc if successful, and have it return an error code
instead of the rbd client pointer.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
This just rearranges things a bit more in rbd_header_from_disk()
so that the snapshot sizes are initialized right after the buffer
to hold them is allocated and doing a little further consolidation
that follows from that. Also adds a few simple comments.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
The only thing the on-disk snap_names_len field is needed is to
size the buffer allocated to hold a copy of the snapshot names
for an rbd image.
So don't bother saving it in the in-core rbd_image_header structure.
Just use a local variable to hold the required buffer size while
it's needed.
Move the code that actually copies the snapshot names up closer
to where the required length is saved.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
In rbd_header_from_disk() the object prefix buffer is sized based on
the maximum size it's block_name equivalent on disk could be.
Instead, only allocate enough to hold null-terminated string from
the on-disk header--or the maximum size of no NUL is found.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
There is only caller of __rbd_client_find(), and it somewhat
clumsily gets the appropriate lock and gets a reference to the
existing ceph_client structure if it's found.
Instead, have that function handle its own locking, and acquire the
reference if found while it holds the lock. Drop the underscores
from the name because there's no need to signify anything special
about this function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
This fixes a bug that went in with this commit:
commit f6e0c99092cca7be00fca4080cfc7081739ca544
Author: Alex Elder <elder@inktank.com>
Date: Thu Aug 2 11:29:46 2012 -0500
rbd: simplify __rbd_init_snaps_header()
The problem is that a new rbd snapshot needs to go either after an
existing snapshot entry, or at the *end* of an rbd device's snapshot
list. As originally coded, it is placed at the beginning. This was
based on the assumption the list would be empty (so it wouldn't
matter), but in fact if multiple new snapshots are added to an empty
list in one shot the list will be non-empty after the first one is
added.
This addresses http://tracker.newdream.net/issues/3063
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In the on-disk image header structure there is a field "block_name"
which represents what we now call the "object prefix" for an rbd
image. Rename this field "object_prefix" to be consistent with
modern usage.
This appears to be the only remaining vestige of the use of "block"
in symbols that represent objects in the rbd code.
This addresses http://tracker.newdream.net/issues/1761
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Right now rbd_read_header() both reads the header object for an rbd
image and decodes its contents. It does this repeatedly if needed,
in order to ensure a complete and intact header is obtained.
Separate this process into two steps--reading of the raw header
data (in new function, rbd_dev_v1_header_read()) and separately
decoding its contents (in rbd_header_from_disk()). As a result,
the latter function no longer requires its allocated_snaps argument.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add checks on the validity of the snap_count and snap_names_len
field values in rbd_dev_ondisk_valid(). This eliminates the
need to do them in rbd_header_from_disk().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The only caller of rbd_header_from_disk() is rbd_read_header().
It passes as allocated_snaps the number of snapshots it will
have received from the server for the snapshot context that
rbd_header_from_disk() is to interpret. The first time through
it provides 0--mainly to extract the number of snapshots from
the snapshot context header--so that it can allocate an
appropriately-sized buffer to receive the entire snapshot
context from the server in a second request.
rbd_header_from_disk() will not fill in the array of snapshot ids
unless the number in the snapshot matches the number the caller
had allocated.
This patch adjusts that logic a little further to be more efficient.
rbd_read_header() doesn't even examine the snapshot context unless
the snapshot count (stored in header->total_snaps) matches the
number of snapshots allocated. So rbd_header_from_disk() doesn't
need to allocate or fill in the snapshot context field at all in
that case.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This just moves code around for the most part. It was pulled out as
a separate patch to avoid cluttering up some upcoming patches which
are more substantive. The point is basically to group everything
related to initializing the snapshot context together.
The only functional change is that rbd_header_from_disk() now
ensures the (in-core) header it is passed is zero-filled. This
allows a simpler error handling path in rbd_header_from_disk().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Fix a few spots in rbd_header_from_disk() to use sizeof (object)
rather than sizeof (type). Use a local variable to record sizes
to shorten some lines and improve readability.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Fix a number of spots where a pointer value that is known to
have become invalid but was not reset to null.
Also, toss in a change so we use sizeof (object) rather than
sizeof (type).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The snap_names_len field of an rbd_image_header structure is defined
with type size_t. That field is used as both the source and target
of 64-bit byte-order swapping operations though, so it's best to
define it with type u64 instead.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The purpose of __rbd_init_snaps_header() is to compare a new
snapshot context with an rbd device's list of existing snapshots.
It updates the list by adding any new snapshots or removing any
that are not present in the new snapshot context.
The code as written is a little confusing, because it traverses both
the existing snapshot list and the set of snapshots in the snapshot
context in reverse. This was done based on an assumption about
snapshots that is not true--namely that a duplicate snapshot name
could cause an error in intepreting things if they were not
processed in ascending order.
These precautions are not necessary, because:
- all snapshots are uniquely identified by their snapshot id
- a new snapshot cannot be created if the rbd device has another
snapshot with the same name
(It is furthermore not currently possible to rename a snapshot.)
This patch re-implements __rbd_init_snaps_header() so it passes
through both the existing snapshot list and the entries in the
snapshot context in forward order. It still does the same thing
as before, but I find the logic considerably easier to understand.
By going forward through the names in the snapshot context, there
is no longer a need for the rbd_prev_snap_name() helper function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
If a read-only rbd device is opened for writing in rbd_open(), it
returns without dropping the just-acquired device reference.
Fix this by moving the read-only check before getting the reference.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Create a simple helper that handles the common case of calling
__rbd_refresh_header() while holding the ctl_mutex.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add a new parameter to __rbd_refresh_header() through which the
version of the header object is passed back to the caller. In most
cases this isn't needed. The main motivation is to normalize
(almost) all calls to __rbd_refresh_header() so they are all
wrapped immediately by mutex_lock()/mutex_unlock().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This fixes a few issues in rbd_header_from_disk():
- There is a check intended to catch overflow, but it's wrong in
two ways.
- First, the type we don't want to overflow is size_t, not
unsigned int, and there is now a SIZE_MAX we can use for
use with that type.
- Second, we're allocating the snapshot ids and snapshot
image sizes separately (each has type u64; on disk they
grouped together as a rbd_image_header_ondisk structure).
So we can use the size of u64 in this overflow check.
- If there are no snapshots, then there should be no snapshot
names. Enforce this, and issue a warning if we encounter a
header with no snapshots but a non-zero snap_names_len.
- When saving the snapshot names into the header, be more direct
in defining the offset in the on-disk structure from which
they're being copied by using "snap_count" rather than "i"
in the array index.
- If an error occurs, the "snapc" and "snap_names" fields are
freed at the end of the function. Make those fields be null
pointers after they're freed, to be explicit that they are
no longer valid.
- Finally, move the definition of the local variable "i" to the
innermost scope in which it's needed.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
All of the callers of rbd_req_sync_op() except one pass a non-null
"ops" pointer. The only one that does not is rbd_req_sync_read(),
which passes CEPH_OSD_OP_READ as its "opcode" and, CEPH_OSD_FLAG_READ
for "flags".
By allocating the ops array in rbd_req_sync_read() and moving the
special case code for the null ops pointer into it, it becomes
clear that much of that code is not even necessary.
In addition, the "opcode" argument to rbd_req_sync_op() is never
actually used, so get rid of that.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
rbd_header_add_snap() passes the address of a version variable to
rbd_req_sync_exec(), but it ignores the result. Just pass a null
pointer instead.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Either rbd_create_rw_ops() will succeed, or it will fail because a
memory allocation failed. Have it just return a valid pointer or
null rather than stuffing a pointer into a provided address and
returning an errno.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
It's not obvious whether the snapshot pointer whose address is
provided to __rbd_add_snap_dev() will be assigned by that function.
Change it to return the snapshot, or a pointer-coded errno in the
event of a failure.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
rbd_req_sync_unwatch() only ever uses rbd_dev->header_name as the
value of its "object_name" parameter, and that value is available
within the function already. So get rid of the parameter.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
rbd_req_sync_notify_ack() only ever uses rbd_dev->header_name as the
value of its "object_name" parameter, and that value is available
within the function already. So get rid of the parameter.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
rbd_req_sync_notify() only ever uses rbd_dev->header_name as the
value of its "object_name" parameter, and that value is available
within the function already. So get rid of the parameter.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
rbd_req_sync_watch() is only called in one place, and in that place
it passes rbd_dev->header_name as the value of the "object_name"
parameter. This value is available within the function already.
Having the extra parameter leaves the impression the object name
could take on different values, but it does not.
So get rid of the parameter. We can always add it back again if
we find we want to watch some other object in the future.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Both rbd_register_snap_dev() and __rbd_remove_snap_dev() have
rbd_dev parameters that are unused. Remove them.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The function rbd_header_from_disk() is only called in one spot, and
it passes GFP_KERNEL as its value for the gfp_flags parameter.
Just drop that parameter and substitute GFP_KERNEL everywhere within
that function it had been used. (If we find we need the parameter
again in the future it's easy enough to add back again.)
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The "snapc" parameter to in rbd_req_sync_read() is not used, so
get rid of it.
Reported-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The "id" field of an rbd device structure represents the unique
client-local device id mapped to the underlying rbd image. Each rbd
image will have another id--the image id--and each snapshot has its
own id as well. The simple name "id" no longer conveys the
information one might like to have.
Rename the device "id" field in struct rbd_dev to be "dev_id" to
make it a little more obvious what we're dealing with without having
to think more about context.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
If an rbd image header is read and it doesn't begin with the
expected magic information, a warning is displayed. This is
a fairly simple test, but it could be extended at some point.
Fix the comparison so it actually looks at the "text" field
rather than the front of the structure.
In any case, encapsulate the validity test in its own function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There was a dout() call in rbd_do_request() that was reporting
the reporting the offset as the length and vice versa. While
fixing that I did a quick scan of other dout() calls and fixed
a couple of other minor things.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This just replaces a while loop with list_for_each_entry_safe()
in __rbd_remove_all_snaps().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In commit c666601a there was inadvertently added an extra
initialization of rbd_dev->header_rwsem. This gets rid of the
duplicate.
Reported-by: Guangliang Zhao <gzhao@suse.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The snap_seq field in an rbd_image_header structure held the value
from the rbd image header when it was last refreshed. We now
maintain this value in the snapc->seq field. So get rid of the
other one.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In rbd_header_add_snap() there is code to set snapc->seq to the
just-added snapshot id. This is the only remnant left of the
use of that field for recording which snapshot an rbd_dev was
associated with. That functionality is no longer supported,
so get rid of that final bit of code.
Doing so means we never actually set snapc->seq any more. On the
server, the snapshot context's sequence value represents the highest
snapshot id ever issued for a particular rbd image. So we'll make
it have that meaning here as well. To do so, set this value
whenever the rbd header is (re-)read. That way it will always be
consistent with the rest of the snapshot context we maintain.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In rbd_header_set_snap(), there is logic to make the snap context's
seq field get set to a particular snapshot id, or 0 if there is no
snapshot for the rbd image.
This seems to be an artifact of how the current snapshot id for an
rbd_dev was recorded before the rbd_dev->snap_id field began to be
used for that purpose.
There's no need to update the value of snapc->seq here any more, so
stop doing it. Tidy up a few local variables in that function
while we're at it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In what appears to be an artifact of a different way of encoding
whether an rbd image maps a snapshot, __rbd_refresh_header() has
code that arranges to update the seq value in an rbd image's
snapshot context to point to the first entry in its snapshot
array if that's where it was pointing initially.
We now use rbd_dev->snap_id to record the snapshot id--using the
special value CEPH_NOSNAP to indicate the rbd_dev is not mapping a
snapshot at all.
There is therefore no need to check for this case, nor to update the
seq value, in __rbd_refresh_header(). Just preserve the seq value
that rbd_read_header() provides (which, at the moment, is nothing).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Previously the original header version was sent. Now, we update it
when the header changes.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@inktank.com>
This prevents a race between requests with a given snap context and
header updates that free it. The osd client was already expecting the
snap context to be reference counted, since it get()s it in
ceph_osdc_build_request and put()s it when the request completes.
Also remove the second down_read()/up_read() on header_rwsem in
rbd_do_request, which wasn't actually preventing this race or
protecting any other data.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@inktank.com>
If an image was mapped to a snapshot, the size of the head version
would be shown. Protect capacity with header_rwsem, since it may
change.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Snapshots cannot be resized, and the new capacity of head should not
be reflected by the snapshot.
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
When a snapshot is deleted, the OSD will return ENOENT when reading
from it. This is normally interpreted as a hole by rbd, which will
return zeroes. To minimize the time in which this can happen, stop
requests early when we are notified that our snapshot no longer
exists.
[elder@inktank.com: updated __rbd_init_snaps_header() logic]
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Several functions include a num_reply parameter, but it is never
used. Just get rid of it everywhere--it seems to be something
that never got fully implemented.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Use the name "ceph_opts" consistently (rather than just "opt") for
pointers to a ceph_options structure.
Change the few spots that don't use "rbd_opts" for a rbd_options
pointer to match the rest.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Rename variables named "obj" which represent object names so they're
consistently named "object_name".
Rename the "cls" and "method" parameters in rbd_req_sync_exec()
to be "class_name" and "method_name", and make similar changes
to the names of local variables in that function representing
the lengths of those names.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An rbd image is not a single object, but a logical construct made up
of an aggregation of objects.
Rename some fields in struct rbd_dev, in hopes of reinforcing this.
obj --> image_name
obj_len --> image_name_len
obj_md_name --> header_name
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Most variables that represent a struct rbd_device are named
"rbd_dev", but in some cases "dev" is used instead. Change all the
"dev" references so they use "rbd_dev" consistently, to make it
clear from the name that we're working with an RBD device (as
opposed to, for example, a struct device). Similarly, change the
name of the "dev" field in struct rbd_notify_info to be "rbd_dev".
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is no need to impose a small limit the length of the snapshot
name recorded for an rbd image in a struct rbd_dev. Remove the
limitation by allocating space for the snapshot name dynamically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is no need to impose a small limit the length of the rbd image
name recorded in a struct rbd_dev. Remove the limitation by
allocating space for the image name dynamically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is no need to impose a small limit the length of the header
name recorded for an rbd image in a struct rbd_dev. Remove the
limitation by allocating space for the header name dynamically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is no need to impose a small limit the length of the object
prefix recorded for an rbd image in a struct rbd_image_header.
Remove the limitation by allocating space for the object prefix
dynamically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is no need to impose a small limit the length of the pool name
recorded for an rbd image in a struct rbd_device. Remove the
limitation by allocating space for the pool name ynamically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add an entry under /sys/bus/rbd/devices/<N>/ named "pool_id" that
provides the id for the pool the rbd image is assocatied with. This
is in addition to the pool name already provided.
Rename the "poolid" field in struct rbd_device to be "pool_id".
Update the documentation to reflect the addition of this new entry.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Each rbd image has a name that forms the basis of all data objects
backing the device. Old (format 1) images refer to this name as the
"block name," while new (format 2) images use the term "object
prefix" for this.
Change the field name in the in-core rbd image header structure to
reflect the more modern usage. We intentionally keep the the name
"block_name" in the on-disk definition for format 1 image headers.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define a new function dup_token(), to be used during argument
parsing for making dynamically-allocated copies of tokens being
parsed.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In rbd_req_sync_notify_ack(), a local variable was needlessly being
used to hold a null pointer. Just pass NULL instead.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Sparse complains about this because:
drivers/block/rbd.c:996:20: warning: cast to restricted __le32
drivers/block/rbd.c:996:20: warning: cast from restricted __le16
These are set in osd_req_encode_op() and they are le16.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Elder <elder@inktank.com>
This function rereads the entire header and handles any changes in
it, not just changes in snapshots.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Snapshot sizes should be the same type as regular image sizes. This
only affects their displayed size in sysfs, not the reported size of
an actual block device sizes.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
The snapid parameters passed to rbd_do_op() and rbd_req_sync_op()
are now always either a valid snapid or an explicit CEPH_NOSNAP.
[elder@dreamhost.com: Rephrased the description]
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
When a device was open at a snapshot, and snapshots were deleted or
added, data from the wrong snapshot could be read. Instead of
assuming the snap context is constant, store the actual snap id when
the device is initialized, and rely on the OSDs to signal an error
if we try reading from a snapshot that was deleted.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
This is updated whenever a snapshot is added or deleted, and the
snapc pointer is changed with every refresh of the header.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
ondisk->snap_count is read from disk via rbd_req_sync_read() and thus
needs validation. Otherwise, a bogus `snap_count' could overflow the
kmalloc() size, leading to memory corruption.
Also use `u32' consistently for `snap_count'.
[elder@dreamhost.com: changed to use UINT_MAX rather than ULONG_MAX]
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
We should use the gfp_flags that the caller specified instead of
GFP_KERNEL here.
There is only one caller and it uses GFP_KERNEL, so this change is
just a cleanup and doesn't change how the code works.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
This was an ill-conceived feature that has been removed from Ceph. Do
this gracefully:
- reject attempts to specify a preferred_osd via the ioctl
- stop exposing this information via virtual xattrs
- always fill in -1 for requests, in case we talk to an older server
- don't calculate preferred_osd placements/pgids
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>
A recent change made changes to the rbd_client_list be protected by
a spinlock. Unfortunately in rbd_put_client(), the lock is taken
before possibly dropping the last reference to an rbd_client, and on
the last reference that eventually calls flush_workqueue() which can
sleep.
The problem was flagged by a debug spinlock warning:
BUG: spinlock wrong CPU on CPU#3, rbd/27814
The solution is to move the spinlock acquisition and release inside
rbd_client_release(), which is the spot where it's really needed for
protecting the removal of the rbd_client from the client list.
Signed-off-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Sage Weil <sage@newdream.net>
A new temporary header is allocated each time the header changes, but
only the changed properties are copied over. We don't need a new
semaphore for each header update.
This addresses http://tracker.newdream.net/issues/2174
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
Currently an rbd device's id is released when it is removed, but it
is done before the code is run to clean up sysfs-related files (such
as /sys/bus/rbd/devices/1).
It's possible that an rbd is still in use after the rbd_remove()
call has been made. It's essentially the same as an active inode
that stays around after it has been removed--until its final close
operation. This means that the id shows up as free for reuse at a
time it should not be.
The effect of this was seen by Jens Rehpoehler, who:
- had a filesystem mounted on an rbd device
- unmapped that filesystem (without unmounting)
- found that the mount still worked properly
- but hit a panic when he attempted to re-map a new rbd device
This re-map attempt found the previously-unmapped id available.
The subsequent attempt to reuse it was met with a panic while
attempting to (re-)install the sysfs entry for the new mapped
device.
Fix this by holding off "putting" the rbd id, until the rbd_device
release function is called--when the last reference is finally
dropped.
Note: This fixes: http://tracker.newdream.net/issues/1907
Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
