Commit Graph

71 Commits

Author SHA1 Message Date
Dave Airlie
542d972221 Linux 4.7-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXcHi9AAoJEHm+PkMAQRiGSJ0H/2o4t9VWYmhyPC1sdIHoCExJ
 P4tBrcZYBmKcsOmIfnJDa5g/+IdhouEUM0v0fHPogS2UUWT9eRuJWYD3sY+HpEQ+
 heKTli8X73gsFB25odeIbIt0jAoSiiMYWDrWqLNsuUV1tjEYVA8rH0SM94FiOC/5
 7WVWXLTuH+Rm7JHP18BnKxmMMbzrTFmwisLMqFKyfZRRSlS+/ix7iLUNO9AFa39B
 YHxNPihLrZ0oONyCOAQoHTIXXrw0cQbxV2utg3vnMcCZdme2xOn+iXMntTSKfZ39
 iC9/T0vsO3R6OrRo2aDZAnCPUAniXnMEIhrKG37WMyXpj6cucZ/2QiNXcXviGV4=
 =iLte
 -----END PGP SIGNATURE-----

Back-merge tag 'v4.7-rc5' into drm-next

Linux 4.7-rc5

The fsl-dcu pull needs -rc3 so go to -rc5 for now.
2016-07-02 15:56:01 +10:00
Alexey Brodkin
830c657848 ARC: [nsimosci] Enable ARC PGU on nSIM OSCI virtual platforms
With required ARC PGU updates that allow it to be used on simulation
platforms we may finally utilize ARC PGU in nSIM OSCI virtual platforms
with modern Linux kernels.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-06-13 17:45:18 +02:00
Alexey Brodkin
c8f1daa8ba ARCv2: [vdk] Enable ARC PGU on HS38 VDK
With required ARC PGU updates that allow it to be used on simulation
platforms we may finally utilize ARC PGU in HS38 VDK with modern
Linux kernels.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-06-13 17:45:17 +02:00
Alexey Brodkin
49acadff2a arc: Get rid of root core-frequency property
Now when we switched to usage of real clk devices for CPU core
frequency those root properties make no sense any longer.
Se we're just getting rid of them here to not confuse readers of
our .dts files.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Christian Ruppert <christian.ruppert@alitech.com>
Cc: Noam Camus <noamca@mellanox.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-30 10:07:32 +05:30
Linus Torvalds
1d6da87a32 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "Here's the main drm pull request for 4.7, it's been a busy one, and
  I've been a bit more distracted in real life this merge window.  Lots
  more ARM drivers, not sure if it'll ever end.  I think I've at least
  one more coming the next merge window.

  But changes are all over the place, support for AMD Polaris GPUs is in
  here, some missing GM108 support for nouveau (found in some Lenovos),
  a bunch of MST and skylake fixes.

  I've also noticed a few fixes from Arnd in my inbox, that I'll try and
  get in asap, but I didn't think they should hold this up.

  New drivers:
   - Hisilicon kirin display driver
   - Mediatek MT8173 display driver
   - ARC PGU - bitstreamer on Synopsys ARC SDP boards
   - Allwinner A13 initial RGB output driver
   - Analogix driver for DisplayPort IP found in exynos and rockchip

  DRM Core:
   - UAPI headers fixes and C++ safety
   - DRM connector reference counting
   - DisplayID mode parsing for Dell 5K monitors
   - Removal of struct_mutex from drivers
   - Connector registration cleanups
   - MST robustness fixes
   - MAINTAINERS updates
   - Lockless GEM object freeing
   - Generic fbdev deferred IO support

  panel:
   - Support for a bunch of new panels

  i915:
   - VBT refactoring
   - PLL computation cleanups
   - DSI support for BXT
   - Color manager support
   - More atomic patches
   - GEM improvements
   - GuC fw loading fixes
   - DP detection fixes
   - SKL GPU hang fixes
   - Lots of BXT fixes

  radeon/amdgpu:
   - Initial Polaris support
   - GPUVM/Scheduler/Clock/Power improvements
   - ASYNC pageflip support
   - New mesa feature support

  nouveau:
   - GM108 support
   - Power sensor support improvements
   - GR init + ucode fixes.
   - Use GPU provided topology information

  vmwgfx:
   - Add host messaging support

  gma500:
   - Some cleanups and fixes

  atmel:
   - Bridge support
   - Async atomic commit support

  fsl-dcu:
   - Timing controller for LCD support
   - Pixel clock polarity support

  rcar-du:
   - Misc fixes

  exynos:
   - Pipeline clock support
   - Exynoss4533 SoC support
   - HW trigger mode support
   - export HDMI_PHY clock
   - DECON5433 fixes
   - Use generic prime functions
   - use DMA mapping APIs

  rockchip:
   - Lots of little fixes

  vc4:
   - Render node support
   - Gamma ramp support
   - DPI output support

  msm:
   - Mostly cleanups and fixes
   - Conversion to generic struct fence

  etnaviv:
   - Fix for prime buffer handling
   - Allow hangcheck to be coalesced with other wakeups

  tegra:
   - Gamme table size fix"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1050 commits)
  drm/edid: add displayid detailed 1 timings to the modelist. (v1.1)
  drm/edid: move displayid validation to it's own function.
  drm/displayid: Iterate over all DisplayID blocks
  drm/edid: move displayid tiled block parsing into separate function.
  drm: Nuke ->vblank_disable_allowed
  drm/vmwgfx: Report vmwgfx version to vmware.log
  drm/vmwgfx: Add VMWare host messaging capability
  drm/vmwgfx: Kill some lockdep warnings
  drm/nouveau/gr/gf100-: fix race condition in fecs/gpccs ucode
  drm/nouveau/core: recognise GM108 chipsets
  drm/nouveau/gr/gm107-: fix touching non-existent ppcs in attrib cb setup
  drm/nouveau/gr/gk104-: share implementation of ppc exception init
  drm/nouveau/gr/gk104-: move rop_active_fbps init to nonctx
  drm/nouveau/bios/pll: check BIT table version before trying to parse it
  drm/nouveau/bios/pll: prevent oops when limits table can't be parsed
  drm/nouveau/volt/gk104: round up in gk104_volt_set
  drm/nouveau/fb/gm200: setup mmu debug buffer registers at init()
  drm/nouveau/fb/gk20a,gm20b: setup mmu debug buffer registers at init()
  drm/nouveau/fb/gf100-: allocate mmu debug buffers
  drm/nouveau/fb: allow chipset-specific actions for oneinit()
  ...
2016-05-23 11:48:48 -07:00
Linus Torvalds
a0d3c7c5c0 dmaengine updates for 4.7
This time round the update brings in following changes:
 
  - New tegra driver for ADMA device
  - Support for Xilinx AXI Direct Memory Access Engine and Xilinx AXI Central
    Direct Memory Access Engine and few updates to this driver.
  - New cyclic capability to sun6i and few updates.
  - Slave-sg support in bcm2835.
  - Updates to many drivers like designware, hsu, mv_xor, pxa, edma,
    qcom_hidma & bam.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXPVb9AAoJEHwUBw8lI4NHnDQP/AtUYBTI8XD68iGh5eCTEtwO
 3dNgUmOvIAIl0ZtVKex3b7j2S52IN7EDv44QmsmvMHgjvaupUsZ/HeIHgoI37y39
 /qoRkyiG75ht68BrNjKcpJLsOyxaAUT1tMyf/bYXlDW8O7qEPtRDhuvUB+i+s3RX
 ljNOQXH2WaQTJrNeZxkvbp92iGiu3j7AKyCh9MJ4gnF4y2oA1bFp++QpH5qcBOTp
 0nccs7pgDQhw2nzHmhYbEmvgcKPrPQi+67U7eIed7n7wiThAIXIEbZl6AYk9kFaK
 gSa4/N3fwnZc9TFR5O6qdanvsYdW4JC1P5Ydm0opExo3lgtMckQ3sGKFIwTG8eU4
 YiyQE1uVHRqT82zxPCecTF+I0Y4g68oCJURrHED6kxKGA5a8ojU04aGebXDiNKlp
 FEDceEC5ch7ZPw8CCTola+TYpf9Vni3g7OkrdkPY9cX/aDXDROghTCg9jgPJ2aL/
 oai5axc5gQMEFzHPaEwFp45tgXw7IvIzaqYHmiWE11fsRbGUSB2HAwBXytI9ReC0
 XTMBvc08YvisbIpIR29T0R5cerzdDuK9bXxYHHHOeUFg0t8R8UGaP1UxEQCVmLsT
 AIrHupoccPJ7IAn0h6mShtZ2yzBfj3rU4tEMJR/Oj/VvjW3gKbbZ5XVi92fOurBs
 xjn9uBBZ/Pt9hgprwlmY
 =0Sy7
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This time round the update brings in following changes:

   - new tegra driver for ADMA device

   - support for Xilinx AXI Direct Memory Access Engine and Xilinx AXI
     Central Direct Memory Access Engine and few updates to this driver

   - new cyclic capability to sun6i and few updates

   - slave-sg support in bcm2835

   - updates to many drivers like designware, hsu, mv_xor, pxa, edma,
     qcom_hidma & bam"

* tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (84 commits)
  dmaengine: ioatdma: disable relaxed ordering for ioatdma
  dmaengine: of_dma: approximate an average distribution
  dmaengine: core: Use IS_ENABLED() instead of checking for built-in or module
  dmaengine: edma: Re-evaluate errors when ccerr is triggered w/o error event
  dmaengine: qcom_hidma: add support for object hierarchy
  dmaengine: qcom_hidma: add debugfs hooks
  dmaengine: qcom_hidma: implement lower level hardware interface
  dmaengine: vdma: Add clock support
  Documentation: DT: vdma: Add clock support for dmas
  dmaengine: vdma: Add config structure to differentiate dmas
  MAINTAINERS: Update Tegra DMA maintainers
  dmaengine: tegra-adma: Add support for Tegra210 ADMA
  Documentation: DT: Add binding documentation for NVIDIA ADMA
  dmaengine: vdma: Add Support for Xilinx AXI Central Direct Memory Access Engine
  Documentation: DT: vdma: update binding doc for AXI CDMA
  dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine
  Documentation: DT: vdma: update binding doc for AXI DMA
  dmaengine: vdma: Rename xilinx_vdma_ prefix to xilinx_dma
  dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC
  dmaengine: mv_xor: Allow selecting mv_xor for mvebu only compatible SoC
  ...
2016-05-19 11:47:18 -07:00
Alexey Brodkin
776d7f1694 arc: axs103_smp: Fix CPU frequency to 100MHz for dual-core
The most recent release of AXS103 [v1.1] is proven to work
at 100 MHz in dual-core mode so this change uses mentioned feature.
For that we:
 * Update axc003_idu.dtsi with mention of really-used CPU clock freq
 * Remove clock override in AXS platform code for dual-core HW

Note we're still leaving a hack for clock "downgrade" on early boot
for quad-core hardware.

Also note this change will break functionality of AXS103 v1.0 hardware.
That means all users of AXS103 __must__ upgrade their boards with the
most recent firmware.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-18 10:50:18 +05:30
Dave Airlie
76e9cab540 Merge branch 'topic-arcpgu-updates' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux into drm-next
Please pull this mini-series that allows ARC PGU to use
dedicated memory location as framebuffer backing storage.

* 'topic-arcpgu-updates' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux:
  ARC: [axs10x] Specify reserved memory for frame buffer
  drm/arcpgu: use dedicated memory area for frame buffer
2016-05-17 06:36:08 +10:00
Jose Abreu
445a642142 arc: axs10x: Add DT bindings for I2S PLL Clock
Add device tree bindings for AXS10X I2S PLL Clock driver.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
2016-05-13 18:33:39 +05:30
Noam Camus
845033be00 ARC: [plat-eznps] Add eznps board defconfig and dts
Adding default configuration file and DTS file

Signed-off-by: Noam Camus <noamc@ezchip.com>
2016-05-09 09:32:32 +05:30
Vineet Gupta
7ec9f34a03 ARC: [dts] Introduce Timer bindings
ARC Timers have historically been probed directly.
As precursor to start probing Timers thru DT introduce these bindings
Note that to keep series bisectable, these bindings are not yet used in
code.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:29 +05:30
Vineet Gupta
b3d6aba8bd ARC: [dts] Add clk feeding into timers to DTs
This allows us to introduce timers in DT in next commit

The core clk frequency hack in AXS103 platform is also extended,
where the core clk feeding into timers is updated in-place in FDT.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:29 +05:30
Vineet Gupta
9ba7648cc9 ARC: [dts] Rename cpu_intc -> core_intc
This is again for future changes to use common DTSI for timers which
refer to @core_intc

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:29 +05:30
Vineet Gupta
2e8cd93877 ARCv2: [dts]: Introduce HS38 specific include DTS ...
... and add them to plat-sim DTS.

This allows for future change to introduce timers in DT in single place

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09 09:32:29 +05:30
Dave Airlie
bafb86f5bc Linux 4.6-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXL7HfAAoJEHm+PkMAQRiGYe8IAJBGaPUq38EJh2YOV+AQf9v6
 t/alhwB3DUE1E0zjLy7I7JJ+xDXtKjZh9fS6OFuIS8Q3RIrBteIJ/oH8TPpt7yZ/
 SnP6rYPvYD6CImTyrh7+ORL/udEwJX8+YqFYAgUAq167gvpDjYj8r26VzdIaIN4/
 oBbL8NrQNWfODieywYyhUoitVhwMz09zmBfLtGVks4vd2jUJk2Fdd9cOtGV5tRfk
 DPndPgyQtbr8W0mKovV8sT9WkQeV5TsUr4MLgf7hjnAGYQ8+0KamkzzVVLBeBiiw
 uazyrOCFkddZp+N7KbmbOmazV/yULRuLGgDjVKazoCsOaKOvoGCzrCk7daOPy6Q=
 =CegX
 -----END PGP SIGNATURE-----

Merge tag 'v4.6-rc7' into drm-next

Merge this back as we've built up a fair few conflicts, and I have
some newer trees to pull in.
2016-05-09 13:49:56 +10:00
Andy Shevchenko
2e65060e80 dmaengine: dw: revisit data_width property
There several changes are done here:

- Convert the property to be in bytes

  Besides that this is a common practice for such property, the use of a value
  in bytes much more convenient than handling the encoded one.

- Rename data_width to data-width in the device tree bindings

  The change leaves the support for the old format as well just in case someone
  will use a newer kernel with an old device tree blob.

- While here, replace dwc_fast_ffs() by __ffs()

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-02 15:30:47 +05:30
Alexey Brodkin
cb2ad5e533 ARC: [axs10x] Specify reserved memory for frame buffer
Allocation of a frame buffer memory in a special memory region
allows bypassing of so-called IO Coherency aperture
which is typically set as a range 0x8z-0xAz.

I.e. all data traffic to PGU bypasses IO Coherency block
and saves its bandwidth for other peripherals.

Even though for AXS101 (which sorts ARC770 CPU) IOC is not
an option for a sake of keeping one DT description for the
base-board (axs10x_mb.dtsi) we're still defining reserved
memory location in the very end of DDR.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Cc: devicetree@vger.kernel.org
2016-04-29 14:34:13 +03:00
Alexey Brodkin
b8c1eca1e0 arc: axs10x - add support of ARC PGU
Synopsys DesignWare ARC SDP boards sport ARC SDP display
controller attached to ADV7511 HDMI encoder.

That change adds desctiption of both ARC PGU and ADV7511 in
ARC SDP'd base-board Device Tree.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: devicetree@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
2016-04-26 18:26:54 +03:00
Vineet Gupta
6dc97ee6d9 Revert "ARC: [plat-axs10x] add Ethernet PHY description in .dts"
This reverts commit 667a490bdb.

This is needed to get ethernet(stmmac) working in 4.6-rc2 on axs103.

4.5 needed this fix, but apprently stmmac has gained some fixes which
warrant reversal of this.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-04-07 14:59:09 +05:30
Alexey Brodkin
667a490bdb ARC: [plat-axs10x] add Ethernet PHY description in .dts
Commit e34d65696d ("stmmac: create of compatible mdio bus for stmmac
driver") broke DW GMAC functionality on ARC AXS10x boards:

That's what happens on eth0 up:
  --------------------------->8------------------------
| libphy: PHY stmmac-0:ffffffff not found
| eth0: Could not attach to PHY
| stmmac_open: Cannot attach to PHY (error: -19)
  --------------------------->8------------------------

Simplest solution is to add PHY description in board's .dts.
And so we do here.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Phil Reid <preid@electromag.com.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 4.5
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-17 17:45:18 +05:30
Lada Trimasova
df420fd688 arc: [plat-nsimosci*] use ezchip network driver
Since ezchip network driver was adapted to little endian architecture
this patch provides the corresponding arch/arc/{boot/dts,configs}/ updates so
we can switch over to this device-model/driver for OSCI platform.

Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Lada Trimasova <ltrimas@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-15 16:05:59 +05:30
Vineet Gupta
0b291635fc ARC: [plat-nsim] document ranges
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-12 11:58:44 +05:30
Vineet Gupta
ff1c0b6a79 ARC: [plat-sim] unbork non default CONFIG_LINUX_LINK_BASE
HIGHMEM support bumped the default memory size for nsim platform to 1G.
Thus total memory ended at the very edge of start of peripherals address
space. With linux link base shifted, memory started bleeding into
peripheral space which caused early boot bad_page spew !

Fixes: 29e332261d ("ARC: mm: HIGHMEM: populate high memory from DT")
Reported-by: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-17 11:06:43 +05:30
Alexey Brodkin
6d1a2adef7 ARC: [axs10x] cap ethernet phy to 100 Mbit/sec
Current ARC SDP boards cannot reliably handle 1Gbit
Ethernet connections due to limitations in hardware.

To make sure networking is stable on the board we're
limiting phy to 100 Mbit.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-07 19:40:03 +05:30
Linus Torvalds
9bbd4b9f38 DeviceTree updates for 4.4:
- DT binding doc consolidation moving similar bindings to common
   locations. The majority of these are display related which were
   scattered in video/, fb/, drm/, gpu/, and panel/ directories.
 - Add new config option, CONFIG_OF_ALL_DTBS, to enable building all dtbs
   in the tree for most arches with dts files (except powerpc for now).
 - OF_IRQ=n fixes for user enabled CONFIG_OF.
 - of_node_put ref counting fixes from Julia Lawall.
 - Common DT binding for wakeup-source and deprecation of all similar
   bindings.
 - DT binding for PXA LCD controller.
 - Allow ignoring failed PCI resource translations in order to ignore
   64-bit addresses on non-LPAE 32-bit kernels.
 - Support setting the NUMA node from DT instead of only from parent
   device.
 - Couple of earlycon DT parsing fixes for address and options.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWO+HwAAoJEPr7XbWNvGHDFOoP/RcK4z5dtVQL2XRFbJBqRBZU
 riMc4BZkwpcKGXjzZlMrLw+mg4vaoLKSIAGAsYkgdDOKbYphQQdVwDzN099Fzpzy
 EE6K7Q+AW618z34AWdDjcpJYzSFnjAjYdh6JabohmKdPlxobR1RsKT+nRpDOGfeO
 c1DmxAQ1Fiav+xAI4m0YUuyxQDUeFYC0mVcVPzRbWZj31Ia5BgIrvT+V7fM55CTb
 dOAYWDHrfOw+yYI98sqZoSAb5H+E3UuY1ymBMhiP16Ot2vCyIKRYwhDokF9VYO/0
 MpIMhCgv1jmE5NCbBeYSSJUePySvvnuyYe6HIaJQjV8KGEZ5C7c1iLMgtvov2KVI
 bcSx6nPH/u5FuWIhWdMINPc50AQBAK/akYcgoCVjioVX+4WY2pqLvsXW2arEr//Z
 XY3FUpgS6eI42HBsj4SxrGnzaRc2jPOs6yiANkywmHnpWcyvszCxUEvf0Mh0cbkm
 diu31/owdpUO5imCe+ErtGVV3vY2VUMnbcm8J61pqL52OZNPLZUUEfktv1JCGW7y
 cVdnlgeGSFuCbY4jUErvxtQGJQLFwf7Gg1U/VfFXX2iuQGAACB1KwxY5sR6P5Ghz
 W6NvOTT36kaM9WGqn/bquOd6EmKcx9aZfgRLOkgV86Q/11gHKpuRjkrsth7rIJDI
 97qkGiWl4t1Ll5T4StK8
 =tGCy
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "A fairly large (by DT standards) pull request this time with the
  majority being some overdue moving DT binding docs around to
  consolidate similar bindings.

   - DT binding doc consolidation moving similar bindings to common
     locations.  The majority of these are display related which were
     scattered in video/, fb/, drm/, gpu/, and panel/ directories.

   - Add new config option, CONFIG_OF_ALL_DTBS, to enable building all
     dtbs in the tree for most arches with dts files (except powerpc for
     now).

   - OF_IRQ=n fixes for user enabled CONFIG_OF.

   - of_node_put ref counting fixes from Julia Lawall.

   - Common DT binding for wakeup-source and deprecation of all similar
     bindings.

   - DT binding for PXA LCD controller.

   - Allow ignoring failed PCI resource translations in order to ignore
     64-bit addresses on non-LPAE 32-bit kernels.

   - Support setting the NUMA node from DT instead of only from parent
     device.

   - Couple of earlycon DT parsing fixes for address and options"

* tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits)
  MAINTAINERS: update DT binding doc locations
  devicetree: add Sigma Designs vendor prefix
  of: simplify arch_find_n_match_cpu_physical_id() function
  Documentation: arm: Fixed typo in socfpga fpga mgr example
  Documentation: devicetree: fix reference to legacy wakeup properties
  Documentation: devicetree: standardize/consolidate on "wakeup-source" property
  drivers: of: removing assignment of 0 to static variable
  xtensa: enable building of all dtbs
  mips: enable building of all dtbs
  metag: enable building of all dtbs
  metag: use common make variables for dtb builds
  h8300: enable building of all dtbs
  arm64: enable building of all dtbs
  arm: enable building of all dtbs
  arc: enable building of all dtbs
  arc: use common make variables for dtb builds
  of: add config option to enable building of all dtbs
  of/fdt: fix error checking for earlycon address
  of/overlay: add missing of_node_put
  of/platform: add missing of_node_put
  ...
2015-11-06 12:17:09 -08:00
Vineet Gupta
29e332261d ARC: mm: HIGHMEM: populate high memory from DT
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-28 19:50:26 +05:30
Vineet Gupta
f759ee57b2 ARC: Ensure DT mem base is same as what kernel is built with
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-28 16:13:42 +05:30
Rob Herring
b83abc8c2c arc: enable building of all dtbs
Enable building all dtb files when CONFIG_OF_ALL_DTBS is enabled. The dtbs
are not really dependent on a platform being enabled or any other kernel
config, so for testing coverage it is convenient to build all of the dtbs.
This builds all dts files in the tree, not just targets listed.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-27 16:12:13 -05:00
Rob Herring
10375ccc67 arc: use common make variables for dtb builds
Use dtb-y and always make variables to build dtbs instead of explicit
dtbs rule. This is in preparation to support building all dtbs.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-27 16:12:13 -05:00
Vineet Gupta
090749502f ARC: add/fix some comments in code - no functional change
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-20 19:05:49 +05:30
Alexey Brodkin
e2fc61f384 ARCv2: [axs103] bump CPU frequency from 75 to 90 MHZ
With up-to-date FPGA builds ARC cores are supposed to correctly operate
even with 90 MHz clock (which is a target frequency for AXS103 release).

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-linux-dev@synopsys.com
2015-07-09 17:36:31 +05:30
Ruud Derwig
2924cd18c4 ARCv2: [vdk] dts files and defconfig for HS38 VDK
- CONFIG_ARC_UBOOT_SUPPORT to handle arguments passed in r0, r1, r2
 - CONFIG_DEVTMPFS_MOUNT for mouting rootfs since it uses external cpio
   for rootfs

Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Ruud Derwig <rderwig@synopsys.com>
[vgupta: folded the Main baord DT files for smp/up into one]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-25 06:00:21 +05:30
Vineet Gupta
5fa2daaa8d ARCv2: [axs103] Support ARC SDP FPGA platform for HS38x cores
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-25 06:00:20 +05:30
Alexey Brodkin
e0183f5230 ARC: [axs101] Prepare for AXS103
To avoid duplicating the MB DTS file, move the MB intc entry into cpu
card specific file

Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-25 06:00:20 +05:30
Vineet Gupta
a12ebe16a5 ARCv2: [nsim*hs*] Support simulation platforms for HS38x cores
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-25 06:00:19 +05:30
Alexey Brodkin
7cacc5bf60 ARC: [axs101] STAR 9000799830: Fix SD cards support
As DW Mobile Storage databook says it's required to use "Hold Register"
if card is enumerated in SDR12 or SDR25 modes.
It means we need to act in the same way as in Altera's Socfpga
implementation - set "use hold reg" bit in commad.

Note that for upstream proper solution would be to remove
dw_mci_pltfm_prepare_command() at all and set the bit right in
dw_mci_prepare_command() for all platforms.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19 18:09:31 +05:30
Vineet Gupta
8d0d56ba24 ARC: [axs101] support early 8250 uart
Earlycon calculates UART clock as "BASE_BAUD * 16". In case of ARC
"BASE_BAUD" is calculated dynamically in runtime, basically it is an
alias to arc_early_base_baud(), which in turn just does
"arc_base_baud/16".

8250 UART on AXS/SDP board uses 33.3MHz clock source which is set in
"arc_base_baud" with this change.

Additional compatibility string "snps,arc-sdp" is introduced as well
because there're different flavours of AXS boards but they all share the
same motherboard and so it's possible to re-use the same code for
motherbord even if CPU daughterboard changes.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19 18:09:30 +05:30
Alexey Brodkin
556cc1c5f5 ARC: [axs101] Add support for AXS101 SDP (software development platform)
The AXS10x platforms consist of a mainboard with peripherals,
on which several daughter cards can be placed. The daughter cards
typically contain a CPU and memory.

Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19 18:09:30 +05:30
Vineet Gupta
fd1557923b ARC: [plat_arcfpga]->[plat_sim]
* Remove remanants of legacy ARC FPGA platforms (AA4, ML509...)
* Only nsim simulation platform is left, rename platform accordingly
* AA4 DT stuff is compatible with nsim for ARC700 so rename it too

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19 18:09:26 +05:30
Vineet Gupta
30fdd373f2 ARC: perf: Rename DT binding to not confuse with power mgmt
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-04-20 18:27:36 +05:30
Andy Shevchenko
d8ded50f8b dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
Instead of using magic number in the code the patch provides
DW_DMA_MAX_NR_MASTERS constant.

While here, restrict the reading of data width array by amount of the actual
number of AHB masters.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-04 22:39:44 -08:00
Vineet Gupta
e8ef060b37 ARC: [nsimosci] move peripherals to match model to FPGA
This allows the sdplite/Zebu images to run on OSCI simulation platform

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: <stable@vger.kernel.org> #3.10, 3.12, 3.14, 3.16
2014-12-15 11:24:58 +05:30
Vineet Gupta
5c05483e2d ARC: [nsimosci] Allow "headless" models to boot
There are certain test configuration of virtual platform which don't
have any real console device (uart/pgu). So add tty0 as a fallback console
device to allow system to boot and be accessible via telnet

Otherwise with ttyS0 as only console, but 8250 disabled in kernel build,
init chokes.

Reported-by: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: <stable@vger.kernel.org> #3.10, 3.12, 3.14, 3.16
2014-10-13 14:46:15 +05:30
Vineet Gupta
70e956483e ARC: [arcfpga] consolidate machine description, DT
* AA4/ML509 have same machine descriptions
* Rename simulation machine description

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-10-13 14:46:12 +05:30
Greg Kroah-Hartman
22524b02b1 Revert "ARC: [arcfpga] stdout-path now suffices for earlycon/console"
This reverts commit 9da433c0a0.

Vineet writes:

Could you please revert this single patch from tty-next for 3.17 as the
needed core changes are not yet finalized.

Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-27 23:10:43 -07:00
Vineet Gupta
9da433c0a0 ARC: [arcfpga] stdout-path now suffices for earlycon/console
With recent improvements to serial/of core from Grant and Rob,
stdout-path alone suffices for setting up earlycon/console.

arc_uart driver is already equipped to handle that, switch the DT now.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10 15:45:30 -07:00
Vineet Gupta
2e6fb7cbd0 serial/arc: remove earlyprintk support and switch to earlycon
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10 15:43:27 -07:00
Vineet Gupta
e87a850b9c ARC: [arcfpga] Early ARC UART to be only activated by cmdline
Earlier CONFIG_SERIAL_ARC_CONSOLE would unconditionally enable the
legacy ARC UART based early console even if platform lacked that UART
(e.g. nSIM OSCI platform).

So a multi-platform image containing the 2 UART drivers won't work.

Fix that by probing the driver only if "earlyprintk=ttyARC0" is present
in cmdline.

Reported-by: Chuck Jordan <cjordan@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-06-03 14:20:09 +05:30
Vineet Gupta
61fb4bfc01 ARC: [nsimosci] Unbork console
Despite the switch to right UART driver (prev patch), serial console
still doesn't work due to missing CONFIG_SERIAL_OF_PLATFORM

Also fix the default cmdline in DT to not refer to out-of-tree
ARC framebuffer driver for console.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: <stable@vger.kernel.org>   #3.10, 3.12, 3.13, 3.14
Cc: Francois Bedard <Francois.Bedard@synopsys.com>
2014-04-05 18:36:51 +05:30
Mischa Jonker
6eda477b3c ARC: [nsimosci] Change .dts to use generic 8250 UART
The Synopsys APB DW UART has a couple of special features that are not
in the System C model. In 3.8, the 8250_dw driver didn't really use these
features, but from 3.9 onwards, the 8250_dw driver has become incompatible
with our model.

Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: <stable@vger.kernel.org>   #3.10, 3.12, 3.13, 3.14
Cc: Francois Bedard <Francois.Bedard@synopsys.com>
2014-04-05 18:36:45 +05:30