Commit Graph

9 Commits

Author SHA1 Message Date
Maxime Ripard
e5496a31d9 ARM: sun7i: Add the pin muxing options for the I2C controllers
The A20 boards we currently have share the same pins for the i2c
controllers they share. Add them to the DTSI.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-18 11:35:37 -05:00
Maxime Ripard
428abbb8b8 ARM: sun7i: Enable the I2C controllers
The Allwinner A20 shares the same I2C controller than the one that could
be found on earlier SoCs from Allwinner. There is only a few more of
these controllers. Add all of them in the DTSI.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-18 11:35:37 -05:00
Oliver Schinagl
2bad969f78 ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i
This patch shall add support for the sunxi-sid driver to the device
tree for A10, A10s, A13 and A20.

Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-16 18:22:12 -05:00
Maxime Ripard
756084c50c ARM: dts: sun7i: Add the muxing options for the EMAC
The A20 has several muxing options for the EMAC. Yet, the currently
supported boards only use one set of them. Add that pin set to the DTSI.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-12 12:22:39 -07:00
Maxime Ripard
2e804d03d2 ARM: dts: sun7i: Enable the Ethernet in the A20
The Allwinner A20 SoC also have the EMAC found on the A10 and A10s.
Enable the support for it in the DTSI.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-12 12:22:32 -07:00
Maxime Ripard
de7dc93555 ARM: sun7i: Enable the A20 clocks in the DTSI
Now that the clock driver knows about the available clocks found on the
A20, we can build up the clock tree from the device tree.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-26 10:51:19 +02:00
Maxime Ripard
9f229ba957 ARM: sun7i: DT: Add UART muxing options to the DTSI
The UARTs on the A20 can be muxed to several pins. Add a few options to
the DTSI so that we can start using them in the boards' DT.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-22 00:19:18 +02:00
Maxime Ripard
17eac031b7 ARM: sun7i: Add the PIO controller node to the DTSI
The PIO controller is responsible for the GPIO/muxing/external
interrupts handling. Now that we have support for the A20 pin set in the
pinctrl driver, we can start using it in the DTSI.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-22 00:19:17 +02:00
Maxime Ripard
4790ecfa99 ARM: sun7i: Add Allwinner A20 DTSI
The Allwinner A20 SoC is based on 2 Cortex A7, an ARM Mali GPU, and is
built to be pin-compatible with the older Allwinner A10.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-20 08:18:43 +02:00