Adds debugfs access to registers in the Cannon Point PCH PMC that are
useful for debugging #SLP_S0 signal assertion and other low power relate
activities. Device pm states are latched in these registers whenever the
package enters C10 and can be read from slp_s0_debug_status. The pm
states may also be latched by writing 1 to slp_s0_dbg_latch which will
immediately capture the current state on the next read of
slp_s0_debug_status.
Signed-off-by: Box, David E <david.e.box@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Not only silead touchscreens need some extra info not available in the
ACPI tables to work properly. X86 devices with a Chipone ICN8505 chip also
need some DMI based extra configuration.
There is no reason to have separate dmi config code per touchscreen
controller vendor. This commit renames silead_dmi to a more generic
touchscreen_dmi name (and Kconfig option) in preparation of adding
info for tablets with an ICN8505 based touchscreen.
Note there are no functional changes all code changes are limited to
removing references to silead where these are no longer applicable.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add touchscreen info for the 10" Chuwi Vi10 (CWI505) tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We have so much entries now that it is good to bring some form of order
to them. This should also reduce conflicts when multiple patches make
changes at the same time (compared to tagging all new entries at the end).
Note this commit purely moves stuff around and adds 2 comments about
keeping the data and table alphabetically sorted. There are no functional
changes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Prefix the entries for trekstor tablets with trekstor_ and drop the
detailed model version (still available as comment in the dmi table)
to keep things within 80 chars.
This is a preparation patch for sorting all the entries alphabetically.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The function dell_smbios_smm_call and pointer platform_device are
local to the source and do not need to be in global scope, so make
them static.
Cleans up sparse warnings:
warning: symbol 'platform_device' was not declared. Should it be static?
warning: symbol 'dell_smbios_smm_call' was not declared. Should it be
static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
The commit 5d9f40b566 ("platform/x86: ideapad-laptop: Add
Y520-15IKBN to no_hw_rfkill") added the entry for Y20-15IKBN, and it
turned out that another variant, Y20-15IKBM, also requires the
no_hw_rfkill.
Trim the last letter from the string so that it matches to both
Y20-15IKBN and Y20-15IKBM models.
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1098626
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Some Dell servers can use dell-smbios but they don't support the
token interface. Make it optional.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
The P52 has a keyboard which features a calculator key above the numpad.
Add support for this the calculator key (0x1313).
Signed-off-by: Benjamin Berg <bberg@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Second generation keyboard backlight (type 2) laptops can switch
on the keyboard LED on their own via hardware/firmware, but the
LED subsystem is unaware of such change since the LED interface
was only being created on first generation keyboard backlight
(type 1) laptops.
This patch creates the LED interface for second gen keyboards
and calls the *_hw_changed API whenever userspace changes the
state of the keyboard backlight LED.
While we are at it, remove an unneeded asignment to the acpi_dev
struct under *_kbd_bl_work, and also update the kbd_event_generated
variable in the main toshiba struct instead of the global struct.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
[dvhart: correct int* and int compare with dev->kbd_mode]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
The probe handler_data was being allocated with __get_free_pages()
for no reason I could find. The error path was using kfree(). Since
other things are happily using kmalloc() in the probe path, switch to
kmalloc() entirely. This fixes the error path mismatch and will avoid
issues with CONFIG_HARDENED_USERCOPY_PAGESPAN=y.
Reported-by: Mihai Donțu <mihai.dontu@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Mario Limonciello <Mario.limonciello@dell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Add mlxreg-io platform driver activation. Access driver uses the same
regmap infrastructure as others Mellanox platform drivers.
Specific registers description for default platform data configuration are
added to mlx-platform. There are the registers for resets control, reset
causes monitoring, programmable devices version reading and mux select
control. This platform data is passed to mlxreg-io driver. Also some
default values for the register are set at initialization time through
the regmap infrastructure, which are necessary for moving write protection
from the general purpose registers, which are used by mlxreg-io for
write access.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
v4-v5:
Changes added by Vadim:
- Add two new attributes for ASIC health and main power domain shutdown.
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Introduce new Mellanox platform driver to allow access to Mellanox
programmable device register space trough sysfs interface.
The driver purpose is to provide sysfs interface for user space for the
registers essential for system control and monitoring.
The sets of registers for sysfs access are supposed to be defined per
system type bases and include the registers related to system resets
operation, system reset causes monitoring and some kinds of mux selection.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
[dvhart: Kconfig typo fixes spotted by Randy Dunlap]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Original submission was GPLv2 only, so mark as GPL-2.0.
Also restored some descriptive lines that were there before.
Signed-off-by: Benson Leung <bleung@chromium.org>
As files move around, their previous links break. Fix the
references for them.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Several incremental improvements including new keycodes, new models, new
quirks, and related documentation. Adds LED platform driver activation
for Mellanox systems. Some minor optimizations and cleanups. Includes
several bug fixes, message silencing, mostly minor.
The following commits were previously merged during the 4.17 RC cycle:
- 06b8b00b33 platform/x86: asus-wireless: Fix NULL pointer dereference
- 6ed66c3ce0 platform/x86: Kconfig: Fix dell-laptop dependency chain.
- 74783c99bf platform/x86: DELL_WMI use depends on instead of select for DELL_SMBIOS
- cf48bf9eee platform/x86: asus-wmi: Fix NULL pointer dereference
The following is an automated git shortlog grouped by driver:
acer-wmi:
- add another KEY_POWER keycode
apple-gmux:
- fix gmux_get_client_id()'s return type
asus-laptop:
- Simplify getting .drvdata
asus-wireless:
- Fix format specifier
dell-laptop:
- Fix keyboard backlight timeout on XPS 13 9370
dell-smbios:
- Match on www.dell.com in OEM strings too
dell-wmi:
- Ignore new rfkill and fn-lock events
- Set correct keycode for Fn + left arrow
fujitsu-laptop:
- Simplify soft key handling
ideapad-laptop:
- Add E42-80 to no_hw_rfkill
- Add fn-lock setting
- Add MIIX 720-12IKB to no_hw_rfkill
lib/string_helpers:
- Add missed declaration of struct task_struct
intel_scu_ipc:
- Replace mdelay with usleep_range in intel_scu_ipc_i2c_cntrl
mlx-platform:
- Add LED platform driver activation
platform/mellanox:
- Add new ODM system types to mlx-platform
- mlxreg-hotplug: add extra cycle for hotplug work queue
- mlxreg-hotplug: Document fixes for hotplug private data
platform_data/mlxreg:
- Document fixes for hotplug device
silead_dmi:
- Add entry for Chuwi Hi8 tablet touchscreen
- Add touchscreen info for the Onda V891w tablet
- Add info for the PoV mobii TAB-P800W (v2.0)
- Add touchscreen info for the Jumper EZpad 6 Pro
thinkpad_acpi:
- silence false-positive-prone pr_warn
- do not report thermal sensor state for tablet mode switch
- silence HKEY 0x6032, 0x60f0, 0x6030
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbIFzqAAoJEKbMaAwKp3644JcIAJ8iBMobacNWjIJvPJ8ytwLE
NUP7/W/8NUXkwnxXzURorlnoO6Uj4+54c+QfO+HQV/+Y46fJaX9x2tWRtcEkpJU3
L6c59kYAMlu5rN5ekCcQex4FKL8Pd7q6QpF8KZtP8gw2ujUEeGA1m/qcTmUlkOQF
AFfbSFJtmMOinbL5ufkaW7Gu91EVFhuvgIoK/XdOhwAbyYAPEbtttKlUjkZGx6GU
iJbpimcmdtfXBqMzvpOHw/4EUXLwgDVr1F8PdGmvEHyK45SHIZcK936Ihiq+CjVA
USFKZhMMYU4sifI77pIP9Trftm+FdaLnPumGVj836OMp1+k10YBy1hDIGwI6i68=
=+O74
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.18-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
"Several incremental improvements including new keycodes, new models,
new quirks, and related documentation. Adds LED platform driver
activation for Mellanox systems. Some minor optimizations and
cleanups. Includes several bug fixes, message silencing, mostly minor
Automated summary:
acer-wmi:
- add another KEY_POWER keycode
apple-gmux:
- fix gmux_get_client_id()'s return type
asus-laptop:
- Simplify getting .drvdata
asus-wireless:
- Fix format specifier
dell-laptop:
- Fix keyboard backlight timeout on XPS 13 9370
dell-smbios:
- Match on www.dell.com in OEM strings too
dell-wmi:
- Ignore new rfkill and fn-lock events
- Set correct keycode for Fn + left arrow
fujitsu-laptop:
- Simplify soft key handling
ideapad-laptop:
- Add E42-80 to no_hw_rfkill
- Add fn-lock setting
- Add MIIX 720-12IKB to no_hw_rfkill
lib/string_helpers:
- Add missed declaration of struct task_struct
intel_scu_ipc:
- Replace mdelay with usleep_range in intel_scu_ipc_i2c_cntrl
mlx-platform:
- Add LED platform driver activation
platform/mellanox:
- Add new ODM system types to mlx-platform
- mlxreg-hotplug: add extra cycle for hotplug work queue
- mlxreg-hotplug: Document fixes for hotplug private data
platform_data/mlxreg:
- Document fixes for hotplug device
silead_dmi:
- Add entry for Chuwi Hi8 tablet touchscreen
- Add touchscreen info for the Onda V891w tablet
- Add info for the PoV mobii TAB-P800W (v2.0)
- Add touchscreen info for the Jumper EZpad 6 Pro
thinkpad_acpi:
- silence false-positive-prone pr_warn
- do not report thermal sensor state for tablet mode switch
- silence HKEY 0x6032, 0x60f0, 0x6030"
* tag 'platform-drivers-x86-v4.18-1' of git://git.infradead.org/linux-platform-drivers-x86: (30 commits)
platform/x86: silead_dmi: Add entry for Chuwi Hi8 tablet touchscreen
platform/x86: dell-laptop: Fix keyboard backlight timeout on XPS 13 9370
platform/x86: dell-wmi: Ignore new rfkill and fn-lock events
platform/x86: mlx-platform: Add LED platform driver activation
platform/mellanox: Add new ODM system types to mlx-platform
platform/mellanox: mlxreg-hotplug: add extra cycle for hotplug work queue
platform/x86: ideapad-laptop: Add E42-80 to no_hw_rfkill
platform/x86: silead_dmi: Add touchscreen info for the Onda V891w tablet
platform/x86: silead_dmi: Add info for the PoV mobii TAB-P800W (v2.0)
platform/x86: silead_dmi: Add touchscreen info for the Jumper EZpad 6 Pro
platform/x86: asus-wireless: Fix format specifier
platform/x86: asus-wmi: Fix NULL pointer dereference
platform/x86: dell-wmi: Set correct keycode for Fn + left arrow
platform/x86: acer-wmi: add another KEY_POWER keycode
platform/x86: ideapad-laptop: Add fn-lock setting
platform/x86: ideapad-laptop: Add MIIX 720-12IKB to no_hw_rfkill
lib/string_helpers: Add missed declaration of struct task_struct
platform/x86: DELL_WMI use depends on instead of select for DELL_SMBIOS
platform/mellanox: mlxreg-hotplug: Document fixes for hotplug private data
platform_data/mlxreg: Document fixes for hotplug device
...
Here is the big USB pull request for 4.18-rc1.
Lots of stuff here, the highlights are:
- phy driver updates and new additions
- usual set of xhci driver updates
- normal set of musb updates
- gadget driver updates and new controllers
- typec work, it's getting closer to getting fully out of the
staging portion of the tree.
- lots of minor cleanups and bugfixes.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWxba6w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykumQCg2abWE5LijR0SNJIwX8xk64HLUAMAnAxBZDG3
aB0GyOQd54L+09q4LAdn
=ZCEx
-----END PGP SIGNATURE-----
Merge tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and PHY updates from Greg KH:
"Here is the big USB pull request for 4.18-rc1.
Lots of stuff here, the highlights are:
- phy driver updates and new additions
- usual set of xhci driver updates
- normal set of musb updates
- gadget driver updates and new controllers
- typec work, it's getting closer to getting fully out of the staging
portion of the tree.
- lots of minor cleanups and bugfixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
Revert "xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue"
xhci: Add quirk to zero 64bit registers on Renesas PCIe controllers
xhci: Allow more than 32 quirks
usb: xhci: force all memory allocations to node
selftests: add test for USB over IP driver
USB: typec: fsusb302: no need to check return value of debugfs_create_dir()
USB: gadget: udc: s3c2410_udc: no need to check return value of debugfs_create functions
USB: gadget: udc: renesas_usb3: no need to check return value of debugfs_create functions
USB: gadget: udc: pxa27x_udc: no need to check return value of debugfs_create functions
USB: gadget: udc: gr_udc: no need to check return value of debugfs_create functions
USB: gadget: udc: bcm63xx_udc: no need to check return value of debugfs_create functions
USB: udc: atmel_usba_udc: no need to check return value of debugfs_create functions
USB: dwc3: no need to check return value of debugfs_create functions
USB: dwc2: no need to check return value of debugfs_create functions
USB: core: no need to check return value of debugfs_create functions
USB: chipidea: no need to check return value of debugfs_create functions
USB: ehci-hcd: no need to check return value of debugfs_create functions
USB: fhci-hcd: no need to check return value of debugfs_create functions
USB: fotg210-hcd: no need to check return value of debugfs_create functions
USB: imx21-hcd: no need to check return value of debugfs_create functions
...
Further changes from Dmitry related to the removal of platform data from
atmel_mxt_ts and chromeos_laptop. This time, we have some changes that
teach chromeos_laptop how to supply acpi properties for some input devices
so that the peripheral driver doesn't have to do dmi matching on some
Chromebook platforms.
Also adds the Chromebook Tablet switch driver, which is useful for x86
convertible Chromebooks.
Other misc. cleanup.
Thanks,
Benson
-----BEGIN PGP SIGNATURE-----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=mA72
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-for-linus-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform
Pull chrome platform updates from Benson Leung:
- further changes from Dmitry related to the removal of platform data
from atmel_mxt_ts and chromeos_laptop.
This time, we have some changes that teach chromeos_laptop how to
supply acpi properties for some input devices so that the peripheral
driver doesn't have to do dmi matching on some Chromebook platforms.
- new Chromebook Tablet switch driver, which is useful for x86
convertible Chromebooks.
- other misc cleanup
* tag 'chrome-platform-for-linus-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
platform/chrome: Use to_cros_ec_dev more broadly
platform/chrome: chromeos_laptop: fix touchpad button mapping on Celes
platform: chrome: Add input dependency for tablet switch driver
platform/chrome: chromeos_laptop - supply properties for ACPI devices
platform/chrome: chromeos_tbmc - add SPDX identifier
platform: chrome: Add Tablet Switch ACPI driver
platform/chrome: cros_ec_lpc: do not try DMI match when ACPI device found
The XPS 13 9370 doesn't expose the necessary KBD_LED_AC_TOKEN in
the BIOS, so the driver thinks it cannot adjust the AC keyboard
backlight timeout. This patch adds a quirk to fix this until
Dell adds the missing token to the BIOS.
For further discussion, see:
https://github.com/dell/libsmbios/issues/48
Signed-off-by: Timur Kristóf <venemo@fedoraproject.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are two new events generated by dell-wmi, rfkill and fn-lock, from
Dell Systems.
When Fn-lock hotkey gets pressed to switch to function mode:
[85951.591542] dell_wmi: Unknown key with type 0x0010 and code 0xe035
pressed
[85951.591546] dell_wmi: Unknown key with type 0x0010 and code 0x0000
pressed
When Fn-lock hotkey gets pressed to switch to multimedia mode:
[85956.667686] dell_wmi: Unknown key with type 0x0010 and code 0xe035
pressed
[85956.667690] dell_wmi: Unknown key with type 0x0010 and code 0x0001
pressed
When radio hotkey gets pressed:
[85974.430220] dell_wmi: Unknown key with type 0x0010 and code 0xe008
pressed
These events are for notification purpose, so we can ignore them.
This patch is tested on XPS 9370.
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add LED platform driver activation from mlx-platform. This LED driver uses
the same regmap infrastructure as others Mellanox platform drivers, so LED
specific registers description is added.
System LED configuration depends on system type. To support all the
relevant types per system type LED descriptions are defined for passing
to LED platform driver.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Add new ODM system types, matched according to DMI_BOARD_NAME. The
supported ODM Ids are: VMOD0001, VMOD0002, VMOD0003, VMOD0004, VMOD0005.
Patch does not introduce new systems, but allows to ODM companies to set
DMI_BOARD_VENDOR and DMI_PRODUCT_NAME on their own. It assumes that ODM
company can't change DMI_BOARD_NAME.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Add extra cycle for hotplug work queue to handle the case when a signal is
It adds missed logic for signal acknowledge, by adding an extra run for
received, but no specific signal assertion is detected. Such case
theoretically can happen for example in case several units are removed or
inserted at the same time. In this situation acknowledge for some signal
can be missed at signal top aggreagation status level. The extra run will
allow to handler to acknowledge the missed signal.
The interrupt handling flow performs the next steps:
(1)
Enter mlxreg_hotplug_work_handler due to signal assertion.
Aggregation status register is changed for example from 0xff to 0xfd
(event signal group related to bit 1).
(2)
Mask aggregation interrupts, read aggregation status register and save it
(0xfd) in aggr_cache, then traverse down to handle signal from groups
related to the changed bit.
(3)
Read and mask group related signal.
Acknowledge and unmask group related signal (acknowledge should clear
aggregation status register from 0xfd back to 0xff).
(4)
Re-schedule work queue for the immediate execution.
(5)
Enter mlxreg_hotplug_work_handler due to re-scheduling.
Aggregation status is changed from previous 0xfd to 0xff.
Go over steps (2) - (5) and in case no new signal assertion
is detected - unmask aggregation interrupts.
The possible race could happen in case new signal from the same group is
asserted after step (3) and prior step (5). In such case aggregation
status will change back from 0xff to 0xfd and the value read from the
aggregation status register will be the same as a value saved in
aggr_cache. As a result the handler will not traverse down and signal
will stay unhandled.
Example of faulty flow:
The signal routing flow is as following (f.e. for of FANi removing):
- FAN status and event registers related bit is changed;
-- intermediate aggregation status register is changed;
--- top aggregation status register is changed;
---- interrupt routed to CPU and interrupt handler is invoked.
When interrupt handler is invoked it follows the next simple logic (f.e
FAN3 is removed):
(a1) mask top aggregation interrupt mask register;
(a2) read top aggregation interrupt status register and test to which
underling group belongs a signal (FANs in this case and is changed
from 0xff to 0xfb and 0xfb is saved as a last status value);
(b1) mask FANs interrupt mask register;
(b2) read FANs status register and test which FAN has been changed
FAN3 in this example);
(c1) perform relevant action;
<--------------- (FAN2 is removed at this point)
(b3) clear FANs interrupt event register to acknowledge FAN3 signal;
(b4) unmask FANs interrupt mask register
(a3) unmask top aggregation interrupt mask register;
An interrupt handler is invoked, since FAN2 interrupt is not acknowledge.
It should set top aggregation interrupt status register bit 6 (0xfb).
In step (a2)
(a2) read top aggregation interrupt and comparing it with saved value
does not show change (same 0xfb) and after (a2) execution jumps to
(a3) and signal leaved unhandled
The fix will enforce handler to traverse down in case the signal is
received, but signal assertion is not detected.
Fixes: 304887041d ("platform/x86: Introduce support for Mellanox hotplug driver")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Lenovo Zhaoyang E42-80 is another Lenovo model without a hw rfkill switch,
resulting in wifi always reported as hard blocked.
Add the model to the list of models without rfkill switch.
Signed-off-by: dylanchu <chdy.uuid@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add touchscreen info for the Onda V891w 8.9" windows tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This commit adds the necessary device-properties to make the touchscreen
on Point of View mobii TAB-P800W (v2.0) tablets work.
Note that we already have an entry for the Point of View mobii
TAB-P800W (v2.1), that version uses a different digitizer and different
firmware, so the v2.0 version needs its own entry.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add touchscreen info for the Jumper EZpad 6 Pro.
Cc: zy <574249312@qq.com>
Reported-and-tested-by: zy <574249312@qq.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix NULL pointer dereference in asus-wmi on rfkill cleanup.
The following is an automated git shortlog grouped by driver:
asus-wmi:
- Fix NULL pointer dereference
-----BEGIN PGP SIGNATURE-----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=GJY6
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.17-4' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fix from Andy Shevchenko:
"Fix NULL pointer dereference in asus-wmi on rfkill cleanup.
The effective change is just one new condition - two lines of code.
But it required moving one static helper function, which is why the
diff looks a bit bigger"
* tag 'platform-drivers-x86-v4.17-4' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: asus-wmi: Fix NULL pointer dereference
u64 should be printed with %llx instead of %x and cast to uint.
Signed-off-by: João Paulo Rechi Vita <jprvita@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Move to_cros_ec_dev macro to cros_ec.h and use it when the private ec
object is needed from device object.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Celes has newer touch controller (compared to the controllers used in
older BayTrail-based devices) and so uses the same button mapping as
Samus.
This fixes the issue with mouse button being stuck in pressed state
after the first click.
Reported-by: Sultan Alsawaf <sultanxda@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
We should stop our worker thread while we're suspended. If we don't
then we'll get messages like:
cros-ec-spi spi5.0: spi transfer failed: -108
cros-ec-spi spi5.0: cs-deassert spi transfer failed: -108
cros-ec-ctl cros-ec-ctl.0.auto: EC communication failed
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The driver will not probe unless bq24190 is loaded, so
making it a dependency.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
BayTrail-based and newer Chromebooks describe their peripherals in ACPI;
unfortunately their description is not complete, and peripherals
drivers, such as driver for Atmel Touch controllers, has to resort to
DMI-matching to configure the peripherals properly. To avoid polluting
peripheral driver code, let's teach chromeos_laptop driver to supply
missing data via generic device properties.
Note we supply "compatible" string for Atmel peripherals not because it is
needed for matching devices and driver (matching is still done on ACPI HID
entries), but because peripherals driver will be using presence of
"compatible" property to determine if device properties have been attached
to the device, and fail to bind if they are absent.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Replace the original license statement with the SPDX identifier.
Add also one line of description as recommended by the COPYING file.
Signed-off-by: Benson Leung <bleung@chromium.org>
Add a kernel driver for GOOG0006, an ACPI driver reporting an event when
the tablet switch status changes.
On an ACPI based convertible chromebook check evtest display tablet mode
switch changes:
Available devices:
..
/dev/input/event3: Tablet Mode Switch
..
Testing ... (interrupt to exit)
Event: time 1484879712.604360, type 5 (EV_SW), code 1 (SW_TABLET_MODE),
value 1
Event: time 1484879712.604360, -------------- SYN_REPORT ------------
Event: time 1484879715.132228, type 5 (EV_SW), code 1 (SW_TABLET_MODE),
value 0
Event: time 1484879715.132228, -------------- SYN_REPORT ------------
...
Check state is updated at resume time when different from suspend time.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Commit 001dde9400 ("mfd: cros ec: spi: Fix "in progress" error
signaling") pointed out some bad code, but its analysis and conclusion
was not 100% correct.
It *is* correct that we should not propagate result==EC_RES_IN_PROGRESS
for transport errors, because this has a special meaning -- that we
should follow up with EC_CMD_GET_COMMS_STATUS until the EC is no longer
busy. This is definitely the wrong thing for many commands, because
among other problems, EC_CMD_GET_COMMS_STATUS doesn't actually retrieve
any RX data from the EC, so commands that expected some data back will
instead start processing junk.
For such commands, the right answer is to either propagate the error
(and return that error to the caller) or resend the original command
(*not* EC_CMD_GET_COMMS_STATUS).
Unfortunately, commit 001dde9400 forgets a crucial point: that for
some long-running operations, the EC physically cannot respond to
commands any more. For example, with EC_CMD_FLASH_ERASE, the EC may be
re-flashing its own code regions, so it can't respond to SPI interrupts.
Instead, the EC prepares us ahead of time for being busy for a "long"
time, and fills its hardware buffer with EC_SPI_PAST_END. Thus, we
expect to see several "transport" errors (or, messages filled with
EC_SPI_PAST_END). So we should really translate that to a retryable
error (-EAGAIN) and continue sending EC_CMD_GET_COMMS_STATUS until we
get a ready status.
IOW, it is actually important to treat some of these "junk" values as
retryable errors.
Together with commit 001dde9400, this resolves bugs like the
following:
1. EC_CMD_FLASH_ERASE now works again (with commit 001dde9400, we
would abort the first time we saw EC_SPI_PAST_END)
2. Before commit 001dde9400, transport errors (e.g.,
EC_SPI_RX_BAD_DATA) seen in other commands (e.g.,
EC_CMD_RTC_GET_VALUE) used to yield junk data in the RX buffer; they
will now yield -EAGAIN return values, and tools like 'hwclock' will
simply fail instead of retrieving and re-programming undefined time
values
Fixes: 001dde9400 ("mfd: cros ec: spi: Fix "in progress" error signaling")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Older models of Chromebooks did not describe the LPC EC in their ACPI
tables; starting with Strago-based devices Google is using GOOG0004 device
to describe EC LPC.
DMI-based match is fragile and does not work reliably, especially when
using custom firmware. It is also not needed when we can locate the right
ACPI device, so let's stop bailing out when DMI does not match but the
right ACPI device is present.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Fn + left arrow hotkey combination is used for enabling/disabling automatic
display brightness based on integrated ALS sensor. For this purpose there
is standard Linux key KEY_BRIGHTNESS_AUTO so use it instead of KEY_UNKNOWN.
Tested on Dell Lattitude E6500.
Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com>
Reviewed-By: Pali Rohár <pali.rohar@gmail.com>
Reviewed-By: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Now that we have informed the firmware that the Power Button driver is active,
laptops such as the Acer Swift 3 will generate a WMI key event with code 0x87
when the power button key is pressed.
Add this keycode to the table so that it is converted to
an appropriate input event.
Signed-off-by: Antonio Rosario Intilisano <antonio.intilisano@gmail.com>
Acked-by: Gianfranco Costamagna <locutusofborg@debian.org>
Tested-by: Antonio Rosario Intilisano <antonio.intilisano@gmail.com>
Cc: Chris Chiu <chiu@endlessm.com>
Cc: Daniel Drake <drake@endlessm.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Some of latest Lenovo ideapad laptops do not have UEFI/BIOS setting for
switching fn-lock mode. This commit adds related acpi calls to ideapad
platform driver. However setting is available via sysfs.
Signed-off-by: Oleg Keri <ezhi99@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Yet another Lenovo model to be added to the no_hw_rfkill blacklist:
ideapad MIIX 720-12IKB. Otherwise it's always hard-blocked.
Reported-by: Robin Roevens <robin.roevens1@pandora.be>
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1093035
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
If DELL_WMI "select"s DELL_SMBIOS, the DELL_SMBIOS dependencies are
ignored and it is still possible to end up with unmet direct
dependencies.
Change the select to a depends on.
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
If DELL_WMI "select"s DELL_SMBIOS, the DELL_SMBIOS dependencies are
ignored and it is still possible to end up with unmet direct
dependencies.
Change the select to a depends on.
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Add missing description of dev, regmap, dwork_irq, after_probe in struct
mlxreg_hotplug_priv_data.
Remove dwork field from the structure mlxreg_hotplug_priv_data itself and
for the descriptions, since it is not used.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Do not consider unknown HKEY events in the 0x6000 range to be thermal
warnings. Instead, handle them as a generic unknown HKEY event, which
are reported to the kernel log at priority "notice", and do not trigger
a thermal registers state dump to the log.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We should not do a thermal sensors state dump to the kernel log just
because the laptop is reporting that it changed into or out of tablet
mode.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Demote to debug level one existing thermal-control related event, and
also add two new ones that would otherwise trigger unknown event
warnings. These events are Windows-only for now.
We do report them to userspace in case they become useful in the future.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
As reported by Randy Dunlap:
>> WARNING: unmet direct dependencies detected for DELL_SMBIOS
>> Depends on [m]: X86 [=y] && X86_PLATFORM_DEVICES [=y]
>> && (DCDBAS [=m] ||
>> DCDBAS [=m]=n) && (ACPI_WMI [=n] || ACPI_WMI [=n]=n)
>> Selected by [y]:
>> - DELL_LAPTOP [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y]
>> && DMI [=y]
>> && BACKLIGHT_CLASS_DEVICE [=y] && (ACPI_VIDEO [=n] ||
>> ACPI_VIDEO [=n]=n)
>> && (RFKILL [=n] || RFKILL [=n]=n) && SERIO_I8042 [=y]
>>
Right now it's possible to set dell laptop to compile in but this
causes dell-smbios to compile in which breaks if dcdbas is a module.
Dell laptop shouldn't select dell-smbios anymore, but depend on it.
Fixes: 32d7b19bad (platform/x86: dell-smbios: Resolve dependency error on DCDBAS)
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
The method struct vga_switcheroo_handler::get_client_id() is defined
as returning an 'enum vga_switcheroo_client_id' but the implementation
in this driver, gmux_get_client_id(), returns an 'int'.
Fix this by returning 'enum vga_switcheroo_client_id' in this driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
As reported by Randy Dunlap:
>> WARNING: unmet direct dependencies detected for DELL_SMBIOS
>> Depends on [m]: X86 [=y] && X86_PLATFORM_DEVICES [=y]
>> && (DCDBAS [=m] ||
>> DCDBAS [=m]=n) && (ACPI_WMI [=n] || ACPI_WMI [=n]=n)
>> Selected by [y]:
>> - DELL_LAPTOP [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y]
>> && DMI [=y]
>> && BACKLIGHT_CLASS_DEVICE [=y] && (ACPI_VIDEO [=n] ||
>> ACPI_VIDEO [=n]=n)
>> && (RFKILL [=n] || RFKILL [=n]=n) && SERIO_I8042 [=y]
>>
Right now it's possible to set dell laptop to compile in but this
causes dell-smbios to compile in which breaks if dcdbas is a module.
Dell laptop shouldn't select dell-smbios anymore, but depend on it.
Fixes: 32d7b19bad (platform/x86: dell-smbios: Resolve dependency error on DCDBAS)
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Sergey reported that some much older Dell systems don't support
the OEM string "Dell System" but instead supported www.dell.com
in OEM strings.
Match both of these to indicate that this driver is running on
a Dell system.
Reported-by: Sergey Kubushyn <ksi@koi8.net>
Tested-by: Sergey Kubushyn <ksi@koi8.net>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
[dvhart: Simplify DMI logic and eliminate unnecessary variables]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
intel_scu_ipc_i2c_cntrl() calls mutex_lock(), which indicates
this function is not called in atomic context.
Despite never getting called from atomic context,
intel_scu_ipc_i2c_cntrl() calls mdelay to busily wait.
This is not necessary and can be replaced with usleep_range to
avoid busy waiting.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The hardcoded BIT(X) used in the soft key handling can be confusing and
prone to errors.
Instead, use the status FLAG_* defines for the sparse keymap index.
Rather than check for each known bit, use a bitmask to filter for all
known soft keys, and use the for_each_set_bit iterator.
Cc: Jan-Marek Glogowski <glogow@fbihome.de>
Cc: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Incorporates a series from Dmitry to remove platform data from
chromeos_laptop.c, which was the only user of platform data
for the atmel_mxt_ts driver.
Includes a series to clean up sysfs and debugfs for cros_ec.
Other misc. cleanups.
Thanks,
Benson
-----BEGIN PGP SIGNATURE-----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=mDkk
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform
Pull chrome platform updates from Benson Leung:
- a series from Dmitry to remove platform data from chromeos_laptop.c,
which was the only user of platform data for the atmel_mxt_ts driver.
- a series to clean up sysfs and debugfs for cros_ec
- other misc cleanups
* tag 'chrome-platform-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: (22 commits)
platform/chrome: mfd/cros_ec_dev: Add sysfs entry to set keyboard wake lid angle
platform/chrome: cros_ec_debugfs: Add PD port info to debugfs
platform/chrome: cros_ec_debugfs: Use octal permissions '0444'
platform/chrome: cros_ec_sysfs: use permission-specific DEVICE_ATTR variants
platform/chrome: cros_ec_sysfs: introduce to_cros_ec_dev define.
platform/chrome: cros_ec_sysfs: Modify error handling
platform/chrome: cros_ec_lpc: Add support for Google devices using custom coreboot firmware
platform/chrome: cros_ec_lpc: wake up from s2idle on Chrome EC
Input: atmel_mxt_ts - remove platform data support
platform/chrome: chromeos_laptop - discard data for unneeded boards
platform/chrome: chromeos_laptop - use device properties for Pixel
platform/chrome: chromeos_laptop - rely on I2C to set up interrupt trigger
platform/chrome: chromeos_laptop - use I2C notifier to create devices
platform/chrome: chromeos_laptop - parse DMI IRQ data once
platform/chrome: chromeos_laptop - rework i2c peripherals initialization
platform/chrome: chromeos_laptop - factor out getting IRQ from DMI
platform/chrome: chromeos_laptop - introduce pr_fmt()
platform/chrome: chromeos_laptop - stop setting suspend mode for Atmel devices
platform/chrome: chromeos_laptop - add SPDX identifier
Input: atmel_mxt_ts - switch ChromeOS ACPI devices to generic props
...
This adds a sysfs attribute (/sys/class/chromeos/cros_ec/kb_wake_angle)
used to set and get the keyboard wake lid angle. This attribute is
present only if 2 accelerometers are controlled by the EC.
This patch also moves the cros_ec features check before the device is
added so the features map obtained from the EC is ready on time.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Add info useful for debugging USB-PD port state.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Fixed the following checkpatch warning:
WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider
using octal permissions '0444'.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Use DEVICE_ATTR variants for read/write attributes. This simplifies the
source code, improves readbility, and reduces the chance of
inconsistencies.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Add a define to get the cros_ec_dev from device and use it.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
When accessing a sysfs attribute, if the EC command fails, -EPROTO is
now returned instead of an error message as it is unlikely an app is
parsing the error message to do something meaningful.
Also, this patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer() so an error message is printed in the syslog.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Dell SMBIOS driver fixed against memory leaks.
The fujitsu-laptop driver is cleaned up and now supports hotkeys for
Lifebook U7x7 models. Besides that the typo introduced by one of
previous clean up series has been fixed.
Specific to x86-based laptops HID device now supports
KEY_ROTATE_LOCK_TOGGLE event which is emitted, for example,
by Wacom MobileStudio Pro 13.
Turbo MAX 3 technology is enabled for the rest of platforms that support
Hardware-P-States feature which have core priority described by
ACPI CPPC table.
Mellanox on x86 gets better support of I2C bus in use including support
of hotpluggable ones.
Silead touchscreen is enabled on two tablet models, i.e Yours Y8W81 and
I.T.Works TW701.
From now on the second fan on Thinkpad P50 is supported.
The topstar-laptop driver is reworked to support new models, in
particular Topstar U931.
Some of the changes had been already applied during v4.16 cycle and thus
have a duplication here:
- 027d50ccd6 platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's
- 250b044e1a platform/x86: intel-vbtn: Reset wakeup capable flag on removal
- 356b57752c platform/x86: intel-hid: Reset wakeup capable flag on removal
- 501f7e52de platform/x86: wmi: Fix misuse of vsprintf extension %pULL
- 98c76a3904 platform/x86: dell-smbios: Correct some style warnings
- ec34fe3859 platform/x86: dell-smbios: Rename dell-smbios source to dell-smbios-bae
- 41e36f2f85 platform/x86: dell-smbios: Link all dell-smbios-* modules together
- c715e43455 platform/x86: Allow for SMBIOS backend defaults
- cc69c88fbe platform/x86: dell-smbios: Resolve dependency error on DCDBAS
- 4716007c23 platform/x86: dell-smbios: Resolve dependency error on ACPI_WMI
- 7129707ec2 platform/x86: Fix dell driver init order
The following is an automated git shortlog grouped by driver:
dell-smbios:
- Fix memory leaks in build_tokens_sysfs()
- Fix dell driver init order
- Resolve dependency error on ACPI_WMI
- Resolve dependency error on DCDBAS
- Allow for SMBIOS backend defaults
- Link all dell-smbios-* modules together
- Rename dell-smbios source to dell-smbios-base
- Correct some style warnings
fujitsu-laptop:
- Support Lifebook U7x7 hotkeys
- Revert UNSUPPORTED_CMD back to an int
- Clean up constants
- Define constants for backlight power control
- Do not include linux/slab.h
- Clearly distinguish module parameters
- Simplify error paths
- Defer input device registration
- Unify local variable naming
GPD pocket fan:
- fix spelling mistake: "Mill-celcius" -> "millicelsius"
intel-hid:
- support KEY_ROTATE_LOCK_TOGGLE
- clean up and sort header files
- Reset wakeup capable flag on removal
intel_turbo_max_3:
- Remove restriction for HWP platforms
intel-vbtn:
- Reset wakeup capable flag on removal
- Only activate tablet mode switch on 2-in-1's
mlx-platform:
- Add physical bus number auto detection
- Add deffered bus functionality
- Use define for the channel numbers
platform/mellanox:
- mlxreg-hotplug: Change input for device create routine
silead_dmi:
- Add entry for the Yours Y8W81 tablet
- Add DMI match for the I.T.Works TW701 tablet
thinkpad_acpi:
- Add 2nd Fan Support for Thinkpad P50
topstar-laptop:
- replace licence text with SPDX tag
- update copyright and fix some comments
- add Topstar U931/RVP7 WLAN LED workaround
- add platform device
- split ACPI events and input handling
- use consistent naming scheme
- revert "convert to module_acpi_driver()"
wmi:
- Fix misuse of vsprintf extension %pULL
- Replace list_for_each() by list_for_each_entry()
- Replace kmalloc + sprintf() with kasprintf()
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEhiZOUlnC9oKN3n3AmT3/83c5Sy0FAlrM6icACgkQmT3/83c5
Sy0qUA//Zg1uCmqTzvTxEsj7Z6RfwPV5IKE0pl86JufNXibuvxInVQI3qMU9D7lw
Fl6n0k0HDoOEce5wo8fy7pic1WmmwDrapaV977elMfv4yGNQl/eIEoT6g9VBGMhE
9ORrdjBJtVYJR2rWLNH0DzeU2WoLUL0OwTQs0e3mj/mLazIARN6lC0qPDr9P4baE
yXKkLGBmeuw2m0s3BfLVP5CDSanv0oB2IFsH5Qt1/y1qVT/VQnzcqFSSwz/IENm7
ZslNKR4Msi9/lDDt5HOsTADpgUI3m1t4fUReXx3MtcvuxZb6DdrHJWIAVU86NhKk
/Yxm6/HU5/zpYgLXF+980GVjT6/KfPtRjJFoBItFtNeatj/oI9YStcaPFWwt2TFV
hBHgS0OjPjuQNIizsjByitKerVEdsV7dJHY7wcmfq/3CpvB4Y8xrIJAa/Hj3HR34
SNbnl8vO1EfUu1vo1W4R8GfHxkIETKXT/hLpj54GSmSCzVY9lUQydyQwLTIC2Nsr
L8XPsZyZfS6mq4ZeGfy9QDFbLZ9NephjnGFBiRceWM8xZKO0l8iDYMfd2sVfOP+v
4SzoWmLMVXS+ittObRo8i26B7ISlzVwdf3XCQA2ZgYeP/E/1ilo44Ifwf7ycOgeu
Q8uk0mLAs0etfV8IqKwW3U5d/KzJEkBxYI4+HdL1IcQ2tAqe0J4=
=SuHR
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.17-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- Dell SMBIOS driver fixed against memory leaks.
- The fujitsu-laptop driver is cleaned up and now supports hotkeys for
Lifebook U7x7 models. Besides that the typo introduced by one of
previous clean up series has been fixed.
- Specific to x86-based laptops HID device now supports
KEY_ROTATE_LOCK_TOGGLE event which is emitted, for example, by Wacom
MobileStudio Pro 13.
- Turbo MAX 3 technology is enabled for the rest of platforms that
support Hardware-P-States feature which have core priority described
by ACPI CPPC table.
- Mellanox on x86 gets better support of I2C bus in use including
support of hotpluggable ones.
- Silead touchscreen is enabled on two tablet models, i.e Yours Y8W81
and I.T.Works TW701.
- From now on the second fan on Thinkpad P50 is supported.
- The topstar-laptop driver is reworked to support new models, in
particular Topstar U931.
* tag 'platform-drivers-x86-v4.17-1' of git://git.infradead.org/linux-platform-drivers-x86: (41 commits)
platform/x86: thinkpad_acpi: Add 2nd Fan Support for Thinkpad P50
platform/x86: dell-smbios: Fix memory leaks in build_tokens_sysfs()
intel-hid: support KEY_ROTATE_LOCK_TOGGLE
intel-hid: clean up and sort header files
platform/x86: silead_dmi: Add entry for the Yours Y8W81 tablet
platform/x86: fujitsu-laptop: Support Lifebook U7x7 hotkeys
platform/x86: mlx-platform: Add physical bus number auto detection
platform/mellanox: mlxreg-hotplug: Change input for device create routine
platform/x86: mlx-platform: Add deffered bus functionality
platform/x86: mlx-platform: Use define for the channel numbers
platform/x86: fujitsu-laptop: Revert UNSUPPORTED_CMD back to an int
platform/x86: Fix dell driver init order
platform/x86: dell-smbios: Resolve dependency error on ACPI_WMI
platform/x86: dell-smbios: Resolve dependency error on DCDBAS
platform/x86: Allow for SMBIOS backend defaults
platform/x86: dell-smbios: Link all dell-smbios-* modules together
platform/x86: dell-smbios: Rename dell-smbios source to dell-smbios-base
platform/x86: dell-smbios: Correct some style warnings
platform/x86: wmi: Fix misuse of vsprintf extension %pULL
platform/x86: intel-hid: Reset wakeup capable flag on removal
...
This patch adds generic device information to the DMI table of
the cros_ec_lpc driver, needed for Chromebooks/boxes using a
custom coreboot firmware.
The DMI info would not contain "Google_*" as BIOS version string,
instead the system vendor string would still be "GOOGLE", so this
seems to be a reasonable match for every Chromebook/box running
a custom firmware.
Signed-off-by: Salvatore Bellizzi <lkml@seppia.net>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Benson Leung <bleung@chromium.org>
Chrome platform installed a Chrome EC notify handler which prevents
default EC GPE handler getting called. Add pm_system_wakeup to the
Chrome EC notify handler so wake up from s2idle can happen.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Mark board data as __intconst/__initdata and make a copy of appropriate
entry once we identified the board we are running on. The rest of the data
will be discarded once the kernel finished booting (or module finished
loading).
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Now that Atmel driver uses generic device properties we can use them
instead of platform data when setting up touchpad on the original
Google Pixel.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Instead of passing interrupt flags via platform data to drivers, or
hoping that drivers will do the right thing and set it up the way we
need, let's set up IRQ resource and attach it to the I2C board info, and
let I2C core set it up for us.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Instead of using platform device and deferrals to handle the case when i2C
adapters appear late in the game, and not handling device unbinding all
that well, let's switch to using I2C bus notifier to get told when a new
I2C adapter appears in the system, and attempt to add appropriate devices
at that time.
In case when we have 2 Designware adapters in the system (Acer C720),
instead of counting and hoping they get enumerate din the right order,
let's switch to using their PCI devids (slot/function) that should be
stable.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Instead of trying to parse DMI IRQ data every time we try to instantiate a
device, let's do it once, when we identify the device we are working with.
This allows us to mark chromeos_laptop_get_irq_from_dmi() as __init and
discard it once module is initialized.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Instead of having separate setup() functions responsible for instantiating
i2c client for each peripheral, let's generalize the behavior and use
common code for instantiating all i2c peripherals.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
This will make code instantiating I2C device a bit clearer.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Replace the original license statement with the SPDX identifier.
Add also one line of description as recommended by the COPYING file.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Pull trivial tree updates from Jiri Kosina.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
kfifo: fix inaccurate comment
tools/thermal: tmon: fix for segfault
net: Spelling s/stucture/structure/
edd: don't spam log if no EDD information is present
Documentation: Fix early-microcode.txt references after file rename
tracing: Block comments should align the * on each line
treewide: Fix typos in printk
GenWQE: Fix a typo in two comments
treewide: Align function definition open/close braces
Here is the big set of USB and PHY driver patches for 4.17-rc1.
Lots of USB typeC work happened this round, with code moving from the
staging directory into the "real" part of the kernel, as well as new
infrastructure being added to be able to handle the different types of
"roles" that typeC requires.
There is also the normal huge set of USB gadget controller and driver
updates, along with XHCI changes, and a raft of other tiny fixes all
over the USB tree. And the PHY driver updates are merged in here as
well as they interacted with the USB drivers in some places.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWsSpJw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylGawCdED2xS3HUxOIqfh81d8B1py8ji04AoJXdLAsH
JgwXbdbibZBabYTVi5s5
=LrRH
-----END PGP SIGNATURE-----
Merge tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big set of USB and PHY driver patches for 4.17-rc1.
Lots of USB typeC work happened this round, with code moving from the
staging directory into the "real" part of the kernel, as well as new
infrastructure being added to be able to handle the different types of
"roles" that typeC requires.
There is also the normal huge set of USB gadget controller and driver
updates, along with XHCI changes, and a raft of other tiny fixes all
over the USB tree. And the PHY driver updates are merged in here as
well as they interacted with the USB drivers in some places.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (250 commits)
Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870"
usb: musb: gadget: misplaced out of bounds check
usb: chipidea: imx: Fix ULPI on imx53
usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag
usb: chipidea: usbmisc: small clean up
usb: chipidea: usbmisc: evdo can be set e/o reset
usb: chipidea: usbmisc: evdo is only specific to OTG port
USB: serial: ftdi_sio: add Id for Physik Instrumente E-870
usb: dwc3: gadget: never call ->complete() from ->ep_queue()
usb: gadget: udc: core: update usb_ep_queue() documentation
usb: host: Remove the deprecated ATH79 USB host config options
usb: roles: Fix return value check in intel_xhci_usb_probe()
USB: gadget: f_midi: fixing a possible double-free in f_midi
usb: core: Add USB_QUIRK_DELAY_CTRL_MSG to usbcore quirks
usb: core: Copy parameter string correctly and remove superfluous null check
USB: announce bcdDevice as well as idVendor, idProduct.
USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw
usb: hub: Reduce warning to notice on power loss
USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
USB: serial: cp210x: add ELDAT Easywave RX09 id
...
The Thinkpad P50 has 2 fans. Add the 2FAN quirk so the tpacpi driver
properly reports both fan speeds.
Because the P50 doesn't report the version of its EC controller,
we need to identify it by BIOS version (N1).
Signed-off-by: Alexander Kappner <agk@godking.net>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
[andy: renamed macro, massaged changelog]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We're freeing "value_name" which is NULL, so that's a no-op, but we
intended to free "location_name" instead. And then we don't free the
names in token_location_attrs[0] and token_value_attrs[0].
Fixes: 33b9ca1e53 ("platform/x86: dell-smbios: Add a sysfs interface for SMBIOS tokens")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
KEY_ROTATE_LOCK_TOGGLE is introduced in 4.16 rc1 and this key event is
emitted on Wacom MobileStudio Pro 13.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Co-developed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Removed unused header files and sorted them alphabetically. No
functional changes are made.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add an entry with touchscreen info for the Yours Y8W81 8" tablet.
This tablet has the same case and mostly the same internals as the Chuwi
Vi8. Both seem to be from an ODM called inet-tek. Both are labelled:
"INET-I86M-REVxx" on the PCB, with the Chuwi Vi8 being REV03 (and having
an ALC5640 audio codec) and the Yours Y8W81 being REV21 (and having an
ALC5651 audio codec). The wifi, accelerometer and touchscreen are
identical on both.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* acpi-battery:
Revert "ACPI: battery: Add the ThinkPad "Not Charging" quirk"
ACPI: battery: do not export degraded capacity values over 100
ACPI: battery: make function __battery_hook_unregister() static
ACPI: battery: Add the ThinkPad "Not Charging" quirk
thinkpad_acpi: Add support for battery thresholds
power: add to_power_supply macro to the API
battery: Add the battery hooking API
* acpi-doc:
ACPI: sysfs: Update device object sysfs documentation
* acpi-pmic:
ACPI / PMIC: Replace license boilerplate with SPDX license identifier
Some functions definitions have either the initial open brace and/or
the closing brace outside of column 1.
Move those braces to column 1.
This allows various function analyzers like gnu complexity to work
properly for these modified functions.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
mlx-platform does not provide a bus number to i2c-mlxcpld, assuming it
is always one. On some x86 systems, other i2c drivers may probe before
i2c-mlxcpld, causing bus one to be busy.
Make mlx-platform determine which adapter number is free prior to
activating i2c-mlxpld, adjusting the mux base numbers accordingly.
Update the mlxreg-hotplug pdata similarly.
This adds an explicit mlx-platform build dependency on I2C, update the
Kconfig accordingly. Add the missing REGMAP dependency while we're at
it.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
[dvhart: Rewrite commit message more concisely]
[dvhart: Add build dependencies]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Change the first input parameter in mlxreg_hotplug_device_create to the
pointer to mlxreg_hotplug private data in order to use the fields from
the private data structure.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
[dvhart: Cleaned up commit message]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
mlx-platform activates i2c-mux-reg, which creates buses needed by
mlxreg-hotplug. If the mlxreg-hotplug probe runs before the i2c-mux-reg
probe completes, it may attempt to connect a device to an adapter number
that has not been created yet, and fail.
Make mlx-platform driver record the highest bus number in mlxreg-hotplug
platform data and defer mlxreg-hotplug probe until all the buses are
created.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
[dvhart: rewrite commit message more concisely]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Add define for the channels number for mux device, instead of using
hardcoded value inside the code in order to improve code readability.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
We need to add device-connections for the Type-C mux/switch and usb-role
code to be able to find the PI3USB30532 Type-C cross-switch and the
device/host role-switch integrated in the CHT SoC.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UNSUPPORTED_CMD was previously 0x80000000 (int), but commit 819cddae7c
("platform/x86: fujitsu-laptop: Clean up constants") changed it into an
unsigned long due to BIT() being used to define it. As call_fext_func()
returns an int, 0x80000000 would get type promoted when compared to an
unsigned long, which on a 64-bit system would cause it to become
0xffffffff80000000 due to sign extension. This causes one logical
condition in fujitsu-laptop to always be true and another one to always
be false on 64-bit systems. Fix this by reverting UNSUPPORTED_CMD back
to an int.
This patch fixes the following smatch warnings:
drivers/platform/x86/fujitsu-laptop.c:763 acpi_fujitsu_laptop_leds_register() warn: always true condition '(call_fext_func(device, ((1 << (12)) | (1 << (0))), 2, (1 << (16)), 0) != (1 << (31))) => (s32min-s32max != 2147483648)'
drivers/platform/x86/fujitsu-laptop.c:816 acpi_fujitsu_laptop_add() warn: impossible condition '(priv->flags_supported == (1 << (31))) => (0-2147483647,18446744071562067968-u64max == 2147483648)'
Fixes: 819cddae7c ("platform/x86: fujitsu-laptop: Clean up constants")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
DELL_SMBIOS conditionally depends on ACPI_WMI in the same way it depends
on DCDBAS, update the Kconfig accordingly. Correct the driver init order
to ensure that the driver dependencies are met, avoiding race conditions
resulting in boot failure on certain systems when the drivers are
built-in.
The following is an automated git shortlog grouped by driver:
dell-smbios and related drivers:
- Fix dell driver init order
- Resolve dependency error on ACPI_WMI
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaqWWlAAoJEKbMaAwKp364y2gH/RUWyV2snZKLQNSzi9w5xdxb
G99n0Hsy5ugUcnqDx6jK7Hgy0Lm7D7Gs4+ePlY0AuPZN99ywTNfUQkr6Tbdns/wv
CKJtToA6DRh/fbvHDbNMsFEiv9a/Xdf21925K73KWqTN6RK/dWZVffafvRh0UmQe
ffGYccVNdxsOI4e8qNzk2++3QfxSsH97nDHDFDVA0lRWdKljK3DJTSzeUOhoRErf
YsyjUydVcnmlLmaoDt6xNAJIYcSqUqKwvIgX20hbeBYRBDLLZyjSpDjSW0F3NT2H
LZKq3hBoVzyp9ta3uZEwIZIdBk+5prR44ugFZZjOVsr7xvaMcKczerDPQEw9lgo=
=WjAI
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.16-7' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform drives fixes from Darren Hart:
- DELL_SMBIOS conditionally depends on ACPI_WMI in the same way it
depends on DCDBAS, update the Kconfig accordingly.
- fix the dell driver init order to ensure that the driver dependencies
are met, avoiding race conditions resulting in boot failure on
certain systems when the drivers are built-in.
* tag 'platform-drivers-x86-v4.16-7' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: Fix dell driver init order
platform/x86: dell-smbios: Resolve dependency error on ACPI_WMI
Update the initcall ordering to satisfy the following dependency
ordering:
1. DCDBAS, ACPI_WMI
2. DELL_SMBIOS, DELL_RBTN
3. DELL_LAPTOP, DELL_WMI
By assigning them to the following initcall levels:
subsys_initcall: DCDBAS, ACPI_WMI
module_init: DELL_SMBIOS, DELL_RBTN
late_initcall: DELL_LAPTOP, DELL_WMI
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Mario.Limonciello@dell.com
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Similarly to DCDBAS for DELL_SMBIOS_SMM, if DELL_SMBIOS_WMI is enabled,
DELL_SMBIOS becomes dependent on ACPI_WMI. Update the depends lines to
prevent a configuration where DELL_SMBIOS=y and either backend
dependency =m. Update the comment accordingly.
Cc: Mario Limonciello <mario.limonciello@dell.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Update the initcall ordering to satisfy the following dependency
ordering:
1. DCDBAS, ACPI_WMI
2. DELL_SMBIOS, DELL_RBTN
3. DELL_LAPTOP, DELL_WMI
By assigning them to the following initcall levels:
subsys_initcall: DCDBAS, ACPI_WMI
module_init: DELL_SMBIOS, DELL_RBTN
late_initcall: DELL_LAPTOP, DELL_WMI
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Mario.Limonciello@dell.com
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Similarly to DCDBAS for DELL_SMBIOS_SMM, if DELL_SMBIOS_WMI is enabled,
DELL_SMBIOS becomes dependent on ACPI_WMI. Update the depends lines to
prevent a configuration where DELL_SMBIOS=y and either backend
dependency =m. Update the comment accordingly.
Cc: Mario Limonciello <mario.limonciello@dell.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Correct a module loading race condition between the DELL_SMBIOS backend
modules and the first user by converting them to bool features of the
DELL_SMBIOS driver. Fixup the resulting Kconfig dependency issue with
DCDBAS.
The following is an automated git shortlog grouped by driver:
- Resolve dependency error on DCDBAS
- Allow for SMBIOS backend defaults
- Link all dell-smbios-* modules together
- Rename dell-smbios source to dell-smbios-base
- Correct some style warnings
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaot3AAAoJEKbMaAwKp364dmgIAIfHTsJK43WBdhiA8t+ZR2eI
vW6gWOmTR0srhybgBFh+yNd0ljH4Ogb/JUrFuF6cemtpWxTJC+KS0gZWbHFw/5w5
OsovY0/8AVtC7IFVe0HH3w3fZwsGGq4H/LU1K580cRF/YYzMVXnr2ASkIqn/EUzS
voeAuL23JYvq+ByAqqKmA3tN7/+YpMrt5MPkJHk/MGnGxspTapcMvEK/fkYSlDWa
MpWuKWqfFMM02sV37zyNQYaU64+5/FtGL/2OwsuMD6OgCism+FS/gPhR1JYLtPbd
GKJoSfWqn2cMnLTA+1V9ya0zvGAwK4AdIoe4Cjg49pITXZneNfw+NzoQUe12Yg4=
=FAX7
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.16-6' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Correct a module loading race condition between the DELL_SMBIOS
backend modules and the first user by converting them to bool features
of the DELL_SMBIOS driver. Fixup the resulting Kconfig dependency
issue with DCDBAS"
* tag 'platform-drivers-x86-v4.16-6' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: dell-smbios: Resolve dependency error on DCDBAS
platform/x86: Allow for SMBIOS backend defaults
platform/x86: dell-smbios: Link all dell-smbios-* modules together
platform/x86: dell-smbios: Rename dell-smbios source to dell-smbios-base
platform/x86: dell-smbios: Correct some style warnings
When the DELL_SMBIOS_SMM backend is enabled, the DELL_SMBIOS symbol
depends on DELL_DCDBAS, and we must avoid the situation where
DELL_SMBIOS=y and DCDBAS=m.
Adding the conditional dependency to DELL_SMBIOS such as:
depends !DELL_SMBIOS_SMM || (DCDBAS || DCDBAS=n)
results in the Kconfig tooling complaining about a circular dependency,
although it appears to work in practice.
Avoid the errors by simplifying the dependency and forcing DELL_SMBIOS
to be <= DCDBAS if DCDBAS is enabled (thanks to Greg KH for the
suggestion).
Cc: Mario.Limonciello@dell.com
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Avoid accidental configurations by setting default y for DELL_SMBIOS
backends. Avoid this impacting the default build size, by making them
dependent on DELL_SMBIOS, so they only appear when DELL_SMBIOS is
manually selected, or by DELL_LAPTOP or DELL_WMI.
While DELL_SMBIOS does have a prompt, it does not have any dependencies.
Keeping DELL_SMBIOS visible, despite being "select"ed by DELL_LAPTOP and
DELL_WMI, is a deliberate choice to provide context for the WMI and SMM
backends, which would otherwise appear to float without context within
the menu.
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Some race conditions were raised due to dell-smbios and its backends
not being ready by the time that a consumer would call one of the
exported methods.
To avoid this problem, guarantee that all initialization has been
done by linking them all together and running init for them all.
As part of this change the Kconfig needs to be adjusted so that
CONFIG_DELL_SMBIOS_SMM and CONFIG_DELL_SMBIOS_WMI are boolean
rather than modules.
CONFIG_DELL_SMBIOS is a visually selectable option again and both
CONFIG_DELL_SMBIOS_WMI and CONFIG_DELL_SMBIOS_SMM are optional.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
[dvhart: Update prompt and help text for DELL_SMBIOS_* backends]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
This is being done to faciliate a later change to link all the dell-smbios
drivers together.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
WARNING: function definition argument 'struct calling_interface_buffer *'
should also have an identifier name
+ int (*call_fn)(struct calling_interface_buffer *);
WARNING: Block comments use * on subsequent lines
+ /* 4 bytes of table header, plus 7 bytes of Dell header,
plus at least
+ 6 bytes of entry */
WARNING: Block comments use a trailing */ on a separate line
+ 6 bytes of entry */
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
When the DELL_SMBIOS_SMM backend is enabled, the DELL_SMBIOS symbol
depends on DELL_DCDBAS, and we must avoid the situation where
DELL_SMBIOS=y and DCDBAS=m.
Adding the conditional dependency to DELL_SMBIOS such as:
depends !DELL_SMBIOS_SMM || (DCDBAS || DCDBAS=n)
results in the Kconfig tooling complaining about a circular dependency,
although it appears to work in practice.
Avoid the errors by simplifying the dependency and forcing DELL_SMBIOS
to be <= DCDBAS if DCDBAS is enabled (thanks to Greg KH for the
suggestion).
Cc: Mario.Limonciello@dell.com
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
This reverts commit a376cd9160 because
chromeos_laptop instances should not be marked as "const" (at this
time), since i2c_peripheral is being modified (we change "state" and
"tries") when we instantiate devices.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Avoid accidental configurations by setting default y for DELL_SMBIOS
backends. Avoid this impacting the default build size, by making them
dependent on DELL_SMBIOS, so they only appear when DELL_SMBIOS is
manually selected, or by DELL_LAPTOP or DELL_WMI.
While DELL_SMBIOS does have a prompt, it does not have any dependencies.
Keeping DELL_SMBIOS visible, despite being "select"ed by DELL_LAPTOP and
DELL_WMI, is a deliberate choice to provide context for the WMI and SMM
backends, which would otherwise appear to float without context within
the menu.
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Some race conditions were raised due to dell-smbios and its backends
not being ready by the time that a consumer would call one of the
exported methods.
To avoid this problem, guarantee that all initialization has been
done by linking them all together and running init for them all.
As part of this change the Kconfig needs to be adjusted so that
CONFIG_DELL_SMBIOS_SMM and CONFIG_DELL_SMBIOS_WMI are boolean
rather than modules.
CONFIG_DELL_SMBIOS is a visually selectable option again and both
CONFIG_DELL_SMBIOS_WMI and CONFIG_DELL_SMBIOS_SMM are optional.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
[dvhart: Update prompt and help text for DELL_SMBIOS_* backends]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
This is being done to faciliate a later change to link all the dell-smbios
drivers together.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
WARNING: function definition argument 'struct calling_interface_buffer *'
should also have an identifier name
+ int (*call_fn)(struct calling_interface_buffer *);
WARNING: Block comments use * on subsequent lines
+ /* 4 bytes of table header, plus 7 bytes of Dell header,
plus at least
+ 6 bytes of entry */
WARNING: Block comments use a trailing */ on a separate line
+ 6 bytes of entry */
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
%pULL doesn't officially exist but %pUL does.
Miscellanea:
o Add missing newlines to a couple logging messages
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
%pULL doesn't officially exist but %pUL does.
Miscellanea:
o Add missing newlines to a couple logging messages
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
The intel-hid device will not be able to wake up the system any more
after removing the notify handler provided by its driver, so make
its sysfs attributes reflect that.
Fixes: ef884112e5 (platform: x86: intel-hid: Wake up the system from suspend-to-idle)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The intel-vbtn device will not be able to wake up the system any more
after removing the notify handler provided by its driver, so make
its sysfs attributes reflect that.
Fixes: 91f9e850d4 (platform: x86: intel-vbtn: Wake up the system from suspend-to-idle)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The intel-hid device will not be able to wake up the system any more
after removing the notify handler provided by its driver, so make
its sysfs attributes reflect that.
Fixes: ef884112e5 (platform: x86: intel-hid: Wake up the system from suspend-to-idle)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The intel-vbtn device will not be able to wake up the system any more
after removing the notify handler provided by its driver, so make
its sysfs attributes reflect that.
Fixes: 91f9e850d4 (platform: x86: intel-vbtn: Wake up the system from suspend-to-idle)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Some laptops such as the XPS 9360 support the intel-vbtn INT33D6
interface but don't initialize the bit that intel-vbtn uses to
represent switching tablet mode.
By running this only on real 2-in-1's it shouldn't cause false
positives.
Fixes: 30323fb6d5 ("Support tablet mode switch")
Reported-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Tested-by: Jeremy Cline <jeremy@jcline.org>
Tested-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Some laptops such as the XPS 9360 support the intel-vbtn INT33D6
interface but don't initialize the bit that intel-vbtn uses to
represent switching tablet mode.
By running this only on real 2-in-1's it shouldn't cause false
positives.
Fixes: 30323fb6d5 ("Support tablet mode switch")
Reported-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Tested-by: Jeremy Cline <jeremy@jcline.org>
Tested-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Align all constant values defined in the module to a common indentation.
Rename ACPI_FUJITSU_NOTIFY_CODE1 to ACPI_FUJITSU_NOTIFY_CODE as there is
only one ACPI notification code used throughout the driver. Define all
bitmasks using the BIT() macro. Clean up comments.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Use named constants instead of integers in call_fext_func() invocations
related to backlight power control in order to more clearly convey the
intent of each call.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Do not include linux/slab.h as all module code now uses managed memory
allocations and thus neither k*alloc() nor kfree() is used.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
In order to improve code clarity, move declarations of variables that
are module parameters higher up and add a comment.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Replace the last few lines of acpi_fujitsu_bl_add() with a simple return
in order to improve code readability without changing the logic.
As acpi_fujitsu_laptop_add() uses a managed memory allocation for
device-specific data, it is fine to just return immediately upon kfifo
allocation failure. Do that instead of jumping to the end of the
function to improve code readability. Running out of memory while
allocating the kfifo does not seem probable enough to warrant logging an
error message, so do not do it.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Only register input devices after the device-specific data structures
they access are fully initialized.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Different functions in the module use varying names (error, result,
status) for a local variable storing the return value of a function call
that has to be checked for errors. Use a common name (ret) for all
these local variables to improve code consistency. Merge integer
variable declarations in acpi_fujitsu_laptop_add() into one line.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
The I.T.Works TW701 7" tablet is a differently branded version of the
same generic 7" Windows tablet as the Trekstor ST70416-6. Add a DMI
match-table entry for it pointing to the Trekstor's touchscreen info.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add myself as an author of the driver.
Signed-off-by: Guillaume Douézan-Grard <gdouezangrard@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Topstar U931 laptops provide a LED synced with the WLAN adapter
hard-blocking state. Unfortunately, some models seem to be defective,
making impossible to hard-block the adapter with the WLAN switch and
thus the LED is useless.
An ACPI method is available to programmatically control this switch and
it indirectly allows to control the LED.
This commit registers the LED within the corresponding subsystem, making
possible for instance to use an rfkill-based trigger to synchronize the
LED with the device state.
This workaround is enabled automatically for Topstar U931/RVP7 laptops
based on a DMI check.
Signed-off-by: Guillaume Douézan-Grard <gdouezangrard@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* add a platform device to support further addition of a led subsystem,
* register the existing input device to this platform device.
Signed-off-by: Guillaume Douézan-Grard <gdouezangrard@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* get the `acpi_device` from the `topstar_laptop` struct,
* split input registering and `sparse_keymap` events from ACPI events
handling,
* use notify, init and exit functions for ACPI and input handling
Signed-off-by: Guillaume Douézan-Grard <gdouezangrard@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Revert commit
15165594da ("topstar-laptop: convert to module_acpi_driver()")
to later add a platform device.
Signed-off-by: Guillaume Douézan-Grard <gdouezangrard@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In all cases list_for_each() followed by list_entry(),
so, replace them by list_for_each_entry() macro.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
1) Charge start threshold
/sys/class/power_supply/BATN/charge_start_threshold
Valid values are [0, 99]. A value of 0 turns off the
start threshold wear control.
2) Charge stop threshold
/sys/class/power_supply/BATN/charge_stop_threshold
Valid values are [1, 100]. A value of 100 turns off
the stop threshold wear control. This must be
configured first.
Signed-off-by: Ognjen Galic <smclt30p@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
kasprintf() does the job of two: kmalloc() and sprintf().
Replace two calls with one.
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
On systems supporting HWP (Hardware P-States) mode, we expected to
enumerate core priority via ACPI-CPPC tables. Unfortunately deployment of
TURBO 3.0 didn't use this method to show core priority. So users are not
able to utilize this feature in HWP mode.
So remove the loading restriction of this driver for HWP enabled systems.
Even if there are some systems, which are providing the core priority via
ACPI CPPC, this shouldn't cause any conflict as the source of priority
definition is same.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reported-and-tested-and-reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Trivial fix to spelling mistake in MODULE_PARM_DESC text and remove
unnecessary hyphen.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
