Those are the only routines using the perf_event__handler_t typedef and
are all related, so move to a separate header to reduce the header
dependency tree, lots of places were getting event.h and even stdio.h,
limits.h indirectly, so fix those as well.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-yvx9u1mf7baq6cu1abfhbqgs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can reduce the header dependency tree further, in the process
noticed that lots of places were getting even things like build-id
routines and 'struct perf_tool' definition indirectly, so fix all those
too.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ti0btma9ow5ndrytyoqdk62j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And into a separate util/record.h, to better isolate things and make
sure that those who use record_opts and the other moved declarations
are explicitly including the necessary header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-31q8mei1qkh74qvkl9nwidfq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get closer to upstream and check if we need to sync more UAPI
headers, pick up fixes for libbpf that prevent perf's container tests
from completing successfuly, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390 the modules loaded in memory have the text segment located after
the GOT and Relocation table. This can be seen with this output:
[root@m35lp76 perf]# fgrep qeth /proc/modules
qeth 151552 1 qeth_l2, Live 0x000003ff800b2000
...
[root@m35lp76 perf]# cat /sys/module/qeth/sections/.text
0x000003ff800b3990
[root@m35lp76 perf]#
There is an offset of 0x1990 bytes. The size of the qeth module is
151552 bytes (0x25000 in hex).
The location of the GOT/relocation table at the beginning of a module is
unique to s390.
commit 203d8a4aa6 ("perf s390: Fix 'start' address of module's map")
adjusts the start address of a module in the map structures, but does
not adjust the size of the modules. This leads to overlapping of module
maps as this example shows:
[root@m35lp76 perf] # ./perf report -D
0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x25000)
@ 0]: x /lib/modules/.../qeth.ko.xz
0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x8000)
@ 0]: x /lib/modules/.../ip6_tables.ko.xz
The module qeth.ko has an adjusted start address modified to b3990, but
its size is unchanged and the module ends at 0x3ff800d8990. This end
address overlaps with the next modules start address of 0x3ff800d85a0.
When the size of the leading GOT/Relocation table stored in the
beginning of the text segment (0x1990 bytes) is subtracted from module
qeth end address, there are no overlaps anymore:
0x3ff800d8990 - 0x1990 = 0x0x3ff800d7000
which is the same as
0x3ff800b2000 + 0x25000 = 0x0x3ff800d7000.
To fix this issue, also adjust the modules size in function
arch__fix_module_text_start(). Add another function parameter named size
and reduce the size of the module when the text segment start address is
changed.
Output after:
0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x23670)
@ 0]: x /lib/modules/.../qeth.ko.xz
0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x7a60)
@ 0]: x /lib/modules/.../ip6_tables.ko.xz
Reported-by: Stefan Liebler <stli@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 203d8a4aa6 ("perf s390: Fix 'start' address of module's map")
Link: http://lkml.kernel.org/r/20190724122703.3996-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct thread_map to struct perf_thread_map, so it could be part
of libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And since machine.h only needs what is in there, make it stop including
map.h and instead include this newly introduced map_groups.h instead.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-dbob25fv5rp2rjpwlnterf38@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At the cost of an extra pointer, we can avoid the O(logN) cost of
finding the first element in the tree (smallest node), which is
something required for nearly every operation dealing with
machine->guests and threads->entries.
The conversion is straightforward, however, it's worth noticing that the
rb_erase_init() calls have been replaced by rb_erase_cached() which has
no _init() flavor, however, the node is explicitly cleared next anyway,
which was redundant until now.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181206191819.30182-3-dave@stgolabs.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch handles PERF_RECORD_KSYMBOL in perf record/report.
Specifically, map and symbol are created for ksymbol register, and
removed for ksymbol unregister.
This patch also sets perf_event_attr.ksymbol properly. The flag is ON by
default.
Committer notes:
Use proper inttypes.h for u64, fixing the build in some environments
like in the android NDK r15c targetting ARM 32-bit.
I.e. fixing this build error:
util/event.c: In function 'perf_event__fprintf_ksymbol':
util/event.c:1489:10: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'u64' [-Werror=format=]
event->ksymbol_event.flags, event->ksymbol_event.name);
^
cc1: all warnings being treated as errors
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20190117161521.1341602-6-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The default timeout of 500ms for parsing /proc/<pid>/maps files is too
short for profiling many of our services.
This can be overridden by passing --proc-map-timeout to the relevant
command but it'd be nice to globally increase our default value.
This patch permits setting a different default with the
core.proc-map-timeout config file parameter.
Signed-off-by: Mark Drayton <mbd@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181204203420.1683114-1-mbd@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For branch stacks or branch samples, the sample cpumode might not be
correct because it applies only to the sample 'ip' and not necessary to
'addr' or branch stack addresses. Add fallback functions that can be
used to deal with those cases
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org # 4.19
Link: http://lkml.kernel.org/r/20181106210712.12098-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some architectures have a single address space for kernel and user
addresses, which makes it possible to determine if an address is in
kernel space or user space. Some don't, e.g.: sparc.
Cache that info in perf_env so that, for instance, code needing to
fallback failed symbol lookups at the kernel space in single address
space arches can lookup at userspace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org # 4.19
Link: http://lkml.kernel.org/r/20181106210712.12098-2-adrian.hunter@intel.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_set_file_bigendian, pevent_set_flag,
pevent_set_function_resolver, pevent_set_host_bigendian,
pevent_set_long_size, pevent_set_page_size and pevent_get_long_size
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180701.256265951@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create maps for x86 PTI entry trampolines, based on symbols found in
kallsyms. It is also necessary to keep track of whether the trampolines
have been mapped particularly when the kernel dso is kcore.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-9-git-send-email-adrian.hunter@intel.com
[ Fix extra_kernel_map_info.cnt designed struct initializer on gcc 4.4.7 (centos:6, etc) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On x86_64 the PTI entry trampolines are not in the kernel map created by
perf tools. That results in the addresses having no symbols and prevents
annotation. It also causes Intel PT to have decoding errors at the
trampoline addresses.
Workaround that by creating maps for the trampolines.
At present the kernel does not export information revealing where the
trampolines are. Until that happens, the addresses are hardcoded.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to return the number of the machine's available CPUs.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to identify the machine architecture.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526548928-20790-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we do not have split symtabs anymore, no need to have explicit
find_kernel_function variants, use the find_kernel_symbol ones.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hiw2ryflju000f6wl62128it@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the split of symbol tables for data (MAP__VARIABLE) and for
functions (MAP__FUNCTION), its unneeded and there were various places
doing two lookups to find a symbol, so simplify this.
We still will consider only the symbols that matched the filters in
place, i.e. see the (elf_(sec,sym)|symbol_type)__filter() routines in
the patch, just so that we consider only the same symbols as before,
to reduce the possibility of regressions.
All the tests on 50-something build environments, in varios versions
of lots of distros and cross build environments were performed without
build regressions, as usual with all pull requests the other tests were
also performed: 'perf test' and 'make -C tools/perf build-test'.
Also this was done at a great granularity so that regressions can be
bisected more easily.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hiq0fy2rsleupnqqwuojo1ne@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since it uses machine__kernel_map() and this function always returns the
MAP__FUNCTION map, it doesn't make sense to call it with MAP__VARIABLE.
And also this is a step in the direction of nuking the MAP__{FUNCTION,VARIABLE}
split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-0h3eof3kx3kq32ixg5fquf3p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So far the only use is for MAP__FUNCTION, and since we're going to
remove that split, remove the map_type argument in machine__load_kallsyms().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5dhgh7x8g9hx5hpxlp3k08jp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That returns the a data structure contained the ordered list of kernel
modules + the main kernel maps, one more step in removing the
MAP__{FUNCTION,VARIABLE} split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-qsgbxfyaohc80c9ma049dubm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current machine__load_kallsyms() function has no caller, so replace
it directly with __machine__load_kallsyms(). Also remove the no_kcore
argument as it was always called with a 'true' value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We should not search for the kernel start address in
__machine__create_kernel_maps(), because it's being used in the 'report'
code path, where we are interested in kernel MMAP data address (the one
recorded via 'perf record', possibly on another machine, or an older or
newer kernel on the same machine where analysis is being performed)
instead of in current kernel address.
The __machine__create_kernel_maps() function serves purely for creating
the machines kernel maps and setting up the kmap group. The report code
path then sets the address based on the data from kernel MMAP event in
the machine__set_kernel_mmap() function.
The kallsyms search address logic is used for test code, that calls
machine__create_kernel_maps() to get current maps and calls
machine__get_running_kernel_start() to get kernel starting address.
Use machine__set_kernel_mmap() to set the kernel maps start address and
moving map_groups__fixup_end to be call when all maps are in place.
Also make __machine__create_kernel_maps static, because there's no
external user.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It simplifies and centralizes the code. The kernel mmap name is set for
machine type, which we know from the beginning, so there's no reason to
generate it every time we need it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The proc files which is sorted with alphabetical order are evenly
assigned to several synthesize threads to be processed in parallel.
For 'perf top', the threads number hard code to online CPU number. The
following patch will introduce an option to set it.
For other perf tools, the thread number is 1. Because the process
function is not ready for multithreading, e.g.
process_synthesized_event.
This patch series only support event synthesize multithreading for 'perf
top'. For other tools, it can be done separately later.
With multithread applied, the total processing time can get up to 1.56x
speedup on Knights Mill for 'perf top'.
For specific single event processing, the processing time could increase
because of the lock contention. So proc_map_timeout may need to be
increased. Otherwise some proc maps will be truncated.
Based on my test, increasing the proc_map_timeout has small impact
on the total processing time. The total processing time still get 1.49x
speedup on Knights Mill after increasing the proc_map_timeout.
The patch itself doesn't increase the proc_map_timeout.
Doesn't need to implement multithreading for per task monitoring,
perf_event__synthesize_thread_map. It doesn't have performance issue.
Committer testing:
# getconf _NPROCESSORS_ONLN
4
# perf trace --no-inherit -e clone -o /tmp/output perf top
# tail -4 /tmp/bla
0.124 ( 0.041 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3eb3a8f30, parent_tidptr: 0x7fc3eb3a99d0, child_tidptr: 0x7fc3eb3a99d0, tls: 0x7fc3eb3a9700) = 9548 (perf)
0.246 ( 0.023 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3eaba7f30, parent_tidptr: 0x7fc3eaba89d0, child_tidptr: 0x7fc3eaba89d0, tls: 0x7fc3eaba8700) = 9549 (perf)
0.286 ( 0.019 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3ea3a6f30, parent_tidptr: 0x7fc3ea3a79d0, child_tidptr: 0x7fc3ea3a79d0, tls: 0x7fc3ea3a7700) = 9550 (perf)
246.540 ( 0.047 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3ea3a6f30, parent_tidptr: 0x7fc3ea3a79d0, child_tidptr: 0x7fc3ea3a79d0, tls: 0x7fc3ea3a7700) = 9551 (perf)
#
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1506696477-146932-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi reported a performance drop in single threaded perf tools such as
'perf script' due to the growing number of locks being put in place to
allow for multithreaded tools, so wrap the POSIX threads rwlock routines
with the names used for such kinds of locks in the Linux kernel and then
allow for tools to ask for those locks to be used or not.
I.e. a tool may have a multithreaded phase and then switch to single
threaded, like the upcoming patches for the synthesizing of
PERF_RECORD_{FORK,MMAP,etc} for pre-existing processes to then switch to
single threaded mode in 'perf top'.
The init routines will not be conditional, this way starting as single
threaded to then move to multi threaded mode should be possible.
Reported-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170404161739.GH12903@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To process any events, it needs to find the thread in the machine first.
The machine maintains a rb tree to store all threads. The rb tree is
protected by a rw lock.
It is not a problem for current perf which serially processing events.
However, it will have scalability performance issue to process events in
parallel, especially on a heavy load system which have many threads.
Introduce a hashtable to divide the big rb tree into many samll rb tree
for threads. The index is thread id % hashtable size. It can reduce the
lock contention.
Committer notes:
Renamed some variables and function names to reduce semantic confusion:
'struct threads' pointers: thread -> threads
threads hastable index: tid -> hash_bucket
struct threads *machine__thread() -> machine__threads()
Cast tid to (unsigned int) to handle -1 in machine__threads() (Kan Liang)
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1505096603-215017-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new option to record PERF_RECORD_NAMESPACES events emitted
by the kernel when fork, clone, setns or unshare are invoked. And update
perf-record documentation with the new option to record namespace
events.
Committer notes:
Combined it with a later patch to allow printing it via 'perf report -D'
and be able to test the feature introduced in this patch. Had to move
here also perf_ns__name(), that was introduced in another later patch.
Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt:
util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=]
ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx
^
Testing it:
# perf record --namespaces -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ]
#
# perf report -D
<SNIP>
3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
0x1151e0 [0x30]: event: 9
.
. ... raw event: size 48 bytes
. 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h....
. 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c....
. 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................
<SNIP>
NAMESPACES events: 1
<SNIP>
#
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the boilerplate for searching for functions in the running
kernel and modules.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-93iqzayafpaxaguoiwjqezgz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're not using it anymore, few users were, but we really could do
without it, simplify lots of functions by removing it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1zng8wdznn00iiz08bb7q3vn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Including machines__set_symbol_filter(), not used anymore.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7o1qgmrpvzuis4a9f0t8mnri@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At present, when creating module's map, perf gets 'start' address by
parsing '/proc/modules', but it's the module base address, it isn't the
start address of the '.text' section.
In most arches, it's OK. But for s390, it places 'GOT' and 'PLT'
relocations before '.text' section. So there exists an offset between
module base address and '.text' section, which will incur wrong symbol
resolution for modules.
Fix this bug by getting 'start' address of module's map from parsing
'/sys/module/[module name]/sections/.text', not from '/proc/modules'.
Signed-off-by: Song Shan Gong <gongss@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1469070651-6447-2-git-send-email-gongss@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Hook into the libtraceevent plugin kernel symbol resolver to warn the
user that that can't happen with kptr_restrict=1.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-9gc412xx1gl0lvqj1d1xwlyb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To be used, for instance, for pre-allocating an rb_tree array for
sorting by other keys besides the current pid one.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ja0ifkwue7ttjhbwijn6g6eu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before the support for using /proc/kcore was introduced, the kallsyms
routines used /proc/modules and the first 'perf test' entry expected
finding maps for each module in the system, which is not the case with
the kcore code. Provide a way to ignore kcore files so that the test can
have its expectations met.
Improving the test to cover kcore files as well needs to be done.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ek5urnu103dlhfk4l6pcw041@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The recent perf_evsel__fprintf_callchain() move to evsel.c added several
new symbol requirements to the python binding, for instance:
# perf test -v python
16: Try 'import perf' in python, checking link problems :
--- start ---
test child forked, pid 18030
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /tmp/build/perf/python/perf.so: undefined symbol:
callchain_cursor
test child finished with -1
---- end ----
Try 'import perf' in python, checking link problems: FAILED!
#
This would require linking against callchain.c to access to the global
callchain_cursor variables.
Since lots of functions already receive as a parameter a
callchain_cursor struct pointer, make that be the case for some more
function so that we can start phasing out usage of yet another global
variable.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-djko3097eyg2rn66v2qcqfvn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All over the tree.
Cc: David Ahern <dsahern@gmail.com>
cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-8nzhnokxyp8y4v7gf0j00oyb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To be used in the 'vmlinux matches kallsyms' 'perf test' entry.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-m56g1853lz2c6nhnqxibq4jd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And it is also a step in the direction of killing the separation of data
and text maps in map_groups.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rrds86kb3wx5wk8v38v56gw8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'struct machine' represents the machine where the samples were/are
being collected, and we also have a 'struct perf_env' with extra details
about such machine, that we were collecting at 'perf.data' creation time
but we also needed when no perf.data file is being used, such as in
'perf top'.
So, get those structs closer together, as they provide a bigger picture
of the sample's environment.
In 'perf session', when the file argument is NULL, we can assume that
the tool is sampling the running machine, so point machine->env to
the global put in place in previous patches, while set it to the
perf_header.env one when reading from a file.
This paves the way for machine->env to be used in
perf_event__preprocess_sample to populate addr_location.socket.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2ajotl0khscutm68exictoy9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support processing of PERF_RECORD_SWITCH events and
PERF_RECORD_SWITCH_CPU_WIDE events. There is a single
tools callback for them both so that the tool must
check the event type before using the extra members
in PERF_RECORD_SWITCH_CPU_WIDE.
There is still no way to select the events, though.
That is added in a subsequest patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1437471846-26995-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That provides the function signature expected by libtraceevent's
pevent_set_function_resolver().
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-ie6hvlb6u15y4ulg9j1612zg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The time out to limit the individual proc map processing was hard code
to 500ms. This patch introduce a new option --proc-map-timeout to make
the time limit configurable.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ying Huang <ying.huang@intel.com>
Link: http://lkml.kernel.org/r/1434549071-25611-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The thread-stack represents a thread's current stack. When a thread
exits there can still be many functions on the stack e.g. exit() can be
called many levels deep, so all the callers will never return. To get
that information output, the thread-stack must be flushed.
Previously it was assumed the thread-stack would be flushed when the
struct thread was deleted. With thread ref-counting it is no longer
clear when that will be, if ever. So instead explicitly flush all the
thread-stacks at the end of a session.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1432906425-9911-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Calling the function 'machine__new_module' implies a new 'module' will
be allocated, when in fact what is returned is a 'struct map' instance,
that not necessarily will be instantiated, as if one already exists with
the given module name, it will be returned instead.
So be consistent with other "find and if not there, create" like
functions, like machine__findnew_thread, machine__findnew_dso, etc, and
rename it to machine__findnew_module_map(), that in turn will call
machine__findnew_module_dso().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-acv830vd3hwww2ih5vjtbmu3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch modifies the perf tool to handle the new RECORD type,
PERF_RECORD_LOST_SAMPLES.
The number of lost-sample events is stored in
.nr_events[PERF_RECORD_LOST_SAMPLES]. The exact number of samples
which the kernel dropped is stored in total_lost_samples.
When the percentage of dropped samples is greater than 5%, a warning
is printed.
Here are some examples:
Eg 1, Recording different frequently-occurring events is safe with the
patch. Only a very low drop rate is associated with such actions.
$ perf record -e '{cycles:p,instructions:p}' -c 20003 --no-time ~/tchain ~/tchain
$ perf report -D | tail
SAMPLE events: 120243
MMAP2 events: 5
LOST_SAMPLES events: 24
FINISHED_ROUND events: 15
cycles:p stats:
TOTAL events: 59348
SAMPLE events: 59348
instructions:p stats:
TOTAL events: 60895
SAMPLE events: 60895
$ perf report --stdio --group
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 24
#
# Samples: 120K of event 'anon group { cycles:p, instructions:p }'
# Event count (approx.): 24048600000
#
# Overhead Command Shared Object Symbol
# ................ ........... ................
..................................
#
99.74% 99.86% tchain_edit tchain_edit [.] f3
0.09% 0.02% tchain_edit tchain_edit [.] f2
0.04% 0.00% tchain_edit [kernel.vmlinux] [k] ixgbe_read_reg
Eg 2, Recording the same thing multiple times can lead to high drop
rate, but it is not a useful configuration.
$ perf record -e '{cycles:p,cycles:p}' -c 20003 --no-time ~/tchain
Warning: Processed 600592 samples and lost 99.73% samples!
[perf record: Woken up 148 times to write data]
[perf record: Captured and wrote 36.922 MB perf.data (1206322 samples)]
[perf record: Woken up 1 times to write data]
[perf record: Captured and wrote 0.121 MB perf.data (1629 samples)]
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1431285195-14269-9-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
