Steffen Klassert says:
====================
pull request (net): ipsec 2020-12-07
1) Sysbot reported fixes for the new 64/32 bit compat layer.
From Dmitry Safonov.
2) Fix a memory leak in xfrm_user_policy that was introduced
by adding the 64/32 bit compat layer. From Yu Kuai.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
net: xfrm: fix memory leak in xfrm_user_policy()
xfrm/compat: Don't allocate memory with __GFP_ZERO
xfrm/compat: memset(0) 64-bit padding at right place
xfrm/compat: Translate by copying XFRMA_UNSPEC attribute
====================
Link: https://lore.kernel.org/r/20201207093937.2874932-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When do cat /proc/net/netstat, the output isn't append with a new line, it looks like this:
[root@localhost ~]# cat /proc/net/netstat
...
MPTcpExt: 0 0 0 0 0 0 0 0 0 0 0 0 0[root@localhost ~]#
This is because in mptcp_seq_show(), if mptcp isn't in use, net->mib.mptcp_statistics is NULL,
so it just puts all 0 after "MPTcpExt:", and return, forgot the '\n'.
After this patch:
[root@localhost ~]# cat /proc/net/netstat
...
MPTcpExt: 0 0 0 0 0 0 0 0 0 0 0 0 0
[root@localhost ~]#
Fixes: fc518953bc ("mptcp: add and use MIB counter infrastructure")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Acked-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/142e2fd9-58d9-bb13-fb75-951cccc2331e@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When enabling multicast snooping, bridge module deadlocks on multicast_lock
if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2
network.
The deadlock was caused by the following sequence: While holding the lock,
br_multicast_open calls br_multicast_join_snoopers, which eventually causes
IP stack to (attempt to) send out a Listener Report (in igmp6_join_group).
Since the destination Ethernet address is a multicast address, br_dev_xmit
feeds the packet back to the bridge via br_multicast_rcv, which in turn
calls br_multicast_add_group, which then deadlocks on multicast_lock.
The fix is to move the call br_multicast_join_snoopers outside of the
critical section. This works since br_multicast_join_snoopers only deals
with IP and does not modify any multicast data structures of the bridge,
so there's no need to hold the lock.
Steps to reproduce:
1. sysctl net.ipv6.conf.all.force_mld_version=1
2. have another querier
3. ip link set dev bridge type bridge mcast_snooping 0 && \
ip link set dev bridge type bridge mcast_snooping 1 < deadlock >
A typical call trace looks like the following:
[ 936.251495] _raw_spin_lock+0x5c/0x68
[ 936.255221] br_multicast_add_group+0x40/0x170 [bridge]
[ 936.260491] br_multicast_rcv+0x7ac/0xe30 [bridge]
[ 936.265322] br_dev_xmit+0x140/0x368 [bridge]
[ 936.269689] dev_hard_start_xmit+0x94/0x158
[ 936.273876] __dev_queue_xmit+0x5ac/0x7f8
[ 936.277890] dev_queue_xmit+0x10/0x18
[ 936.281563] neigh_resolve_output+0xec/0x198
[ 936.285845] ip6_finish_output2+0x240/0x710
[ 936.290039] __ip6_finish_output+0x130/0x170
[ 936.294318] ip6_output+0x6c/0x1c8
[ 936.297731] NF_HOOK.constprop.0+0xd8/0xe8
[ 936.301834] igmp6_send+0x358/0x558
[ 936.305326] igmp6_join_group.part.0+0x30/0xf0
[ 936.309774] igmp6_group_added+0xfc/0x110
[ 936.313787] __ipv6_dev_mc_inc+0x1a4/0x290
[ 936.317885] ipv6_dev_mc_inc+0x10/0x18
[ 936.321677] br_multicast_open+0xbc/0x110 [bridge]
[ 936.326506] br_multicast_toggle+0xec/0x140 [bridge]
Fixes: 4effd28c12 ("bridge: join all-snoopers multicast address")
Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20201204235628.50653-1-Joseph.Huang@garmin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume noticed that: for segments udp_queue_rcv_one_skb() returns the
proto, and it should pass "ret" unmodified to ip_protocol_deliver_rcu().
Otherwize, with a negtive value passed, it will underflow inet_protos.
This can be reproduced with IPIP FOU:
# ip fou add port 5555 ipproto 4
# ethtool -K eth1 rx-gro-list on
Fixes: cf329aa42b ("udp: cope with UDP GRO packet misdirection")
Reported-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Changing 'return start' to 'return action_start' can fix this bug.
Fixes: 69929d4c49 ("net: openvswitch: fix TTL decrement action netlink message format")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20201204114314.1596-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: f8ed289fab ("bridge: vlan: use br_vlan_(get|put)_master to deal with refcounts")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/1607071737-33875-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: d15662682d ("ipv4: Allow ipv6 gateway with ipv4 routes")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/1607071695-33740-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
with the following tdc testcase:
83be: (qdisc, fq_pie) Create FQ-PIE with invalid number of flows
as fq_pie_init() fails, fq_pie_destroy() is called to clean up. Since the
timer is not yet initialized, it's possible to observe a splat like this:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 975 Comm: tc Not tainted 5.10.0-rc4+ #298
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
Call Trace:
dump_stack+0x99/0xcb
register_lock_class+0x12dd/0x1750
__lock_acquire+0xfe/0x3970
lock_acquire+0x1c8/0x7f0
del_timer_sync+0x49/0xd0
fq_pie_destroy+0x3f/0x80 [sch_fq_pie]
qdisc_create+0x916/0x1160
tc_modify_qdisc+0x3c4/0x1630
rtnetlink_rcv_msg+0x346/0x8e0
netlink_unicast+0x439/0x630
netlink_sendmsg+0x719/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5ba/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
[...]
ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0
WARNING: CPU: 0 PID: 975 at lib/debugobjects.c:508 debug_print_object+0x162/0x210
[...]
Call Trace:
debug_object_assert_init+0x268/0x380
try_to_del_timer_sync+0x6a/0x100
del_timer_sync+0x9e/0xd0
fq_pie_destroy+0x3f/0x80 [sch_fq_pie]
qdisc_create+0x916/0x1160
tc_modify_qdisc+0x3c4/0x1630
rtnetlink_rcv_msg+0x346/0x8e0
netlink_rcv_skb+0x120/0x380
netlink_unicast+0x439/0x630
netlink_sendmsg+0x719/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5ba/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
fix it moving timer_setup() before any failure, like it was done on 'red'
with former commit 608b4adab1 ("net_sched: initialize timer earlier in
red_init()").
Fixes: ec97ecf1eb ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/2e78e01c504c633ebdff18d041833cf2e079a3a4.1607020450.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During restarrt, mac80211 is supposed to reconfigure the driver.
When there's a monitor interface, the interface is added and the
channel context for it was created, but not assigned to it as it
was not considered running during the restart.
Fix this by setting SDATA_STATE_RUNNING while adding monitor
interfaces.
Signed-off-by: Borwankar, Antara <antara.borwankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.e1df99693a4c.I494579f28018c2d0b9d4083a664cf872c28405ae@changeid
[reword commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_chandef_he_6ghz_oper() needs to return true if it
determined a value 6 GHz chandef, fix that.
Fixes: 1d00ce807e ("mac80211: support S1G association")
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/1606121152-3452-1-git-send-email-wgong@codeaurora.org
[rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
when 'act_mpls' is used to mangle the LSE, the current value is read from
the packet dereferencing 4 bytes at mpls_hdr(): ensure that the label is
contained in the skb "linear" area.
Found by code inspection.
v2:
- use MPLS_HLEN instead of sizeof(new_lse), thanks to Jakub Kicinski
Fixes: 2a2ea50870 ("net: sched: add mpls manipulation actions to TC")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/3243506cba43d14858f3bd21ee0994160e44d64a.1606987058.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
when openvswitch is configured to mangle the LSE, the current value is
read from the packet dereferencing 4 bytes at mpls_hdr(): ensure that
the label is contained in the skb "linear" area.
Found by code inspection.
Fixes: d27cf5c59a ("net: core: add MPLS update core helper and use in OvS")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/aa099f245d93218b84b5c056b67b6058ccf81a66.1606987185.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_mpls_dec_ttl() reads the LSE without ensuring that it is contained in
the skb "linear" area. Fix this calling pskb_may_pull() before reading the
current ttl.
Found by code inspection.
Fixes: 2a2ea50870 ("net: sched: add mpls manipulation actions to TC")
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/53659f28be8bc336c113b5254dc637cc76bbae91.1606987074.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .x25_addr[] address comes from the user and is not necessarily
NUL terminated. This leads to a couple problems. The first problem is
that the strlen() in x25_bind() can read beyond the end of the buffer.
The second problem is more subtle and could result in memory corruption.
The call tree is:
x25_connect()
--> x25_write_internal()
--> x25_addr_aton()
The .x25_addr[] buffers are copied to the "addresses" buffer from
x25_write_internal() so it will lead to stack corruption.
Verify that the strings are NUL terminated and return -EINVAL if they
are not.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: a9288525d2 ("X25: Dont let x25_bind use addresses containing characters")
Reported-by: "kiyin(尹亮)" <kiyin@tencent.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/X8ZeAKm8FnFpN//B@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzkaller managed to crash the kernel using an NBMA ip6gre interface. I
could reproduce it creating an NBMA ip6gre interface and forwarding
traffic to it:
skbuff: skb_under_panic: text:ffffffff8250e927 len:148 put:44 head:ffff8c03c7a33
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:109!
Call Trace:
skb_push+0x10/0x10
ip6gre_header+0x47/0x1b0
neigh_connected_output+0xae/0xf0
ip6gre tunnel provides its own header_ops->create, and sets it
conditionally when initializing the tunnel in NBMA mode. When
header_ops->create is used, dev->hard_header_len should reflect the
length of the header created. Otherwise, when not used,
dev->needed_headroom should be used.
Fixes: eb95f52fc7 ("net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap")
Cc: Maria Pasechnik <mariap@mellanox.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201130161911.464106-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 682cd3cf94
("tipc: confgiure and apply UDP bearer MTU on running links"), we
introduced a function to change UDP bearer MTU and applied this new value
across existing per-link. However, we did not apply this new MTU value at
node level. This lead to packet dropped at link level if its size is
greater than new MTU value.
To fix this issue, we also apply this new MTU value for node level.
Fixes: 682cd3cf94 ("tipc: confgiure and apply UDP bearer MTU on running links")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Link: https://lore.kernel.org/r/20201130025544.3602-1-hoang.h.le@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix insufficient validation of IPSET_ATTR_IPADDR_IPV6 reported
by syzbot.
2) Remove spurious reports on nf_tables when lockdep gets disabled,
from Florian Westphal.
3) Fix memleak in the error path of error path of
ip_vs_control_net_init(), from Wang Hai.
4) Fix missing control data in flow dissector, otherwise IP address
matching in hardware offload infra does not work.
5) Fix hardware offload match on prefix IP address when userspace
does not send a bitwise expression to represent the prefix.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nftables_offload: build mask based from the matching bytes
netfilter: nftables_offload: set address type in control dissector
ipvs: fix possible memory leak in ip_vs_control_net_init
netfilter: nf_tables: avoid false-postive lockdep splat
netfilter: ipset: prevent uninit-value in hash_ip6_add
====================
Link: https://lore.kernel.org/r/20201127190313.24947-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When inet_rtm_getroute() was converted to use the RCU variants of
ip_route_input() and ip_route_output_key(), the TOS parameters
stopped being masked with IPTOS_RT_MASK before doing the route lookup.
As a result, "ip route get" can return a different route than what
would be used when sending real packets.
For example:
$ ip route add 192.0.2.11/32 dev eth0
$ ip route add unreachable 192.0.2.11/32 tos 2
$ ip route get 192.0.2.11 tos 2
RTNETLINK answers: No route to host
But, packets with TOS 2 (ECT(0) if interpreted as an ECN bit) would
actually be routed using the first route:
$ ping -c 1 -Q 2 192.0.2.11
PING 192.0.2.11 (192.0.2.11) 56(84) bytes of data.
64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.173 ms
--- 192.0.2.11 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.173/0.173/0.173/0.000 ms
This patch re-applies IPTOS_RT_MASK in inet_rtm_getroute(), to
return results consistent with real route lookups.
Fixes: 3765d35ed8 ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/b2d237d08317ca55926add9654a48409ac1b8f5b.1606412894.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2020-11-28
1) Do not reference the skb for xsk's generic TX side since when looped
back into RX it might crash in generic XDP, from Björn Töpel.
2) Fix umem cleanup on a partially set up xsk socket when being destroyed,
from Magnus Karlsson.
3) Fix an incorrect netdev reference count when failing xsk_bind() operation,
from Marek Majtyka.
4) Fix bpftool to set an error code on failed calloc() in build_btf_type_table(),
from Zhen Lei.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add MAINTAINERS entry for BPF LSM
bpftool: Fix error return value in build_btf_type_table
net, xsk: Avoid taking multiple skbuff references
xsk: Fix incorrect netdev reference count
xsk: Fix umem cleanup bug at socket destruct
MAINTAINERS: Update XDP and AF_XDP entries
====================
Link: https://lore.kernel.org/r/20201128005104.1205-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix head/tailroom issues for fragments, by Sven Eckelmann (3 patches)
-----BEGIN PGP SIGNATURE-----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=mORx
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20201127' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Fix head/tailroom issues for fragments, by Sven Eckelmann (3 patches)
* tag 'batadv-net-pullrequest-20201127' of git://git.open-mesh.org/linux-merge:
batman-adv: Don't always reallocate the fragmentation skb head
batman-adv: Reserve needed_*room for fragments
batman-adv: Consider fragmentation for needed_headroom
====================
Link: https://lore.kernel.org/r/20201127173849.19208-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netfilter changes PACKET_OTHERHOST to PACKET_HOST before invoking the
hooks as, while it's an expected value for a bridge, routing expects
PACKET_HOST. The change is undone later on after hook traversal. This
can be seen with pairs of functions updating skb>pkt_type and then
reverting it to its original value:
For hook NF_INET_PRE_ROUTING:
setup_pre_routing / br_nf_pre_routing_finish
For hook NF_INET_FORWARD:
br_nf_forward_ip / br_nf_forward_finish
But the third case where netfilter does this, for hook
NF_INET_POST_ROUTING, the packet type is changed in br_nf_post_routing
but never reverted. A comment says:
/* We assume any code from br_dev_queue_push_xmit onwards doesn't care
* about the value of skb->pkt_type. */
But when having a tunnel (say vxlan) attached to a bridge we have the
following call trace:
br_nf_pre_routing
br_nf_pre_routing_ipv6
br_nf_pre_routing_finish
br_nf_forward_ip
br_nf_forward_finish
br_nf_post_routing <- pkt_type is updated to PACKET_HOST
br_nf_dev_queue_xmit <- but not reverted to its original value
vxlan_xmit
vxlan_xmit_one
skb_tunnel_check_pmtu <- a check on pkt_type is performed
In this specific case, this creates issues such as when an ICMPv6 PTB
should be sent back. When CONFIG_BRIDGE_NETFILTER is enabled, the PTB
isn't sent (as skb_tunnel_check_pmtu checks if pkt_type is PACKET_HOST
and returns early).
If the comment is right and no one cares about the value of
skb->pkt_type after br_dev_queue_push_xmit (which isn't true), resetting
it to its original value should be safe.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20201123174902.622102-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAl/Ay8sTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqZvTB/9TfdD9pr5E4zIfStIlir7bvamDRK3y
QVQd4+gaB6gLKNAQo0Kh+osbMZAm43ixzEtoLEHDOd+XaaNDyJdUpNUXyf+/ZZgs
twMoCuY1vnO/1LPtVhLuggiyUWhc8YFPs7ZuFYmAWS+kYDMG4qxF3rMHcTjKw+bD
TcD383ZldO8I2cTmdhT8ldx3tk0UUSCvG284Db43asUkTOhPs8SrkFLVlAZZfcNc
d3gxzQYuMyR/s/ektyFP39ed9PO/OOQcg401XbT7aXvnCgaecTJHLIDfSvz6f69M
HHybn8CWs68+Ne4k6kC4c5tGJzz3QGt+q1dO1J1IENG99DsDpoEnfNiS
=xlpC
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-5.10-20201127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2020-11-27
The first patch is by me and target the gs_usb driver and fixes the endianess
problem with candleLight firmware.
Another patch by me for the mcp251xfd driver add sanity checking to bail out if
no IRQ is configured.
The next three patches target the m_can driver. A patch by me removes the
hardcoded IRQF_TRIGGER_FALLING from the request_threaded_irq() as this clashes
with the trigger level specified in the DT. Further a patch by me fixes the
nominal bitiming tseg2 min value for modern m_can cores. Pankaj Sharma's patch
add support for cores version 3.3.x.
The last patch by Oliver Hartkopp is for af_can and converts a WARN() into a
pr_warn(), which is triggered by the syzkaller. It was able to create a
situation where the closing of a socket runs simultaneously to the notifier
call chain for removing the CAN network device in use.
* tag 'linux-can-fixes-for-5.10-20201127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
can: gs_usb: fix endianess problem with candleLight firmware
====================
Link: https://lore.kernel.org/r/20201127100301.512603-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When setting sk_err, set it to ee_errno, not ee_origin.
Commit f5f99309fa ("sock: do not set sk_err in
sock_dequeue_err_skb") disabled updating sk_err on errq dequeue,
which is correct for most error types (origins):
- sk->sk_err = err;
Commit 38b257938a ("sock: reset sk_err when the error queue is
empty") reenabled the behavior for IMCP origins, which do require it:
+ if (icmp_next)
+ sk->sk_err = SKB_EXT_ERR(skb_next)->ee.ee_origin;
But read from ee_errno.
Fixes: 38b257938a ("sock: reset sk_err when the error queue is empty")
Reported-by: Ayush Ranjan <ayushranjan@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20201126151220.2819322-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If an msk listener receives an MPJ carrying an invalid token, it
will zero the request socket msk entry. That should later
cause fallback and subflow reset - as per RFC - at
subflow_syn_recv_sock() time due to failing hmac validation.
Since commit 4cf8b7e48a ("subflow: introduce and use
mptcp_can_accept_new_subflow()"), we unconditionally dereference
- in mptcp_can_accept_new_subflow - the subflow request msk
before performing hmac validation. In the above scenario we
hit a NULL ptr dereference.
Address the issue doing the hmac validation earlier.
Fixes: 4cf8b7e48a ("subflow: introduce and use mptcp_can_accept_new_subflow()")
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/03b2cfa3ac80d8fc18272edc6442a9ddf0b1e34e.1606400227.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the openvswitch module is not accepting the correctly formated
netlink message for the TTL decrement action. For both setting and getting
the dec_ttl action, the actions should be nested in the
OVS_DEC_TTL_ATTR_ACTION attribute as mentioned in the openvswitch.h uapi.
When the original patch was sent, it was tested with a private OVS userspace
implementation. This implementation was unfortunately not upstreamed and
reviewed, hence an erroneous version of this patch was sent out.
Leaving the patch as-is would cause problems as the kernel module could
interpret additional attributes as actions and vice-versa, due to the
actions not being encapsulated/nested within the actual attribute, but
being concatinated after it.
Fixes: 744676e777 ("openvswitch: add TTL decrement action")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/160622121495.27296.888010441924340582.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Userspace might match on prefix bytes of header fields if they are on
the byte boundary, this requires that the mask is adjusted accordingly.
Use NFT_OFFLOAD_MATCH_EXACT() for meta since prefix byte matching is not
allowed for this type of selector.
The bitwise expression might be optimized out by userspace, hence the
kernel needs to infer the prefix from the number of payload bytes to
match on. This patch adds nft_payload_offload_mask() to calculate the
bitmask to match on the prefix.
Fixes: c9626a2cbd ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds nft_flow_rule_set_addr_type() to set the address type
from the nft_payload expression accordingly.
If the address type is not set in the control dissector then a rule that
matches either on source or destination IP address does not work.
After this patch, nft hardware offload generates the flow dissector
configuration as tc-flower does to match on an IP address.
This patch has been also tested functionally to make sure packets are
filtered out by the NIC.
This is also getting the code aligned with the existing netfilter flow
offload infrastructure which is also setting the control dissector.
Fixes: c9626a2cbd ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
To detect potential bugs in CAN protocol implementations (double removal of
receiver entries) a WARN() statement has been used if no matching list item was
found for removal.
The fault injection issued by syzkaller was able to create a situation where
the closing of a socket runs simultaneously to the notifier call chain for
removing the CAN network device in use.
This case is very unlikely in real life but it doesn't break anything.
Therefore we just replace the WARN() statement with pr_warn() to preserve the
notification for the CAN protocol development.
Reported-by: syzbot+381d06e0c8eaacb8706f@syzkaller.appspotmail.com
Reported-by: syzbot+d0ddd88c9a7432f041e6@syzkaller.appspotmail.com
Reported-by: syzbot+76d62d3b8162883c7d11@syzkaller.appspotmail.com
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201126192140.14350-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When a packet is fragmented by batman-adv, the original batman-adv header
is not modified. Only a new fragmentation is inserted between the original
one and the ethernet header. The code must therefore make sure that it has
a writable region of this size in the skbuff head.
But it is not useful to always reallocate the skbuff by this size even when
there would be more than enough headroom still in the skb. The reallocation
is just to costly during in this codepath.
Fixes: ee75ed8887 ("batman-adv: Fragment and send skbs larger than mtu")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The batadv net_device is trying to propagate the needed_headroom and
needed_tailroom from the lower devices. This is needed to avoid cost
intensive reallocations using pskb_expand_head during the transmission.
But the fragmentation code split the skb's without adding extra room at the
end/beginning of the various fragments. This reduced the performance of
transmissions over complex scenarios (batadv on vxlan on wireguard) because
the lower devices had to perform the reallocations at least once.
Fixes: ee75ed8887 ("batman-adv: Fragment and send skbs larger than mtu")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
If a batman-adv packets has to be fragmented, then the original batman-adv
packet header is not stripped away. Instead, only a new header is added in
front of the packet after it was split.
This size must be considered to avoid cost intensive reallocations during
the transmission through the various device layers.
Fixes: 7bca68c784 ("batman-adv: Add lower layer needed_(head|tail)room to own ones")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
tls_device_offload_cleanup_rx doesn't clear tls_ctx->netdev after
calling tls_dev_del if TLX TX offload is also enabled. Clearing
tls_ctx->netdev gets postponed until tls_device_gc_task. It leaves a
time frame when tls_device_down may get called and call tls_dev_del for
RX one extra time, confusing the driver, which may lead to a crash.
This patch corrects this racy behavior by adding a flag to prevent
tls_device_down from calling tls_dev_del the second time.
Fixes: e8f6979981 ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20201125221810.69870-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When devlink reload operation is not used, netdev of an Ethernet port may
be present in different net namespace than the net namespace of the
devlink instance.
Ensure that both the devlink instance and devlink port netdev are located
in same net namespace.
Fixes: 070c63f20f ("net: devlink: allow to change namespaces during reload")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A netdevice of a devlink port can be moved to different net namespace
than its parent devlink instance.
This scenario occurs when devlink reload is not used.
When netdevice is undergoing migration to net namespace, its ifindex
and name may change.
In such use case, devlink port query may read stale netdev attributes.
Fix it by reading them under rtnl lock.
Fixes: bfcd3a4661 ("Introduce devlink infrastructure")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are reports wrt lockdep splat in nftables, e.g.:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 31416 at net/netfilter/nf_tables_api.c:622
lockdep_nfnl_nft_mutex_not_held+0x28/0x38 [nf_tables]
...
These are caused by an earlier, unrelated bug such as a n ABBA deadlock
in a different subsystem.
In such an event, lockdep is disabled and lockdep_is_held returns true
unconditionally. This then causes the WARN() in nf_tables.
Make the WARN conditional on lockdep still active to avoid this.
Fixes: f102d66b33 ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/linux-kselftest/CA+G9fYvFUpODs+NkSYcnwKnXm62tmP=ksLeBPmB+KFrB2rvCtQ@mail.gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
After cited commit, gro_cells_destroy() became damn slow
on hosts with a lot of cores.
This is because we have one additional synchronize_net() per cpu as
stated in the changelog.
gro_cells_init() is setting NAPI_STATE_NO_BUSY_POLL, and this was enough
to not have one synchronize_net() call per netif_napi_del()
We can factorize all the synchronize_net() to a single one,
right before freeing per-cpu memory.
Fixes: 5198d545db ("net: remove napi_hash_del() from driver-facing API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201124203822.1360107-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- set module owner to THIS_MODULE, by Taehee Yoo
-----BEGIN PGP SIGNATURE-----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=Qr0B
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20201124' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- set module owner to THIS_MODULE, by Taehee Yoo
* tag 'batadv-net-pullrequest-20201124' of git://git.open-mesh.org/linux-merge:
batman-adv: set .owner to THIS_MODULE
====================
Link: https://lore.kernel.org/r/20201124134417.17269-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a BPF program is used to select between a type of TCP congestion
control algorithm that uses either ECN or not there is a case where the
synack for the frame was coming up without the ECT0 bit set. A bit of
research found that this was due to the final socket being configured to
dctcp while the listener socket was staying in cubic.
To reproduce it all that is needed is to monitor TCP traffic while running
the sample bpf program "samples/bpf/tcp_cong_kern.c". What is observed,
assuming tcp_dctcp module is loaded or compiled in and the traffic matches
the rules in the sample file, is that for all frames with the exception of
the synack the ECT0 bit is set.
To address that it is necessary to make one additional call to
tcp_bpf_ca_needs_ecn using the request socket and then use the output of
that to set the ECT0 bit for the tos/tclass of the packet.
Fixes: 91b5b21c7c ("bpf: Add support for changing congestion control")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/160593039663.2604.1374502006916871573.stgit@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 642e450b6b ("xsk: Do not discard packet when NETDEV_TX_BUSY")
addressed the problem that packets were discarded from the Tx AF_XDP
ring, when the driver returned NETDEV_TX_BUSY. Part of the fix was
bumping the skbuff reference count, so that the buffer would not be
freed by dev_direct_xmit(). A reference count larger than one means
that the skbuff is "shared", which is not the case.
If the "shared" skbuff is sent to the generic XDP receive path,
netif_receive_generic_xdp(), and pskb_expand_head() is entered the
BUG_ON(skb_shared(skb)) will trigger.
This patch adds a variant to dev_direct_xmit(), __dev_direct_xmit(),
where a user can select the skbuff free policy. This allows AF_XDP to
avoid bumping the reference count, but still keep the NETDEV_TX_BUSY
behavior.
Fixes: 642e450b6b ("xsk: Do not discard packet when NETDEV_TX_BUSY")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201123175600.146255-1-bjorn.topel@gmail.com
Fix reload stats structure exposed to the user. Change stats structure
hierarchy to have the reload action as a parent of the stat entry and
then stat entry includes value per limit. This will also help to avoid
string concatenation on iproute2 output.
Reload stats structure before this fix:
"stats": {
"reload": {
"driver_reinit": 2,
"fw_activate": 1,
"fw_activate_no_reset": 0
}
}
After this fix:
"stats": {
"reload": {
"driver_reinit": {
"unspecified": 2
},
"fw_activate": {
"unspecified": 1,
"no_reset": 0
}
}
Fixes: a254c26426 ("devlink: Add reload stats")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/1606109785-25197-1-git-send-email-moshe@mellanox.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the patchset merged by commit b9fcf0a0d8
("Merge branch 'support-AF_PACKET-for-layer-3-devices'") L3 devices which
did not have header_ops were given one for the purpose of protocol parsing
on af_packet transmit path.
That change made af_packet receive path regard these devices as having a
visible L3 header and therefore aligned incoming skb->data to point to the
skb's mac_header. Some devices, such as ipip, xfrmi, and others, do not
reset their mac_header prior to ingress and therefore their incoming
packets became malformed.
Ideally these devices would reset their mac headers, or af_packet would be
able to rely on dev->hard_header_len being 0 for such cases, but it seems
this is not the case.
Fix by changing af_packet RX ll visibility criteria to include the
existence of a '.create()' header operation, which is used when creating
a device hard header - via dev_hard_header() - by upper layers, and does
not exist in these L3 devices.
As this predicate may be useful in other situations, add it as a common
dev_has_header() helper in netdevice.h.
Fixes: b9fcf0a0d8 ("Merge branch 'support-AF_PACKET-for-layer-3-devices'")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20201121062817.3178900-1-eyal.birger@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Starting from commit 8692cefc43 ("virtio_vsock: Fix race condition
in virtio_transport_recv_pkt"), we discard packets in
virtio_transport_recv_pkt() if the socket has been released.
When the socket is connected, we schedule a delayed work to wait the
RST packet from the other peer, also if SHUTDOWN_MASK is set in
sk->sk_shutdown.
This is done to complete the virtio-vsock shutdown algorithm, releasing
the port assigned to the socket definitively only when the other peer
has consumed all the packets.
If we discard the RST packet received, the socket will be closed only
when the VSOCK_CLOSE_TIMEOUT is reached.
Sergio discovered the issue while running ab(1) HTTP benchmark using
libkrun [1] and observing a latency increase with that commit.
To avoid this issue, we discard packet only if the socket is really
closed (SOCK_DONE flag is set).
We also set SOCK_DONE in virtio_transport_release() when we don't need
to wait any packets from the other peer (we didn't schedule the delayed
work). In this case we remove the socket from the vsock lists, releasing
the port assigned.
[1] https://github.com/containers/libkrun
Fixes: 8692cefc43 ("virtio_vsock: Fix race condition in virtio_transport_recv_pkt")
Cc: justin.he@arm.com
Reported-by: Sergio Lopez <slp@redhat.com>
Tested-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jia He <justin.he@arm.com>
Link: https://lore.kernel.org/r/20201120104736.73749-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the TCP stack is in SYN flood mode, the server child socket is
created from the SYN cookie received in a TCP packet with the ACK flag
set.
The child socket is created when the server receives the first TCP
packet with a valid SYN cookie from the client. Usually, this packet
corresponds to the final step of the TCP 3-way handshake, the ACK
packet. But is also possible to receive a valid SYN cookie from the
first TCP data packet sent by the client, and thus create a child socket
from that SYN cookie.
Since a client socket is ready to send data as soon as it receives the
SYN+ACK packet from the server, the client can send the ACK packet (sent
by the TCP stack code), and the first data packet (sent by the userspace
program) almost at the same time, and thus the server will equally
receive the two TCP packets with valid SYN cookies almost at the same
instant.
When such event happens, the TCP stack code has a race condition that
occurs between the momement a lookup is done to the established
connections hashtable to check for the existence of a connection for the
same client, and the moment that the child socket is added to the
established connections hashtable. As a consequence, this race condition
can lead to a situation where we add two child sockets to the
established connections hashtable and deliver two sockets to the
userspace program to the same client.
This patch fixes the race condition by checking if an existing child
socket exists for the same client when we are adding the second child
socket to the established connections socket. If an existing child
socket exists, we drop the packet and discard the second child socket
to the same client.
Signed-off-by: Ricardo Dias <rdias@singlestore.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201120111133.GA67501@rdias-suse-pc.lan
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix incorrect netdev reference count in xsk_bind operation. Incorrect
reference count of the device appears when a user calls bind with the
XDP_ZEROCOPY flag on an interface which does not support zero-copy.
In such a case, an error is returned but the reference count is not
decreased. This change fixes the fault, by decreasing the reference count
in case of such an error.
The problem being corrected appeared in '162c820ed896' for the first time,
and the code was moved to new file location over the time with commit
'c2d3d6a47462'. This specific patch applies to all version starting
from 'c2d3d6a47462'. The same solution should be applied but on different
file (net/xdp/xdp_umem.c) and function (xdp_umem_assign_dev) for versions
from '162c820ed896' to 'c2d3d6a47462' excluded.
Fixes: 162c820ed8 ("xdp: hold device for umem regardless of zero-copy mode")
Signed-off-by: Marek Majtyka <marekx.majtyka@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20201120151443.105903-1-marekx.majtyka@intel.com
Child sockets erroneously inherit their parent's sk_type (ie. SOCK_*),
instead of the PF_IUCV protocol that the parent was created with in
iucv_sock_create().
We're currently not using sk->sk_protocol ourselves, so this shouldn't
have much impact (except eg. getting the output in skb_dump() right).
Fixes: eac3731bd0 ("[S390]: Add AF_IUCV socket support")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Link: https://lore.kernel.org/r/20201120100657.34407-1-jwi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
