[ Upstream commit f8fb97c915954fc6de6513cdf277103b5c6df7b3 ]
RGB output doesn't allow to change parent clock rate of the display and
PCLK rate is set to 0Hz in this case. The tegra_dc_commit_state() shall
not set the display clock to 0Hz since this change propagates to the
parent clock. The DISP clock is defined as a NODIV clock by the tegra-clk
driver and all NODIV clocks use the CLK_SET_RATE_PARENT flag.
This bug stayed unnoticed because by default PLLP is used as the parent
clock for the display controller and PLLP silently skips the erroneous 0Hz
rate changes because it always has active child clocks that don't permit
rate changes. The PLLP isn't acceptable for some devices that we want to
upstream (like Samsung Galaxy Tab and ASUS TF700T) due to a display panel
clock rate requirements that can't be fulfilled by using PLLP and then the
bug pops up in this case since parent clock is set to 0Hz, killing the
display output.
Don't touch DC clock if pclk=0 in order to fix the problem.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75f94ecbd0dfd2ac4e671f165f5ae864b7301422 ]
If this service is enabled and the system rebooted, Systemd's initial
attempt to start this unit file may fail in case the kvm module is not
loaded. Since we did not specify a delay for the retries, Systemd
restarts with a minimum delay a number of times before giving up and
disabling the service. Which means a subsequent kvm module load will
have kvm running without monitoring.
Adding a delay to fix this.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20210325122949.1433271-1-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59300b36f85f254260c81d9dd09195fa49eb0f98 ]
It is possible that on error pg->size can be zero when getting its order,
which would return a -1 value. It is dangerous to pass in an order of -1
to free_pages(). Check if order is greater than or equal to zero before
calling free_pages().
Link: https://lore.kernel.org/lkml/20210330093916.432697c7@gandalf.local.home/
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff132c5f93c06bd4432bbab5c369e468653bdec4 ]
Before this patch, gfs2's freeze function failed to report an error
when the target file system was already frozen as it should (and as
generic vfs function freeze_super does. Similarly, gfs2's thaw function
failed to report an error when trying to thaw a file system that is not
frozen, as vfs function thaw_super does. The errors were checked, but
it always returned a 0 return code.
This patch adds the missing error return codes to gfs2 freeze and thaw.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33ce7f2f95cabb5834cf0906308a5cb6103976da ]
When CONFIG_OF is disabled, building with 'make W=1' produces warnings
about out of bounds array access:
drivers/gpu/drm/imx/imx-ldb.c: In function 'imx_ldb_set_clock.constprop':
drivers/gpu/drm/imx/imx-ldb.c:186:8: error: array subscript -22 is below array bounds of 'struct clk *[4]' [-Werror=array-bounds]
Add an error check before the index is used, which helps with the
warning, as well as any possible other error condition that may be
triggered at runtime.
The warning could be fixed by adding a Kconfig depedency on CONFIG_OF,
but Liu Ying points out that the driver may hit the out-of-bounds
problem at runtime anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a354a64d91eec3e0f8ef0eed575b480fd75b999c ]
Disable guest access to the Trace Filter control registers.
We do not advertise the Trace filter feature to the guest
(ID_AA64DFR0_EL1: TRACE_FILT is cleared) already, but the guest
can still access the TRFCR_EL1 unless we trap it.
This will also make sure that the guest cannot fiddle with
the filtering controls set by a nvhe host.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210323120647.454211-3-suzuki.poulose@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d676673d665fd2162e7e466dcfbe5373bfdb73e ]
Currently we advertise the ID_AA6DFR0_EL1.TRACEVER for the guest,
when the trace register accesses are trapped (CPTR_EL2.TTA == 1).
So, the guest will get an undefined instruction, if trusts the
ID registers and access one of the trace registers.
Lets be nice to the guest and hide the feature to avoid
unexpected behavior.
Even though this can be done at KVM sysreg emulation layer,
we do this by removing the TRACEVER from the sanitised feature
register field. This is fine as long as the ETM drivers
can handle the individual trace units separately, even
when there are differences among the CPUs.
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210323120647.454211-2-suzuki.poulose@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62dd0f98a0e5668424270b47a0c2e973795faba7 ]
Interrupting mount with ^C quickly enough can cause the kthread_run()
calls in gfs2's init_threads() to fail and the error path leads to a
deadlock on the s_umount rwsem. The abridged chain of events is:
[mount path]
get_tree_bdev()
sget_fc()
alloc_super()
down_write_nested(&s->s_umount, SINGLE_DEPTH_NESTING); [acquired]
gfs2_fill_super()
gfs2_make_fs_rw()
init_threads()
kthread_run()
( Interrupted )
[Error path]
gfs2_gl_hash_clear()
flush_workqueue(glock_workqueue)
wait_for_completion()
[workqueue context]
glock_work_func()
run_queue()
do_xmote()
freeze_go_sync()
freeze_super()
down_write(&sb->s_umount) [deadlock]
In freeze_go_sync() there is a gfs2_withdrawn() check that we can use to
make sure freeze_super() is not called in the error path, so add a
gfs2_withdraw_delayed() call when init_threads() fails.
Ref: https://bugzilla.kernel.org/show_bug.cgi?id=212231
Reported-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 715ea61532e731c62392221238906704e63d75b6 ]
When krealloc() fails and new is NULL, no error return code of
icc_link_destroy() is assigned.
To fix this bug, ret is assigned with -ENOMEM hen new is NULL.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20210306132857.17020-1-baijiaju1990@gmail.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4ba86128ba077fbb7d86516ae24ed642e6c3adef upstream.
This reverts commit 6855e8213e06efcaf7c02a15e12b1ae64b9a7149.
Following commit in series fixes the issue without introducing regression
in error rollback of tcf_action_destroy().
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1534efc7bbc1121e92c86c2dabebaf2c9dcece19 upstream.
This patch stops dumping llsec params for monitors which we don't support
yet. Otherwise we will access llsec mib which isn't initialized for
monitors.
Reported-by: syzbot+cde43a581a8e5f317bc2@syzkaller.appspotmail.com
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-16-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9dde130937e95b72adfae64ab21d6e7e707e2dac upstream.
This patch forbids to del llsec seclevel for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.
Reported-by: syzbot+fbf4fc11a819824e027b@syzkaller.appspotmail.com
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-15-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27c746869e1a135dffc2f2a80715bb7aa00445b4 upstream.
This patch fixes a nullpointer dereference if NL802154_ATTR_SEC_DEVKEY is
not set by the user. If this is the case nl802154 will return -EINVAL.
Reported-by: syzbot+368672e0da240db53b5f@syzkaller.appspotmail.com
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210221174321.14210-4-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20d5fe2d7103f5c43ad11a3d6d259e9d61165c35 upstream.
This patch fixes a nullpointer dereference if NL802154_ATTR_SEC_KEY is
not set by the user. If this is the case nl802154 will return -EINVAL.
Reported-by: syzbot+ce4e062c2d51977ddc50@syzkaller.appspotmail.com
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210221174321.14210-3-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d1eac2f45585690d942cf47fd7fbd04093ebd1b upstream.
This patch fixes a nullpointer dereference if NL802154_ATTR_SEC_DEVICE is
not set by the user. If this is the case nl802154 will return -EINVAL.
Reported-by: syzbot+d946223c2e751d136c94@syzkaller.appspotmail.com
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210221174321.14210-2-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 37feaaf5ceb2245e474369312bb7b922ce7bce69 upstream.
This patch fixes a nullpointer dereference if NL802154_ATTR_SEC_KEY is
not set by the user. If this is the case nl802154 will return -EINVAL.
Reported-by: syzbot+ac5c11d2959a8b3c4806@syzkaller.appspotmail.com
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210221174321.14210-1-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f7f657f24405f426212c09260bf7fe8a52cef33 upstream.
This patch fixes a null pointer derefence for panid handle by move the
check for the netlink variable directly before accessing them.
Reported-by: syzbot+d4c07de0144f6f63be3a@syzkaller.appspotmail.com
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210228151817.95700-4-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1165affd484889d4986cf3b724318935a0b120d8 upstream.
syzbot found general protection fault in crypto_destroy_tfm()[1].
It was caused by wrong clean up loop in llsec_key_alloc().
If one of the tfm array members is in IS_ERR() range it will
cause general protection fault in clean up function [1].
Call Trace:
crypto_free_aead include/crypto/aead.h:191 [inline] [1]
llsec_key_alloc net/mac802154/llsec.c:156 [inline]
mac802154_llsec_key_add+0x9e0/0xcc0 net/mac802154/llsec.c:249
ieee802154_add_llsec_key+0x56/0x80 net/mac802154/cfg.c:338
rdev_add_llsec_key net/ieee802154/rdev-ops.h:260 [inline]
nl802154_add_llsec_key+0x3d3/0x560 net/ieee802154/nl802154.c:1584
genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:739
genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:800
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
genl_rcv+0x24/0x40 net/netlink/genetlink.c:811
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reported-by: syzbot+9ec037722d2603a9f52e@syzkaller.appspotmail.com
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210304152125.1052825-1-paskripkin@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0b96b4a62745397aee662670cfc2157bac03f55 upstream.
syzbot reported memory leak in peak_usb.
The problem was in case of failure after calling
->dev_init()[2] in peak_usb_create_dev()[1]. The data
allocated int dev_init() wasn't freed, so simple
->dev_free() call fix this problem.
backtrace:
[<0000000079d6542a>] kmalloc include/linux/slab.h:552 [inline]
[<0000000079d6542a>] kzalloc include/linux/slab.h:682 [inline]
[<0000000079d6542a>] pcan_usb_fd_init+0x156/0x210 drivers/net/can/usb/peak_usb/pcan_usb_fd.c:868 [2]
[<00000000c09f9057>] peak_usb_create_dev drivers/net/can/usb/peak_usb/pcan_usb_core.c:851 [inline] [1]
[<00000000c09f9057>] peak_usb_probe+0x389/0x490 drivers/net/can/usb/peak_usb/pcan_usb_core.c:949
Reported-by: syzbot+91adee8d9ebb9193d22d@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b9fbe16955152626557ec6f439f3407b7769941 upstream.
syzbot reported memory leak in atusb_probe()[1].
The problem was in atusb_alloc_urbs().
Since urb is anchored, we need to release the reference
to correctly free the urb
backtrace:
[<ffffffff82ba0466>] kmalloc include/linux/slab.h:559 [inline]
[<ffffffff82ba0466>] usb_alloc_urb+0x66/0xe0 drivers/usb/core/urb.c:74
[<ffffffff82ad3888>] atusb_alloc_urbs drivers/net/ieee802154/atusb.c:362 [inline][2]
[<ffffffff82ad3888>] atusb_probe+0x158/0x820 drivers/net/ieee802154/atusb.c:1038 [1]
Reported-by: syzbot+28a246747e0a465127f3@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cca8ea3b05c972ffb5295367e6c544369b45fbdd upstream.
When changing type with TUNSETLINK ioctl command, set tun->dev->addr_len
to match the appropriate type, using new tun_get_addr_len utility function
which returns appropriate address length for given type. Fixes a
KMSAN-found uninit-value bug reported by syzbot at:
https://syzkaller.appspot.com/bug?id=0766d38c656abeace60621896d705743aeefed51
Reported-by: syzbot+001516d86dbe88862cec@syzkaller.appspotmail.com
Diagnosed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b5ab825d9acc0f27d2f25c6252f3526832a9626 upstream.
A WARN_ON(wdev->conn) would trigger in cfg80211_sme_connect(), if multiple
send_msg(NL80211_CMD_CONNECT) system calls are made from the userland, which
should be anticipated and handled by the wireless driver. Remove this WARN_ON()
to prevent kernel panic if kernel is configured to "panic_on_warn".
Bug reported by syzbot.
Reported-by: syzbot+5f9392825de654244975@syzkaller.appspotmail.com
Signed-off-by: Du Cheng <ducheng2@gmail.com>
Link: https://lore.kernel.org/r/20210407162756.6101-1-ducheng2@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b41ba2ec54a70908067034f139aa23d0dd2985ce upstream.
On STM32MP1, the GPIO banks are subnodes of pin-controller@50002000,
see arch/arm/boot/dts/stm32mp151.dtsi. The driver for
pin-controller@50002000 is in drivers/pinctrl/stm32/pinctrl-stm32.c
and iterates over all of its DT subnodes when registering each GPIO
bank gpiochip. Each gpiochip has:
- gpio_chip.parent = dev,
where dev is the device node of the pin controller
- gpio_chip.of_node = np,
which is the OF node of the GPIO bank
Therefore, dev_fwnode(chip->parent) != of_fwnode_handle(chip.of_node),
i.e. pin-controller@50002000 != pin-controller@50002000/gpio@5000*000.
The original code behaved correctly, as it extracted the "gpio-line-names"
from of_fwnode_handle(chip.of_node) = pin-controller@50002000/gpio@5000*000.
To achieve the same behaviour, read property from the firmware node.
Fixes: 7cba1a4d5e ("gpiolib: generalize devprop_gpiochip_set_names() for device properties")
Reported-by: Marek Vasut <marex@denx.de>
Reported-by: Roman Guskov <rguskov@dh-electronics.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6855e8213e06efcaf7c02a15e12b1ae64b9a7149 upstream.
Currently, action creation using ACT API in replace mode is buggy.
When invoking for non-existent action index 42,
tc action replace action bpf obj foo.o sec <xyz> index 42
kernel creates the action, fills up the netlink response, and then just
deletes the action after notifying userspace.
tc action show action bpf
doesn't list the action.
This happens due to the following sequence when ovr = 1 (replace mode)
is enabled:
tcf_idr_check_alloc is used to atomically check and either obtain
reference for existing action at index, or reserve the index slot using
a dummy entry (ERR_PTR(-EBUSY)).
This is necessary as pointers to these actions will be held after
dropping the idrinfo lock, so bumping the reference count is necessary
as we need to insert the actions, and notify userspace by dumping their
attributes. Finally, we drop the reference we took using the
tcf_action_put_many call in tcf_action_add. However, for the case where
a new action is created due to free index, its refcount remains one.
This when paired with the put_many call leads to the kernel setting up
the action, notifying userspace of its creation, and then tearing it
down. For existing actions, the refcount is still held so they remain
unaffected.
Fortunately due to rtnl_lock serialization requirement, such an action
with refcount == 1 will not be concurrently deleted by anything else, at
best CLS API can move its refcount up and down by binding to it after it
has been published from tcf_idr_insert_many. Since refcount is atleast
one until put_many call, CLS API cannot delete it. Also __tcf_action_put
release path already ensures deterministic outcome (either new action
will be created or existing action will be reused in case CLS API tries
to bind to action concurrently) due to idr lock serialization.
We fix this by making refcount of newly created actions as 2 in ACT API
replace mode. A relaxed store will suffice as visibility is ensured only
after the tcf_idr_insert_many call.
Note that in case of creation or overwriting using CLS API only (i.e.
bind = 1), overwriting existing action object is not allowed, and any
such request is silently ignored (without error).
The refcount bump that occurs in tcf_idr_check_alloc call there for
existing action will pair with tcf_exts_destroy call made from the
owner module for the same action. In case of action creation, there
is no existing action, so no tcf_exts_destroy callback happens.
This means no code changes for CLS API.
Fixes: cae422f379 ("net: sched: use reference counting action init")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af9d316f3dd6d1385fbd1631b5103e620fc4298a upstream.
The correct property name is "nvmem-cell-names". This is what:
1. Was originally documented in the ethernet.txt
2. Is used in DTS files
3. Matches standard syntax for phandles
4. Linux net subsystem checks for
Fixes: 9d3de3c583 ("dt-bindings: net: Add YAML schemas for the generic Ethernet options")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d48b7912cc72275dc7c59ff961c8bac7ef66a92 upstream.
Clang doesn't like format strings that truncate a 32-bit
value to something shorter:
kernel/locking/lockdep.c:709:4: error: format specifies type 'short' but the argument has type 'int' [-Werror,-Wformat]
In this case, the warning is a slightly questionable, as it could realize
that both class->wait_type_outer and class->wait_type_inner are in fact
8-bit struct members, even though the result of the ?: operator becomes an
'int'.
However, there is really no point in printing the number as a 16-bit
'short' rather than either an 8-bit or 32-bit number, so just change
it to a normal %d.
Fixes: de8f5e4f2d ("lockdep: Introduce wait-type checks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210322115531.3987555-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2867b9746cef78745c594894aece6f8ef826e0b4 upstream.
Pointers should be cast with uintptr_t instead of integer. This fixes
warning when compile testing on ARM64:
drivers/clk/socfpga/clk-gate.c: In function ‘socfpga_clk_recalc_rate’:
drivers/clk/socfpga/clk-gate.c:102:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
Fixes: b7cec13f08 ("clk: socfpga: Look for the GPIO_DB_CLK by its offset")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210314110709.32599-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a62583c2853b0ab37a57dde79decea210b5fb89 upstream.
ce_add_elem() uses different return values to signal a result from
adding an element to the collector. Commit in Fixes: broke the case
where the element being added is not found in the array. Correct that.
[ bp: Rewrite commit message, add kernel-doc comments. ]
Fixes: de0e0624d8 ("RAS/CEC: Check count_threshold unconditionally")
Signed-off-by: William Roche <william.roche@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/1617722939-29670-1-git-send-email-william.roche@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4b454a82418dd76d8c0590bb3f7a99a63ea57dc5 ]
VIRTIO_F_VERSION_1 is a bit number. Use BIT_ULL() with mask
conditionals.
Also, in mlx5_vdpa_is_little_endian() use BIT_ULL for consistency with
the rest of the code.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-5-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d084d996aaf53c0cc583dc75a4fc2a67fe485846 ]
When feature VIRTIO_NET_F_MTU is negotiated on mlx5_vdpa,
22 extra bytes worth of MTU length is shown in guest.
This is because the mlx5_query_port_max_mtu API returns
the "hardware" MTU value, which does not just contain the
Ethernet payload, but includes extra lengths starting
from the Ethernet header up to the FCS altogether.
Fix the MTU so packets won't get dropped silently.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-2-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1c803a9ccd7bd3aff5e989ccfb39ed3b799b975 ]
The nla_len() is less than or equal to 16. If it's less than 16 then end
of the "gid" buffer is uninitialized.
Fixes: ae43f82867 ("IB/core: Add IP to GID netlink offload")
Link: https://lore.kernel.org/r/20210405074434.264221-1-leon@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2d0efc4be7ed320e33eaa9b6dd6f3f6011ffb8e ]
Change parameters order in aq_get_phy_register() due to wrong
statistics in PHY reported by ethtool. Previously all PHY statistics were
exactly the same for all interfaces
Now statistics are reported correctly - different for different interfaces
Fixes: 0514db37dd ("i40e: Extend PHY access with page change flag")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb9dfdd1ed40357b99a4201c8534c58c562e48c9 ]
Experimentally have found PV on hvs4 reports fifo full
error with expected settings and does not with one less
This appears as:
[drm:drm_atomic_helper_wait_for_flip_done] *ERROR* [CRTC:82:crtc-3] flip_done timed out
with bit 10 of PV_STAT set "HVS driving pixels when the PV FIFO is full"
Fixes: c8b75bca92 ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210318161328.1471556-3-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 603c4690b01aaffe3a6c3605a429f6dac39852ae ]
ipv6 bit is wrongly set by the below which causes fatal adapter lookup
engine errors for ipv4 connections while destroying a listener. Fix it to
properly check the local address for ipv6.
Fixes: 3408be145a5d ("RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server")
Link: https://lore.kernel.org/r/20210331135715.30072-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 534b1204ca4694db1093b15cf3e79a99fcb6a6da ]
Add reserved mapping to cover all the register in order to avoid setting
arbitrary values to newer FW which implements the reserved fields.
Fixes: 50b4a3c236 ("net/mlx5: PPTB and PBMC register firmware command support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce28f0fd670ddffcd564ce7119bdefbaf08f02d3 ]
Add reserved mapping to cover all the register in order to avoid
setting arbitrary values to newer FW which implements the reserved
fields.
Fixes: a58837f52d ("net/mlx5e: Expose FEC feilds and related capability bit")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a14587dfc5ad2312dabdd42a610d80ecd0dc8bea ]
The cited commit wrongly placed log_max_flow_counter field of
mlx5_ifc_flow_table_prop_layout_bits, align it to the HW spec intended
placement.
Fixes: 16f1c5bb3e ("net/mlx5: Check device capability for maximum flow counters")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed7bedd2c3ca040f1e8ea02c6590a93116b1ec78 ]
Currently, the VF down state bit is cleared after VF sending
link status request command. There is problem that when VF gets
link status replied from PF, the down state bit may still set
as 1. In this case, the link status replied from PF will be
ignored and always set VF link status to down.
To fix this problem, clear VF down state bit before VF requests
link status.
Fixes: e2cb1dec97 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a2403ca3add03f542f6b34bef9f74649969b06d ]
Li Shuang found a NULL pointer dereference crash in her testing:
[] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[] RIP: 0010:tipc_crypto_rcv_complete+0xc8/0x7e0 [tipc]
[] Call Trace:
[] <IRQ>
[] tipc_crypto_rcv+0x2d9/0x8f0 [tipc]
[] tipc_rcv+0x2fc/0x1120 [tipc]
[] tipc_udp_recv+0xc6/0x1e0 [tipc]
[] udpv6_queue_rcv_one_skb+0x16a/0x460
[] udp6_unicast_rcv_skb.isra.35+0x41/0xa0
[] ip6_protocol_deliver_rcu+0x23b/0x4c0
[] ip6_input+0x3d/0xb0
[] ipv6_rcv+0x395/0x510
[] __netif_receive_skb_core+0x5fc/0xc40
This is caused by NULL returned by tipc_aead_get(), and then crashed when
dereferencing it later in tipc_crypto_rcv_complete(). This might happen
when tipc_crypto_rcv_complete() is called by two threads at the same time:
the tmp attached by tipc_crypto_key_attach() in one thread may be released
by the one attached by that in the other thread.
This patch is to fix it by incrementing the tmp's refcnt before attaching
it instead of calling tipc_aead_get() after attaching it.
Fixes: fc1b6d6de2 ("tipc: introduce TIPC encryption & authentication")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 617085fca6375e2c1667d1fbfc6adc4034c85f04 ]
Some SPI host controllers do not support full-duplex SPI transfers.
The function mcp251x_spi_trans() does a full duplex transfer. It is
used in several places in the driver, where a TX half duplex transfer
is sufficient.
To fix support for half duplex SPI host controllers, this patch
introduces a new function mcp251x_spi_write() and changes all callers
that do a TX half duplex transfer to use mcp251x_spi_write().
Fixes: e0e25001d0 ("can: mcp251x: add support for half duplex controllers")
Link: https://lore.kernel.org/r/20210330100246.1074375-1-mkl@pengutronix.de
Cc: Tim Harvey <tharvey@gateworks.com>
Tested-By: Tim Harvey <tharvey@gateworks.com>
Reported-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07cc40fec9a85e669ea12e161a438d2cbd76f1ed ]
When version 2 of the regulatory capability flags API was implemented,
the flag to disable 11ax was defined as bit 13, but this was later
changed and the bit remained as bit 10, like in version 1. This was
never changed in the driver, so we were checking for the wrong bit in
newer devices. Fix it.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: e27c506a98 ("iwlwifi: regulatory: regulatory capabilities api change")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.6d28516b59cd.Id0248d5e4662695254f49ce37b0268834ed52918@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e729bc54bda705f64941008b018b4e41a4322bf ]
When hardware doesn't support High Speed Mode, we forget bus_freq_hz
timing adjustment. This makes the timings and real registers being
unsynchronized. Adjust bus_freq_hz when refuse high speed mode set.
Fixes: b6e67145f1 ("i2c: designware: Enable high speed mode")
Reported-by: "Song Bao Hua (Barry Song)" <song.bao.hua@hisilicon.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d51419d49930be2701c2633ae271b350397c3ca ]
'struct ovs_zone_limit' has more members than initialized in
ovs_ct_limit_get_default_limit(). The rest of the memory is a random
kernel stack content that ends up being sent to userspace.
Fix that by using designated initializer that will clear all
non-specified fields.
Fixes: 11efd5cb04 ("openvswitch: Support conntrack zone limit")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 026334a3bb6a3919b42aba9fc11843db2b77fd41 ]
Since commit 14d3d54052 ("perf session: Try to read pipe data from
file") 'perf inject' has started printing "PERFILE2h" when not processing
pipes.
The commit exposed perf to the possiblity that the input is not a pipe
but the 'repipe' parameter gets used. That causes the printing because
perf inject sets 'repipe' to true always.
The 'repipe' parameter of perf_session__new() is used by 2 functions:
- perf_file_header__read_pipe()
- trace_report()
In both cases, the functions copy data to STDOUT_FILENO when 'repipe' is
true.
Fix by setting 'repipe' to true only if the output is a pipe.
Fixes: e558a5bd8b ("perf inject: Work with files")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andrew Vagin <avagin@openvz.org>
Link: http://lore.kernel.org/lkml/20210401103605.9000-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
