Back in January I posted patches to create function based events. These were
the events that you suggested I make to allow developers to easily create
events in code where no trace event exists. After posting those changes for
review, it was suggested that we implement this instead with kprobes.
The problem with kprobes is that the interface is too complex and needs to
be simplified. Masami Hiramatsu posted patches in March and I've been
playing with them a bit. There's been a bit of clean up in the kprobe code
that was inspired by the function based event patches, and a couple of
enhancements to the kprobe event interface.
- If the arch supports it (we added support for x86), you can place a
kprobe event at the start of a function and use $arg1, $arg2, etc
to reference the arguments of a function. (Before you needed to know
what register or where on the stack the argument was).
- The second is a way to see array of events. For example, if you reference
a mac address, you can add:
echo 'p:mac ip_rcv perm_addr=+574($arg2):x8[6]' > kprobe_events
And this will produce:
mac: (ip_rcv+0x0/0x140) perm_addr={0x52,0x54,0x0,0xc0,0x76,0xec}
Other changes include
- Exporting trace_dump_stack to modules
- Have the stack tracer trace the entire stack (stop trying to remove
tracing itself, as we keep removing too much).
- Added support for SDT in uprobes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW9hdjxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmtbAP9GS/o2WSvsYLSIw4+mF94eCL06lUxp
rRrktkEofm/PagEAl2JNmvHrAJN+LIrajqXTbwlZ7Ckk1rZhCW41Am7qnQs=
=sTUM
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The biggest change here is the updates to kprobes
Back in January I posted patches to create function based events.
These were the events that you suggested I make to allow developers to
easily create events in code where no trace event exists. After
posting those changes for review, it was suggested that we implement
this instead with kprobes.
The problem with kprobes is that the interface is too complex and
needs to be simplified. Masami Hiramatsu posted patches in March and
I've been playing with them a bit. There's been a bit of clean up in
the kprobe code that was inspired by the function based event patches,
and a couple of enhancements to the kprobe event interface.
- If the arch supports it (we added support for x86), you can place a
kprobe event at the start of a function and use $arg1, $arg2, etc
to reference the arguments of a function. (Before you needed to
know what register or where on the stack the argument was).
- The second is a way to see array of events. For example, if you
reference a mac address, you can add:
echo 'p:mac ip_rcv perm_addr=+574($arg2):x8[6]' > kprobe_events
And this will produce:
mac: (ip_rcv+0x0/0x140) perm_addr={0x52,0x54,0x0,0xc0,0x76,0xec}
Other changes include
- Exporting trace_dump_stack to modules
- Have the stack tracer trace the entire stack (stop trying to remove
tracing itself, as we keep removing too much).
- Added support for SDT in uprobes"
[ SDT - "Statically Defined Tracing" are userspace markers for tracing.
Let's not use random TLA's in explanations unless they are fairly
well-established as generic (at least for kernel people) - Linus ]
* tag 'trace-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits)
tracing: Have stack tracer trace full stack
tracing: Export trace_dump_stack to modules
tracing: probeevent: Fix uninitialized used of offset in parse args
tracing/kprobes: Allow kprobe-events to record module symbol
tracing/kprobes: Check the probe on unloaded module correctly
tracing/uprobes: Fix to return -EFAULT if copy_from_user failed
tracing: probeevent: Add $argN for accessing function args
x86: ptrace: Add function argument access API
tracing: probeevent: Add array type support
tracing: probeevent: Add symbol type
tracing: probeevent: Unify fetch_insn processing common part
tracing: probeevent: Append traceprobe_ for exported function
tracing: probeevent: Return consumed bytes of dynamic area
tracing: probeevent: Unify fetch type tables
tracing: probeevent: Introduce new argument fetching code
tracing: probeevent: Remove NOKPROBE_SYMBOL from print functions
tracing: probeevent: Cleanup argument field definition
tracing: probeevent: Cleanup print argument functions
trace_uprobe: support reference counter in fd-based uprobe
perf probe: Support SDT markers having reference counter (semaphore)
...
error return value, and the other is for the self tests.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW9hYsBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiWPAQCARhYpeiWNHYGAirpI1vxaNHzutZvP
j6eaqRXu0JDfsQD7Bb19KxSHUEaPSpZIo68N5OJkoTv9UxD2KYuRysu4VQ8=
=y1Gc
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19-rc8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Masami had a couple more fixes to the synthetic events. One was a
proper error return value, and the other is for the self tests"
* tag 'trace-v4.19-rc8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
selftests/ftrace: Fix synthetic event test to delete event correctly
tracing: Return -ENOENT if there is no target synthetic event
In ebebbf0823 ("perf top: Switch default mode to overwrite mode") we
forgot to leave a way to disable that new default, add a --overwrite
option that can be disabled using --no-overwrite, since the code already
in such a way that we can readily disable this mode.
This is useful when investigating bugs with this mode like the recent
report from David Miller where lots of unknown symbols appear due to
disabling the events while processing them which disables all record
types, not just PERF_RECORD_SAMPLE, which makes it impossible to resolve
maps when we lose PERF_RECORD_MMAP records.
This can be easily seen while building a kernel, when there are lots of
short lived processes.
Reported-by: David Miller <davem@davemloft.net>
Acked-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: ebebbf0823 ("perf top: Switch default mode to overwrite mode")
Link: https://lkml.kernel.org/n/tip-oqgsz2bq4kgrnnajrafcdhie@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The pathname beautifiers so far support just one augmented pathname per
syscall, so do it just for mount's first arg, later this will get fixed.
With:
# perf probe -l
probe:vfs_getname (on getname_flags:73@acme/git/linux/fs/namei.c with pathname)
#
Later this will get added to augmented_syscalls.c (eBPF):
In one xterm:
# perf trace -e mount,umount
2687.331 ( 3.544 ms): mount/8892 mount(dev_name: /mnt, dir_name: 0x561f9ac184a0, type: 0x561f9ac1b170, flags: BIND) = 0
3912.126 ( 8.807 ms): umount/8895 umount2(name: /mnt) = 0
^C#
In the other:
$ sudo mount --bind /proc /mnt
$ sudo umount /mnt
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Benjamin Peterson <benjamin@python.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-qsvhrm2es635cl4zicqjeth2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By using the SCA_FILENAME beautifier, that works when either the
probe:vfs_getname probe is in place or with the eBPF program
tools/perf/examples/bpf/augmented_syscalls.c:
# perf probe -l
probe:vfs_getname (on getname_flags:73@acme/git/linux/fs/namei.c with pathname)
# perf trace -e umount
9630.332 ( 9.521 ms): umount/8082 umount2(name: /mnt) = 0
#
The augmented syscalls one will be done in the next patch.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Benjamin Peterson <benjamin@python.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hegbzlpd2nrn584l5jxn7sy2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When trying to trace the 'umount' syscall on x86_64 I noticed that it
was failing:
# trace -e umount umount /mnt
event syntax error: 'umount'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
This is because in the x86-64 we have it just as 'umount2':
$ grep umount arch/x86/entry/syscalls/syscall_64.tbl
166 common umount2 __x64_sys_umount
$
So if the syscall name fails, try fallbacking to looking at the aliases
we have in the syscall_fmts table to then re-lookup, now:
# trace -e umount umount -f /mnt
umount: /mnt: not mounted.
1.759 ( 0.004 ms): umount/18365 umount2(name: 0x55fbfcbc4480, flags: 1) = -1 EINVAL Invalid argument
#
Time to beautify the flags arg :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Benjamin Peterson <benjamin@python.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ukweodgzbmjd25lfkgryeft1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Take mount's 'flags' arg, to cope with this semantic, as defined in do_mount in fs/namespace.c:
/*
* Pre-0.97 versions of mount() didn't have a flags word. When the
* flags word was introduced its top half was required to have the
* magic value 0xC0ED, and this remained so until 2.4.0-test9.
* Therefore, if this magic number is present, it carries no
* information and must be discarded.
*/
We need to mask this arg, and then see if it is zero, when we simply
don't print the arg name and value.
The next patch will use this for mount's 'flag' arg.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Benjamin Peterson <benjamin@python.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-btue14k5jemayuykfrwsnh85@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Generalizing pkey_alloc__scnprintf_access_rights(), so that we can use
it with other flags-like arguments, such as mount's mountflags argument.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Benjamin Peterson <benjamin@python.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-o3ymi3104m8moaz9865g09w9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The intention is to have this as a library, since it is not perf
specific at all.
I did the switch for the files where I'm the only contributor, with the
exception of a few lines changed by Jiri Olsa.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-a04q6chdyjknm1hr305ulx8h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll use it to create tables for the 'flags' argument to the 'mount'
and 'umount' syscalls.
Add it to check_headers.sh so that when a new protocol gets added we get
a notification during the build process.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Benjamin Peterson <benjamin@python.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-yacf9jvkwfwg2g95r2us3xb3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When running the rfi_flush test, if the system is loaded, we see two
issues:
1. The L1d misses when rfi_flush is disabled increase significantly due
to other workloads interfering with the cache.
2. The L1d misses when rfi_flush is enabled sometimes goes slightly
below the expected number of misses.
To address these, let's relax the expected number of L1d misses:
1. When rfi_flush is disabled, we allow upto half the expected number of
the misses for when rfi_flush is enabled.
2. When rfi_flush is enabled, we allow ~1% lower number of cache misses.
Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull networking fixes from David Miller:
1) GRO overflow entries are not unlinked properly, resulting in list
poison pointers being dereferenced.
2) Fix bridge build with ipv6 disabled, from Nikolay Aleksandrov.
3) Direct packet access and other fixes in BPF from Daniel Borkmann.
4) gred_change_table_def() gets passed the wrong pointer, a pointer to
a set of unparsed attributes instead of the attribute itself. From
Jakub Kicinski.
5) Allow macsec device to be brought up even if it's lowerdev is down,
from Sabrina Dubroca.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net: diag: document swapped src/dst in udp_dump_one.
macsec: let the administrator set UP state even if lowerdev is down
macsec: update operstate when lower device changes
net: sched: gred: pass the right attribute to gred_change_table_def()
ptp: drop redundant kasprintf() to create worker name
net: bridge: remove ipv6 zero address check in mcast queries
net: Properly unlink GRO packets on overflow.
bpf: fix wrong helper enablement in cgroup local storage
bpf: add bpf_jit_limit knob to restrict unpriv allocations
bpf: make direct packet write unclone more robust
bpf: fix leaking uninitialized memory on pop/peek helpers
bpf: fix direct packet write into pop/peek helpers
bpf: fix cg_skb types to hint access type in may_access_direct_pkt_data
bpf: fix direct packet access for flow dissector progs
bpf: disallow direct packet access for unpriv in cg_skb
bpf: fix test suite to enable all unpriv program types
bpf, btf: fix a missing check bug in btf_parse
selftests/bpf: add config fragments BPF_STREAM_PARSER and XDP_SOCKETS
bpf: devmap: fix wrong interface selection in notifier_call
-----BEGIN PGP SIGNATURE-----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=3yxi
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is going to rebuild more than drm as it adds a new helper to
list.h for doing bulk updates. Seemed like a reasonable addition to
me.
Otherwise the usual merge window stuff lots of i915 and amdgpu, not so
much nouveau, and piles of everything else.
Core:
- Adds a new list.h helper for doing bulk list updates for TTM.
- Don't leak fb address in smem_start to userspace (comes with EXPORT
workaround for people using mali out of tree hacks)
- udmabuf device to turn memfd regions into dma-buf
- Per-plane blend mode property
- ref/unref replacements with get/put
- fbdev conflicting framebuffers code cleaned up
- host-endian format variants
- panel orientation quirk for Acer One 10
bridge:
- TI SN65DSI86 chip support
vkms:
- GEM support.
- Cursor support
amdgpu:
- Merge amdkfd and amdgpu into one module
- CEC over DP AUX support
- Picasso APU support + VCN dynamic powergating
- Raven2 APU support
- Vega20 enablement + kfd support
- ACP powergating improvements
- ABGR/XBGR display support
- VCN jpeg support
- xGMI support
- DC i2c/aux cleanup
- Ycbcr 4:2:0 support
- GPUVM improvements
- Powerplay and powerplay endian fixes
- Display underflow fixes
vmwgfx:
- Move vmwgfx specific TTM code to vmwgfx
- Split out vmwgfx buffer/resource validation code
- Atomic operation rework
bochs:
- use more helpers
- format/byteorder improvements
qxl:
- use more helpers
i915:
- GGTT coherency getparam
- Turn off resource streamer API
- More Icelake enablement + DMC firmware
- Full PPGTT for Ivybridge, Haswell and Valleyview
- DDB distribution based on resolution
- Limited range DP display support
nouveau:
- CEC over DP AUX support
- Initial HDMI 2.0 support
virtio-gpu:
- vmap support for PRIME objects
tegra:
- Initial Tegra194 support
- DMA/IOMMU integration fixes
msm:
- a6xx perf improvements + clock prefix
- GPU preemption optimisations
- a6xx devfreq support
- cursor support
rockchip:
- PX30 support
- rgb output interface support
mediatek:
- HDMI output support on mt2701 and mt7623
rcar-du:
- Interlaced modes on Gen3
- LVDS on R8A77980
- D3 and E3 SoC support
hisilicon:
- misc fixes
mxsfb:
- runtime pm support
sun4i:
- R40 TCON support
- Allwinner A64 support
- R40 HDMI support
omapdrm:
- Driver rework changing display pipeline ordering to use common code
- DMM memory barrier and irq fixes
- Errata workarounds
exynos:
- out-bridge support for LVDS bridge driver
- Samsung 16x16 tiled format support
- Plane alpha and pixel blend mode support
tilcdc:
- suspend/resume update
mali-dp:
- misc updates"
* tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits)
firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake.
drm/i915/icl: Fix signal_levels
drm/i915/icl: Fix DDI/TC port clk_off bits
drm/i915/icl: create function to identify combophy port
drm/i915/gen9+: Fix initial readout for Y tiled framebuffers
drm/i915: Large page offsets for pread/pwrite
drm/i915/selftests: Disable shrinker across mmap-exhaustion
drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode
drm/i915: Fix intel_dp_mst_best_encoder()
drm/i915: Skip vcpi allocation for MSTB ports that are gone
drm/i915: Don't unset intel_connector->mst_port
drm/i915: Only reset seqno if actually idle
drm/i915: Use the correct crtc when sanitizing plane mapping
drm/i915: Restore vblank interrupts earlier
drm/i915: Check fb stride against plane max stride
drm/amdgpu/vcn:Fix uninitialized symbol error
drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003)
drm/amd/amdgpu: Fix debugfs error handling
drm/amdgpu: Update gc_9_0 golden settings.
drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields
...
This Kselftest update for Linux 4.20-rc1 consists of:
- Improvements to ftrace test suite from Masami Hiramatsu.
- Color coded ftrace PASS / FAIL results from Steven Rostedt (VMware)
to improve readability of reports.
- watchdog Fixes and enhancement to add gettimeout and get|set pretimeout
options from Jerry Hoemann.
- Several fixes to warnings and spelling etc.
-----BEGIN PGP SIGNATURE-----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=cpOg
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This Kselftest update for Linux 4.20-rc1 consists of:
- Improvements to ftrace test suite from Masami Hiramatsu.
- Color coded ftrace PASS / FAIL results from Steven Rostedt (VMware)
to improve readability of reports.
- watchdog Fixes and enhancement to add gettimeout and get|set
pretimeout options from Jerry Hoemann.
- Several fixes to warnings and spelling etc"
* tag 'linux-kselftest-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (40 commits)
selftests/ftrace: Strip escape sequences for log file
selftests/ftrace: Use colored output when available
selftests: fix warning: "_GNU_SOURCE" redefined
selftests: kvm: Fix -Wformat warnings
selftests/ftrace: Add color to the PASS / FAIL results
kvm: selftests: fix spelling mistake "Insufficent" -> "Insufficient"
selftests: gpio: Fix OUTPUT directory in Makefile
selftests: gpio: restructure Makefile
selftests: watchdog: Fix ioctl SET* error paths to take oneshot exit path
selftests: watchdog: Add gettimeout and get|set pretimeout
selftests: watchdog: Fix error message.
selftests: watchdog: fix message when /dev/watchdog open fails
selftests/ftrace: Add ftrace cpumask testcase
selftests/ftrace: Add wakeup_rt tracer testcase
selftests/ftrace: Add wakeup tracer testcase
selftests/ftrace: Add stacktrace ftrace filter command testcase
selftests/ftrace: Add trace_pipe testcase
selftests/ftrace: Add function filter on module testcase
selftests/ftrace: Add max stack tracer testcase
selftests/ftrace: Add function profiling stat testcase
...
Fix the synthetic event test case to remove event correctly.
If redirecting command to synthetic_event file without append
mode, it cleans up all existing events and execute (parse) the
command. This means "delete event" always fails to find the
target event.
Since previous synthetic event has a bug which doesn't return
-ENOENT even if it fails to find the deleting event, this test
passed. But fixing that bug, this test fails because this test
itself has a bug.
This fixes that bug by trying to delete event right after
adding an event, and use append mode redirection ('>>') instead
of normal redirection ('>').
Link: http://lkml.kernel.org/r/154013452832.25576.2305459545429386517.stgit@devbox
Acked-by: Shuah Khan <shuah@kernel.org>
Acked-by: Tom Zanussi <zanussi@linux.intel.com>
Tested-by: Tom Zanussi <zanussi@linux.intel.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Rajvi Jingar <rajvi.jingar@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: stable@vger.kernel.org
Fixes: f06eec4d0f ('selftests: ftrace: Add inter-event hist triggers testcases')
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull XArray conversion from Matthew Wilcox:
"The XArray provides an improved interface to the radix tree data
structure, providing locking as part of the API, specifying GFP flags
at allocation time, eliminating preloading, less re-walking the tree,
more efficient iterations and not exposing RCU-protected pointers to
its users.
This patch set
1. Introduces the XArray implementation
2. Converts the pagecache to use it
3. Converts memremap to use it
The page cache is the most complex and important user of the radix
tree, so converting it was most important. Converting the memremap
code removes the only other user of the multiorder code, which allows
us to remove the radix tree code that supported it.
I have 40+ followup patches to convert many other users of the radix
tree over to the XArray, but I'd like to get this part in first. The
other conversions haven't been in linux-next and aren't suitable for
applying yet, but you can see them in the xarray-conv branch if you're
interested"
* 'xarray' of git://git.infradead.org/users/willy/linux-dax: (90 commits)
radix tree: Remove multiorder support
radix tree test: Convert multiorder tests to XArray
radix tree tests: Convert item_delete_rcu to XArray
radix tree tests: Convert item_kill_tree to XArray
radix tree tests: Move item_insert_order
radix tree test suite: Remove multiorder benchmarking
radix tree test suite: Remove __item_insert
memremap: Convert to XArray
xarray: Add range store functionality
xarray: Move multiorder_check to in-kernel tests
xarray: Move multiorder_shrink to kernel tests
xarray: Move multiorder account test in-kernel
radix tree test suite: Convert iteration test to XArray
radix tree test suite: Convert tag_tagged_items to XArray
radix tree: Remove radix_tree_clear_tags
radix tree: Remove radix_tree_maybe_preload_order
radix tree: Remove split/join code
radix tree: Remove radix_tree_update_node_t
page cache: Finish XArray conversion
dax: Convert page fault handlers to XArray
...
Daniel Borkmann says:
====================
pull-request: bpf 2018-10-27
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix toctou race in BTF header validation, from Martin and Wenwen.
2) Fix devmap interface comparison in notifier call which was
neglecting netns, from Taehee.
3) Several fixes in various places, for example, correcting direct
packet access and helper function availability, from Daniel.
4) Fix BPF kselftest config fragment to include af_xdp and sockmap,
from Naresh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits)
hugetlbfs: dirty pages as they are added to pagecache
mm: export add_swap_extent()
mm: split SWP_FILE into SWP_ACTIVATED and SWP_FS
tools/testing/selftests/vm/map_fixed_noreplace.c: add test for MAP_FIXED_NOREPLACE
mm: thp: relocate flush_cache_range() in migrate_misplaced_transhuge_page()
mm: thp: fix mmu_notifier in migrate_misplaced_transhuge_page()
mm: thp: fix MADV_DONTNEED vs migrate_misplaced_transhuge_page race condition
mm/kasan/quarantine.c: make quarantine_lock a raw_spinlock_t
mm/gup: cache dev_pagemap while pinning pages
Revert "x86/e820: put !E820_TYPE_RAM regions into memblock.reserved"
mm: return zero_resv_unavail optimization
mm: zero remaining unavailable struct pages
tools/testing/selftests/vm/gup_benchmark.c: add MAP_HUGETLB option
tools/testing/selftests/vm/gup_benchmark.c: add MAP_SHARED option
tools/testing/selftests/vm/gup_benchmark.c: allow user specified file
tools/testing/selftests/vm/gup_benchmark.c: fix 'write' flag usage
mm/gup_benchmark.c: add additional pinning methods
mm/gup_benchmark.c: time put_page()
mm: don't raise MEMCG_OOM event due to failed high-order allocation
mm/page-writeback.c: fix range_cyclic writeback vs writepages deadlock
...
Pull networking fixes from David Miller:
"What better way to start off a weekend than with some networking bug
fixes:
1) net namespace leak in dump filtering code of ipv4 and ipv6, fixed
by David Ahern and Bjørn Mork.
2) Handle bad checksums from hardware when using CHECKSUM_COMPLETE
properly in UDP, from Sean Tranchetti.
3) Remove TCA_OPTIONS from policy validation, it turns out we don't
consistently use nested attributes for this across all packet
schedulers. From David Ahern.
4) Fix SKB corruption in cadence driver, from Tristram Ha.
5) Fix broken WoL handling in r8169 driver, from Heiner Kallweit.
6) Fix OOPS in pneigh_dump_table(), from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (28 commits)
net/neigh: fix NULL deref in pneigh_dump_table()
net: allow traceroute with a specified interface in a vrf
bridge: do not add port to router list when receives query with source 0.0.0.0
net/smc: fix smc_buf_unuse to use the lgr pointer
ipv6/ndisc: Preserve IPv6 control buffer if protocol error handlers are called
net/{ipv4,ipv6}: Do not put target net if input nsid is invalid
lan743x: Remove SPI dependency from Microchip group.
drivers: net: remove <net/busy_poll.h> inclusion when not needed
net: phy: genphy_10g_driver: Avoid NULL pointer dereference
r8169: fix broken Wake-on-LAN from S5 (poweroff)
octeontx2-af: Use GFP_ATOMIC under spin lock
net: ethernet: cadence: fix socket buffer corruption problem
net/ipv6: Allow onlink routes to have a device mismatch if it is the default route
net: sched: Remove TCA_OPTIONS from policy
ice: Poll for link status change
ice: Allocate VF interrupts and set queue map
ice: Introduce ice_dev_onetime_setup
net: hns3: Fix for warning uninitialized symbol hw_err_lst3
octeontx2-af: Copy the right amount of memory
net: udp: fix handling of CHECKSUM_COMPLETE packets
...
Add a test for MAP_FIXED_NOREPLACE, based on some code originally by Jann
Horn. This would have caught the overlap bug reported by Daniel Micay.
I originally suggested to Michal that we create MAP_FIXED_NOREPLACE, but
instead of writing a selftest I spent my time bike-shedding whether it
should be called MAP_FIXED_SAFE/NOCLOBBER/WEAK/NEW .. mea culpa.
Link: http://lkml.kernel.org/r/20181013133929.28653-1-mpe@ellerman.id.au
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jann Horn <jannh@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Jason Evans <jasone@google.com>
Cc: David Goldblatt <davidtgoldblatt@gmail.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a new option '-H' to the gup benchmark to help understand how hugetlb
mapping pages compare with the default.
Link: http://lkml.kernel.org/r/20181010195605.10689-6-keith.busch@intel.com
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a new benchmark option, -S, to request MAP_SHARED. This can be used
to compare with MAP_PRIVATE, or for files that require this option, like
dax.
Link: http://lkml.kernel.org/r/20181010195605.10689-5-keith.busch@intel.com
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow a user to specify a file to map by adding a new option, '-f',
providing a means to test various file backings.
If not specified, the benchmark will use a private mapping of /dev/zero,
which produces an anonymous mapping as before.
[akpm@linux-foundation.org: avoid using comma operator]
Link: http://lkml.kernel.org/r/20181010195605.10689-4-keith.busch@intel.com
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the '-w' parameter was provided, the benchmark would exit due to a
mssing 'break'.
Link: http://lkml.kernel.org/r/20181010195605.10689-3-keith.busch@intel.com
Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide new gup benchmark ioctl commands to run different user page
pinning methods, get_user_pages_longterm() and get_user_pages(), in
addition to the existing get_user_pages_fast().
Link: http://lkml.kernel.org/r/20181010195605.10689-2-keith.busch@intel.com
Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We'd like to measure time to unpin user pages, so this adds a second
benchmark timer on put_page, separate from get_page.
Adding the field breaks this ioctl ABI, but should be okay since this an
in-tree kernel selftest.
[akpm@linux-foundation.org: add expansion to struct gup_benchmark for future use]
Link: http://lkml.kernel.org/r/20181010195605.10689-1-keith.busch@intel.com
Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now we recycle the uffd servicing threads earlier than the lock threads.
It might happen that when the lock thread is still blocked at a pthread
mutex lock while the servicing thread has already quitted for the cpu so
the lock thread will be blocked forever and hang the test program. To fix
the possible race, recycle the lock threads first.
This never happens with current missing-only tests, but when I start to
run the write-protection tests (the feature is not yet posted upstream) it
happens every time of the run possibly because in that new test we'll need
to service two page faults for each lock operation.
Link: http://lkml.kernel.org/r/20180930074259.18229-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Shaohua Li <shli@fb.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We do very similar things in read and poll modes, but we're copying the
codes around. Share the codes properly on reading the message and
handling the page fault to make the code cleaner. Meanwhile this solves
previous mismatch of behaviors between the two modes on that the old code:
- did not check EAGAIN case in read() mode
- ignored BOUNCE_VERIFY check in read() mode
Link: http://lkml.kernel.org/r/20180930074259.18229-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Shaohua Li <shli@fb.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Firstly, the help in the comment region is obsolete, now we support
three parameters. Since at it, change it and move it into the help
message of the program.
Also, the help messages dumped here and there is obsolete too. Use a
single usage() helper.
Link: http://lkml.kernel.org/r/20180930074259.18229-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Shaohua Li <shli@fb.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Delay accounting already measures the time a task spends in direct reclaim
and waiting for swapin, but in low memory situations tasks spend can spend
a significant amount of their time waiting on thrashing page cache. This
isn't tracked right now.
To know the full impact of memory contention on an individual task,
measure the delay when waiting for a recently evicted active cache page to
read back into memory.
Also update tools/accounting/getdelays.c:
[hannes@computer accounting]$ sudo ./getdelays -d -p 1
print delayacct stats ON
PID 1
CPU count real total virtual total delay total delay average
50318 745000000 847346785 400533713 0.008ms
IO count delay total delay average
435 122601218 0ms
SWAP count delay total delay average
0 0 0ms
RECLAIM count delay total delay average
0 0 0ms
THRASHING count delay total delay average
19 12621439 0ms
Link: http://lkml.kernel.org/r/20180828172258.3185-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Notable changes:
- A large series to rewrite our SLB miss handling, replacing a lot of fairly
complicated asm with much fewer lines of C.
- Following on from that, we now maintain a cache of SLB entries for each
process and preload them on context switch. Leading to a 27% speedup for our
context switch benchmark on Power9.
- Improvements to our handling of SLB multi-hit errors. We now print more debug
information when they occur, and try to continue running by flushing the SLB
and reloading, rather than treating them as fatal.
- Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9).
- Add support for physical memory up to 2PB in the linear mapping on 64-bit
Book3S. We only support up to 512TB as regular system memory, otherwise the
percpu allocator runs out of vmalloc space.
- Add stack protector support for 32 and 64-bit, with a per-task canary.
- Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.
- Support recognising "big cores" on Power9, where two SMT4 cores are presented
to us as a single SMT8 core.
- A large series to cleanup some of our ioremap handling and PTE flags.
- Add a driver for the PAPR SCM (storage class memory) interface, allowing
guests to operate on SCM devices (acked by Dan).
- Changes to our ftrace code to handle very large kernels, where we need to use
a trampoline to get to ftrace_caller().
Many other smaller enhancements and cleanups.
Thanks to:
Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton Blanchard, Aravinda
Prasad, Bartlomiej Zolnierkiewicz, Benjamin Herrenschmidt, Breno Leitao,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Dan Carpenter, Daniel
Axtens, Finn Thain, Gautham R. Shenoy, Gustavo Romero, Haren Myneni, Hari
Bathini, Jia Hongtao, Joel Stanley, John Allen, Laurent Dufour, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael
Bringmann, Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan
Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran,
Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab, Rob Herring, Sam
Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan Johnson, Stephen Rothwell,
Stewart Smith, Suraj Jitindar Singh, Tyrel Datwyler, Vaibhav Jain, Vasant
Hegde, YueHaibing, zhong jiang,
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJb01vTAAoJEFHr6jzI4aWADsEP/jqL3+2qxs098ra80tpXCpXJ
tgXCosEs4b35sGtyHeUWZZZfWXeisaPAIlP8zTx1n50HACZduDYRAl0Ew9XB7Xdw
enDHRVccD21FsmHBOx/Ii1rVJlovWlj6EQCWHKeZmNjeRoFuClVZ7CYmf+mBifKR
sw2Db2fKA/59wMTq2zIMy5pqYgqlAs4jTWS6uN5hKPoBmO/82ARnNG+qgLuloD3Z
O8zSDM9QQ7PpuyDgTjO9SAo2YjmEfXlEG6cOCCejsU3DMctaEAK5PUZ+blsHYHBH
BYZYKs/x4pcw0SO41GtTh0M2YqDYBVuBIpRw8lLZap97Xo9ucSkAm5WD3rGxk4CY
YeZKEPUql6MHN3+DKl8mx2F0V+Et/tio2HNqc9KReR1tfoolZAbe+SFZHfgmc/Rq
RD9nnG8KRd4K2K1BTqpkTmI1EtE7jPtPJPSV8gMGhgL/N5vPmH3mql/qyOtYx48E
6/hPzWESgs16VRZ/opLh8VvjlY1HBDODQhehhhl+o23/Vb8qEgRf8Uqhq50rQW1H
EeOqyyYQ90txSU31Sgy1kQkvOgIFAsBObWT1ZCJ3RbfGbB4/tdEAvZqTZRlXo2OY
7P0Sqcw/9Le5eJkHIlLtBv0TF7y1OYemCbLgRQzFlcRP+UKtYyg8eFnFjqbPEEmP
ulwhn/BfFVSgaYKQ503u
=I0pj
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- A large series to rewrite our SLB miss handling, replacing a lot of
fairly complicated asm with much fewer lines of C.
- Following on from that, we now maintain a cache of SLB entries for
each process and preload them on context switch. Leading to a 27%
speedup for our context switch benchmark on Power9.
- Improvements to our handling of SLB multi-hit errors. We now print
more debug information when they occur, and try to continue running
by flushing the SLB and reloading, rather than treating them as
fatal.
- Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9).
- Add support for physical memory up to 2PB in the linear mapping on
64-bit Book3S. We only support up to 512TB as regular system
memory, otherwise the percpu allocator runs out of vmalloc space.
- Add stack protector support for 32 and 64-bit, with a per-task
canary.
- Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.
- Support recognising "big cores" on Power9, where two SMT4 cores are
presented to us as a single SMT8 core.
- A large series to cleanup some of our ioremap handling and PTE
flags.
- Add a driver for the PAPR SCM (storage class memory) interface,
allowing guests to operate on SCM devices (acked by Dan).
- Changes to our ftrace code to handle very large kernels, where we
need to use a trampoline to get to ftrace_caller().
And many other smaller enhancements and cleanups.
Thanks to: Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton
Blanchard, Aravinda Prasad, Bartlomiej Zolnierkiewicz, Benjamin
Herrenschmidt, Breno Leitao, Cédric Le Goater, Christophe Leroy,
Christophe Lombard, Dan Carpenter, Daniel Axtens, Finn Thain, Gautham
R. Shenoy, Gustavo Romero, Haren Myneni, Hari Bathini, Jia Hongtao,
Joel Stanley, John Allen, Laurent Dufour, Madhavan Srinivasan, Mahesh
Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael Bringmann,
Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan
Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver
O'Halloran, Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab,
Rob Herring, Sam Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan
Johnson, Stephen Rothwell, Stewart Smith, Suraj Jitindar Singh, Tyrel
Datwyler, Vaibhav Jain, Vasant Hegde, YueHaibing, zhong jiang"
* tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (221 commits)
Revert "selftests/powerpc: Fix out-of-tree build errors"
powerpc/msi: Fix compile error on mpc83xx
powerpc: Fix stack protector crashes on CPU hotplug
powerpc/traps: restore recoverability of machine_check interrupts
powerpc/64/module: REL32 relocation range check
powerpc/64s/radix: Fix radix__flush_tlb_collapsed_pmd double flushing pmd
selftests/powerpc: Add a test of wild bctr
powerpc/mm: Fix page table dump to work on Radix
powerpc/mm/radix: Display if mappings are exec or not
powerpc/mm/radix: Simplify split mapping logic
powerpc/mm/radix: Remove the retry in the split mapping logic
powerpc/mm/radix: Fix small page at boundary when splitting
powerpc/mm/radix: Fix overuse of small pages in splitting logic
powerpc/mm/radix: Fix off-by-one in split mapping logic
powerpc/ftrace: Handle large kernel configs
powerpc/mm: Fix WARN_ON with THP NUMA migration
selftests/powerpc: Fix out-of-tree build errors
powerpc/time: no steal_time when CONFIG_PPC_SPLPAR is not selected
powerpc/time: Only set CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC64
powerpc/time: isolate scaled cputime accounting in dedicated functions.
...
Here is the big USB/PHY driver patches for 4.20-rc1
Lots of USB changes in here, primarily in these areas:
- typec updates and new drivers
- new PHY drivers
- dwc2 driver updates and additions (this old core keeps getting added
to new devices.)
- usbtmc major update based on the industry group coming together and
working to add new features and performance to the driver.
- USB gadget additions for new features
- USB gadget configfs updates
- chipidea driver updates
- other USB gadget updates
- USB serial driver updates
- renesas driver updates
- xhci driver updates
- other tiny USB driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW9LlHw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymnvwCffYmMWyMG9zSOw1oSzFPl7TVN1hYAoMyJqzLg
umyLwWxC9ZWWkrpc3iD8
=ux+Y
-----END PGP SIGNATURE-----
Merge tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big USB/PHY driver patches for 4.20-rc1
Lots of USB changes in here, primarily in these areas:
- typec updates and new drivers
- new PHY drivers
- dwc2 driver updates and additions (this old core keeps getting
added to new devices.)
- usbtmc major update based on the industry group coming together and
working to add new features and performance to the driver.
- USB gadget additions for new features
- USB gadget configfs updates
- chipidea driver updates
- other USB gadget updates
- USB serial driver updates
- renesas driver updates
- xhci driver updates
- other tiny USB driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits)
usb: phy: ab8500: silence some uninitialized variable warnings
usb: xhci: tegra: Add genpd support
usb: xhci: tegra: Power-off power-domains on removal
usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten
usbip: tools: fix atoi() on non-null terminated string
USB: misc: appledisplay: fix backlight update_status return code
phy: phy-pxa-usb: add a new driver
usb: host: add DT bindings for faraday fotg2
usb: host: ohci-at91: fix request of irq for optional gpio
usb/early: remove set but not used variable 'remain_length'
usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc
usb: typec: tcpm: Report back negotiated PPS voltage and current
USB: core: remove set but not used variable 'udev'
usb: core: fix memory leak on port_dev_path allocation
USB: net2280: Remove ->disconnect() callback from net2280_pullup()
usb: dwc2: disable power_down on rockchip devices
usb: gadget: udc: renesas_usb3: add support for r8a77990
dt-bindings: usb: renesas_usb3: add bindings for r8a77990
usb: gadget: udc: renesas_usb3: Add r8a774a1 support
USB: serial: cypress_m8: remove set but not used variable 'iflag'
...
Test ptrace-tm-spd-gpr fails on current kernel (4.19) due to a segmentation
fault that happens on the child process prior to setting cptr[2] = 1. This
causes the parent process to wait forever at 'while (!pptr[2])' and the test to
be killed by the test harness framework by timeout, thus, failing.
The segmentation fault happens because of a inline assembly being
generated as:
0x10000355c <tm_spd_gpr+492> lfs f0, 0(0)
This is reading memory position 0x0 and causing the segmentation fault.
This code is being generated by ASM_LOAD_FPR_SINGLE_PRECISION(flt_4), where
flt_4 is passed to the inline assembly block as:
[flt_4] "r" (&d)
Since the inline assembly 'r' constraint means any GPR, gpr0 is being
chosen, thus causing this issue when issuing a Load Floating-Point Single
instruction.
This patch simply changes the constraint to 'b', which specify that this
register will be used as base, and r0 is not allowed to be used, avoiding
this issue.
Other than that, removing flt_2 register from the input operands, since it
is not used by the inline assembly code at all.
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- Introduce 'perf trace --max-events' for stopping 'perf trace' when
that many syscalls (enter+exit), tracepoints or other events such as
page faults take place.
Support that as well on a per-event basis, e.g.:
perf trace -e sched:*switch/nr=2/,block:*_plug/nr=4/,block:*_unplug/nr=1/,net:*dev_queue/nr=3,max-stack=16/
Will stop when 2 context switches, 4 block plugs, 1 block unplug and
3 net_dev_queue tracepoints take place. (Arnaldo Carvalho de Melo)
- Poll for monitored tasks being alive in 'perf stat -p/-t', exiting when
those tasks all terminate (Jiri Olsa)
- Encode -k clockid frequency into perf.data to enable timestamps derived
metrics conversion into wall clock time on reporting stage. (Alexey Budankov)
- Improve Intel PT call graph from SQL database and GUI python scripts,
including adopting the Qt MDI interface to allow for multiple subwindows
for all the tables, helping in better visualizing the data in the SQL
tables, also uses, when available, the Intel XED disassembler libraries
to present the Intel PT data as x86 asm mnemonics. This last feature
is not currently working in some cases, fix is being discussed (Adrian Hunter)
- Implement a ftrace function_graph view in 'perf script' when processing
hardware trace data such as Intel PT (Andi Kleen)
- Better integration with the Intel XED disassembler, when available, in
'perf script' (Andi Kleen)
- Some 'perf trace' drop refcount fixes (Arnaldo Carvalho de Melo)
- Add Sparc support to 'perf annotate', jitdump (David Miller)
- Fix PLT symbols entry/header sizes properly on Sparc (David Miller)
- Fix generation of system call table failure with /tmp mounted with 'noexec'
in arm64 (Hongxu Jia)
- Allow extended console debug output in 'perf script' (Milian Wolff)
- Flush output stream after events in 'perf script' verbose mode (Milian Wolff)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCW9Gj1gAKCRCyPKLppCJ+
J/YFAQCTlCJPJBET/edCj0XLre68j/nuiHQKR8ey7qDDKr+HtQEAilKQhn6vNDae
xRwAGywC4/dGkkkffMMKdqxWFQ/JUwg=
=8UYP
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.20-20181025' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Introduce 'perf trace --max-events' for stopping 'perf trace' when
that many syscalls (enter+exit), tracepoints or other events such as
page faults take place.
Support that as well on a per-event basis, e.g.:
perf trace -e sched:*switch/nr=2/,block:*_plug/nr=4/,block:*_unplug/nr=1/,net:*dev_queue/nr=3,max-stack=16/
Will stop when 2 context switches, 4 block plugs, 1 block unplug and
3 net_dev_queue tracepoints take place. (Arnaldo Carvalho de Melo)
- Poll for monitored tasks being alive in 'perf stat -p/-t', exiting when
those tasks all terminate (Jiri Olsa)
- Encode -k clockid frequency into perf.data to enable timestamps derived
metrics conversion into wall clock time on reporting stage. (Alexey Budankov)
- Improve Intel PT call graph from SQL database and GUI python scripts,
including adopting the Qt MDI interface to allow for multiple subwindows
for all the tables, helping in better visualizing the data in the SQL
tables, also uses, when available, the Intel XED disassembler libraries
to present the Intel PT data as x86 asm mnemonics. This last feature
is not currently working in some cases, fix is being discussed (Adrian Hunter)
- Implement a ftrace function_graph view in 'perf script' when processing
hardware trace data such as Intel PT (Andi Kleen)
- Better integration with the Intel XED disassembler, when available, in
'perf script' (Andi Kleen)
- Some 'perf trace' drop refcount fixes (Arnaldo Carvalho de Melo)
- Add Sparc support to 'perf annotate', jitdump (David Miller)
- Fix PLT symbols entry/header sizes properly on Sparc (David Miller)
- Fix generation of system call table failure with /tmp mounted with 'noexec'
in arm64 (Hongxu Jia)
- Allow extended console debug output in 'perf script' (Milian Wolff)
- Flush output stream after events in 'perf script' verbose mode (Milian Wolff)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
ARM:
- Improved guest IPA space support (32 to 52 bits)
- RAS event delivery for 32bit
- PMU fixes
- Guest entry hardening
- Various cleanups
- Port of dirty_log_test selftest
PPC:
- Nested HV KVM support for radix guests on POWER9. The performance is
much better than with PR KVM. Migration and arbitrary level of
nesting is supported.
- Disable nested HV-KVM on early POWER9 chips that need a particular hardware
bug workaround
- One VM per core mode to prevent potential data leaks
- PCI pass-through optimization
- merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base
s390:
- Initial version of AP crypto virtualization via vfio-mdev
- Improvement for vfio-ap
- Set the host program identifier
- Optimize page table locking
x86:
- Enable nested virtualization by default
- Implement Hyper-V IPI hypercalls
- Improve #PF and #DB handling
- Allow guests to use Enlightened VMCS
- Add migration selftests for VMCS and Enlightened VMCS
- Allow coalesced PIO accesses
- Add an option to perform nested VMCS host state consistency check
through hardware
- Automatic tuning of lapic_timer_advance_ns
- Many fixes, minor improvements, and cleanups
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJb0FINAAoJEED/6hsPKofoI60IAJRS3vOAQ9Fav8cJsO1oBHcX
3+NexfnBke1bzrjIR3SUcHKGZbdnVPNZc+Q4JjIbPpPmmOMU5jc9BC1dmd5f4Vzh
BMnQ0yCvgFv3A3fy/Icx1Z8NJppxosdmqdQLrQrNo8aD3cjnqY2yQixdXrAfzLzw
XEgKdIFCCz8oVN/C9TT4wwJn6l9OE7BM5bMKGFy5VNXzMu7t64UDOLbbjZxNgi1g
teYvfVGdt5mH0N7b2GPPWRbJmgnz5ygVVpVNQUEFrdKZoCm6r5u9d19N+RRXAwan
ZYFj10W2T8pJOUf3tryev4V33X7MRQitfJBo4tP5hZfi9uRX89np5zP1CFE7AtY=
=yEPW
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"ARM:
- Improved guest IPA space support (32 to 52 bits)
- RAS event delivery for 32bit
- PMU fixes
- Guest entry hardening
- Various cleanups
- Port of dirty_log_test selftest
PPC:
- Nested HV KVM support for radix guests on POWER9. The performance
is much better than with PR KVM. Migration and arbitrary level of
nesting is supported.
- Disable nested HV-KVM on early POWER9 chips that need a particular
hardware bug workaround
- One VM per core mode to prevent potential data leaks
- PCI pass-through optimization
- merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base
s390:
- Initial version of AP crypto virtualization via vfio-mdev
- Improvement for vfio-ap
- Set the host program identifier
- Optimize page table locking
x86:
- Enable nested virtualization by default
- Implement Hyper-V IPI hypercalls
- Improve #PF and #DB handling
- Allow guests to use Enlightened VMCS
- Add migration selftests for VMCS and Enlightened VMCS
- Allow coalesced PIO accesses
- Add an option to perform nested VMCS host state consistency check
through hardware
- Automatic tuning of lapic_timer_advance_ns
- Many fixes, minor improvements, and cleanups"
* tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
KVM/nVMX: Do not validate that posted_intr_desc_addr is page aligned
Revert "kvm: x86: optimize dr6 restore"
KVM: PPC: Optimize clearing TCEs for sparse tables
x86/kvm/nVMX: tweak shadow fields
selftests/kvm: add missing executables to .gitignore
KVM: arm64: Safety check PSTATE when entering guest and handle IL
KVM: PPC: Book3S HV: Don't use streamlined entry path on early POWER9 chips
arm/arm64: KVM: Enable 32 bits kvm vcpu events support
arm/arm64: KVM: Rename function kvm_arch_dev_ioctl_check_extension()
KVM: arm64: Fix caching of host MDCR_EL2 value
KVM: VMX: enable nested virtualization by default
KVM/x86: Use 32bit xor to clear registers in svm.c
kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD
kvm: vmx: Defer setting of DR6 until #DB delivery
kvm: x86: Defer setting of CR2 until #PF delivery
kvm: x86: Add payload operands to kvm_multiple_exception
kvm: x86: Add exception payload fields to kvm_vcpu_events
kvm: x86: Add has_payload and payload to kvm_queued_exception
KVM: Documentation: Fix omission in struct kvm_vcpu_events
KVM: selftests: add Enlightened VMCS test
...
Commit b39b5f411d ("bpf: add cg_skb_is_valid_access for
BPF_PROG_TYPE_CGROUP_SKB") added support for returning pkt pointers
for direct packet access. Given this program type is allowed for both
unprivileged and privileged users, we shouldn't allow unprivileged
ones to use it, e.g. besides others one reason would be to avoid any
potential speculation on the packet test itself, thus guard this for
root only.
Fixes: b39b5f411d ("bpf: add cg_skb_is_valid_access for BPF_PROG_TYPE_CGROUP_SKB")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Given BPF_PROG_TYPE_CGROUP_SKB program types are also valid in an
unprivileged setting, lets not omit these tests and potentially
have issues fall through the cracks. Make this more obvious by
adding a small test_as_unpriv() helper.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF sockmap and hashmap are dependent on CONFIG_BPF_STREAM_PARSER and
xskmap is dependent on CONFIG_XDP_SOCKETS
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----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=58I4
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- Fix ASPM link_state teardown on removal (Lukas Wunner)
- Fix misleading _OSC ASPM message (Sinan Kaya)
- Make _OSC optional for PCI (Sinan Kaya)
- Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
(Patrick Talbert)
- Remove x86 and arm64 node-local allocation for host bridge structures
(Punit Agrawal)
- Pay attention to device-specific _PXM node values (Jonathan Cameron)
- Support new Immediate Readiness bit (Felipe Balbi)
- Differentiate between pciehp surprise and safe removal (Lukas Wunner)
- Remove unnecessary pciehp includes (Lukas Wunner)
- Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)
- Tolerate PCIe Slot Presence Detect being hardwired to zero to
workaround broken hardware, e.g., the Wilocity switch/wireless device
(Lukas Wunner)
- Unify pciehp controller & slot structs (Lukas Wunner)
- Constify hotplug_slot_ops (Lukas Wunner)
- Drop hotplug_slot_info (Lukas Wunner)
- Embed hotplug_slot struct into users instead of allocating it
separately (Lukas Wunner)
- Initialize PCIe port service drivers directly instead of relying on
initcall ordering (Keith Busch)
- Restore PCI config state after a slot reset (Keith Busch)
- Save/restore DPC config state along with other PCI config state
(Keith Busch)
- Reference count devices during AER handling to avoid race issue with
concurrent hot removal (Keith Busch)
- If an Upstream Port reports ERR_FATAL, don't try to read the Port's
config space because it is probably unreachable (Keith Busch)
- During error handling, use slot-specific reset instead of secondary
bus reset to avoid link up/down issues on hotplug ports (Keith Busch)
- Restore previous AER/DPC handling that does not remove and
re-enumerate devices on ERR_FATAL (Keith Busch)
- Notify all drivers that may be affected by error recovery resets
(Keith Busch)
- Always generate error recovery uevents, even if a driver doesn't have
error callbacks (Keith Busch)
- Make PCIe link active reporting detection generic (Keith Busch)
- Support D3cold in PCIe hierarchies during system sleep and runtime,
including hotplug and Thunderbolt ports (Mika Westerberg)
- Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
are empty or occupied (Jon Derrick)
- Remove duplicated include from pci/pcie/err.c and unused variable
from cpqphp (YueHaibing)
- Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
Pawandeep)
- Uninline PCI bus accessors for better ftracing (Keith Busch)
- Remove unused AER Root Port .error_resume method (Keith Busch)
- Use kfifo in AER instead of a local version (Keith Busch)
- Use threaded IRQ in AER bottom half (Keith Busch)
- Use managed resources in AER core (Keith Busch)
- Reuse pcie_port_find_device() for AER injection (Keith Busch)
- Abstract AER interrupt handling to disconnect error injection (Keith
Busch)
- Refactor AER injection callbacks to simplify future improvments
(Keith Busch)
- Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)
- Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)
- Add switch fall-through annotations (Gustavo A. R. Silva)
- Remove unused Switchtec quirk variable (Joshua Abraham)
- Fix pci.c kernel-doc warning (Randy Dunlap)
- Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)
- Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)
- Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
useless dmesg errors (Logan Gunthorpe)
- Update Switchtec NTB documentation (Wesley Yung)
- Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)
- Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)
- Add PCI support for peer-to-peer DMA (Logan Gunthorpe)
- Add sysfs group for PCI peer-to-peer memory statistics (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
Gunthorpe)
- Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA driver writer's documentation (Logan
Gunthorpe)
- Add block layer flag to indicate driver support for PCI peer-to-peer
DMA (Logan Gunthorpe)
- Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
memory (Logan Gunthorpe)
- Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
Gunthorpe)
- Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
Gunthorpe)
- Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
Christoph Hellwig, Logan Gunthorpe)
- Cache VF config space size to optimize enumeration of many VFs
(KarimAllah Ahmed)
- Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)
- Fix VMD AERSID quirk Device ID matching (Jon Derrick)
- Fix Cadence PHY handling during probe (Alan Douglas)
- Signal Cadence Endpoint interrupts via AXI region 0 instead of last
region (Alan Douglas)
- Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
Douglas)
- Remove redundant controller tests for "device_type == pci" (Rob
Herring)
- Document R-Car E3 (R8A77990) bindings (Tho Vu)
- Add device tree support for R-Car r8a7744 (Biju Das)
- Drop unused mvebu PCIe capability code (Thomas Petazzoni)
- Add shared PCI bridge emulation code (Thomas Petazzoni)
- Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)
- Add aardvark Root Port emulation (Thomas Petazzoni)
- Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)
- Add initial power management for i.MX7 (Leonard Crestez)
- Add PME_Turn_Off support for i.MX7 (Leonard Crestez)
- Fix qcom runtime power management error handling (Bjorn Andersson)
- Update TI dra7xx unaligned access errata workaround for host mode as
well as endpoint mode (Vignesh R)
- Fix kirin section mismatch warning (Nathan Chancellor)
- Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)
- Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)
- Update Keystone to use MRRS quirk for host bridge instead of open
coding (Kishon Vijay Abraham I)
- Refactor Keystone link establishment (Kishon Vijay Abraham I)
- Simplify and speed up Keystone link training (Kishon Vijay Abraham I)
- Remove unused Keystone host_init argument (Kishon Vijay Abraham I)
- Merge Keystone driver files into one (Kishon Vijay Abraham I)
- Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
Abraham I)
- Rename Keystone functions for uniformity (Kishon Vijay Abraham I)
- Add Keystone device control module DT binding (Kishon Vijay Abraham
I)
- Use SYSCON API to get Keystone control module device IDs (Kishon
Vijay Abraham I)
- Clean up Keystone PHY handling (Kishon Vijay Abraham I)
- Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)
- Clean up Keystone config space access checks (Kishon Vijay Abraham I)
- Get Keystone outbound window count from DT (Kishon Vijay Abraham I)
- Clean up Keystone outbound window configuration (Kishon Vijay Abraham
I)
- Clean up Keystone DBI setup (Kishon Vijay Abraham I)
- Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)
- Fix Keystone IRQ status checking (Kishon Vijay Abraham I)
- Add debug messages for all Keystone errors (Kishon Vijay Abraham I)
- Clean up Keystone includes and macros (Kishon Vijay Abraham I)
- Fix Mediatek unchecked return value from devm_pci_remap_iospace()
(Gustavo A. R. Silva)
- Fix Mediatek endpoint/port matching logic (Honghui Zhang)
- Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
Zhang)
- Remove redundant Mediatek PM domain check (Honghui Zhang)
- Convert Mediatek to pci_host_probe() (Honghui Zhang)
- Fix Mediatek MSI enablement (Honghui Zhang)
- Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)
- Add Mediatek loadable module support (Honghui Zhang)
- Detach VMD resources after stopping root bus to prevent orphan
resources (Jon Derrick)
- Convert pcitest build process to that used by other tools (iio, perf,
etc) (Gustavo Pimentel)
* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI/AER: Refactor error injection fallbacks
PCI/AER: Abstract AER interrupt handling
PCI/AER: Reuse existing pcie_port_find_device() interface
PCI/AER: Use managed resource allocations
PCI: pcie: Remove redundant 'default n' from Kconfig
PCI: aardvark: Implement emulated root PCI bridge config space
PCI: mvebu: Convert to PCI emulated bridge config space
PCI: mvebu: Drop unused PCI express capability code
PCI: Introduce PCI bridge emulated config space common logic
PCI: vmd: Detach resources after stopping root bus
nvmet: Optionally use PCI P2P memory
nvmet: Introduce helper functions to allocate and free request SGLs
nvme-pci: Add support for P2P memory in requests
nvme-pci: Use PCI p2pmem subsystem to manage the CMB
IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
block: Add PCI P2P flag for request queue
PCI/P2PDMA: Add P2P DMA driver writer's documentation
docs-rst: Add a new directory for PCI documentation
PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
...
* Improve the efficiency and performance of reading nvdimm-namespace
labels. Reduce the amount of label data read at driver load time by a
few orders of magnitude. Reduce heavyweight call-outs to
platform-firmware routines.
* Handle media errors located in the 'struct page' array stored on a
persistent memory namespace. Let the kernel clear these errors rather
than an awkward userspace workaround.
* Fix Address Range Scrub (ARS) completion tracking. Correct occasions
where the kernel indicates completion of ARS before submission.
* Fix asynchronous device registration reference counting.
* Add support for reporting an nvdimm dirty-shutdown-count via sysfs.
* Fix various small libnvdimm core and uapi issues.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJb0NuwAAoJEB7SkWpmfYgCjUYP/1RK35zXBJSArGE3CUkap/zp
exuqUzhisiE3RER13hNvC59AxXB9QuIbzuR5bzWm+Lawuuaozn3iL2oKn3Gy0inl
yE3m/1Hx43FTkYdH86K9bpaXtRfymppJiR475jRFin17xWL3UP2JJgYtGwoRfO4p
OL1aLcGo04Y1E2h6sVx97DjiwWN5uTaG9jCciZr2w+s5pg1seuEOJcAayp+6D0Tq
i2hZvQ6nyxxF2WzGqRk3ABbRySpQ5o4b33I/jjOKEFwYoB8UiZQeLuL2WRr1ztfz
jo+aalLJjZTOMgeWPIYSuV+U8vySVUwXpMhfrMGnIRm5BuE9JUlHrYkMLcLZJyei
2qgQ65mDmoViBVx0w5k2nUjP8Ju5lC7fZTaLU60vf+3FZvBbSTtmog2+P0xMLg17
AHebl9slzJPO4r/z4XY+n9Bk/qOz6sfWk07LugfNcMdeZriJKr7BUclZVZDYiPJA
/Rtnd8XRu8hS5Kfj7wK2QD5sVklS5VQhho/zzBZHQcQkQBfRo6f6YQ83N/6yoTKD
p6nel3uRMX2n8+EPyODYt9j0cF7JupWqlSpRKUORrdSz85gt4D6W578tkJCEOCm0
JOm5HdLlwIhlIcam/w0blLOr+a0sISS4cWR72Vc/lSZHoM8ouQiQC/lplpiAAWwI
7pSmlYEEbZRQCy6ZrlVy
=0FtE
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
- Improve the efficiency and performance of reading nvdimm-namespace
labels. Reduce the amount of label data read at driver load time by a
few orders of magnitude. Reduce heavyweight call-outs to
platform-firmware routines.
- Handle media errors located in the 'struct page' array stored on a
persistent memory namespace. Let the kernel clear these errors rather
than an awkward userspace workaround.
- Fix Address Range Scrub (ARS) completion tracking. Correct occasions
where the kernel indicates completion of ARS before submission.
- Fix asynchronous device registration reference counting.
- Add support for reporting an nvdimm dirty-shutdown-count via sysfs.
- Fix various small libnvdimm core and uapi issues.
* tag 'libnvdimm-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
acpi, nfit: Further restrict userspace ARS start requests
acpi, nfit: Fix Address Range Scrub completion tracking
UAPI: ndctl: Remove use of PAGE_SIZE
UAPI: ndctl: Fix g++-unsupported initialisation in headers
tools/testing/nvdimm: Populate dirty shutdown data
acpi, nfit: Collect shutdown status
acpi, nfit: Introduce nfit_mem flags
libnvdimm, label: Fix sparse warning
nvdimm: Use namespace index data to reduce number of label reads needed
nvdimm: Split label init out from the logic for getting config data
nvdimm: Remove empty if statement
nvdimm: Clarify comment in sizeof_namespace_index
nvdimm: Sanity check labeloff
libnvdimm, dimm: Maximize label transfer size
libnvdimm, pmem: Fix badblocks population for 'raw' namespaces
libnvdimm, namespace: Drop the repeat assignment for variable dev->parent
libnvdimm, region: Fail badblocks listing for inactive regions
libnvdimm, pfn: during init, clear errors in the metadata area
libnvdimm: Set device node in nd_device_register
libnvdimm: Hold reference on parent while scheduling async init
...
The intent of ip6_route_check_nh_onlink is to make sure the gateway
given for an onlink route is not actually on a connected route for
a different interface (e.g., 2001:db8:1::/64 is on dev eth1 and then
an onlink route has a via 2001:db8:1::1 dev eth2). If the gateway
lookup hits the default route then it most likely will be a different
interface than the onlink route which is ok.
Update ip6_route_check_nh_onlink to disregard the device mismatch
if the gateway lookup hits the default route. Turns out the existing
onlink tests are passing because there is no default route or it is
an unreachable default, so update the onlink tests to have a default
route other than unreachable.
Fixes: fc1e64e109 ("net/ipv6: Add support for onlink flag")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Strip escape sequences from the stream to the ftracetest
summary log file. Note that all test-case results are
dumped raw in each file.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
If test is being directly executed (with stdout opened on the
terminal) and the terminal capabilities indicate enough
colors, then use the existing scheme of green, red, and blue
to show when tests pass, fail or end in a different way.
When running the tests redirecting the stdout, for instance,
to a file, then colors are not shown, thus producing a more
readable output.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Fixes the following warnings:
dirty_log_test.c: In function ‘help’:
dirty_log_test.c:216:9: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat=]
printf(" -i: specify iteration counts (default: %"PRIu64")\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from include/test_util.h:18:0,
from dirty_log_test.c:16:
/usr/include/inttypes.h:105:34: note: format string is defined here
# define PRIu64 __PRI64_PREFIX "u"
dirty_log_test.c:218:9: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat=]
printf(" -I: specify interval in ms (default: %"PRIu64" ms)\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from include/test_util.h:18:0,
from dirty_log_test.c:16:
/usr/include/inttypes.h:105:34: note: format string is defined here
# define PRIu64 __PRI64_PREFIX "u"
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Now that ftracetest has over 80 tests, it is difficult to simply scroll
up the console window to find the failed tests when it reports just two
tests have failed. In order to make this stand out better, have the
color of the word "PASS" be green, "FAIL" and "XFAIL" be red, and all
other results be blue. This helps tremendously in quickly spotting the
failed tests by just scrolling up the console window.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Trivial fix to spelling mistake in TEST_ASSERT message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When simply running `make' from the selftests top dir, this
error shows up:
cc -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/uuid gpio-mockup-chardev.c ../../../gpio/gpio-utils.o -lmount -o gpio-mockup-chardev
cc: error: ../../../gpio/gpio-utils.o: No such file or directory
<builtin>: recipe for target 'gpio-mockup-chardev' failed
make[1]: *** [gpio-mockup-chardev] Error 1
because the output directory is set to "selftests/gpio" and
all binaries built from ../../../gpio/ end up there. In fact,
they appear as, exempli gratia:
* gpiogpio-event-mon
* gpiogpio-hammer
* gpioinclude/
* gpiolsgpio
which is wrong, as it's missing a directory separator
somewhere.
This patch sets straight the output directory when building
../../../gpio/ so that binaries don't cross paths.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
This patch cleans up the Makefile by restructuring a couple of
things, namely:
1) change explicit paths in targets for variables
2) substitute a variable (BINARIES) for another, part of the
selftests build system (TEST_PROGS_EXTENDED)
3) proper cleaning up of the EXTRA objects
The resulting Makefile is much more readable and manageable.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When ioctls for WDIOC_SETOPTIONS (WDIOS_DISABLECARD or WDIOS_ENABLECARD),
WDIOC_SETTIMEOUT, and WDIOC_SETPRETIMEOUT fail, the error path continues
to handler watchdog timer until user terminates it. When ioctl returns
error, it might not be safe to let the watchdog tick. The error could be
due an unsupported ioctl command or some other error.
Fix it to handle error paths as oneshot to stop the watchdog ticks and
exit right away.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Printf's say errno but print the string version of error.
Make consistent.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When /dev/watchdog open fails, watchdog exits with "watchdog not enabled"
message. This is incorrect when open fails due to insufficient privilege.
Fix message to clearly state the reason when open fails with EACCESS when
a non-root user runs it.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a testcase for tracing_cpumask with function tracer.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a test case for stacktrace filter command for ftrace.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a simple testcase for trace_pipe which can consume
ringbuffer.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a testcase for function filter on module.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a testcase for max stack tracer, which checks basic
max stack usage tracing and its filter feature.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a testcase for function profiling per-cpu statistics
interface. There is already func_profile.tc, but that is
mainly focusing on the combination of function-profiler
and function tracer. This testcase ensures trace_stat
per-cpu function statistics is correctly updated.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a testcase for changing ringbuffer size. This tests
not only ringbuffer size but also tests the imbalance
per-cpu buffer size change too.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a testcase for kprobe-event with @symbol argument.
Since @symbol needs to refer the kernel data symbol
(linux_proc_banner), it requires CONFIG_KALLSYMS_ALL.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add kprobe-event with $comm argument testcase to
ftracetest. This not only checks syntax but
also checks log file.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Improve the kprobe-event with argument types testcase
to test it with various bitsize.
kprobe-event argument can be recorded in given types with
various bitsize (8, 16, 32, 64), thus the type testcase
should test the different bitsize too.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Improve kretprobe testcase to check the log data correctness
and ensure the event definition is corrctly including
argument definition.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Improve kprobe testcase to check the log data correctness
and ensure the event definition is corrctly including
argument definition.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Improve kprobe events on module testcase to check module
load/unload with disabled/enabled events. This also change
the target module to trace_printk.ko, so it depends on
CONFIG_SAMPLE_TRACE_PRINTK=m.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Use raw loopback address instead of localhost, because
"localhost" can depend on nsswitch and in some case
we can not resolve the localhost.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Fix a test case to make checkbashisms clean.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Test $comm in kprobe-event argument syntax testcase
only if it is supported on the kernel because
$comm has been introduced 4.8 kernel.
So on older stable kernel, it should be skipped.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Since ftracetest framework calls initialize_ftrace() right before
each test and after all tests, we don't need to init/cleanup
ftrace for each test case.
Just remove such unneeded init/cleanup code because it can
increase logfile size.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cleanup ftrace by initialize_ftrace() after running
all test cases. This means we also don't need cleanup
ftrace on each test case, except for some special
options.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add SPDX License Identifier line to template file so
that someone who makes new testcase from the template
does not forgot it.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Clear pid filter, synthetic_events, snapshots,
ftrace filter, and trace log in initialize_ftrace(),
since those are used in test cases.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a case number prefix to each logfile. This makes
it easier to find which logfile is corresponding
to which failure.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add --console hidden option for debug test cases.
This option allows to put "sh" or something else
when the test case hits a bug.
For example, if you find a testcase which doesn't
pass, you can insert sh for interactive debug as below
-----
#!/bin/sh
# description: sample test case
good-command
suspicious-wrong-command
sh # <- add this for interactive debug
-----
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add --stop-fail option for debugging the ftracetest.
With this option, ftracetest stops right after a testcase
fails instead of finish running all testcases.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
By default 'perf script' for itrace outputs sampled instructions or
branches. In my experience this is confusing to users because it's hard
to correlate with real program behavior. The sampling makes sense for
tools like 'perf report' that actually sample to reduce the run time,
but run time is normally not a problem for 'perf script'. It's better
to give an accurate representation of the program flow.
Default 'perf script' to output all calls for itrace. That's a much saner
default. The old behavior can be still requested with 'perf script'
--itrace=ibxwpe100000
v2: Fix ETM build failure
v3: Really fix ETM build failure (Kim Phillips)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Link: http://lkml.kernel.org/r/20180920180540.14039-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull networking updates from David Miller:
1) Add VF IPSEC offload support in ixgbe, from Shannon Nelson.
2) Add zero-copy AF_XDP support to i40e, from Björn Töpel.
3) All in-tree drivers are converted to {g,s}et_link_ksettings() so we
can get rid of the {g,s}et_settings ethtool callbacks, from Michal
Kubecek.
4) Add software timestamping to veth driver, from Michael Walle.
5) More work to make packet classifiers and actions lockless, from Vlad
Buslov.
6) Support sticky FDB entries in bridge, from Nikolay Aleksandrov.
7) Add ipv6 version of IP_MULTICAST_ALL sockopt, from Andre Naujoks.
8) Support batching of XDP buffers in vhost_net, from Jason Wang.
9) Add flow dissector BPF hook, from Petar Penkov.
10) i40e vf --> generic iavf conversion, from Jesse Brandeburg.
11) Add NLA_REJECT netlink attribute policy type, to signal when users
provide attributes in situations which don't make sense. From
Johannes Berg.
12) Switch TCP and fair-queue scheduler over to earliest departure time
model. From Eric Dumazet.
13) Improve guest receive performance by doing rx busy polling in tx
path of vhost networking driver, from Tonghao Zhang.
14) Add per-cgroup local storage to bpf
15) Add reference tracking to BPF, from Joe Stringer. The verifier can
now make sure that references taken to objects are properly released
by the program.
16) Support in-place encryption in TLS, from Vakul Garg.
17) Add new taprio packet scheduler, from Vinicius Costa Gomes.
18) Lots of selftests additions, too numerous to mention one by one here
but all of which are very much appreciated.
19) Support offloading of eBPF programs containing BPF to BPF calls in
nfp driver, frm Quentin Monnet.
20) Move dpaa2_ptp driver out of staging, from Yangbo Lu.
21) Lots of u32 classifier cleanups and simplifications, from Al Viro.
22) Add new strict versions of netlink message parsers, and enable them
for some situations. From David Ahern.
23) Evict neighbour entries on carrier down, also from David Ahern.
24) Support BPF sk_msg verdict programs with kTLS, from Daniel Borkmann
and John Fastabend.
25) Add support for filtering route dumps, from David Ahern.
26) New igc Intel driver for 2.5G parts, from Sasha Neftin et al.
27) Allow vxlan enslavement to bridges in mlxsw driver, from Ido
Schimmel.
28) Add queue and stack map types to eBPF, from Mauricio Vasquez B.
29) Add back byte-queue-limit support to r8169, with all the bug fixes
in other areas of the driver it works now! From Florian Westphal and
Heiner Kallweit.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2147 commits)
tcp: add tcp_reset_xmit_timer() helper
qed: Fix static checker warning
Revert "be2net: remove desc field from be_eq_obj"
Revert "net: simplify sock_poll_wait"
net: socionext: Reset tx queue in ndo_stop
net: socionext: Add dummy PHY register read in phy_write()
net: socionext: Stop PHY before resetting netsec
net: stmmac: Set OWN bit for jumbo frames
arm64: dts: stratix10: Support Ethernet Jumbo frame
tls: Add maintainers
net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode
octeontx2-af: Support for NIXLF's UCAST/PROMISC/ALLMULTI modes
octeontx2-af: Support for setting MAC address
octeontx2-af: Support for changing RSS algorithm
octeontx2-af: NIX Rx flowkey configuration for RSS
octeontx2-af: Install ucast and bcast pkt forwarding rules
octeontx2-af: Add LMAC channel info to NIXLF_ALLOC response
octeontx2-af: NPC MCAM and LDATA extract minimal configuration
octeontx2-af: Enable packet length and csum validation
octeontx2-af: Support for VTAG strip and capture
...
Add a report to display branches in a similar fashion to perf script. The
main purpose of this report is to display disassembly, however, presently,
the only supported disassembler is Intel XED, and additionally the object
code must be present in perf build ID cache.
To use Intel XED, libxed.so must be present. To build and install
libxed.so:
git clone https://github.com/intelxed/mbuild.git mbuild
git clone https://github.com/intelxed/xed
cd xed
./mfile.py --share
sudo ./mfile.py --prefix=/usr/local install
sudo ldconfig
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181023075949.18920-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Displaying all the database tables can help make the database easier to
understand.
Committer testing:
Opened all the tables, even the sqlite master table, which I selected
everything and used control+C, lets see if it works...
CREATE VIEW threads_view AS SELECT id,machine_id,(SELECT host_or_guest FROM machines_view WHERE id = machine_id) AS host_or_guest,process_id,pid,tid FROM threads
Humm, nope, just one of the cells got copied, even with everything selected :-)
Anyway, works as advertised, useful for perusing the data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-17-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Shrinking the font allows more information to display.
Committer testing:
Works, tested with the convenient Control+Shift+'+' and Control+'-' as
well with the more cumbersome top menu "Edit" + "Enlarge/Shrink font"
options.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-16-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a Find bar that appears at the bottom of the call-graph window.
Committer testing:
Using:
python tools/perf/scripts/python/exported-sql-viewer.py pt_example branches calls
Using the database built in the first "Committer Testing" section in
this patch series I was able to:
"Reports"
"Context-Sensitive Call Graphs"
Control+F or select "Edit" in the top menu then "Find"
__poll<ENTER>
and find the first place where the "__poll" function appears, then
press the down arrow in the lower right corner and go to the next, etc.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-15-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use Qt MDI (multiple document interface) to support multiple sub-windows.
Put the data model in a cache so that each sub-window can share the same
data. This allows mutiple views of the call-graph at the same time and
paves the way to add more reports.
Committer testing:
Starts with a "File Reports Windows" main menu, from the "Reports" I
can get what was available up to now, the "Context-Sensitivi Call Graph"
option.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-14-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Additional reports will be added to the script so rename to reflect the
more general purpose.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-13-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
class TreeItem represents items at all levels of the call-graph tree.
However, not all the levels represent the same data i.e. the top-level is
comms, the next level is threads, and subsequent levels are functions.
Consequently it is simpler to have separate classes for different levels
with commonality in a base class. Refactor TreeItem class accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-12-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add helper functions for a few common cases.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out CallGraphModel from TreeModel, which paves the way to reuse
TreeModel in future reports.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The object name is never used, so don't bother setting it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Keep global data in a single object that is easy to pass around as
needed, without polluting the global namespace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separate the database details into a class that can provide different
connections using the same connection information. That paves the way
for sub-processes that require their own connection.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make a "Main" function so that the variables used do not pollute the global
namespace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are not many standard icons, but the computer icon looks slightly
better than the information icon.
Committer testing:
Noticed the change on the icon on the gnome menu right next to the
"Activities" menu, looks nicer indeed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prevent weirdly small window size.
Committer testing:
Seems to work, but even before this patch, on my system, it always
started with:
xwininfo: Window id: 0x1e00002 "Call Graph: pt_example"
<SNIP>
Width: 800
Height: 600
<SNIP>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set initial column sizes to improve initial display.
Committer testing:
Extended instructions on testing this, using the sqlite variant:
Make sure you have the SQLite glue for python+Qt installed, on fedora 27
I used:
# dnf install python-pyside
Collect some PT samples, say 5-secs worth, system wide:
# perf record -r 10 -e intel_pt//u -a sleep 5
[ perf record: Woken up 49 times to write data ]
[ perf record: Captured and wrote 96.131 MB perf.data ]
This results in this perf.data file:
# ls -larth perf.data
-rw-------. 1 root root 97M Oct 23 10:11 perf.data
With the following attributes:
# perf evlist -v
intel_pt//u: type: 8, size: 112, config: 0x300e601, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, exclude_kernel: 1, exclude_hv: 1, sample_id_all: 1
dummy:u: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|IDENTIFIER, read_format: ID, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1, context_switch: 1
#
Then generate the "pt_example" tables using:
# perf script -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py pt_example branches calls
2018-10-23 10:56:59.177711 Creating database...
2018-10-23 10:56:59.195842 Writing records...
instruction trace error type 1 cpu 2 pid 1644 tid 1644 ip 0x263984516750 code 5: Failed to get instruction
instruction trace error type 1 cpu 2 pid 1644 tid 1644 ip 0x7f26e116fd20 code 6: Trace doesn't match instruction
instruction trace error type 1 cpu 2 pid 1644 tid 1644 ip 0x7f26e162c9ee code 6: Trace doesn't match instruction
instruction trace error type 1 cpu 2 pid 1644 tid 1644 ip 0x7f26e9ce831a code 6: Trace doesn't match instruction
<SNIP>
instruction trace error type 1 cpu 0 pid 1644 tid 1644 ip 0x7f26e13d07b4 code 6: Trace doesn't match instruction
Warning:
132 instruction trace errors
2018-10-23 11:25:25.015717 Adding indexes
2018-10-23 11:25:28.788061 Done
#
In my example, that perf.data file generated this db:
# file pt_example
pt_example: SQLite 3.x database, last written using SQLite version 3020001
[root@seventh perf]# ls -lah pt_example
-rw-r--r--. 1 root root 6.6G Oct 23 11:25 pt_example
#
Then use this python script to use that db and provide a GUI:
$ python tools/perf/scripts/python/call-graph-from-sql.py pt_example branches calls
I compared the column widths before this patch and after applying it,
the visual results match the patch intent.
The following patches will refer to this set of instructions in the "Committer
Testing" section.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull x86 cpu updates from Ingo Molnar:
"The main changes in this cycle were:
- Add support for the "Dhyana" x86 CPUs by Hygon: these are licensed
based on the AMD Zen architecture, and are built and sold in China,
for domestic datacenter use. The code is pretty close to AMD
support, mostly with a few quirks and enumeration differences. (Pu
Wen)
- Enable CPUID support on Cyrix 6x86/6x86L processors"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/cpupower: Add Hygon Dhyana support
cpufreq: Add Hygon Dhyana support
ACPI: Add Hygon Dhyana support
x86/xen: Add Hygon Dhyana support to Xen
x86/kvm: Add Hygon Dhyana support to KVM
x86/mce: Add Hygon Dhyana support to the MCA infrastructure
x86/bugs: Add Hygon Dhyana to the respective mitigation machinery
x86/apic: Add Hygon Dhyana support
x86/pci, x86/amd_nb: Add Hygon Dhyana support to PCI and northbridge
x86/amd_nb: Check vendor in AMD-only functions
x86/alternative: Init ideal_nops for Hygon Dhyana
x86/events: Add Hygon Dhyana support to PMU infrastructure
x86/smpboot: Do not use BSP INIT delay and MWAIT to idle on Dhyana
x86/cpu/mtrr: Support TOP_MEM2 and get MTRR number
x86/cpu: Get cache info and setup cache cpumap for Hygon Dhyana
x86/cpu: Create Hygon Dhyana architecture support file
x86/CPU: Change query logic so CPUID is enabled before testing
x86/CPU: Use correct macros for Cyrix calls
Pull perf updates from Ingo Molnar:
"The main updates in this cycle were:
- Lots of perf tooling changes too voluminous to list (big perf trace
and perf stat improvements, lots of libtraceevent reorganization,
etc.), so I'll list the authors and refer to the changelog for
details:
Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter
Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven
Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas
Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir
Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa.
... with the bulk of the changes written by Jiri Olsa, Tzvetomir
Stoyanov and Arnaldo Carvalho de Melo.
- Continued intel_rdt work with a focus on playing well with perf
events. This also imported some non-perf RDT work due to
dependencies. (Reinette Chatre)
- Implement counter freezing for Arch Perfmon v4 (Skylake and newer).
This allows to speed up the PMI handler by avoiding unnecessary MSR
writes and make it more accurate. (Andi Kleen)
- kprobes cleanups and simplification (Masami Hiramatsu)
- Intel Goldmont PMU updates (Kan Liang)
- ... plus misc other fixes and updates"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits)
kprobes/x86: Use preempt_enable() in optimized_callback()
x86/intel_rdt: Prevent pseudo-locking from using stale pointers
kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack
perf/x86/intel: Export mem events only if there's PEBS support
x86/cpu: Drop pointless static qualifier in punit_dev_state_show()
x86/intel_rdt: Fix initial allocation to consider CDP
x86/intel_rdt: CBM overlap should also check for overlap with CDP peer
x86/intel_rdt: Introduce utility to obtain CDP peer
tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file
tools lib traceevent: Separate out tep_strerror() for strerror_r() issues
perf python: More portable way to make CFLAGS work with clang
perf python: Make clang_has_option() work on Python 3
perf tools: Free temporary 'sys' string in read_event_files()
perf tools: Avoid double free in read_event_file()
perf tools: Free 'printk' string in parse_ftrace_printk()
perf tools: Cleanup trace-event-info 'tdata' leak
perf strbuf: Match va_{add,copy} with va_end
perf test: S390 does not support watchpoints in test 22
perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG
tools include: Adopt linux/bits.h
...
Pull locking and misc x86 updates from Ingo Molnar:
"Lots of changes in this cycle - in part because locking/core attracted
a number of related x86 low level work which was easier to handle in a
single tree:
- Linux Kernel Memory Consistency Model updates (Alan Stern, Paul E.
McKenney, Andrea Parri)
- lockdep scalability improvements and micro-optimizations (Waiman
Long)
- rwsem improvements (Waiman Long)
- spinlock micro-optimization (Matthew Wilcox)
- qspinlocks: Provide a liveness guarantee (more fairness) on x86.
(Peter Zijlstra)
- Add support for relative references in jump tables on arm64, x86
and s390 to optimize jump labels (Ard Biesheuvel, Heiko Carstens)
- Be a lot less permissive on weird (kernel address) uaccess faults
on x86: BUG() when uaccess helpers fault on kernel addresses (Jann
Horn)
- macrofy x86 asm statements to un-confuse the GCC inliner. (Nadav
Amit)
- ... and a handful of other smaller changes as well"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
locking/lockdep: Make global debug_locks* variables read-mostly
locking/lockdep: Fix debug_locks off performance problem
locking/pvqspinlock: Extend node size when pvqspinlock is configured
locking/qspinlock_stat: Count instances of nested lock slowpaths
locking/qspinlock, x86: Provide liveness guarantee
x86/asm: 'Simplify' GEN_*_RMWcc() macros
locking/qspinlock: Rework some comments
locking/qspinlock: Re-order code
locking/lockdep: Remove duplicated 'lock_class_ops' percpu array
x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y
futex: Replace spin_is_locked() with lockdep
locking/lockdep: Make class->ops a percpu counter and move it under CONFIG_DEBUG_LOCKDEP=y
x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs
x86/cpufeature: Macrofy inline assembly code to work around GCC inlining bugs
x86/extable: Macrofy inline assembly code to work around GCC inlining bugs
x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops
x86/bug: Macrofy the BUG table section handling, to work around GCC inlining bugs
x86/alternatives: Macrofy lock prefixes to work around GCC inlining bugs
x86/refcount: Work around GCC inlining bug
x86/objtool: Use asm macros to work around GCC inlining bugs
...
Pull RCU updates from Ingo Molnar:
"The biggest change in this cycle is the conclusion of the big
'simplify RCU to two primary flavors' consolidation work - i.e.
there's a single RCU flavor for any kernel variant (PREEMPT and
!PREEMPT):
- Consolidate the RCU-bh, RCU-preempt, and RCU-sched flavors into a
single flavor similar to RCU-sched in !PREEMPT kernels and into a
single flavor similar to RCU-preempt (but also waiting on
preempt-disabled sequences of code) in PREEMPT kernels.
This branch also includes a refactoring of
rcu_{nmi,irq}_{enter,exit}() from Byungchul Park.
- Now that there is only one RCU flavor in any given running kernel,
the many "rsp" pointers are no longer required, and this cleanup
series removes them.
- This branch carries out additional cleanups made possible by the
RCU flavor consolidation, including inlining now-trivial
functions, updating comments and definitions, and removing
now-unneeded rcutorture scenarios.
- Now that there is only one flavor of RCU in any running kernel,
there is also only on rcu_data structure per CPU. This means that
the rcu_dynticks structure can be merged into the rcu_data
structure, a task taken on by this branch. This branch also
contains a -rt-related fix from Mike Galbraith.
There were also other updates:
- Documentation updates, including some good-eye catches from Joel
Fernandes.
- SRCU updates, most notably changes enabling call_srcu() to be
invoked very early in the boot sequence.
- Torture-test updates, including some preliminary work towards
making rcutorture better able to find problems that result in
insufficient grace-period forward progress.
- Initial changes to RCU to better promote forward progress of grace
periods, including fixing a bug found by Marius Hillenbrand and
David Woodhouse, with the fix suggested by Peter Zijlstra"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
srcu: Make early-boot call_srcu() reuse workqueue lists
rcutorture: Test early boot call_srcu()
srcu: Make call_srcu() available during very early boot
rcu: Convert rcu_state.ofl_lock to raw_spinlock_t
rcu: Remove obsolete ->dynticks_fqs and ->cond_resched_completed
rcu: Switch ->dynticks to rcu_data structure, remove rcu_dynticks
rcu: Switch dyntick nesting counters to rcu_data structure
rcu: Switch urgent quiescent-state requests to rcu_data structure
rcu: Switch lazy counts to rcu_data structure
rcu: Switch last accelerate/advance to rcu_data structure
rcu: Switch ->tick_nohz_enabled_snap to rcu_data structure
rcu: Merge rcu_dynticks structure into rcu_data structure
rcu: Remove unused rcu_dynticks_snap() from Tiny RCU
rcu: Convert "1UL << x" to "BIT(x)"
rcu: Avoid resched_cpu() when rescheduling the current CPU
rcu: More aggressively enlist scheduler aid for nohz_full CPUs
rcu: Compute jiffies_till_sched_qs from other kernel parameters
rcu: Provide functions for determining if call_rcu() has been invoked
rcu: Eliminate ->rcu_qs_ctr from the rcu_dynticks structure
rcu: Motivate Tiny RCU forward progress
...
- Backport hibernation bug fixes from x86-64 to x86-32 and
consolidate hibernation handling on x86 to allow 32-bit
systems to work in all of the cases in which 64-bit ones
work (Zhimin Gu, Chen Yu).
- Fix hibernation documentation (Vladimir D. Seleznev).
- Update the menu cpuidle governor to fix a couple of issues
with it, make it more efficient in some cases and clean it
up (Rafael Wysocki).
- Rework the cpuidle polling state implementation to make it
more efficient (Rafael Wysocki).
- Clean up the cpuidle core somewhat (Fieah Lim).
- Fix the cpufreq conservative governor to take policy limits
into account properly in some cases (Rafael Wysocki).
- Add support for retrieving guaranteed performance information
to the ACPI CPPC library and make the intel_pstate driver use
it to expose the CPU base frequency via sysfs on systems with
the hardware-managed P-states (HWP) feature enabled (Srinivas
Pandruvada).
- Fix clang warning in the CPPC cpufreq driver (Nathan Chancellor).
- Get rid of device_node.name printing from cpufreq (Rob Herring).
- Remove unnecessary unlikely() from the cpufreq core (Igor Stoppa).
- Add support for the r8a7744 SoC to the cpufreq-dt driver (Biju Das).
- Update the dt-platdev cpufreq driver to allow RK3399 to have
separate tunables per cluster (Dmitry Torokhov).
- Fix the dma_alloc_coherent() usage in the tegra186 cpufreq driver
(Christoph Hellwig).
- Make the imx6q cpufreq driver read OCOTP through nvmem for
imx6ul/imx6ull (Anson Huang).
- Fix several bugs in the operating performance points (OPP)
framework and make it more stable (Viresh Kumar, Dave Gerlach).
- Update the devfreq subsystem to take changes in the APIs used
by into account, fix some issues with it and make it stop
print device_node.name directly (Bjorn Andersson, Enric Balletbo
i Serra, Matthias Kaehlcke, Rob Herring, Vincent Donnefort, zhong
jiang).
- Prepare the generic power domains (genpd) framework for dealing
with domains containing CPUs (Ulf Hansson).
- Prevent sysfs attributes representing low-power S0 residency
counters from being exposed if low-power S0 support is not
indicated in ACPI FADT (Rajneesh Bhardwaj).
- Get rid of custom CPU features macros for Intel CPUs from the
intel_idle and RAPL drivers (Andy Shevchenko).
- Update the tasks freezer to list tasks that refused to freeze
and caused a system transition to a sleep state to be aborted
(Todd Brandt).
- Update the pm-graph set of tools to v5.2 (Todd Brandt).
- Fix some issues in the cpupower utility (Anders Roxell, Prarit
Bhargava).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=WJgu
-----END PGP SIGNATURE-----
Merge tag 'pm-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These make hibernation on 32-bit x86 systems work in all of the cases
in which it works on 64-bit x86 ones, update the menu cpuidle governor
and the "polling" state to make them more efficient, add more hardware
support to cpufreq drivers and fix issues with some of them, fix a bug
in the conservative cpufreq governor, fix the operating performance
points (OPP) framework and make it more stable, update the devfreq
subsystem to take changes in the APIs used by into account and clean
up some things all over.
Specifics:
- Backport hibernation bug fixes from x86-64 to x86-32 and
consolidate hibernation handling on x86 to allow 32-bit systems to
work in all of the cases in which 64-bit ones work (Zhimin Gu, Chen
Yu).
- Fix hibernation documentation (Vladimir D. Seleznev).
- Update the menu cpuidle governor to fix a couple of issues with it,
make it more efficient in some cases and clean it up (Rafael
Wysocki).
- Rework the cpuidle polling state implementation to make it more
efficient (Rafael Wysocki).
- Clean up the cpuidle core somewhat (Fieah Lim).
- Fix the cpufreq conservative governor to take policy limits into
account properly in some cases (Rafael Wysocki).
- Add support for retrieving guaranteed performance information to
the ACPI CPPC library and make the intel_pstate driver use it to
expose the CPU base frequency via sysfs on systems with the
hardware-managed P-states (HWP) feature enabled (Srinivas
Pandruvada).
- Fix clang warning in the CPPC cpufreq driver (Nathan Chancellor).
- Get rid of device_node.name printing from cpufreq (Rob Herring).
- Remove unnecessary unlikely() from the cpufreq core (Igor Stoppa).
- Add support for the r8a7744 SoC to the cpufreq-dt driver (Biju
Das).
- Update the dt-platdev cpufreq driver to allow RK3399 to have
separate tunables per cluster (Dmitry Torokhov).
- Fix the dma_alloc_coherent() usage in the tegra186 cpufreq driver
(Christoph Hellwig).
- Make the imx6q cpufreq driver read OCOTP through nvmem for
imx6ul/imx6ull (Anson Huang).
- Fix several bugs in the operating performance points (OPP)
framework and make it more stable (Viresh Kumar, Dave Gerlach).
- Update the devfreq subsystem to take changes in the APIs used by
into account, fix some issues with it and make it stop print
device_node.name directly (Bjorn Andersson, Enric Balletbo i Serra,
Matthias Kaehlcke, Rob Herring, Vincent Donnefort, zhong jiang).
- Prepare the generic power domains (genpd) framework for dealing
with domains containing CPUs (Ulf Hansson).
- Prevent sysfs attributes representing low-power S0 residency
counters from being exposed if low-power S0 support is not
indicated in ACPI FADT (Rajneesh Bhardwaj).
- Get rid of custom CPU features macros for Intel CPUs from the
intel_idle and RAPL drivers (Andy Shevchenko).
- Update the tasks freezer to list tasks that refused to freeze and
caused a system transition to a sleep state to be aborted (Todd
Brandt).
- Update the pm-graph set of tools to v5.2 (Todd Brandt).
- Fix some issues in the cpupower utility (Anders Roxell, Prarit
Bhargava)"
* tag 'pm-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (73 commits)
PM / Domains: Document flags for genpd
PM / Domains: Deal with multiple states but no governor in genpd
PM / Domains: Don't treat zero found compatible idle states as an error
cpuidle: menu: Avoid computations when result will be discarded
cpuidle: menu: Drop redundant comparison
cpufreq: tegra186: don't pass GFP_DMA32 to dma_alloc_coherent()
cpufreq: conservative: Take limits changes into account properly
Documentation: intel_pstate: Add base_frequency information
cpufreq: intel_pstate: Add base_frequency attribute
ACPI / CPPC: Add support for guaranteed performance
cpuidle: menu: Simplify checks related to the polling state
PM / tools: sleepgraph and bootgraph: upgrade to v5.2
PM / tools: sleepgraph: first batch of v5.2 changes
cpupower: Fix coredump on VMWare
cpupower: Fix AMD Family 0x17 msr_pstate size
cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull
cpufreq: dt-platdev: allow RK3399 to have separate tunables per cluster
cpuidle: poll_state: Revise loop termination condition
cpuidle: menu: Move the latency_req == 0 special case check
cpuidle: menu: Avoid computations for very close timers
...
add test to verify if act_police forbids 'goto chain' control actions for
'exceed' traffic.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
add test to verify if act_gact forbids 'goto chain' control actions on
'random' traffic in gact.json.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One new core feature here, a small collection of new drivers and a bunch
of small improvements in existing drivers.
- A new CS_WORD flag for transfers where the chip select is toggled at
every word, with both a generic implementation and the ability for
controllers to do this automatically (including a DaVinci one).
- New drivers for Mediatek MT2712, Qualcomm GENI and QSPI, Spreadtrum
SPI and ST STM32 QSPI plus new IDs for several existing ones.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlvNwCATHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0L8HB/9Xk9DCeTmdioVeVXI9lQj1lqKuLOcH
ip4sVOpfVgFhFzuvzXAHiGbhzrsYNlfTW7wqgJasWQthzXMlXrF2szODUqPniowK
OnUouATG6jizHupIB3ewsK5Hf292f7D9OoKWGoWVu2QmJyVzSPASp3foFwQqJIca
iW9hB8d/WBueq7mGcoCJpA4HI97+8XxUp2LO+gpcMwtwncFP9p8FFLrkdOwqEGFK
y/NmD4CzzIA/YQXZF7WeGfwTwoLHJf2BwHY/ZNfXy/A0/nXQdqPQqqN5iiR8zsaX
Xve28mwmSDBExX1KdexRbO+4jZbgMTk4NM8hEz0h3H22xIVegkBfoadg
=UdBu
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"One new core feature here, a small collection of new drivers and a
bunch of small improvements in existing drivers:
- A new CS_WORD flag for transfers where the chip select is toggled
at every word, with both a generic implementation and the ability
for controllers to do this automatically (including a DaVinci one).
- New drivers for Mediatek MT2712, Qualcomm GENI and QSPI, Spreadtrum
SPI and ST STM32 QSPI plus new IDs for several existing ones"
* tag 'spi-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (86 commits)
spi: lpspi: add imx8qxp compatible string
spi: Allow building SPI_BCM63XX_HSSPI on ARM-based SoCs
spi: omap2-mcspi: Add slave mode support
spi: omap2-mcspi: Set FIFO DMA trigger level to word length
spi: omap2-mcspi: Switch to readl_poll_timeout()
spi: spi-mem: add stm32 qspi controller
dt-bindings: spi: add stm32 qspi controller
spi: sh-msiof: document R8A779{7|8}0 bindings
spi: pic32-sqi: don't pass GFP_DMA32 to dma_alloc_coherent
MAINTAINERS: Add entry for Broadcom SPI controller
spi: sh-msiof: fix deferred probing
spi: imx: use PIO mode if size is small
spi: imx: correct wml as the last sg length
spi: imx: move wml setting to later than setup_transfer
PCI: Provide pci_match_id() with CONFIG_PCI=n
spi: Make GPIO CSs honour the SPI_NO_CS flag
spi/spi-pxa2xx: add PXA2xx SSP SPI Controller
spi: pxa2xx: Add devicetree support
spi: pxa2xx: Use an enum for type
spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
...
When the perf script output is written to a terminal stream, the normal
output of `perf script` would get buffered, but its debug output would
be written directly. This made it quite hard to figure out where a given
debug output is coming from.
We can improve on this by flushing the output buffer after processing an
event. To see the value, compare the following output for a `perf script
-v` run:
Before this patch:
```
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
... lots and lots of verbose debug output
cpp-inlining 24617 90229.122036534: 1 cycles:uppp:
7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
cpp-inlining 24617 90229.122043974: 1 cycles:uppp:
7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
...
```
After this patch:
```
...
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
cpp-inlining 24617 90229.122036534: 1 cycles:uppp:
7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
cpp-inlining 24617 90229.122043974: 1 cycles:uppp:
7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
...
```
This new output format makes it much easier to use perf script output
for debugging purposes, e.g. to investigate broken dwarf unwinding.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181021191424.16183-2-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The script tool isn't using a browser, yet use_browser wasn't set
explicitly to zero. This in turn lead to confusing output such as:
```
$ perf script -vvv ...
...
overlapping maps in /home/milian/foobar (disable tui for more info)
...
```
Explicitly set use_browser to 0 now, which gives us the extended
debug information now in perf script as expected.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20181021191424.16183-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding the check for tasks we monitor via -p/-t options, and finish stat
if there's no longer task to monitor.
Requested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20181022093015.9106-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We must pair:
thread = machine__findnew_thread();
with thread__put(thread). Fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: c4191e55b8 ("perf trace: Show comm and tid for tracepoint events")
Link: https://lkml.kernel.org/n/tip-dkxsb8cwg87rmkrzrbns1o4z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we use machine__resolve() we grab a reference to
addr_location.thread (and in the future to other elements there) via
machine__findnew_thread(), so we must pair that with
addr_location__put(), else we'll never drop that thread when it exits
and no other remaining data structures have pointers to it. Fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ivg9hifzeuokb1f5jxc2wob4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because there may be more such events in the ring buffer that should be
discarded when an app decides to stop considering them.
At some point we'll do this with eBPF, this way we stop them at origin,
before they are placed in the ring buffer.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-uzufuxws4hufigx07ue1dpv6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-10-21
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Implement two new kind of BPF maps, that is, queue and stack
map along with new peek, push and pop operations, from Mauricio.
2) Add support for MSG_PEEK flag when redirecting into an ingress
psock sk_msg queue, and add a new helper bpf_msg_push_data() for
insert data into the message, from John.
3) Allow for BPF programs of type BPF_PROG_TYPE_CGROUP_SKB to use
direct packet access for __skb_buff, from Song.
4) Use more lightweight barriers for walking perf ring buffer for
libbpf and perf tool as well. Also, various fixes and improvements
from verifier side, from Daniel.
5) Add per-symbol visibility for DSO in libbpf and hide by default
global symbols such as netlink related functions, from Andrey.
6) Two improvements to nfp's BPF offload to check vNIC capabilities
in case prog is shared with multiple vNICs and to protect against
mis-initializing atomic counters, from Jakub.
7) Fix for bpftool to use 4 context mode for the nfp disassembler,
also from Jakub.
8) Fix a return value comparison in test_libbpf.sh and add several
bpftool improvements in bash completion, documentation of bpf fs
restrictions and batch mode summary print, from Quentin.
9) Fix a file resource leak in BPF selftest's load_kallsyms()
helper, from Peng.
10) Fix an unused variable warning in map_lookup_and_delete_elem(),
from Alexei.
11) Fix bpf_skb_adjust_room() signature in BPF UAPI helper doc,
from Nicolas.
12) Add missing executables to .gitignore in BPF selftests, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern's dump indexing bug fix in 'net' overlapped the
change of the function signature of inet6_fill_ifaddr() in
'net-next'. Trivially resolved.
Signed-off-by: David S. Miller <davem@davemloft.net>
When trying to complete "bpftool map update" commands, the call to
printf would print an error message that would show on the command line
if no map is found to complete the command line.
Fix it by making sure we have map ids to complete the line with, before
we try to print something.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When batch mode is used and all commands succeeds, bpftool prints the
number of commands processed to stderr. There is no particular reason to
use stderr for this, we could as well use stdout. It would avoid getting
unnecessary output on stderr if the standard ouptut is redirected, for
example.
Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Names used to pin eBPF programs and maps under the eBPF virtual file
system cannot contain a dot character, which is reserved for future
extensions of this file system.
Document this in bpftool man pages to avoid users getting confused if
pinning fails because of a dot.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
All users have now been converted to the XArray. Removing the support
reduces code size and ensures new users will use the XArray instead.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
This is the last remaining user of the multiorder functionality of the
radix tree. Test the XArray instead.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
In preparation for the removal of the multiorder radix tree code,
convert item_delete_rcu() to use the XArray so it can still be called
for XArrays containing multi-index entries.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
In preparation for the removal of the multiorder radix tree code,
convert item_kill_tree() to use the XArray so it can still be called
for XArrays containing multi-index entries.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
The remaining tests are not suitable for moving in-kernel, so move
item_insert_order() into multiorder.c, make it static and make it use
the XArray.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
This version is a little less thorough in order to be a little quicker,
but tests the important edge cases. Also test adding a multiorder entry
at a non-canonical index, and erasing it.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Test this functionality inside the kernel as well as in userspace.
Also remove insert_bug() as there's no comparable thing to test
in the XArray code.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
With no code left in the kernel using the multiorder radix tree, convert
the iteration test from the radix tree to the XArray. It's unlikely to
suffer the same bug as the radix tree, but this test will prevent that
bug from ever creeping into the XArray implementation.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
The tag_tagged_items() function is supposed to test the page-writeback
tagging code. Since that has been converted to the XArray, there's
not much point in testing the radix tree's tagging code. This requires
using the pthread mutex embedded in the xarray instead of an external
lock, so remove the pthread mutexes which protect xarrays/radix trees.
Also remove radix_tree_iter_tag_set() as this was the last user.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
The page cache was the only user of this interface and it has now
been converted to the XArray. Transform the test into a test of
xas_init_marks().
Signed-off-by: Matthew Wilcox <willy@infradead.org>
radix_tree_split and radix_tree_join were never used upstream. Remove
them; if they're needed in future they will be replaced by XArray
equivalents.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
The only user of this functionality was the workingset code, and it's
now been converted to the XArray. Remove __radix_tree_delete_node()
entirely as it was also only used by the workingset code.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
This is a 1:1 conversion. The major part of this patch is converting
the test framework from userspace to kernel space and mirroring the
algorithm now used in find_swap_entry().
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Now the page cache lookup is using the XArray, let's convert this
regression test from the radix tree API to the XArray so it's testing
roughly the same thing it was testing before.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
There's no direct replacement for radix_tree_for_each_contig()
in the XArray API as it's an unusual thing to do. Instead,
open-code a loop using xas_next(). This removes the only user of
radix_tree_for_each_contig() so delete the iterator from the API and
the test suite code for it.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Use the XA_TRACK_FREE ability to track which entries have a free bit,
similarly to how it uses the radix tree's IDR_FREE tag. This eliminates
the per-cpu ida_bitmap preload, and fixes the memory consumption
regression I introduced when making the IDR able to store any pointer.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
xa_store() differs from radix_tree_insert() in that it will overwrite an
existing element in the array rather than returning an error. This is
the behaviour which most users want, and those that want more complex
behaviour generally want to use the xas family of routines anyway.
For memory allocation, xa_store() will first attempt to request memory
from the slab allocator; if memory is not immediately available, it will
drop the xa_lock and allocate memory, keeping a pointer in the xa_state.
It does not use the per-CPU cache, although those will continue to exist
until all radix tree users are converted to the xarray.
This patch also includes xa_erase() and __xa_erase() for a streamlined
way to store NULL. Since there is no need to allocate memory in order
to store a NULL in the XArray, we do not need to trouble the user with
deciding what memory allocation flags to use.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
XArray marks are like the radix tree tags, only slightly more strongly
typed. They are renamed in order to distinguish them from tagged
pointers. This commit adds the basic get/set/clear operations.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
The xa_load function brings with it a lot of infrastructure; xa_empty(),
xa_is_err(), and large chunks of the XArray advanced API that are used
to implement xa_load.
As the test-suite demonstrates, it is possible to use the XArray functions
on a radix tree. The radix tree functions depend on the GFP flags being
stored in the root of the tree, so it's not possible to use the radix
tree functions on an XArray.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
This is a direct replacement for struct radix_tree_node. A couple of
struct members have changed name, so convert those. Use a #define so
that radix tree users continue to work without change.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
This is a direct replacement for struct radix_tree_root. Some of the
struct members have changed name; convert those, and use a #define so
that radix_tree users continue to work without change.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
The return value for each test in test_libbpf.sh is compared with
if (( $? == 0 )) ; then ...
This works well with bash, but not with dash, that /bin/sh is aliased to
on some systems (such as Ubuntu).
Let's replace this comparison by something that works on both shells.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Simplify bpf_perf_event_read_simple() a bit and fix up some minor
things along the way: the return code in the header is not of type
int but enum bpf_perf_event_ret instead. Once callback indicated
to break the loop walking event data, it also needs to be consumed
in data_tail since it has been processed already.
Moreover, bpf_perf_event_print_t callback should avoid void * as
we actually get a pointer to struct perf_event_header and thus
applications can make use of container_of() to have type checks.
The walk also doesn't have to use modulo op since the ring size is
required to be power of two.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Using reg_type_str[insn->dst_reg] is incorrect since insn->dst_reg
contains the register number but not the actual register type. Add
a small reg_state() helper and use it to get to the type. Also fix
up the test_verifier test cases that have an incorrect errstr.
Fixes: 9d2be44a7f ("bpf: Reuse canonical string formatter for ctx errs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add options to run msg_push_data, this patch creates two more flags
in test_sockmap that can be used to specify the offset and length
of bytes to be added. The new options are --txmsg_start_push to
specify where bytes should be inserted and --txmsg_end_push to
specify how many bytes. This is analagous to the options that are
used to pull data, --txmsg_start and --txmsg_end.
In addition to adding the options tests are added to the test
suit to run the tests similar to what was done for msg_pull_data.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add support for new bpf_msg_push_data in libbpf.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Ingo writes:
"perf fixes:
Misc perf tooling fixes."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Stop fallbacking to kallsyms for vdso symbols lookup
perf tools: Pass build flags to traceevent build
perf report: Don't crash on invalid inline debug information
perf cpu_map: Align cpu map synthesized events properly.
perf tools: Fix tracing_path_mount proper path
perf tools: Fix use of alternatives to find JDIR
perf evsel: Store ids for events with their own cpus perf_event__synthesize_event_update_cpus
perf vendor events intel: Fix wrong filter_band* values for uncore events
Revert "perf tools: Fix PMU term format max value calculation"
tools headers uapi: Sync kvm.h copy
tools arch uapi: Sync the x86 kvm.h copy
The first two patches fix handling of unsigned type, and handling
of a space before an ending semi-colon.
The third patch adds a selftest to test the processing of synthetic events.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW8pMwxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qn2jAQCV4leBtN9EAax4B9Mmy4e5oYGE0SDF
Qq0f/Zb1SLYbTwD/Wdo+mqOAc9EFYkrxRjvgufgqM4bOUufW4fOQnqqPnwI=
=GS2b
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Steven writes:
"tracing: A few small fixes to synthetic events
Masami found some issues with the creation of synthetic events. The
first two patches fix handling of unsigned type, and handling of a
space before an ending semi-colon.
The third patch adds a selftest to test the processing of synthetic
events."
* tag 'trace-v4.19-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
selftests: ftrace: Add synthetic event syntax testcase
tracing: Fix synthetic event to allow semicolon at end
tracing: Fix synthetic event to accept unsigned modifier
This tests that a bctr (Branch to counter and link), ie. a function
call, to a wildly out-of-bounds address is handled correctly.
Some old kernel versions didn't handle it correctly, see eg:
"powerpc/slb: Force a full SLB flush when we insert for a bad EA"
https://lists.ozlabs.org/pipermail/linuxppc-dev/2017-April/157397.html
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds a test to verify proper functioning of the rfi flush
capability implemented to mitigate meltdown. The test works by
measuring the number of L1d cache misses encountered while loading
data from memory. Across a system call, since the L1d cache is flushed
when rfi_flush is enabled, the number of cache misses is expected to
be relative to the number of cachelines corresponding to the data
being loaded.
The current system setting is reflected via powerpc/rfi_flush under
debugfs (assumed to be /sys/kernel/debug/). This test verifies the
expected result with rfi_flush enabled as well as when it is disabled.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Add SPDX tags, clang format, skip if the debugfs is missing, use
__u64 and SANE_USERSPACE_TYPES to avoid printf() build errors.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
... so that it can be used by others.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a testcase to check the syntax and field types for
synthetic_events interface.
Link: http://lkml.kernel.org/r/153986838264.18251.16627517536956299922.stgit@devbox
Acked-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tests are added to make sure CGROUP_SKB cannot access:
tc_classid, data_meta, flow_keys
and can read and write:
mark, prority, and cb[0-4]
and can read other fields.
To make selftest with skb->sk work, a dummy sk is added in
bpf_prog_test_run_skb().
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Given libbpf is a generic library and not restricted to x86-64 only,
the compiler barrier in bpf_perf_event_read_simple() after fetching
the head needs to be replaced with smp_rmb() at minimum. Also, writing
out the tail we should use WRITE_ONCE() to avoid store tearing.
Now that we have the logic in place in ring_buffer_read_head() and
ring_buffer_write_tail() helper also used by perf tool which would
select the correct and best variant for a given architecture (e.g.
x86-64 can avoid CPU barriers entirely), make use of these in order
to fix bpf_perf_event_read_simple().
Fixes: d0cabbb021 ("tools: bpf: move the event reading loop to libbpf")
Fixes: 39111695b1 ("samples: bpf: add bpf_perf_event_output example")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, on x86-64, perf uses LFENCE and MFENCE (rmb() and mb(),
respectively) when processing events from the perf ring buffer which
is unnecessarily expensive as we can do more lightweight in particular
given this is critical fast-path in perf.
According to Peter rmb()/mb() were added back then via a94d342b9c
("tools/perf: Add required memory barriers") at a time where kernel
still supported chips that needed it, but nowadays support for these
has been ditched completely, therefore we can fix them up as well.
While for x86-64, replacing rmb() and mb() with smp_*() variants would
result in just a compiler barrier for the former and LOCK + ADD for
the latter (__sync_synchronize() uses slower MFENCE by the way), Peter
suggested we can use smp_{load_acquire,store_release}() instead for
architectures where its implementation doesn't resolve in slower smp_mb().
Thus, e.g. in x86-64 we would be able to avoid CPU barrier entirely due
to TSO. For architectures where the latter needs to use smp_mb() e.g.
on arm, we stick to cheaper smp_rmb() variant for fetching the head.
This work adds helpers ring_buffer_read_head() and ring_buffer_write_tail()
for tools infrastructure that either switches to smp_load_acquire() for
architectures where it is cheaper or uses READ_ONCE() + smp_rmb() barrier
for those where it's not in order to fetch the data_head from the perf
control page, and it uses smp_store_release() to write the data_tail.
Latter is smp_mb() + WRITE_ONCE() combination or a cheaper variant if
architecture allows for it. Those that rely on smp_rmb() and smp_mb() can
further improve performance in a follow up step by implementing the two
under tools/arch/*/include/asm/barrier.h such that they don't have to
fallback to rmb() and mb() in tools/include/asm/barrier.h.
Switch perf to use ring_buffer_read_head() and ring_buffer_write_tail()
so it can make use of the optimizations. Later, we convert libbpf as
well to use the same helpers.
Side note [0]: the topic has been raised of whether one could simply use
the C11 gcc builtins [1] for the smp_load_acquire() and smp_store_release()
instead:
__atomic_load_n(ptr, __ATOMIC_ACQUIRE);
__atomic_store_n(ptr, val, __ATOMIC_RELEASE);
Kernel and (presumably) tooling shipped along with the kernel has a
minimum requirement of being able to build with gcc-4.6 and the latter
does not have C11 builtins. While generally the C11 memory models don't
align with the kernel's, the C11 load-acquire and store-release alone
/could/ suffice, however. Issue is that this is implementation dependent
on how the load-acquire and store-release is done by the compiler and
the mapping of supported compilers must align to be compatible with the
kernel's implementation, and thus needs to be verified/tracked on a
case by case basis whether they match (unless an architecture uses them
also from kernel side). The implementations for smp_load_acquire() and
smp_store_release() in this patch have been adapted from the kernel side
ones to have a concrete and compatible mapping in place.
[0] http://patchwork.ozlabs.org/patch/985422/
[1] https://gcc.gnu.org/onlinedocs/gcc/_005f_005fatomic-Builtins.html
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_maps:
Tests that queue/stack maps are behaving correctly even in corner cases
test_progs:
Tests new ebpf helpers
Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Sync both files.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This simply adds the field to 'struct perf_evsel' and allows setting
it via the event parser, to test it lets trace trace:
First look at where in a function that receives an evsel we can put a probe
to read how evsel->max_events was setup:
# perf probe -x ~/bin/perf -L trace__event_handler
<trace__event_handler@/home/acme/git/perf/tools/perf/builtin-trace.c:0>
0 static int trace__event_handler(struct trace *trace, struct perf_evsel *evsel,
union perf_event *event __maybe_unused,
struct perf_sample *sample)
3 {
4 struct thread *thread = machine__findnew_thread(trace->host, sample->pid, sample->tid);
5 int callchain_ret = 0;
7 if (sample->callchain) {
8 callchain_ret = trace__resolve_callchain(trace, evsel, sample, &callchain_cursor);
9 if (callchain_ret == 0) {
10 if (callchain_cursor.nr < trace->min_stack)
11 goto out;
12 callchain_ret = 1;
}
}
See what variables we can probe at line 7:
# perf probe -x ~/bin/perf -V trace__event_handler:7
Available variables at trace__event_handler:7
@<trace__event_handler+89>
int callchain_ret
struct perf_evsel* evsel
struct perf_sample* sample
struct thread* thread
struct trace* trace
union perf_event* event
Add a probe at that line asking for evsel->max_events to be collected and named
as "max_events":
# perf probe -x ~/bin/perf trace__event_handler:7 'max_events=evsel->max_events'
Added new event:
probe_perf:trace__event_handler (on trace__event_handler:7 in /home/acme/bin/perf with max_events=evsel->max_events)
You can now use it in all perf tools, such as:
perf record -e probe_perf:trace__event_handler -aR sleep 1
Now use 'perf trace', here aliased to just 'trace' and trace trace, i.e.
the first 'trace' is tracing just that 'probe_perf:trace__event_handler' event,
while the traced trace is tracing all scheduler tracepoints, will stop at two
events (--max-events 2) and will just set evsel->max_events for all the sched
tracepoints to 9, we will see the output of both traces intermixed:
# trace -e *perf:*event_handler trace --max-events 2 -e sched:*/nr=9/
0.000 :0/0 sched:sched_waking:comm=rcu_sched pid=10 prio=120 target_cpu=000
0.009 :0/0 sched:sched_wakeup:comm=rcu_sched pid=10 prio=120 target_cpu=000
0.000 trace/23949 probe_perf:trace__event_handler:(48c34a) max_events=0x9
0.046 trace/23949 probe_perf:trace__event_handler:(48c34a) max_events=0x9
#
Now, if the traced trace sends its output to /dev/null, we'll see just
what the first level trace outputs: that evsel->max_events is indeed
being set to 9:
# trace -e *perf:*event_handler trace -o /dev/null --max-events 2 -e sched:*/nr=9/
0.000 trace/23961 probe_perf:trace__event_handler:(48c34a) max_events=0x9
0.030 trace/23961 probe_perf:trace__event_handler:(48c34a) max_events=0x9
#
Now that we can set evsel->max_events, we can go to the next step, honour that
per-event property in 'perf trace'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-og00yasj276joem6e14l1eas@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
net/sched/cls_api.c has overlapping changes to a call to
nlmsg_parse(), one (from 'net') added rtm_tca_policy instead of NULL
to the 5th argument, and another (from 'net-next') added cb->extack
instead of NULL to the 6th argument.
net/ipv4/ipmr_base.c is a case of a bug fix in 'net' being done to
code which moved (to mr_table_dump)) in 'net-next'. Thanks to David
Ahern for the heads up.
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are a small number of last-minute USB driver fixes
Included here are:
- spectre fix for usb storage gadgets
- xhci fixes
- cdc-acm fixes
- usbip fixes for reported problems
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW8oNdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym5xgCfQ55kmFLnpRKNvLG+ihYAoJ7OPOoAoKiXhWTF
GhtlV7Qu4s6JkLBEIN2n
=241b
-----END PGP SIGNATURE-----
Merge tag 'usb-4.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
I wrote:
"USB fixes for 4.19-final
Here are a small number of last-minute USB driver fixes
Included here are:
- spectre fix for usb storage gadgets
- xhci fixes
- cdc-acm fixes
- usbip fixes for reported problems
All of these have been in linux-next with no reported issues."
* tag 'usb-4.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: storage: Fix Spectre v1 vulnerability
USB: fix the usbfs flag sanitization for control transfers
usb: xhci: pci: Enable Intel USB role mux on Apollo Lake platforms
usb: roles: intel_xhci: Fix Unbalanced pm_runtime_enable
cdc-acm: correct counting of UART states in serial state notification
cdc-acm: do not reset notification buffer index upon urb unlinking
cdc-acm: fix race between reset and control messaging
usb: usbip: Fix BUG: KASAN: slab-out-of-bounds in vhci_hub_control()
selftests: usbip: add wait after attach and before checking port status
For completeness, will be used in 'perf trace --max-events'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-glaj3pwespxfj2fdjs9a20b6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When /tmp is mounted with noexec, mksyscalltbl fails.
[snip]
|perf-1.0/tools/perf/arch/arm64/entry/syscalls//mksyscalltbl:
/tmp/create-table-6VGPSt: Permission denied
[snip]
Add variable TMPDIR as prefix dir of the temporary file, if it is set,
replace default /tmp.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sébastien Boisvert <sboisvert@gydle.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Fixes: 2b58824356 ("perf arm64: Generate system call table from asm/unistd.h")
LPU-Reference: 1539851173-14959-1-git-send-email-hongxu.jia@windriver.com
Link: https://lkml.kernel.org/n/tip-1qrgq840ci0c5cy4oww957ge@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The nfp driver is currently always JITing the BPF for 4 context/thread
mode of the NFP flow processors. Tell this to the disassembler,
otherwise some registers may be incorrectly decoded.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
FILE pointer variable f is opened but never closed.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently the call to atoi is being passed a single char string
that is not null terminated, so there is a potential read overrun
along the stack when parsing for an integer value. Fix this by
instead using a 2 char string that is initialized to all zeros
to ensure that a 1 char read into the string is always terminated
with a \0.
Detected by cppcheck:
"Invalid atoi() argument nr 1. A nul-terminated string is required."
Fixes: 3391ba0e27 ("usbip: tools: Extract generic code to be shared with vudc backend")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using the sh_entsize for both values isn't correct. It happens to be
correct on x86...
For both 32-bit and 64-bit sparc, there are four PLT entries in the PLT
section.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: David Tolnay <dtolnay@gmail.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: zhangmengting@huawei.com
Fixes: b2f7605076 ("perf symbols: Fix plt entry calculation for ARM and AARCH64")
Link: http://lkml.kernel.org/r/20181017.120859.2268840244308635255.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* pm-devfreq:
PM / devfreq: remove redundant null pointer check before kfree
PM / devfreq: stopping the governor before device_unregister()
PM / devfreq: Convert to using %pOFn instead of device_node.name
PM / devfreq: Make update_devfreq() public
PM / devfreq: Don't adjust to user limits in governors
PM / devfreq: Fix handling of min/max_freq == 0
PM / devfreq: Drop custom MIN/MAX macros
PM / devfreq: Fix devfreq_add_device() when drivers are built as modules.
* pm-tools:
PM / tools: sleepgraph and bootgraph: upgrade to v5.2
PM / tools: sleepgraph: first batch of v5.2 changes
cpupower: Fix coredump on VMWare
cpupower: Fix AMD Family 0x17 msr_pstate size
cpupower: remove stringop-truncation waring
- Stop fallbacking to kallsyms for vDSO symbols lookup, this wasn't
being really used and is not valid in arches such as Sparc, where
user and kernel space don't share the address space, relying only on
cpumode to figure out what DSOs to lookup (Arnaldo Carvalho de Melo)
- Align cpu map synthesized events properly, fixing SIGBUS in
CPUs like Sparc (David Miller)
- Fix use of alternatives to find JDIR (Jarod Wilson)
- Store ids for events with their own cpus when synthesizing user
level event details (scale, unit, etc) events, fixing a crash
when recording a PMU event with a cpumask defined (Jiri Olsa)
- Fix wrong filter_band* values for uncore Intel vendor events (Jiri Olsa)
- Fix detection of tracefs path in systems without tracefs, where
that path should be the debugfs mountpoint plus "/tracing/" (Jiri Olsa)
- Pass build flags to traceevent build, allowing using alternative
flags in distro packages, RPM, for instance (Jiri Olsa)
- Fix 'perf report' crash on invalid inline debug information (Milian Wolff)
- Synch kvm uapi copies (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCW8eytQAKCRCyPKLppCJ+
Jz94AP9Ra7FFmnMuffimP5pIkUacfqkLXPG3Lymxa8+pm0FH6gD/cWUZCxNdchBN
v4zFXT1i9iR2YCKu8/1iijVx2wtpZQw=
=Dh50
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-4.19-20181017' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Stop falling back to kallsyms for vDSO symbols lookup, this wasn't
being really used and is not valid in arches such as Sparc, where
user and kernel space don't share the address space, relying only on
cpumode to figure out what DSOs to lookup (Arnaldo Carvalho de Melo)
- Align CPU map synthesized events properly, fixing SIGBUS in
CPUs like Sparc (David Miller)
- Fix use of alternatives to find JDIR (Jarod Wilson)
- Store IDs for events with their own CPUs when synthesizing user
level event details (scale, unit, etc) events, fixing a crash
when recording a PMU event with a cpumask defined (Jiri Olsa)
- Fix wrong filter_band* values for uncore Intel vendor events (Jiri Olsa)
- Fix detection of tracefs path in systems without tracefs, where
that path should be the debugfs mountpoint plus "/tracing/" (Jiri Olsa)
- Pass build flags to traceevent build, allowing using alternative
flags in distro packages, RPM, for instance (Jiri Olsa)
- Fix 'perf report' crash on invalid inline debug information (Milian Wolff)
- Synch KVM UAPI copies (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David reports that:
<quote>
Perf has this hack where it uses the kernel symbol map as a backup when
a symbol can't be found in the user's symbol table(s).
This causes problems because the tests driving this code path use
machine__kernel_ip(), and that is completely meaningless on Sparc. On
sparc64 the kernel and user live in physically separate virtual address
spaces, rather than a shared one. And the kernel lives at a virtual
address that overlaps common userspace addresses. So this test passes
almost all the time when a user symbol lookup fails.
The consequence of this is that, if the unfound user virtual address in
the sample doesn't match up to a kernel symbol either, we trigger things
like this code in builtin-top.c:
if (al.sym == NULL && al.map != NULL) {
const char *msg = "Kernel samples will not be resolved.\n";
/*
* As we do lazy loading of symtabs we only will know if the
* specified vmlinux file is invalid when we actually have a
* hit in kernel space and then try to load it. So if we get
* here and there are _no_ symbols in the DSO backing the
* kernel map, bail out.
*
* We may never get here, for instance, if we use -K/
* --hide-kernel-symbols, even if the user specifies an
* invalid --vmlinux ;-)
*/
if (!machine->kptr_restrict_warned && !top->vmlinux_warned &&
__map__is_kernel(al.map) && map__has_symbols(al.map)) {
if (symbol_conf.vmlinux_name) {
char serr[256];
dso__strerror_load(al.map->dso, serr, sizeof(serr));
ui__warning("The %s file can't be used: %s\n%s",
symbol_conf.vmlinux_name, serr, msg);
} else {
ui__warning("A vmlinux file was not found.\n%s",
msg);
}
if (use_browser <= 0)
sleep(5);
top->vmlinux_warned = true;
}
}
When I fire up a compilation on sparc, this triggers immediately.
I'm trying to figure out what the "backup to kernel map" code is
accomplishing.
I see some language in the current code and in the changes that have
happened in this area talking about vdso. Does that really happen?
The vdso is mapped into userspace virtual addresses, not kernel ones.
More history. This didn't cause problems on sparc some time ago,
because the kernel IP check used to be "ip < 0" :-) Sparc kernel
addresses are not negative. But now with machine__kernel_ip(), which
works using the symbol table determined kernel address range, it does
trigger.
What it all boils down to is that on architectures like sparc,
machine__kernel_ip() should always return false in this scenerio, and
therefore this kind of logic:
if (cpumode == PERF_RECORD_MISC_USER && machine &&
mg != &machine->kmaps &&
machine__kernel_ip(machine, al->addr)) {
is basically invalid. PERF_RECORD_MISC_USER implies no kernel address
can possibly match for the sample/event in question (no matter how
hard you try!) :-)
</>
So, I thought something had changed and in the past we would somehow
find that address in the kallsyms, but I couldn't find anything to back
that up, the patch introducing this is over a decade old, lots of things
changed, so I was just thinking I was missing something.
I tried a gtod busy loop to generate vdso activity and added a 'perf
probe' at that branch, on x86_64 to see if it ever gets hit:
Made thread__find_map() noinline, as 'perf probe' in lines of inline
functions seems to not be working, only at function start. (Masami?)
# perf probe -x ~/bin/perf -L thread__find_map:57
<thread__find_map@/home/acme/git/perf/tools/perf/util/event.c:57>
57 if (cpumode == PERF_RECORD_MISC_USER && machine &&
58 mg != &machine->kmaps &&
59 machine__kernel_ip(machine, al->addr)) {
60 mg = &machine->kmaps;
61 load_map = true;
62 goto try_again;
}
} else {
/*
* Kernel maps might be changed when loading
* symbols so loading
* must be done prior to using kernel maps.
*/
69 if (load_map)
70 map__load(al->map);
71 al->addr = al->map->map_ip(al->map, al->addr);
# perf probe -x ~/bin/perf thread__find_map:60
Added new event:
probe_perf:thread__find_map (on thread__find_map:60 in /home/acme/bin/perf)
You can now use it in all perf tools, such as:
perf record -e probe_perf:thread__find_map -aR sleep 1
#
Then used this to see if, system wide, those probe points were being hit:
# perf trace -e *perf:thread*/max-stack=8/
^C[root@jouet ~]#
No hits when running 'perf top' and:
# cat gtod.c
#include <sys/time.h>
int main(void)
{
struct timeval tv;
while (1)
gettimeofday(&tv, 0);
return 0;
}
[root@jouet c]# ./gtod
^C
Pressed 'P' in 'perf top' and the [vdso] samples are there:
62.84% [vdso] [.] __vdso_gettimeofday
8.13% gtod [.] main
7.51% [vdso] [.] 0x0000000000000914
5.78% [vdso] [.] 0x0000000000000917
5.43% gtod [.] _init
2.71% [vdso] [.] 0x000000000000092d
0.35% [kernel] [k] native_io_delay
0.33% libc-2.26.so [.] __memmove_avx_unaligned_erms
0.20% [vdso] [.] 0x000000000000091d
0.17% [i2c_i801] [k] i801_access
0.06% firefox [.] free
0.06% libglib-2.0.so.0.5400.3 [.] g_source_iter_next
0.05% [vdso] [.] 0x0000000000000919
0.05% libpthread-2.26.so [.] __pthread_mutex_lock
0.05% libpixman-1.so.0.34.0 [.] 0x000000000006d3a7
0.04% [kernel] [k] entry_SYSCALL_64_trampoline
0.04% libxul.so [.] style::dom_apis::query_selector_slow
0.04% [kernel] [k] module_get_kallsym
0.04% firefox [.] malloc
0.04% [vdso] [.] 0x0000000000000910
I added a 'perf probe' to thread__find_map:69, and that surely got tons
of hits, i.e. for every map found, just to make sure the 'perf probe'
command was really working.
In the process I noticed a bug, we're only have records for '[vdso]' for
pre-existing commands, i.e. ones that are running when we start 'perf top',
when we will generate the PERF_RECORD_MMAP by looking at /perf/PID/maps.
I.e. like this, for preexisting processes with a vdso map, again,
tracing for all the system, only pre-existing processes get a [vdso] map
(when having one):
[root@jouet ~]# perf probe -x ~/bin/perf __machine__addnew_vdso
Added new event:
probe_perf:__machine__addnew_vdso (on __machine__addnew_vdso in /home/acme/bin/perf)
You can now use it in all perf tools, such as:
perf record -e probe_perf:__machine__addnew_vdso -aR sleep 1
[root@jouet ~]# perf trace -e probe_perf:__machine__addnew_vdso/max-stack=8/
0.000 probe_perf:__machine__addnew_vdso:(568eb3)
__machine__addnew_vdso (/home/acme/bin/perf)
map__new (/home/acme/bin/perf)
machine__process_mmap2_event (/home/acme/bin/perf)
machine__process_event (/home/acme/bin/perf)
perf_event__process (/home/acme/bin/perf)
perf_tool__process_synth_event (/home/acme/bin/perf)
perf_event__synthesize_mmap_events (/home/acme/bin/perf)
__event__synthesize_thread (/home/acme/bin/perf)
The kernel is generating a PERF_RECORD_MMAP for vDSOs, but somehow
'perf top' is not getting those records while 'perf record' is:
# perf record ~acme/c/gtod
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.076 MB perf.data (1499 samples) ]
# perf report -D | grep PERF_RECORD_MMAP2
71293612401913 0x11b48 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x400000(0x1000) @ 0 fd:02 1137 541179306]: r-xp /home/acme/c/gtod
71293612419012 0x11be0 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x7fa4a2783000(0x227000) @ 0 fd:00 3146370 854107250]: r-xp /usr/lib64/ld-2.26.so
71293612432110 0x11c50 [0x60]: PERF_RECORD_MMAP2 25484/25484: [0x7ffcdb53a000(0x2000) @ 0 00:00 0 0]: r-xp [vdso]
71293612509944 0x11cb0 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x7fa4a23cd000(0x3b6000) @ 0 fd:00 3149723 262067164]: r-xp /usr/lib64/libc-2.26.so
#
# perf script | grep vdso | head
gtod 25484 71293.612768: 2485554 cycles:ppp: 7ffcdb53a914 [unknown] ([vdso])
gtod 25484 71293.613576: 2149343 cycles:ppp: 7ffcdb53a917 [unknown] ([vdso])
gtod 25484 71293.614274: 1814652 cycles:ppp: 7ffcdb53aca8 __vdso_gettimeofday+0x98 ([vdso])
gtod 25484 71293.614862: 1669070 cycles:ppp: 7ffcdb53acc5 __vdso_gettimeofday+0xb5 ([vdso])
gtod 25484 71293.615404: 1451589 cycles:ppp: 7ffcdb53acc5 __vdso_gettimeofday+0xb5 ([vdso])
gtod 25484 71293.615999: 1269941 cycles:ppp: 7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso])
gtod 25484 71293.616405: 1177946 cycles:ppp: 7ffcdb53a914 [unknown] ([vdso])
gtod 25484 71293.616775: 1121290 cycles:ppp: 7ffcdb53ac47 __vdso_gettimeofday+0x37 ([vdso])
gtod 25484 71293.617150: 1037721 cycles:ppp: 7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso])
gtod 25484 71293.617478: 994526 cycles:ppp: 7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso])
#
The patch is the obvious one and with it we also continue to resolve
vdso symbols for pre-existing processes in 'perf top' and for all
processes in 'perf record' + 'perf report/script'.
Suggested-by: David Miller <davem@davemloft.net>
Acked-by: David Miller <davem@davemloft.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-cs7skq9pp0kjypiju6o7trse@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow the unit tests to verify the retrieval of the dirty shutdown
count via smart commands, and allow the driver-load-time retrieval of
the smart health payload to be simulated by nfit_test.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Some NVDIMMs, in addition to providing an indication of whether the
previous shutdown was clean, also provide a running count of lifetime
dirty-shutdown events for the device. In anticipation of this
functionality appearing on more devices arrange for the nfit driver to
retrieve / cache this data at DIMM discovery time, and export it via
sysfs.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The per-VM capability KVM_CAP_EXCEPTION_PAYLOAD (to be introduced in a
later commit) adds the following fields to struct kvm_vcpu_events:
exception_has_payload, exception_payload, and exception.pending.
With this capability set, all of the details of vcpu->arch.exception,
including the payload for a pending exception, are reported to
userspace in response to KVM_GET_VCPU_EVENTS.
With this capability clear, the original ABI is preserved, and the
exception.injected field is set for either pending or injected
exceptions.
When userspace calls KVM_SET_VCPU_EVENTS with
KVM_CAP_EXCEPTION_PAYLOAD clear, exception.injected is no longer
translated to exception.pending. KVM_SET_VCPU_EVENTS can now only
establish a pending exception when KVM_CAP_EXCEPTION_PAYLOAD is set.
Reported-by: Jim Mattson <jmattson@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add tests that do a MSG_PEEK recv followed by a regular receive to
test flag support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Modify test library and add eVMCS test. This includes nVMX save/restore
testing.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
