By setting compression for a defrag task, the task will start IO at
the end of defrag.
After the combo of filemap_flush(), we've already made sure that
dirty pages have made progress via async compress thread because the
second filemap_flush() will wait for page lock, which won't be
unlocked until those pages have been marked as writeback and ordered
extents have been queued.
And this is for per-inode defrag, it's not helpful to wait on a global
%async_delalloc_pages and %nr_async_submits from fs_info.
Although waiting on %nr_async_submits means that all bios are
submitted down to per-device schedule IO lists, it doesn't wait for
their completions, thus users still need to do fsync/sync to make sure
the data is on disk. While with this change, it makes sure that pages
are marked with writeback bits and will be submitted asynchronously
shortly, therefore, the behavior of defrag option '-c' remains unchanged.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This was intended to congest higher layers to not send bios, but as
1) the congested bit has been taken by writeback
Async bios come from buffered writes and DIO writes.
For DIO writes, we want to submit them ASAP, while for buffered writes,
writeback uses balance_dirty_pages() to throttle how much dirty pages we
can have.
2) and no one is waiting for %nr_async_bios down to zero,
Historically, it was introduced along with changes which let
checksumming workload spread accross different cpus. And at that time,
pdflush was used instead of per-bdi flushing, perhaps pdflush did not
have the necessary information for writeback to do throttling.
We can safely remove them now.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
[ additional explanation from mails, removed unused variable 'limit' ]
Signed-off-by: David Sterba <dsterba@suse.com>
Output the invalid member name and its bad value, along with its
expected value range or alignment.
Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Output the bad value and expected good value (or its alignment).
Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
[ unindent long strings ]
Signed-off-by: David Sterba <dsterba@suse.com>
Enhance the output to print:
1) the eason
2) the ad value, if reason is not sufficient
3) good value (range)
Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
[ wording, unidented long strings ]
Signed-off-by: David Sterba <dsterba@suse.com>
Use inline function to replace macro since we don't need
stringification.
(Macro still exists until all callers get updated)
And add more info about the error, and replace EIO with EUCLEAN.
For nr_items error, report if it's too large or too small, and output
the valid value range.
For node block pointer, added a new alignment checker.
For key order, also output the next key to make the problem more
obvious.
Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
[ wording adjustments, unindented long strings ]
Signed-off-by: David Sterba <dsterba@suse.com>
It's no doubt the comprehensive tree block checker will become larger,
so moving them into their own files is quite reasonable.
Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
[ wording adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Remove dead assigment of num_bytes.
Also as num_bytes only used in the will_compress block as copy of
total_in just replace that with total_in and drop num_bytes entirely.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit a53f4f8e9c ("btrfs: Don't call btrfs_start_transaction() on
frozen fs to avoid deadlock.") started using internal calls and we
replace them with more suitable ones.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently struct names for sysfs are generated only based on the
attribute names. This means that attribute names cannot be reused in
multiple places throughout the complete btrfs sysfs hierarchy.
E.g. allocation/data/total_bytes and allocation/data/single/total_bytes
result in the same struct name btrfs_attr_total_bytes. A workaround for
this case was made in the past by ad hoc creating an extra macro
wrapper, BTRFS_RAID_ATTR, that inserts some extra text in the struct
name.
Instead of polluting sysfs.h with such kind of extra macro definitions,
and only doing so when there are collisions, use a prefix which gets
inserted in the struct name, so we keep everything nicely grouped
together by default.
Current collections of attributes are:
* (the toplevel, empty prefix)
* allocation
* space_info
* raid
* features
Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Bool initializations should use true and false. Bool tests don't need
comparisons.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If btrfs_transaction_commit fails it will proceed to call
cleanup_transaction, which in turn already does btrfs_abort_transaction.
So let's remove the unnecessary code duplication. Also let's be explicit
about handling failure of btrfs_uuid_tree_add by calling
btrfs_end_transaction.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_udpate_root can fail and it aborts the transaction, the correct
way to handle an aborted transaction is to explicitly end with
btrfs_end_transaction. Even now the code is correct since
btrfs_commit_transaction would handle an aborted transaction but this is
more of an implementation detail. So let's be explicit in handling
failure in btrfs_update_root.
Furthermore btrfs_commit_transaction can also fail and by ignoring it's
return value we could have left the in-memory copy of the root item in
an inconsistent state. So capture the error value which allows us to
correctly revert the RO/RW flags in case of commit failure.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_init_new_device() calls btrfs_attach_transaction() to
commit sys chunks, and it should error out if it fails.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of BUG_ON return error to the caller. And handle the fail
condition by calling the abort transaction and going through the
error path.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When new device is being added to seed FS, seed FS is marked writable,
but when we fail to bring in the new device, we missed to undo the
writable part. This patch fixes it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
EXTENT_CSUM checker is a relatively easy one, only needs to check:
1) Objectid
Fixed to BTRFS_EXTENT_CSUM_OBJECTID
2) Key offset alignment
Must be aligned to sectorsize
3) Item size alignedment
Must be aligned to csum size
Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add extra checks for item with EXTENT_DATA type. This checks the
following thing:
0) Key offset
All key offsets must be aligned to sectorsize.
Inline extent must have 0 for key offset.
1) Item size
Uncompressed inline file extent size must match item size.
(Compressed inline file extent has no information about its on-disk size.)
Regular/preallocated file extent size must be a fixed value.
2) Every member of regular file extent item
Including alignment for bytenr and offset, possible value for
compression/encryption/type.
3) Type/compression/encode must be one of the valid values.
This should be the most comprehensive and strict check in the context
of btrfs_item for EXTENT_DATA.
Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ switch to BTRFS_FILE_EXTENT_TYPES, similar to what
BTRFS_COMPRESS_TYPES does ]
Signed-off-by: David Sterba <dsterba@suse.com>
Function check_leaf() checks if any item pointer points outside of the
leaf, but it doesn't check if the pointer overlaps with the item itself.
Normally only the last item may be the victim, but adding such check is
never a bad idea anyway.
Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Current check_leaf() function does a good job checking key order and
item offset/size.
However it only checks from slot 0 to the last but one slot, this is
good but makes later expansion hard.
So this refactoring iterates from slot 0 to the last slot.
For key comparison, it uses a key with all 0 as initial key, so all
valid keys should be larger than that.
And for item size/offset checks, it compares current item end with
previous item offset.
For slot 0, use leaf end as a special case.
This makes later item/key offset checks and item size checks easier to
be implemented.
Also, makes check_leaf() to return -EUCLEAN other than -EIO to indicate
error.
Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Was added in:
c8b978188c
"Btrfs: Add zlib compression support"
Survive to near time (from 08.10.2008).
Because 'start' checked for zero before branch, so it's safe to remove
that subtraction.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay reported that generic/273 was failing currently with ENOSPC.
Turns out this is because we get to the point where the outstanding
reservations are greater than the pinned space on the fs. This is a
mistake, previously we used the current reservation amount in
may_commit_transaction, not the entire outstanding reservation amount.
Fix this to find the minimum byte size needed to make progress in
flushing, and pass that into may_commit_transaction. From there we can
make a smarter decision on whether to commit the transaction or not.
This fixes the failure in generic/273.
From Nikolai, IOW: when we go to the final stage of deciding whether to
do trans commit, instead of passing all the reservations from all
tickets we just pass the reservation for the current ticket. Otherwise,
in case all reservations exceed pinned space, then we don't commit
transaction and fail prematurely. Before we passed num_bytes from
flush_space, where num_bytes was the sum of all pending reserverations,
but now all we do is take the first ticket and commit the trans if we
can satisfy that.
Fixes: 957780eb27 ("Btrfs: introduce ticketed enospc infrastructure")
Cc: stable@vger.kernel.org # 4.8
Reported-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
[ added Nikolai's comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
By analyzing the perf on btrfs send, we found it take large amount of
cpu time on page_cache_sync_readahead. This effort can be reduced after
switching to asynchronous one. Overall performance gain on HDD and SSD
were 9 and 15 percent if simply send a large file.
Signed-off-by: Kuanling Huang <peterh@synology.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The local bio_list may have pending bios when doing cleanup, it can
end up with memory leak if they don't get freed.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Don't populate the read-only array types on the stack, instead make
it static const. Makes the object code smaller by nearly 60 bytes:
Before:
text data bss dec hex filename
90536 6552 64 97152 17b80 fs/btrfs/ioctl.o
After:
text data bss dec hex filename
90414 6616 64 97094 17b46 fs/btrfs/ioctl.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Forward the correct return value -ENOMEM from btrfsic_dev_state_alloc()
too.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ adjust changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
We've seen the following backtrace stack in ftrace or dmesg log,
kworker/u16:10-4244 [000] 241942.480955: function: btrfs_put_ordered_extent
kworker/u16:10-4244 [000] 241942.480956: kernel_stack: <stack trace>
=> finish_ordered_fn (ffffffffa0384475)
=> btrfs_scrubparity_helper (ffffffffa03ca577) <-----"incorrect"
=> btrfs_freespace_write_helper (ffffffffa03ca98e) <-----"correct"
=> process_one_work (ffffffff81117b2f)
=> worker_thread (ffffffff81118c2a)
=> kthread (ffffffff81121de0)
=> ret_from_fork (ffffffff81d7087a)
btrfs_freespace_write_helper is actually calling normal_worker_helper
instead of btrfs_scrubparity_helper, so somehow kernel has parsed the
incorrect function address while unwinding the stack,
btrfs_scrubparity_helper really shouldn't be shown up.
It's caused by compiler doing inline for our helper function, adding a
noinline tag can fix that.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ use noinline_for_stack ]
Signed-off-by: David Sterba <dsterba@suse.com>
Since both committing transaction and writing log-tree are doing
plugging on metadata IO, we can unify to use %sync_writers to benefit
both cases, instead of checking bio_flags while writing meta blocks of
log-tree.
We can remove this bio_flags because in order to write dirty blocks,
log tree also uses btrfs_write_marked_extents(), inside which we
have enabled %sync_writers, therefore, every write goes in a
synchronous way, so does checksuming.
Please also note that, bio_flags is applied per-context while
%sync_writers is applied per-inode, so this might incur some overhead, ie.
1) while log tree is flushing its dirty blocks via
btrfs_write_marked_extents(), in which %sync_writers is increased
by one.
2) in the meantime, some writeback operations may happen upon btrfs's
metadata inode, so these writes go synchronously, too.
However, AFAICS, the overhead is not a big one while the win is that
we unify the two places that needs synchronous way and remove a
special hack/flag.
This removes the bio_flags related stuff for writing log-tree.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have started plug in btrfs_write_and_wait_marked_extents() but the
generated IOs actually go to device's schedule IO list where the work
is doing in another task, thus the started plug doesn't make any
sense.
And since we wait for IOs immediately after writing meta blocks, it's
the same case as writing log tree, doing sync submit can merge more
IOs.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are checks on fs_info in __btrfs_panic to avoid dereferencing a
null fs_info, however, there is a call to btrfs_crit that may also
dereference a null fs_info. Fix this by adding a check to see if fs_info
is null and only print the s_id if fs_info is non-null.
Detected by CoverityScan CID#401973 ("Dereference after null check")
Fixes: efe120a067 ("Btrfs: convert printk to btrfs_ and fix BTRFS prefix")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The value of variable 'can_recover' is never used after being set, thus
it should be removed, as it was never used since the first commit
68a7342c51 ("Btrfs: cleanup orphaned root orphan item").
Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If 'btrfs_alloc_path()' fails, we must free the resources already
allocated, as done in the other error handling paths in this function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__link_block_group is called from only 2 places and at each call site the
space_info being passed is the same as the space info assigned to the passed
cache struct. Let's remove the redundant argument and make the function
reference the space_info from the passed block_group_cache. No functional
changes
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ renamed to link_block_group ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the code executes add_extent_mapping and if it is successful
it links the new mapping, it then proceeds to unlock the extent mapping
tree and check for failure and handle them. Instead, rework the code to
only perform a single check if add_extent_mapping has failed and handle
it, otherwise the code continues in a linear fashion. No functional
changes
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduced by 5a5f79b570 ("Btrfs: allow unaligned DIO") and never
used. The buffered fallback from unaligned DIO works as expected.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_changed_cb_t represents the signature of the callback being passed
to btrfs_compare_trees. Currently there is only one such callback,
namely changed_cb in send.c. This function doesn't really uses the first
2 parameters, i.e. the roots. Since there are not other functions
implementing the btrfs_changed_cb_t let's remove the unused parameters
from the prototype and implementation.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
iterate_dir_item:found_key - introduced in 31db9f7c23 ("Btrfs:
introduce BTRFS_IOC_SEND for btrfs send/receive"), yet never used.
record_ref:num - ditto
This is a first pass with the low-hanging fruit. There are still quite a
few unsued parameters in some function which have to abide by a callback
interface.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Src was initially part of 31ff1cd25d ("Btrfs: Copy into the log tree in
big batches"), however 16e7549f04 ("Btrfs: incompatible format change
to remove hole extents") changed parameters passed to copy_items which
made the src variable redundant.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While we submit direct writes, if the inode is flagged with nodatasum,
there's no benefit to submit asynchronously, because
a) we don't have to calculate checksum across processors,
b) and direct IO has started a plug, but async submit makes us queue
IO on each device's scheduled IO list instead of DIO's plug list, so
that IOs get much less merges in general.
Lets use sync submit for nodatasum inodes.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After mapping block with BTRFS_MAP_WRITE, parities have been sorted to
the end position, so this search can start from the first parity
stripe.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copied changelog as a comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
We didn't copy fsid to struct super_block.s_uuid so Overlay disables
index feature with btrfs as the lower FS.
kernel: overlayfs: fs on '/lower' does not support file handles, falling back to index=off.
Fix this by publishing the fsid through struct super_block.s_uuid.
[ dsterba: I think that setting s_uuid is the last missing bit. Overlay
needs the file handle encoding support from the lower filesystem, which
is supported. Filling the whole filesystem id is correct, the subvolume
id is encoded in the file handle buffer from inside btrfs_encode_fh. ]
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These aren't used outside of volumes.c.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some static functions are needlessly forward declared. Let's remove those
declarations since they add no value.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Both wait_for_commit() and wait_for_writer() are checking the
condition out of the mutex lock.
This refactors code a bit to be lock safe.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since TASK_UNINTERRUPTIBLE has been used here, wait_event() can do the
same job.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we're still going to wait after schedule(), we don't have to do
finish_wait() to remove our %wait_queue_entry since prepare_to_wait()
won't add the same %wait_queue_entry twice.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Block layer has a limit on plug, ie. BLK_MAX_REQUEST_COUNT == 16, so
we don't gain benefits by batching 64 bios here.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8LHe
-----END PGP SIGNATURE-----
Merge tag '4.14-smb3-fixes-for-stable' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Various SMB3 fixes for 4.14 and stable"
* tag '4.14-smb3-fixes-for-stable' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: Validate negotiate request must always be signed
SMB: fix validate negotiate info uninitialised memory use
SMB: fix leak of validate negotiate info response buffer
CIFS: Fix NULL pointer deref on SMB2_tcon() failure
CIFS: do not send invalid input buffer on QUERY_INFO requests
cifs: Select all required crypto modules
CIFS: SMBD: Fix the definition for SMB2_CHANNEL_RDMA_V1_INVALIDATE
cifs: handle large EA requests more gracefully in smb2+
Fix encryption labels and lengths for SMB3.1.1
