Current error behaviour for ext2 and ext3 filesystems does not fully
correspond to the documentation and should be fixed.
According to man 8 mount, ext2 and ext3 file systems allow to set one of 3
different on-errors behaviours:
---- start of quote man 8 mount ----
errors=continue / errors=remount-ro / errors=panic
Define the behaviour when an error is encountered. (Either ignore
errors and just mark the file system erroneous and continue, or remount
the file system read-only, or panic and halt the system.) The default is
set in the filesystem superblock, and can be changed using tune2fs(8).
---- end of quote ----
However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus
ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect
handle of errors on ext3.
Then we've checked corresponding code in ext2 and discovered that it is buggy
as well:
- EXT2_ERRORS_CONTINUE is not read from the superblock (the same);
- parse_option() does not clean the alternative values and thus something
like (ERRORS_CONT|ERRORS_RO) can be set;
- if options are omitted, parse_option() does not set any of these options.
Therefore it is possible to set any combination of these options on the ext2:
- none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount
options;
- any of them may be set using mount options;
- 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the
superblock and other value in mount options;
- and finally all three options may be set by adding third option in remount.
Currently ext2 uses these values only in ext2_error() and it is not leading to
any noticeable troubles. However somebody may be discouraged when he will try
to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in
mount options.
This patch:
EXT2_ERRORS_CONTINUE should be read from the superblock as default value for
error behaviour. parse_option() should clean the alternative options and
should not change default value taken from the superblock.
Signed-off-by: Vasily Averin <vvs@sw.ru>
Acked-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Current error behaviour for ext2 and ext3 filesystems does not fully
correspond to the documentation and should be fixed.
According to man 8 mount, ext2 and ext3 file systems allow to set one of 3
different on-errors behaviours:
---- start of quote man 8 mount ----
errors=continue / errors=remount-ro / errors=panic
Define the behaviour when an error is encountered. (Either ignore
errors and just mark the file system erroneous and continue, or remount
the file system read-only, or panic and halt the system.) The default is
set in the filesystem superblock, and can be changed using tune2fs(8).
---- end of quote ----
However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus
ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect
handle of errors on ext3.
Then we've checked corresponding code in ext2 and discovered that it is buggy
as well:
- EXT2_ERRORS_CONTINUE is not read from the superblock (the same);
- parse_option() does not clean the alternative values and thus something
like (ERRORS_CONT|ERRORS_RO) can be set;
- if options are omitted, parse_option() does not set any of these options.
Therefore it is possible to set any combination of these options on the ext2:
- none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount
options;
- any of them may be set using mount options;
- 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the
superblock and other value in mount options;
- and finally all three options may be set by adding third option in remount.
Currently ext2 uses these values only in ext2_error() and it is not leading to
any noticeable troubles. However somebody may be discouraged when he will try
to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in
mount options.
This patch:
EXT3_ERRORS_CONTINUE should be taken from the superblock as default value for
error behaviour.
Signed-off-by: Dmitry Mishin <dim@openvz.org>
Acked-by: Vasily Averin <vvs@sw.ru>
Acked-by: Kirill Korotaev <dev@openvz.org>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If grow_buffers() is for some reason passed a block number which wants to lie
outside the maximum-addressable pagecache range (PAGE_SIZE * 4G bytes) then it
will accidentally truncate `index' and will then instnatiate a page at the
wrong pagecache offset. This causes __getblk_slow() to go into an infinite
loop.
This can happen with corrupted disks, or with software errors elsewhere.
Detect that, and handle it.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Implement the epoll_pwait system call, that extend the event wait mechanism
with the same logic ppoll and pselect do. The definition of epoll_pwait
is:
int epoll_pwait(int epfd, struct epoll_event *events, int maxevents,
int timeout, const sigset_t *sigmask, size_t sigsetsize);
The difference between the vanilla epoll_wait and epoll_pwait is that the
latter allows the caller to specify a signal mask to be set while waiting
for events. Hence epoll_pwait will wait until either one monitored event,
or an unmasked signal happen. If sigmask is NULL, the epoll_pwait system
call will act exactly like epoll_wait. For the POSIX definition of
pselect, information is available here:
http://www.opengroup.org/onlinepubs/009695399/functions/select.html
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Someone's tab key is emitting spaces. Attempt to repair some of the damage.
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Current error behaviour for ext2 and ext3 filesystems does not fully
correspond to the documentation and should be fixed.
According to man 8 mount, ext2 and ext3 file systems allow to set one of 3
different on-errors behaviours:
---- start of quote man 8 mount ----
errors=continue / errors=remount-ro / errors=panic
Define the behaviour when an error is encountered. (Either ignore
errors and just mark the file system erroneous and continue, or remount
the file system read-only, or panic and halt the system.) The default is
set in the filesystem superblock, and can be changed using tune2fs(8).
---- end of quote ----
However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus
ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect
handle of errors on ext3.
Then we've checked corresponding code in ext2 and discovered that it is buggy
as well:
- EXT2_ERRORS_CONTINUE is not read from the superblock (the same);
- parse_option() does not clean the alternative values and thus something
like (ERRORS_CONT|ERRORS_RO) can be set;
- if options are omitted, parse_option() does not set any of these options.
Therefore it is possible to set any combination of these options on the ext2:
- none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount
options;
- any of them may be set using mount options;
- 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the
superblock and other value in mount options;
- and finally all three options may be set by adding third option in remount.
Currently ext2 uses these values only in ext2_error() and it is not leading to
any noticeable troubles. However somebody may be discouraged when he will try
to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in
mount options.
This patch:
EXT4_ERRORS_CONTINUE should be taken from the superblock as default value for
error behaviour.
Signed-off-by: Dmitry Mishin <dim@openvz.org>
Acked-by: Vasily Averin <vvs@sw.ru>
Acked-by: Kirill Korotaev <dev@openvz.org>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I assume this means "logical sb block". So call it that.
I still don't understand the name though. A block is a block. What's
different about this one?
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With CONFIG_LBD=n, sector_div() expands to a plain old divide. But ext4 is
_not_ passing in a sector_t as the first argument, so...
fs/built-in.o: In function `ext4_get_group_no_and_offset':
fs/ext4/balloc.c:39: undefined reference to `__umoddi3'
fs/ext4/balloc.c:41: undefined reference to `__udivdi3'
fs/built-in.o: In function `find_group_orlov':
fs/ext4/ialloc.c:278: undefined reference to `__udivdi3'
fs/built-in.o: In function `ext4_fill_super':
fs/ext4/super.c:1488: undefined reference to `__udivdi3'
fs/ext4/super.c:1488: undefined reference to `__umoddi3'
fs/ext4/super.c:1594: undefined reference to `__udivdi3'
fs/ext4/super.c:1601: undefined reference to `__umoddi3'
Fix that up by calling do_div() directly.
Also cast the arg to u64. do_div() is only defined on u64, and ext4_fsblk_t
is supposed to be opaque.
Note especially the changes to find_group_orlov(). It was attempting to do
do_div(int, unsigned long long);
which is royally screwed up. Switched it to plain old divide.
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
move '_hi' bits of block numbers in the larger part of the
block group descriptor structure
Signed-off-by: Alexandre Ratchov <alexandre.ratchov@bull.net>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Similar to ext4, change blocks in JBD2 from sector_t to unsigned long long.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Previously when in-kernel ext4 block type is sector_t, it's only 4 bits long
under some 32bit arch (when CONFIG_LBD is not on). So we need to check the
size of sector_t before we read 48bit long on-disk blocks to in-kernel blocks.
These checks are unnecessary now as we changed the in-kernel blocks to
unsigned longlong.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change ext4 in-kernel block type (ext4_fsblk_t) from sector_t to unsigned
long long. Remove ext4 block type string micro E3FSBLK, replaced with "%llu"
[akpm@osdl.org: build fix]
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
As we are planning to support 48-bit block numbers for ext4, we need to
support 48-bit block numbers for extended attributes. In the short term, we
can do this by reuse (on-disk) 16-bit padding (linux2.i_pad1 currently used
only by "hurd") as high order bits for xattr. This patch basically does that.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
JBD layer in-kernel block varibles type fixes to support >32 bit block number
and convert to sector_t type.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Here is the patch to JBD to handle 64 bit block numbers, originally from Zach
Brown. This patch is useful only after adding support for 64-bit block
numbers in the filesystem.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make it possible to add file preallocation support in future as an RO_COMPAT
feature by recognizing uninitialized extents as holes and limiting extent
length to keep the top bit of ee_len free for marking uninitialized extents.
Signed-off-by: Suparna Bhattacharya <suparna@in.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Alex Tomas <alex@clusterfs.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Redefine ext3 in-kernel filesystem block type (ext3_fsblk_t) from unsigned
long to sector_t, to allow kernel to handle >32 bit ext3 blocks.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
On disk extents format:
/*
* this is extent on-disk structure
* it's used at the bottom of the tree
*/
struct ext3_extent {
__le32 ee_block; /* first logical block extent covers */
__le16 ee_len; /* number of blocks covered by extent */
__le16 ee_start_hi; /* high 16 bits of physical block */
__le32 ee_start; /* low 32 bigs of physical block */
};
Signed-off-by: Alex Tomas <alex@clusterfs.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Reworked from a patch by Mingming Cao and Randy Dunlap
Signed-off-By: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
jbd and jbd2 currently use the same slab names which must be unique. The
patch below just renames jbd2's slabs.
Signed-off-by: Johann Lombardi <johann.lombardi@bull.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mingming Cao originally did this work, and Shaggy reproduced it using some
scripts from her.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is a simple copy of the files in fs/jbd to fs/jbd2 and
/usr/incude/linux/[ext4_]jbd.h to /usr/include/[ext4_]jbd2.h
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Originally part of a patch from Mingming Cao and Randy Dunlap. Reorganized
by Shaggy.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mingming Cao<cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mingming Cao originally did this work, and Shaggy reproduced it using some
scripts from her.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Start of the ext4 patch series. See Documentation/filesystems/ext4.txt for
details.
This is a simple copy of the files in fs/ext3 to fs/ext4 and
/usr/incude/linux/ext3* to /usr/include/ex4*
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
commit fe1668ae5b causes kernel to oops with
libhugetlbfs test suite. The problem is that hugetlb pages can be shared
by multiple mappings. Multiple threads can fight over page->lru in the
unmap path and bad things happen. We now serialize __unmap_hugepage_range
to void concurrent linked list manipulation. Such serialization is also
needed for shared page table page on hugetlb area. This patch will fixed
the bug and also serve as a prepatch for shared page table.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since commit d1807793e1 we dereference a NULL
pointer. Coverity id #1432. We set journal to NULL, and use it directly
afterwards.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
split the data structures that exist in host- and disk-endian variants,
annotate the fields of disk-endian ones, propagate changes.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
pulled includes of endian.h from fs/befs/*.c to befs.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This was triggered, but not the fault of, the dirty page accounting
patches. Suitable for -stable as well, after it goes upstream.
Unable to handle kernel NULL pointer dereference at virtual address 0000004c
EIP is at _spin_lock+0x12/0x66
Call Trace:
[<401766e7>] __set_page_dirty_buffers+0x15/0xc0
[<401401e7>] set_page_dirty+0x2c/0x51
[<40140db2>] set_page_dirty_balance+0xb/0x3b
[<40145d29>] __do_fault+0x1d8/0x279
[<40147059>] __handle_mm_fault+0x125/0x951
[<401133f1>] do_page_fault+0x440/0x59f
[<4034d0c1>] error_code+0x39/0x40
[<08048a33>] 0x8048a33
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch moves code out of fs/xattr.c:listxattr into a new function -
vfs_listxattr. The code for vfs_listxattr was originally submitted by Bill
Nottingham <notting@redhat.com> to Unionfs.
Sorry about that. The reason for this submission is to make the
listxattr code in fs/xattr.c a little cleaner (as well as to clean up
some code in Unionfs.)
Currently, Unionfs has vfs_listxattr defined in its code. I think
that's very ugly, and I'd like to see it (re)moved. The logical place
to put it, is along side of all the other vfs_*xattr functions.
Overall, I think this patch is benefitial for both kernel.org kernel and
Unionfs.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We should pass "wait_event_interruptible()" the wait-queue itself, not
the pointer to it. The magic macro will pointerize it internally.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Commit ca4aa09635 fixed waiting for the
structure to get initialised, but it is also possible to break out of
the loop while still in TASK_INTERRUPTIBLE.
Replace the whole thing by wait_event_interruptible, which is much more
readable, and doesn't suffer from these problems.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NFS_CS_INITING > NFS_CS_READY, so instead of waiting for the structure to
get initialised, we currently immediately jump out of the loop without ever
sleeping.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There is some confusion about the meaning of 'bufsz' for a sunrpc server.
In some cases it is the largest message that can be sent or received. In
other cases it is the largest 'payload' that can be included in a NFS
message.
In either case, it is not possible for both the request and the reply to be
this large. One of the request or reply may only be one page long, which
fits nicely with NFS.
So we remove 'bufsz' and replace it with two numbers: 'max_payload' and
'max_mesg'. Max_payload is the size that the server requests. It is used
by the server to check the max size allowed on a particular connection:
depending on the protocol a lower limit might be used.
max_mesg is the largest single message that can be sent or received. It is
calculated as the max_payload, rounded up to a multiple of PAGE_SIZE, and
with PAGE_SIZE added to overhead. Only one of the request and reply may be
this size. The other must be at most one page.
Cc: Greg Banks <gnb@sgi.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* git://git.infradead.org/~dhowells/irq-2.6:
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
IRQ: Typedef the IRQ handler function type
IRQ: Typedef the IRQ flow handler function type
The UDF filesystem can't be mounted in read-write mode any more,
because of forgotten braces.
Signed-off-by: Peter Osterlund <petero2@telia.com>
[ Duh! ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* master.kernel.org:/pub/scm/linux/kernel/git/davej/configh:
Remove all inclusions of <linux/config.h>
Manually resolved trivial path conflicts due to removed files in
the sound/oss/ subdirectory.
* master.kernel.org:/pub/scm/linux/kernel/git/willy/parisc-2.6: (41 commits)
[PARISC] Kill wall_jiffies use
[PARISC] Honour "panic_on_oops" sysctl
[PARISC] Fix fs/binfmt_som.c
[PARISC] Export clear_user_page to modules
[PARISC] Make DMA routines more stubby
[PARISC] Define pci_get_legacy_ide_irq
[PARISC] Fix CONFIG_DEBUG_SPINLOCK
[PARISC] Fix HPUX compat compile with current GCC
[PARISC] Fix iounmap compile warning
[PARISC] Add support for Quicksilver AGPGART
[PARISC] Move LBA and SBA register defines to the common ropes.h
[PARISC] Create shared <asm/ropes.h> header
[PARISC] Stash the lba_device in its struct device drvdata
[PARISC] Generalize IS_ASTRO et al to take a parisc_device like
[PARISC] Pretty print the name of the lba type on kernel boot
[PARISC] Remove some obsolete comments and I checked that Reo is similar to Ike
[PARISC] Add hardware found in the rp8400
[PARISC] Allow nested interrupts
[PARISC] Further updates to timer_interrupt()
[PARISC] remove halftick and copy clocktick to local var (gcc can optimize usage)
...
eCryptfs is a stacked cryptographic filesystem for Linux. It is derived from
Erez Zadok's Cryptfs, implemented through the FiST framework for generating
stacked filesystems. eCryptfs extends Cryptfs to provide advanced key
management and policy features. eCryptfs stores cryptographic metadata in the
header of each file written, so that encrypted files can be copied between
hosts; the file will be decryptable with the proper key, and there is no need
to keep track of any additional information aside from what is already in the
encrypted file itself.
[akpm@osdl.org: updates for ongoing API changes]
[bunk@stusta.de: cleanups]
[akpm@osdl.org: alpha build fix]
[akpm@osdl.org: cleanups]
[tytso@mit.edu: inode-diet updates]
[pbadari@us.ibm.com: generic_file_*_read/write() interface updates]
[rdunlap@xenotime.net: printk format fixes]
[akpm@osdl.org: make slab creation and teardown table-driven]
Signed-off-by: Phillip Hellewell <phillip@hellewell.homeip.net>
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Erez Zadok <ezk@cs.sunysb.edu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use all the pieces set up so far to implement referral support, allowing
return of NFS4ERR_MOVED and fs_locations attribute.
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Encode fs_locations attribute.
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Define FS locations structures, some functions to manipulate them, and add
code to parse FS locations in downcall and add to the exports structure.
[bfields@fieldses.org: bunch of fixes and cleanups]
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Store the export path in the svc_export structure instead of storing only the
dentry. This will prevent the need for additional d_path calls to provide
NFSv4 fs_locations support.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There is a possible race in d_splice_alias. Though __d_find_alias(inode, 1)
will only return a dentry with DCACHE_DISCONNECTED set, it is possible for it
to get cleared before the BUG_ON, and it is is not possible to lock against
that.
There are a couple of problems here. Firstly, the code doesn't match the
comment. The comment describes a 'disconnected' dentry as being IS_ROOT as
well as DCACHE_DISCONNECTED, however there is not testing of IS_ROOT anythere.
A dentry is marked DCACHE_DISCONNECTED when allocated with d_alloc_anon, and
remains DCACHE_DISCONNECTED while a path is built up towards the root. So a
dentry can have a valid name and a valid parent and even grandparent, but will
still be DCACHE_DISCONNECTED until a path to the root is created. Once the
path to the root is complete, everything in the path gets DCACHE_DISCONNECTED
cleared. So the fact that DCACHE_DISCONNECTED isn't enough to say that a
dentry is free to be spliced in with a given name. This can only be allowed
if the dentry does not yet have a name, so the IS_ROOT test is needed too.
However even adding that test to __d_find_alias isn't enough. As
d_splice_alias drops dcache_lock before calling d_move to perform the splice,
it could race with another thread calling d_splice_alias to splice the inode
in with a different name in a different part of the tree (in the case where a
file has hard links). So that splicing code is only really safe for
directories (as we know that directories only have one link). For
directories, the caller of d_splice_alias will be holding i_mutex on the
(unique) parent so there is no room for a race.
A consequence of this is that a non-directory will never benefit from being
spliced into a pre-exisiting dentry, but that isn't a problem. It is
perfectly OK for a non-directory to have multiple dentries, some anonymous,
some not. And the comment for d_splice_alias says that it only happens for
directories anyway.
Signed-off-by: Neil Brown <neilb@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
totalram is measured in pages, not bytes, so PAGE_SHIFT must be used when
trying to find 1/4096 of RAM.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If nlm_lookup_host finds what it is looking for it exits with an extra
reference on the matching 'nsm' structure.
So don't actually count the reference until we are (fairly) sure it is going
to be used.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It is legal to have zero-length NFSv4 acls; they just deny everything.
Also, nfs4_acl_nfsv4_to_posix will always return with pacl and dpacl set on
success, so the caller doesn't need to check this.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There's no need to handle the case where the caller passes in null for pacl or
dpacl; no caller does that, because it would be a dumb thing to do.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We can be a little more flexible about the flags allowed for inheritance (in
particular, we can deal with either the presence or the absence of
INHERIT_ONLY), but we should probably reject other combinations that we don't
understand.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use a different nfsv4->(draft posix) acl mapping which is
1. completely backwards compatible,
2. accepts any nfsv4 acl, and
3. errs on the side of restricting permissions.
In detail:
1. completely backwards compatible: The new mapping produces the
same result on any acl produced by the existing (draft
posix)->nfsv4 mapping; the one exception is that we no longer
attempt to guess the value of the mask by assuming certain denies
represent the mask. Since the server still keeps track of the mask
locally, sequences of chmod's will still be handled fine; the only
thing this will change is sequences of chmod's with intervening
read-modify-writes of the acl. That last case just isn't worth the
trouble and the possible misrepresentations of the user's intent
(if we guess that a certain deny indicates masking is in effect
when it really isn't).
2. accepts any nfsv4 acl: That's not quite true: we still reject
acls that use combinations of inheritance flags that we don't
support. We also reject acls that attempt to explicitly deny
read_acl or read_attributes permissions, or that attempt to deny
write_acl or write_attributes permissions to the owner of the file.
3. errs on the side of restricting permissions: one exception to
this last rule: we totally ignore some bits (write_owner,
synchronize, read_named_attributes, etc.) that are completely alien
to our filesystem semantics, in some cases even if that would mean
ignoring an explicit deny that we have no intention of enforcing.
Excepting that, the posix acl produced should be the most
permissive acl that is not more permissive than the given nfsv4
acl.
And the new code's shorter, too. Neato.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The previous patch enables some minor simplification here.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We could be using more common code in exp_pseudoroot(). This will also
simplify some changes we need to make later.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Both the (recently introduces) nsm_sema and the older f_sema are converted
over.
Cc: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The NFSACL patches introduced support for multiple RPC services listening on
the same transport. However, only the first of these services was registered
with portmapper. This was perfectly fine for nfsacl, as you traditionally do
not want these to show up in a portmapper listing.
The patch below changes the default behavior to always register all services
listening on a given transport, but retains the old behavior for nfsacl
services.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
nlmclnt_recovery would try to force a portmap rebind by setting
host->h_nextrebind to 0. The right thing to do here is to set it to the
current time.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Every NLM call includes the client's NSM state. Currently, the Linux client
always reports 0 - which seems not to cause any problems, but is not what the
protocol says.
This patch exposes the kernel's internal variable to user space via a sysctl,
which can be set at system boot time by statd.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When we send a GRANTED_MSG call, we current copy the NLM cookie provided in
the original LOCK call - because in 1996, some broken clients seemed to rely
on this bug. However, this means the cookies are not unique, so that when the
client's GRANTED_RES message comes back, we cannot simply match it based on
the cookie, but have to use the client's IP address in addition. Which breaks
when you have a multi-homed NFS client.
The X/Open spec explicitly mentions that clients should not expect the same
cookie; so one may hope that any clients that were broken in 1996 have either
been fixed or rendered obsolete.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The way we incremented the NLM cookie in nlmclnt_next_cookie was not thread
safe. This patch changes the counter to an atomic_t
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds the nsm_use_hostnames sysctl and module param. If set, lockd
will use the client's name (as given in the NLM arguments) to find the NSM
handle. This makes recovery work when the NFS peer is multi-homed, and the
reboot notification arrives from a different IP than the original lock calls.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
As a result of previous patches, the loop in nlmsvc_invalidate_all just sets
h_expires for all client/hosts to 0 (though does it in a very complicated
way).
This was possibly meant to trigger early garbage collection but half the time
'0' is in the future and so it infact delays garbage collection.
Pre-aging the 'hosts' is not really needed at this point anyway so we throw
out the loop and nlm_find_client which is no longer needed.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch moves the host destruction code out of nlm_host_gc into a function
of its own.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch makes nlm_traverse{locks,blocks,shares} and friends use a function
pointer rather than a "action" enum.
This function pointer is given two nlm_hosts (one given by the caller, the
other taken from the lock/block/share currently visited), and is free to do
with them as it wants. If it returns a non-zero value, the lockd/block/share
is released.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This changes struct nlm_file and the nlm_files hash table to use a hlist
instead of the home-grown lists.
This allows us to remove f_hash which was only used to find the right hash
chain to delete an entry from.
It also increases the size of the nlm_files hash table from 32 to 128.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch changes the nlm_blocked list to use a list_node instead of
homegrown linked list handling.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Get rid of the home-grown singly linked lists for the nlm_host hash table.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This converts the statd upcalls to use the nsm_handle
This means that we only register each host once with statd, rather than
registering each host/vers/protocol triple.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch makes the SM_NOTIFY handling understand and use the nsm_handle.
To make it a bit clear what is happening:
nlmclent_prepare_reclaim and nlmclnt_finish_reclaim
get open-coded into 'reclaimer'
The result is tidied up.
Then some of that functionality is moved out into nlm_host_rebooted (which
calls nlmclnt_recovery which starts a thread which runs reclaimer).
Also host_rebooted now finds an nsm_handle rather than a host, then then
iterates over all hosts and deals with each host that shares that nsm_handle.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
cleans up some code in lockd/host.c, fixes an error printk and makes it a
fatal BUG if nlmsvc_free_host_resources fails.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch introduces the nsm_handle, which is shared by all nlm_host objects
referring to the same client.
With this patch applied, all nlm_hosts from the same address will share the
same nsm_handle. A future patch will add sharing by name.
Note: this patch changes h_name so that it is no longer guaranteed to be an IP
address of the host. When the host represents an NFS server, h_name will be
the name passed in the mount call. When the host represents a client, h_name
will be the name presented in the lock request received from the client. A
h_name is only used for printing informational messages, this change should
not be significant.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds the peer's hostname (and name length) to all calls to
nlm*_lookup_host functions. A subsequent patch will make use of these (is
requested by a sysctl).
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Common code from nlm4svc_proc_sm_notify and nlmsvc_proc_sm_notify is moved
into a new nlm_host_rebooted.
This is in preparation of a patch that will change the reboot notification
handling entirely.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch moves all checks of the h_monitored flag into the
nsm_monitor/unmonitor functions. A subsequent patch will replace the
mechanism by which we mark a host as being monitored.
There is still one occurence of h_monitored outside of mon.c and that is in
clntlock.c where we respond to a reboot. The subsequent patch will modify
this too.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make the nfsd read-ahead params cache more SMP-friendly by changing the single
global list and lock into a fixed 16-bucket hashtable with per-bucket locks.
This reduces spinlock contention in nfsd_read() on read-heavy workloads on
multiprocessor servers.
Testing was on a 4 CPU 4 NIC Altix using 4 IRIX clients each doing 1K
streaming reads at full line rate. The server had 128 nfsd threads, which
sizes the RA cache at 256 entries, of which only a handful were used. Flat
profiling shows nfsd_read(), including the inlined nfsd_get_raparms(), taking
10.4% of each CPU. This patch drops the contribution from nfsd() to 1.71% for
each CPU.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The max possible is the maximum RPC payload. The default depends on amount of
total memory.
The value can be set within reason as long as no nfsd threads are currently
running. The value can also be ready, allowing the default to be determined
after nfsd has started.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The limit over UDP remains at 32K. Also, make some of the apparently
arbitrary sizing constants clearer.
The biggest change here involves replacing NFSSVC_MAXBLKSIZE by a function of
the rqstp. This allows it to be different for different protocols (udp/tcp)
and also allows it to depend on the servers declared sv_bufsiz.
Note that we don't actually increase sv_bufsz for nfs yet. That comes next.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
.. by allocating the array of 'kvec' in 'struct svc_rqst'.
As we plan to increase RPCSVC_MAXPAGES from 8 upto 256, we can no longer
allocate an array of this size on the stack. So we allocate it in 'struct
svc_rqst'.
However svc_rqst contains (indirectly) an array of the same type and size
(actually several, but they are in a union). So rather than waste space, we
move those arrays out of the separately allocated union and into svc_rqst to
share with the kvec moved out of svc_tcp_recvfrom (various arrays are used at
different times, so there is no conflict).
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We are planning to increase RPCSVC_MAXPAGES from about 8 to about 256. This
means we need to be a bit careful about arrays of size RPCSVC_MAXPAGES.
struct svc_rqst contains two such arrays. However the there are never more
that RPCSVC_MAXPAGES pages in the two arrays together, so only one array is
needed.
The two arrays are for the pages holding the request, and the pages holding
the reply. Instead of two arrays, we can simply keep an index into where the
first reply page is.
This patch also removes a number of small inline functions that probably
server to obscure what is going on rather than clarify it, and opencode the
needed functionality.
Also remove the 'rq_restailpage' variable as it is *always* 0. i.e. if the
response 'xdr' structure has a non-empty tail it is always in the same pages
as the head.
check counters are initilised and incr properly
check for consistant usage of ++ etc
maybe extra some inlines for common approach
general review
Signed-off-by: Neil Brown <neilb@suse.de>
Cc: Magnus Maatta <novell@kiruna.se>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Arrgg.. We cannot 'lockd_up' before 'svc_addsock' as we don't know the
protocol yet.... So switch it around again and save the name of the created
sockets so that it can be closed if lock_up fails.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The refcount that nfsd holds on lockd is based on the number of open sockets.
So when we close a socket, we should decrement the ref (with lockd_down).
Currently when a socket is closed via writing to the portlist file, that
doesn't happen.
So: make sure we get an error return if the socket that was requested does is
not found, and call lockd_down if it was.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
nfsv2 needs the I_MUTEX_PARENT on the directory when creating a file too.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since all callers dereference dir, we dont need this check. Coverity id
#337.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch converts two if () BUG(); construct to BUG_ON();
which occupies less space, uses unlikely and is safer when
BUG() is disabled.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
This patch converts an if () BUG(); construct to BUG_ON();
which occupies less space, uses unlikely and is safer when
BUG() is disabled.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
This patch converts several if () BUG(); construct to BUG_ON();
which occupies less space, uses unlikely and is safer when
BUG() is disabled. S_ISREG() has no side effects, so the
conversion is safe.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Change debufs_create_file() to debugfs_create_file().
Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Many files include the filename at the beginning, serveral used a wrong one.
Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
This patch has gfs2_security_init declared as a static function, which
is correct. As a result, the declaration of this function in inode.h is
removed (and thus inode.h is unchanged). Also removed #include eaops.h,
which is not needed.
Signed-Off-By: Ryan O'Hara <rohara@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This moves the logging code from meta_io.c into log.c and glops.c. As a
result the routines can now be static and all the logging code is together
in log.c, leaving meta_io.c with just metadata i/o code in it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
sysfs: use size_t length modifier in pr_debug format arguments
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
configfs: use size_t length modifier in pr_debug format argument
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
aio: use size_t length modifier in pr_debug format arguments
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
While reviewing the 'may be used uninitialized' bogus gcc warnings, I
noticed that an error code assignment was only needed if an error had
actually occured.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
These patches make the kernel pass 64-bit inode numbers internally when
communicating to userspace, even on a 32-bit system. They are required
because some filesystems have intrinsic 64-bit inode numbers: NFS3+ and XFS
for example. The 64-bit inode numbers are then propagated to userspace
automatically where the arch supports it.
Problems have been seen with userspace (eg: ld.so) using the 64-bit inode
number returned by stat64() or getdents64() to differentiate files, and
failing because the 64-bit inode number space was compressed to 32-bits, and
so overlaps occur.
This patch:
Make filldir_t take a 64-bit inode number and struct kstat carry a 64-bit
inode number so that 64-bit inode numbers can be passed back to userspace.
The stat functions then returns the full 64-bit inode number where
available and where possible. If it is not possible to represent the inode
number supplied by the filesystem in the field provided by userspace, then
error EOVERFLOW will be issued.
Similarly, the getdents/readdir functions now pass the full 64-bit inode
number to userspace where possible, returning EOVERFLOW instead when a
directory entry is encountered that can't be properly represented.
Note that this means that some inodes will not be stat'able on a 32-bit
system with old libraries where they were before - but it does mean that
there will be no ambiguity over what a 32-bit inode number refers to.
Note similarly that directory scans may be cut short with an error on a
32-bit system with old libraries where the scan would work before for the
same reasons.
It is judged unlikely that this situation will occur because modern glibc
uses 64-bit capable versions of stat and getdents class functions
exclusively, and that older systems are unlikely to encounter
unrepresentable inode numbers anyway.
[akpm: alpha build fix]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In many places GFS2 was calling the endian conversion routines
for an inode even when only a single field, or a few fields might
have changed. As a result we were copying lots of data needlessly.
This patch replaces those calls with conversion of just the
required fields in each case. This should be faster and easier
to understand. There are still other places which suffer from this
problem, but this is a start in the right direction.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
For some reason we had two different sets of code for reading in the
superblock. This removes one of them in favour of the other. Also we
don't need the temporary buffer for the sb since we already have one
in the gfs2 sb itself.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
JFS: White space cleanup
[PATCH] JFS: return correct error when i-node allocation failed
JFS: Remove shadow variable from fs/jfs/jfs_txnmgr.c:xtLog()
Update GFS2 in the light of David Howells' patch:
[PATCH] BLOCK: Move common FS-specific ioctls to linux/fs.h [try #6]
36695673b0
which calls the filesystem independant flags FS_..._FL. As a result
we no longer need the flags.h file and the conversion routine is
moved into the GFS2 source code.
Userland programs which used to include iflags.h should now include
fs.h and use the new flag names.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Revert Andrew Morton's patch to temporarily hack around the lack of a
declaration of sigset_t in linux/compat.h to make the block-disablement
patches build on IA64. This got accidentally pushed to Linus and should
be fixed in a different manner.
Also make linux/compat.h #include asm/signal.h to gain a definition of
sigset_t so that it can externally declare sigset_from_compat().
This has been compile-tested for i386, x86_64, ia64, mips, mips64, frv, ppc and
ppc64 and run-tested on frv.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
proc_pid_make_inode:
ei->pid = get_pid(task_pid(task));
I think this is not safe. get_pid() can be preempted after checking "pid
!= NULL". Then the task exits, does detach_pid(), and RCU frees the pid.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It was pointed out that since I am taking ARRAY_SIZE anyway the trailing empty
entry is silly and just wastes space.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The value doesn't change but this ensures I will have the proper value when
other files are added to proc_base_stuff.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
task_state() needs tasklist_lock to protect ->parent/->real_parent. However
task->parent points to nowhere only when the actions below happen in order
1) release_task(task)
2) release_task(task->parent)
3) a grace period passed
But 3) implies that the memory ops from 1) should be finished, so pid_alive()
can't be true in such a case.
Otherwise, we don't care if ->parent/->real_parent changes under us.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Drop tasklist_lock. ->siglock protects almost all interesting data
(including sub-threads traversal) except:
->signal->tty
protected by tty_mutex
->real_parent
the task can't be unhashed while we are holding
->siglock, so ->real_parent can change from under us
but we can safely dereference it under rcu_read_lock()
->pgrp/->session
we can get inconsistent numbers if the task does
sys_setsid/daemonize at the same time. I hope this
is acceptable.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
lock_task_sighand() can take ->siglock without holding tasklist_lock.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The implementation is exactly the same and there is currently nothing to
distinguish proc_tid_attr, and proc_tgid_attr. So it is pointless to have two
separate implementations.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The hard coded inode numbers in proc currently limit its maintainability,
its flexibility, and what can be done with the rest of system. /proc limits
pid-max to 32768 on 32 bit systems it limits fd-max to 32768 on all systems,
and placing the pid in the inode number really gets in the way of implementing
subdirectories of per process information.
Ever since people started adding to the middle of the file type enumeration we
haven't been maintaing the historical inode numbers, all we have really
succeeded in doing is keeping the pid in the proc inode number. The pid is
already available in the directory name so no information is lost removing it
from the inode number.
So if something in user space cares if we remove the inode number from the
/proc inode it is almost certainly broken.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
To remove the hard coded proc inode numbers it is necessary to be able to
create the proc inodes during readdir. The instantiate methods are the subset
of lookup that is needed to accomplish that.
This first step just splits the lookup methods into 2 functions.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch generalizes the concept of files in /proc that are related to
processes but live in the root directory of /proc
Ideally this would reuse infrastructure from the rest of the process specific
parts of proc but unfortunately security_task_to_inode must not be called on
files that are not strictly per process. security_task_to_inode really needs
to be reexamined as the security label can change in important places that we
are not currently catching, but I'm not certain that simplifies this problem.
By at least matching the structure of the rest of proc we get more idiom reuse
and it becomes easier to spot problems in the way things are put together.
Later things like /proc/mounts are likely to be moved into proc_base as well.
If union mounts are ever supported we may be able to make /proc a union mount,
and properly split it into 2 filesystems.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In some places, particularly drivers and __init code, the init utsns is the
appropriate one to use. This patch replaces those with a the init_utsname
helper.
Changes: Removed several uses of init_utsname(). Hope I picked all the
right ones in net/ipv4/ipconfig.c. These are now changed to
utsname() (the per-process namespace utsname) in the previous
patch (2/7)
[akpm@osdl.org: CIFS fix]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace references to system_utsname to the per-process uts namespace
where appropriate. This includes things like uname.
Changes: Per Eric Biederman's comments, use the per-process uts namespace
for ELF_PLATFORM, sunrpc, and parts of net/ipv4/ipconfig.c
[jdike@addtoit.com: UML fix]
[clg@fr.ibm.com: cleanup]
[akpm@osdl.org: build fix]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This moves the mount namespace into the nsproxy. The mount namespace count
now refers to the number of nsproxies point to it, rather than the number of
tasks. As a result, the unshare_namespace() function in kernel/fork.c no
longer checks whether it is being shared.
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add /proc/fs/nfsd/pool_threads which allows the sysadmin (or a userspace
daemon) to read and change the number of nfsd threads in each pool. The
format is a list of space-separated integers, one per pool.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace the existing list of all nfsd threads with new code using
svc_create_pooled().
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
add svc_get() for those occasions when we need to temporarily bump up
svc_serv->sv_nrthreads as a pseudo refcount.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If lockd_up fails - what should we expect? Do we have to later call
lockd_down?
Well the nfs client thinks "no", the nfs server thinks "yes". lockd thinks
"yes".
The only answer that really makes sense is "no" !!
So:
Make lockd_up only increment nlmsvc_users on success.
Make nfsd handle errors from lockd_up properly.
Make sure lockd_up(0) never fails when lockd is running
so that the 'reclaimer' call to lockd_up doesn't need to
be error checked.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Thus it is printed for any path that leads to failure (make_socks is called
from two places).
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We should be checking the return value of lockd_up when adding a new socket to
nfsd. So move the lockd_up before the svc_addsock and check the return value.
The move is because lockd_down is easy, but there is no easy way to remove a
recently added socket.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It isn't needed as it is available in rqstp->rq_server, and dropping it allows
some local vars to be dropped.
[akpm@osdl.org: build fix]
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
e_start acquires svc_export_cache.hash_lock, and e_stop releases it. Add
lock annotations to these two functions so that sparse can check callers
for lock pairing, and so that sparse will not complain about these
functions since they intentionally use locks in this manner.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Userspace should create and bind a socket (but not connectted) and write the
'fd' to portlist. This will cause the nfs server to listen on that socket.
To close a socket, the name of the socket - as read from 'portlist' can be
written to 'portlist' with a preceding '-'.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This file will list all ports that nfsd has open.
Default when TCP enabled will be
ipv4 udp 0.0.0.0 2049
ipv4 tcp 0.0.0.0 2049
Later, the list of ports will be settable.
'portlist' chosen rather than 'ports', to avoid unnecessary confusion with
non-mainline patches which created 'ports' with different semantics.
[akpm@osdl.org: cleanups, build fix]
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Separate out the code for creating a new service, and for creating initial
sockets.
Some of these new functions will have multiple callers soon.
[akpm@osdl.org: cleanups]
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We have an array 'nfsd_version' which lists the available versions of nfsd,
and 'nfsd_versions' (poor choice there :-() which lists the currently active
versions.
Then we have a bitmap - nfsd_versbits which says which versions are wanted.
The bits in this bitset cause content to be copied from nfsd_version to
nfsd_versions when nfsd starts.
This patch removes nfsd_versbits and moves information directly from
nfsd_version to nfsd_versions when requests for version changes arrive.
Note that this doesn't make it possible to change versions while the server is
running. This is because serv->sv_xdrsize is calculated when a service is
created, and used when threads are created, and xdrsize depends on the active
versions.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently lockd listens on UDP always, and TCP if CONFIG_NFSD_TCP is set.
However as lockd performs services of the client as well, this is a problem.
If CONFIG_NfSD_TCP is not set, and a tcp mount is used, the server will not be
able to call back to lockd.
So:
- add an option to lockd_up saying which protocol is needed
- Always open sockets for which an explicit port was given, otherwise
only open a socket of the type required
- Change nfsd to do one lockd_up per socket rather than one per thread.
This
- removes the dependancy on CONFIG_NFSD_TCP
- means that lockd may open sockets other than at startup
- means that lockd will *not* listen on UDP if the only
mounts are TCP mount (and nfsd hasn't started).
The latter is the only one that concerns me at all - I don't know if this
might be a problem with some servers.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
nfsd has some cleanup that it wants to do when the last thread exits, and
there will shortly be some more. So collect this all into one place and
define a callback for an rpc service to call when the service is about to be
destroyed.
[akpm@osdl.org: cleanups, build fix]
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This has been needed for a long time, but now with the advent of a
reference counted struct pid there are real consequences for getting this
wrong.
Someone I think it was Oleg Nesterov pointed out that this construct was
missing locking, when I introduced struct pid. After taking time to review
the locking construct already present I figured out which lock needs to be
taken. The other paths that access f_owner.pid take either the f_owner
read or the write lock.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Define a per-container pid space object. And create one instance of this
object, init_pspace, to define the entire pid space. Subsequent patches
will provide/use interfaces to create/destroy pid spaces.
Its a subset/rework of Eric Biederman's patch
http://lkml.org/lkml/2006/2/6/285 .
Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Only touch inode's i_mtime and i_ctime to make them equal to "now" in case
they aren't yet (don't just update timestamp unconditionally). Uninline
the hash function to save 259 Bytes.
This tiny inode change which may improve cache behaviour also shaves off 8
Bytes from file_update_time() on i386.
Included a tiny codestyle cleanup, too.
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
File handles can be requested to send sigio and sigurg to processes. By
tracking the destination processes using struct pid instead of pid_t we make
the interface safe from all potential pid wrap around problems.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Helper functions in base.c like proc_pident_readdir and proc_pident_lookup
assume the directories have an associated task, and cannot currently be used
on the /proc root directory because it does not have such a task.
This small changes allows for base.c to be simplified and later when multiple
pid spaces are introduced it makes getting the needed context information
trivial.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently proc_pident_lookup gets the names and types from a table and then
has a huge switch statement to get the inode and file operations it needs.
That is silly and is becoming increasingly hard to maintain so I just put all
of the information in the table.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There were enough changes in my last round of cleaning up proc I had to break
up the patch series into smaller chunks, and my last chunk never got resent.
This patchset gives proc dynamic inode numbers (the static inode numbers were
a pain to maintain and prevent all kinds of things), and removes the horrible
switch statements that had to be kept in sync with everything else. Being
fully table driver takes us 90% of the way of being able to register new
process specific attributes in proc.
This patch:
Group the functions by what they implement instead of by type of operation.
As it existed base.c was quickly approaching the point where it could not be
followed.
No functionality or code changes asside from adding/removing forward
declartions are implemented in this patch.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The problem: An opendir, readdir, closedir sequence can fail to report
process ids that are continually in use throughout the sequence of system
calls. For this race to trigger the process that proc_pid_readdir stops at
must exit before readdir is called again.
This can cause ps to fail to report processes, and it is in violation of
posix guarantees and normal application expectations with respect to
readdir.
Currently there is no way to work around this problem in user space short
of providing a gargantuan buffer to user space so the directory read all
happens in on system call.
This patch implements the normal directory semantics for proc, that
guarantee that a directory entry that is neither created nor destroyed
while reading the directory entry will be returned. For directory that are
either created or destroyed during the readdir you may or may not see them.
Furthermore you may seek to a directory offset you have previously seen.
These are the guarantee that ext[23] provides and that posix requires, and
more importantly that user space expects. Plus it is a simple semantic to
implement reliable service. It is just a matter of calling readdir a
second time if you are wondering if something new has show up.
These better semantics are implemented by scanning through the pids in
numerical order and by making the file offset a pid plus a fixed offset.
The pid scan happens on the pid bitmap, which when you look at it is
remarkably efficient for a brute force algorithm. Given that a typical
cache line is 64 bytes and thus covers space for 64*8 == 200 pids. There
are only 40 cache lines for the entire 32K pid space. A typical system
will have 100 pids or more so this is actually fewer cache lines we have to
look at to scan a linked list, and the worst case of having to scan the
entire pid bitmap is pretty reasonable.
If we need something more efficient we can go to a more efficient data
structure for indexing the pids, but for now what we have should be
sufficient.
In addition this takes no additional locks and is actually less code than
what we are doing now.
Also another very subtle bug in this area has been fixed. It is possible
to catch a task in the middle of de_thread where a thread is assuming the
thread of it's thread group leader. This patch carefully handles that case
so if we hit it we don't fail to return the pid, that is undergoing the
de_thread dance.
Thanks to KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> for
providing the first fix, pointing this out and working on it.
[oleg@tv-sign.ru: fix it]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Removed trailing spaces & tabs, and spaces preceding tabs.
Also a couple very minor comment cleanups.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
(cherry picked from f74156539964d7b3d5164fdf8848e6a682f75b97 commit)
I have seen confusing behavior on JFS when I injected many intentional
slab allocation errors. The cp command failed with no disk space error
with enough disk space.
This patch makes:
- change the return value in case slab allocation failures happen
from -ENOSPC to -ENOMEM
- ialloc() return error code so that the caller can know the reason
of failures
Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
(cherry picked from 2b46f77976f798f3fe800809a1d0ed38763c71c8 commit)
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
(cherry picked from bdc3d9e5af7d9c105be734dd7b5c3f1d9425a15a commit)
Fix GFS for streamline-generic_file_-interfaces-and-filemap.patch
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch removes readv() and writev() methods and replaces them with
aio_read()/aio_write() methods.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Using the infrastructure created in previous patches implement support to
pipe core dumps into programs.
This is done by overloading the existing core_pattern sysctl
with a new syntax:
|program
When the first character of the pattern is a '|' the kernel will instead
threat the rest of the pattern as a command to run. The core dump will be
written to the standard input of that program instead of to a file.
This is useful for having automatic core dump analysis without filling up
disks. The program can do some simple analysis and save only a summary of
the core dump.
The core dump proces will run with the privileges and in the name space of
the process that caused the core dump.
I also increased the core pattern size to 128 bytes so that longer command
lines fit.
Most of the changes comes from allowing core dumps without seeks. They are
fairly straight forward though.
One small incompatibility is that if someone had a core pattern previously
that started with '|' they will get suddenly new behaviour. I think that's
unlikely to be a real problem though.
Additional background:
> Very nice, do you happen to have a program that can accept this kind of
> input for crash dumps? I'm guessing that the embedded people will
> really want this functionality.
I had a cheesy demo/prototype. Basically it wrote the dump to a file again,
ran gdb on it to get a backtrace and wrote the summary to a shared directory.
Then there was a simple CGI script to generate a "top 10" crashes HTML
listing.
Unfortunately this still had the disadvantage to needing full disk space for a
dump except for deleting it afterwards (in fact it was worse because over the
pipe holes didn't work so if you have a holey address map it would require
more space).
Fortunately gdb seems to be happy to handle /proc/pid/fd/xxx input pipes as
cores (at least it worked with zsh's =(cat core) syntax), so it would be
likely possible to do it without temporary space with a simple wrapper that
calls it in the right way. I ran out of time before doing that though.
The demo prototype scripts weren't very good. If there is really interest I
can dig them out (they are currently on a laptop disk on the desk with the
laptop itself being in service), but I would recommend to rewrite them for any
serious application of this and fix the disk space problem.
Also to be really useful it should probably find a way to automatically fetch
the debuginfos (I cheated and just installed them in advance). If nobody else
does it I can probably do the rewrite myself again at some point.
My hope at some point was that desktops would support it in their builtin
crash reporters, but at least the KDE people I talked too seemed to be happy
with their user space only solution.
Alan sayeth:
I don't believe that piping as such as neccessarily the right model, but
the ability to intercept and processes core dumps from user space is asked
for by many enterprise users as well. They want to know about, capture,
analyse and process core dumps, often centrally and in automated form.
[akpm@osdl.org: loff_t != unsigned long]
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Split the big and hard to read do_pipe function into smaller pieces.
This creates new create_write_pipe/free_write_pipe/create_read_pipe
functions. These functions are made global so that they can be used by
other parts of the kernel.
The resulting code is more generic and easier to read and has cleaner error
handling and less gotos.
[akpm@osdl.org: cleanup]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Some filesystems, instead of simply decrementing i_nlink, simply zero it
during an unlink operation. We need to catch these in addition to the
decrement operations.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OCFS2 does some operations on i_nlink, then reverts them if some of its
operations fail to complete. This does not fit in well with the
drop_nlink() logic where we expect i_nlink to stay at zero once it gets
there.
So, delay all of the nlink operations until we're sure that the operations
have completed. Also, introduce a small helper to check whether an inode
has proper "unlinkable" i_nlink counts no matter whether it is a directory
or regular inode.
This patch is broken out from the others because it does contain some
logical changes.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is mostly included for parity with dec_nlink(), where we will have some
more hooks. This one should stay pretty darn straightforward for now.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When a filesystem decrements i_nlink to zero, it means that a write must be
performed in order to drop the inode from the filesystem.
We're shortly going to have keep filesystems from being remounted r/o between
the time that this i_nlink decrement and that write occurs.
So, add a little helper function to do the decrements. We'll tie into it in a
bit to note when i_nlink hits zero.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The code around vfs_create() in open_namei() is getting a bit too complex.
Right now, there is at least the reference count on the dentry, and the
i_mutex to worry about. Soon, we'll also have mnt_writecount.
So, break the vfs_create() call out of open_namei(), and into a helper
function. This duplicates the call to may_open(), but that isn't such a bad
thing since the arguments (acc_mode and flag) were being heavily massaged
anyway.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We're shortly going to be adding a bunch more permission checks in these
functions. That requires adding either a bunch of new if() conditions, or
some gotos. This patch collapses existing if()s and uses gotos instead to
prepare for the upcoming changes.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There were a few accounting data/macros that are used in CSA but are #ifdef'ed
inside CONFIG_BSD_PROCESS_ACCT. This patch is to change those ifdef's from
CONFIG_BSD_PROCESS_ACCT to CONFIG_TASK_XACCT. A few defines are moved from
kernel/acct.c and include/linux/acct.h to kernel/tsacct.c and
include/linux/tsacct_kern.h.
Signed-off-by: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jes Sorensen <jes@sgi.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This work is initially done by Zach Brown to add support for vectored aio.
These are the core changes for AIO to support
IOCB_CMD_PREADV/IOCB_CMD_PWRITEV.
[akpm@osdl.org: huge build fix]
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch cleans up generic_file_*_read/write() interfaces. Christoph
Hellwig gave me the idea for this clean ups.
In a nutshell, all filesystems should set .aio_read/.aio_write methods and use
do_sync_read/ do_sync_write() as their .read/.write methods. This allows us
to cleanup all variants of generic_file_* routines.
Final available interfaces:
generic_file_aio_read() - read handler
generic_file_aio_write() - write handler
generic_file_aio_write_nolock() - no lock write handler
__generic_file_aio_write_nolock() - internal worker routine
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch removes readv() and writev() methods and replaces them with
aio_read()/aio_write() methods.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch vectorizes aio_read() and aio_write() methods to prepare for
collapsing all aio & vectored operations into one interface - which is
aio_read()/aio_write().
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Michael Holzheu <HOLZHEU@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When a file system becomes fragmented (using MythTV, for example), the
bigalloc window searching ends up causing huge performance problems. In a
file system presented by a user experiencing this bug, the file system was
90% free, but no 32-block free windows existed on the entire file system.
This causes the allocator to scan the entire file system for each 128k
write before backing down to searching for individual blocks.
In the end, finding a contiguous window for all the blocks in a write is an
advantageous special case, but one that can be found naturally when such a
window exists anyway.
This patch removes the bigalloc window searching, and has been proven to
fix the test case described above.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
