This adds dts files for two new beaglebone variants for
Octavo Systems OSD3358-SM-RED and Sancloud am335x-sancloud-bbe.
-----BEGIN PGP SIGNATURE-----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=h3F9
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.19/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Few more beaglebone variants for v4.19 merge window
This adds dts files for two new beaglebone variants for
Octavo Systems OSD3358-SM-RED and Sancloud am335x-sancloud-bbe.
* tag 'omap-for-v4.19/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x: add am335x-sancloud-bbe board support
dt-bindings: Add vendor prefix for Sancloud
ARM: dts: Add DT support for Octavo Systems OSD3358-SM-RED based on TI AM335x
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds support for Lairds upcoming SOM module, featuring Marvell WiFi
and Bluetooth, 2Gb NAND / 1Gb LPDDR SDRAM, and an Atmel SAMA5D3 CPU.
Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add support for the LoRa gateway from Laird, the RG1xx.
This board houses the WB50NBT CPU module along with a Semtech SX1301 based
concentrator card.
https://www.lairdtech.com/products/rg1xx-lora-gateway
Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This adds support for Lairds CPU module, featuring Atheros wifi, CSR
Bluetooth and, Atmel SAMA5D3 CPU.
https://www.lairdtech.com/products/wb50nbt-wi-fi-bluetooth-module
Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This adds support for Lairds combo CPU module, featuring on board
Atheros wifi, CSR Bluetooth radio and, Atmel CPU.
https://www.lairdtech.com/products/wb45nbt
Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add a dts for MYIR Z-turn board and respective target in Makefile.
Signed-off-by: Anton Gerasimov <tossel@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The "Beaglebone Enhanced" by Sancloud is based on the Beaglebone Black,
but with the following differences:
* Gigabit capable PHY
* Extra USB hub, optional i2c control
* lps3331ap barometer connected over i2c
* MPU6050 6 axis MEMS accelerometer/gyro connected over i2c
* 1GiB DDR3 RAM
* RTL8723 Wifi/Bluetooth connected over USB
Tested on a revision G board.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
OSD3358-SM-RED is a dev board for OSD335x System-in-Package(SiP) devices from
Octavo Systems.
This board family can be indentified by the A335BNLTOS00 in the at24 eeprom:
A2: [aa 55 33 ee 41 33 33 35 42 4e 4c 54 4f 53 30 30 |.U3.A335BNLTOS00|]
https://octavosystems.com/octavo_products/osd3358-sm-red/
Signed-off-by: Neeraj Dantu <neeraj.dantu@octavosystems.com>
CC: Tony Lindgren <tony@atomide.com>
CC: Robert Nelson <robertcnelson@gmail.com>
CC: Jason Kridner <jkridner@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ConnectCore 6UL Single Board Computer (SBC) Express contains the
ConnectCore 6UL System-On-Module.
Its hardware specifications are:
* 256MB DDR3 memory
* 256MB NAND flash
* Single Ethernet
* USB Host and USB-OTG
* MicroSD external storage
* Groove connectors and Raspberry Pi Hat compatible expansion header
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Normally, we didn't release this kind of baord to user. This specific
board exists only in the early stage of development inside MediaTek -
and that may confuse peoples.
Hence this patch removes related files accordingly.
Cc: John Crispin <john@phrozen.org>
Cc: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
- Add Vitesse switch chips
- Add a new DT for a reference design
-----BEGIN PGP SIGNATURE-----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=3RrW
-----END PGP SIGNATURE-----
Merge tag 'gemini-dts-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt
Gemini DTS updates for v4.19:
- Add Vitesse switch chips
- Add a new DT for a reference design
* tag 'gemini-dts-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Add devicetree for Storlink/Storm SL93512R
ARM: dts: Add Vitesse G5e switch to the Gemini SQ201
ARM: dts: Add WAN ethernet port to the SQ201
Signed-off-by: Olof Johansson <olof@lixom.net>
The Storlink Gemini324 EV-Board also known as Storm
Semiconductor SL93512R_BRD is ground zero for the Gemini
devices. We add a device tree so we can support it, it
turns out to be pretty trivial.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add a new Armada 388 based board: helios4
- Enable SPI flash by default on SolidRun Armada 38x Microsom
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCW0hvzAAKCRALBhiOFHI7
1eiZAJ4khxwKduQLyzz0nqyaX7jefrb7ywCfY8WXMc0ay/qwZytGcUUqpWMeY3Y=
=OVdR
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.19-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt for 4.19 (part 1)
- Add a new Armada 388 based board: helios4
- Enable SPI flash by default on SolidRun Armada 38x Microsom
* tag 'mvebu-dt-4.19-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada388-clearfog: drop future changes disclaimer
ARM: dts: armada388-clearfog: enable spi flash
ARM: dts: armada388-helios4
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Add two new S5Pv210 boards: Samsung Galaxy S and Samsung Galaxy S 4G
mobile phones. Both are from family codenamed Aries. The Samsung
Galaxy S was released on the market in 2010 with Android operating
system. At that time, it was the Samsung's flagship model.
This brings support for storage (SD card and internal memory), PMIC,
RTC, fuel-gauge, keys, USB (in peripherial mode) and WiFi.
2. Add missing secondary CPU properties.
3. Cleanup from old files and properties.
-----BEGIN PGP SIGNATURE-----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=afvE
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Samsung DTS ARM changes for v4.19
1. Add two new S5Pv210 boards: Samsung Galaxy S and Samsung Galaxy S 4G
mobile phones. Both are from family codenamed Aries. The Samsung
Galaxy S was released on the market in 2010 with Android operating
system. At that time, it was the Samsung's flagship model.
This brings support for storage (SD card and internal memory), PMIC,
RTC, fuel-gauge, keys, USB (in peripherial mode) and WiFi.
2. Add missing secondary CPU properties.
3. Cleanup from old files and properties.
* tag 'samsung-dt-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: samsung: Document bindings for SGH-T959P board
dt-bindings: samsung: Document bindings for Samsung aries boards
ARM: dts: s5pv210: Add initial DTS for SGH-T959P phone
ARM: dts: s5pv210: Add initial DTS for Samsung Galaxy S phone
ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones
ARM: dts: s5pv210: Add missing interrupt-controller property to gph2
ARM: dts: exynos: remove no longer needed samsung thermal properties
dt-bindings: arm: Remove obsolete insignal-boards.txt
ARM: dts: exynos: Add missing CPU clocks to secondary CPUs on Exynos542x
arm: dts: exynos: Add missing cooling device properties for CPUs
Signed-off-by: Olof Johansson <olof@lixom.net>
This set of changes adds support for the memory client resets on Tegra20
and Tegra30, fixes a couple of issues on Cardhu and Tegra30 Apalis as
well as adds a unit-address to the memory node to avoid warnings from
DTC. To round things of, the NAND flash controller is enabled on the
Tegra20 Colibri.
-----BEGIN PGP SIGNATURE-----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=+IHO
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.19-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
ARM: tegra: Device tree changes for v4.19-rc1
This set of changes adds support for the memory client resets on Tegra20
and Tegra30, fixes a couple of issues on Cardhu and Tegra30 Apalis as
well as adds a unit-address to the memory node to avoid warnings from
DTC. To round things of, the NAND flash controller is enabled on the
Tegra20 Colibri.
* tag 'tegra-for-4.19-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: dts: tegra: enable NAND flash on Colibri T20
ARM: dts: tegra: add Tegra20 NAND flash controller node
ARM: tegra: Work safely with 256 MB Colibri-T20 modules
ARM: tegra: Fix unit_address_vs_reg and avoid_unnecessary_addr_size DTC warnings
ARM: tegra: Fix unit_address_vs_reg DTC warnings for /memory
ARM: tegra: Remove usage of deprecated skeleton.dtsi
ARM: tegra: Fix can2 on Tegra30 Apalis
ARM: tegra: Fix Tegra30 Cardhu PCA954x reset
ARM: dts: tegra30: Add Memory Client reset to VDE
ARM: dts: tegra20: Add Memory Client reset to VDE
Signed-off-by: Olof Johansson <olof@lixom.net>
Colibri-T20 can come in 256 MB RAM (with 512 MB NAND) or 512 MB RAM
(with 1024 MB NAND) flavors. Both of them will use the same DTSI
expecting the bootloader to do the fixup of /memory node. However in
case it does not happen, let's stay on safe side by limiting the memory
to 256 MB for both versions of Colibri-T20.
Rename to remove the unnecessary memory size from the device tree file
name. While at it, also follow the typical Toradex SoC, module, carrier
board hierarchy.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This DTS file have initial support Samsung SGH-T959P phone,
also known as Samsung Galaxy S 4G or fascinate4g. It belongs to Samsung
Aries devices family.
Initial version have support for:
- sdcard
- max8998 pmic and rtc
- max17040 fuel gauge
- gpio keys
- fimd (no panel driver yet)
- usb (peripherial mode)
- wifi
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This DTS file have initial support Samsung Galaxy S phone, also known as
i9000. It belongs to Samsung Aries devices family.
Initial version have support for:
- sdcard
- internal memory
- max8998 pmic and rtc
- max17040 fuel gauge
- gpio keys
- fimd (no panel driver yet)
- usb (peripherial mode)
- wifi
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The helios4 is a Armada388 based nas board designed by SolidRun and
based on their SOM. It is sold by kobol.io the dts file came from
https://raw.githubusercontent.com/armbian/build/master/patch/kernel/mvebu-default/95-helios4-device-tree.patch
I added a SPDX license line to match the clearfog it says it was based
on and a compatible line for "kobol,helios4"
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The Raspberry Pi Compute Module (CM1) is a SoM which contains a
BCM2835 processor, 512 MB RAM and a 4 GB eMMC. There is also a carrier
board which is called Compute Module IO Board.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
i.CoreM6 1.5 is an another i.CoreM6 QDL cpu modules which can be connected
to EDIMM starter kit design with eMMC and MIPI-CSI interfaces suitable for
Android and video capture application.
notable features:
CPU NXP i.MX6 S/DL/D/Q, Up to 4 x Cortex-A9@800MHz
Memory Up to 2 GB DDR3-1066
Video Interfaces Up to 1 Parallel Up to 2 LVDS HDMI 1.4
port 8 bit CSI INPUT MIPI-CSI INPUT
1 x 10/100 Ethernet interface, 2 x USB, 1 x PCIe, 1 x I2S etc
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit provides support for HSC and DDC boards from
Kieback&Peter GmbH vendor.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is a branch with a few merge requests that either came in late, or
took a while longer for us to review and merge than usual and thus cut
it a bit close to the merge window. We stage them in a separate branch
and if things look good, we still send them up -- and that's the case
here.
This is mostly DT additions for Renesas platforms, adding IP block
descriptions for existing and new SoCs.
There are also some driver updates for Qualcomm platforms for SMEM/QMI
and GENI, which is their generalized serial protocol interface.
-----BEGIN PGP SIGNATURE-----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=RUL0
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late updates from Olof Johansson:
"This is a branch with a few merge requests that either came in late,
or took a while longer for us to review and merge than usual and thus
cut it a bit close to the merge window. We stage them in a separate
branch and if things look good, we still send them up -- and that's
the case here.
This is mostly DT additions for Renesas platforms, adding IP block
descriptions for existing and new SoCs.
There are also some driver updates for Qualcomm platforms for SMEM/QMI
and GENI, which is their generalized serial protocol interface"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits)
soc: qcom: smem: introduce qcom_smem_virt_to_phys()
soc: qcom: qmi: fix a buffer sizing bug
MAINTAINERS: Update pattern for qcom_scm
soc: Unconditionally include qcom Makefile
soc: qcom: smem: check sooner in qcom_smem_set_global_partition()
soc: qcom: smem: fix qcom_smem_set_global_partition()
soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private()
soc: qcom: smem: byte swap values properly
soc: qcom: smem: return proper type for cached entry functions
soc: qcom: smem: fix first cache entry calculation
soc: qcom: cmd-db: Make endian-agnostic
drivers: qcom: add command DB driver
arm64: dts: renesas: salvator-common: Add ADV7482 support
ARM: dts: r8a7740: Add CEU1
ARM: dts: r8a7740: Add CEU0
arm64: dts: renesas: salvator-common: enable VIN
arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7795-es1: add CSI-2 node
...
New hardware support added:
USB controllers for AST2400 and AST2500 which have drivers
merged in 4.18.
Hardware random number generator which we made enhancements to many
releases ago, but never added the device tree parts.
Misc changes to support watchdog and gpio-keys features used by
OpenBMC systems.
New machines:
Intel S2600WF, an Intel platform family with an ASPEED AST2500 BMC.
Inventec Lanyang, a Power 9 platform with AST2500.
Portwell Neptune, a x86 server development kit with an AST2500.
-----BEGIN PGP SIGNATURE-----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=bGbT
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.18-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt
ASPEED device tree updates for 4.18
New hardware support added:
USB controllers for AST2400 and AST2500 which have drivers
merged in 4.18.
Hardware random number generator which we made enhancements to many
releases ago, but never added the device tree parts.
Misc changes to support watchdog and gpio-keys features used by
OpenBMC systems.
New machines:
Intel S2600WF, an Intel platform family with an ASPEED AST2500 BMC.
Inventec Lanyang, a Power 9 platform with AST2500.
Portwell Neptune, a x86 server development kit with an AST2500.
* tag 'aspeed-4.18-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: Aspeed: Enable USB ports on eval board.
ARM: dts: Add Aspeed SoC USB controllers to device-tree
ARM: dts: aspeed: Add S2600WF BMC Machine
ARM: dts: aspeed: Add Inventec Lanyang BMC
ARM: dts: aspeed: Add Portwell Neptune machine
ARM: dts: aspeed: witherspoon: Set alternate boot
ARM: dts: aspeed: witherspoon: Add gpio keys for power supply presence
ARM: dts: aspeed: witherspoon: Enable checkstop and cooling gpio keys
ARM: dts: aspeed: zaius: Add pcie-e2b-present gpio key
ARM: dts: aspeed: romulus: Add id-button gpio key
ARM: dts: aspeed: Describe random number device
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----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=L7gS
-----END PGP SIGNATURE-----
Merge tag 'berlin-dt-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin into next/dt
berlin DT changes for v4.18
* tag 'berlin-dt-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin:
ARM: dts: berlin2q: move PMU node from soc to root
ARM: dts: berlin*-dts: use SPDX-License-Identifier for berlin based board
ARM: dts: berlin*.dtsi: use SPDX-License-Identifier for berlin SoCs
ARM: dts: berlin2: fix irq type for arm twd timer
ARM: dts: berlin2q: fix irq type for arm twd timer
ARM: dts: berlin2q: add "cache-unified" to l2 node
ARM: dts: berlin2q: add interrupt-affinity to pmu node
ARM: dts: chromecast: use PWM for LEDs
ARM: dts: chromecast: override bad bootloader memory info
ARM: dts: berlin2cd: add Valve Steam Link board
ARM: dts: berlin2cd: add a label for the CPU node
ARM: dts: berlin2cd: add remaining nodes to apb subtrees
ARM: dts: berlin2cd: add remaining Cortex-A9 nodes
ARM: dts: berlin2cd: add ADC/thermal sensor node
ARM: dts: berlin2cd: move PMU node from soc to root
ARM: dts: berlin2cd: fix local timer interrupt flags
Signed-off-by: Olof Johansson <olof@lixom.net>
- remove MACH_MESON8B, only used for building DTs
-----BEGIN PGP SIGNATURE-----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=7Isa
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Amlogic 32-bit DT changes for v4.18, round 2
- remove MACH_MESON8B, only used for building DTs
* tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: meson: merge Kconfig symbol MACH_MESON8B into MACH_MESON8
ARM: dts: meson: build the Meson8b .dtbs with MACH_MESON8
Signed-off-by: Olof Johansson <olof@lixom.net>
Here is our usual bunch of changes for the H3 and H5 SoCs that share the
same SoC design but with different CPUs.
This time, most of the changes are about supporting CPUFreq on these SoCs,
with voltage scaling being enabled for a number of boards.
-----BEGIN PGP SIGNATURE-----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=trdL
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner H3/H5 support for 4.18
Here is our usual bunch of changes for the H3 and H5 SoCs that share the
same SoC design but with different CPUs.
This time, most of the changes are about supporting CPUFreq on these SoCs,
with voltage scaling being enabled for a number of boards.
* tag 'sunxi-h3-h5-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: h3: Add SY8106A regulator to Orange Pi PC
arm64: dts: allwinner: Add dts file for Libre Computer Board ALL-H3-CC H5 ver.
arm64: dts: allwinner: Sort dtb entries in Makefile
arm64: dts: allwinner: h5: Add cpu0 label for first cpu
ARM: dts: sun8i: h2+: Add Libre Computer Board ALL-H3-CC H2+ ver.
ARM: dts: sun8i: h2-plus: Sort dtb entries in Makefile
arm: dts: sun8i: h3: libretech-all-h3-cc: Move board definition to common dtsi
ARM: dts: sun8i: h3: fix ALL-H3-CC H3 ver VCC-1V2 regulator voltage
ARM: dts: sun8i: h3: set the cpu-supply to VDD-CPUX on ALL-H3-CC H3 ver
ARM: dts: sun8i: h3: fix ALL-H3-CC H3 ver VDD-CPUX voltage
ARM: dts: sun8i: h3: add SY8113B regulator used by Orange Pi One board
ARM: dts: sun8i: h2+: add SY8113B regulator used by Orange Pi Zero board
ARM: dts: sun8i: h3: add operating-points-v2 table for CPU
ARM: dts: sunxi: h3/h5: Add r_i2c I2C controller
ARM: dts: sunxi: h3/h5: Add r_i2c pinmux node
Signed-off-by: Olof Johansson <olof@lixom.net>
Here is our usual bunch of DT changes for our arm SoCs, with most
significantly:
- MIPI-DSI support for the A33
- NAND support for the A33
- SMP support for the A83t
- GMAC support for the R40
- And some new boards: Olimex A20-SOM-EVB-eMMC, Nintendo NES and SuperNES
Classic
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE0VqZU19dR2zEVaqr0rTAlCFNr3QFAlsClXwACgkQ0rTAlCFN
r3TuSg/+I7KPeriS3XpLGtEa+mibGDtpCL3wq07HatExCGvkqOMzlySLqlQZLPJC
BkIit55EIhmsn6yHpdH3zWMpb/EN4izpX6Ht260/6G5jM+Bzdc8M2SashwKjGixf
VYMeku+3jJKi68WPCqlQ7xZDY9dJzSiVVahePfmsLqmos4SpinwFG7scm5+bN0x7
6W9AfernSiPwTtMLqe9uHu5PY+bqxNMln/JelaRQPRwbh984/MFtTbjTezD9CUT6
In4qCfghJyBX9XSe+j0IPayg/1E7dEKVPC7yVP1MkOef7H1OEQHOU9tlz4u4lEBI
FDowiFtTPpfQQQLAIIOiqMNMrJg7xSp2cy8jbAe8HlEdR1tP4O7cw0iXVXmLT6Ny
DWua6AAk4Shp+yA9TocRcPNzd9/fn8h9RAO3wt+bmjU+jLHMv++k4oMxSFQmOhMl
wgiNxjnuSPQ0JmeGn4f+SATvCyi7F+DzgZ9yGVqF/HiLu0JDaLQ9wnqb+Xh4i03i
PDPFf9LCAC6JdovENpS2JAzCoowDgAxxsli4HMGgPP4GmrFWc6Ts0itGqsQBa5ro
do0DYAPHoxHqiqgvR6oITKbhyD4M/iXfXvQLnPq6EHixuT/HtsvTYpLLfh8fPjbX
5c2+OaFwhHZlIYJqVcwFEkem7xQU+I51LTEp3NhVcD1dTtKqNJk=
=f5iC
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT additions for 4.18
Here is our usual bunch of DT changes for our arm SoCs, with most
significantly:
- MIPI-DSI support for the A33
- NAND support for the A33
- SMP support for the A83t
- GMAC support for the R40
- And some new boards: Olimex A20-SOM-EVB-eMMC, Nintendo NES and SuperNES
Classic
* tag 'sunxi-dt-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun7i: Add Olimex A20-SOM-EVB-eMMC board
ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable GMAC ethernet controller
ARM: dts: sun8i: r40: Add device node and RGMII pinmux node for GMAC
ARM: dts: sun8i: r40: bananapi-m2-ultra: Sort device node dereferences
ARM: dts: sun8i: Add enable-method for SMP support for the A83T SoC
ARM: dts: sun8i: a83t: Add CCI-400 node
ARM: dts: sun8i: Add R_CPUCFG device node for the A83T dtsi
ARM: dts: sun8i: Add CPUCFG device node for A83T dtsi
ARM: dts: nes: add Nintendo NES/SuperNES Classic Edition support
ARM: dts: sun8i: a23/a33: declare NAND pins
ARM: dts: sunxi: Add sid for a83t
ARM: dts: sun8i: a33: Add the DSI-related nodes
ARM: dts: sunxi: Change sun7i-a20-olimex-som204-evb to not use cd-inverted
ARM: sun8i: v40: enable USB host ports for Banana Pi M2 Berry
Signed-off-by: Olof Johansson <olof@lixom.net>
- New boards support: BTicino i.MX6DL Mamoj board, DHCOM iMX6 SoM and
PDK2 board, Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit,
Kieback & Peter GmbH iMX6Q TPC board.
- A series from Anson Huang to add a bunch of devices for i.MX6SX
SabreAuto board, PMIC, IO expanders, FEC, Watchdog, LED and Touch.
- Update i.MX7D for cpufreq support, using operating-points-v2
bindings, correcting cpu supply name for voltage scaling.
- Clean up unneeded 'codec-handle' property from imx25-pdk and
imx53-tx53 device tree.
- Switch SoC dtsi and NXP board dts files to use SPDX identifier.
- Remove unnecessary '#address-cells/#size-cells' to fix DTC warning
avoid_unnecessary_addr_size seen with W=1 switch.
- A series from Rob Herring to fix DTC warning graph_endpoint seen with
IPU OF graph when W=1 switch is on.
- Update a few boards to use symbol name instead of hard-coding the
input codes.
- Update a number of boards to use IRQ_TYPE specifier instead of the
raw value.
- A few updates for i.MX6 RDU2 board: bumping SoC/PU operating points,
adding assigned clocks for GPU, and enabling eGalax touchscreen.
- A couple of i.MX51 RDU1 updates: limiting usbh1 to full-speed, and
cleaning up eMMC device node.
- Convert Hummingboard audio bindings from imx-audio-sgtl5000 to
simple-audio-card, so that auxiliary audio devices such as external
amplifiers can be supported.
- Replace underscore with hyphen in aliases name to fix DTC warning
alias_paths with W=1 switch.
- A couple of updates on i.MX7D SAI and i.MX6ULL UART5 pin defines.
- Other random and small changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbAYgeAAoJEFBXWFqHsHzO8ZUH/RG21GCtMGozrIoL9f0/6R4T
wBj/vdg31XGk7XYkmxKH5J6hwryco7Z2uMfKhsRbfXUzt+DxwtseJUgaKHygk/oh
ns7LhuSvhYwqa6AENN70DOt4b3TX/sAyYrBIFUXQRsZrafPhn7+8/Y8oiLbY3lOs
cctrHA31jz5ytXVoLT1AkFST020JcRjaTpRFYqDohpcOOMqhpjPxPJ6uF6lE/LHf
XVzBYGbxzmzH5PDpEy7KjzkxDt0cvBfH7LrfvcHzi8hGho3P1ShpRah/TYKpmwkx
MVD1NRFTCwKgIjibcjfLse9NJdixza5j6pvWaCacC9agWG6drOxYvYy4ILe2ros=
=F8Nx
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX device tree update for 4.18:
- New boards support: BTicino i.MX6DL Mamoj board, DHCOM iMX6 SoM and
PDK2 board, Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit,
Kieback & Peter GmbH iMX6Q TPC board.
- A series from Anson Huang to add a bunch of devices for i.MX6SX
SabreAuto board, PMIC, IO expanders, FEC, Watchdog, LED and Touch.
- Update i.MX7D for cpufreq support, using operating-points-v2
bindings, correcting cpu supply name for voltage scaling.
- Clean up unneeded 'codec-handle' property from imx25-pdk and
imx53-tx53 device tree.
- Switch SoC dtsi and NXP board dts files to use SPDX identifier.
- Remove unnecessary '#address-cells/#size-cells' to fix DTC warning
avoid_unnecessary_addr_size seen with W=1 switch.
- A series from Rob Herring to fix DTC warning graph_endpoint seen with
IPU OF graph when W=1 switch is on.
- Update a few boards to use symbol name instead of hard-coding the
input codes.
- Update a number of boards to use IRQ_TYPE specifier instead of the
raw value.
- A few updates for i.MX6 RDU2 board: bumping SoC/PU operating points,
adding assigned clocks for GPU, and enabling eGalax touchscreen.
- A couple of i.MX51 RDU1 updates: limiting usbh1 to full-speed, and
cleaning up eMMC device node.
- Convert Hummingboard audio bindings from imx-audio-sgtl5000 to
simple-audio-card, so that auxiliary audio devices such as external
amplifiers can be supported.
- Replace underscore with hyphen in aliases name to fix DTC warning
alias_paths with W=1 switch.
- A couple of updates on i.MX7D SAI and i.MX6ULL UART5 pin defines.
- Other random and small changes.
* tag 'imx-dt-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (72 commits)
ARM: dts: imx28/imx53: enable edt-ft5x06 wakeup source
ARM: dts: imx51-zii-rdu1: cleanup eMMC node
ARM: dts: vf610-zii-dev: enable vf610 builtin temp sensor
ARM: dts: imx7d: use operating-points-v2 for cpu
ARM: dts: imx7s-warp: remove unnecessary cpu regulator supply
ARM: dts: imx7d: correct cpu supply name for voltage scaling
ARM: dts: imx51-zii-rdu1: limit usbh1 to full-speed
ARM: dts: imx6/7: Remove unit-address from anatop regulators
ARM: dts: imx: Switch NXP boards to SPDX identifier
ARM: dts: imx6qdl-phytec-pfla02: Use IRQ_TYPE specifier
ARM: dts: imx53-voipac-dmm-668: Use IRQ_TYPE specifier
ARM: dts: imx53-qsb: Use IRQ_TYPE specifier
ARM: dts: vf-colibri-eval-v3: Use IRQ_TYPE specifier
ARM: dts: imx6q-gk802: Do not hardcode input codes
ARM: dts: imx53-smd: Do not hardcode input codes
ARM: dts: imx53-ard: Do not hardcode input codes
ARM: dts: imx7: Fix error in coresight TPIU graph connection
ARM: dts: imx53: Fix LDB OF graph warning
ARM: dts: imx: fix IPU OF graph endpoint node names
ARM: dts: imx: Switch to SPDX identifier
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- add support for meson8m2 SoC
- new board: Tronsmart MXIII Plus using meson8m2 SoC
- odroid-c1: add IR
-----BEGIN PGP SIGNATURE-----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=+PvJ
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Amlogic 32-bit DT updates for v4.18
- add support for meson8m2 SoC
- new board: Tronsmart MXIII Plus using meson8m2 SoC
- odroid-c1: add IR
* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus
ARM: dts: meson8: add the uart_A pins
ARM: dts: meson: add support for the Meson8m2 SoC
ARM: meson: add support for the Meson8m2 SoCs
ARM: dts: meson8b: odroid-c1: enable the IR receiver
ARM: dts: meson8b: odroid-c1: sort nodes alphabetically
ARM: dts: meson8b: add the cortex-a5-pmu compatible PMU
ARM: dts: meson8: add the cortex-a9-pmu compatible PMU
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds a DTS file for Sony Xperia Z1 Compact with support for
regulators, serial UART, eMMC/SD-card, USB, charger, backlight,
coincell and buttons.
Work based on arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts.
Signed-off-by: Attila Szöllősi <ata2001@airmail.cc>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
S2600WF is a Intel platform family with an ASPEED AST2500 BMC.
Signed-off-by: James Feist <james.feist@linux.intel.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The Inventec Lanyang is Power 9 platform with ast2500 BMC.
Signed-off-by: Brian Yang <yang.brianc.w@inventec.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Initial introduction of Portwell Neptune family equipped with
Aspeed 2500 BMC SoC. Neptune is a x86 server development kit with a
ASPEED ast2500 BMC manufactured by Portwell. Specifically, This
adds the neptune platform device tree file including the flash
layout used by the neptune machines.
Signed-off-by: Amithash Prasad <amithash@fb.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Valve Steam Link is a consumer device built around the Marvell BG2CD SoC.
This board file enables the UART, USB and Ethernet interfaces as well as
internal I2C and SDIO, and adds SoC voltage regulator and board-specific
GPIO restart method info.
Cc: Sam Lantinga <saml@valvesoftware.com>
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Currently there are two identical Kconfig options where only differences
are the Kconfig help text and the list of .dtbs that are built:
- MACH_MESON8
- MACH_MESON8B
Build the Meson8b .dtbs when MACH_MESON8 is selected to get rid of the
latter Kconfig symbol later.
Suggested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
With the new rev.E of A20-SOM-EVB, there is option for 16GB eMMC.
Currently used card is KLMAG2GEND, wired to MMC2 slot.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
1. Add support for USB OTG port on Origen board.
2. Allow earlycon on Rinato board.
3. Cleanup from obsolete properties.
4. Fix DTC warnings.
5. Remove Exynos5440 entirely.
6. Add mem-2-mem Scaler devices.
-----BEGIN PGP SIGNATURE-----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=1XLN
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Samsung DTS ARM changes for v4.18
1. Add support for USB OTG port on Origen board.
2. Allow earlycon on Rinato board.
3. Cleanup from obsolete properties.
4. Fix DTC warnings.
5. Remove Exynos5440 entirely.
6. Add mem-2-mem Scaler devices.
* tag 'samsung-dt-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Update x and y properties for mms114 touchscreen
ARM: dts: exynos: Add mem-2-mem Scaler devices
ARM: dts: s3c64xx: Remove skeleton.dtsi and fix DTC warnings for /memory
ARM: dts: s3c24xx: Fix unnecessary address/size cells DTC warnings
ARM: dts: s3c24xx: Remove skeleton.dtsi and fix DTC warning for /memory
ARM: dts: exynos/s3c: Remove leading 0x and 0s from bindings notation
ARM: dts: exynos: Remove Exynos5440
ARM: dts: exynos: Remove unnecessary address/size properties in dp-controller of Exynos5
ARM: dts: exynos: Bring order in fixed-regulators naming in Midas boards
ARM: dts: exynos: Remove regulators node container in Origen and N710x
ARM: dts: exynos: Remove unnecessary address/size properties in Origen
ARM: dts: exynos: Remove unnecessary address/size properties in Midas boards
ARM: dts: exynos: Fix invalid node referenced by i2c20 alias in Peach Pit and Pi
ARM: dts: exynos: Move syscon poweroff and restart nodes under the PMU
ARM: dts: exynos: Remove obsolete clock properties from power domains
ARM: dts: exynos: Add serial path for Rinato board to get earlycon support
ARM: dts: exynos: Add support for USB OTG port on Origen board
Signed-off-by: Olof Johansson <olof@lixom.net>
for 4.18, please pull the following:
- Stefan provides updates to the BCM2835 RNG Device Tree binding and
Device Tree node by adding its missing interrupt line.
- Rafal switches the Luxul XWC-1000 and the D-Link DIR-885L to the new
partitions syntax which allows specifying a partition parser
- Rafal also updates a bunch of BCM5301X Device Tree source files to a
more standard SPDX tag and dual GPL 2.0 and MIT. This is a follow-up
to this discussion with Greg:
https://lkml.org/lkml/2018/4/28/179
- Dan adds support for two Luxul devices: XAP-1610 (based on BCM47094)
and XWR-3150 V1 (similar to XWR-3100)
- Stefan provides a set of updates to the BCM283x Device Tree sources to
support the Raspberry Pi 3 B+ for both the ARM and ARM64 kernels. He
adds the required nodes for the LAN7515 USB Ethernet, Cypress CYW43455
BT/WiFi combo chip. Stefan also provides a few fixes for the PWM pin
assignment for RPi 3B and Zero/Zero W. Finally, Stefan adds the
missing GPIOs for controlling additional peripherals now that support
for the RPi 3 GPIO expander has landed
-----BEGIN PGP SIGNATURE-----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=R36h
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.18/devicetree' of https://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM-based SoC Device Tree changes
for 4.18, please pull the following:
- Stefan provides updates to the BCM2835 RNG Device Tree binding and
Device Tree node by adding its missing interrupt line.
- Rafal switches the Luxul XWC-1000 and the D-Link DIR-885L to the new
partitions syntax which allows specifying a partition parser
- Rafal also updates a bunch of BCM5301X Device Tree source files to a
more standard SPDX tag and dual GPL 2.0 and MIT. This is a follow-up
to this discussion with Greg:
https://lkml.org/lkml/2018/4/28/179
- Dan adds support for two Luxul devices: XAP-1610 (based on BCM47094)
and XWR-3150 V1 (similar to XWR-3100)
- Stefan provides a set of updates to the BCM283x Device Tree sources to
support the Raspberry Pi 3 B+ for both the ARM and ARM64 kernels. He
adds the required nodes for the LAN7515 USB Ethernet, Cypress CYW43455
BT/WiFi combo chip. Stefan also provides a few fixes for the PWM pin
assignment for RPi 3B and Zero/Zero W. Finally, Stefan adds the
missing GPIOs for controlling additional peripherals now that support
for the RPi 3 GPIO expander has landed
* tag 'arm-soc/for-4.18/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Switch D-Link DIR-885L to the new partitions syntax
ARM: dts: BCM5301X: Relicense Asus RT-AC87U file to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Add DT for Luxul XAP-1610
ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1
ARM: dts: BCM5301X: Relicense Buffalo files to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense most DTS files to the GPL 2.0+ / MIT
arm64: dts: broadcom: Add reference to Raspberry Pi 3 B+
ARM: dts: bcm2837: Add Raspberry Pi 3 B+
dt-bindings: bcm: Add Raspberry Pi 3 B+
ARM: dts: bcm2837: Add missing GPIOs of Expander
ARM: dts: bcm283x: Fix PWM pin assignment
ARM: dts: BCM5301X: Switch Luxul XWC-1000 to the new fixed partitions syntax
ARM: bcm283x: Add missing interrupt for RNG block
dt-binding: rng: Add interrupt property for BCM2835
Signed-off-by: Olof Johansson <olof@lixom.net>
This series adds support for am335x-pockebeagle and also add missing
pinctrl configuration for am335x evm and beagle bone variants.
There are also changes to add missing omap3 oscillator clocks for audio,
and fixes am437x tps65218 irq type used for various board specific
files.
There are also few minor fixes included that are not urgent. The
fixes for n8x0 audio also depend on driver changes, and the hp t410
mmc card detect mux typo is harmless.
-----BEGIN PGP SIGNATURE-----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=y/p3
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.18/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Device tree changes for omap variants for v4.18 merge window
This series adds support for am335x-pockebeagle and also add missing
pinctrl configuration for am335x evm and beagle bone variants.
There are also changes to add missing omap3 oscillator clocks for audio,
and fixes am437x tps65218 irq type used for various board specific
files.
There are also few minor fixes included that are not urgent. The
fixes for n8x0 audio also depend on driver changes, and the hp t410
mmc card detect mux typo is harmless.
* tag 'omap-for-v4.18/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: correct invalid I/O definition for MMC/SD card detect on T410
ARM: dts: omap2420-n810: Correct the audio codec (tlv320aic33) node
ARM: dts: omap2420-n810: Enable McBSP2 for audio
ARM: dts: am437x-sk-evm: Correct tps65218 irq type
ARM: dts: am437x-epos-evm: Correct tps65218 irq type
ARM: dts: am437x-cm-t43: Correct tps65218 irq type
ARM: dts: am437x-gp-evm: Correct tps65218 irq type
ARM: dts: Add am335x-pocketbeagle
ARM: dts: am33xx: Add pinmux data for mmc1 in am335x-evm, evmsk and beaglebone
ARM: dts: omap3-gta04: Add fixed 26MHz clock as fck for twl
ARM: dts: omap3-pandora: Add fixed 26MHz clock as fck for twl
ARM: dts: omap3-beagle-xm: Add fixed 26MHz clock as fck for twl
ARM: dts: logicpd-som-lv: Enable Touchscreen controller
Signed-off-by: Olof Johansson <olof@lixom.net>
Add MT7623N reference board with eMMC. On the board, there is additional
external PHY ICPlus IP1001 transceiver available by port 5 on the MDIO
bus connectted with GMAC2.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Suggested-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add MT7623A reference board with eMMC and NAND, respectively.
The both boards compared against MT7623N BPI-R2, we could see there are
UART[0-1] and USB2 being removed, I2C2 and SPI1 being added, I2C1, UART2
owning distinct pin usage and an extra WM8960 codec chip plugged into the
I2C1 offering the functionality of audio player and recorder through
SoC audio front-end engine (AFE).
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Suggested-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The Tronsmart MXIII Plus is an Android TV box which uses the Amlogic
S812 (Meson8m2) SoC. It uses a Realtek RTL8211F RGMII Ethernet PHY as
well as a Ricoh RN5T618 system power controller. It also comes with an
Ampak AP6330 SDIO wifi/Bluetooth combo chip (support for wifi and
Bluetooth is currently not added because the Linux drivers currently
only support one MMC controller and that is used for the SD card).
Signed-off-by: Oleg Ivanov <balbes-150@yandex.ru>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
It's an access point based on BCM47094 SoC with two BCM4366E wireless
chipsets.
Signed-off-by: Dan Haab <dan.haab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Luxul XWR-3150 is a wireless router similar to the XWR-3100 except:
1) It has more RAM
2) Its NAND controller in running in BCH8 mode
3) LAN ports LEDs are hardware controlled
Signed-off-by: Dan Haab <dan.haab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The U8540 was an evolved version of the U8500, but it was never
mass produced or put into products, only reference designs exist.
The upstream support was never completed and it is unlikely that
this will happen so drop the support for now to simplify
maintenance of the U8500.
Cc: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Exynos5440 (quad-core A15 with GMAC, PCIe, SATA) was targeting
server platforms but it did not make it to the market really. There are
no development boards with it and probably there are no real products
neither. The development for Exynos5440 ended in 2013 and since then
the platform is in maintenance mode.
Remove all Device Tree sources for Exynos5440, as first step of removal
of the platform to simplify the code and drivers.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andi Shyti <andi@etezian.org>
Reviewed-by: Rob Herring <robh@kernel.org>
PocketBeagle is an ultra-tiny-yet-complete open-source USB-key-fob computer.
This board family can be indentified by the A335PBGL in the at24 eeprom:
A2: [aa 55 33 ee 41 33 33 35 50 42 47 4c 30 30 41 32 |.U3.A335PBGL00A2|]
http://beagleboard.org/pockethttps://github.com/beagleboard/pocketbeagle
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
CC: Tony Lindgren <tony@atomide.com>
CC: Jason Kridner <jkridner@beagleboard.org>
CC: Drew Fustini <drew@beagleboard.org>
CC: Peter Robinson <pbrobinson@redhat.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch adds a device tree file for the H2+ version of the Libre
Computer Board ALL-H3-CC. It is the same board first introduced in
commit 6ca358645d ("ARM: dts: sun8i: h3: Add dts file for Libre
Computer Board ALL-H3-CC H3 ver."), with the H3 SoC replaced with
the H2+ SoC, and has only two 2Gb DDR3 chips instead of four.
The device tree utilizes the common board design file for ALL-H3-CC,
providing just the model strings and SoC specifics.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The dtb entry for the Banana Pi M2 Zero in the device tree makefile
somehow ended up in between two Orange Pi boards.
Move it so the list is properly sorted.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The Nintendo NES/SuperNES features an R16 already well supported in
mainline.
The console over UART0 may be wired on two ports of the R16, both
available on the NES Classic PCB.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The Raspberry Pi 3 B+ has the following major differences compared
to the model 3 B:
* Microchip LAN7515 (Gigabit Ethernet with integrated USB 2.0 HUB)
* Cypress CYW43455 (802.11n/ac and BT 4.2)
We need to add the USB LAN chip so the bootloader can add the MAC address.
This is necessary because there ain't an EEPROM or a valid OTP.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
i.CoreM6 1.5 is an another i.CoreM6 QDL cpu modules which can be connected
to EDIMM starter kit design with eMMC and MIPI-CSI interfaces suitable for
Android and video capture application.
notable features:
CPU NXP i.MX6 S/DL/D/Q, Up to 4 x Cortex-A9@800MHz
Memory Up to 2 GB DDR3-1066
Video Interfaces Up to 1 Parallel Up to 2 LVDS HDMI 1.4
port 8 bit CSI INPUT MIPI-CSI INPUT
1 x 10/100 Ethernet interface, 2 x USB, 1 x PCIe, 1 x I2S etc
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the DH i.MX6 Quad based SoM and a PDK2 evaluation board.
The evaluation board features three serial ports, USB OTG, USB host with
an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, mSATA, analog audio,
PCIe and HDMI video output.
All of the aforementioned features are supported by this patch.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for iWave iW-RainboW-G23S single board computer based on
RZ/G1C.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Here is our usual bunch of changes to the common DTSI shared between arm
and arm64, and their associated device trees.
Even though the diffstat is quite big, it's been mostly just cleanups. The
big feature is that the HDMI is now suported on H3 and H5 boards.
-----BEGIN PGP SIGNATURE-----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=hXvM
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Pull "Allwinner H3/H5 changes for 4.17" from Maxime Ripard:
Here is our usual bunch of changes to the common DTSI shared between arm
and arm64, and their associated device trees.
Even though the diffstat is quite big, it's been mostly just cleanups. The
big feature is that the HDMI is now suported on H3 and H5 boards.
* tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: H5: Add Xunlong Orange Pi Zero Plus
ARM: dts: sun8i-h3: Add Mali node
ARM64: dts: sun50i: h5: Enable HDMI output on H5 boards
ARM: dts: sun8i: h3: Enable HDMI output on H3 boards
ARM: dts: sunxi: h3/h5: Add HDMI pipeline
ARM: dts: sun8i: h2-plus: remove unnecessary mmc1_pins node
ARM: dts: sunxi: h3-h5: rename mmc0_pins_a and mmc1_pins_a
ARM: dts: sunxi: h3-h5: Move pinctrl of mmc1 from dts to dtsi
ARM: dts: sunxi: h3-h5: Move pinctrl of mmc0 from dts to dtsi
ARM: dts: sunxi: h3-h5: remove mmc0 card detection pin from pinctrl
ARM: dts: sun8i: h2+: add support for Banana Pi M2 Zero board
ARM: dts: sunxi: Switch MMC nodes away from cd-inverted property
ARM: dts: nanopi-neo-air: Add WiFi / eMMC
There is a bunch of significant additions for this release cycle:
- The A83t now has HDMI support
- The A80 finally has SMP support (without PSCI, unfortunately)
- The A80 has preliminary display support
And also:
- a number of boards based on old (A10, A20) SoCs now have the HDMI
support enabled.
- The display frontend is enabled on the A33, allowing to use it for
hardware display scaling
- New boards: Olimex A20-SOM204 variants
-----BEGIN PGP SIGNATURE-----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=S3LW
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Pull "Allwinner DT changes for 4.17" from Maxime Ripard:
There is a bunch of significant additions for this release cycle:
- The A83t now has HDMI support
- The A80 finally has SMP support (without PSCI, unfortunately)
- The A80 has preliminary display support
And also:
- a number of boards based on old (A10, A20) SoCs now have the HDMI
support enabled.
- The display frontend is enabled on the A33, allowing to use it for
hardware display scaling
- New boards: Olimex A20-SOM204 variants
* tag 'sunxi-dt-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (39 commits)
ARM: dts: sun9i: cubieboard4: Enable VGA display output
ARM: dts: sun9i: Add pinmux settings for LCD0 RGB888 output.
ARM: dts: sun9i: Add device nodes for documented display pipelines for A80
ARM: dts: sun8i: reference tablet design: Enable PMIC power supplies
ARM: dts: sun8i: a33: Enable A33 internal audio codec on A33-OLinuXino
ARM: dts: sun8i: a33: Enable PMIC power supplies on A33-OLinuXino
ARM: dts: sun8i: a33: Drop sunxi-common-regulators.dtsi for A33-OLinuXino
ARM: dts: sun8i: a33: Drop GPIO pinmux settings for A33-OLinuXino
ARM: dts: sun9i: Add enable-method for SMP support for the A80 SoC
ARM: dts: sun8i: h3: Add eMMC for NanoPi M1 Plus
ARM: dts: sun8i: a711: set regulator for each cluster of CPUs
ARM: dts: sun8i: a83t: add stable OPP tables and CPUfreq
ARM: dts: sun8i: a83t: add cpu0 and cpu100 labels
ARM: dtsi: axp81x: remove IP name from DT node name
ARM: dtsi: sun8i: a711: enable battery power supply subnode
ARM: dtsi: axp81x: add battery power supply subnode
ARM: dtsi: axp81x: add node for ADC
ARM: dtsi: axp22x: add node for ADC
ARM: dtsi: axp209: add node for ADC
ARM: dts: sun7i: Enable HDMI support on the Orange Pi mini
...
define the VGA and panel connectors in preparation for DRM.
-----BEGIN PGP SIGNATURE-----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=0XCD
-----END PGP SIGNATURE-----
Merge tag 'armsoc-versatile-drm-dts' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt
Pull "DTS changes for RealView+Versatile" from Linus Walleij:
This augments the RealView and Versatile device trees to properly
define the VGA and panel connectors in preparation for DRM.
* tag 'armsoc-versatile-drm-dts' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: Augment panel setting for Versatile
ARM: dts: Add Versatile IB2 device tree
ARM: dts: Augment VGA connector bridge on Realview PBX
ARM: dts: Augment VGA connector bridge on Realview EB
ARM: dts: Augment VGA connector bridge on PB1176
ARM: dts: Augment VGA connector bridge on PB11MPcore
* Silk board with R-Car E2 (r8a7794) SoC
- Add r1ex24002 EEPROM to DT
Magnus Damm says "Extend the Silk board support to include U14 which is
an I2C based EEPROM hooked up to the I2C1 bus."
- Add GPIO keys to DT
Magnus Damm says "Extend the Silk board support to include SW3, SW4,
SW6 and SW12. They are all connected via GPIO lines and handled by the
gpio-keys driver"
* Marzen board with R-Car H1 (r7a7779) SoC
- Add SDHI0 VCCQ Regulator
Magnus Damm says "Add support for the on-board voltage regulator hooked
up to GPIO3_20 on r8a7779 Marzen. The board schematics describes the
regulator as U4 TPS2110A. Input wise, U4 has D0 fixed to ground, D1
tied to GPIO3_20 while IN1 is fixed to 3.3V and IN2 is fixed to 1.8V.
OUT goes to the pull-ups for the data pins of SDHI0."
* Porter board with R-Car M3W (r8a7791) SoC
- Fix HDMI output routing
Laurent Pinchart says "The HDMI encoder is connected to the RGB output
of the DU, which is port@0, not port@1."
* iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) and
iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
- Enable cmt0
* Stout board with R-Car H2 (r8a7790) SoC
- Initial support
* Lager board with R-Car H2 (r8a7790) SoC
- Add CEC clock for HDMI transmitter
Niklas Söderlund says "The adv7511 on the Lager board has a 12 MHz
fixed clock for the CEC block. Specify this in the dts to enable CEC
support."
- Move cec_clock to root node
By definition nodes without a bus address do not belong on the bus
* kzm9d board with EMMA Mobile EV2 (EMEV2) SoC
- Fix "debounce-interval" property misspelling
* RZ/G1M (r8a7743) and RZ/G1H (r8a7745) SoCs
- Add IPMMU DT nodes
- Add VSP support
* R-Car Gen2 boards
- Use I2C demuxer for
This allows run-time switching between alternate I2C IP blocks
* R-Car Gen2 and RZ/G1 SoCs
- Clean up DT files to ease future maintenance
+ add soc node for IP attached to the bus
+ sort subnodes of soc and root node
+ consistently use single space after =
* R-Car H2 (r8a7790), M3-W (r8a7791) and M3-N (r7a7793) SoCs
- Reduce size of thermal registers
According to the "User's Manual: Hardware" v2.00 the registers at base
0xe61f0000 extend to an offset of 0x10, rather than 0x14 which is the
case on the r8a73a4 (R-Mobile APE6).
This should not have any runtime affect as mapping granularity is
PAGE_SIZE.
-----BEGIN PGP SIGNATURE-----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=dZnw
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Renesas ARM Based SoC DT Updates for v4.17" from Simon Horman:
* Silk board with R-Car E2 (r8a7794) SoC
- Add r1ex24002 EEPROM to DT
Magnus Damm says "Extend the Silk board support to include U14 which is
an I2C based EEPROM hooked up to the I2C1 bus."
- Add GPIO keys to DT
Magnus Damm says "Extend the Silk board support to include SW3, SW4,
SW6 and SW12. They are all connected via GPIO lines and handled by the
gpio-keys driver"
* Marzen board with R-Car H1 (r7a7779) SoC
- Add SDHI0 VCCQ Regulator
Magnus Damm says "Add support for the on-board voltage regulator hooked
up to GPIO3_20 on r8a7779 Marzen. The board schematics describes the
regulator as U4 TPS2110A. Input wise, U4 has D0 fixed to ground, D1
tied to GPIO3_20 while IN1 is fixed to 3.3V and IN2 is fixed to 1.8V.
OUT goes to the pull-ups for the data pins of SDHI0."
* Porter board with R-Car M3W (r8a7791) SoC
- Fix HDMI output routing
Laurent Pinchart says "The HDMI encoder is connected to the RGB output
of the DU, which is port@0, not port@1."
* iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) and
iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
- Enable cmt0
* Stout board with R-Car H2 (r8a7790) SoC
- Initial support
* Lager board with R-Car H2 (r8a7790) SoC
- Add CEC clock for HDMI transmitter
Niklas Söderlund says "The adv7511 on the Lager board has a 12 MHz
fixed clock for the CEC block. Specify this in the dts to enable CEC
support."
- Move cec_clock to root node
By definition nodes without a bus address do not belong on the bus
* kzm9d board with EMMA Mobile EV2 (EMEV2) SoC
- Fix "debounce-interval" property misspelling
* RZ/G1M (r8a7743) and RZ/G1H (r8a7745) SoCs
- Add IPMMU DT nodes
- Add VSP support
* R-Car Gen2 boards
- Use I2C demuxer for
This allows run-time switching between alternate I2C IP blocks
* R-Car Gen2 and RZ/G1 SoCs
- Clean up DT files to ease future maintenance
+ add soc node for IP attached to the bus
+ sort subnodes of soc and root node
+ consistently use single space after =
* R-Car H2 (r8a7790), M3-W (r8a7791) and M3-N (r7a7793) SoCs
- Reduce size of thermal registers
According to the "User's Manual: Hardware" v2.00 the registers at base
0xe61f0000 extend to an offset of 0x10, rather than 0x14 which is the
case on the r8a73a4 (R-Mobile APE6).
This should not have any runtime affect as mapping granularity is
PAGE_SIZE.
* tag 'renesas-dt-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (47 commits)
ARM: dts: silk: Add GPIO keys to DT
ARM: dts: silk: Add r1ex24002 EEPROM to DT
ARM: dts: marzen: Add SDHI0 VCCQ Regulator
ARM: dts: stout: Initial r8a7790 Stout board support
ARM: dts: lager: Move cec_clock to root node
ARM: dts: kzm9d: Fix "debounce-interval" property misspelling
ARM: dts: gose: use demuxer for I2C4
ARM: dts: gose: use demuxer for I2C2
ARM: dts: silk: use demuxer for I2C1
ARM: dts: alt: use demuxer for I2C1
ARM: dts: porter: use demuxer for I2C2
ARM: dts: koelsch: use demuxer for I2C4
ARM: dts: koelsch: use demuxer for I2C2
ARM: dts: lager: use demuxer for IIC3/I2C3
ARM: dts: lager: use demuxer for IIC2/I2C2
ARM: dts: r8a7745: Add VSP support
ARM: dts: r8a7743: Add VSP support
ARM: dts: r8a7745: Add IPMMU DT nodes
ARM: dts: r8a7743: Add IPMMU DT nodes
ARM: dts: r8a7745: sort subnodes of soc node
...
Support for the VDE is added on Tegra30 along with some general cleanup
and some improvements to the various Toradex boards.
-----BEGIN PGP SIGNATURE-----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=Dqxp
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.17-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
Pull "ARM: tegra: Device tree changes for v4.17-rc1" from Thierry Reding:
Support for the VDE is added on Tegra30 along with some general cleanup
and some improvements to the various Toradex boards.
* tag 'tegra-for-4.17-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: apalis-tk1: Support v1.2 hardware revision
ARM: tegra: apalis-tk1: Copyright period, spurious newlines
ARM: tegra: apalis-tk1: Hog group for ethernet, PCIe, reset GPIOs
ARM: tegra: apalis-tk1: Add missing as3722 gpio0 configuration
ARM: tegra: apalis-tk1: Activate PWM pin muxing for pwm3
ARM: tegra: apalis-tk1: Set critical trips
ARM: tegra: apalis/colibri: Remove unneeded reg property
ARM: tegra: apalis/colibri: Use correct compatible for RTC
ARM: tegra: Fix I2C bus frequencies on Apalis/Colibri
ARM: tegra: venice2: Remove duplicate pcie-1 node
ARM: tegra: beaver: Remove invalid uses of rsvd1
ARM: tegra: Use proper IRQ type definitions
ARM: tegra: Fix ULPI regression on Tegra20
ARM: tegra: Add unit address to VDE IRAM area
ARM: tegra: Add video decoder node on Tegra30
ARM: tegra: Add IRAM node on Tegra30
The Versatile board can be equipped with a interface board
just named "IB2". This was created in the early 2000s for
prototyping GSM candybar phone form factor products.
The IB2 board contains:
- Cascaded interrupt controller
- Enfora Enabler GSM0308 quad-band module with antenna and
separate audio jack
- Keypad with joystick
- Sanyo 2.5" color display
- A 28-pin connector for mounting a camera
This adds a DTS file for the combination of the Versatile AB
with an IB2 daughterboard mounted, making the LED blink and
making the system controller available for drivers, such as
the panel driver.
The device tree bindings already exist in
Documentation/devicetree/bindings/arm/arm-boards.
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Stout base board support making use of 1 GiB of memory,
the Renesas H2 r8a7790 SoC with the SCIFA0 serial port
and CA15 with ARM architected timer.
Furthermore, this device tree contains entries for:
- 4x LEDs
- SDHI SD/MMC controller
- Display unit with HDMI output
- SH fast ethernet controller
- QSPI controller with S25FL512S attached to it
- I2C controller with DA9210 and DA 9063 PMICs
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Updates to OpenPower BMC systems:
A number of updates to use recently merged drivers, including moving to
upstreamed IPMI BT nodes, a temp sensor for Romulus, and adding
simple-reset for UARTs.
This includes more of Palmetto's device tree, so that it's ever so
close to booting the host with an upstream kernel.
New machines:
Add Qualcomm Centriq ARM64 server reference platform, which will run
OpenBMC on an AST2500.
-----BEGIN PGP SIGNATURE-----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=7HDC
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.17-devicetree' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt
Pull "ASPEED device tree updates for 4.17" from Joel Stanley:
Updates to OpenPower BMC systems:
A number of updates to use recently merged drivers, including moving to
upstreamed IPMI BT nodes, a temp sensor for Romulus, and adding
simple-reset for UARTs.
This includes more of Palmetto's device tree, so that it's ever so
close to booting the host with an upstream kernel.
New machines:
Add Qualcomm Centriq ARM64 server reference platform, which will run
OpenBMC on an AST2500.
* tag 'aspeed-4.17-devicetree' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed: Add Qualcomm Centriq 2400 REP BMC
ARM: dts: aspeed: romulus: Add w83773g temp sensor
ARM: dts: aspeed: romulus: hog GPIOS7
ARM: dts: romulus: Remove MAX31785 device
ARM: dts: palmetto: Request mux as per strapping configuration
ARM: dts: palmetto: Enable rear UART
ARM: dts: aspeed: Add LPC reset controller node
ARM: dts: aspeed: Add Palmetto GPIO hogs
ARM: dts: palmetto: Add LEDs and GPIO keys
ARM: dts: aspeed: Add LPC clock phandles
ARM: dts: aspeed-g5: Update LPC node
ARM: dts: aspeed: Enable IPMI BT node on OpenPower machines
ARM: dts: aspeed: Add IPMI BT node
The Qualcomm Centriq 2400 REP (Reference Evaluation Platform) is
an aarch64 Armv8 server platform with an ast2520 BMC.
Signed-off-by: Ken Chen <chen.kenyy@inventec.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This DTS has support for the Samsung Galaxy S5 (codenamed klte).
Initial version have support just for serial console.
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Daniele Debernardi <drebrez@gmail.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Support the V1.2 hardware revision with the following pin muxing
changes:
Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4
are now used as DDC pins.
Gen2_i2c_scl_pt5 and gen2_i2c_sda_pt6 previously used as DDC pins are
now used as USB power enable signals.
Usb_vbus_en0_pn4 and usb_vbus_en1_pn5 previously used as USB power
enable signals are now used as GPIO3 and GPIO4.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This add a DTS for the Digilent Zybo Z7 board.
This board is the successor board of Zybo, these are almost the same except
for ps-clk-frequency specifications.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu@cybertrust.co.jp>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, ethernet, i2c, qspi, spi and uart.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, 2x i2c, nor flash, spi and uart.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, i2c, nand uart, spi and usb.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
The board contains 7z010 with 512MB memory, ethernet, qspi, uart, usbs
and sd. But board is not supporting booting from sd card.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
1. Add WiFi to Artik 5 board.
2. Remove unused samsung_k3pe0e000b memory DTSI.
3. Add few remaining SPDX license identifiers.
4. Refactor Exynos4 by using labels for overriding/extending nodes and
moving respective nodes under the 'soc' node.
5. Add three new Exynos4412-based boards: GT-I9300 (Samsung Galaxy S3),
GT-I9305 (Samsung Galaxy S3 LTE) and GT-N7100/N7105 (Samsung Note 2).
They are based heavily on existing Trats2 board.
6. Fix PMIC interrupts on Trats board.
7. Fix IOMMU for GScaler devices on Exynos5250.
8. Minor fixes in unit addresses pointed by DTC.
9. Minor cleanups from unused properties and duplicated code.
-----BEGIN PGP SIGNATURE-----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=WjCX
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Pull "Samsung DTS ARM changes for v4.17" from Krzysztof Kozłowski:
1. Add WiFi to Artik 5 board.
2. Remove unused samsung_k3pe0e000b memory DTSI.
3. Add few remaining SPDX license identifiers.
4. Refactor Exynos4 by using labels for overriding/extending nodes and
moving respective nodes under the 'soc' node.
5. Add three new Exynos4412-based boards: GT-I9300 (Samsung Galaxy S3),
GT-I9305 (Samsung Galaxy S3 LTE) and GT-N7100/N7105 (Samsung Note 2).
They are based heavily on existing Trats2 board.
6. Fix PMIC interrupts on Trats board.
7. Fix IOMMU for GScaler devices on Exynos5250.
8. Minor fixes in unit addresses pointed by DTC.
9. Minor cleanups from unused properties and duplicated code.
* tag 'samsung-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (29 commits)
ARM: dts: exynos: Fix IOMMU support for GScaler devices on Exynos5250
ARM: dts: exynos: Remove unused bypass-smu property from Xyref5260
ARM: dts: exynos: Add missing interrupts property to PMIC on Trats board
ARM: dts: exynos: Fix unit addresses of PDMA nodes in Exynos5410
ARM: dts: exynos: Fix address of PPMU ACP on Exynos4210
ARM: dts: exynos: Cleanup power domain nodes in exynos3250.dtsi
ARM: dts: exynos: Add touchscreen node to Exynos4412 N710x
ARM: dts: exynos: Add Samsung's Exynos4412-based Midas boards
ARM: dts: exynos: Split Trats2 DTS in preparation for Midas boards
ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes
dt-bindings: samsung: Document bindings for Midas family boards
ARM: dts: exynos: Add soc node to exynos4412
ARM: dts: exynos: Add soc node to exynos4210
ARM: dts: exynos: Add soc node to exynos4
ARM: dts: exynos: Add soc node to exynos5440
ARM: dts: exynos: Use pmu label in exynos4412
ARM: dts: exynos: Remove duplicated inclusion of syscon restart nodes on Exynos5410
ARM: dts: exynos: Use label instead of full path in exynos4412-itop-elite
ARM: dts: exynos: Use labels instead of full paths in exynos4412-trats2
ARM: dts: exynos: Use label instead of full path in exynos4412-odroid-common
...
Highlights:
-----------
-Add support of STM32MP157 MPU and stm32mp157c eval board
-Add SD supports on F4 and F7 boards
-Add leds support on stm32f469 and stm32f769 disco boards
-Add push button support on stm32f469 and stm32f769 disco boards
-Add EXTI, SPI, RTC, USB HS/FS support on STM32H743 MCU
-Add RTC and USB OTG HS on stm32f769-disco
-Use dedicated files for F7 pinctrl
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=osrs
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v4.17-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt
Pull "STM32 DT updates for v4.17, round 1" from Alexandre Torgue:
Highlights:
-----------
-Add support of STM32MP157 MPU and stm32mp157c eval board
-Add SD supports on F4 and F7 boards
-Add leds support on stm32f469 and stm32f769 disco boards
-Add push button support on stm32f469 and stm32f769 disco boards
-Add EXTI, SPI, RTC, USB HS/FS support on STM32H743 MCU
-Add RTC and USB OTG HS on stm32f769-disco
-Use dedicated files for F7 pinctrl
* tag 'stm32-dt-for-v4.17-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits)
ARM: dts: stm32: Fix sdio2 rcc hard coded value
dt-bindings: mfd: Add STM32F7 SDMMC2 rcc entry
ARM: dts: stm32: Enable sdio1 for stm32f769-disco
ARM: dts: stm32: Enable sdio1 for stm32f746-eval
ARM: dts: stm32: Enable sdio1 for stm32f746-disco
ARM: dts: stm32: Add sdio pins definition for stm32f7
ARM: dts: stm32: add SPI support on STM32H743 SoC
ARM: dts: stm32: enable RTC on stm32h743i-eval
ARM: dts: stm32: add RTC support on STM32H743
ARM: dts: stm32: enable USB OTG HS on stm32h743i-eval
ARM: dts: stm32: add USB OTG HS and FS support for STM32H743 SoC
ARM: dts: stm32: enable RTC on stm32f769-disco
ARM: dts: stm32: enable USB HS on stm32f769-disco
ARM: dts: stm32: select otg mode for usbotg_hs on stm32746g_eval
ARM: dts: stm32: add gadget fifo sizes to usbotg_hs on stm32f746
ARM: dts: stm32: Add push button to stm32f769 Discovery board
ARM: dts: stm32: Add push button to stm32f469 Discovery board
ARM: dts: stm32: Add leds support to stm32f769 Discovery board
ARM: dts: stm32: Add leds support to stm32f469 Discovery board
ARM: dts: stm32: Fix HSE clock frequency for stm32h743i-disco board
...
This series of changes updates the device tree files for omaps:
- Nokia N9 support for magnetometer
- Update at24 to use atmel as manufacturer for am335x-boneblue
- Add support for am33xx based PDU001 board
- Update Droid 4 touchscreen for reset-gpios and add audio
codec and soundcard
- Remove unused dra7 cooling level nodes
- A series of changes to configure am335x and am437x for PM
- Add pinmuxing for i2c2 and 3 for LogicPD boards
- Add EMIF interrupt infor for am437x and am335x
- Add missing omap3 sound-dai-cells
-----BEGIN PGP SIGNATURE-----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=SDoJ
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.17/dt-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "Device tree changes for omap variants for v4.17" from Tony Lindgren:
This series of changes updates the device tree files for omaps:
- Nokia N9 support for magnetometer
- Update at24 to use atmel as manufacturer for am335x-boneblue
- Add support for am33xx based PDU001 board
- Update Droid 4 touchscreen for reset-gpios and add audio
codec and soundcard
- Remove unused dra7 cooling level nodes
- A series of changes to configure am335x and am437x for PM
- Add pinmuxing for i2c2 and 3 for LogicPD boards
- Add EMIF interrupt infor for am437x and am335x
- Add missing omap3 sound-dai-cells
* tag 'omap-for-v4.17/dt-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
ARM: dts: omap4-droid4: add soundcard
ARM: dts: motorola-cpcap-mapphone: add audio-codec
ARM: dts: omap3: Add missing #sound-dai-cells
ARM: dts: am43xx: add emif interrupt info
ARM: dts: am33xx: add emif interrupt info
ARM: dts: Add pinmuxing for i2c2 and i2c3 for LogicPD SOM-LV
ARM: dts: Add pinmuxing for i2c2 and i2c3 for LogicPD torpedo
ARM: dts: am4372: Mark omap_l3_noc with ti,no-idle
ARM: dts: am4372: Mark emif with ti,no-idle
ARM: dts: am33xx: Mark emif with ti,no-idle
ARM: dts: am4372: Add soc node
ARM: dts: am33xx: Add pm-sram phandle to soc node
ARM: dts: am4372: Update emif node
ARM: dts: am33xx: Update emif node
ARM: dts: am4372: Reserve pm code and data regions in ocmcram sram node
ARM: dts: am33xx: Reserve pm code and data regions in ocmcram sram node
ARM: dts: omap: Remove "cooling-{min|max}-level" for CPU nodes
ARM: dts: omap4-droid4: update touchscreen
ARM: dts: am33xx: add PDU001 board
ARM: dts: use 'atmel' as at24 manufacturer in am335x-boneblue
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a common device tree for all Nuvoton NPCM750 BMCs and a board
specific device tree for the NPCM750 (Poleg) evaluation board.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Avi Fishman <avifishman70@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Tomer Maimon <tmaimon77@gmail.com>
Tested-by: Avi Fishman <avifishman70@gmail.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support of stm32mp157c evaluation board (part number: STM32MP157C-EV1)
split in 2 elements:
-Daughter board (part number: STM32MP157C-ED1)
which includes CPU, memory and power supply
-Mother board (part number: STM32MP157C-EM1)
which includes external peripherals (like display, camera,...)
and extension connectors.
The daughter board can run alone, this is why the device tree files
are split in two layers, for the complete evaluation board (ev1)
and for the daughter board alone (ed1).
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add support for Advantech DMS-BA16 board, which uses
the Advantech BA-16 module.
Signed-off-by: Ken Lin <yungching0725@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"Midas" is the codename for a family of smartphones released by Samsung
Mobile. It includes the Galaxy S3 (GT-I9300/I9305) and the Galaxy
Note 2 (GT-N7100/N7105). The boards largely have the same peripherals:
the main differences are touchscreen, display panel and cellular modem.
Signed-off-by: Simon Shields <simon@lineageos.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This patch adds support for the PDU001 board from EETS GmbH.
The board is built around the byteENGINE module AM335X from
bytes at work AG which in turn is built around a Sitara SoC
from TI.
Signed-off-by: Felix Brack <fb@ltec.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Banana Pi M2 Zero board is a H2+-based board by Sinovoip, with a form
factor and GPIO holes similar to Raspberry Pi Zero.
It features:
- Allwinner H2+ SoC
- Single-chip (16-bit) 512MiB DDR3 DRAM
- Ampak AP6212 Wi-Fi/Bluetooth module
- MicroSD slot
- Two MicroUSB Type-B ports (one can only be used to power the board and
the other features OTG functionality)
- Two keys, a reset and a GPIO-connected key.
- HDMI Type-C (miniHDMI) connector connected to the HDMI part of H2+.
- CSI connector to connect the camera sensor provided by Sinovoip.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
A20-SOM204 board has option with onboard 16GB eMMC.
The chip is wired to MMC2 slot.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
