This is a really useful function, but it's buried in the
copy_ccw_from_iova() routine so that ccwchain_calc_length()
can just work with Format-1 CCWs while doing its counting.
But it means we're translating a full 2K of "CCWs" to Format-1,
when in reality there's probably far fewer in that space.
Let's factor it out, so maybe we can do something with it later.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-5-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It doesn't make much sense to "hide" the copy to the channel_program
struct inside a routine that calculates the length of the chain.
Let's move it to the calling routine, which will later copy from
channel_program to the memory it allocated itself.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-4-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We already pinned/copied/unpinned 2K (256 CCWs) of guest memory
to the host space anchored off vfio_ccw_private. There's no need
to do that again once we have the length calculated, when we could
just copy the section we need to the "permanent" space for the I/O.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-3-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Rather than allocating/freeing a piece of memory every time
we try to figure out how long a CCW chain is, let's use a piece
of memory allocated for each device.
The io_mutex added with commit 4f76617378 ("vfio-ccw: protect
the I/O region") is held for the duration of the VFIO_CCW_EVENT_IO_REQ
event that accesses/uses this space, so there should be no race
concerns with another CPU attempting an (unexpected) SSCH for the
same device.
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-2-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With both the direct-addressed and indirect-addressed CCW paths
simplified to this point, the amount of shared code between them is
(hopefully) more easily visible. Move the processing of IDA-specific
bits into the direct-addressed path, and add some useful commentary of
what the individual pieces are doing. This allows us to remove the
entire ccwchain_fetch_idal() routine and maintain a single function
for any non-TIC CCW.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-10-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is purely deck furniture, to help understand the merge of the
direct and indirect handlers.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-9-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that both CCW codepaths build this nested array:
ccwchain->pfn_array_table[1]->pfn_array[#idaws/#pages]
We can collapse this into simply:
ccwchain->pfn_array[#idaws/#pages]
Let's do that, so that we don't have to continually navigate two
nested arrays when the first array always has a count of one.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-8-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that pfn_array_table[] is always an array of 1, it seems silly to
check for the very first entry in an array in the middle of two nested
loops, since we know it'll only ever happen once.
Let's move this outside the loops to simplify things, even though
the "k" variable is still necessary.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-7-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
While processing a channel program, we currently have two nested
arrays that carry a slightly different structure. The direct CCW
path creates this:
ccwchain->pfn_array_table[1]->pfn_array[#pages]
while an IDA CCW creates:
ccwchain->pfn_array_table[#idaws]->pfn_array[1]
The distinction appears to state that each pfn_array_table entry
points to an array of contiguous pages, represented by a pfn_array,
um, array. Since the direct-addressed scenario can ONLY represent
contiguous pages, it makes the intermediate array necessary but
difficult to recognize. Meanwhile, since an IDAL can contain
non-contiguous pages and there is no logic in vfio-ccw to detect
adjacent IDAWs, it is the second array that is necessary but appearing
to be superfluous.
I am not aware of any documentation that states the pfn_array[] needs
to be of contiguous pages; it is just what the code does today.
I don't see any reason for this either, let's just flip the IDA
codepath around so that it generates:
ch_pat->pfn_array_table[1]->pfn_array[#idaws]
This will bring it in line with the direct-addressed codepath,
so that we can understand the behavior of this memory regardless
of what type of CCW is being processed. And it means the casual
observer does not need to know/care whether the pfn_array[]
represents contiguous pages or not.
NB: The existing vfio-ccw code only supports 4K-block Format-2 IDAs,
so that "#pages" == "#idaws" in this area. This means that we will
have difficulty with this overlap in terminology if support for
Format-1 or 2K-block Format-2 IDAs is ever added. I don't think that
this patch changes our ability to make that distinction.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-6-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It is now pretty apparent that ccwchain_handle_ccw()
(nee ccwchain_handle_tic()) does everything that cp_init()
wants to do.
Let's remove that duplicated code from cp_init() and let
ccwchain_handle_ccw() handle it itself.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-5-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Refactor ccwchain_handle_tic() into a routine that handles a channel
program address (which itself is a CCW pointer), rather than a CCW pointer
that is only a TIC CCW. This will make it easier to reuse this code for
other CCW commands.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Extract the "does the target of this TIC already exist?" check from
ccwchain_handle_tic(), so that it's easier to refactor that function
into one that cp_init() is able to use.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-3-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The routine cp_free() does nothing but call cp_unpin_free(), and while
most places call cp_free() there is one caller of cp_unpin_free() used
when the cp is guaranteed to have not been marked initialized.
This seems like a dubious way to make a distinction, so let's combine
these routines and make cp_free() do all the work.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The hypervisor needs to interact with the summary indicators, so these
need to be DMA memory as well (at least for protected virtualization
guests).
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Before virtio-ccw could get away with not using DMA API for the pieces of
memory it does ccw I/O with. With protected virtualization this has to
change, since the hypervisor needs to read and sometimes also write these
pieces of memory.
The hypervisor is supposed to poke the classic notifiers, if these are
used, out of band with regards to ccw I/O. So these need to be allocated
as DMA memory (which is shared memory for protected virtualization
guests).
Let us factor out everything from struct virtio_ccw_device that needs to
be DMA memory in a satellite that is allocated as such.
Note: The control blocks of I/O instructions do not need to be shared.
These are marshalled by the ultravisor.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
This will come in handy soon when we pull out the indicators from
virtio_ccw_device to a memory area that is shared with the hypervisor
(in particular for protected virtualization guests).
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
The flag AIRQ_IV_CACHELINE was recently added to airq_iv_create(). Let
us use it! We actually wanted the vector to span a cacheline all along.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Protected virtualization guests have to use shared pages for airq
notifier bit vectors, because the hypervisor needs to write these bits.
Let us make sure we allocate DMA memory for the notifier bit vectors by
replacing the kmem_cache with a dma_cache and kalloc() with
cio_dma_zalloc().
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
As virtio-ccw devices are channel devices, we need to use the
dma area within the common I/O layer for any communication with
the hypervisor.
Note that we do not need to use that area for control blocks
directly referenced by instructions, e.g. the orb.
It handles neither QDIO in the common code, nor any device type specific
stuff (like channel programs constructed by the DASD driver).
An interesting side effect is that virtio structures are now going to
get allocated in 31 bit addressable storage.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
To support protected virtualization cio will need to make sure the
memory used for communication with the hypervisor is DMA memory.
Let us introduce one global pool for cio.
Our DMA pools are implemented as a gen_pool backed with DMA pages. The
idea is to avoid each allocation effectively wasting a page, as we
typically allocate much less than PAGE_SIZE.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
systemd-modules-load.service automatically tries to load the pkey module
on systems that have MSA.
Pkey also requires the MSA3 facility and a bunch of subfunctions.
Failing with -EOPNOTSUPP makes "systemd-modules-load.service" fail on
any system that does not have all needed subfunctions. For example,
when running under QEMU TCG (but also on systems where protected keys
are disabled via the HMC).
Let's use -ENODEV, so systemd-modules-load.service properly ignores
failing to load the pkey module because of missing HW functionality.
While at it, also convert the -EOPNOTSUPP in pkey_clr2protkey() to -ENODEV.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Convert all text files with s390 documentation to ReST format.
Tried to preserve as much as possible the original document
format. Still, some of the files required some work in order
for it to be visible on both plain text and after converted
to html.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
When a CQ-enabled device uses QEBSM for SBAL state inspection,
get_buf_states() can return the PENDING state for an Output Queue.
get_outbound_buffer_frontier() isn't prepared for this, and any PENDING
buffer will permanently stall all further completion processing on this
Queue.
This isn't a concern for non-QEBSM devices, as get_buf_states() for such
devices will manually turn PENDING buffers into EMPTY ones.
Fixes: 104ea556ee ("qdio: support asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Add missing parameter description to fix the following warning:
drivers/s390/cio/qdio_thinint.c:183: warning:
Function parameter or member 'floating' not described in 'tiqdio_thinint_handler'
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Within an EP11 cprb there exists a byte field flags. Bit 0x20
of this field indicates a special cprb. A special cprb triggers
special handling in the firmware below the OS layer.
However, a special cprb also needs to have the S bit in GPR0
set when NQAP is called. This was not the case for EP11 cprbs
and this patch now introduces the code to support this.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Formatting of Kconfig files doesn't look so pretty, so just
take damp cloth and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
If the CCW being processed is a No-Operation, then by definition no
data is being transferred. Let's fold those checks into the normal
CCW processors, rather than skipping out early.
Likewise, if the CCW being processed is a "test" (a category defined
here as an opcode that contains zero in the lowest four bits) then no
special processing is necessary as far as vfio-ccw is concerned.
These command codes have not been valid since the S/370 days, meaning
they are invalid in the same way as one that ends in an eight [1] or
an otherwise valid command code that is undefined for the device type
in question. Considering that, let's just process "test" CCWs like
any other CCW, and send everything to the hardware.
[1] POPS states that a x08 is a TIC CCW, and that having any high-order
bits enabled is invalid for format-1 CCWs. For format-0 CCWs, the
high-order bits are ignored.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-4-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It is possible that a guest might issue a CCW with a length of zero,
and will expect a particular response. Consider this chain:
Address Format-1 CCW
-------- -----------------
0 33110EC0 346022CC 33177468
1 33110EC8 CF200000 3318300C
CCW[0] moves a little more than two pages, but also has the
Suppress Length Indication (SLI) bit set to handle the expectation
that considerably less data will be moved. CCW[1] also has the SLI
bit set, and has a length of zero. Once vfio-ccw does its magic,
the kernel issues a start subchannel on behalf of the guest with this:
Address Format-1 CCW
-------- -----------------
0 021EDED0 346422CC 021F0000
1 021EDED8 CF240000 3318300C
Both CCWs were converted to an IDAL and have the corresponding flags
set (which is by design), but only the address of the first data
address is converted to something the host is aware of. The second
CCW still has the address used by the guest, which happens to be (A)
(probably) an invalid address for the host, and (B) an invalid IDAW
address (doubleword boundary, etc.).
While the I/O fails, it doesn't fail correctly. In this example, we
would receive a program check for an invalid IDAW address, instead of
a unit check for an invalid command.
To fix this, revert commit 4cebc5d6a6 ("vfio: ccw: validate the
count field of a ccw before pinning") and allow the individual fetch
routines to process them like anything else. We'll make a slight
adjustment to our allocation of the pfn_array (for direct CCWs) or
IDAL (for IDAL CCWs) memory, so that we have room for at least one
address even though no guest memory will be pinned and thus the
IDAW will not be populated with a host address.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-3-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The skip flag of a CCW offers the possibility of data not being
transferred, but is only meaningful for certain commands.
Specifically, it is only applicable for a read, read backward, sense,
or sense ID CCW and will be ignored for any other command code
(SA22-7832-11 page 15-64, and figure 15-30 on page 15-75).
(A sense ID is xE4, while a sense is x04 with possible modifiers in the
upper four bits. So we will cover the whole "family" of sense CCWs.)
For those scenarios, since there is no requirement for the target
address to be valid, we should skip the call to vfio_pin_pages() and
rely on the IDAL address we have allocated/built for the channel
program. The fact that the individual IDAWs within the IDAL are
invalid is fine, since they aren't actually checked in these cases.
Set pa_nr to zero when skipping the pfn_array_pin() call, since it is
defined as the number of pages pinned and is used to determine
whether to call vfio_unpin_pages() upon cleanup.
The pfn_array_pin() routine returns the number of pages that were
pinned, but now might be skipped for some CCWs. Thus we need to
calculate the expected number of pages ourselves such that we are
guaranteed to allocate a reasonable number of IDAWs, which will
provide a valid address in CCW.CDA regardless of whether the IDAWs
are filled in with pinned/translated addresses or not.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-2-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's initialize the host address to something that is invalid,
rather than letting it default to zero. This just makes it easier
to notice when a pin operation has failed or been skipped.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-5-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The pfn_array_alloc_pin routine is doing too much. Today, it does the
alloc of the pfn_array struct and its member arrays, builds the iova
address lists out of a contiguous piece of guest memory, and asks vfio
to pin the resulting pages.
Let's effectively revert a significant portion of commit 5c1cfb1c39
("vfio: ccw: refactor and improve pfn_array_alloc_pin()") such that we
break pfn_array_alloc_pin() into its component pieces, and have one
routine that allocates/populates the pfn_array structs, and another
that actually pins the memory. In the future, we will be able to
handle scenarios where pinning memory isn't actually appropriate.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-4-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Otherwise, the guest can believe it's okay to start another I/O
and bump into the non-idle state. This results in a cc=2 (with
the asynchronous CSCH/HSCH code) returned to the guest, which is
unfortunate since everything is otherwise working normally.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20190514234248.36203-3-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Per the POPs [1], when processing an interrupt the SCSW.CPA field of an
IRB generally points to 8 bytes after the last CCW that was executed
(there are exceptions, but this is the most common behavior).
In the case of an error, this points us to the first un-executed CCW
in the chain. But in the case of normal I/O, the address points beyond
the end of the chain. While the guest generally only cares about this
when possibly restarting a channel program after error recovery, we
should convert the address even in the good scenario so that we provide
a consistent, valid, response upon I/O completion.
[1] Figure 16-6 in SA22-7832-11. The footnotes in that table also state
that this is true even if the resulting address is invalid or protected,
but moving to the end of the guest chain should not be a surprise.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-2-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Six minor fixes to device drivers and one to the multipath alua
handler. The most extensive fix is the zfcp port remove prevention
one, but it's impact is only s390.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXPJlASYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSElAP9A/qo+
mLomrWOPMGqkQKOX7Mp3sP5lMllbvPndrR+9KQD/eDzFp3HCyUO2OFd6aR7/X90H
IZ+cd/wJCSHenKMJOX8=
=NFnR
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six minor fixes to device drivers and one to the multipath alua
handler.
The most extensive fix is the zfcp port remove prevention one, but
it's impact is only s390"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libsas: delete sas port if expander discover failed
scsi: libsas: only clear phy->in_shutdown after shutdown event done
scsi: scsi_dh_alua: Fix possible null-ptr-deref
scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask
scsi: zfcp: fix to prevent port_remove with pure auto scan LUNs (only sdevs)
scsi: zfcp: fix missing zfcp_port reference put on -EBUSY from port_remove
scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route()
- Farewell Martin Schwidefsky: add Martin to CREDITS and remove him
from MAINTAINERS
- Vasily Gorbik and Christian Borntraeger join as maintainers for s390
- Fix locking bug in ctr(aes) and ctr(des) s390 specific ciphers
- A rather large patch which fixes gcm-aes-s390 scatter gather handling
- Fix zcrypt wrong dispatching for control domain CPRBs
- Fix assignment of bus resources in PCI code
- Fix structure definition for set PCI function
- Fix one compile error and one compile warning seen when
CONFIG_OPTIMIZE_INLINING is enabled
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=e7cv
-----END PGP SIGNATURE-----
Merge tag 's390-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Farewell Martin Schwidefsky: add Martin to CREDITS and remove him
from MAINTAINERS
- Vasily Gorbik and Christian Borntraeger join as maintainers for s390
- Fix locking bug in ctr(aes) and ctr(des) s390 specific ciphers
- A rather large patch which fixes gcm-aes-s390 scatter gather handling
- Fix zcrypt wrong dispatching for control domain CPRBs
- Fix assignment of bus resources in PCI code
- Fix structure definition for set PCI function
- Fix one compile error and one compile warning seen when
CONFIG_OPTIMIZE_INLINING is enabled
* tag 's390-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: add Vasily Gorbik and Christian Borntraeger for s390
MAINTAINERS: Farewell Martin Schwidefsky
s390/crypto: fix possible sleep during spinlock aquired
s390/crypto: fix gcm-aes-s390 selftest failures
s390/zcrypt: Fix wrong dispatching for control domain CPRBs
s390/pci: fix assignment of bus resources
s390/pci: fix struct definition for set PCI function
s390: mark __cpacf_check_opcode() and cpacf_query_func() as __always_inline
s390: add unreachable() to dump_fault_info() to fix -Wmaybe-uninitialized
When the user tries to remove a zfcp port via sysfs, we only rejected it if
there are zfcp unit children under the port. With purely automatically
scanned LUNs there are no zfcp units but only SCSI devices. In such cases,
the port_remove erroneously continued. We close the port and this
implicitly closes all LUNs under the port. The SCSI devices survive with
their private zfcp_scsi_dev still holding a reference to the "removed"
zfcp_port (still allocated but invisible in sysfs) [zfcp_get_port_by_wwpn
in zfcp_scsi_slave_alloc]. This is not a problem as long as the fc_rport
stays blocked. Once (auto) port scan brings back the removed port, we
unblock its fc_rport again by design. However, there is no mechanism that
would recover (open) the LUNs under the port (no "ersfs_3" without
zfcp_unit [zfcp_erp_strategy_followup_success]). Any pending or new I/O to
such LUN leads to repeated:
Done: NEEDS_RETRY Result: hostbyte=DID_IMM_RETRY driverbyte=DRIVER_OK
See also v4.10 commit 6f2ce1c6af ("scsi: zfcp: fix rport unblock race
with LUN recovery"). Even a manual LUN recovery
(echo 0 > /sys/bus/scsi/devices/H:C:T:L/zfcp_failed)
does not help, as the LUN links to the old "removed" port which remains
to lack ZFCP_STATUS_COMMON_RUNNING [zfcp_erp_required_act].
The only workaround is to first ensure that the fc_rport is blocked
(e.g. port_remove again in case it was re-discovered by (auto) port scan),
then delete the SCSI devices, and finally re-discover by (auto) port scan.
The port scan includes an fc_rport unblock, which in turn triggers
a new scan on the scsi target to freshly get new pure auto scan LUNs.
Fix this by rejecting port_remove also if there are SCSI devices
(even without any zfcp_unit) under this port. Re-use mechanics from v3.7
commit d99b601b63 ("[SCSI] zfcp: restore refcount check on port_remove").
However, we have to give up zfcp_sysfs_port_units_mutex earlier in unit_add
to prevent a deadlock with scsi_host scan taking shost->scan_mutex first
and then zfcp_sysfs_port_units_mutex now in our zfcp_scsi_slave_alloc().
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes: b62a8d9b45 ("[SCSI] zfcp: Use SCSI device data zfcp scsi dev instead of zfcp unit")
Fixes: f8210e3488 ("[SCSI] zfcp: Allow midlayer to scan for LUNs when running in NPIV mode")
Cc: <stable@vger.kernel.org> #2.6.37+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With this early return due to zfcp_unit child(ren), we don't use the
zfcp_port reference from the earlier zfcp_get_port_by_wwpn() anymore and
need to put it.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes: d99b601b63 ("[SCSI] zfcp: restore refcount check on port_remove")
Cc: <stable@vger.kernel.org> #3.7+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The zcrypt device driver does not handle CPRBs which address
a control domain correctly. This fix introduces a workaround:
The domain field of the request CPRB is checked if there is
a valid domain value in there. If this is true and the value
is a control only domain (a domain which is enabled in the
crypto config ADM mask but disabled in the AQM mask) the
CPRB is forwarded to the default usage domain. If there is
no default domain, the request is rejected with an ENODEV.
This fix is important for maintaining crypto adapters. For
example one LPAR can use a crypto adapter domain ('Control
and Usage') but another LPAR needs to be able to maintain
this adapter domain ('Control'). Scenarios like this did
not work properly and the patch enables this.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Pankaj reports that starting with commit ad428cdb52 "dax: Check the
end of the block-device capacity with dax_direct_access()" device-mapper
no longer allows dax operation. This results from the stricter checks in
__bdev_dax_supported() that validate that the start and end of a
block-device map to the same 'pagemap' instance.
Teach the dax-core and device-mapper to validate the 'pagemap' on a
per-target basis. This is accomplished by refactoring the
bdev_dax_supported() internals into generic_fsdax_supported() which
takes a sector range to validate. Consequently generic_fsdax_supported()
is suitable to be used in a device-mapper ->iterate_devices() callback.
A new ->dax_supported() operation is added to allow composite devices to
split and route upper-level bdev_dax_supported() requests.
Fixes: ad428cdb52 ("dax: Check the end of the block-device...")
Cc: <stable@vger.kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Tested-by: Pankaj Gupta <pagupta@redhat.com>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
- Enhancements for the QDIO layer
- Remove the RCP trace event
- Avoid three build issues
- Move the defconfig to the configs directory
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJc3lk4AAoJEDjwexyKj9rgPXQH/06jspiNAiz2aZBvAxcfUku+
b1yDNg2EivWYSbUtTPqvI3H5skANvc3N4Dnv6mYUcO/lpIWo6MdXW9lepxEP1yNb
AdvVY/c1yMZjMdi2WYrhC8+mLtoFmgjIPSIBcmSsZ2j+5IwI0bB5UcOjzKlujhAY
E1QGdlVB5hxCI7RZnCGdggqkjAPsVKYNl1zVgX2GO8UwprZbt1IzuWK4NgdmE/bh
8SV1AGOjp/BGXNY+uj06b7DI5K19wwlv9yPdO+cv22HPqLvEvZU9xyIjBYTQy+/0
LmtcZ91DLS7fWM45XE/2T1UPUDTophGsI1jVBLGlTOBYjYSMD2ijYN8MJd0+IlY=
=/28O
-----END PGP SIGNATURE-----
Merge tag 's390-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Martin Schwidefsky:
- Enhancements for the QDIO layer
- Remove the RCP trace event
- Avoid three build issues
- Move the defconfig to the configs directory
* tag 's390-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: move arch/s390/defconfig to arch/s390/configs/defconfig
s390/qdio: optimize state inspection of HW-owned SBALs
s390/qdio: use get_buf_state() in debug_get_buf_state()
s390/qdio: allow to scan all Output SBALs in one go
s390/cio: Remove tracing for rchp instruction
s390/kasan: adapt disabled_wait usage to avoid build error
latent_entropy: avoid build error when plugin cflags are not set
s390/boot: fix compiler error due to missing awk strtonum
-----BEGIN PGP SIGNATURE-----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=ZKv1
-----END PGP SIGNATURE-----
Merge tag 'for-5.2/block-post-20190516' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"This is mainly some late lightnvm changes that came in just before the
merge window, as well as fixes that have been queued up since the
initial pull request was frozen.
This contains:
- lightnvm changes, fixing race conditions, improving memory
utilization, and improving pblk compatability (Chansol, Igor,
Marcin)
- NVMe pull request with minor fixes all over the map (via Christoph)
- remove redundant error print in sata_rcar (Geert)
- struct_size() cleanup (Jackie)
- dasd CONFIG_LBADF warning fix (Ming)
- brd cond_resched() improvement (Mikulas)"
* tag 'for-5.2/block-post-20190516' of git://git.kernel.dk/linux-block: (41 commits)
block/bio-integrity: use struct_size() in kmalloc()
nvme: validate cntlid during controller initialisation
nvme: change locking for the per-subsystem controller list
nvme: trace all async notice events
nvme: fix typos in nvme status code values
nvme-fabrics: remove unused argument
nvme-multipath: avoid crash on invalid subsystem cntlid enumeration
nvme-fc: use separate work queue to avoid warning
nvme-rdma: remove redundant reference between ib_device and tagset
nvme-pci: mark expected switch fall-through
nvme-pci: add known admin effects to augument admin effects log page
nvme-pci: init shadow doorbell after each reset
brd: add cond_resched to brd_free_pages
sata_rcar: Remove ata_host_alloc() error printing
s390/dasd: fix build warning in dasd_eckd_build_cp_raw
lightnvm: pblk: use nvm_rq_to_ppa_list()
lightnvm: pblk: simplify partial read path
lightnvm: do not remove instance under global lock
lightnvm: track inflight target creations
lightnvm: pblk: recover only written metadata
...
s390 has packed ring support.
several fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJc2y5qAAoJECgfDbjSjVRpfqUIAJfKKzwNm3YQ8zAQuI1dR5FN
xCTO13R+20rFPiDYCmhJVc+zodHlzbdvu+DqqithNJ7ZnwovDkY3YTq6hm8pVtLW
vpVuXVHap1nE8Hztw9/kTDrr4iKs1rV/tlMs57dSvdOBnovoT8VqhQ0qemLY/lI8
CIhOrykO/BYmv2tC4cRUMR5QBpOrm1NyotkWqCrL7Y+3WW21pB0kJp01umLzeGjb
9zhab1VaMxH6m1wQPoYumzduTRdaNJBzHJYnLh7KR+6DTNEgjhn7Kz6ijQbyDOmv
+X+7pe7M8yJMelc/CEjyqbdt0JxEZ6tpgfGvtfzL2BMkAs9Byqonc4mRd/j3Unk=
=StAI
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- enable packed ring support for s390
- several fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio/s390: enable packed ring
virtio/s390: DMA support for virtio-ccw
virtio/s390: use vring_create_virtqueue
virtio/virtio_ring: do some comment fixes
vhost-scsi: remove incorrect memory barrier
tools/virtio/ringtest: Remove bogus definition of BUG_ON()
virtio_ring: Fix potential mem leak in virtqueue_add_indirect_packed
Nothing precludes to accepting VIRTIO_F_RING_PACKED any more.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Currently virtio-ccw devices do not work if the device has
VIRTIO_F_IOMMU_PLATFORM. In future we do want to support DMA API with
virtio-ccw.
Let us do the plumbing, so the feature VIRTIO_F_IOMMU_PLATFORM works
with virtio-ccw.
Let us also switch from legacy avail/used accessors to the DMA aware
ones (even if it isn't strictly necessary), and remove the legacy
accessors (we were the last users).
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The commit 2a2d1382fe ("virtio: Add improved queue allocation API")
establishes a new way of allocating virtqueues (as a part of the effort
that taught DMA to virtio rings).
In the future we will want virtio-ccw to use the DMA API as well.
Let us switch from the legacy method of allocating virtqueues to
vring_create_virtqueue() as the first step into that direction.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
When get_buf_states() gets called with count > 1, it scans the
corresponding number of SBAL states until it encounters a mismatch.
But when these SBALs are in a HW-owned state, the callers don't actually
care _how many_ such SBALs are on the queue. If we can't process the
first SBAL, we can't process any of the following SBALs either. So when
the first SBAL is HW-owned, skip the scan of the remaining SBALs and
thus save some CPU time.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
For a 1-SBAL state inspection, use the corresponding helper.
No functional change, just reducing the number of immediate callers to
get_buf_states().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Old code restricted the number of inspected SBALs to
QDIO_MAX_BUFFERS_PER_Q - 1, as otherwise the first_to_check and
first_to_kick cursors could overlap. Subsequent code would then assume that
there was no progress on the queue, when in fact _all_ SBALs on the queue
were ready-to-process.
This limitation no longer applies, so allow the queue-scan code to inspect
all SBALs on the queue. Note that qeth requires an additional patch
("s390/qeth: stop/wake TX queues based on their fill level"), to avoid
potential queue stalls when all 128 SBALs are reported as ready-to-process.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
