During work on perf report for s390 I ran into the following issue:
0 0x318 [0x78]: PERF_RECORD_MMAP -1/0:
[0x3ff804d6990(0xfffffc007fb2966f) @ 0]:
x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko
This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid
module size for qeth_l2.ko (the s390 ethernet device driver).
Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory.
It turned out that this wrong size is created by the perf record
command. What happens is this function call sequence from
__cmd_record():
perf_session__new():
perf_session__create_kernel_maps():
machine__create_kernel_maps():
machine__create_modules(): Creates map for all loaded kernel modules.
modules__parse(): Reads /proc/modules and extracts module name and
load address (1st and last column)
machine__create_module(): Called for every module found in /proc/modules.
Creates a new map for every module found and enters
module name and start address into the map. Since the
module end address is unknown it is set to zero.
This ends up with a kernel module map list sorted by module start
addresses. All module end addresses are zero.
Last machine__create_kernel_maps() calls function map_groups__fixup_end().
This function iterates through the maps and assigns each map entry's
end address the successor map entry start address. The last entry of the
map group has no successor, so ~0 is used as end to consume the remaining
memory.
Later __cmd_record calls function record__synthesize() which in turn calls
perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules()
to create PERF_REPORT_MMAP entries into the perf.data file.
On s390 this results in the last module qeth_l2.ko
(which has highest start address, see module table:
[root@s8360047 perf]# cat /proc/modules
qeth_l2 86016 1 - Live 0x000003ff804d6000
qeth 266240 1 qeth_l2, Live 0x000003ff80296000
ccwgroup 24576 1 qeth, Live 0x000003ff80218000
vmur 36864 0 - Live 0x000003ff80182000
qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000
[root@s8360047 perf]# )
to be the last entry and its map has an end address of ~0.
When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko
its start address and length is written. The length is calculated in line:
event->mmap.len = pos->end - pos->start;
and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f
(*) On s390 the module start address is actually determined by a __weak function
named arch__fix_module_text_start() in machine__create_module().
I think this improvable. We can use the module size (2nd column of /proc/modules)
to get each loaded kernel module size and calculate its end address.
Only for map entries which do not have a valid end address (end is still zero)
we can use the heuristic we have now, that is use successor start address or ~0.
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes we get a non-null, but empty, string for the filename from
bfd. This then results in srclines of the form ":0", which is different
from the canonical SRCLINE_UNKNOWN in the form "??:0". Set the file to
NULL if it is empty to fix this.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170806212446.24925-14-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The input string is not modified and thus can be passed in as a pointer
to const data.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170806212446.24925-3-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Uses the 'perf test shell' library to add probe:vfs_getname to the
system then use it with 'perf trace' using 'touch' to write to a temp
file, then checks that that was captured by the vfs_getname was used by
'perf trace', that already handles "probe:vfs_getname" if present, and
used in the "open" syscall "filename" argument beautifier.
Testing it:
# perf test "trace + vfs_getname"
61: Check open filename arg using perf trace + vfs_getname: Ok
#
# perf test -v "trace + vfs_getname"
61: Check open filename arg using perf trace + vfs_getname:
--- start ---
test child forked, pid 30846
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
2.237 ( 0.012 ms): touch/30855 open(filename: /tmp/temporary_file.kmoWQ, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
test child finished with 0
---- end ----
Check open filename arg using perf trace + vfs_getname: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j02nobfvvn9c7yrphdsnbqx0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test uses the 'perf test shell' library to add probe:vfs_getname to the
system then use it with 'perf record' using 'touch' to write to a temp file,
then checks that that was captured by the vfs_getname probe in the generated
perf.data file, with the temp file name as the pathname argument.
Using it:
# perf test "Use vfs_getname"
60: Use vfs_getname probe to get syscall args filenames: Ok
# perf test -v "Use vfs_getname"
60: Use vfs_getname probe to get syscall args filenames:
--- start ---
test child forked, pid 16414
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
Recording open file:
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.022 MB /tmp/vaca.perf.data.QZsn7 (13 samples) ]
Looking at perf.data file for vfs_getname records for the file we touched:
touch 16421 [002] 1255152.879561: probe:vfs_getname: (ffffffffa626e608) pathname="/tmp/vaca.l10SL"
test child finished with 0
---- end ----
Use vfs_getname probe to get syscall args filenames: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-t555fnhbcbxnukltk23dqxur@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Multiple tests will be able to reuse these functions, to test things
like perf report, 'trace', etc, using this probe.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-48xagvozhouhyi8fjota6o2d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we have shell tests, install them.
Developers don't need this pass, as 'perf test' will look first at the
in tree scripts at tools/perf/tests/shell/.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j21u4v0jsehi0lpwqwjb4j45@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
First perf shell test:
# perf test vfs_getname
60: Add vfs_getname probe to get syscall args filenames: Ok
#
In verbose mode:
# perf test -v vfs_getname
60: Add vfs_getname probe to get syscall args filenames:
--- start ---
test child forked, pid 19146
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
test child finished with 0
---- end ----
Add vfs_getname probe to get syscall args filenames: Ok
#
And if the vmlinux file is not found:
# mv ../build/v4.12.0-rc6+/vmlinux ../build/v4.12.0-rc6+/vmlinux.hidden
# perf test vfs_getname
60: Add vfs_getname probe to get syscall args filenames: Skip
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8f3n22c1yn516ev30s603ow2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
# perf test Synth
39: Synthesize thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
# perf test list Synth
#
After:
# perf test Synth
39: Synthesize thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
# perf test list Synth
39: Synthesize thread map
41: Synthesize cpu map
42: Synthesize stat config
43: Synthesize stat
44: Synthesize stat round
45: Synthesize attr update
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-v95tqqzuwawsmds3zn2mosje@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow testing by directly using perf tools in scripts, checking that
the effects on the system are the ones expected and that the output
produced is as well the desired one.
For instance, adding a probe at a well known location with 'perf probe',
then checking that the results from using that probe to record are the
desired ones, etc.
The next csets will introduce tests using this new testing
infrastructure.
The scripts should return 0 for Ok, 1 for FAIL and 2 for SKIP.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-swbpn7amrjqffh83lsr39s9p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The stack size should be 16 bytes aligned in arm64 system. The similar
patch has been merged already.
> <commit id: 1f78dda2cf5e4eeb00aee2a01c9515e2e704b4c0>
> selftests: memfd_test: Revised STACK_SIZE to make it 16-byte aligned
>
> There is a mandate of 16-byte aligned stack on AArch64 [1], so the
> STACK_SIZE here should also be 16-byte aligned, otherwise we would
> get an error when calling clone().
>
> [1] http://lxr.free-electrons.com/source/arch/arm64/kernel/process.c#L265
>
> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Orson Zhai <orson.zhai@linaro.org>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Fix compile error due to ksft_exit_skip() update to take var_args.
freq-step.c: In function ‘init_test’:
freq-step.c:234:3: error: too few arguments to function ‘ksft_exit_skip’
ksft_exit_skip();
^~~~~~~~~~~~~~
In file included from freq-step.c:26:0:
../kselftest.h:167:19: note: declared here
static inline int ksft_exit_skip(const char *msg, ...)
^~~~~~~~~~~~~~
<builtin>: recipe for target 'freq-step' failed
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This way we'll be able to pass more test specific parameters without
having to change this function signature.
Will be used by the upcoming 'shell tests', shell scripts that will
call perf tools and check if they work as expected, comparing its
effects on the system (think 'perf probe foo') the output produced, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wq250w7j1opbzyiynozuajbl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
# perf test Synth
39: Synthesize thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
#
# perf test list Synth
1: Synthesize thread map
2: Synthesize cpu map
3: Synthesize stat config
4: Synthesize stat
5: Synthesize stat round
6: Synthesize attr update
#
After:
# perf test Synth
39: Synthesize thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
#
# perf test list Synth
39: Synthesize thread map
41: Synthesize cpu map
42: Synthesize stat config
43: Synthesize stat
44: Synthesize stat round
45: Synthesize attr update
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pjhuhkphs7o3tkbqrukfv6bz@git.kernel.org
Fixes: e8210cefb7 ("perf tests: Introduce iterator function for tests")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The stat shadow saved values rbtree is indexed by a pointer. Fix the
comparison function:
- We cannot return a pointer delta as an int because that loses bits on
64bit.
- Doing pointer arithmetic on the struct pointer only works if the
objects are spaced by the multiple of the object size, which is not
guaranteed for individual malloc'ed object
Replace it with a proper comparison.
This fixes various problems with values not being found.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170724234015.5165-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Drop the .json suffix for events directory in the mapfile.csv.
Now that we have separate JSON files for each topic in a CPU (eg: see
tools/perf/pmu-events/arch/powerpc/power8/*.json) the .json suffix in
the mapfile is misleading and redundant.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20170802174617.GA32545@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When GCC realigns a function's stack, it sometimes uses %r13 as the DRAP
register, like:
push %r13
lea 0x10(%rsp), %r13
and $0xfffffffffffffff0, %rsp
pushq -0x8(%r13)
push %rbp
mov %rsp, %rbp
push %r13
...
mov -0x8(%rbp),%r13
leaveq
lea -0x10(%r13), %rsp
pop %r13
retq
Since %r13 was pushed onto the stack twice, its two stack locations need
to be stored separately. The first push of %r13 is its original value,
and the second push of %r13 is the caller's stack frame address.
Since %r13 is a callee-saved register, we need to track the stack
location of its original value separately from the DRAP register.
This fixes the following false positive warning:
lib/ubsan.o: warning: objtool: val_to_string.constprop.7()+0x97: leave instruction with modified stack frame
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: baa41469a7 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/3da23a6d4c5b3c1e21fc2ccc21a73941b97ff20a.1502401017.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The validate_branch() function should never return a negative value.
Errors are treated as warnings so that even if something goes wrong,
objtool does its best to generate ORC data for the rest of the file.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: baa41469a7 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/d86671cfde823b50477cd2f6f548dfe54871e24d.1502401017.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The firmware API has a feature to enable batching requests for the same fil
e under one worker, so only one lookup is done. This only triggers if we so
happen to schedule two lookups for same file around the same time, or if
release_firmware() has not been called for a successful firmware call. This
can happen for instance if you happen to have multiple devices and one
device driver for certain drivers where the stars line up scheduling
wise.
This adds a new sync and async test trigger. Instead of adding a new
trigger for each new test type we make the tests a bit configurable so that
we could configure the tests in userspace and just kick a test through a
few basic triggers. With this, for instance the two types of sync requests:
o request_firmware() and
o request_firmware_direct()
can be modified with a knob. Likewise the two type of async requests:
o request_firmware_nowait(uevent=true) and
o request_firmware_nowait(uevent=false)
can be configured with another knob. The call request_firmware_into_buf()
has no users... yet.
The old tests are left in place as-is given they serve a few other purposes
which we are currently not interested in also testing yet. This will change
later as we will be able to just consolidate all tests under a few basic
triggers with just one general configuration setup.
We perform two types of tests, one for where the file is present and one
for where the file is not present. All test tests go tested and they now
pass for the following 3 kernel builds possible for the firmware API:
0. Most distro setup:
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=y
1. Android:
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_USER_HELPER=y
2. Rare build:
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=n
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It has been reported that SIGCHLD will trigger an immediate abort
on sync firmware requests which rely on the sysfs interface for a
trigger. This is unexpected behaviour, this reproduces this issue.
This test case currenty fails.
Reported-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
add a simple script to exercise some rtnetlink call paths, so KASAN,
lockdep etc. can yell at developer before patches are sent upstream.
This can be extended to also cover bond, team, vrf and the like.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Those are funny cases. Make sure they work.
(Something is screwy with signal handling if a selector is 1, 2, or 3.
Anyone who wants to dive into that rabbit hole is welcome to do so.)
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang Seok <chang.seok.bae@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
User visible:
- Beautifiers for the 'cmd' arg of several ioctl types, including:
sound, DRM, KVM, vhost virtio and perf_events.
This was done by using scripts that extract the information from
the UAPI headers, generating string tables that are then used in
the 'perf trace' syscall argument ioctl beautifier.
More work needed to further use it, for instance, to use the
_IOC_DIR value where it is used sanely to suppress the third
argument, to set formatters for non-pointer values and ultimately
for using eBPF + pahole-like code to collect + beautify structs in
the third arg.
Using the current scheme of having tools/ copies of kernel headers
we'll make sure tooling stays working when changes are made to the
kernel ABI headers and will be notified when they get changed,
reducing the time for 'perf trace' to support new ABIs and allowing
the tools/perf/ codebase to have the definitions it needs to
build in dozens of distros/versions, as routinely tested using
containers for, at this time, 47 environments. (Arnaldo Carvalho de Melo)
Infrastructure
- Clarify header version warning message (Ingo Molnar)
- Sync kernel ABI headers with tooling headers (Ingo Molnar, Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=C6F5
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.14-20170801' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements from Arnaldo Carvalho de Melo:
User visible changes:
- Beautifiers for the 'cmd' arg of several ioctl types, including:
sound, DRM, KVM, vhost virtio and perf_events.
This was done by using scripts that extract the information from
the UAPI headers, generating string tables that are then used in
the 'perf trace' syscall argument ioctl beautifier.
More work needed to further use it, for instance, to use the
_IOC_DIR value where it is used sanely to suppress the third
argument, to set formatters for non-pointer values and ultimately
for using eBPF + pahole-like code to collect + beautify structs in
the third arg.
Using the current scheme of having tools/ copies of kernel headers
we'll make sure tooling stays working when changes are made to the
kernel ABI headers and will be notified when they get changed,
reducing the time for 'perf trace' to support new ABIs and allowing
the tools/perf/ codebase to have the definitions it needs to
build in dozens of distros/versions, as routinely tested using
containers for, at this time, 47 environments. (Arnaldo Carvalho de Melo)
Infrastructure changes:
- Clarify header version warning message (Ingo Molnar)
- Sync kernel ABI headers with tooling headers (Ingo Molnar, Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add test cases to the verifier selftest suite in order to verify that
i) direct packet access, and ii) dynamic map value access is working
with the changes related to the new instructions.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=),
BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that
particularly *JLT/*JLE counterparts involving immediates need
to be rewritten from e.g. X < [IMM] by swapping arguments into
[IMM] > X, meaning the immediate first is required to be loaded
into a register Y := [IMM], such that then we can compare with
Y > X. Note that the destination operand is always required to
be a register.
This has the downside of having unnecessarily increased register
pressure, meaning complex program would need to spill other
registers temporarily to stack in order to obtain an unused
register for the [IMM]. Loading to registers will thus also
affect state pruning since we need to account for that register
use and potentially those registers that had to be spilled/filled
again. As a consequence slightly more stack space might have
been used due to spilling, and BPF programs are a bit longer
due to extra code involving the register load and potentially
required spill/fills.
Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=)
counterparts to the eBPF instruction set. Modifying LLVM to
remove the NegateCC() workaround in a PoC patch at [1] and
allowing it to also emit the new instructions resulted in
cilium's BPF programs that are injected into the fast-path to
have a reduced program length in the range of 2-3% (e.g.
accumulated main and tail call sections from one of the object
file reduced from 4864 to 4729 insns), reduced complexity in
the range of 10-30% (e.g. accumulated sections reduced in one
of the cases from 116432 to 88428 insns), and reduced stack
usage in the range of 1-5% (e.g. accumulated sections from one
of the object files reduced from 824 to 784b).
The modification for LLVM will be incorporated in a backwards
compatible way. Plan is for LLVM to have i) a target specific
option to offer a possibility to explicitly enable the extension
by the user (as we have with -m target specific extensions today
for various CPU insns), and ii) have the kernel checked for
presence of the extensions and enable them transparently when
the user is selecting more aggressive options such as -march=native
in a bpf target context. (Other frontends generating BPF byte
code, e.g. ply can probe the kernel directly for its code
generation.)
[1] https://github.com/borkmann/llvm/tree/bpf-insns
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The UDP offload conflict is dealt with by simply taking what is
in net-next where we have removed all of the UFO handling code
entirely.
The TCP conflict was a case of local variables in a function
being removed from both net and net-next.
In netvsc we had an assignment right next to where a missing
set of u64 stats sync object inits were added.
Signed-off-by: David S. Miller <davem@davemloft.net>
Executing selftests is fragile as if someone forgot to set a secript
as executable the test will fail, and you won't know for sure if the
failure was caused by the lack of proper permissions or something else.
Setting scripts as executable is required, this also enable folks to
execute selftests as independent units.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Some tests track errors in addition to test failures. Add ksft_error
counter, ksft_get_error_cnt(), and ksft_test_result_error() API to
get the counter value and print error message.
Update ksft_print_cnts(), and ksft_test_num() to include error counter.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
make -C tools/testing/selftests/futex/ run_tests doesn't run the futex
tests.
Running the tests when `dirname $(OUTPUT)` == $(PWD) doesn't work when
the $(OUTPUT) is $(PWD) which is the case when the test is run using
make -C tools/testing/selftests/futex/ run_tests.
Fixes: a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Allow user to call install target.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is a nice buildsystem dedicated for userspace tools in Linux kernel tree.
Switch iio target to be built by it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add test for xdp_redirect by creating two namespaces with two
veth peers, then forward packets in-between.
Signed-off-by: William Tu <u9012063@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable ctx accesses and stack accesses aren't allowed, because we can't
determine what type of value will be read.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A number of selftests fell foul of the changed MAX_PACKET_OFF handling.
For instance, "direct packet access: test2" was potentially reading four
bytes from pkt + 0xffff, which could take it past the verifier's limit,
causing the program to be rejected (checks against pkt_end didn't give
us any reg->range).
Increase the shifts by one so that R2 is now mask 0x7fff instead of
mask 0xffff.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tests non-add/sub operations (AND, LSH) on pointers decaying them to
unknown scalars.
Also tests that a pkt_ptr add which could potentially overflow is rejected
(find_good_pkt_pointers ignores it and doesn't give us any reg->range).
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New test adds 14 to the unknown value before adding to the packet pointer,
meaning there's no 'fixed offset' field and instead we add into the
var_off, yielding a '4n+2' value.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expectations have changed, as has the format of the logged state.
To make the tests easier to read, add a line-matching framework so that
each match need only quote the register it cares about. (Multiple
matches may refer to the same line, but matches must be listed in
order of increasing line.)
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some of the verifier's error messages have changed, and some constructs
that previously couldn't be verified are now accepted.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We had just forogtten to do this. Without this the following test fails:
$ sudo make -C tools/testing/selftests/sysctl/ run_tests
make: Entering directory '/home/mcgrof/linux-next/tools/testing/selftests/sysctl'
/bin/sh: ./sysctl.sh: Permission denied
selftests: sysctl.sh [FAIL]
/home/mcgrof/linux-next/tools/testing/selftests/sysctl
make: Leaving directory '/home/mcgrof/linux-next/tools/testing/selftests/sysctl'
Fixes: 64b671204a ("test_sysctl: add generic script to expand on tests")
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
We had just forgotten to do this. Without this if we run the
following we get a permission denied:
sudo make -C tools/testing/selftests/kmod/ run_tests
make: Entering directory '/home/mcgrof/linux-next/tools/testing/selftests/kmod'
/bin/sh: ./kmod.sh: Permission denied
selftests: kmod.sh [FAIL]
/home/mcgrof/linux-next/tools/testing/selftests/kmod
make: Leaving directory '/home/mcgrof/linux-next/tools/testing/selftests/kmod
Fixes: 39258f448d71 ("kmod: add test driver to stress test the module loader")
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Commit 18f3d6be6b ("selftests/bpf: Add test cases to test narrower ctx field loads")
introduced new eBPF test cases. One of them (test_pkt_md_access.c)
fails on s390x. The BPF verifier error message is:
[root@s8360046 bpf]# ./test_progs
test_pkt_access:PASS:ipv4 349 nsec
test_pkt_access:PASS:ipv6 212 nsec
[....]
libbpf: load bpf program failed: Permission denied
libbpf: -- BEGIN DUMP LOG ---
libbpf:
0: (71) r2 = *(u8 *)(r1 +0)
invalid bpf_context access off=0 size=1
libbpf: -- END LOG --
libbpf: failed to load program 'test1'
libbpf: failed to load object './test_pkt_md_access.o'
Summary: 29 PASSED, 1 FAILED
[root@s8360046 bpf]#
This is caused by a byte endianness issue. S390x is a big endian
architecture. Pointer access to the lowest byte or halfword of a
four byte value need to add an offset.
On little endian architectures this offset is not needed.
Fix this and use the same approach as the originator used for other files
(for example test_verifier.c) in his original commit.
With this fix the test program test_progs succeeds on s390x:
[root@s8360046 bpf]# ./test_progs
test_pkt_access:PASS:ipv4 236 nsec
test_pkt_access:PASS:ipv6 217 nsec
test_xdp:PASS:ipv4 3624 nsec
test_xdp:PASS:ipv6 1722 nsec
test_l4lb:PASS:ipv4 926 nsec
test_l4lb:PASS:ipv6 1322 nsec
test_tcp_estats:PASS: 0 nsec
test_bpf_obj_id:PASS:get-fd-by-notexist-prog-id 0 nsec
test_bpf_obj_id:PASS:get-fd-by-notexist-map-id 0 nsec
test_bpf_obj_id:PASS:get-prog-info(fd) 0 nsec
test_bpf_obj_id:PASS:get-map-info(fd) 0 nsec
test_bpf_obj_id:PASS:get-prog-info(fd) 0 nsec
test_bpf_obj_id:PASS:get-map-info(fd) 0 nsec
test_bpf_obj_id:PASS:get-prog-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:get-prog-info(next_id->fd) 0 nsec
test_bpf_obj_id:PASS:get-prog-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:get-prog-info(next_id->fd) 0 nsec
test_bpf_obj_id:PASS:check total prog id found by get_next_id 0 nsec
test_bpf_obj_id:PASS:get-map-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:get-map-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:get-map-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:get-map-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:get-map-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:get-map-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:get-map-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:check get-map-info(next_id->fd) 0 nsec
test_bpf_obj_id:PASS:get-map-fd(next_id) 0 nsec
test_bpf_obj_id:PASS:check get-map-info(next_id->fd) 0 nsec
test_bpf_obj_id:PASS:check total map id found by get_next_id 0 nsec
test_pkt_md_access:PASS: 277 nsec
Summary: 30 PASSED, 0 FAILED
[root@s8360046 bpf]#
Fixes: 18f3d6be6b ("selftests/bpf: Add test cases to test narrower ctx field loads")
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We really must check with #if __BYTE_ORDER == XYZ instead of
just presence of #ifdef __LITTLE_ENDIAN. I noticed that when
actually running this on big endian machine, the latter test
resolves to true for user space, same for #ifdef __BIG_ENDIAN.
E.g., looking at endian.h from libc, both are also defined
there, so we really must test this against __BYTE_ORDER instead
for proper insns selection. For the kernel, such checks are
fine though e.g. see 13da9e200f ("Revert "endian: #define
__BYTE_ORDER"") and 415586c9e6 ("UAPI: fix endianness conditionals
in M32R's asm/stat.h") for some more context, but not for
user space. Lets also make sure to properly include endian.h.
After that, suite passes for me:
./test_verifier: ELF 64-bit MSB executable, [...]
Linux foo 4.13.0-rc3+ #4 SMP Fri Aug 4 06:59:30 EDT 2017 s390x s390x s390x GNU/Linux
Before fix: Summary: 505 PASSED, 11 FAILED
After fix: Summary: 516 PASSED, 0 FAILED
Fixes: 18f3d6be6b ("selftests/bpf: Add test cases to test narrower ctx field loads")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BPF feature test as well as libbpf is missing the __NR_bpf
define for s390 and currently refuses to compile (selftest suite
depends on libbpf as well). Similar issue was fixed some time
ago via b0c47807d3 ("bpf: Add sparc support to tools and
samples."), just do the same and add definitions.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce regression test for msg_zerocopy feature. Send traffic from
one process to another with and without zerocopy.
Evaluate tcp, udp, raw and packet sockets, including variants
- udp: corking and corking with mixed copy/zerocopy calls
- raw: with and without hdrincl
- packet: at both raw and dgram level
Test on both ipv4 and ipv6, optionally with ethtool changes to
disable scatter-gather, tx checksum or tso offload. All of these
can affect zerocopy behavior.
The regression test can be run on a single machine if over a veth
pair. Then skb_orphan_frags_rx must be modified to be identical to
skb_orphan_frags to allow forwarding zerocopy locally.
The msg_zerocopy.sh script will setup the veth pair in network
namespaces and run all tests.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ACPICA commit 343fc31840d40c06001f3b170ee5bcdfd3c7f3e0
ACPI spec allows to configure different 32-bit/64-bit table addresses for
DSDT and FACS. And for FACS, it's meaningful to dump both of them as they
are used to support different suspend protocols.
While:
1. on Linux, only 1 instance is supported for DSDT/FACS; and
2. on EFI, the code in osl_get_table() is buggy with special table instances,
causing endless file dump for such tables (reported by Shao Ming in link
#2).
This patch adds DSDT/FACS instance support for Linux/EFI acpidump. Fixed by
Lv Zheng.
Link: https://github.com/acpica/acpica/commit/343fc318
Link: https://bugs.acpica.org/show_bug.cgi?id=1407 [#1]
Link: https://github.com/acpica/acpica/issues/285 [#2]
Reported-by: Shao Ming <smbest163@163.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 01b8f5a2350b9cc329cd8402ac8faec36fc501f5
In order to build ACPICA EFI tools with EDK-II on Windows, 64-bit
multiply/shift supports are also required to be implemented. Otherwise,
MSVC complains:
acpidump.lib(utstrtoul64.obj) : error LNK2001: unresolved external symbol __allmul
acpidump.lib(uthex.obj) : error LNK2001: unresolved external symbol __aullshr
Note:
1. This patch also splits _EDK2_EFI from _GNU_EFI as they might have
different math64 supports.
2. Support of gcc math64 is not included in this patch.
3. Support of EDK2 arch independent math64 is done via linking to base_lib.
This patch fixes this issue. Reported by Shao Ming, fixed by Lv Zheng.
For Linux kernel, this patch is a functional no-op.
Link: https://github.com/acpica/acpica/commit/01b8f5a2
Tested-by: "Shao, Ming" <smbest163@163.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
No longer needed, now all managed by transparent VF logic.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the test to use TAP13 ksft framework for test output. Converting
error paths using err() and errx() will be done in another patch to make
it easier for review and change management.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
do_tests() runs sgidnonroot test without fork_wait(). As a result the
last test "Non-root +ia, sgidroot => i test" is left out. Fix it.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add the usr/include subdirectory of the top-level tree to the include
path to fix build when cross compiling for ARM.
testptp.c: In function 'main':
testptp.c:289:15: error: 'struct ptp_clock_caps' has no member named 'cross_timestamping'
caps.cross_timestamping);
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
After the link tests, there is a race on one side of the test for
the link coming up. It's possible, in some cases, for the test script
to write to the 'peer_trans' files before the link has come up.
To fix this, we simply use the link event file to ensure both sides
see the link as up before continuning.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Fixes: a9c59ef774 ("ntb_test: Add a selftest script for the NTB subsystem")
Two minor conflicts in virtio_net driver (bug fix overlapping addition
of a helper) and MAINTAINERS (new driver edit overlapping revamp of
PHY entry).
Signed-off-by: David S. Miller <davem@davemloft.net>
We will use it to generate tables for beautifying ioctl's 'cmd' arg.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-nxwpq34hu6te1m2ra5m7o8n9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not all subsystems use the fact that we may have the same _IOC_NR for
different _IOC_DIR, as in the end it'll result in a different ioctl
number.
So, for instance, vhost virtio has:
#define VHOST_GET_FEATURES _IOR(VHOST_VIRTIO, 0x00, __u64)
#define VHOST_SET_FEATURES _IOW(VHOST_VIRTIO, 0x00, __u64)
So same _IOC_NR (0x00) but different _IOC_DIR (R versus W), but it also
have:
#define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct vhost_vring_state)
#define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct vhost_vring_state)
A "get" operation that uses a "W" _IOC_DIR, and its implementation, uses
copy_to_user, it should've probably been _IOR().
Then:
/* Base value where queue looks for available descriptors */
#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
/* Get accessor: reads index, writes value in num */
#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
So we'll need to use _IOC_DIR() to disambiguate the VHOST_VIRTIO ioctl
bautifier.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rq6q717ql7j2z7kuccafgq84@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will use it to generate tables for beautifying ioctl's 'cmd' arg.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-nxwpq34hu6te1m2ra5m7o8n9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This time we try a new approach, using a copy of uapi/sound/asound.h we
auto generate the string tables, then include it in the ioctl cmd
beautifier.
This way either the sound developers will add the new commands to the
tools/ copy, like is happening with other areas of tools/include/ (bpf.h
comes to mind), or we'll be notified when building perf that our copy
drifted.
E.g.:
# perf trace -p 22084 -e ioctl 2>&1 | head -5
0.000 ( 0.068 ms): alsa-sink-ALC3/22084 ioctl(fd: 49</dev/snd/pcmC1D0p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x557f8d7fa0f0) = 0
0.344 ( 0.041 ms): alsa-sink-ALC3/22084 ioctl(fd: 46</dev/snd/controlC1>, cmd: SNDRV_CTL_ELEM_READ, arg: 0x7fe764018ee0) = 0
0.403 ( 0.011 ms): alsa-sink-ALC3/22084 ioctl(fd: 49</dev/snd/pcmC1D0p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x557f8d7fa0f0) = 0
0.427 ( 0.009 ms): alsa-sink-ALC3/22084 ioctl(fd: 49</dev/snd/pcmC1D0p>, cmd: SNDRV_PCM_STATUS_EXT, arg: 0x7fe76c2e0b30) = 0
2.461 ( 0.042 ms): alsa-sink-ALC3/22084 ioctl(fd: 49</dev/snd/pcmC1D0p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x557f8d7fa0f0) = 0
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8zuyf3e3u6jjcb2xzerw0kdi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will use it to generate tables for beautifying ioctl's 'cmd' arg.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wit4wwmrh9d37dtgtk0glbbj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will use it to generate tables for beautifying ioctl's 'cmd' arg.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bqoq114h917u6ggazn8m1w0t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By using the _IOC_(DIR,NR,TYPE,SIZE) macros to lookup a 'type' keyed
table that then gets indexed by 'nr', falling back to a notation similar
to the one used by 'strace', only more compact, i.e.:
474.356 ( 0.007 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xae, 0x1c), arg: 0x7ffc934f7880) = 0
474.369 ( 0.053 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xb0, 0x18), arg: 0x7ffc934f77d0) = 0
505.055 ( 0.014 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xaf, 0x4), arg: 0x7ffc934f741c) = 0
This also moves it out of builtin-trace.c and into trace/beauty/ioctl.c
to better compartimentalize all these formatters.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-s3enursdxsvnhdomh6qlte4g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull networking fixes from David Miller:
1) Handle notifier registry failures properly in tun/tap driver, from
Tonghao Zhang.
2) Fix bpf verifier handling of subtraction bounds and add a testcase
for this, from Edward Cree.
3) Increase reset timeout in ftgmac100 driver, from Ben Herrenschmidt.
4) Fix use after free in prd_retire_rx_blk_timer_exired() in AF_PACKET,
from Cong Wang.
5) Fix SElinux regression due to recent UDP optimizations, from Paolo
Abeni.
6) We accidently increment IPSTATS_MIB_FRAGFAILS in the ipv6 code
paths, fix from Stefano Brivio.
7) Fix some mem leaks in dccp, from Xin Long.
8) Adjust MDIO_BUS kconfig deps to avoid build errors, from Arnd
Bergmann.
9) Mac address length check and buffer size fixes from Cong Wang.
10) Don't leak sockets in ipv6 udp early demux, from Paolo Abeni.
11) Fix return value when copy_from_user() fails in
bpf_prog_get_info_by_fd(), from Daniel Borkmann.
12) Handle PHY_HALTED properly in phy library state machine, from
Florian Fainelli.
13) Fix OOPS in fib_sync_down_dev(), from Ido Schimmel.
14) Fix truesize calculation in virtio_net which led to performance
regressions, from Michael S Tsirkin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
samples/bpf: fix bpf tunnel cleanup
udp6: fix jumbogram reception
ppp: Fix a scheduling-while-atomic bug in del_chan
Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config"
virtio_net: fix truesize for mergeable buffers
mv643xx_eth: fix of_irq_to_resource() error check
MAINTAINERS: Add more files to the PHY LIBRARY section
ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev()
net: phy: Correctly process PHY_HALTED in phy_stop_machine()
sunhme: fix up GREG_STAT and GREG_IMASK register offsets
bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len
tcp: avoid bogus gcc-7 array-bounds warning
net: tc35815: fix spelling mistake: "Intterrupt" -> "Interrupt"
bpf: don't indicate success when copy_from_user fails
udp6: fix socket leak on early demux
net: thunderx: Fix BGX transmit stall due to underflow
Revert "vhost: cache used event for better performance"
team: use a larger struct for mac address
net: check dev->addr_len for dev_set_mac_address()
phy: bcm-ns-usb3: fix MDIO_BUS dependency
...
In 04df41e343 ("bpf: update tools/include/uapi/linux/bpf.h") the files
added in 40304b2a15 ("bpf: BPF support for sock_ops") were added to
tools/include, but not in a verbatim way, missing the comments, which
ends up triggering this warning when build tools/perf/:
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
Make sure the the lines are equal, to fix the simple header copy
drift detector in tools/perf/.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lawrence Brakmo <brakmo@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 04df41e343 ("bpf: update tools/include/uapi/linux/bpf.h")
Link: http://lkml.kernel.org/n/tip-z9qyyqht9qq3yyxu76sfy0dh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We copy headers from include/, arch/ to allow tools/ use defines,
structs from newer kernels and still be able to build on older systems.
We then, as part of a build, check if those copies got out of sync, when
we emit a warning, so that we can check if something needs to be
reflected on the tools, e.g. a 'perf trace' syscall argument beautifier
needs tweaking.
But we don't have to be super strict with that, for instance, extra
spaces, tabs or blank lines aren't problematic, so change
check-headers.sh to have "--ignore-blank-lines --ignore-space-change" as
default "diff" arguments.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d8emqpdc3m2qtzt1ei8ra2tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can build on older systems where otherwise we would end up
with:
CC /tmp/build/perf/trace/beauty/ioctl.o
trace/beauty/ioctl.c: In function 'ioctl__scnprintf_tty_cmd':
trace/beauty/ioctl.c:25:17: error: 'TIOCGEXCL' undeclared (first use in this function)
trace/beauty/ioctl.c:25:17: note: each undeclared identifier is reported only once for each function it appears in
trace/beauty/ioctl.c:25:2: error: array index in initializer not of integer type
trace/beauty/ioctl.c:25:2: error: (near initialization for 'ioctl_tty_cmd')
This way we can build a tool on an older system and it will still be
capable of processing perf.data files generated on newer systems.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8qvkv6txwuzua6d0yvt65wl3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 2be7e212d5 ("bpf: add bpf_skb_adjust_room helper") BPF_ADJ_ROOM_NET was
added to include/uapi/linux/bpf.h but BPF_ADJ_ROOM_NET_OPS was added to
tools/include/uapi/linux/bpf.h, making these files differ, fix it by using the
same name in both, BPF_ADJ_ROOM_NET, the one in the kernel headers copy.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 2be7e212d5 ("bpf: add bpf_skb_adjust_room helper")
Link: http://lkml.kernel.org/n/tip-2bmwovi9lymplyz6wsszppyf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sync up (copy) the following v4.13 kernel headers to the tooling headers:
arch/arm/include/uapi/asm/kvm.h:
arch/arm64/include/uapi/asm/kvm.h:
arch/powerpc/include/uapi/asm/kvm.h:
arch/s390/include/uapi/asm/kvm.h:
- KVM ABI extensions, which do not affect perf tooling
arch/x86/include/asm/cpufeatures.h:
arch/x86/include/asm/disabled-features.h:
- New PCID CPU feature on Intel CPUs - does not affect tooling.
I.e. no real changes were needed to resolve the build warnings, just a plain copy
of the latest kernel header version.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Geneviève Bastien <gbastien@versatic.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170730095232.4j4xigsoqwufl5hu@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In this patch we changed the header checks:
perf build: Clarify header version warning message
Unfortunately the header checks were copied to various places and thus the message got
out of sync. Fix some of them here.
Note that there's still old, misleading messages remaining in:
tools/objtool/Makefile: || echo "warning: objtool: x86 instruction decoder differs from kernel" >&2 )) || true
tools/objtool/Makefile: || echo "warning: objtool: orc_types.h differs from kernel" >&2 )) || true
here objtool copied the perf message, plus:
tools/perf/util/intel-pt-decoder/Build: || echo "Warning: Intel PT: x86 instruction decoder differs from kernel" >&2 )) || true
here the PT code regressed over the original message and only emits a vague warning
instead of specific file names...
All of this should be consolidated into tools/Build/ and used in a consistent
manner.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Geneviève Bastien <gbastien@versatic.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170730095130.bblldwxjz5hamybb@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change this:
Warning: arch/x86/include/asm/disabled-features.h differs from kernel
Warning: arch/x86/include/asm/cpufeatures.h differs from kernel
Warning: arch/powerpc/include/uapi/asm/kvm.h differs from kernel
Warning: arch/s390/include/uapi/asm/kvm.h differs from kernel
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/kvm.h' differs from latest version at 'arch/powerpc/include/uapi/asm/kvm.h'
Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h'
... to make it clearer what the warning is about, and to make it easier
to diff the two versions when syncing up the files.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Geneviève Bastien <gbastien@versatic.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170730093747.qogjn3lp7ntwcgwg@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New features:
- Add PERF_SAMPLE_CALLCHAIN and PERF_RECORD_MMAP[2] to 'perf data' CTF
conversion, allowing CTF trace visualization tools to show callchains
and to resolve symbols (Geneviève Bastien)
Improvements:
- Use group read for event groups in 'perf stat', reducing overhead when
groups are defined in the event specification, i.e. when using {} to
enclose a list of events, asking them to be read at the same time,
e.g.: "perf stat -e '{cycles,instructions}'" (Jiri Olsa)
Fixes:
- Do not overwrite perf_sample->weight in 'perf annotate' when
processing samples, use whatever came from the kernel when
perf_event_attr.sample_type has PERF_SAMPLE_WEIGHT set or just handle
its default value, 0, when that is not set and "weight" is one of the
sort orders chosen (Arnaldo Carvalho de Melo)
- 'perf annotate --show-total-period' fixes:
- TUI should show period, not nr_samples
- Set appropriate column width for period/percent
- Fix the column header to show "Period" when when that is what
is being asked for
(Taeung Song, Arnaldo Carvalho de Melo)
- Use default sort if evlist is empty, fixing pipe mode (David Carrillo-Cisneros)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=sXpq
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.14-20170728' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes for 4.14 from Arnaldo Carvalho de Melo:
New features:
- Add PERF_SAMPLE_CALLCHAIN and PERF_RECORD_MMAP[2] to 'perf data' CTF
conversion, allowing CTF trace visualization tools to show callchains
and to resolve symbols (Geneviève Bastien)
Improvements:
- Use group read for event groups in 'perf stat', reducing overhead when
groups are defined in the event specification, i.e. when using {} to
enclose a list of events, asking them to be read at the same time,
e.g.: "perf stat -e '{cycles,instructions}'" (Jiri Olsa)
Fixes:
- Do not overwrite perf_sample->weight in 'perf annotate' when
processing samples, use whatever came from the kernel when
perf_event_attr.sample_type has PERF_SAMPLE_WEIGHT set or just handle
its default value, 0, when that is not set and "weight" is one of the
sort orders chosen (Arnaldo Carvalho de Melo)
- 'perf annotate --show-total-period' fixes:
- TUI should show period, not nr_samples
- Set appropriate column width for period/percent
- Fix the column header to show "Period" when when that is what
is being asked for
(Taeung Song, Arnaldo Carvalho de Melo)
- Use default sort if evlist is empty, fixing pipe mode (David Carrillo-Cisneros)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Apparently through one of my revisions of the initial patches
series I lost the devmap test. We can add more testing later but
for now lets fix the simple one we have.
Fixes: 546ac1ffb7 "bpf: add devmap, a map for storing net device references"
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds documentation on the environment variables needed to the
message telling that no conversion support is compiled in.
Committer testing:
$ make -C tools/perf install
$ perf data convert --all --to-ctf myctftrace
No conversion support compiled in. perf should be compiled with environment variables LIBBABELTRACE=1 and LIBBABELTRACE_DIR=/path/to/libbabeltrace/
$
Signed-off-by: Geneviève Bastien <gbastien@versatic.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170727181205.24843-3-gbastien@versatic.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds the mmap and mmap2 events to the CTF trace obtained from perf
data.
These events will allow CTF trace visualization tools like Trace Compass
to automatically resolve the symbols of the callchain to the
corresponding function or origin library.
To include those events, one needs to convert with the --all option.
Here follows an output of babeltrace:
$ sudo perf data convert --all --to-ctf myctftrace
$ babeltrace ./myctftrace
[19:00:00.000000000] (+0.000000000) perf_mmap2: { cpu_id = 0 },
{ pid = 638, tid = 638, start = 0x7F54AE39E000, filename =
"/usr/lib/ld-2.25.so" }
[19:00:00.000000000] (+0.000000000) perf_mmap2: { cpu_id = 0 }, { pid =
638, tid = 638, start = 0x7F54AE565000, filename =
"/usr/lib/libudev.so.1.6.6" }
[19:00:00.000000000] (+0.000000000) perf_mmap2: { cpu_id = 0 }, { pid =
638, tid = 638, start = 0x7FFC093EA000, filename = "[vdso]" }
Signed-off-by: Geneviève Bastien <gbastien@versatic.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170727181205.24843-2-gbastien@versatic.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Convert test to use TAP13 ksft framework. Output after conversion:
TAP version 13
# [RUN] Testing sync framework
ok 1 [RUN] test_alloc_timeline
ok 2 [RUN] test_alloc_fence
ok 3 [RUN] test_alloc_fence_negative
ok 4 [RUN] test_fence_one_timeline_wait
ok 5 [RUN] test_fence_one_timeline_merge
ok 6 [RUN] test_fence_merge_same_fence
ok 7 [RUN] test_fence_multi_timeline_wait
ok 8 [RUN] test_stress_two_threads_shared_timeline
ok 9 [RUN] test_consumer_stress_multi_producer_single_consumer
ok 10 [RUN] test_merge_stress_random_merge
Pass 10 Fail 0 Xfail 0 Xpass 0 Skip 0
1..10
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Some tests print final pass/fail message based on fail count. Add
ksft_get_*_cnt() API to kselftest framework to return counts.
Update ksft_print_cnts() to print the test results summary message with
individual pass, fail, ... counters.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Sync test doesn't differentiate between sync unsupported and test run
by non-root user and treats both as unsupported cases.
Fix it to add handling for these two different scenarios.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Either when we start 'perf annotate' or 'perf report' with
--show-total-period or when we, in the annotate browser, press 't' to
toggle period/percent for the first column, we need to adjust the width
for the 'period' case.
Based-on-a-patch-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-n2np5qcs20u6qjdr9orygne6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have the 't' hotkey to toggle showing either the total period or the
percentage of samples for a given line, but we forgot to toggle as well
the column header, always showing "Percent", even when showing the
period, fix it.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1501172169-6761-1-git-send-email-treeze.taeung@gmail.com
[ Extracted from a larger patch, s/Event count/Period/g ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In commit f8f4aaead5 ("perf annotate: Finally display IPC and cycle
accounting") the 'pcnt_width' variable was abused in a few places to
also include the optional width of the "IPC" and "cycles" columns, while
in other places we stopped using 'pcnt_width' and instead its previous
equation...
Now that we need to tap into annotate_browser__pcnt_width() to consider
if --show-total-period is being used and instead of that hardcoded 7
(strlen("Percent")) we need to use it or strlen("Event count") we need
this properly clarified to avoid having to touch all the (7 * nr_events)
places.
Clarify this by introducing a separate annotate_browser__cycles_width()
to leave the pcnt_width calculate just what its name implies.
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-szgb07t4k5wtvks8nzwkg710@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were showing the number of samples, not the total period, fix it.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: 0c4a5bcea4 ("perf annotate: Display total number of samples with --show-total-period")
Link: http://lkml.kernel.org/r/1500500223-16753-1-git-send-email-treeze.taeung@gmail.com
[ extracted from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just paving the way to fix --show-total-period in the TUI, i.e. now
we save in struct disasm_line_samples not just the number of samples,
but also the total period.
Based-on-a-patch-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-1sup5hkwrxocjvrmrmhs732o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The existing loop incremented the offset while using it as the array
index, when we went to an array of sym_hist_entry instances, we
should've moved the increment to outside of the array element reference,
oops, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 461c17f00f ("perf annotate: Store the sample period in each histogram bucket")
Link: http://lkml.kernel.org/n/tip-s3dm6uyrazlpag3f0psfia07@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Objtool is failing to build with GCC 4.4.7 due to the following
warnings:
cc1: warnings being treated as errors
In file included from orc.h:21,
from orc_gen.c:21:
orc_types.h:86: error: packed attribute is unnecessary for ‘sp_offset’
orc_types.h:87: error: packed attribute is unnecessary for ‘bp_offset’
orc_types.h:88: error: packed attribute is unnecessary for ‘sp_reg’
I suspect those warnings are a GCC bug. But -Wpacked isn't very useful
anyway, so just disable it.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 627fce1480 ("objtool: Add ORC unwind table generation")
Link: http://lkml.kernel.org/r/76d85d7b5a87566465095c500bce222ff5d7b146.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With '-mtune=atom', which is enabled with CONFIG_MATOM=y, GCC uses some
unusual instructions for setting up the stack.
Instead of:
mov %rsp, %rbp
it does:
lea (%rsp), %rbp
And instead of:
add imm, %rsp
it does:
lea disp(%rsp), %rsp
Add support for these instructions to the objtool decoder.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: baa41469a7 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/4ea1db896e821226efe1f8e09f270771bde47e65.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a whitelisted function uses one of the ALTERNATIVE macros, it
produces false positive warnings like:
arch/x86/kvm/vmx.o: warning: objtool: .altinstr_replacement+0x0: unreachable instruction
arch/x86/kvm/svm.o: warning: objtool: .altinstr_replacement+0x6e: unreachable instruction
There's no easy way to whitelist alternative instructions, so instead
just skip any 'unreachable' warnings associated with them.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a5d0a8c60155f03b36a31fac871e12cf75f35fd0.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnd reported some false positive warnings with GCC 7:
drivers/hid/wacom_wac.o: warning: objtool: wacom_bpt3_touch()+0x2a5: stack state mismatch: cfa1=7+8 cfa2=6+16
drivers/iio/adc/vf610_adc.o: warning: objtool: vf610_adc_calculate_rates() falls through to next function vf610_adc_sample_set()
drivers/pwm/pwm-hibvt.o: warning: objtool: hibvt_pwm_get_state() falls through to next function hibvt_pwm_remove()
drivers/pwm/pwm-mediatek.o: warning: objtool: mtk_pwm_config() falls through to next function mtk_pwm_enable()
drivers/spi/spi-bcm2835.o: warning: objtool: .text: unexpected end of section
drivers/spi/spi-bcm2835aux.o: warning: objtool: .text: unexpected end of section
drivers/watchdog/digicolor_wdt.o: warning: objtool: dc_wdt_get_timeleft() falls through to next function dc_wdt_restart()
When GCC 7 detects a potential divide-by-zero condition, it sometimes
inserts a UD2 instruction for the case where the divisor is zero,
instead of letting the hardware trap on the divide instruction.
Objtool doesn't consider UD2 to be fatal unless it's annotated with
unreachable(). So it considers the GCC-generated UD2 to be non-fatal,
and it tries to follow the control flow past the UD2 and gets
confused.
Previously, objtool *did* assume UD2 was always a dead end. That
changed with the following commit:
d1091c7fa3 ("objtool: Improve detection of BUG() and other dead ends")
The motivation behind that change was that Peter was planning on using
UD2 for __WARN(), which is *not* a dead end. However, it turns out
that some emulators rely on UD2 being fatal, so he ended up using
'ud0' instead:
9a93848fe7 ("x86/debug: Implement __WARN() using UD0")
For GCC 4.5+, it should be safe to go back to the previous assumption
that UD2 is fatal, even when it's not annotated with unreachable().
But for pre-4.5 versions of GCC, the unreachable() macro isn't
supported, so such cases of UD2 need to be explicitly annotated as
reachable.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d1091c7fa3 ("objtool: Improve detection of BUG() and other dead ends")
Link: http://lkml.kernel.org/r/e57fa9dfede25f79487da8126ee9cdf7b856db65.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The buffer passed to bpf_obj_get_info_by_fd() should be initialized
to zeros. Kernel will enforce that to guarantee we can safely extend
info structures in the future.
Making the bpf_obj_get_info_by_fd() call in libbpf perform the zeroing
is problematic, however, since some members of the info structures
may need to be initialized by the callers (for instance pointers
to buffers to which kernel is to dump translated and jited images).
Remove the zeroing and fix up the in-tree callers before any kernel
has been released with this code.
As Daniel points out this seems to be the intended operation anyway,
since commit 95b9afd398 ("bpf: Test for bpf ID") is itself setting
the buffer pointers before calling bpf_obj_get_info_by_fd().
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use [ ! -z "$VAR" ] instead of [ "$VAR" ] to check
whether the given string variable is not zero-length
since it obviously shows what it means.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <srostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Output logs only to console if "-" is given to --logdir
option. In this case, ftracetest doesn't record any log
on the disk, and all logs immediately shown (including
all command logs.) Since there is no "tee" in the middle
of command and console, it outputs the log really soon.
This option is useful only when the console is logged.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <srostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add 3-level verbosity for showing traced command log
on console immediately. Since some test cases can cause
kernel pacic if there is a probrem (like regression etc.),
we can not know which command caused the problem without
traced command log. This verbosity (-vvv) solves that
because it shows the log on console immediately. User
can get continuous command/error log.
Note that this is a kind of kernel debug mode, if you
don't see any kernel related issue, you don't need this
verbosity.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <srostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add --fail-unsupported option to fail the test result if
ftracetest gets UNSUPPORTED result. UNSUPPORTED usually
happens when the kernel is old (e.g. stable tree) or some
kernel feature is disabled.
However, if newer kernel has any bug or regression, it
can make test results in UNSUPPORTED too. This option
can detect such kernel regression.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <srostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Do not return failure exit code (1) for unsupported testcases,
since it is expected for stable kernels.
Previously, ftracetest is expected to run only on current
release for avoiding regressions. However, nowadays we run
it on stable kernels. This means some test cases must return
unsupported result. In such case, we should NOT exit
ftracetest with error status for unsupported results so that
kselftest (upper tests wrapper) shows it passed correctly.
Note that we continue to treat unresolved results as failure,
if test writers would like to notice user that the test result
should be reviewed, they can use exit_unresolved.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <srostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add a new target to install the bpf.h header to $(prefix)/include/bpf/
directory. This is necessary to build standalone applications using
libbpf, without the need to clone the kernel sources and point to them.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we set the first column header according to wether
--show-total-period is being used, we need to size it accordingly.
Based-on-a-patch-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-pu504ffnit4m334k09hxcbs3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes bug noted by Jiri in https://lkml.org/lkml/2017/6/13/755 and
caused by commit d49dadea78 ("perf tools: Make 'trace' or
'trace_fields' sort key default for tracepoint events") not taking into
account that evlist is empty in pipe-mode.
Before this commit, pipe mode will only show bogus "100.00% N/A"
instead of correct output as follows:
$ perf record -o - sleep 1 | perf report -i -
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
#
# Total Lost Samples: 0
#
# Samples: 8 of event 'cycles:ppH'
# Event count (approx.): 145658
#
# Overhead Trace output
# ........ ............
#
100.00% N/A
Correct output, after patch:
$ perf record -o - sleep 1 | perf report -i -
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
#
# Total Lost Samples: 0
#
# Samples: 8 of event 'cycles:ppH'
# Event count (approx.): 191331
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. .................................
#
81.63% sleep libc-2.19.so [.] _exit
13.58% sleep ld-2.19.so [.] do_lookup_x
2.34% sleep [kernel.kallsyms] [k] context_switch
2.34% sleep libc-2.19.so [.] __GI___libc_nanosleep
0.11% perf [kernel.kallsyms] [k] __intel_pmu_enable_a
Reported-by: Jiri Olsa <jolsa@kernel.org>
Report-Link: https://lkml.kernel.org/r/20170613185422.GA6092@krava
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: d49dadea78 ("perf tools: Make 'trace' or 'trace_fields' sort key default for tracepoint events")
Link: https://lkml.kernel.org/r/20170721051157.47331-1-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we parse an event we may get a value from the kernel in response to
PERF_SAMPLE_WEIGHT being set in perf_event_attr->sample_type, and if it
is not set, then perf_sample->weight will be set to zero, which should
be ok according to a discussion with Andi Kleen [1]:
1: https://lkml.kernel.org/r/20170724174637.GS3044@two.firstfloor.org
Acked-by: Andi Kleen <andi@firstfloor.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8ev8ufk3lzmvgz37yg9nv3qz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make perf stat use group read if there are groups defined. The group
read will get the values for all member of groups within a single
syscall instead of calling read syscall for every event.
We can see considerable less amount of kernel cycles spent on single
group read, than reading each event separately, like for following perf
stat command:
# perf stat -e {cycles,instructions} -I 10 -a sleep 1
Monitored with "perf stat -r 5 -e '{cycles:u,cycles:k}'"
Before:
24,325,676 cycles:u
297,040,775 cycles:k
1.038554134 seconds time elapsed
After:
25,034,418 cycles:u
158,256,395 cycles:k
1.036864497 seconds time elapsed
The perf_evsel__open fallback changes contributed by Andi Kleen.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170726120206.9099-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_evsel__read_counter() to read single or group counter. After
calling this function the counter's evsel::counts struct is filled with
values for the counter and member of its group if there are any.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170726120206.9099-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we use the size of struct perf_counts_values to read the
event, which prevents us to put any new member to the struct.
Adding perf_evsel__read_size to return size of the buffer needed for
event read.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170726120206.9099-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using variables instead of hard paths makes the requirements information
more accurate.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is a nice buildsystem dedicated for userspace tools in Linux kernel tree.
Switch spi target to be built by it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This file was copied from the kernel so that we could build tools/perf/
on older systems where some newer defines, such as these are available:
CC trace/beauty/fcntl.o
trace/beauty/fcntl.c: In function ‘syscall_arg__scnprintf_fcntl_arg’:
trace/beauty/fcntl.c:93:13: error: ‘F_OFD_SETLK’ undeclared (first use in this function)
cmd == F_OFD_SETLK || cmd == F_OFD_SETLKW || cmd == F_OFD_GETLK ||
^
trace/beauty/fcntl.c:93:13: note: each undeclared identifier is reported only once for each function it appears in
trace/beauty/fcntl.c:93:35: error: ‘F_OFD_SETLKW’ undeclared (first use in this function)
cmd == F_OFD_SETLK || cmd == F_OFD_SETLKW || cmd == F_OFD_GETLK ||
^
trace/beauty/fcntl.c:93:58: error: ‘F_OFD_GETLK’ undeclared (first use in this function)
cmd == F_OFD_SETLK || cmd == F_OFD_SETLKW || cmd == F_OFD_GETLK ||
^
mv: cannot stat ‘trace/beauty/.fcntl.o.tmp’: No such file or directory
make[4]: *** [trace/beauty/fcntl.o] Error 1
make[3]: *** [trace/beauty] Error 2
make[3]: *** Waiting for unfinished jobs....
CC tests/llvm.o
But we need to make sure that it is also in the tools/perf/MANIFEST file, that
is used to build a tarball for detached (from the kernel sources) compilation,
which was failing, with the above message, on a RHEL7.4 system, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 84d1d8a12d ("tools include uapi asm-generic: Grab a copy of fcntl.h")
Link: http://lkml.kernel.org/n/tip-2d5px7aq5stbwi24pgirwtlm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the first column header is always "Percent", fix it to show
correct column name based on given options, i.e. if using
--show-total-period, show "Event count" as a first column.
Reported-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/c3c902e7-95bc-16d4-366f-12eb034c5c8d@gmail.com
[ Extracted from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Today, when a JSON file fails parsing the build continues, but there are
no json files built in, which is difficult to debug later. Make the
build stop on a parse error instead.
v2: Add fixes from Sukadev. Now we handle architectures
with no JSON events correctly. And fix some stale comments.
Committer note:
Tested by running the cross build container tests, that were all failing
for v1.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170725001638.19990-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current --branch-history LBR annotation displays confused data. For
example, each cycles report is duplicated on both "from" and "to"
entries.
For example:
perf report --branch-history --no-children --stdio
--2.32%--main div.c:39 (COND_BWD CROSS_2M predicted:49.7% cycles:1)
main div.c:44 (predicted:49.7% cycles:1)
main div.c:42 (RET CROSS_2M cycles:2)
compute_flag div.c:28 (cycles:2)
compute_flag div.c:27 (RET CROSS_2M cycles:1)
rand rand.c:28 (cycles:1)
rand rand.c:28 (RET CROSS_2M cycles:1)
__random random.c:298 (cycles:1)
__random random.c:297 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (RET CROSS_2M cycles:9)
The cycles should be tagged only on the "from". It's for the code block
that ends with "from", not for "to".
Another issue is the "predicted:49.7%" is duplicated too (tag on both
"from" and "to").
This patch tags the branch type/flag on "to" and tag the cycles on
"from".
For example:
--2.32%--main div.c:39 (COND_BWD CROSS_2M predicted:49.7%)
main div.c:44 (cycles:1)
main div.c:42 (RET CROSS_2M)
compute_flag div.c:28 (cycles:2)
compute_flag div.c:27 (RET CROSS_2M)
rand rand.c:28 (cycles:1)
rand rand.c:28 (RET CROSS_2M)
__random random.c:298 (cycles:1)
__random random.c:297 (COND_BWD CROSS_2M)
__random random.c:295 (cycles:1)
__random random.c:295 (COND_BWD CROSS_2M)
__random random.c:295 (cycles:1)
__random random.c:295 (RET CROSS_2M)
|
--2.23%--__random_r random_r.c:392 (cycles:9)
In this example, The "main div.c:39 (COND_BWD CROSS_2M predicted:49.7%)"
is "to" of branch and "main div.c:44 (cycles:1)" is "from" of branch.
It should be easier for understanding than before.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500894547-18411-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record -b -g <command>
perf report --branch-history
This merges the LBRs with the callgraphs.
However it would be nice if it also works without callgraphs (-g) set in
perf record, so that only the LBRs are displayed. But currently perf
report errors in this case. For example,
perf record -b <command>
perf report --branch-history
Error:
Selected -g or --branch-history but no callchain data. Did
you call 'perf record' without -g?
This patch displays the LBRs only even if callgraphs(-g) is not enabled
in perf record.
Change log:
v2: According to Milian Wolff's comment, change the obsolete error
message. Now the error message is:
┌─Error:─────────────────────────────────────┐
│Selected -g or --branch-history. │
│But no callchain or branch data. │
│Did you call 'perf record' without -g or -b?│
│ │
│ │
│Press any key... │
└────────────────────────────────────────────┘
When passing the last parameter to hists__fprintf,
changes "|" to "||".
hists__fprintf(hists, !quiet, 0, 0, rep->min_percent, stdout,
symbol_conf.use_callchain || symbol_conf.show_branchflag_count);
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1494240182-28899-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Modify the signature of tracepoint specific and trace_unhandled hooks to
add the perf_sample dict as a new argument.
Create a python helper function to print a dictionary.
Signed-off-by: Arun Kalyanasundaram <arunkaly@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Seongjae Park <sj38.park@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170721220422.63962-6-arunkaly@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The process_event python hook receives a dict with all perf_sample
entries, but the tracepoint specific and trace_unhandled hooks predate
the introduction of this dict, and do not receive it.
Add the aforementioned dict as an additional argument to the affected
handlers. To keep backwards compatibility (and avoid unnecessary work),
do not pass the dict if the number of arguments signals that handler
version predates this change.
Signed-off-by: Arun Kalyanasundaram <arunkaly@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Seongjae Park <sj38.park@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170721220422.63962-5-arunkaly@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Provide time_enabled, time_running and counter value in the perf_sample
dict.
Signed-off-by: Arun Kalyanasundaram <arunkaly@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Seongjae Park <sj38.park@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170721220422.63962-4-arunkaly@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the creation of the dict containing perf_sample entries into a
helper function to enable its reuse in other sample processing routines.
Signed-off-by: Arun Kalyanasundaram <arunkaly@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Seongjae Park <sj38.park@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170721220422.63962-3-arunkaly@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid allocating memory if hook handler is not available. This saves
unused memory allocation and simplifies error path.
Let handler in python_process_tracepoint point to either tracepoint
specific or trace_unhandled hook. Use dict to check if handler points to
trace_unhandled.
Remove the exit label in python_process_general_event and return when no
handler is available.
Signed-off-by: Arun Kalyanasundaram <arunkaly@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Seongjae Park <sj38.park@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170721220422.63962-2-arunkaly@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If script_desc__new() fails then the current code has a NULL
dereference. We don't actually need to do any cleanup, we can just
return NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20170722073610.nnsyiwdcfl6bhn4t@mwanda
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf top command needs to unshare its fs from the helper threads in
order to successfully setns(2) during its symbol lookup. It also needs
to impelement a force flag to ignore ownership of perf-<pid>.map files.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-6-git-send-email-kjlx@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When libelf is disabled in the configuration, we get the following
linker error:
LINK libperf-jvmti.so
ld: cannot find -lelf
Makefile.perf:515: recipe for target 'libperf-jvmti.so' failed
Jiri pointed out that both librt and libelf are not really required. So
this patch fixes the linker error by getting rid of unwanted libraries
in the linker stage.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 209045adc2 ("perf tools: add JVMTI agent library")
Link: http://lkml.kernel.org/r/20170719011839.99399-5-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf annotate' was missing the handler for tracing data records.
Prior to this patch we obtained "unhandled" records when piping trace
events to perf annotate (using -D option to show the dump_printf
messages in process_event_synth_tracing_data_stub):
$ perf record -o - -e block:bio_free sleep 2 | perf annotate -D --stdio
...
0x78 [0xc]: PERF_RECORD_TRACING_DATA: unhandled!
...
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170719011839.99399-4-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The goal is to allow users to override linking of libraries that
were automatically added to PERFLIBS.
EXCLUDE_EXTLIBS contains linker flags to be removed from LIBS
while EXTRA_PERFLIBS contains linker flags to be added.
My use case is to force certain library to be build statically,
e.g. for libelf:
EXCLUDE_EXTLIBS=-lelf EXTRA_PERFLIBS=path/libelf.a
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170719011839.99399-3-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When converting from atomic_t to refcount_t we didn't follow the usual
step of initializing it to one before taking any new reference, which
trips over checking if taking a reference for a freed refcount_t, fix
it.
Brendan's report:
---
It's 4.12-rc7, with node v4.4.1. I'm building 4.13-rc1 now, as I hit
what I think is another unrelated perf bug and I'm starting to wonder
what else is broken on that version:
(root) /mnt/src/linux-4.12-rc7/tools/perf # ./perf record -F 99 -a -e
cpu-clock --cgroup=docker/f9e9d5df065b14646e8a11edc837a13877fd90c171137b2ba3feb67a0201cb65
-g
perf: /mnt/src/linux-4.12-rc7/tools/include/linux/refcount.h:108:
refcount_inc: Assertion `!(!refcount_inc_not_zero(r))' failed.
Aborted
that used to work...
---
Testing it:
Before:
# perf stat -e cycles -C 0 --cgroup /
perf: /home/acme/git/linux/tools/include/linux/refcount.h:108: refcount_inc: Assertion `!(!refcount_inc_not_zero(r))' failed.
Aborted (core dumped)
#
After:
# perf stat -e cycles -C 0 --cgroup /
^C
Performance counter stats for 'CPU(s) 0':
132,081,393 cycles /
2.492942763 seconds time elapsed
#
Reported-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Acked-by: Elena Reshetova <elena.reshetova@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sudeep Holla <Sudeep.Holla@arm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 79c5fe6db8 ("perf cgroup: Convert cgroup_sel.refcnt from atomic_t to refcount_t")
Link: http://lkml.kernel.org/n/tip-l7ovfblq14ip2i08m1g0fkhv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390x the kernel text segment starts at address 0x0. When perf
report reads kernel symbols from vmlinux file it adds an offset of
0x1000.
For example see symbol set_reset_devices:
[root@s8360047 linux-devel]# nm -A vmlinux| fgrep set_reset_devices
vmlinux:0000000001379000 t set_reset_devices
[root@s8360047 linux-devel]#
[root@s8360047 linux-devel]# fgrep set_reset_devices /proc/kallsyms
0000000001379000 t set_reset_devices
[root@s8360047 linux-devel]#
The kernel symbol table and the vmlinux file have the same address for
symbol set_reset_devices namely 1379000.
When perf report reads this symbols it displays it with address
symbol__new: set_reset_devices 0x137a000-0x137a018
There is a difference between perf report and vmlinux of 0x1000.
The reason for the difference is at kernel symbol load time in function
dso__load_sym(). The vmlinux file is investigated with its ELF header.
Command readelf shows this:
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
[ 0] NULL 0000000000000000 00000000
0000000000000000 0000000000000000 0 0 0
[ 1] .text PROGBITS 0000000000000000 00001000
0000000000b0e0c2 0000000000000000 AX 0 0 128
This leads to an invalid calculation of the symbol start address, see
file utit/symbol-elf.c line 974:
/* Adjust symbol to map to file offset */
if (adjust_kernel_syms)
sym.st_value -= shdr.sh_addr - shdr.sh_offset;
With shdr.sh_addr set to 0x0 and shdr.sh_offset set to 0x1000 as read
from the ELF .text section 0x1000 is added to the symbol address.
I would like to fix this by introducing an archticture specific function
named elf__needs_adjust_symbols(). This is the same approach as done by
PowerPC. The function currently does not exist for s390x and the
default weak one is used. The s390x specific one returns false when
symsrc_init() is invoked for kernel symbols and results in variable
adjust_kernel_syms being false. This omits the adjustment and the
correct address is displayed (when symbol resolvement does not work).
The s390x specific function returns false for kernel symbol adjustment
and returns true for kernel modules, processes and shared libraries.
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
LPU-Reference: 20170713130252.6167-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were showing the total number of samples, not the total period as
asked by the user, fix it.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/n/tip-lh2nh89rtqn5x5vbfthw6qml@git.kernel.org
Fixes: 0c4a5bcea4 ("perf annotate: Display total number of samples with --show-total-period")
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Objtool tries to silence 'unreachable instruction' warnings when it
detects gcov is enabled, because gcov produces a lot of unreachable
instructions and they don't really matter.
However, the 0-day bot is still reporting some unreachable instruction
warnings with CONFIG_GCOV_KERNEL=y on GCC 4.6.4.
As it turns out, objtool's gcov detection doesn't work with older
versions of GCC because they don't create a bunch of symbols with the
'gcov.' prefix like newer versions of GCC do.
Move the gcov check out of objtool and instead just create a new
'--no-unreachable' flag which can be passed in by the kernel Makefile
when CONFIG_GCOV_KERNEL is defined.
Also rename the 'nofp' variable to 'no_fp' for consistency with the new
'no_unreachable' variable.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 9cfffb1168 ("objtool: Skip all "unreachable instruction" warnings for gcov kernels")
Link: http://lkml.kernel.org/r/c243dc78eb2ffdabb6e927844dea39b6033cd395.1500939244.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The maxcpus= kernel boot parameter limits the number of CPUs brought
online at boot time, but it does nothing to prevent additional CPUs
from being brought up later. Placing a hard cap on the total number
of CPUs is instead the job of the nr_cpus= boot parameter. This commit
therefore switches the configfrag_boot_cpus() shell function from maxcpus=
to nr_cpus=. This commit also adds a nr_cpus=43 kernel parameter to RCU's
TREE01 test scenario, but retains the maxcpus=8 kernel parameter in order
to test the ability of RCU expedited grace periods to handle new CPUs
coming online for the first time during grace-period initialization.
Finally, this commit makes the torture scheduling allow maxcpus= to
override other means of specifying the number of CPUs to allow for.
This last works because the torture kernel modules size their workloads
based on the number of CPUs present at the start of the test, not the
ultimate number of CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Strings used in event tracing need to be specially handled, for example,
being copied to the trace buffer instead of being pointed to by the trace
buffer. Although the TPS() macro can be used to "launder" pointed-to
strings, this might not be all that effective within a loadable module.
This commit therefore copies rcutorture's strings to the trace buffer.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Currently, rcutorture groups runs in batches, building each scenario in
a given batch, then invoking qemu to run all the kernels in the batch.
Of course, if a given scenario's kernel fails to build, there is no qemu
run for that scenario. And if all of the kernels in a given batch fail
to build, there are no runs, and rcutorture immediately starts on the
next batch.
But not if --jitter has been specified, which it is by default. In this
case, the jitter scripts are started unconditionally, and rcutorture
waits for them to complete, even though there are no kernels to run.
This commit therefore checks for this situation, and refuses to start
jitter unless at least one of the kernels in the batch built successfully.
This saves substantial time when all scenarios' kernels fail to build,
particularly if a long --duration was specified.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, testing a variant of an existing scenario requires editing
that scenario's file or creating a new scenario file. This is messy
and error prone with respect to changes to scenarios.
This commit therefore adds a --kconfig argument to kvm.sh, so that
'--kconfig "CONFIG_RCU_TRACE=y CONFIG_RCU_EQS_DEBUG=n" will override those
two Kconfig options. In addition, there is now clear precedence:
the config fragment overrides CFcommon, and the --kconfig argument
overrides both.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit selects CONFIG_PROVE_LOCKING for the SRCU-u scenario
to get better test coverage.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Classic SRCU is no more, so this commit removes the corresponding
rcutorture boot-parameters file.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There is a bug in the verifier's handling of BPF_SUB: [a,b] - [c,d] yields
was [a-c, b-d] rather than the correct [a-d, b-c]. So here is a test
which, with the bogus handling, will produce ranges of [0,0] and thus
allowed accesses; whereas the correct handling will give a range of
[-255, 255] (and hence the right-shift will give a range of [0, 255]) and
the accesses will be rejected.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the Makefile rules so that the test is
automatically installed (and cleaned) by leveraging
the TEST_GEN_PROGS_EXTENDED definition.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Some watchdog drivers implement WDIOF_CARDRESET feature. As example,
see commit b6ef36d2c1 ("watchdog: qcom: Report reboot reason").
This option allows reporting to userspace the cause of the last boot
(POR/watchdog reset), being helpful in e.g. automated test-cases.
Add support for WDIOC_GETBOOTSTATUS in the test code, to be able to:
- check if watchdog drivers properly implement WDIOF_CARDRESET.
- check the last boot status, if WDIOF_CARDRESET is implemented.
Make the `-b, --bootstatus` option one-shot. That means, skip the
keepalive mechanism if `-b` is provided on the command line, as we
are only interested in the boot status information.
Tested on Rcar-H3 Salvator-X board:
********************** Cold boot finished
salvator-x:/home/root# ./watchdog-test -h
Usage: ./watchdog-test [options]
-b, --bootstatus Get last boot status (Watchdog/POR)
-d, --disable Turn off the watchdog timer
-e, --enable Turn on the watchdog timer
-h, --help Print the help message
-p, --pingrate=P Set ping rate to P seconds (default 1)
-t, --timeout=T Set timeout to T seconds
Parameters are parsed left-to-right in real-time.
Example: ./watchdog-test -d -t 10 -p 5 -e
salvator-x:/home/root#
salvator-x:/home/root# ./watchdog-test -b
Last boot is caused by: Power-On-Reset.
salvator-x:/home/root#
salvator-x:/home/root# ./watchdog-test -d -t 1 -p 2 -e
Watchdog card disabled.
Watchdog timeout set to 1 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
Watchdog Ticking Away!
********************** Reboot due to watchdog trigger finished
salvator-x:/home/root# ./watchdog-test -b
Last boot is caused by: Watchdog.
salvator-x:/home/root#
salvator-x:/home/root# reboot
********************** Reboot due to user action finished
salvator-x:/home/root# ./watchdog-test -b
Last boot is caused by: Power-On-Reset.
salvator-x:/home/root#
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Calling `watchdog-test [options] -p 0` results in flooding the kernel
with WDIOC_KEEPALIVE. Fix this by enforcing 1 second as minimal/default
keepalive/ping rate.
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
commit f15d7114bb ("Documentation/watchdog: add timeout and ping rate
control to watchdog-test.c") used both atoi() and strtoul() for string
to integer conversion. As usage of atoi() is discouraged in newer code,
replace it with strtoul() for consistency.
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Switch from manual argv[] parsing to getopt_long() argument processing.
This creates more readable code and allows easier feature addition.
This also fixes some segmentation faults introduced by
commit 1dbdcc8109 ("selftests: watchdog: accept multiple params on
command line"), when options -t or -p are not given the required value:
./watchdog-test -p 1 -t
./watchdog-test -t 1 -p
No changes are intended in the way watchdog-test interacts with the
kernel. The only noticible changes, tightly related to the addition
of getopt (and done for easier maintenance), are:
- help message has been reworked and migrated to a dedicated function.
- all short/long options and the help message are sorted alphabetically.
- all case statements inside the getopt loop are sorted alphabetically.
Fixes: 1dbdcc8109 ("selftests: watchdog: accept multiple params on command line")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Convert spaces to tabs for checkpatch compliance. Quick way to verify
this is by running `git show -w <commit-id>`, which returns an empty
commit body. No functional change intended.
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Create a config fragment for nsfs to enable additional config options.
The config fragments can be used with the help of
scripts/kconfig/merge_config.sh.
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
update help text and man pages for both tools
- added more examples and separated them by category
Makefile upgrades
- uninstall: remove errors from uninstall if tool not found
- install: perform uninstall before install
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- changed output from single html file to dir with html/dmesg/ftrace
- add sysinfo to logs and timeline
- add -sysinfo command, displays dmidecode values and cpu/mem info
- set trace buffer size to lesser of memtotal/2 or 2GB when using callgraph
- extended timeline to the last init call in user space
separated timeline into two phases, kernel mode & user mode
- add kernel version check for ftrace usage, 4.10 minimum
- change -filter argument to -func
- add strict protections on -func usage with full symbol checks
now only works for statically linked functions
cmd -flistall now ignores all loadable module functions
- add -cgfilter argument for reducing timeline size by removing callgraphs
- crontab usage: preserve existing @reboot lines in user crontab
- fedora support added: uses grub2 loader, handles fedora crontab
- stop using "which" to find binaries, search pre-defined path list
- moved most output processing to analyze_suspend library
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- changed -rtcwake parameter to be on & 15 sec by default,
to disable rtcwake use: "-rtcwake off"
- changed behavior of -o: renames HTML file on rerun, subdir on new run
- changed execution_misalignment error to missing_function_name
- add sysinfo to logs and timeline via a custom dmidecode call
it supplants dmidecode tool when used as a library call
- add -sysinfo command, displays dmidecode values and cpu/mem info
- set trace buffer size to lesser of memtotal/2 or 2GB when using callgraph
- add support for /sys/power/mem_sleep. if mem_sleep found:
mem-shallow=standby, mem-s2idle=freeze, mem-deep=mem
- remove redundant javascript
- cosmetic changes to HTML layout
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull perf fixes from Ingo Molnar:
"Two hw-enablement patches, two race fixes, three fixes for regressions
of semantics, plus a number of tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add proper condition to run sched_task callbacks
perf/core: Fix locking for children siblings group read
perf/core: Fix scheduling regression of pinned groups
perf/x86/intel: Fix debug_store reset field for freq events
perf/x86/intel: Add Goldmont Plus CPU PMU support
perf/x86/intel: Enable C-state residency events for Apollo Lake
perf symbols: Accept zero as the kernel base address
Revert "perf/core: Drop kernel samples even though :u is specified"
perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target
perf evsel: State in the default event name if attr.exclude_kernel is set
perf evsel: Fix attr.exclude_kernel setting for default cycles:p
In fixing the --show-total-period option it was noticed that the value
of sample->period was being overwritten, fix it.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: fd36f3dd79 ("perf hist: Pass struct sample to __hists__add_entry()")
Link: http://lkml.kernel.org/r/1500500215-16646-1-git-send-email-treeze.taeung@gmail.com
[ split from a larger patch, added the Fixes tag ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll use it soon, when fixing --show-total-period.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1500500215-16646-1-git-send-email-treeze.taeung@gmail.com
[ split from a larger patch, do the math in __symbol__inc_addr_samples() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pave the way to use perf_sample fields in the annotate code, storing
sample->period in sym_hist->addr->period and its sum in
sym_hist->period.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1500500215-16646-1-git-send-email-treeze.taeung@gmail.com
[ split and adjusted from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make it more clear that it is the sum of all the nr_samples fields in the
addr[] entries, i.e.:
sym_hist->nr_samples = sum(sym_hist->addr[0 .. symbol__size(sym)]->nr_samples)
Committer notes:
Taeung had renamed it to total_samples, but using nr_samples, as in the
added explanation above, looks clearer and establishes the direct
connection, making clear it is about the _number_ of samples.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1500500211-16599-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
struct sym_hist has addr[] but it should have not only number of samples
but also the sample period. So use new struct symhist_entry to pave the
way to have that.
Committer notes:
This initial patch will only introduce the struct sym_hist_entry and use
only the nr_samples member, which makes the code clearer and paves the
way to save the period as well.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1500500205-16553-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull networking fixes from David Miller:
1) BPF verifier signed/unsigned value tracking fix, from Daniel
Borkmann, Edward Cree, and Josef Bacik.
2) Fix memory allocation length when setting up calls to
->ndo_set_mac_address, from Cong Wang.
3) Add a new cxgb4 device ID, from Ganesh Goudar.
4) Fix FIB refcount handling, we have to set it's initial value before
the configure callback (which can bump it). From David Ahern.
5) Fix double-free in qcom/emac driver, from Timur Tabi.
6) A bunch of gcc-7 string format overflow warning fixes from Arnd
Bergmann.
7) Fix link level headroom tests in ip_do_fragment(), from Vasily
Averin.
8) Fix chunk walking in SCTP when iterating over error and parameter
headers. From Alexander Potapenko.
9) TCP BBR congestion control fixes from Neal Cardwell.
10) Fix SKB fragment handling in bcmgenet driver, from Doug Berger.
11) BPF_CGROUP_RUN_PROG_SOCK_OPS needs to check for null __sk, from Cong
Wang.
12) xmit_recursion in ppp driver needs to be per-device not per-cpu,
from Gao Feng.
13) Cannot release skb->dst in UDP if IP options processing needs it.
From Paolo Abeni.
14) Some netdev ioctl ifr_name[] NULL termination fixes. From Alexander
Levin and myself.
15) Revert some rtnetlink notification changes that are causing
regressions, from David Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
net: bonding: Fix transmit load balancing in balance-alb mode
rds: Make sure updates to cp_send_gen can be observed
net: ethernet: ti: cpsw: Push the request_irq function to the end of probe
ipv4: initialize fib_trie prior to register_netdev_notifier call.
rtnetlink: allocate more memory for dev_set_mac_address()
net: dsa: b53: Add missing ARL entries for BCM53125
bpf: more tests for mixed signed and unsigned bounds checks
bpf: add test for mixed signed and unsigned bounds checks
bpf: fix up test cases with mixed signed/unsigned bounds
bpf: allow to specify log level and reduce it for test_verifier
bpf: fix mixed signed/unsigned derived min/max value bounds
ipv6: avoid overflow of offset in ip6_find_1stfragopt
net: tehuti: don't process data if it has not been copied from userspace
Revert "rtnetlink: Do not generate notifications for CHANGEADDR event"
net: dsa: mv88e6xxx: Enable CMODE config support for 6390X
dt-binding: ptp: Add SoC compatibility strings for dte ptp clock
NET: dwmac: Make dwmac reset unconditional
net: Zero terminate ifr_name in dev_ifname().
wireless: wext: terminate ifr name coming from userspace
netfilter: fix netfilter_net_init() return
...
Add a couple of more test cases to BPF selftests that are related
to mixed signed and unsigned checks.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
These failed due to a bug in verifier bounds handling.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the few existing test cases that used mixed signed/unsigned
bounds and switch them only to one flavor. Reason why we need this
is that proper boundaries cannot be derived from mixed tests.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the test_verifier case, it's quite hard to parse log level 2 to
figure out what's causing an issue when used to log level 1. We do
want to use bpf_verify_program() in order to simulate some of the
tests with strict alignment. So just add an argument to pass the level
and put it to 1 for test_verifier.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Getting support for "on", "off" introduced in a81a5a17d4 ("lib: add
"on"/"off" support to kstrtobool") and making it check for NULL,
introduced in ef95159907 ("lib: move strtobool() to kstrtobool()").
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/n/tip-mu8ghin4rklacmmubzwv8td7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replacing prefixcmp(), same purpose, inverted result, so standardize on
the kernel variant, to reduce silly differences among tools/ and the
kernel sources, making it easier for people to work in both codebases.
And then doing:
if (strstarts(option, "no-"))
Looks clearer than doing:
if (!prefixcmp(option, "no-"))
To figure out if option starts witn "no-".
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kaei42gi7lpa8subwtv7eug8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoiding a loop, so now its quite convenient to ssh to a machine and
then simply do:
# perf trace
To trace all syscalls without causing a loop.
This was possible using --filter-pids, i.e. once you noticed the loop,
get the sshd pid and add it to --filter-pids, restarting the 'perf
trace'.
Now to figure out how to do that in a X terminal, the other common
scenario, which is way more involved, as there are multiple processes
communicating to process terminal activity...
Using --filter-pids + '-e \!syscall,names,you,dont,need' may be a good
approximation when having to do syswide tracing on your workstation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-68rjeao9wnpylla41htk7xps@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No change in functionality, just to make clearer that what we want when
filtering the tracer pid in a system wide tracing session is to avoid a
feedback loop.
This also paves the way for a more interesting loop avoidance algorithm,
one that tries to figure out if we are in a ssh session, xterm, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5fcttc5kdjkcyp9404ezkuy9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we make sure we have recent enough defines for things
such as 'perf trace' system call argument beautifiers.
For instance, the 'clone' syscall argument 'flag' needs to use
CLONE_NEWCGROUP, and that is not available in RHEL7.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-81sln0ng4a2lcxrth14vcov4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For tracepointless syscalls, like clone, otherwise get them from the
tracepoint's /format file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ml5qvv1w5k96ghwhxpzzsmm3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we don't have syscalls:sys_{enter,exit}_NAME, we had to resort to
dumping all the 6 syscall arguments, fix it by providing that info for
such syscalls, like 'clone'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dfq1jtrxj8dqvqoeqqpr3slu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All callers now can use syscall__arg_val(arg, idx), be it to iterate
thru the syscall arguments while taking into account alignment, or to
get values for other arguments that affect how the current argument
should be formatted (think of fcntl's 'cmd' and 'arg' arguments).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wm5b156d8kro1r4y3b33eyta@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously we only used the syscall_fmt when we had sc->tp_format set,
i.e. when we found the (enter, exit) pair in tracefs/events/syscalls/.
But we really only need to use what is in sc->arg_fmt to apply the arg
beautifiers to the syscall argument values, so do it.
With this we will be able to provide formatters to the "clone" syscall,
which doesn't have entries in tracefs/events/syscalls/.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-y41nl41jrayjo5ucnde2peix@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At least "clone" doesn't have (enter, exit) entries tracefs/events/syscalls/,
but we can provide a syscall_fmt and use it instead, as will be done for
"clone" in the next cset.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-o12kejgcxddyovn2hlg4gbim@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just suppress them, not used by the kernel.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-atpt07y2x9a8ttlwja94ow3j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An earlier kernel patch allowed enabling PT and LBR at the same time on
Goldmont.
commit ccbebba4c6 ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity
if the core supports it")
However, users still cannot use Intel PT and LBRs simultaneously. $
sudo perf record -e cycles,intel_pt//u -b -- sleep 1 Error: PMU
Hardware doesn't support sampling/overflow-interrupts.
PT implicitly adds dummy event in perf tool. dummy event is software
event which doesn't support LBR.
Always setting no branch for dummy event in Intel PT.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170630141656.1626-2-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The reason of introducing the tracking event (a dummy software event) is
to collect side-band information. Additional sampling is wasteful.
no_aux_samples should be set for tracking event.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170630141656.1626-1-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix the debug print statements in these tests where they reference
si_codes and in particular __SI_FAULT. __SI_FAULT is a kernel
internal value and should never be seen by userspace.
While I am in there also fix si_code_str. si_codes are an enumeration
there are not a bitmap so == and not & is the apropriate operation to
test for an si_code.
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 5f23f6d082 ("x86/pkeys: Add self-tests")
Fixes: e754aedc26 ("x86/mpx, selftests: Add MPX self test")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Show branch type in callchain entry. The branch type is printed
with other LBR information (such as cycles/abort/...).
For example:
perf record -g -j any,save_type
perf report --branch-history --stdio --no-children
38.50% div.c:45 [.] main div
|
---main div.c:42 (RET CROSS_2M cycles:2)
compute_flag div.c:28 (cycles:2)
compute_flag div.c:27 (RET CROSS_2M cycles:1)
rand rand.c:28 (cycles:1)
rand rand.c:28 (RET CROSS_2M cycles:1)
__random random.c:298 (cycles:1)
__random random.c:297 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (RET CROSS_2M cycles:9)
Change log
v6: Remove the branch_type_str() since it's moved to branch.c.
v5: Rewrite the branch info print code in util/callchain.c.
v4: Comparing to previous version, the major changes are:
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500379995-6449-8-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show the branch type statistics at the end of perf report --stdio.
For example:
perf report --stdio
COND_FWD: 28.5%
COND_BWD: 9.4%
CROSS_4K: 0.7%
CROSS_2M: 14.1%
COND: 37.9%
UNCOND: 0.2%
IND: 6.7%
CALL: 26.5%
RET: 28.7%
SYSRET: 0.0%
The branch types are:
COND_FWD: conditional forward
COND_BWD: conditional backward
COND: conditional branch
UNCOND: unconditional branch
IND: indirect
CALL: function call
IND_CALL: indirect function call
RET: function return
SYSCALL: syscall
SYSRET: syscall return
COND_CALL: conditional function call
COND_RET: conditional function return
CROSS_4K and CROSS_2M:
They are the metrics checking for branches cross 4K or 2MB pages.
It's an approximate computing. We don't know if the area is 4K or
2MB, so always compute both.
To make the output simple, if a branch crosses 2M area, CROSS_4K
will not be incremented.
Change log
v7: Since the common branch type definitions are changed, some
tags/strings are updated accordingly.
v6: Remove branch_type_stat_display() since it's moved to branch.c.
v5: Remove the unnecessary sort__mode checking in
hist_iter__branch_callback().
v4: Comparing to previous version, the major changes are:
Add the computing of JCC forward/JCC backward and cross page checking
by using the from and to addresses.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500379995-6449-7-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create new util/branch.c and util/branch.h to contain the common branch
functions. Such as:
branch_type_count(): Count the numbers of branch types
branch_type_name() : Return the name of branch type
branch_type_stat_display(): Display branch type statistics info
branch_type_str(): Construct the branch type string.
The branch type is saved in branch_flags.
Change log:
v8: Change PERF_BR_NONE to PERF_BR_UNKNOWN.
v7: Since the common branch type name is changed (e.g. JCC->COND),
this patch is performed the modification accordingly.
v6: Move that multiline conditional code inside {} brackets.
Move branch_type_stat_display() from builtin-report.c to
branch.c.
Move branch_type_str() from callchain.c to branch.c.
v5: It's a new patch in v5 patch series.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500379995-6449-6-git-send-email-yao.jin@linux.intel.com
[ Don't use 'index' and 'stat' as names for variables, it shadows global decls in older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch info such as predicted/cycles/... are printed at the
callchain entries.
For example: perf report --branch-history --no-children --stdio
--1.07%--main div.c:39 (predicted:52.4% cycles:1 iterations:17)
main div.c:44 (predicted:52.4% cycles:1)
main div.c:42 (cycles:2)
compute_flag div.c:28 (cycles:2)
compute_flag div.c:27 (cycles:1)
rand rand.c:28 (cycles:1)
rand rand.c:28 (cycles:1)
__random random.c:298 (cycles:1)
__random random.c:297 (cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (cycles:1)
But the current code is difficult to maintain and extend. This patch
refactors the code for easy maintenance.
Change log:
v6: 1. Put the multiline condition code into {} brackets in
counts_str_build()
2. Keep the original display order, that is:
predicted, abort, cycles, iterations
v5: It's a new patch in v5 patch series.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500379995-6449-5-git-send-email-yao.jin@linux.intel.com
[ Don't use 'index' as a name for a variable, it shadows a globa decl in older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The option indicates the kernel to save branch type during sampling.
One example:
perf record -g --branch-filter any,save_type <command>
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500379995-6449-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is often useful to know the branch types while analyzing branch data.
For example, a call is very different from a conditional branch.
Currently we have to look it up in binary while the binary may later not
be available and even the binary is available but user has to take some
time. It is very useful for user to check it directly in perf report.
Perf already has support for disassembling the branch instruction to get
the x86 branch type.
To keep consistent on kernel and userspace and make the classification
more common, the patch adds the common branch type classification
in perf_event.h.
The patch only defines a minimum but most common set of branch types.
PERF_BR_UNKNOWN : unknown
PERF_BR_COND ：conditional
PERF_BR_UNCOND : unconditional
PERF_BR_IND : indirect
PERF_BR_CALL : function call
PERF_BR_IND_CALL : indirect function call
PERF_BR_RET : function return
PERF_BR_SYSCALL : syscall
PERF_BR_SYSRET : syscall return
PERF_BR_COND_CALL : conditional function call
PERF_BR_COND_RET : conditional function return
The patch also adds a new field type (4 bits) in perf_branch_entry
to record the branch type.
Since the disassembling of branch instruction needs some overhead,
a new PERF_SAMPLE_BRANCH_TYPE_SAVE is introduced to indicate if it
needs to disassemble the branch instruction and record the branch
type.
Change log:
v10: Not changed.
v9: Not changed.
v8: Change PERF_BR_NONE to PERF_BR_UNKNOWN.
No other change.
v7: Just keep the most common branch types.
Others are removed.
v6: Not changed.
v5: Not changed. The v5 patch series just change the userspace.
v4: Comparing to previous version, the major changes are:
1. Remove the PERF_BR_JCC_FWD/PERF_BR_JCC_BWD, they will be
computed later in userspace.
2. Remove the "cross" field in perf_branch_entry. The cross page
computing will be done later in userspace.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1500379995-6449-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add header record types to pipe-mode, reusing the functions
used in file-mode and leveraging the new struct feat_fd.
For alignment, check that synthesized events don't exceed
pagesize.
Add the perf_event__synthesize_feature event call back to
process the new header records.
Before this patch:
$ perf record -o - -e cycles sleep 1 | perf report --stdio --header
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
...
After this patch:
$ perf record -o - -e cycles sleep 1 | perf report --stdio --header
# ========
# captured on: Mon May 22 16:33:43 2017
# ========
#
# hostname : my_hostname
# os release : 4.11.0-dbx-up_perf
# perf version : 4.11.rc6.g6277c80
# arch : x86_64
# nrcpus online : 72
# nrcpus avail : 72
# cpudesc : Intel(R) Xeon(R) CPU E5-2696 v3 @ 2.30GHz
# cpuid : GenuineIntel,6,63,2
# total memory : 263457192 kB
# cmdline : /root/perf record -o - -e cycles -c 100000 sleep 1
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: intel_bts = 6, uncore_imc_4 = 22, uncore_sbox_1 = 47, uncore_cbox_5 = 33, uncore_ha_0 = 16, uncore_cbox
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
...
Support added for the subcommands: report, inject, annotate and script.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-16-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add show_feat_hdr to control level of printed information of feature
headers.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-15-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are three FEAT_OP* macros:
- FEAT_OPA: for features without process record.
- FEAT_OPP: for features with process record.
- FEAT_OPF: like FEAT_OPP but to show only if show_full_info flags
is set.
To add pipe-mode headers we need yet another variation of the macros
(one to specify whether a feature generates an auxiliar record).
Instead, we redefine macros so that:
- show_full_info is specified as an argument (to remove the
FEAT_OPF variation) and,
- it always sets "process" handler (to remove the FEAT_OPA variation).
Individual process handlers can be NULLed individually.
This allows to define two variations only:
- FEAT_OPR: synthesizes auxiliar event record.
- FEAT_OPN: doesn't synthesize an auxiliar event record.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-14-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend struct feat_fd to use a temporal buffer in pipe-mode, instead of
perf.data's file descriptor.
The header features build_id and aux_trace already have logic to print
in file-mode that heavily rely on lseek the file. For now, leave such
features inactive in pipe-mode and print a warning if their functions
are called in pipe-mode.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-13-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In pipe-mode, we will operate over a buffer instead of a file descriptor
but write_pmu_mappings uses lseek to move over the perf.data file.
Refactor write_pmu_mappings to avoid the usage of lseek and allow
reusing the same logic in pipe-mode (next patch).
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-12-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As preparation for using header records in-pipe mode, replace int fd
with struct feat_fd ff in read functions for all header record types.
This patch does not change behavior.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-11-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
struct perf_file_section is used in process_##_feat as container for
size and offset in the file descriptor. These attributes are meaninful
in pipe-mode but struct perf_file_section is not.
Add offset and size variables to struct feat_fd to store
perf_file_section's values in file-mode. Later on, the same variables
can be reused for pipe-mode.
This patch does not change behavior.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-10-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As preparation for using header records in pipe-mode, replace int fd
with struct feat_fd ff in process functions for all header record types.
This patch does not change behavior.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-9-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As preparation for using header records in pipe mode, replace int fd
with struct feat_fd ff in print functions for all header record types.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-8-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce struct feat_fd. This patch uses it as a wrapper around fd in
write_* functions for feature headers. Next patches will extend its
functionality to other feature header functions.
This patch does not change behavior.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-7-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that writen takes a const buffer, use it in do_write instead of
duplicating its functionality.
Export do_write to use it consistently in header.c and build_id.c .
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-6-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make buf in helper function "writen" constant to simplify the life of
its callers.
This requires to hack a cast of buf prior to passing it to "ion" which
is simpler than the alternative of reworking the "ion" function to
provide a read and a write paths, the latter with constant buf argument.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-5-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not proceed if write_padded() error failed.
Also, add comments to remind that the return value of write_* functions
in util/header.c is an errno code and not the number of bytes written.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-4-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Simplify code by adding a macro to handle the common case of processing
header features that are a simple string.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-3-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Most callers of readn() in perf header read either a 32 or a 64 bits
number, error check it and swap it, if necessary.
Create do_read_u32 and do_read_u64 to simplify these use cases.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-2-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently perf supports a mode to query inline stack. It works well for
finding user space inline functions but it doesn't work for kernel ones,
due to some unnecessary check.
This patch removes these unnecessary checks. Now kernel inline functions
can be reported.
For example:
perf report --inline -g func --stdio
|--46.19%--do_huge_pmd_anonymous_page
| do_huge_pmd_anonymous_page (inline)
| __do_huge_pmd_anonymous_page (inline)
| __SetPageUptodate (inline)
| __set_bit (inline)
The result is compared with the output of addr2line. They match.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500409892-15904-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing syscall_fmt::err_msg and instead always formatting negative
returns as errno values.
With this we can remove a lot of entries that have no special handling
besides the ones we can do by looking at the tracefs format files, i.e.
the types for the fields (e.g. pid_t), well known names (e.g. fd).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rg9u7a3qqdnzo37d212vnz2o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf trace' tool is suppressing args set to zero, with the
exception of string tables (strarrays), which are kinda like enums, i.e.
we have maps to go from numbers to strings.
But the 'cmd' fcntl arg requires more specialized treatment, as its
value will regulate if the next fcntl syscall arg, 'arg', should be
ignored (not used) and also how to format the syscall return (fd, file
flags, etc), so add a 'show_zero" bool to struct syscall_arg_fmt, to
regulate this more explicitely.
Will be used in a following patch with fcntl, here is just the
mechanism.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-all738jctxets8ffyizp5lzo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of having syscall_fmt.{arg_scnprintf,arg_parm}, introduce
struct syscall_arg_fmt and have these two, paving the way for more
state to change the formatting algorithms.
For instance, in the 'fcntl' 'cmd' case it is better not to suppress
it when being zero, showing instead its name "DUPFD".
We had that in an ad-hoc way just for strarrays, but with more involved
cases like fcntl, that can't be done with just a strarray, we'll need
a ".show_zero" arg in the 'cmd' syscall_arg_fmt.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ch06o2j72zbjx5xww4qp67au@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One more looking prettier.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ytr7idkese8sjtvn5g60130e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like will be done with fcntl(fd, F_GETLEASE, F_RDLCK|F_WRLCK|F_UNLCK)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3p11bgirtntjfmbixfkz8i2m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some of the stat events are quite rare to find on common machines (like
front end cycles).
Adding an 'optional' term to mark such events in attr tests. Event
marked as optional will not fail the test case if it's not found in
results.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>From following commit:
commit 4979d0c7d0 ("perf stat record: Add record command")
we started to assign PERF_SAMPLE_IDENTIFIER to sample_type.
Fixing the attr stat tests accordingly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have a test to detect to highest precise possible, so test can't just
predict precise_ip value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The final period can differ from what user specifies on command line due
to the perf_event_max_sample_rate sysctl setup.
Thus we can't predixt the sample_period value any more.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The stat command creates all events disabled and enables them either
manualy or via the enable_on_exec bit.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The record command now properly returns the status of the tracee if
there's any. We need to properly set the expected return value of the
tracee in the attr tests.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following commit:
commit 509051ea84 ("perf record: Rename --no-delay to --no-buffering")
removed '-D' option and renamed --no-delay into --no-buffering.
Fixing that in the attr tests.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Fixes: 509051ea84 ("perf record: Rename --no-delay to --no-buffering")
Link: http://lkml.kernel.org/r/20170703145030.12903-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following commit:
commit 5c0cf22477 ("perf record: Store data mmaps for dwarf unwind")
have enabled address sampling for dwarf unwind, we need to reflect that
in this test by adding ADDR sample_type and enabling mmap_data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's an event open fallback which set exclude_kernel=1 in case use
does not have enough privileges. Adding both 0|1 for this attribute,
because we don't know what value it is.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The data_equal name fits better to the return value of the function.
It's true when the data is equal.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Making compare_data global, so it could be used outside
the Test class scope to compare command results.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We create many test events before the real ones just to test specific
features. But there's no way for attr tests to separate those test
events from those it needs to check.
Adding 'ready' call from the events open interface to trigger/start
events collection for attr test.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not mess up our temp space with files we don't
need - failed event open attempts.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It can return NULL, in which case we should bail out and remove the
directory created with mkdtemp(), which is stored in the "__tempdir"
variable, not in "tempdir".
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 8e5dc84835 ("perf test: Add a test case for SDT event")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the user doesn't specify an event with -e/--event, 'perf record'
will use as a default the "cycles" event with the highest level of
precision in perf_event_attr.precise_ip, but --no-samples, if present,
is incompatible with precise_ip != 0, so use the newly introduced
__perf_event__add_default(precise = false) to fix that:
Before:
# perf record -n usleep 1
Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate.
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cycles:ppp).
/bin/dmesg may provide additional information.
No CONFIG_PERF_EVENTS=y kernel support configured?
#
After:
# perf record -n usleep 1
Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.018 MB perf.data ]
[root@jouet /]# perf evlist -v
cycles: size: 112, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
[root@jouet /]#
Reported-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-q991fw6s6rhjvrd5ye4t7qom@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are cases where we want to leave attr.precise_ip as zero, such
as when using 'perf record --no-samples', where this would make the
kernel return -EINVAL.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-0u2m2a8rqw781r6m8svqyne8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are cases where we want to leave attr.precise_ip as zero, such
as when using 'perf record --no-samples', where this would make the
kernel return -EINVAL.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4zq1udecxa51gsapyfwej5fj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a stripped binary is placed in the cache, the user is in a situation
where there's a cached elf file present, but it doesn't have any symtab
to use for name resolution. Grab the debuginfo for binaries that don't
end in .ko. This yields a better chance of resolving symbols from older
traces.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-7-git-send-email-kjlx@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Teach buildid-cache how to add, remove, and update binary objects from
other mount namespaces. Allow probe events tracing binaries in
different namespaces to add their objects to the probe and build-id
caches too. As a handy side effect, this also lets us access SDT probes
in binaries from alternate mount namespaces.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-5-git-send-email-kjlx@templeofstupid.com
[ Add util/namespaces.c to tools/perf/util/python-ext-sources, to fix the python binding 'perf test' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Teaches perf how to place a uprobe on a file that's in a different mount
namespace. The user must add the probe using the --target-ns argument
to perf probe. Once it has been placed, it may be recorded against
without further namespace-specific commands.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
[ PPC build fixed by Ravi: ]
Link: http://lkml.kernel.org/r/1500287542-6219-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
[ Fix !HAVE_DWARF_SUPPORT build ]
Link: http://lkml.kernel.org/r/1499305693-1599-4-git-send-email-kjlx@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a process is in a mountns and has symbols in /tmp/perf-<pid>.map,
look first in the namespace using the tgid for the pidns that the
process might be in. If the map isn't found there, try looking in the
mountns where perf is running, and use the tgid that's appropriate for
perf's pid namespace. If all else fails, use the original pid.
This allows us to locate a symbol map file in the mount namespace, if it
was generated there. However, we also try the tool's /tmp in case it's
there instead.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-3-git-send-email-kjlx@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Teach perf how to resolve symbols from binaries that are in a different
mount namespace from the tool. This allows perf to generate meaningful
stack traces even if the binary resides in a different mount namespace
from the tool.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-2-git-send-email-kjlx@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And provide an alternative implementation to keep perf building on older
distros as we're about to add initial support for namespaces.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bqdwijunhjlvps1ardykhw1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help us provide a simple setns() in older distros.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-o10a85kf6j7ig87ep6crab2k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In older distros we were not including our copies of unistd_{32,64}.h,
as we were relying on the system's asm/unistd.h, and a log time ago
the files to be included were asm-{x86_64,i386}/unistd.h.
Fix it by also carrying a copy of asm/unistd.h, that will be the same
as in modern distros and will allow us to provide missing __NR_setns,
for instance, in older distros.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-iwmgm0c4m1ynstktzmkjh8di@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By attaching the pid beautifier to the args in the F_SETOWN case and to
the syscall return on the F_GETOWN one.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ea1prtqvao87cdrishce7954@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that the beautifiers are being split into multiple source and object
files, we will need more of them exported, do it for the 'pid' one, will
be used to augment the return of some syscalls that may return a 'pid',
such as fcntl(fd, F_GETOWN).
Will also be used for fcntl(fd, F_SETOWN, pid).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7gr5nt9p5skp4i1w0ja1w272@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the existing 'fd' beautifier, now we can see the path for the just
dup'ed fd:
18031.338 ( 0.009 ms): gnome-terminal/2472 fcntl(fd: 55, cmd: DUPFD_CLOEXEC) = 56</memfd:gdk-wayland (deleted)>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-z0ggo126p2eobfwnjw9z16tw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that the beautifiers are being split into multiple source and object
files, we will need more of them exported, do it for the 'fd' one, will
be used to augment the return of some syscalls that may return an 'fd',
such as fcntl(fd, F_DUPFD).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-39sosu12hhywyunqf5s74ewf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need the current thread and the trace internal state so that we can
use the fd beautifier to augment syscall returns, so use struct
syscall_arg with some fields that make sense on returns (val, thread,
trace).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lqag8e86ybidrh5zpqne05ov@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now it will show 0 or CLOEXEC, the only !0 value returned by the kernel
for fcntl(fd, F_GETFD).
And for F_SETFD:
6870.267 ( 0.004 ms): make/29812 fcntl(fd: 7</home/acme/git/linux/tools/build/Build.include>, cmd: SETFD, arg: CLOEXEC) = 0
6873.805 ( 0.002 ms): make/29816 fcntl(fd: 6</home/acme/git/linux/tools/build/Makefile.build>, cmd: SETFD, arg: CLOEXEC) = 0
<SNIP>
77986.150 ( 0.006 ms): alsa-sink-ALC3/2042 fcntl(fd: 45</dev/snd/pcmC1D0p>, cmd: SETFD, arg: CLOEXEC) = 0
77986.271 ( 0.006 ms): alsa-sink-ALC3/2042 fcntl(fd: 23</dev/snd/controlC1>, cmd: SETFD, arg: CLOEXEC) = 0
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-sz9dob7t4zd6m65femazpaah@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
