Commit Graph

12205 Commits

Author SHA1 Message Date
Jiri Olsa
7e304557ea perf annotate: Add samples into struct annotation_line
Add samples array into struct annotation_line to hold the annotation
data. The data is populated in the following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:40:00 -03:00
Jiri Olsa
f8eb37bd7c perf annotate: Add annotated_source__purge function
Mov disasm__purge() to annotated_source__purge() to make it work over a
generic struct annotation_line.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:40:00 -03:00
Jiri Olsa
c835e1914c perf annotate: Add annotation_line__(new|delete) functions
Changing the way the annotation lines are allocated and adding
annotation_line__(new|delete) functions to deal with this.

Before the allocation schema was as follows:

  -----------------------------------------------------------
  struct disasm_line | struct annotation_line | private space
  -----------------------------------------------------------

Where the private space is used in TUI code to store computed
annotation data for events. The stdio code computes the data
on the fly.

The goal is to compute and store annotation line's data directly
in the struct annotation_line itself, so this patch changes the
line allocation schema as follows:

  ------------------------------------------------------------
  privsize space | struct disasm_line | struct annotation_line
  ------------------------------------------------------------

Moving struct annotation_line to the end, because in following
changes we will move here the non-fixed length event's data.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:39:59 -03:00
Jiri Olsa
5b12adc849 perf annotate: Move rb_node to struct annotation_line
Move rb_node to struct annotation_line to make struct annotation_line
the rb tree node for sorted lines used in both stdio and TUI code.

This way we can unite the sorted lines lines codes for both TUI and
stdio in the following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:39:59 -03:00
Jiri Olsa
82b9d7ff09 perf annotate: Add annotation_line__add function
Rename disasm__add() into annotation_line__add() to make it work over a
generic struct annotation_line.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:39:59 -03:00
Jiri Olsa
c4c724364d perf annotate: Add annotation_line__next function
Rename disasm__get_next_ip_line() to annotation_line__next() to make it
work over a generic struct annotation_line.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:39:59 -03:00
Jiri Olsa
d03a686ea6 perf annotate: Add evsel into struct annotation_line_args
Add evsel into struct annotate_args to reduce the number of arguments
that need to travel all the way to line allocation.

This change also allow us to move the arch name initialization under
symbol__annotate function.

Link: http://lkml.kernel.org/n/tip-a9ok53rrgt1s5e8uglyvy6qt@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:39:59 -03:00
Jiri Olsa
4748834f96 perf annotate: Add offset/line/line_nr into struct annotate_args
Add offset/line/line_nr into struct annotate_args to reduce the number
of arguments that need to travel all the way to line allocation.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:39:58 -03:00
Jiri Olsa
1a04db70dc perf annotate: Add map into struct annotate_args
Add map into struct annotate_args to reduce the number of arguments
that need to travel all the way to line allocation.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:39:58 -03:00
Jiri Olsa
24fe7b8893 perf annotate: Add arch into struct annotate_args
Add arch into struct annotate_args to reduce the number of arguments
that need to travel all the way to line allocation.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:39:58 -03:00
Jiri Olsa
ea07c5aaed perf annotate: Add struct annotate_args
Adding struct annotate_args to reduce the number of arguments, that need
to travel all the way to line allocation. This makes the code easier to
read and ease up the changes for following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:39:58 -03:00
Jiri Olsa
c34df25b40 perf annotate: Add symbol__annotate function
Add symbol__annotate function to have generic annotation function to be
called for all annotation sources.

It calls the generic annotation init and then the specific annotation
data retrieval function.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:39:58 -03:00
Jiri Olsa
37236d5e0b perf annotate: Move ipc/cycles into annotation_line struct
Move ipc/cycles into annotation_line struct to be used as generic
members for any annotation source.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:39:58 -03:00
Jiri Olsa
d5490b9647 perf annotate: Move line/offset into annotation_line struct
Move the line/line_nr/offset menbers to the annotation_line struct to be
used as generic members for any annotation source.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:39:57 -03:00
Jiri Olsa
a17c4ca0dd perf annotate: Add annotation_line struct
In order to make the annotation support generic, addadding 'struct
annotation_line', which will hold generic data common to annotation
sources (such as the one for python scripts, coming on upcoming
patches).

Having this, we can add different annotation line support other than
objdump disasm.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:39:57 -03:00
Arnaldo Carvalho de Melo
d3dbf43c56 perf record: Generate PERF_RECORD_{MMAP,COMM,EXEC} with --delay
When we use an initial delay, e.g.: 'perf record --delay 1000', we do not
enable the events until that delay has passed after we started the workload,
including the tracking event, i.e. the one for which we have attr.mmap, etc,
enabled to ask the kernel to generate the PERF_RECORD_{MMAP,COMM,EXEC} metadata
events that will then allow us to resolve addresses in samples to the map, dso
and symbol. There will be a shadow that even synthesizing samples won't cover,
i.e. the workload that we start and other processes forking while we
wait for the initial delay to expire.

So use a dummy event to be the tracking one and make it be enabled on exec.

Before:

  # perf record --delay 1000 stress --cpu 1 --timeout 5
  stress: info: [9029] dispatching hogs: 1 cpu, 0 io, 0 vm, 0 hdd
  stress: info: [9029] successful run completed in 5s
  [ perf record: Woken up 3 times to write data ]
  [ perf record: Captured and wrote 0.624 MB perf.data (15908 samples) ]
  # perf script | head
      :9031 9031 32001.826888:       1 cycles:ppp: ffffffff831aa30d event_function (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826893:       1 cycles:ppp: ffffffff8300d1a0 intel_bts_enable_local (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826895:       7 cycles:ppp: ffffffff83023870 sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826897:     103 cycles:ppp: ffffffff8300c331 intel_pmu_handle_irq (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826899:    1615 cycles:ppp: ffffffff830231f8 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826902:   26724 cycles:ppp: ffffffff8384c6a7 native_irq_return_iret (/lib/modules/4.14.0-rc6+/build/vmlinux)
      :9031 9031 32001.826913:  329739 cycles:ppp:     7fb2a5410932 [unknown] ([unknown])
      :9031 9031 32001.827033: 1225451 cycles:ppp:     7fb2a5410930 [unknown] ([unknown])
      :9031 9031 32001.827474: 1391725 cycles:ppp:     7fb2a5410930 [unknown] ([unknown])
      :9031 9031 32001.827978: 1233697 cycles:ppp:     7fb2a5410928 [unknown] ([unknown])
  #

After:

  # perf record --delay 1000 stress --cpu 1 --timeout 5
  stress: info: [9741] dispatching hogs: 1 cpu, 0 io, 0 vm, 0 hdd
  stress: info: [9741] successful run completed in 5s
  [ perf record: Woken up 3 times to write data ]
  [ perf record: Captured and wrote 0.751 MB perf.data (15976 samples) ]
  # perf script | head
     stress  9742 32110.959106:          1 cycles:ppp:  ffffffff831b26f6 __perf_event_task_sched_in (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959110:       1 cycles:ppp: ffffffff8300c2e9 intel_pmu_handle_irq (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959112:       7 cycles:ppp: ffffffff830231e0 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959115:     101 cycles:ppp: ffffffff83023870 sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959117:    1533 cycles:ppp: ffffffff830231f8 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959119:   23992 cycles:ppp: ffffffff831b0900 ctx_sched_in (/lib/modules/4.14.0-rc6+/build/vmlinux)
     stress 9742 32110.959129:  329406 cycles:ppp:     7f4b1b661930 __random_r (/usr/lib64/libc-2.25.so)
     stress 9742 32110.959249: 1288322 cycles:ppp:     5566e1e7cbc9 hogcpu (/usr/bin/stress)
     stress 9742 32110.959712: 1464046 cycles:ppp:     7f4b1b66179e __random (/usr/lib64/libc-2.25.so)
     stress 9742 32110.960241: 1266918 cycles:ppp:     7f4b1b66195b __random_r (/usr/lib64/libc-2.25.so)
  #

Reported-by: Bram Stolk <b.stolk@gmail.com>
Tested-by: Bram Stolk <b.stolk@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 6619a53ef7 ("perf record: Add --initial-delay option")
Link: http://lkml.kernel.org/n/tip-nrdfchshqxf7diszhxcecqb9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:39:57 -03:00
Arnaldo Carvalho de Melo
640d5175a6 perf evlist: Set the correct idx when adding dummy events
The evsel->idx field is used mainly to access the right bucket in
per-event arrays such as the annotation ones, but also to set
evsel->tracking, that in turn will decide what of the events will ask
for PERF_RECORD_{MMAP,COMM,EXEC} to be generated, i.e. which
perf_event_attr will have its mmap, etc fields set.

When we were adding the "dummy" event using perf_evlist__add_dummy() we
were not setting it correctly, which could result in multiple tracking
events.

Now that I'll try using a dummy event to be the tracking one when using
'perf record --delay', i.e. when we process the --delay
setting we may already have the evlist set up, like with:

  perf record -e cycles,instructions --delay 1000 ./workload

We will need to add a "dummy" event, then reset evsel->tracking for the
first event, "cycles", and set it instead to the dummy one, and also
setting its attr.enable_on_exec, so that we get the PERF_RECORD_MMAP,
etc metadata events while waiting to enable the explicitely requested
events, so lets get this straight and set the right evsel->idx.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bram Stolk <b.stolk@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-nrdfchshqxf7diszhxcecqb9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:39:57 -03:00
Arnaldo Carvalho de Melo
7862edc419 Merge remote-tracking branch 'torvalds/master' into perf/core
To pick up fixes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-13 09:39:12 -03:00
Ingo Molnar
505ee76761 tooling/headers: Sync the tools/include/uapi/drm/i915_drm.h UAPI header
Last minute upstream update to one of the UAPI headers - sync it with tooling,
to address this warning:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-11 09:08:43 +01:00
Ingo Molnar
529b3ca832 Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf tooling fixes from Arnaldo Carvalho de Melo.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-11 09:03:59 +01:00
Andrei Vagin
33974a414c perf trace: Call machine__exit() at exit
Otherwise 'perf trace' leaves a temporary file /tmp/perf-vdso.so-XXXXXX.

  $ perf trace -o log true
  $ ls -l /tmp/perf-vdso.*
  -rw------- 1 root root 8192 Nov  8 03:08 /tmp/perf-vdso.so-5bCpD0

Signed-off-by: Andrei Vagin <avagin@openvz.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vasily Averin <vvs@virtuozzo.com>
Link: http://lkml.kernel.org/r/20171108002246.8924-1-avagin@openvz.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-09 10:17:32 -03:00
Jiri Olsa
a271bfaf30 perf tools: Fix eBPF event specification parsing
Looks like I've reached the new level of stupidity, adding missing braces.

Committer testing:

Given the following eBPF C filter, that will add a record when it
returns true, i.e. when the tv_nsec variable is > 2000ns, should be
built and installed via sys_bpf(), but fails to do so before this patch:

  # cat filter.c
  #include <uapi/linux/bpf.h>
  #define SEC(NAME) __attribute__((section(NAME), used))

  SEC("func=hrtimer_nanosleep rqtp->tv_nsec")
  int func(void *ctx, int err, long nsec)
  {
	  return nsec > 1000;
  }
  char _license[] SEC("license") = "GPL";
  int _version SEC("version") = LINUX_VERSION_CODE;
  #

  # perf trace -e nanosleep,filter.c usleep 1
  invalid or unsupported event: 'filter.c'
  Run 'perf list' for a list of valid events

   Usage: perf trace [<options>] [<command>]
      or: perf trace [<options>] -- <command> [<options>]
      or: perf trace record [<options>] [<command>]
      or: perf trace record [<options>] -- <command> [<options>]

      -e, --event <event>   event/syscall selector. use 'perf list' to list available events
  #

And works again after it is applied, the nothing is inserted when the co

  # perf trace -e *sleep,filter.c usleep 1
     0.000 ( 0.066 ms): usleep/23994 nanosleep(rqtp: 0x7ffead94a0d0) = 0
  # perf trace -e *sleep,filter.c usleep 2
     0.000 ( 0.008 ms): usleep/24378 nanosleep(rqtp: 0x7fffa021ba50) ...
     0.008 (         ): perf_bpf_probe:func:(ffffffffb410cb30) tv_nsec=2000)
     0.000 ( 0.066 ms): usleep/24378  ... [continued]: nanosleep()) = 0
  #

The intent of 9445464bb8 is kept:

  # perf stat -e 'cpu/uops_executed.core,krava/'  true
  event syntax error: '..cuted.core,krava/'
                                    \___ unknown term

  valid terms: cmask,pc,event,edge,in_tx,any,ldlat,inv,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period
  Run 'perf list' for a list of valid events

   Usage: perf stat [<options>] [<command>]

      -e, --event <event>   event selector. use 'perf list' to list available events
  #
  # perf stat -e 'cpu/uops_executed.core,period=1/'  true

   Performance counter stats for 'true':

           808,332      cpu/uops_executed.core,period=1/

       0.002997237 seconds time elapsed

  #

Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 9445464bb8 ("perf tools: Unwind properly location after REJECT")
Link: http://lkml.kernel.org/n/tip-diea0ihbwpxfw6938huv3whj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-09 10:10:58 -03:00
Jiri Olsa
b6af53b7d6 perf tools: Add "reject" option for parse-events.l
Arnaldo reported broken builds in some distros using a newer flex
release, 2.6.4, found in Alpine Linux 3.6 and Edge, with flex not
spotting the REJECT macro:

  CC       /tmp/build/perf/util/parse-events-flex.o
  util/parse-events.l: In function 'parse_events_lex':
  /tmp/build/perf/util/parse-events-flex.c:4734:16: error: \
  'reject_used_but_not_detected' undeclared (first use in this function)

It's happening because we put the REJECT under another USER_REJECT macro
in following commit:

  9445464bb8 perf tools: Unwind properly location after REJECT

Fortunately flex provides option for force it to use REJECT, adding it
to parse-events.l.

Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 9445464bb8 ("perf tools: Unwind properly location after REJECT")
Link: http://lkml.kernel.org/n/tip-7kdont984mw12ijk7rji6b8p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-09 10:09:03 -03:00
Ingo Molnar
15bcdc9477 Merge branch 'linus' into perf/core, to fix conflicts
Conflicts:
	tools/perf/arch/arm/annotate/instructions.c
	tools/perf/arch/arm64/annotate/instructions.c
	tools/perf/arch/powerpc/annotate/instructions.c
	tools/perf/arch/s390/annotate/instructions.c
	tools/perf/arch/x86/tests/intel-cqm.c
	tools/perf/ui/tui/progress.c
	tools/perf/util/zlib.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07 10:30:18 +01:00
Linus Torvalds
9d9cc4aa00 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Various fixes:

   - synchronize kernel and tooling headers

   - cgroup support fix

   - two tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools/headers: Synchronize kernel ABI headers
  perf/cgroup: Fix perf cgroup hierarchy support
  perf tools: Unwind properly location after REJECT
  perf symbols: Fix memory corruption because of zero length symbols
2017-11-05 11:44:39 -08:00
Ingo Molnar
fb7df12d64 tools/headers: Synchronize kernel ABI headers
After the SPDX license tags were added a number of tooling headers got out of
sync with their kernel variants, generating lots of build warnings.

Sync them:

 - tools/arch/x86/include/asm/disabled-features.h,
   tools/arch/x86/include/asm/required-features.h,
   tools/include/linux/hash.h:

     Remove the SPDX tag where the kernel version does not have it.

 - tools/include/asm-generic/bitops/__fls.h,
   tools/include/asm-generic/bitops/arch_hweight.h,
   tools/include/asm-generic/bitops/const_hweight.h,
   tools/include/asm-generic/bitops/fls.h,
   tools/include/asm-generic/bitops/fls64.h,
   tools/include/uapi/asm-generic/ioctls.h,
   tools/include/uapi/asm-generic/mman-common.h,
   tools/include/uapi/sound/asound.h,
   tools/include/uapi/linux/kvm.h,
   tools/include/uapi/linux/perf_event.h,
   tools/include/uapi/linux/sched.h,
   tools/include/uapi/linux/vhost.h,
   tools/include/uapi/sound/asound.h:

     Add the SPDX tag of the respective kernel header.

 - tools/include/uapi/linux/bpf_common.h,
   tools/include/uapi/linux/fcntl.h,
   tools/include/uapi/linux/hw_breakpoint.h,
   tools/include/uapi/linux/mman.h,
   tools/include/uapi/linux/stat.h,

     Change the tag to the kernel header version:

       -/* SPDX-License-Identifier: GPL-2.0 */
       +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */

Also sync other header details:

 - include/uapi/sound/asound.h:

     Fix pointless end of line whitespace noise the header grew in this cycle.

 - tools/arch/x86/lib/memcpy_64.S:

     Sync the code and add tools/include/asm/export.h with dummy wrappers
     to support building the kernel side code in a tooling header environment.

 - tools/include/uapi/asm-generic/mman.h,
   tools/include/uapi/linux/bpf.h:

     Sync other details that don't impact tooling's use of the ABIs.

Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-04 09:27:46 +01:00
Josh Poimboeuf
da0db32bbe objtool: Resync objtool's instruction decoder source code copy with the kernel's latest version
This fixes the following warning:

  warning: objtool: x86 instruction decoder differs from kernel

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/013315a808ccf5580abc293808827c8e2b5e1354.1509719152.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-04 08:54:06 +01:00
Ingo Molnar
294cbd05e3 Merge branch 'linus' into perf/urgent, to pick up dependent commits
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-03 12:30:12 +01:00
Linus Torvalds
ead751507d License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
 makes it harder for compliance tools to determine the correct license.
 
 By default all files without license information are under the default
 license of the kernel, which is GPL version 2.
 
 Update the files which contain no license information with the 'GPL-2.0'
 SPDX license identifier.  The SPDX identifier is a legally binding
 shorthand, which can be used instead of the full boiler plate text.
 
 This patch is based on work done by Thomas Gleixner and Kate Stewart and
 Philippe Ombredanne.
 
 How this work was done:
 
 Patches were generated and checked against linux-4.14-rc6 for a subset of
 the use cases:
  - file had no licensing information it it.
  - file was a */uapi/* one with no licensing information in it,
  - file was a */uapi/* one with existing licensing information,
 
 Further patches will be generated in subsequent months to fix up cases
 where non-standard license headers were used, and references to license
 had to be inferred by heuristics based on keywords.
 
 The analysis to determine which SPDX License Identifier to be applied to
 a file was done in a spreadsheet of side by side results from of the
 output of two independent scanners (ScanCode & Windriver) producing SPDX
 tag:value files created by Philippe Ombredanne.  Philippe prepared the
 base worksheet, and did an initial spot review of a few 1000 files.
 
 The 4.13 kernel was the starting point of the analysis with 60,537 files
 assessed.  Kate Stewart did a file by file comparison of the scanner
 results in the spreadsheet to determine which SPDX license identifier(s)
 to be applied to the file. She confirmed any determination that was not
 immediately clear with lawyers working with the Linux Foundation.
 
 Criteria used to select files for SPDX license identifier tagging was:
  - Files considered eligible had to be source code files.
  - Make and config files were included as candidates if they contained >5
    lines of source
  - File already had some variant of a license header in it (even if <5
    lines).
 
 All documentation files were explicitly excluded.
 
 The following heuristics were used to determine which SPDX license
 identifiers to apply.
 
  - when both scanners couldn't find any license traces, file was
    considered to have no license information in it, and the top level
    COPYING file license applied.
 
    For non */uapi/* files that summary was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0                                              11139
 
    and resulted in the first patch in this series.
 
    If that file was a */uapi/* path one, it was "GPL-2.0 WITH
    Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0 WITH Linux-syscall-note                        930
 
    and resulted in the second patch in this series.
 
  - if a file had some form of licensing information in it, and was one
    of the */uapi/* ones, it was denoted with the Linux-syscall-note if
    any GPL family license was found in the file or had no licensing in
    it (per prior point).  Results summary:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|------
    GPL-2.0 WITH Linux-syscall-note                       270
    GPL-2.0+ WITH Linux-syscall-note                      169
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
    LGPL-2.1+ WITH Linux-syscall-note                      15
    GPL-1.0+ WITH Linux-syscall-note                       14
    ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
    LGPL-2.0+ WITH Linux-syscall-note                       4
    LGPL-2.1 WITH Linux-syscall-note                        3
    ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
    ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
 
    and that resulted in the third patch in this series.
 
  - when the two scanners agreed on the detected license(s), that became
    the concluded license(s).
 
  - when there was disagreement between the two scanners (one detected a
    license but the other didn't, or they both detected different
    licenses) a manual inspection of the file occurred.
 
  - In most cases a manual inspection of the information in the file
    resulted in a clear resolution of the license that should apply (and
    which scanner probably needed to revisit its heuristics).
 
  - When it was not immediately clear, the license identifier was
    confirmed with lawyers working with the Linux Foundation.
 
  - If there was any question as to the appropriate license identifier,
    the file was flagged for further research and to be revisited later
    in time.
 
 In total, over 70 hours of logged manual review was done on the
 spreadsheet to determine the SPDX license identifiers to apply to the
 source files by Kate, Philippe, Thomas and, in some cases, confirmation
 by lawyers working with the Linux Foundation.
 
 Kate also obtained a third independent scan of the 4.13 code base from
 FOSSology, and compared selected files where the other two scanners
 disagreed against that SPDX file, to see if there was new insights.  The
 Windriver scanner is based on an older version of FOSSology in part, so
 they are related.
 
 Thomas did random spot checks in about 500 files from the spreadsheets
 for the uapi headers and agreed with SPDX license identifier in the
 files he inspected. For the non-uapi files Thomas did random spot checks
 in about 15000 files.
 
 In initial set of patches against 4.14-rc6, 3 files were found to have
 copy/paste license identifier errors, and have been fixed to reflect the
 correct identifier.
 
 Additionally Philippe spent 10 hours this week doing a detailed manual
 inspection and review of the 12,461 patched files from the initial patch
 version early this week with:
  - a full scancode scan run, collecting the matched texts, detected
    license ids and scores
  - reviewing anything where there was a license detected (about 500+
    files) to ensure that the applied SPDX license was correct
  - reviewing anything where there was no detection but the patch license
    was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
    SPDX license was correct
 
 This produced a worksheet with 20 files needing minor correction.  This
 worksheet was then exported into 3 different .csv files for the
 different types of files to be modified.
 
 These .csv files were then reviewed by Greg.  Thomas wrote a script to
 parse the csv files and add the proper SPDX tag to the file, in the
 format that the file expected.  This script was further refined by Greg
 based on the output to detect more types of files automatically and to
 distinguish between header and source .c files (which need different
 comment types.)  Finally Greg ran the script using the .csv files to
 generate the patches.
 
 Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
 Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
 Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
 6dVh26uchcEQLN/XqUDt
 =x306
 -----END PGP SIGNATURE-----

Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull initial SPDX identifiers from Greg KH:
 "License cleanup: add SPDX license identifiers to some files

  Many source files in the tree are missing licensing information, which
  makes it harder for compliance tools to determine the correct license.

  By default all files without license information are under the default
  license of the kernel, which is GPL version 2.

  Update the files which contain no license information with the
  'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
  binding shorthand, which can be used instead of the full boiler plate
  text.

  This patch is based on work done by Thomas Gleixner and Kate Stewart
  and Philippe Ombredanne.

  How this work was done:

  Patches were generated and checked against linux-4.14-rc6 for a subset
  of the use cases:

   - file had no licensing information it it.

   - file was a */uapi/* one with no licensing information in it,

   - file was a */uapi/* one with existing licensing information,

  Further patches will be generated in subsequent months to fix up cases
  where non-standard license headers were used, and references to
  license had to be inferred by heuristics based on keywords.

  The analysis to determine which SPDX License Identifier to be applied
  to a file was done in a spreadsheet of side by side results from of
  the output of two independent scanners (ScanCode & Windriver)
  producing SPDX tag:value files created by Philippe Ombredanne.
  Philippe prepared the base worksheet, and did an initial spot review
  of a few 1000 files.

  The 4.13 kernel was the starting point of the analysis with 60,537
  files assessed. Kate Stewart did a file by file comparison of the
  scanner results in the spreadsheet to determine which SPDX license
  identifier(s) to be applied to the file. She confirmed any
  determination that was not immediately clear with lawyers working with
  the Linux Foundation.

  Criteria used to select files for SPDX license identifier tagging was:

   - Files considered eligible had to be source code files.

   - Make and config files were included as candidates if they contained
     >5 lines of source

   - File already had some variant of a license header in it (even if <5
     lines).

  All documentation files were explicitly excluded.

  The following heuristics were used to determine which SPDX license
  identifiers to apply.

   - when both scanners couldn't find any license traces, file was
     considered to have no license information in it, and the top level
     COPYING file license applied.

     For non */uapi/* files that summary was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0                                              11139

     and resulted in the first patch in this series.

     If that file was a */uapi/* path one, it was "GPL-2.0 WITH
     Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
     was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0 WITH Linux-syscall-note                        930

     and resulted in the second patch in this series.

   - if a file had some form of licensing information in it, and was one
     of the */uapi/* ones, it was denoted with the Linux-syscall-note if
     any GPL family license was found in the file or had no licensing in
     it (per prior point). Results summary:

       SPDX license identifier                            # files
       ---------------------------------------------------|------
       GPL-2.0 WITH Linux-syscall-note                       270
       GPL-2.0+ WITH Linux-syscall-note                      169
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
       LGPL-2.1+ WITH Linux-syscall-note                      15
       GPL-1.0+ WITH Linux-syscall-note                       14
       ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
       LGPL-2.0+ WITH Linux-syscall-note                       4
       LGPL-2.1 WITH Linux-syscall-note                        3
       ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
       ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

     and that resulted in the third patch in this series.

   - when the two scanners agreed on the detected license(s), that
     became the concluded license(s).

   - when there was disagreement between the two scanners (one detected
     a license but the other didn't, or they both detected different
     licenses) a manual inspection of the file occurred.

   - In most cases a manual inspection of the information in the file
     resulted in a clear resolution of the license that should apply
     (and which scanner probably needed to revisit its heuristics).

   - When it was not immediately clear, the license identifier was
     confirmed with lawyers working with the Linux Foundation.

   - If there was any question as to the appropriate license identifier,
     the file was flagged for further research and to be revisited later
     in time.

  In total, over 70 hours of logged manual review was done on the
  spreadsheet to determine the SPDX license identifiers to apply to the
  source files by Kate, Philippe, Thomas and, in some cases,
  confirmation by lawyers working with the Linux Foundation.

  Kate also obtained a third independent scan of the 4.13 code base from
  FOSSology, and compared selected files where the other two scanners
  disagreed against that SPDX file, to see if there was new insights.
  The Windriver scanner is based on an older version of FOSSology in
  part, so they are related.

  Thomas did random spot checks in about 500 files from the spreadsheets
  for the uapi headers and agreed with SPDX license identifier in the
  files he inspected. For the non-uapi files Thomas did random spot
  checks in about 15000 files.

  In initial set of patches against 4.14-rc6, 3 files were found to have
  copy/paste license identifier errors, and have been fixed to reflect
  the correct identifier.

  Additionally Philippe spent 10 hours this week doing a detailed manual
  inspection and review of the 12,461 patched files from the initial
  patch version early this week with:

   - a full scancode scan run, collecting the matched texts, detected
     license ids and scores

   - reviewing anything where there was a license detected (about 500+
     files) to ensure that the applied SPDX license was correct

   - reviewing anything where there was no detection but the patch
     license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
     applied SPDX license was correct

  This produced a worksheet with 20 files needing minor correction. This
  worksheet was then exported into 3 different .csv files for the
  different types of files to be modified.

  These .csv files were then reviewed by Greg. Thomas wrote a script to
  parse the csv files and add the proper SPDX tag to the file, in the
  format that the file expected. This script was further refined by Greg
  based on the output to detect more types of files automatically and to
  distinguish between header and source .c files (which need different
  comment types.) Finally Greg ran the script using the .csv files to
  generate the patches.

  Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
  Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
  Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  License cleanup: add SPDX license identifier to uapi header files with a license
  License cleanup: add SPDX license identifier to uapi header files with no license
  License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 10:04:46 -07:00
Linus Torvalds
fdebad11e5 linux-kselftest-4.14-rc7
This update consists of a single fix to a regression to printing
 individual test results to the console. An earlier commit changed it
 to printing just the summary of results, which will negatively impact
 users that rely on console log to look at the individual test failures.
 
 This fix makes it optional to print summary and by default results get
 printed to the console.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZ+zzwAAoJEAsCRMQNDUMcUvcQAI51uq9C0qWSYUK3WFTFHy7I
 qhyU+bvIIOEt3JcgK11vBy2FOK5SVWtB4ABJXtFFL4iUoL0UKM7Kaupf2gyuo0J8
 2RJTYiZZMgVWuyjK2YVCz493iqT6u1kj1nUnrYTeMaz4s/POWF4/7C5NseROKN0e
 ER3378Z6+kBX6uUPmI+gI3+GQ0HWZ4COWaSjDU6sUVY5lMWlZJNO6juTe/LPNQZ5
 kyXDHWCqq4wTB+/n6buPzL6p+7eLSwEHt/qBxbgaKn4i0xFTiDui4v1CuiMzyc5M
 TR32ZJzkNVCenPQWshGeq+DzhtK19SvRXUMG1kJL8DHnSwQ4eU13Smef4M0vQPIc
 FoaXQ3S1IuJkcbCwhEPszFIjqfRJ6CIJEcvxlLRMMYfxw90Unt8WKAdsCvWBhPKz
 zyoZWAcV5D5YYYEyzWavNnN8jwRnUm0991tkrXbnauVKkF9XLEzsl85wByJmuFn3
 ekKjc9gGNtGJ5WzWluh0RYZ9Wbn409lphpxhx+nEQbOsmMjZCb4QJMZtmWA3wVVE
 El0ui5qJasjbWu9GWVH4k+ey8yrdZheA2hGa4fj8pQAGBlTp+qfvMmZ/Lvsgeq8O
 qKqVtUPg48k+LguT5Ndn2TSPiZnT5+C53rcTRynlkmRcCePXh45rnmuqApB2FQ/8
 itITyk/yAKSH55cDuQU5
 =ZvGB
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fix from Shuah Khan:
 "This consists of a single fix to a regression to printing individual
  test results to the console. An earlier commit changed it to printing
  just the summary of results, which will negatively impact users that
  rely on console log to look at the individual test failures.

  This fix makes it optional to print summary and by default results get
  printed to the console"

* tag 'linux-kselftest-4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: lib.mk: print individual test results to console by default
2017-11-02 09:33:23 -07:00
Greg Kroah-Hartman
e2be04c7f9 License cleanup: add SPDX license identifier to uapi header files with a license
Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be.  This makes it hard for
compliance tools to determine the correct license.

Update these files with an SPDX license identifier.  The identifier was
chosen based on the license information in the file.

GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.

Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier.  The format
is:
        ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)

SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text.  The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:20:11 +01:00
Greg Kroah-Hartman
6f52b16c5b License cleanup: add SPDX license identifier to uapi header files with no license
Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.

By default are files without license information under the default
license of the kernel, which is GPLV2.  Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

otherwise syscall usage would not be possible.

Update the files which contain no license information with an SPDX
license identifier.  The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception.  SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:19:54 +01:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Namhyung Kim
7285cf3325 perf srcline: Show correct function name for srcline of callchains
When libbfd is not used, it doesn't show proper function name and reuse
the original symbol of the sample.  That's because it passes the
original sym to inline_list__append().  As `addr2line -f` returns
function names as well, use that to create an inline_sym and pass it to
inline_list__append().

For example, following data shows that inlined entries of main have same
name (main).

Before:
  $ perf report -g srcline -q | head
      45.22%  inlining     libm-2.26.so      [.] __hypot_finite
              |
              ---__hypot_finite ??:0
                 |
                 |--44.15%--hypot ??:0
                 |          main complex:589
                 |          main complex:597
                 |          main complex:654
                 |          main complex:664
                 |          main inlining.cpp:14

After:
  $ perf report -g srcline -q | head
      45.22%  inlining     libm-2.26.so      [.] __hypot_finite
              |
              ---__hypot_finite
                 |
                 |--44.15%--hypot
                 |          std::__complex_abs complex:589 (inlined)
                 |          std::abs<double> complex:597 (inlined)
                 |          std::_Norm_helper<true>::_S_do_it<double> complex:654 (inlined)
                 |          std::norm<double> complex:664 (inlined)
                 |          main inlining.cpp:14

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20171031020654.31163-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-01 11:44:38 -03:00
Namhyung Kim
b7b75a60b2 perf srcline: Fix memory leak in addr2inlines()
When libbfd is not used, addr2inlines() executes `addr2line -i` and
process output line by line.  But it resets filename to NULL in the loop
so getline() allocates additional memory everytime instead of realloc.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20171031020654.31163-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-01 11:43:56 -03:00
John Fastabend
04686ef299 bpf: remove SK_REDIRECT from UAPI
Now that SK_REDIRECT is no longer a valid return code. Remove it
from the UAPI completely. Then do a namespace remapping internal
to sockmap so SK_REDIRECT is no longer externally visible.

Patchs primary change is to do a namechange from SK_REDIRECT to
__SK_REDIRECT

Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01 11:43:50 +09:00
Shuah Khan
a323335e62 selftests: lib.mk: print individual test results to console by default
Change run_tests to print individual test results to console by default.
Introduce "summary" option to print individual test results to a file
/tmp/test_name and just print the summary to the console.

This change is necessary to support use-cases where test machines get
rebooted once tests are run and the console log should contain the full
results.

In the following example, individual test results with "summary=1" option
are written to /tmp/kcmp_test

make --silent TARGETS=kcmp kselftest

TAP version 13
selftests: kcmp_test
========================================
pid1:  30126 pid2:  30127 FD:  2 FILES:  2 VM:  1 FS:  2 SIGHAND:  2 IO:
0 SYSVSEM:  0 INV: -1
PASS: 0 returned as expected
PASS: 0 returned as expected
FAIL: 0 expected but -1 returned (Invalid argument)
Pass 2 Fail 1 Xfail 0 Xpass 0 Skip 0 Error 0
1..3
Bail out!
Pass 2 Fail 1 Xfail 0 Xpass 0 Skip 0 Error 0
1..3
Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..0
ok 1..1 selftests: kcmp_test [PASS]

make --silent TARGETS=kcmp summary=1 kselftest
TAP version 13
selftests: kcmp_test
========================================
ok 1..1 selftests: kcmp_test [PASS]

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-10-31 13:24:00 -06:00
Arnaldo Carvalho de Melo
1de3038d00 perf trace beauty kcmp: Beautify arguments
For some unknown reason there is no entry in tracefs's syscalls for
kcmp, i.e. no tracefs/events/syscalls/sys_{enter,exit}_kcmp, so we need
to provide a data dictionary for the fields.

To beautify the 'type' argument we automatically generate a strarray
from tools/include/uapi/kcmp.h, the idx1 and idx2 args, nowadays used
only if type == KCMP_FILE, are masked for all the other types and a
lookup is made for the thread and fd to show the path, if possible,
getting it from the probe:vfs_getname if in place or from procfs, races
allowing.

A system wide strace like tracing session, with callchains shows just
one user so far in this fedora 25 machine:

  # perf trace --max-stack 5 -e kcmp
  <SNIP>
  1502914.400 ( 0.001 ms): systemd/1 kcmp(pid1: 1 (systemd), pid2: 1 (systemd), type: FILE, idx1: 271<socket:[4723475]>, idx2: 25<socket:[4788686]>) = -1 ENOSYS Function not implemented
                                         syscall (/usr/lib64/libc-2.25.so)
                                         same_fd (/usr/lib/systemd/libsystemd-shared-233.so)
                                         service_add_fd_store (/usr/lib/systemd/systemd)
                                         service_notify_message.lto_priv.127 (/usr/lib/systemd/systemd)
  1502914.407 ( 0.001 ms): systemd/1 kcmp(pid1: 1 (systemd), pid2: 1 (systemd), type: FILE, idx1: 270<socket:[4726396]>, idx2: 25<socket:[4788686]>) = -1 ENOSYS Function not implemented
                                         syscall (/usr/lib64/libc-2.25.so)
                                         same_fd (/usr/lib/systemd/libsystemd-shared-233.so)
                                         service_add_fd_store (/usr/lib/systemd/systemd)
                                         service_notify_message.lto_priv.127 (/usr/lib/systemd/systemd)
  <SNIP>

The backtraces seem to agree this is really kcmp(), but this system
doesn't have the sys_kcmp(), bummer:

  # uname -a
  Linux jouet 4.14.0-rc3+ #1 SMP Fri Oct 13 12:21:12 -03 2017 x86_64 x86_64 x86_64 GNU/Linux
  # grep kcmp /proc/kallsyms
  ffffffffb60b8890 W sys_kcmp
  $ grep CONFIG_CHECKPOINT_RESTORE ../build/v4.14.0-rc3+/.config
  # CONFIG_CHECKPOINT_RESTORE is not set
  $

So systemd uses it, good fedora kernel config has it:

  $ grep CONFIG_CHECKPOINT_RESTORE /boot/config-4.13.4-200.fc26.x86_64
  CONFIG_CHECKPOINT_RESTORE=y
  [acme@jouet linux]$

/me goes to rebuild a kernel...

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-gz5fca968viw8m7hryjqvrln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-31 16:17:04 -03:00
Arnaldo Carvalho de Melo
0a2f7540ab perf trace beauty: Implement pid_fd beautifier
One that given a pid and a fd, will try to get the path for that fd.
Will be used in the upcoming kcmp's KCMP_FILE beautifier.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7ketygp2dvs9h13wuakfncws@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-31 16:17:03 -03:00
Arnaldo Carvalho de Melo
735e215e95 tools include uapi: Grab a copy of linux/kcmp.h
We will use it to generate tables for beautifying kcmp's 'type' arg.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-r35zr79invmpinfe1zu57cas@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-31 16:17:03 -03:00
Namhyung Kim
d6332a176b perf callchain: Fix double mapping al->addr for children without self period
Milian Wolff found a problem he described in [1] and that for him would
get fixed:

"Note how most of the large offset values are now gone. Most notably, we
get proper srcline resolution for the random.h and complex headers."

Then Namhyung found the root cause:

"I looked into it and found a bug handling cumulative (children)
entries.  For children entries that have no self period, the al->addr (so
he->ip) ends up having an doubly-mapped address.

It seems to be there from the beginning but only affects entries that
have no srclines - finding srcline itself is done using a different
address but it will show the invalid address if no srcline was found.  I
think we should fix the commit c7405d85d7 ("perf tools: Update cpumode
for each cumulative entry")."

[1] https://lkml.kernel.org/r/20171018185350.14893-7-milian.wolff@kdab.com

Reported-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: kernel-team@lge.com
Fixes: c7405d85d7 ("perf tools: Update cpumode for each cumulative entry")
Link: https://lkml.kernel.org/r/20171020051533.GA2746@sejong
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-31 16:14:50 -03:00
Brenda J. Butler
518828fcdf tc-testing: fix arg to ip command: -s -> -n
Fixes: 31c2611b66 ("selftests: Introduce a new test case to tc testsuite")
Fixes: 76b903ee19 ("selftests: Introduce tc testsuite")
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-31 11:12:52 +09:00
Jiri Olsa
021b462a51 perf stat: Make --per-thread update shadow stats to show metrics
We should support this because it would allow easily to collect metrics
for different threads in applications.

Original patch from posted by Jin Yao in here [1].

1. Current output, for example:

root@skl:/tmp# perf stat --per-thread -p 21623
^C
 Performance counter stats for process id '21623':

          vmstat-21623              0.517479      task-clock (msec)         #    0.000 CPUs utilized
          vmstat-21623                     1      context-switches
          vmstat-21623                     0      cpu-migrations
          vmstat-21623                     0      page-faults
          vmstat-21623               461,306      cycles
          vmstat-21623               630,724      instructions
          vmstat-21623               136,265      branches
          vmstat-21623                 2,520      branch-misses

       1.444020756 seconds time elapsed

root@skl:/tmp# perf stat --per-thread --metrics ipc -p 21623
^C
 Performance counter stats for process id '21623':

          vmstat-21623               631,185      inst_retired.any
          vmstat-21623               605,893      cpu_clk_unhalted.thread

       1.415679293 seconds time elapsed

2. With this patch, the result would be:

root@skl:/tmp# perf stat --per-thread -p 21623
^C
 Performance counter stats for process id '21623':

          vmstat-21623              0.533759      task-clock (msec)         #    0.000 CPUs utilized
          vmstat-21623                     1      context-switches          #    0.002 M/sec
          vmstat-21623                     0      cpu-migrations            #    0.000 K/sec
          vmstat-21623                     0      page-faults               #    0.000 K/sec
          vmstat-21623               473,896      cycles                    #    0.888 GHz
          vmstat-21623               631,072      instructions              #    1.33  insn per cycle
          vmstat-21623               136,307      branches                  #  255.372 M/sec
          vmstat-21623                 2,524      branch-misses             #    1.85% of all branches

       1.544862861 seconds time elapsed

root@skl:/tmp# perf stat --per-thread --metrics ipc -p 21623
^C
 Performance counter stats for process id '21623':

          vmstat-21623             1,259,104      inst_retired.any          #      1.2 IPC
          vmstat-21623             1,056,756      cpu_clk_unhalted.thread

       2.040954502 seconds time elapsed

[1] https://marc.info/?l=linux-kernel&m=150777054620511&w=2

Originally-from: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-tr8ntktxmy4qc5769ajg5u6c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-30 13:41:48 -03:00
Jiri Olsa
54830dd0c3 perf stat: Move the shadow stats scale computation in perf_stat__update_shadow_stats
Move the shadow stats scale computation to the
perf_stat__update_shadow_stats() function, so it's centralized and we
don't forget to do it. It also saves few lines of code.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-htg7mmyxv6pcrf57qyo6msid@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-30 13:40:33 -03:00
Jiri Olsa
e268687bfb perf tools: Add perf_data_file__write function
Adding perf_data_file__write function to provide single file write
operation.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c3f9p4xzykr845ktqcek6p4t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-30 13:38:50 -03:00
Jiri Olsa
eae8ad8042 perf tools: Add struct perf_data_file
Add struct perf_data_file to represent a single file within a perf_data
struct.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c3f9p4xzykr845ktqcek6p4t@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-30 13:37:37 -03:00
Jiri Olsa
8ceb41d7e3 perf tools: Rename struct perf_data_file to perf_data
Rename struct perf_data_file to perf_data, because we will add the
possibility to have multiple files under perf.data, so the 'perf_data'
name fits better.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-39wn4d77phel3dgkzo3lyan0@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-30 13:36:09 -03:00
Arnaldo Carvalho de Melo
642ee1c6df perf script: Print information about per-event-dump files
For a file generated by "perf sched record sleep 50":

  # perf script --per-event-dump
  [ perf script: Wrote 23.121 MB perf.data.sched:sched_switch.dump (206015 samples) ]
  [ perf script: Wrote 0.000 MB perf.data.sched:sched_stat_wait.dump (0 samples) ]
  [ perf script: Wrote 0.000 MB perf.data.sched:sched_stat_sleep.dump (0 samples) ]
  [ perf script: Wrote 0.000 MB perf.data.sched:sched_stat_iowait.dump (0 samples) ]
  [ perf script: Wrote 17.680 MB perf.data.sched:sched_stat_runtime.dump (129342 samples) ]
  [ perf script: Wrote 0.000 MB perf.data.sched:sched_process_fork.dump (24 samples) ]
  [ perf script: Wrote 11.328 MB perf.data.sched:sched_wakeup.dump (106770 samples) ]
  [ perf script: Wrote 0.000 MB perf.data.sched:sched_wakeup_new.dump (24 samples) ]
  [ perf script: Wrote 2.477 MB perf.data.sched:sched_migrate_task.dump (20434 samples) ]
  #

Similar to what is generated by 'perf record'.

Based-on-a-patch-by: yuzhoujian <yuzhoujian@didichuxing.com>
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1508921599-10832-3-git-send-email-yuzhoujian@didichuxing.com
Link: http://lkml.kernel.org/n/tip-xuketkkjuk2c0qz546ypd1u7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-30 13:11:15 -03:00
Linus Torvalds
19e12196da Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix route leak in xfrm_bundle_create().

 2) In mac80211, validate user rate mask before configuring it. From
    Johannes Berg.

 3) Properly enforce memory limits in fair queueing code, from Toke
    Hoiland-Jorgensen.

 4) Fix lockdep splat in inet_csk_route_req(), from Eric Dumazet.

 5) Fix TSO header allocation and management in mvpp2 driver, from Yan
    Markman.

 6) Don't take socket lock in BH handler in strparser code, from Tom
    Herbert.

 7) Don't show sockets from other namespaces in AF_UNIX code, from
    Andrei Vagin.

 8) Fix double free in error path of tap_open(), from Girish Moodalbail.

 9) Fix TX map failure path in igb and ixgbe, from Jean-Philippe Brucker
    and Alexander Duyck.

10) Fix DCB mode programming in stmmac driver, from Jose Abreu.

11) Fix err_count handling in various tunnels (ipip, ip6_gre). From Xin
    Long.

12) Properly align SKB head before building SKB in tuntap, from Jason
    Wang.

13) Avoid matching qdiscs with a zero handle during lookups, from Cong
    Wang.

14) Fix various endianness bugs in sctp, from Xin Long.

15) Fix tc filter callback races and add selftests which trigger the
    problem, from Cong Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
  selftests: Introduce a new test case to tc testsuite
  selftests: Introduce a new script to generate tc batch file
  net_sched: fix call_rcu() race on act_sample module removal
  net_sched: add rtnl assertion to tcf_exts_destroy()
  net_sched: use tcf_queue_work() in tcindex filter
  net_sched: use tcf_queue_work() in rsvp filter
  net_sched: use tcf_queue_work() in route filter
  net_sched: use tcf_queue_work() in u32 filter
  net_sched: use tcf_queue_work() in matchall filter
  net_sched: use tcf_queue_work() in fw filter
  net_sched: use tcf_queue_work() in flower filter
  net_sched: use tcf_queue_work() in flow filter
  net_sched: use tcf_queue_work() in cgroup filter
  net_sched: use tcf_queue_work() in bpf filter
  net_sched: use tcf_queue_work() in basic filter
  net_sched: introduce a workqueue for RCU callbacks of tc filter
  sctp: fix some type cast warnings introduced since very beginning
  sctp: fix a type cast warnings that causes a_rwnd gets the wrong value
  sctp: fix some type cast warnings introduced by transport rhashtable
  sctp: fix some type cast warnings introduced by stream reconf
  ...
2017-10-29 08:11:49 -07:00
Chris Mi
31c2611b66 selftests: Introduce a new test case to tc testsuite
In this patchset, we fixed a tc bug. This patch adds the test case
that reproduces the bug. To run this test case, user should specify
an existing NIC device:
  # sudo ./tdc.py -d enp4s0f0

This test case belongs to category "flower". If user doesn't specify
a NIC device, the test cases belong to "flower" will not be run.

In this test case, we create 1M filters and all filters share the same
action. When destroying all filters, kernel should not panic. It takes
about 18s to run it.

Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29 22:49:31 +09:00