The ARM GIC only supports interrupts with either level-high or
rising-edge types for SPIs. The interrupt type for the Palmas PMIC used
for Tegra114 boards is specified as level-low which is invalid for the
GIC. This has gone undetected because until recently, failures to set
the interrupt type when the interrupts are mapped via firmware (such as
device-tree) have not been reported. Since commits 4b357daed6
("genirq: Look-up trigger type if not specified by caller") and
1e2a7d7849 ("irqdomain: Don't set type when mapping an IRQ"), failure
to set the interrupt type will cause the requesting of the interrupt to
fail and exposing incorrectly configured interrupts.
Please note that although the interrupt type was never being set for the
Palmas PMIC, it was still working fine, because the default type setting
for the interrupt, 'level-high', happen to match the correct type for
the interrupt.
Finally, it should be noted that the Palmas interrupt from the PMIC is
actually 'level-low', however, this interrupt signal is inverted by the
Tegra PMC and so the GIC actually sees a 'level-high' interrupt which is
what should be specified in the device-tree interrupt specifier.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Select proper eMMC HighSpeed mode on Odroid XU. DTS was mixing
"samsung,exynos5250-dw-mshc" compatible (with HS200 as fastest mode)
with a property "mmc-hs400-1_8v" thus leading to failures during
probe.
2. Update Krzysztof Kozlowski's email address in maintainers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=YvD5
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes
Fix for v4.8-rc1:
1. Select proper eMMC HighSpeed mode on Odroid XU. DTS was mixing
"samsung,exynos5250-dw-mshc" compatible (with HS200 as fastest mode)
with a property "mmc-hs400-1_8v" thus leading to failures during
probe.
2. Update Krzysztof Kozlowski's email address in maintainers.
* tag 'samsung-fixes-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski
ARM: dts: exynos: Properly select eMMC HighSpeed mode on Odroid XU
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix typo in imx6sx-sabreauto board wakeup property
- Fix i.MX6UL suspend-to-standby support by adding the
BM_CLPCR_BYP_MMDC_CH0_LPM_HS handling
- Fix a i.MX6UL regression on suspend support, which is caused by
commit 850bea2335 ("arm: Remove unnecessary of_platform_populate
with default match table")
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXtQNxAAoJEFBXWFqHsHzOO/gH/2o5IuMylmAxWur8jAudSMc2
qMD42NJwy6z4z4koMd4O7zQIafR2Sm8jOto8Z07ACAZOaUXU0biat2j9iGm6lv7z
VTgzlWut+pDTfYXwo4MSZjcW3/Xkc2RgZDQCOlwGlLfjhaFjuk8ZEQxetFPtFveN
5FYoLzmWRRza6PI4I5uu1TrdJXQlq2qihZd+OD7Qa78yuzrvNzHRfGBH7h+4Hkyn
uCzaTxh6kyIF9ggK5McMjgAwQv8r/wgJ9mLel9scVULv/qxzefHxKbDX+ewHtZ1q
t3q7q2UpF00Fxd/Wii2BT7p8LNicbHsqorUMGTk81CMVcOeT652z/LO8rx+13+E=
=Dgm6
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
The i.MX fixes for 4.8:
- Fix typo in imx6sx-sabreauto board wakeup property
- Fix i.MX6UL suspend-to-standby support by adding the
BM_CLPCR_BYP_MMDC_CH0_LPM_HS handling
- Fix a i.MX6UL regression on suspend support, which is caused by
commit 850bea2335 ("arm: Remove unnecessary of_platform_populate
with default match table")
* tag 'imx-fixes-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx6ul: populates platform device at .init_machine
ARM: imx6: add missing BM_CLPCR_BYP_MMDC_CH0_LPM_HS setting for imx6ul
ARM: dts: imx6sx-sabreauto: Fix misspelled property
Signed-off-by: Olof Johansson <olof@lixom.net>
am335x RTC zero offset for clkctrl register. Also few other fixes:
- Add missing sysc information for DSI as at least n950 needs it for
the working display
- Fix old elm-id properties that cause nand boot to not work
- Fix overo gpmc nand cs0 range
- FIx overo gpmc nand on boards with ethernet
- Fix logicpd torpedo nand ready pin nand interrupt configuration
-----BEGIN PGP SIGNATURE-----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=P5mg
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.8/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for v4.8-rc cycle, mostly a series of four fixes for
am335x RTC zero offset for clkctrl register. Also few other fixes:
- Add missing sysc information for DSI as at least n950 needs it for
the working display
- Fix old elm-id properties that cause nand boot to not work
- Fix overo gpmc nand cs0 range
- FIx overo gpmc nand on boards with ethernet
- Fix logicpd torpedo nand ready pin nand interrupt configuration
* tag 'omap-for-v4.8/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: logicpd-somlv: Fix NAND device nodes
ARM: dts: logicpd-torpedo-som: Provide NAND ready pin
ARM: dts: overo: fix gpmc nand on boards with ethernet
ARM: dts: overo: fix gpmc nand cs0 range
ARM: dts: am335x: Update elm phandle binding
ARM: OMAP4+: CM: Remove redundant checks for clkctrl_offs of zero
ARM: OMAP4+: Have _omap4_wait_target_* check for valid clkctrl_offs
ARM: OMAP2+: AM33XX: Add HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET flag to rtc hwmod
ARM: OMAP4+: hwmod: Add hwmod flag for HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET
ARM: OMAP3: hwmod data: Add sysc information for DSI
Signed-off-by: Olof Johansson <olof@lixom.net>
Fix lan numbering for the Armada 388 clearfog board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlesKVsACgkQCwYYjhRyO9Ur9gCeNVvnJzBfqYg1t4LBHpjTUdyS
IPoAnjUOm8j9Upl+blN11iLw4hCwxYey
=SEqa
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-4.8-1' of git://git.infradead.org/linux-mvebu into fixes
mvebu fixes for 4.8 (part 1)
Fix lan numbering for the Armada 388 clearfog board
* tag 'mvebu-fixes-4.8-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada-388-clearfog: number LAN ports properly
Signed-off-by: Olof Johansson <olof@lixom.net>
When CONFIG_RANDOMIZE_BASE is selected, we modify the page tables to remap the
kernel at a newly-chosen VA range. We do this with the MMU disabled, but do not
invalidate TLBs prior to re-enabling the MMU with the new tables. Thus the old
mappings entries may still live in TLBs, and we risk violating
Break-Before-Make requirements, leading to TLB conflicts and/or other issues.
We invalidate TLBs when we uninsall the idmap in early setup code, but prior to
this we are subject to issues relating to the Break-Before-Make violation.
Avoid these issues by invalidating the TLBs before the new mappings can be
used by the hardware.
Fixes: f80fb3a3d5 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org> # 4.6+
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull UML fix from Richard Weinberger:
"This contains a fix for a build regression introduced during the merge
window"
* 'for-linus-4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Don't discard .text.exit section
- Fix a regression in the xenbus device preventing userspace tools
from working.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXvdugAAoJEFxbo/MsZsTRAwEH/AiKLV4T0OiARv/df827WVnL
obUmEAh/wVSWZh2xdUNurDOH64lEfeBDSBIpGPQMLGmXLzNEQO9u8ZJYWJ7R1Ryp
JU37lu3DP7HqQqTXsy8ltgcBkwVaQZAo0GRtDeua80ZPdjulnZirwHWS48TuNIFF
pVtW4Eoy1BNAVri55o5hOIub4HUKMRoNB/J+o+SKLyJEvOon+qD4pOfIhR3sqeja
oYVX7QpY/4Miymd5uI9v8LUefS4PW/U58a7tjr414Ng4mzQbZOHDmNyWF0CH27lj
INAmgMXDG7RtiSQMWPKtDQUvuefApKoeRmFr6mQ/xHyCX3cAzOw07+p0rKacCig=
=PTX1
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.8b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen regression fix from David Vrabel:
"Fix a regression in the xenbus device preventing userspace tools from
working"
* tag 'for-linus-4.8b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: change the type of xen_vcpu_id to uint32_t
xenbus: don't look up transaction IDs for ordinary writes
We pass xen_vcpu_id mapping information to hypercalls which require
uint32_t type so it would be cleaner to have it as uint32_t. The
initializer to -1 can be dropped as we always do the mapping before using
it and we never check the 'not set' value anyway.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
native_smp_prepare_cpus
-> default_setup_apic_routing
-> enable_IR_x2apic
-> irq_remapping_prepare
-> intel_prepare_irq_remapping
-> intel_setup_irq_remapping
So IR table is setup even if "noapic" boot parameter is added. As a result we
crash later when the interrupt affinity is set due to a half initialized
remapping infrastructure.
Prevent remap initialization when IOAPIC is disabled.
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Link: http://lkml.kernel.org/r/1471954039-3942-1-git-send-email-wanpeng.li@hotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We can't initialize the list head on deletion as this causes the node to
point to itself, which causes an infinite loop if vmd_irq() happens to be
servicing that node.
The list initialization was trying to fix a bug from multiple calls to
disable the same IRQ. Fix this instead by having the VMD driver track if
the interrupt is enabled.
[bhelgaas: changelog, add "Fixes"]
Fixes: 97e9230635 ("x86/PCI: VMD: Initialize list item in IRQ disable")
Reported-by: Grzegorz Koczot <grzegorz.koczot@intel.com>
Tested-by: Miroslaw Drost <miroslaw.drost@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by Jon Derrick: <jonathan.derrick@intel.com>
Commit e41f501d39 ("vmlinux.lds: account for destructor sections")
added '.text.exit' to EXIT_TEXT which is discarded at link time by default.
This breaks compilation of UML:
`.text.exit' referenced in section `.fini_array' of
/usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o):
defined in discarded section `.text.exit' of
/usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o)
Apparently UML doesn't want to discard exit text, so let's place all EXIT_TEXT
sections in .exit.text.
Fixes: e41f501d39 ("vmlinux.lds: account for destructor sections")
Reported-by: Stefan Traby <stefan@hello-penguin.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Pull crypto fixes from Herbert Xu:
"This fixes a number of memory corruption bugs in the newly added
sha256-mb/sha256-mb code"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sha512-mb - fix ctx pointer
crypto: sha256-mb - fix ctx pointer and digest copy
SARADC controller needs to be reset before programming it, otherwise
it will not function properly.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
SARADC controller needs to be reset before programming it, otherwise
it will not function properly.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Since the non-secure copies of banked registers lack architecturally
defined reset values, there is no actual guarantee when entering in Hyp
from secure-only firmware that the Non-Secure PL1 state will look the
way that kernel entry (in particular the decompressor stub) expects.
So far, we've been getting away with it thanks to implementation details
of ARMv7 cores and/or bootloader behaviour, but for the sake of forwards
compatibility let's try to ensure that we have a minimally sane state
before dropping down into it.
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit d781145549 (""ARM: 8512/1: proc-v7.S: Adjust stack address when
XIP_KERNEL"") introduced a macro which lives under asm/memory.h.
Unfortunately, for MMU-less systems (like R-class) it leads to build failure:
arch/arm/mm/proc-v7.S: Assembler messages:
arch/arm/mm/proc-v7.S:538: Error: unrecognised relocation suffix
make[1]: *** [arch/arm/mm/proc-v7.o] Error 1
make: *** [arch/arm/mm] Error 2
since it is implicitly pulled via asm/pgtable.h for MMU capable systems only.
To fix it include asm/memory.h explicitly.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Since we switched to use pxa_timer, we need to provide the OSTIMER0
clock. However, as the clock is initialised early, we need to provide
the clock early as well, so that pxa_timer can find it. Adding the
clock to the clkdev table at core_initcall() time is way too late.
Move the initialisation earlier.
Fixes: ee3a4020f7 ("ARM: 8250/1: sa1100: provide OSTIMER0 clock for pxa_timer")
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
- Support for Syscall ABI v4 with upstream gcc 6.x
- Lockdep fix (Daniel Mentz)
- gdb register clobber (Liav Rehana)
- Couple of missing exports for modules
- Other fixes here and there
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=1WGt
-----END PGP SIGNATURE-----
Merge tag 'arc-4.8-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- support for Syscall ABI v4 with upstream gcc 6.x
- lockdep fix (Daniel Mentz)
- gdb register clobber (Liav Rehana)
- couple of missing exports for modules
- other fixes here and there
* tag 'arc-4.8-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: export __udivdi3 for modules
ARC: mm: fix build breakage with STRICT_MM_TYPECHECKS
ARC: export kmap
ARC: Support syscall ABI v4
ARC: use correct offset in pt_regs for saving/restoring user mode r25
ARC: Elide redundant setup of DMA callbacks
ARC: Call trace_hardirqs_on() before enabling irqs
Set cpu_alert0 temperature to 85°C instead of 850°C.
Fixes: 32a5d2d170 ("ARM: dts: sun5i: Add cpu thermal zones to dtsi")
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
hmi.c functions are unused unless sibling_subcore_state is nonzero, and
that in turn happens only if KVM is in use. So move the code to
arch/powerpc/kvm/, putting it under CONFIG_KVM_BOOK3S_HV_POSSIBLE
rather than CONFIG_PPC_BOOK3S_64. The sibling_subcore_state is also
included in struct paca_struct only if KVM is supported by the kernel.
Cc: Daniel Axtens <dja@axtens.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: kvm-ppc@vger.kernel.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
MCE must not use PACA_EXGEN. When a general exception enables MSR_RI,
that means SPRN_SRR[01] and SPRN_SPRG are no longer used. However the
PACA save area is still in use.
Acked-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
When booting from an OpenFirmware which supports it, we use the
"ibm,client-architecture-support" firmware call to communicate
our capabilities to firmware.
The format of the structure we pass to firmware is specified in
PAPR (Power Architecture Platform Requirements), or the public version
LoPAPR (Linux on Power Architecture Platform Reference).
Referring to table 244 in LoPAPR v1.1, option vector 5 contains a 4 byte
field at bytes 17-20 for the "Platform Facilities Enable". This is
followed by a 1 byte field at byte 21 for "Sub-Processor Represenation
Level".
Comparing to the code, there we have the Platform Facilities
options (OV5_PFO_*) at byte 17, but we fail to pad that field out to its
full width of 4 bytes. This means the OV5_SUB_PROCESSORS option is
incorrectly placed at byte 18.
Fix it by adding zero bytes for bytes 18, 19, 20, and comment the bytes
to hopefully make it clearer in future.
As far as I'm aware nothing actually consumes this value at this time,
so the effect of this bug is nil in practice.
It does mean we've been incorrectly setting bit 15 of the "Platform
Facilities Enable" option for the past ~3 1/2 years, so we should avoid
allocating that bit to anything else in future.
Fixes: df77c79920 ("powerpc/pseries: Update ibm,architecture.vec for PAPR 2.7/POWER8")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
We observed a kernel oops when running a PPC guest with config NR_CPUS=4
and qemu option "-smp cores=1,threads=8":
[ 30.634781] Unable to handle kernel paging request for data at
address 0xc00000014192eb17
[ 30.636173] Faulting instruction address: 0xc00000000003e5cc
[ 30.637069] Oops: Kernel access of bad area, sig: 11 [#1]
[ 30.637877] SMP NR_CPUS=4 NUMA pSeries
[ 30.638471] Modules linked in:
[ 30.638949] CPU: 3 PID: 27 Comm: migration/3 Not tainted
4.7.0-07963-g9714b26 #1
[ 30.640059] task: c00000001e29c600 task.stack: c00000001e2a8000
[ 30.640956] NIP: c00000000003e5cc LR: c00000000003e550 CTR:
0000000000000000
[ 30.642001] REGS: c00000001e2ab8e0 TRAP: 0300 Not tainted
(4.7.0-07963-g9714b26)
[ 30.643139] MSR: 8000000102803033 <SF,VEC,VSX,FP,ME,IR,DR,RI,LE,TM[E]> CR: 22004084 XER: 00000000
[ 30.644583] CFAR: c000000000009e98 DAR: c00000014192eb17 DSISR: 40000000 SOFTE: 0
GPR00: c00000000140a6b8 c00000001e2abb60 c0000000016dd300 0000000000000003
GPR04: 0000000000000000 0000000000000004 c0000000016e5920 0000000000000008
GPR08: 0000000000000004 c00000014192eb17 0000000000000000 0000000000000020
GPR12: c00000000140a6c0 c00000000ffffc00 c0000000000d3ea8 c00000001e005680
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 c00000001e6b3a00 0000000000000000 0000000000000001
GPR24: c00000001ff85138 c00000001ff85130 000000001eb6f000 0000000000000001
GPR28: 0000000000000000 c0000000017014e0 0000000000000000 0000000000000018
[ 30.653882] NIP [c00000000003e5cc] __cpu_disable+0xcc/0x190
[ 30.654713] LR [c00000000003e550] __cpu_disable+0x50/0x190
[ 30.655528] Call Trace:
[ 30.655893] [c00000001e2abb60] [c00000000003e550] __cpu_disable+0x50/0x190 (unreliable)
[ 30.657280] [c00000001e2abbb0] [c0000000000aca0c] take_cpu_down+0x5c/0x100
[ 30.658365] [c00000001e2abc10] [c000000000163918] multi_cpu_stop+0x1a8/0x1e0
[ 30.659617] [c00000001e2abc60] [c000000000163cc0] cpu_stopper_thread+0xf0/0x1d0
[ 30.660737] [c00000001e2abd20] [c0000000000d8d70] smpboot_thread_fn+0x290/0x2a0
[ 30.661879] [c00000001e2abd80] [c0000000000d3fa8] kthread+0x108/0x130
[ 30.662876] [c00000001e2abe30] [c000000000009968] ret_from_kernel_thread+0x5c/0x74
[ 30.664017] Instruction dump:
[ 30.664477] 7bde1f24 38a00000 787f1f24 3b600001 39890008 7d204b78 7d05e214 7d0b07b4
[ 30.665642] 796b1f24 7d26582a 7d204a14 7d29f214 <7d4048a8> 7d4a3878 7d4049ad 40c2fff4
[ 30.666854] ---[ end trace 32643b7195717741 ]---
The reason of this is that in __cpu_disable(), when we try to set the
cpu_sibling_mask or cpu_core_mask of the sibling CPUs of the disabled
one, we don't check whether the current configuration employs those
sibling CPUs(hw threads). And if a CPU is not employed by a
configuration, the percpu structures cpu_{sibling,core}_mask are not
allocated, therefore accessing those cpumasks will result in problems as
above.
This patch fixes this problem by adding an addition check on whether the
id is no less than nr_cpu_ids in the sibling CPU iteration code.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
These files were only including module.h for exception table
related functions. We've now separated that content out into its
own file "extable.h" so now move over to that and avoid all the
extra header content in module.h that we don't really need to compile
these files.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Unsigned type is always non-negative, so the loop could not end in case
condition is never true.
The problem has been detected using semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This patch leverages 'struct pci_host_bridge' from the PCI subsystem
in order to free the pci_controller only after the last reference to
its devices is dropped (avoiding an oops in pcibios_release_device()
if the last reference is dropped after pcibios_free_controller()).
The patch relies on pci_host_bridge.release_fn() (and .release_data),
which is called automatically by the PCI subsystem when the root bus
is released (i.e., the last reference is dropped). Those fields are
set via pci_set_host_bridge_release() (e.g. in the platform-specific
implementation of pcibios_root_bridge_prepare()).
It introduces the 'pcibios_free_controller_deferred()' .release_fn()
and it expects .release_data to hold a pointer to the pci_controller.
The function implictly calls 'pcibios_free_controller()', so an user
must *NOT* explicitly call it if using the new _deferred() callback.
The functionality is enabled for pseries (although it isn't platform
specific, and may be used by cxl).
Details on not-so-elegant design choices:
- Use 'pci_host_bridge.release_data' field as pointer to associated
'struct pci_controller' so *not* to 'pci_bus_to_host(bridge->bus)'
in pcibios_free_controller_deferred().
That's because pci_remove_root_bus() sets 'host_bridge->bus = NULL'
(so, if the last reference is released after pci_remove_root_bus()
runs, which eventually reaches pcibios_free_controller_deferred(),
that would hit a null pointer dereference).
The cxl/vphb.c code calls pci_remove_root_bus(), and the cxl folks
are interested in this fix.
Test-case #1 (hold references)
# ls -ld /sys/block/sd* | grep -m1 0021:01:00.0
<...> /sys/block/sdaa -> ../devices/pci0021:01/0021:01:00.0/<...>
# ls -ld /sys/block/sd* | grep -m1 0021:01:00.1
<...> /sys/block/sdab -> ../devices/pci0021:01/0021:01:00.1/<...>
# cat >/dev/sdaa & pid1=$!
# cat >/dev/sdab & pid2=$!
# drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r
Validating PHB DLPAR capability...yes.
[ 594.306719] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01
[ 594.306738] pci_hp_remove_devices: Removing 0021:01:00.0...
...
[ 598.236381] pci_hp_remove_devices: Removing 0021:01:00.1...
...
[ 611.972077] pci_bus 0021:01: busn_res: [bus 01-ff] is released
[ 611.972140] rpadlpar_io: slot PHB 33 removed
# kill -9 $pid1
# kill -9 $pid2
[ 632.918088] pcibios_free_controller_deferred: domain 33, dynamic 1
Test-case #2 (don't hold references)
# drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r
Validating PHB DLPAR capability...yes.
[ 916.357363] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01
[ 916.357386] pci_hp_remove_devices: Removing 0021:01:00.0...
...
[ 920.566527] pci_hp_remove_devices: Removing 0021:01:00.1...
...
[ 933.955873] pci_bus 0021:01: busn_res: [bus 01-ff] is released
[ 933.955977] pcibios_free_controller_deferred: domain 33, dynamic 1
[ 933.955999] rpadlpar_io: slot PHB 33 removed
Suggested-By: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> # cxl
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The field "owner" is set by the core.
Thus delete an unneeded initialisation.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The field "owner" is set by the core.
Thus delete an unneeded initialisation.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Powerpc builds may fail with the following build error.
Error log:
In file included from ./arch/powerpc/include/asm/mmu_context.h:11:0,
from ./include/linux/mmu_context.h:4,
from mm/mmu_context.c:8:
./arch/powerpc/include/asm/cputhreads.h: In function 'get_tensr':
./arch/powerpc/include/asm/cputhreads.h:101:2: error:
implicit declaration of function 'cpu_has_feature'
The problem can be triggered by configuring ppc64e_defconfig and selecting
CONFIG_TICK_CPU_ACCOUNTING instead of CONFIG_VIRT_CPU_ACCOUNTING_NATIVE.
Fixes: b92a226e52 ("powerpc: Move cpu_has_feature() to a separate file")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
When building gccgo in userspace, errno.h gets parsed and the go include file
sysinfo.go is generated.
Since EREFUSED is defined to the same value as ECONNREFUSED, and ECONNREFUSED
is defined later on in errno.h, this leads to go complaining that EREFUSED
isn't defined yet.
Fix this trivial problem by moving the define of EREFUSED down after
ECONNREFUSED in errno.h (and clean up the indenting while touching this line).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Commit 54b6680090 (parisc: Add native high-resolution sched_clock()
implementation) added support to use the CPU-internal cr16 counters as reliable
clocksource with the help of HAVE_UNSTABLE_SCHED_CLOCK.
Sadly the commit missed to remove the hack which prevented cr16 to become the
default clocksource even on SMP systems.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.7+
Some module using div_u64() was failing to link because the libgcc 64-bit
divide assist routine was not being exported for modules
Reported-by: avinashp@quantenna.com
Cc: stable@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| CC mm/memory.o
| In file included from ../mm/memory.c:53:0:
| ../include/linux/pfn_t.h: In function ‘pfn_t_pte’:
| ../include/linux/pfn_t.h:78:2: error: conversion to non-scalar type requested
| return pfn_pte(pfn_t_to_pfn(pfn), pgprot);
With STRICT_MM_TYPECHECKS pte_t is a struct and the offending code
forces a cast which ends up shifting a struct and hence the gcc warning.
Note that in recent past some of the arches (aarch64, s390) made
STRICT_MM_TYPECHECKS default, but we don't for ARC as this leads to slightly
worse generated code, given ARC ABI definition of returning structs
(which pte_t would become)
Quoting from ARC ABI...
"Results of type struct are returned in a caller-supplied temporary
variable whose address is passed in r0.
For such functions, the arguments are shifted so that they are
passed in r1 and up."
So
- struct to be returned would be allocated on stack requiring extra
code at call sites
- callee updates stack memory to facilitate the return (vs. simple
MOV into return reg r0)
Hence STRICT_MM_TYPECHECKS is not enabled by default for ARC
Cc: <stable@vger.kernel.org> #4.4+
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
The syscall ABI includes the gcc functional calling ABI since a syscall
implies userland caller and kernel callee.
The current gcc ABI (v3) for ARCv2 ISA required 64-bit data be passed in
even-odd register pairs, (potentially punching reg holes when passing such
values as args). This was partly driven by the fact that the double-word
LDD/STD instructions in ARCv2 expect the register alignment and thus gcc
forcing this avoids extra MOV at the cost of a few unused register (which we
have plenty anyways).
This however was rejected as part of upstreaming gcc port to HS. So the new
ABI v4 doesn't enforce the even-odd reg restriction.
Do note that for ARCompact ISA builds v3 and v4 are practically the same in
terms of gcc code generation.
In terms of change management, we infer the new ABI if gcc 6.x onwards
is used for building the kernel.
This also needs a stable backport to enable older kernels to work with
new tools/user-space
Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
User mode callee regs are explicitly collected before signal delivery or
breakpoint trap. r25 is special for kernel as it serves as task pointer,
so user mode value is clobbered very early. It is saved in pt_regs where
generally only scratch (aka caller saved) regs are saved.
The code to access the corresponding pt_regs location had a subtle bug as
it was using load/store with scaling of offset, whereas the offset was already
byte wise correct. So fix this by replacing LD.AS with a standard LD
Cc: <stable@vger.kernel.org>
Signed-off-by: Liav Rehana <liavr@mellanox.com>
Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
[vgupta: rewrote title and commit log]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
When mapping a page into the guest we error check using is_error_pfn(),
however this doesn't detect a value of KVM_PFN_NOSLOT, indicating an
error HVA for the page. This can only happen on MIPS right now due to
unusual memslot management (e.g. being moved / removed / resized), or
with an Enhanced Virtual Memory (EVA) configuration where the default
KVM_HVA_ERR_* and kvm_is_error_hva() definitions are unsuitable (fixed
in a later patch). This case will be treated as a pfn of zero, mapping
the first page of physical memory into the guest.
It would appear the MIPS KVM port wasn't updated prior to being merged
(in v3.10) to take commit 81c52c56e2 ("KVM: do not treat noslot pfn as
a error pfn") into account (merged v3.8), which converted a bunch of
is_error_pfn() calls to is_error_noslot_pfn(). Switch to using
is_error_noslot_pfn() instead to catch this case properly.
Fixes: 858dd5d457 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.10.y-
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Couple of DT node ref counting fixes
- Fix __unflatten_device_tree for PPC PCI hotplug case
- Rework marking irq controllers as OF_POPULATED in cases where real
driver is used.
- Disable of_platform_default_populate_init on PPC. The change in
initcall order causes problems which need to be sorted out later.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=s/uZ
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
- a couple of DT node ref counting fixes
- fix __unflatten_device_tree for PPC PCI hotplug case
- rework marking irq controllers as OF_POPULATED in cases where real
driver is used.
- disable of_platform_default_populate_init on PPC. The change in
initcall order causes problems which need to be sorted out later.
* tag 'devicetree-fixes-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: fix reference counting in of_graph_get_endpoint_by_regs
of/platform: disable the of_platform_default_populate_init() for all the ppc boards
ARM: imx6: mark GPC node as not populated after irq init to probe pm domain driver
of/irq: Mark interrupt controllers as populated before initialisation
drivers/of: Validate device node in __unflatten_device_tree()
of: Delete an unnecessary check before the function call "of_node_put"
Pull x86 fixes from Ingo Molnar:
"An initrd microcode loading fix, and an SMP bootup topology setup fix
to resolve crashes on SGI/UV systems if the BIOS is configured in a
certain way"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Fix __max_logical_packages value setup
x86/microcode/AMD: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y
- Avoid a literal load with the MMU off on the CPU resume path
(potential inconsistency between cache and RAM)
- Build error with CONFIG_ACPI=n fixed
- Compiler warning in the arch/arm64/mm/dump.c code fixed
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Z8zz
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Avoid a literal load with the MMU off on the CPU resume path
(potential inconsistency between cache and RAM)
- Build error with CONFIG_ACPI=n fixed
- Compiler warning in the arch/arm64/mm/dump.c code fixed
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix shift warning in arch/arm64/mm/dump.c
arm64: kernel: avoid literal load of virtual address with MMU off
arm64: Fix NUMA build error when !CONFIG_ACPI
Pull ARM fixes from Russell King:
"Only three fixes this time:
- Emil found an overflow problem with the memory layout sanity check.
- Ard Biesheuvel noticed that late-allocated page tables (for EFI)
weren't being properly constructed.
- Guenter Roeck reported a problem found on qemu caused by the recent
addr_limit changes"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: fix address limit restoration for undefined instructions
ARM: 8591/1: mm: use fully constructed struct pages for EFI pgd allocations
ARM: 8590/1: sanity_check_meminfo(): avoid overflow on vmalloc_limit
- Fix a hibernate core regression resulting from uncovering a
latent bug in its implementation of memory bitmaps by a recent
commit (James Morse).
- Use __pa() to compute a physical address in the x86-64 code
finalizing resume from hibernation (Rafael Wysocki).
- Update power management documentation related to system sleep
states to remove outdated information from it and to add a
description of a recently introduced hibernation debug feature
to it (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=GLCW
-----END PGP SIGNATURE-----
Merge tag 'pm-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"More hibernation-related material: one fix for a recent regression in
the core, one small cleanup of the x86-64 resume code and a
documentation update.
Specifics:
- Fix a hibernate core regression resulting from uncovering a latent
bug in its implementation of memory bitmaps by a recent commit
(James Morse).
- Use __pa() to compute a physical address in the x86-64 code
finalizing resume from hibernation (Rafael Wysocki).
- Update power management documentation related to system sleep
states to remove outdated information from it and to add a
description of a recently introduced hibernation debug feature to
it (Rafael Wysocki)"
* tag 'pm-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / hibernate: Fix rtree_next_node() to avoid walking off list ends
x86/power/64: Use __pa() for physical address computation
PM / sleep: Update some system sleep documentation
When building with 48-bit VAs and 16K page configuration, it's possible
to get the following warning when building the arm64 page table dumping
code:
arch/arm64/mm/dump.c: In function ‘walk_pud’:
arch/arm64/mm/dump.c:274:102: warning: right shift count >= width of type [-Wshift-count-overflow]
This is because pud_offset(pgd, 0) performs a shift to the right by 36
while the value 0 has the type 'int' by default, therefore 32-bit.
This patch modifies all the p*_offset() uses in arch/arm64/mm/dump.c to
use 0UL for the address argument.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This tag contains the following fixes on top of v4.8-rc1:
- ITS init issues
- ITS error handling issues
- ITS IRQ leakage fix
- Plug a couple of ITS race conditions
- An erratum workaround for timers
- Some removal of misleading use of errors and comments
- A fix for GICv3 on 32-bit guests
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXtLicAAoJEEtpOizt6ddyEC4H/16IngntN6Gz1WPwtBBelgyj
ZfU970uzGOyDtDOeOX1NT+gJpkDvUMhsNlngWnMrMwqqqPVKdE4XBShPiW2v53E7
JquDTd2kKl+OO9e9XnkLw9yUcARmJFKIjHdISlg+E78t2kcNHn+XB2jrfTLKQVl8
tk1ztDALb4LXSGYPZQ/uHTYp9U0qei+2SbbQufRcdQ3ggyxLDwPP2aO25amctzEP
0Y42tlnNoZj7yBBp0X9BWRrHF2AZuOp+qBJnpFiQdsgLL6G1P3DcU/t9+KDjVBVr
LYKN8jId2r5eyGGg8aKb4I3trevayToWhDw/jzarrTNAovB1cp8G5J7ozfmeS3g=
=4PCW
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-v4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/ARM Fixes for v4.8-rc3
This tag contains the following fixes on top of v4.8-rc1:
- ITS init issues
- ITS error handling issues
- ITS IRQ leakage fix
- Plug a couple of ITS race conditions
- An erratum workaround for timers
- Some removal of misleading use of errors and comments
- A fix for GICv3 on 32-bit guests
When the host supported TSC scaling, L2 would use a TSC multiplier of
0, which causes a VM entry failure. Now L2's TSC uses the same
multiplier as L1.
Signed-off-by: Peter Feiner <pfeiner@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If vmcs12 does not intercept APIC_BASE writes, then KVM will handle the
write with vmcs02 as the current VMCS.
This will incorrectly apply modifications intended for vmcs01 to vmcs02
and L2 can use it to gain access to L0's x2APIC registers by disabling
virtualized x2APIC while using msr bitmap that assumes enabled.
Postpone execution of vmx_set_virtual_x2apic_mode until vmcs01 is the
current VMCS. An alternative solution would temporarily make vmcs01 the
current VMCS, but it requires more care.
Fixes: 8d14695f95 ("x86, apicv: add virtual x2apic support")
Reported-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
msr bitmap can be used to avoid a VM exit (interception) on guest MSR
accesses. In some configurations of VMX controls, the guest can even
directly access host's x2APIC MSRs. See SDM 29.5 VIRTUALIZING MSR-BASED
APIC ACCESSES.
L2 could read all L0's x2APIC MSRs and write TPR, EOI, and SELF_IPI.
To do so, L1 would first trick KVM to disable all possible interceptions
by enabling APICv features and then would turn those features off;
nested_vmx_merge_msr_bitmap() only disabled interceptions, so VMX would
not intercept previously enabled MSRs even though they were not safe
with the new configuration.
Correctly re-enabling interceptions is not enough as a second bug would
still allow L1+L2 to access host's MSRs: msr bitmap was shared for all
VMCSs, so L1 could trigger a race to get the desired combination of msr
bitmap and VMX controls.
This fix allocates a msr bitmap for every L1 VCPU, allows only safe
x2APIC MSRs from L1's msr bitmap, and disables msr bitmaps if they would
have to intercept everything anyway.
Fixes: 3af18d9c5f ("KVM: nVMX: Prepare for using hardware MSR bitmap")
Reported-by: Jim Mattson <jmattson@google.com>
Suggested-by: Wincy Van <fanwenyi0529@gmail.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Frank reported kernel panic when he disabled several cores in BIOS
via following option:
Core Disable Bitmap(Hex) [0]
with number 0xFFE, which leaves 16 CPUs in system (out of 48).
The kernel panic below goes along with following messages:
smpboot: Max logical packages: 2^M
smpboot: APIC(0) Converting physical 0 to logical package 0^M
smpboot: APIC(20) Converting physical 1 to logical package 1^M
smpboot: APIC(40) Package 2 exceeds logical package map^M
smpboot: CPU 8 APICId 40 disabled^M
smpboot: APIC(60) Package 3 exceeds logical package map^M
smpboot: CPU 12 APICId 60 disabled^M
...
general protection fault: 0000 [#1] SMP^M
Modules linked in:^M
CPU: 15 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc5+ #1^M
Hardware name: SGI UV300/UV300, BIOS SGI UV 300 series BIOS 05/25/2016^M
task: ffff8801673e0000 ti: ffff8801673ac000 task.ti: ffff8801673ac000^M
RIP: 0010:[<ffffffff81014d54>] [<ffffffff81014d54>] uncore_change_context+0xd4/0x180^M
...
[<ffffffff810158ac>] uncore_event_init_cpu+0x6c/0x70^M
[<ffffffff81d8c91c>] intel_uncore_init+0x1c2/0x2dd^M
[<ffffffff81d8c75a>] ? uncore_cpu_setup+0x17/0x17^M
[<ffffffff81002190>] do_one_initcall+0x50/0x190^M
[<ffffffff810ab193>] ? parse_args+0x293/0x480^M
[<ffffffff81d87365>] kernel_init_freeable+0x1a5/0x249^M
[<ffffffff81d86a35>] ? set_debug_rodata+0x12/0x12^M
[<ffffffff816dc19e>] kernel_init+0xe/0x110^M
[<ffffffff816e93bf>] ret_from_fork+0x1f/0x40^M
[<ffffffff816dc190>] ? rest_init+0x80/0x80^M
The reason for the panic is wrong value of __max_logical_packages,
which lets logical_package_map uninitialized and the uncore code
relying on this map being properly initialized (maybe we should
add some safety checks there as well).
The __max_logical_packages is computed as:
DIV_ROUND_UP(total_cpus, ncpus);
- ncpus being number of cores
With above BIOS setup we get total_cpus == 16 which set
__max_logical_packages to 2 (ncpus is 12).
Once topology_update_package_map processes CPU with logical
pkg over 2 we display above messages and fail to initialize
the physical_to_logical_pkg map, which makes the uncore code
crash.
The fix is to remove logical_package_map bitmap completely
and keep and update the logical_packages number instead.
After we enumerate all the present CPUs, we check if the
enumerated logical packages count is within its computed
maximum from BIOS data.
If it's not the case, we set this maximum to the new enumerated
value and freeze any new addition of logical packages.
The freeze is because lot of init code like uncore/rapl/cqm
depends on having maximum logical package value set to allocate
their data, so we can't change it later on.
Prarit Bhargava tested the patch and confirms that it solves
the problem:
From dmidecode:
Core Count: 24
Core Enabled: 24
Thread Count: 48
Orig kernel boot log:
[ 0.464981] smpboot: Max logical packages: 19
[ 0.469861] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.477261] smpboot: APIC(40) Converting physical 1 to logical package 1
[ 0.484760] smpboot: APIC(80) Converting physical 2 to logical package 2
[ 0.492258] smpboot: APIC(c0) Converting physical 3 to logical package 3
1. nr_cpus=8, should stop enumerating in package 0:
[ 0.533664] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.539596] smpboot: Max logical packages: 19
2. max_cpus=8, should still enumerate all packages:
[ 0.526494] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.532428] smpboot: APIC(40) Converting physical 1 to logical package 1
[ 0.538456] smpboot: APIC(80) Converting physical 2 to logical package 2
[ 0.544486] smpboot: APIC(c0) Converting physical 3 to logical package 3
[ 0.550524] smpboot: Max logical packages: 19
3. nr_cpus=49 ( 2 socket + 1 core on 3rd socket), should stop enumerating in
package 2:
[ 0.521378] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.527314] smpboot: APIC(40) Converting physical 1 to logical package 1
[ 0.533345] smpboot: APIC(80) Converting physical 2 to logical package 2
[ 0.539368] smpboot: Max logical packages: 19
4. maxcpus=49, should still enumerate all packages:
[ 0.525591] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.531525] smpboot: APIC(40) Converting physical 1 to logical package 1
[ 0.537547] smpboot: APIC(80) Converting physical 2 to logical package 2
[ 0.543579] smpboot: APIC(c0) Converting physical 3 to logical package 3
[ 0.549624] smpboot: Max logical packages: 19
5. kdump (nr_cpus=1) works as well.
Reported-by: Frank Ramsay <framsay@redhat.com>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160815101700.GA30090@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Similar to:
efaad554b4 ("x86/microcode/intel: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y")
... fix microcode loading from the initrd on AMD by adding the
randomization offset to the microcode patch container within the initrd.
Reported-and-tested-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tip-commits@vger.kernel.org
Link: http://lkml.kernel.org/r/20160817113314.GA19221@nazgul.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
* pm-sleep:
PM / hibernate: Fix rtree_next_node() to avoid walking off list ends
x86/power/64: Use __pa() for physical address computation
PM / sleep: Update some system sleep documentation
Literal loads of virtual addresses are subject to runtime relocation when
CONFIG_RELOCATABLE=y, and given that the relocation routines run with the
MMU and caches enabled, literal loads of relocated values performed with
the MMU off are not guaranteed to return the latest value unless the
memory covering the literal is cleaned to the PoC explicitly.
So defer the literal load until after the MMU has been enabled, just like
we do for primary_switch() and secondary_switch() in head.S.
Fixes: 1e48ef7fcc ("arm64: add support for building vmlinux as a relocatable PIE binary")
Cc: <stable@vger.kernel.org> # 4.6+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Since asm/acpi.h is only included by linux/acpi.h when CONFIG_ACPI is
enabled, disabling the latter leads to the following build error on
arm64:
arch/arm64/mm/numa.c: In function ‘arm64_numa_init’:
arch/arm64/mm/numa.c:395:24: error: ‘arm64_acpi_numa_init’ undeclared (first use in this function)
if (!acpi_disabled && !numa_init(arm64_acpi_numa_init))
This patch include the asm/acpi.h explicitly in arch/arm64/mm/numa.c for
the arm64_acpi_numa_init() definition.
Fixes: d8b47fca8c ("arm64, ACPI, NUMA: NUMA support based on SRAT and SLIT")
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
At imx6ul_init_machine, it calls imx6ul_pm_init which needs to find
platform device for ocram, but the default populate platform device is at
of_platform_default_populate_init, which is located at arch_initcall_sync,
and called later than arch_initcall (.init_machine is located at that).
So below warning message will be showed during boots up:
imx6q_suspend_init: failed to find ocram device!
imx6_pm_common_init: No DDR LPM support with suspend -19!
Due to lack of ocram device, the suspend mode "mem" which needs ocram to
store suspend routine code is invalid.
This commit populates platform device before imx6ul_pm_init like other
imx6 platforms do, and the suspend mode "mem" can work successfully.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Fixes: 850bea2335 ("arm: Remove unnecessary of_platform_populate with default match table")
Cc: Anson Huang <anson.huang@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
After commit b34f2bc ("arm64: KVM: Make ICC_SRE_EL1 access return the
configured SRE value") we report SRE value to 64-bit guest, but 32-bit
one still handled as RAZ/WI what leads to funny promise we do not keep:
"GICv3: GIC: unable to set SRE (disabled at EL2), panic ahead"
Instead, return the actual value of the ICC_SRE_EL1 register that the
guest should see.
[ Tweaked commit message - Christoffer ]
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Comment about how PMU access is handled is not relavant since v4.6
where proper PMU support was added in.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
We already have a workaround for Cortex-A57 erratum #852523,
but Cortex-A72 r0p0 to r0p2 do suffer from the same issue
(known as erratum #853709).
Let's document the fact that we already handle this.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
When converting a gfn to a pfn, we call gfn_to_pfn_prot, which returns
various kinds of error values. It turns out that is_error_pfn() only
returns true when the gfn was found in a memory slot and could somehow
not be used, but it does not return true if the gfn does not belong to
any memory slot.
Change use to is_error_noslot_pfn() which covers both cases.
Note: Since we already check for kvm_is_error_hva(hva) explicitly in the
caller of this function while holding the kvm->srcu lock protecting the
memory slots, this should never be a problem, but nevertheless this
change is warranted as it shows the intention of the code.
Reported-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Pull s390 fixes from Martin Schwidefsky:
"A couple of bug fixes, minor cleanup and a change to the default
config"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: fix failing CUIR assignment under LPAR
s390/pageattr: handle numpages parameter correctly
s390/dasd: fix hanging device after clear subchannel
s390/qdio: avoid reschedule of outbound tasklet once killed
s390/qdio: remove checks for ccw device internal state
s390/qdio: fix double return code evaluation
s390/qdio: get rid of spin_lock_irqsave usage
s390/cio: remove subchannel_id from ccw_device_private
s390/qdio: obtain subchannel_id via ccw_device_get_schid()
s390/cio: stop using subchannel_id from ccw_device_private
s390/config: make the vector optimized crc function builtin
s390/lib: fix memcmp and strstr
s390/crc32-vx: Fix checksum calculation for small sizes
s390: clarify compressed image code path
1. fix ctx pointer
Use req_ctx which is the ctx for the next job that have
been completed in the lanes instead of the first
completed job rctx, whose completion could have been
called and released.
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. fix ctx pointer
Use req_ctx which is the ctx for the next job that have
been completed in the lanes instead of the first
completed job rctx, whose completion could have been
called and released.
2. fix digest copy
Use XMM register to copy another 16 bytes sha256 digest
instead of a regular register.
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The value of temp_level4_pgt is the physical address of the
top-level page directory, so use __pa() to compute it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
This fix was applied to a bunch of omap3 devices including LogicPD
Torpedo, but this got missed since it was new around the same times
the patches were applied. This makes the GPMC parameters match the
Torpedo since they have the same processor PoP memory.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This was applied to a variety of omap3 boards, so it should
probably be applied here. I did not test NAND performance, but
I tested this with UBI to confirm read/write didn't break.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The gpmc ranges property for NAND at CS0 was being overridden by later
includes that defined gpmc ethernet nodes, effectively breaking NAND on
these systems:
omap-gpmc 6e000000.gpmc: /ocp/gpmc@6e000000/nand@0,0 has
malformed 'reg' property
Instead of redefining the NAND range in every such dtsi, define all
currently used ranges in omap3-overo-base.dtsi.
Fixes: 98ce6007ef ("ARM: dts: overo: Support PoP NAND")
Cc: stable <stable@vger.kernel.org> # 4.3
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The gpmc ranges property for NAND at CS0 has been broken since it was
first added.
This currently prevents the nand gpmc child node from being probed:
omap-gpmc 6e000000.gpmc: /ocp/gpmc@6e000000/nand@0,0 has
malformed 'reg' property
and consequently the NAND device from being registered.
Fixes: 98ce6007ef ("ARM: dts: overo: Support PoP NAND")
Cc: stable <stable@vger.kernel.org> # 4.3
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The check for the "elm_id" binding had been removed.
This causes nand boot to fail on boards still using
the old binding. Update the bindings on those boards.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There is a missing BM_CLPCR_BYP_MMDC_CH0_LPM_HS setting for imx6ul,
without it, the "standby" mode can't work well, the system can't be
resumed.
With this commit, the "standby" mode works well.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Cc: Anson Huang <anson.huang@nxp.com>
Cc: <stable@vger.kernel.org>
Fixes: ee4a5f838c ("ARM: imx: add suspend/resume support for i.mx6ul")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull m68knommu fix from Greg Ungerer:
"This contains only a single fix for a register corruption problem on
certain types of m68k flat format binaries"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: fix user a5 register being overwritten
Two patches to fix h8300 and unicore32 builds.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=PaA7
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull h8300 and unicore32 architecture fixes from Guenter Roeck:
"Two patches to fix h8300 and unicore32 builds.
unicore32 builds have been broken since v4.6. The fix has been
available in -next since March of this year.
h8300 builds have been broken since the last commit window. The fix
has been available in -next since June of this year"
* tag 'fixes-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
h8300: Add missing include file to asm/io.h
unicore32: mm: Add missing parameter to arch_vma_access_permitted
PPC splits debugfs initialization from creation of the xics device to
unlock the newly taken kvm lock earlier.
s390 prevents userspace from triggering two WARN_ON_ONCE.
MIPS fixes several issues in the management of TLB faults (Cc: stable).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXrx2ZAAoJEED/6hsPKofoo/4H/jra5NNxvpo09LWlXTwGXxBH
cwcfDZSiOFxgvWztKJOIjPI4ETL3mnZvb9SFWBZZh1U0kfZ/TGiWouwaDNlBkPYj
I3YHuPI7if+yUOmJlI3N2hWa0Wo0qiMqIjKT0pQVSLLdK/CVE+xGyS+qtXTNXHQn
pFdKlYr//7OwQEY0ow1yj5VnsFrXB1JWFyB/+N5zaCfbCaQVyZAL7rj8SUbC/32W
CiNhrvatzierKIfPerWw8DvvBKhCgWaRuLl0W+uMncrC9Qepcx9moM2beD1txK2I
iHor1TDxUPifGQONfWMAlw87FluzHF4vQ5nN2jyTi8TT+CEfZpZ43Q+DY7okD4w=
=NQP9
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"KVM:
- lock kvm_device list to prevent corruption on device creation.
PPC:
- split debugfs initialization from creation of the xics device to
unlock the newly taken kvm lock earlier.
s390:
- prevent userspace from triggering two WARN_ON_ONCE.
MIPS:
- fix several issues in the management of TLB faults (Cc: stable)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
MIPS: KVM: Propagate kseg0/mapped tlb fault errors
MIPS: KVM: Fix gfn range check in kseg0 tlb faults
MIPS: KVM: Add missing gfn range check
MIPS: KVM: Fix mapped fault broken commpage handling
KVM: Protect device ops->create and list_add with kvm->lock
KVM: PPC: Move xics_debugfs_init out of create
KVM: s390: reset KVM_REQ_MMU_RELOAD if mapping the prefix failed
KVM: s390: set the prefix initially properly
h8300 builds fail with
arch/h8300/include/asm/io.h:9:15: error: unknown type name ‘u8’
arch/h8300/include/asm/io.h:15:15: error: unknown type name ‘u16’
arch/h8300/include/asm/io.h:21:15: error: unknown type name ‘u32’
and many related errors.
Fixes: 23c82d41bdf4 ("kexec-allow-architectures-to-override-boot-mapping-fix")
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
unicore32 fails to compile with the following errors.
mm/memory.c: In function ‘__handle_mm_fault’:
mm/memory.c:3381: error:
too many arguments to function ‘arch_vma_access_permitted’
mm/gup.c: In function ‘check_vma_flags’:
mm/gup.c:456: error:
too many arguments to function ‘arch_vma_access_permitted’
mm/gup.c: In function ‘vma_permits_fault’:
mm/gup.c:640: error:
too many arguments to function ‘arch_vma_access_permitted’
Fixes: d61172b4b6 ("mm/core, x86/mm/pkeys: Differentiate instruction fetches")
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
- Fix the x86 identity mapping creation helpers to avoid the
assumption that the base address of the mapping will always be
aligned at the PGD level, as it may be aligned at the PUD level
if address space randomization is enabled (Rafael Wysocki).
- Fix the hibernation core to avoid executing tracing functions
before restoring the processor state completely during resume
(Thomas Garnier).
- Fix a recently introduced regression in the powernv cpufreq
driver that causes it to crash due to an out-of-bounds array
access (Akshay Adiga).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=DWxX
-----END PGP SIGNATURE-----
Merge tag 'pm-4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Two hibernation fixes allowing it to work with the recently added
randomization of the kernel identity mapping base on x86-64 and one
cpufreq driver regression fix.
Specifics:
- Fix the x86 identity mapping creation helpers to avoid the
assumption that the base address of the mapping will always be
aligned at the PGD level, as it may be aligned at the PUD level if
address space randomization is enabled (Rafael Wysocki).
- Fix the hibernation core to avoid executing tracing functions
before restoring the processor state completely during resume
(Thomas Garnier).
- Fix a recently introduced regression in the powernv cpufreq driver
that causes it to crash due to an out-of-bounds array access
(Akshay Adiga)"
* tag 'pm-4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / hibernate: Restore processor state before using per-CPU variables
x86/power/64: Always create temporary identity mapping correctly
cpufreq: powernv: Fix crash in gpstate_timer_handler()
Pull x86 fixes from Ingo Molnar:
"This is bigger than usual - the reason is partly a pent-up stream of
fixes after the merge window and partly accidental. The fixes are:
- five patches to fix a boot failure on Andy Lutomirsky's laptop
- four SGI UV platform fixes
- KASAN fix
- warning fix
- documentation update
- swap entry definition fix
- pkeys fix
- irq stats fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic/x2apic, smp/hotplug: Don't use before alloc in x2apic_cluster_probe()
x86/efi: Allocate a trampoline if needed in efi_free_boot_services()
x86/boot: Rework reserve_real_mode() to allow multiple tries
x86/boot: Defer setup_real_mode() to early_initcall time
x86/boot: Synchronize trampoline_cr4_features and mmu_cr4_features directly
x86/boot: Run reserve_bios_regions() after we initialize the memory map
x86/irq: Do not substract irq_tlb_count from irq_call_count
x86/mm: Fix swap entry comment and macro
x86/mm/kaslr: Fix -Wformat-security warning
x86/mm/pkeys: Fix compact mode by removing protection keys' XSAVE buffer manipulation
x86/build: Reduce the W=1 warnings noise when compiling x86 syscall tables
x86/platform/UV: Fix kernel panic running RHEL kdump kernel on UV systems
x86/platform/UV: Fix problem with UV4 BIOS providing incorrect PXM values
x86/platform/UV: Fix bug with iounmap() of the UV4 EFI System Table causing a crash
x86/platform/UV: Fix problem with UV4 Socket IDs not being contiguous
x86/entry: Clarify the RF saving/restoring situation with SYSCALL/SYSRET
x86/mm: Disable preemption during CR3 read+write
x86/mm/KASLR: Increase BRK pages for KASLR memory randomization
x86/mm/KASLR: Fix physical memory calculation on KASLR memory randomization
x86, kasan, ftrace: Put APIC interrupt handlers into .irqentry.text
Pull timer fixes from Ingo Molnar:
"Misc fixes: a /dev/rtc regression fix, two APIC timer period
calibration fixes, an ARM clocksource driver fix and a NOHZ
power use regression fix"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hpet: Fix /dev/rtc breakage caused by RTC cleanup
x86/timers/apic: Inform TSC deadline clockevent device about recalibration
x86/timers/apic: Fix imprecise timer interrupts by eliminating TSC clockevents frequency roundoff error
timers: Fix get_next_timer_interrupt() computation
clocksource/arm_arch_timer: Force per-CPU interrupt to be level-triggered
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, plus two uncore-PMU fixes, an uprobes fix, a
perf-cgroups fix and an AUX events fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add enable_box for client MSR uncore
perf/x86/intel/uncore: Fix uncore num_counters
uprobes/x86: Fix RIP-relative handling of EVEX-encoded instructions
perf/core: Set cgroup in CPU contexts for new cgroup events
perf/core: Fix sideband list-iteration vs. event ordering NULL pointer deference crash
perf probe ppc64le: Fix probe location when using DWARF
perf probe: Add function to post process kernel trace events
tools: Sync cpufeatures headers with the kernel
toops: Sync tools/include/uapi/linux/bpf.h with the kernel
tools: Sync cpufeatures.h and vmx.h with the kernel
perf probe: Support signedness casting
perf stat: Avoid skew when reading events
perf probe: Fix module name matching
perf probe: Adjust map->reloc offset when finding kernel symbol from map
perf hists: Trim libtraceevent trace_seq buffers
perf script: Add 'bpf-output' field to usage message
Pull EFI fixes from Ingo Molnar:
"A fix for EFI capsules and an SGI UV platform fix"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/capsule: Allocate whole capsule into virtual memory
x86/platform/uv: Skip UV runtime services mapping in the efi_runtime_disabled case
- powerpc/vdso: Fix build rules to rebuild vdsos correctly from Nicholas Piggin
- powerpc/ptrace: Fix coredump since ptrace TM changes from Cyril Bur
- powerpc/32: Fix csum_partial_copy_generic() from Christophe Leroy
- cxl: Set psl_fir_cntl to production environment value from Frederic Barrat
- powerpc/eeh: Switch to conventional PCI address output in EEH log from Guilherme G. Piccoli
- cxl: Use fixed width predefined types in data structure. from Philippe Bergheaud
- powerpc/vdso: Add missing include file from Guenter Roeck
- powerpc: Fix unused function warning 'lmb_to_memblock' from Alastair D'Silva
- powerpc/powernv/ioda: Fix TCE invalidate to work in real mode again from Alexey Kardashevskiy
- powerpc/cell: Add missing error code in spufs_mkgang() from Dan Carpenter
- crypto: crc32c-vpmsum - Convert to CPU feature based module autoloading from Anton Blanchard
- powerpc/pasemi: Fix coherent_dma_mask for dma engine from Darren Stevens
Benjamin Herrenschmidt:
- powerpc/32: Fix crash during static key init
- powerpc: Update obsolete comment in setup_32.c about early_init()
- powerpc: Print the kernel load address at the end of prom_init()
- powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
- powerpc/xics: Properly set Edge/Level type and enable resend
Mahesh Salgaonkar:
- powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
- powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
- powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
- powerpc/powernv: Load correct TOC pointer while waking up from winkle.
Andrew Donnellan:
- cxl: Fix sparse warnings
- cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests
Michael Ellerman:
- selftests/powerpc: Specify we expect to build with std=gnu99
- powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
- powerpc/pci: Fix endian bug in fixed PHB numbering
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gw2z
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some powerpc fixes for 4.8:
Misc:
- powerpc/vdso: Fix build rules to rebuild vdsos correctly from Nicholas Piggin
- powerpc/ptrace: Fix coredump since ptrace TM changes from Cyril Bur
- powerpc/32: Fix csum_partial_copy_generic() from Christophe Leroy
- cxl: Set psl_fir_cntl to production environment value from Frederic Barrat
- powerpc/eeh: Switch to conventional PCI address output in EEH log from Guilherme G. Piccoli
- cxl: Use fixed width predefined types in data structure. from Philippe Bergheaud
- powerpc/vdso: Add missing include file from Guenter Roeck
- powerpc: Fix unused function warning 'lmb_to_memblock' from Alastair D'Silva
- powerpc/powernv/ioda: Fix TCE invalidate to work in real mode again from Alexey Kardashevskiy
- powerpc/cell: Add missing error code in spufs_mkgang() from Dan Carpenter
- crypto: crc32c-vpmsum - Convert to CPU feature based module autoloading from Anton Blanchard
- powerpc/pasemi: Fix coherent_dma_mask for dma engine from Darren Stevens
Benjamin Herrenschmidt:
- powerpc/32: Fix crash during static key init
- powerpc: Update obsolete comment in setup_32.c about early_init()
- powerpc: Print the kernel load address at the end of prom_init()
- powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
- powerpc/xics: Properly set Edge/Level type and enable resend
Mahesh Salgaonkar:
- powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
- powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
- powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
- powerpc/powernv: Load correct TOC pointer while waking up from winkle.
Andrew Donnellan:
- cxl: Fix sparse warnings
- cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests
Michael Ellerman:
- selftests/powerpc: Specify we expect to build with std=gnu99
- powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
- powerpc/pci: Fix endian bug in fixed PHB numbering"
* tag 'powerpc-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (26 commits)
selftests/powerpc: Specify we expect to build with std=gnu99
powerpc/vdso: Fix build rules to rebuild vdsos correctly
powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
powerpc/32: Fix crash during static key init
powerpc: Update obsolete comment in setup_32.c about early_init()
powerpc: Print the kernel load address at the end of prom_init()
powerpc/ptrace: Fix coredump since ptrace TM changes
powerpc/32: Fix csum_partial_copy_generic()
cxl: Set psl_fir_cntl to production environment value
powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
powerpc/pci: Fix endian bug in fixed PHB numbering
powerpc/eeh: Switch to conventional PCI address output in EEH log
cxl: Fix sparse warnings
cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests
cxl: Use fixed width predefined types in data structure.
powerpc/vdso: Add missing include file
powerpc: Fix unused function warning 'lmb_to_memblock'
powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
...
When CONFIG_LOCALVERSION_AUTO is disabled, the version string is
just a tag name (or with a '+' appended if HEAD is not a tagged
commit).
During the development (and especially when git-bisecting), longer
version string would be helpful to identify the commit we are running.
This is a default y option, so drop the unset to enable it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Enable options commonly needed by popular virtualization
and container applications. Use modules when possible to
avoid too much overhead for users not interested.
- add namespace and cgroup options needed
- add seccomp - optional, but enhances Qemu etc
- bridge, nat, veth, macvtap and multicast for routing
guests and containers
- btfrs and overlayfs modules for container COW backends
- while near it, make fuse a module instead of built-in.
Generated with make saveconfig and dropping unrelated spurious
change hunks while commiting. bloat-o-meter old-vmlinux vmlinux:
add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652)
....
Total: Before=10515408, After=10604060, chg +0.84%
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In create_safe_exec_page(), we create a copy of the hibernate exit text,
along with some page tables to map this via TTBR0. We then install the
new tables in TTBR0.
In swsusp_arch_resume() we call create_safe_exec_page() before trying a
number of operations which may fail (e.g. copying the linear map page
tables). If these fail, we bail out of swsusp_arch_resume() and return
an error code, but leave TTBR0 as-is. Subsequently, the core hibernate
code will call free_basic_memory_bitmaps(), which will free all of the
memory allocations we made, including the page tables installed in
TTBR0.
Thus, we may have TTBR0 pointing at dangling freed memory for some
period of time. If the hibernate attempt was triggered by a user
requesting a hibernate test via the reboot syscall, we may return to
userspace with the clobbered TTBR0 value.
Avoid these issues by reorganising swsusp_arch_resume() such that we
have no failure paths after create_safe_exec_page(). We also add a check
that the zero page allocation succeeded, matching what we have for other
allocations.
Fixes: 82869ac57b ("arm64: kernel: Add support for hibernate/suspend-to-disk")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: James Morse <james.morse@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In create_safe_exec_page we install a set of global mappings in TTBR0,
then subsequently invalidate TLBs. While TTBR0 points at the zero page,
and the TLBs should be free of stale global entries, we may have stale
ASID-tagged entries (e.g. from the EFI runtime services mappings) for
the same VAs. Per the ARM ARM these ASID-tagged entries may conflict
with newly-allocated global entries, and we must follow a
Break-Before-Make approach to avoid issues resulting from this.
This patch reworks create_safe_exec_page to invalidate TLBs while the
zero page is still in place, ensuring that there are no potential
conflicts when the new TTBR0 value is installed. As a single CPU is
online while this code executes, we do not need to perform broadcast TLB
maintenance, and can call local_flush_tlb_all(), which also subsumes
some barriers. The remaining assembly is converted to use write_sysreg()
and isb().
Other than this, we safely manipulate TTBRs in the hibernate dance. The
code we install as part of the new TTBR0 mapping (the hibernated
kernel's swsusp_arch_suspend_exit) installs a zero page into TTBR1,
invalidates TLBs, then installs its preferred value. Upon being restored
to the middle of swsusp_arch_suspend, the new image will call
__cpu_suspend_exit, which will call cpu_uninstall_idmap, installing the
zero page in TTBR0 and invalidating all TLB entries.
Fixes: 82869ac57b ("arm64: kernel: Add support for hibernate/suspend-to-disk")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Executing from a non-executable area gives an ugly message:
lkdtm: Performing direct entry EXEC_RODATA
lkdtm: attempting ok execution at ffff0000084c0e08
lkdtm: attempting bad execution at ffff000008880700
Bad mode in Synchronous Abort handler detected on CPU2, code 0x8400000e -- IABT (current EL)
CPU: 2 PID: 998 Comm: sh Not tainted 4.7.0-rc2+ #13
Hardware name: linux,dummy-virt (DT)
task: ffff800077e35780 ti: ffff800077970000 task.ti: ffff800077970000
PC is at lkdtm_rodata_do_nothing+0x0/0x8
LR is at execute_location+0x74/0x88
The 'IABT (current EL)' indicates the error but it's a bit cryptic
without knowledge of the ARM ARM. There is also no indication of the
specific address which triggered the fault. The increase in kernel
page permissions makes hitting this case more likely as well.
Handling the case in the vectors gives a much more familiar looking
error message:
lkdtm: Performing direct entry EXEC_RODATA
lkdtm: attempting ok execution at ffff0000084c0840
lkdtm: attempting bad execution at ffff000008880680
Unable to handle kernel paging request at virtual address ffff000008880680
pgd = ffff8000089b2000
[ffff000008880680] *pgd=00000000489b4003, *pud=0000000048904003, *pmd=0000000000000000
Internal error: Oops: 8400000e [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 997 Comm: sh Not tainted 4.7.0-rc1+ #24
Hardware name: linux,dummy-virt (DT)
task: ffff800077f9f080 ti: ffff800008a1c000 task.ti: ffff800008a1c000
PC is at lkdtm_rodata_do_nothing+0x0/0x8
LR is at execute_location+0x74/0x88
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Here are two fixes found by fuzzing of the ioctl interface.
Both cases can trigger a WARN_ON_ONCE from user space.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=Qyaq
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux
KVM: s390: Fixes for 4.8 (via kvm/master)
Here are two fixes found by fuzzing of the ioctl interface.
Both cases can trigger a WARN_ON_ONCE from user space.
Propagate errors from kvm_mips_handle_kseg0_tlb_fault() and
kvm_mips_handle_mapped_seg_tlb_fault(), usually triggering an internal
error since they normally indicate the guest accessed bad physical
memory or the commpage in an unexpected way.
Fixes: 858dd5d457 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Fixes: e685c689f3 ("KVM/MIPS32: Privileged instruction/target branch emulation.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.10.x-
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Two consecutive gfns are loaded into host TLB, so ensure the range check
isn't off by one if guest_pmap_npages is odd.
Fixes: 858dd5d457 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.10.x-
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
kvm_mips_handle_mapped_seg_tlb_fault() calculates the guest frame number
based on the guest TLB EntryLo values, however it is not range checked
to ensure it lies within the guest_pmap. If the physical memory the
guest refers to is out of range then dump the guest TLB and emit an
internal error.
Fixes: 858dd5d457 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.10.x-
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
kvm_mips_handle_mapped_seg_tlb_fault() appears to map the guest page at
virtual address 0 to PFN 0 if the guest has created its own mapping
there. The intention is unclear, but it may have been an attempt to
protect the zero page from being mapped to anything but the comm page in
code paths you wouldn't expect from genuine commpage accesses (guest
kernel mode cache instructions on that address, hitting trapping
instructions when executing from that address with a coincidental TLB
eviction during the KVM handling, and guest user mode accesses to that
address).
Fix this to check for mappings exactly at KVM_GUEST_COMMPAGE_ADDR (it
may not be at address 0 since commit 42aa12e74e ("MIPS: KVM: Move
commpage so 0x0 is unmapped")), and set the corresponding EntryLo to be
interpreted as 0 (invalid).
Fixes: 858dd5d457 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.10.x-
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
KVM devices were manipulating list data structures without any form of
synchronization, and some implementations of the create operations also
suffered from a lack of synchronization.
Now when we've split the xics create operation into create and init, we
can hold the kvm->lock mutex while calling the create operation and when
manipulating the devices list.
The error path in the generic code gets slightly ugly because we have to
take the mutex again and delete the device from the list, but holding
the mutex during anon_inode_getfd or releasing/locking the mutex in the
common non-error path seemed wrong.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
As we are about to hold the kvm->lock during the create operation on KVM
devices, we should move the call to xics_debugfs_init into its own
function, since holding a mutex over extended amounts of time might not
be a good idea.
Introduce an init operation on the kvm_device_ops struct which cannot
fail and call this, if configured, after the device has been created.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
When triggering KVM_RUN without a user memory region being mapped
(KVM_SET_USER_MEMORY_REGION) a validity intercept occurs. This could
happen, if the user memory region was not mapped initially or if it
was unmapped after the vcpu is initialized. The function
kvm_s390_handle_requests checks for the KVM_REQ_MMU_RELOAD bit. The
check function always clears this bit. If gmap_mprotect_notify
returns an error code, the mapping failed, but the KVM_REQ_MMU_RELOAD
was not set anymore. So the next time kvm_s390_handle_requests is
called, the execution would fall trough the check for
KVM_REQ_MMU_RELOAD. The bit needs to be resetted, if
gmap_mprotect_notify returns an error code. Resetting the bit with
kvm_make_request(KVM_REQ_MMU_RELOAD, vcpu) fixes the bug.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Julius Niedworok <jniedwor@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When KVM_RUN is triggered on a VCPU without an initial reset, a
validity intercept occurs.
Setting the prefix will set the KVM_REQ_MMU_RELOAD bit initially,
thus preventing the bug.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Julius Niedworok <jniedwor@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
