The configuration/command below is failing when the VF in the xml
file is already bound to the host iavf driver.
pci_0000_af_0_0.xml:
<interface type='hostdev' managed='yes'>
<source>
<address type='pci' domain='0x0000' bus='0xaf' slot='0x0' function='0x0'/>
</source>
<mac address='00🇩🇪ad:00:11:01'/>
</interface>
> virsh attach-device domain_name pci_0000_af_0_0.xml
error: Failed to attach device from pci_0000_af_0_0.xml
error: Cannot set interface MAC/vlanid to 00🇩🇪ad:00:11:01/0 for
ifname ens1f1 vf 0: Device or resource busy
This is failing because the VF has not been completely removed/reset
after being unbound (via the virsh command above) from the host iavf
driver and ice_set_vf_mac() checks if the VF is disabled before waiting
for the reset to finish.
Fix this by waiting for the VF remove/reset process to happen before
checking if the VF is disabled. Also, since many functions for VF
administration on the PF were more or less calling the same 3 functions
(ice_wait_on_vf_reset(), ice_is_vf_disabled(), and ice_check_vf_init())
move these into the helper function ice_check_vf_ready_for_cfg(). Then
call this function in any flow that attempts to configure/query a VF
from the PF.
Lastly, increase the maximum wait time in ice_wait_on_vf_reset() to
800ms, and modify/add the #define(s) that determine the wait time.
This was done for robustness because in rare/stress cases VF removal can
take a max of ~800ms and previously the wait was a max of ~300ms.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Remove code that tell the OS that link is going down when user
change flow control via ethtool. When link is up it isn't certain
that link goes down after 0x0605 aq command. If link doesn't go
down, OS thinks that link is down, but physical link is up. To
reset this state user have to take interface down and up.
If link goes down after 0x0605 command, FW send information
about that and after that driver tells the OS that the link goes
down. So this code in ethtool is unnecessary.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently if a user sets an odd [tx|rx]-usecs value through ethtool,
the request is denied because the hardware is set to have an ITR
granularity of 2us. This caused poor customer experience. Fix this by
aligning to a register allowed value, which results in rounding down.
Also, print a once per ring container type message to be clear about
our intentions.
Also, change the ITR_TO_REG define to be the bitwise and of the ITR
setting and the ICE_ITR_MASK. This makes the purpose of ITR_TO_REG more
obvious.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
list_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PN544 driver checks the "enable" polarity during of driver's probe and
it's doing that by turning ON and OFF NFC with different polarities until
enabling succeeds. It takes some time for the hardware to power-down, and
thus, to deassert the IRQ that is raised by turning ON the hardware.
Since the delay after last power-down of the polarity-checking process is
missed in the code, the interrupt may trigger immediately after installing
the IRQ handler (right after the checking is done), which results in IRQ
handler trying to touch the disabled HW and ends with marking NFC as
'DEAD' during of the driver's probe:
pn544_hci_i2c 1-002a: NFC: nfc_en polarity : active high
pn544_hci_i2c 1-002a: NFC: invalid len byte
shdlc: llc_shdlc_recv_frame: NULL Frame -> link is dead
This patch fixes the occasional NFC initialization failure on Nexus 7
device.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit
aaf248848d ("perf/x86/msr: Add AMD IRPERF (Instructions Retired)
performance counter")
added support for access to the free-running counter via 'perf -e
msr/irperf/', but when exercised, it always returns a 0 count:
BEFORE:
$ perf stat -e instructions,msr/irperf/ true
Performance counter stats for 'true':
624,833 instructions
0 msr/irperf/
Simply set its enable bit - HWCR bit 30 - to make it start counting.
Enablement is restricted to all machines advertising IRPERF capability,
except those susceptible to an erratum that makes the IRPERF return
bad values.
That erratum occurs in Family 17h models 00-1fh [1], but not in F17h
models 20h and above [2].
AFTER (on a family 17h model 31h machine):
$ perf stat -e instructions,msr/irperf/ true
Performance counter stats for 'true':
621,690 instructions
622,490 msr/irperf/
[1] Revision Guide for AMD Family 17h Models 00h-0Fh Processors
[2] Revision Guide for AMD Family 17h Models 30h-3Fh Processors
The revision guides are available from the bugzilla Link below.
[ bp: Massage commit message. ]
Fixes: aaf248848d ("perf/x86/msr: Add AMD IRPERF (Instructions Retired) performance counter")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Link: http://lkml.kernel.org/r/20200214201805.13830-1-kim.phillips@amd.com
node_db is traversed using list_for_each_entry_rcu
outside an RCU read-side critical section but under the protection
of hsr->list_lock.
Hence, add corresponding lockdep expression to silence false-positive
warnings, and harden RCU lists.
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl5MpQAACgkQSD+KveBX
+j7kcwgAtUPPpulo9AqMjk+2dJ67lT+GKl4JlrQR2kFs9o0j5vO8apixckqBGXyV
wHTHLR79T710T1LD2mdIPFwFE5ecXKQL3mVrYMcyPCdkntZnNK7K3LpRWOo0t3yf
JBeQoN+VuCXFAsyuQ39W+cr0+i4tO8DQ9kBj7usLu/8apuyo3KzA/3uLFE69zZeb
vC7Cc+TcSWeiDvgCZGFRYtoRBvV2+AcyDNjY3Kaz6Yl+hgu53pGJfJWgV+lCxxr8
vavJJgQQeAjFX52QttiXQBsvkfX+cqNfzVc/W9tI5rq5C0qmH4yGndrTOwsvCFen
Q+5pbP6KYNX6X7urHfuJ25q5/mUkeA==
=xZyi
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2020-02-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2020-02-18
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
For -stable v5.3
('net/mlx5: Fix sleep while atomic in mlx5_eswitch_get_vepa')
For -stable v5.4
('net/mlx5: DR, Fix matching on vport gvmi')
('net/mlx5e: Fix crash in recovery flow without devlink reporter')
For -stable v5.5
('net/mlx5e: Reset RQ doorbell counter before moving RQ state from RST to RDY')
('net/mlx5e: Don't clear the whole vf config when switching modes')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Including:
- Compile warning fix for the Intel IOMMU driver
- Fix kdump boot with Intel IOMMU enabled and in passthrough
mode
- Disable AMD IOMMU on a Laptop/Embedded platform because the
delay in introduces in DMA transactions causes screen
flickering there with 4k monitors
- Make domain_free function in QCOM IOMMU driver robust and not
leak memory/dereference NULL pointers
- Fix ARM-SMMU module parameter prefix names
-----BEGIN PGP SIGNATURE-----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=DUFi
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Compile warning fix for the Intel IOMMU driver
- Fix kdump boot with Intel IOMMU enabled and in passthrough mode
- Disable AMD IOMMU on a Laptop/Embedded platform because the delay it
introduces in DMA transactions causes screen flickering there with 4k
monitors
- Make domain_free function in QCOM IOMMU driver robust and not leak
memory/dereference NULL pointers
- Fix ARM-SMMU module parameter prefix names
* tag 'iommu-fixes-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/arm-smmu: Restore naming of driver parameter prefix
iommu/qcom: Fix bogus detach logic
iommu/amd: Disable IOMMU on Stoney Ridge systems
iommu/vt-d: Simplify check in identity_mapping()
iommu/vt-d: Remove deferred_attach_domain()
iommu/vt-d: Do deferred attachment in iommu_need_mapping()
iommu/vt-d: Move deferred device attachment into helper function
iommu/vt-d: Add attach_deferred() helper
iommu/vt-d: Fix compile warning from intel-svm.h
The only largish change in this pull request is about the revert
of the recent max98090 and its relevant patches due to regressions.
Other than that, all small fixes for ALSA core (covering KCSAN
fuzzer warnings in ALSA sequencer and rawmidi), Intel SOF HD-audio
fixes, AMD ACP fixes, usual HD-audio quirks, and various ASoC fixes.
-----BEGIN PGP SIGNATURE-----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=6Ce7
-----END PGP SIGNATURE-----
Merge tag 'sound-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only largish change in this pull request is about the revert of
the recent max98090 and its relevant patches due to regressions.
Other than that, all small fixes for ALSA core (covering KCSAN fuzzer
warnings in ALSA sequencer and rawmidi), Intel SOF HD-audio fixes, AMD
ACP fixes, usual HD-audio quirks, and various ASoC fixes"
* tag 'sound-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: Use scnprintf() for printing texts for sysfs/procfs
ALSA: hda/realtek - Apply quirk for yet another MSI laptop
ASoC: sun8i-codec: Fix setting DAI data format
ALSA: hda/realtek - Apply quirk for MSI GP63, too
ASoC: amd: ACP needs to be powered off in BIOS.
ASoC: hdmi-codec: set plugged_cb to NULL when component removing
ASoC: dapm: remove snd_soc_dapm_put_enum_double_locked
ASoC: max98090: revert invalid fix for handling SHDN
ALSA: rawmidi: Avoid bit fields for state flags
ALSA: seq: Fix concurrent access to queue current tick/time
ALSA: seq: Avoid concurrent access to queue flags
ASoC: codec2codec: avoid invalid/double-free of pcm runtime
ASoC: amd: Buffer Size instead of MAX Buffer
ASoC: SOF: Intel: hda: move i915 init earlier
ASoC: SOF: Intel: hda: fix ordering bug in resume flow
ALSA: hda: do not override bus codec_mask in link_get()
ASoC: atmel: fix atmel_ssc_set_audio link failure
ASoC: fsl_sai: Fix exiting path on probing failure
gcc may detect a false positive on nvme using an unintialized variable
if setting features fails. Since this is not a fast path, explicitly
initialize this variable to suppress the warning.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
sbale->addr holds an absolute address (or for some FCP usage, an opaque
request ID), and should only be used with proper virt/phys translation.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
As the comment says, sl->sbal holds an absolute address. qeth currently
solves this through wild casting, while zfcp doesn't care.
Handle this properly in the code that actually builds the SL.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com> [for qdio]
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
GCC 10 changed the default to -fno-common, which leads to
LD arch/x86/boot/compressed/vmlinux
ld: arch/x86/boot/compressed/pgtable_64.o:(.bss+0x0): multiple definition of `__force_order'; \
arch/x86/boot/compressed/kaslr_64.o:(.bss+0x0): first defined here
make[2]: *** [arch/x86/boot/compressed/Makefile:119: arch/x86/boot/compressed/vmlinux] Error 1
Since __force_order is already provided in pgtable_64.c, there is no
need to declare __force_order in kaslr_64.c.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200124181811.4780-1-hjl.tools@gmail.com
Use the existence of the workqueue itself to determine when to
enable HDCP features rather than sprinkling asic checks all over
the code. Also add a check for the existence of the hdcp
workqueue in the irq handling on the off chance we get and HPD
RX interrupt with the CP bit set. This avoids a crash if
the driver doesn't support HDCP for a particular asic.
Fixes: 96a3b32e67 ("drm/amd/display: only enable HDCP for DCN+")
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206519
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The rlc version of raven_kicer_rlc is different from the legacy rlc
version of raven_rlc. So it needs to add a judgement function for
raven_kicer_rlc and avoid disable GFXOFF when loading raven_kicer_rlc.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
People reported that old Apple machines are not working properly
if the non-first IRQ vector is in use.
Set quirk for that models to limit IRQ to use first vector only.
Based on original patch by GitHub user npx001.
Link: https://github.com/Dunedan/mbp-2016-linux/issues/9
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Leif Liddy <leif.liddy@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The Samsung SSD SM981/PM981 and Toshiba SSD KBG40ZNT256G on the Lenovo
C640 platform experience runtime resume issues when the SSDs are kept in
sleep/suspend mode for long time.
This patch applies the 'Simple Suspend' quirk to these configurations.
With this patch, the issue had not been observed in a 1+ day test.
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shyjumon N <shyjumon.n@intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Add brackets around the evaluation of the 'addr' parameter to the
untagged_addr() macro so that the cast to 'u64' applies to the result
of the expression.
Cc: <stable@vger.kernel.org>
Fixes: 597399d0cb ("arm64: tags: Preserve tags for addresses translated via TTBR1")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will@kernel.org>
s390 math emulation was removed with commit 5a79859ae0 ("s390:
remove 31 bit support"), rendering ieee_emulation_warnings useless.
The code still built because it was protected by CONFIG_MATHEMU, which
was no longer selectable.
This patch removes the sysctl_ieee_emulation_warnings declaration and
the sysctl entry declaration.
Link: https://lkml.kernel.org/r/20200214172628.3598516-1-steve@sk2.org
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Extending the Arm SMMU driver to allow for modular builds changed
KBUILD_MODNAME to be "arm_smmu_mod" so that a single module could be
built from the multiple existing object files without the need to rename
any source files.
This inadvertently changed the name of the driver parameters, which may
lead to runtime issues if bootloaders are relying on the old names for
correctness (e.g. "arm-smmu.disable_bypass=0").
Although MODULE_PARAM_PREFIX can be overridden to restore the old naming
for builtin parameters, only the new name is matched by modprobe and so
loading the driver as a module would cause parameters specified on the
kernel command line to be ignored. Instead, rename "arm_smmu_mod" to
"arm_smmu". Whilst it's a bit of a bodge, this allows us to create a
single module without renaming any files and makes use of the fact that
underscores and hyphens can be used interchangeably in parameter names.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Reported-by: Li Yang <leoyang.li@nxp.com>
Fixes: cd221bd24f ("iommu/arm-smmu: Allow building as a module")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, the implementation of qcom_iommu_domain_free() is guaranteed
to do one of two things: WARN() and leak everything, or dereference NULL
and crash. That alone is terrible, but in fact the whole idea of trying
to track the liveness of a domain via the qcom_domain->iommu pointer as
a sanity check is full of fundamentally flawed assumptions. Make things
robust and actually functional by not trying to be quite so clever.
Reported-by: Brian Masney <masneyb@onstation.org>
Tested-by: Brian Masney <masneyb@onstation.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 0ae349a0f3 ("iommu/qcom: Add qcom_iommu")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Serious screen flickering when Stoney Ridge outputs to a 4K monitor.
Use identity-mapping and PCI ATS doesn't help this issue.
According to Alex Deucher, IOMMU isn't enabled on Windows, so let's do
the same here to avoid screen flickering on 4K monitor.
Cc: Alex Deucher <alexander.deucher@amd.com>
Bug: https://gitlab.freedesktop.org/drm/amd/issues/961
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On flow table creation, send the relevant flags according to what the FW
currently supports.
When FW doesn't support reformat option over SW-steering managed table,
the driver shouldn't pass this.
Fixes: 988fd6b32d ("net/mlx5: DR, Pass table flags at creation to lower layer")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The pool sizes represent the pool sizes in the fw. when we request
a pool size from fw, it will return the next possible group.
We track how many pools the fw has left and start requesting groups
from the big to the small.
When we start request 4k group, which doesn't exists in fw, fw
wants to allocate the next possible size, 64k, but will fail since
its exhausted. The correct smallest pool size in fw is 128 and not 4k.
Fixes: 39ac237ce0 ("net/mlx5: E-Switch, Refactor chains and priorities")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
There is no need to reset all vf config (except link state) between
legacy and switchdev modes changes.
Also, set link state to AUTO, when legacy enabled.
Fixes: 3b83b6c2e0 ("net/mlx5e: Clear VF config when switching modes")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Set vport gvmi in the tag, only when source gvmi is set in the bit mask.
Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When health reporters are not supported, recovery function is invoked
directly, not via devlink health reporters.
In this direct flow, the recover function input parameter was passed
incorrectly and is causing a kernel oops. This patch is fixing the input
parameter.
Following call trace is observed on rx error health reporting.
Internal error: Oops: 96000007 [#1] PREEMPT SMP
Process kworker/u16:4 (pid: 4584, stack limit = 0x00000000c9e45703)
Call trace:
mlx5e_rx_reporter_err_rq_cqe_recover+0x30/0x164 [mlx5_core]
mlx5e_health_report+0x60/0x6c [mlx5_core]
mlx5e_reporter_rq_cqe_err+0x6c/0x90 [mlx5_core]
mlx5e_rq_err_cqe_work+0x20/0x2c [mlx5_core]
process_one_work+0x168/0x3d0
worker_thread+0x58/0x3d0
kthread+0x108/0x134
Fixes: c50de4af1d ("net/mlx5e: Generalize tx reporter's functionality")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Initialize RQ doorbell counters to zero prior to moving an RQ from RST
to RDY state. Per HW spec, when RQ is back to RDY state, the descriptor
ID on the completion is reset. The doorbell record must comply.
Fixes: 8276ea1353 ("net/mlx5e: Report and recover from CQE with error on RQ")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reported-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
rtnl_bridge_getlink is protected by rcu lock, so mlx5_eswitch_get_vepa
cannot take mutex lock. Two possible issues can happen:
1. User at the same time change vepa mode via RTM_SETLINK command.
2. User at the same time change the switchdev mode via devlink netlink
interface.
Case 1 cannot happen because rtnl executes one message in order.
Case 2 can happen but we do not expect user to change the switchdev mode
when changing vepa. Even if a user does it, so he will read a value
which is no longer valid.
Fixes: 8da202b249 ("net/mlx5: E-Switch, Add support for VEPA in legacy mode.")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
io_cleanup_req() should be called before req->io is freed, and so
shouldn't be after __io_free_req() -> __io_req_aux_free(). Also,
it will be ignored for in io_free_req_many(), which use
__io_req_aux_free().
Place cleanup_req() into __io_req_aux_free().
Fixes: 99bc4c3853 ("io_uring: fix iovec leaks")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
This batch contains Netfilter fixes for net:
1) Restrict hashlimit size to 1048576, from Cong Wang.
2) Check for offload flags from nf_flow_table_offload_setup(),
this fixes a crash in case the hardware offload is disabled.
From Florian Westphal.
3) Three preparation patches to extend the conntrack clash resolution,
from Florian.
4) Extend clash resolution to deal with DNS packets from the same flow
racing to set up the NAT configuration.
5) Small documentation fix in pipapo, from Stefano Brivio.
6) Remove misleading unlikely() from pipapo_refill(), also from Stefano.
7) Reduce hashlimit mutex scope, from Cong Wang. This patch is actually
triggering another problem, still under discussion, another patch to
fix this will follow up.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In btrfs_wait_ordered_range() once we find an ordered extent that has
finished with an error we exit the loop and don't wait for any other
ordered extents that might be still in progress.
All the users of btrfs_wait_ordered_range() expect that there are no more
ordered extents in progress after that function returns. So past fixes
such like the ones from the two following commits:
ff612ba784 ("btrfs: fix panic during relocation after ENOSPC before
writeback happens")
28aeeac1dd ("Btrfs: fix panic when starting bg cache writeout after
IO error")
don't work when there are multiple ordered extents in the range.
Fix that by making btrfs_wait_ordered_range() wait for all ordered extents
even after it finds one that had an error.
Link: https://github.com/kdave/btrfs-progs/issues/228#issuecomment-569777554
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I hit the following warning while running my error injection stress
testing:
WARNING: CPU: 3 PID: 1453 at fs/btrfs/space-info.h:108 btrfs_free_reserved_data_space_noquota+0xfd/0x160 [btrfs]
RIP: 0010:btrfs_free_reserved_data_space_noquota+0xfd/0x160 [btrfs]
Call Trace:
btrfs_free_reserved_data_space+0x4f/0x70 [btrfs]
__btrfs_prealloc_file_range+0x378/0x470 [btrfs]
elfcorehdr_read+0x40/0x40
? elfcorehdr_read+0x40/0x40
? btrfs_commit_transaction+0xca/0xa50 [btrfs]
? dput+0xb4/0x2a0
? btrfs_log_dentry_safe+0x55/0x70 [btrfs]
? btrfs_sync_file+0x30e/0x420 [btrfs]
? do_fsync+0x38/0x70
? __x64_sys_fdatasync+0x13/0x20
? do_syscall_64+0x5b/0x1b0
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
This happens if we fail to insert our reserved file extent. At this
point we've already converted our reservation from ->bytes_may_use to
->bytes_reserved. However once we break we will attempt to free
everything from [cur_offset, end] from ->bytes_may_use, but our extent
reservation will overlap part of this.
Fix this problem by adding ins.offset (our extent allocation size) to
cur_offset so we remove the actual remaining part from ->bytes_may_use.
I validated this fix using my inject-error.py script
python inject-error.py -o should_fail_bio -t cache_save_setup -t \
__btrfs_prealloc_file_range \
-t insert_reserved_file_extent.constprop.0 \
-r "-5" ./run-fsstress.sh
where run-fsstress.sh simply mounts and runs fsstress on a disk.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we're allocating a logged extent we attempt to insert an extent
record for the file extent directly. We increase
space_info->bytes_reserved, because the extent entry addition will call
btrfs_update_block_group(), which will convert the ->bytes_reserved to
->bytes_used. However if we fail at any point while inserting the
extent entry we will bail and leave space on ->bytes_reserved, which
will trigger a WARN_ON() on umount. Fix this by pinning the space if we
fail to insert, which is what happens in every other failure case that
involves adding the extent entry.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_assert_delayed_root_empty() will check if the delayed root is
completely empty, but this is a filesystem-wide check. On cleanup we
may have allowed other transactions to begin, for whatever reason, and
thus the delayed root is not empty.
So remove this check from cleanup_one_transation(). This however can
stay in btrfs_cleanup_transaction(), because it checks only after all of
the transactions have been properly cleaned up, and thus is valid.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While running my error injection script I hit a panic when we tried to
clean up the fs_root when freeing the fs_root. This is because
fs_info->fs_root == PTR_ERR(-EIO), which isn't great. Fix this by
setting fs_info->fs_root = NULL; if we fail to read the root.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We clean up the delayed references when we abort a transaction but we
leave the pending qgroup extent records behind, leaking memory.
This patch destroys the extent records when we destroy the delayed refs
and makes sure ensure they're gone before releasing the transaction.
Fixes: 3368d001ba ("btrfs: qgroup: Record possible quota-related extent for qgroup.")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
[ Rebased to latest upstream, remove to_qgroup() helper, use
rbtree_postorder_for_each_entry_safe() wrapper ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
- give command line cma= precedence over the CONFIG_ option
(Nicolas Saenz Julienne)
- always allow 32-bit DMA, even for weirdly placed ZONE_DMA
- improve the debug printks when memory is not addressable, to help
find problems with swiotlb initialization
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl5MU2MLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYMITg/6A7iEBPKTR5ugKKHoYiKfg7xrslOHZHHdWh2qXKMf
C+vjeZzIeIWWFWVvCYAfbueSTAPeyfE1qMTwHjBakH1DOIpl2TgtLmBqZT+hb4WJ
Me4a48dNyX5Ngk5e6l4iNfkaa0P0SsbjRyZQyWpXCRDOAdudqmUOrgjA1MJPZrdS
dkzB6RdcKUdUJZ/METQ0+i2knbznMcfHn0WsqPjD8A1OMvgslUg3ky4t1dpfCjC9
hfmwkaWQmfPbW1SKmkuuOXc4im2WI8TeVNJ5N1+qAr91AtEVELTSBToZkEP4FoFj
iTCfwimt77qF3qeD7kIU6WGbFrnEcV9VTWW3YilMFgVUF6f0bW0HZBq4fQdI9HvS
O/aZteZTz5ukp9tJ8gILN1CNuuayJtaRFMeZv+A2+lsI31ITC2GKYsoNAepdwtHq
w1d4OrJciUy92h4VOrGtWFDIyr+tFrwqUjUR1WElz3tvPE4fkaLaK4lzEof7Z5B9
trzUHBmiiFnjAVpEIADEjRHXcNJQPBuWi07UT7ZuJ3bMa+neKUcsSwm3RZf46Kx+
yh45HsmjjHcBmHbbpTS3BGkog44cXB/+hRxtntBOwsvAaP4Ip8SHeyDrMH1Ay6xr
4xZmt9c3kQySgrywjIP//WmQ601HMjPmddkrJj8kZNNE7HxQYQlIyyf9IpEeSxVK
Seg=
=NfNc
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.6' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- give command line cma= precedence over the CONFIG_ option (Nicolas
Saenz Julienne)
- always allow 32-bit DMA, even for weirdly placed ZONE_DMA
- improve the debug printks when memory is not addressable, to help
find problems with swiotlb initialization
* tag 'dma-mapping-5.6' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: improve DMA mask overflow reporting
dma-direct: improve swiotlb error reporting
dma-direct: relax addressability checks in dma_direct_supported
dma-contiguous: CMA: give precedence to cmdline
-----BEGIN PGP SIGNATURE-----
iJYEABYIAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCXkrf7CAcamFya2tvLnNh
a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0v6rAP9dug1d+LmeV3df
8ml5VqIODRh6Vuo5PLceOTD7YG854QD/R2VtY9Oq47CpscBO/6To1dOKadY6cSKm
lybLAzMCpgs=
=FSvH
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-20200217' of git://git.infradead.org/users/jjs/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two bug fixes"
* tag 'tpmdd-next-20200217' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm: Initialize crypto_id of allocated_banks to HASH_ALGO__LAST
tpm: Revert tpm_tis_spi_mod.ko to tpm_tis_spi.ko.
Andrei Vagin reported that commit 0ddad21d3e ("pipe: use exclusive
waits when reading or writing") broke one of the CRIU tests. He even
has a trivial reproducer:
#include <unistd.h>
#include <sys/types.h>
#include <sys/wait.h>
int main()
{
int p[2];
pid_t p1, p2;
int status;
if (pipe(p) == -1)
return 1;
p1 = fork();
if (p1 == 0) {
close(p[1]);
read(p[0], &status, sizeof(status));
return 0;
}
p2 = fork();
if (p2 == 0) {
close(p[1]);
read(p[0], &status, sizeof(status));
return 0;
}
sleep(1);
close(p[1]);
wait(&status);
wait(&status);
return 0;
}
and the problem - once he points it out - is obvious. We use these nice
exclusive waits, but when the last writer goes away, it then needs to
wake up _every_ reader (and conversely, the last reader disappearing
needs to wake every writer, of course).
In fact, when going through this, we had several small oddities around
how to wake things. We did in fact wake every reader when we changed
the size of the pipe buffers. But that's entirely pointless, since that
just acts as a possible source of new space - no new data to read.
And when we change the size of the buffer, we don't need to wake all
writers even when we add space - that case acts just as if somebody made
space by reading, and any writer that finds itself not filling it up
entirely will wake the next one.
On the other hand, on the exit path, we tried to limit the wakeups with
the proper poll keys etc, which is entirely pointless, because at that
point we obviously need to wake up everybody. So don't do that: just
wake up everybody - but only do that if the counts changed to zero.
So fix those non-IO wakeups to be more proper: space change doesn't add
any new data, but it might make room for writers, so it wakes up a
writer. And the actual changes to reader/writer counts should wake up
everybody, since everybody is affected (ie readers will all see EOF if
the writers have gone away, and writers will all get EPIPE if all
readers have gone away).
Fixes: 0ddad21d3e ("pipe: use exclusive waits when reading or writing")
Reported-and-tested-by: Andrei Vagin <avagin@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I originally used unlikely() in the if (match_only) clause, which
we hit on the mapping table for the last field in a set, to ensure
we avoid branching to the rest of for loop body, which is executed
more frequently.
However, Pablo reports, this is confusing as it gives the impression
that this is not a common case, and it's actually not the intended
usage of unlikely().
I couldn't observe any statistical difference in matching rates on
x864_64 and aarch64 without it, so just drop it.
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In both insertion and lookup examples, the two element pointers
of rule mapping tables were swapped. Fix that.
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
hlist_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hlist_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hlist_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hlist_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
list_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
list_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
