The entries in the lux table (als_device_lux) can be updated via sysfs
through the function in_illuminance_lux_table_store(). The last row in
the table must be terminated with values that are zero. The sysfs code
already ensures that the last row is all zeros. The call to memset to
clear out the table is not needed so this patch removes the unnecessary
call.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The comment for tsl2583_probe() does not provide any useful value.
This patch removes the comment.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The comment that describes the code that clears the interrupt bit was
vague and didn't provide much value. This patch adds more detail about
why that bit needs to be cleared.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The header only listed the tsl2580 and tsl2581 devices as supported by
this driver. This patch adds the tsl2583 since it is also supported by
this driver.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The driver contains a global lux table that can be updated via sysfs.
Change this to a per device lux table so that multiple devices can be
hooked up to the same system with different lux tables.
There are 10 entries, plus 1 for the termination segment, set aside for
the entries in the lux table. When updating the lux table via sysfs,
only 9 entries, plus the terminator, could be added. This changes
the code to allow for the 10 entries, plus the terminator.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
in_illuminance_lux_table_store assumes that an unsigned int is 32 bits.
Replace this with sizeof(value[1]).
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
in_illuminance_lux_table_store() contains some unnecessary parentheses.
This patch removes them since they provide no value.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
tsl2583_als_calibrate() returns the newly computed gain_trim if the
calibration was successful. This function is only called by
in_illuminance_calibrate_store() and the return value inside that
sysfs attribute is only checked to see if an error was returned.
This patch changes tsl2583_als_calibrate() to return 0 on success.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The check for ch1lux > ch0lux inside tsl2583_get_lux is only valid if
the ratio is not equal to zero. Move the code block inside the else
statement. This does away with the need to initialize the variables to
zero.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
If channel 0 does not have any data, then the code sets the lux to zero.
The corresponding comment says that the last value is returned. This
updates the comment to correctly reflect what the code does. It also
clarifies the comment about why 0 is returned.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The definition of the tsl2583_device_lux struct has a series of single
line comments. There are two other cases where the multiline comments
did not have an initial blank line. Change these comments to use the
proper multiline syntax.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
There are two separate files describing the tsl2583 sysfs attributes.
Combine the two files into one. Updated the name of the sysfs attributes
to match the current ABI.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Suggested-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add and remove newlines to improve code readability in preparation for
moving the driver out of staging.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fixed warning found by make W=2:
warning: comparison between signed and unsigned integer expressions
[-Wsign-compare]
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Most of the values in the #defines have their values aligned on a single
column, but some do not. This changes the remaining defines to use
consistent alignment with the majority to improve code readability.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Some functions and variables were prefixed with either taos, tsl258x,
taos2583, or tsl2583. Change everything to use the tsl2583 prefix since
that is the name of the .c file. The taos_settings member inside the
taos_settings struct was renamed to als_settings.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
There are several places in the code where the function name is
hardcoded in the log message. Use the __func__ constant string to build
the log message. This also clarifies some of the error messages to match
the code and ensures that the correct priority is used since the message
is already being changed.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Address warning from checkpatch:
CHECK: Do not include the paragraph about writing to the Free Software
Foundation's mailing address from the sample GPL notice. The FSF has
changed addresses in the past, and may do so again. Linux already
includes a copy of the GPL.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
taos_probe() calls i2c_smbus_write_byte() to select the control
register, however there are no subsequent calls to
i2c_smbus_read_byte(). The write call is unnecessary and is removed by
this patch.
Verified that the driver still functions correctly using a TSL2581
hooked up to a Raspberry Pi 2.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The current chip state is represented as a tristate (working, suspended,
and unknown). The unknown state was not used. This patch changes the
chip state so that it is now represented as a single boolean value
(suspended).
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The device probing and the suspend/resume code checks a flag internal to
the driver that determines whether or not the chip is in a working
state. These checks are not needed. This patch removes the unnecessary
checks. It will do no harm to the hardware if the chip is
reinitialized if it is already powered on.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
taos_get_lux checks to see if the chip is in a working state. This
check is not necessary since it is only called from tsl2583_read_raw
and in_illuminance_calibrate_store (via taos_als_calibrate). The chip
state is already checked by these functions.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
in_illuminance_calibrate_store() did not check to see if the chip is
in a working state. This patch adds the proper check. The return value
from taos_als_calibrate() was also not checked in this function, so the
proper check was also added while changes are being made here.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The DAC is used to find the peak level of an alternating voltage input
signal by a binary search using the output of a comparator wired to
an interrupt pin. Like so:
_
| \
input +------>-------|+ \
| \
.-------. | }---.
| | | / |
| dac|-->--|- / |
| | |_/ |
| | |
| | |
| irq|------<-------'
| |
'-------'
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
It is assumed that the dpot is used as a voltage divider between the
current dpot wiper setting and the maximum resistance of the dpot. The
divided voltage is provided by a vref regulator.
.------.
.-----------. | |
| vref |--' .---.
| regulator |--. | |
'-----------' | | d |
| | p |
| | o | wiper
| | t |<---------+
| | |
| '---' dac output voltage
| |
'------+------------+
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Example:
$ cat '/sys/bus/iio/devices/iio:device0/out_resistance_raw_available'
[0 1 256]
Meaning: min 0, step 1 and max 256.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Specifically a helper for reading the available maximum raw value of a
channel and a helper for forwarding read_avail requests for raw values
from one iio driver to an iio channel that is consumed.
These rather specific helpers are in turn built with generic helpers
making it easy to build more helpers for available values as needed.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
A large number of attributes can only take a limited range of values.
Currently in IIO this is handled by directly registering additional
*_available attributes thus providing this information to userspace.
It is desirable to provide this information via the core for much the same
reason this was done for the actual channel information attributes in the
first place. If it isn't there, then it can only really be accessed from
userspace. Other in kernel IIO consumers have no access to what valid
parameters are.
Two forms are currently supported:
* list of values in one particular IIO_VAL_* format.
e.g. 1.300000 1.500000 1.730000
* range specification with a step size:
e.g. [1.000000 0.500000 2.500000]
equivalent to 1.000000 1.5000000 2.000000 2.500000
An addition set of masks are used to allow different sharing rules for the
*_available attributes generated.
This allows for example:
in_accel_x_offset
in_accel_y_offset
in_accel_offset_available.
We could have gone with having a specification for each and every
info_mask element but that would have meant changing the existing userspace
ABI. This approach does not.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
[forward ported, added some docs and fixed buffer overflows /peda]
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
As found by gcc -Wmaybe-uninitialized, having a storage_bytes value other
than 2 or 4 will result in undefined behavior:
drivers/iio/temperature/maxim_thermocouple.c: In function 'maxim_thermocouple_read':
drivers/iio/temperature/maxim_thermocouple.c:141:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This probably cannot happen, but returning -EINVAL here is appropriate
and makes gcc happy and the code more robust.
Fixes: 231147ee77 ("iio: maxim_thermocouple: Align 16 bit big endian value of raw reads")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
(cherry picked from commit 32cb7d27e6)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When updating the in_illuminance_calibscale and
in_illuminance_integration_time sysfs attributes, these values were not
actually written to the chip. The chip would continue to use the old
parameters. Extracted out tsl2583_set_als_gain() and
tsl2583_set_als_time() functions that are now called when these sysfs
attributes are updated. The chip initialization also calls these these
new functions.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
taos_chip_on() reads an eight member array called taos_config
that contains the desired state of the chip's registers. Only four
of the registers actually need to be written to. The four that do
not need to be written to are for the {low,high} byte of the lower
interrupt threshold and the {low,high} byte of the upper interrupt
threshold. Interrupts are currently not supported by this driver
so there is no need to write to these registers.
This patch removes the taos_config array and separates out the
i2c calls that write to the CONTROL, TIMING, INTERRUPT and ANALOG
registers. This is part of a larger refactor that was split up to
make the code review easier.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
We have #defines for all the individual sensor registers and
value/mask pairs #defined at the top of the file and used at
exactly one spot.
This is usually good if the #defines give a meaning to the
opaque magic numbers.
However in this case, the semantic meaning is inherent in the
name of the C99-addressable fields, and that means duplication
of information, and only makes the code hard to maintain since
you every time have to add a new #define AND update the site
where it is to be used.
Get rid of the #defines and just open code the values into the
appropriate struct elements. Make sure to explicitly address
the .hz and .value fields in the st_sensor_odr_avl struct
so that the meaning of all values is clear.
This patch is purely syntactic should have no semantic effect.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
We have #defines for all the individual sensor registers and
value/mask pairs #defined at the top of the file and used at
exactly one spot.
This is usually good if the #defines give a meaning to the
opaque magic numbers.
However in this case, the semantic meaning is inherent in the
name of the C99-addressable fields, and that means duplication
of information, and only makes the code hard to maintain since
you every time have to add a new #define AND update the site
where it is to be used.
Get rid of the #defines and just open code the values into the
appropriate struct elements. Make sure to explicitly address
the .hz and .value fields in the st_sensor_odr_avl struct
so that the meaning of all values is clear.
This patch is purely syntactic should have no semantic effect.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
We have #defines for all the individual sensor registers and
value/mask pairs #defined at the top of the file and used at
exactly one spot.
This is usually good if the #defines give a meaning to the
opaque magic numbers.
However in this case, the semantic meaning is inherent in the
name of the C99-addressable fields, and that means duplication
of information, and only makes the code hard to maintain since
you every time have to add a new #define AND update the site
where it is to be used.
Get rid of the #defines and just open code the values into the
appropriate struct elements. Make sure to explicitly address
the .hz and .value fields in the st_sensor_odr_avl struct
so that the meaning of all values is clear.
This patch is purely syntactic should have no semantic effect.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
aoeblk contains some mysterious code, that wants to elevate the bio
vec page counts while it's under IO. That is not needed, it's
fragile, and it's causing kernel oopses for some.
Reported-by: Tested-by: Don Koch <kochd@us.ibm.com>
Tested-by: Tested-by: Don Koch <kochd@us.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The i2c mux core can then take appropriate action depending on if it is
used for an actual i2c mux, or for an arbitrator or gate. In this case
it is used as a gate.
This will make devicetree bindings simpler when they are eventually
added.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
status is a u8 hence the check if status is less than zero has no effect.
Fix this by replacing status with int ret so the less than zero compare
will correctly detect errors.
Issue found with static analysis with CoverityScan, CID 1375919
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Fixes: 974e6f02e2 ("iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub")
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
We should be testing "ret" here.
Fixes: aa16c6bd0e ("iio:adc: Add support for AD7766/AD7767")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The ns->lba_shift assumes its value to be the logarithmic of the
LA size. A previous patch duplicated the lba_shift calculation into
lightnvm. It prematurely also subtracted a 512byte shift, which commonly
is applied per-command. The 512byte shift being subtracted twice led to
data loss when restoring the logical to physical mapping table from
device and when issuing I/O commands using rrpc.
Fix offset by removing the 512byte shift subtraction when calculating
lba_shift.
Fixes: b0b4e09c1a "lightnvm: control life of nvm_dev in driver"
Reported-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Fix a recent regression in the 8250_dw serial driver introduced by
adding a quirk for the APM X-Gene SoC to it which uncovered an issue
related to the handling of built-in device properties in the core
ACPI device enumeration code (Heikki Krogerus).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=XF0E
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a recent regression in the 8250_dw serial driver introduced by
adding a quirk for the APM X-Gene SoC to it which uncovered an issue
related to the handling of built-in device properties in the core ACPI
device enumeration code (Heikki Krogerus)"
* tag 'acpi-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / platform: Add support for build-in properties
- Prevent the PM core from attempting to suspend parent devices
if any of their children, whose suspend callbacks were invoked
asynchronously, have failed to suspend during the "late" and
"noirq" phases of system-wide suspend of devices (Brian Norris).
- Prevent the boot-time system suspend test code from leaking a
reference to the RTC device used by it (Johan Hovold).
- Fix cpupower to use the return value of one of its library
functions correctly and restore the correct behavior of it
when used for setting cpufreq tunables broken during the 4.7
development cycle (Laura Abbott).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ykEg
-----END PGP SIGNATURE-----
Merge tag 'pm-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two bugs in error code paths in the PM core (system-wide
suspend of devices), a device reference leak in the boot-time suspend
test code and a cpupower utility regression from the 4.7 cycle.
Specifics:
- Prevent the PM core from attempting to suspend parent devices if
any of their children, whose suspend callbacks were invoked
asynchronously, have failed to suspend during the "late" and
"noirq" phases of system-wide suspend of devices (Brian Norris).
- Prevent the boot-time system suspend test code from leaking a
reference to the RTC device used by it (Johan Hovold).
- Fix cpupower to use the return value of one of its library
functions correctly and restore the correct behavior of it when
used for setting cpufreq tunables broken during the 4.7 development
cycle (Laura Abbott)"
* tag 'pm-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails
PM / sleep: fix device reference leak in test_suspend
cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-set
- mmap handler for dma ops as generic handler no longer works for us [Alexey]
- Fixes for EZChip platform [Noam]
- Fix RTC clocksource driver build issue
- ARC IRQ handling fixes [Yuriy]
- Revert a recent makefile change which doesn't go well with oldish tools out in the wild
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hbBv
-----END PGP SIGNATURE-----
Merge tag 'arc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- mmap handler for dma ops as generic handler no longer works for us
[Alexey]
- Fixes for EZChip platform [Noam]
- Fix RTC clocksource driver build issue
- ARC IRQ handling fixes [Yuriy]
- Revert a recent makefile change which doesn't go well with oldish
tools out in the wild
* tag 'arc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARCv2: MCIP: Use IDU_M_DISTRI_DEST mode if there is only 1 destination core
ARC: IRQ: Do not use hwirq as virq and vice versa
ARC: [plat-eznps] set default baud for early console
ARC: [plat-eznps] remove IPI clear from SMP operations
Revert "ARC: build: retire old toggles"
ARC: timer: rtc: implement read loop in "C" vs. inline asm
ARC: change return value of userspace cmpxchg assist syscall
arc: Implement arch-specific dma_map_ops.mmap
ARC: [SMP] avoid overriding present cpumask
ARC: Enable PERF_EVENTS in nSIM driven platforms
Minor doc fix, a DMI match for ideapad and a fix to toshiba-wmi to avoid loading
on non-toshiba systems.
Documentation/ABI:
- ibm_rtl: The "What:" fields are incomplete
toshiba-wmi:
- Fix loading the driver on non Toshiba laptops
ideapad-laptop:
- Add another DMI entry for Yoga 900
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYJSzXAAoJEKbMaAwKp364Df0IAKOMnIMZ35K4uKCemZ7dVEtW
VvMgch2RZwEa+Oy8Og0o6WGYyurOR66w4oJqGlc9BYPaQo/akiKU0xLcQ2fqndsc
PnkberSaqER5/9COnSXLCWH9WsCW3rvdGHLg7ZicUiO+b6n/90hM4MRWL6j3QZCl
FYgMMEKSpPz7juZAdPIvfE4Mr157aESwmcHkihi7F4Ui6k2jln49R+zQoM6h9D/u
nH/pamxkfO/cJGQ3wcLVPhu6EL9wLqWU/+1/7FILYpoWkbiaJH3TtElQ3OU2yXq+
PmMcS8nI7Uv2Jrx66MfMx0fkCdA0lx5SlXsEmlwGtwk8A4qJq2AwTRvz5slHHTA=
=Upe0
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.9-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Minor doc fix, a DMI match for ideapad and a fix to toshiba-wmi to
avoid loading on non-toshiba systems.
Documentation/ABI:
- ibm_rtl: The "What:" fields are incomplete
toshiba-wmi:
- Fix loading the driver on non Toshiba laptops
ideapad-laptop:
- Add another DMI entry for Yoga 900"
* tag 'platform-drivers-x86-v4.9-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
Documentation/ABI: ibm_rtl: The "What:" fields are incomplete
toshiba-wmi: Fix loading the driver on non Toshiba laptops
ideapad-laptop: Add another DMI entry for Yoga 900
Pull block fixes from Jens Axboe:
"Two small (really, one liners both of them!) fixes that should go into
this series:
- Request allocation error handling fix for nbd, from Christophe,
fixing a regression in this series.
- An oops fix for drbd. Not a regression in this series, but stable
material. From Richard"
* 'for-linus' of git://git.kernel.dk/linux-block:
drbd: Fix kernel_sendmsg() usage - potential NULL deref
nbd: Fix error handling
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5c2j
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.9-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Update MAINTAINERS for Intel VMD driver filename
- Update Rockchip rk3399 host bridge driver DTS and resets
- Fix ROM shadow problem that made some video device initialization
fail
* tag 'pci-v4.9-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: VMD: Update filename to reflect move
arm64: dts: rockchip: add three new resets for rk3399 PCIe controller
PCI: rockchip: Add three new resets as required properties
PCI: Don't attempt to claim shadow copies of ROM
-----BEGIN PGP SIGNATURE-----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=Zg1p
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.9-rc5' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"AMD, radeon, i915, imx, msm and udl fixes:
- amdgpu/radeon have a number of power management regressions and
fixes along with some better error checking
- imx has a single regression fix
- udl has a single kmalloc instead of stack for usb control msg fix
- msm has some fixes for modesetting bugs and regressions
- i915 has a one fix for a Sandybridge regression along with some
others for DP audio.
They all seem pretty okay at this stage, we've got one MST fix I know
going through process for i915, but I expect it'll be next week"
* tag 'drm-fixes-for-v4.9-rc5' of git://people.freedesktop.org/~airlied/linux: (30 commits)
drm/udl: make control msg static const. (v2)
drm/amd/powerplay: implement get_clock_by_type for iceland.
drm/amd/powerplay/smu7: fix checks in smu7_get_evv_voltages (v2)
drm/amd/powerplay: update phm_get_voltage_evv_on_sclk for iceland
drm/amd/powerplay: propagate errors in phm_get_voltage_evv_on_sclk
drm/imx: disable planes before DC
drm/amd/powerplay: return false instead of -EINVAL
drm/amdgpu/powerplay/smu7: fix unintialized data usage
drm/amdgpu: fix crash in acp_hw_fini
drm/i915: Limit Valleyview and earlier to only using mappable scanout
drm/i915: Round tile chunks up for constructing partial VMAs
drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms
drm/i915/dp: BDW cdclk fix for DP audio
drm/i915/vlv: Prevent enabling hpd polling in late suspend
drm/i915: Respect alternate_ddc_pin for all DDI ports
drm/msm: Fix error handling crashes seen when VRAM allocation fails
drm/msm/mdp5: 8x16 actually has 8 mixer stages
drm/msm/mdp5: no scaling support on RGBn pipes for 8x16
drm/msm/mdp5: handle non-fullscreen base plane case
drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks
...
- Fix mmc card initialization for hosts not supporting HW busy detection
- Fix mmc_test for sending commands during non-blocking write
MMC host:
- mxs: Avoid using an uninitialized
- sdhci: Restore enhanced strobe setting during runtime resume
- sdhci: Fix a couple of reset related issues
- dw_mmc: Fix a reset controller issue
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mnjf
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix mmc card initialization for hosts not supporting HW busy
detection
- Fix mmc_test for sending commands during non-blocking write
MMC host:
- mxs: Avoid using an uninitialized
- sdhci: Restore enhanced strobe setting during runtime resume
- sdhci: Fix a couple of reset related issues
- dw_mmc: Fix a reset controller issue"
* tag 'mmc-v4.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mxs: Initialize the spinlock prior to using it
mmc: mmc: Use 500ms as the default generic CMD6 timeout
mmc: mmc_test: Fix "Commands during non-blocking write" tests
mmc: sdhci: Fix missing enhanced strobe setting during runtime resume
mmc: sdhci: Reset cmd and data circuits after tuning failure
mmc: sdhci: Fix unexpected data interrupt handling
mmc: sdhci: Fix CMD line reset interfering with ongoing data transfer
mmc: dw_mmc: add the "reset" as name of reset controller
Documentation: synopsys-dw-mshc: add binding for reset-names
