On CPU hotunplug the enqueued timers of the unplugged CPU are migrated to a
live CPU. This happens from the control thread which initiated the unplug.
If the CPU on which the control thread runs came out from a longer idle
period then the base clock of that CPU might be stale because the control
thread runs prior to any event which forwards the clock.
In such a case the timers from the unplugged CPU are queued on the live CPU
based on the stale clock which can cause large delays due to increased
granularity of the outer timer wheels which are far away from base:;clock.
But there is a worse problem than that. The following sequence of events
illustrates it:
- CPU0 timer1 is queued expires = 59969 and base->clk = 59131.
The timer is queued at wheel level 2, with resulting expiry time = 60032
(due to level granularity).
- CPU1 enters idle @60007, with next timer expiry @60020.
- CPU0 is hotplugged at @60009
- CPU1 exits idle and runs the control thread which migrates the
timers from CPU0
timer1 is now queued in level 0 for immediate handling in the next
softirq because the requested expiry time 59969 is before CPU1 base->clk
60007
- CPU1 runs code which forwards the base clock which succeeds because the
next expiring timer. which was collected at idle entry time is still set
to 60020.
So it forwards beyond 60007 and therefore misses to expire the migrated
timer1. That timer gets expired when the wheel wraps around again, which
takes between 63 and 630ms depending on the HZ setting.
Address both problems by invoking forward_timer_base() for the control CPUs
timer base. All other places, which might run into a similar problem
(mod_timer()/add_timer_on()) already invoke forward_timer_base() to avoid
that.
[ tglx: Massaged comment and changelog ]
Fixes: a683f390b9 ("timers: Forward the wheel clock whenever possible")
Co-developed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180118115022.6368-1-clingutla@codeaurora.org
pull the following:
- Markus provides two minor fixes to the Broadcom STB DPFE driver, one
to properly mask bits, and a second one to use the correct type. The
third commit is a consequence of a newer DFPE firmware which would
unfortunately crash without appropriate kernel changes.
-----BEGIN PGP SIGNATURE-----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=HV7L
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.16/drivers-fixes' of https://github.com/Broadcom/stblinux into fixes
Pull "Broadcom drivers fixes for 4.16" from Florian Fainelli:
This pull request contains Broadcom SoCs drivers fixes for 4.16, please
pull the following:
- Markus provides two minor fixes to the Broadcom STB DPFE driver, one
to properly mask bits, and a second one to use the correct type. The
third commit is a consequence of a newer DFPE firmware which would
unfortunately crash without appropriate kernel changes.
* tag 'arm-soc/for-4.16/drivers-fixes' of https://github.com/Broadcom/stblinux:
memory: brcmstb: dpfe: support new way of passing data from the DCPU
memory: brcmstb: dpfe: fix type declaration of variable "ret"
memory: brcmstb: dpfe: properly mask vendor error bits
4.16, please pull the following:
- Mathieu fixes leading 0x and 0's from bindings and Device Tree source
files, he has done this treewide and most of his changes are already in
4.16
- Stefan provides two changes to the BCM283x DTS files in order to fix
DTC warnings
- Florian fixes the amount of RAM on the BCM958625HR reference board to
properly limit to what is initialized by the bootloader
-----BEGIN PGP SIGNATURE-----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=9RVY
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.16/devicetree-fixes' of https://github.com/Broadcom/stblinux into fixes
Pull "Broadcom devicetree fixes for 4.16" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
4.16, please pull the following:
- Mathieu fixes leading 0x and 0's from bindings and Device Tree source
files, he has done this treewide and most of his changes are already in
4.16
- Stefan provides two changes to the BCM283x DTS files in order to fix
DTC warnings
- Florian fixes the amount of RAM on the BCM958625HR reference board to
properly limit to what is initialized by the bootloader
* tag 'arm-soc/for-4.16/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Move arm-pmu out of soc node
ARM: dts: bcm283x: Fix unit address of local_intc
ARM: dts: NSP: Fix amount of RAM on BCM958625HR
ARM: BCM: dts: Remove leading 0x and 0s from bindings notation
Changes old git repository to the maintained one and adds more patterns.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix i.MX GPC driver to remove power domains only when they are
initialized in imx_gpc_probe().
- Fix the broken Engicam i.CoreM6 DualLite/Solo RQS board DT to include
imx6dl.dtsi instead of imx6q.dtsi.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJalfO8AAoJEFBXWFqHsHzOPk4IALx0Gl07tgaTy2VgZJT2w0ud
ZoyeicSNxfM42auRHjC6QhYpQztw8+k4PCuGmUOutHc2Hbw21EXDxLiSwYgGarBR
3OuYShxBg6IExpUk7TM0kDFU0Z4GcpTjAovloM7yjLxCj88dzS+NIiUwPSl02kTp
iAGxVtTQOYLotJFZLQ+DGH3SuaEvOEzeQZz/v4v2/z1IsJRI5IQ2ILtSFEOYhMwh
vgagvvHopS2jIfLXd47PJJvUQuRjXH00FMvrEmBT2b31HJDU2uKn+y4BtMCJHzJV
cTaCwKcrJcLCH2tv5LVUg86VcbL7qbMGjqKQk4aSuEtMtJkpkD4palNG+y69N9g=
=NKMF
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Pull "i.MX fixes for 4.16" from Shawn Guo:
- Fix i.MX GPC driver to remove power domains only when they are
initialized in imx_gpc_probe().
- Fix the broken Engicam i.CoreM6 DualLite/Solo RQS board DT to include
imx6dl.dtsi instead of imx6q.dtsi.
* tag 'imx-fixes-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS
soc: imx: gpc: de-register power domains only if initialized
Pull kselftest fixes from Shuah Khan:
"Fixes for various problems in test output, compile errors, and missing
configs"
* tag 'linux-kselftest-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vm: update .gitignore with new test
selftests: memory-hotplug: silence test command echo
selftests/futex: Fix line continuation in Makefile
selftests: memfd: add config fragment for fuse
selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=m
selftests/android: Fix line continuation in Makefile
selftest/vDSO: fix O=
selftests: sync: missing CFLAGS while compiling
DDR4 has a 64-bit width not 128-bits. It was reporting
twice the width. Tested with my Ryzen 2400G.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix:
should do right shift on wb before clearing
cleanups:
1,should memset all wb buffer
2,set max wb number to 128 (total 4KB) is big enough
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the original method will change the wptr value in wb.
v2:
furthur cleanup
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
power containment disabled only on Fiji and compute
power profile. It violates PCIe spec and may cause power
supply failed. Enabling it will fix the issue, even the
fix will drop performance of some compute tests.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Emit frame size should match with corresponding function,
uvd_v6_0_enc_ring_emit_vm_flush has 5 amdgpu_ring_write
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
WB_FREE should be put after all engines's hw_fini
done, otherwise the invalid wptr/rptr_addr would still
be used by engines which trigger abnormal bugs.
This fixes couple DMAR reading error in host side for SRIOV
after guest kmd is unloaded.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
since hotplug_work is initialized under the case of
no dc support
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently all cursor related functions are made to all
pipes that are attached to a particular stream.
This is not applicable to pipes that do not have cursor plane
initialised like underlay.
Hence this patch allows cursor related operations on a pipe
only if ipp in available on that particular pipe.
The check is added to set_cursor_position & set_cursor_attribute.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
- Fix some compiler warnings
- Fix block rservations for transactions created during log recovery
- Fix resource leaks when respecifying mount options
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=A2Bo
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- fix some compiler warnings
- fix block reservations for transactions created during log recovery
- fix resource leaks when respecifying mount options
* tag 'xfs-4.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix potential memory leak in mount option parsing
xfs: reserve blocks for refcount / rmap log item recovery
xfs: use memset to initialize xfs_scrub_agfl_info
Today the tty0 and hvc0 consoles are added as a preferred consoles for
pv domUs only. As this requires a boot parameter for getting dom0
messages per default, add them for dom0, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
A toolstack may delete the vif frontend and backend xenstore entries
while xen-netfront is in the removal code path. In that case, the
checks for xenbus_read_driver_state would return XenbusStateUnknown, and
xennet_remove would hang indefinitely. This hang prevents system
shutdown.
xennet_remove must be able to handle XenbusStateUnknown, and
netback_changed must also wake up the wake_queue for that state as well.
Fixes: 5b5971df3b ("xen-netfront: remove warning when unloading module")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Cc: Eduardo Otubo <otubo@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Current cleanup in the error path of xen_bind_pirq_msi_to_irq is
wrong. First of all there's an off-by-one in the cleanup loop, which
can lead to unbinding wrong IRQs.
Secondly IRQs not bound won't be freed, thus leaking IRQ numbers.
Note that there's no need to differentiate between bound and unbound
IRQs when freeing them, __unbind_from_irq will deal with both of them
correctly.
Fixes: 4892c9b4ad ("xen: add support for MSI message groups")
Reported-by: Hooman Mirhadi <mirhadih@amazon.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Amit Shah <aams@amazon.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Pull NVMe fixes from Keith for 4.16-rc.
* 'for-jens' of git://git.infradead.org/nvme:
nvmet: fix PSDT field check in command format
nvme-multipath: fix sysfs dangerously created links
nvme-pci: Fix nvme queue cleanup if IRQ setup fails
nvmet-loop: use blk_rq_payload_bytes for sgl selection
nvme-rdma: use blk_rq_payload_bytes instead of blk_rq_bytes
nvme-fabrics: don't check for non-NULL module in nvmf_register_transport
-----BEGIN PGP SIGNATURE-----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=PWy1
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.16-3' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
"A single fix for a memory leak regression in the dma-debug code"
* tag 'dma-mapping-4.16-3' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: fix memory leak in debug_dma_alloc_coherent
Commit fe49789fab ("drm/i915: Deconstruct execute fence") re-arranged
the code and moved the i915_gem_request_execute tracepoint to before the
global seqno is assigned to the request.
We need to move the tracepoint a bit later so this information is once
again available.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: fe49789fab ("drm/i915: Deconstruct execute fence")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220104742.565-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 158863fb50)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we fail to unbind the vma (due to a signal on an active buffer that
needs to be moved for the next execbuf), then we need to clear the
persistent tracking state we setup for this execbuf.
Fixes: c7c6e46f91 ("drm/i915: Convert execbuf to use struct-of-array packing for critical fields")
Testcase: igt/gem_fenced_exec_thrash/no-spare-fences-busy*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.14+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219140144.24004-1-chris@chris-wilson.co.uk
(cherry picked from commit ed2f353232)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Register Address for CNL_PORT_DW5_LN0_D is 0x162E54, but current code is
defining it as 0x162ED4. Similarly for CNL_PORT_DW7_LN0_D register address
is defined 0x162EDC instead of 0x162E5C, fix it.
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Fixes: 04416108cc ("drm/i915/cnl: Add registers related to voltage swing sequences.")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180215095643.3844-2-mahesh1.kumar@intel.com
(cherry picked from commit e103962611)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Turns out -1 >= ARRAY_SIZE() is always true. Move the bounds check where
we know pipe >= 0 and next to the array indexing where it makes most
sense.
Fixes: 9965db26ac ("drm/i915: Check for fused or unused pipes")
Fixes: 0b7029b7e4 ("drm/i915: Check for fused or unused pipes")
Cc: <stable@vger.kernel.org> # v4.10+
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214173840.25360-1-jani.nikula@intel.com
(cherry picked from commit cdb3db8542)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
GENMASK_ULL wants the high bit of the mask first. The current value
cancels the in-fence when an out-fence is returned.
Fixes: fec0445caa ("drm/i915: Support explicit fencing for execbuf")
Testcase: igt/gem_exec_fence/keep-in-fence*
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214191827.8465-1-daniele.ceraolospurio@intel.com
Cc: <stable@vger.kernel.org> # v4.12+
(cherry picked from commit b6a88e4a80)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Document support for the Interrupt Controller for Externel Devices
(INTC-EX) in the Renesas M3-N (r8a77965) SoC.
No driver update is needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-renesas-soc@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Link: https://lkml.kernel.org/r/1519658712-22910-1-git-send-email-geert%2Brenesas@glider.be
As we have option in u-boot to set CPU mask for running linux,
we want to pass information to kernel about CPU cores should
be brought up. So we patch kernel dtb in u-boot to set
possible-cpus property.
This also allows us to have correctly setuped MCIP debug mask.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
As of today we use hardcoded MCIP debug mask, so if we launch
kernel via debugger and kick fever cores than HW has all cpus
hang at the momemt of setup MCIP debug mask.
So update MCIP debug mask when the new cpu came online, instead of
use hardcoded MCIP debug mask.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
In SMP systems, GFRC is used for clocksource. However by default the
counter keeps running even when core is halted (say when debugging via a
JTAG debugger). This confuses Linux timekeeping and triggers flase RCU stall
splat such as below:
| [ARCLinux]# while true; do ./shm_open_23-1.run-test ; done
| Running with 1000 processes for 1000 objects
| hrtimer: interrupt took 485060 ns
|
| create_cnt: 1000
| Running with 1000 processes for 1000 objects
| [ARCLinux]# INFO: rcu_preempt self-detected stall on CPU
| 2-...: (1 GPs behind) idle=a01/1/0 softirq=135770/135773 fqs=0
| INFO: rcu_preempt detected stalls on CPUs/tasks:
| 0-...: (1 GPs behind) idle=71e/0/0 softirq=135264/135264 fqs=0
| 2-...: (1 GPs behind) idle=a01/1/0 softirq=135770/135773 fqs=0
| 3-...: (1 GPs behind) idle=4e0/0/0 softirq=134304/134304 fqs=0
| (detected by 1, t=13648 jiffies, g=31493, c=31492, q=1)
Starting from ARC HS v3.0 it's possible to tie GFRC to state of up-to 4
ARC cores with help of GFRC's CORE register where we set a mask for
cores which state we need to rely on.
We update cpu mask every time new cpu came online instead of using
hardcoded one or using mask generated from "possible_cpus" as we
want it set correctly even if we run kernel on HW which has fewer cores
than expected (or we launch kernel via debugger and kick fever cores
than HW has)
Note that GFRC halts when all cores have halted and thus relies on
programming of Inter-Core-dEbug register to halt all cores when one
halts.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: rewrote changelog]
- Update i.MX thermal binding example to use current binding, not the
deprecated one
- Move arm-charlcd to auxdisplay/
- Fix misspelling of "debounce-interval"
-----BEGIN PGP SIGNATURE-----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=ia73
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
- update i.MX thermal binding example to use current binding, not the
deprecated one
- move arm-charlcd to auxdisplay/
- fix misspelling of "debounce-interval"
* tag 'devicetree-fixes-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: power: Fix "debounce-interval" property misspelling
auxdisplay: Move arm-charlcd binding to correct folder
dt-bindings: thermal: imx: update the binding to new method
When the Intel Edison module is powered with 3.3V, the reboot command makes
the module stuck. If the module is powered at a greater voltage, like 4.4V
(as the Edison Mini Breakout board does), reboot works OK.
The official Intel Edison BSP sends the IPCMSG_COLD_RESET message to the
SCU by default. The IPCMSG_COLD_BOOT which is used by the upstream kernel
is only sent when explicitely selected on the kernel command line.
Use IPCMSG_COLD_RESET unconditionally which makes reboot work independent
of the power supply voltage.
[ tglx: Massaged changelog ]
Fixes: bda7b072de ("x86/platform/intel-mid: Implement power off sequence")
Signed-off-by: Sebastian Panceac <sebastian@resin.io>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1519810849-15131-1-git-send-email-sebastian@resin.io
PSDT field section according to NVM_Express-1.3:
"This field specifies whether PRPs or SGLs are used for any data
transfer associated with the command. PRPs shall be used for all
Admin commands for NVMe over PCIe. SGLs shall be used for all Admin
and I/O commands for NVMe over Fabrics. This field shall be set to
01b for NVMe over Fabrics 1.0 implementations.
Suggested-by: Idan Burstein <idanb@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Continue the switch table detection whack-a-mole. Add a check to
distinguish KASAN data reads from switch data reads. The switch jump
tables in .rodata have relocations associated with them.
This fixes the following warning:
crypto/asymmetric_keys/x509_cert_parser.o: warning: objtool: x509_note_pkey_algo()+0xa4: sibling call from callable instruction with modified stack frame
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/d7c8853022ad47d158cb81e953a40469fc08a95e.1519784382.git.jpoimboe@redhat.com
Omitting suffixes from instructions in AT&T mode is bad practice when
operand size cannot be determined by the assembler from register
operands, and is likely going to be warned about by upstream gas in the
future (mine does already). Add the missing suffixes here. Note that for
64-bit this means some operations change from being 32-bit to 64-bit.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/5A93F98702000078001ABACC@prv-mh.provo.novell.com
Omitting suffixes from instructions in AT&T mode is bad practice when
operand size cannot be determined by the assembler from register
operands, and is likely going to be warned about by upstream gas in the
future (mine does already). Add the single missing suffix here.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/5A93F96902000078001ABAC8@prv-mh.provo.novell.com
As done in commit 3b3a371cc9 ("x86/debug: Use UD2 for WARN()"), this
switches to UD2 from UD0 to keep disassembly readable.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20180225165056.GA11719@beast
TIMER0 interrupt ACK is different for ARC700 and HS3x cores.
This came to light in some internal discussions and it is nice to have this
documented rather than digging up the PRM (Programmers Reference Manual).
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Link: https://lkml.kernel.org/r/1519241491-12570-1-git-send-email-vgupta@synopsys.com
__gic_clocksource_init() extracts the GIC_CONFIG_COUNTBITS field from
read_gic_config() by right shifting the register value. The shift count is
determined by the most significant bit (__fls) of the bitmask which is
wrong as it shifts out the complete bitfield.
Use the least significant bit (__ffs) instead to shift the bitfield down to
bit 0.
Fixes: e07127a077 ("clocksource: mips-gic-timer: Use new GIC accessor functions")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: daniel.lezcano@linaro.org
Cc: paul.burton@imgtec.com
Link: https://lkml.kernel.org/r/20180228095610.50341-1-nbd@nbd.name
The tm-resched-dscr test links against pmu/lib.o, but we don't have a
rule to clean pmu/lib.o. This can lead to a build break if you build
for big endian and then little, or vice versa.
Fix it by making tm-resched-dscr depend on pmu/lib.c, causing the code
to be built directly in, meaning no .o is generated.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Once in a while I see build errors similar to the following
when building images from a clean tree.
Building powerpc:virtex-ml507:44x/virtex5_defconfig ... failed
------------
Error log:
arch/powerpc/boot/treeboot-akebono.c:37:20: fatal error:
libfdt.h: No such file or directory
Building powerpc🎍smpdev:44x/bamboo_defconfig ... failed
------------
Error log:
arch/powerpc/boot/treeboot-akebono.c:37:20: fatal error:
libfdt.h: No such file or directory
arch/powerpc/boot/treeboot-currituck.c:35:20: fatal error:
libfdt.h: No such file or directory
Rebuilds will succeed.
Turns out that several source files in arch/powerpc/boot/ include
libfdt.h, but Makefile dependencies are incomplete. Let's fix that.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If multipathing is enabled, each NVMe subsystem creates a head
namespace (e.g., nvme0n1) and multiple private namespaces
(e.g., nvme0c0n1 and nvme0c1n1) in sysfs. When creating links for
private namespaces, links of head namespace are used, so the
namespace creation order must be followed (e.g., nvme0n1 ->
nvme0c1n1). If the order is not followed, links of sysfs will be
incomplete or kernel panic will occur.
The kernel panic was:
kernel BUG at fs/sysfs/symlink.c:27!
Call Trace:
nvme_mpath_add_disk_links+0x5d/0x80 [nvme_core]
nvme_validate_ns+0x5c2/0x850 [nvme_core]
nvme_scan_work+0x1af/0x2d0 [nvme_core]
Correct order
Context A Context B
nvme0n1
nvme0c0n1 nvme0c1n1
Incorrect order
Context A Context B
nvme0c1n1
nvme0n1
nvme0c0n1
The nvme_mpath_add_disk (for creating head namespace) is called
just before the nvme_mpath_add_disk_links (for creating private
namespaces). In nvme_mpath_add_disk, the first context acquires
the lock of subsystem and creates a head namespace, and other
contexts do nothing by checking GENHD_FL_UP of a head namespace
after waiting to acquire the lock. We verified the code with or
without multipathing using three vendors of dual-port NVMe SSDs.
Signed-off-by: Baegjae Sung <baegjae@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Makes them easier to find.
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
When LPE audio driver gets some error at probing, it may lead to a
crash because of canceling the pending work in hdmi_lpe_audio_free(),
since some of ports might be still not initialized.
For assuring the proper free of each port, initialize all ports at the
beginning of the probe.
Fixes: b4eb0d522f ("ALSA: x86: Split snd_intelhad into card and PCM specific structures")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit change for supporting the multiple ports moved involved
some code shuffling, and there the initializations of spinlock and
mutex in snd_intelhad object were dropped mistakenly.
This patch adds the missing initializations again for each port.
Fixes: b4eb0d522f ("ALSA: x86: Split snd_intelhad into card and PCM specific structures")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The patch "ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE
operations" introduced a potential for kernel memory corruption due
to an incorrect if statement allowing non-readable controls to fall
through and call the get function. For TLV controls a driver can omit
SNDRV_CTL_ELEM_ACCESS_READ to ensure that only the TLV get function
can be called. Instead the normal get() can be invoked unexpectedly
and as the driver expects that this will only be called for controls
<= 512 bytes, potentially try to copy >512 bytes into the 512 byte
return array, so corrupting kernel memory.
The problem is an attempt to refactor the snd_ctl_elem_read function
to invert the logic so that it conditionally aborted if the control
is unreadable instead of conditionally executing. But the if statement
wasn't inverted correctly.
The correct inversion of
if (a && !b)
is
if (!a || b)
Fixes: becf9e5d55 ("ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE operations")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Powerplay fixes for cards with no displays attached
- Couple of DC fixes
- radeon workaround for PPC64
* 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: insist on 32-bit DMA for Cedar on PPC64/PPC64LE
drm/amd/display: VGA black screen from s3 when attached to hook
drm/amdgpu: Unify the dm resume calls into one
drm/amdgpu: Add a missing lock for drm_mm_takedown
Revert "drm/radeon/pm: autoswitch power state when in balanced mode"
drm/amd/powerplay/smu7: allow mclk switching with no displays
drm/amd/powerplay/vega10: allow mclk switching with no displays
