The 'void __iomem *regs' is not used in pl330_submit_req() function.
Remove it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The pl330_submit_req() checked supplied 'struct pl330_thread thrd' and
'struct dma_pl330_desc desc' parameters for non-NULL. However these
checks are useless because supplied arguments won't be NULL.
The pl330_submit_req() is called in only one place and:
1. 'desc' is already dereferenced in fill_queue() before calling
pl330_submit_req().
2. 'thrd' is always dereferenced after calling
fill_queue()->pl330_submit_req().
Removing the checks for non-NULL values fixes following warning:
drivers/dma/pl330.c:1376 pl330_submit_req() warn: variable dereferenced before check 'thrd' (see line 1367)
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The argument is always set to NULL and never used. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Commit 6079d38 ("dmaengine: pl330: Remove useless xfer_cb indirection")
removed the __callback() function which created an unnecessary level of
indirection to execute the tranfer callback .xfer_cb
Unfortunately the commit also changed the semantics slightly since that
function used to check if the request was not NULL before attempting to
execute the callback function. Not checking this could lead to a kernel
NULL pointer dereference error.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The pl330_chan_ctrl() function has 3 internal code paths which, except for the
locking, do not share any code outside of their sections. One code path is never
exercised and can be removed. The other two are mostly just forwards to the
_start() and _stop() calls. This patch modifies the code to instead of going via
pl330_chan_ctrl() to call _start() and _stop() directly. This allows to
completely remove pl330_chan_ctrl().
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Instead of storing a special instruction in the command buffer to mark a request
as currently unused just set the descriptor field to NULL.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The pl330_req struct is embedded into the dma_pl330_desc struct. But half of the
pl330_req struct are pointers to other fields of the dma_pl330_desc struct it is
embedded to. By directly embedding the fields from the pl330_req struct into the
dma_pl330_desc struct and reworking the code to work with the dma_pl330_desc
struct those pointers can be eliminated. This slightly simplifies the code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Both the dma_pl330_dmac and the pl330_dmac struct have the same lifetime and the
separation of them is a relict of this having been two different drivers in the
past. Merging them into one struct makes the code a bit simpler as it for
example allows to remove the pointers going back and forth between the two
structs.
While we are at it also directly embed the pl330_info struct into the
pl330_dmac struct as this allows to remove some more redundant fields.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Since we keep a pointer to the manager thread it is fairly easy to check if a
thread is the manager thread.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
We know that we do not create invalid ccr settings in this driver. There is no
need to validate them.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The pl330_chid field of the dma_pl330_chan struct always holds a pointer to the
thread that is associated with the channel. Changing its type form void * to
struct pl330_thread makes things more type safe and removes the need for
unnecessary typecasts. While we are at it also rename the field from the cryptic
pl330_chid to thread.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The xfer_cb callback of the pl330_req struct is always set to the same function.
This adds an unnecessary step of indirection. Instead just call the callback
function directly.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The mc_len is initialized but its value is never read again, so remove it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The next field is always NULL, so we can remove it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The dmac_reset() callaback of the pl330_info struct is always set to NULL, so
remove it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The pl330_chanstatus struct is completely unused, so remove it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The settings for destination and source cache control are exactly the same. This
patch removes the duplicated enum and uses the same for both destination and
source cache control.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The pl330 driver has the custom pl330_reqtype enum which has the same possible
settings as the generic dma_transfer_direction enum. Switching over to the
generic enum internally makes it possible to directly initialize it from the
transfer request direction.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Pull slave-dma updates from Vinod Koul:
- new driver for BCM2835 used in R-pi
- new driver for MOXA ART
- dma_get_any_slave_channel API for DT based systems
- minor fixes and updates spread acrooss driver
[ The fsl-ssi dual fifo mode support addition clashed badly with the
other changes to fsl-ssi that came in through the sound merge. I did
a very rough cut at fixing up the conflict, but Nicolin Chen (author
of both sides) will need to verify and check things ]
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits)
dmaengine: mmp_pdma: fix mismerge
dma: pl08x: Export pl08x_filter_id
acpi-dma: align documentation with kernel-doc format
dma: fix vchan_cookie_complete() debug print
DMA: dmatest: extend the "device" module parameter to 32 characters
drivers/dma: fix error return code
dma: omap: Set debug level to debugging messages
dmaengine: fix kernel-doc style typos for few comments
dma: tegra: add support for Tegra148/124
dma: dw: use %pad instead of casting dma_addr_t
dma: dw: join split up messages
dma: dw: fix style of multiline comment
dmaengine: k3dma: fix sparse warnings
dma: pl330: Use dma_get_slave_channel() in the of xlate callback
dma: pl330: Differentiate between submitted and issued descriptors
dmaengine: sirf: Add device_slave_caps interface
DMA: Freescale: change BWC from 256 bytes to 1024 bytes
dmaengine: Add MOXA ART DMA engine driver
dmaengine: Add DMA_PRIVATE to BCM2835 driver
dma: imx-sdma: Assign a default script number for ROM firmware cases
...
Currently the driver uses dma_request_channel() with a custom filter function to
find the requested channel. This will loop over all available channels until the
one we want has been found, but we already know which channel we want to
request, so we can dma_get_slave_channel(). This also makes the code a bit
shorter cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The pl330 dmaengine driver currently does not differentiate between submitted
and issued descriptors. It won't start transferring a newly submitted
descriptor until issue_pending() is called, but only if it is idle. If it is
active and a new descriptor is submitted before it goes idle it will happily
start the newly submitted descriptor once all earlier submitted descriptors have
been completed. This is not a 100% correct with regards to the dmaengine
interface semantics. A descriptor is not supposed to be started until the next
issue_pending() call after the descriptor has been submitted. This patch adds a
second per channel list that keeps track of the submitted descriptors. Once
issue_pending() is called the submitted descriptors are moved to the working
list and only descriptors on the working list are started.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The pl330 driver currently does not support residue reporting, so set the
residue granularity to DMA_RESIDUE_GRANULARITY_DESCRIPTOR.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
In order to be able to set a maximum segment size for the device we need to
allocate a dma_parameters struct for the device first.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Pull slave-dmaengine changes from Vinod Koul:
"This brings for slave dmaengine:
- Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as
dmaengine can only transfer and not verify validaty of dma
transfers
- Bunch of fixes across drivers:
- cppi41 driver fixes from Daniel
- 8 channel freescale dma engine support and updated bindings from
Hongbo
- msx-dma fixes and cleanup by Markus
- DMAengine updates from Dan:
- Bartlomiej and Dan finalized a rework of the dma address unmap
implementation.
- In the course of testing 1/ a collection of enhancements to
dmatest fell out. Notably basic performance statistics, and
fixed / enhanced test control through new module parameters
'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and
Linus [Walleij] for their review.
- Testing the raid related corner cases of 1/ triggered bugs in
the recently added 16-source operation support in the ioatdma
driver.
- Some minor fixes / cleanups to mv_xor and ioatdma"
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits)
dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers
dma: mv_xor: Remove unneeded NULL address check
ioat: fix ioat3_irq_reinit
ioat: kill msix_single_vector support
raid6test: add new corner case for ioatdma driver
ioatdma: clean up sed pool kmem_cache
ioatdma: fix selection of 16 vs 8 source path
ioatdma: fix sed pool selection
ioatdma: Fix bug in selftest after removal of DMA_MEMSET.
dmatest: verbose mode
dmatest: convert to dmaengine_unmap_data
dmatest: add a 'wait' parameter
dmatest: add basic performance metrics
dmatest: add support for skipping verification and random data setup
dmatest: use pseudo random numbers
dmatest: support xor-only, or pq-only channels in tests
dmatest: restore ability to start test at module load and init
dmatest: cleanup redundant "dmatest: " prefixes
dmatest: replace stored results mechanism, with uniform messages
Revert "dmatest: append verify result to results"
...
Pull dmaengine changes from Dan
1/ Bartlomiej and Dan finalized a rework of the dma address unmap
implementation.
2/ In the course of testing 1/ a collection of enhancements to dmatest
fell out. Notably basic performance statistics, and fixed / enhanced
test control through new module parameters 'run', 'wait', 'noverify',
and 'verbose'. Thanks to Andriy and Linus for their review.
3/ Testing the raid related corner cases of 1/ triggered bugs in the
recently added 16-source operation support in the ioatdma driver.
4/ Some minor fixes / cleanups to mv_xor and ioatdma.
Conflicts:
drivers/dma/dmatest.c
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Add a hook for a common dma unmap implementation to enable removal of
the per driver custom unmap code. (A reworked version of Bartlomiej
Zolnierkiewicz's patches to remove the custom callbacks and the size
increase of dma_async_tx_descriptor for drivers that don't care about
raid).
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
[bzolnier: prepare pl330 driver for adding missing unmap while at it]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
On 64 bit systems GCC warns that:
drivers/dma/pl330.c: In function ‘pl330_filter’:
drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
It's harmless and I have casted it away.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
There are only AMBA_NR_IRQS (2) elements in adev->irq[]. This code
maybe works if the there is a zero directly after the array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The DMA API requires drivers to call the appropriate dma_set_mask()
functions before doing any DMA mapping. Add this required call to
the AMBA PL330 driver.
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Driver core clears the driver data to NULL after device_release
or on probe failure, so just remove it from here.
Driver core change:
"device-core: Ensure drvdata = NULL when no driver is bound"
(sha1: 0998d06310)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Some pl330 have per channel irq and it is necessary
to allocate all of them. Loop over irq assigned for this
device to support these pl330 IPs.
For example this IP is available on Xilinx Zynq platform.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The pl330 DMA driver is broken in regard to handling a terminate all request
while it is processing the list of completed descriptors. This is most visible
when calling dmaengine_terminate_all() from within the descriptors callback for
cyclic transfers. In this case the TERMINATE_ALL transfer will clear the
work_list and stop the transfer. But after all callbacks for all completed
descriptors have been handled the descriptors will be re-enqueued into the (now
empty) work_list. So the next time dma_async_issue_pending() is called for the
channel these descriptors will be transferred again which will cause data
corruption. Similar issues can occur if dmaengine_terminate_all() is not called
from within the descriptor callback but runs on a different CPU at the same time
as the completed descriptor list is processed.
This patch introduces a new per channel list which will hold the completed
descriptors. While processing the list the channel's lock will be held to avoid
racing against dmaengine_terminate_all(). The lock will be released when calling
the descriptors callback though. Since the list of completed descriptors might
be modified (e.g. by calling dmaengine_terminate_all() from the callback) we can
not use the normal list iterator macros. Instead we'll need to check for each
loop iteration again if there are still items in the list. The drivers
TERMINATE_ALL implementation is updated to move descriptors from both the
work_list as well the new completed_list back to the descriptor pool. This makes
sure that none of the descripts finds its way back into the work list and also
that we do not call any futher complete callbacks after
dmaengine_terminate_all() has been called.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This patch adds __pl330_giveback_descs which give back descriptors when fails
allocating descriptors. It requires to eliminate duplication for
pl330_prep_dma_sg which will be added later.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Acked-by : Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Allocate a descriptor for each period of a cyclic transfer, not just the first.
Also since the callback needs to be called for each finished period make sure to
initialize the callback and callback_param fields of each descriptor in a cyclic
transfer.
Cc: stable@vger.kernel.org
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Implement the device_slave_caps() callback for the pl330 driver. This allows
dmaengine users like the generic ALSA dmaengine PCM driver to query the
capabilities of the driver. The PL330 supports all buswidths and both
mem-to-dev as well as dev-to-mem transfers. In theory there is no limit on the
number of segments that can be transferred (in practice you'll run out of memory
eventually) and the number of bytes per segment is limited by the size of the
PL330 program buffer. Due to the nature of the PL330 the maximum number of bytes
per segment depends on the burstsize, the driver sets it to the value for a
1-byte burstsize, since it is the smallest.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Pull slave-dmaengine updates from Vinod Koul:
"Once you have some time from extended weekend celebrations please
consider pulling the following to get:
- Various fixes and PCI driver for dw_dmac by Andy
- DT binding for imx-dma by Markus & imx-sdma by Shawn
- DT fixes for dmaengine by Lars
- jz4740 dmac driver by Lars
- and various fixes across the drivers"
What "extended weekend celebrations"? I'm in the merge window, who has
time for extended celebrations..
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (40 commits)
DMA: shdma: add DT support
DMA: shdma: shdma_chan_filter() has to be in shdma-base.h
DMA: shdma: (cosmetic) don't re-calculate a pointer
dmaengine: at_hdmac: prepare clk before calling enable
dmaengine/trivial: at_hdmac: add curly brackets to if/else expressions
dmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors()
dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT binding
ARM: at91: dt: add header to define at_hdmac configuration
MIPS: jz4740: Correct clock gate bit for DMA controller
MIPS: jz4740: Remove custom DMA API
MIPS: jz4740: Register jz4740 DMA device
dma: Add a jz4740 dmaengine driver
MIPS: jz4740: Acquire and enable DMA controller clock
dma: mmp_tdma: disable irq when disabling dma channel
dmaengine: PL08x: Avoid collisions with get_signal() macro
dmaengine: dw: select DW_DMAC_BIG_ENDIAN_IO automagically
dma: dw: add PCI part of the driver
dma: dw: split driver to library part and platform code
dma: move dw_dmac driver to an own directory
dw_dmac: don't check resource with devm_ioremap_resource
...
The microcode bus address (pl330_dmac.mcode_bus) is currently a u32,
which fails to compile when building on a system with 64-bit bus
addresses.
This patch uses dma_addr_t to represent the address instead.
Cc: Jassi Brar <jaswinder.singh@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The PL330 driver probes the peripheral and primecell IDs of the device to
make sure that it is indeed an AMBA PL330. However, it does this by
making byte accesses to a device mapping of the word-aligned ID
registers, which is either UNPREDICTABLE or generates an alignment fault
(depending on the presence of the virtualisation extensions).
Rather than fix this code, we can actually rip most of it out and let
the AMBA bus driver correctly do the probing for us.
Cc: Jassi Brar <jaswinder.singh@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>