Add Raven2 definitions in the dc code
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Raven2 has a HW issue that it is unable to use the vram which is out of
MC_VM_SYSTEM_APERTURE_HIGH_ADDR. So here is the workaround that increase system
aperture high address to get rid of the VM fault and hardware hang.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Golden register settings from the hw team.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Golden register settings from the hw team.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modified for using raven2_asd.bin to replace raven_asd.bin for raven2
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rev id is used for identifying Raven2 series of chips. So we would better to
initialize it at first.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than checking the asic type, check whether the UVD
or VCE IP blocks exist. This way we don't have to update
the check with new asics that use VCN.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable gfxoff in non-sriov and stutter mode by default
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add new pci device for raven series.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove some functions due to the design change.
All the mmhub power gating sequence is moved to
smu fw.Driver sends the message to enable mmhub
powergating.We can also skip the fw version check
since the old fw version is in a very early stage
and we don't use that fw for release.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as raven.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Treat it the same as raven for now.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as raven.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as raven for now.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add powerplay support for picasso, treat it the same as raven now.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for picasso to the display manager.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vm support for picasso.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the IP blocks, clock and powergating flags, and common clockgating support.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The prior assumption was that we did not need to reset the CSB on
wedging when cancelling the outstanding requests as it would be cleaned
up in the subsequent reset prior to restarting the GPU. However, what
was not accounted for was that in preparing for the reset, we would try
to process the outstanding CSB entries. If the GPU happened to complete
a CS event just as we were performing the cancellation of requests, that
event would be kept in the CSB until the reset -- but our bookkeeping
was cleared, causing confusion when trying to complete the CS event.
v2: Use a sanitize on unwedge to avoid interfering with eio suspend
(where we intentionally disable GPU reset).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107925
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914080017.30308-3-chris@chris-wilson.co.uk
If an asynchronous wait on a foriegn fence, we print a warning
indicating which fence was not signaled. As i915_sw_fences become more
common, include the debug hint (the symbol-name of the target) to help
identify the waiter. E.g.
[ 31.968144] Asynchronous wait on fence sw_sync:gem_eio:1 timed out (hint:submit_notify [i915])
We also want to downgrade from a warning to a notice (normal but
significant condition) as the timeout is imposed and controlled by the
caller (i.e. it is deliberate) and can be provoked by userspace.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914124007.18790-1-chris@chris-wilson.co.uk
That we use a WB mapping for updating the RING_TAIL register inside the
context image even on !llc machines has been a source of consternation
for every reader. It appears to work on bsw+, but it may just have been
that we have been incredibly bad at detecting the errors.
v2: With extra enthusiasm.
v3: Drop force of map type for pinned default_state as by the time we
pin it, the map type is always WB and doesn't conflict with the earlier
use by ce->state.
v4: Transfer engine->default_state from MAP_WC to MAP_WB on creation so
we do not need the MAP_FORCE littered around the backends
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914123504.2062-3-chris@chris-wilson.co.uk
Check we can indeed acquire a WB mapping of the context image on module
load. Later this will give us the opportunity to validate that we can
switch from WC to WB as required.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914123504.2062-2-chris@chris-wilson.co.uk
Now that we reload both RING_HEAD and RING_TAIL when rebinding the
context, we do not need to scrub those registers immediately on resume.
v2: Handle the perma-pinned contexts.
v3: Set RING_TAIL on context-pin so that we always have known state in
the context image for the ring registers and all parties have similar
code (ripe for refactoring).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914123504.2062-1-chris@chris-wilson.co.uk
In order to reduce latency when checking for idle we kick the tasklet
directly. Sometimes this is not enough as it is queued on another cpu
and so to improve the accuracy of this idle-check (and so to reduce
latency overall by avoiding another pass, or worse declaring a timeout!)
wait for the tasklet to complete.
References: https://bugs.freedesktop.org/show_bug.cgi?id=107916
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914080017.30308-2-chris@chris-wilson.co.uk
If we try and fail to allocate a i915_request, we apply some
backpressure on the clients to throttle the memory allocations coming
from i915.ko. Currently, we wait until completely idle, but this is far
too heavy and leads to some situations where the only escape is to
declare a client hung and reset the GPU. The intent is to only ratelimit
the allocation requests and to allow ourselves to recycle requests and
memory from any long queues built up by a client hog.
Although the system memory is inherently a global resources, we don't
want to overly penalize an unlucky client to pay the price of reaping a
hog. To reduce the influence of one client on another, we can instead of
waiting for the entire GPU to idle, impose a barrier on the local client.
(One end goal for request allocation is for scalability to many
concurrent allocators; simultaneous execbufs.)
To prevent ourselves from getting caught out by long running requests
(requests that may never finish without userspace intervention, whom we
are blocking) we need to impose a finite timeout, ideally shorter than
hangcheck. A long time ago Paul McKenney suggested that RCU users should
ratelimit themselves using judicious use of cond_synchronize_rcu(). This
gives us the opportunity to reduce our indefinite wait for the GPU to
idle to a wait for the RCU grace period of the previous allocation along
this timeline to expire, satisfying both the local and finite properties
we desire for our ratelimiting.
There are still a few global steps (reclaim not least amongst those!)
when we exhaust the immediate slab pool, at least now the wait is itself
decoupled from struct_mutex for our glorious highly parallel future!
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106680
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914080017.30308-1-chris@chris-wilson.co.uk
Upcoming implementations of the R-Car DU have removed support for
interlaced display pipelines. Provide a means to determine this based on
the feature flags of the hardware configuration structs.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
These flags are represented by bit fields. To make this clear, utilise
the BIT() macro.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Use the newly exposed VSP1 interface to enable interlaced frame support
through the VSP1 LIF pipelines.
The DSMR register is updated to set the ODEV flag on interlaced
pipelines, thus defining an interlaced stream as having the ODD field
located in the second half (BOTTOM) of the frame buffer.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Kconfig doesn't have license line, thus, it is GPL-2.0 as default.
rcar_du_regs.h, rcar_lvds_regs.h are GPL-2.0,
and all other files are GPL-2.0+ as original license.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Document the R-Car V3H (R8A77980) SoC in the R-Car DU bindings; the DU
hardware has the same topology as in the R-Car V3M (R8A77970).
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
We accidentally forgot to set "ret" on this error path so it means we
return NULL instead of an error pointer. The caller checks for NULL and
changes it to an error pointer so it doesn't cause an issue at run time.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180914065615.GA12043@mwanda
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
