This patch corrects the SPDX License Identifier style
in header files related to Clock Drivers for Renesas Socs.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This variable is no longer used and the compiler rightly complains that
it should be removed. Drop it to silence the following:
drivers/clk/renesas/rcar-gen3-cpg.c: In function 'cpg_sd_clk_register':
drivers/clk/renesas/rcar-gen3-cpg.c:386:15: warning: unused variable 'i' [-Wunused-variable]
unsigned int i;
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: b953eaaeb5 ("clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
cpg_sd_clock_round_rate() may return an unsupported clock rate for the
requested clock rate. Therefore, when cpg_sd_clock_set_rate() sets the
clock rate acquired by cpg_sd_clock_round_rate(), an error may occur.
This is not conform the clk API design.
This patch fixes that by making sure cpg_sd_clock_calc_div() considers
only the division values defined in cpg_sd_div_table[].
With this fix, the cpg_sd_clock_round_rate() always return a support
clock rate.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Fixes: 90c073e539 ("clk: shmobile: r8a7795: Add SD divider support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Testing has shown that the RPC-IF module clock's parent is the RPCD2
clock, not the RPC one -- the RPC-IF register reads stall otherwise...
Fixes: 94e3935b57 ("clk: renesas: r8a77980: Add RPC clocks")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
According to the R-Car Gen3 Hardware Manual Errata for Rev. 1.50 of Feb
12, 2019, the DRIF clocks have been renamed as follows:
DRIF0 to DRIF00
DRIF1 to DRIF01
DRIF2 to DRIF10
DRIF3 to DRIF11
DRIF4 to DRIF20
DRIF5 to DRIF21
DRIF6 to DRIF30
DRIF7 to DRIF31
Therefore, this patch renames the DRIF clocks from DRIFn to DRIFmm.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
The clock sources of the AXI-bus clock (266.66 MHz) used for Audio-DMAC
DMA transfers are:
Channel R-Car H3 R-Car M3-W R-Car M3-N R-Car E3
---------------------------------------------------------------
Audio-DMAC0 S1D2 S1D2 S1D2 S1D2
Audio-DMAC1 S1D2 S1D2 S1D2 -
As a result, change the parent clocks of the Audio-DMAC{0,1} module
clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S1D2, and change the
parent clock of the Audio-DMAC0 module on R-Car E3 to S1D2.
NOTE: This information will be reflected in a future revision of the
R-Car Gen3 Hardware Manual.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[geert: Update R-Car D3, RZ/G2M, and RZ/G2E]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
The clock sources of the AXI BUS clock (266.66 MHz) used for SYS-DMAC
DMA transfers are:
Channel R-Car H3 R-Car M3-W R-Car M3-N
-------------------------------------------------
SYS-DMAC0 S0D3 S0D3 S0D3
SYS-DMAC1 S3D1 S3D1 S3D1
SYS-DMAC2 S3D1 S3D1 S3D1
As a result, change the parent clocks of the SYS-DMAC{1,2} module clocks
on R-Car H3, R-Car M3-W, and R-Car M3-N to S3D1.
NOTE: This information will be reflected in a future revision of the
R-Car Gen3 Hardware Manual.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[geert: Update RZ/G2M]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
According to the R-Car Gen3 Hardware Manual Rev. 1.00, and the RZ/G2
Hardware Manual Rev. 0.61, the parent clock of the HS-USB module
clocks on R-Car Gen3 and RZ/G2 SoCs is S3D2.
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
[takeshi: Update R-Car H3, M3-N, and E3]
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[geert: Update RZ/G2M and RZ/G2E]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
According to the R-Car Gen3 Hardware Manual Rev. 1.00, and the RZ/G2
Hardware Manual Rev. 0.61, the parent clock of the EHCI/OHCI module
clocks on R-Car Gen3 and RZ/G2 SoCs is S3D2.
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
[takeshi: Update R-Car H3, M3-N, and E3]
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[geert: Update RZ/G2M and RZ/G2E]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Support Z and Z2 clocks with parent frequencies greater than UINT32_MAX Hz
(~4.29GHz).
The DIV_ROUND_CLOSEST_ULL() macro accepts a 64bit dividend and 32bit
divisor. This leads to truncation of the divisor, which is the Z or Z2
parent clock frequency in HZ, on platforms where frequency of that clock is
greater than UINT32_MAX Hz.
To resolve this problem the DIV64_U64_ROUND_CLOSEST() macro, which takes
on an unsigned 64bit dividend and divisor, is used.
An earlier version of this patch made use of the existing
DIV_ROUND_CLOSEST() macro, which accepts the prevailing type of the
dividend and divisor. However, this does not compile on 32bit systems, such
as i386 and mips, when called with the types used at this call site, an
unsigned long long dividend and unsigned long divisor.
This work is in preparation for supporting the Z2 clock on the
R-Car Gen3 E3 (r8a77990) SoC which has a 4.8GHz parent clock.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
After recent reworking of Z and Z2 clk handling
CLK_TYPE_GEN3_Z and CLK_TYPE_GEN3_Z2 have come to have precisely
the same meaning. Remove this redundancy by eliminating the latter.
This is not expected to have any run-time effect.
As suggested by Geert Uytterhoeven.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Parameterise the offset of control bits within the FRQCRC register
for Z and Z2 clocks.
This is in preparation for supporting the Z2 clock on the R-Car E3
(r8a77990) SoC which uses a different offset for control bits to
other, already, supported SoCs.
As suggested by Geert Uytterhoeven.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Parameterise Z and Z2 clock fixed divisor to allow clocks with a fixed
divisor other than 2, the value used by all such clocks supported to date.
This is in preparation for supporting the Z2 clock on the R-Car E3
(r8a77990) SoC which has a fixed divisor of 4.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[simon: squashed several patches; rewrote changelog; added r8a774a1 change]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The clock driver is missing support for the clk_pci_usb clock that is
present on the SoC. This is added to allow the clock to be supported.
Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On arm32, there is no reason to use the (soon deprecated) clk_readl().
Hence use the generic readl() instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Explicitly pass the clock's name and register offset to
cpg_sd_clk_register(), so the latter doesn't have to extract them from
the cpg_core_clk object.
This keeps all cpg_core_clk parsing and unmarshalling contained in a
single function (rcar_gen3_cpg_clk_register()).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds the TMU clocks to the R8A774C0 SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it,
as well as the RPC-IF module clock, in the R-Car V3H (R8A77980) CPG/MSSR
driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The RPCSRC internal clock is controlled by the RPCCKCR.DIV[4:3] on all
the R-Car gen3 SoCs except V3M (R8A77970) but the encoding of this field
is different between SoCs; it makes sense to support the most common case
of this encoding in the R-Car gen3 CPG driver...
After adding the RPCSRC clock, we can add the RPC[D2] clocks derived from
it and controlled by the RPCCKCR register on all the R-Car gen3 SoCs except
V3M (R8A77970); the composite clock driver seems handy for this task, using
the spinlock added in the previous patch...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Protect the CPG register read-modify-write sequence with a spinlock.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
There's quite often repeated sequence of a CPG register read-modify-write,
so it seems worth factoring it out into a function -- this saves 68 bytes
of the object code (AArch64 gcc 4.8.5) and simplifies protecting all such
sequences with a spinlock in the next patch...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
According to the RZ/G Series, 2nd Generation Hardware Manual Rev 0.61,
the parent clock of the DU module clocks on RZ/G2E is S1D1.
Fixes: 906e0a4a6d ("clk: renesas: cpg-mssr: Add r8a774c0 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds the missing CANFD clock to the r8a774a1 specific
clock driver.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds the missing CANFD clock to the r8a774c0 specific
clock driver.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.
For instances using of_node_cmp, this has the side effect of now using
case sensitive comparisons. This should not matter for any FDT based
system which all of these are.
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> (clk-mstp)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (ux500)
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk-renesas:
clk: renesas: rcar-gen3: Add HS400 quirk for SD clock
clk: renesas: rcar-gen3: Add documentation for SD clocks
clk: renesas: rcar-gen3: Set state when registering SD clocks
clk: renesas: r8a77995: Simplify PLL3 multiplier/divider
clk: renesas: r8a77995: Add missing CPEX clock
clk: renesas: r8a77995: Remove non-existent SSP clocks
clk: renesas: r8a77995: Remove non-existent VIN5-7 module clocks
clk: renesas: r8a77995: Correct parent clock of DU
clk: renesas: r8a77990: Correct parent clock of DU
clk: renesas: r8a77970: Add CPEX clock
clk: renesas: r8a77965: Add CPEX clock
clk: renesas: r8a7796: Add CPEX clock
clk: renesas: r8a7795: Add CPEX clock
clk: renesas: r8a774a1: Add CPEX clock
dt-bindings: clock: r8a7796: Remove CSIREF clock
dt-bindings: clock: r8a7795: Remove CSIREF clock
clk: renesas: Mark rza2_cpg_clk_register static
clk: renesas: r7s9210: Add USB clocks
clk: renesas: r8a77970: Add RPC clocks
clk: renesas: r7s9210: Add SDHI clocks
* clk-allwinner:
clk: sunxi-ng: a64: Allow parent change for VE clock
clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for all audio module clocks
clk: sunxi-ng: a33: Use sigma-delta modulation for audio PLL
clk: sunxi-ng: h3: Allow parent change for ve clock
clk: sunxi-ng: add support for suniv F1C100s SoC
dt-bindings: clock: Add Allwinner suniv F1C100s CCU
clk: sunxi-ng: h3/h5: Fix CSI_MCLK parent
clk: sunxi-ng: r40: Force LOSC parent to RTC LOSC output
clk: sunxi-ng: sun50i: a64: Use sigma-delta modulation for audio PLL
clk: sunxi-ng: a64: Fix gate bit of DSI DPHY
clk: sunxi-ng: Enable DE2_CCU for SUN8I and SUN50I
clk: sunxi-ng: Add support for H6 DE3 clocks
dt-bindings: clock: sun8i-de2: Add H6 DE3 clock description
clk: sunxi-ng: h6: Set video PLLs limits
clk: sunxi-ng: Use u64 for calculation of NM rate
clk: sunxi-ng: Adjust MP clock parent rate when allowed
clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width
clk: sunxi-ng: enable so-said LDOs for A64 SoC's pll-mipi clock
* clk-tegra:
clk: tegra: Return the exact clock rate from clk_round_rate
clk: tegra30: Use Tegra CPU powergate helper function
soc/tegra: pmc: Drop SMP dependency from CPU APIs
clk: tegra: Fix maximum audio sync clock for Tegra124/210
clk: tegra: get rid of duplicate defines
clk: tegra20: Check whether direct PLLM sourcing is turned off for EMC
clk: tegra20: Turn EMC clock gate into divider
* clk-meson: (25 commits)
clk: meson: axg-audio: use the clk input helper function
clk: meson: add clk-input helper function
clk: meson: Mark some things static
clk: meson: meson8b: add the read-only video clock trees
clk: meson: meson8b: add the fractional divider for vid_pll_dco
clk: meson: meson8b: fix the offset of vid_pll_dco's N value
clk: meson: Fix GXL HDMI PLL fractional bits width
clk: meson: meson8b: add the CPU clock post divider clocks
clk: meson: meson8b: rename cpu_div2/cpu_div3 to cpu_in_div2/cpu_in_div3
clk: meson: clk-regmap: add read-only gate ops
clk: meson: meson8b: allow changing the CPU clock tree
clk: meson: meson8b: run from the XTAL when changing the CPU frequency
clk: meson: meson8b: add support for more M/N values in sys_pll
clk: meson: meson8b: mark the CPU clock as CLK_IS_CRITICAL
clk: meson: meson8b: do not use cpu_div3 for cpu_scale_out_sel
clk: meson: clk-pll: check if the clock is already enabled
clk: meson: meson8b: fix the width of the cpu_scale_div clock
clk: meson: meson8b: fix incorrect divider mapping in cpu_scale_table
clk: meson: meson8b: use the HHI syscon if available
dt-bindings: clock: meson8b: use the registers from the HHI syscon
...
* clk-rockchip:
clk: rockchip: add clock-id to gate of ACODEC for rk3328
clk: rockchip: add clock ID of ACODEC for rk3328
clk: rockchip: fix ID of 8ch clock of I2S1 for rk3328
clk: rockchip: fix I2S1 clock gate register for rk3328
clk: rockchip: make rk3188 hclk_vio_bus critical
clk: rockchip: fix rk3188 sclk_mac_lbtest parameter ordering
clk: rockchip: fix rk3188 sclk_smc gate data
clk: rockchip: fix typo in rk3188 spdif_frac parent
This flag doesn't look to be used by any code, just set in various clk
init structures and then never tested again. Remove it from these
drivers as it doesn't provide any benefit.
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: <linux-renesas-soc@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
On H3 (ES1.x, ES2.0) and M3-W (ES1.0, ES1.1) the clock setting for HS400
needs a quirk to function properly. The reason for the quirk is that
there are two settings which produces same divider value for the SDn
clock. On the effected boards the one currently selected results in
HS400 not working.
This change uses the same method as the Gen2 CPG driver and simply
ignores the first clock setting as this is the offending one when
selecting the settings. Which of the two possible settings is used have
no effect for SDR104.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the known use cases of the different clock settings. This is
useful as different SoC and ES versions use different settings to do
the same thing as there is more than one combination to achieve the
same SDn clock speed.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The driver tries to figure out which state a SD clock is in when the
clock is registered, instead of setting a known state. This can be
problematic for two reasons.
1. If the clock driver can't figure out the state of the clock,
registration of the clock fails, and setting of a known state by a
clock user is not possible.
2. The state of the clock depends on if and how the bootloader
configured it. The driver only checks that the rate is known, not if
the clock is stopped or not for example.
Fix this by setting a known state and making sure the clock is stopped.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018) added
the CPEX clock on R-Car D3. This clock can be selected as a clock
source for CMT1 (Compare Match Timer Type 1).
Add the missing clock to the DT bindings header, and implement support
for it in the clock driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Dec 22, 2017, and
Feb 28, 2018) removed the SSPSRC, SSP1, and SSP2 clocks on R-Car D3, as
this SoC does not have a Stream and Security Processor.
As these definitions were never used, they can just be removed.
The freed slots in the DT bindings header must not be reused, though.
Fixes: 714c53aa2e ("clk: renesas: Add r8a77995 CPG Core Clock Definitions")
Fixes: d71e851d82 ("clk: renesas: cpg-mssr: Add R8A77995 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
R-Car Gen3 Hardware Manual Errata for Rev 0.80 of February 28, 2018,
removed the module clocks for the Video Input Module (VIN) channels 5-7
on R-Car D3, as they do not exist on this SoC.
Fixes: d71e851d82 ("clk: renesas: cpg-mssr: Add R8A77995 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
According to the R-Car Gen3 Hardware Manual Rev 1.00, the parent clock
of the DU module clocks on R-Car D3 is S1D1.
Fixes: d71e851d82 ("clk: renesas: cpg-mssr: Add R8A77995 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
According to the R-Car Gen3 Hardware Manual Rev 1.00, the parent clock
of the DU module clocks on R-Car E3 is S1D1.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Fixes: 3570a2af47 ("clk: renesas: cpg-mssr: Add support for R-Car E3")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Implement support for the CPEX clock on R-Car V3M. This clock can be
selected as a clock source for CMT1 (Compare Match Timer Type 1).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Implement support for the CPEX clock on R-Car M3-N. This clock can be
selected as a clock source for CMT1 (Compare Match Timer Type 1).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Implement support for the CPEX clock on R-Car M3-W. This clock can be
selected as a clock source for CMT1 (Compare Match Timer Type 1).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Implement support for the CPEX clock on R-Car H3. This clock can be
selected as a clock source for CMT1 (Compare Match Timer Type 1).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Implement support for the CPEX clock on RZ/G2M. This clock can be
selected as a clock source for CMT1 (Compare Match Timer Type 1).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
This is only used in this file, so mark it static to silence a sparse
warning.
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
