Commit Graph

555 Commits

Author SHA1 Message Date
Uwe Kleine-Koenig
0c2732152a hwmon: (mc13783-adc) Add support for the MC13892 PMIC
Based on a patch by David Jander that mostly did s/mc13783/mc13xxx/ .

Additionally use dev_get_drvdata instead of to_platform_device +
platform_get_drvdata in mc13783_adc_read (spotted by Jean Delvare).

Cc: David Jander <david.jander@protonic.nl>
Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-23 10:02:19 +01:00
Guenter Roeck
ae544f64cc hwmon: (lm90) Add support for GMT G781
GMT G781 is a ADM1032-compatible temperature sensor chip.
Add support to the LM90 driver.

Cc: Mike Gorchak <lestat@i.com.ua>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-23 10:02:18 +01:00
Linus Torvalds
31f6765266 hwmon changes for v3.4
Mostly cleanup. No new drivers this time around, but support for several chips
 added to existing drivers: TPS40400, TPS40422, MTD040, MAX34446, ZL9101M,
 ZL9117M, and LM96080. Also, added watchdog support for SCH56xx, and additional
 attributes for a couple of drivers.
 
 312869e hwmon: (sch56xx) Add support for the integrated watchdog (v2)
 840e191 hwmon: (w83627ehf) Add support for temperature offset registers
 86dda17 hwmon: (jc42) Remove unnecessary device IDs
 3360a10 hwmon: (zl6100) Add support for ZL9101M and ZL9117M
 9271126 hwmon: (adm1275) Add support for ADM1075
 590defe hwmon: (max34440) Add support for MAX34446
 60b873e hwmon: (pmbus) Add more virtual registers
 2163340 hwmon: (pmbus) Add support for Lineage Power MDT040
 c5f35c9 hwmon: (pmbus) Add support for TI TPS40400 and TPS40422
 56aad5d hwmon: (max34440) Add support for 'lowest' output voltage attribute
 f15df57 hwmon: (jc42) Convert to use devm_kzalloc
 918ddef hwmon: (max16065) Convert to use devm_kzalloc
 b8a5a7c hwmon: (smm665) Convert to use devm_kzalloc
 3683928 hwmon: (ltc4261) Convert to use devm_kzalloc
 dd285ad hwmon: (pmbus) Simplify remove functions
 8b313ca hwmon: (pmbus) Convert pmbus drivers to use devm_kzalloc
 07404aa hwmon: (lineage-pem) Convert to use devm_kzalloc
 f352df6 hwmon: (hwmon-vid) Fix checkpatch issues
 3230f70 hwmon: (hwmon-vid) Add new entries to VRM model table
 9908ad4 hwmon: (lm80) Add detection of NatSemi/TI LM96080
 0e190b7 hwmon: (lm87) Get rid of macro-generated functions
 8652a26 hwmon: (lm87) Reorganize the code
 0fc86ec hwmon: (applesmc) Silence uninitialized warnings
 7599d32 hwmon: (lm70) Fix: do not use assignment in if condition
 e200c14 hwmon: (lm70) Register hwmon device after creating attribute files, and remove it first
 01d9def hwmon: (w83l786ng) Fix multi-line comments
 130067d hwmon: (w83l785ts) Fix multi-line comments
 7950133 hwmon: (w83781d) Fix: do not use assignment in if condition
 aff6e00 hwmon: (w83781d) Fix multi-line comments
 2a52dd6 hwmon: (smsc47b397) Fix multi-line comments
 36564ef hwmon: (pc87427) Fix multi-line comments
 b6707b7 hwmon: (max1668) Fix multi-line comments
 1160631 hwmon: (lm80) Fix multi-line comments
 bf0f3a0 hwmon: (emc2103) Fix multi-line comments
 fbb6670 hwmon: (adm1031) Fix multi-line comments
 94b991d hwmon: (adm1029) Fix multi-line comments
 27b9de3 hwmon: (w83627hf) Fix checkpatch issues
 ca3ccad hwmon: (w83l786ng) Fix checkpatch issues
 47efe87 hwmon: (w83793) Fix checkpatch issues
 d174368 hwmon: (w83792d) Fix checkpatch issues
 2185696 hwmon: (vt1211) Fix: do not use assignment in if condition
 b162c03 hwmon: (vt1211) Fix checkpatch issues
 9004ac8 hwmon: (via686a) Fix checkpatch issues
 bce2778 hwmon: (pc87360) Fix: do not use assignment in if condition
 449a7a0 hwmon: (pc87360) Fix checkpatch issues
 8958dfb hwmon: (max1619): Fix checkpatch issues
 09770b2 hwmon: (lm85) Fix checkpatch issues
 9b03079 hwmon: (lm78) Fix checkpatch issues
 02fe2fd hwmon: (lm77) Fix checkpatch issues
 f445a9a hwmon: (gl520sm) Fix: do not use assignment in if condition
 43da3d1 hwmon: (gl520sm) Fix checkpatch issues
 228f8e0 hwmon: (gl518sm) Fix checkpatch issues
 c8de836 hwmon: (dme1737) Fix checkpatch issues
 8c10369 hwmon: (asb100): Fix checkpatch issues
 c387e4e hwmon: (adm9240) Fix checkpatch issues
 86aa3e2 hwmon: (adm1026) Fix checkpatch issues
 21d2a8f hwmon: (adm1021) Fix checkpatch issues
 1bd385d hwmon: (abituguru) Fix checkpatch issues
 8969e84 hwmon: (w83627ehf) Fix multi-line comments
 51683ee hwmon: (max1111) Fix multi-line comments
 1b05d22 hwmon: (ltc4151) Fix multi-line comments
 1b9c491 hwmon: (g760a) Fix multi-line comments
 20eaf72 hwmon: (f71882fg) Fix multi-line comments
 4bebced hwmon: (emc1403) Fix multi-line comments
 ca3c7b6 hwmon: (amc6821) Fix multi-line comments
 10775d1 hwmon: (ads7871) Fix multi-line comments
 d13d623 hwmon: (ads7828) Fix multi-line comments
 562fca2 hwmon: (abituguru3) Fix multi-line comments
 ec1c319 hwmon: (w83791d) Fix checkpatch issues
 a80b10c hwmon: (ultra45_env) Fix checkpatch issues
 4d387df hwmon: (thmc50) Fix checkpatch issues
 85a0c0d hwmon: (smsc47m1) Fix checkpatch issues
 7e61268 hwmon: (smsc47m1) Fix: do not use assignment in if condition
 7cc3cb6 hwmon: (smsc47m192) Fix checkpatch issues
 8fda79e hwmon: (sis5595) Fix checkpatch issues
 5725608 hwmon: (pcf8591) Fix checkpatch issues
 2804a4c hwmon: (lm93) Fix checkpatch issues
 a318afd hwmon: (lm92) Fix checkpatch issues
 073f1e6c hwmon: (lm87) Fix: do not use assignment in if condition
 c6370db hwmon: (lm87) Fix checkpatch issues
 525ad37 hwmon: (fschmd) Fix checkpatch issues
 f24d548 hwmon: (atxp1) Fix checkpatch issues
 724cc33 hwmon: (adt7462) Fix checkpatch issues
 790fa38 hwmon: (ltc4215) Fix multi-line comments
 430b4fc hwmon: (ltc4245) Fix multi-line comments
 a68abd3 hwmon: (wm8350-hwmon) Constify fixed string array
 85ebfd3 hwmon: (applesmc) Fix multi-line comments
 75bdc93 hwmon: (asus_atk0110) Fix multi-line comments
 3c4c497 hwmon: (it87) Constify fixed string arrays
 8deeac8 hwmon: (ad7414) Fix multi-line comments
 5d577db hwmon: (jc42) Fix multi-line comments
 780affe hwmon: (coretemp) Fix checkpatch error
 3af2861 hwmon: (pc87360) Fix multi-line comments
 07de3df hwmon: (wm831x-hwmon) Fix multi-line comments
 3c22e23 hwmon: (smm665) Fix checkpatch error
 3c56b06 hwmon: (asc7621) Fix multi-line comments
 4a0d71c hwmon: (it87) Fix multi-line comments
 86d566e hwmon: (hwmon-vid) Fix multi-line comments
 5ed0488 hwmon: (hwmon) Fix multi-line comments
 19f2c05 hwmon: (ds1621) Fix checkpatch issues
 91efffe hwmon: convert drivers/hwmon/* to use module_spi_driver()
 f0967ee hwmon: convert drivers/hwmon/* to use module_i2c_driver()
 61ba031 hwmon: (vt8231) Fix multi-line comments
 9ed5bc2 hwmon: (adt7475) Fix multi-line comments
 2fff084 hwmon: (f71805f) Fix checkpatch issues
 703af96 hwmon: (max6650) Fix multi-line comments
 c531eb3 hwmon: (w83781d) Fix checkpatch issues
 2b22de5 hwmon: (adm1025) Fix checkpatch issues
 7973841 hwmon: (abituguru3) Fix checkpatch issues
 65fe5c7 hwmon: (vt8231) Fix checkpatch issues
 bafda5d hwmon: (max6650) Fix checkpatch issues
 0117c3f hwmon: (pmbus) Replace strict_strtol with kstrtol
 b3789a0 hwmon: (lm83) fix checkpatch issues
 93092a6 hwmon: (k8temp) fix checkpatch issues
 96585f1 hwmon: (lm80) reset device if error occurred
 6a9e7c4c hwmon: (lm80) fix checkpatch warnings
 6b904b6 hwmon: (adt7470) fix checkpatch issues
 e6a83db hwmon: (adt7411) fix checkpatch issues
 56c24af hwmon: (lm70) fix checkpatch issues
 1dc3708 hwmon: (f71882fg) fix checkpatch issues
 c6e8ac0 hwmon: (asus_atk0110) fix checkpatch issues
 99b8c83 hwmon: (adt7475) fix checkpatch issues
 b2ae8f8 hwmon: (smm665) fix checkpatch issues
 c9e1498 hwmon: (sht15) fix checkpatch issues
 0910b28 hwmon: (ibmaem) fix checkpatch issues
 dcb7cb9 hwmon: (ad7414) fix checkpatch issues
 e91aef2 hwmon: (ad7418) fix checkpatch issues
 5996542 hwmon: (w83l785ts) fix checkpatch issues
 a6100f6 hwmon: (wm831x-hwmon) fix checkpatch issues
 839a9ee hwmon: fix checkpatch issues
 08f5090 hwmon: (adm1029) fix checkpatch issues
 4d7c5d4 hwmon: (g760a) fix checkpatch issues
 7b102ed hwmon: (i5k_amb) fix checkpatch issues
 600151b hwmon: use DEFINE_PCI_DEVICE_TABLE
 7fe83ad hwmon: remove () used with return
 a6bee4a hwmon: (amc6821) fix initialisation
 2faaa93 hwmon: (lm80) add error handling
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJPaJBFAAoJEMsfJm/On5mBhkMP/09vlmsG7J3TLHcSKYJBkvSx
 6VNOOJgPqnvF71Az0dX47SU3zVXhG3I7dZufd/hqOK+0CNylSB7OSZMcWvBTduea
 0hDLTYj++SyVDQfVXb3zCVLU/wAE3YuXB3umWPwAKit4s2wAYYRDVCjwK96B88rv
 llNvo6JryuJDBUq7xiEmr0vKWMO0mKwwjpMTGCD3NpzK02ZV49T0gM94xa4gi5nM
 QAhNeO1AzQTx0+mBSRlq+SBBLSiXQmHcNrhnxcRMPha1bEi1D+QESozsczr+9/lz
 8vuTIULOIZxafM4XkBsZdknvlZnYrA6ukituDfVfiYQVcljO/cNu+seutFQDCMJe
 1zTDoNGIAwwnw0sAWWmTQwUMi+GSvlaL20gmm8FhTlvQaj9hNETsPYxEvPEsBNY1
 ICCixZcwpa1mZBXmryz2btf8az0OlX/sApzyHiq24B7lSE5Fv4tBDtwypLRu5N8m
 C4oNXC2dqDU0gtVxzO5Lavu6LHWV9lhyZvRPO75+zxYt4i5cnO04GTAYWh46aOzO
 DAZcs8M2Rj++dI5VW9Vl0k8hP9eWjxtPJFhNv/OWTx4YYQRICrde+j7QZcikIUWF
 0bzYI/zeIcwOg059vhnglBFM3mr7Z92jm4mftcNaSj/zuUHbWf6AQLbIq86Zq7tF
 3Eru3WuTZTwAkyNAVWd5
 =cUoW
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon changes for v3.4 from Guenter Roeck:
 "Mostly cleanup.  No new drivers this time around, but support for
  several chips added to existing drivers: TPS40400, TPS40422, MTD040,
  MAX34446, ZL9101M, ZL9117M, and LM96080.  Also, added watchdog support
  for SCH56xx, and additional attributes for a couple of drivers."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (137 commits)
  hwmon: (sch56xx) Add support for the integrated watchdog (v2)
  hwmon: (w83627ehf) Add support for temperature offset registers
  hwmon: (jc42) Remove unnecessary device IDs
  hwmon: (zl6100) Add support for ZL9101M and ZL9117M
  hwmon: (adm1275) Add support for ADM1075
  hwmon: (max34440) Add support for MAX34446
  hwmon: (pmbus) Add more virtual registers
  hwmon: (pmbus) Add support for Lineage Power MDT040
  hwmon: (pmbus) Add support for TI TPS40400 and TPS40422
  hwmon: (max34440) Add support for 'lowest' output voltage attribute
  hwmon: (jc42) Convert to use devm_kzalloc
  hwmon: (max16065) Convert to use devm_kzalloc
  hwmon: (smm665) Convert to use devm_kzalloc
  hwmon: (ltc4261) Convert to use devm_kzalloc
  hwmon: (pmbus) Simplify remove functions
  hwmon: (pmbus) Convert pmbus drivers to use devm_kzalloc
  hwmon: (lineage-pem) Convert to use devm_kzalloc
  hwmon: (hwmon-vid) Fix checkpatch issues
  hwmon: (hwmon-vid) Add new entries to VRM model table
  hwmon: (lm80) Add detection of NatSemi/TI LM96080
  ...
2012-03-21 10:37:25 -07:00
Linus Torvalds
69a7aebcf0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "It's indeed trivial -- mostly documentation updates and a bunch of
  typo fixes from Masanari.

  There are also several linux/version.h include removals from Jesper."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
  kcore: fix spelling in read_kcore() comment
  constify struct pci_dev * in obvious cases
  Revert "char: Fix typo in viotape.c"
  init: fix wording error in mm_init comment
  usb: gadget: Kconfig: fix typo for 'different'
  Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
  writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
  writeback: fix typo in the writeback_control comment
  Documentation: Fix multiple typo in Documentation
  tpm_tis: fix tis_lock with respect to RCU
  Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
  Doc: Update numastat.txt
  qla4xxx: Add missing spaces to error messages
  compiler.h: Fix typo
  security: struct security_operations kerneldoc fix
  Documentation: broken URL in libata.tmpl
  Documentation: broken URL in filesystems.tmpl
  mtd: simplify return logic in do_map_probe()
  mm: fix comment typo of truncate_inode_pages_range
  power: bq27x00: Fix typos in comment
  ...
2012-03-20 21:12:50 -07:00
Hans de Goede
312869ec93 hwmon: (sch56xx) Add support for the integrated watchdog (v2)
Add support for the watchdog integrated into the SMSC SCH5627 and
SCH5636 superio-s. Since the watchdog is part of the hwmon logical device
and thus shares ioports with it, the watchdog driver is integrated into the
existing hwmon drivers for these.

Note that this version of the watchdog support for sch56xx superio-s
implements the watchdog chardev interface itself, rather then relying on
the recently added watchdog core / watchdog_dev. This is done because
currently some needed functionality is missing from watchdog_dev, as soon
as this functionality is added (which is being discussed on the
linux-watchdog mailinglist), I'll convert this driver over to using
watchdog_dev.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[guenter.roeck@ericsson.com: Added missing linux/slab.h include]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-20 06:42:05 -07:00
Guenter Roeck
86dda17634 hwmon: (jc42) Remove unnecessary device IDs
We don't really use or need separate device IDs for the various JC42.4 compliant
chips, so remove them and just stick with jc42.

Also update a datasheet references for SE98A, STTS424, and STTS424E02.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-18 18:27:53 -07:00
Guenter Roeck
3360a106f8 hwmon: (zl6100) Add support for ZL9101M and ZL9117M
ZL9101M and ZL9117M are compatible to ZL6100. Add support to the zl6100 driver.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-18 18:27:53 -07:00
Guenter Roeck
9271126966 hwmon: (adm1275) Add support for ADM1075
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:27:52 -07:00
Guenter Roeck
590defe59e hwmon: (max34440) Add support for MAX34446
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:27:52 -07:00
Guenter Roeck
216334094a hwmon: (pmbus) Add support for Lineage Power MDT040
MDT040 is supported by the generic PMBus driver. Add device ID and reference to
datasheet. Also mention Lineage Power device support in Kconfig.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:27:50 -07:00
Guenter Roeck
c5f35c9d82 hwmon: (pmbus) Add support for TI TPS40400 and TPS40422
TPS40400 and TPS40422 are supported by the generic PMBus driver.
Add device IDs and data sheet references.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:27:50 -07:00
Guenter Roeck
56aad5d143 hwmon: (max34440) Add support for 'lowest' output voltage attribute
MAX34440 and compatibles support reporting the lowest measured output voltage.
Add support for it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-18 18:27:49 -07:00
Jean Delvare
9908ad4cd4 hwmon: (lm80) Add detection of NatSemi/TI LM96080
Add detection of the National Semiconductor (now Texas Instruments)
LM96080. It is functionally compatible with the LM80 but detection is
completely different.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-18 18:27:43 -07:00
Guenter Roeck
fecfb64422 hwmon: (zl6100) Enable interval between chip accesses for all chips
Intersil reports that all chips supported by the zl6100 driver require
an interval between chip accesses, even ZL2004 and ZL6105 which were thought
to be safe.

Reported-by: Vivek Gani <vgani@intersil.com>
Cc: stable@vger.kernel.org # 3.2+
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-14 09:17:03 -07:00
Guenter Roeck
c43524b580 hwmon: (w83627ehf) Describe undocumented pwm attributes
Add description of pwm[1-4]_start_output, pwm[1-4]_step_output,
pwm[1-4]_stop_output, and pwm[1-4]_max_output attributes to driver
documentation.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-13 03:48:07 -07:00
Jean Delvare
aacb6b0052 hwmon: (w83627ehf) Fix temp2 source for W83627UHG
Properly set the source of temp2 for the W83627UHG. Also fix a
comment right before that, and document the W83627UHG as reporting up
to 3 temperatures.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-13 03:30:56 -07:00
Guenter Roeck
1bd612a258 hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804
Also update IDT datasheet locations.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org # 3.0+
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-07 09:48:44 -08:00
Jean Delvare
4de86126a7 hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000
These are fully compatible with Jedec JC 42.4 as far as I can see.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-07 09:48:21 -08:00
Masanari Iida
40e47125e6 Documentation: Fix multiple typo in Documentation
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-07 16:08:24 +01:00
Guenter Roeck
5f8b1f877e hwmon: (sysfs-interface) Update tempX_type attribute to be more generic
The temp[1-*]_type attribute reports the temperature sensor type. Sensor type 1
is described as "PII/Celeron Diode", which is quite restrictive; other CPUs
may also have an embedded temperature sensor diode with similar characteristics.
Change description to "CPU embedded diode" to be more generic.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16 22:51:48 +01:00
Jean Delvare
16b5dda22e hwmon: (it87) Add IT8728F support
Until we get a datasheet for the IT8728F, treat it as fully compatible
with the IT8721F, as it seems to work reasonably well.

This closes kernel bug #27262.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16 22:51:48 +01:00
Jean Delvare
d216f6809e hwmon: (lm63) Expose automatic fan speed control lookup table
The LM63 and compatible devices have a lookup table to control the fan
speed automatically. Expose it in sysfs. Values are cached for 5
seconds, independently of the other register values to avoid slowing
down "sensors". We might make the table values writable in the future.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16 22:51:47 +01:00
Jean Delvare
409c0b5bdf hwmon: (lm63) LM64 has a dedicated pin for tachometer
On the LM64, the tachometer function has a dedicated pin and fan speed
monitoring is always enabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16 22:51:46 +01:00
Guenter Roeck
f496b2d4f1 hwmon: (lm63) Add sensor type attribute for external sensor on LM96163
On LM96163, the external temperature sensor type is configurable to
either a thermal diode or a 3904 transistor. The chip reports a wrong
temperature if misconfigured. Add writable attribute to support it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16 22:51:46 +01:00
Guenter Roeck
04738b2b2f hwmon: (lm63) Add support for update_interval sysfs attribute
The update interval is configurable on LM63 and compatibles. Add
support for it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16 22:51:46 +01:00
Guenter Roeck
210961c436 hwmon: (lm63) Add support for LM96163
LM96163 is an enhanced version of LM63 with improved PWM resolution. Add chip
detection code as well as support for improved PWM resolution if the chip is
configured to use it.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16 22:51:45 +01:00
Guenter Roeck
443830f6fd hwmon: (pmbus/zl6100) Add support for Ericsson BMR45[0,1] and BMR46[2,3,4]
Add support for Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464, which are
based on ZL2005 and ZL2008, to zl6100 driver. Remove BMR450 and BMR451 device
IDs from generic PMBus driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-05 08:19:28 -08:00
Guenter Roeck
bc581e6fcc hwmon: (pmbus/zl6100) Add support for ZL2005
Add explicit support for ZL2005. Functionality is almost the same as with other
Zilker Labs / Intersil chips, but limit register detection does not work reliably.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-05 08:19:27 -08:00
Jean Delvare
eff7687d47 hwmon: (w83627ehf) Add support for the W83627UHG
This is essentially a stripped down version of the W83627DHG. Noticeable
difference is that it is still powered with +5V, as older models, even
though the ADC resolution is 8 mV as newer models have.

Thanks to Ulf Bruman (Saab Group) for doing all the testing.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04 12:00:48 +01:00
Jean Delvare
426343ef34 hwmon: (lm75) Document why clones are not detected
Explain why clones of the LM75 are generally not detected by the
driver, and why this isn't going to change. Also update the
documentation to reflect the list of chip names currently supported by
the driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24 11:09:47 -07:00
Michael Hennerich
e96f9d89e6 hwmon: (lm75) Add support for Analog Devices ADT75
Add datasheet reference and device ID for ADT75.

The ADT75, like some other LM75 derivatives, needs to be instantiated
using methods 1, 2, or 4.
For more information see Documentation/i2c/instantiating-devices.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24 11:09:45 -07:00
Guenter Roeck
bc365a7f3c hwmon: (pmbus) Add support for Lineage Power DC-DC converters
Add device IDs and reference to datasheets for Lineage Power DC-DC converters.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24 11:09:44 -07:00
Guenter Roeck
ddfb41ca2a hwmon: (pmbus/ltc2978) Add support for LTC3880 to LTC2978 driver
The LTC3880 PMBus command set is comparable to LTC2978. Add support for it
to the LTC2978 driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24 11:09:43 -07:00
Guenter Roeck
c3ff9a674c hwmon: (pmbus/ltc2978) Explicit driver for LTC2978
Provide explicit driver for LTC2978 to enable support for minimum and peak
attributes. Remove ltc2978 chip id from generic pmbus driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24 11:09:42 -07:00
Jonathan Cameron
4f3a659581 hwmon: AD7314 driver (ported from IIO)
Driver for AD7314, ADT7301, and ADT7302, ported from IIO.

Currently dropped power down mode support.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
[guenter.roeck@ericsson.com: Added MODULE_DEVICE_TABLE]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24 11:09:41 -07:00
Guenter Roeck
200855e52d hwmon: (pmbus) Add support for Intersil power management chips
Add support for Intersil / Zilker Labs ZL2004, ZL2006, ZL2008, ZL2105, ZL2106,
ZL6100, and ZL6105.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24 11:09:40 -07:00
Guenter Roeck
ced29d4225 hwmon: (pmbus) Provide more documentation
Provide more documentation describing PMBus driver functionality and the API
between the PMBus core driver and PMBus chip drivers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24 11:09:38 -07:00
Donggeun Kim
9d97e5c81e hwmon: Add driver for EXYNOS4 TMU
This patch allows to read temperature
from TMU(Thermal Management Unit) of SAMSUNG EXYNOS4 series of SoC.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24 11:09:35 -07:00
Guenter Roeck
5cf231a346 hwmon: (pmbus/adm1275) Add support for ADM1276
ADM1276 is mostly compatible to ADM1275, with added support for input power
measurement. Add support for it to the ADM1275 driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-10-24 11:09:35 -07:00
Guenter Roeck
c5e6763667 hwmon: (pmbus/adm1275) Add support for second current limit
ADM1275 supports a second current limit, which can be configured as either lower
or upper limit. Add support for it and report it as either lower or upper
critical current limit.

Also replace error return code EINVAL for unsupported pages with ENXIO as this
is more appropriate for the observed condition.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-10-24 11:09:34 -07:00
Guenter Roeck
f4af6fd6e2 hwmon: (coretemp) Don't use threshold registers for tempX_max
With commit c814a4c7c4, the meaning of tempX_max
was changed. It no longer returns the value of bits 8:15 of
MSR_IA32_TEMPERATURE_TARGET, but instead returns the value of CPU threshold
register T1. tempX_max_hyst was added to reflect the value of temperature
threshold register T0.

As it turns out, T0 and T1 are used on some systems, presumably by the BIOS.
Also, T0 and T1 don't have a well defined meaning. The thresholds may be used
as upper or lower limits, and it is not guaranteed that T0 <= T1. Thus, the new
attribute mapping does not reflect the actual usage of the threshold registers.
Also, register contents are changed during runtime by an entity other than the
hwmon driver, meaning the values cached by the driver do not reflect actual
register contents.

Revert most of c814a4c7c4 to address the problem.
Support for T0 and T1 will be added back in with a separate commit, using new
attribute names.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-09-21 17:25:18 -07:00
Jean Delvare
a45a8c8571 hwmon: (coretemp) Let the user force TjMax
On old CPUs (and even some recent Atom CPUs) TjMax can't be read from
the CPU registers, so it is guessed by the driver using a complex
heuristic which isn't reliable. So let users who know their CPU's
TjMax pass it as a module parameter.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "R, Durgadoss" <durgadoss.r@intel.com>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Alexander Stein <alexander.stein@systec-electronic.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-09-21 17:25:18 -07:00
Guenter Roeck
d91aae1e52 hwmon: (max16065) Add chip access warning to documentation
The chips supported by the max16065 driver should not be accessed using direct
i2ctools commands. Add warning to driver documentation to alert users.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-09-06 08:56:06 -07:00
Linus Torvalds
464c9098bb Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (24 commits)
  hwmon: (lm90) Refactor reading of config2 register
  hwmon: (lm90) Make SA56004 detection more robust
  hwmon: (lm90) Simplify handling of extended local temp register
  hwmon: (pmbus) Add client driver for LM25066, LM5064, and LM5066
  hwmon: (max34440) Add support for peak attributes
  hwmon: (max8688) Add support for peak attributes
  hwmon: (max16064) Add support for peak attributes
  hwmon: (adm1275) Add support for peak attributes
  hwmon: (pmbus) Add support for peak attributes
  hwmon: Add new attributes to sysfs ABI
  hwmon: (pmbus) Strengthen check for status register existence
  hwmon: (pmbus) Add support for virtual pages
  hwmon: (pmbus) Support reading and writing of word registers in device specific code
  hwmon: (pmbus) Increase attribute name size
  hwmon: (pmbus) Add ADP4000, NCP4200 and NCP4208 to list of supported devices
  hwmon: (pmbus) Add support for VID output voltage mode
  hwmon: (pmbus) Move PMBus drivers to drivers/hwmon/pmbus
  hwmon: (coretemp) Add core/pkg threshold support to Coretemp
  hwmon: (lm95241) Add support for LM95231
  hwmon: LM95245 driver
  ...
2011-07-30 08:57:57 -10:00
Guenter Roeck
03e9bd8dbc hwmon: (pmbus) Add client driver for LM25066, LM5064, and LM5066
PMBus client driver supporting National Semiconductor LM25066, LM5064, and LM5066.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-07-28 20:16:17 -07:00
Guenter Roeck
98591dbe63 hwmon: (max34440) Add support for peak attributes
Add support for voltage, current, and temperature peak (historic maximum)
attributes.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-07-28 17:09:54 -07:00
Guenter Roeck
70e94b276c hwmon: (max8688) Add support for peak attributes
Add support for voltage, current, and temperature peak (historic maximum)
attributes.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28 17:09:53 -07:00
Guenter Roeck
8ebed85450 hwmon: (max16064) Add support for peak attributes
Add support for voltage and temperature peak (historic maximum) attributes.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-07-28 17:09:53 -07:00
Guenter Roeck
c576e30cd0 hwmon: (adm1275) Add support for peak attributes
Add support for voltage and current peak (historic maximum) attributes.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-07-28 17:09:52 -07:00
Guenter Roeck
0084e9faab hwmon: Add new attributes to sysfs ABI
Add the following attributes to the sysfs ABI.

in[0-*]_average
in[0-*]_lowest
in[0-*]_highest
in[0-*]_reset_history
in_reset_history

curr[1-*]_average
curr[1-*]_lowest
curr[1-*]_highest
curr[1-*]_reset_history
curr_reset_history

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-07-28 17:02:41 -07:00
Guenter Roeck
e0455e380b hwmon: (pmbus) Add ADP4000, NCP4200 and NCP4208 to list of supported devices
Add ADP4000, NCP4200 and NCP4208 to the list of devices supported by the generic
PMBus driver, and add device IDs to enable explicit instantiation.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-07-28 15:31:18 -07:00
Durgadoss R
c814a4c7c4 hwmon: (coretemp) Add core/pkg threshold support to Coretemp
This patch adds the core and pkg support to coretemp.
These thresholds can be configured via the sysfs interfaces tempX_max
and tempX_max_hyst. An interrupt is generated when CPU temperature reaches
or crosses above tempX_max OR drops below tempX_max_hyst.

This patch is based on the documentation in IA Manual vol 3A, that can be
downloaded from here:
http://download.intel.com/design/processor/manuals/253668.pdf

Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28 00:17:36 -07:00
Alexander Stein
fffd80ccc1 hwmon: LM95245 driver
A hwmon driver for the National Semiconductor LM95245 dual temperature
sensors chip.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28 00:17:35 -07:00
Stijn Devriendt
2ef017935d hwmon: (lm90) Add support for Philips SA56004
Add support for Philips SA56004, an LM86 compatible temperature sensor.

Signed-off-by: Stijn Devriendt <sdevrien@cisco.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28 00:17:34 -07:00
Donggeun Kim
f22aaaa70d hwmon: Driver for NTC Thermistors
Add support for NTC Thermistor series. In this release, the
following thermistors are supported: NCP15WB473, NCP18WB473, NCP03WB473,
and NCP15WL333. This driver is based on the datasheet of MURATA.

The driver in the patch does conversion from the raw ADC value
(either voltage or resistence) to temperature. In order to use
voltage values as input, the circuit schematics should be provided
with the platform data. A compensation table for each type of thermistor
is provided for the conversion.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: KyungMin Park <kyungmin.park@samsung.com>
Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28 00:17:33 -07:00
David George
731b4cace1 hwmon: Driver for MAX1668
This patch adds support for MAX1668 and compatible temperature sensors.

Signed-off-by: David George <david.george@ska.ac.za>
[guenter.roeck@ericsson.com: minor cleanup of probe error path]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28 00:17:32 -07:00
Jean Delvare
156e2d1adc hwmon: (lm78) Become the maintainer
Declare myself the maintainer of the lm78 driver. I still have a
running system with one of these chips.

Also count myself as a co-author of the driver. With 34 commits over
6 years, it seems fair.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-25 21:46:11 +02:00
Jean Delvare
3d30f9e69f hwmon: (it87) Add chassis intrusion detection support
Add chassis intrusion detection support for all supported devices,
using the standard interface.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-25 21:46:10 +02:00
Hans de Goede
0772a64079 hwmon: New driver sch5636
This patch adds a new driver for SMSC SCH5636 Super I/O chips.
The chips include an embedded microcontroller for hardware monitoring
solutions, allowing motherboard manufacturers to create their own
custom hwmon solution based upon the SCH5636.

Currently the sch5636 driver only supports the Fujitsu Theseus SCH5636
based hwmon solution. The sch5636 driver runs a sanity check on
loading to ensure it is dealing with a Fujitsu Theseus and not with
another custom SCH5636 based hwmon solution.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-25 21:46:09 +02:00
Clemens Ladisch
af75d5b771 hwmon: (k10temp) Update documentation for Fam12h
Add some CPU series IDs and links to the Fam12h datasheets.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-03 13:32:54 +02:00
Hans de Goede
5da556e33f hwmon: (f71882fg) Add support for the F71869A
The F71869A is almost the same as the F71869F/E, except that it has
the normal number of temp and pwm zones for a F71882FG derived chip,
rather then the limited number of the F71869F/E.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Max Baldwin <archerseven@gmail.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-03 13:32:53 +02:00
Jean Delvare
b0b349a85d hwmon: New driver for the SMSC EMC6W201
This is a new driver for the SMSC EMC6W201 hardware monitoring device.
The device is functionally close to the EMC6D100 series, but is
register-incompatible.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Harry G McGavran Jr <w5pny@arrl.net>
Tested-by: Jeff Rickman <jrickman@myamigos.us>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25 20:43:33 +02:00
Jean Delvare
9c084dae5d hwmon: (max6650) Properly support the MAX6650
The MAX6650 has only one fan input.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: "Hans J. Koch" <hjk@hansjkoch.de>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25 20:43:32 +02:00
Jean Delvare
67b670ff04 hwmon: (max6650) Drop device detection
MAX6650 device detection is unreliable, we got reports of false
positives. We now have many ways to let users instantiate the devices
explicitly, so unreliable detection should be dropped.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: "Hans J. Koch" <hjk@hansjkoch.de>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25 20:43:32 +02:00
Hans de Goede
629c58bac0 hwmon: (f71882fg) Add support for F71808A
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25 20:43:32 +02:00
Andreas Herrmann
512d1027a6 hwmon: Add driver for AMD family 15h processor power information
This CPU family provides NB register values to gather following
TDP information

* ProcessorPwrWatts: Specifies in Watts the maximum amount of power
  the processor can support.
* CurrPwrWatts: Specifies in Watts the current amount of power being
  consumed by the processor.

This driver provides

* power1_crit (ProcessorPwrWatts)
* power1_input (CurrPwrWatts)

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25 20:43:31 +02:00
Andre Przywara
9e58131112 hwmon: (k10temp) Add support for Fam15h (Bulldozer)
AMDs upcoming CPUs use the same mechanism for the internal
temperature reporting as the Fam10h CPUs, so we just needed to add
the appropriate PCI-ID to the list.
This allows to use the k10temp driver on those CPUs.
While at it change the Kconfig entry to be more generic.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25 20:43:31 +02:00
Guenter Roeck
5e99c2f1e0 hwmon: Remove pkgtemp driver
After the merge of pkgtemp functionality into the coretemp driver,
the pkgtemp driver is no longer necessary. Remove it.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-05-21 07:22:10 -07:00
Durgadoss R
199e0de7f5 hwmon: (coretemp) Merge pkgtemp with coretemp
This patch merges the pkgtemp with coretemp driver.
The sysfs interfaces for all cores in the same pkg
are shown under one directory, in hwmon. It also
supports CONFIG_HOTPLUG_CPU. So, the sysfs interfaces
are created when each core comes online and are
removed when it goes offline.

Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
[guenter.roeck@ericsson.com: Fixed section reference errors]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-20 07:04:49 -07:00
Guenter Roeck
83f7649c52 hwmon: (pmbus) Add support for Analog Devices ADM1275
Add support for Analog Devices ADM1275 Hot-Swap Controller and Digital Power
Monitor

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:41 -07:00
Guenter Roeck
0c0a061516 hwmon: (pmbus) Support for TI UCD90xxx series Sequencer and System Health Controllers
Hardware monitoring support for TI UCD90120, UCD90124, UCD9090, and UCD90910
Sequencer and System Health Controllers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:40 -07:00
Guenter Roeck
84fc4585c1 hwmon: (pmbus) Add support for TI UCD9200 series of PWM System Controllers
This patch adds hardware monitoring support for TI UCD9220, UCD9222, UCD9224,
UCD9240, UCD9244, UCD9246, and UCD9248 Digital PWM System Controllers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:39 -07:00
Guenter Roeck
f5bae2642e hwmon: Driver for MAX16065 System Manager and compatibles
This patch adds hardware monitoring support for Maxim MAX16065, MAX16066,
MAX16067, MAX16068, MAX16070, and MAX16071 flash-configurable system managers
with nonvolatile fault registers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
2011-05-19 08:19:36 -07:00
Jerome Oufella
82c7465b4d hwmon: (sht15) add support for CRC validation
The sht15 sensor allows validating exchanges to and from the device
using a crc8 function. An utility function to reverse a byte has also
been added.

Signed-off-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19 08:19:36 -07:00
Vivien Didelot
cc15c7ebb4 hwmon: (sht15) add support for the status register
* Add support for:
  - Heater.
  - End of battery notice.
  - Ability not to reload from OTP.
  - Low resolution (12bit temp, 8bit humidity).
* Add an utility function to read individual bytes from the device.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19 08:19:35 -07:00
Vivien Didelot
99a0378de9 hwmon: (sht15) general code clean-up
* Add a documentation file for the device.
* Respect a bit more the kernel-doc syntax.
* Rename some variables for clarity.
* Use bool type for flags.
* Use an enum for states (actions being done).

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19 08:19:33 -07:00
Per Dalén
83bffbce74 hwmon: Add support for MAX6642
MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor with
Overtemperature Alarm from Maxim.

Signed-off-by: Per Dalen <per.dalen@appeartv.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19 08:19:32 -07:00
Jean Delvare
d7ce0335b5 hwmon: (adm1021) Clarify documentation regarding Xeon processors
Recent Xeon processor thermal sensors are supported by the coretemp
driver and not the adm1021 driver. Only one old generation of Xeon
processors (the first Netburst ones) are supported by the adm1021
driver.

Reported-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-04-29 16:33:36 +02:00
Guenter Roeck
177e75925b hwmon: (lm90) Fix update interval information in driver documentation
The lm90 driver's attribute update interval is configurable.
Reflect this information in the driver documentation.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-04-29 16:33:35 +02:00
Guenter Roeck
5a4e5e6a70 hwmon: (lm90) Add support for ADT7461A and NCT1008
This patch adds support for ADT7461A and NCT1008 to the lm90 driver.
Both chips have identical functionality and report the same manufacturing ID
and device ID values.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-04-29 16:33:35 +02:00
Guenter Roeck
e428d8d3bd hwmon: (max34440) Add driver documentation
MAX34440 and MAX34441 have their own driver, thus there should be explicit
documentation instead of mentioning the chips in the generic PMBus driver
documentation.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-04-19 08:50:00 -07:00
Guenter Roeck
4af33f1726 hwmon: (max16064) Add driver documentation
MAX16064 has its own driver, thus should have its own documentation instead of
being mentioned in the generic PMBus driver documentation.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-04-19 08:49:59 -07:00
Guenter Roeck
2669d9f542 hwmon: (max8688) Add driver documentation
MAX8688 has its own driver, thus should have its own documentation instead of
being mentioned in the generic PMBus driver documentation.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-04-19 08:49:58 -07:00
Guenter Roeck
180b3d889c hwmon: (pmbus) Documentation updates
Fix spelling, correct label name error, and add missing attribute to PMBus
driver documentation.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-04-19 08:49:57 -07:00
Guenter Roeck
c1a76b4741 hwmon: (smm665) Fix spelling error in driver documentation
tempererature may sound interesting, but temperature is still preferred.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-04-19 08:49:57 -07:00
Guenter Roeck
c3a2f0ad49 hwmon: Add submitting-patches checklist to documentation
When writing hardware monitoring drivers, there are some common pitfalls which
keep coming up in code reviews. This patch provides a document describing all
those pitfalls and how to avoid them.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-04-19 08:49:55 -07:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Hans de Goede
a66c10887a hwmon: (f71882fg) Add support for the F71889A
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-03-26 10:45:02 +01:00
Jean Delvare
383586b12d hwmon: (f71882fg) Add support for the F81865F
Add support for the Fintek F81865F. It's essentially compatible with
the F71882FG, but has fewer inputs: 7 voltage, 2 temperature and 2 fan
inputs only.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-26 10:45:02 +01:00
Jean Delvare
5d7f77bf66 hwmon: (f71882fg) Document all supported devices
The list of supported devices was not always well documented in all
places. Clarify and list all devices in documentation, Kconfig and
the driver itself.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-26 10:45:02 +01:00
Keerthy
0070bddfe7 hwmon: twl4030: Hwmon Driver for TWL4030 MADC
This driver exposes the sysfs nodes of the TWL4030 MADC module.
All the voltage channel values are expressed in terms of mV. Channel 13
and channel 14 are reserved. There are channels which represent
temperature and current the output is represented by celcius
and mA respectively.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:42:00 +01:00
Dirk Eibach
c0046867f3 hwmon: (ads1015) Make gain and datarate configurable
Configuration for ads1015 gain and datarate is possible via
devicetree or platform data.

This is a followup patch to previous ads1015 patches on Jean Delvares
tree.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-03-21 17:59:37 +01:00
Dirk Eibach
8c22a8f575 hwmon: Add support for Texas Instruments ADS1015
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-03-21 17:59:36 +01:00
Hans de Goede
a98d506c08 hwmon: New driver for SMSC SCH5627
SMSC SCH5627 Super I/O chips include complete hardware monitoring
capabilities. They can monitor up to 5 voltages, 4 fans and 8
temperatures.

The hardware monitoring part of the SMSC SCH5627 is accessed by talking
through an embedded microcontroller. An application note describing the
protocol for communicating with the microcontroller is available upon
request. Please mail me if you want a copy.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-03-21 17:59:36 +01:00
Len Sorensen
05e82fe40f hwmon: (lm75) Add detection of the National Semiconductor LM75A
Add support for detection of the National Semiconductor LM75A using the ID
register value.

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-03-21 17:59:36 +01:00
Jean Delvare
ff606677f6 Move lis3lv02d drivers to drivers/misc
The lis3lv02d drivers aren't hardware monitoring drivers, so the don't
belong to drivers/hwmon. Move them to drivers/misc, short of a better
home.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
2011-03-21 17:59:36 +01:00
Jean Delvare
efcfed9bad Move hp_accel to drivers/platform/x86
The hp_accel driver isn't a hardware monitoring driver, so it doesn't
belong to drivers/hwmon. Move it to drivers/platform/x86, assuming HP
doesn't ship non-x86 laptops.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
2011-03-21 17:59:36 +01:00
Jean Delvare
bfcd415dcb hwmon: (w83795) Document pin mapping
Apparently users are interested in this information, so let's provide
it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-21 17:59:35 +01:00
Hans de Goede
c11bb99362 hwmon/f71882fg: Add support for f71869f and f71869e
Note that these 2 are register compatible and report the same superio id,
but they are 2 distinct chips / models!

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Thomas Faber <thfabba@gmx.de>
Tested-by: Alexey Sychev <owl@umail.ru>
Tested-by: Dieter Bloms <dieter@bloms.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:26 -07:00
Hans de Goede
3cad402281 hwmon/f71882fg: Add support for f71889ed
Note that this patch also makes 2 changes to the code paths for the f71889fg
to keep the code unified between the 2 (for simplicities sake). Both of these
are harmless for then f71889fg:

1) The first change is to always set the FAN_PROG_SEL bit to 0. This influences
   accesses to some banked fan / pwm registers. On the f71889fg no registers
   which we use are banked. On the f71889ed however some more fan registers
   have been banked including one which we use, by making the FAN_PROG_SEL bit
   0, address 0x96 will point to the right register.
2) The second change is to see a FANx_TEMP_SEL value of 0 as pointing to
   a PECI / AMDSI value, and thus disable our pwm related sysfs attr.
   This is correct for the f71889ed and on the f71889fg 0 is a reserved
   value, so we should never see it and if we do, disabling the pwm related
   sysfs attr is a sane thing to do.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Thomas Greve <tg42@gmx.net>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:25 -07:00
Guenter Roeck
ec3e5a1644 hwmon: (w83627ehf) Add support for Nuvoton NCT6775F and NCT6776F
This patch adds support for NCT6775F and NCT6776F to the w83627ehf driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Tested-by: Ian Dobson <i.dobson@planet-ian.com> (NCT6776F)
Tested-by: Zachary Marzec <zmarzec@gmail.com> (ASUS P8P67 PRO/NCT6776F)
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:17 -07:00
Guenter Roeck
96d1eac97b hwmon: (w83627ehf) Remove references to datasheets which no longer exist
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:15 -07:00
Guenter Roeck
d36cf32c9a hwmon: (w83627ehf) Improve support for W83667HG-B
Add support for 4th temperature sensor on W83677HG-B.
Display temperature labels on W83677HG-B to report temperature sources.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:14 -07:00
Guenter Roeck
2d2e148a23 hwmon: Add tachometer pulses per fan revolution to sysfs ABI
Some fan control chips support a configuration register to set the number of
tachometer pulses per fan revolution. Add an ABI attribute to support this
configuration register.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-14 22:39:12 -07:00
per.dalen@appeartv.com
de7790155f hwmon: Add support for LTC4151
LTC4151 is High Voltage I2C Current and Voltage Monitor from Linear
Technology.

Signed-off-by: Per Dalen <per.dalen@appeartv.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:11 -07:00
Guenter Roeck
44f5a408ba hwmon: PMBus driver documentation
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2011-03-14 22:38:58 -07:00
Guenter Roeck
06923f8442 hwmon: (lm85) Add support for EMC6D103S
EMC6D103S is similar to EMC6D103, only it does not support registers 62[5:7],
6D[0:7], and 6E[0:7]. Register respective sysfs attributes and update affected
registers for all other chips only.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-14 22:36:25 -07:00
Guenter Roeck
502b5a0199 hwmon: Add support for Lineage Compact Power Line PEM devices
This patch adds support for hardware monitoring of Lineage Compact Power Line
Power Entry Modules.

Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:36:25 -07:00
stigge@antcom.de
a5b79d62f2 hwmon: Driver for Maxim MAX6639
2-Channel Temperature Monitor with Dual PWM Fan-Speed Controller

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:36:24 -07:00
Clemens Ladisch
aa4790a628 hwmon: (k10temp) add support for AMD Family 12h/14h CPUs
Add the PCI ID to support the internal temperature sensor of the
AMD "Llano" and "Brazos" processor families.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@kernel.org # ca86828: x86, AMD, PCI: Add AMD northbridge PCI device
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-18 06:14:24 -08:00
Clemens Ladisch
2c6315da6a hwmon: (jc42) do not allow writing to locked registers
On systems where the temperature sensor is actually used, the BIOS is
likely to have locked the alarm registers.  In that case, all writes
through the corresponding sysfs files would be silently ignored.

To prevent this, detect the locks and make the affected sysfs files
read-only.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-16 08:18:33 -08:00
Clemens Ladisch
d5622f5b6c hwmon: (jc42) more helpful documentation
The documentation lists standard numbers and chip names in excruciating
detail, but that's all it does.  To help mere mortals in deciding
whether to enable this driver, mention what this sensor is for and in
which systems it might be found.

Also add a link to the actual JC 42.4 specification.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-16 08:18:32 -08:00
Guenter Roeck
c7bf71c517 hwmon: (lm93) Add support for LM94
This patch adds basic support for LM94 to the LM93 driver. LM94 specific
sensors and features are not supported.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-01-18 12:22:54 -08:00
Juerg Haefliger
d4b94e1fa6 hwmon: (dme1737) Add support for in7 for SCH5127
Add support for the 1.5V voltage monitoring input (in7) of the
SMSC SCH5127 chip.

Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:13 +01:00
Jean Delvare
3ea1bd58b9 hwmon: (w83627hf) Document W83627THF voltage pin mapping
I had to look it up for one user, so we might as well store it in the
driver documentation.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:11 +01:00
Jean Delvare
a516dc3e9b hwmon: (w83793) Implement the standard intrusion detection interface
We have a standard intrusion detection interface now, drivers should
implement it. I've left the old interface in place for the time being,
with a deprecation warning, it will be removed later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:10 +01:00
Jean Delvare
0de2b24480 hwmon: (adm9240) Implement the standard intrusion detection interface
We have a standard intrusion detection interface now, drivers should
implement it. I've left the old interface in place for the time being,
with a deprecation warning, it will be removed later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:09 +01:00
Steven Hardy
5d84291da3 hwmon: (ads7828) Update email contact details
Trivial patch updating my email contact details due to change of
employer, and because I no longer have access to the previously used
domain.

Unfortunately I also no longer have access to any ads7828 hardware, but
am happy to support/maintain the driver if others are able to test
changes.

Signed-off-by: Steve Hardy <shardy@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:08 +01:00
Roland Stigge
6099469805 hwmon: Support for Dallas Semiconductor DS620
Driver for Dallas Semiconductor DS620 temperature sensor and thermostat

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-09 09:10:10 -08:00
Urs Fleisch
430400b863 hwmon: driver for Sensirion SHT21 humidity and temperature sensor
Signed-off-by: Urs Fleisch <urs.fleisch@sensirion.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:56:28 -08:00
Guenter Roeck
c6c2c1636e hwmon: Add humidity attribute to sysfs ABI
The humidity attribute is already supported by the sht15 driver, and another
driver supporting it is about to be added. Make it official.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-01-08 10:56:27 -08:00
Guenter Roeck
581693b51e hwmon: sysfs ABI updates
Add attributes supported by various PMBus devices to hwmon sysfs ABI.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:49 -08:00
Hans J. Koch
f99e0e98f9 Documentation: change email address for Hans Koch
My old mail address doesn't exist anymore. This changes all occurrences
to my new address.

Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-18 15:00:46 -08:00
Jean Delvare
44c1bcd4bc hwmon: (it87) Add support for the IT8721F/IT8758E
Add support for the IT8721F/IT8758E. These new chips differ from the
older IT87xxF chips in the following ways:
* ADC LSB is 12 mV instead of 16 mV.
* PWM values are 8-bit instead of 7-bit.
There are other minor changes we don't have to care about in the
driver.

Another change is that we will handle internal voltage scaling in the
driver instead of delegating the work to user-space.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:51 +02:00
Jean Delvare
f6c61cff8b hwmon: (lm85) Add support for ADT7468 high-frequency PWM mode
The ADT7468 supports a high-frequency PWM output mode where all PWM
outputs are driven by a 22.5 kHz clock. Add support for this mode, and
document it, as it may surprise the user that setting one PWM output
frequency also affects the other PWM outputs.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:50 +02:00
Jean Delvare
c36364dbf3 hwmon: (lm85) Document the ADT7468 as supported
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:50 +02:00
Jean Delvare
6dfee85397 hwmon: (pcf8591) Don't attempt to detect devices
The PCF8591 can't be detected, don't even try. There are plenty of
other means to instantiate i2c devices these days.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
2010-10-28 20:31:50 +02:00
Jean Delvare
c4f99a2b8f hwmon: (lm90) Add support for the W83L771W/G
I was wondering if that chip ever existed publicly... Apparently yes,
so add support for it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:44 +02:00
Guenter Roeck
06e1c0a216 hwmon: (lm90) Add support for max6695 and max6696
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
6948708dd0 hwmon: (lm90) Add support for extra features of max6659
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
13c84951a3 hwmon: (lm90) Add explicit support for max6659
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
28e7438faa hwmon: Add tempX_emergency attribute to sysfs ABI
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:42 +02:00
Guenter Roeck
e5f5c99a39 hwmon: LTC4261 Hardware monitoring driver
This driver adds support for Linear Technology LTC4261 I2C Negative
Voltage Hot Swap Controller.

Reviewed-by: Ira W. Snyder <iws@ovro.caltech.edu>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25 14:11:20 -07:00
Guenter Roeck
a51b9944a1 hwmon: (adm1031) Replace update_rate sysfs attribute with update_interval
The attribute reflects an interval, not a rate.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-17 17:24:14 +02:00
Andrew Morton
f2e41e9103 revert "hwmon: f71882fg: add support for the Fintek F71808E"
Revert commit 7721fea3d0 ("hwmon:
f71882fg: add support for the Fintek F71808E").

Hans said:

: A second review after I've received a data sheet for this device from
: Fintek has turned up a few bugs.
:
: Unfortunately Giel (nor I) have time to fix this in time for the 2.6.36
: cycle.  Therefor I would like to see this patch reverted as not having any
: support for the hwmon function of this superio chip is better then having
: unreliable support.

Cc: Giel van Schijndel <me@mortis.eu>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-20 09:34:55 -07:00
Jean Delvare
008e5f3350 hwmon: (pc87427) Add temperature monitoring support
Add support for the 6 temperature monitoring channels of the PC87427.
Note that the sensors resolution can vary, and I couldn't find a way
to figure it out, so we might have to compensate in user-space.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-08-14 21:08:59 +02:00
Jean Delvare
328716bc16 hwmon: (pc87427) Add support for manual fan speed control
Add initial support for PWM outputs of the PC87427 Super-I/O chip.
Only mode change and manual fan speed control are supported. Automatic
mode configuration isn't supported, and won't be until at least one
board is known, which makes uses of the PWM outputs.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-08-14 21:08:58 +02:00
Guenter Roeck
c39aedafb2 hwmon: (w83627ehf) Add support for W83667HG-B
Add support for W83667HG-B (very similar to the W83667HG).

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14 21:08:55 +02:00
Steve Glendinning
9df7305b5a hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller
SMSC's EMC2103 family of temperature/fan controllers have 1
onboard and up to 3 external temperature sensors, and allow
closed-loop control of one fan.  This patch adds support for
them.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14 21:08:54 +02:00
Jean Delvare
5a9c2cd881 hwmon: Remove in[0-*]_fault from sysfs-interface
Fault files are for hardware failures that can be reported. So far
we've seen chips reporting such failures for temperature sensors and
fans, but not for voltages. Remove in[0-*]_fault for now. It can be
added back later if really needed, but I doubt it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-08-14 21:08:54 +02:00
Guenter Roeck
e04a715e4e hwmon: Add 4 current alarm/beep attributes to sysfs-interface
Add currX_alarm, currX_min_alarm, currX_max_alarm and currX_beep
attributes to the hwmon sysfs API.

currX_min_alarm and currX_max_alarm are already supported by the LTC4215
and LTC4245 drivers. currX_alarm is supported by the LTC4261 driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14 21:08:53 +02:00
Guenter Roeck
f46fc8cd38 hwmon: Add 3 critical limit attributes to sysfs-interface
Added _lcrit and _crit to voltage attributes. 
Added _lcrit to temperature attributes.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14 21:08:52 +02:00
Ira W. Snyder
5950ec8d3e hwmon: (ltc4245) Expose all GPIO pins as analog voltages
Add support for exposing all GPIO pins as analog voltages. Though this is
not an ideal use of the chip, some hardware engineers may decide that the
LTC4245 meets their design requirements when studying the datasheet.

The GPIO pins are sampled in round-robin fashion, meaning that a slow
reader will see stale data. A userspace application can detect this,
because it will get -EAGAIN when reading from a sysfs file which contains
stale data.

Users can choose to use this feature on a per-chip basis by using either
platform data or the OF device tree (where applicable).

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14 21:08:49 +02:00
Giel van Schijndel
7721fea3d0 hwmon: f71882fg: add support for the Fintek F71808E
Allow device probing to recognise the Fintek F71808E.

Sysfs interface:
 * Fan/pwm control is the same as for F71889FG
 * Temperature and voltage sensor handling is largely the same as for
   the F71889FG
  - Has one temperature sensor less (doesn't have temp3)
  - Misses one voltage sensor (doesn't have V6, thus in6_input refers to
    what in7_input refers for F71889FG)

For the purpose of the sysfs interface fxxxx_in_temp_attr[] is split up
such that it can largely be reused.

Signed-off-by: Giel van Schijndel <me@mortis.eu>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:10 -07:00
Chen Gong
f3cffe4d1a hwmon: coretemp: documentation update and cleanup
Update coretemp supported CPU TjMax lists and some cleanup work.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:10 -07:00
Guenter Roeck
4453d7364d hwmon: add support for JEDEC JC 42.4 compliant temperature sensors
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:10 -07:00
Guenter Roeck
920fa1ffce hwmon: driver for SMM665 Six-Channel Active DC Output Controller/Monitor
This driver adds support for the monitoring features of the Summit
Microelectronics SMM665 Six-Channel Active DC Output Controller/Monitor.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:10 -07:00
Linus Torvalds
a5e11599da Merge branch 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hwmon: Package Level Thermal/Power: pkgtemp documentation
  x86, hwmon: Package Level Thermal/Power: power limit
  x86, hwmon: Package Level Thermal/Power: thermal throttling handler
  x86, hwmon: Package Level Thermal/Power: pkgtemp hwmon driver
2010-08-06 10:02:58 -07:00
Justin P. Mattock
0ea6e61122 Documentation: update broken web addresses.
Below you will find an updated version from the original series bunching all patches into one big patch
updating broken web addresses that are located in Documentation/*
Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult,
the best way to deal with these is to use web.archive.org to locate these addresses that are outdated.
Now there are also some addresses pointing to .spec files some are located, but some(after searching
on the companies site)where still no where to be found. In this case I just changed the address
to the company site this way the users can contact the company and they can locate them for the users.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Cc: Paulo Marques <pmarques@grupopie.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Michael Neuling <mikey@neuling.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-04 15:21:40 +02:00
Fenghua Yu
a3159864f2 x86, hwmon: Package Level Thermal/Power: pkgtemp documentation
Document for package level thermal hwmon driver.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
LKML-Reference: <1280448826-12004-6-git-send-email-fenghua.yu@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-03 15:58:56 -07:00
Pavel Machek
a2531293db update email address
pavel@suse.cz no longer works, replace it with working address.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-19 10:56:54 +02:00
Ira W. Snyder
df16dd53c5 hwmon: (ltc4245) Read only one GPIO pin
Read only one of the GPIO pins as an analog voltage. The ADC can be
switched to a different GPIO pin at runtime, but this is not supported.

Previously, this driver would report the analog voltage of the currently
selected GPIO pin as all three GPIO voltages: in9_input, in10_input and
in11_input.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
2010-05-27 19:59:02 +02:00
Juerg Haefliger
ea694431f9 hwmon: (dme1737) Add SCH5127 support
Add support for the hardware monitoring capabilities of the SCH5127
chip to the dme1737 driver.

Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Jeff Rickman <jrickman@myamigos.us>
2010-05-27 19:59:01 +02:00
Jean Delvare
cff37c9e82 hwmon: (tmp102) Various fixes
Fixes from my driver review:
http://lists.lm-sensors.org/pipermail/lm-sensors/2010-March/028051.html

Only the small changes are in there, more important changes will come
later separately as time permits.

* Drop the remnants of the now gone detect function
* The TMP102 has no known compatible chip
* Include the right header files
* Clarify why byte swapping of register values is needed
* Strip resolution info bit from temperature register value
* Set cache lifetime to 1/3 second
* Don't arbitrarily reject limit values; clamp as needed
* Make limit writing unconditional
* Don't check for transaction types the driver doesn't use
* Properly check for error when setting configuration
* Report error on failed probe
* Make the driver load automatically where needed
* Various other minor fixes

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Steven King <sfking@fdwdc.com>
2010-05-27 19:58:57 +02:00
Steven King
beb1b6bbf2 hwmon: Driver for TI TMP102 temperature sensor
Driver for the TI TMP102.

The TI TMP102 is similar to the LM75.  It differs from the LM75 by
having a 16-bit conf register and the temp registers have a minimum
resolution of 12 bits; the extended conf register can select 13-bit
resolution (which this driver does) and also change the update rate
(which this driver currently doesn't use).

[JD: Fix tmp102_exit tag, must be __exit, not __init.]

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-27 19:58:56 +02:00
Ira W. Snyder
d2b847d489 hwmon: Add description of the update_rate sysfs attribute
The update_rate attribute can be used by drivers to let userspace choose
the update rate of the chip, if it is configurable.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-27 19:58:45 +02:00
Matthew Garrett
10f2ed31aa hwmon: (lm63) Add basic support for LM64
The LM64 appears to be an LM63 with added GPIO lines. Add support for the
hwmon functionality - GPIO can be added at some later stage if someone
has a need for them.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-27 19:58:38 +02:00
Francis Galiegue
a33f32244d Documentation/: it's -> its where appropriate
Fix obvious cases of "it's" being used when "its" was meant.

Signed-off-by: Francis Galiegue <fgaliegue@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-23 02:09:52 +02:00
Jiri Kosina
318ae2edc3 Merge branch 'for-next' into for-linus
Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c
2010-03-08 16:55:37 +01:00
Amerigo Wang
a0a5e3488a hwmon: Remove the deprecated adt7473 driver
adt7473 driver is obsoleted by adt7475 driver. And it is scheduled
to be removed in Feb 2010.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:26 +01:00
George Joseph
d58de03872 hwmon: Driver for Andigilog aSC7621 family monitoring chips
Hwmon driver for Andigilog aSC7621 family monitoring chips.

Signed-off-by: George Joseph <george.joseph@fairview5.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:25 +01:00
Wolfram Sang
d84ca5b345 hwmon: Add driver for ADT7411 voltage and temperature sensor
Add basic support for the ADT7411. Reads out all conversion results (via I2C,
SPI yet missing) and allows some on-the-fly configuration. Tested with a
custom board.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:23 +01:00
Jean Delvare
cccfc9c4bb hwmon: (it87) Validate auto pwm settings
Before switching to automatic fan control mode, make sure that all the
trip points make sense. Otherwise, the control loop could lead to
weird fan behavior.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:21 +01:00
Jean Delvare
4f3f51bc21 hwmon: (it87) Add support for old automatic fan speed control
Add support for the automatic fan speed control interface as
implemented by IT8705F chips up to revision F and IT8712F chips up to
revision G. This implementation fits very well in our standard sysfs
interface.

I implemented the old and not the new interface because the only chip
I have at hand is an old one, and the new interface is more difficult
to map to the standard sysfs interface. Adding support later should be
possible though, if someone with a supported chip is interested.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:21 +01:00
Jean Delvare
404a552d8a hwmon: (it87) Drop dead web links in documentation
Unfortunately ITE is no longer publicly providing datasheets for their
IT87xxF series of chips. They may send them on request if you ask
politely.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:21 +01:00
Jean Delvare
d9b327c310 hwmon: (it87) Add support for beep on alarm
The IT87xxF chips support beeping on alarm, if properly wired and
configured. There is one control bit for each input type (temperature,
fan, voltage.) Let the user see and change them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:17 +01:00
Jean Delvare
53de33427f hwmon: (lm90) Add SMBus alert support
Tested successfully with an ADM1032 chip on its evaluation board. It
should work fine with all other chips as well.

At this point this is more of a proof-of-concept, we don't do anything
terribly useful on SMBus alert: we simply log the event. But this could
later evolve into libsensors signaling so that user-space applications
can take an appropriate action.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Trent Piepho <tpiepho@freescale.com>
2010-03-05 22:17:15 +01:00
Jean Delvare
6771ea1fff hwmon: (lm90) Add support for the Winbond/Nuvoton W83L771AWG/ASG
This chips is found on several Zotac Ion ITX boards, amongst others.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: MC Matti <mcmatti17@googlemail.com>
Cc: Manuel Lamotte-Schubert <mls@pronego.com>
2010-03-05 22:17:13 +01:00
Daniel Mack
3ad2f3fbb9 tree-wide: Assorted spelling fixes
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-09 11:13:56 +01:00
Linus Torvalds
6102c315d8 Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: Make PCI device ids constant
  hwmon: (coretemp) Fix TjMax for Atom N450/D410/D510 CPUs
  hwmon: (k10temp) Blacklist more family 10h processors
  hwmon: (asus_atk0110) Add debugfs interface
  hwmon: (asus_atk0110) Refactor interface probe code
  hwmon: (adt7462) Fix pin 28 monitoring
2010-01-11 09:45:55 -08:00
Tomaz Mertelj
b5430a04e9 hwmon: driver for Texas Instruments amc6821 chip
Signed-off-by: <tomaz.mertelj@guest.arnes.si>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:06 -08:00
Clemens Ladisch
c5114a1cd6 hwmon: (k10temp) Blacklist more family 10h processors
The latest version of the Revision Guide for AMD Family 10h Processors
lists two more processor revisions which may be affected by erratum 319.
Change the blacklisting code to correctly detect those processors, by
implementing AMD's recommended algorithm.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Andreas Herrmann <herrmann.der.user@googlemail.com>
2010-01-10 20:52:34 +01:00
Clemens Ladisch
3c57e89b46 hwmon: New driver for AMD Family 10h/11h CPUs
This adds a driver for the internal temperature sensor of AMD Family 10h
and 11h CPUs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-12-16 21:38:25 +01:00
Samu Onkalo
e956e6b770 lis3: update documentation to match latest changes
[akpm@linux-foundation.org: s/q/g/ (Randy)]
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Éric Piel <Eric.Piel@tremplin-utc.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:36 -08:00
Éric Piel
bc62c14717 lis3: update documentation and comments
Most of the documentation and comments were written when the driver was
only supporting one type of chip, only via ACPI/HP. Update the info to
the much clearer understanding that we have now.

Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:36 -08:00
Daniel J Blueman
41e9a06236 hwmon: w83627ehf updates
Add control of fan minimum turn-on output levels, decoupling it from the
fan turn-off output level.  Add control of rate of change of fan output
level.  These in turn allow lower turn-off rotor speed and smoother
transitions for better thermal and acoustic control authority.  Add
support for constant fan speed and proportional-response operations modes.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: David Hubbard <david.c.hubbard@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:35 -08:00
Jean Delvare
54fe4671aa hwmon: (adt7475) Add VID support for the ADT7476
The ADT7476 has 5 dedicated pins for VID input, and the +12V input can
optionally be used as a 6th VID pin. Add support for VID input.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
2009-12-09 20:36:08 +01:00
Jean Delvare
d8d2ee0732 hwmon: (adt7475) Add support for the ADT7476
Add support for the Analog Devices ADT7476 chip. This chip is largely
compatible with the ADT7473 and ADT7475, with additional features.
In particular, it has 5 voltage inputs instead of 2, and VID input
pins.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
2009-12-09 20:36:08 +01:00
Jean Delvare
3d84998171 hwmon: (adt7475) Add support for the ADT7490
Add support for the Analog Devices ADT7490 chip. This chip is largely
compatible with the ADT7473 and ADT7475, with additional features.
In particular, it has 6 voltage inputs instead of 2.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
2009-12-09 20:36:05 +01:00
Jean Delvare
f890c6a3b6 hwmon: (adt7475) New documentation
New documentation for the adt7475 driver, based on the adt7473 driver
documentation. It is IMHO much more useful that the previous
documentation which was essentially redundant with sysfs-interface.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
2009-12-09 20:36:02 +01:00
Jean Delvare
b180d05084 hwmon: (adt7475) Add support for the ADT7473
Add support for the ADT7473 to the adt7475 driver, and mark the
adt7473 driver for removal. The ADT7473 and ADT7475 chips are almost
the same chip and essentially compatible, so there's no point in
having separate drivers for them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
2009-12-09 20:36:02 +01:00
Hans de Goede
7669896f49 hwmon: (f71882fg) Add support for the f71889fg (version 2)
This adds support for the Fintek f71889fg to the f71882fg driver,
many thanks to Gerd v. Egidy for providing (remote) access to a
machine which such an ic.

Note that this bit of the patch:
-	val = SENSORS_LIMIT(val, 0, 255);
+
+	if (data->type == f71889fg)
+		val = SENSORS_LIMIT(val, -128, 127);
+	else
+		val = SENSORS_LIMIT(val, 0, 127);

Changes behaviour for already supported models, the new behaviour is correct
as the already supported models have bit 7 of the involved registers fixed at
0, so the previous behaviour which allowed setting temp zone limits > 127
was not correct.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-12-09 20:36:01 +01:00
Luotao Fu
93ee0a75f6 hwmon: Add Freescale MC13783 ADC driver
This driver provides support for the ADC integrated into the
Freescale MC13783 PMIC.

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-12-09 20:35:58 +01:00
Jean Delvare
8918023d40 hwmon: (w83627hf) Drop the force_addr module parameter
This module parameter is there to workaround broken BIOS. I'm not even
sure if it was used in the past 5 years, and it gets in the way of
converting the driver to the MFD infrastructure. So tell the users how
they can do the same from user-space.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rodolfo Giometti <giometti@linux.it>
2009-12-09 20:35:48 +01:00
Jean Delvare
895ff26768 hwmon: (it87) Verify the VID pin usage
The VID input pins can alternatively be used as GPIOs. Make sure we
have at least 4 pins used for VID, otherwise don't bother reading and
exposing VID.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Adam Nielsen <a.nielsen@shikadi.net>
2009-12-09 20:35:47 +01:00
Jean Delvare
f7290e24e3 hwmon: Clarify autopwm trip points documentation
Document the case of hybrid automatic fan speed control
implementations, where trip points are associated to both PWM output
channels and temperature input channels.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-12-09 20:35:47 +01:00
Darrick J. Wong
115a57c5b3 hwmon: enhance the sysfs API for power meters
Augment the documentation of the hwmon sysfs API to accomodate ACPI power
meters and the current desired behavior of power capping hardware drivers.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29 07:39:30 -07:00
Jean Delvare
2d2a7cff1b ltc4215/ltc4245: Discard obsolete detect methods
There is no point in implementing a detect callback for the LTC4215
and LTC4245, as these devices can't be detected. It was there solely
to handle "force" module parameters to instantiate devices, but now
we have a better sysfs interface that can do the same.

So we can get rid of the ugly module parameters and the detect
callbacks. This shrinks the binary module sizes by 36% and 46%,
respectively.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Ira W. Snyder <iws@ovro.caltech.edu>
2009-10-04 22:53:42 +02:00
Linus Torvalds
3e56d49390 Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (ltc4245) Clear faults at startup
  hwmon: (ltc4215) Clear faults at startup
  hwmon: (coretemp) Add Lynnfield CPU
  hwmon: (coretemp) Add support for Penryn mobile CPUs
  hwmon: (coretemp) Fix Atom CPUs support
  hwmon: Delete deprecated FSC drivers
  hwmon: (adm1031) Add sysfs files for temperature offsets
2009-09-23 15:20:16 -07:00
Huaxu Wan
fa08acd7d1 hwmon: (coretemp) Add Lynnfield CPU
Add Lynnfield processor support. Lynnfield is a quad-core Nehalem
based microprocessor for Desktop market, which is introduced in
September 2009.

Signed-off-by: Huaxu Wan <huaxu.wan@linux.intel.com>
Signed-off-by: Kent Liu <kent.liu@linux.intel.com>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-23 22:59:43 +02:00
Rudolf Marek
eccfed4221 hwmon: (coretemp) Add support for Penryn mobile CPUs
Following patch adds support for mobile Penryn CPUs. Intel documents this
poorly. I asked the Coretemp author for some help. This is totally untested and
may not work. Please test!

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@linux.intel.com>
Cc: Kent Liu <kent.liu@linux.intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-23 22:59:42 +02:00
Rudolf Marek
708a62bcd5 hwmon: (coretemp) Fix Atom CPUs support
Fix Atom CPUs support. Intel documents TjMax at 90 degrees C but
some Atoms may have 125 degrees C (this is undocumented speculation).

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@linux.intel.com>
Cc: Kent Liu <kent.liu@linux.intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-23 22:59:42 +02:00
Jean Delvare
91f17e02a2 hwmon: Delete deprecated FSC drivers
The legacy fscpos and fscher drivers have been replaced by the unified
fschmd driver. The transition period is over now, we can delete them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2009-09-23 22:59:42 +02:00
Linus Torvalds
c11f6c8258 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (119 commits)
  ACPI: don't pass handle for fixed hardware notifications
  ACPI: remove null pointer checks in deferred execution path
  ACPI: simplify deferred execution path
  acerhdf: additional BIOS versions
  acerhdf: convert to dev_pm_ops
  acerhdf: fix fan control for AOA150 model
  thermal: add missing Kconfig dependency
  acpi: switch /proc/acpi/{debug_layer,debug_level} to seq_file
  hp-wmi: fix rfkill memory leak on unload
  ACPI: remove unnecessary #ifdef CONFIG_DMI
  ACPI: linux/acpi.h should not include linux/dmi.h
  hwmon driver for ACPI 4.0 power meters
  topstar-laptop: add new driver for hotkeys support on Topstar N01
  thinkpad_acpi: fix rfkill memory leak on unload
  thinkpad-acpi: report brightness events when required
  thinkpad-acpi: don't poll by default any of the reserved hotkeys
  thinkpad-acpi: Fix procfs hotkey reset command
  thinkpad-acpi: deprecate hotkey_bios_mask
  thinkpad-acpi: hotkey poll fixes
  thinkpad-acpi: be more strict when detecting a ThinkPad
  ...
2009-09-23 09:32:11 -07:00
Frans Pop
be3990b7ef trivial: doc: hpfall: accept disk device to unload as argument
Allows users who use an IDE driver for their disk to use hpfall without
having to modify the source. By default /dev/sda is used.
Suggested by Christian Thaeter in http://lkml.org/lkml/2009/3/25/505.

While we're add it, improve error message if opening /dev/freefall fails.

Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Christian Thaeter <ct@pipapo.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:57 +02:00
Christian Thaeter
2bace8b951 trivial: doc: hpfall: reduce risk that hpfall can do harm
Improve the example code to be at least useable, as in not causing
harm (as shown below). Code can still be improved further, but this
adds some basic safeguards.

1. hpfall *MUST* mlockall(MCL_CURRENT|MCL_FUTURE); itself!
Since the Program sits and waits most of the time it becomes very likely
swapped out. If it gets woken up when the laptop drops from the table
while it is swapped out it actually triggers harddrive activity!

2. Daemonize hpfall using 'daemon(0,0)' (quick and dirty).

3. Give hpfall realtime priority.
Should give a chance that it has less latency when woken up.

Signed-off-by: Christian Thaeter <ct@pipapo.org>
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:57 +02:00
Anand Gadiyar
fd589a8f0a trivial: fix typo "to to" in multiple files
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:55 +02:00
Frans Pop
b519c15d4a trivial: cleanup hpfall example code (checkpatch)
This patch makes hpfall.c conform to kernel coding style.

I have not fixed the C99 // comments on two lines as they
help indicate that those are not actually comments but
incomplete code.

Before:
 total: 10 errors, 6 warnings, 101 lines checked
After:
 total: 2 errors, 0 warnings, 99 lines checked

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:52 +02:00
Len Brown
44396a2622 Merge branch 'power-meter' into release 2009-09-19 02:10:22 -04:00
Darrick J. Wong
de584afa5e hwmon driver for ACPI 4.0 power meters
This driver exposes ACPI 4.0 compliant power meters as hardware monitoring
devices.  This second revision of the driver also exports the ACPI string
info as sysfs attributes, a list of the devices that the meter measures,
and will send ACPI notifications over the ACPI netlink socket.  This
latest revision only enables the power capping controls if it can be
confirmed that the power cap can be enforced by the hardware and explains
how the notification interfaces work.

[akpm@linux-foundation.org: remove default-y]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-19 01:30:01 -04:00
Linus Torvalds
6f130478e2 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (55 commits)
  regulator: Voltage count for AB3100
  mfd: Convert WM8350 to use request_threaded_irq()
  mfd: Update MAINTAINERS patterns for WM831x
  mfd: Fix twl4030-power warnings
  regulator: AB3100 support
  rtc: AB3100 RTC support
  mfd: Fix ab3100-otp build failure
  mfd: OMAP: Board-specifc twl4030 DPS scripts for RX51 board
  mfd: Print warning for twl4030 out-of-order script loading
  mfd: Add support for TWL4030/5030 dynamic power switching
  mfd: AB3100 OTP readout
  regulator: Add Freescale MC13783 driver
  mfd: Add Freescale MC13783 driver
  mfd: AB3100 disable irq nosync
  mfd: AB3100 alter default setting
  mfd: AB3100 propagate error
  mfd: AB3100 accessor function cleanups
  rtc: Add support for RTCs on Wolfson WM831x devices
  regulator: get pcap data from the parent device
  input: PCAP2 misc input driver
  ...
2009-09-18 09:22:36 -07:00
Mark Brown
08bad5a821 hwmon: WM831x PMIC hardware monitoring driver
This driver adds support for the hardware monitoring features of
the WM831x PMICs to the hwmon API. Monitoring is provided for
the system voltages supported natively by the WM831x, the chip
temperature, the battery temperature and the auxiliary inputs
of the WM831x.

Currently no alarms are supported, though digital comparators on
the WM831x devices would allow these to be provided.

Since the auxiliary and battery temperature input scaling depends
on the system configuration the value is reported as a voltage to
userspace.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:47:02 +02:00
Mark Brown
fb6c023a2b hwmon: Add WM835x PMIC hardware monitoring driver
This driver provides reporting of the status supply voltage rails
of the WM835x series of PMICs via the hwmon API.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:46:51 +02:00
Jean Delvare
afc31875fa hwmon: (pcf8591) Documentation clean-ups
Clean up the pcf8591 driver documentation:
* The PCF8591 chip is now an NXP product.
* Fix a sysfs path.
* Fix the name of sysfs attributes.
* And a few other random fixes.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
2009-09-15 17:18:14 +02:00
Andre Prendel
1915fb70fa hwmon: (tmp421) Add documentation
Add documentation for the tmp421 driver.

Signed-off-by: Andre Prendel <andre.prendel@gmx.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-15 17:18:12 +02:00
Hans de Goede
09475d32e6 hwmon: (f71882fg) Add support for the F71858F
Add support for the hwmon part of the Fintek F71858FG superio IC to the
f71882fg driver. Many thanks to Jelle de Jong for lending me a motherboard 
with this superio on it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-15 18:39:52 +02:00
Jean Delvare
c1e48dce05 hwmon: (w83627ehf) Add W83627DHG-P support
Add support for the new incarnation of the Winbond/Nuvoton W83627DHG
chip known as W83627DHG-P. It is basically the same as the original
W83627DHG with an additional automatic can speed control mode (not
supported by the driver yet.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Madhu <madhu.chinakonda@gmail.com>
2009-06-15 18:39:50 +02:00
Andre Prendel
cd4e96c5dd hwmon: (tmp401) Add documentation
Documentation for the tmp401 driver.

The documentation describes the tmp401 driver and the supported Texas
Instruments TMP401 and TMP411 temperature sensor chips.

Further documentation for new sysfs attributes supported by this
driver is added to Documentation/hwmon/sysfs-interface.

Signed-off-by: Andre Prendel <andre.prendel@gmx.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-15 18:39:49 +02:00
Darrick J. Wong
8070408b54 hwmon: (ibmaem) Automatically load on HC10 blade
Enable auto-probing for the HC10 blade and amend the supported system
list.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-15 18:39:46 +02:00
Christian Engelmayer
d54d462472 hwmon: Update documentation on fan_max
Add fan_max description.

Add fan limit alarm 'max_alarm' to the alarm section.

Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-01 13:46:50 +02:00
Herbert Valerio Riedel
3bcfa9e47a hwmon: add support for GMT G760A fan speed PWM controller
This controller can be found on the D-Link DNS-323 for instance, where
it is to be configured via static i2c_board_info in the board-specific
mach-orion/dns323-setup.c; this driver supports only the new-style
driver model.

Tested-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org>
Signed-off-by: Matthew Palmer <mpalmer@debian.org>
Signed-off-by: Laurie Bradshaw <bradshaw.laurie@googlemail.com>
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:03 -07:00
Ira Snyder
72f5de92e1 hwmon: Add LTC4215 driver
Add Linux support for the Linear Technology LTC4215 Hot Swap controller
I2C monitoring interface.

I have tested the driver with my board, and it appears to work fine.  With
the power supplies disabled, it reads 11.93V input, 1.93V output, no
current and no power.  With the supplies enabled, it reads 11.93V input,
11.98V output, no current, no power.  I'm not drawing any current at the
moment, so this is reasonable.  The value in the sense register never
reads anything except 0, so I expect to get zero from the current and
power calculations.

I didn't attempt to support changing any of the chip's settings or
enabling the FET.  I'm not sure even how to do that and still fit within
the hwmon framework.  :)

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:21 -07:00
Pavel Machek
2b872903c5 hp_accel: small documentation updates
Fix english in Documentation, add "how to test" description.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Vladimir Botka <vbotka@suse.cz>
Cc: <Quoc.Pham@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:21 -07:00
Jean Delvare
ec19920944 hwmon: Define a standard interface for chassis intrusion detection
Define a standard interface for the chassis intrusion detection feature
some hardware monitoring chips have. Some drivers have custom sysfs
entries for it, but a standard interface would allow integration with
user-space (namely libsensors.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Acked-by: Matt Roberds <mattroberds@cox.net>
2009-03-30 21:46:44 +02:00
Jean Delvare
fb4504fe84 Move the pcf8591 driver to hwmon
Directory drivers/i2c/chips is going away, so drivers there must find
new homes. For the pcf8591 driver, the best choice seems to be the
hwmon subsystem. While the Philips PCF8591 device isn't a typical
hardware monitoring chip, its DAC interface is compatible with the
hwmon one, so it fits somewhat.

If a better subsystem is ever created for ADC/DAC chips, the driver
could be moved there.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
2009-03-30 21:46:43 +02:00
Gong Jun
237c8d2f54 hwmon: (w83627ehf) Add support for W83667HG
Add initial support for the Nuvoton W83667HG chip to the w83627ehf
driver. It has been tested on ASUS P5QL PRO by Gong Jun.

At the moment there is still a usability issue which is that only in6
or temp3 can be present on the W83667HG, so the driver shouldn't
expose both. This will be addressed later.

Signed-off-by: Gong Jun <JGong@nuvoton.com>
Acked-by: David Hubbard <david.c.hubbard@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-30 21:46:42 +02:00
Jean Delvare
25f3311acc hwmon: (ds1621) Clean up documentation
* The alarms sysfs file is deprecated, and individual alarm files are
  self-explanatory.
* The driver doesn't implement high-reslution temperature readings so
  don't document that.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
2009-03-30 21:46:41 +02:00
Darrick J. Wong
1a51e068c9 hwmon: (lm90) Document support for the MAX6648/6692 chips
Update documentation to prevent further confusion/duplication.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-12 13:36:38 +01:00
Pavel Machek
ef2cfc790b hp accelerometer: add freefall detection
This adds freefall handling to hp_accel driver.  According to HP, it
should just work, without us having to set the chip up by hand.

hpfall.c is example .c program that parks the disk when accelerometer
detects free fall.  It should work; for now, it uses fixed 20seconds
protection period.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18 15:37:54 -08:00
Linus Torvalds
7e92214b53 Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (abituguru3) Fix CONFIG_DMI=n fallback to probe
  hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAX
  hwmon: (abituguru3) Match partial DMI board name strings
  hwmon: Add a driver for the ADT7475 hardware monitoring chip
  hwmon: (k8temp) Fix temperature reporting for (most) K8 RevG CPUs
  hwmon: (k8temp) Fix wrong sensor selection for AMD K8 RevF/RevG CPUs
  hwmon: (k8temp) Warn about fam F rev F errata
2009-01-15 16:40:12 -08:00
Pavel Machek
219beb291b lis3: fix documentation to fit into 80 columns
Fix lis3 documentation to fit into 80 columns.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15 16:39:41 -08:00
Jordan Crouse
1c301fc539 hwmon: Add a driver for the ADT7475 hardware monitoring chip
Hwmon driver for the ADT7475 chip.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-15 22:27:47 +01:00
Coly Li
73ac36ea14 fix similar typos to successfull
When I review ocfs2 code, find there are 2 typos to "successfull".  After
doing grep "successfull " in kernel tree, 22 typos found totally -- great
minds always think alike :)

This patch fixes all the similar typos. Thanks for Randy's ack and comments.

Signed-off-by: Coly Li <coyli@suse.de>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Vlad Yasevich <vladislav.yasevich@hp.com>
Cc: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:15 -08:00
Linus Torvalds
2f2408a88c Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (29 commits)
  hwmon: Fix various typos
  hwmon: Check for ACPI resource conflicts
  hwmon: (lm70) Add TI TMP121 support
  hwmon: (lm70) Code streamlining and cleanup
  hwmon: Deprecate the fscher and fscpos drivers
  hwmon: (fschmd) Add watchdog support
  hwmon: (fschmd) Cleanups for watchdog support
  hwmon: (i5k_amb) Load automatically on all 5000/5400 chipsets
  hwmon: (it87) Add support for the ITE IT8720F
  hwmon: Don't overuse I2C_CLIENT_MODULE_PARM
  hwmon: Add LTC4245 driver
  hwmon: (f71882fg) Fix fan_to/from_reg prototypes
  hwmon: (f71882fg) Printout fan modes
  hwmon: (f71882fg) Add documentation
  hwmon: (f71882fg) Fix auto_channels_temp temp numbering with f8000
  hwmon: (f71882fg) Add missing pwm3 attr for f71862fg
  hwmon: (f71882fg) Add F8000 support
  hwmon: (f71882fg) Remove the fan_mode module option
  hwmon: (f71882fg) Separate max and crit alarm and beep
  hwmon: (f71882fg) Check for hwmon powerdown state
  ...
2009-01-07 11:59:51 -08:00
Linus Torvalds
57c44c5f6f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits)
  trivial: chack -> check typo fix in main Makefile
  trivial: Add a space (and a comma) to a printk in 8250 driver
  trivial: Fix misspelling of "firmware" in docs for ncr53c8xx/sym53c8xx
  trivial: Fix misspelling of "firmware" in powerpc Makefile
  trivial: Fix misspelling of "firmware" in usb.c
  trivial: Fix misspelling of "firmware" in qla1280.c
  trivial: Fix misspelling of "firmware" in a100u2w.c
  trivial: Fix misspelling of "firmware" in megaraid.c
  trivial: Fix misspelling of "firmware" in ql4_mbx.c
  trivial: Fix misspelling of "firmware" in acpi_memhotplug.c
  trivial: Fix misspelling of "firmware" in ipw2100.c
  trivial: Fix misspelling of "firmware" in atmel.c
  trivial: Fix misspelled firmware in Kconfig
  trivial: fix an -> a typos in documentation and comments
  trivial: fix then -> than typos in comments and documentation
  trivial: update Jesper Juhl CREDITS entry with new email
  trivial: fix singal -> signal typo
  trivial: Fix incorrect use of "loose" in event.c
  trivial: printk: fix indentation of new_text_line declaration
  trivial: rtc-stk17ta8: fix sparse warning
  ...
2009-01-07 11:31:52 -08:00
Jean Delvare
77fa49d94a hwmon: Fix various typos
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: David Hubbard <david.c.hubbard@gmail.com>
2009-01-07 16:37:35 +01:00
Manuel Lauss
c8ac32e471 hwmon: (lm70) Add TI TMP121 support
The Texas Instruments TMP121 is a SPI temperature sensor very similar
to the LM70, with slightly higher resolution.  This patch extends the
LM70 driver to support the TMP121.  The TMP123 differs in pin assign-
ment.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-07 16:37:34 +01:00
Kaiwan N Billimoria
2b7300513b hwmon: (lm70) Code streamlining and cleanup
This fixes a byteswap bug in the LM70 temperature sensor driver,
which was previously covered up by a converse bug in the driver
for the LM70EVAL-LLP board (which is also fixed).

Other fixes:  doc updates, remove an annoying msleep(), and improve
three-wire protocol handling.

Signed-off-by: Kaiwan N Billimoria <kaiwan@designergraphix.com>
[ dbrownell@users.sourceforge.net: doc and whitespace tweaks ]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-07 16:37:34 +01:00
Jean-Marc Spaggiari
b4da93e4b0 hwmon: (it87) Add support for the ITE IT8720F
Allow it87.c to handle IT8720 chipset like IT8718 in order to
retrieve voltage, temperatures and fans speed from sensors
tools. Also updating the related documentation.

Signed-off-by: Jean-Marc Spaggiari <jean-marc@spaggiari.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-07 16:37:32 +01:00
Ira Snyder
6e34b187bc hwmon: Add LTC4245 driver
Add Linux support for the Linear Technology LTC4245 Multiple Supply Hot
Swap controller I2C monitoring interface.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-07 16:37:32 +01:00
Hans de Goede
3b02d332b6 hwmon: (f71882fg) Add documentation
Add some documentation about the f71882fg driver, and update the Kconfig
documentation to report the new supported models.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-07 16:37:31 +01:00
Darrick J. Wong
89fac11cb3 adt7470: make automatic fan control really work
It turns out that the adt7470's automatic fan control algorithm only works
when the temperature sensors get updated.  This in turn happens only when
someone tells the chip to read its temperature sensors.  Regrettably, this
means that we have to drive the chip periodically.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:18 -08:00
Frederik Schwarzer
025dfdafe7 trivial: fix then -> than typos in comments and documentation
- (better, more, bigger ...) then -> (...) than

Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-06 11:28:06 +01:00
Darrick J. Wong
c0b4e3ab0c adt7462: new hwmon driver
New driver to play with.  As Jean mentioned a couple of years ago, this
chip is a beast with odd combinations of 8 fans, 4 temperatures, and 13
voltage sensors.  This driver has been tested on an IntelliStation Z30.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-12 17:17:17 -08:00
Pavel Machek
455fbdd376 LIS3LV02Dx Accelerometer driver
This adds a driver to the accelerometer sensor found in several HP
laptops (under the commercial names of "HP Mobile Data Protection System
3D" and "HP 3D driveguard").  It tries to have more or less the same
interfaces as the hdaps and other accelerometer drivers: in sysfs and as
a joystick.

This driver was first written by Yan Burman.  Eric Piel has updated it
and slimed it up (including the removal of an interface to access to the
free-fall feature of the sensor because it is not reliable enough for
now).  Pavel Machek removed few more features and switched locking from
semaphore to mutex.

Several people have contributed to the database of the axes.

[eric.piel@tremplin-utc.net: LIS3LV02D: Conform to the new ACPI API]
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Yan Burman <burman.yan@gmail.com>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-12 17:17:17 -08:00
Jean Delvare
97ae60bb38 hwmon: (lm90) Add support for the LM99 16 degree offset
The LM99 differs from the LM86, LM89 and LM90 in that it reports
remote temperatures (temp2) 16 degrees lower than they really are. So
far we have been cheating and handled this in userspace but it really
should be handled by the driver directly.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
2008-10-26 17:04:39 +01:00
Darrick J. Wong
d664a4809e hwmon: (adt7470) Add documentation
Add at least the bare minimum of documentation for this chip.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:20 +02:00
Jean Delvare
10c08f937d hwmon: (w83781d) Additional information about AS99127F PWM
This information was provided in lm-sensors ticket #2350:
http://www.lm-sensors.org/ticket/2350

This is IMHO still not enough to be able to safely implement fan
control support for the AS99127F, but this is valuable information so
I am adding it to the documentation.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:18 +02:00
Jean Delvare
6aa693b852 hwmon: Drop dead links to old National Semiconductor chip datasheets
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:17 +02:00
Marc Hulsman
a5a4598cd2 hwmon: (w83791d) add support for thermal cruise mode
Add support to set target temperature and tolerance for thermal
cruise mode.

Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:17 +02:00
Marc Hulsman
b5938f8c4a hwmon: (w83791d) add pwm_enable support
Add support for pwm_enable.

Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:17 +02:00
Marc Hulsman
6495ce1840 hwmon: (w83791d) add manual PWM support
Add PWM manual control.

Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:17 +02:00
Jean Delvare
4ed1077953 hwmon: (it87) Fix thermal sensor type values
The it87 driver doesn't follow the standard sensor type values as
documented in Documentation/hwmon/sysfs-interface. It uses value 2 for
thermistors instead of value 4. This causes "sensors" to tell the user
that the chip is setup for a transistor while it is actually setup for
a thermistor.

Using value 4 for thermistors solves the problem. For compatibility
reasons, we still accept value 2 but emit a warning message so that
users update their configuration files.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2008-10-17 17:51:16 +02:00
Jean Delvare
34e7dc6ca4 hwmon: (lm85) Implement the standard PWM frequency interface
Implement the standard PWM frequency interface: pwm[1-*]_freq in
units of 1 Hz, instead of the non-standard pwm[1-*]_auto_pwm_freq
in units of 0.1 Hz. The old naming was not only non-standard, it was
also confusing, because it suggested that the frequency value only
applied in automatic fan speed mode, which isn't true.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
2008-10-17 17:51:13 +02:00
Ben Hutchings
47064d645b hwmon: (lm87) Add support for configuration through platform_data
The lm87 driver normally assumes that firmware configured the chip
correctly.  Since this is not always the case, alllow platform code to
set the channel register value via platform_data.  All other
configuration registers can be changed after driver initialisation.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:12 +02:00
Ben Hutchings
271dabf5bb hwmon: (lm90) Support MAX6646, MAX6647 and MAX6649
These Maxim chips are similar to MAX6657 but use unsigned temperature
values to allow for readings up to 145 degrees.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:11 +02:00
Nate Case
23b2d4778a hwmon: (lm90) Support ADT7461 in extended mode
Support ADT7461 in extended temperature range mode, which will change
the range of readings from 0..127 to -64..191 degC.  Adjust the
register conversion functions accordingly.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:10 +02:00
Jean Delvare
a874a10cf0 hwmon: (lm90) Update datasheet links
Update the links to the datasheet of some of the devices supported by
the lm90 driver. Also remove the links from the driver itself, so that
we don't have to update them twice each time they change.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:10 +02:00
Jean Delvare
f65e17086f hwmon: (lm90) Support the extra resolution bits of MAX6657
The Maxim MAX6657, MAX6658 and MAX6659 have extra resolution bits for
the local temperature measurement. Let the lm90 driver read them and
export them to user-space.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:09 +02:00
Darrick J. Wong
c73c556c1a hwmon: (adt7473) Fix some bogosity in documentation file
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09 15:33:58 +02:00