Up until now the_integrity profile has been dynamically allocated and
attached to struct gendisk after the disk has been made active.
This causes problems because NVMe devices need to register the profile
prior to the partition table being read due to a mandatory metadata
buffer requirement. In addition, DM goes through hoops to deal with
preallocating, but not initializing integrity profiles.
Since the integrity profile is small (4 bytes + a pointer), Christoph
suggested moving it to struct gendisk proper. This requires several
changes:
- Moving the blk_integrity definition to genhd.h.
- Inlining blk_integrity in struct gendisk.
- Removing the dynamic allocation code.
- Adding helper functions which allow gendisk to set up and tear down
the integrity sysfs dir when a disk is added/deleted.
- Adding a blk_integrity_revalidate() callback for updating the stable
pages bdi setting.
- The calls that depend on whether a device has an integrity profile or
not now key off of the bi->profile pointer.
- Simplifying the integrity support routines in DM (Mike Snitzer).
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
reada is using -1 instead of the -ENOMEM defined macro to specify that
a buffer allocation failed. Since the error number is propagated, the
caller will get a -EPERM which is the wrong error condition.
Also, updating the caller to return the exact value from
reada_add_block.
Smatch tool warning:
reada_add_block() warn: returning -1 instead of -ENOMEM is sloppy
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: David Sterba <dsterba@suse.com>
check-integrity is using -1 instead of the -ENOMEM defined macro to
specify that a buffer allocation failed. Since the error number is
propagated, the caller will get a -EPERM which is the wrong error
condition.
Also, the smatch tool complains with the following warnings:
btrfsic_process_superblock() warn: returning -1 instead of -ENOMEM is sloppy
btrfsic_read_block() warn: returning -1 instead of -ENOMEM is sloppy
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Below variables are defined per compress type.
- struct list_head comp_idle_workspace[BTRFS_COMPRESS_TYPES]
- spinlock_t comp_workspace_lock[BTRFS_COMPRESS_TYPES]
- int comp_num_workspace[BTRFS_COMPRESS_TYPES]
- atomic_t comp_alloc_workspace[BTRFS_COMPRESS_TYPES]
- wait_queue_head_t comp_workspace_wait[BTRFS_COMPRESS_TYPES]
BTW, while accessing one compress type of these variables, the next or
before address is other compress types of it.
So this patch puts these variables in a struct to make cache friendly.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch eliminates the last item of prop_handlers array which is used
to check end of array and instead uses ARRAY_SIZE macro.
Though this is a very tiny optimization, using ARRAY_SIZE macro is a
good practice to iterate array.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just fix a typo in the code comment.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: David Sterba <dsterba@suse.com>
rsv_count ultimately gets passed to start_transaction() which
now takes an unsigned int as its num_items parameter.
The value of rsv_count should always be positive so declare it
as being unsigned.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The value of num_items that start_transaction() ultimately
always takes is a small one, so a 64 bit integer is overkill.
Also change num_items for btrfs_start_transaction() and
btrfs_start_transaction_lflush() as well.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Improve readability by generalizing the profile validity checks.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The commit b37392ea86 ("Btrfs: cleanup unnecessary parameter
and variant of prepare_pages()") makes it redundant.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Shan Hai <haishan.bai@hotmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_raid_array[] holds attributes of all raid types.
Use btrfs_raid_array[].devs_min is best way for request
in btrfs_reduce_alloc_profile(), instead of use complex
condition of each raid types.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_raid_array[] is used to define all raid attributes, use it
to get tolerated_failures in btrfs_get_num_tolerated_disk_barrier_failures(),
instead of complex condition in function.
It can make code simple and auto-support other possible raid-type in
future.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This array is used to record attributes of each raid type,
make it public, and many functions will benifit with this array.
For example, num_tolerated_disk_barrier_failures(), we can
avoid complex conditions in this function, and get raid attribute
simply by accessing above array.
It can also make code logic simple, reduce duplication code, and
increase maintainability.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rather than have three separate if() statements for the same outcome
we should just OR them together in the same if() statement.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use memset() to null out the btrfs_delayed_ref_root of
btrfs_transaction instead of setting all the members to 0 by hand.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can safely iterate whole list items, without using list_del macro.
So remove the list_del call.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no removing list element while iterating over list.
So, replace list_for_each_entry_safe to list_for_each_entry.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just call kmem_cache_zalloc() instead of calling kmem_cache_alloc().
We're just initializing most fields to 0, false and NULL later on
_anyway_, so to make the code mode readable and potentially gain
a bit of performance (completely untested claim), we should fill our
btrfs_trans_handle with zeros on allocation then just initialize
those five remaining fields (not counting the list_heads) as normal.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
old_len is used to store the return value of btrfs_item_size_nr().
The return value of btrfs_item_size_nr() is of type u32.
To improve code correctness and avoid mixing signed and unsigned
integers I've changed old_len to be of type u32 as well.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The return values of btrfs_item_offset_nr and btrfs_item_size_nr are of
type u32. To avoid mixing signed and unsigned integers we should also
declare dsize and last_off to be of type u32.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a new wrapper function pstore_register_kmsg to keep the
consistency with other similar pstore_register_* functions.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Current code will always truncate tailing page if its alloc_start is
smaller than inode size.
For example, the file extent layout is like:
0 4K 8K 16K 32K
|<-----Extent A---------------->|
|<--Inode size: 18K---------->|
But if calling fallocate even for range [0,4K), it will cause btrfs to
re-truncate the range [16,32K), causing COW and a new extent.
0 4K 8K 16K 32K
|///////| <- Fallocate call range
|<-----Extent A-------->|<--B-->|
The cause is quite easy, just a careless btrfs_truncate_inode() in a
else branch without extra judgment.
Fix it by add judgment on whether the fallocate range is beyond isize.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Users expect bmap will give allocated block addresses.
Let's play likewise ext4.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add locking to ensure that DAX faults are isolated from ext2 operations
that modify the data blocks allocation for an inode. This is intended to
be analogous to the work being done in XFS by Dave Chinner:
http://www.spinics.net/lists/linux-fsdevel/msg90260.html
Compared with XFS the ext2 case is greatly simplified by the fact that ext2
already allocates and zeros new blocks before they are returned as part of
ext2_get_block(), so DAX doesn't need to worry about getting unmapped or
unwritten buffer heads.
This means that the only work we need to do in ext2 is to isolate the DAX
faults from inode block allocation changes. I believe this just means that
we need to isolate the DAX faults from truncate operations.
The newly introduced dax_sem is intended to replicate the protection
offered by i_mmaplock in XFS. In addition to truncate the i_mmaplock also
protects XFS operations like hole punching, fallocate down, extent
manipulation IOCTLS like xfs_ioc_space() and extent swapping. Truncate is
the only one of these operations supported by ext2.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.com>
The ext4_fsblk_t type is a long long, which should not be used
with abs(), as is done in ext4_mb_check_group_pa().
This patch modifies ext4_mb_check_group_pa() to use abs64()
instead.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It is appeared that we can pass journal related mount options and such options
be shown in /proc/mounts
Example:
#mkfs.ext4 -F /dev/vdb
#tune2fs -O ^has_journal /dev/vdb
#mount /dev/vdb /mnt/ -ocommit=20,journal_async_commit
#cat /proc/mounts | grep /mnt
/dev/vdb /mnt ext4 rw,relatime,journal_checksum,journal_async_commit,commit=20,data=ordered 0 0
But options:"journal_checksum,journal_async_commit,commit=20,data=ordered" has
nothing with reality because there is no journal at all.
This patch disallow following options for journalless configurations:
- journal_checksum
- journal_async_commit
- commit=%ld
- data={writeback,ordered,journal}
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Currently MOPT_EXPLICIT treated as EXPLICIT_DELALLOC which may be changed
in future. Let's fix it now.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Added a new function __compat_only_sysfs_link_group_to_kobj() that adds
a symlink from attribute or group to a kobject. This needed for
maintaining backwards compatibility with PPI attributes in the TPM
driver.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
If a EXT4 filesystem utilizes JBD2 journaling and an error occurs, the
journaling will be aborted first and the error number will be recorded
into JBD2 superblock and, finally, the system will enter into the
panic state in "errors=panic" option. But, in the rare case, this
sequence is little twisted like the below figure and it will happen
that the system enters into panic state, which means the system reset
in mobile environment, before completion of recording an error in the
journal superblock. In this case, e2fsck cannot recognize that the
filesystem failure occurred in the previous run and the corruption
wouldn't be fixed.
Task A Task B
ext4_handle_error()
-> jbd2_journal_abort()
-> __journal_abort_soft()
-> __jbd2_journal_abort_hard()
| -> journal->j_flags |= JBD2_ABORT;
|
| __ext4_abort()
| -> jbd2_journal_abort()
| | -> __journal_abort_soft()
| | -> if (journal->j_flags & JBD2_ABORT)
| | return;
| -> panic()
|
-> jbd2_journal_update_sb_errno()
Tested-by: Hobin Woo <hobin.woo@samsung.com>
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Add debugfs_create_ulong() for the users of type 'unsigned long'. These
will be 32 bits long on a 32 bit machine and 64 bits long on a 64 bit
machine.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There aren't any read-only or write-only bool file ops, but there
is a caller of debugfs_create_bool() that calls it with mode
equal to 0400. This leads to the possibility of userspace
modifying the file, so let's use the newly created
debugfs_create_mode() helper here to fix this.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There aren't any read-only or write-only size_t file ops, but there
is a caller of debugfs_create_size_t() that calls it with mode
equal to 0400. This leads to the possibility of userspace
modifying the file, so let's use the newly created
debugfs_create_mode() helper here to fix this.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There aren't any read-only or write-only x64 file ops, but there
is a caller of debugfs_create_x64() that calls it with mode equal
to S_IRUGO. This leads to the possibility of userspace modifying
the file, so let's use the newly created debugfs_create_mode()
helper here to fix this.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code that creates debugfs file with different file ops based
on the file mode is duplicated in each debugfs_create_*() API.
Consolidate that code into debugfs_create_mode(), that takes
three file ops structures so that we don't have to keep
copy/pasting that logic.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"group" is the group where the backup will be placed, and is
initialized to zero in the declaration. This meant that backups for
meta_bg descriptors were erroneously written to the backup block group
descriptors in groups 1 and (desc_per_block-1).
Reproduction information:
mke2fs -Fq -t ext4 -b 1024 -O ^resize_inode /tmp/foo.img 16G
truncate -s 24G /tmp/foo.img
losetup /dev/loop0 /tmp/foo.img
mount /dev/loop0 /mnt
resize2fs /dev/loop0
umount /dev/loop0
dd if=/dev/zero of=/dev/loop0 bs=1024 count=2
e2fsck -fy /dev/loop0
losetup -d /dev/loop0
Signed-off-by: Andy Leiserson <andy@leiserson.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
There is a use-after-free possibility in __ext4_journal_stop() in the
case that we free the handle in the first jbd2_journal_stop() because
we're referencing handle->h_err afterwards. This was introduced in
9705acd63b and it is wrong. Fix it by
storing the handle->h_err value beforehand and avoid referencing
potentially freed handle.
Fixes: 9705acd63b
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
Unlike comments and expectation of callers journal_clean_one_cp_list()
returned 1 not only if it freed the transaction but also if it freed
some buffers in the transaction. That could make
__jbd2_journal_clean_checkpoint_list() skip processing
t_checkpoint_io_list and continue with processing the next transaction.
This is mostly a cosmetic issue since the only result is we can
sometimes free less memory than we could. But it's still worth fixing.
Fix journal_clean_one_cp_list() to return 1 only if the transaction was
really freed.
Fixes: 50849db32a
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
When you repeatly execute xfstest generic/269 with bigalloc_1k option
enabled using the below command:
"./kvm-xfstests -c bigalloc_1k -m nodelalloc -C 1000 generic/269"
you can easily see the below bug message.
"JBD2 unexpected failure: jbd2_journal_revoke: !buffer_revoked(bh);"
This means that an already revoked buffer is erroneously revoked again
and it is caused by doing revoke for the buffer at the wrong position
in ext4_free_blocks(). We need to re-position the buffer revoke
procedure for an unspecified buffer after checking the cluster boundary
for bigalloc option. If not, some part of the cluster can be doubly
revoked.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Make the bitmap reaading routines return real error codes (EIO,
EFSCORRUPTED, EFSBADCRC) which can then be reflected back to
userspace for more precise diagnosis work.
In particular, this means that mballoc no longer claims that we're out
of memory if the block bitmaps become corrupt.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros. Furthermore, clean out the
places where we open-coded feature tests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros. Furthermore, clean out the
places where we open-coded feature tests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of overloading EIO for CRC errors and corrupt structures,
return the same error codes that XFS returns for the same issues.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Allow the filesystem to store the metadata checksum seed in the
superblock and add an incompat feature to say that we're using it.
This enables tune2fs to change the UUID on a mounted metadata_csum
FS without having to (racy!) rewrite all disk metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When truncating a file to a smaller size which consists of an inline
extent that is compressed, we did not discard (or made unusable) the
data between the new file size and the old file size, wasting metadata
space and allowing for the truncated data to be leaked and the data
corruption/loss mentioned below.
We were also not correctly decrementing the number of bytes used by the
inode, we were setting it to zero, giving a wrong report for callers of
the stat(2) syscall. The fsck tool also reported an error about a mismatch
between the nbytes of the file versus the real space used by the file.
Now because we weren't discarding the truncated region of the file, it
was possible for a caller of the clone ioctl to actually read the data
that was truncated, allowing for a security breach without requiring root
access to the system, using only standard filesystem operations. The
scenario is the following:
1) User A creates a file which consists of an inline and compressed
extent with a size of 2000 bytes - the file is not accessible to
any other users (no read, write or execution permission for anyone
else);
2) The user truncates the file to a size of 1000 bytes;
3) User A makes the file world readable;
4) User B creates a file consisting of an inline extent of 2000 bytes;
5) User B issues a clone operation from user A's file into its own
file (using a length argument of 0, clone the whole range);
6) User B now gets to see the 1000 bytes that user A truncated from
its file before it made its file world readbale. User B also lost
the bytes in the range [1000, 2000[ bytes from its own file, but
that might be ok if his/her intention was reading stale data from
user A that was never supposed to be public.
Note that this contrasts with the case where we truncate a file from 2000
bytes to 1000 bytes and then truncate it back from 1000 to 2000 bytes. In
this case reading any byte from the range [1000, 2000[ will return a value
of 0x00, instead of the original data.
This problem exists since the clone ioctl was added and happens both with
and without my recent data loss and file corruption fixes for the clone
ioctl (patch "Btrfs: fix file corruption and data loss after cloning
inline extents").
So fix this by truncating the compressed inline extents as we do for the
non-compressed case, which involves decompressing, if the data isn't already
in the page cache, compressing the truncated version of the extent, writing
the compressed content into the inline extent and then truncate it.
The following test case for fstests reproduces the problem. In order for
the test to pass both this fix and my previous fix for the clone ioctl
that forbids cloning a smaller inline extent into a larger one,
which is titled "Btrfs: fix file corruption and data loss after cloning
inline extents", are needed. Without that other fix the test fails in a
different way that does not leak the truncated data, instead part of
destination file gets replaced with zeroes (because the destination file
has a larger inline extent than the source).
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_cloner
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount "-o compress"
# Create our test files. File foo is going to be the source of a clone operation
# and consists of a single inline extent with an uncompressed size of 512 bytes,
# while file bar consists of a single inline extent with an uncompressed size of
# 256 bytes. For our test's purpose, it's important that file bar has an inline
# extent with a size smaller than foo's inline extent.
$XFS_IO_PROG -f -c "pwrite -S 0xa1 0 128" \
-c "pwrite -S 0x2a 128 384" \
$SCRATCH_MNT/foo | _filter_xfs_io
$XFS_IO_PROG -f -c "pwrite -S 0xbb 0 256" $SCRATCH_MNT/bar | _filter_xfs_io
# Now durably persist all metadata and data. We do this to make sure that we get
# on disk an inline extent with a size of 512 bytes for file foo.
sync
# Now truncate our file foo to a smaller size. Because it consists of a
# compressed and inline extent, btrfs did not shrink the inline extent to the
# new size (if the extent was not compressed, btrfs would shrink it to 128
# bytes), it only updates the inode's i_size to 128 bytes.
$XFS_IO_PROG -c "truncate 128" $SCRATCH_MNT/foo
# Now clone foo's inline extent into bar.
# This clone operation should fail with errno EOPNOTSUPP because the source
# file consists only of an inline extent and the file's size is smaller than
# the inline extent of the destination (128 bytes < 256 bytes). However the
# clone ioctl was not prepared to deal with a file that has a size smaller
# than the size of its inline extent (something that happens only for compressed
# inline extents), resulting in copying the full inline extent from the source
# file into the destination file.
#
# Note that btrfs' clone operation for inline extents consists of removing the
# inline extent from the destination inode and copy the inline extent from the
# source inode into the destination inode, meaning that if the destination
# inode's inline extent is larger (N bytes) than the source inode's inline
# extent (M bytes), some bytes (N - M bytes) will be lost from the destination
# file. Btrfs could copy the source inline extent's data into the destination's
# inline extent so that we would not lose any data, but that's currently not
# done due to the complexity that would be needed to deal with such cases
# (specially when one or both extents are compressed), returning EOPNOTSUPP, as
# it's normally not a very common case to clone very small files (only case
# where we get inline extents) and copying inline extents does not save any
# space (unlike for normal, non-inlined extents).
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/foo $SCRATCH_MNT/bar
# Now because the above clone operation used to succeed, and due to foo's inline
# extent not being shinked by the truncate operation, our file bar got the whole
# inline extent copied from foo, making us lose the last 128 bytes from bar
# which got replaced by the bytes in range [128, 256[ from foo before foo was
# truncated - in other words, data loss from bar and being able to read old and
# stale data from foo that should not be possible to read anymore through normal
# filesystem operations. Contrast with the case where we truncate a file from a
# size N to a smaller size M, truncate it back to size N and then read the range
# [M, N[, we should always get the value 0x00 for all the bytes in that range.
# We expected the clone operation to fail with errno EOPNOTSUPP and therefore
# not modify our file's bar data/metadata. So its content should be 256 bytes
# long with all bytes having the value 0xbb.
#
# Without the btrfs bug fix, the clone operation succeeded and resulted in
# leaking truncated data from foo, the bytes that belonged to its range
# [128, 256[, and losing data from bar in that same range. So reading the
# file gave us the following content:
#
# 0000000 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1
# *
# 0000200 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a
# *
# 0000400
echo "File bar's content after the clone operation:"
od -t x1 $SCRATCH_MNT/bar
# Also because the foo's inline extent was not shrunk by the truncate
# operation, btrfs' fsck, which is run by the fstests framework everytime a
# test completes, failed reporting the following error:
#
# root 5 inode 257 errors 400, nbytes wrong
status=0
exit
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Pull btrfs fixes from Chris Mason:
"I have two more bug fixes for btrfs.
My commit fixes a bug we hit last week at FB, a combination of lots of
hard links and an admin command to resolve inode numbers.
Dave is adding checks to make sure balance on current kernels ignores
filters it doesn't understand. The penalty for being wrong is just
doing more work (not crashing etc), but it's a good fix"
* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: fix use after free iterating extrefs
btrfs: check unsupported filters in balance arguments
Merge misc fixes from Andrew Morton:
"6 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
sh: add copy_user_page() alias for __copy_user()
lib/Kconfig: ZLIB_DEFLATE must select BITREVERSE
mm, dax: fix DAX deadlocks
memcg: convert threshold to bytes
builddeb: remove debian/files before build
mm, fs: obey gfp_mapping for add_to_page_cache()
The following two locking commits in the DAX code:
commit 843172978b ("dax: fix race between simultaneous faults")
commit 46c043ede4 ("mm: take i_mmap_lock in unmap_mapping_range() for DAX")
introduced a number of deadlocks and other issues which need to be fixed
for the v4.3 kernel. The list of issues in DAX after these commits
(some newly introduced by the commits, some preexisting) can be found
here:
https://lkml.org/lkml/2015/9/25/602 (Subject: "Re: [PATCH] dax: fix deadlock in __dax_fault").
This undoes most of the changes introduced by those two commits,
essentially returning us to the DAX locking scheme that was used in
v4.2.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dave Chinner <dchinner@redhat.com>
Cc: Jan Kara <jack@suse.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 6afdb859b7 ("mm: do not ignore mapping_gfp_mask in page cache
allocation paths") has caught some users of hardcoded GFP_KERNEL used in
the page cache allocation paths. This, however, wasn't complete and
there were others which went unnoticed.
Dave Chinner has reported the following deadlock for xfs on loop device:
: With the recent merge of the loop device changes, I'm now seeing
: XFS deadlock on my single CPU, 1GB RAM VM running xfs/073.
:
: The deadlocked is as follows:
:
: kloopd1: loop_queue_read_work
: xfs_file_iter_read
: lock XFS inode XFS_IOLOCK_SHARED (on image file)
: page cache read (GFP_KERNEL)
: radix tree alloc
: memory reclaim
: reclaim XFS inodes
: log force to unpin inodes
: <wait for log IO completion>
:
: xfs-cil/loop1: <does log force IO work>
: xlog_cil_push
: xlog_write
: <loop issuing log writes>
: xlog_state_get_iclog_space()
: <blocks due to all log buffers under write io>
: <waits for IO completion>
:
: kloopd1: loop_queue_write_work
: xfs_file_write_iter
: lock XFS inode XFS_IOLOCK_EXCL (on image file)
: <wait for inode to be unlocked>
:
: i.e. the kloopd, with it's split read and write work queues, has
: introduced a dependency through memory reclaim. i.e. that writes
: need to be able to progress for reads make progress.
:
: The problem, fundamentally, is that mpage_readpages() does a
: GFP_KERNEL allocation, rather than paying attention to the inode's
: mapping gfp mask, which is set to GFP_NOFS.
:
: The didn't used to happen, because the loop device used to issue
: reads through the splice path and that does:
:
: error = add_to_page_cache_lru(page, mapping, index,
: GFP_KERNEL & mapping_gfp_mask(mapping));
This has changed by commit aa4d86163e ("block: loop: switch to VFS
ITER_BVEC").
This patch changes mpage_readpage{s} to follow gfp mask set for the
mapping. There are, however, other places which are doing basically the
same.
lustre:ll_dir_filler is doing GFP_KERNEL from the function which
apparently uses GFP_NOFS for other allocations so let's make this
consistent.
cifs:readpages_get_pages is called from cifs_readpages and
__cifs_readpages_from_fscache called from the same path obeys mapping
gfp.
ramfs_nommu_expand_for_mapping is hardcoding GFP_KERNEL as well
regardless it uses mapping_gfp_mask for the page allocation.
ext4_mpage_readpages is the called from the page cache allocation path
same as read_pages and read_cache_pages
As I've noticed in my previous post I cannot say I would be happy about
sprinkling mapping_gfp_mask all over the place and it sounds like we
should drop gfp_mask argument altogether and use it internally in
__add_to_page_cache_locked that would require all the filesystems to use
mapping gfp consistently which I am not sure is the case here. From a
quick glance it seems that some file system use it all the time while
others are selective.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ext4 Kconfig description fixup from Jan Kara:
"A small fixup in description of EXT4_USE_FOR_EXT2 config option"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext4: Update EXT4_USE_FOR_EXT2 description
It follows btrfs BTRFS_IOC_CLONE_RANGE lead on ioctl number and
arguments.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
draft-ietf-nfsv4-minorversion2-38.txt says:
Both cl_src_offset and
cl_dst_offset must be aligned to the clone block size Section 12.2.1.
The number of bytes to be cloned must be a multiple of the clone
block size, except in the case in which cl_src_offset plus the number
of bytes to be cloned is equal to the source file size.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
NFSv42 CLONE operation is supposed to respect it.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It can be called by user space to CLONE two files.
Follow btrfs lead and define NFS_IOC_CLONE same as BTRFS_IOC_CLONE.
Thus we don't mess up userspace with too many ioctls.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Prevent clean ext3 filesystems from mounting by default with the ext2
driver (with no journal!) by putting ext4 ahead of ext2 in the default
probe order. This will have the effect of mounting ext2 filesystems
with ext4.ko by default, which is a safer failure than hoping the user
notices that their journalled ext3 is now running without a journal!
Users who require ext2.ko for ext2 can either disable ext4.ko or
explicitly request ext2 via "mount -t ext2" or "rootfstype=ext2".
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Change the journal's checksum functions to gate on whether or not the
crc32c driver is loaded, and gate the loading on the superblock bits.
This prevents a journal crash if someone loads a journal in no-csum
mode and then randomizes the superblock, thus flipping on the feature
bits.
Tested-By: Nikolay Borisov <kernel@kyup.com>
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If there is a error while copying data from userspace into the page
cache during a write(2) system call, in data=journal mode, in
ext4_journalled_write_end() were using page_zero_new_buffers() from
fs/buffer.c. Unfortunately, this sets the buffer dirty flag, which is
no good if journalling is enabled. This is a long-standing bug that
goes back for years and years in ext3, but a combination of (a)
data=journal not being very common, (b) in many case it only results
in a warning message. and (c) only very rarely causes the kernel hang,
means that we only really noticed this as a problem when commit
998ef75ddb caused this failure to happen frequently enough to cause
generic/208 to fail when run in data=journal mode.
The fix is to have our own version of this function that doesn't call
mark_dirty_buffer(), since we will end up calling
ext4_handle_dirty_metadata() on the buffer head(s) in questions very
shortly afterwards in ext4_journalled_write_end().
Thanks to Dave Hansen and Linus Torvalds for helping to identify the
root cause of the problem.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.com>
There are primitives to create and query the software dirty bits
in a pte or pmd. But the clearing of the software dirty bits is done
in common code with x86 specific page table functions.
Add the missing architecture primitives to clear the software dirty
bits to allow the feature to be used on non-x86 systems, e.g. the
s390 architecture.
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If when reading a page we find a hole and our caller had already locked
the range (bio flags has the bit EXTENT_BIO_PARENT_LOCKED set), we end
up unlocking the hole's range and then later our caller unlocks it
again, which might have already been locked by some other task once
the first unlock happened.
Currently this can only happen during a call to the extent_same ioctl,
as it's the only caller of __do_readpage() that sets the bit
EXTENT_BIO_PARENT_LOCKED for bio flags.
Fix this by leaving the unlock exclusively to the caller.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Currently the clone ioctl allows to clone an inline extent from one file
to another that already has other (non-inlined) extents. This is a problem
because btrfs is not designed to deal with files having inline and regular
extents, if a file has an inline extent then it must be the only extent
in the file and must start at file offset 0. Having a file with an inline
extent followed by regular extents results in EIO errors when doing reads
or writes against the first 4K of the file.
Also, the clone ioctl allows one to lose data if the source file consists
of a single inline extent, with a size of N bytes, and the destination
file consists of a single inline extent with a size of M bytes, where we
have M > N. In this case the clone operation removes the inline extent
from the destination file and then copies the inline extent from the
source file into the destination file - we lose the M - N bytes from the
destination file, a read operation will get the value 0x00 for any bytes
in the the range [N, M] (the destination inode's i_size remained as M,
that's why we can read past N bytes).
So fix this by not allowing such destructive operations to happen and
return errno EOPNOTSUPP to user space.
Currently the fstest btrfs/035 tests the data loss case but it totally
ignores this - i.e. expects the operation to succeed and does not check
the we got data loss.
The following test case for fstests exercises all these cases that result
in file corruption and data loss:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_cloner
_require_btrfs_fs_feature "no_holes"
_require_btrfs_mkfs_feature "no-holes"
rm -f $seqres.full
test_cloning_inline_extents()
{
local mkfs_opts=$1
local mount_opts=$2
_scratch_mkfs $mkfs_opts >>$seqres.full 2>&1
_scratch_mount $mount_opts
# File bar, the source for all the following clone operations, consists
# of a single inline extent (50 bytes).
$XFS_IO_PROG -f -c "pwrite -S 0xbb 0 50" $SCRATCH_MNT/bar \
| _filter_xfs_io
# Test cloning into a file with an extent (non-inlined) where the
# destination offset overlaps that extent. It should not be possible to
# clone the inline extent from file bar into this file.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 16K" $SCRATCH_MNT/foo \
| _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo
# Doing IO against any range in the first 4K of the file should work.
# Due to a past clone ioctl bug which allowed cloning the inline extent,
# these operations resulted in EIO errors.
echo "File foo data after clone operation:"
# All bytes should have the value 0xaa (clone operation failed and did
# not modify our file).
od -t x1 $SCRATCH_MNT/foo
$XFS_IO_PROG -c "pwrite -S 0xcc 0 100" $SCRATCH_MNT/foo | _filter_xfs_io
# Test cloning the inline extent against a file which has a hole in its
# first 4K followed by a non-inlined extent. It should not be possible
# as well to clone the inline extent from file bar into this file.
$XFS_IO_PROG -f -c "pwrite -S 0xdd 4K 12K" $SCRATCH_MNT/foo2 \
| _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo2
# Doing IO against any range in the first 4K of the file should work.
# Due to a past clone ioctl bug which allowed cloning the inline extent,
# these operations resulted in EIO errors.
echo "File foo2 data after clone operation:"
# All bytes should have the value 0x00 (clone operation failed and did
# not modify our file).
od -t x1 $SCRATCH_MNT/foo2
$XFS_IO_PROG -c "pwrite -S 0xee 0 90" $SCRATCH_MNT/foo2 | _filter_xfs_io
# Test cloning the inline extent against a file which has a size of zero
# but has a prealloc extent. It should not be possible as well to clone
# the inline extent from file bar into this file.
$XFS_IO_PROG -f -c "falloc -k 0 1M" $SCRATCH_MNT/foo3 | _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo3
# Doing IO against any range in the first 4K of the file should work.
# Due to a past clone ioctl bug which allowed cloning the inline extent,
# these operations resulted in EIO errors.
echo "First 50 bytes of foo3 after clone operation:"
# Should not be able to read any bytes, file has 0 bytes i_size (the
# clone operation failed and did not modify our file).
od -t x1 $SCRATCH_MNT/foo3
$XFS_IO_PROG -c "pwrite -S 0xff 0 90" $SCRATCH_MNT/foo3 | _filter_xfs_io
# Test cloning the inline extent against a file which consists of a
# single inline extent that has a size not greater than the size of
# bar's inline extent (40 < 50).
# It should be possible to do the extent cloning from bar to this file.
$XFS_IO_PROG -f -c "pwrite -S 0x01 0 40" $SCRATCH_MNT/foo4 \
| _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo4
# Doing IO against any range in the first 4K of the file should work.
echo "File foo4 data after clone operation:"
# Must match file bar's content.
od -t x1 $SCRATCH_MNT/foo4
$XFS_IO_PROG -c "pwrite -S 0x02 0 90" $SCRATCH_MNT/foo4 | _filter_xfs_io
# Test cloning the inline extent against a file which consists of a
# single inline extent that has a size greater than the size of bar's
# inline extent (60 > 50).
# It should not be possible to clone the inline extent from file bar
# into this file.
$XFS_IO_PROG -f -c "pwrite -S 0x03 0 60" $SCRATCH_MNT/foo5 \
| _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo5
# Reading the file should not fail.
echo "File foo5 data after clone operation:"
# Must have a size of 60 bytes, with all bytes having a value of 0x03
# (the clone operation failed and did not modify our file).
od -t x1 $SCRATCH_MNT/foo5
# Test cloning the inline extent against a file which has no extents but
# has a size greater than bar's inline extent (16K > 50).
# It should not be possible to clone the inline extent from file bar
# into this file.
$XFS_IO_PROG -f -c "truncate 16K" $SCRATCH_MNT/foo6 | _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo6
# Reading the file should not fail.
echo "File foo6 data after clone operation:"
# Must have a size of 16K, with all bytes having a value of 0x00 (the
# clone operation failed and did not modify our file).
od -t x1 $SCRATCH_MNT/foo6
# Test cloning the inline extent against a file which has no extents but
# has a size not greater than bar's inline extent (30 < 50).
# It should be possible to clone the inline extent from file bar into
# this file.
$XFS_IO_PROG -f -c "truncate 30" $SCRATCH_MNT/foo7 | _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo7
# Reading the file should not fail.
echo "File foo7 data after clone operation:"
# Must have a size of 50 bytes, with all bytes having a value of 0xbb.
od -t x1 $SCRATCH_MNT/foo7
# Test cloning the inline extent against a file which has a size not
# greater than the size of bar's inline extent (20 < 50) but has
# a prealloc extent that goes beyond the file's size. It should not be
# possible to clone the inline extent from bar into this file.
$XFS_IO_PROG -f -c "falloc -k 0 1M" \
-c "pwrite -S 0x88 0 20" \
$SCRATCH_MNT/foo8 | _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo8
echo "File foo8 data after clone operation:"
# Must have a size of 20 bytes, with all bytes having a value of 0x88
# (the clone operation did not modify our file).
od -t x1 $SCRATCH_MNT/foo8
_scratch_unmount
}
echo -e "\nTesting without compression and without the no-holes feature...\n"
test_cloning_inline_extents
echo -e "\nTesting with compression and without the no-holes feature...\n"
test_cloning_inline_extents "" "-o compress"
echo -e "\nTesting without compression and with the no-holes feature...\n"
test_cloning_inline_extents "-O no-holes" ""
echo -e "\nTesting with compression and with the no-holes feature...\n"
test_cloning_inline_extents "-O no-holes" "-o compress"
status=0
exit
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
The code for btrfs inode-resolve has never worked properly for
files with enough hard links to trigger extrefs. It was trying to
get the leaf out of a path after freeing the path:
btrfs_release_path(path);
leaf = path->nodes[0];
item_size = btrfs_item_size_nr(leaf, slot);
The fix here is to use the extent buffer we cloned just a little higher
up to avoid deadlocks caused by using the leaf in the path.
Signed-off-by: Chris Mason <clm@fb.com>
cc: stable@vger.kernel.org # v3.7+
cc: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
We don't verify that all the balance filter arguments supplemented by
the flags are actually known to the kernel. Thus we let it silently pass
and do nothing.
At the moment this means only the 'limit' filter, but we're going to add
a few more soon so it's better to have that fixed. Also in older stable
kernels so that it works with newer userspace tools.
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This fixes a regression introduced by 37b8d27d between v4.1 and v4.2.
When a snapshot is received, its received_uuid is set to the original
uuid of the subvolume. When that snapshot is then resent to a third
filesystem, it's received_uuid is set to the second uuid
instead of the original one. The same was true for the parent_uuid.
This behaviour was partially changed in 37b8d27d, but in that patch
only the parent_uuid was taken from the real original,
not the uuid itself, causing the search for the parent to fail in
the case below.
This happens for example when trying to send a series of linked
snapshots (e.g. created by snapper) from the backup file system back
to the original one.
The following commands reproduce the issue in v4.2.1
(no error in 4.1.6)
# setup three test file systems
for i in 1 2 3; do
truncate -s 50M fs$i
mkfs.btrfs fs$i
mkdir $i
mount fs$i $i
done
echo "content" > 1/testfile
btrfs su snapshot -r 1/ 1/snap1
echo "changed content" > 1/testfile
btrfs su snapshot -r 1/ 1/snap2
# works fine:
btrfs send 1/snap1 | btrfs receive 2/
btrfs send -p 1/snap1 1/snap2 | btrfs receive 2/
# ERROR: could not find parent subvolume
btrfs send 2/snap1 | btrfs receive 3/
btrfs send -p 2/snap1 2/snap2 | btrfs receive 3/
Signed-off-by: Robin Ruede <rruede+git@gmail.com>
Fixes: 37b8d27de5 ("Btrfs: use received_uuid of parent during send")
Cc: stable@vger.kernel.org # v4.2+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Ed Tomlinson <edt@aei.ca>
bug.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Pkuy
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.3-2' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Two nfsd fixes, one for an RDMA crash, one for a pnfs/block protocol
bug"
* tag 'nfsd-4.3-2' of git://linux-nfs.org/~bfields/linux:
svcrdma: Fix NFS server crash triggered by 1MB NFS WRITE
nfsd/blocklayout: accept any minlength
Once f2fs_gc is done, wait_ms is changed once more.
So, its tracepoint would be located after it.
Reported-by: He YunLei <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
different competitors
Since we use different page cache (normally inode's page cache for R/W
and meta inode's page cache for GC) to cache the same physical block
which is belong to an encrypted inode. Writeback of these two page
cache should be exclusive, but now we didn't handle writeback state
well, so there may be potential racing problem:
a)
kworker: f2fs_gc:
- f2fs_write_data_pages
- f2fs_write_data_page
- do_write_data_page
- write_data_page
- f2fs_submit_page_mbio
(page#1 in inode's page cache was queued
in f2fs bio cache, and be ready to write
to new blkaddr)
- gc_data_segment
- move_encrypted_block
- pagecache_get_page
(page#2 in meta inode's page cache
was cached with the invalid datas
of physical block located in new
blkaddr)
- f2fs_submit_page_mbio
(page#1 was submitted, later, page#2
with invalid data will be submitted)
b)
f2fs_gc:
- gc_data_segment
- move_encrypted_block
- f2fs_submit_page_mbio
(page#1 in meta inode's page cache was
queued in f2fs bio cache, and be ready
to write to new blkaddr)
user thread:
- f2fs_write_begin
- f2fs_submit_page_bio
(we submit the request to block layer
to update page#2 in inode's page cache
with physical block located in new
blkaddr, so here we may read gabbage
data from new blkaddr since GC hasn't
writebacked the page#1 yet)
This patch fixes above potential racing problem for encrypted inode.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we have a file that shares an extent with other files, when processing
the extent item relative to a shared extent, we blindly issue a clone
operation that will target a length matching the length in the extent item
and uses as a source some other file the receiver already has and points
to the same extent. However that range in the other file might not
exclusively point only to the shared extent, and so using that length
will result in the receiver getting a file with different data from the
one in the send snapshot. This issue happened both for incremental and
full send operations.
So fix this by issuing clone operations with lengths that don't cover
regions of the source file that point to different extents (or have holes).
The following test case for fstests reproduces the problem.
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -fr $send_files_dir
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
_need_to_be_root
_require_cp_reflink
_require_xfs_io_command "fpunch"
send_files_dir=$TEST_DIR/btrfs-test-$seq
rm -f $seqres.full
rm -fr $send_files_dir
mkdir $send_files_dir
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
# Create our test file with a single 100K extent.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 100K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Clone our file into a new file named bar.
cp --reflink=always $SCRATCH_MNT/foo $SCRATCH_MNT/bar
# Now overwrite parts of our foo file.
$XFS_IO_PROG -c "pwrite -S 0xbb 50K 10K" \
-c "pwrite -S 0xcc 90K 10K" \
-c "fpunch 70K 10k" \
$SCRATCH_MNT/foo | _filter_xfs_io
_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT \
$SCRATCH_MNT/snap
echo "File digests in the original filesystem:"
md5sum $SCRATCH_MNT/snap/foo | _filter_scratch
md5sum $SCRATCH_MNT/snap/bar | _filter_scratch
_run_btrfs_util_prog send $SCRATCH_MNT/snap -f $send_files_dir/1.snap
# Now recreate the filesystem by receiving the send stream and verify
# we get the same file contents that the original filesystem had.
_scratch_unmount
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
_run_btrfs_util_prog receive $SCRATCH_MNT -f $send_files_dir/1.snap
# We expect the destination filesystem to have exactly the same file
# data as the original filesystem.
# The btrfs send implementation had a bug where it sent a clone
# operation from file foo into file bar covering the whole [0, 100K[
# range after creating and writing the file foo. This was incorrect
# because the file bar now included the updates done to file foo after
# we cloned foo to bar, breaking the COW nature of reflink copies
# (cloned extents).
echo "File digests in the new filesystem:"
md5sum $SCRATCH_MNT/snap/foo | _filter_scratch
md5sum $SCRATCH_MNT/snap/bar | _filter_scratch
status=0
exit
Another test case that reproduces the problem when we have compressed
extents:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -fr $send_files_dir
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
_need_to_be_root
_require_cp_reflink
send_files_dir=$TEST_DIR/btrfs-test-$seq
rm -f $seqres.full
rm -fr $send_files_dir
mkdir $send_files_dir
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount "-o compress"
# Create our file with an extent of 100K starting at file offset 0K.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 100K" \
-c "fsync" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Rewrite part of the previous extent (its first 40K) and write a new
# 100K extent starting at file offset 100K.
$XFS_IO_PROG -c "pwrite -S 0xbb 0K 40K" \
-c "pwrite -S 0xcc 100K 100K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Our file foo now has 3 file extent items in its metadata:
#
# 1) One covering the file range 0 to 40K;
# 2) One covering the file range 40K to 100K, which points to the first
# extent we wrote to the file and has a data offset field with value
# 40K (our file no longer uses the first 40K of data from that
# extent);
# 3) One covering the file range 100K to 200K.
# Now clone our file foo into file bar.
cp --reflink=always $SCRATCH_MNT/foo $SCRATCH_MNT/bar
# Create our snapshot for the send operation.
_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT \
$SCRATCH_MNT/snap
echo "File digests in the original filesystem:"
md5sum $SCRATCH_MNT/snap/foo | _filter_scratch
md5sum $SCRATCH_MNT/snap/bar | _filter_scratch
_run_btrfs_util_prog send $SCRATCH_MNT/snap -f $send_files_dir/1.snap
# Now recreate the filesystem by receiving the send stream and verify we
# get the same file contents that the original filesystem had.
# Btrfs send used to issue a clone operation from foo's range
# [80K, 140K[ to bar's range [40K, 100K[ when cloning the extent pointed
# to by foo's second file extent item, this was incorrect because of bad
# accounting of the file extent item's data offset field. The correct
# range to clone from should have been [40K, 100K[.
_scratch_unmount
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount "-o compress"
_run_btrfs_util_prog receive $SCRATCH_MNT -f $send_files_dir/1.snap
echo "File digests in the new filesystem:"
# Must match the digests we got in the original filesystem.
md5sum $SCRATCH_MNT/snap/foo | _filter_scratch
md5sum $SCRATCH_MNT/snap/bar | _filter_scratch
status=0
exit
Signed-off-by: Filipe Manana <fdmanana@suse.com>
After finishing building free nid cache, we will try to readahead
asynchronously 4 more pages for the next reloading, the count of
readahead nid pages is fixed.
In some case, like SMR drive, read less sectors with fixed count
each time we trigger RA may be low efficient, since we will face
high seeking overhead, so we'd better let user to configure this
parameter from sysfs in specific workload.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When there is no free nid in nid cache, all new node allocaters stop their
job to wait for reloading of free nids, however reloading is synchronous as
we will read 4 NAT pages for building nid cache, it cause the long latency.
This patch tries to readahead more NAT pages with READA request flag after
reloading of free nids. It helps to improve performance when users allocate
node id intensively.
Env: Sandisk 32G sd card
time for i in `seq 1 60000`; { echo -n > /mnt/f2fs/$i; echo XXXXXX > /mnt/f2fs/$i;}
Before:
real 0m2.814s
user 0m1.220s
sys 0m1.536s
After:
real 0m2.711s
user 0m1.136s
sys 0m1.568s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now, we use ra_meta_pages to reads continuous physical blocks as much as
possible to improve performance of following reads. However, ra_meta_pages
uses a synchronous readahead approach by submitting bio with READ, as READ
is with high priority, it can not be used in the case of preloading blocks,
and it's not sure when these RAed pages will be used.
This patch supports asynchronous readahead in ra_meta_pages by tagging bio
with READA flag in order to allow preloading.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In recovery or checkpoint flow, we grab pages temperarily in meta inode's
mapping for caching temperary data, actually, datas in these pages were
not meta data of f2fs, but still we tag them with REQ_META flag. However,
lower device like eMMC may do some optimization for data of such type.
So in order to avoid wrong optimization, we'd better remove such flag
for temperary non-meta pages.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a tracepoint for f2fs_read_data_pages to trace when pages
are readahead by VFS.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For normal inodes, their pages are allocated with __GFP_FS, which can cause
filesystem calls when reclaiming memory.
This can incur a dead lock condition accordingly.
So, this patch addresses this problem by introducing
f2fs_grab_cache_page(.., bool for_write), which calls
grab_cache_page_write_begin() with AOP_FLAG_NOFS.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The f2fs_collapse_range and f2fs_insert_range changes the block addresses
directly. But that can cause uncovered SSA updates.
In that case, we need to give up to change the block addresses and do buffered
writes to keep filesystem consistency.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The periodic checkpoint can resolve the previous issue.
So, now we can use this again to improve the reported performance regression:
https://lkml.org/lkml/2015/10/8/20
This reverts commit 15bec0ff5a9ba6d203178fa8772259df6207942a.
This patch introduces F2FS_GOING_DOWN_METAFLUSH which flushes meta pages like
SSA blocks and then blocks all the writes.
This can be used by power-failure tests.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
bdi_for_each_wb() is used in several places to wake up or issue
writeback work items to all wb's (bdi_writeback's) on a given bdi.
The iteration is performed by walking bdi->cgwb_tree; however, the
tree only indexes wb's which are currently active.
For example, when a memcg gets associated with a different blkcg, the
old wb is removed from the tree so that the new one can be indexed.
The old wb starts dying from then on but will linger till all its
inodes are drained. As these dying wb's may still host dirty inodes,
writeback operations which affect all wb's must include them.
bdi_for_each_wb() skipping dying wb's led to sync(2) missing and
failing to sync the inodes belonging to those wb's.
This patch adds a RCU protected @bdi->wb_list which lists all wb's
beloinging to that bdi. wb's are added on creation and removed on
release rather than on the start of destruction. bdi_for_each_wb()
usages are replaced with list_for_each[_continue]_rcu() iterations
over @bdi->wb_list and bdi_for_each_wb() and its helpers are removed.
v2: Updated as per Jan. last_wb ref leak in bdi_split_work_to_wbs()
fixed and unnecessary list head severing in cgwb_bdi_destroy()
removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Artem Bityutskiy <dedekind1@gmail.com>
Fixes: ebe41ab0c7 ("writeback: implement bdi_for_each_wb()")
Link: http://lkml.kernel.org/g/1443012552.19983.209.camel@gmail.com
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
wakeup_dirtytime_writeback() walks and wakes up all wb's of all bdi's;
unfortunately, it was always waking up bdi->wb instead of the wb being
walked. Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 001fe6f617 ("writeback: make wakeup_dirtytime_writeback() handle multiple bdi_writeback's")
Reviewed-by: Jan Kara <jack@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If two overlayfs filesystems are stacked on top of each other, then we need
recursion in ovl_d_select_inode().
I guess d_backing_inode() is supposed to do that. But currently it doesn't
and that functionality is open coded in vfs_open(). This is now copied
into ovl_d_select_inode() to fix this regression.
Reported-by: Alban Crequy <alban.crequy@gmail.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Fixes: 4bacc9c923 ("overlayfs: Make f_path always point to the overlay...")
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org> # v4.2+
In ovl_copy_up_locked(), newdentry is leaked if the function exits through
out_cleanup as this just to out after calling ovl_cleanup() - which doesn't
actually release the ref on newdentry.
The out_cleanup segment should instead exit through out2 as certainly
newdentry leaks - and possibly upper does also, though this isn't caught
given the catch of newdentry.
Without this fix, something like the following is seen:
BUG: Dentry ffff880023e9eb20{i=f861,n=#ffff880023e82d90} still in use (1) [unmount of tmpfs tmpfs]
BUG: Dentry ffff880023ece640{i=0,n=bigfile} still in use (1) [unmount of tmpfs tmpfs]
when unmounting the upper layer after an error occurred in copyup.
An error can be induced by creating a big file in a lower layer with
something like:
dd if=/dev/zero of=/lower/a/bigfile bs=65536 count=1 seek=$((0xf000))
to create a large file (4.1G). Overlay an upper layer that is too small
(on tmpfs might do) and then induce a copy up by opening it writably.
Reported-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org> # v3.18+
Open the lower file with O_LARGEFILE in ovl_copy_up().
Pass O_LARGEFILE unconditionally in ovl_copy_up_data() as it's purely for
catching 32-bit userspace dealing with a file large enough that it'll be
mishandled if the application isn't aware that there might be an integer
overflow. Inside the kernel, there shouldn't be any problems.
Reported-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org> # v3.18+
Leandro Awa writes:
"After switching to version 4.1.6, our parallelized and distributed
workflows now fail consistently with errors of the form:
T34: ./regex.c:39:22: error: config.h: No such file or directory
From our 'git bisect' testing, the following commit appears to be the
possible cause of the behavior we've been seeing: commit 766c4cbfacd8"
Al Viro says:
"What happens is that 766c4cbfac got the things subtly wrong.
We used to treat d_is_negative() after lookup_fast() as "fall with
ENOENT". That was wrong - checking ->d_flags outside of ->d_seq
protection is unreliable and failing with hard error on what should've
fallen back to non-RCU pathname resolution is a bug.
Unfortunately, we'd pulled the test too far up and ran afoul of
another kind of staleness. The dentry might have been absolutely
stable from the RCU point of view (and we might be on UP, etc), but
stale from the remote fs point of view. If ->d_revalidate() returns
"it's actually stale", dentry gets thrown away and the original code
wouldn't even have looked at its ->d_flags.
What we need is to check ->d_flags where 766c4cbfac does (prior to
->d_seq validation) but only use the result in cases where we do not
discard this dentry outright"
Reported-by: Leandro Awa <lawa@nvidia.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=104911
Fixes: 766c4cbfac ("namei: d_is_negative() should be checked...")
Tested-by: Leandro Awa <lawa@nvidia.com>
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Removing barriers is scary, but a call to atomic_dec_and_test implies
a barrier, so we don't need to issue another one.
Signed-off-by: David Sterba <dsterba@suse.com>
waitqueue_active should be preceded by a barrier, in this function we
don't need to call it all the time.
Signed-off-by: David Sterba <dsterba@suse.com>
Normally the waitqueue_active would need a barrier, but this is not
necessary here because it's not a performance sensitive context and we
can call wake_up directly.
Suggested-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"These are small and assorted. Neil's is the oldest, I dropped the
ball thinking he was going to send it in"
* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: support NFSv2 export
Btrfs: open_ctree: Fix possible memory leak
Btrfs: fix deadlock when finalizing block group creation
Btrfs: update fix for read corruption of compressed and shared extents
Btrfs: send, fix corner case for reference overwrite detection
This patch introduces a periodic checkpoint feature.
Note that, this is not enforcing to conduct checkpoints very strictly in terms
of trigger timing, instead just hope to help user experiences.
The default value is 60 seconds.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a tracepoint to monitor background gc behaviors.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduce a new ioctl for those users who want to trigger
checkpoint from userspace through ioctl.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch drops in batches gc triggered through ioctl, since user
can easily control the gc by designing the loop around the ->ioctl.
We support synchronous gc by forcing using FG_GC in f2fs_gc, so with
it, user can make sure that in this round all blocks gced were
persistent in the device until ioctl returned.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When searching victim during gc, if there are no dirty segments in
filesystem, we will still take the time to search the whole dirty segment
map, it's not needed, it's better to skip in this condition.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When doing gc, we search a victim in dirty map, starting from position of
last victim, we will reset the current searching position until we touch
the end of dirty map, and then search the whole diryt map. So sometimes we
will search the range [victim, last] twice, it's redundant, this patch
avoids this issue.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Our hit stat of extent cache will increase all the time until remount,
and we use atomic_t type for the stat variable, so it may easily incur
overflow when we query extent cache frequently in a long time running
fs.
So to avoid that, this patch uses atomic64_t for hit stat variables.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we do not call get_victim first, we cannot get a new victim for retrial
path.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to maintain the right section count freed in garbage
collecting when triggering a foreground gc.
Besides, when a foreground gc is running on current selected section, once
we fail to gc one segment, it's better to abandon gcing the left segments
in current section, because anyway we will select next victim for
foreground gc, so gc on the left segments in previous section will become
overhead and also cause the long latency for caller.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to update ctime and atime correctly when truncating
larger in ->setattr.
The bug is reported by xfstest generic/313 as below:
generic/313 2s ... - output mismatch (see ./results/generic/313.out.bad)
--- tests/generic/313.out 2015-08-04 15:28:53.430798882 +0800
+++ results/generic/313.out.bad 2015-09-28 17:04:27.294278016 +0800
@@ -1,2 +1,4 @@
QA output created by 313
Silence is golden
+ctime not updated after truncate up
+mtime not updated after truncate up
...
(Run 'diff -u tests/generic/313.out tests/generic/313.out.bad' to see the entire diff)
Ran: generic/313
Failures: generic/313
Failed 1 of 1 tests
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, we skip dentry block writes when wbc is SYNC_NONE with no memory
pressure and the number of dirty pages is pretty small.
But, we didn't skip for normal data writes, which gives us not much big impact
on overall performance.
Moreover, by skipping some data writes, kworker falls into infinite loop to try
to write blocks, when many dir inodes have only one dentry block.
So, this patch removes skipping data writes.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Protecting recovery flow by using cp_rwsem is not needed, since we have
prevent triggering any checkpoint by locking cp_mutex previously.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In update_sit_info, we use div_u64 to handle 'u64 divide u64' case, but
div_u64 can only handle 32-bits divisor, so our divisor with u64 type
passed to div_u64 will overflow, result in the wrong calculation when
show debug info of f2fs as below:
BDF: 464, avg. vblocks: 23509
(BDF should never exceed 100)
So change to use div64_u64 to handle this case correctly.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a new helper __try_update_largest_extent for cleanup.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This fixes error handling for calls to various functions in the
function recover_inline_data to check if these particular functions
either return a error code or the boolean value false to signal their
caller they have failed internally and if this arises return false
to signal failure immediately to the caller of recover_inline_data
as we cannot continue after failures to calling either the function
truncate_inline_inode or truncate_blocks.
Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Swith extent_cache option dynamically when remount may casue consistency
issue between extent cache and dnode page. Fix in this patch to avoid
that condition.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We introduce F2FS_GET_BLOCK_READ in commit e2b4e2bc88 ("f2fs: fix
incorrect mapping for bmap"), but forget to use this flag in the right
place, fix it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
truncate_data_blocks_range can do in batches truncation which makes all
changes in dnode page content, dnode page status, extent cache, block
count updating together.
But previously, truncate_hole() always truncates one block in dnode page
at a time by invoking truncate_data_blocks_range(,1), which make thing
slow.
This patch changes truncate_hole() to do in batches truncation for all
target blocks in one direct node inside truncate_data_blocks_range, which
can make our punch hole operation in ->fallocate more efficent.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fix 2 potential problems:
1. when largest extent needs to be invalidated, it will be reset in
__drop_largest_extent, which makes __is_extent_same after always
return false, and largest extent unchanged. Now we update it properly.
2. when extent is split and the latter part remains in tree, next_en
should be the latter part instead of next extent of original extent.
It will cause merge failure if there is in-place update, although
there is not, I think this fix will still makes codes less ambiguous.
This patch also simplifies codes of invalidating extents, and optimizes the
procedues that split extent into two.
There are a few modifications after last patch:
1. prev_en now is updated properly.
2. more codes and branches are simplified.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
now we update extent by range, fofs may not be on the largest
extent if the new extent overlaps with it. so add a new function
to drop largest extent properly.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch avoids to produce new checkpoint blocks before the previous meta
pages were written completely.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We got dentry pages from high_mem, and its address space directly goes into the
decryption path via f2fs_fname_disk_to_usr.
But, sg_init_one assumes the address is not from high_mem, so we can get this
panic since it doesn't call kmap_high but kunmap_high is triggered at the end.
kernel BUG at ../../../../../../kernel/mm/highmem.c:290!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
...
(kunmap_high+0xb0/0xb8) from [<c0114534>] (__kunmap_atomic+0xa0/0xa4)
(__kunmap_atomic+0xa0/0xa4) from [<c035f028>] (blkcipher_walk_done+0x128/0x1ec)
(blkcipher_walk_done+0x128/0x1ec) from [<c0366c24>] (crypto_cbc_decrypt+0xc0/0x170)
(crypto_cbc_decrypt+0xc0/0x170) from [<c0367148>] (crypto_cts_decrypt+0xc0/0x114)
(crypto_cts_decrypt+0xc0/0x114) from [<c035ea98>] (async_decrypt+0x40/0x48)
(async_decrypt+0x40/0x48) from [<c032ca34>] (f2fs_fname_disk_to_usr+0x124/0x304)
(f2fs_fname_disk_to_usr+0x124/0x304) from [<c03056fc>] (f2fs_fill_dentries+0xac/0x188)
(f2fs_fill_dentries+0xac/0x188) from [<c03059c8>] (f2fs_readdir+0x1f0/0x300)
(f2fs_readdir+0x1f0/0x300) from [<c0218054>] (vfs_readdir+0x90/0xb4)
(vfs_readdir+0x90/0xb4) from [<c0218418>] (SyS_getdents64+0x64/0xcc)
(SyS_getdents64+0x64/0xcc) from [<c0105ba0>] (ret_fast_syscall+0x0/0x30)
Cc: <stable@vger.kernel.org>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this patch, we try to reorganize f2fs_map_blocks to make block mapping
flow more clear by using following structure:
/* check status of mapping */
if (unmapped) {
/* blkaddr == NULL_ADDR || blkaddr == NEW_ADDR */
if (create) {
/* write path, handle dio write case here */
alloc_and_map;
} else {
/*
* handle read cases from all call paths:
* 1. generic read;
* 2. dio read;
* 3. fiemap;
* 4. bmap
*/
}
}
/* map buffer_header */
Besides, this patch handles the missing case correctly for dio write:
When we fail in __allocate_data_blocks, then in f2fs_map_blocks, we will
not allocate blocks correctly for preallocated blocks, but returning with
an unmapped buffer head, which will result in failure of dio write.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We have potential overflow issue when calculating size of object, when
we left shift index with PAGE_CACHE_SHIFT bits, if type of index has only
32-bits space in 32-bit architecture, left shifting will incur overflow,
i.e:
pgoff_t index = 0xFFFFFFFF;
loff_t size = index << PAGE_CACHE_SHIFT;
size: 0xFFFFF000
So we should cast index with 64-bits type to avoid this issue.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When shrinking extent cache, we have two steps in the flow:
1) shrink objects which are unreferenced by inodes;
2) shrink objects from LRU list of extent cache.
In step 1, if we haven't shrunk enough number of objects, we will try
step 2, but before that we didn't update the searching position which
may point to last inode index in global extent tree, result in failing
to shrink objects by traversing the all inodes' extent tree.
In this patch, we reset searching position to beginning of global extent
tree for fixing.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch changes to verify file type early in f2fs_fallocate for
cleanup, meanwhile this also fixes to add missing verification for
expand_inode_data.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As comment says, we don't need to call f2fs_lock_op in write_inode to prevent
from producing dirty node pages all the time.
That happens only when there is not enough free sections and we can avoid that
by calling balance_fs in prior to that.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This number is referenced by checkpoint under node_write lock.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This fixes the incorrect return statement at the end of the function
f2fs_ioc_release_volatile_write's body for returning zero as this is
incorrect due to the function call before this return statement to
the function punch_hole being able to fail and we should return this
function's return fail directly in order to signal to callers of the
function f2fs_ioc_release_volatile if a failure arises with this call
to punch_hole fails.
Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Rename trace_f2fs_update_extent_tree to trace_f2fs_update_extent_tree_range,
then expand and enable it to trace in batches extent info updates.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Recent Linux clients have started to send GETLAYOUT requests with
minlength less than blocksize.
Servers aren't really allowed to impose this kind of restriction on
layouts; see RFC 5661 section 18.43.3 for details.
This has been observed to cause indefinite hangs on fsx runs on some
clients.
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWEUxnAAoJEHm+PkMAQRiGYCYH/3gtGkFdvSLi+E1PfI8Qk3ZA
XuYA4Mj09JBVSmaICeueMTDVrdiq0OE0zPib26GWlF/za13kNU8KgMR3+6XCuLSX
DiCmh6mwDItoNoSIIUERLqrFHABXz8rZ3gb3uu2+kNN74Cl0piNm1YpFclEEWjMr
9Wk5fkq+ontnDVUQOvWUxPiUXOJTvdLXBWTRDw1yTdE3RMNwRI2d/hme6Hq++WYV
tRalZZKQaoB33js9WRVAoLVunvtna+i+/y7VGLj8QyS0+d6ec81Hey2r1/fR/oG4
bs4ul6vtqeb3IR/PjUqxF59pSrCLEO+qrp9KrTlJNYgr1m1QyjRxWUdy/XhyaWo=
=gIhN
-----END PGP SIGNATURE-----
Merge tag 'v4.3-rc4' into for-4.4/core
Linux 4.3-rc4
Pulling in v4.3-rc4 to avoid conflicts with NVMe fixes that have gone
in since for-4.4/core was based.
For symmetry with the synchronous handler, and so that we can potentially
handle errors such as NFS4ERR_BADNAME.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Convert the simple cases, not all functions provide a way to reach the
fs_info. Also skipped debugging messages (print-tree, integrity
checker and pr_debug) and messages that are printed from possibly
unfinished mount.
Signed-off-by: David Sterba <dsterba@suse.com>
Due to the missing variants there are messages that lack the information
printed by btrfs_info etc helpers.
Signed-off-by: David Sterba <dsterba@suse.com>
Highlights include:
Bugfixes:
- Fix a use-after-free bug in the RPC/RDMA client
- Fix a write performance regression
- Fix up page writeback accounting
- Don't try to reclaim unused state owners
- Fix a NFSv4 nograce recovery hang
- reset states to use open_stateid when returning delegation voluntarily
- Fix a tracepoint NULL-pointer dereference
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aoNS
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Bugfixes:
- Fix a use-after-free bug in the RPC/RDMA client
- Fix a write performance regression
- Fix up page writeback accounting
- Don't try to reclaim unused state owners
- Fix a NFSv4 nograce recovery hang
- reset states to use open_stateid when returning delegation
voluntarily
- Fix a tracepoint NULL-pointer dereference"
* tag 'nfs-for-4.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix a tracepoint NULL-pointer dereference
nfs4: reset states to use open_stateid when returning delegation voluntarily
NFSv4: Fix a nograce recovery hang
NFSv4.1: nfs4_opendata_check_deleg needs to handle NFS4_OPEN_CLAIM_DELEG_CUR_FH
NFSv4: Don't try to reclaim unused state owners
NFS: Fix a write performance regression
NFS: Fix up page writeback accounting
xprtrdma: disconnect and flush cqs before freeing buffers
Running xfstest generic/013 with the tracepoint nfs:nfs4_open_file
enabled produces a NULL-pointer dereference when calculating fileid and
filehandle of the opened file. Fix this by checking if state is NULL
before trying to use the inode pointer.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The "fh_len" passed to ->fh_to_* is not guaranteed to be that same as
that returned by encode_fh - it may be larger.
With NFSv2, the filehandle is fixed length, so it may appear longer
than expected and be zero-padded.
So we must test that fh_len is at least some value, not exactly equal
to it.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: David Sterba <dsterba@suse.cz>
After reading one of chunk or tree root tree's root node from disk, if the
root node does not have EXTENT_BUFFER_UPTODATE flag set, we fail to release
the memory used by the root node. Fix this.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Pull CIFS fixes from Steve French:
"Two fixes for problems pointed out by automated tools.
Thanks PaX/grsecurity team and Dan Carpenter (and the Smatch tool)"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
[CIFS] Update cifs version number
[SMB3] Do not fall back to SMBWriteX in set_file_size error cases
[SMB3] Missing null tcon check
Josef ran into a deadlock while a transaction handle was finalizing the
creation of its block groups, which produced the following trace:
[260445.593112] fio D ffff88022a9df468 0 8924 4518 0x00000084
[260445.593119] ffff88022a9df468 ffffffff81c134c0 ffff880429693c00 ffff88022a9df488
[260445.593126] ffff88022a9e0000 ffff8803490d7b00 ffff8803490d7b18 ffff88022a9df4b0
[260445.593132] ffff8803490d7af8 ffff88022a9df488 ffffffff8175a437 ffff8803490d7b00
[260445.593137] Call Trace:
[260445.593145] [<ffffffff8175a437>] schedule+0x37/0x80
[260445.593189] [<ffffffffa0850f37>] btrfs_tree_lock+0xa7/0x1f0 [btrfs]
[260445.593197] [<ffffffff810db7c0>] ? prepare_to_wait_event+0xf0/0xf0
[260445.593225] [<ffffffffa07eac44>] btrfs_lock_root_node+0x34/0x50 [btrfs]
[260445.593253] [<ffffffffa07eff6b>] btrfs_search_slot+0x88b/0xa00 [btrfs]
[260445.593295] [<ffffffffa08389df>] ? free_extent_buffer+0x4f/0x90 [btrfs]
[260445.593324] [<ffffffffa07f1a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs]
[260445.593351] [<ffffffffa07ea94a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs]
[260445.593394] [<ffffffffa08403b9>] btrfs_finish_chunk_alloc+0x1c9/0x570 [btrfs]
[260445.593427] [<ffffffffa08002ab>] btrfs_create_pending_block_groups+0x11b/0x200 [btrfs]
[260445.593459] [<ffffffffa0800964>] do_chunk_alloc+0x2a4/0x2e0 [btrfs]
[260445.593491] [<ffffffffa0803815>] find_free_extent+0xa55/0xd90 [btrfs]
[260445.593524] [<ffffffffa0803c22>] btrfs_reserve_extent+0xd2/0x220 [btrfs]
[260445.593532] [<ffffffff8119fe5d>] ? account_page_dirtied+0xdd/0x170
[260445.593564] [<ffffffffa0803e78>] btrfs_alloc_tree_block+0x108/0x4a0 [btrfs]
[260445.593597] [<ffffffffa080c9de>] ? btree_set_page_dirty+0xe/0x10 [btrfs]
[260445.593626] [<ffffffffa07eb5cd>] __btrfs_cow_block+0x12d/0x5b0 [btrfs]
[260445.593654] [<ffffffffa07ebbff>] btrfs_cow_block+0x11f/0x1c0 [btrfs]
[260445.593682] [<ffffffffa07ef8c7>] btrfs_search_slot+0x1e7/0xa00 [btrfs]
[260445.593724] [<ffffffffa08389df>] ? free_extent_buffer+0x4f/0x90 [btrfs]
[260445.593752] [<ffffffffa07f1a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs]
[260445.593830] [<ffffffffa07ea94a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs]
[260445.593905] [<ffffffffa08403b9>] btrfs_finish_chunk_alloc+0x1c9/0x570 [btrfs]
[260445.593946] [<ffffffffa08002ab>] btrfs_create_pending_block_groups+0x11b/0x200 [btrfs]
[260445.593990] [<ffffffffa0815798>] btrfs_commit_transaction+0xa8/0xb40 [btrfs]
[260445.594042] [<ffffffffa085abcd>] ? btrfs_log_dentry_safe+0x6d/0x80 [btrfs]
[260445.594089] [<ffffffffa082bc84>] btrfs_sync_file+0x294/0x350 [btrfs]
[260445.594115] [<ffffffff8123e29b>] vfs_fsync_range+0x3b/0xa0
[260445.594133] [<ffffffff81023891>] ? syscall_trace_enter_phase1+0x131/0x180
[260445.594149] [<ffffffff8123e35d>] do_fsync+0x3d/0x70
[260445.594169] [<ffffffff81023bb8>] ? syscall_trace_leave+0xb8/0x110
[260445.594187] [<ffffffff8123e600>] SyS_fsync+0x10/0x20
[260445.594204] [<ffffffff8175de6e>] entry_SYSCALL_64_fastpath+0x12/0x71
This happened because the same transaction handle created a large number
of block groups and while finalizing their creation (inserting new items
and updating existing items in the chunk and device trees) a new metadata
extent had to be allocated and no free space was found in the current
metadata block groups, which made find_free_extent() attempt to allocate
a new block group via do_chunk_alloc(). However at do_chunk_alloc() we
ended up allocating a new system chunk too and exceeded the threshold
of 2Mb of reserved chunk bytes, which makes do_chunk_alloc() enter the
final part of block group creation again (at
btrfs_create_pending_block_groups()) and attempt to lock again the root
of the chunk tree when it's already write locked by the same task.
Similarly we can deadlock on extent tree nodes/leafs if while we are
running delayed references we end up creating a new metadata block group
in order to allocate a new node/leaf for the extent tree (as part of
a CoW operation or growing the tree), as btrfs_create_pending_block_groups
inserts items into the extent tree as well. In this case we get the
following trace:
[14242.773581] fio D ffff880428ca3418 0 3615 3100 0x00000084
[14242.773588] ffff880428ca3418 ffff88042d66b000 ffff88042a03c800 ffff880428ca3438
[14242.773594] ffff880428ca4000 ffff8803e4b20190 ffff8803e4b201a8 ffff880428ca3460
[14242.773600] ffff8803e4b20188 ffff880428ca3438 ffffffff8175a437 ffff8803e4b20190
[14242.773606] Call Trace:
[14242.773613] [<ffffffff8175a437>] schedule+0x37/0x80
[14242.773656] [<ffffffffa057ff07>] btrfs_tree_lock+0xa7/0x1f0 [btrfs]
[14242.773664] [<ffffffff810db7c0>] ? prepare_to_wait_event+0xf0/0xf0
[14242.773692] [<ffffffffa0519c44>] btrfs_lock_root_node+0x34/0x50 [btrfs]
[14242.773720] [<ffffffffa051ef6b>] btrfs_search_slot+0x88b/0xa00 [btrfs]
[14242.773750] [<ffffffffa0520a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs]
[14242.773758] [<ffffffff811ef4a2>] ? kmem_cache_alloc+0x1d2/0x200
[14242.773786] [<ffffffffa0520ad1>] btrfs_insert_item+0x71/0xf0 [btrfs]
[14242.773818] [<ffffffffa052f292>] btrfs_create_pending_block_groups+0x102/0x200 [btrfs]
[14242.773850] [<ffffffffa052f96e>] do_chunk_alloc+0x2ae/0x2f0 [btrfs]
[14242.773934] [<ffffffffa0532825>] find_free_extent+0xa55/0xd90 [btrfs]
[14242.773998] [<ffffffffa0532c22>] btrfs_reserve_extent+0xc2/0x1d0 [btrfs]
[14242.774041] [<ffffffffa0532e38>] btrfs_alloc_tree_block+0x108/0x4a0 [btrfs]
[14242.774078] [<ffffffffa051a5cd>] __btrfs_cow_block+0x12d/0x5b0 [btrfs]
[14242.774118] [<ffffffffa051abff>] btrfs_cow_block+0x11f/0x1c0 [btrfs]
[14242.774155] [<ffffffffa051e8c7>] btrfs_search_slot+0x1e7/0xa00 [btrfs]
[14242.774194] [<ffffffffa0528021>] ? __btrfs_free_extent.isra.70+0x2e1/0xcb0 [btrfs]
[14242.774235] [<ffffffffa0520a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs]
[14242.774274] [<ffffffffa051994a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs]
[14242.774318] [<ffffffffa052c433>] __btrfs_run_delayed_refs+0xbb3/0x1020 [btrfs]
[14242.774358] [<ffffffffa052f404>] btrfs_run_delayed_refs.part.78+0x74/0x280 [btrfs]
[14242.774391] [<ffffffffa052f627>] btrfs_run_delayed_refs+0x17/0x20 [btrfs]
[14242.774432] [<ffffffffa05be236>] commit_cowonly_roots+0x8d/0x2bd [btrfs]
[14242.774474] [<ffffffffa059d07f>] ? __btrfs_run_delayed_items+0x1cf/0x210 [btrfs]
[14242.774516] [<ffffffffa05adac3>] ? btrfs_qgroup_account_extents+0x83/0x130 [btrfs]
[14242.774558] [<ffffffffa0544c40>] btrfs_commit_transaction+0x590/0xb40 [btrfs]
[14242.774599] [<ffffffffa0589b9d>] ? btrfs_log_dentry_safe+0x6d/0x80 [btrfs]
[14242.774642] [<ffffffffa055ac54>] btrfs_sync_file+0x294/0x350 [btrfs]
[14242.774650] [<ffffffff8123e29b>] vfs_fsync_range+0x3b/0xa0
[14242.774657] [<ffffffff81023891>] ? syscall_trace_enter_phase1+0x131/0x180
[14242.774663] [<ffffffff8123e35d>] do_fsync+0x3d/0x70
[14242.774669] [<ffffffff81023bb8>] ? syscall_trace_leave+0xb8/0x110
[14242.774675] [<ffffffff8123e600>] SyS_fsync+0x10/0x20
[14242.774681] [<ffffffff8175de6e>] entry_SYSCALL_64_fastpath+0x12/0x71
Fix this by never recursing into the finalization phase of block group
creation and making sure we never trigger the finalization of block group
creation while running delayed references.
Reported-by: Josef Bacik <jbacik@fb.com>
Fixes: 00d80e342c ("Btrfs: fix quick exhaustion of the system array in the superblock")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
My previous fix in commit 005efedf2c ("Btrfs: fix read corruption of
compressed and shared extents") was effective only if the compressed
extents cover a file range with a length that is not a multiple of 16
pages. That's because the detection of when we reached a different range
of the file that shares the same compressed extent as the previously
processed range was done at extent_io.c:__do_contiguous_readpages(),
which covers subranges with a length up to 16 pages, because
extent_readpages() groups the pages in clusters no larger than 16 pages.
So fix this by tracking the start of the previously processed file
range's extent map at extent_readpages().
The following test case for fstests reproduces the issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_cloner
rm -f $seqres.full
test_clone_and_read_compressed_extent()
{
local mount_opts=$1
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount $mount_opts
# Create our test file with a single extent of 64Kb that is going to
# be compressed no matter which compression algo is used (zlib/lzo).
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 64K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Now clone the compressed extent into an adjacent file offset.
$CLONER_PROG -s 0 -d $((64 * 1024)) -l $((64 * 1024)) \
$SCRATCH_MNT/foo $SCRATCH_MNT/foo
echo "File digest before unmount:"
md5sum $SCRATCH_MNT/foo | _filter_scratch
# Remount the fs or clear the page cache to trigger the bug in
# btrfs. Because the extent has an uncompressed length that is a
# multiple of 16 pages, all the pages belonging to the second range
# of the file (64K to 128K), which points to the same extent as the
# first range (0K to 64K), had their contents full of zeroes instead
# of the byte 0xaa. This was a bug exclusively in the read path of
# compressed extents, the correct data was stored on disk, btrfs
# just failed to fill in the pages correctly.
_scratch_remount
echo "File digest after remount:"
# Must match the digest we got before.
md5sum $SCRATCH_MNT/foo | _filter_scratch
}
echo -e "\nTesting with zlib compression..."
test_clone_and_read_compressed_extent "-o compress=zlib"
_scratch_unmount
echo -e "\nTesting with lzo compression..."
test_clone_and_read_compressed_extent "-o compress=lzo"
status=0
exit
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Timofey Titovets <nefelim4ag@gmail.com>
When the inode given to did_overwrite_ref() matches the current progress
and has a reference that collides with the reference of other inode that
has the same number as the current progress, we were always telling our
caller that the inode's reference was overwritten, which is incorrect
because the other inode might be a new inode (different generation number)
in which case we must return false from did_overwrite_ref() so that its
callers don't use an orphanized path for the inode (as it will never be
orphanized, instead it will be unlinked and the new inode created later).
The following test case for fstests reproduces the issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -fr $send_files_dir
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
_need_to_be_root
send_files_dir=$TEST_DIR/btrfs-test-$seq
rm -f $seqres.full
rm -fr $send_files_dir
mkdir $send_files_dir
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
# Create our test file with a single extent of 64K.
mkdir -p $SCRATCH_MNT/foo
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0 64K" $SCRATCH_MNT/foo/bar \
| _filter_xfs_io
_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT \
$SCRATCH_MNT/mysnap1
_run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT \
$SCRATCH_MNT/mysnap2
echo "File digest before being replaced:"
md5sum $SCRATCH_MNT/mysnap1/foo/bar | _filter_scratch
# Remove the file and then create a new one in the same location with
# the same name but with different content. This new file ends up
# getting the same inode number as the previous one, because that inode
# number was the highest inode number used by the snapshot's root and
# therefore when attempting to find the a new inode number for the new
# file, we end up reusing the same inode number. This happens because
# currently btrfs uses the highest inode number summed by 1 for the
# first inode created once a snapshot's root is loaded (done at
# fs/btrfs/inode-map.c:btrfs_find_free_objectid in the linux kernel
# tree).
# Having these two different files in the snapshots with the same inode
# number (but different generation numbers) caused the btrfs send code
# to emit an incorrect path for the file when issuing an unlink
# operation because it failed to realize they were different files.
rm -f $SCRATCH_MNT/mysnap2/foo/bar
$XFS_IO_PROG -f -c "pwrite -S 0xbb 0 96K" \
$SCRATCH_MNT/mysnap2/foo/bar | _filter_xfs_io
_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT/mysnap2 \
$SCRATCH_MNT/mysnap2_ro
_run_btrfs_util_prog send $SCRATCH_MNT/mysnap1 -f $send_files_dir/1.snap
_run_btrfs_util_prog send -p $SCRATCH_MNT/mysnap1 \
$SCRATCH_MNT/mysnap2_ro -f $send_files_dir/2.snap
echo "File digest in the original filesystem after being replaced:"
md5sum $SCRATCH_MNT/mysnap2_ro/foo/bar | _filter_scratch
# Now recreate the filesystem by receiving both send streams and verify
# we get the same file contents that the original filesystem had.
_scratch_unmount
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
_run_btrfs_util_prog receive -vv $SCRATCH_MNT -f $send_files_dir/1.snap
_run_btrfs_util_prog receive -vv $SCRATCH_MNT -f $send_files_dir/2.snap
echo "File digest in the new filesystem:"
# Must match the digest from the new file.
md5sum $SCRATCH_MNT/mysnap2_ro/foo/bar | _filter_scratch
status=0
exit
Reported-by: Martin Raiber <martin@urbackup.org>
Fixes: 8b191a6849 ("Btrfs: incremental send, check if orphanized dir inode needs delayed rename")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Need to free the memory allocated for 'fd' if failed to read all
of the remainder name.
Signed-off-by: Wei Fang <fangwei1@huawei.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
attributes declared with __ATTR_PREALLOC use sysfs_kf_read()
which ignores the 'count' arg.
So a 1-byte read request can return more bytes than that.
This is seen with the 'dash' shell when 'read' is used on
some 'md' sysfs attributes.
So only return the 'min' of count and the attribute length.
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to commit a59d6293e5 ("debugfs: change parameter check in
debugfs_remove() functions"), this is meant to make cleanup easier for
callers. In that case it ought to be documented.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Its a bit odd that debugfs_create_bool() takes 'u32 *' as an argument,
when all it needs is a boolean pointer.
It would be better to update this API to make it accept 'bool *'
instead, as that will make it more consistent and often more convenient.
Over that bool takes just a byte.
That required updates to all user sites as well, in the same commit
updating the API. regmap core was also using
debugfs_{read|write}_file_bool(), directly and variable types were
updated for that to be bool as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a trivial fix of showing verbose message when leb-recovery detects
a corrupted node, which is not the last one in the LEB. Rescan expects to
show more detail of the corrupted node.
Reviewed-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Call dbg_is_power_cut() to emulate power cut instead of reading
c->dbg->pc_happened. Otherwise, the function becomes dead code.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The patch was generated using fixed coccinelle semantic patch
scripts/coccinelle/api/memdup.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2014320
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Fix multiple bugs in ext4_encrypted_zeroout(), including one that
could cause us to write an encrypted zero page to the wrong location
on disk, potentially causing data and file system corruption.
Fortunately, this tends to only show up in stress tests, but even with
these fixes, we are seeing some test failures with generic/127 --- but
these are now caused by data failures instead of metadata corruption.
Since ext4_encrypted_zeroout() is only used for some optimizations to
keep the extent tree from being too fragmented, and
ext4_encrypted_zeroout() itself isn't all that optimized from a time
or IOPS perspective, disable the extent tree optimization for
encrypted inodes for now. This prevents the data corruption issues
reported by generic/127 until we can figure out what's going wrong.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Since ext4_page_crypto() doesn't need an encryption context (at least
not any more), this allows us to simplify a number function signature
and also allows us to avoid needing to allocate a context in
ext4_block_write_begin(). It also means we no longer need a separate
ext4_decrypt_one() function.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In cases where the file system block size is the same as the page
size, and ext4_writepage() is asked to write out a page which is
either has the unwritten bit set in the extent tree, or which does not
yet have a block assigned due to delayed allocation, we can bail out
early and, unlocking the page earlier and avoiding a round trip
through ext4_bio_write_page() with the attendant calls to
set_page_writeback() and redirty_page_for_writeback().
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There are times when ext4_bio_write_page() is called even though we
don't actually need to do any I/O. This happens when ext4_writepage()
gets called by the jbd2 commit path when an inode needs to force its
pages written out in order to provide data=ordered guarantees --- and
a page is backed by an unwritten (e.g., uninitialized) block on disk,
or if delayed allocation means the page's backing store hasn't been
allocated yet. In that case, we need to skip the call to
ext4_encrypt_page(), since in addition to wasting CPU, it leads to a
bounce page and an ext4 crypto context getting leaked.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
When the client goes to return a delegation, it should always update any
nfs4_state currently set up to use that delegation stateid to instead
use the open stateid. It already does do this in some cases,
particularly in the state recovery code, but not currently when the
delegation is voluntarily returned (e.g. in advance of a RENAME). This
causes the client to try to continue using the delegation stateid after
the DELEGRETURN, e.g. in LAYOUTGET.
Set the nfs4_state back to using the open stateid in
nfs4_open_delegation_recall, just before clearing the
NFS_DELEGATED_STATE bit.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Since commit 5cae02f427 an OPEN_CONFIRM should
have a privileged sequence in the recovery case to allow nograce recovery to
proceed for NFSv4.0.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We need to warn against broken NFSv4.1 servers that try to hand out
delegations in response to NFS4_OPEN_CLAIM_DELEG_CUR_FH.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Currently, we don't test if the state owner is in use before we try to
recover it. The problem is that if the refcount is zero, then the
state owner will be waiting on the lru list for garbage collection.
The expectation in that case is that if you bump the refcount, then
you must also remove the state owner from the lru list. Otherwise
the call to nfs4_put_state_owner will corrupt that list by trying
to add our state owner a second time.
Avoid the whole problem by just skipping state owners that hold no
state.
Reported-by: Andrew W Elble <aweits@rit.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If all other conditions in nfs_can_extend_write() are met, and there
are no locks, then we should be able to assume close-to-open semantics
and the ability to extend our write to cover the whole page.
With this patch, the xfstests generic/074 test completes in 242s instead
of >1400s on my test rig.
Fixes: bd61e0a9c8 ("locks: convert posix locks to file_lock_context")
Cc: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Currently, we are crediting all the calls to nfs_writepages_callback()
(i.e. the nfs_writepages() callback) to nfs_writepage(). Aside from
being inconsistent with the behaviour of the equivalent readpage/readpages
accounting, this also means that we cannot distinguish between bulk writes
and single page writebacks (which confuses the 'nfsiostat -p' tool).
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The error paths in set_file_size for cifs and smb3 are incorrect.
In the unlikely event that a server did not support set file info
of the file size, the code incorrectly falls back to trying SMBWriteX
(note that only the original core SMB Write, used for example by DOS,
can set the file size this way - this actually does not work for the more
recent SMBWriteX). The idea was since the old DOS SMB Write could set
the file size if you write zero bytes at that offset then use that if
server rejects the normal set file info call.
Fortunately the SMBWriteX will never be sent on the wire (except when
file size is zero) since the length and offset fields were reversed
in the two places in this function that call SMBWriteX causing
the fall back path to return an error. It is also important to never call
an SMB request from an SMB2/sMB3 session (which theoretically would
be possible, and can cause a brief session drop, although the client
recovers) so this should be fixed. In practice this path does not happen
with modern servers but the error fall back to SMBWriteX is clearly wrong.
Removing the calls to SMBWriteX in the error paths in cifs_set_file_size
Pointed out by PaX/grsecurity team
Signed-off-by: Steve French <steve.french@primarydata.com>
Reported-by: PaX Team <pageexec@freemail.hu>
CC: Emese Revfy <re.emese@gmail.com>
CC: Brad Spengler <spender@grsecurity.net>
CC: Stable <stable@vger.kernel.org>
Commit 46c043ede4 ("mm: take i_mmap_lock in unmap_mapping_range() for
DAX") moved some code in __dax_pmd_fault() that was responsible for
zeroing newly allocated PMD pages. The new location didn't properly set
up 'kaddr', so when run this code resulted in a NULL pointer BUG.
Fix this by getting the correct 'kaddr' via bdev_direct_access().
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes a timing window that causes a segfault.
The problem is that bd can remain NULL throughout the function
and then reference that NULL pointer if the bh->b_private starts
out NULL, then someone sets it to non-NULL inside the locking.
In that case, bd still needs to be set.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
To avoid deadlock described in commit 084b6e7c76 ("btrfs: Fix a
lockdep warning when running xfstest."), we should move kobj stuff out
of dev_replace lock range.
"It is because the btrfs_kobj_{add/rm}_device() will call memory
allocation with GFP_KERNEL,
which may flush fs page cache to free space, waiting for it self to do
the commit, causing the deadlock.
To solve the problem, move btrfs_kobj_{add/rm}_device() out of the
dev_replace lock range, also involing split the
btrfs_rm_dev_replace_srcdev() function into remove and free parts.
Now only btrfs_rm_dev_replace_remove_srcdev() is called in dev_replace
lock range, and kobj_{add/rm} and btrfs_rm_dev_replace_free_srcdev() are
called out of the lock range."
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[added lockup description]
Signed-off-by: David Sterba <dsterba@suse.com>
Originally the message was not in a helper but ended up there. We should
print error messages from callers instead.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[reworded subject and changelog]
Signed-off-by: David Sterba <dsterba@suse.com>
By general rule of thumb there shouldn't be any way that user land
could trigger a kernel operation just by sending wrong arguments.
Here do commit cleanups after user input has been verified.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch updates and renames btrfs_scratch_superblocks, (which is used
by the replace device thread), with those fixes from the scratch
superblock code section of btrfs_rm_device(). The fixes are:
Scratch all copies of superblock
Notify kobject that superblock has been changed
Update time on the device
So that btrfs_rm_device() can use the function
btrfs_scratch_superblocks() instead of its own scratch code. And further
replace deivce code which similarly releases device back to the system,
will have the fixes from the btrfs device delete.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[renamed to btrfs_scratch_superblock]
Signed-off-by: David Sterba <dsterba@suse.com>
This uses a chunk of code from btrfs_read_dev_super() and creates
a function called btrfs_read_dev_one_super() so that next patch
can use it for scratch superblock.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[renamed bufhead to bh]
Signed-off-by: David Sterba <dsterba@suse.com>
Use btrfs specific error code BTRFS_ERROR_DEV_MISSING_NOT_FOUND instead
of -ENOENT. Next this removes the logging when user specifies "missing"
and we don't find it in the kernel device list. Logging are for system
events not for user input errors.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
and UBIFS.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=j/qn
-----END PGP SIGNATURE-----
Merge tag 'upstream-4.3-rc4' of git://git.infradead.org/linux-ubifs
Pull UBI/UBIFS fixes from Richard Weinberger:
"This contains three bug fixes for both UBI and UBIFS"
* tag 'upstream-4.3-rc4' of git://git.infradead.org/linux-ubifs:
UBI: return ENOSPC if no enough space available
UBI: Validate data_size
UBIFS: Kill unneeded locking in ubifs_init_security
So the /proc/PID/stat 'wchan' field (the 30th field, which contains
the absolute kernel address of the kernel function a task is blocked in)
leaks absolute kernel addresses to unprivileged user-space:
seq_put_decimal_ull(m, ' ', wchan);
The absolute address might also leak via /proc/PID/wchan as well, if
KALLSYMS is turned off or if the symbol lookup fails for some reason:
static int proc_pid_wchan(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task)
{
unsigned long wchan;
char symname[KSYM_NAME_LEN];
wchan = get_wchan(task);
if (lookup_symbol_name(wchan, symname) < 0) {
if (!ptrace_may_access(task, PTRACE_MODE_READ))
return 0;
seq_printf(m, "%lu", wchan);
} else {
seq_printf(m, "%s", symname);
}
return 0;
}
This isn't ideal, because for example it trivially leaks the KASLR offset
to any local attacker:
fomalhaut:~> printf "%016lx\n" $(cat /proc/$$/stat | cut -d' ' -f35)
ffffffff8123b380
Most real-life uses of wchan are symbolic:
ps -eo pid:10,tid:10,wchan:30,comm
and procps uses /proc/PID/wchan, not the absolute address in /proc/PID/stat:
triton:~/tip> strace -f ps -eo pid:10,tid:10,wchan:30,comm 2>&1 | grep wchan | tail -1
open("/proc/30833/wchan", O_RDONLY) = 6
There's one compatibility quirk here: procps relies on whether the
absolute value is non-zero - and we can provide that functionality
by outputing "0" or "1" depending on whether the task is blocked
(whether there's a wchan address).
These days there appears to be very little legitimate reason
user-space would be interested in the absolute address. The
absolute address is mostly historic: from the days when we
didn't have kallsyms and user-space procps had to do the
decoding itself via the System.map.
So this patch sets all numeric output to "0" or "1" and keeps only
symbolic output, in /proc/PID/wchan.
( The absolute sleep address can generally still be profiled via
perf, by tasks with sufficient privileges. )
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: kasan-dev <kasan-dev@googlegroups.com>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150930135917.GA3285@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
btrfs_error() and btrfs_std_error() does the same thing
and calls _btrfs_std_error(), so consolidate them together.
And the main motivation is that btrfs_error() is closely
named with btrfs_err(), one handles error action the other
is to log the error, so don't closely name them.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Suggested-by: David Sterba <dsterba@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
error handling logic behaves differently with or without
CONFIG_PRINTK defined, since there are two copies of the same
function which a bit of different logic
One, when CONFIG_PRINTK is defined, code is
__btrfs_std_error(..)
{
::
save_error_info(fs_info);
if (sb->s_flags & MS_BORN)
btrfs_handle_error(fs_info);
}
and two when CONFIG_PRINTK is not defined, the code is
__btrfs_std_error(..)
{
::
if (sb->s_flags & MS_BORN) {
save_error_info(fs_info);
btrfs_handle_error(fs_info);
}
}
I doubt if this was intentional ? and appear to have caused since
we maintain two copies of the same function and they got diverged
with commits.
Now to decide which logic is correct reviewed changes as below,
533574c6bc
Commit added two copies of this function
cf79ffb5b7
Commit made change to only one copy of the function and to the
copy when CONFIG_PRINTK is defined.
To fix this, instead of maintaining two copies of same function
approach, maintain single function, and just put the extra
portion of the code under CONFIG_PRINTK define.
This patch just does that. And keeps code of with CONFIG_PRINTK
defined.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This will return EIO when __bread() fails to read SB,
instead of EINVAL.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
According to commit a59d6293e5 ("debugfs: change parameter check in
debugfs_remove() functions"), this is meant to make cleanup easier for
callers. In that case it ought to be documented.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there
is no need to do that again from its callers. Drop it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve French <smfrench@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
c->oobbuf hasn't been kmalloced in jffs2_dataflash_setup, so
there is no need to free it.
Signed-off-by: Wei Fang <fangwei1@huawei.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
As new_valid_dev always returns 1, so !new_valid_dev check is not
needed, remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Pull CIFS fixes from Steve French:
"Four fixes from testing at the recent SMB3 Plugfest including two
important authentication ones (one fixes authentication problems to
some popular servers when clock times differ more than two hours
between systems, the other fixes Kerberos authentication for SMB3)"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
fix encryption error checks on mount
[SMB3] Fix sec=krb5 on smb3 mounts
cifs: use server timestamp for ntlmv2 authentication
disabling oplocks/leases via module parm enable_oplocks broken for SMB3
Pointed out by Dan Carpenter via smatch code analysis tool
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
Pull btrfs fixes from Chris Mason:
"This is an assorted set I've been queuing up:
Jeff Mahoney tracked down a tricky one where we ended up starting IO
on the wrong mapping for special files in btrfs_evict_inode. A few
people reported this one on the list.
Filipe found (and provided a test for) a difficult bug in reading
compressed extents, and Josef fixed up some quota record keeping with
snapshot deletion. Chandan killed off an accounting bug during DIO
that lead to WARN_ONs as we freed inodes"
* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: keep dropped roots in cache until transaction commit
Btrfs: Direct I/O: Fix space accounting
btrfs: skip waiting on ordered range for special files
Btrfs: fix read corruption of compressed and shared extents
Btrfs: remove unnecessary locking of cleaner_mutex to avoid deadlock
Btrfs: don't initialize a space info as full to prevent ENOSPC
Highlights include:
Stable patches:
- fix v4.2 SEEK on files over 2 gigs
- Fix a layout segment reference leak when pNFS I/O falls back to inband I/O.
- Fix recovery of recalled read delegations
Bugfixes:
- Fix a case where NFSv4 fails to send CLOSE after a server reboot
- Fix sunrpc to wait for connections to complete before retrying
- Fix sunrpc races between transport connect/disconnect and shutdown
- Fix an infinite loop when layoutget fail with BAD_STATEID
- nfs/filelayout: Fix NULL reference caused by double freeing of fh_array
- Fix a bogus WARN_ON_ONCE() in O_DIRECT when layout commit_through_mds is set
- Fix layoutreturn/close ordering issues.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=GdeV
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable patches:
- fix v4.2 SEEK on files over 2 gigs
- Fix a layout segment reference leak when pNFS I/O falls back to inband I/O.
- Fix recovery of recalled read delegations
Bugfixes:
- Fix a case where NFSv4 fails to send CLOSE after a server reboot
- Fix sunrpc to wait for connections to complete before retrying
- Fix sunrpc races between transport connect/disconnect and shutdown
- Fix an infinite loop when layoutget fail with BAD_STATEID
- nfs/filelayout: Fix NULL reference caused by double freeing of fh_array
- Fix a bogus WARN_ON_ONCE() in O_DIRECT when layout commit_through_mds is set
- Fix layoutreturn/close ordering issues"
* tag 'nfs-for-4.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS41: make close wait for layoutreturn
NFS: Skip checking ds_cinfo.buckets when lseg's commit_through_mds is set
NFSv4.x/pnfs: Don't try to recover stateids twice in layoutget
NFSv4: Recovery of recalled read delegations is broken
NFS: Fix an infinite loop when layoutget fail with BAD_STATEID
NFS: Do cleanup before resetting pageio read/write to mds
SUNRPC: xs_sock_mark_closed() does not need to trigger socket autoclose
SUNRPC: Lock the transport layer on shutdown
nfs/filelayout: Fix NULL reference caused by double freeing of fh_array
SUNRPC: Ensure that we wait for connections to complete before retrying
SUNRPC: drop null test before destroy functions
nfs: fix v4.2 SEEK on files over 2 gigs
SUNRPC: Fix races between socket connection and destroy code
nfs: fix pg_test page count calculation
Failing to send a CLOSE if file is opened WRONLY and server reboots on a 4.x mount
Configuration option EXT4_USE_FOR_EXT2 has no effect on ext3 support.
Support for ext3 is always included now.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: c290ea01ab ("fs: Remove ext3 filesystem driver")
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.com>
Kerberos, which is very important for security, was only enabled for
CIFS not SMB2/SMB3 mounts (e.g. vers=3.0)
Patch based on the information detailed in
http://thread.gmane.org/gmane.linux.kernel.cifs/10081/focus=10307
to enable Kerberized SMB2/SMB3
a) SMB2_negotiate: enable/use decode_negTokenInit in SMB2_negotiate
b) SMB2_sess_setup: handle Kerberos sectype and replicate Kerberos
SMB1 processing done in sess_auth_kerberos
Signed-off-by: Noel Power <noel.power@suse.com>
Signed-off-by: Jim McDonough <jmcd@samba.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
When direct read IO is submitted from kernel, it is often
unnecessary to dirty pages, for example of loop, dirtying pages
have been considered in the upper filesystem(over loop) side
already, and they don't need to be dirtied again.
So this patch doesn't dirtying pages for ITER_BVEC/ITER_KVEC
direct read, and loop should be the 1st case to use ITER_BVEC/ITER_KVEC
for direct read I/O.
The patch is based on previous Dave's patch.
Reviewed-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In case of wbc->sync_mode == WB_SYNC_ALL we need to do data integrity
write, thus mark request as WRITE_SYNC.
akpm: afaict this change will cause the data integrity write bios to be
placed onto the second queue in cfq_io_cq.cfqq[], which presumably results
in special treatment. The documentation for REQ_SYNC is horrid.
Signed-off-by: Roman Pen <r.peniaev@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
This allows us to refactor the procfs code, which saves a bit of
compiled space. More importantly it isolates most of the procfs
support code into a single file, so it's easier to #ifdef it out if
the proc file system has been disabled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Also statically allocate the ext4_kset and ext4_feat objects, since we
only need exactly one of each, and it's simpler and less code if we
drop the dynamic allocation and deallocation when it's not needed.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the generic mount_bdev() function, deactivate_locked_super() is
called after the fill_super() call fails, at which point s_mode has been
set. kill_block_super() expects this and dumps a warning when
FMODE_EXCL is not set in s_mode.
In gfs2_mount() we call deactivate_locked_super() on failure of
gfs2_mount_args(), at which point s_mode has not yet been set. This
causes kill_block_super() to dump a stack trace when gfs2 fails to mount
with invalid options. Set s_mode earlier in gfs2_mount() to avoid that.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
If we send a layoutreturn asynchronously before close, the close
might reach server first and layoutreturn would fail with BADSTATEID
because there is nothing keeping the layout stateid alive.
Also do not pretend sending layoutreturn if we are not.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The order of the following three spinlocks should be:
dlm_domain_lock < dlm_ctxt->spinlock < dlm_lock_resource->spinlock
But dlm_dispatch_assert_master() is called while holding
dlm_ctxt->spinlock and dlm_lock_resource->spinlock, and then it calls
dlm_grab() which will take dlm_domain_lock.
Once another thread (for example, dlm_query_join_handler) has already
taken dlm_domain_lock, and tries to take dlm_ctxt->spinlock deadlock
happens.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: "Junxiao Bi" <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 51360155ec and adapts
fs/userfaultfd.c to use the old version of that function.
It didn't look robust to call __wake_up_common with "nr == 1" when we
absolutely require wakeall semantics, but we've full control of what we
insert in the two waitqueue heads of the blocked userfaults. No
exclusive waitqueue risks to be inserted into those two waitqueue heads
so we can as well stick to "nr == 1" of the old code and we can rely
purely on the fact no waitqueue inserted in one of the two waitqueue
heads we must enforce as wakeall, has wait->flags WQ_FLAG_EXCLUSIVE set.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linux cifs mount with ntlmssp against an Mac OS X (Yosemite
10.10.5) share fails in case the clocks differ more than +/-2h:
digest-service: digest-request: od failed with 2 proto=ntlmv2
digest-service: digest-request: kdc failed with -1561745592 proto=ntlmv2
Fix this by (re-)using the given server timestamp for the
ntlmv2 authentication (as Windows 7 does).
A related problem was also reported earlier by Namjae Jaen (see below):
Windows machine has extended security feature which refuse to allow
authentication when there is time difference between server time and
client time when ntlmv2 negotiation is used. This problem is prevalent
in embedded enviornment where system time is set to default 1970.
Modern servers send the server timestamp in the TargetInfo Av_Pair
structure in the challenge message [see MS-NLMP 2.2.2.1]
In [MS-NLMP 3.1.5.1.2] it is explicitly mentioned that the client must
use the server provided timestamp if present OR current time if it is
not
Reported-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
leases (oplocks) were always requested for SMB2/SMB3 even when oplocks
disabled in the cifs.ko module.
Signed-off-by: Steve French <steve.french@primarydata.com>
Reviewed-by: Chandrika Srinivasan <chandrika.srinivasan@citrix.com>
CC: Stable <stable@vger.kernel.org>
When dropping a snapshot we need to account for the qgroup changes. If we drop
the snapshot in all one go then the backref code will fail to find blocks from
the snapshot we dropped since it won't be able to find the root in the fs root
cache. This can lead to us failing to find refs from other roots that pointed
at blocks in the now deleted root. To handle this we need to not remove the fs
roots from the cache until after we process the qgroup operations. Do this by
adding dropped roots to a list on the transaction, and letting the transaction
remove the roots at the same time it drops the commit roots. This will keep all
of the backref searching code in sync properly, and fixes a problem Mark was
seeing with snapshot delete and qgroups. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Signed-off-by: Chris Mason <clm@fb.com>
Previously __gfs2_fallocate() relied on file_update_time() marking the
inode dirty, but that's not a safe assumption as that function doesn't
dirty the inode in some cases. Mark the inode dirty explicitly.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Remove unneeded NULL test.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@ expression x; @@
-if (x != NULL)
\(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
The following call trace is seen when generic/095 test is executed,
WARNING: CPU: 3 PID: 2769 at /home/chandan/code/repos/linux/fs/btrfs/inode.c:8967 btrfs_destroy_inode+0x284/0x2a0()
Modules linked in:
CPU: 3 PID: 2769 Comm: umount Not tainted 4.2.0-rc5+ #31
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20150306_163512-brownie 04/01/2014
ffffffff81c08150 ffff8802ec9cbce8 ffffffff81984058 ffff8802ffd8feb0
0000000000000000 ffff8802ec9cbd28 ffffffff81050385 ffff8802ec9cbd38
ffff8802d12f8588 ffff8802d12f8588 ffff8802f15ab000 ffff8800bb96c0b0
Call Trace:
[<ffffffff81984058>] dump_stack+0x45/0x57
[<ffffffff81050385>] warn_slowpath_common+0x85/0xc0
[<ffffffff81050465>] warn_slowpath_null+0x15/0x20
[<ffffffff81340294>] btrfs_destroy_inode+0x284/0x2a0
[<ffffffff8117ce07>] destroy_inode+0x37/0x60
[<ffffffff8117cf39>] evict+0x109/0x170
[<ffffffff8117cfd5>] dispose_list+0x35/0x50
[<ffffffff8117dd3a>] evict_inodes+0xaa/0x100
[<ffffffff81165667>] generic_shutdown_super+0x47/0xf0
[<ffffffff81165951>] kill_anon_super+0x11/0x20
[<ffffffff81302093>] btrfs_kill_super+0x13/0x110
[<ffffffff81165c99>] deactivate_locked_super+0x39/0x70
[<ffffffff811660cf>] deactivate_super+0x5f/0x70
[<ffffffff81180e1e>] cleanup_mnt+0x3e/0x90
[<ffffffff81180ebd>] __cleanup_mnt+0xd/0x10
[<ffffffff81069c06>] task_work_run+0x96/0xb0
[<ffffffff81003a3d>] do_notify_resume+0x3d/0x50
[<ffffffff8198cbc2>] int_signal+0x12/0x17
This means that the inode had non-zero "outstanding extents" during
eviction. This occurs because, during direct I/O a task which successfully
used up its reserved data space would set BTRFS_INODE_DIO_READY bit and does
not clear the bit after finishing the DIO write. A future DIO write could
actually fail and the unused reserve space won't be freed because of the
previously set BTRFS_INODE_DIO_READY bit.
Clearing the BTRFS_INODE_DIO_READY bit in btrfs_direct_IO() caused the
following issue,
|-----------------------------------+-------------------------------------|
| Task A | Task B |
|-----------------------------------+-------------------------------------|
| Start direct i/o write on inode X.| |
| reserve space | |
| Allocate ordered extent | |
| release reserved space | |
| Set BTRFS_INODE_DIO_READY bit. | |
| | splice() |
| | Transfer data from pipe buffer to |
| | destination file. |
| | - kmap(pipe buffer page) |
| | - Start direct i/o write on |
| | inode X. |
| | - reserve space |
| | - dio_refill_pages() |
| | - sdio->blocks_available == 0 |
| | - Since a kernel address is |
| | being passed instead of a |
| | user space address, |
| | iov_iter_get_pages() returns |
| | -EFAULT. |
| | - Since BTRFS_INODE_DIO_READY is |
| | set, we don't release reserved |
| | space. |
| | - Clear BTRFS_INODE_DIO_READY bit.|
| -EIOCBQUEUED is returned. | |
|-----------------------------------+-------------------------------------|
Hence this commit introduces "struct btrfs_dio_data" to track the usage of
reserved data space. The remaining unused "reserve space" can now be freed
reliably.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
locks_get_lock_context() uses cmpxchg() to install i_flctx.
cmpxchg() is a release operation which is correct. But it uses
a plain load to load i_flctx. This is incorrect. Subsequent loads
from i_flctx can hoist above the load of i_flctx pointer itself
and observe uninitialized garbage there. This in turn can lead
to corruption of ctx->flc_lock and other members.
Documentation/memory-barriers.txt explicitly requires to use
a barrier in such context:
"A load-load control dependency requires a full read memory barrier".
Use smp_load_acquire() in locks_get_lock_context() and in bunch
of other functions that can proceed concurrently with
locks_get_lock_context().
The data race was found with KernelThreadSanitizer (KTSAN).
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
If the current open or layout stateid doesn't match the stateid used
in the layoutget RPC call, then don't try to recover it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When a read delegation is being recalled, and we're reclaiming the
cached opens, we need to make sure that we only reclaim read-only
modes.
A previous attempt to do this, relied on retrieving the delegation
type from the nfs4_opendata structure. Unfortunately, as Kinglong
pointed out, this field can only be set when performing reboot recovery.
Furthermore, if we call nfs4_open_recover(), then we end up clobbering
the state->flags for all modes that we're not recovering...
The fix is to have the delegation recall code pass this information
to the recovery call, and then refactor the recovery code so that
nfs4_open_delegation_recall() does not need to call nfs4_open_recover().
Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes: 39f897fdbd ("NFSv4: When returning a delegation, don't...")
Tested-by: Kinglong Mee <kinglongmee@gmail.com>
Cc: NeilBrown <neilb@suse.com>
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If layouget fail with BAD_STATEID, restart should not using the old stateid.
But, nfs client choose the layout stateid at first, and then the open stateid.
To avoid the infinite loop of using bad stateid for layoutget,
this patch sets the layout flag'ss NFS_LAYOUT_INVALID_STID bit to
skip choosing the bad layout stateid.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
There is a reference leak of layout segment after resetting
pageio read/write to mds.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull libnvdimm fixes from Dan Williams:
- a boot regression (since v4.2) fix for some ARM configurations from
Tyler
- regression (since v4.1) fixes for mkfs.xfs on a DAX enabled device
from Jeff. These are tagged for -stable.
- a pair of locking fixes from Axel that are hidden from lockdep since
they involve device_lock(). The "btt" one is tagged for -stable, the
other only applies to the new "pfn" mechanism in v4.3.
- a fix for the pmem ->rw_page() path to use wmb_pmem() from Ross.
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
mm: fix type cast in __pfn_to_phys()
pmem: add proper fencing to pmem_rw_page()
libnvdimm: pfn_devs: Fix locking in namespace_store
libnvdimm: btt_devs: Fix locking in namespace_store
blockdev: don't set S_DAX for misaligned partitions
dax: fix O_DIRECT I/O to the last block of a blockdev
Commit 505a666ee3 ("writeback: plug writeback in wb_writeback() and
writeback_inodes_wb()") has us holding a plug during writeback_sb_inodes,
which increases the merge rate when relatively contiguous small files
are written by the filesystem. It helps both on flash and spindles.
For an fs_mark workload creating 4K files in parallel across 8 drives,
this commit improves performance ~9% more by unplugging before calling
cond_resched(). cond_resched() doesn't trigger an implicit unplug, so
explicitly getting the IO down to the device before scheduling reduces
latencies for anyone waiting on clean pages.
It also cuts down on how often we use kblockd to unplug, which means
less work bouncing from one workqueue to another.
Many more details about how we got here:
https://lkml.org/lkml/2015/9/11/570
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a memleak if anon_inode_getfile() fails in userfaultfd().
Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We're incorrectly assigning a loff_t return to an int. If SEEK_HOLE or
SEEK_DATA returns an offset over 2^31 then the application will see a
weird lseek() result (usually -EIO).
Cc: stable@vger.kernel.org
Fixes: bdcc2cd14e "NFSv4.2: handle NFS-specific llseek errors"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Reviewed-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We really want sizeof(struct page *) instead. Otherwise we limit
maximum IO size to 64 pages rather than 512 pages on a 64bit system.
Fixes 2e11f829(nfs: cap request size to fit a kmalloced page array).
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Fixes: 2e11f8296d ("nfs: cap request size to fit a kmalloced page array")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
A test case is as the description says:
open(foobar, O_WRONLY);
sleep() --> reboot the server
close(foobar)
The bug is because in nfs4state.c in nfs4_reclaim_open_state() a few
line before going to restart, there is
clear_bit(NFS4CLNT_RECLAIM_NOGRACE, &state->flags).
NFS4CLNT_RECLAIM_NOGRACE is a flag for the client states not open
owner states. Value of NFS4CLNT_RECLAIM_NOGRACE is 4 which is the
value of NFS_O_WRONLY_STATE in nfs4_state->flags. So clearing it wipes
out state and when we go to close it, “call_close” doesn’t get set as
state flag is not set and CLOSE doesn’t go on the wire.
Signed-off-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The dax code doesn't currently support misaligned partitions,
so disable O_DIRECT via dax until such time as that support
materializes.
Cc: <stable@vger.kernel.org>
Suggested-by: Boaz Harrosh <boaz@plexistor.com>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit bbab37ddc2 (block: Add support for DAX reads/writes to
block devices) caused a regression in mkfs.xfs. That utility
sets the block size of the device to the logical block size
using the BLKBSZSET ioctl, and then issues a single sector read
from the last sector of the device. This results in the dax_io
code trying to do a page-sized read from 512 bytes from the end
of the device. The result is -ERANGE being returned to userspace.
The fix is to align the block to the page size before calling
get_block.
Thanks to willy for simplifying my original patch.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Linda Knippers <linda.knippers@hp.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In btrfs_evict_inode, we properly truncate the page cache for evicted
inodes but then we call btrfs_wait_ordered_range for every inode as well.
It's the right thing to do for regular files but results in incorrect
behavior for device inodes for block devices.
filemap_fdatawrite_range gets called with inode->i_mapping which gets
resolved to the block device inode before getting passed to
wbc_attach_fdatawrite_inode and ultimately to inode_to_bdi. What happens
next depends on whether there's an open file handle associated with the
inode. If there is, we write to the block device, which is unexpected
behavior. If there isn't, we through normally and inode->i_data is used.
We can also end up racing against open/close which can result in crashes
when i_mapping points to a block device inode that has been closed.
Since there can't be any page cache associated with special file inodes,
it's safe to skip the btrfs_wait_ordered_range call entirely and avoid
the problem.
Cc: <stable@vger.kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100911
Tested-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
If a file has a range pointing to a compressed extent, followed by
another range that points to the same compressed extent and a read
operation attempts to read both ranges (either completely or part of
them), the pages that correspond to the second range are incorrectly
filled with zeroes.
Consider the following example:
File layout
[0 - 8K] [8K - 24K]
| |
| |
points to extent X, points to extent X,
offset 4K, length of 8K offset 0, length 16K
[extent X, compressed length = 4K uncompressed length = 16K]
If a readpages() call spans the 2 ranges, a single bio to read the extent
is submitted - extent_io.c:submit_extent_page() would only create a new
bio to cover the second range pointing to the extent if the extent it
points to had a different logical address than the extent associated with
the first range. This has a consequence of the compressed read end io
handler (compression.c:end_compressed_bio_read()) finish once the extent
is decompressed into the pages covering the first range, leaving the
remaining pages (belonging to the second range) filled with zeroes (done
by compression.c:btrfs_clear_biovec_end()).
So fix this by submitting the current bio whenever we find a range
pointing to a compressed extent that was preceded by a range with a
different extent map. This is the simplest solution for this corner
case. Making the end io callback populate both ranges (or more, if we
have multiple pointing to the same extent) is a much more complex
solution since each bio is tightly coupled with a single extent map and
the extent maps associated to the ranges pointing to the shared extent
can have different offsets and lengths.
The following test case for fstests triggers the issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_cloner
rm -f $seqres.full
test_clone_and_read_compressed_extent()
{
local mount_opts=$1
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount $mount_opts
# Create a test file with a single extent that is compressed (the
# data we write into it is highly compressible no matter which
# compression algorithm is used, zlib or lzo).
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 4K" \
-c "pwrite -S 0xbb 4K 8K" \
-c "pwrite -S 0xcc 12K 4K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Now clone our extent into an adjacent offset.
$CLONER_PROG -s $((4 * 1024)) -d $((16 * 1024)) -l $((8 * 1024)) \
$SCRATCH_MNT/foo $SCRATCH_MNT/foo
# Same as before but for this file we clone the extent into a lower
# file offset.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 8K 4K" \
-c "pwrite -S 0xbb 12K 8K" \
-c "pwrite -S 0xcc 20K 4K" \
$SCRATCH_MNT/bar | _filter_xfs_io
$CLONER_PROG -s $((12 * 1024)) -d 0 -l $((8 * 1024)) \
$SCRATCH_MNT/bar $SCRATCH_MNT/bar
echo "File digests before unmounting filesystem:"
md5sum $SCRATCH_MNT/foo | _filter_scratch
md5sum $SCRATCH_MNT/bar | _filter_scratch
# Evicting the inode or clearing the page cache before reading
# again the file would also trigger the bug - reads were returning
# all bytes in the range corresponding to the second reference to
# the extent with a value of 0, but the correct data was persisted
# (it was a bug exclusively in the read path). The issue happened
# only if the same readpages() call targeted pages belonging to the
# first and second ranges that point to the same compressed extent.
_scratch_remount
echo "File digests after mounting filesystem again:"
# Must match the same digests we got before.
md5sum $SCRATCH_MNT/foo | _filter_scratch
md5sum $SCRATCH_MNT/bar | _filter_scratch
}
echo -e "\nTesting with zlib compression..."
test_clone_and_read_compressed_extent "-o compress=zlib"
_scratch_unmount
echo -e "\nTesting with lzo compression..."
test_clone_and_read_compressed_extent "-o compress=lzo"
status=0
exit
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo<quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Pull CIFS fixes from Steve French:
"Two small cifs fixes"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
[CIFS] mount option sec=none not displayed properly in /proc/mounts
CIFS: fix type confusion in copy offload ioctl
Fix up the writeback plugging introduced in commit d353d7587d
("writeback: plug writeback at a high level") that then caused problems
due to the unplug happening with a spinlock held.
* writeback-plugging:
writeback: plug writeback in wb_writeback() and writeback_inodes_wb()
Revert "writeback: plug writeback at a high level"
We had to revert the pluggin in writeback_sb_inodes() because the
wb->list_lock is held, but we could easily plug at a higher level before
taking that lock, and unplug after releasing it. This does that.
Chris will run performance numbers, just to verify that this approach is
comparable to the alternative (we could just drop and re-take the lock
around the blk_finish_plug() rather than these two commits.
I'd have preferred waiting for actual performance numbers before picking
one approach over the other, but I don't want to release rc1 with the
known "sleeping function called from invalid context" issue, so I'll
pick this cleanup version for now. But if the numbers show that we
really want to plug just at the writeback_sb_inodes() level, and we
should just play ugly games with the spinlock, we'll switch to that.
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge fourth patch-bomb from Andrew Morton:
- sys_membarier syscall
- seq_file interface changes
- a few misc fixups
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each"
mm/early_ioremap: add explicit #include of asm/early_ioremap.h
fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void
selftests: enhance membarrier syscall test
selftests: add membarrier syscall test
sys_membarrier(): system-wide memory barrier (generic, x86)
MODSIGN: fix a compilation warning in extract-cert
When the user specifies "sec=none" in a cifs mount, we set
sec_type as unspecified (and set a flag and the username will be
null) rather than setting sectype as "none" so
cifs_show_security was not properly displaying it in
cifs /proc/mounts entries.
Signed-off-by: Steve French <steve.french@primarydata.com>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Revert commit f83c7b5e9f ("ocfs2/dlm: use list_for_each_entry instead
of list_for_each").
list_for_each_entry() will dereference its `pos' argument, which can be
NULL in dlm_process_recovery_data().
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Reported-by: Fengguang Wu <fengguang.wu@gmail.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
