Currently, logical CPU id to physical hartid mapping is defined for both
smp and non-smp configurations. This is not required as we need this
only for smp configuration. The mapping function can define directly
boot_cpu_hartid for non-smp use case.
The reverse mapping function i.e. hartid to cpuid can be called for any
valid but not booted harts. So it should return default cpu 0 only if it
is a boot hartid.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
In SMP path, __cpu_up waits for other CPU to come online indefinitely.
This is wrong as other CPU might be disabled in machine mode and
possible CPU is set to the cpus present in DT.
Introduce a completion variable and waits only for a second.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use the new for_each_of_cpu_node() helper to iterate over cpu nodes
instead of open coding. Note that this will allow matching also on the
node name instead of the (for FDT) deprecated device_type property.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Follow the Linux convention and treat devicetree nodes without a status
property as enabled rather than disabled, while also allowing "ok" as a
shorthand for "okay".
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The riscv_of_processor_hartid() helper returns -ENODEV when the
specified node isn't an enabled and valid RISC-V hart node.
Also drop the unnecessary parenthesis around errno defines.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use the pr_info and pr_err macros instead of printk with explicit log
levels.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add missing newline characters to printk messages.
Also replace two pr_warning with the shorter pr_warn, and fix up the
tense of one error message while at it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
At least BBL relies on the flat binaries containing all the bytes in the
actual image to exist in the file. Before this revert the flat images
dropped the trailing zeros, which caused BBL to put its copy of the
device tree where Linux thought the BSS was, which wreaks all sorts of
havoc. Manifesting the bug is a bit subtle because BBL aligns
everything to 2MiB page boundaries, but with large enough kernels you're
almost certain to get bitten by the bug.
While moving the sections around isn't a great long-term fix, it will at
least avoid producing broken images.
This reverts commit 22e6a2e14c.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
max_low_pfn should be pfn_size not byte_size.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Mao Han <mao_han@c-sky.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The cond_resched() can be used to yield the CPU resource if
CONFIG_PREEMPT is not defined. Otherwise, cond_resched() is a dummy
function. In order to avoid kernel thread occupying entire CPU,
when CONFIG_PREEMPT=y, the kernel thread needs to follow the
rescheduling mechanism like a user thread.
Signed-off-by: Vincent Chen <vincentc@andestech.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This is sort of a mix between a new feature and a bug fix. I've managed
to screw up merging this patch set a handful of times but I think it's
OK this time around. The main new feature here is audit support for
RISC-V, with some fixes to audit-related bugs that cropped up along the
way:
* The addition of NR_syscalls into unistd.h, which is necessary for
CONFIG_FTRACE_SYSCALLS.
* The definition of CREATE_TRACE_POINTS so
__tracepoint_sys_{enter,exit} get defined.
* A fix for trace_sys_exit() so we can enable
CONFIG_HAVE_SYSCALL_TRACEPOINTS.
Define CREATE_TRACE_POINTS in order to create functions and structures
for the trace events. This is needed if HAVE_SYSCALL_TRACEPOINTS and
CONFIG_FTRACE_SYSCALLS are enabled, otherwise we get linking errors:
[..]
MODPOST vmlinux.o
kernel/trace/trace_syscalls.o: In function `.L0 ':
trace_syscalls.c:(.text+0x1152): undefined reference to `__tracepoint_sys_enter'
trace_syscalls.c:(.text+0x126c): undefined reference to `__tracepoint_sys_enter'
trace_syscalls.c:(.text+0x1328): undefined reference to `__tracepoint_sys_enter'
trace_syscalls.c:(.text+0x14aa): undefined reference to `__tracepoint_sys_enter'
trace_syscalls.c:(.text+0x1684): undefined reference to `__tracepoint_sys_exit'
trace_syscalls.c:(.text+0x17a0): undefined reference to `__tracepoint_sys_exit'
trace_syscalls.c:(.text+0x185c): undefined reference to `__tracepoint_sys_exit'
trace_syscalls.c:(.text+0x19de): undefined reference to `__tracepoint_sys_exit'
arch/riscv/kernel/ptrace.o: In function `.L0 ':
ptrace.c:(.text+0x4dc): undefined reference to `__tracepoint_sys_enter'
ptrace.c:(.text+0x632): undefined reference to `__tracepoint_sys_exit'
make: *** [Makefile:1036: vmlinux] Error 1
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Fixes: b78002b395b4 ("riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig")
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch adds auditing functions on entry to and exit from every system
call invocation.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
On RISC-V (riscv) audit is supported through generic lib/audit.c.
The patch adds required arch specific definitions.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch supports dynamic generate got and plt sections mechanism on
rv32. It contains the modification as follows:
- Always enable MODULE_SECTIONS (both rv64 and rv32)
- Change the fixed size type.
This patch had been tested by following modules:
btrfs 6795991 0 - Live 0xa544b000
test_static_keys 17304 0 - Live 0xa28be000
zstd_compress 1198986 1 btrfs, Live 0xa2a25000
zstd_decompress 608112 1 btrfs, Live 0xa24e7000
lzo 8787 0 - Live 0xa2049000
xor 27461 1 btrfs, Live 0xa2041000
zram 78849 0 - Live 0xa2276000
netdevsim 55909 0 - Live 0xa202d000
tun 211534 0 - Live 0xa21b5000
fuse 566049 0 - Live 0xa25fb000
nfs_layout_flexfiles 192597 0 - Live 0xa229b000
ramoops 74895 0 - Live 0xa2019000
xfs 3973221 0 - Live 0xa507f000
libcrc32c 3053 2 btrfs,xfs, Live 0xa34af000
lzo_compress 17302 2 btrfs,lzo, Live 0xa347d000
lzo_decompress 7178 2 btrfs,lzo, Live 0xa3451000
raid6_pq 142086 1 btrfs, Live 0xa33a4000
reed_solomon 31022 1 ramoops, Live 0xa31eb000
test_bitmap 3734 0 - Live 0xa31af000
test_bpf 1588736 0 - Live 0xa2c11000
test_kmod 41161 0 - Live 0xa29f8000
test_module 1356 0 - Live 0xa299e000
test_printf 6024 0 [permanent], Live 0xa2971000
test_static_key_base 5797 1 test_static_keys, Live 0xa2931000
test_user_copy 4382 0 - Live 0xa28c9000
xxhash 70501 2 zstd_compress,zstd_decompress, Live 0xa2055000
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add IPI_CPU_STOP message and use it in smp_send_stop to stop other cpus,
but not itself. Mark cpu offline on reception of IPI_CPU_STOP.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
CONFIG_CMDLINE_FORCE doesn't work on RISC-V when no DTB is passed into
the kernel. This is because the code that forces the kernel command
line only runs if a valid DTB is present at boot. During debugging,
it's useful to have the ability to force kernel command lines even
when no DTB is present. This patch adds support for doing so.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The objcopy only emits loadable sections when creating flat kernel
Image. To have minimal possible size of flat kernel Image, we should
have all non-loadable sections after loadable sections.
Currently, execption table section (loadable section) is after BSS
section (non-loadable section) in the RISC-V vmlinux.lds.S. This
is not optimal for having minimal flat kernel Image size hence this
patch makes BSS section as the last section in RISC-V vmlinux.lds.S.
In addition, we make BSS section aligned to 16byte instead of PAGE
aligned which further reduces flat kernel Image size by few KBs.
The flat kernel Image size of Linux-4.20-rc4 using GCC 8.2.0 is
8819980 bytes with current RISC-V vmlinux.lds.S and it reduces to
7991740 bytes with this patch applied. In summary, this patch reduces
Linux-4.20-rc4 flat kernel Image size by 809 KB.
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that we have earlycon support in the SBI console driver there is no
reason to have our arch-specific early printk support. This patch set
turns on SBI earlycon support and removes the old early printk.
Noticed while building kernel-4.20.0-0.rc5.git2.1.fc30 for
Fedora 30/RISCV.
[..]
BUILDSTDERR: arch/riscv/kernel/ftrace.c: In function 'prepare_ftrace_return':
BUILDSTDERR: arch/riscv/kernel/ftrace.c:135:6: warning: unused variable 'err' [-Wunused-variable]
BUILDSTDERR: int err;
BUILDSTDERR: ^~~
[..]
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Fixes: e949b6db51 ("riscv/function_graph: Simplify with function_graph_enter()")
Reviewed-by: Olof Johansson <olof@lixom.net>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Fix of_node* refcount at various places by using of_node_put.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The EARLY_PRINTK using SBI console calls is not required
any more because we now have RISC-V SBI support in generic
earlycon framework.
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
was introduced by a patch that tried to fix one bug, but by doing so created
another bug. As both bugs corrupt the output (but they do not crash the
kernel), I decided to fix the design such that it could have both bugs
fixed. The original fix, fixed time reporting of the function graph tracer
when doing a max_depth of one. This was code that can test how much the
kernel interferes with userspace. But in doing so, it could corrupt the time
keeping of the function profiler.
The issue is that the curr_ret_stack variable was being used for two
different meanings. One was to keep track of the stack pointer on the
ret_stack (shadow stack used by the function graph tracer), and the other
use case was the graph call depth. Although, the two may be closely
related, where they got updated was the issue that lead to the two different
bugs that required the two use cases to be updated differently.
The big issue with this fix is that it requires changing each architecture.
The good news is, I was able to remove a lot of code that was duplicated
within the architectures and place it into a single location. Then I could
make the fix in one place.
I pushed this code into linux-next to let it settle over a week, and before
doing so, I cross compiled all the affected architectures to make sure that
they built fine.
In the mean time, I also pulled in a patch that fixes the sched_switch
previous tasks state output, that was not actually correct.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW/4NPhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnWAAQCyUIRLgYImr81eTl52lxNRsULk+aiI
U29kRFWWU0c40AEA1X9sDF0MgOItbRGfZtnHTZEousXRDaDf4Fge2kF7Egg=
=liQ0
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"While rewriting the function graph tracer, I discovered a design flaw
that was introduced by a patch that tried to fix one bug, but by doing
so created another bug.
As both bugs corrupt the output (but they do not crash the kernel), I
decided to fix the design such that it could have both bugs fixed. The
original fix, fixed time reporting of the function graph tracer when
doing a max_depth of one. This was code that can test how much the
kernel interferes with userspace. But in doing so, it could corrupt
the time keeping of the function profiler.
The issue is that the curr_ret_stack variable was being used for two
different meanings. One was to keep track of the stack pointer on the
ret_stack (shadow stack used by the function graph tracer), and the
other use case was the graph call depth. Although, the two may be
closely related, where they got updated was the issue that lead to the
two different bugs that required the two use cases to be updated
differently.
The big issue with this fix is that it requires changing each
architecture. The good news is, I was able to remove a lot of code
that was duplicated within the architectures and place it into a
single location. Then I could make the fix in one place.
I pushed this code into linux-next to let it settle over a week, and
before doing so, I cross compiled all the affected architectures to
make sure that they built fine.
In the mean time, I also pulled in a patch that fixes the sched_switch
previous tasks state output, that was not actually correct"
* tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
sched, trace: Fix prev_state output in sched_switch tracepoint
function_graph: Have profiler use curr_ret_stack and not depth
function_graph: Reverse the order of pushing the ret_stack and the callback
function_graph: Move return callback before update of curr_ret_stack
function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack
function_graph: Make ftrace_push_return_trace() static
sparc/function_graph: Simplify with function_graph_enter()
sh/function_graph: Simplify with function_graph_enter()
s390/function_graph: Simplify with function_graph_enter()
riscv/function_graph: Simplify with function_graph_enter()
powerpc/function_graph: Simplify with function_graph_enter()
parisc: function_graph: Simplify with function_graph_enter()
nds32: function_graph: Simplify with function_graph_enter()
MIPS: function_graph: Simplify with function_graph_enter()
microblaze: function_graph: Simplify with function_graph_enter()
arm64: function_graph: Simplify with function_graph_enter()
ARM: function_graph: Simplify with function_graph_enter()
x86/function_graph: Simplify with function_graph_enter()
function_graph: Create function_graph_enter() to consolidate architecture code
The function_graph_enter() function does the work of calling the function
graph hook function and the management of the shadow stack, simplifying the
work done in the architecture dependent prepare_ftrace_return().
Have riscv use the new code, and remove the shadow stack management as well as
having to set up the trace structure.
This is needed to prepare for a fix of a design bug on how the curr_ret_stack
is used.
Cc: Greentime Hu <greentime@andestech.com>
Cc: Alan Kao <alankao@andestech.com>
Cc: stable@kernel.org
Fixes: 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Removes the warning about an unsupported ISA when reading /proc/cpuinfo
on QEMU. The "S" extension is not being returned as it is not accessible
from userspace.
Signed-off-by: Patrick Stählin <me@packi.ch>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch extends Linux RISC-V build system to build and install:
Image - Flat uncompressed kernel image
Image.gz - Flat and GZip compressed kernel image
Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of
booting flat and compressed kernel images. In case of Uboot, booting
Image or Image.gz is achieved using bootm command.
The flat and uncompressed kernel image (i.e. Image) is very useful
in pre-silicon developent and testing because we can create back-door
HEX files for RAM on FPGAs from Image.
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Fixes:
arch/riscv/kernel/module.c: In function 'apply_r_riscv_32_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:23:27: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_pcrel_hi20_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:104:23: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_hi20_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:146:23: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_got_hi20_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:190:60: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_plt_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:214:24: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:236:23: note: format string is defined here
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
On the Hifive-U platform, cpu 0 is a masked cpu with less capabilities
than the other cpus. Ignore it for the purpose of determining the
hardware capabilities of the system.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch series now has evolved to contain several related changes.
1. Updated the assorted cleanup series by Palmer.
The original cleanup patch series can be found here.
http://lists.infradead.org/pipermail/linux-riscv/2018-August/001232.html
2. Implemented decoupling linux logical CPU ids from hart id.
Some of the work has been inspired from ARM64.
Tested on QEMU & HighFive Unleashed board with/without SMP enabled.
3. Included Anup's cleanup and IPI stat patch.
All the patch series have been combined to avoid conflicts as a lot of
common code is changed different patch sets. Atish has mostly addressed
review comments and fixed checkpatch errors from Palmer's and Anup's
series.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch set fixes up various failures in the RV32I port. The fixes
are all nominally independent, but are really only testable together
because the RV32I port fails to build without all of them. The patch
set includes:
* The removal of tishift on RV32I targets, as 128-bit integers are not
supported by the toolchain.
* The removal of swiotlb from RV32I targets, since all physical
addresses can be mapped by all hardware on all existing RV32I targets.
* The addition of ummodi3 and udivmoddi4 from an old version of GCC that
was licensed under GPLv2 as generic code, along with their use on
RV32I targets.
* A fix to our page alignment logic within ioremap for RV32I targets.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patchset adds an option, CONFIG_FPU, to enable/disable floating-
point support within the kernel. The kernel's new behavior will be as
follows:
* with CONFIG_FPU=y
All FPU codes are reserved. If no FPU is found during booting, a
global flag will be set, and those functions will be bypassed with
condition check to that flag.
* with CONFIG_FPU=n
No floating-point instructions in kernel and all related settings
are excluded.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This export is not only not needed, but also breaks symbol versioning
due to being an undeclared assembly export.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add a variable and a macro to describe FP registers, assuming only D is
supported. FP code is conditional on CONFIG_FPU. The FP regs and FCSR
are copied separately to avoid copying struct padding. Tested by hand and
with the gdb testsuite.
Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The RISC-V Linux port doesn't support systems that have the F extension
but don't have the D extension -- we actually don't support systems
without D either, but Alan's patch set is rectifying that soon. For now
I think we can leave this in a semi-broken state and just wait for
Alan's patch set to get merged for proper non-FPU support -- the patch
set is starting to look good, so doing something in-between doesn't seem
like it's worth the work.
I don't think it's worth fretting about support for systems with F but
not D for now: our glibc ABIs are IMAC and IMAFDC so they probably won't
end up being popular. We can always extend this in the future.
CC: Alan Kao <alankao@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
These are just hard coded in the RISC-V port, which doesn't make any
sense. We should probably be setting these from device tree entries
when they exist, but for now I think it's saner to just leave them all
as their default values.
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch provides arch_show_interrupts() implementation to
show IPI stats via /proc/interrupts.
Now the contents of /proc/interrupts" will look like below:
CPU0 CPU1 CPU2 CPU3
8: 17 7 6 14 SiFive PLIC 8 virtio0
10: 10 10 9 11 SiFive PLIC 10 ttyS0
IPI0: 170 673 251 79 Rescheduling interrupts
IPI1: 1 12 27 1 Function call interrupts
Signed-off-by: Anup Patel <anup@brainfault.org>
[Atish - Fixed checkpatch errors]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Changes since v2:
- Remove use of IPI_CALL_WAKEUP because it's being removed
Changes since v1:
- Add stub inline show_ipi_stats() function for !CONFIG_SMP
- Make ipi_names[] dynamically sized at compile time
- Minor beautification of ipi_names[] using tabs
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Currently, /proc/cpuinfo show logical CPU ID as Hart ID which
is in-correct. This patch shows CPU ID and Hart ID separately
in /proc/cpuinfo using cpuid_to_hardid_map().
With this patch, contents of /proc/cpuinfo looks as follows:
processor : 0
hart : 1
isa : rv64imafdc
mmu : sv48
processor : 1
hart : 0
isa : rv64imafdc
mmu : sv48
processor : 2
hart : 2
isa : rv64imafdc
mmu : sv48
processor : 3
hart : 3
isa : rv64imafdc
mmu : sv48
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Setup the cpu_logical_map during boot. Moreover, every SBI call
and PLIC context are based on the physical hartid. Use the logical
CPU to hartid mapping to pass correct hartid to respective functions.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Currently, both Linux CPU id and hart id are same.
This is not recommended as it will lead to discontinuous CPU
indexing in Linux. Moreover, kdump kernel will run from CPU0
which would be absent if we follow existing scheme.
Implement a logical mapping between Linux CPU id and hart
id to decouple these two. Always mark the boot processor as
CPU0 and all other CPUs get the logical CPU id based on their
booting order.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The secondary harts spin on couple of per cpu variables until both of
these are non-zero so it's not necessary to have any ordering here.
However, WRITE_ONCE should be used to avoid tearing.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
commit f1f1007644 ("mm: add new mmgrab() helper") added a
helper that we missed out on.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The old name was a bit odd.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
It's a bit confusing exactly what this function does: it actually
returns the hartid of an OF processor node, failing with -1 on invalid
nodes. I've changed the name to _hartid() in order to make that a bit
more clear, as well as adding a comment.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Currently, irq is enabled before preemption disabling happens.
If the scheduler fired right here and cpu is scheduled then it
may blow up.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: Commit text and code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
We shouldn't be directly passing device tree values to userspace, both
because there could be mistakes in device trees and because the kernel
doesn't support arbitrary ISAs.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: checkpatch fix and code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
