Commit db2462a6ad ("btrfs: don't run delayed refs in the end transaction
logic") removed its last use, so now it does absolutely nothing, therefore
remove it.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
qgroup_rsv_size is calculated as the product of
outstanding_extent * fs_info->nodesize. The product is calculated with
32 bit precision since both variables are defined as u32. Yet
qgroup_rsv_size expects a 64 bit result.
Avoid possible multiplication overflow by casting outstanding_extent to
u64. Such overflow would in the worst case (64K nodesize) require more
than 65536 extents, which is quite large and i'ts not likely that it
would happen in practice.
Fixes-coverity-id: 1435101
Fixes: ff6bc37eb7 ("btrfs: qgroup: Use independent and accurate per inode qgroup rsv")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously we only updated the drop_progress key if we were in the
DROP_REFERENCE stage of snapshot deletion. This is because the
UPDATE_BACKREF stage checks the flags of the blocks it's converting to
FULL_BACKREF, so if we go over a block we processed before it doesn't
matter, we just don't do anything.
The problem is in do_walk_down() we will go ahead and drop the roots
reference to any blocks that we know we won't need to walk into.
Given subvolume A and snapshot B. The root of B points to all of the
nodes that belong to A, so all of those nodes have a refcnt > 1. If B
did not modify those blocks it'll hit this condition in do_walk_down
if (!wc->update_ref ||
generation <= root->root_key.offset)
goto skip;
and in "goto skip" we simply do a btrfs_free_extent() for that bytenr
that we point at.
Now assume we modified some data in B, and then took a snapshot of B and
call it C. C points to all the nodes in B, making every node the root
of B points to have a refcnt > 1. This assumes the root level is 2 or
higher.
We delete snapshot B, which does the above work in do_walk_down,
free'ing our ref for nodes we share with A that we didn't modify. Now
we hit a node we _did_ modify, thus we own. We need to walk down into
this node and we set wc->stage == UPDATE_BACKREF. We walk down to level
0 which we also own because we modified data. We can't walk any further
down and thus now need to walk up and start the next part of the
deletion. Now walk_up_proc is supposed to put us back into
DROP_REFERENCE, but there's an exception to this
if (level < wc->shared_level)
goto out;
we are at level == 0, and our shared_level == 1. We skip out of this
one and go up to level 1. Since path->slots[1] < nritems we
path->slots[1]++ and break out of walk_up_tree to stop our transaction
and loop back around. Now in btrfs_drop_snapshot we have this snippet
if (wc->stage == DROP_REFERENCE) {
level = wc->level;
btrfs_node_key(path->nodes[level],
&root_item->drop_progress,
path->slots[level]);
root_item->drop_level = level;
}
our stage == UPDATE_BACKREF still, so we don't update the drop_progress
key. This is a problem because we would have done btrfs_free_extent()
for the nodes leading up to our current position. If we crash or
unmount here and go to remount we'll start over where we were before and
try to free our ref for blocks we've already freed, and thus abort()
out.
Fix this by keeping track of the last place we dropped a reference for
our block in do_walk_down. Then if wc->stage == UPDATE_BACKREF we know
we'll start over from a place we meant to, and otherwise things continue
to work as they did before.
I have a complicated reproducer for this problem, without this patch
we'll fail to fsck the fs when replaying the log writes log. With this
patch we can replay the whole log without any fsck or mount failures.
The steps to reproduce this easily are sort of tricky, I had to add a
couple of debug patches to the kernel in order to make it easy,
basically I just needed to make sure we did actually commit the
transaction every time we finished a walk_down_tree/walk_up_tree combo.
The reproducer:
1) Creates a base subvolume.
2) Creates 100k files in the subvolume.
3) Snapshots the base subvolume (snap1).
4) Touches files 5000-6000 in snap1.
5) Snapshots snap1 (snap2).
6) Deletes snap1.
I do this with dm-log-writes, and then replay to every FUA in the log
and fsck the fs.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ copy reproducer steps ]
Signed-off-by: David Sterba <dsterba@suse.com>
There's a bug in snapshot deletion where we won't update the
drop_progress key if we're in the UPDATE_BACKREF stage. This is a
problem because we could drop refs for blocks we know don't belong to
ours. If we crash or umount at the right time we could experience
messages such as the following when snapshot deletion resumes
BTRFS error (device dm-3): unable to find ref byte nr 66797568 parent 0 root 258 owner 1 offset 0
------------[ cut here ]------------
WARNING: CPU: 3 PID: 16052 at fs/btrfs/extent-tree.c:7108 __btrfs_free_extent.isra.78+0x62c/0xb30 [btrfs]
CPU: 3 PID: 16052 Comm: umount Tainted: G W OE 5.0.0-rc4+ #147
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011
RIP: 0010:__btrfs_free_extent.isra.78+0x62c/0xb30 [btrfs]
RSP: 0018:ffffc90005cd7b18 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: ffff88842fade680 RSI: ffff88842fad6b18 RDI: ffff88842fad6b18
RBP: ffffc90005cd7bc8 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000001 R11: ffffffff822696b8 R12: 0000000003fb4000
R13: 0000000000000001 R14: 0000000000000102 R15: ffff88819c9d67e0
FS: 00007f08bb138fc0(0000) GS:ffff88842fac0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8f5d861ea0 CR3: 00000003e99fe000 CR4: 00000000000006e0
Call Trace:
? _raw_spin_unlock+0x27/0x40
? btrfs_merge_delayed_refs+0x356/0x3e0 [btrfs]
__btrfs_run_delayed_refs+0x75a/0x13c0 [btrfs]
? join_transaction+0x2b/0x460 [btrfs]
btrfs_run_delayed_refs+0xf3/0x1c0 [btrfs]
btrfs_commit_transaction+0x52/0xa50 [btrfs]
? start_transaction+0xa6/0x510 [btrfs]
btrfs_sync_fs+0x79/0x1c0 [btrfs]
sync_filesystem+0x70/0x90
generic_shutdown_super+0x27/0x120
kill_anon_super+0x12/0x30
btrfs_kill_super+0x16/0xa0 [btrfs]
deactivate_locked_super+0x43/0x70
deactivate_super+0x40/0x60
cleanup_mnt+0x3f/0x80
__cleanup_mnt+0x12/0x20
task_work_run+0x8b/0xc0
exit_to_usermode_loop+0xce/0xd0
do_syscall_64+0x20b/0x210
entry_SYSCALL_64_after_hwframe+0x49/0xbe
To fix this simply mark dead roots we read from disk as DEAD and then
set the walk_control->restarted flag so we know we have a restarted
deletion. From here whenever we try to drop refs for blocks we check to
verify our ref is set on them, and if it is not we skip it. Once we
find a ref that is set we unset walk_control->restarted since the tree
should be in a normal state from then on, and any problems we run into
from there are different issues. I tested this with an existing broken
fs and my reproducer that creates a broken fs and it fixed both file
systems.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Btrfs/139 will fail with a high probability if the testing machine (VM)
has only 2G RAM.
Resulting the final write success while it should fail due to EDQUOT,
and the fs will have quota exceeding the limit by 16K.
The simplified reproducer will be: (needs a 2G ram VM)
$ mkfs.btrfs -f $dev
$ mount $dev $mnt
$ btrfs subv create $mnt/subv
$ btrfs quota enable $mnt
$ btrfs quota rescan -w $mnt
$ btrfs qgroup limit -e 1G $mnt/subv
$ for i in $(seq -w 1 8); do
xfs_io -f -c "pwrite 0 128M" $mnt/subv/file_$i > /dev/null
echo "file $i written" > /dev/kmsg
done
$ sync
$ btrfs qgroup show -pcre --raw $mnt
The last pwrite will not trigger EDQUOT and final 'qgroup show' will
show something like:
qgroupid rfer excl max_rfer max_excl parent child
-------- ---- ---- -------- -------- ------ -----
0/5 16384 16384 none none --- ---
0/256 1073758208 1073758208 none 1073741824 --- ---
And 1073758208 is larger than
> 1073741824.
[CAUSE]
It's a bug in btrfs qgroup data reserved space management.
For quota limit, we must ensure that:
reserved (data + metadata) + rfer/excl <= limit
Since rfer/excl is only updated at transaction commmit time, reserved
space needs to be taken special care.
One important part of reserved space is data, and for a new data extent
written to disk, we still need to take the reserved space until
rfer/excl numbers get updated.
Originally when an ordered extent finishes, we migrate the reserved
qgroup data space from extent_io tree to delayed ref head of the data
extent, expecting delayed ref will only be cleaned up at commit
transaction time.
However for small RAM machine, due to memory pressure dirty pages can be
flushed back to disk without committing a transaction.
The related events will be something like:
file 1 written
btrfs_finish_ordered_io: ino=258 ordered offset=0 len=54947840
btrfs_finish_ordered_io: ino=258 ordered offset=54947840 len=5636096
btrfs_finish_ordered_io: ino=258 ordered offset=61153280 len=57344
btrfs_finish_ordered_io: ino=258 ordered offset=61210624 len=8192
btrfs_finish_ordered_io: ino=258 ordered offset=60583936 len=569344
cleanup_ref_head: num_bytes=54947840
cleanup_ref_head: num_bytes=5636096
cleanup_ref_head: num_bytes=569344
cleanup_ref_head: num_bytes=57344
cleanup_ref_head: num_bytes=8192
^^^^^^^^^^^^^^^^ This will free qgroup data reserved space
file 2 written
...
file 8 written
cleanup_ref_head: num_bytes=8192
...
btrfs_commit_transaction <<< the only transaction committed during
the test
When file 2 is written, we have already freed 128M reserved qgroup data
space for ino 258. Thus later write won't trigger EDQUOT.
This allows us to write more data beyond qgroup limit.
In my 2G ram VM, it could reach about 1.2G before hitting EDQUOT.
[FIX]
By moving reserved qgroup data space from btrfs_delayed_ref_head to
btrfs_qgroup_extent_record, we can ensure that reserved qgroup data
space won't be freed half way before commit transaction, thus fix the
problem.
Fixes: f64d5ca868 ("btrfs: delayed_ref: Add new function to record reserved space into delayed ref")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no point in using a construct like 'if (!condition)
WARN_ON(1)'. Use WARN_ON(!condition) directly. No functional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For FLUSH_LIMIT flushers we really can only allocate chunks and flush
delayed inode items, everything else is problematic. I added a bunch of
new states and it lead to weirdness in the FLUSH_LIMIT case because I
forgot about how it worked. So instead explicitly declare the states
that are ok for flushing with FLUSH_LIMIT and use that for our state
machine. Then as we add new things that are safe we can just add them
to this list.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With severe fragmentation we can end up with our inode rsv size being
huge during writeout, which would cause us to need to make very large
metadata reservations.
However we may not actually need that much once writeout is complete,
because of the over-reservation for the worst case.
So instead try to make our reservation, and if we couldn't make it
re-calculate our new reservation size and try again. If our reservation
size doesn't change between tries then we know we are actually out of
space and can error. Flushing that could have been running in parallel
did not make any space.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ rename to calc_refill_bytes, update comment and changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
With the introduction of the per-inode block_rsv it became possible to
have really really large reservation requests made because of data
fragmentation. Since the ticket stuff assumed that we'd always have
relatively small reservation requests it just killed all tickets if we
were unable to satisfy the current request.
However, this is generally not the case anymore. So fix this logic to
instead see if we had a ticket that we were able to give some
reservation to, and if we were continue the flushing loop again.
Likewise we make the tickets use the space_info_add_old_bytes() method
of returning what reservation they did receive in hopes that it could
satisfy reservations down the line.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We've done this forever because of the voodoo around knowing how much
space we have. However, we have better ways of doing this now, and on
normal file systems we'll easily have a global reserve of 512MiB, and
since metadata chunks are usually 1GiB that means we'll allocate
metadata chunks more readily. Instead use the actual used amount when
determining if we need to allocate a chunk or not.
This has a side effect for mixed block group fs'es where we are no
longer allocating enough chunks for the data/metadata requirements. To
deal with this add a ALLOC_CHUNK_FORCE step to the flushing state
machine. This will only get used if we've already made a full loop
through the flushing machinery and tried committing the transaction.
If we have then we can try and force a chunk allocation since we likely
need it to make progress. This resolves issues I was seeing with
the mixed bg tests in xfstests without the new flushing state.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ merged with patch "add ALLOC_CHUNK_FORCE to the flushing code" ]
Signed-off-by: David Sterba <dsterba@suse.com>
For enospc_debug having the block rsvs is super helpful to see if we've
done something wrong.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
may_commit_transaction will skip committing the transaction if we don't
have enough pinned space or if we're trying to find space for a SYSTEM
chunk. However, if we have pending free block groups in this transaction
we still want to commit as we may be able to allocate a chunk to make
our reservation. So instead of just returning ENOSPC, check if we have
free block groups pending, and if so commit the transaction to allow us
to use that free space.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The throttle path doesn't take cleaner_delayed_iput_mutex, which means
we could think we're done flushing iputs in the data space reservation
path when we could have a throttler doing an iput. There's no real
reason to serialize the delayed iput flushing, so instead of taking the
cleaner_delayed_iput_mutex whenever we flush the delayed iputs just
replace it with an atomic counter and a waitqueue. This removes the
short (or long depending on how big the inode is) window where we think
there are no more pending iputs when there really are some.
The waiting is killable as it could be indirectly called from user
operations like fallocate or zero-range. Such call sites should handle
the error but otherwise it's not necessary. Eg. flush_space just needs
to attempt to make space by waiting on iputs.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add killable comment and changelog parts ]
Signed-off-by: David Sterba <dsterba@suse.com>
Since inc_block_group_ro() would return -ENOSPC, outputting debug info
for enospc_debug mount option would be helpful to debug some balance
false ENOSPC report.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_set_lock_blocking is now only a simple wrapper around
btrfs_set_lock_blocking_write. The name does not bring any semantic
value that could not be inferred from the new function so there's no
point keeping it.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The first thing we do is loop through the list, this
if (!list_empty())
btrfs_create_pending_block_groups();
thing is just wasted space.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a couple of comments regarding the logic flow in shrink_delalloc.
Then, cease using max_reclaim as a temporary variable when calculating
nr_pages. Finally give max_reclaim a more becoming name, which
uneqivocally shows at what this variable really holds. No functional
changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Delayed iputs means we can have final iputs of deleted inodes in the
queue, which could potentially generate a lot of pinned space that could
be free'd. So before we decide to commit the transaction for ENOPSC
reasons, run the delayed iputs so that any potential space is free'd up.
If there is and we freed enough we can then commit the transaction and
potentially be able to make our reservation.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The typos accumulate over time so once in a while time they get fixed in
a large patch.
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With my delayed refs patches in place we started seeing a large amount
of aborts in __btrfs_free_extent:
BTRFS error (device sdb1): unable to find ref byte nr 91947008 parent 0 root 35964 owner 1 offset 0
Call Trace:
? btrfs_merge_delayed_refs+0xaf/0x340
__btrfs_run_delayed_refs+0x6ea/0xfc0
? btrfs_set_path_blocking+0x31/0x60
btrfs_run_delayed_refs+0xeb/0x180
btrfs_commit_transaction+0x179/0x7f0
? btrfs_check_space_for_delayed_refs+0x30/0x50
? should_end_transaction.isra.19+0xe/0x40
btrfs_drop_snapshot+0x41c/0x7c0
btrfs_clean_one_deleted_snapshot+0xb5/0xd0
cleaner_kthread+0xf6/0x120
kthread+0xf8/0x130
? btree_invalidatepage+0x90/0x90
? kthread_bind+0x10/0x10
ret_from_fork+0x35/0x40
This was because btrfs_drop_snapshot depends on the root not being
modified while it's dropping the snapshot. It will unlock the root node
(and really every node) as it walks down the tree, only to re-lock it
when it needs to do something. This is a problem because if we modify
the tree we could cow a block in our path, which frees our reference to
that block. Then once we get back to that shared block we'll free our
reference to it again, and get ENOENT when trying to lookup our extent
reference to that block in __btrfs_free_extent.
This is ultimately happening because we have delayed items left to be
processed for our deleted snapshot _after_ all of the inodes are closed
for the snapshot. We only run the delayed inode item if we're deleting
the inode, and even then we do not run the delayed insertions or delayed
removals. These can be run at any point after our final inode does its
last iput, which is what triggers the snapshot deletion. We can end up
with the snapshot deletion happening and then have the delayed items run
on that file system, resulting in the above problem.
This problem has existed forever, however my patches made it much easier
to hit as I wake up the cleaner much more often to deal with delayed
iputs, which made us more likely to start the snapshot dropping work
before the transaction commits, which is when the delayed items would
generally be run. Before, generally speaking, we would run the delayed
items, commit the transaction, and wakeup the cleaner thread to start
deleting snapshots, which means we were less likely to hit this problem.
You could still hit it if you had multiple snapshots to be deleted and
ended up with lots of delayed items, but it was definitely harder.
Fix for now by simply running all the delayed items before starting to
drop the snapshot. We could make this smarter in the future by making
the delayed items per-root, and then simply drop any delayed items for
roots that we are going to delete. But for now just a quick and easy
solution is the safest.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When debugging some weird extent reference bug I suspected that we were
changing a snapshot while we were deleting it, which could explain my
bug. This was indeed what was happening, and this patch helped me
verify my theory. It is never correct to modify the snapshot once it's
being deleted, so mark the root when we are deleting it and make sure we
complain about it when it happens.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
@blocksize variable in do_walk_down() is only used once, really no need
to declare it.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now with the delayed_refs_rsv we can now know exactly how much pending
delayed refs space we need. This means we can drastically simplify
btrfs_check_space_for_delayed_refs by simply checking how much space we
have reserved for the global rsv (which acts as a spill over buffer) and
the delayed refs rsv. If our total size is beyond that amount then we
know it's time to commit the transaction and stop any more delayed refs
from being generated.
With the introduction of dealyed_refs_rsv infrastructure, namely
btrfs_update_delayed_refs_rsv we now know exactly how much pending
delayed refs space is required.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A nice thing we gain with the delayed refs rsv is the ability to flush
the delayed refs on demand to deal with enospc pressure. Add states to
flush delayed refs on demand, and this will allow us to remove a lot of
ad-hoc work around checking to see if we should commit the transaction
to run our delayed refs.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Any space used in the delayed_refs_rsv will be freed up by a transaction
commit, so instead of just counting the pinned space we also need to
account for any space in the delayed_refs_rsv when deciding if it will
make a different to commit the transaction to satisfy our space
reservation. If we have enough bytes to satisfy our reservation ticket
then we are good to go, otherwise subtract out what space we would gain
back by committing the transaction and compare that against the pinned
space to make our decision.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Traditionally we've had voodoo in btrfs to account for the space that
delayed refs may take up by having a global_block_rsv. This works most
of the time, except when it doesn't. We've had issues reported and seen
in production where sometimes the global reserve is exhausted during
transaction commit before we can run all of our delayed refs, resulting
in an aborted transaction. Because of this voodoo we have equally
dubious flushing semantics around throttling delayed refs which we often
get wrong.
So instead give them their own block_rsv. This way we can always know
exactly how much outstanding space we need for delayed refs. This
allows us to make sure we are constantly filling that reservation up
with space, and allows us to put more precise pressure on the enospc
system. Instead of doing math to see if its a good time to throttle,
the normal enospc code will be invoked if we have a lot of delayed refs
pending, and they will be run via the normal flushing mechanism.
For now the delayed_refs_rsv will hold the reservations for the delayed
refs, the block group updates, and deleting csums. We could have a
separate rsv for the block group updates, but the csum deletion stuff is
still handled via the delayed_refs so that will stay there.
Historical background:
The global reserve has grown to cover everything we don't reserve space
explicitly for, and we've grown a lot of weird ad-hoc heuristics to know
if we're running short on space and when it's time to force a commit. A
failure rate of 20-40 file systems when we run hundreds of thousands of
them isn't super high, but cleaning up this code will make things less
ugly and more predictible.
Thus the delayed refs rsv. We always know how many delayed refs we have
outstanding, and although running them generates more we can use the
global reserve for that spill over, which fits better into it's desired
use than a full blown reservation. This first approach is to simply
take how many times we're reserving space for and multiply that by 2 in
order to save enough space for the delayed refs that could be generated.
This is a niave approach and will probably evolve, but for now it works.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com> # high-level review
[ added background notes from the cover letter ]
Signed-off-by: David Sterba <dsterba@suse.com>
The cleanup_extent_op function actually would run the extent_op if it
needed running, which made the name sort of a misnomer. Change it to
run_and_cleanup_extent_op, and move the actual cleanup work to
cleanup_extent_op so it can be used by check_ref_cleanup() in order to
unify the extent op handling.
Reviewed-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We were missing some quota cleanups in check_ref_cleanup, so break the
ref head accounting cleanup into a helper and call that from both
check_ref_cleanup and cleanup_ref_head. This will hopefully ensure that
we don't screw up accounting in the future for other things that we add.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We do this dance in cleanup_ref_head and check_ref_cleanup, unify it
into a helper and cleanup the calling functions.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can have a lot freed extents during the life span of transaction, so
the red black tree that keeps track of the ranges of each freed extent
(fs_info->freed_extents[]) can get quite big. When finishing a
transaction commit we find each range, process it (discard the extents,
unpin them) and then remove it from the red black tree.
We can use an extent state record as a cache when searching for a range,
so that when we clean the range we can use the cached extent state we
passed to the search function instead of iterating the red black tree
again. Doing things as fast as possible when finishing a transaction (in
state TRANS_STATE_UNBLOCKED) is convenient as it reduces the time we
block another task that wants to commit the next transaction.
So change clear_extent_dirty() to allow an optional extent state record to
be passed as an argument, which will be passed down to __clear_extent_bit.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_fs_info structure contains a copy of the
fsid/metadata_uuid fields. Same values are also contained in the
btrfs_fs_devices structure which fs_info has a reference to. Let's
reduce duplication by removing the fields from fs_info and always refer
to the ones in fs_devices. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This field is going to be used when the user wants to change the UUID
of the filesystem without having to rewrite all metadata blocks. This
field adds another level of indirection such that when the FSID is
changed what really happens is the current UUID (the one with which the
fs was created) is copied to the 'metadata_uuid' field in the superblock
as well as a new incompat flag is set METADATA_UUID. When the kernel
detects this flag is set it knows that the superblock in fact has 2
UUIDs:
1. Is the UUID which is user-visible, currently known as FSID.
2. Metadata UUID - this is the UUID which is stamped into all on-disk
datastructures belonging to this file system.
When the new incompat flag is present device scanning checks whether
both fsid/metadata_uuid of the scanned device match any of the
registered filesystems. When the flag is not set then both UUIDs are
equal and only the FSID is retained on disk, metadata_uuid is set only
in-memory during mount.
Additionally a new metadata_uuid field is also added to the fs_info
struct. It's initialised either with the FSID in case METADATA_UUID
incompat flag is not set or with the metdata_uuid of the superblock
otherwise.
This commit introduces the new fields as well as the new incompat flag
and switches all users of the fsid to the new logic.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor updates in comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
We have a complex loop design for find_free_extent(), that has different
behavior for each loop, some even includes new chunk allocation.
Instead of putting such a long code into find_free_extent() and makes it
harder to read, just extract them into find_free_extent_update_loop().
With all the cleanups, the main find_free_extent() should be pretty
barebone:
find_free_extent()
|- Iterate through all block groups
| |- Get a valid block group
| |- Try to do clustered allocation in that block group
| |- Try to do unclustered allocation in that block group
| |- Check if the result is valid
| | |- If valid, then exit
| |- Jump to next block group
|
|- Push harder to find free extents
|- If not found, re-iterate all block groups
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
[ copy callchain from changelog to function comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
This patch will extract unclsutered extent allocation code into
find_free_extent_unclustered().
And this helper function will use return value to indicate what to do
next.
This should make find_free_extent() a little easier to read.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
[Update merge conflict with fb5c39d7a8 ("btrfs: don't use ctl->free_space for max_extent_size")]
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have two main methods to find free extents inside a block group:
1) clustered allocation
2) unclustered allocation
This patch will extract the clustered allocation into
find_free_extent_clustered() to make it a little easier to read.
Instead of jumping between different labels in find_free_extent(), the
helper function will use return value to indicate different behavior.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of tons of different local variables in find_free_extent(),
extract them into find_free_extent_ctl structure, and add better
explanation for them.
Some modification may looks redundant, but will later greatly simplify
function parameter list during find_free_extent() refactor.
Also add two comments to co-operate with fb5c39d7a8 ("btrfs: don't use
ctl->free_space for max_extent_size"), to make ffe_ctl->max_extent_size
update more reader-friendly.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new wrapper update_bytes_pinned to replace open coded
bytes_pinned modifiers. Now the underflows of space_info::bytes_pinned
get detected and reported.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although we have space_info::bytes_may_use underflow detection in
btrfs_free_reserved_data_space_noquota(), we have more callers who are
subtracting number from space_info::bytes_may_use.
So instead of doing underflow detection for every caller, introduce a
new wrapper update_bytes_may_use() to replace open coded bytes_may_use
modifiers.
This also introduce a macro to declare more wrappers, but currently
space_info::bytes_may_use is the mostly interesting one.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We were not handling the reserved byte accounting properly for data
references. Metadata was fine, if it errored out the error paths would
free the bytes_reserved count and pin the extent, but it even missed one
of the error cases. So instead move this handling up into
run_one_delayed_ref so we are sure that both cases are properly cleaned
up in case of a transaction abort.
CC: stable@vger.kernel.org # 4.18+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
max_extent_size is supposed to be the largest contiguous range for the
space info, and ctl->free_space is the total free space in the block
group. We need to keep track of these separately and _only_ use the
max_free_space if we don't have a max_extent_size, as that means our
original request was too large to search any of the block groups for and
therefore wouldn't have a max_extent_size set.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we use up our block group before allocating a new one we'll easily
get a max_extent_size that's set really really low, which will result in
a lot of fragmentation. We need to make sure we're resetting the
max_extent_size when we add a new chunk or add new space.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When writing out a block group free space cache we can end deadlocking
with ourselves on an extent buffer lock resulting in a warning like the
following:
[245043.379979] WARNING: CPU: 4 PID: 2608 at fs/btrfs/locking.c:251 btrfs_tree_lock+0x1be/0x1d0 [btrfs]
[245043.392792] CPU: 4 PID: 2608 Comm: btrfs-transacti Tainted: G
W I 4.16.8 #1
[245043.395489] RIP: 0010:btrfs_tree_lock+0x1be/0x1d0 [btrfs]
[245043.396791] RSP: 0018:ffffc9000424b840 EFLAGS: 00010246
[245043.398093] RAX: 0000000000000a30 RBX: ffff8807e20a3d20 RCX: 0000000000000001
[245043.399414] RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff8807e20a3d20
[245043.400732] RBP: 0000000000000001 R08: ffff88041f39a700 R09: ffff880000000000
[245043.402021] R10: 0000000000000040 R11: ffff8807e20a3d20 R12: ffff8807cb220630
[245043.403296] R13: 0000000000000001 R14: ffff8807cb220628 R15: ffff88041fbdf000
[245043.404780] FS: 0000000000000000(0000) GS:ffff88082fc80000(0000) knlGS:0000000000000000
[245043.406050] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[245043.407321] CR2: 00007fffdbdb9f10 CR3: 0000000001c09005 CR4: 00000000000206e0
[245043.408670] Call Trace:
[245043.409977] btrfs_search_slot+0x761/0xa60 [btrfs]
[245043.411278] btrfs_insert_empty_items+0x62/0xb0 [btrfs]
[245043.412572] btrfs_insert_item+0x5b/0xc0 [btrfs]
[245043.413922] btrfs_create_pending_block_groups+0xfb/0x1e0 [btrfs]
[245043.415216] do_chunk_alloc+0x1e5/0x2a0 [btrfs]
[245043.416487] find_free_extent+0xcd0/0xf60 [btrfs]
[245043.417813] btrfs_reserve_extent+0x96/0x1e0 [btrfs]
[245043.419105] btrfs_alloc_tree_block+0xfb/0x4a0 [btrfs]
[245043.420378] __btrfs_cow_block+0x127/0x550 [btrfs]
[245043.421652] btrfs_cow_block+0xee/0x190 [btrfs]
[245043.422979] btrfs_search_slot+0x227/0xa60 [btrfs]
[245043.424279] ? btrfs_update_inode_item+0x59/0x100 [btrfs]
[245043.425538] ? iput+0x72/0x1e0
[245043.426798] write_one_cache_group.isra.49+0x20/0x90 [btrfs]
[245043.428131] btrfs_start_dirty_block_groups+0x102/0x420 [btrfs]
[245043.429419] btrfs_commit_transaction+0x11b/0x880 [btrfs]
[245043.430712] ? start_transaction+0x8e/0x410 [btrfs]
[245043.432006] transaction_kthread+0x184/0x1a0 [btrfs]
[245043.433341] kthread+0xf0/0x130
[245043.434628] ? btrfs_cleanup_transaction+0x4e0/0x4e0 [btrfs]
[245043.435928] ? kthread_create_worker_on_cpu+0x40/0x40
[245043.437236] ret_from_fork+0x1f/0x30
[245043.441054] ---[ end trace 15abaa2aaf36827f ]---
This is because at write_one_cache_group() when we are COWing a leaf from
the extent tree we end up allocating a new block group (chunk) and,
because we have hit a threshold on the number of bytes reserved for system
chunks, we attempt to finalize the creation of new block groups from the
current transaction, by calling btrfs_create_pending_block_groups().
However here we also need to modify the extent tree in order to insert
a block group item, and if the location for this new block group item
happens to be in the same leaf that we were COWing earlier, we deadlock
since btrfs_search_slot() tries to write lock the extent buffer that we
locked before at write_one_cache_group().
We have already hit similar cases in the past and commit d9a0540a79
("Btrfs: fix deadlock when finalizing block group creation") fixed some
of those cases by delaying the creation of pending block groups at the
known specific spots that could lead to a deadlock. This change reworks
that commit to be more generic so that we don't have to add similar logic
to every possible path that can lead to a deadlock. This is done by
making __btrfs_cow_block() disallowing the creation of new block groups
(setting the transaction's can_flush_pending_bgs to false) before it
attempts to allocate a new extent buffer for either the extent, chunk or
device trees, since those are the trees that pending block creation
modifies. Once the new extent buffer is allocated, it allows creation of
pending block groups to happen again.
This change depends on a recent patch from Josef which is not yet in
Linus' tree, named "btrfs: make sure we create all new block groups" in
order to avoid occasional warnings at btrfs_trans_release_chunk_metadata().
Fixes: d9a0540a79 ("Btrfs: fix deadlock when finalizing block group creation")
CC: stable@vger.kernel.org # 4.4+
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199753
Link: https://lore.kernel.org/linux-btrfs/CAJtFHUTHna09ST-_EEiyWmDH6gAqS6wa=zMNMBsifj8ABu99cw@mail.gmail.com/
Reported-by: E V <eliventer@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The avg_delayed_ref_runtime can be referenced from the transaction
handle.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It can be referenced from the transaction handle.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since trans is only used for referring to delayed_refs, there is no need
to pass it instead of delayed_refs to btrfs_delayed_ref_lock().
No functional change.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since trans is only used for referring to delayed_refs, there is no need
to pass it instead of delayed_refs to btrfs_select_ref_head(). No
functional change.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Allocating new chunks modifies both the extent and chunk tree, which can
trigger new chunk allocations. So instead of doing list_for_each_safe,
just do while (!list_empty()) so we make sure we don't exit with other
pending bg's still on our list.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reloc tree doesn't contribute to qgroup numbers, as we have accounted
them at balance time (see replace_path()).
Skipping the unneeded subtree tracing should reduce the overhead.
[[Benchmark]]
Hardware:
VM 4G vRAM, 8 vCPUs,
disk is using 'unsafe' cache mode,
backing device is SAMSUNG 850 evo SSD.
Host has 16G ram.
Mkfs parameter:
--nodesize 4K (To bump up tree size)
Initial subvolume contents:
4G data copied from /usr and /lib.
(With enough regular small files)
Snapshots:
16 snapshots of the original subvolume.
each snapshot has 3 random files modified.
balance parameter:
-m
So the content should be pretty similar to a real world root fs layout.
| v4.19-rc1 | w/ patchset | diff (*)
---------------------------------------------------------------
relocated extents | 22929 | 22900 | -0.1%
qgroup dirty extents | 227757 | 167139 | -26.6%
time (sys) | 65.253s | 50.123s | -23.2%
time (real) | 74.032s | 52.551s | -29.0%
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Refactor the delayed refs loop by using the newly introduced
btrfs_run_delayed_refs_for_head function. This greatly simplifies
__btrfs_run_delayed_refs and makes it more obvious what is happening.
We now have 1 loop which iterates the existing delayed_heads and then
each selected ref head is processed by the new helper. All existing
semantics of the code are preserved so no functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
