[ 3934.173244] ======================================================
[ 3934.179572] WARNING: possible circular locking dependency detected
[ 3934.185884] 5.4.21-xfstests #1 Not tainted
[ 3934.190151] ------------------------------------------------------
[ 3934.196673] dmsetup/8897 is trying to acquire lock:
[ 3934.201688] ffffffffbce82b18 (shrinker_rwsem){++++}, at: unregister_shrinker+0x22/0x80
[ 3934.210268]
but task is already holding lock:
[ 3934.216489] ffff92a10cc5e1d0 (&pmd->root_lock){++++}, at: dm_pool_metadata_close+0xba/0x120
[ 3934.225083]
which lock already depends on the new lock.
[ 3934.564165] Chain exists of:
shrinker_rwsem --> &journal->j_checkpoint_mutex --> &pmd->root_lock
For a more detailed lockdep report, please see:
https://lore.kernel.org/r/20200220234519.GA620489@mit.edu
We shouldn't need to hold the lock while are just tearing down and
freeing the whole metadata pool structure.
Fixes: 44d8ebf436 ("dm thin metadata: use pool locking at end of dm_pool_metadata_close")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The crash can be reproduced by running the lvm2 testsuite test
lvconvert-thin-external-cache.sh for several minutes, e.g.:
while :; do make check T=shell/lvconvert-thin-external-cache.sh; done
The crash happens in this call chain:
do_waker -> policy_tick -> smq_tick -> end_hotspot_period -> clear_bitset
-> memset -> __memset -- which accesses an invalid pointer in the vmalloc
area.
The work entry on the workqueue is executed even after the bitmap was
freed. The problem is that cancel_delayed_work doesn't wait for the
running work item to finish, so the work item can continue running and
re-submitting itself even after cache_postsuspend. In order to make sure
that the work item won't be running, we must use cancel_delayed_work_sync.
Also, change flush_workqueue to drain_workqueue, so that if some work item
submits itself or another work item, we are properly waiting for both of
them.
Fixes: c6b4fcbad0 ("dm: add cache target")
Cc: stable@vger.kernel.org # v3.9
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If the flag SB_FLAG_RECALCULATE is present in the superblock, but it was
not specified on the command line (i.e. ic->recalculate_flag is false),
dm-integrity would return invalid table line - the reported number of
arguments would not match the real number.
Fixes: 468dfca38b ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Ondrej Kozina <okozina@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If we need to perform synchronous I/O in dm_integrity_map_continue(),
we must make sure that we are not in the map function - in order to
avoid the deadlock due to bio queuing in generic_make_request. To
avoid the deadlock, we offload the request to metadata_wq.
However, metadata_wq also processes metadata updates for write requests.
If there are too many requests that get offloaded to metadata_wq at the
beginning of dm_integrity_map_continue, the workqueue metadata_wq
becomes clogged and the system is incapable of processing any metadata
updates.
This causes a deadlock because all the requests that need to do metadata
updates wait for metadata_wq to proceed and metadata_wq waits inside
wait_and_add_new_range until some existing request releases its range
lock (which doesn't happen because the range lock is released after
metadata update).
In order to fix the deadlock, we create a new workqueue offload_wq and
offload requests to it - so that processing of offload_wq is independent
from processing of metadata_wq.
Fixes: 7eada909bf ("dm: add integrity target")
Cc: stable@vger.kernel.org # v4.12+
Reported-by: Heinz Mauelshagen <heinzm@redhat.com>
Tested-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If we resume a device in bitmap mode and the on-disk format is in journal
mode, we must recalculate anything above ic->sb->recalc_sector. Otherwise,
there would be non-recalculated blocks which would cause I/O errors.
Fixes: 468dfca38b ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-----BEGIN PGP SIGNATURE-----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=jy10
-----END PGP SIGNATURE-----
Merge tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Not a lot here, which is great, basically just three small bcache
fixes from Coly, and four NVMe fixes via Keith"
* tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block:
nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info
nvme/pci: move cqe check after device shutdown
nvme: prevent warning triggered by nvme_stop_keep_alive
nvme/tcp: fix bug on double requeue when send fails
bcache: remove macro nr_to_fifo_front()
bcache: Revert "bcache: shrink btree node cache after bch_btree_check()"
bcache: ignore pending signals when creating gc and allocator thread
Macro nr_to_fifo_front() is only used once in btree_flush_write(),
it is unncessary indeed. This patch removes this macro and does
calculation directly in place.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 1df3877ff6.
In my testing, sometimes even all the cached btree nodes are freed,
creating gc and allocator kernel threads may still fail. Finally it
turns out that kthread_run() may fail if there is pending signal for
current task. And the pending signal is sent from OOM killer which
is triggered by memory consuption in bch_btree_check().
Therefore explicitly shrinking bcache btree node here does not help,
and after the shrinker callback is improved, as well as pending signals
are ignored before creating kernel threads, now such operation is
unncessary anymore.
This patch reverts the commit 1df3877ff6 ("bcache: shrink btree node
cache after bch_btree_check()") because we have better improvement now.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When run a cache set, all the bcache btree node of this cache set will
be checked by bch_btree_check(). If the bcache btree is very large,
iterating all the btree nodes will occupy too much system memory and
the bcache registering process might be selected and killed by system
OOM killer. kthread_run() will fail if current process has pending
signal, therefore the kthread creating in run_cache_set() for gc and
allocator kernel threads are very probably failed for a very large
bcache btree.
Indeed such OOM is safe and the registering process will exit after
the registration done. Therefore this patch flushes pending signals
during the cache set start up, specificly in bch_cache_allocator_start()
and bch_gc_thread_start(), to make sure run_cache_set() won't fail for
large cahced data set.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull misc vfs updates from Al Viro:
- bmap series from cmaiolino
- getting rid of convolutions in copy_mount_options() (use a couple of
copy_from_user() instead of the __get_user() crap)
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
saner copy_mount_options()
fibmap: Reject negative block numbers
fibmap: Use bmap instead of ->bmap method in ioctl_fibmap
ecryptfs: drop direct calls to ->bmap
cachefiles: drop direct usage of ->bmap method.
fs: Enable bmap() function to properly return errors
-----BEGIN PGP SIGNATURE-----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=05d8
-----END PGP SIGNATURE-----
Merge tag 'block-5.6-2020-02-05' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"Some later arrivals, but all fixes at this point:
- bcache fix series (Coly)
- Series of BFQ fixes (Paolo)
- NVMe pull request from Keith with a few minor NVMe fixes
- Various little tweaks"
* tag 'block-5.6-2020-02-05' of git://git.kernel.dk/linux-block: (23 commits)
nvmet: update AEN list and array at one place
nvmet: Fix controller use after free
nvmet: Fix error print message at nvmet_install_queue function
brd: check and limit max_part par
nvme-pci: remove nvmeq->tags
nvmet: fix dsm failure when payload does not match sgl descriptor
nvmet: Pass lockdep expression to RCU lists
block, bfq: clarify the goal of bfq_split_bfqq()
block, bfq: get a ref to a group when adding it to a service tree
block, bfq: remove ifdefs from around gets/puts of bfq groups
block, bfq: extend incomplete name of field on_st
block, bfq: get extra ref to prevent a queue from being freed during a group move
block, bfq: do not insert oom queue into position tree
block, bfq: do not plug I/O for bfq_queues with no proc refs
bcache: check return value of prio_read()
bcache: fix incorrect data type usage in btree_flush_write()
bcache: add readahead cache policy options via sysfs interface
bcache: explicity type cast in bset_bkey_last()
bcache: fix memory corruption in bch_cache_accounting_clear()
xen/blkfront: limit allocated memory size to actual use case
...
By now, bmap() will either return the physical block number related to
the requested file offset or 0 in case of error or the requested offset
maps into a hole.
This patch makes the needed changes to enable bmap() to proper return
errors, using the return value as an error return, and now, a pointer
must be passed to bmap() to be filled with the mapped physical block.
It will change the behavior of bmap() on return:
- negative value in case of error
- zero on success or map fell into a hole
In case of a hole, the *block will be zero too
Since this is a prep patch, by now, the only error return is -EINVAL if
->bmap doesn't exist.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now if prio_read() failed during starting a cache set, we can print
out error message in run_cache_set() and handle the failure properly.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dan Carpenter points out that from commit 2aa8c52938 ("bcache: avoid
unnecessary btree nodes flushing in btree_flush_write()"), there is a
incorrect data type usage which leads to the following static checker
warning:
drivers/md/bcache/journal.c:444 btree_flush_write()
warn: 'ref_nr' unsigned <= 0
drivers/md/bcache/journal.c
422 static void btree_flush_write(struct cache_set *c)
423 {
424 struct btree *b, *t, *btree_nodes[BTREE_FLUSH_NR];
425 unsigned int i, nr, ref_nr;
^^^^^^
426 atomic_t *fifo_front_p, *now_fifo_front_p;
427 size_t mask;
428
429 if (c->journal.btree_flushing)
430 return;
431
432 spin_lock(&c->journal.flush_write_lock);
433 if (c->journal.btree_flushing) {
434 spin_unlock(&c->journal.flush_write_lock);
435 return;
436 }
437 c->journal.btree_flushing = true;
438 spin_unlock(&c->journal.flush_write_lock);
439
440 /* get the oldest journal entry and check its refcount */
441 spin_lock(&c->journal.lock);
442 fifo_front_p = &fifo_front(&c->journal.pin);
443 ref_nr = atomic_read(fifo_front_p);
444 if (ref_nr <= 0) {
^^^^^^^^^^^
Unsigned can't be less than zero.
445 /*
446 * do nothing if no btree node references
447 * the oldest journal entry
448 */
449 spin_unlock(&c->journal.lock);
450 goto out;
451 }
452 spin_unlock(&c->journal.lock);
As the warning information indicates, local varaible ref_nr in unsigned
int type is wrong, which does not matche atomic_read() and the "<= 0"
checking.
This patch fixes the above error by defining local variable ref_nr as
int type.
Fixes: 2aa8c52938 ("bcache: avoid unnecessary btree nodes flushing in btree_flush_write()")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In year 2007 high performance SSD was still expensive, in order to
save more space for real workload or meta data, the readahead I/Os
for non-meta data was bypassed and not cached on SSD.
In now days, SSD price drops a lot and people can find larger size
SSD with more comfortable price. It is unncessary to alway bypass
normal readahead I/Os to save SSD space for now.
This patch adds options for readahead data cache policies via sysfs
file /sys/block/bcache<N>/readahead_cache_policy, the options are,
- "all": cache all readahead data I/Os.
- "meta-only": only cache meta data, and bypass other regular I/Os.
If users want to make bcache continue to only cache readahead request
for metadata and bypass regular data readahead, please set "meta-only"
to this sysfs file. By default, bcache will back to cache all read-
ahead requests now.
Cc: stable@vger.kernel.org
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In bset.h, macro bset_bkey_last() is defined as,
bkey_idx((struct bkey *) (i)->d, (i)->keys)
Parameter i can be variable type of data structure, the macro always
works once the type of struct i has member 'd' and 'keys'.
bset_bkey_last() is also used in macro csum_set() to calculate the
checksum of a on-disk data structure. When csum_set() is used to
calculate checksum of on-disk bcache super block, the parameter 'i'
data type is struct cache_sb_disk. Inside struct cache_sb_disk (also in
struct cache_sb) the member keys is __u16 type. But bkey_idx() expects
unsigned int (a 32bit width), so there is problem when sending
parameters via stack to call bkey_idx().
Sparse tool from Intel 0day kbuild system reports this incompatible
problem. bkey_idx() is part of user space API, so the simplest fix is
to cast the (i)->keys to unsigned int type in macro bset_bkey_last().
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
unlikely case that a DM device is created without a DM table and
then accessed due to upper-layer userspace code or user error.
- Fix DM thin-provisioning's metadata_pre_commit_callback to not use
memory after it is free'd. Also refactor code to disallow changing
the thin-pool's data device once in use -- doing so guarantees smae
lifetime of pool's data device relative to the pool metadata.
- Fix DM space maps used by DM thinp and DM cache to avoid reuse of a
already used block. This race was identified with extremely heavy
snapshot use in the context of DM thin provisioning.
- Fix DM raid's table status relative to an active rebuild.
- Fix DM crypt to use GFP_NOIO rather than GFP_NOFS in call to
skcipher_request_alloc(). Also fix benbi IV constructor crash if
used in authenticated mode.
- Add DM crypt support for Elephant diffuser to allow for Bitlocker
compatibility.
- Fix DM verity target to not prefetch hash blocks for data that has
already been verified.
- Fix DM writecache's incorrect flush sequence during commit when in
SSD mode.
- Improve DM writecache's sequential write performance on SSDs.
- Add DM zoned target support for zone sizes smaller than 128MiB.
- Add DM multipath 'queue_if_no_path_timeout_secs' module param to
allow timeout if path isn't reinstated. This allows users a kernel
safety-net against IO hanging indefinitely, due to no active paths,
that has historically only been provided by multipathd userspace.
- Various DM code cleanups to use true/false rather than 1/0, a
variable rename in dm-dust, and fix for a math error in comment for
DM thin metadata's ondisk format.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl4xvEITHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWipYCAC+sX8q/XBDRi4WDCTvCRCcBfz9g9ZO
oygimV64oYf08JiDL54Z29T0EjwGR6DcZB0nEyjhl2/lU4bPwd4kLc/VHwjf44ay
oUJWZxp8Az7pIWjQQ5oC09it8gLmDpBdq2Z146tEDgYrERnH8BgDObYm3ihXwi9f
zMoET8rIzNltMUo6jIumjzxPcLbBsRTnC35mE//PZkMiUUI3ucNWuOhD/ICDe/Tu
VQ9rNtJx01xs07bFKT4OYR2Oc7xrtWEOMDKeSFz16j8t28wywLFz3EPXRG7tKM3l
6CKBFdRqPSL6v2Mr1QD8YwJJCPLsCoOQ14aKn2sDPG8EgQMnh7R2g6OT
=mfnM
-----END PGP SIGNATURE-----
Merge tag 'for-5.6/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM core's potential for q->make_request_fn NULL pointer in the
unlikely case that a DM device is created without a DM table and then
accessed due to upper-layer userspace code or user error.
- Fix DM thin-provisioning's metadata_pre_commit_callback to not use
memory after it is free'd. Also refactor code to disallow changing
the thin-pool's data device once in use -- doing so guarantees smae
lifetime of pool's data device relative to the pool metadata.
- Fix DM space maps used by DM thinp and DM cache to avoid reuse of a
already used block. This race was identified with extremely heavy
snapshot use in the context of DM thin provisioning.
- Fix DM raid's table status relative to an active rebuild.
- Fix DM crypt to use GFP_NOIO rather than GFP_NOFS in call to
skcipher_request_alloc(). Also fix benbi IV constructor crash if used
in authenticated mode.
- Add DM crypt support for Elephant diffuser to allow for Bitlocker
compatibility.
- Fix DM verity target to not prefetch hash blocks for data that has
already been verified.
- Fix DM writecache's incorrect flush sequence during commit when in
SSD mode.
- Improve DM writecache's sequential write performance on SSDs.
- Add DM zoned target support for zone sizes smaller than 128MiB.
- Add DM multipath 'queue_if_no_path_timeout_secs' module param to
allow timeout if path isn't reinstated. This allows users a kernel
safety-net against IO hanging indefinitely, due to no active paths,
that has historically only been provided by multipathd userspace.
- Various DM code cleanups to use true/false rather than 1/0, a
variable rename in dm-dust, and fix for a math error in comment for
DM thin metadata's ondisk format.
* tag 'for-5.6/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (21 commits)
dm: fix potential for q->make_request_fn NULL pointer
dm writecache: improve performance of large linear writes on SSDs
dm mpath: Add timeout mechanism for queue_if_no_path
dm thin: change data device's flush_bio to be member of struct pool
dm thin: don't allow changing data device during thin-pool reload
dm thin: fix use-after-free in metadata_pre_commit_callback
dm thin metadata: use pool locking at end of dm_pool_metadata_close
dm writecache: fix incorrect flush sequence when doing SSD mode commit
dm crypt: fix benbi IV constructor crash if used in authenticated mode
dm crypt: Implement Elephant diffuser for Bitlocker compatibility
dm space map common: fix to ensure new block isn't already in use
dm verity: don't prefetch hash blocks for already-verified data
dm crypt: fix GFP flags passed to skcipher_request_alloc()
dm thin metadata: Fix trivial math error in on-disk format documentation
dm thin metadata: use true/false for bool variable
dm snapshot: use true/false for bool variable
dm bio prison v2: use true/false for bool variable
dm mpath: use true/false for bool variable
dm zoned: support zone sizes smaller than 128MiB
dm raid: table line rebuild status fixes
...
-----BEGIN PGP SIGNATURE-----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=Us3h
-----END PGP SIGNATURE-----
Merge tag 'for-5.6/drivers-2020-01-27' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Like the core side, not a lot of changes here, just two main items:
- Series of patches (via Coly) with fixes for bcache (Coly,
Christoph)
- MD pull request from Song"
* tag 'for-5.6/drivers-2020-01-27' of git://git.kernel.dk/linux-block: (31 commits)
bcache: reap from tail of c->btree_cache in bch_mca_scan()
bcache: reap c->btree_cache_freeable from the tail in bch_mca_scan()
bcache: remove member accessed from struct btree
bcache: print written and keys in trace_bcache_btree_write
bcache: avoid unnecessary btree nodes flushing in btree_flush_write()
bcache: add code comments for state->pool in __btree_sort()
lib: crc64: include <linux/crc64.h> for 'crc64_be'
bcache: use read_cache_page_gfp to read the superblock
bcache: store a pointer to the on-disk sb in the cache and cached_dev structures
bcache: return a pointer to the on-disk sb from read_super
bcache: transfer the sb_page reference to register_{bdev,cache}
bcache: fix use-after-free in register_bcache()
bcache: properly initialize 'path' and 'err' in register_bcache()
bcache: rework error unwinding in register_bcache
bcache: use a separate data structure for the on-disk super block
bcache: cached_dev_free needs to put the sb page
md/raid1: introduce wait_for_serialization
md/raid1: use bucket based mechanism for IO serialization
md: introduce a new struct for IO serialization
md: don't destroy serial_info_pool if serialize_policy is true
...
Move blk_queue_make_request() to dm.c:alloc_dev() so that
q->make_request_fn is never NULL during the lifetime of a DM device
(even one that is created without a DM table).
Otherwise generic_make_request() will crash simply by doing:
dmsetup create -n test
mount /dev/dm-N /mnt
While at it, move ->congested_data initialization out of
dm.c:alloc_dev() and into the bio-based specific init method.
Reported-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1860231
Fixes: ff36ab3458 ("dm: remove request-based logic from make_request_fn wrapper")
Depends-on: c12c9a3c38 ("dm: various cleanups to md->queue initialization code")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When shrink btree node cache from c->btree_cache in bch_mca_scan(),
no matter the selected node is reaped or not, it will be rotated from
the head to the tail of c->btree_cache list. But in bcache journal
code, when flushing the btree nodes with oldest journal entry, btree
nodes are iterated and slected from the tail of c->btree_cache list in
btree_flush_write(). The list_rotate_left() in bch_mca_scan() will
make btree_flush_write() iterate more nodes in c->btree_list in reverse
order.
This patch just reaps the selected btree node cache, and not move it
from the head to the tail of c->btree_cache list. Then bch_mca_scan()
will not mess up c->btree_cache list to btree_flush_write().
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In order to skip the most recently freed btree node cahce, currently
in bch_mca_scan() the first 3 caches in c->btree_cache_freeable list
are skipped when shrinking bcache node caches in bch_mca_scan(). The
related code in bch_mca_scan() is,
737 list_for_each_entry_safe(b, t, &c->btree_cache_freeable, list) {
738 if (nr <= 0)
739 goto out;
740
741 if (++i > 3 &&
742 !mca_reap(b, 0, false)) {
lines free cache memory
746 }
747 nr--;
748 }
The problem is, if virtual memory code calls bch_mca_scan() and
the calculated 'nr' is 1 or 2, then in the above loop, nothing will
be shunk. In such case, if slub/slab manager calls bch_mca_scan()
for many times with small scan number, it does not help to shrink
cache memory and just wasts CPU cycles.
This patch just selects btree node caches from tail of the
c->btree_cache_freeable list, then the newly freed host cache can
still be allocated by mca_alloc(), and at least 1 node can be shunk.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The member 'accessed' of struct btree is used in bch_mca_scan() when
shrinking btree node caches. The original idea is, if b->accessed is
set, clean it and look at next btree node cache from c->btree_cache
list, and only shrink the caches whose b->accessed is cleaned. Then
only cold btree node cache will be shrunk.
But when I/O pressure is high, it is very probably that b->accessed
of a btree node cache will be set again in bch_btree_node_get()
before bch_mca_scan() selects it again. Then there is no chance for
bch_mca_scan() to shrink enough memory back to slub or slab system.
This patch removes member accessed from struct btree, then once a
btree node ache is selected, it will be immediately shunk. By this
change, bch_mca_scan() may release btree node cahce more efficiently.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
the commit 91be66e131 ("bcache: performance improvement for
btree_flush_write()") was an effort to flushing btree node with oldest
btree node faster in following methods,
- Only iterate dirty btree nodes in c->btree_cache, avoid scanning a lot
of clean btree nodes.
- Take c->btree_cache as a LRU-like list, aggressively flushing all
dirty nodes from tail of c->btree_cache util the btree node with
oldest journal entry is flushed. This is to reduce the time of holding
c->bucket_lock.
Guoju Fang and Shuang Li reported that they observe unexptected extra
write I/Os on cache device after applying the above patch. Guoju Fang
provideed more detailed diagnose information that the aggressive
btree nodes flushing may cause 10x more btree nodes to flush in his
workload. He points out when system memory is large enough to hold all
btree nodes in memory, c->btree_cache is not a LRU-like list any more.
Then the btree node with oldest journal entry is very probably not-
close to the tail of c->btree_cache list. In such situation much more
dirty btree nodes will be aggressively flushed before the target node
is flushed. When slow SATA SSD is used as cache device, such over-
aggressive flushing behavior will cause performance regression.
After spending a lot of time on debug and diagnose, I find the real
condition is more complicated, aggressive flushing dirty btree nodes
from tail of c->btree_cache list is not a good solution.
- When all btree nodes are cached in memory, c->btree_cache is not
a LRU-like list, the btree nodes with oldest journal entry won't
be close to the tail of the list.
- There can be hundreds dirty btree nodes reference the oldest journal
entry, before flushing all the nodes the oldest journal entry cannot
be reclaimed.
When the above two conditions mixed together, a simply flushing from
tail of c->btree_cache list is really NOT a good idea.
Fortunately there is still chance to make btree_flush_write() work
better. Here is how this patch avoids unnecessary btree nodes flushing,
- Only acquire c->journal.lock when getting oldest journal entry of
fifo c->journal.pin. In rested locations check the journal entries
locklessly, so their values can be changed on other cores
in parallel.
- In loop list_for_each_entry_safe_reverse(), checking latest front
point of fifo c->journal.pin. If it is different from the original
point which we get with locking c->journal.lock, it means the oldest
journal entry is reclaim on other cores. At this moment, all selected
dirty nodes recorded in array btree_nodes[] are all flushed and clean
on other CPU cores, it is unncessary to iterate c->btree_cache any
longer. Just quit the list_for_each_entry_safe_reverse() loop and
the following for-loop will skip all the selected clean nodes.
- Find a proper time to quit the list_for_each_entry_safe_reverse()
loop. Check the refcount value of orignial fifo front point, if the
value is larger than selected node number of btree_nodes[], it means
more matching btree nodes should be scanned. Otherwise it means no
more matching btee nodes in rest of c->btree_cache list, the loop
can be quit. If the original oldest journal entry is reclaimed and
fifo front point is updated, the refcount of original fifo front point
will be 0, then the loop will be quit too.
- Not hold c->bucket_lock too long time. c->bucket_lock is also required
for space allocation for cached data, hold it for too long time will
block regular I/O requests. When iterating list c->btree_cache, even
there are a lot of maching btree nodes, in order to not holding
c->bucket_lock for too long time, only BTREE_FLUSH_NR nodes are
selected and to flush in following for-loop.
With this patch, only btree nodes referencing oldest journal entry
are flushed to cache device, no aggressive flushing for unnecessary
btree node any more. And in order to avoid blocking regluar I/O
requests, each time when btree_flush_write() called, at most only
BTREE_FLUSH_NR btree nodes are selected to flush, even there are more
maching btree nodes in list c->btree_cache.
At last, one more thing to explain: Why it is safe to read front point
of c->journal.pin without holding c->journal.lock inside the
list_for_each_entry_safe_reverse() loop ?
Here is my answer: When reading the front point of fifo c->journal.pin,
we don't need to know the exact value of front point, we just want to
check whether the value is different from the original front point
(which is accurate value because we get it while c->jouranl.lock is
held). For such purpose, it works as expected without holding
c->journal.lock. Even the front point is changed on other CPU core and
not updated to local core, and current iterating btree node has
identical journal entry local as original fetched fifo front point, it
is still safe. Because after holding mutex b->write_lock (with memory
barrier) this btree node can be found as clean and skipped, the loop
will quite latter when iterate on next node of list c->btree_cache.
Fixes: 91be66e131 ("bcache: performance improvement for btree_flush_write()")
Reported-by: Guoju Fang <fangguoju@gmail.com>
Reported-by: Shuang Li <psymon@bonuscloud.io>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To explain the pages allocated from mempool state->pool can be
swapped in __btree_sort(), because state->pool is a page pool,
which allocates pages by alloc_pages() indeed.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid a pointless dependency on buffer heads in bcache by simply open
coding reading a single page. Also add a SB_OFFSET define for the
byte offset of the superblock instead of using magic numbers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows to properly build the superblock bio including the offset in
the page using the normal bio helpers. This fixes writing the superblock
for page sizes larger than 4k where the sb write bio would need an offset
in the bio_vec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Returning the properly typed actual data structure insteaf of the
containing struct page will save the callers some work going
forward.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid an extra reference count roundtrip by transferring the sb_page
ownership to the lower level register helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The patch "bcache: rework error unwinding in register_bcache" introduces
a use-after-free regression in register_bcache(). Here are current code,
2510 out_free_path:
2511 kfree(path);
2512 out_module_put:
2513 module_put(THIS_MODULE);
2514 out:
2515 pr_info("error %s: %s", path, err);
2516 return ret;
If some error happens and the above code path is executed, at line 2511
path is released, but referenced at line 2515. Then KASAN reports a use-
after-free error message.
This patch changes line 2515 in the following way to fix the problem,
2515 pr_info("error %s: %s", path?path:"", err);
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Patch "bcache: rework error unwinding in register_bcache" from
Christoph Hellwig changes the local variables 'path' and 'err'
in undefined initial state. If the code in register_bcache() jumps
to label 'out:' or 'out_module_put:' by goto, these two variables
might be reference with undefined value by the following line,
out_module_put:
module_put(THIS_MODULE);
out:
pr_info("error %s: %s", path, err);
return ret;
Therefore this patch initializes these two local variables properly
in register_bcache() to avoid such issue.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split the successful and error return path, and use one goto label for each
resource to unwind. This also fixes some small errors like leaking the
module reference count in the reboot case (which seems entirely harmless)
or printing the wrong warning messages for early failures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split out an on-disk version struct cache_sb with the proper endianness
annotations. This fixes a fair chunk of sparse warnings, but there are
some left due to the way the checksum is defined.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Same as cache device, the buffer page needs to be put while
freeing cached_dev. Otherwise a page would be leaked every
time a cached_dev is stopped.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When dm-writecache is used with SSD as a cache device, it would submit a
separate bio for each written block. The I/Os would be merged by the disk
scheduler, but this merging degrades performance.
Improve dm-writecache performance by submitting larger bios - this is
possible as long as there is consecutive free space on the cache
device.
Benchmark (arm64 with 64k page size, using /dev/ram0 as a cache device):
fio --bs=512k --iodepth=32 --size=400M --direct=1 \
--filename=/dev/mapper/cache --rw=randwrite --numjobs=1 --name=test
block old new
size MiB/s MiB/s
---------------------
512 181 700
1k 347 1256
2k 644 2020
4k 1183 2759
8k 1852 3333
16k 2469 3509
32k 2974 3670
64k 3404 3810
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Logical block size has type unsigned short. That means that it can be at
most 32768. However, there are architectures that can run with 64k pages
(for example arm64) and on these architectures, it may be possible to
create block devices with 64k block size.
For exmaple (run this on an architecture with 64k pages):
Mount will fail with this error because it tries to read the superblock using 2-sector
access:
device-mapper: writecache: I/O is not aligned, sector 2, size 1024, block size 65536
EXT4-fs (dm-0): unable to read superblock
This patch changes the logical block size from unsigned short to unsigned
int to avoid the overflow.
Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a configurable timeout mechanism to disable queue_if_no_path without
assistance from userspace multipathd. This reimplements multipathd's
no_path_retry mechanism in kernel space. This is motivated by the
desire to prevent processes from hanging indefinitely waiting for IO
in cases where multipathd might be unable to respond (after a failure
or for whatever reason).
Despite replicating userspace multipathd's policy configuration in
kernel space, it is important to prevent IOs from hanging forever,
waiting for userspace that may be incapable of behaving correctly.
Use of the provided "queue_if_no_path_timeout_secs" dm-multipath
module parameter is optional. This timeout mechanism is disabled by
default (by being set to 0).
Signed-off-by: Anatol Pomazau <anatol@google.com>
Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
With commit fe64369163c5 ("dm thin: don't allow changing data device
during thin-pool load") it is now possible to re-parent the data
device's flush_bio from the pool_c to pool structure. Doing so offers
improved lifetime guarantees for the flush_bio so that the call to
dm_pool_register_pre_commit_callback can now be done safely from
pool_ctr().
Depends-on: fe64369163c5 ("dm thin: don't allow changing data device during thin-pool load")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The existing code allows changing the data device when the thin-pool
target is reloaded.
This capability is not required and only complicates device lifetime
guarantees. This can cause crashes like the one reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=1788596
where the kernel tries to issue a flush bio located in a structure that
was already freed.
Take the first step to simplifying the thin-pool's data device lifetime
by disallowing changing it. Like the thin-pool's metadata device, the
data device is now set in pool_create() and it cannot be changed for a
given thin-pool.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm-thin uses struct pool to hold the state of the pool. There may be
multiple pool_c's pointing to a given pool, each pool_c represents a
loaded target. pool_c's may be created and destroyed arbitrarily and the
pool contains a reference count of pool_c's pointing to it.
Since commit 694cfe7f31 ("dm thin: Flush data device before
committing metadata") a pointer to pool_c is passed to
dm_pool_register_pre_commit_callback and this function stores it in
pmd->pre_commit_context. If this pool_c is freed, but pool is not
(because there is another pool_c referencing it), we end up in a
situation where pmd->pre_commit_context structure points to freed
pool_c. It causes a crash in metadata_pre_commit_callback.
Fix this by moving the dm_pool_register_pre_commit_callback() from
pool_ctr() to pool_preresume(). This way the in-core thin-pool metadata
is only ever armed with callback data whose lifetime matches the
active thin-pool target.
In should be noted that this fix preserves the ability to load a
thin-pool table that uses a different data block device (that contains
the same data) -- though it is unclear if that capability is still
useful and/or needed.
Fixes: 694cfe7f31 ("dm thin: Flush data device before committing metadata")
Cc: stable@vger.kernel.org
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Ensure that the pool is locked during calls to __commit_transaction and
__destroy_persistent_data_objects. Just being consistent with locking,
but reality is dm_pool_metadata_close is called once pool is being
destroyed so access to pool shouldn't be contended.
Also, use pmd_write_lock_in_core rather than __pmd_write_lock in
dm_pool_commit_metadata and rename __pmd_write_lock to
pmd_write_lock_in_core -- there was no need for the alias.
In addition, verify that the pool is locked in __commit_transaction().
Fixes: 873f258bec ("dm thin metadata: do not write metadata if no changes occurred")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When committing state, the function writecache_flush does the following:
1. write metadata (writecache_commit_flushed)
2. flush disk cache (writecache_commit_flushed)
3. wait for data writes to complete (writecache_wait_for_ios)
4. increase superblock seq_count
5. write the superblock
6. flush disk cache
It may happen that at step 3, when we wait for some write to finish, the
disk may report the write as finished, but the write only hit the disk
cache and it is not yet stored in persistent storage. At step 5 we write
the superblock - it may happen that the superblock is written before the
write that we waited for in step 3. If the machine crashes, it may result
in incorrect data being returned after reboot.
In order to fix the bug, we must swap steps 2 and 3 in the above sequence,
so that we first wait for writes to complete and then flush the disk
cache.
Fixes: 48debafe4f ("dm: add writecache target")
Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If benbi IV is used in AEAD construction, for example:
cryptsetup luksFormat <device> --cipher twofish-xts-benbi --key-size 512 --integrity=hmac-sha256
the constructor uses wrong skcipher function and crashes:
BUG: kernel NULL pointer dereference, address: 00000014
...
EIP: crypt_iv_benbi_ctr+0x15/0x70 [dm_crypt]
Call Trace:
? crypt_subkey_size+0x20/0x20 [dm_crypt]
crypt_ctr+0x567/0xfc0 [dm_crypt]
dm_table_add_target+0x15f/0x340 [dm_mod]
Fix this by properly using crypt_aead_blocksize() in this case.
Fixes: ef43aa3806 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)")
Cc: stable@vger.kernel.org # v4.12+
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=941051
Reported-by: Jerad Simpson <jbsimpson@gmail.com>
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add experimental support for BitLocker encryption with CBC mode and
additional Elephant diffuser.
The mode was used in older Windows systems and it is provided mainly
for compatibility reasons. The userspace support to activate these
devices is being added to cryptsetup utility.
Read-write activation of such a device is very simple, for example:
echo <password> | cryptsetup bitlkOpen bitlk_image.img test
The Elephant diffuser uses two rotations in opposite direction for
data (Diffuser A and B) and also XOR operation with Sector key over
the sector data; Sector key is derived from additional key data. The
original public documentation is available here:
http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf
The dm-crypt implementation is embedded to "elephant" IV (similar to
tcw IV construction).
Because we cannot modify original bio data for write (before
encryption), an additional internal flag to pre-process data is
added.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The space-maps track the reference counts for disk blocks allocated by
both the thin-provisioning and cache targets. There are variants for
tracking metadata blocks and data blocks.
Transactionality is implemented by never touching blocks from the
previous transaction, so we can rollback in the event of a crash.
When allocating a new block we need to ensure the block is free (has
reference count of 0) in both the current and previous transaction.
Prior to this fix we were doing this by searching for a free block in
the previous transaction, and relying on a 'begin' counter to track
where the last allocation in the current transaction was. This
'begin' field was not being updated in all code paths (eg, increment
of a data block reference count due to breaking sharing of a neighbour
block in the same btree leaf).
This fix keeps the 'begin' field, but now it's just a hint to speed up
the search. Instead the current transaction is searched for a free
block, and then the old transaction is double checked to ensure it's
free. Much simpler.
This fixes reports of sm_disk_new_block()'s BUG_ON() triggering when
DM thin-provisioning's snapshots are heavily used.
Reported-by: Eric Wheeler <dm-devel@lists.ewheeler.net>
Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Previously, we call check_and_add_serial when serialization is
enabled for write IO, but it could allocate and free memory
back and forth.
Now, let's just get an element from memory pool with the new
function, then insert node to rb tree if no collision happens.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Since raid1 had already used bucket based mechanism to reduce
the conflict between write IO and resync IO, it is possible to
speed up performance for io serialization with refer to the
same mechanism.
To align with the barrier bucket mechanism, we created arrays
(with the same number of BARRIER_BUCKETS_NR) for spinlock, rb
tree and waitqueue. Then we can reduce lock competition with
multiple spinlocks, boost search performance with multiple rb
trees and also reduce thundering herd problem with multiple
waitqueues.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Obviously, IO serialization could cause the degradation of
performance a lot. In order to reduce the degradation, so a
rb interval tree is added in raid1 to speed up the check of
collision.
So, a rb root is needed in md_rdev, then abstract all the
serialize related members to a new struct (serial_in_rdev),
embed it into md_rdev.
Of course, we need to free the struct if it is not needed
anymore, so rdev/rdevs_uninit_serial are added accordingly.
And they should be called when destroty memory pool or can't
alloc memory.
And we need to consider to call mddev_destroy_serial_pool
in case serialize_policy/write-behind is disabled, bitmap
is destroyed or in __md_stop_writes.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
The serial_info_pool is needed if array sets serialize_policy to
true, so don't destroy it.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Before dispatch write bio, raid1 array which enables
serialize_policy need to check if overlap exists between
this bio and previous on-flying bios. If there is overlap,
then it has to wait until the collision is disappeared.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
So far, IO serialization is used for two scenarios:
1. raid1 which enables write-behind mode, and there is rdev in the array
which is multi-queue device and flaged with writemostly.
2. IO serialization is enabled or disabled by change serialize_policy.
So introduce rdev_need_serial to check the first scenario. And for 1, IO
serialization is enabled automatically while 2 is controlled manually.
And it is possible that both scenarios are true, so for create serial pool,
rdev/rdevs_init_serial should be separate from check if the pool existed or
not. Then for destroy pool, we need to check if the pool is needed by other
rdevs due to the first scenario.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
With the new sysfs node, we can use it to control if raid1 array
wants io serialization or not. So mddev_create_serial_pool and
mddev_destroy_serial_pool are called in serialize_policy_store
to enable or disable the serialization.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
1. The related resources (spin_lock, list and waitqueue) are needed for
address raid1 reorder overlap issue too, in this case, rdev is set to
NULL for mddev_create/destroy_serial_pool which implies all rdevs need
to handle these resources.
And also add "is_suspend" to mddev_destroy_serial_pool since it will
be called under suspended situation, which also makes both create and
destroy pool have same arguments.
2. Introduce rdevs_init_serial which is called if raid1 io serialization
is enabled since all rdevs need to init related stuffs.
3. rdev_init_serial and clear_bit(CollisionCheck, &rdev->flags) should
be called between suspend and resume.
No need to export mddev_create_serial_pool since it is only called in
md-mod module.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
It actually means create here, so fix the typo.
Reported-by: Song Liu <liu.song.a23@gmail.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Previously, wb_info_pool and wb_list stuffs are introduced
to address potential data inconsistence issue for write
behind device.
Now rename them to serial related name, since the same
mechanism will be used to address reorder overlap write
issue for raid1.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
We can use "cnt" directly to update conf->worker_cnt_per_group
if alloc_thread_groups returns 0.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
In md_bitmap_unplug, bitmap->storage.filemap is double checked.
In md_bitmap_daemon_work, bitmap->storage.filemap should be checked
before reference.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Try to skip prefetching hash blocks that won't be needed due to the
"check_at_most_once" option being enabled and the corresponding data
blocks already having been verified.
Since prefetching operates on a range of data blocks, do this by just
trimming the two ends of the range. This doesn't skip every unneeded
hash block, since data blocks in the middle of the range could also be
unneeded, and hash blocks are still prefetched in large clusters as
controlled by dm_verity_prefetch_cluster. But it can still help a lot.
In a test on Android Q launching 91 apps every 15s repeated 21 times,
prefetching was only done for 447177/4776629 = 9.36% of data blocks.
Tested-by: ruxian.feng <ruxian.feng@transsion.com>
Co-developed-by: yuanjiong.gao <yuanjiong.gao@transsion.com>
Signed-off-by: yuanjiong.gao <yuanjiong.gao@transsion.com>
Signed-off-by: xianrong.zhou <xianrong.zhou@transsion.com>
[EB: simplified the 'while' loops and improved the commit message]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
GFP_KERNEL is not supposed to be or'd with GFP_NOFS (the result is
equivalent to GFP_KERNEL). Also, we use GFP_NOIO instead of GFP_NOFS
because we don't want any I/O being submitted in the direct reclaim
path.
Fixes: 39d13a1ac4 ("dm crypt: reuse eboiv skcipher for IV generation")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fixes coccicheck warning:
drivers/md/dm-thin-metadata.c:814:3-14: WARNING: Assignment of 0/1 to bool variable
drivers/md/dm-thin-metadata.c:1109:1-12: WARNING: Assignment of 0/1 to bool variable
drivers/md/dm-thin-metadata.c:1621:1-12: WARNING: Assignment of 0/1 to bool variable
drivers/md/dm-thin-metadata.c:1652:1-12: WARNING: Assignment of 0/1 to bool variable
drivers/md/dm-thin-metadata.c:1706:1-12: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fixes coccicheck warning:
drivers/md/dm-snap.c:1064:3-18: WARNING: Assignment of 0/1 to bool variable
drivers/md/dm-snap.c:1152:1-16: WARNING: Assignment of 0/1 to bool variable
drivers/md/dm-snap.c:1317:1-16: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm-zoned is observed to log failed kernel assertions and not work
correctly when operating against a device with a zone size smaller
than 128MiB (e.g. 32768 bits per 4K block). The reason is that the
bitmap size per zone is calculated as zero with such a small zone
size. Fix this problem and also make the code related to zone bitmap
management be able to handle per zone bitmaps smaller than a single
block.
A dm-zoned-tools patch is required to properly format dm-zoned devices
with zone sizes smaller than 128MiB.
Fixes: 3b1a94c88b ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
raid_status() wasn't emitting rebuild flags on the table line properly
because the rdev number was not yet set properly; index raid component
devices array directly to solve.
Also fix wrong argument count on emitted table line caused by 1 too
many rebuild/write_mostly argument and consider any journal_(dev|mode)
pairs.
Link: https://bugzilla.redhat.com/1782045
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
In the dust_map_write() function, change the return code variable
"ret" to "r", to match the convention of the other device-mapper
targets.
Signed-off-by: Bryan Gurney <bgurney@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hmxJ
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20191212' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- stable fix for the bi_size overflow. Not a corruption issue, but a
case wher we could merge but disallowed (Andreas)
- NVMe pull request via Keith, with various fixes.
- MD pull request from Song.
- Merge window regression fix for the rq passthrough stats (Logan)
- Remove unused blkcg_drain_queue() function (Guoqing)
* tag 'for-linus-20191212' of git://git.kernel.dk/linux-block:
blk-cgroup: remove blkcg_drain_queue
block: fix NULL pointer dereference in account statistics with IDE
md: make sure desc_nr less than MD_SB_DISKS
md: raid1: check rdev before reference in raid1_sync_request func
raid5: need to set STRIPE_HANDLE for batch head
block: fix "check bi_size overflow before merge"
nvme/pci: Fix read queue count
nvme/pci Limit write queue sizes to possible cpus
nvme/pci: Fix write and poll queue types
nvme/pci: Remove last_cq_head
nvme: Namepace identification descriptor list is optional
nvme-fc: fix double-free scenarios on hw queues
nvme: else following return is not needed
nvme: add error message on mismatching controller ids
nvme_fc: add module to ops template to allow module references
nvmet-loop: Avoid preallocating big SGL for data
nvme-fc: Avoid preallocating big SGL for data
nvme-rdma: Avoid preallocating big SGL for data
bio-based configurations that don't haave a SCSI device handler.
- Fix dm-btree removal to ensure non-root btree nodes have at least
(max_entries / 3) entries. This resolves userspace thin_check
utility's report of "too few entries in btree_node".
- Fix both the DM thin-provisioning and dm-clone targets to properly
flush the data device prior to metadata commit. This resolves the
potential for inconsistency across a power loss event when the data
device has a volatile writeback cache.
- Small documentation fixes to dm-clone and dm-integrity.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl3yU6sTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWvO9B/0dsIxL09sWSHPe+wuzy7WXAOCHVm04
27dloxNzgXGFT5ftvU+JpLParOtDfJ2ral2BVGExjGzMs4QP8ZLrn5UuTFuR7nXi
FDaypaCelRsh1/204bKDgb22vaZIAZFu7Rz2YsAzWqpCJZDjN5cgy9xz4GmCvXRt
R13Qq8Dia4scR/y+xCkm5s4wH2xGz1CDmpSPzbLTpTfkMfY5yzp6Gzaipj4Fwq78
dDERNZNuabVr2o8mt8OGd/s1h4QtiJps1J8NV2He5C3Bf8daaFVkHDCl75+P2KQC
++VaIS/l1TfcOyDJmoztg7w2gmLkTxEskVpN/UQD/Ut9D5m7P9S7uaQg
=6t9f
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM multipath by restoring full path selector functionality for
bio-based configurations that don't haave a SCSI device handler.
- Fix dm-btree removal to ensure non-root btree nodes have at least
(max_entries / 3) entries. This resolves userspace thin_check
utility's report of "too few entries in btree_node".
- Fix both the DM thin-provisioning and dm-clone targets to properly
flush the data device prior to metadata commit. This resolves the
potential for inconsistency across a power loss event when the data
device has a volatile writeback cache.
- Small documentation fixes to dm-clone and dm-integrity.
* tag 'for-5.5/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
docs: dm-integrity: remove reference to ARC4
dm thin: Flush data device before committing metadata
dm thin metadata: Add support for a pre-commit callback
dm clone: Flush destination device before committing metadata
dm clone metadata: Use a two phase commit
dm clone metadata: Track exact changes per transaction
dm btree: increase rebalance threshold in __rebalance2()
dm: add dm-clone to the documentation index
dm mpath: remove harmful bio-based optimization
For super_90_load, we need to make sure 'desc_nr' less
than MD_SB_DISKS, avoiding invalid memory access of 'sb->disks'.
Fixes: 228fc7d76d ("md: avoid invalid memory access for array sb->dev_roles")
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
In raid1_sync_request func, rdev should be checked before reference.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
With commit 6ce220dd2f ("raid5: don't set
STRIPE_HANDLE to stripe which is in batch list"), we don't want to set
STRIPE_HANDLE flag for sh which is already in batch list.
However, the stripe which is the head of batch list should set this flag,
otherwise panic could happen inside init_stripe at BUG_ON(sh->batch_head),
it is reproducible with raid5 on top of nvdimm devices per Xiao oberserved.
Thanks for Xiao's effort to verify the change.
Fixes: 6ce220dd2f ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list")
Reported-by: Xiao Ni <xni@redhat.com>
Tested-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().
This patch is generated using following script:
EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"
git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do
if [[ "$file" =~ $EXCLUDE_FILES ]]; then
continue
fi
sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
The thin provisioning target maintains per thin device mappings that map
virtual blocks to data blocks in the data device.
When we write to a shared block, in case of internal snapshots, or
provision a new block, in case of external snapshots, we copy the shared
block to a new data block (COW), update the mapping for the relevant
virtual block and then issue the write to the new data block.
Suppose the data device has a volatile write-back cache and the
following sequence of events occur:
1. We write to a shared block
2. A new data block is allocated
3. We copy the shared block to the new data block using kcopyd (COW)
4. We insert the new mapping for the virtual block in the btree for that
thin device.
5. The commit timeout expires and we commit the metadata, that now
includes the new mapping from step (4).
6. The system crashes and the data device's cache has not been flushed,
meaning that the COWed data are lost.
The next time we read that virtual block of the thin device we read it
from the data block allocated in step (2), since the metadata have been
successfully committed. The data are lost due to the crash, so we read
garbage instead of the old, shared data.
This has the following implications:
1. In case of writes to shared blocks, with size smaller than the pool's
block size (which means we first copy the whole block and then issue
the smaller write), we corrupt data that the user never touched.
2. In case of writes to shared blocks, with size equal to the device's
logical block size, we fail to provide atomic sector writes. When the
system recovers the user will read garbage from that sector instead
of the old data or the new data.
3. Even for writes to shared blocks, with size equal to the pool's block
size (overwrites), after the system recovers, the written sectors
will contain garbage instead of a random mix of sectors containing
either old data or new data, thus we fail again to provide atomic
sectors writes.
4. Even when the user flushes the thin device, because we first commit
the metadata and then pass down the flush, the same risk for
corruption exists (if the system crashes after the metadata have been
committed but before the flush is passed down to the data device.)
The only case which is unaffected is that of writes with size equal to
the pool's block size and with the FUA flag set. But, because FUA writes
trigger metadata commits, this case can trigger the corruption
indirectly.
Moreover, apart from internal and external snapshots, the same issue
exists for newly provisioned blocks, when block zeroing is enabled.
After the system recovers the provisioned blocks might contain garbage
instead of zeroes.
To solve this and avoid the potential data corruption we flush the
pool's data device **before** committing its metadata.
This ensures that the data blocks of any newly inserted mappings are
properly written to non-volatile storage and won't be lost in case of a
crash.
Cc: stable@vger.kernel.org
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add support for one pre-commit callback which is run right before the
metadata are committed.
This allows the thin provisioning target to run a callback before the
metadata are committed and is required by the next commit.
Cc: stable@vger.kernel.org
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm-clone maintains an on-disk bitmap which records which regions are
valid in the destination device, i.e., which regions have already been
hydrated, or have been written to directly, via user I/O.
Setting a bit in the on-disk bitmap meas the corresponding region is
valid in the destination device and we redirect all I/O regarding it to
the destination device.
Suppose the destination device has a volatile write-back cache and the
following sequence of events occur:
1. A region gets hydrated, either through the background hydration or
because it was written to directly, via user I/O.
2. The commit timeout expires and we commit the metadata, marking that
region as valid in the destination device.
3. The system crashes and the destination device's cache has not been
flushed, meaning the region's data are lost.
The next time we read that region we read it from the destination
device, since the metadata have been successfully committed, but the
data are lost due to the crash, so we read garbage instead of the old
data.
This has several implications:
1. In case of background hydration or of writes with size smaller than
the region size (which means we first copy the whole region and then
issue the smaller write), we corrupt data that the user never
touched.
2. In case of writes with size equal to the device's logical block size,
we fail to provide atomic sector writes. When the system recovers the
user will read garbage from the sector instead of the old data or the
new data.
3. In case of writes without the FUA flag set, after the system
recovers, the written sectors will contain garbage instead of a
random mix of sectors containing either old data or new data, thus we
fail again to provide atomic sector writes.
4. Even when the user flushes the dm-clone device, because we first
commit the metadata and then pass down the flush, the same risk for
corruption exists (if the system crashes after the metadata have been
committed but before the flush is passed down).
The only case which is unaffected is that of writes with size equal to
the region size and with the FUA flag set. But, because FUA writes
trigger metadata commits, this case can trigger the corruption
indirectly.
To solve this and avoid the potential data corruption we flush the
destination device **before** committing the metadata.
This ensures that any freshly hydrated regions, for which we commit the
metadata, are properly written to non-volatile storage and won't be lost
in case of a crash.
Fixes: 7431b7835f ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Split the metadata commit in two parts:
1. dm_clone_metadata_pre_commit(): Prepare the current transaction for
committing. After this is called, all subsequent metadata updates,
done through either dm_clone_set_region_hydrated() or
dm_clone_cond_set_range(), will be part of the next transaction.
2. dm_clone_metadata_commit(): Actually commit the current transaction
to disk and start a new transaction.
This is required by the following commit. It allows dm-clone to flush
the destination device after step (1) to ensure that all freshly
hydrated regions, for which we are updating the metadata, are properly
written to non-volatile storage and won't be lost in case of a crash.
Fixes: 7431b7835f ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Extend struct dirty_map with a second bitmap which tracks the exact
regions that were hydrated during the current metadata transaction.
Moreover, fix __flush_dmap() to only commit the metadata of the regions
that were hydrated during the current transaction.
This is required by the following commits to fix a data corruption bug.
Fixes: 7431b7835f ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
We got the following warnings from thin_check during thin-pool setup:
$ thin_check /dev/vdb
examining superblock
examining devices tree
missing devices: [1, 84]
too few entries in btree_node: 41, expected at least 42 (block 138, max_entries = 126)
examining mapping tree
The phenomenon is the number of entries in one node of details_info tree is
less than (max_entries / 3). And it can be easily reproduced by the following
procedures:
$ new a thin pool
$ presume the max entries of details_info tree is 126
$ new 127 thin devices (e.g. 1~127) to make the root node being full
and then split
$ remove the first 43 (e.g. 1~43) thin devices to make the children
reblance repeatedly
$ stop the thin pool
$ thin_check
The root cause is that the B-tree removal procedure in __rebalance2()
doesn't guarantee the invariance: the minimal number of entries in
non-root node should be >= (max_entries / 3).
Simply fix the problem by increasing the rebalance threshold to
make sure the number of entries in each child will be greater
than or equal to (max_entries / 3 + 1), so no matter which
child is used for removal, the number will still be valid.
Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
bio based drivers only need to update q->nr_zones. Do that manually
instead of overloading blk_revalidate_disk_zones to keep that function
simpler for the next round of changes that will rely even more on the
request based functionality.
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify the arguments to blkdev_nr_zones by passing a gendisk instead
of the block_device and capacity. This also removes the need for
__blkdev_nr_zones as all callers are outside the fast path and can
deal with the additional branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Removes the branching for edge-case where no SCSI device handler
exists. The __map_bio_fast() method was far too limited, by only
selecting a new pathgroup or path IFF there was a path failure, fix this
be eliminating it in favor of __map_bio(). __map_bio()'s extra SCSI
device handler specific MPATHF_PG_INIT_REQUIRED test is not in the fast
path anyway.
This change restores full path selector functionality for bio-based
configurations that don't haave a SCSI device handler. But it should be
noted that the path selectors do have an impact on performance for
certain networks that are extremely fast (and don't require frequent
switching).
Fixes: 8d47e65948 ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks")
Cc: stable@vger.kernel.org
Reported-by: Drew Hastings <dhastings@crucialwebhost.com>
Suggested-by: Martin Wilck <mwilck@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
- Fix DM raid target to properly resync raidset even if bitmap needed
additional pages.
- Fix DM crypt performance regression due to use of WQ_HIGHPRI for the
IO and crypt workqueues.
- Fix DM integrity metadata layout that was aligned on 128K boundary
rather than the intended 4K boundary (removes 124K of wasted space for
each metadata block).
- Improve the DM thin, cache and clone targets to use spin_lock_irq
rather than spin_lock_irqsave where possible.
- Fix DM thin single thread performance that was lost due to needless
workqueue wakeups.
- Fix DM zoned target performance that was lost due to excessive backing
device checks.
- Add ability to trigger write failure with the DM dust test target.
- Fix whitespace indentation in drivers/md/Kconfig.
- Various smalls fixes and cleanups (e.g. use struct_size, fix
uninitialized variable, variable renames, etc).
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl3X/uUTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWv4PCACAIapkVx6A+MCQMT1lFJ9Ad5RRE0jb
xKjvte0KKozIsrabkLeRS/fOi6IVJwfdyF+rI5Q5BNxh6IzLrxvKvtcSatYyxY+O
hd/ijcgntE7UBXU99nesBG9Vax66EXeAkXUU+UJWkijrIPikxAc62zkpl4KwK4c2
sVHRu7g7avYKSeN/CUl18WIPXKVGmKbKTUtWNd/R46V37y27EwNP2NXUGwQcrCHR
G5TJBJIl3UL2nB14LbvbZ8+0nwLjiFgc6SJK72bTJwLOVQFA+0KrqxIejqtRxlGR
fsEq9zfbm+9VdsQMESGYKAI89diq26uCLYBmBQe7OtJc7HBdBN0/Wkbe
=CiR7
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM core to disallow stacking request-based DM on partitions.
- Fix DM raid target to properly resync raidset even if bitmap needed
additional pages.
- Fix DM crypt performance regression due to use of WQ_HIGHPRI for the
IO and crypt workqueues.
- Fix DM integrity metadata layout that was aligned on 128K boundary
rather than the intended 4K boundary (removes 124K of wasted space
for each metadata block).
- Improve the DM thin, cache and clone targets to use spin_lock_irq
rather than spin_lock_irqsave where possible.
- Fix DM thin single thread performance that was lost due to needless
workqueue wakeups.
- Fix DM zoned target performance that was lost due to excessive
backing device checks.
- Add ability to trigger write failure with the DM dust test target.
- Fix whitespace indentation in drivers/md/Kconfig.
- Various smalls fixes and cleanups (e.g. use struct_size, fix
uninitialized variable, variable renames, etc).
* tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits)
Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"
dm: Fix Kconfig indentation
dm thin: wakeup worker only when deferred bios exist
dm integrity: fix excessive alignment of metadata runs
dm raid: Remove unnecessary negation of a shift in raid10_format_to_md_layout
dm zoned: reduce overhead of backing device checks
dm dust: add limited write failure mode
dm dust: change ret to r in dust_map_read and dust_map
dm dust: change result vars to r
dm cache: replace spin_lock_irqsave with spin_lock_irq
dm bio prison: replace spin_lock_irqsave with spin_lock_irq
dm thin: replace spin_lock_irqsave with spin_lock_irq
dm clone: add bucket_lock_irq/bucket_unlock_irq helpers
dm clone: replace spin_lock_irqsave with spin_lock_irq
dm writecache: handle REQ_FUA
dm writecache: fix uninitialized variable warning
dm stripe: use struct_size() in kmalloc()
dm raid: streamline rs_get_progress() and its raid_status() caller side
dm raid: simplify rs_setup_recovery call chain
dm raid: to ensure resynchronization, perform raid set grow in preresume
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3YAiAQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpsJRD/wNfUGWVdIckw7iiFNuuipKBEy0Nd2VLt0B
I+pVW/YjDsG2oxWXWPs5Nxc7ca2A8EzRXcWP0xEjBfOCcBh/9mULi1flkLRoWKcq
v/OuTVif3ATvgJcwNkbMcoi0bYA/VwKi2dWC6ALhDDmZhyMTLeE362oIeOUNNnl6
GM8CGZHaRfmBzcH5t+WnxiS6rBlt5iwFJ35EvZo3GMXGGiLGlryxEXPAwZrf4haA
Z4atNinKcNXhb80LWHo23aK3bpnaumwKP4BPuLEyvnjS4iU8SeYTXy+w5yq1BE+h
HBP5s3no/mPiBAG8b6EZXqOJUGlN596AQfNLu7vCR78tmImZF0jKRFsHEAaKXf+B
1yRgZi7J+gV0qzK/Ufulg43vItk5/sTzEuV9YLfCpKTr14MFcWw908BAqaI5Kk1K
e8uGqnb2KbZOLTW4QdPvpWg3eYtqEoluSoZUQ5elHxqQZ4MSZ1lK78FF1TeaW/pw
sYH+v6rsWoVjEcFSwGoaaOMravzU4MKtavNAZrTJwKZx7qCqkwmi3R1k8WF6KsSV
rTRAzUC1wpTdSOm1MYPMMKM/h5+BJRSJ/RjljOF4fXLnvpD5q0lequCWjrrEzc6c
HPRKIgSBq7S620A19QD8UxwvZJ8bOivESqr0bux29v1Vpf7vJBrRMng8nLUrXfJs
jdma5mK1UA==
=/G9l
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block
Pull zoned block device update from Jens Axboe:
"Enhancements and improvements to the zoned device support"
* tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block:
scsi: sd_zbc: Remove set but not used variable 'buflen'
block: rework zone reporting
scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
null_blk: Add zone_nr_conv to features
null_blk: clean up report zones
null_blk: clean up the block device operations
block: Remove partition support for zoned block devices
block: Simplify report zones execution
block: cleanup the !zoned case in blk_revalidate_disk_zones
block: Enhance blk_revalidate_disk_zones()
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3WyEAQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgplgbD/4jNeqT0q2IkNcUUEWkZWsBOlfi0SiclS5v
X8JY1IxTlL0kaBWm83mw06JewucQ97Fh7xblPE8/iDHJqpgEX4vvSQY1b8hcDulZ
YOKUnLkFU22nICeT04/8x/+f8gqD5KOlGxkgEvUKViQW15oc0oNu4St/yFM1QEN0
qNMzpcfFXV9lYsOPl0y3pKdP+qbfcpeSmaFD9Z65gxN6rJy1WR8rtUGXy2luoiEc
dh15IL9AGN/r8VTo8yRpD9PStiuJqpALIR8OHJSHPj+s0pQ6twk4aehcnYseAMbH
zSDpa9AJrfqlnh8tUfKYLWi/PM7pMH0F01rAiQv47j/C0+QhbiOU/uTFTzUW5hQ1
eK6XzJ0slxwnDsHLKf+xJmCj0Oyk0jDimNQr/2MNsuhmr29V5lfvBNflub8eOLyZ
ie2Eulv+z6pYBSJx6kqm0X3vhXOy4wgU+X8LzvfcP9iAjgU1rfzxUWxLEj+KfJS2
Nl+ERV9nafoPpoKpNR7zWRBUulp1qZJzo/U9JaUKiI5cWkIH1hhHmU2++xMeyJpb
XHoDFNTGv6z/eef65eSveFD7F274TSi16K56Obk+4KWaSrIR0d6VwUA7FDmJbSI+
Jqk1OFdaRGsQ5OcVxF1Qo4WChn0FvhcD0c+yL0N19WZ01QeYsb3hlA+MUPDtGQ04
U79MPfu7iA==
=i0jf
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the main block driver updates for 5.5. Nothing major in here,
mostly just fixes. This contains:
- a set of bcache changes via Coly
- MD changes from Song
- loop unmap write-zeroes fix (Darrick)
- spelling fixes (Geert)
- zoned additions cleanups to null_blk/dm (Ajay)
- allow null_blk online submit queue changes (Bart)
- NVMe changes via Keith, nothing major here either"
* tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block: (56 commits)
Revert "bcache: fix fifo index swapping condition in journal_pin_cmp()"
drivers/md/raid5-ppl.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
drivers/md/raid5.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
bcache: don't export symbols
bcache: remove the extra cflags for request.o
bcache: at least try to shrink 1 node in bch_mca_scan()
bcache: add idle_max_writeback_rate sysfs interface
bcache: add code comments in bch_btree_leaf_dirty()
bcache: fix deadlock in bcache_allocator
bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front()
bcache: deleted code comments for dead code in bch_data_insert_keys()
bcache: add more accurate error messages in read_super()
bcache: fix static checker warning in bcache_device_free()
bcache: fix a lost wake-up problem caused by mca_cannibalize_lock
bcache: fix fifo index swapping condition in journal_pin_cmp()
md/raid10: prevent access of uninitialized resync_pages offset
md: avoid invalid memory access for array sb->dev_roles
md/raid1: avoid soft lockup under high load
null_blk: add zone open, close, and finish support
dm: add zone open, close and finish support
...
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Coly says:
"Guoju Fang talked to me today, he told me this change was unnecessary
and I was over-thought.
Then I realize fifo_idx() uses a mask to handle the array index overflow
condition, so the index swap in journal_pin_cmp() won't happen. And yes,
Guoju and Kent are correct.
Since you already applied this patch, can you please to remove this
patch from your for-next branch? This single patch does not break
thing, but it is unecessary at this moment."
This reverts commit c0e0954e90.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Single thread fio test (read, bs=4k, ioengine=libaio, iodepth=128,
numjobs=1) over dm-thin device has poor performance versus bare nvme
device.
Further investigation with perf indicates that queue_work_on() consumes
over 20% CPU time when doing IO over dm-thin device. The call stack is
as follows.
- 40.57% thin_map
+ 22.07% queue_work_on
+ 9.95% dm_thin_find_block
+ 2.80% cell_defer_no_holder
1.91% inc_all_io_entry.isra.33.part.34
+ 1.78% bio_detain.isra.35
In cell_defer_no_holder(), wakeup_worker() is always called, no matter
whether the tc->deferred_bio_list list is empty or not. In single thread
IO model, this list is most likely empty. So skip waking up worker thread
if tc->deferred_bio_list list is empty.
Single thread IO performance improves from 448 MiB/s to 646 MiB/s (+44%)
once the needless wake_worker() calls are properly skipped.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Metadata runs are supposed to be aligned on 4k boundary (so that they work
efficiently with disks with 4k sectors). However, there was a programming
bug that makes them aligned on 128k boundary instead. The unused space is
wasted.
Fix this bug by providing a proper 4k alignment. In order to keep
existing volumes working, we introduce a new flag SB_FLAG_FIXED_PADDING
- when the flag is clear, we calculate the padding the old way. In order
to make sure that the old version cannot mount the volume created by the
new version, we increase superblock version to 4.
Also in order to not break with old integritysetup, we fix alignment
only if the parameter "fix_padding" is present when formatting the
device.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
As it is consistent with prefixes of other write life time hints.
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
As it is consistent with prefixes of other write life time hints.
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
None of the exported bcache symbols are actually used anywhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no block directory this file needs includes from.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In bch_mca_scan(), the number of shrinking btree node is calculated
by code like this,
unsigned long nr = sc->nr_to_scan;
nr /= c->btree_pages;
nr = min_t(unsigned long, nr, mca_can_free(c));
variable sc->nr_to_scan is number of objects (here is bcache B+tree
nodes' number) to shrink, and pointer variable sc is sent from memory
management code as parametr of a callback.
If sc->nr_to_scan is smaller than c->btree_pages, after the above
calculation, variable 'nr' will be 0 and nothing will be shrunk. It is
frequeently observed that only 1 or 2 is set to sc->nr_to_scan and make
nr to be zero. Then bch_mca_scan() will do nothing more then acquiring
and releasing mutex c->bucket_lock.
This patch checkes whether nr is 0 after the above calculation, if 0
is the result then set 1 to variable 'n'. Then at least bch_mca_scan()
will try to shrink a single B+tree node.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For writeback mode, if there is no regular I/O request for a while,
the writeback rate will be set to the maximum value (1TB/s for now).
This is good for most of the storage workload, but there are still
people don't what the maximum writeback rate in I/O idle time.
This patch adds a sysfs interface file idle_max_writeback_rate to
permit people to disable maximum writeback rate. Then the minimum
writeback rate can be advised by writeback_rate_minimum in the
bcache device's sysfs interface.
Reported-by: Christian Balzer <chibi@gol.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds code comments in bch_btree_leaf_dirty() to explain
why w->journal should always reference the eldest journal pin of
all the writing bkeys in the btree node. To make the bcache journal
code to be easier to be understood.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bcache_allocator can call the following:
bch_allocator_thread()
-> bch_prio_write()
-> bch_bucket_alloc()
-> wait on &ca->set->bucket_wait
But the wake up event on bucket_wait is supposed to come from
bch_allocator_thread() itself => deadlock:
[ 1158.490744] INFO: task bcache_allocato:15861 blocked for more than 10 seconds.
[ 1158.495929] Not tainted 5.3.0-050300rc3-generic #201908042232
[ 1158.500653] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1158.504413] bcache_allocato D 0 15861 2 0x80004000
[ 1158.504419] Call Trace:
[ 1158.504429] __schedule+0x2a8/0x670
[ 1158.504432] schedule+0x2d/0x90
[ 1158.504448] bch_bucket_alloc+0xe5/0x370 [bcache]
[ 1158.504453] ? wait_woken+0x80/0x80
[ 1158.504466] bch_prio_write+0x1dc/0x390 [bcache]
[ 1158.504476] bch_allocator_thread+0x233/0x490 [bcache]
[ 1158.504491] kthread+0x121/0x140
[ 1158.504503] ? invalidate_buckets+0x890/0x890 [bcache]
[ 1158.504506] ? kthread_park+0xb0/0xb0
[ 1158.504510] ret_from_fork+0x35/0x40
Fix by making the call to bch_prio_write() non-blocking, so that
bch_allocator_thread() never waits on itself.
Moreover, make sure to wake up the garbage collector thread when
bch_prio_write() is failing to allocate buckets.
BugLink: https://bugs.launchpad.net/bugs/1784665
BugLink: https://bugs.launchpad.net/bugs/1796292
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds simple code comments for bch_keylist_pop() and
bch_keylist_pop_front() in bset.c, to make the code more easier to
be understand.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In request.c:bch_data_insert_keys(), there is code comment for a piece
of dead code. This patch deletes the dead code and its code comment
since they are useless in practice.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Previous code only returns "Not a bcache superblock" for both bcache
super block offset and magic error. This patch addss more accurate error
messages,
- for super block unmatched offset:
"Not a bcache superblock (bad offset)"
- for super block unmatched magic number:
"Not a bcache superblock (bad magic)"
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit cafe563591 ("bcache: A block layer cache") leads to the
following static checker warning:
./drivers/md/bcache/super.c:770 bcache_device_free()
warn: variable dereferenced before check 'd->disk' (see line 766)
drivers/md/bcache/super.c
762 static void bcache_device_free(struct bcache_device *d)
763 {
764 lockdep_assert_held(&bch_register_lock);
765
766 pr_info("%s stopped", d->disk->disk_name);
^^^^^^^^^
Unchecked dereference.
767
768 if (d->c)
769 bcache_device_detach(d);
770 if (d->disk && d->disk->flags & GENHD_FL_UP)
^^^^^^^
Check too late.
771 del_gendisk(d->disk);
772 if (d->disk && d->disk->queue)
773 blk_cleanup_queue(d->disk->queue);
774 if (d->disk) {
775 ida_simple_remove(&bcache_device_idx,
776 first_minor_to_idx(d->disk->first_minor));
777 put_disk(d->disk);
778 }
779
It is not 100% sure that the gendisk struct of bcache device will always
be there, the warning makes sense when there is problem in block core.
This patch tries to remove the static checking warning by checking
d->disk to avoid NULL pointer deferences.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch fix a lost wake-up problem caused by the race between
mca_cannibalize_lock and bch_cannibalize_unlock.
Consider two processes, A and B. Process A is executing
mca_cannibalize_lock, while process B takes c->btree_cache_alloc_lock
and is executing bch_cannibalize_unlock. The problem happens that after
process A executes cmpxchg and will execute prepare_to_wait. In this
timeslice process B executes wake_up, but after that process A executes
prepare_to_wait and set the state to TASK_INTERRUPTIBLE. Then process A
goes to sleep but no one will wake up it. This problem may cause bcache
device to dead.
Signed-off-by: Guoju Fang <fangguoju@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fifo structure journal.pin is implemented by a cycle buffer, if the back
index reaches highest location of the cycle buffer, it will be swapped
to 0. Once the swapping happens, it means a smaller fifo index might be
associated to a newer journal entry. So the btree node with oldest
journal entry won't be selected in bch_btree_leaf_dirty() to reference
the dirty B+tree leaf node. This problem may cause bcache journal won't
protect unflushed oldest B+tree dirty leaf node in power failure, and
this B+tree leaf node is possible to beinconsistent after reboot from
power failure.
This patch fixes the fifo index comparing logic in journal_pin_cmp(),
to avoid potential corrupted B+tree leaf node when the back index of
journal pin is swapped.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid the need to allocate a potentially large array of struct blk_zone
in the block layer by switching the ->report_zones method interface to
a callback model. Now the caller simply supplies a callback that is
executed on each reported zone, and private data for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No known partitioning tool supports zoned block devices, especially the
host managed flavor with strong sequential write constraints.
Furthermore, there are also no known user nor use cases for partitioned
zoned block devices.
This patch removes partition device creation for zoned block devices,
which allows simplifying the processing of zone commands for zoned
block devices. A warning is added if a partition table is found on the
device.
For report zones operations no zone sector information remapping is
necessary anymore, simplifying the code. Of note is that remapping of
zone reports for DM targets is still necessary as done by
dm_remap_zone_report().
Similarly, remaping of a zone reset bio is not necessary anymore.
Testing for the applicability of the zone reset all request also becomes
simpler and only needs to check that the number of sectors of the
requested zone range is equal to the disk capacity.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All kernel users of blkdev_report_zones() as well as applications use
through ioctl(BLKZONEREPORT) expect to potentially get less zone
descriptors than requested. As such, the use of the internal report
zones command execution loop implemented by blk_report_zones() is
not necessary and can even be harmful to performance by causing the
execution of inefficient small zones report command to service the
reminder of a requested zone array.
This patch removes blk_report_zones(), simplifying the code. Also
remove a now incorrect comment in dm_blk_report_zones().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier Gonzalez <javier@javigon.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* for-5.5/drivers: (38 commits)
null_blk: add zone open, close, and finish support
dm: add zone open, close and finish support
nvme: Fix parsing of ANA log page
nvmet: stop using bio_set_op_attrs
nvmet: add plugging for read/write when ns is bdev
nvmet: clean up command parsing a bit
nvme-pci: Spelling s/resdicovered/rediscovered/
nvmet: fill discovery controller sn, fr and mn correctly
nvmet: Open code nvmet_req_execute()
nvmet: Remove the data_len field from the nvmet_req struct
nvmet: Introduce nvmet_dsm_len() helper
nvmet: Cleanup discovery execute handlers
nvmet: Introduce common execute function for get_log_page and identify
nvmet-tcp: Don't set the request's data_len
nvmet-tcp: Don't check data_len in nvmet_tcp_map_data()
nvme: Introduce nvme_lba_to_sect()
nvme: Cleanup and rename nvme_block_nr()
nvme: resync include/linux/nvme.h with nvmecli
nvme: move common call to nvme_cleanup_cmd to core layer
nvme: introduce "Command Aborted By host" status code
...
Due to unneeded multiplication in the out_free_pages portion of
r10buf_pool_alloc(), when using a 3-copy raid10 layout, it is
possible to access a resync_pages offset that has not been
initialized. This access translates into a crash of the system
within resync_free_pages() while passing a bad pointer to
put_page(). Remove the multiplication, preventing access to the
uninitialized area.
Fixes: f025061836 ("md: raid10: don't use bio's vec table to manage resync pages")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: John Pittman <jpittman@redhat.com>
Suggested-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
we need to gurantee 'desc_nr' valid before access array
of sb->dev_roles.
In addition, we should avoid .load_super always return '0'
when level is LEVEL_MULTIPATH, which is not expected.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1487373 ("Memory - illegal accesses")
Fixes: 6a5cb53aaa ("md: no longer compare spare disk superblock events in super_load")
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
As all I/O is being pushed through a kernel thread the softlockup
watchdog might be triggered under high load.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Pull on for-linus to resolve what otherwise would have been a conflict
with the cgroups rstat patchset from Tejun.
* for-linus: (942 commits)
blkcg: make blkcg_print_stat() print stats only for online blkgs
nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
nvme-rdma: fix a segmentation fault during module unload
iocost: don't nest spin_lock_irq in ioc_weight_write()
io_uring: ensure we clear io_kiocb->result before each issue
um-ubd: Entrust re-queue to the upper layers
nvme-multipath: remove unused groups_only mode in ana log
nvme-multipath: fix possible io hang after ctrl reconnect
io_uring: don't touch ctx in setup after ring fd install
io_uring: Fix leaked shadow_req
Linux 5.4-rc5
riscv: cleanup do_trap_break
nbd: verify socket is supported during setup
ata: libahci_platform: Fix regulator_get_optional() misuse
nbd: handle racing with error'ed out commands
nbd: protect cmd->status with cmd->lock
io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREAD
io_uring: used cached copies of sq->dropped and cq->overflow
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
...
When building with Clang + -Wtautological-constant-compare:
drivers/md/dm-raid.c:619:8: warning: converting the result of '<<' to a
boolean always evaluates to true [-Wtautological-constant-compare]
r = !RAID10_OFFSET;
^
drivers/md/dm-raid.c:517:28: note: expanded from macro 'RAID10_OFFSET'
#define RAID10_OFFSET (1 << 16) /* stripes with data
copies area adjacent on devices */
^
1 warning generated.
Negating a non-zero number will always make it zero, which is the
default value of r in this function so this statement is unnecessary;
remove it so that clang no longer warns.
Link: https://github.com/ClangBuiltLinux/linux/issues/753
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit 75d66ffb48 added backing device health checks and as a part
of these checks, check_events() block ops template call is invoked in
dm-zoned mapping path as well as in reclaim and flush path. Calling
check_events() with ATA or SCSI backing devices introduces a blocking
scsi_test_unit_ready() call being made in sd_check_events(). Even though
the overhead of calling scsi_test_unit_ready() is small for ATA zoned
devices, it is much larger for SCSI and it affects performance in a very
negative way.
Fix this performance regression by executing check_events() only in case
of any I/O errors. The function dmz_bdev_is_dying() is modified to call
only blk_queue_dying(), while calls to check_events() are made in a new
helper function, dmz_check_bdev().
Reported-by: zhangxiaoxu <zhangxiaoxu5@huawei.com>
Fixes: 75d66ffb48 ("dm zoned: properly handle backing device failure")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Implement REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH
support to allow explicit control of zone states.
Contains contributions from Matias Bjorling, Hans Holmberg and
Damien Le Moal.
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull in dependencies for the new zoned open/close/finish support.
* for-5.5/block: (32 commits)
block: add zone open, close and finish ioctl support
block: add zone open, close and finish operations
block: Simplify REQ_OP_ZONE_RESET_ALL handling
block: Remove REQ_OP_ZONE_RESET plugging
block: Warn if elevator= parameter is used
block: avoid blk_bio_segment_split for small I/O operations
blk-mq: make sure that line break can be printed
block: sed-opal: Introduce Opal Datastore UID
block: sed-opal: Add support to read/write opal tables generically
block: sed-opal: Generalizing write data to any opal table
bdev: Refresh bdev size for disks without partitioning
bdev: Factor out bdev revalidation into a common helper
blk-mq: avoid sysfs buffer overflow with too many CPU cores
blk-mq: Make blk_mq_run_hw_queue() return void
fcntl: fix typo in RWH_WRITE_LIFE_NOT_SET r/w hint name
blk-mq: fill header with kernel-doc
blk-mq: remove needless goto from blk_mq_get_driver_tag
block: reorder bio::__bi_remaining for better packing
block: Reduce the amount of memory used for tag sets
block: Reduce the amount of memory required per request queue
...
Zoned block devices (ZBC and ZAC devices) allow an explicit control
over the condition (state) of zones. The operations allowed are:
* Open a zone: Transition to open condition to indicate that a zone will
actively be written
* Close a zone: Transition to closed condition to release the drive
resources used for writing to a zone
* Finish a zone: Transition an open or closed zone to the full
condition to prevent write operations
To enable this control for in-kernel zoned block device users, define
the new request operations REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE
and REQ_OP_ZONE_FINISH as well as the generic function
blkdev_zone_mgmt() for submitting these operations on a range of zones.
This results in blkdev_reset_zones() removal and replacement with this
new zone magement function. Users of blkdev_reset_zones() (f2fs and
dm-zoned) are updated accordingly.
Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a limited write failure mode which allows a write to a block to fail
a specified amount of times, prior to remapping. The "addbadblock"
message is extended to allow specifying the limited number of times a
write fails.
Example: add bad block on block 60, with 5 write failures:
dmsetup message 0 dust1 addbadblock 60 5
The write failure counter will be printed for newly added bad blocks.
Signed-off-by: Bryan Gurney <bgurney@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
In the dust_map_read() and dust_map() functions, change the
return code variable "ret" to "r", to match the convention of the
other device-mapper targets.
Signed-off-by: Bryan Gurney <bgurney@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Change the "result" variables to "r" in dust_status() and
dust_message().
Signed-off-by: Bryan Gurney <bgurney@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If we are in a place where it is known that interrupts are enabled,
functions spin_lock_irq/spin_unlock_irq should be used instead of
spin_lock_irqsave/spin_unlock_irqrestore.
spin_lock_irq and spin_unlock_irq are faster because they don't need to
push and pop the flags register.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If we are in a place where it is known that interrupts are enabled,
functions spin_lock_irq/spin_unlock_irq should be used instead of
spin_lock_irqsave/spin_unlock_irqrestore.
spin_lock_irq and spin_unlock_irq are faster because they don't need to
push and pop the flags register.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Introduce bucket_lock_irq() and bucket_unlock_irq() helpers and use them
in places where it is known that interrupts are enabled.
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If we are in a place where it is known that interrupts are enabled,
functions spin_lock_irq/spin_unlock_irq should be used instead of
spin_lock_irqsave/spin_unlock_irqrestore.
spin_lock_irq and spin_unlock_irq are faster because they don't need to
push and pop the flags register.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct stripe_c {
...
struct stripe stripe[0];
};
In this case alloc_context() and dm_array_too_big() are removed and
replaced by the direct use of the struct_size() helper in kmalloc().
Notice that open-coded form is prone to type mistakes.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Pass already deciphered state into rs_get_progress, simplify recovery offset
definition and combine two st_resync, st_reshape conditionals into one as is
already the case with st_check and st_repair.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
rs_setup_recovery() sets the starting recovery offset.
Drop superfluous rs_setup_recovery() and replace with __rs_setup_recovery().
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This fixes a flaw causing raid set extensions not to be synchronized
in case the MD bitmap resize required additional pages to be allocated.
Also share resize code in the raid constructor between
new size changes and those occuring during recovery.
Bump the target version to define the change and document
it in Documentation/admin-guide/device-mapper/dm-raid.rst.
Reported-by: Steve D <steved424@gmail.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add a size argument to rs_set_dev_and_array_sectors as prerequisite
to fixing grown device resynchronization not occuring when new MD
bitmap pages have to be allocated as a result of the extension in
a follwup patch.
Also avoid code duplication by using rs_set_rdev_sectors
in the aforementioned function.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Partitioned request-based devices cannot be used as underlying devices
for request-based DM because no partition offsets are added to each
incoming request. As such, until now, stacking on partitioned devices
would _always_ result in data corruption (e.g. wiping the partition
table, writing to other partitions, etc). Fix this by disallowing
request-based stacking on partitions.
While at it, since all .request_fn support has been removed from block
core, remove legacy dm-table code that differentiated between blk-mq and
.request_fn request-based.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
We have a test case as follow:
mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] \
--assume-clean --bitmap=internal
mdadm -S /dev/md1
mdadm -A /dev/md1 /dev/sd[b-c] --run --force
mdadm --zero /dev/sda
mdadm /dev/md1 -a /dev/sda
echo offline > /sys/block/sdc/device/state
echo offline > /sys/block/sdb/device/state
sleep 5
mdadm -S /dev/md1
echo running > /sys/block/sdb/device/state
echo running > /sys/block/sdc/device/state
mdadm -A /dev/md1 /dev/sd[a-c] --run --force
When we readd /dev/sda to the array, it started to do recovery.
After offline the other two disks in md1, the recovery have
been interrupted and superblock update info cannot be written
to the offline disks. While the spare disk (/dev/sda) can continue
to update superblock info.
After stopping the array and assemble it, we found the array
run fail, with the follow kernel message:
[ 172.986064] md: kicking non-fresh sdb from array!
[ 173.004210] md: kicking non-fresh sdc from array!
[ 173.022383] md/raid1:md1: active with 0 out of 4 mirrors
[ 173.022406] md1: failed to create bitmap (-5)
[ 173.023466] md: md1 stopped.
Since both sdb and sdc have the value of 'sb->events' smaller than
that in sda, they have been kicked from the array. However, the only
remained disk sda is in 'spare' state before stop and it cannot be
added to conf->mirrors[] array. In the end, raid array assemble
and run fail.
In fact, we can use the older disk sdb or sdc to assemble the array.
That means we should not choose the 'spare' disk as the fresh disk in
analyze_sbs().
To fix the problem, we do not compare superblock events when it is
a spare disk, as same as validate_super.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
If pers->make_request fails in md_flush_request(), the bio is lost. To
fix this, pass back a bool to indicate if the original make_request call
should continue to handle the I/O and instead of assuming the flush logic
will push it to completion.
Convert md_flush_request to return a bool and no longer calls the raid
driver's make_request function. If the return is true, then the md flush
logic has or will complete the bio and the md make_request call is done.
If false, then the md make_request function needs to keep processing like
it is a normal bio. Let the original call to md_handle_request handle any
need to retry sending the bio to the raid driver's make_request function
should it be needed.
Also mark md_flush_request and the make_request function pointer as
__must_check to issue warnings should these critical return values be
ignored.
Fixes: 2bc13b83e6 ("md: batch flush requests.")
Cc: stable@vger.kernel.org # # v4.19+
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
The first argument to WARN() is supposed to be a condition. The
original code will just print the mdname() instead of the full warning
message.
Fixes: c84a1372df ("md/raid0: avoid RAID0 data corruption due to layout confusion.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
-----BEGIN PGP SIGNATURE-----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=rvkw
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-10-18' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Keith that address deadlocks, double resets,
memory leaks, and other regression.
- Fixup elv_support_iosched() for bio based devices (Damien)
- Fixup for the ahci PCS quirk (Dan)
- Socket O_NONBLOCK handling fix for io_uring (me)
- Timeout sequence io_uring fixes (yangerkun)
- MD warning fix for parameter default_layout (Song)
- blkcg activation fixes (Tejun)
- blk-rq-qos node deletion fix (Tejun)
* tag 'for-linus-2019-10-18' of git://git.kernel.dk/linux-block:
nvme-pci: Set the prp2 correctly when using more than 4k page
io_uring: fix logic error in io_timeout
io_uring: fix up O_NONBLOCK handling for sockets
md/raid0: fix warning message for parameter default_layout
libata/ahci: Fix PCS quirk application
blk-rq-qos: fix first node deletion of rq_qos_del()
blkcg: Fix multiple bugs in blkcg_activate_policy()
io_uring: consider the overflow of sequence for timeout req
nvme-tcp: fix possible leakage during error flow
nvmet-loop: fix possible leakage during error flow
block: Fix elv_support_iosched()
nvme-tcp: Initialize sk->sk_ll_usec only with NET_RX_BUSY_POLL
nvme: Wait for reset state when required
nvme: Prevent resets during paused controller state
nvme: Restart request timers in resetting state
nvme: Remove ADMIN_ONLY state
nvme-pci: Free tagset if no IO queues
nvme: retain split access workaround for capability reads
nvme: fix possible deadlock when nvme_update_formats fails
GFP_NOWAIT allocation can fail anytime - it doesn't wait for memory being
available and it fails if the mempool is exhausted and there is not enough
memory.
If we go down this path:
map_bio -> mg_start -> alloc_migration -> mempool_alloc(GFP_NOWAIT)
we can see that map_bio() doesn't check the return value of mg_start(),
and the bio is leaked.
If we go down this path:
map_bio -> mg_start -> mg_lock_writes -> alloc_prison_cell ->
dm_bio_prison_alloc_cell_v2 -> mempool_alloc(GFP_NOWAIT) ->
mg_lock_writes -> mg_complete
the bio is ended with an error - it is unacceptable because it could
cause filesystem corruption if the machine ran out of memory
temporarily.
Change GFP_NOWAIT to GFP_NOIO, so that the mempool code will properly
wait until memory becomes available. mempool_alloc with GFP_NOIO can't
fail, so remove the code paths that deal with allocation failure.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The message should match the parameter, i.e. raid0.default_layout.
Fixes: c84a1372df ("md/raid0: avoid RAID0 data corruption due to layout confusion.")
Cc: NeilBrown <neilb@suse.de>
Reported-by: Ivan Topolsky <doktor.yak@gmail.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Commit 721b1d98fb ("dm snapshot: Fix excessive memory usage and
workqueue stalls") introduced a semaphore to limit the maximum number of
in-flight kcopyd (COW) jobs.
The implementation of this throttling mechanism is prone to a deadlock:
1. One or more threads write to the origin device causing COW, which is
performed by kcopyd.
2. At some point some of these threads might reach the s->cow_count
semaphore limit and block in down(&s->cow_count), holding a read lock
on _origins_lock.
3. Someone tries to acquire a write lock on _origins_lock, e.g.,
snapshot_ctr(), which blocks because the threads at step (2) already
hold a read lock on it.
4. A COW operation completes and kcopyd runs dm-snapshot's completion
callback, which ends up calling pending_complete().
pending_complete() tries to resubmit any deferred origin bios. This
requires acquiring a read lock on _origins_lock, which blocks.
This happens because the read-write semaphore implementation gives
priority to writers, meaning that as soon as a writer tries to enter
the critical section, no readers will be allowed in, until all
writers have completed their work.
So, pending_complete() waits for the writer at step (3) to acquire
and release the lock. This writer waits for the readers at step (2)
to release the read lock and those readers wait for
pending_complete() (the kcopyd thread) to signal the s->cow_count
semaphore: DEADLOCK.
The above was thoroughly analyzed and documented by Nikos Tsironis as
part of his initial proposal for fixing this deadlock, see:
https://www.redhat.com/archives/dm-devel/2019-October/msg00001.html
Fix this deadlock by reworking COW throttling so that it waits without
holding any locks. Add a variable 'in_progress' that counts how many
kcopyd jobs are running. A function wait_for_in_progress() will sleep if
'in_progress' is over the limit. It drops _origins_lock in order to
avoid the deadlock.
Reported-by: Guruswamy Basavaiah <guru2018@gmail.com>
Reported-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: Nikos Tsironis <ntsironis@arrikto.com>
Tested-by: Nikos Tsironis <ntsironis@arrikto.com>
Fixes: 721b1d98fb ("dm snapshot: Fix excessive memory usage and workqueue stalls")
Cc: stable@vger.kernel.org # v5.0+
Depends-on: 4a3f111a73a8c ("dm snapshot: introduce account_start_copy() and account_end_copy()")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This simple refactoring moves code for modifying the semaphore cow_count
into separate functions to prepare for changes that will extend these
methods to provide for a more sophisticated mechanism for COW
throttling.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
drivers/md/dm-clone-target.c:594:34: warning:
symbol '__hash_find' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-----BEGIN PGP SIGNATURE-----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=aAPP
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"Some later additions that weren't quite done for the first pull
request, and also a few fixes that have arrived since.
This contains:
- Kill silly pktcdvd warning on attempting to register a non-scsi
passthrough device (me)
- Use symbolic constants for the block t10 protection types, and
switch to handling it in core rather than in the drivers (Max)
- libahci platform missing node put fix (Nishka)
- Small series of fixes for BFQ (Paolo)
- Fix possible nbd crash (Xiubo)"
* tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block:
block: drop device references in bsg_queue_rq()
block: t10-pi: fix -Wswitch warning
pktcdvd: remove warning on attempting to register non-passthrough dev
ata: libahci_platform: Add of_node_put() before loop exit
nbd: fix possible page fault for nbd disk
nbd: rename the runtime flags as NBD_RT_ prefixed
block, bfq: push up injection only after setting service time
block, bfq: increase update frequency of inject limit
block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1
block, bfq: update inject limit only after injection occurred
block: centralize PI remapping logic to the block layer
block: use symbolic constants for t10_pi type
implementation details that do not belong in DM crypt. The wrapper
template for ESSIV generation that was factored out will also be used
by fscrypt in the future.
- Add root hash pkcs#7 signature verification to the DM verity target.
- Add a new "clone" DM target that allows for efficient remote
replication of a device.
- Enhance DM bufio's cache to be tailored to each client based on use.
Clients that make heavy use of the cache get more of it, and those
that use less have reduced cache usage.
- Add a new DM_GET_TARGET_VERSION ioctl to allow userspace to query the
version number of a DM target (even if the associated module isn't yet
loaded).
- Fix invalid memory access in DM zoned target.
- Fix the max_discard_sectors limit advertised by the DM raid target; it
was mistakenly storing the limit in bytes rather than sectors.
- Small optimizations and cleanups in DM writecache target.
- Various fixes and cleanups in DM core, DM raid1 and space map portion
of DM persistent data library.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl2D7ycTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWp9QCACwTkVGzPGMCbAaCVlCACo8B5JyY4OO
FNxucqUlt1MHKuBbzJd4XwNGlLg68xjMUKVPYPlgina7TaDl+wvlTbHchaJS8nak
x1zyhDSywy0F9f6HHiXJi/vshmAfa0xnIM6fQXVPM346S6xf9u7hqOJQMCrdvY92
w4FhuW9nVt5xizo8iC/3LzoWbhrWncT7dyZUZtG3/tmglhkEK7QwctlgQxcD7tXg
H1lhntQzHzpxQAVBefWWdw7ubuDd6XCHuQMaxRhyR++c62P3eKDR8ck9hhd3hZKv
E481gtxcsjKuYLxwULjqFJZaNFitWFNMJ7gppQyKRqCzn2zlGAL6npl8
=m6zD
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- crypto and DM crypt advances that allow the crypto API to reclaim
implementation details that do not belong in DM crypt. The wrapper
template for ESSIV generation that was factored out will also be used
by fscrypt in the future.
- Add root hash pkcs#7 signature verification to the DM verity target.
- Add a new "clone" DM target that allows for efficient remote
replication of a device.
- Enhance DM bufio's cache to be tailored to each client based on use.
Clients that make heavy use of the cache get more of it, and those
that use less have reduced cache usage.
- Add a new DM_GET_TARGET_VERSION ioctl to allow userspace to query the
version number of a DM target (even if the associated module isn't
yet loaded).
- Fix invalid memory access in DM zoned target.
- Fix the max_discard_sectors limit advertised by the DM raid target;
it was mistakenly storing the limit in bytes rather than sectors.
- Small optimizations and cleanups in DM writecache target.
- Various fixes and cleanups in DM core, DM raid1 and space map portion
of DM persistent data library.
* tag 'for-5.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits)
dm: introduce DM_GET_TARGET_VERSION
dm bufio: introduce a global cache replacement
dm bufio: remove old-style buffer cleanup
dm bufio: introduce a global queue
dm bufio: refactor adjust_total_allocated
dm bufio: call adjust_total_allocated from __link_buffer and __unlink_buffer
dm: add clone target
dm raid: fix updating of max_discard_sectors limit
dm writecache: skip writecache_wait for pmem mode
dm stats: use struct_size() helper
dm crypt: omit parsing of the encapsulated cipher
dm crypt: switch to ESSIV crypto API template
crypto: essiv - create wrapper template for ESSIV generation
dm space map common: remove check for impossible sm_find_free() return value
dm raid1: use struct_size() with kzalloc()
dm writecache: optimize performance by sorting the blocks for writeback_all
dm writecache: add unlikely for getting two block with same LBA
dm writecache: remove unused member pointer in writeback_struct
dm zoned: fix invalid memory access
dm verity: add root hash pkcs#7 signature verification
...
Currently t10_pi_prepare/t10_pi_complete functions are called during the
NVMe and SCSi layers command preparetion/completion, but their actual
place should be the block layer since T10-PI is a general data integrity
feature that is used by block storage protocols. Introduce .prepare_fn
and .complete_fn callbacks within the integrity profile that each type
can implement according to its needs.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Fixed to not call queue integrity functions if BLK_DEV_INTEGRITY
isn't defined in the config.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=Qt+h
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Two NVMe pull requests:
- ana log parse fix from Anton
- nvme quirks support for Apple devices from Ben
- fix missing bio completion tracing for multipath stack devices
from Hannes and Mikhail
- IP TOS settings for nvme rdma and tcp transports from Israel
- rq_dma_dir cleanups from Israel
- tracing for Get LBA Status command from Minwoo
- Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
- Some consolidation between the fabrics transports for handling
the CAP register
- reset race with ns scanning fix for fabrics (move fabrics
commands to a dedicated request queue with a different lifetime
from the admin request queue)."
- controller reset and namespace scan races fixes
- nvme discovery log change uevent support
- naming improvements from Keith
- multiple discovery controllers reject fix from James
- some regular cleanups from various people
- Series fixing (and re-fixing) null_blk debug printing and nr_devices
checks (André)
- A few pull requests from Song, with fixes from Andy, Guoqing,
Guilherme, Neil, Nigel, and Yufen.
- REQ_OP_ZONE_RESET_ALL support (Chaitanya)
- Bio merge handling unification (Christoph)
- Pick default elevator correctly for devices with special needs
(Damien)
- Block stats fixes (Hou)
- Timeout and support devices nbd fixes (Mike)
- Series fixing races around elevator switching and device add/remove
(Ming)
- sed-opal cleanups (Revanth)
- Per device weight support for BFQ (Fam)
- Support for blk-iocost, a new model that can properly account cost of
IO workloads. (Tejun)
- blk-cgroup writeback fixes (Tejun)
- paride queue init fixes (zhengbin)
- blk_set_runtime_active() cleanup (Stanley)
- Block segment mapping optimizations (Bart)
- lightnvm fixes (Hans/Minwoo/YueHaibing)
- Various little fixes and cleanups
* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
null_blk: format pr_* logs with pr_fmt
null_blk: match the type of parameter nr_devices
null_blk: do not fail the module load with zero devices
block: also check RQF_STATS in blk_mq_need_time_stamp()
block: make rq sector size accessible for block stats
bfq: Fix bfq linkage error
raid5: use bio_end_sector in r5_next_bio
raid5: remove STRIPE_OPS_REQ_PENDING
md: add feature flag MD_FEATURE_RAID0_LAYOUT
md/raid0: avoid RAID0 data corruption due to layout confusion.
raid5: don't set STRIPE_HANDLE to stripe which is in batch list
raid5: don't increment read_errors on EILSEQ return
nvmet: fix a wrong error status returned in error log page
nvme: send discovery log page change events to userspace
nvme: add uevent variables for controller devices
nvme: enable aen regardless of the presence of I/O queues
nvme-fabrics: allow discovery subsystems accept a kato
nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
nvme: Remove redundant assignment of cq vector
nvme: Assign subsys instance from first ctrl
...
This commit introduces a new ioctl DM_GET_TARGET_VERSION. It will load a
target that is specified in the "name" entry in the parameter structure
and return its version.
This functionality is intended to be used by cryptsetup, so that it can
query kernel capabilities before activating the device.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This commit introduces a global cache replacement (instead of per-client
cleanup).
If one bufio client uses the cache heavily and another client is not using
it, we want to let the first client use most of the cache. The old
algorithm would partition the cache equally betwen the clients and that is
sub-optimal.
For cache replacement, we use the clock algorithm because it doesn't
require taking any lock when the buffer is accessed.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Actually, we calculate bio's end sector here, so use the common
way for the purpose.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
This stripe state is not used anymore after commit 51acbcec6c
("md: remove CONFIG_MULTICORE_RAID456"), so remove the obsoleted
state.
gjiang@nb01257:~/md$ grep STRIPE_OPS_REQ_PENDING drivers/md/ -r
drivers/md/raid5.c: (1 << STRIPE_OPS_REQ_PENDING) |
drivers/md/raid5.h: STRIPE_OPS_REQ_PENDING,
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Due to a bug introduced in Linux 3.14 we cannot determine the
correctly layout for a multi-zone RAID0 array - there are two
possibilities.
It is possible to tell the kernel which to chose using a module
parameter, but this can be clumsy to use. It would be best if
the choice were recorded in the metadata.
So add a feature flag for this purpose.
If it is set, then the 'layout' field of the superblock is used
to determine which layout to use.
If this flag is not set, then mddev->layout gets set to -1,
which causes the module parameter to be required.
Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
If the drives in a RAID0 are not all the same size, the array is
divided into zones.
The first zone covers all drives, to the size of the smallest.
The second zone covers all drives larger than the smallest, up to
the size of the second smallest - etc.
A change in Linux 3.14 unintentionally changed the layout for the
second and subsequent zones. All the correct data is still stored, but
each chunk may be assigned to a different device than in pre-3.14 kernels.
This can lead to data corruption.
It is not possible to determine what layout to use - it depends which
kernel the data was written by.
So we add a module parameter to allow the old (0) or new (1) layout to be
specified, and refused to assemble an affected array if that parameter is
not set.
Fixes: 20d0189b10 ("block: Introduce new bio_split()")
cc: stable@vger.kernel.org (3.14+)
Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
If stripe in batch list is set with STRIPE_HANDLE flag, then the stripe
could be set with STRIPE_ACTIVE by the handle_stripe function. And if
error happens to the batch_head at the same time, break_stripe_batch_list
is called, then below warning could happen (the same report in [1]), it
means a member of batch list was set with STRIPE_ACTIVE.
[7028915.431770] stripe state: 2001
[7028915.431815] ------------[ cut here ]------------
[7028915.431828] WARNING: CPU: 18 PID: 29089 at drivers/md/raid5.c:4614 break_stripe_batch_list+0x203/0x240 [raid456]
[...]
[7028915.431879] CPU: 18 PID: 29089 Comm: kworker/u82:5 Tainted: G O 4.14.86-1-storage #4.14.86-1.2~deb9
[7028915.431881] Hardware name: Supermicro SSG-2028R-ACR24L/X10DRH-iT, BIOS 3.1 06/18/2018
[7028915.431888] Workqueue: raid5wq raid5_do_work [raid456]
[7028915.431890] task: ffff9ab0ef36d7c0 task.stack: ffffb72926f84000
[7028915.431896] RIP: 0010:break_stripe_batch_list+0x203/0x240 [raid456]
[7028915.431898] RSP: 0018:ffffb72926f87ba8 EFLAGS: 00010286
[7028915.431900] RAX: 0000000000000012 RBX: ffff9aaa84a98000 RCX: 0000000000000000
[7028915.431901] RDX: 0000000000000000 RSI: ffff9ab2bfa15458 RDI: ffff9ab2bfa15458
[7028915.431902] RBP: ffff9aaa8fb4e900 R08: 0000000000000001 R09: 0000000000002eb4
[7028915.431903] R10: 00000000ffffffff R11: 0000000000000000 R12: ffff9ab1736f1b00
[7028915.431904] R13: 0000000000000000 R14: ffff9aaa8fb4e900 R15: 0000000000000001
[7028915.431906] FS: 0000000000000000(0000) GS:ffff9ab2bfa00000(0000) knlGS:0000000000000000
[7028915.431907] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[7028915.431908] CR2: 00007ff953b9f5d8 CR3: 0000000bf4009002 CR4: 00000000003606e0
[7028915.431909] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[7028915.431910] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[7028915.431910] Call Trace:
[7028915.431923] handle_stripe+0x8e7/0x2020 [raid456]
[7028915.431930] ? __wake_up_common_lock+0x89/0xc0
[7028915.431935] handle_active_stripes.isra.58+0x35f/0x560 [raid456]
[7028915.431939] raid5_do_work+0xc6/0x1f0 [raid456]
Also commit 59fc630b8b ("RAID5: batch adjacent full stripe write")
said "If a stripe is added to batch list, then only the first stripe
of the list should be put to handle_list and run handle_stripe."
So don't set STRIPE_HANDLE to stripe which is already in batch list,
otherwise the stripe could be put to handle_list and run handle_stripe,
then the above warning could be triggered.
[1]. https://www.spinics.net/lists/raid/msg62552.html
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
While MD continues to count read errors returned by the lower layer.
If those errors are -EILSEQ, instead of -EIO, it should NOT increase
the read_errors count.
When RAID6 is set up on dm-integrity target that detects massive
corruption, the leg will be ejected from the array. Even if the
issue is correctable with a sector re-write and the array has
necessary redundancy to correct it.
The leg is ejected because it runs up the rdev->read_errors beyond
conf->max_nr_stripes. The return status in dm-drypt when there is
a data integrity error is -EILSEQ (BLK_STS_PROTECTION).
Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Remove code that cleans up buffers if the cache size grows over the limit.
The next commit will introduce a new global cleanup.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Rename param_spinlock to global_spinlock and introduce a global queue of
all used buffers. The queue will be used in the following commits.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Refactor adjust_total_allocated() so that it takes a bool argument
indicating if it should add or subtract the buffer size.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Move the call to adjust_total_allocated() to __link_buffer() and
__unlink_buffer() so that only used buffers are counted. Reserved
buffers are not.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Unit of 'chunk_size' is byte, instead of sector, so fix it by setting
the queue_limits' max_discard_sectors to rs->md.chunk_sectors. Also,
rename chunk_size to chunk_size_bytes.
Without this fix, too big max_discard_sectors is applied on the request
queue of dm-raid, finally raid code has to split the bio again.
This re-split done by raid causes the following nested clone_endio:
1) one big bio 'A' is submitted to dm queue, and served as the original
bio
2) one new bio 'B' is cloned from the original bio 'A', and .map()
is run on this bio of 'B', and B's original bio points to 'A'
3) raid code sees that 'B' is too big, and split 'B' and re-submit
the remainded part of 'B' to dm-raid queue via generic_make_request().
4) now dm will handle 'B' as new original bio, then allocate a new
clone bio of 'C' and run .map() on 'C'. Meantime C's original bio
points to 'B'.
5) suppose now 'C' is completed by raid directly, then the following
clone_endio() is called recursively:
clone_endio(C)
->clone_endio(B) #B is original bio of 'C'
->bio_endio(A)
'A' can be big enough to make hundreds of nested clone_endio(), then
stack can be corrupted easily.
Fixes: 61697a6abd ("dm: eliminate 'split_discard_bios' flag from DM target interface")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When elevator_init_mq() is called from blk_mq_init_allocated_queue(),
the only information known about the device is the number of hardware
queues as the block device scan by the device driver is not completed
yet for most drivers. The device type and elevator required features
are not set yet, preventing to correctly select the default elevator
most suitable for the device.
This currently affects all multi-queue zoned block devices which default
to the "none" elevator instead of the required "mq-deadline" elevator.
These drives currently include host-managed SMR disks connected to a
smartpqi HBA and null_blk block devices with zoned mode enabled.
Upcoming NVMe Zoned Namespace devices will also be affected.
Fix this by adding the boolean elevator_init argument to
blk_mq_init_allocated_queue() to control the execution of
elevator_init_mq(). Two cases exist:
1) elevator_init = false is used for calls to
blk_mq_init_allocated_queue() within blk_mq_init_queue(). In this
case, a call to elevator_init_mq() is added to __device_add_disk(),
resulting in the delayed initialization of the queue elevator
after the device driver finished probing the device information. This
effectively allows elevator_init_mq() access to more information
about the device.
2) elevator_init = true preserves the current behavior of initializing
the elevator directly from blk_mq_init_allocated_queue(). This case
is used for the special request based DM devices where the device
gendisk is created before the queue initialization and device
information (e.g. queue limits) is already known when the queue
initialization is executed.
Additionally, to make sure that the elevator initialization is never
done while requests are in-flight (there should be none when the device
driver calls device_add_disk()), freeze and quiesce the device request
queue before calling blk_mq_init_sched() in elevator_init_mq().
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The array bio_in_progress[2] only have chance to be increased and
decreased with ssd mode. For pmem mode, they are not involved at all.
So skip writecache_wait_for_ios in writecache_flush for pmem.
Suggested-by: Doris Yu <tyu1@lenovo.com>
Signed-off-by: Huaisheng Ye <yehs1@lenovo.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct dm_stat {
...
struct dm_stat_shared stat_shared[0];
};
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
So, replace the following form:
sizeof(struct dm_stat) + (size_t)n_entries * sizeof(struct dm_stat_shared)
with:
struct_size(s, stat_shared, n_entries)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When run test case:
mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] --assume-clean --bitmap=internal
mdadm -S /dev/md1
mdadm -A /dev/md1 /dev/sd[b-c] --run --force
mdadm --zero /dev/sda
mdadm /dev/md1 -a /dev/sda
echo offline > /sys/block/sdc/device/state
echo offline > /sys/block/sdb/device/state
sleep 5
mdadm -S /dev/md1
echo running > /sys/block/sdb/device/state
echo running > /sys/block/sdc/device/state
mdadm -A /dev/md1 /dev/sd[a-c] --run --force
mdadm run fail with kernel message as follow:
[ 172.986064] md: kicking non-fresh sdb from array!
[ 173.004210] md: kicking non-fresh sdc from array!
[ 173.022383] md/raid1:md1: active with 0 out of 4 mirrors
[ 173.022406] md1: failed to create bitmap (-5)
In fact, when active disk in raid1 array less than one, we
need to return fail in raid1_run().
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Currently md raid0/linear are not provided with any mechanism to validate
if an array member got removed or failed. The driver keeps sending BIOs
regardless of the state of array members, and kernel shows state 'clean'
in the 'array_state' sysfs attribute. This leads to the following
situation: if a raid0/linear array member is removed and the array is
mounted, some user writing to this array won't realize that errors are
happening unless they check dmesg or perform one fsync per written file.
Despite udev signaling the member device is gone, 'mdadm' cannot issue the
STOP_ARRAY ioctl successfully, given the array is mounted.
In other words, no -EIO is returned and writes (except direct ones) appear
normal. Meaning the user might think the wrote data is correctly stored in
the array, but instead garbage was written given that raid0 does stripping
(and so, it requires all its members to be working in order to not corrupt
data). For md/linear, writes to the available members will work fine, but
if the writes go to the missing member(s), it'll cause a file corruption
situation, whereas the portion of the writes to the missing devices aren't
written effectively.
This patch changes this behavior: we check if the block device's gendisk
is UP when submitting the BIO to the array member, and if it isn't, we flag
the md device as MD_BROKEN and fail subsequent I/Os to that device; a read
request to the array requiring data from a valid member is still completed.
While flagging the device as MD_BROKEN, we also show a rate-limited warning
in the kernel log.
A new array state 'broken' was added too: it mimics the state 'clean' in
every aspect, being useful only to distinguish if the array has some member
missing. We rely on the MD_BROKEN flag to put the array in the 'broken'
state. This state cannot be written in 'array_state' as it just shows
one or more members of the array are missing but acts like 'clean', it
wouldn't make sense to write it.
With this patch, the filesystem reacts much faster to the event of missing
array member: after some I/O errors, ext4 for instance aborts the journal
and prevents corruption. Without this change, we're able to keep writing
in the disk and after a machine reboot, e2fsck shows some severe fs errors
that demand fixing. This patch was tested in ext4 and xfs filesystems, and
requires a 'mdadm' counterpart to handle the 'broken' state.
Cc: Song Liu <songliubraving@fb.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Only the ESSIV IV generation mode used to use cc->cipher so it could
instantiate the bare cipher used to encrypt the IV. However, this is
now taken care of by the ESSIV template, and so no users of cc->cipher
remain. So remove it altogether.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Replace the explicit ESSIV handling in the dm-crypt driver with calls
into the crypto API, which now possesses the capability to perform
this processing within the crypto subsystem.
Note that we reorder the AEAD cipher_api string parsing with the TFM
instantiation: this is needed because cipher_api is mangled by the
ESSIV handling, and throws off the parsing of "authenc(" otherwise.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The race was when a thread using closure_sync() notices cl->s->done == 1
before the thread calling closure_put() calls wake_up_process(). Then,
it's possible for that thread to return and exit just before
wake_up_process() is called - so we're trying to wake up a process that
no longer exists.
rcu_read_lock() is sufficient to protect against this, as there's an rcu
barrier somewhere in the process teardown path.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The copy_to_user() function returns the number of bytes remaining to be
copied, but the intention here was to return -EFAULT if the copy fails.
Fixes: cafe563591 ("bcache: A block layer cache")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Read /sys/fs/bcache/<uuid>/cacheN/priority_stats can take very long
time with huge cache after long run.
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Tested-by: Heitor Alves de Siqueira <halves@canonical.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Often limits can be changed by admin. When discussing such things
it helps if you can provide "self-sustained" facts. Also
sometimes the admin thinks he changed a limit, but it did not
take effect for some reason or he changed the wrong thing.
V3: Only pr_warn when Faulty is 0.
V2: Add read_errors value to pr_warn.
Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Until revalidate_disk() has completed, the size of a new md array will
appear to be zero.
So we shouldn't report, through array_state, that the array is active
until that time.
udev rules check array_state to see if the array is ready. As soon as
it appear to be zero, fsck can be run. If it find the size to be
zero, it will fail.
So add a new flag to provide an interlock between do_md_run() and
array_state_show(). This flag is set while do_md_run() is active and
it prevents array_state_show() from reporting that the array is
active.
Before do_md_run() is called, ->pers will be NULL so array is
definitely not active.
After do_md_run() is called, revalidate_disk() will have run and the
array will be completely ready.
We also move various sysfs_notify*() calls out of md_run() into
do_md_run() after MD_NOT_READY is cleared. This ensure the
information is ready before the notification is sent.
Prior to v4.12, array_state_show() was called with the
mddev->reconfig_mutex held, which provided exclusion with do_md_run().
Note that MD_NOT_READY cleared twice. This is deliberate to cover
both success and error paths with minimal noise.
Fixes: b7b17c9b67 ("md: remove mddev_lock() from md_attr_show()")
Cc: stable@vger.kernel.org (v4.12++)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Since commit 4ad23a9764 ("MD: use per-cpu counter for
writes_pending"), set_in_sync() is substantially more expensive: it
can wait for a full RCU grace period which can be 10s of milliseconds.
So we should only call it when the cost is justified.
md_check_recovery() currently calls set_in_sync() every time it finds
anything to do (on non-external active arrays). For an array
performing resync or recovery, this will be quite often.
Each call will introduce a delay to the md thread, which can noticeable
affect IO submission latency.
In md_check_recovery() we only need to call set_in_sync() if
'safemode' was non-zero at entry, meaning that there has been not
recent IO. So we save this "safemode was nonzero" state, and only
call set_in_sync() if it was non-zero.
This measurably reduces mean and maximum IO submission latency during
resync/recovery.
Reported-and-tested-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Fixes: 4ad23a9764 ("MD: use per-cpu counter for writes_pending")
Cc: stable@vger.kernel.org (v4.12+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
The function sm_find_free() just returns -ENOSPC and 0.
So remove lone caller's check for some other error.
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct mirror_set {
...
struct mirror mirror[0];
};
size = sizeof(struct mirror_set) + count * sizeof(struct mirror);
instance = kzalloc(size, GFP_KERNEL)
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kzalloc(struct_size(instance, mirror, count), GFP_KERNEL)
Notice that, in this case, variable len is not necessary, hence it
is removed.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
During the process of writeback, the blocks, which have been placed in wbl.list
for writeback soon, are partially ordered for the contiguous ones.
When writeback_all has been set, for most cases, also by default, there will be
a lot of blocks in pmem need to writeback at the same time.
For this case, we could optimize the performance by sorting all blocks in
wbl.list. writecache_writeback doesn't need to get blocks from the tail of
wc->lru, whereas from the first rb_node from the rb_tree.
The benefit is that, writecache_writeback doesn't need to have any cost to sort
the blocks, because of all blocks are incremental originally in rb_tree.
There will be a writecache_flush when writeback_all begins to work, that will
eliminate duplicate blocks in cache by committed/uncommitted.
Testing platform: Thinksystem SR630 with persistent memory.
The cache comes from pmem, which has 1006MB size. The origin device is HDD, 2GB
of which for using.
Testing steps:
1) dmsetup create mycache --table '0 4194304 writecache p /dev/sdb1 /dev/pmem4 4096 0'
2) fio -filename=/dev/mapper/mycache -direct=1 -iodepth=20 -rw=randwrite
-ioengine=libaio -bs=4k -loops=1 -size=2g -group_reporting -name=mytest1
3) time dmsetup message /dev/mapper/mycache 0 flush
Here is the results below,
With the patch:
# fio -filename=/dev/mapper/mycache -direct=1 -iodepth=20 -rw=randwrite
-ioengine=libaio -bs=4k -loops=1 -size=2g -group_reporting -name=mytest1
iops : min= 1582, max=199470, avg=5305.94, stdev=21273.44, samples=197
# time dmsetup message /dev/mapper/mycache 0 flush
real 0m44.020s
user 0m0.002s
sys 0m0.003s
Without the patch:
# fio -filename=/dev/mapper/mycache -direct=1 -iodepth=20 -rw=randwrite
-ioengine=libaio -bs=4k -loops=1 -size=2g -group_reporting -name=mytest1
iops : min= 1202, max=197650, avg=4968.67, stdev=20480.17, samples=211
# time dmsetup message /dev/mapper/mycache 0 flush
real 1m39.221s
user 0m0.001s
sys 0m0.003s
I also have checked the data accuracy with this patch by making EXT4 filesystem
on mycache, then mount it for checking md5 of files on that.
The test result is positive, with this patch it could save more than half of time
when writeback_all.
Signed-off-by: Huaisheng Ye <yehs1@lenovo.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
In function writecache_writeback, entries g and f has same original
sector only happens at entry f has been committed, but entry g has
NOT yet.
The probability of this happening is very low in the following
256 blocks at most of entry e.
Signed-off-by: Huaisheng Ye <yehs1@lenovo.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The stucture member pointer page in writeback_struct never has been
used actually. Remove it.
Signed-off-by: Huaisheng Ye <yehs1@lenovo.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The verification is to support cases where the root hash is not secured
by Trusted Boot, UEFI Secureboot or similar technologies.
One of the use cases for this is for dm-verity volumes mounted after
boot, the root hash provided during the creation of the dm-verity volume
has to be secure and thus in-kernel validation implemented here will be
used before we trust the root hash and allow the block device to be
created.
The signature being provided for verification must verify the root hash
and must be trusted by the builtin keyring for verification to succeed.
The hash is added as a key of type "user" and the description is passed
to the kernel so it can look it up and use it for verification.
Adds CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG which can be turned on if root
hash verification is needed.
Kernel commandline dm_verity module parameter 'require_signatures' will
indicate whether to force root hash signature verification (for all dm
verity volumes).
Signed-off-by: Jaskaran Khurana <jaskarankhurana@linux.microsoft.com>
Tested-and-Reviewed-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Instead of instantiating a separate cipher to perform the encryption
needed to produce the IV, reuse the skcipher used for the block data
and invoke it one additional time for each block to encrypt a zero
vector and use the output as the IV.
For CBC mode, this is equivalent to using the bare block cipher, but
without the risk of ending up with a non-time invariant implementation
of AES when the skcipher itself is time variant (e.g., arm64 without
Crypto Extensions has a NEON based time invariant implementation of
cbc(aes) but no time invariant implementation of the core cipher other
than aes-ti, which is not enabled by default).
This approach is a compromise between dm-crypt API flexibility and
reducing dependence on parts of the crypto API that should not usually
be exposed to other subsystems, such as the bare cipher API.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Currently, if we pass too high sector number to dm_table_find_target, it
returns zeroed dm_target structure and callers test if the structure is
zeroed with the macro dm_target_is_valid.
However, returning NULL is common practice to indicate errors.
This patch refactors the dm code, so that dm_table_find_target returns
NULL and its callers test the returned value for NULL. The macro
dm_target_is_valid is deleted. In alloc_targets, we no longer allocate an
extra zeroed target.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If the sector number is too high, dm_table_find_target() should return a
pointer to a zeroed dm_target structure (the caller should test it with
dm_target_is_valid).
However, for some table sizes, the code in dm_table_find_target() that
performs btree lookup will access out of bound memory structures.
Fix this bug by testing the sector number at the beginning of
dm_table_find_target(). Also, add an "inline" keyword to the function
dm_table_get_size() because this is a hot path.
Fixes: 512875bd96 ("dm: table detect io beyond device")
Cc: stable@vger.kernel.org
Reported-by: Zhang Tao <kontais@zoho.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
In commit 6096d91af0 ("dm space map metadata: fix occasional leak
of a metadata block on resize"), we refactor the commit logic to a new
function 'apply_bops'. But when that logic was replaced in out() the
return value was not stored. This may lead out() returning a wrong
value to the caller.
Fixes: 6096d91af0 ("dm space map metadata: fix occasional leak of a metadata block on resize")
Cc: stable@vger.kernel.org
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When btree_split_beneath() splits a node to two new children, it will
allocate two blocks: left and right. If right block's allocation
failed, the left block will be unlocked and marked dirty. If this
happened, the left block'ss content is zero, because it wasn't
initialized with the btree struct before the attempot to allocate the
right block. Upon return, when flushing the left block to disk, the
validator will fail when check this block. Then a BUG_ON is raised.
Fix this by completely initializing the left block before allocating and
initializing the right block.
Fixes: 4dcb8b57df ("dm btree: fix leak of bufio-backed block in btree_split_beneath error path")
Cc: stable@vger.kernel.org
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If rs_prepare_reshape() fails, no cleanup is executed, leading to
leak of the raid_set structure allocated at the beginning of
raid_ctr(). To fix this issue, go to the label 'bad' if the error
occurs.
Fixes: 11e4723206 ("dm raid: stop keeping raid set frozen altogether")
Cc: stable@vger.kernel.org
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This function is supposed to return error pointers so it matches the
dmz_get_rnd_zone_for_reclaim() function. The current code could lead to
a NULL dereference in dmz_do_reclaim()
Fixes: b234c6d7a7 ("dm zoned: improve error handling in reclaim")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Change the "frontend" dust_remove_block, dust_add_block, and
dust_query_block functions to store the "dust block number", instead
of the sector number corresponding to the "dust block number".
For the "backend" functions dust_map_read and dust_map_write,
right-shift by sect_per_block_shift. This fixes the inability to
emulate failure beyond the first sector of each "dust block" (for
devices with a "dust block size" larger than 512 bytes).
Fixes: e4f3fabd67 ("dm: add dust target")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan Gurney <bgurney@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fix a crash that was introduced by the commit 724376a04d. The crash is
reported here: https://gitlab.com/cryptsetup/cryptsetup/issues/468
When reading from the integrity device, the function
dm_integrity_map_continue calls find_journal_node to find out if the
location to read is present in the journal. Then, it calculates how many
sectors are consecutively stored in the journal. Then, it locks the range
with add_new_range and wait_and_add_new_range.
The problem is that during wait_and_add_new_range, we hold no locks (we
don't hold ic->endio_wait.lock and we don't hold a range lock), so the
journal may change arbitrarily while wait_and_add_new_range sleeps.
The code then goes to __journal_read_write and hits
BUG_ON(journal_entry_get_sector(je) != logical_sector); because the
journal has changed.
In order to fix this bug, we need to re-check the journal location after
wait_and_add_new_range. We restrict the length to one block in order to
not complicate the code too much.
Fixes: 724376a04d ("dm integrity: implement fair range locks")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm-zoned is observed to lock up or livelock in case of hardware
failure or some misconfiguration of the backing zoned device.
This patch adds a new dm-zoned target function that checks the status of
the backing device. If the request queue of the backing device is found
to be in dying state or the SCSI backing device enters offline state,
the health check code sets a dm-zoned target flag prompting all further
incoming I/O to be rejected. In order to detect backing device failures
timely, this new function is called in the request mapping path, at the
beginning of every reclaim run and before performing any metadata I/O.
The proper way out of this situation is to do
dmsetup remove <dm-zoned target>
and recreate the target when the problem with the backing device
is resolved.
Fixes: 3b1a94c88b ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Some errors are ignored in the I/O path during queueing chunks
for processing by chunk works. Since at least these errors are
transient in nature, it should be possible to retry the failed
incoming commands.
The fix -
Errors that can happen while queueing chunks are carried upwards
to the main mapping function and it now returns DM_MAPIO_REQUEUE
for any incoming requests that can not be properly queued.
Error logging/debug messages are added where needed.
Fixes: 3b1a94c88b ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
There are several places in reclaim code where errors are not
propagated to the main function, dmz_reclaim(). This function
is responsible for unlocking zones that might be still locked
at the end of any failed reclaim iterations. As the result,
some device zones may be left permanently locked for reclaim,
degrading target's capability to reclaim zones.
This patch fixes these issues as follows -
Make sure that dmz_reclaim_buf(), dmz_reclaim_seq_data() and
dmz_reclaim_rnd_data() return error codes to the caller.
dmz_reclaim() function is renamed to dmz_do_reclaim() to avoid
clashing with "struct dmz_reclaim" and is modified to return the
error to the caller.
dmz_get_zone_for_reclaim() now returns an error instead of NULL
pointer and reclaim code checks for that error.
Error logging/debug messages are added where necessary.
Fixes: 3b1a94c88b ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This patch fixes a problem in dm-kcopyd that may leave jobs in
complete queue indefinitely in the event of backing storage failure.
This behavior has been observed while running 100% write file fio
workload against an XFS volume created on top of a dm-zoned target
device. If the underlying storage of dm-zoned goes to offline state
under I/O, kcopyd sometimes never issues the end copy callback and
dm-zoned reclaim work hangs indefinitely waiting for that completion.
This behavior was traced down to the error handling code in
process_jobs() function that places the failed job to complete_jobs
queue, but doesn't wake up the job handler. In case of backing device
failure, all outstanding jobs may end up going to complete_jobs queue
via this code path and then stay there forever because there are no
more successful I/O jobs to wake up the job handler.
This patch adds a wake() call to always wake up kcopyd job wait queue
for all I/O jobs that fail before dm_io() gets called for that job.
The patch also sets the write error status in all sub jobs that are
failed because their master job has failed.
Fixes: b73c67c2cb ("dm kcopyd: add sequential write feature")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Revert the commit bd293d071f. The proper
fix has been made available with commit d0a255e795 ("loop: set
PF_MEMALLOC_NOIO for the worker thread").
Note that the fix offered by commit bd293d071f doesn't really prevent
the deadlock from occuring - if we look at the stacktrace reported by
Junxiao Bi, we see that it hangs in bit_wait_io and not on the mutex -
i.e. it has already successfully taken the mutex. Changing the mutex
from mutex_lock to mutex_trylock won't help with deadlocks that happen
afterwards.
PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0"
#0 [ffff8813dedfb938] __schedule at ffffffff8173f405
#1 [ffff8813dedfb990] schedule at ffffffff8173fa27
#2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec
#3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186
#4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f
#5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8
#6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81
#7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio]
#8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio]
#9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio]
#10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce
#11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778
#12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f
#13 [ffff8813dedfbec0] kthread at ffffffff810a8428
#14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: bd293d071f ("dm bufio: fix deadlock with loop device")
Depends-on: d0a255e795 ("loop: set PF_MEMALLOC_NOIO for the worker thread")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Au30
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190809' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Revert of a bcache patch that caused an oops for some (Coly)
- ata rb532 unused warning fix (Gustavo)
- AoE kernel crash fix (He)
- Error handling fixup for blkdev_get() (Jan)
- libata read/write translation and SFF PIO fix (me)
- Use after free and error handling fix for O_DIRECT fragments. There's
still a nowait + sync oddity in there, we'll nail that start next
week. If all else fails, I'll queue a revert of the NOWAIT change.
(me)
- Loop GFP_KERNEL -> GFP_NOIO deadlock fix (Mikulas)
- Two BFQ regression fixes that caused crashes (Paolo)
* tag 'for-linus-20190809' of git://git.kernel.dk/linux-block:
bcache: Revert "bcache: use sysfs_match_string() instead of __sysfs_match_string()"
loop: set PF_MEMALLOC_NOIO for the worker thread
bdev: Fixup error handling in blkdev_get()
block, bfq: handle NULL return value by bfq_init_rq()
block, bfq: move update of waker and woken list to queue freeing
block, bfq: reset last_completed_rq_bfqq if the pointed queue is freed
block: aoe: Fix kernel crash due to atomic sleep when exiting
libata: add SG safety checks in SFF pio transfers
libata: have ata_scsi_rw_xlat() fail invalid passthrough requests
block: fix O_DIRECT error handling for bio fragments
ata: rb532_cf: Fix unused variable warning in rb532_pata_driver_probe
