Pull user namespace updates from Eric Biederman:
"Long ago and far away when user namespaces where young it was realized
that allowing fresh mounts of proc and sysfs with only user namespace
permissions could violate the basic rule that only root gets to decide
if proc or sysfs should be mounted at all.
Some hacks were put in place to reduce the worst of the damage could
be done, and the common sense rule was adopted that fresh mounts of
proc and sysfs should allow no more than bind mounts of proc and
sysfs. Unfortunately that rule has not been fully enforced.
There are two kinds of gaps in that enforcement. Only filesystems
mounted on empty directories of proc and sysfs should be ignored but
the test for empty directories was insufficient. So in my tree
directories on proc, sysctl and sysfs that will always be empty are
created specially. Every other technique is imperfect as an ordinary
directory can have entries added even after a readdir returns and
shows that the directory is empty. Special creation of directories
for mount points makes the code in the kernel a smidge clearer about
it's purpose. I asked container developers from the various container
projects to help test this and no holes were found in the set of mount
points on proc and sysfs that are created specially.
This set of changes also starts enforcing the mount flags of fresh
mounts of proc and sysfs are consistent with the existing mount of
proc and sysfs. I expected this to be the boring part of the work but
unfortunately unprivileged userspace winds up mounting fresh copies of
proc and sysfs with noexec and nosuid clear when root set those flags
on the previous mount of proc and sysfs. So for now only the atime,
read-only and nodev attributes which userspace happens to keep
consistent are enforced. Dealing with the noexec and nosuid
attributes remains for another time.
This set of changes also addresses an issue with how open file
descriptors from /proc/<pid>/ns/* are displayed. Recently readlink of
/proc/<pid>/fd has been triggering a WARN_ON that has not been
meaningful since it was added (as all of the code in the kernel was
converted) and is not now actively wrong.
There is also a short list of issues that have not been fixed yet that
I will mention briefly.
It is possible to rename a directory from below to above a bind mount.
At which point any directory pointers below the renamed directory can
be walked up to the root directory of the filesystem. With user
namespaces enabled a bind mount of the bind mount can be created
allowing the user to pick a directory whose children they can rename
to outside of the bind mount. This is challenging to fix and doubly
so because all obvious solutions must touch code that is in the
performance part of pathname resolution.
As mentioned above there is also a question of how to ensure that
developers by accident or with purpose do not introduce exectuable
files on sysfs and proc and in doing so introduce security regressions
in the current userspace that will not be immediately obvious and as
such are likely to require breaking userspace in painful ways once
they are recognized"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
vfs: Remove incorrect debugging WARN in prepend_path
mnt: Update fs_fully_visible to test for permanently empty directories
sysfs: Create mountpoints with sysfs_create_mount_point
sysfs: Add support for permanently empty directories to serve as mount points.
kernfs: Add support for always empty directories.
proc: Allow creating permanently empty directories that serve as mount points
sysctl: Allow creating permanently empty directories that serve as mountpoints.
fs: Add helper functions for permanently empty directories.
vfs: Ignore unlocked mounts in fs_fully_visible
mnt: Modify fs_fully_visible to deal with locked ro nodev and atime
mnt: Refactor the logic for mounting sysfs and proc in a user namespace
Add two functions sysfs_create_mount_point and
sysfs_remove_mount_point that hang a permanently empty directory off
of a kobject or remove a permanently emptpy directory hanging from a
kobject. Export these new functions so modular filesystems can use
them.
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
If count == 0 bytes are requested by a reader, sysfs_kf_bin_read()
deliberately returns 0 without passing a potentially harmful value to
some externally defined underlying battr->read() function.
However in case of (pos == size && count) the next clause always sets
count to 0 and this value is handed over to battr->read().
The change intends to make obsolete (and remove later) a redundant
sanity check in battr->read(), if it is present, or add more
protection to struct bin_attribute users, who does not care about
input arguments.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sentence "Returns 0 on success or error" might be misinterpreted as
"the function will always returns 0", make it less ambiguous.
Also, use the word "failure" as the contrary of "success".
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fresh mounts of proc and sysfs are a very special case that works very
much like a bind mount. Unfortunately the current structure can not
preserve the MNT_LOCK... mount flags. Therefore refactor the logic
into a form that can be modified to preserve those lock bits.
Add a new filesystem flag FS_USERNS_VISIBLE that requires some mount
of the filesystem be fully visible in the current mount namespace,
before the filesystem may be mounted.
Move the logic for calling fs_fully_visible from proc and sysfs into
fs/namespace.c where it has greater access to mount namespace state.
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
For sysfs file attributes, only read and write permissions make sense.
Mask provided attribute permissions accordingly and send a warning
to the console if invalid permission bits are set.
This patch is originally from Guenter [1] and includes the fixup
explained in the thread, that is printing permissions in octal format
and limiting the scope of attributes to SYSFS_PREALLOC | 0664.
[1] https://lkml.org/lkml/2015/1/19/599
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Up to now, is_visible can only be used to either remove visibility
of a file entirely or to add permissions, but not to reduce permissions.
This makes it impossible, for example, to use DEVICE_ATTR_RW to define
file attributes and reduce permissions to read-only.
This behavior is undesirable and unnecessarily complicates code which
needs to reduce permissions; instead of just returning the desired
permissions, it has to ensure that the permissions in the attribute
variable declaration only reflect the minimal permissions ever needed.
Change semantics of is_visible to only use the permissions returned
from it instead of oring the returned value with the hard-coded
permissions.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Really tiny set of patches for this kernel. Nothing major, all
described in the shortlog and have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlTgtIAACgkQMUfUDdst+ymjSwCfWspNT71lmsVwasCTPQopgXov
TqAAoKR4I5ZebMks/nW6ClxUFYwVSL02
=leVc
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core patches from Greg KH:
"Really tiny set of patches for this kernel. Nothing major, all
described in the shortlog and have been in linux-next for a while"
* tag 'driver-core-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: fix warning when creating a sysfs group without attributes
firmware_loader: handle timeout via wait_for_completion_interruptible_timeout()
firmware_loader: abort request if wait_for_completion is interrupted
firmware: Correct function name in comment
device: Change dev_<level> logging functions to return void
device: Fix dev_dbg_once macro
When a new kernfs node is created, KERNFS_STATIC_NAME is used to avoid
making a separate copy of its name. It's currently only used for sysfs
attributes whose filenames are required to stay accessible and unchanged.
There are rare exceptions where these names are allocated and formatted
dynamically but for the vast majority of cases they're consts in the
rodata section.
Now that kernfs is converted to use kstrdup_const() and kfree_const(),
there's little point in keeping KERNFS_STATIC_NAME around. Remove it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When attempting to create a gropu without attrs, the warning prints the
name of the group. However, the check for name being a NULL pointer is
wrong: it uses the pointer to the name when it's NULL. Fix it to use
the name if present, otherwise just put an empty string.
Cc: Bruno Prémont <bonbons@linux-vserver.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To match the previous patch which used the pre-alloc buffer for
writes, this patch causes reads to use the same buffer.
This is not strictly necessary as the current seq_read() will allocate
on first read, so user-space can trigger the required pre-alloc. But
consistency is valuable.
The read function is somewhat simpler than seq_read() and, for example,
does not support reading from an offset into the file: reads must be
at the start of the file.
As seq_read() does not use the prealloc buffer, ->seq_show is
incompatible with ->prealloc and caused an EINVAL return from open().
sysfs code which calls into kernfs always chooses the correct function.
As the buffer is shared with writes and other reads, the mutex is
extended to cover the copy_to_user.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
md/raid allows metadata management to be performed in user-space.
A various times, particularly on device failure, the metadata needs
to be updated before further writes can be permitted.
This means that the user-space program which updates metadata much
not block on writeout, and so must not allocate memory.
mlockall(MCL_CURRENT|MCL_FUTURE) and pre-allocation can avoid all
memory allocation issues for user-memory, but that does not help
kernel memory.
Several kernel objects can be pre-allocated. e.g. files opened before
any writes to the array are permitted.
However some kernel allocation happens in places that cannot be
pre-allocated.
In particular, writes to sysfs files (to tell md that it can now
allow writes to the array) allocate a buffer using GFP_KERNEL.
This patch allows attributes to be marked as "PREALLOC". In that case
the maximal buffer is allocated when the file is opened, and then used
on each write instead of allocating a new buffer.
As the same buffer is now shared for all writes on the same file
description, the mutex is extended to cover full use of the buffer
including the copy_from_user().
The new __ATTR_PREALLOC() 'or's a new flag in to the 'mode', which is
inspected by sysfs_add_file_mode_ns() to determine if the file should be
marked as requiring prealloc.
Despite the comment, we *do* use ->seq_show together with ->prealloc
in this patch. The next patch fixes that.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the user expectations common utilities like dd or sh
redirection operator > should work correctly over binary files from
sysfs. At the moment doing excessive write can not be completed:
write(1, "\0\0\0\0\0\0\0\0", 8) = 4
write(1, "\0\0\0\0", 4) = 0
write(1, "\0\0\0\0", 4) = 0
write(1, "\0\0\0\0", 4) = 0
...
Fix the problem by returning EFBIG described in man 2 write.
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is still one residue of sysfs remaining: the sb_magic
SYSFS_MAGIC. However this should be kernfs user specific,
so this patch moves it out. Kerrnfs user should specify their
magic number while mouting.
Signed-off-by: Jianyu Zhan <nasa4836@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cody Schafer already fixed binary file creation for attribute groups, see [1].
This patch makes the appropriate changes for binary file removal
of attribute groups.
[1]: http://lkml.org/lkml/2014/2/27/832
Signed-off-by: Robert ABEL <rabel@cit-ec.uni-bielefeld.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
13c589d5b0 ("sysfs: use seq_file when reading regular files")
switched sysfs from custom read implementation to seq_file to enable
later transition to kernfs. After the change, the buffer passed to
->show() is acquired through seq_get_buf(); unfortunately, this
introduces a subtle behavior change. Before the commit, the buffer
passed to ->show() was always zero as it was allocated using
get_zeroed_page(). Because seq_file doesn't clear buffers on
allocation and neither does seq_get_buf(), after the commit, depending
on the behavior of ->show(), we may end up exposing uninitialized data
to userland thus possibly altering userland visible behavior and
leaking information.
Fix it by explicitly clearing the buffer.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ron <ron@debian.org>
Fixes: 13c589d5b0 ("sysfs: use seq_file when reading regular files")
Cc: stable <stable@vger.kernel.org> # 3.13+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernfs open method - kernfs_fop_open() - inherited extra
permission checks from sysfs. While the vfs layer allows ignoring the
read/write permissions checks if the issuer has CAP_DAC_OVERRIDE,
sysfs explicitly denied open regardless of the cap if the file doesn't
have any of the UGO perms of the requested access or doesn't implement
the requested operation. It can be debated whether this was a good
idea or not but the behavior is too subtle and dangerous to change at
this point.
After cgroup got converted to kernfs, this extra perm check also got
applied to cgroup breaking libcgroup which opens write-only files with
O_RDWR as root. This patch gates the extra open permission check with
a new flag KERNFS_ROOT_EXTRA_OPEN_PERM_CHECK and enables it for sysfs.
For sysfs, nothing changes. For cgroup, root now can perform any
operation regardless of the permissions as it was before kernfs
conversion. Note that kernfs still fails unimplemented operations
with -EINVAL.
While at it, add comments explaining KERNFS_ROOT flags.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andrey Wagin <avagin@gmail.com>
Tested-by: Andrey Wagin <avagin@gmail.com>
Cc: Li Zefan <lizefan@huawei.com>
References: http://lkml.kernel.org/g/CANaxB-xUm3rJ-Cbp72q-rQJO5mZe1qK6qXsQM=vh0U8upJ44+A@mail.gmail.com
Fixes: 2bd59d48eb ("cgroup: convert to kernfs")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All device_schedule_callback_owner() users are converted to use
device_remove_file_self(). Remove now unused
{sysfs|device}_schedule_callback_owner().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit d1ba277e79.
As reported by Stephen, this patch breaks linux-next as a ppc patch
suddenly (after 2 years) started using this old api call. So revert it
for now, it will go away in 3.15-rc2 when we can change the PPC call to
the new api.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As mount() and kill_sb() is not a one-to-one match, we shoudn't get
ns refcnt unconditionally in sysfs_mount(), and instead we should
get the refcnt only when kernfs_mount() allocated a new superblock.
v2:
- Changed the name of the new argument, suggested by Tejun.
- Made the argument optional, suggested by Tejun.
v3:
- Make the new argument as second-to-last arg, suggested by Tejun.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
---
fs/kernfs/mount.c | 8 +++++++-
fs/sysfs/mount.c | 5 +++--
include/linux/kernfs.h | 9 +++++----
3 files changed, 15 insertions(+), 7 deletions(-)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bin_attributes created/updated in create_files() (such as those listed
via (struct device).attribute_groups) were not placed under the
specified group, and instead appeared in the base kobj directory.
Fix this by making bin_attributes use creating code similar to normal
attributes.
A quick grep shows that no one is using bin_attrs in a named attribute
group yet, so we can do this without breaking anything in usespace.
Note that I do not add is_visible() support to
bin_attributes, though that could be done as well.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As sysfs was kernfs's only user, kernfs has been piggybacking on
CONFIG_SYSFS; however, kernfs is scheduled to grow a new user very
soon. Introduce a separate config option CONFIG_KERNFS which is to be
selected by kernfs users.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_node->parent and ->name are currently marked as "published"
indicating that kernfs users may access them directly; however, those
fields may get updated by kernfs_rename[_ns]() and unrestricted access
may lead to erroneous values or oops.
Protect ->parent and ->name updates with a irq-safe spinlock
kernfs_rename_lock and implement the following accessors for these
fields.
* kernfs_name() - format the node's name into the specified buffer
* kernfs_path() - format the node's path into the specified buffer
* pr_cont_kernfs_name() - pr_cont a node's name (doesn't need buffer)
* pr_cont_kernfs_path() - pr_cont a node's path (doesn't need buffer)
* kernfs_get_parent() - pin and return a node's parent
All can be called under any context. The recursive sysfs_pathname()
in fs/sysfs/dir.c is replaced with kernfs_path() and
sysfs_rename_dir_ns() is updated to use kernfs_get_parent() instead of
dereferencing parent directly.
v2: Dummy definition of kernfs_path() for !CONFIG_KERNFS was missing
static inline making it cause a lot of build warnings. Add it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, kernfs_nodes are made visible to userland on creation,
which makes it difficult for kernfs users to atomically succeed or
fail creation of multiple nodes. In addition, if something fails
after creating some nodes, the created nodes might already be in use
and their active refs need to be drained for removal, which has the
potential to introduce tricky reverse locking dependency on active_ref
depending on how the error path is synchronized.
This patch introduces per-root flag KERNFS_ROOT_CREATE_DEACTIVATED.
If set, all nodes under the root are created in the deactivated state
and stay invisible to userland until explicitly enabled by the new
kernfs_activate() API. Also, nodes which have never been activated
are guaranteed to bypass draining on removal thus allowing error paths
to not worry about lockding dependency on active_ref draining.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All device_schedule_callback_owner() users are converted to use
device_remove_file_self(). Remove now unused
{sysfs|device}_schedule_callback_owner().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes it's necessary to implement a node which wants to delete
nodes including itself. This isn't straightforward because of kernfs
active reference. While a file operation is in progress, an active
reference is held and kernfs_remove() waits for all such references to
drain before completing. For a self-deleting node, this is a deadlock
as kernfs_remove() ends up waiting for an active reference that itself
is sitting on top of.
This currently is worked around in the sysfs layer using
sysfs_schedule_callback() which makes such removals asynchronous.
While it works, it's rather cumbersome and inherently breaks
synchronicity of the operation - the file operation which triggered
the operation may complete before the removal is finished (or even
started) and the removal may fail asynchronously. If a removal
operation is immmediately followed by another operation which expects
the specific name to be available (e.g. removal followed by rename
onto the same name), there's no way to make the latter operation
reliable.
The thing is there's no inherent reason for this to be asynchrnous.
All that's necessary to do this synchronous is a dedicated operation
which drops its own active ref and deactivates self. This patch
implements kernfs_remove_self() and its wrappers in sysfs and driver
core. kernfs_remove_self() is to be called from one of the file
operations, drops the active ref the task is holding, removes the self
node, and restores active ref to the dead node so that the ref is
balanced afterwards. __kernfs_remove() is updated so that it takes an
early exit if the target node is already fully removed so that the
active ref restored by kernfs_remove_self() after removal doesn't
confuse the deactivation path.
This makes implementing self-deleting nodes very easy. The normal
removal path doesn't even need to be changed to use
kernfs_remove_self() for the self-deleting node. The method can
invoke kernfs_remove_self() on itself before proceeding the normal
removal path. kernfs_remove() invoked on the node by the normal
deletion path will simply be ignored.
This will replace sysfs_schedule_callback(). A subtle feature of
sysfs_schedule_callback() is that it collapses multiple invocations -
even if multiple removals are triggered, the removal callback is run
only once. An equivalent effect can be achieved by testing the return
value of kernfs_remove_self() - only the one which gets %true return
value should proceed with actual deletion. All other instances of
kernfs_remove_self() will wait till the enclosing kernfs operation
which invoked the winning instance of kernfs_remove_self() finishes
and then return %false. This trivially makes all users of
kernfs_remove_self() automatically show correct synchronous behavior
even when there are multiple concurrent operations - all "echo 1 >
delete" instances will finish only after the whole operation is
completed by one of the instances.
Note that manipulation of active ref is implemented in separate public
functions - kernfs_[un]break_active_protection().
kernfs_remove_self() is the only user at the moment but this will be
used to cater to more complex cases.
v2: For !CONFIG_SYSFS, dummy version kernfs_remove_self() was missing
and sysfs_remove_file_self() had incorrect return type. Fix it.
Reported by kbuild test bot.
v3: kernfs_[un]break_active_protection() separated out from
kernfs_remove_self() and exposed as public API.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 1ae06819c7.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit d1ba277e79.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All device_schedule_callback_owner() users are converted to use
device_remove_file_self(). Remove now unused
{sysfs|device}_schedule_callback_owner().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes it's necessary to implement a node which wants to delete
nodes including itself. This isn't straightforward because of kernfs
active reference. While a file operation is in progress, an active
reference is held and kernfs_remove() waits for all such references to
drain before completing. For a self-deleting node, this is a deadlock
as kernfs_remove() ends up waiting for an active reference that itself
is sitting on top of.
This currently is worked around in the sysfs layer using
sysfs_schedule_callback() which makes such removals asynchronous.
While it works, it's rather cumbersome and inherently breaks
synchronicity of the operation - the file operation which triggered
the operation may complete before the removal is finished (or even
started) and the removal may fail asynchronously. If a removal
operation is immmediately followed by another operation which expects
the specific name to be available (e.g. removal followed by rename
onto the same name), there's no way to make the latter operation
reliable.
The thing is there's no inherent reason for this to be asynchrnous.
All that's necessary to do this synchronous is a dedicated operation
which drops its own active ref and deactivates self. This patch
implements kernfs_remove_self() and its wrappers in sysfs and driver
core. kernfs_remove_self() is to be called from one of the file
operations, drops the active ref and deactivates using
__kernfs_deactivate_self(), removes the self node, and restores active
ref to the dead node using __kernfs_reactivate_self() so that the ref
is balanced afterwards. __kernfs_remove() is updated so that it takes
an early exit if the target node is already fully removed so that the
active ref restored by kernfs_remove_self() after removal doesn't
confuse the deactivation path.
This makes implementing self-deleting nodes very easy. The normal
removal path doesn't even need to be changed to use
kernfs_remove_self() for the self-deleting node. The method can
invoke kernfs_remove_self() on itself before proceeding the normal
removal path. kernfs_remove() invoked on the node by the normal
deletion path will simply be ignored.
This will replace sysfs_schedule_callback(). A subtle feature of
sysfs_schedule_callback() is that it collapses multiple invocations -
even if multiple removals are triggered, the removal callback is run
only once. An equivalent effect can be achieved by testing the return
value of kernfs_remove_self() - only the one which gets %true return
value should proceed with actual deletion. All other instances of
kernfs_remove_self() will wait till the enclosing kernfs operation
which invoked the winning instance of kernfs_remove_self() finishes
and then return %false. This trivially makes all users of
kernfs_remove_self() automatically show correct synchronous behavior
even when there are multiple concurrent operations - all "echo 1 >
delete" instances will finish only after the whole operation is
completed by one of the instances.
v2: For !CONFIG_SYSFS, dummy version kernfs_remove_self() was missing
and sysfs_remove_file_self() had incorrect return type. Fix it.
Reported by kbuild test bot.
v3: Updated to use __kernfs_{de|re}activate_self().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for mkdir(2), rmdir(2) and rename(2) syscalls. This is
implemented through optional kernfs_dir_ops callback table which can
be specified on kernfs_create_root(). An implemented callback is
invoked when the matching syscall is invoked.
As kernfs keep dcache syncs with internal representation and
revalidates dentries on each access, the implementation of these
methods is extremely simple. Each just discovers the relevant
kernfs_node(s) and invokes the requested callback which is allowed to
do any kernfs operations and the end result doesn't necessarily have
to match the expected semantics of the syscall.
This will be used to convert cgroup to use kernfs instead of its own
filesystem implementation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because sysfs used struct attribute which are supposed to stay
constant, sysfs didn't copy names when creating regular files. The
specified string for name was supposed to stay constant. Such
distinction isn't inherent for kernfs. kernfs_create_file[_ns]()
should be able to take the same @name as kernfs_create_dir[_ns]()
As there can be huge number of sysfs attributes, we still want to be
able to use static names for sysfs attributes. This patch renames
kernfs_create_file_ns_key() to __kernfs_create_file() and adds
@name_is_static parameter so that the caller can explicitly indicate
that @name can be used without copying. kernfs is updated to use
KERNFS_STATIC_NAME to distinguish static and copied names.
This patch doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs assumed 0755 for all newly created directories and kernfs
inherited it. This assumption is unnecessarily restrictive and
inconsistent with kernfs_create_file[_ns](). This patch adds @mode
parameter to kernfs_create_dir[_ns]() and update uses in sysfs
accordingly. Among others, this will be useful for implementations of
the planned ->mkdir() method.
This patch doesn't introduce any behavior differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.
This patch performs the following renames.
* s/SYSFS_DIR/KERNFS_DIR/
* s/SYSFS_KOBJ_ATTR/KERNFS_FILE/
* s/SYSFS_KOBJ_LINK/KERNFS_LINK/
* s/SYSFS_{TYPE_FLAGS}/KERNFS_{TYPE_FLAGS}/
* s/SYSFS_FLAG_{FLAG}/KERNFS_{FLAG}/
* s/sysfs_type()/kernfs_type()/
* s/SD_DEACTIVATED_BIAS/KN_DEACTIVATED_BIAS/
This patch is strictly rename only and doesn't introduce any
functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.
This patch performs the following renames.
* s/sysfs_open_dirent/kernfs_open_node/
* s/sysfs_open_file/kernfs_open_file/
* s/sysfs_inode_attrs/kernfs_iattrs/
* s/sysfs_addrm_cxt/kernfs_addrm_cxt/
* s/sysfs_super_info/kernfs_super_info/
* s/sysfs_info()/kernfs_info()/
* s/sysfs_open_dirent_lock/kernfs_open_node_lock/
* s/sysfs_open_file_mutex/kernfs_open_file_mutex/
* s/sysfs_of()/kernfs_of()/
This patch is strictly rename only and doesn't introduce any
functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.
s_ prefix for kernfs members is used inconsistently and a misnomer
now. It's not like kernfs_node is used widely across the kernel
making the ability to grep for the members particularly useful. Let's
just drop the prefix.
This patch is strictly rename only and doesn't introduce any
functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.
This patch performs the following renames.
* s/sysfs_elem_dir/kernfs_elem_dir/
* s/sysfs_elem_symlink/kernfs_elem_symlink/
* s/sysfs_elem_attr/kernfs_elem_file/
* s/sysfs_dirent/kernfs_node/
* s/sd/kn/ in kernfs proper
* s/parent_sd/parent/
* s/target_sd/target/
* s/dir_sd/parent/
* s/to_sysfs_dirent()/rb_to_kn()/
* misc renames of local vars when they conflict with the above
Because md, mic and gpio dig into sysfs details, this patch ends up
modifying them. All are sysfs_dirent renames and trivial. While we
can avoid these by introducing a dummy wrapping struct sysfs_dirent
around kernfs_node, given the limited usage outside kernfs and sysfs
proper, I don't think such workaround is called for.
This patch is strictly rename only and doesn't introduce any
functional difference.
- mic / gpio renames were missing. Spotted by kbuild test robot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While restructuring the [u]mount path, 4b93dc9b1c ("sysfs, kernfs:
prepare mount path for kernfs") incorrectly updated sysfs_kill_sb() so
that it first kills super_block and then tries to dereference its
namespace tag to drop it. Fix it by caching namespace tag before
killing the superblock and then drop the cached namespace tag.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/g/20131205031051.GC5135@yliu-dev.sh.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is v3.14 fix for the same issue that a8b1474442 ("sysfs: give
different locking key to regular and bin files") addresses for v3.13.
Due to the extensive kernfs reorganization in v3.14 branch, the same
fix couldn't be ported as-is. The v3.13 fix was ignored while merging
it into v3.14 branch.
027a485d12 ("sysfs: use a separate locking class for open files
depending on mmap") assigned different lockdep key to
sysfs_open_file->mutex depending on whether the file implements mmap
or not in an attempt to avoid spurious lockdep warning caused by
merging of regular and bin file paths.
While this restored some of the original behavior of using different
locks (at least lockdep is concerned) for the different clases of
files. The restoration wasn't full because now the lockdep key
assignment depends on whether the file has mmap or not instead of
whether it's a regular file or not.
This means that bin files which don't implement mmap will get assigned
the same lockdep class as regular files. This is problematic because
file_operations for bin files still implements the mmap file operation
and checking whether the sysfs file actually implements mmap happens
in the file operation after grabbing @sysfs_open_file->mutex. We
still end up adding locking dependency from mmap locking to
sysfs_open_file->mutex to the regular file mutex which triggers
spurious circular locking warning.
For v3.13, a8b1474442 ("sysfs: give different locking key to regular
and bin files") fixed it by giving sysfs_open_file->mutex different
lockdep keys depending on whether the file is regular or bin instead
of whether mmap exists or not; however, due to the way sysfs is now
layered behind kernfs, this approach is no longer viable. kernfs can
tell whether a sysfs node has mmap implemented or not but can't tell
whether a bin file from a regular one.
This patch updates kernfs such that kernfs_file_mmap() checks
SYSFS_FLAG_HAS_MMAP and bail before grabbing sysfs_open_file->mutex so
that it doesn't add spurious locking dependency from mmap to
sysfs_open_file->mutex and changes sysfs so that it specifies
kernfs_ops->mmap iff the sysfs file implements mmap. Combined, this
ensures that sysfs_open_file->mutex is grabbed under mmap path iff the
sysfs file actually implements mmap. As sysfs_open_file->mutex is
already given a different lockdep key if mmap is implemented, this
removes the spurious locking dependency.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dave Jones <davej@redhat.com>
Link: http://lkml.kernel.org/g/20131203184324.GA11320@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fs/kernfs/kernfs-internal.h needed to include fs/sysfs/sysfs.h because
part of kernfs core implementation was living in sysfs.
fs/sysfs/sysfs.h needed to include fs/kernfs/kernfs-internal.h because
include/linux/kernfs.h didn't expose enough interface.
The separation is complete and neither is true anymore. Remove the
cross inclusion and make sysfs a proper user of kernfs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fs/sysfs/symlink.c::sysfs_delete_link() tests @sd->s_flags for
SYSFS_FLAG_NS. Let's add kernfs_ns_enabled() so that sysfs doesn't
have to test sysfs_dirent flag directly. This makes things tidier for
kernfs proper too.
This is purely cosmetic.
v2: To avoid possible NULL deref, use noop dummy implementation which
always returns false when !CONFIG_SYSFS.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move core mount code to fs/kernfs/mount.c. The respective
declarations in fs/sysfs/sysfs.h are moved to
fs/kernfs/kernfs-internal.h.
This is pure relocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We're in the process of separating out core sysfs functionality into
kernfs which will deal with sysfs_dirents directly. This patch
rearranges mount path so that the kernfs and sysfs parts are separate.
* As sysfs_super_info won't be visible outside kernfs proper,
kernfs_super_ns() is added to allow kernfs users to access a
super_block's namespace tag.
* Generic mount operation is separated out into kernfs_mount_ns().
sysfs_mount() now just performs sysfs-specific permission check,
acquires namespace tag, and invokes kernfs_mount_ns().
* Generic superblock release is separated out into kernfs_kill_sb()
which can be used directly as file_system_type->kill_sb(). As sysfs
needs to put the namespace tag, sysfs_kill_sb() wraps
kernfs_kill_sb() with ns tag put.
* sysfs_dir_cachep init and sysfs_inode_init() are separated out into
kernfs_init(). kernfs_init() uses only small amount of memory and
trying to handle and propagate kernfs_init() failure doesn't make
much sense. Use SLAB_PANIC for sysfs_dir_cachep and make
sysfs_inode_init() panic on failure.
After this change, kernfs_init() should be called before
sysfs_init(), fs/namespace.c::mnt_init() modified accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs is being updated to allow multiple sysfs_dirent hierarchies so
that it can also be used by other users. Currently, sysfs
super_blocks are always attached to one kernfs_root - sysfs_root - and
distinguished only by their namespace tags.
This patch adds sysfs_super_info->root and update
sysfs_fill/test_super() so that super_blocks are identified by the
combination of both the associated kernfs_root and namespace tag.
This allows mounting different kernfs hierarchies.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There currently is single kernfs hierarchy in the whole system which
is used for sysfs. kernfs needs to support multiple hierarchies to
allow other users. This patch introduces struct kernfs_root which
serves as the root of each kernfs hierarchy and implements
kernfs_create/destroy_root().
* Each kernfs_root is associated with a root sd (sysfs_dentry). The
root is freed when the root sd is released and kernfs_destory_root()
simply invokes kernfs_remove() on the root sd. sysfs_remove_one()
is updated to handle release of the root sd. Note that ps_iattr
update in sysfs_remove_one() is trivially updated for readability.
* Root sd's are now dynamically allocated using sysfs_new_dirent().
Update sysfs_alloc_ino() so that it gives out ino from 1 so that the
root sd still gets ino 1.
* While kernfs currently only points to the root sd, it'll soon grow
fields which are specific to each hierarchy. As determining a given
sd's root will be necessary, sd->s_dir.root is added. This backlink
fits better as a separate field in sd; however, sd->s_dir is inside
union with space to spare, so use it to save space and provide
kernfs_root() accessor to determine the root sd.
* As hierarchies may be destroyed now, each mount needs to hold onto
the hierarchy it's attached to. Update sysfs_fill_super() and
sysfs_kill_sb() so that they get and put the kernfs_root
respectively.
* sysfs_root is replaced with kernfs_root which is dynamically created
by invoking kernfs_create_root() from sysfs_init().
This patch doesn't introduce any visible behavior changes.
v2: kernfs_create_root() forgot to set @sd->priv. Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, it's assumed that there's a single kernfs hierarchy in the
system anchored at sysfs_root which is defined as a global struct. To
allow other users of kernfs, this will be made dynamic. Introduce a
new global variable sysfs_root_sd which points to &sysfs_root and
convert all &sysfs_root users.
This patch doesn't introduce any behavior difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It has been very long since sysfs depended on vfs to keep track of
internal states and whether sysfs is mounted or not doesn't make any
difference to sysfs's internal operation.
In addition to init and filesystem type registration, sysfs_init()
invokes kern_mount() to create in-kernel mount of sysfs. This
internal mounting doesn't server any purpose anymore. Remove it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add const qualifier to sysfs_super_info->ns so that it's consistent
with other namespace tag usages in sysfs. Because kobject doesn't use
const qualifier for namespace tags, this ends up requiring an explicit
cast to drop const qualifier in free_sysfs_super_info().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs_fill_super() takes three params - @sb, @data and @silent - but
uses only @sb. Drop the latter two.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move core symlink code to fs/kernfs/symlink.c. fs/sysfs/symlink.c now
only contains sysfs wrappers around kernfs interfaces. The respective
declarations in fs/sysfs/sysfs.h are moved to
fs/kernfs/kernfs-internal.h.
This is pure relocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move core file code to fs/kernfs/file.c. fs/sysfs/file.c now contains
sysfs kernfs_ops callbacks, sysfs wrappers around kernfs interfaces,
and sysfs_schedule_callback(). The respective declarations in
fs/sysfs/sysfs.h are moved to fs/kernfs/kernfs-internal.h.
This is pure relocation.
v2: Refreshed on top of the v2 of "sysfs, kernfs: prepare read path
for kernfs".
v3: Refreshed on top of the v3 of "sysfs, kernfs: prepare read path
for kernfs".
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move core dir code to fs/kernfs/dir.c. fs/sysfs/dir.c now only
contains sysfs_warn_dup() and sysfs wrappers around kernfs interfaces.
The respective declarations in fs/sysfs/sysfs.h are moved to
fs/kernfs/kernfs-internal.h.
This is pure relocation.
v2: sysfs_symlink_target_lock was mistakenly relocated to kernfs. It
should remain with sysfs. Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's nothing sysfs-specific in fs/sysfs/inode.c. Move everything
in it to fs/kernfs/inode.c. The respective declarations in
fs/sysfs/sysfs.h are moved to fs/kernfs/kernfs-internal.h.
This is pure relocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move data structure, constant and basic accessor declarations from
fs/sysfs/sysfs.h to fs/kernfs/kernfs-internal.h. The two files
currently include each other. Once kernfs / sysfs separation is
complete, the cross inclusions will be removed. Inclusion protectors
are added to fs/sysfs/sysfs.h to allow cross-inclusion.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce kernfs interface for finding, getting and putting
sysfs_dirents.
* sysfs_find_dirent() is renamed to kernfs_find_ns() and lockdep
assertion for sysfs_mutex is added.
* sysfs_get_dirent_ns() is renamed to kernfs_find_and_get().
* Macro inline dancing around __sysfs_get/put() are removed and
kernfs_get/put() are made proper functions implemented in
fs/sysfs/dir.c.
While the conversions are mostly equivalent, there's one difference -
kernfs_get() doesn't return the input param as its return value. This
change is intentional. While passing through the input increases
writability in some areas, it is unnecessary and has been shown to
cause confusion regarding how the last ref is handled.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, sysfs_dirent active_ref lockdep annotation uses
attribute->[s]key as the lockdep key, which forces
kernfs_create_file_ns() to assume that sysfs_dirent->priv is pointing
to a struct attribute which may not be true for non-sysfs users. This
patch restructures the lockdep annotation such that
* kernfs_ops contains lockdep_key which is used by default for files
created kernfs_create_file_ns().
* kernfs_create_file_ns_key() is introduced which takes an extra @key
argument. The created file will use the specified key for
active_ref lockdep annotation. If NULL is specified, lockdep for
the file is disabled.
* sysfs_add_file_mode_ns() is updated to use
kernfs_create_file_ns_key() with the appropriate key from the
attribute or NULL if ignore_lockdep is set.
This makes the lockdep annotation properly contained in kernfs while
allowing sysfs to cleanly keep its current behavior. This patch
doesn't introduce any behavior differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We want to add one more SYSFS_FLAG_* but we can't use the next higher
bit, 0x10000, as the flag field is 16bits wide. The flags are
currently arranged weirdly - 8 bits are set aside for the type flags
when there are only three three used, the first flag starts at 0x1000
instead of 0x0100 and flag literals have 5 digits (20 bits) when only
4 digits can be used.
Rearrange them so that type bits are only the lowest four, flags start
at 0x0010 and similar flags are grouped.
This patch doesn't cause any behavior difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce kernfs interface to wake up poll(2) which takes and returns
sysfs_dirents.
sysfs_notify_dirent() is renamed to kernfs_notify() and sysfs_notify()
is updated so that it doesn't directly grab sysfs_mutex but acquires
the target sysfs_dirents using sysfs_get_dirent().
sysfs_notify_dirent() is reimplemented as a dumb inline wrapper around
kernfs_notify().
This patch doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_ops currently only supports single_open() behavior which is
pretty restrictive. Add optional callbacks ->seq_{start|next|stop}()
which, when implemented, are invoked for seq_file traversal. This
allows full seq_file functionality for kernfs users. This currently
doesn't have any user and doesn't change any behavior.
v2: Refreshed on top of the updated "sysfs, kernfs: prepare read path
for kernfs".
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs_add_one() is a wrapper around __sysfs_add_one() which prints out
duplicate name warning if __sysfs_add_one() fails with -EEXIST. The
previous kernfs conversions moved all dup warnings to sysfs interface
functions and sysfs_add_one() doesn't have any user left.
Remove sysfs_add_one() and update __sysfs_add_one() to take its name.
This patch doesn't make any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce kernfs interface to create a file which takes and returns
sysfs_dirents.
The actual file creation part is separated out from
sysfs_add_file_mode_ns() into kernfs_create_file_ns(). The former now
only decides the kernfs_ops to use and the file's size and invokes the
latter.
This patch doesn't introduce behavior changes.
v2: Dummy implementation for !CONFIG_SYSFS updated to return -ENOSYS.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After kernfs_ops and sysfs_dirent->s_attr.size addition, the
distinction between SYSFS_KOBJ_BIN_ATTR and SYSFS_KOBJ_ATTR is only
necessary while creating files to decide which kernfs_ops to use.
Afterwards, they behave exactly the same.
This patch removes SYSFS_KOBJ_BIN_ATTR along with sysfs_is_bin().
sysfs_add_file[_mode_ns]() are updated to take bool @is_bin instead of
@type.
This patch doesn't introduce any behavior changes. This completely
isolates the distinction between the two sysfs file types in the sysfs
layer proper.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs sets the size of regular files unconditionally at PAGE_SIZE and
takes the size of bin files from bin_attribute. The latter is a
pretty bad interface which forces bin_attribute users to create a
separate copy of bin_attribute for each instance of the file -
e.g. pci resource files.
Add sysfs_dirent->s_attr.size so that the size can be specified
separately. This unifies inode init paths of ATTR and BIN_ATTR
identical and allows for generic size handling for kernfs.
Unfortunately, this grows the size of sysfs_dirent by sizeof(loff_t).
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We're in the process of separating out core sysfs functionality into
kernfs which will deal with sysfs_dirents directly. This patch
introduces kernfs_ops which hosts methods kernfs users implement and
updates fs/sysfs/file.c such that sysfs_kf_*() functions populate
kernfs_ops and kernfs_file_*() functions call the matching entries
from kernfs_ops.
kernfs_ops contains the following groups of methods.
* seq_show() - for kernfs files which use seq_file for reads.
* read() - for direct read implementations. Used iff seq_show() is
not implemented.
* write() - for writes.
* mmap() - for mmaps.
Notes:
* sysfs_elem_attr->ops is added so that kernfs_ops can be accessed
from sysfs_dirent. kernfs_ops() helper is added to verify locking
and access the field.
* SYSFS_FLAG_HAS_(SEQ_SHOW|MMAP) added. sd->s_attr->ops is accessible
only while holding active_ref and there are cases where we want to
take different actions depending on which ops are implemented.
These two flags cache whether the two ops are implemented for those.
* kernfs_file_*() no longer test sysfs type but chooses different
behaviors depending on which methods in kernfs_ops are implemented.
The conversions are trivial except for the open path. As
kernfs_file_open() now decides whether to allow read/write accesses
depending on the kernfs_ops implemented, the presence of methods in
kobjs and attribute_bin should be propagated to kernfs_ops.
sysfs_add_file_mode_ns() is updated so that it propagates presence /
absence of the callbacks through _empty, _ro, _wo, _rw kernfs_ops.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs_open_file will be used as the primary handle for kernfs methods.
Move its definition from fs/sysfs/file.c to include/linux/kernfs.h and
mark the public and private fields.
This is pure relocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We're in the process of separating out core sysfs functionality into
kernfs which will deal with sysfs_dirents directly. This patch
prepares the rest - open, release and poll. There isn't much to do.
Just renaming is enough. As sysfs_file_operations and
sysfs_bin_operations are identical now, use the same file_operations
for both - kernfs_file_operations.
This patch doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We're in the process of separating out core sysfs functionality into
kernfs which will deal with sysfs_dirents directly. This patch
rearranges mmap path so that the kernfs and sysfs parts are separate.
sysfs_kf_bin_mmap() which handles the interaction with bin_attribute
mmap method is factored out of sysfs_bin_mmap(), which is renamed to
kernfs_file_mmap(). All vma ops are renamed accordingly.
sysfs_bin_mmap() is updated such that it can be used for both file
types. This will eventually allow using the same file_operations for
both file types, which is necessary to separate out kernfs.
This patch doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We're in the process of separating out core sysfs functionality into
kernfs which will deal with sysfs_dirents directly. This patch
rearranges write path so that the kernfs and sysfs parts are separate.
kernfs_file_write() handles all boilerplate work including buffer
management and locking and invokes sysfs_kf_write() or
sysfs_kf_bin_write() depending on the file type which deals with the
interaction with kobj store or bin_attribute write method.
While this patch changes the order of some operations, it shouldn't
change any visible behavior.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We're in the process of separating out core sysfs functionality into
kernfs which will deal with sysfs_dirents directly. This patch
rearranges read path so that the kernfs and sysfs parts are separate.
* Regular file read path is refactored such that
kernfs_seq_start/next/stop/show() handle all the boilerplate work
including locking and updating event count for poll, while
sysfs_kf_seq_show() deals with interaction with kobj show method.
* Bin file read path is refactored such that kernfs_file_direct_read()
handles all the boilerplate work including buffer management and
locking, while sysfs_kf_bin_read() deals with interaction with
bin_attribute read method.
kernfs_file_read() is added. It invokes either the seq_file or direct
read path depending on the file type. This will eventually allow
using the same file_operations for both file types, which is necessary
to separate out kernfs.
While this patch changes the order of some operations, it shouldn't
change any visible behavior.
v2: Dropped unnecessary zeroing of @count from sysfs_kf_seq_show().
Add comments explaining single_open() behavior. Both suggested by
Pavel.
v3: seq_stop() is called even after seq_start() failed.
kernfs_seq_start() updated so that it doesn't unlock
sysfs_open_file->mutex on failure so that kernfs_seq_stop()
doesn't try to unlock an already unlocked mutex. Reported by
Fengguang.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce kernfs interface to manipulate a directory which takes and
returns sysfs_dirents.
create_dir() is renamed to kernfs_create_dir_ns() and its argumantes
and return value are updated. create_dir() usages are replaced with
kernfs_create_dir_ns() and sysfs_create_subdir() usages are replaced
with kernfs_create_dir(). Dup warnings are handled explicitly by
sysfs users of the kernfs interface.
sysfs_enable_ns() is renamed to kernfs_enable_ns().
This patch doesn't introduce any behavior changes.
v2: Dummy implementation for !CONFIG_SYSFS updated to return -ENOSYS.
v3: kernfs_enable_ns() added.
v4: Refreshed on top of "sysfs: drop kobj_ns_type handling, take #2"
so that this patch removes sysfs_enable_ns().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A directory sysfs_dirent points to the associated kobj. A regular or
bin file points to the associated [bin_]attribute. This patch
replaces sysfs_dirent->s_dir.kobj and ->s_attr.[bin_]attr with void *
->priv.
This is to prepare for kernfs interface so that sysfs can specify the
private data in the same way for directories and files. This lower
debuggability but not by much - the whole thing was overlaid in a
union anyway. If debuggability becomes an issue, we can later add
->priv accessors which explicitly check for the sysfs_dirent type and
performs casting.
This patch doesn't introduce any behavior difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need those sysfs fixes in this branch to make testing, and future
patches apply properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce kernfs setattr interface - kernfs_setattr().
sysfs_sd_setattr() is renamed to __kernfs_setattr() and
kernfs_setattr() is a simple wrapper around it with sysfs_mutex
locking. sysfs_chmod_file() is updated to get an explicit ref on
kobj->sd and then invoke kernfs_setattr() so that it doesn't have to
use internal interface.
This patch doesn't introduce any behavior differences.
v2: Dummy implementation for !CONFIG_SYSFS updated to return -ENOSYS.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce kernfs rename interface, krenfs_rename[_ns]().
This is just rename of sysfs_rename(). No functional changes.
Function comment is added to kernfs_rename_ns() and @new_parent_sd is
renamed to @new_parent for consistency with other kernfs interfaces.
v2: Dummy implementation for !CONFIG_SYSFS updated to return -ENOSYS.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Separate out kernfs symlink interface - kernfs_create_link() - which
takes and returns sysfs_dirents, from sysfs_do_create_link_sd().
sysfs_do_create_link_sd() now just determines the parent and target
sysfs_dirents and invokes the new interface and handles dup warning.
This patch doesn't introduce behavior changes.
v2: Dummy implementation for !CONFIG_SYSFS updated to return -ENOSYS.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce kernfs removal interfaces - kernfs_remove() and
kernfs_remove_by_name[_ns]().
These are just renames of sysfs_remove() and sysfs_hash_and_remove().
No functional changes.
v2: Dummy kernfs_remove_by_name_ns() for !CONFIG_SYSFS updated to
return -ENOSYS instead of 0.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the kobject based interface guarantees that a parent
sysfs_dirent is always a directory; however, the planned kernfs
interface will be directly based on sysfs_dirents and the caller may
specify non-directory node as the parent. Add an explicit check in
__sysfs_add_one() so that such attempts fail with -EINVAL.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The way namespace tags are implemented in sysfs is more complicated
than necessary. As each tag is a pointer value and required to be
non-NULL under a namespace enabled parent, there's no need to record
separately what type each tag is. If multiple namespace types are
needed, which currently aren't, we can simply compare the tag to a set
of allowed tags in the superblock assuming that the tags, being
pointers, won't have the same value across multiple types.
This patch rips out kobj_ns_type handling from sysfs. sysfs now has
an enable switch to turn on namespace under a node. If enabled, all
children are required to have non-NULL namespace tags and filtered
against the super_block's tag.
kobject namespace determination is now performed in
lib/kobject.c::create_dir() making sysfs_read_ns_type() unnecessary.
The sanity checks are also moved. create_dir() is restructured to
ease such addition. This removes most kobject namespace knowledge
from sysfs proper which will enable proper separation and layering of
sysfs.
This is the second try. The first one was cb26a31157 ("sysfs: drop
kobj_ns_type handling") which tried to automatically enable namespace
if there are children with non-NULL namespace tags; however, it was
broken for symlinks as they should inherit the target's tag iff
namespace is enabled in the parent. This led to namespace filtering
enabled incorrectly for wireless net class devices through phy80211
symlinks and thus network configuration failure. a1212d278c
("Revert "sysfs: drop kobj_ns_type handling"") reverted the commit.
This shouldn't introduce any behavior changes, for real.
v2: Dummy implementation of sysfs_enable_ns() for !CONFIG_SYSFS was
missing and caused build failure. Reported by kbuild test robot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 54d71145a4.
The root cause of these "inverted" sysfs removals have now been found,
so there is no need for this patch. Keep this functionality around so
that this type of error doesn't show up in driver code again.
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following two commits implemented mmap support in the regular file
path and merged bin file support into the regular path.
73d9714627 ("sysfs: copy bin mmap support from fs/sysfs/bin.c to fs/sysfs/file.c")
3124eb1679 ("sysfs: merge regular and bin file handling")
After the merge, the following commands trigger a spurious lockdep
warning. "test-mmap-read" simply mmaps the file and dumps the
content.
$ cat /sys/block/sda/trace/act_mask
$ test-mmap-read /sys/devices/pci0000\:00/0000\:00\:03.0/resource0 4096
======================================================
[ INFO: possible circular locking dependency detected ]
3.12.0-work+ #378 Not tainted
-------------------------------------------------------
test-mmap-read/567 is trying to acquire lock:
(&of->mutex){+.+.+.}, at: [<ffffffff8120a8df>] sysfs_bin_mmap+0x4f/0x120
but task is already holding lock:
(&mm->mmap_sem){++++++}, at: [<ffffffff8114b399>] vm_mmap_pgoff+0x49/0xa0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&mm->mmap_sem){++++++}:
...
-> #2 (sr_mutex){+.+.+.}:
...
-> #1 (&bdev->bd_mutex){+.+.+.}:
...
-> #0 (&of->mutex){+.+.+.}:
...
other info that might help us debug this:
Chain exists of:
&of->mutex --> sr_mutex --> &mm->mmap_sem
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mm->mmap_sem);
lock(sr_mutex);
lock(&mm->mmap_sem);
lock(&of->mutex);
*** DEADLOCK ***
1 lock held by test-mmap-read/567:
#0: (&mm->mmap_sem){++++++}, at: [<ffffffff8114b399>] vm_mmap_pgoff+0x49/0xa0
stack backtrace:
CPU: 3 PID: 567 Comm: test-mmap-read Not tainted 3.12.0-work+ #378
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
ffffffff81ed41a0 ffff880009441bc8 ffffffff81611ad2 ffffffff81eccb80
ffff880009441c08 ffffffff8160f215 ffff880009441c60 ffff880009c75208
0000000000000000 ffff880009c751e0 ffff880009c75208 ffff880009c74ac0
Call Trace:
[<ffffffff81611ad2>] dump_stack+0x4e/0x7a
[<ffffffff8160f215>] print_circular_bug+0x2b0/0x2bf
[<ffffffff8109ca0a>] __lock_acquire+0x1a3a/0x1e60
[<ffffffff8109d6ba>] lock_acquire+0x9a/0x1d0
[<ffffffff81615547>] mutex_lock_nested+0x67/0x3f0
[<ffffffff8120a8df>] sysfs_bin_mmap+0x4f/0x120
[<ffffffff8115d363>] mmap_region+0x3b3/0x5b0
[<ffffffff8115d8ae>] do_mmap_pgoff+0x34e/0x3d0
[<ffffffff8114b3ba>] vm_mmap_pgoff+0x6a/0xa0
[<ffffffff8115be3e>] SyS_mmap_pgoff+0xbe/0x250
[<ffffffff81008282>] SyS_mmap+0x22/0x30
[<ffffffff8161a4d2>] system_call_fastpath+0x16/0x1b
This happens because one file nests sr_mutex, which nests mm->mmap_sem
under it, under of->mutex while mmap implementation naturally nests
of->mutex under mm->mmap_sem. The warning is false positive as
of->mutex is per open-file and the two paths belong to two different
files. This warning didn't trigger before regular and bin file
supports were merged because only bin file supported mmap and the
other side of locking happened only on regular files which used
equivalent but separate locking.
It'd be best if we give separate locking classes per file but we can't
easily do that. Let's differentiate on ->mmap() for now. Later we'll
add explicit file operations struct and can add per-ops lockdep key
there.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit bcdde7e221 (sysfs: make __sysfs_remove_dir() recursive) changed
the behavior so that directory removals will be done recursively. This
means that the sysfs group might already be removed if its parent directory
has been removed.
The current code outputs warnings similar to following log snippet when it
detects that there is no group for the given kobject:
WARNING: CPU: 0 PID: 4 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
sysfs group ffffffff81c6f1e0 not found for kobject 'host7'
Modules linked in:
CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 3.12.0+ #13
Hardware name: /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
0000000000000009 ffff8801002459b0 ffffffff817daab1 ffff8801002459f8
ffff8801002459e8 ffffffff810436b8 0000000000000000 ffffffff81c6f1e0
ffff88006d440358 ffff88006d440188 ffff88006e8b4c28 ffff880100245a48
Call Trace:
[<ffffffff817daab1>] dump_stack+0x45/0x56
[<ffffffff810436b8>] warn_slowpath_common+0x78/0xa0
[<ffffffff81043727>] warn_slowpath_fmt+0x47/0x50
[<ffffffff811ad319>] ? sysfs_get_dirent_ns+0x49/0x70
[<ffffffff811ae526>] sysfs_remove_group+0xc6/0xd0
[<ffffffff81432f7e>] dpm_sysfs_remove+0x3e/0x50
[<ffffffff8142a0d0>] device_del+0x40/0x1b0
[<ffffffff8142a24d>] device_unregister+0xd/0x20
[<ffffffff8144131a>] scsi_remove_host+0xba/0x110
[<ffffffff8145f526>] ata_host_detach+0xc6/0x100
[<ffffffff8145f578>] ata_pci_remove_one+0x18/0x20
[<ffffffff812e8f48>] pci_device_remove+0x28/0x60
[<ffffffff8142d854>] __device_release_driver+0x64/0xd0
[<ffffffff8142d8de>] device_release_driver+0x1e/0x30
[<ffffffff8142d257>] bus_remove_device+0xf7/0x140
[<ffffffff8142a1b1>] device_del+0x121/0x1b0
[<ffffffff812e43d4>] pci_stop_bus_device+0x94/0xa0
[<ffffffff812e437b>] pci_stop_bus_device+0x3b/0xa0
[<ffffffff812e437b>] pci_stop_bus_device+0x3b/0xa0
[<ffffffff812e44dd>] pci_stop_and_remove_bus_device+0xd/0x20
[<ffffffff812fc743>] trim_stale_devices+0x73/0xe0
[<ffffffff812fc78b>] trim_stale_devices+0xbb/0xe0
[<ffffffff812fc78b>] trim_stale_devices+0xbb/0xe0
[<ffffffff812fcb6e>] acpiphp_check_bridge+0x7e/0xd0
[<ffffffff812fd90d>] hotplug_event+0xcd/0x160
[<ffffffff812fd9c5>] hotplug_event_work+0x25/0x60
[<ffffffff81316749>] acpi_hotplug_work_fn+0x17/0x22
[<ffffffff8105cf3a>] process_one_work+0x17a/0x430
[<ffffffff8105db29>] worker_thread+0x119/0x390
[<ffffffff8105da10>] ? manage_workers.isra.25+0x2a0/0x2a0
[<ffffffff81063a5d>] kthread+0xcd/0xf0
[<ffffffff81063990>] ? kthread_create_on_node+0x180/0x180
[<ffffffff817eb33c>] ret_from_fork+0x7c/0xb0
[<ffffffff81063990>] ? kthread_create_on_node+0x180/0x180
On this particular machine I see ~16 of these message during Thunderbolt
hot-unplug.
Fix this in similar way that was done for sysfs_remove_one() by checking
if the parent directory has already been removed and bailing out early.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit cb26a31157.
It mysteriously causes NetworkManager to not find the wireless device
for me. As far as I can tell, Tejun *meant* for this commit to not make
any semantic changes, but there clearly are some. So revert it, taking
into account some of the calling convention changes that happened in
this area in subsequent commits.
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sysfs_assoc_lock is an odd piece of locking. In general, whoever owns
a kobject is responsible for synchronizing sysfs operations and sysfs
proper assumes that, for example, removal won't race with any other
operation; however, this doesn't work for symlinking because an entity
performing symlink doesn't usually own the target kobject and thus has
no control over its removal.
sysfs_assoc_lock synchronizes symlink operations against kobj->sd
disassociation so that symlink code doesn't end up dereferencing
already freed sysfs_dirent by racing with removal of the target
kobject.
This is quite obscure and the generic name of the lock and lack of
comments make it difficult to understand its role. Let's rename it to
sysfs_symlink_target_lock and add comments explaining what's going on.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
13c589d5b0 ("sysfs: use seq_file when reading regular files")
converted regular sysfs files to use seq_file. The commit substituted
generic_file_llseek() with seq_lseek() for llseek implementation.
Before the change, all regular sysfs files were allowed to seek to any
position in [0, PAGE_SIZE] as the file size is always PAGE_SIZE and
generic_file_llseek() allows any seeking inside the range under file
size; however, seq_lseek()'s behavior is different. It traverses the
output by repeatedly invoking ->show() until it reaches the target
offset or traversal indicates EOF. As seq_files are fully dynamic and
may not end at all, it doesn't support seeking from the end
(SEEK_END).
Apparently, there are userland tools which uses SEEK_END to discover
the buffer size to use and the switch to seq_lseek() disturbs them as
SEEK_END fails with -EINVAL.
The only benefits of using seq_lseek() instead of
generic_file_llseek() are
* Early failure. If traversing to certain file position should fail,
seq_lseek() will report such failures on lseek(2) instead of the
following read/write operations.
* EOF detection. While SEEK_END is not supported, SEEK_SET/CUR +
large offset can be used to detect eof - eof at the time of the seek
anyway as the file size may change dynamically.
Both aren't necessary for sysfs or prospect kernfs users. Revert to
genefic_file_llseek() and preserve the original behavior.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Link: https://lkml.kernel.org/r/20131031114358.GA5551@osiris
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both POSIX.1-2008 and Linux Programmer's Manual have a dedicated return
error code for a case, when a file doesn't support mmap(), it's ENODEV.
This change replaces overloaded EINVAL with ENODEV in a situation
described above for sysfs binary files.
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Separate out sysfs_warn_dup() out of sysfs_add_one(). This will help
separating out the core sysfs functionalities into kernfs so that it
can be used by non-sysfs users too.
This doesn't make any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most removal related logic is implemented in fs/sysfs/dir.c. Move
sysfs_hash_and_remove() to fs/sysfs/dir.c so that __sysfs_remove()
doesn't have to be public.
This is pure relocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs_get_dentry() has been gone for years now. Remove the left-over
prototype.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ignore_lockdep is currently honored only for regular files. There's
no reason to ignore it for bin files. Update sysfs_ignore_lockdep()
so that bin_attr.attr.ignore_lockdep works too.
While this doesn't have any in-kernel user, this unifies the behaviors
between regular and bin files and will help later changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3124eb1679 ("sysfs: merge regular and bin file handling") folded bin
file handling into regular file handling. Among other things, bin
file now shares the same open path including sysfs_open_dirent
association using sysfs_dirent->s_attr.open. This is buggy because
->s_bin_attr lives in the same union and doesn't have the field. This
bug doesn't trigger because sysfs_elem_bin_attr doesn't have an active
field at the conflicting position. It does have a field "buffers" but
it isn't used anymore.
This patch collapses sysfs_elem_bin_attr into sysfs_elem_attr so that
the bin_attr is accessed through ->s_attr.bin_attr which lives with
->s_attr.attr in an anonymous union. The code paths already assume
bin_attr contains attr as the first element, so this doesn't add any
more assumptions while making it explicit that the two types are
handled together.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before patch(sysfs: prepare path write for unified regular / bin
file handling), when size of bin file is zero, writting still can
continue, but this patch changes the behaviour.
The worse thing is that firmware loader is broken by this patch,
and user space application can't write to firmware bin file any more
because both firmware loader and drivers can't know at advance how
large the firmware file is and have to set its initialized size as
zero.
This patch fixes the problem and keeps behaviour of writting to bin
as before.
Reported-by: Lothar Waßmann <LW@karo-electronics.de>
Tested-by: Lothar Waßmann <LW@karo-electronics.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While looking at the code, I noticed that bin_attribute read() and write()
ops copy the inode size into an int for futher comparisons.
Some bin_attributes can be fairly large. For example, pci creates some for
BARs set to the BAR size and giant BARs are around the corner, so this is
going to break something somewhere eventually.
Let's use the right type.
[adjust for seqfile conversions, only needed for bin_read() - gkh]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
375b611e60 ("sysfs: remove sysfs_buffer->ops") introduced
sysfs_file_ops() which determines the associated file operation of a
given sysfs_dirent. As file ops access should be protected by an
active reference, the new function includes a lockdep assertion on the
sysfs_dirent; unfortunately, I forgot to take attr->ignore_lockdep
flag into account and the lockdep assertion trips spuriously for files
which opt out from active reference lockdep checking.
# cat /sys/devices/pci0000:00/0000:00:01.2/usb1/authorized
------------[ cut here ]------------
WARNING: CPU: 1 PID: 540 at /work/os/work/fs/sysfs/file.c:79 sysfs_file_ops+0x4e/0x60()
Modules linked in:
CPU: 1 PID: 540 Comm: cat Not tainted 3.11.0-work+ #3
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
0000000000000009 ffff880016205c08 ffffffff81ca0131 0000000000000000
ffff880016205c40 ffffffff81096d0d ffff8800166cb898 ffff8800166f6f60
ffffffff8125a220 ffff880011ab1ec0 ffff88000aff0c78 ffff880016205c50
Call Trace:
[<ffffffff81ca0131>] dump_stack+0x4e/0x82
[<ffffffff81096d0d>] warn_slowpath_common+0x7d/0xa0
[<ffffffff81096dea>] warn_slowpath_null+0x1a/0x20
[<ffffffff8125994e>] sysfs_file_ops+0x4e/0x60
[<ffffffff8125a274>] sysfs_open_file+0x54/0x300
[<ffffffff811df612>] do_dentry_open.isra.17+0x182/0x280
[<ffffffff811df820>] finish_open+0x30/0x40
[<ffffffff811f0623>] do_last+0x503/0xd90
[<ffffffff811f0f6b>] path_openat+0xbb/0x6d0
[<ffffffff811f23ba>] do_filp_open+0x3a/0x90
[<ffffffff811e09a9>] do_sys_open+0x129/0x220
[<ffffffff811e0abe>] SyS_open+0x1e/0x20
[<ffffffff81caf3c2>] system_call_fastpath+0x16/0x1b
---[ end trace aa48096b111dafdb ]---
Rename fs/sysfs/dir.c::ignore_lockdep() to sysfs_ignore_lockdep() and
move it to fs/sysfs/sysfs.h and make sysfs_file_ops() skip lockdep
assertion if sysfs_ignore_lockdep() is true.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the previous changes, sysfs regular file code is ready to handle
bin files too. This patch makes bin files share the regular file
path.
* sysfs_create/remove_bin_file() are moved to fs/sysfs/file.c.
* sysfs_init_inode() is updated to use the new sysfs_bin_operations
instead of bin_fops for bin files.
* fs/sysfs/bin.c and the related pieces are removed.
This patch shouldn't introduce any behavior difference to bin file
accesses.
Overall, this unification reduces the amount of duplicate logic, makes
behaviors more consistent and paves the road for building simpler and
more versatile interface which will allow other subsystems to make use
of sysfs for their pseudo filesystems.
v2: Stale fs/sysfs/bin.c reference dropped from
Documentation/DocBook/filesystems.tmpl. Reported by kbuild test
robot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay@vrfy.org>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs bin file handling will be merged into the regular file support.
This patch prepares the open path.
This patch updates sysfs_open_file() such that it can handle both
regular and bin files.
This is a preparation and the new bin file path isn't used yet.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs bin file handling will be merged into the regular file support.
This patch copies mmap support from bin so that fs/sysfs/file.c can
handle mmapping bin files.
The code is copied mostly verbatim with the following updates.
* ->mmapped and ->vm_ops are added to sysfs_open_file and bin_buffer
references are replaced with sysfs_open_file ones.
* Symbols are prefixed with sysfs_.
* sysfs_unmap_bin_file() grabs sysfs_open_dirent and traverses
->files. Invocation of this function is added to
sysfs_addrm_finish().
* sysfs_bin_mmap() is added to sysfs_bin_operations.
This is a preparation and the new mmap path isn't used yet.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs bin file handling will be merged into the regular file support.
This patch prepares the read path.
Copy fs/sysfs/bin.c::read() to fs/sysfs/file.c and make it use
sysfs_open_file instead of bin_buffer. The function is identical copy
except for the use of sysfs_open_file.
The new function is added to sysfs_bin_operations. This isn't used
yet but will eventually replace fs/sysfs/bin.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs bin file handling will be merged into the regular file support.
This patch prepares the write path.
bin file write is almost identical to regular file write except that
the write length is capped by the inode size and @off is passed to the
write method. This patch adds bin file handling to sysfs_write_file()
so that it can handle both regular and bin files.
A new file_operations struct sysfs_bin_operations is added, which
currently only hosts sysfs_write_file() and generic_file_llseek().
This isn't used yet but will eventually replace fs/sysfs/bin.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
read() is simple enough and fill_read() being in a separate function
doesn't add anything. Let's collapse it into read(). This will make
merging bin file handling with regular file.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
