Commit Graph

306 Commits

Author SHA1 Message Date
Greg Kroah-Hartman
7586585897 [PATCH] PCI: clean up dynamic pci id logic
The dynamic pci id logic has been bothering me for a while, and now that
I started to look into how to move some of this to the driver core, I
thought it was time to clean it all up.

It ends up making the code smaller, and easier to follow, and fixes a
few bugs at the same time (dynamic ids were not being matched
everywhere, and so could be missed on some call paths for new devices,
semaphore not needed to be grabbed when adding a new id and calling the
driver core, etc.)

I also renamed the function pci_match_device() to pci_match_id() as
that's what it really does.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-01 13:35:50 -07:00
Dominik Brodowski
476835afd7 [PATCH] pcmcia: id_table for parport_cs.c
Add pcmcia_device_id table.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:13 -07:00
Martin Schitter
44e58a6a0b [PATCH] parport: NetMos nm9855 fix
kernel 2.6.12-rc2 adopted some code by Bjorn Helgaas supporting NetMos combo
controller cards. this implementation doesn't work for nm9855 based cards!

there are two reasons:

a) the module 'parport_pc' doesn't want to give the resonsibility for
   the netmos_9855 to 'parport_serial' and can not handle the serial lines
   -- trivial to fix...

   http://lists.infradead.org/pipermail/linux-parport/2005-February/000250.html
   http://lkml.org/lkml/2005/3/24/199 b) the support for the nm9855 in

   'parport_serial' still doesn't work because of wrong assumptions about
   the relevant BARs port address layout for this chip:

	 0000:00:09.0 Communication controller:
         	      NetMos Technology PCI 9855
         	      Multi-I/O Controller (rev 01)
	 	      (= 9710:9855)
         Subsystem: LSI Logic / Symbios Logic 1P4S (= 1000:0014)
  	 Flags: medium devsel, IRQ 177
	 I/O ports at a800 [size=8]  (= parport)
	 I/O ports at a400 [size=8]
	 I/O ports at a000 [size=8]  (= serial)
	 I/O ports at 9800 [size=8]  (= serial)
	 I/O ports at 9400 [size=8]  (= serial)
	 I/O ports at 9000 [size=16] (= serial)

the following patch will fix the problem.

Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:27 -07:00
Paulo Marques
543537bd92 [PATCH] create a kstrdup library function
This patch creates a new kstrdup library function and changes the "local"
implementations in several places to use this function.

Most of the changes come from the sound and net subsystems.  The sound part
had already been acknowledged by Takashi Iwai and the net part by David S.
Miller.

I left UML alone for now because I would need more time to read the code
carefully before making changes there.

Signed-off-by: Paulo Marques <pmarques@grupopie.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:18 -07:00
Al Viro
7fbacd5213 [PATCH] ISA_DMA Kconfig fixes - part 2 (parport_pc)
Part of parport_pc that uses ISA DMA helpers made conditional on
CONFIG_ISA_DMA_API.  As the result, driver got usable for boxen that do
not have ISA DMA stuff and have normal PCI parport card stuck into
them - these never use DMA anyway.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-04 07:33:13 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00