Commit Graph

10114 Commits

Author SHA1 Message Date
Arjun Roy
33946518d4 tcp-zerocopy: Return sk_err (if set) along with tcp receive zerocopy.
This patchset is intended to reduce the number of extra system calls
imposed by TCP receive zerocopy. For ping-pong RPC style workloads,
this patchset has demonstrated a system call reduction of about 30%
when coupled with userspace changes.

For applications using epoll, returning sk_err along with the result
of tcp receive zerocopy could remove the need to call
recvmsg()=-EAGAIN after a spurious wakeup.

Consider a multi-threaded application using epoll. A thread may awaken
with EPOLLIN but another thread may already be reading. The
spuriously-awoken thread does not necessarily know that another thread
'won'; rather, it may be possible that it was woken up due to the
presence of an error if there is no data. A zerocopy read receiving 0
bytes thus would need to be followed up by recvmsg to be sure.

Instead, we return sk_err directly with zerocopy, so the application
can avoid this extra system call.

Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16 19:25:02 -08:00
Arjun Roy
c8856c0514 tcp-zerocopy: Return inq along with tcp receive zerocopy.
This patchset is intended to reduce the number of extra system calls
imposed by TCP receive zerocopy. For ping-pong RPC style workloads,
this patchset has demonstrated a system call reduction of about 30%
when coupled with userspace changes.

For applications using edge-triggered epoll, returning inq along with
the result of tcp receive zerocopy could remove the need to call
recvmsg()=-EAGAIN after a successful zerocopy. Generally speaking,
since normally we would need to perform a recvmsg() call for every
successful small RPC read via TCP receive zerocopy, returning inq can
reduce the number of system calls performed by approximately half.

Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16 19:25:02 -08:00
Jason A. Donenfeld
0b41713b60 icmp: introduce helper for nat'd source address in network device context
This introduces a helper function to be called only by network drivers
that wraps calls to icmp[v6]_send in a conntrack transformation, in case
NAT has been used. We don't want to pollute the non-driver path, though,
so we introduce this as a helper to be called by places that actually
make use of this, as suggested by Florian.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13 14:19:00 -08:00
Linus Torvalds
33b40134e5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Use after free in rxrpc_put_local(), from David Howells.

 2) Fix 64-bit division error in mlxsw, from Nathan Chancellor.

 3) Make sure we clear various bits of TCP state in response to
    tcp_disconnect(). From Eric Dumazet.

 4) Fix netlink attribute policy in cls_rsvp, from Eric Dumazet.

 5) txtimer must be deleted in stmmac suspend(), from Nicolin Chen.

 6) Fix TC queue mapping in bnxt_en driver, from Michael Chan.

 7) Various netdevsim fixes from Taehee Yoo (use of uninitialized data,
    snapshot panics, stack out of bounds, etc.)

 8) cls_tcindex changes hash table size after allocating the table, fix
    from Cong Wang.

 9) Fix regression in the enforcement of session ID uniqueness in l2tp.
    We only have to enforce uniqueness for IP based tunnels not UDP
    ones. From Ridge Kennedy.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
  gtp: use __GFP_NOWARN to avoid memalloc warning
  l2tp: Allow duplicate session creation with UDP
  r8152: Add MAC passthrough support to new device
  net_sched: fix an OOB access in cls_tcindex
  qed: Remove set but not used variable 'p_link'
  tc-testing: add missing 'nsPlugin' to basic.json
  tc-testing: fix eBPF tests failure on linux fresh clones
  net: hsr: fix possible NULL deref in hsr_handle_frame()
  netdevsim: remove unused sdev code
  netdevsim: use __GFP_NOWARN to avoid memalloc warning
  netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs
  netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init()
  netdevsim: fix panic in nsim_dev_take_snapshot_write()
  netdevsim: disable devlink reload when resources are being used
  netdevsim: fix using uninitialized resources
  bnxt_en: Fix TC queue mapping.
  bnxt_en: Fix logic that disables Bus Master during firmware reset.
  bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset.
  bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected.
  net: stmmac: Delete txtimer in suspend()
  ...
2020-02-04 13:32:20 +00:00
Alexey Dobriyan
97a32539b9 proc: convert everything to "struct proc_ops"
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.

Conversion rule is:

	llseek		=> proc_lseek
	unlocked_ioctl	=> proc_ioctl

	xxx		=> proc_xxx

	delete ".owner = THIS_MODULE" line

[akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c]
[sfr@canb.auug.org.au: fix kernel/sched/psi.c]
  Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-04 03:05:26 +00:00
SeongJae Park
9603d47bad tcp: Reduce SYN resend delay if a suspicous ACK is received
When closing a connection, the two acks that required to change closing
socket's status to FIN_WAIT_2 and then TIME_WAIT could be processed in
reverse order.  This is possible in RSS disabled environments such as a
connection inside a host.

For example, expected state transitions and required packets for the
disconnection will be similar to below flow.

	 00 (Process A)				(Process B)
	 01 ESTABLISHED				ESTABLISHED
	 02 close()
	 03 FIN_WAIT_1
	 04 		---FIN-->
	 05 					CLOSE_WAIT
	 06 		<--ACK---
	 07 FIN_WAIT_2
	 08 		<--FIN/ACK---
	 09 TIME_WAIT
	 10 		---ACK-->
	 11 					LAST_ACK
	 12 CLOSED				CLOSED

In some cases such as LINGER option applied socket, the FIN and FIN/ACK
will be substituted to RST and RST/ACK, but there is no difference in
the main logic.

The acks in lines 6 and 8 are the acks.  If the line 8 packet is
processed before the line 6 packet, it will be just ignored as it is not
a expected packet, and the later process of the line 6 packet will
change the status of Process A to FIN_WAIT_2, but as it has already
handled line 8 packet, it will not go to TIME_WAIT and thus will not
send the line 10 packet to Process B.  Thus, Process B will left in
CLOSE_WAIT status, as below.

	 00 (Process A)				(Process B)
	 01 ESTABLISHED				ESTABLISHED
	 02 close()
	 03 FIN_WAIT_1
	 04 		---FIN-->
	 05 					CLOSE_WAIT
	 06 				(<--ACK---)
	 07	  			(<--FIN/ACK---)
	 08 				(fired in right order)
	 09 		<--FIN/ACK---
	 10 		<--ACK---
	 11 		(processed in reverse order)
	 12 FIN_WAIT_2

Later, if the Process B sends SYN to Process A for reconnection using
the same port, Process A will responds with an ACK for the last flow,
which has no increased sequence number.  Thus, Process A will send RST,
wait for TIMEOUT_INIT (one second in default), and then try
reconnection.  If reconnections are frequent, the one second latency
spikes can be a big problem.  Below is a tcpdump results of the problem:

    14.436259 IP 127.0.0.1.45150 > 127.0.0.1.4242: Flags [S], seq 2560603644
    14.436266 IP 127.0.0.1.4242 > 127.0.0.1.45150: Flags [.], ack 5, win 512
    14.436271 IP 127.0.0.1.45150 > 127.0.0.1.4242: Flags [R], seq 2541101298
    /* ONE SECOND DELAY */
    15.464613 IP 127.0.0.1.45150 > 127.0.0.1.4242: Flags [S], seq 2560603644

This commit mitigates the problem by reducing the delay for the next SYN
if the suspicous ACK is received while in SYN_SENT state.

Following commit will add a selftest, which can be also helpful for
understanding of this issue.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-02 13:33:21 -08:00
Eric Dumazet
784f8344de tcp: clear tp->segs_{in|out} in tcp_disconnect()
tp->segs_in and tp->segs_out need to be cleared in tcp_disconnect().

tcp_disconnect() is rarely used, but it is worth fixing it.

Fixes: 2efd055c53 ("tcp: add tcpi_segs_in and tcpi_segs_out to tcp_info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <mleitner@redhat.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31 22:12:37 -08:00
Eric Dumazet
db7ffee6f3 tcp: clear tp->data_segs{in|out} in tcp_disconnect()
tp->data_segs_in and tp->data_segs_out need to be cleared
in tcp_disconnect().

tcp_disconnect() is rarely used, but it is worth fixing it.

Fixes: a44d6eacda ("tcp: Add RFC4898 tcpEStatsPerfDataSegsOut/In")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31 22:12:22 -08:00
Eric Dumazet
2fbdd56251 tcp: clear tp->delivered in tcp_disconnect()
tp->delivered needs to be cleared in tcp_disconnect().

tcp_disconnect() is rarely used, but it is worth fixing it.

Fixes: ddf1af6fa0 ("tcp: new delivery accounting")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31 22:12:18 -08:00
Eric Dumazet
c13c48c00a tcp: clear tp->total_retrans in tcp_disconnect()
total_retrans needs to be cleared in tcp_disconnect().

tcp_disconnect() is rarely used, but it is worth fixing it.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31 22:11:35 -08:00
Florian Westphal
ae2dd71649 mptcp: handle tcp fallback when using syn cookies
We can't deal with syncookie mode yet, the syncookie rx path will create
tcp reqsk, i.e. we get OOB access because we treat tcp reqsk as mptcp reqsk one:

TCP: SYN flooding on port 20002. Sending cookies.
BUG: KASAN: slab-out-of-bounds in subflow_syn_recv_sock+0x451/0x4d0 net/mptcp/subflow.c:191
Read of size 1 at addr ffff8881167bc148 by task syz-executor099/2120
 subflow_syn_recv_sock+0x451/0x4d0 net/mptcp/subflow.c:191
 tcp_get_cookie_sock+0xcf/0x520 net/ipv4/syncookies.c:209
 cookie_v6_check+0x15a5/0x1e90 net/ipv6/syncookies.c:252
 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1123 [inline]
 [..]

Bug can be reproduced via "sysctl net.ipv4.tcp_syncookies=2".

Note that MPTCP should work with syncookies (4th ack would carry needed
state), but it appears better to sort that out in -next so do tcp
fallback for now.

I removed the MPTCP ifdef for tcp_rsk "is_mptcp" member because
if (IS_ENABLED()) is easier to read than "#ifdef IS_ENABLED()/#endif" pair.

Cc: Eric Dumazet <edumazet@google.com>
Fixes: cec37a6e41 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Reported-by: Christoph Paasch <cpaasch@apple.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-29 17:45:20 +01:00
Steffen Klassert
9fd1ff5d2a udp: Support UDP fraglist GRO/GSO.
This patch extends UDP GRO to support fraglist GRO/GSO
by using the previously introduced infrastructure.
If the feature is enabled, all UDP packets are going to
fraglist GRO (local input and forward).

After validating the csum,  we mark ip_summed as
CHECKSUM_UNNECESSARY for fraglist GRO packets to
make sure that the csum is not touched.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27 11:00:21 +01:00
Stephen Worley
f9e9555575 net: include struct nhmsg size in nh nlmsg size
Include the size of struct nhmsg size when calculating
how much of a payload to allocate in a new netlink nexthop
notification message.

Without this, we will fail to fill the skbuff at certain nexthop
group sizes.

You can reproduce the failure with the following iproute2 commands:

ip link add dummy1 type dummy
ip link add dummy2 type dummy
ip link add dummy3 type dummy
ip link add dummy4 type dummy
ip link add dummy5 type dummy
ip link add dummy6 type dummy
ip link add dummy7 type dummy
ip link add dummy8 type dummy
ip link add dummy9 type dummy
ip link add dummy10 type dummy
ip link add dummy11 type dummy
ip link add dummy12 type dummy
ip link add dummy13 type dummy
ip link add dummy14 type dummy
ip link add dummy15 type dummy
ip link add dummy16 type dummy
ip link add dummy17 type dummy
ip link add dummy18 type dummy
ip link add dummy19 type dummy

ip ro add 1.1.1.1/32 dev dummy1
ip ro add 1.1.1.2/32 dev dummy2
ip ro add 1.1.1.3/32 dev dummy3
ip ro add 1.1.1.4/32 dev dummy4
ip ro add 1.1.1.5/32 dev dummy5
ip ro add 1.1.1.6/32 dev dummy6
ip ro add 1.1.1.7/32 dev dummy7
ip ro add 1.1.1.8/32 dev dummy8
ip ro add 1.1.1.9/32 dev dummy9
ip ro add 1.1.1.10/32 dev dummy10
ip ro add 1.1.1.11/32 dev dummy11
ip ro add 1.1.1.12/32 dev dummy12
ip ro add 1.1.1.13/32 dev dummy13
ip ro add 1.1.1.14/32 dev dummy14
ip ro add 1.1.1.15/32 dev dummy15
ip ro add 1.1.1.16/32 dev dummy16
ip ro add 1.1.1.17/32 dev dummy17
ip ro add 1.1.1.18/32 dev dummy18
ip ro add 1.1.1.19/32 dev dummy19

ip next add id 1 via 1.1.1.1 dev dummy1
ip next add id 2 via 1.1.1.2 dev dummy2
ip next add id 3 via 1.1.1.3 dev dummy3
ip next add id 4 via 1.1.1.4 dev dummy4
ip next add id 5 via 1.1.1.5 dev dummy5
ip next add id 6 via 1.1.1.6 dev dummy6
ip next add id 7 via 1.1.1.7 dev dummy7
ip next add id 8 via 1.1.1.8 dev dummy8
ip next add id 9 via 1.1.1.9 dev dummy9
ip next add id 10 via 1.1.1.10 dev dummy10
ip next add id 11 via 1.1.1.11 dev dummy11
ip next add id 12 via 1.1.1.12 dev dummy12
ip next add id 13 via 1.1.1.13 dev dummy13
ip next add id 14 via 1.1.1.14 dev dummy14
ip next add id 15 via 1.1.1.15 dev dummy15
ip next add id 16 via 1.1.1.16 dev dummy16
ip next add id 17 via 1.1.1.17 dev dummy17
ip next add id 18 via 1.1.1.18 dev dummy18
ip next add id 19 via 1.1.1.19 dev dummy19

ip next add id 1111 group 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/17/18/19
ip next del id 1111

Fixes: 430a049190 ("nexthop: Add support for nexthop groups")
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27 10:54:08 +01:00
Abdul Kabbani
32efcc06d2 tcp: export count for rehash attempts
Using IPv6 flow-label to swiftly route around avoid congested or
disconnected network path can greatly improve TCP reliability.

This patch adds SNMP counters and a OPT_STATS counter to track both
host-level and connection-level statistics. Network administrators
can use these counters to evaluate the impact of this new ability better.

Export count for rehash attempts to
1) two SNMP counters: TcpTimeoutRehash (rehash due to timeouts),
   and TcpDuplicateDataRehash (rehash due to receiving duplicate
   packets)
2) Timestamping API SOF_TIMESTAMPING_OPT_STATS.

Signed-off-by: Abdul Kabbani <akabbani@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Kevin(Yudong) Yang <yyd@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26 15:28:47 +01:00
David S. Miller
4d8773b68e Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Minor conflict in mlx5 because changes happened to code that has
moved meanwhile.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26 10:40:21 +01:00
Christoph Paasch
cc7972ea19 mptcp: parse and emit MP_CAPABLE option according to v1 spec
This implements MP_CAPABLE options parsing and writing according
to RFC 6824 bis / RFC 8684: MPTCP v1.

Local key is sent on syn/ack, and both keys are sent on 3rd ack.
MP_CAPABLE messages len are updated accordingly. We need the skbuff to
correctly emit the above, so we push the skbuff struct as an argument
all the way from tcp code to the relevant mptcp callbacks.

When processing incoming MP_CAPABLE + data, build a full blown DSS-like
map info, to simplify later processing.  On child socket creation, we
need to record the remote key, if available.

Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24 13:44:08 +01:00
Mat Martineau
648ef4b886 mptcp: Implement MPTCP receive path
Parses incoming DSS options and populates outgoing MPTCP ACK
fields. MPTCP fields are parsed from the TCP option header and placed in
an skb extension, allowing the upper MPTCP layer to access MPTCP
options after the skb has gone through the TCP stack.

The subflow implements its own data_ready() ops, which ensures that the
pending data is in sequence - according to MPTCP seq number - dropping
out-of-seq skbs. The DATA_READY bit flag is set if this is the case.
This allows the MPTCP socket layer to determine if more data is
available without having to consult the individual subflows.

It additionally validates the current mapping and propagates EoF events
to the connection socket.

Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24 13:44:07 +01:00
Peter Krystad
cec37a6e41 mptcp: Handle MP_CAPABLE options for outgoing connections
Add hooks to tcp_output.c to add MP_CAPABLE to an outgoing SYN request,
to capture the MP_CAPABLE in the received SYN-ACK, to add MP_CAPABLE to
the final ACK of the three-way handshake.

Use the .sk_rx_dst_set() handler in the subflow proto to capture when the
responding SYN-ACK is received and notify the MPTCP connection layer.

Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24 13:44:07 +01:00
Peter Krystad
eda7acddf8 mptcp: Handle MPTCP TCP options
Add hooks to parse and format the MP_CAPABLE option.

This option is handled according to MPTCP version 0 (RFC6824).
MPTCP version 1 MP_CAPABLE (RFC6824bis/RFC8684) will be added later in
coordination with related code changes.

Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24 13:44:07 +01:00
Mat Martineau
f870fa0b57 mptcp: Add MPTCP socket stubs
Implements the infrastructure for MPTCP sockets.

MPTCP sockets open one in-kernel TCP socket per subflow. These subflow
sockets are only managed by the MPTCP socket that owns them and are not
visible from userspace. This commit allows a userspace program to open
an MPTCP socket with:

  sock = socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP);

The resulting socket is simply a wrapper around a single regular TCP
socket, without any of the MPTCP protocol implemented over the wire.

Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24 13:44:07 +01:00
Vasily Averin
a3ea86739f rt_cpu_seq_next should increase position index
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24 11:42:18 +01:00
Eric Dumazet
2bec445f9b tcp: do not leave dangling pointers in tp->highest_sack
Latest commit 853697504d ("tcp: Fix highest_sack and highest_sack_seq")
apparently allowed syzbot to trigger various crashes in TCP stack [1]

I believe this commit only made things easier for syzbot to find
its way into triggering use-after-frees. But really the bugs
could lead to bad TCP behavior or even plain crashes even for
non malicious peers.

I have audited all calls to tcp_rtx_queue_unlink() and
tcp_rtx_queue_unlink_and_free() and made sure tp->highest_sack would be updated
if we are removing from rtx queue the skb that tp->highest_sack points to.

These updates were missing in three locations :

1) tcp_clean_rtx_queue() [This one seems quite serious,
                          I have no idea why this was not caught earlier]

2) tcp_rtx_queue_purge() [Probably not a big deal for normal operations]

3) tcp_send_synack()     [Probably not a big deal for normal operations]

[1]
BUG: KASAN: use-after-free in tcp_highest_sack_seq include/net/tcp.h:1864 [inline]
BUG: KASAN: use-after-free in tcp_highest_sack_seq include/net/tcp.h:1856 [inline]
BUG: KASAN: use-after-free in tcp_check_sack_reordering+0x33c/0x3a0 net/ipv4/tcp_input.c:891
Read of size 4 at addr ffff8880a488d068 by task ksoftirqd/1/16

CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
 kasan_report+0x12/0x20 mm/kasan/common.c:639
 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:134
 tcp_highest_sack_seq include/net/tcp.h:1864 [inline]
 tcp_highest_sack_seq include/net/tcp.h:1856 [inline]
 tcp_check_sack_reordering+0x33c/0x3a0 net/ipv4/tcp_input.c:891
 tcp_try_undo_partial net/ipv4/tcp_input.c:2730 [inline]
 tcp_fastretrans_alert+0xf74/0x23f0 net/ipv4/tcp_input.c:2847
 tcp_ack+0x2577/0x5bf0 net/ipv4/tcp_input.c:3710
 tcp_rcv_established+0x6dd/0x1e90 net/ipv4/tcp_input.c:5706
 tcp_v4_do_rcv+0x619/0x8d0 net/ipv4/tcp_ipv4.c:1619
 tcp_v4_rcv+0x307f/0x3b40 net/ipv4/tcp_ipv4.c:2001
 ip_protocol_deliver_rcu+0x5a/0x880 net/ipv4/ip_input.c:204
 ip_local_deliver_finish+0x23b/0x380 net/ipv4/ip_input.c:231
 NF_HOOK include/linux/netfilter.h:307 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 ip_local_deliver+0x1e9/0x520 net/ipv4/ip_input.c:252
 dst_input include/net/dst.h:442 [inline]
 ip_rcv_finish+0x1db/0x2f0 net/ipv4/ip_input.c:428
 NF_HOOK include/linux/netfilter.h:307 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 ip_rcv+0xe8/0x3f0 net/ipv4/ip_input.c:538
 __netif_receive_skb_one_core+0x113/0x1a0 net/core/dev.c:5148
 __netif_receive_skb+0x2c/0x1d0 net/core/dev.c:5262
 process_backlog+0x206/0x750 net/core/dev.c:6093
 napi_poll net/core/dev.c:6530 [inline]
 net_rx_action+0x508/0x1120 net/core/dev.c:6598
 __do_softirq+0x262/0x98c kernel/softirq.c:292
 run_ksoftirqd kernel/softirq.c:603 [inline]
 run_ksoftirqd+0x8e/0x110 kernel/softirq.c:595
 smpboot_thread_fn+0x6a3/0xa40 kernel/smpboot.c:165
 kthread+0x361/0x430 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Allocated by task 10091:
 save_stack+0x23/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 __kasan_kmalloc mm/kasan/common.c:513 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:521
 slab_post_alloc_hook mm/slab.h:584 [inline]
 slab_alloc_node mm/slab.c:3263 [inline]
 kmem_cache_alloc_node+0x138/0x740 mm/slab.c:3575
 __alloc_skb+0xd5/0x5e0 net/core/skbuff.c:198
 alloc_skb_fclone include/linux/skbuff.h:1099 [inline]
 sk_stream_alloc_skb net/ipv4/tcp.c:875 [inline]
 sk_stream_alloc_skb+0x113/0xc90 net/ipv4/tcp.c:852
 tcp_sendmsg_locked+0xcf9/0x3470 net/ipv4/tcp.c:1282
 tcp_sendmsg+0x30/0x50 net/ipv4/tcp.c:1432
 inet_sendmsg+0x9e/0xe0 net/ipv4/af_inet.c:807
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:672
 __sys_sendto+0x262/0x380 net/socket.c:1998
 __do_sys_sendto net/socket.c:2010 [inline]
 __se_sys_sendto net/socket.c:2006 [inline]
 __x64_sys_sendto+0xe1/0x1a0 net/socket.c:2006
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 10095:
 save_stack+0x23/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 kasan_set_free_info mm/kasan/common.c:335 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
 __cache_free mm/slab.c:3426 [inline]
 kmem_cache_free+0x86/0x320 mm/slab.c:3694
 kfree_skbmem+0x178/0x1c0 net/core/skbuff.c:645
 __kfree_skb+0x1e/0x30 net/core/skbuff.c:681
 sk_eat_skb include/net/sock.h:2453 [inline]
 tcp_recvmsg+0x1252/0x2930 net/ipv4/tcp.c:2166
 inet_recvmsg+0x136/0x610 net/ipv4/af_inet.c:838
 sock_recvmsg_nosec net/socket.c:886 [inline]
 sock_recvmsg net/socket.c:904 [inline]
 sock_recvmsg+0xce/0x110 net/socket.c:900
 __sys_recvfrom+0x1ff/0x350 net/socket.c:2055
 __do_sys_recvfrom net/socket.c:2073 [inline]
 __se_sys_recvfrom net/socket.c:2069 [inline]
 __x64_sys_recvfrom+0xe1/0x1a0 net/socket.c:2069
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8880a488d040
 which belongs to the cache skbuff_fclone_cache of size 456
The buggy address is located 40 bytes inside of
 456-byte region [ffff8880a488d040, ffff8880a488d208)
The buggy address belongs to the page:
page:ffffea0002922340 refcount:1 mapcount:0 mapping:ffff88821b057000 index:0x0
raw: 00fffe0000000200 ffffea00022a5788 ffffea0002624a48 ffff88821b057000
raw: 0000000000000000 ffff8880a488d040 0000000100000006 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880a488cf00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8880a488cf80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8880a488d000: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
                                                          ^
 ffff8880a488d080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880a488d100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 853697504d ("tcp: Fix highest_sack and highest_sack_seq")
Fixes: 50895b9de1 ("tcp: highest_sack fix")
Fixes: 737ff31456 ("tcp: use sequence distance to detect reordering")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cambda Zhu <cambda@linux.alibaba.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24 09:06:48 +01:00
Kristian Evensen
bb48eb9b12 fou: Fix IPv6 netlink policy
When submitting v2 of "fou: Support binding FoU socket" (1713cb37bf),
I accidentally sent the wrong version of the patch and one fix was
missing. In the initial version of the patch, as well as the version 2
that I submitted, I incorrectly used ".type" for the two V6-attributes.
The correct is to use ".len".

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 1713cb37bf ("fou: Support binding FoU socket")
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23 14:32:52 +01:00
David S. Miller
954b3c4397 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-01-22

The following pull-request contains BPF updates for your *net-next* tree.

We've added 92 non-merge commits during the last 16 day(s) which contain
a total of 320 files changed, 7532 insertions(+), 1448 deletions(-).

The main changes are:

1) function by function verification and program extensions from Alexei.

2) massive cleanup of selftests/bpf from Toke and Andrii.

3) batched bpf map operations from Brian and Yonghong.

4) tcp congestion control in bpf from Martin.

5) bulking for non-map xdp_redirect form Toke.

6) bpf_send_signal_thread helper from Yonghong.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23 08:10:16 +01:00
Paolo Abeni
d39ca2590d Revert "udp: do rmem bulk free even if the rx sk queue is empty"
This reverts commit 0d4a6608f6.

Williem reported that after commit 0d4a6608f6 ("udp: do rmem bulk
free even if the rx sk queue is empty") the memory allocated by
an almost idle system with many UDP sockets can grow a lot.

For stable kernel keep the solution as simple as possible and revert
the offending commit.

Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Diagnosed-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: 0d4a6608f6 ("udp: do rmem bulk free even if the rx sk queue is empty")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-22 21:09:03 +01:00
William Dauchy
d0f4185160 net, ip_tunnel: fix namespaces move
in the same manner as commit 690afc165b ("net: ip6_gre: fix moving
ip6gre between namespaces"), fix namespace moving as it was broken since
commit 2e15ea390e ("ip_gre: Add support to collect tunnel metadata.").
Indeed, the ip6_gre commit removed the local flag for collect_md
condition, so there is no reason to keep it for ip_gre/ip_tunnel.

this patch will fix both ip_tunnel and ip_gre modules.

Fixes: 2e15ea390e ("ip_gre: Add support to collect tunnel metadata.")
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21 16:05:21 +01:00
David S. Miller
4f2c17e0f3 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2020-01-21

1) Add support for TCP encapsulation of IKE and ESP messages,
   as defined by RFC 8229. Patchset from Sabrina Dubroca.

Please note that there is a merge conflict in:

net/unix/af_unix.c

between commit:

3c32da19a8 ("unix: Show number of pending scm files of receive queue in fdinfo")

from the net-next tree and commit:

b50b0580d2 ("net: add queue argument to __skb_wait_for_more_packets and __skb_{,try_}recv_datagram")

from the ipsec-next tree.

The conflict can be solved as done in linux-next.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21 12:18:20 +01:00
Alex Shi
aeaec7bceb tcp/ipv4: remove AF_INET_FAMILY
After commit 079096f103 ("tcp/dccp: install syn_recv requests into ehash table")
the macro isn't used anymore. remove it.

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21 12:03:51 +01:00
Theodore Dubois
bfe02b9f94 tcp: remove redundant assigment to snd_cwnd
Not sure how this got in here. git blame says the second assignment was
added in 3a9a57f6, but that commit also removed the first assignment.

Signed-off-by: Theodore Dubois <tblodt@icloud.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21 10:52:29 +01:00
Wen Yang
5b2f1f3070 tcp_bbr: improve arithmetic division in bbr_update_bw()
do_div() does a 64-by-32 division. Use div64_long() instead of it
if the divisor is long, to avoid truncation to 32-bit.
And as a nice side effect also cleans up the function a bit.

Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21 10:45:49 +01:00
David S. Miller
9c5ed2f831 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:

====================
pull request (net): ipsec 2020-01-21

1) Fix packet tx through bpf_redirect() for xfrm and vti
   interfaces. From Nicolas Dichtel.

2) Do not confirm neighbor when do pmtu update on a virtual
   xfrm interface. From Xu Wang.

3) Support output_mark for offload ESP packets, this was
   forgotten when the output_mark was added initially.
   From Ulrich Weber.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21 09:25:58 +01:00
David S. Miller
b3f7e3f23a Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net 2020-01-19 22:10:04 +01:00
David S. Miller
a72b6a1ee4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter updates for net

The following patchset contains Netfilter fixes for net:

1) Fix use-after-free in ipset bitmap destroy path, from Cong Wang.

2) Missing init netns in entry cleanup path of arp_tables,
   from Florian Westphal.

3) Fix WARN_ON in set destroy path due to missing cleanup on
   transaction error.

4) Incorrect netlink sanity check in tunnel, from Florian Westphal.

5) Missing sanity check for erspan version netlink attribute, also
   from Florian.

6) Remove WARN in nft_request_module() that can be triggered from
   userspace, from Florian Westphal.

7) Memleak in NFTA_HOOK_DEVS netlink parser, from Dan Carpenter.

8) List poison from commit path for flowtables that are added and
   deleted in the same batch, from Florian Westphal.

9) Fix NAT ICMP packet corruption, from Eyal Birger.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17 10:36:07 +01:00
David S. Miller
3981f955eb Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2020-01-15

The following pull-request contains BPF updates for your *net* tree.

We've added 12 non-merge commits during the last 9 day(s) which contain
a total of 13 files changed, 95 insertions(+), 43 deletions(-).

The main changes are:

1) Fix refcount leak for TCP time wait and request sockets for socket lookup
   related BPF helpers, from Lorenz Bauer.

2) Fix wrong verification of ARSH instruction under ALU32, from Daniel Borkmann.

3) Batch of several sockmap and related TLS fixes found while operating
   more complex BPF programs with Cilium and OpenSSL, from John Fastabend.

4) Fix sockmap to read psock's ingress_msg queue before regular sk_receive_queue()
   to avoid purging data upon teardown, from Lingpeng Chen.

5) Fix printing incorrect pointer in bpftool's btf_dump_ptr() in order to properly
   dump a BPF map's value with BTF, from Martin KaFai Lau.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-16 10:04:40 +01:00
John Fastabend
7361d44896 bpf: Sockmap/tls, fix pop data with SK_DROP return code
When user returns SK_DROP we need to reset the number of copied bytes
to indicate to the user the bytes were dropped and not sent. If we
don't reset the copied arg sendmsg will return as if those bytes were
copied giving the user a positive return value.

This works as expected today except in the case where the user also
pops bytes. In the pop case the sg.size is reduced but we don't correctly
account for this when copied bytes is reset. The popped bytes are not
accounted for and we return a small positive value potentially confusing
the user.

The reason this happens is due to a typo where we do the wrong comparison
when accounting for pop bytes. In this fix notice the if/else is not
needed and that we have a similar problem if we push data except its not
visible to the user because if delta is larger the sg.size we return a
negative value so it appears as an error regardless.

Fixes: 7246d8ed4d ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-9-john.fastabend@gmail.com
2020-01-15 23:26:13 +01:00
John Fastabend
33bfe20dd7 bpf: Sockmap/tls, push write_space updates through ulp updates
When sockmap sock with TLS enabled is removed we cleanup bpf/psock state
and call tcp_update_ulp() to push updates to TLS ULP on top. However, we
don't push the write_space callback up and instead simply overwrite the
op with the psock stored previous op. This may or may not be correct so
to ensure we don't overwrite the TLS write space hook pass this field to
the ULP and have it fixup the ctx.

This completes a previous fix that pushed the ops through to the ULP
but at the time missed doing this for write_space, presumably because
write_space TLS hook was added around the same time.

Fixes: 95fa145479 ("bpf: sockmap/tls, close can race with map free")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-4-john.fastabend@gmail.com
2020-01-15 23:26:13 +01:00
Pengcheng Yang
e176b1ba47 tcp: fix marked lost packets not being retransmitted
When the packet pointed to by retransmit_skb_hint is unlinked by ACK,
retransmit_skb_hint will be set to NULL in tcp_clean_rtx_queue().
If packet loss is detected at this time, retransmit_skb_hint will be set
to point to the current packet loss in tcp_verify_retransmit_hint(),
then the packets that were previously marked lost but not retransmitted
due to the restriction of cwnd will be skipped and cannot be
retransmitted.

To fix this, when retransmit_skb_hint is NULL, retransmit_skb_hint can
be reset only after all marked lost packets are retransmitted
(retrans_out >= lost_out), otherwise we need to traverse from
tcp_rtx_queue_head in tcp_xmit_retransmit_queue().

Packetdrill to demonstrate:

// Disable RACK and set max_reordering to keep things simple
    0 `sysctl -q net.ipv4.tcp_recovery=0`
   +0 `sysctl -q net.ipv4.tcp_max_reordering=3`

// Establish a connection
   +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
   +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
   +0 bind(3, ..., ...) = 0
   +0 listen(3, 1) = 0

  +.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
   +0 > S. 0:0(0) ack 1 <...>
 +.01 < . 1:1(0) ack 1 win 257
   +0 accept(3, ..., ...) = 4

// Send 8 data segments
   +0 write(4, ..., 8000) = 8000
   +0 > P. 1:8001(8000) ack 1

// Enter recovery and 1:3001 is marked lost
 +.01 < . 1:1(0) ack 1 win 257 <sack 3001:4001,nop,nop>
   +0 < . 1:1(0) ack 1 win 257 <sack 5001:6001 3001:4001,nop,nop>
   +0 < . 1:1(0) ack 1 win 257 <sack 5001:7001 3001:4001,nop,nop>

// Retransmit 1:1001, now retransmit_skb_hint points to 1001:2001
   +0 > . 1:1001(1000) ack 1

// 1001:2001 was ACKed causing retransmit_skb_hint to be set to NULL
 +.01 < . 1:1(0) ack 2001 win 257 <sack 5001:8001 3001:4001,nop,nop>
// Now retransmit_skb_hint points to 4001:5001 which is now marked lost

// BUG: 2001:3001 was not retransmitted
   +0 > . 2001:3001(1000) ack 1

Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15 22:34:31 +01:00
Ulrich Weber
4e4362d2bf xfrm: support output_mark for offload ESP packets
Commit 9b42c1f179 ("xfrm: Extend the output_mark") added output_mark
support but missed ESP offload support.

xfrm_smark_get() is not called within xfrm_input() for packets coming
from esp4_gro_receive() or esp6_gro_receive(). Therefore call
xfrm_smark_get() directly within these functions.

Fixes: 9b42c1f179 ("xfrm: Extend the output_mark to support input direction and masking.")
Signed-off-by: Ulrich Weber <ulrich.weber@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-01-15 12:18:35 +01:00
Ido Schimmel
90b93f1b31 ipv4: Add "offload" and "trap" indications to routes
When performing L3 offload, routes and nexthops are usually programmed
into two different tables in the underlying device. Therefore, the fact
that a nexthop resides in hardware does not necessarily mean that all
the associated routes also reside in hardware and vice-versa.

While the kernel can signal to user space the presence of a nexthop in
hardware (via 'RTNH_F_OFFLOAD'), it does not have a corresponding flag
for routes. In addition, the fact that a route resides in hardware does
not necessarily mean that the traffic is offloaded. For example,
unreachable routes (i.e., 'RTN_UNREACHABLE') are programmed to trap
packets to the CPU so that the kernel will be able to generate the
appropriate ICMP error packet.

This patch adds an "offload" and "trap" indications to IPv4 routes, so
that users will have better visibility into the offload process.

'struct fib_alias' is extended with two new fields that indicate if the
route resides in hardware or not and if it is offloading traffic from
the kernel or trapping packets to it. Note that the new fields are added
in the 6 bytes hole and therefore the struct still fits in a single
cache line [1].

Capable drivers are expected to invoke fib_alias_hw_flags_set() with the
route's key in order to set the flags.

The indications are dumped to user space via a new flags (i.e.,
'RTM_F_OFFLOAD' and 'RTM_F_TRAP') in the 'rtm_flags' field in the
ancillary header.

v2:
* Make use of 'struct fib_rt_info' in fib_alias_hw_flags_set()

[1]
struct fib_alias {
        struct hlist_node  fa_list;                      /*     0    16 */
        struct fib_info *          fa_info;              /*    16     8 */
        u8                         fa_tos;               /*    24     1 */
        u8                         fa_type;              /*    25     1 */
        u8                         fa_state;             /*    26     1 */
        u8                         fa_slen;              /*    27     1 */
        u32                        tb_id;                /*    28     4 */
        s16                        fa_default;           /*    32     2 */
        u8                         offload:1;            /*    34: 0  1 */
        u8                         trap:1;               /*    34: 1  1 */
        u8                         unused:6;             /*    34: 2  1 */

        /* XXX 5 bytes hole, try to pack */

        struct callback_head rcu __attribute__((__aligned__(8))); /*    40    16 */

        /* size: 56, cachelines: 1, members: 12 */
        /* sum members: 50, holes: 1, sum holes: 5 */
        /* sum bitfield members: 8 bits (1 bytes) */
        /* forced alignments: 1, forced holes: 1, sum forced holes: 5 */
        /* last cacheline: 56 bytes */
} __attribute__((__aligned__(8)));

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 18:53:35 -08:00
Ido Schimmel
1e301fd04e ipv4: Encapsulate function arguments in a struct
fib_dump_info() is used to prepare RTM_{NEW,DEL}ROUTE netlink messages
using the passed arguments. Currently, the function takes 11 arguments,
6 of which are attributes of the route being dumped (e.g., prefix, TOS).

The next patch will need the function to also dump to user space an
indication if the route is present in hardware or not. Instead of
passing yet another argument, change the function to take a struct
containing the different route attributes.

v2:
* Name last argument of fib_dump_info()
* Move 'struct fib_rt_info' to include/net/ip_fib.h so that it could
  later be passed to fib_alias_hw_flags_set()

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 18:53:35 -08:00
Ido Schimmel
6324d0fa03 ipv4: Replace route in list before notifying
Subsequent patches will add an offload / trap indication to routes which
will signal if the route is present in hardware or not.

After programming the route to the hardware, drivers will have to ask
the IPv4 code to set the flags by passing the route's key.

In the case of route replace, the new route is notified before it is
actually inserted into the FIB alias list. This can prevent simple
drivers (e.g., netdevsim) that program the route to the hardware in the
same context it is notified in from being able to set the flag.

Solve this by first inserting the new route to the list and rollback the
operation in case the route was vetoed.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 18:53:35 -08:00
Jason A. Donenfeld
88bebdf5b2 net: ipv4: use skb_list_walk_safe helper for gso segments
This is a straight-forward conversion case for the new function, keeping
the flow of the existing code as intact as possible.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 11:48:41 -08:00
Jason A. Donenfeld
1a186c14ce net: udp: use skb_list_walk_safe helper for gso segments
This is a straight-forward conversion case for the new function,
iterating over the return value from udp_rcv_segment, which actually is
a wrapper around skb_gso_segment.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 11:48:41 -08:00
Nicolas Dichtel
95224166a9 vti[6]: fix packet tx through bpf_redirect()
With an ebpf program that redirects packets through a vti[6] interface,
the packets are dropped because no dst is attached.

This could also be reproduced with an AF_PACKET socket, with the following
python script (vti1 is an ip_vti interface):

 import socket
 send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0)
 # scapy
 # p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request')
 # raw(p)
 req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00'
 send_s.sendto(req, ('vti1', 0x800, 0, 0))

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-01-14 08:55:38 +01:00
Florian Westphal
212e7f5660 netfilter: arp_tables: init netns pointer in xt_tgdtor_param struct
An earlier commit (1b789577f6,
"netfilter: arp_tables: init netns pointer in xt_tgchk_param struct")
fixed missing net initialization for arptables, but turns out it was
incomplete.  We can get a very similar struct net NULL deref during
error unwinding:

general protection fault: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:xt_rateest_put+0xa1/0x440 net/netfilter/xt_RATEEST.c:77
 xt_rateest_tg_destroy+0x72/0xa0 net/netfilter/xt_RATEEST.c:175
 cleanup_entry net/ipv4/netfilter/arp_tables.c:509 [inline]
 translate_table+0x11f4/0x1d80 net/ipv4/netfilter/arp_tables.c:587
 do_replace net/ipv4/netfilter/arp_tables.c:981 [inline]
 do_arpt_set_ctl+0x317/0x650 net/ipv4/netfilter/arp_tables.c:1461

Also init the netns pointer in xt_tgdtor_param struct.

Fixes: add6746124 ("netfilter: add struct net * to target parameters")
Reported-by: syzbot+91bdd8eece0f6629ec8b@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-13 19:22:10 +01:00
David Ahern
9827c0634e ipv4: Detect rollover in specific fib table dump
Sven-Haegar reported looping on fib dumps when 255.255.255.255 route has
been added to a table. The looping is caused by the key rolling over from
FFFFFFFF to 0. When dumping a specific table only, we need a means to detect
when the table dump is done. The key and count saved to cb args are both 0
only at the start of the table dump. If key is 0 and count > 0, then we are
in the rollover case. Detect and return to avoid looping.

This only affects dumps of a specific table; for dumps of all tables
(the case prior to the change in the Fixes tag) inet_dump_fib moved
the entry counter to the next table and reset the cb args used by
fib_table_dump and fn_trie_dump_leaf, so the rollover ffffffff back
to 0 did not cause looping with the dumps.

Fixes: effe679266 ("net: Enable kernel side filtering of route dumps")
Reported-by: Sven-Haegar Koch <haegar@sdinet.de>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10 11:36:36 -08:00
Mat Martineau
9cfcca2389 tcp: Check for filled TCP option space before SACK
Update the SACK check to work with zero option space available, a case
that's possible with MPTCP but not MD5+TS. Maintained only one
conditional branch for insufficient SACK space.

v1 -> v2:
- Moves the check inside the SACK branch by taking recent SACK fix:

    9424e2e7ad (tcp: md5: fix potential overestimation of TCP option space)

  in to account, but modifies it to work in MPTCP scenarios beyond the
  MD5+TS corner case.

Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09 18:41:41 -08:00
Mat Martineau
35b2c32116 tcp: Export TCP functions and ops struct
MPTCP will make use of tcp_send_mss() and tcp_push() when sending
data to specific TCP subflows.

tcp_request_sock_ipvX_ops and ipvX_specific will be referenced
during TCP subflow creation.

Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09 18:41:41 -08:00
Mat Martineau
8571248411 tcp: coalesce/collapse must respect MPTCP extensions
Coalesce and collapse of packets carrying MPTCP extensions is allowed
when the newer packet has no extension or the extensions carried by both
packets are equal.

This allows merging of TSO packet trains and even cross-TSO packets, and
does not require any additional action when moving data into existing
SKBs.

v3 -> v4:
 - allow collapsing, under mptcp_skb_can_collapse() constraint

v5 -> v6:
 - clarify MPTCP skb extensions must always be cleared at allocation
   time

Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09 18:41:41 -08:00
Mat Martineau
1323059301 tcp, ulp: Add clone operation to tcp_ulp_ops
If ULP is used on a listening socket, icsk_ulp_ops and icsk_ulp_data are
copied when the listener is cloned. Sometimes the clone is immediately
deleted, which will invoke the release op on the clone and likely
corrupt the listening socket's icsk_ulp_data.

The clone operation is invoked immediately after the clone is copied and
gives the ULP type an opportunity to set up the clone socket and its
icsk_ulp_data.

The MPTCP ULP clone will silently fallback to plain TCP on allocation
failure, so 'clone()' does not need to return an error code.

v6 -> v7:
 - move and rename ulp clone helper to make it inline-friendly
v5 -> v6:
 - clarified MPTCP clone usage in commit message

Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09 18:41:41 -08:00