Add the ReadSerial definitions for Arcturus to the arcturus_ppsmc.h
header for use with unique_id
Unrevert: Supported in SMU 54.23, update values to match SMU spec
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Module parameter amdgpu_ras_mask has been involved in
the calculation of ras support capability, so drop this
redundant code.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the fru eeprom header guard and include it in the .c file.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gpu reset is implemented for navi so we can enable this.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
navi never supported the pci config reset. Neither did
vega.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For access via ioctl for tools like umr and mesa.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than relying on gpu info firmware.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than checking of the variable is enabled and the
chip is the right family check for the presence of the
discovery table.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GPU info firmware is only applicable at bring up when the
IP discovery table is not present. If it's available, use that
first and then fallback to parsing the gpu info firmware.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thermal control is performed by PMFW. What handled in driver is
just whether or not to enable the alert(to driver).
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also the new logics for MP1 SW IRQs disablement/enablement are added.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added missing thermal IRQs disablement on suspend.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User can check and set the enablement of throttling logging and
the interval between each logging.
V2: simplify the sysfs interface(no string parsing)
V3: add proper lock protection on updating throttling_logging_rs.interval
V4: documentation cosmetic per Luben's suggestion
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently this feature is supported on Arcturus only. PMFW will
interrupt driver the first time when thermal throttling happened
and every one second afterwards if the throttling continuing. On
receiving the 1st interrupt, driver logs it the first time. However,
if the throttling continues, the logging will be performed every
minute to avoid log flooding.
V2: simplify the implemention by ratelimited printk
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable this for Arcturus only for now.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fit the latest 54.24.0 PMFW.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There will be no further interrupt without proper ack
for current one.
V2: fix typo to really set ACK bit only
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently pointer pdd is being dereferenced when assigning pointer
dpm and then pdd is being null checked. Fix this by checking if
pdd is null before the dereference of pdd occurs.
Addresses-Coverity: ("Dereference before null check")
Fixes: 32cb59f313 ("drm/amdkfd: Track SDMA utilization per process")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return an error for sysfs and debugfs power interfaces during
gpu reset and suspend. Prevents access to the hw while it may
be in an unusable state.
v2: squash in fix to drop suspend check
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Explicitly set the smallk size to 0 (4k). This is the hw
default, but set it anyway just in case something else
changed it.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 96cb7cf13d.
This change was used for DCN2 bringup and is no longer desired.
In fact it breaks backlight on DCN2 systems.
Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Michael Chiu <Michael.Chiu@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reported-and-tested-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GCC 10 was complaining about how we append data to a buffer using snprintf:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c: In function ‘perf_show’:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:214:3: warning: ‘snprintf’ argument 4 overlaps destination object ‘buf’ [-Wrestrict]
214 | snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This patch fixes the warnings and makes the sysfs code more efficient
by remembering the offset in the buffer between append operations.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV, since the CP_INT_CNTL_RING0 is programed on host side.
The Guest should not program CP_INT_CNTL_RING0 again.
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When determining synchronzied vblank we don't need to compare the stream
with itself
[How]
If comparing same stream, continue to next iteration
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Combine all interface dependencies between driver and fw into a
single header file
- Add FW Versioning to the dmub_cmd.h file
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We hit an issue which driver reallocate a pipe from desktop bottom
pipe to video bottom pipe. In this case, driver need to re-enable
plane.
[how]
Enable plane if container of plane status changed.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to better encapsulate all driver-fw dependencies into a single
file.
[How]
Combine all the headers under inc folder into a single header
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Diagnostics DIO test with eDP not connected is required to run
[How]
Allow Diagnostics test with eDP not connected to skip link detection but
still execute DIO test
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Unit enter to S4, garbage show on screen when do OPTC blank.
[How]
Wait for vblank then do OPTC blank
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are scenarios where no OPP is assigned to an OTG so its value is
0xF which is outside the size of the OPP array causing a potential
driver crash.
[How]
Change the assert to an early return to guard against access. If
there's no OPP assigned already, then OTG will be blank anyways so no
functionality should be lost.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To facilitate DM removing the dependency between dc and the firmware
binary.
[HOW]
Setting the default values to match VBIOS: 64 KB. These values are only
used if meta is absent.
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Link loss currently only retrains and re-enables the stream. This can
cause issues for some sinks.
[How]
When link loss occurs, the link and stream(s) should be completely
disabled and then reenabled.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current implementation is slightly inaccurate and will often
result in truncation/floor operation decrementing an exact
integer output by 1.
Only rounded down output is ever expected, just extract the fp
exponent for this to increase performance and avoid any
truncation issues.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously we used link signal type to get the caps. We should use the
sink signal type
[How]
Use sink signal type instead of link signal type
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The link_status is incorrect cause driver power off eDP when backlight
on. Some eDP panels may show garbage on screen.
[How]
Correct link_status when power off encoder
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Track SDMA usage on a per process basis and report it through sysfs.
The value in the sysfs file indicates the amount of time SDMA has
been in-use by this process since the creation of the process.
This value is in microsecond granularity.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu_i2c_eeprom_init may be invoked twice or more
under sroiv mode, while we don't want to add check
if (!amdgpu_sriov_vf) before we invoke smu_i2c_eeprom_init/fini
each time, so we check if i2c adapter is already added
before we invoke i2c_add_adapter
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't need SRIOV check after we enable SMC msg filter in SMU11
v2: squash in unused variable fix, unused ids
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. enable SMC message filter in SRIOV situation
2. return -EACCESS if msg is blocked from smu_msg_get_index
3. if msg is block, always return 0 from smu_v11_0_send_msg_with_param
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. add smu_11_0_msg_mapping definition
2. add valid info for each SMC message in SRIOV
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since on early phase of bringup, the SMU IP may be not enabled or
supported. Without this, we may hit null pointer dereference on
accessing smu->adev.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Tested-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Warnings in the kernel are generally treated as errors.
The BREAK_TO_DEBUGGER macro is not a critical error or warning, but
rather intended for developer use to help investigate behavior and
sequences for other issues.
We do still make use of DC_ERROR/ASSERT(0) in various places in the
code for things that are genuine issues.
Since most developers don't actually KGDB while debugging the kernel
these essentially would have no value on their own since the KGDB
breakpoint wouldn't trigger - ASSERT(0) was used as a shortcut to get
a stacktrace.
[How]
Turn it into a DRM_DEBUG_DRIVER print instead. We unfortunately lose
the stacktrace, but we still do retain some of the useful debug
information this offers by having at least the function and line
number loggable.
If KGDB is supported in the kernel this will still trigger a real
breakpoint as well.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current codebase makes use of one-element arrays in the following
form:
struct something {
int length;
u8 data[1];
};
struct something *instance;
instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);
but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on. So, replace
the one-element array with a flexible-array member.
Also, make use of the new struct_size() helper to properly calculate the
size of struct SISLANDS_SMC_SWSTATE.
This issue was found with the help of Coccinelle and, audited and fixed
_manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current codebase makes use of one-element arrays in the following
form:
struct something {
int length;
u8 data[1];
};
struct something *instance;
instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);
but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on. So, replace
the one-element array with a flexible-array member.
Also, make use of the new struct_size() helper to properly calculate the
size of struct NISLANDS_SMC_SWSTATE.
This issue was found with the help of Coccinelle and, audited and fixed
_manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just check if it's an APU. The checks for the ppfuncs are
pointless because if we don't have them we can't power up
sdma anyway so we shouldn't even be in this code in the first
place. I'm not sure about the in_gpu_reset check. This
probably needs to be double checked. The fini logic doesn't
match the init logic however with that in_gpu_reset check
in place which seems odd.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if mec2 fw exists rather than checking asic types.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just register the a pointer to the backlight device and use
that. Unifies the DC and non-DC handling.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always use the PCI GART instead. We just have to many cases
where AGP still causes problems. This means a performance
regression for some GPUs, but also a bug fix for some others.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will assist debug in error injection case.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When smu_i2c_eeprom_init is called on the smu resuming process
under sroiv mode, there will be a call trace:
[ 436.377690] dump_stack+0x63/0x85
[ 436.377695] kobject_init+0x77/0x90
[ 436.377704] device_initialize+0x28/0x110
[ 436.377708] device_register+0x12/0x20
[ 436.377756] i2c_register_adapter+0xeb/0x400
[ 436.377763] i2c_add_adapter+0x5a/0x80
[ 436.377951] arcturus_i2c_eeprom_control_init+0x60/0x80 [amdgpu]
[ 436.378123] smu_resume+0xcc/0x110 [amdgpu]
[ 436.378247] amdgpu_device_gpu_recover+0xfb1/0xfc0 [amdgpu]
[ 436.378401] amdgpu_job_timedout+0xf2/0x150 [amdgpu]
[ 436.378414] drm_sched_job_timedout+0x70/0xc0 [amd_sched]
[ 436.378420] ? drm_sched_job_timedout+0x70/0xc0 [amd_sched]
[ 436.378430] process_one_work+0x1fd/0x3f0
[ 436.378438] worker_thread+0x34/0x410
[ 436.378444] kthread+0x121/0x140
[ 436.378451] ? process_one_work+0x3f0/0x3f0
[ 436.378456] ? kthread_create_worker_on_cpu+0x70/0x70
[ 436.378464] ret_from_fork+0x35/0x40
This is because smu_i2c_eeprom is not released on gpu recovering.
Actually, smu_i2c_eeprom_init/fini are only needed under bare
mental mode.
Signed-off-by: Hua Zhang <hua.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
by default, vega20 will use legacy powerplay driver.
in order to maintain the code conveniently in the future,
remove the support of vega20 from swsmu.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the vega20 asic uses legacy powerplay driver by default.
1. cleanup is_support_sw_smu_xgmi() function.
(only use for vega20 xgmi pstate check)
2. by default, the vega20 set xgmi pstate by legacy powerplay routine.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change memory training init and finit a common function, as it only have
software behavior do not relay on the IP version of PSP.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dal side nv12 wa has a lot of side effects.
KMD side wa is used, so this should be remove.
[How]
Removed wa from dal side.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the correct value to immediate flip required field.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change removes internal rounding in dml_log2 function.
Dml_log2 is expected to return a float output. In case an int is needed
dml will floor the output on it's own.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Region 4 is non cacheable and slower than using cache window 4.
[How]
Check the firmware version to determine how we should program the
base address and memory windows.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In order to switch over the inbox from region4 to cw4 we need to know if
the firmware is capable of properly invalidating the cache before
reading the commands.
Easiest way is to just check the firmware version, but we don't have the
helper macros or a way for the dmub_srv to know what version it is.
[How]
Add a new fw_version field to the creation parameters that driver can
optional pass in. Assumes a version of 0x00000000 is invalid.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently we're copying the entire bios image into vbios. Loading time
for FW with entire bios(54272 bytes) is 105138us. By copying only the
sections of bios we're using(4436 bytes), loading time drops to 104326us
which saves us 812us.
[HOW]
ROM header, master data table, and all data tables will be packed in
contiguous manner. The offsets for the data tables are remapped to their
newly packed location.
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DP link layer CTS specs updated to change the test parameters in test
4.2.1.1.
Before it requires source to delay 400us on aux no reply.
With the specs updates Errata5, it requires source to delay 3.2ms
(based on LTTPR aux timeout)
This causes our test to fail after updating with the latest test
equipment firmware.
[how]
the change is to allow LTTPR 3.2ms aux timeout delay by default.
And only set to 400us if LTTPR is not present.
Before this piece of logic is interwined with LTTPR support.
Now we will default to 3.2ms aux timeout even if LTTPR support is not
enabled by driver.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Due to packing of abm_config_table, memory addresses aren't aligned to
32 bit boundary dmcub prefers. Therefore when using pointers to this
structure, it's possible that dmcub will automatically align the data
read from that address, yielding incorrect values.
[How]
Instead of packing 1 byte boundary, explicitly pack values to 4 byte
boundary. Since there is a dependency on the existing iram table
structure on driver side, we must copy to a second structure, which is
aligned correctly, before passing to fw.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian Koenig pointed out a code duplication related to bit swap in
case of big-endian manipulation. This commit adds a helper for handling
this verification and reduces the requirement of replicate some part of
the code.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If bss_data_size is 0 then we shouldn't be passing down fw_bss_data into
the DMUB service since the region isn't really "valid."
[How]
Pass NULL instead if the size is 0.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
New unified firmware binary with only inst const still passes down
fw_bss_data != NULL and params->bss_data_size == 0 from DM.
This leads it into the legacy path causing firmware state allocation to
be too small.
[How]
Check bss_data_size as well.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Failing validation when building scaling parameters causes corruption to
occur due to pipe splitting with smaller pixel widths than HW supports.
This needs to fail silently for now to hide the corruption until the
corruption itself can be fixed.
[HOW]
Do not fail validation if building scaling params fails.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Remove dm_write_persistent_data and dm_read_persistent_data as
persistence should be handled in DM.
[How]
Remove functions. Move read/write calls into DM layer while maintaining
logic.
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's a fix for panel brighness on Lenovo X13 Yoga devices and a fix for
-Wformat warnings on architectures where atomic-64 counters are not of
type unsigned long long.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAl7OHdgACgkQaA3BHVML
eiOhzwgAom+GR5PrDEpLdqdlmBGPgMoefyDlUZMLk22eaPlYaAQxSbyMjBogPu4Q
7Xw1tHTMrErAOMi/SwumoDfGZ/B/WfjzQuBtobAcPZLd5QaV5PioPFgF28yl17oc
/ykob8DeyOa9tD8HnZD6ZZKTFCOzwjhqWEW//w523fiwFc965l/BoHDq0i11Ze8g
nJ7iDU9eCOmS28Loozbttx0MBDTi/ZXF5LLmioL9N4V+OH+4LMkHXn1ZrQ1TqbBm
ZuiRw7dupUAu6PIAAWxjbwmiVBksU8iS+GKwuLQ9He1tjybC2UZXu02uzzgROj/h
00paLMLlmqtp9JkKvapAGGyW65967Q==
=ldcO
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2020-05-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull (less than what git shortlog provides):
There's a fix for panel brighness on Lenovo X13 Yoga devices and a fix for
-Wformat warnings on architectures where atomic-64 counters are not of
type unsigned long long.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527080123.GA8186@linux-uq9g
[Why]
If VUPDATE_END is before VUPDATE_START the delay calculated can become
very large, causing a soft hang.
[How]
Take the absolute value of the difference between START and END.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_cursor_position already handles the case where the cursor has
negative off-screen coordinates by not setting
dc_cursor_position.enabled.
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 626bf90fe0 ("drm/amd/display: add basic atomic check for cursor plane")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the origin design will use varible of "attr->states" to save node
supported states on current gpu device, but for multi gpu device, when
probe second gpu device, the driver will check attribute node states
from previous gpu device wthether to create attribute node.
it will cause other gpu device create attribute node faild.
1. add member attr_list into amdgpu_device to link supported device attribute node.
2. add new structure "struct amdgpu_device_attr_entry{}" to track device attribute state.
3. drop member "states" from amdgpu_device_attr.
v2:
1. move "attr_list" into amdgpu_pm and rename to "pm_attr_list".
2. refine create & remove device node functions parameter.
fix:
drm/amdgpu: optimize amdgpu device attribute code
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
nouveau was calling the fbdev API which has issues with modules
and built-ins. Call the correct API.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Fixes: 2dd4d163cd ("drm/nouveau: remove open-coded version of remove_conflicting_pci_framebuffers()")
Link: https://lore.kernel.org/lkml/21b52c28-3ace-cd13-d8ce-f38f2c6b2a96@infradead.org/T/#u
Signed-off-by: Dave Airlie <airlied@redhat.com>
On some architectures like ppc64le and aarch64, compiling with
-Wformat=1 will throw the following warnings:
In file included from drivers/gpu/drm/drm_vblank.c:33:
drivers/gpu/drm/drm_vblank.c: In function 'drm_update_vblank_count':
drivers/gpu/drm/drm_vblank.c:273:16: warning: format '%llu' expects
argument of type 'long long unsigned int', but argument 4 has type
'long int' [-Wformat=]
DRM_DEBUG_VBL("updating vblank count on crtc %u:"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/drm/drm_print.h:407:22: note: in definition of macro
'DRM_DEBUG_VBL'
drm_dbg(DRM_UT_VBL, fmt, ##__VA_ARGS__)
^~~
drivers/gpu/drm/drm_vblank.c:274:22: note: format string is defined here
" current=%llu, diff=%u, hw=%u hw_last=%u\n",
~~~^
%lu
So, fix that with a typecast.
Co-developed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200521204647.2578479-1-lyude@redhat.com
This fixes an intermittent bug where a root PD clear operation still in
progress could overwrite a PDE update done by the CPU, resulting in a
VM fault.
Fixes: 108b4d928c ("drm/amd/amdgpu: Update VM function pointer")
Reported-by: Jay Cornwall <Jay.Cornwall@amd.com>
Tested-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously we used the s3 codepath for gpu reset. This can lead to issues in
certain case where we end of waiting for fences which will never come (because
parts of the hw are off due to gpu reset) and we end up waiting forever causing
a deadlock.
[How]
Handle GPU reset separately from normal s3 case. We essentially need to redo
everything we do in s3, but avoid any drm calls.
For GPU reset case
suspend:
-Acquire DC lock
-Cache current dc_state
-Commit 0 stream/planes to dc (this puts dc into a state where it can be
powered off)
-Disable interrupts
resume
-Edit cached state to force full update
-Commit cached state from suspend
-Build stream and plane updates from the cached state
-Commit stream/plane updates
-Enable interrupts
-Release DC lock
v2:
-Formatting
-Release dc_state
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some APU flags to simplify handling of different APU
variants. It's easier to understand the special cases
if we use names flags rather than checking device ids and
silicon revisions.
v2: rebase on latest code
Acked-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Problem description]
1. Boot up picasso platform, launches desktop, Don't do anything (APU enter into "gfxoff" state)
2. Remote login to platform using SSH, then type the command line:
sudo su -c "echo manual > /sys/class/drm/card0/device/power_dpm_force_performance_level"
sudo su -c "echo 2 > /sys/class/drm/card0/device/pp_dpm_sclk" (fix SCLK to 1400MHz)
3. Move the mouse around in Window
4. Phenomenon : The screen frozen
Tester will switch sclk level during glmark2 run time.
APU will enter "gfxoff" state intermittently during glmark2 run time.
The system got hanged if fix GFXCLK to 1400MHz when APU is in "gfxoff"
state.
[Debug]
1. Fix SCLK to X MHz
1400: screen frozen, screen black, then OS will reboot.
1300: screen frozen.
1200: screen frozen, screen black.
1100: screen frozen, screen black, then OS will reboot.
1000: screen frozen, screen black.
900: screen frozen, screen black, then OS will reboot.
800: Situation Nomal, issue disappear.
700: Situation Nomal, issue disappear.
2. SBIOS setting: AMD CBS --> SMU Debug Options -->SMU Debug --> "GFX DLDO Psm Margin Control":
50 : Situation Nomal, issue disappear.
45 : Situation Nomal, issue disappear.
40 : Situation Nomal, issue disappear.
35 : Situation Nomal, issue disappear.
30 : screen black.
25 : screen frozen, then blurred screen.
20 : screen frozen.
15 : screen black.
10 : screen frozen.
5 : screen frozen, then blurred screen.
3. Disable GFXOFF feature
Situation Nomal, issue disappear.
[Why]
Through a period of time debugging with Sys Eng team and SMU team, Sys
Eng team said this is voltage/frequency marginal issue not a F/W or H/W
bug. This experiment proves that default targetPsm [for f=1400MHz] is
not sufficient when GFXOFF is enabled on Picasso.
SMU team think it is an odd test conditions to force sclk="1400MHz" when
GPU is in "gfxoff" state，then wake up the GFX. SCLK should be in the
"lowest frequency" when gfxoff.
[How]
Disable gfxoff when setting manual mode.
Enable gfxoff when setting other mode(exiting manual mode) again.
By the way, from the user point of view, now that user switch to manual
mode and force SCLK Frequency, he don't want SCLK be controlled by
workload.It becomes meaningless to "switch to manual mode" if APU enter "gfxoff"
due to lack of workload at this point.
Tips: Same issue observed on Raven.
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix typos that prevented them from showing up.
v2: switch other files in addition to pp_clk_voltage
Fixes: 4e01847c38 ("drm/amdgpu: optimize amdgpu device attribute code")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1150
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
We need to get the silicon revision id before we parse
the firmware in order to load the correct gpu info firmware
for raven2 variants.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1103
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move it into the fw_info function since it's logically part
of the same functionality.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- HD audio fixes on recent systems
- vGPU detection (fail probe if we're on one, for now)
- Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it)
- SVM improvements/fixes
- NVIDIA format modifier support
- Misc other fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv6DcRFMDVEftdL7LxNtxuSQQ=qnfqdHXO0K=BmJ8Q2-+g@mail.gmail.com
-----BEGIN PGP SIGNATURE-----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=qbjB
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.8' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 5.8
This include dpi pin mode swap, config mipi_tx current and impedance,
and some fixup.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200521014612.17175-1-chunkuang.hu@kernel.org
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When calling OpenCL clEnqueueSVMMigrateMem() on a region of memory that
is backed by pte_none() or zero pages, migrate_vma_setup() will fill the
source PFN array with an entry indicating the source page is zero.
Use this to optimize migration to device private memory by allocating
GPU memory and zero filling it instead of failing to migrate the page.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In nouveau_dmem_init(), a number of struct nouveau_dmem_chunk are allocated
and put on the dmem->chunk_empty list. Then in nouveau_dmem_pages_alloc(),
a nouveau_dmem_chunk is removed from the list and GPU memory is allocated.
However, the nouveau_dmem_chunk is never removed from the chunk_empty
list nor placed on the chunk_free or chunk_full lists. This results
in only one chunk ever being actually used (2MB) and quickly leads to
migration to device private memory failures.
Fix this by having just one list of free device private pages and if no
pages are free, allocate a chunk of device private pages and GPU memory.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Currently, the nv50_mstc_mode_valid() function is happy to take any and
all modes, even the ones we can't actually support sometimes like
interlaced modes.
Luckily, the only difference between the mode validation that needs to
be performed for MST vs. SST is that eventually we'll need to check the
minimum PBN against the MSTB's full PBN capabilities (remember-we don't
care about the current bw state here). Otherwise, all of the other code
can be shared.
So, we move all of the common mode validation in
nouveau_connector_mode_valid() into a separate helper,
nv50_dp_mode_valid(), and use that from both nv50_mstc_mode_valid() and
nouveau_connector_mode_valid(). Note that we allow for returning the
calculated clock that nv50_dp_mode_valid() came up with, since we'll
eventually want to use that for PBN calculation in
nv50_mstc_mode_valid().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This just limits the BPC for MST connectors to a maximum of 8 from
nv50_mstc_get_modes(), instead of doing so during
nv50_msto_atomic_check(). This doesn't introduce any functional changes
yet (other then userspace now lying about the max bpc, but we can't
support that yet anyway so meh). But, we'll need this in a moment so
that we can share mode validation between SST and MST which will fix
some real world issues.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We advertise being able to set interlaced modes, so let's actually make
sure to do that. Otherwise, we'll end up hanging the display engine due
to trying to set a mode with timings adjusted for interlacing without
telling the hardware it's actually an interlaced mode.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Right now, we make the mistake of allowing interlacing on all
connectors. Nvidia hardware does not always support interlacing with DP
though, so we need to make sure that we don't allow interlaced modes to
be set in such situations as otherwise we'll end up accidentally hanging
the display HW.
This fixes some hangs with Turing, which would be caused by attempting
to set an interlaced mode on hardware that doesn't support it. This
patch likely fixes other hardware hanging in the same way as well.
Note that we say we probe PIOR caps, but they don't actually have any
interlacing caps. So, the get_caps() function for PIORs just sets
interlacing support to true.
Changes since v1:
* Actually probe caps correctly this time, both on EVO and NVDisplay.
Changes since v2:
* Fix probing for < GF119
* Use vfunc table, in prep for adding more caps in the future.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We'll need the core channel initialized and ready by the time that we
start creating modesetting objects, so that we can call the
NV507D_GET_CAPABILITIES method to make the hardware expose it's
modesetting capabilities for later probing.
So, when loading the driver prepare the core channel from within
nouveau_display_create(). Everywhere else, we initialize the core
channel during resume.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since the commit 742db30c4e ("drm/nouveau: Add HD-audio component
notifier support"), the nouveau driver notifies and pokes the HD-audio
HPD and ELD via audio component, but this seems broken. The culprit
is the naive assumption that crtc->index corresponds to the HDA pin.
Actually this rather corresponds to the MST dev_id (alias "pipe" in
the audio component framework) while the actual port number is given
from the output ior id number.
This patch corrects the assignment of port and dev_id arguments in the
audio component ops to recover from the HDMI/DP audio regression.
Fixes: 742db30c4e ("drm/nouveau: Add HD-audio component notifier support")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207223
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Using ENODEV as this prevents probe failed errors in dmesg.
v2: move check further down
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fixes warnings on GPUs with smaller a smaller mmio region like vGPUs.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Replace nouveau_pr3_present() in favor of a more generic one,
pci_pr3_present().
Also the presence of upstream bridge _PR3 doesn't need to go hand in
hand with device's _DSM, so check _PR3 before _DSM.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fixes coccicheck warning:
drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c:103:23-30: WARNING opportunity for kmemdup
drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c:113:22-29: WARNING opportunity for kmemdup
Fixes: 22dcda45a3 ("drm/nouveau/acr: implement new subdev to replace "secure boot"")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The variable ret is being initialized with a value that is never
read and it is being updated later with a new value. The initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When memory is migrated to the GPU, it is likely to be accessed by GPU
code soon afterwards. Instead of waiting for a GPU fault, map the
migrated memory into the GPU page tables with the same access permissions
as the source CPU page table entries. This preserves copy on write
semantics.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Allow setting the block layout of a nouveau FB
object using DRM format modifiers. When
specified, the format modifier block layout and
kind overrides the GEM buffer's implicit layout
and kind. The specified format modifier is
validated against the list of modifiers supported
by the target display hardware.
v2: Used Tesla family instead of NV50 chipset compare
v4: Do not cache kind, tile_mode in nouveau_framebuffer
v5: Resolved against nouveau_framebuffer cleanup
Signed-off-by: James Jones <jajones@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Make sure framebuffer dimensions and tiling
parameters will not result in accesses beyond the
end of the GEM buffer they are bound to.
v3: Return EINVAL when creating FB against BO with
unsupported tiling
v5: Resolved against nouveau_framebuffer cleanup
Signed-off-by: James Jones <jajones@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Advertise support for the full list of format
modifiers supported by each class of NVIDIA
desktop GPU display hardware. Stash the array
of modifiers in the nouveau_display struct for
use when validating userspace framebuffer
creation requests, which will be supportd in
a subsequent change.
Signed-off-by: James Jones <jajones@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
After its cleanup, struct nouveau_framebuffer is only a wrapper around
struct drm_framebuffer. Use the latter directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The buffer object stored in nvbo is also available GEM object in obj[0]
of struct drm_framebuffer. Therefore remove nvbo in favor obj[0] and
replace all references accordingly. This may require an additional cast.
With this change we can already replace nouveau_user_framebuffer_destroy()
and nouveau_user_framebuffer_create_handle() with generic GEM helpers.
Calls to nouveau_framebuffer_new() receive a GEM object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The vma field of struct nouveau_framebuffer is a special field for the
the accelerated fbdev console. Hence there's at most one single instance
for the active console. Moving it into struct nouveau_fbdev makes struct
nouveau_framebuffer slightly smaller and brings it closer to struct
drm_framebuffer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The $(srctree) addition a while back busted building the out-of-tree
version of the module, and I've been hacking it up ever since.
This allows us to work around the issue.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Try to resize BAR0 to let CPU access all of VRAM on Navi. Syncs
code with previous gfx generations from commit d6895ad39f
("drm/amdgpu: resize VRAM BAR for CPU access v6").
Signed-off-by: Alan Swanson <reiver@improbability.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not implemented yet so just drop it so the sysfs
pcie bw file returns an appropriate error instead of
garbage.
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-By: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Initialize the counters to 0 in case the callback
fails to initialize them.
2. The counters don't exist on APUs so return an error
for them.
3. Return an error if the callback doesn't exist.
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-By: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In free memory of gpu path, remove bo from validate_list to make sure
restore worker don't access the BO any more, then unregister bo MMU
interval notifier. Otherwise, the restore worker will crash in the
middle of validating BO user pages if MMU interval notifer is gone.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This loop in the error handling code should start a "i - 1" and end at
"i == 0". Currently it starts a "i" and ends at "i == 1". The result
is that it removes one attribute that wasn't created yet, and leaks the
zeroeth attribute.
Fixes: 4e01847c38 ("drm/amdgpu: optimize amdgpu device attribute code")
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current codebase makes use of one-element arrays in the following
form:
struct something {
int length;
u8 data[1];
};
struct something *instance;
instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);
but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on. So, replace
the one-element array with a flexible-array member.
Also, make use of the new struct_size() helper to properly calculate the
size of struct smu10_voltage_dependency_table.
This issue was found with the help of Coccinelle and, audited and fixed
_manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When disconnect fe from be, something such as unstable clock may cause
garbage occurs.
[How]
Send set avmute at the beginning of disable stream and send reset avmute
at the end of enable stream.
Signed-off-by: Jinze Xu <jinze.xu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When "max bpc" is set to enable deep color, some modes are removed from
the list if they fail validation on max bpc. These modes should be kept
if they validates fine with lower bpc.
[How]
- Retry with lower bpc in mode validation.
- Same in atomic commit to apply working bpc, not necessarily max bpc.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Save the correct num vmid during resource creation and fix RN gpuvm
level from 1 to 16 vmid entries.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The minimum plane size we can support in DML is 16x16. If we try to pass
a 16x16 plane with dynamic pipe split then validation will fail since it
tries to split it into two pipes, each 8x8.
Some userspace doesn't check that the commit fails and because the
commit fails the old state is retained, resulting in corruption.
[How]
Add a workaround to avoid pipe split if any plane is 16x16 or smaller.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We dropped the delay after changed the cursor functions locking the
entire pipe to locking just the CURSOR registers to fix page flip
stuttering - this introduced cursor stuttering instead, and an underflow
issue.
The cursor update can be delayed indefinitely if the cursor update
repeatedly happens right around VUPDATE.
The underflow issue can happen if we do a viewport update on a pipe
on the same frame where a cursor update happens around VUPDATE - the
old cursor registers are retained which can be in an invalid position.
This can cause a pipe hang and indefinite underflow.
[How]
The complex, ideal solution to the problem would be a software
triple buffering mechanism from the DM layer to program only one cursor
update per frame just before VUPDATE.
The simple workaround until we have that infrastructure in place is
this change - bring back the delay until VUPDATE before locking, but
with some corrections to the calculations.
This didn't work for all timings before because the calculation for
VUPDATE was wrong - it was using the offset from VSTARTUP instead and
didn't correctly handle the case where VUPDATE could be in the back
porch.
Add a new hardware sequencer function to use the existing helper to
calculate the real VUPDATE start and VUPDATE end - VUPDATE can last
multiple lines after all.
Change the udelay to incorporate the width of VUPDATE as well.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DP training sequence to set SCRAMBLING_DISABLE bit properly based on
training pattern - per DP Spec.
[How]
Update dpcd_pattern.v1_4.SCRAMBLING_DISABLE with 1 for TPS1, TPS2, TPS3,
but not for TPS4.
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During the rework for removing the FPU issues, I found the following
warning:
[..] dml_common_defs.o: warning: objtool: dml_round()+0x9: FPU
instruction outside of kernel_fpu_{begin,end}()
This file has a single function that does not need to be in a specific
file. This commit drop dml_common_defs file, and move dml_round function
to dml_inline_defs.
CC: Christian König <christian.koenig@amd.com>
CC: Alexander Deucher <Alexander.Deucher@amd.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Tony Cheng <tony.cheng@amd.com>
CC: Harry Wentland <hwentlan@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current odm/mpc combine logic to detect which pipes need to split
logically is flawed leading to incorrect pipe merge/split operations
being taken.
This change cleans up the logic and fixes the logical errors.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Assigning a different DSC resource than the one previosly used is
currently not handled. This causes black screen on mode change when more
than one monitor is connected on some ASICs.
[how]
- Acquire the previously used DSC if available
- Make sure re-program is triggered if new DSC is used
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only ras supportted need to set MP1 state to prepare for unload before
reloading SMU FW.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the PCI bus number retrieved by PCI_BUS_NUM(pdev->devfn)
is wrong.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under xgmi setup,some sysfs fail to create for the second time of kmd
driver loading. It's due to sysfs nodes are not removed appropriately
in the last unlod time.
Changes of this patch:
1. remove sysfs for dev_attr_xgmi_error
2. remove sysfs_link adev->dev->kobj with target name.
And it only needs to be removed once for a xgmi setup
3. remove sysfs_link hive->kobj with target name
In amdgpu_xgmi_remove_device:
1. amdgpu_xgmi_sysfs_rem_dev_info needs to be run per device
2. amdgpu_xgmi_sysfs_destroy needs to be run on the last node of
device.
v2: initialize array with memset
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The prompts will contain pci address(segment/bus/port/function),
severity(warn or error) and some keywords(GPU, amdgpu). Also this
address the issue that pci bus retrieved by PCI_BUS_NUM(adev->pdev->devfn)
is wrong.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Testing on a Polaris11 gpu with DCE-11.2 suggests that it
seems to work fine there, so optimistically enable it for
DCE-11 and later.
v2: drop DCE 11.0 hunk. Carrizo (DCE 11.0) has a HW bug where FP16
scaling doesn't work. The upscale and downscale factors were
intended to block those FP16 cases and reject the commit but
nobody ever added those to atomic check. Once those are added
to atomic check, this can be re-enabled.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose support for DRM_FORMAT_ABGR16161616F and
DRM_FORMAT_XBGR16161616F to the DRM core, complementing
the already existing xRGB ordered fp16 formats.
These are especially useful for creating presentable
swapchains in Vulkan for VK_FORMAT_R16G16B16A16_SFLOAT.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SCRATCH2 is used to keep decode wptr as a workaround
which fix a hardware DPG decode wptr update bug for
vcn2.5 beforehand.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove JPEG_ENC_MASK from clock ungating since MJPEG encoder
hasn't been support yet.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
during ras recovery block smu access via smi
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return statements in functions returning bool should use
true/false instead of 1/0.
drivers/gpu/drm/amd/amdkfd/kfd_int_process_v9.c:40:9-10:
WARNING: return of 0/1 in function 'event_interrupt_isr_v9' with return type bool
Generated by: scripts/coccinelle/misc/boolreturn.cocci
Signed-off-by: Aishwarya Ramakrishnan <aishwaryarj100@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
One call was forcing stutter on instead of looking at the debug option.
Ensure we always check the debug option unless we want to force stutter
off.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
At bringup we want to be able to disable various power features.
[How]
These features are already exposed as dc_debug_options and exercised
on other OSes. Create a new dc_debug_mask module parameter and expose
relevant bits, in particular
* DC_DISABLE_PIPE_SPLIT
* DC_DISABLE_STUTTER
* DC_DISABLE_DSC
* DC_DISABLE_CLOCK_GATING
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the amdgpu device attribute node will be created accordding to sriov vf
mode at runtime.
cleanup unnecessary sriov check in attribute operation function.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- This patch reworks exynos_drm_gem_prime_import_sg_table function,
which checks if the imported buffer has been mapped as contiguous
or not in generic way, and flag a exynos gem buffer type properly
according to the mapped way.
Fixups
- Drop a reference count to in_bridge_node correctly.
- Enable the runtime power management correctly.
. The runtime pm should be enabled before calling compont_add().
Cleanups
- Do not register "by hand" a sysfs file, and use dev_groups instead.
- Drop internal 'pages' array which aren't needed.
- Remove dead-code.
- Correct type casting.
- Drop unnecessary error messages.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJexL+BAAoJEFc4NIkMQxK4Vw8P/17YUGOQZKr+FLnlkakhIK8t
OqYDuNVRtIAxYokS0xWZj2gezQtwjCLCQpnKZyBijtvDA97TdQaAJ7ATT+HNMkVi
N54zTrmC3+N1iWAdH+nvolBLgDIsxUtNtUMQd6iAmNGvEx4iHbL/9+ozsSXwlagt
Sj6rLe1+3quHOGpsIke7/CR7l+AYNPqJT1UC2Hl40GTGaSMeteQK3HJSKLFWMkYw
UkaxLizlqlC1EpMw3GgVkFtt4eYR0d+kkbOKL3P6N/BG3S/yDSq4A5hrK6lSdmwp
1fw/LGzBuK81a4j6r1aEsTTbWuGdE6h2+BzDQPnVeYfnzkbsQ9tOJnjglqWCE3Aw
CXif76lzgLJD/UomAMBgggTwOk49co3X1Evb+pobQyw3Scs9vEPnG7K1aCBzDpFQ
e7BuCmzsSYhHfkRA70mYzyK/pMDl/XbcgR6H9iNd423aF2B6xf7EtmbnoWpO1vDa
2ZjuOI/x4sWzcFguvgNYuS+j1qZcLD/UROQiWnRotgl9Ju2bElHxJ3FqHfAoLON0
WV5xyKvHrsyioczgQ+nllRYVthKeJOq5zBtb0y410r6Si1v/h+qZub1u8xSc4Gzn
NR3I7NXWB7UyW5JuNBu7weByevCuYJRT79siPazh5G66hJxi3fQDk6H69fuK0S5f
RWiF9cFA+IMNxY30VA+Q
=BVSz
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Check imported buffer mapping in generic way
- This patch reworks exynos_drm_gem_prime_import_sg_table function,
which checks if the imported buffer has been mapped as contiguous
or not in generic way, and flag a exynos gem buffer type properly
according to the mapped way.
Fixups
- Drop a reference count to in_bridge_node correctly.
- Enable the runtime power management correctly.
. The runtime pm should be enabled before calling compont_add().
Cleanups
- Do not register "by hand" a sysfs file, and use dev_groups instead.
- Drop internal 'pages' array which aren't needed.
- Remove dead-code.
- Correct type casting.
- Drop unnecessary error messages.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1589952785-24210-1-git-send-email-inki.dae@samsung.com
Eiminate the magic number in array size, there macro defines in
hdmi.h.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This code change is to make code bit more readable.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
If dma_map_sg() merges pages when creating the mapping, only the first
entries will have a valid sg_dma_address() and sg_dma_len(), followed by
entries with sg_dma_len() == 0.
Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Anand K Mistry <amistry@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
UAPI Changes:
- drm/i915: Show per-engine default property values in sysfs
By providing the default values configured into the kernel via sysfs, it
is much more convenient for userspace to restore those sane defaults, or
at least know what are considered good baseline. This is useful, for
example, to cleanup after any failed userspace prior to commencing new
jobs.
Cross-subsystem Changes:
- video/hdmi: Add Unpack only function for DRM infoframe
- Includes pull request gvt-next-2020-05-12
Driver Changes:
- Restore Cherryview back to full-ppgtt (Chris, Mika)
- Document locking guidelines for i915 (Chris, Daniel, Joonas)
- Fix GitLab #1746: Handle idling during i915_gem_evict_something busy loops (Chris)
- Display WA #1105: Require linear fb stride to be multiple of 512 bytes on
gen9/glk (Ville)
- Add Wa_14010685332 for ICP/ICL (Matt R)
- Restrict w/a 1607087056 for EHL/JSL (Swathi)
- Fix interrupt handling for DP AUX transactions on Tigerlake (Imre)
- Revert "drm/i915/tgl: Include ro parts of l3 to invalidate" (Mika)
- Fix HDC pipeline flush hardware bit on Gen12 (Mika)
- Flush L3 when flushing render on Gen12 (Mika)
- Invalidate aux table entries forcibly between BB on Gen12 (Mika)
- Add aux table invalidate for all engines on Gen12 (Mika)
- Force pte cacheline to main memory Gen8+ (Mika)
- Add and enable TGL+ SAGV support (Stanislav)
- Implement vm_ops->access on i915 mmaps for GDB (Chris, Kristian)
- Replace zero-length array with flexible-array (Gustavo)
- Improve batch buffer pool effectiveness to mitigate soft-rc6 hit (Chris)
- Remove wait priority boosting (Chris)
- Keep driver module referenced when PMU is active (Chris)
- Sanitize RPS interrupts upon resume (Chris)
- Extend pcode read timeout to 20 ms (Chris)
- Wait for ACT sent before enabling MST pipe (Ville)
- Extend support to async relocations to SNB (Chris)
- Remove CNL pre-prod workarounds (Ville)
- Don't enable WaIncreaseLatencyIPCEnabled when IPC is disabled (Sultan)
- Record the active CCID from before reset (Chris)
- Mark concurrent submissions with a weak-dependency (Chris)
- Peel dma-fence-chains for await to allow engine-to-engine sync (Lionel)
- Prevent using semaphores to chain up to external fences (Chris)
- Fix GLK watermark calculations (Ville)
- Emit await(batch) before MI_BB_START (Chris)
- Reset execlists registers before HWSP (Chris)
- Drop no-semaphore boosting in favor of fast timeslicing (Chris)
- Fix enabled infoframe states of lspcon (Gwan-gyeong)
- Program DP SDPs on pipe updates (Gwan-gyeong)
- Stop sending DP SDPs on ddi disable (Gwan-gyeong)
- Store CS timestamp frequency in Hz (Ville)
- Remove unused HAS_FWTABLE macro (Pascal)
- Use batchbuffer chaining for relocations to save ring space (Chris)
- Try different engines for relocs if MI ops not supported (Chris, Tvrtko)
- Lazily acquire the device wakeref for freeing objects (Chris)
- Streamline display code arithmetics around rounding etc. (Ville)
- Use bw state for per crtc SAGV evaluation (Stanislav)
- Track active_pipes in bw_state (Stanislav)
- Nuke mode.vrefresh usage (Ville)
- Warn if the FBC is still writing to stolen on removal (Chris)
- Added new PCode commands prepping for QGV rescricting (Stansilav)
- Stop holding onto the pinned_default_state (Chris)
- Propagate error from completed fences (Chris)
- Ignore submit-fences on the same timeline (Chris)
- Pull waiting on an external dma-fence into its routine (Chris)
- Replace the hardcoded I915_FENCE_TIMEOUT with Kconfig (Chris)
- Mark up the racy read of execlists->context_tag (Chris)
- Tidy up the return handling for completed dma-fences (Chris)
- Introduce skl_plane_wm_level accessor (Stanislav)
- Extract SKL SAGV checking (Stanislav)
- Make active_pipes check skl specific (Stanislav)
- Suspend tasklets before resume sanitization (Chris)
- Remove redundant exec_fence (Chris)
- Mark the addition of the initial-breadcrumb in the request (Chris)
- Transfer old virtual breadcrumbs to irq_worker (Chris)
- Read the DP SDPs from the video DIP (Gwan-gyeong)
- Program DP SDPs with computed configs (Gwan-gyeong)
- Add state readout for DP VSC and DP HDR Metadata Infoframe SDP
(Gwan-gyeong)
- Add compute routine for DP PSR VSC SDP (Gwan-gyeong)
- Use new DP VSC SDP compute routine on PSR (Gwan-gyeong)
- Restrict qgv points which don't have enough bandwidth. (Stanislav)
- Nuke pointless div by 64bit (Ville)
- Static checker code fixes (Nathan, Mika, Chris)
- Add logging function for DP VSC SDP (Gwan-gyeong)
- Include HDMI DRM infoframe, DP HDR metadata and DP VSC SDP in the
crtc state dump (Gwan-gyeong)
- Make timeslicing explicit engine property (Chris, Tvrtko)
- Selftest and debugging improvements (Chris)
- Align variable names with BSpec (Ville)
- Tidy up gen8+ breadcrumb emission code (Chris)
- Turn intel_digital_port_connected() in a vfunc (Ville)
- Use stashed away hpd isr bits in intel_digital_port_connected() (Ville)
- Extract i915_cs_timestamp_{ns_to_ticks,tick_to_ns}() (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515160703.GA19043@jlahtine-desk.ger.corp.intel.com
Make sure to select the port's AUX power domain while holding the TC
port lock. The domain depends on the port's current TC mode, which may
get changed under us if we're not holding the lock.
This was left out from
commit 8c10e22626 ("drm/i915: Keep the TypeC port mode fixed for detect/AUX transfers")
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514204553.27193-1-imre.deak@intel.com
(cherry picked from commit ae9b6cfe13)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When CONFIG_DRM_I915_DEBUG_GEM is not set, clang warns:
drivers/gpu/drm/i915/gvt/scheduler.c:884:1: warning: function
'check_shadow_context_ppgtt' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
check_shadow_context_ppgtt(struct execlist_ring_context *c, struct
intel_vgpu_mm *m)
^
1 warning generated.
This warning is similar to -Wunused-function but rather than warning
that the function is completely unused, it warns that it is used in some
expression within the file but that expression will be evaluated to a
constant or be optimized away in the final assembly, essentially making
it appeared used but really isn't. Usually, this happens when a function
or variable is only used in sizeof, where it will appear to be used but
will be evaluated at compile time and not be required to be emitted.
In this case, the function is only used in GEM_BUG_ON, which is defined
as BUILD_BUG_ON_INVALID, which intentionally follows this pattern. To
fix this warning, add __maybe_unused to make it clear that this is
intentional depending on the configuration.
Fixes: bec3df930f ("drm/i915/gvt: Support PPGTT table load command")
Link: https://github.com/ClangBuiltLinux/linux/issues/1027
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200516023545.3332334-1-natechancellor@gmail.com
(cherry picked from commit 993fa32eb3)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
After the function is no longer marked 'inline', there
is now a new warning pointing out that the only caller
is inside of an #ifdef:
drivers/gpu/drm/i915/display/intel_panel.c:493:12: warning: 'scale_user_to_hw' defined but not used [-Wunused-function]
493 | static u32 scale_user_to_hw(struct intel_connector *connector,
| ^~~~~~~~~~~~~~~~
Move the function itself into that #ifdef as well.
Fixes: 81b55ef1f4 ("drm/i915: drop a bunch of superfluous inlines")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428213106.3139170-1-arnd@arndb.de
(cherry picked from commit 794bdcf71f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When this flag is set in the CS IB flags, it causes
a memory cache flush of the GFX.
v2:
Move new flag to drm_amdgpu_cs_chunk_ib.flags
Bump up UAPI version
Remove condition on job != null to emit mem_sync
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Compute IBs need this too.
v2: split out version bump
v3: squash in emit frame count fixes
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used to flush and invalidate various caches.
v2: Rename function hook
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
unified amdgpu device attribute node functions:
1. add some helper functions to create amdgpu device attribute node.
2. create device node according to device attr flags on different VF mode.
3. rename some functions name to adapt a new interface.
v2:
1. remove ATTR_STATE_DEAD, ATTR_STATE_ALIVE enum.
2. rename callback function perform to attr_update.
3. modify some variable names
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the swsmu or powerplay(hwmgr) need to handle task according to different VF mode,
this function to help query vf mode.
vf mode:
1. SRIOV_VF_MODE_BARE_METAL: the driver work on host OS (PF)
2. SRIOV_VF_MODE_ONE_VF : the driver work on guest OS with one VF
3. SRIOV_VF_MODE_MULTI_VF : the driver work on guest OS with multi VF
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When GPU got timeout, it would notify an interested part
of an opportunity to dump info before actual GPU reset.
A usermode app would open 'autodump' node under debugfs system
and poll() for readable/writable. When a GPU reset is due,
amdgpu would notify usermode app through wait_queue_head and give
it 10 minutes to dump info.
After usermode app has done its work, this 'autodump' node is closed.
On node closure, amdgpu gets to know the dump is done through
the completion that is triggered in release().
There is no write or read callback because necessary info can be
obtained through dmesg and umr. Messages back and forth between
usermode app and amdgpu are unnecessary.
v2: (1) changed 'registered' to 'app_listening'
(2) add a mutex in open() to prevent race condition
v3 (chk): grab the reset lock to avoid race in autodump_open,
rename debugfs file to amdgpu_autodump,
provide autodump_read as well,
style and code cleanups
v4: add 'bool app_listening' to differentiate situations, so that
the node can be reopened; also, there is no need to wait for
completion when no app is waiting for a dump.
v5: change 'bool app_listening' to 'enum amdgpu_autodump_state'
add 'app_state_mutex' for race conditions:
(1)Only 1 user can open this file node
(2)wait_dump() can only take effect after poll() executed.
(3)eliminated the race condition between release() and
wait_dump()
v6: removed 'enum amdgpu_autodump_state' and 'app_state_mutex'
removed state checking in amdgpu_debugfs_wait_dump
Improve on top of version 3 so that the node can be reopened.
v7: move reinit_completion into open() so that only one user
can open it.
v8: remove complete_all() from amdgpu_debugfs_wait_dump().
Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Platform drivers now have the option to have the platform core create
and remove any needed sysfs attribute files. So take advantage of that
and do not register "by hand" a sysfs file.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
'exynos_dsi_parse_dt()' takes a reference to 'dsi->in_bridge_node'.
This must be released in the error handling path.
In order to do that, add an error handling path and move the
'exynos_dsi_parse_dt()' call from the beginning to the end of the probe
function to ease the error handling path.
This function only sets some variables which are used only in the
'transfer' function.
The call chain is:
.transfer
--> exynos_dsi_host_transfer
--> exynos_dsi_init
--> exynos_dsi_enable_clock (use burst_clk_rate and esc_clk_rate)
--> exynos_dsi_set_pll (use pll_clk_rate)
While at it, also handle cases where 'component_add()' fails.
This patch is similar to commit 70505c2ef9 ("drm/exynos: dsi: Remove bridge node reference in removal")
which fixed the issue in the remove function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Runtime power management is essential for the Exynos Mixer driver
operation. It should be enabled before adding its DRM component, because
in some cases (when deferred probe takes place due to the IOMMU
availability) the DRM driver might be initialized directly from the
Mixer's component_add() call, what results in starting the driver
operation without enabling the runtime power management.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Maybe keep pointer which points to global const string data
in const type is better, make sure not change const data.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Internal pages array and scatter-list for them is not really needed for
anything. FBDev emulation can simply rely on the DMA-mapping framework
to create a proper kernel mapping for the buffer, while all other buffer
use cases don't really need that array at all.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Explicitly check if the imported buffer has been mapped as contiguous in
the DMA address space, what is required by all Exynos DRM CRTC drivers.
While touching this, set buffer flags depending on the availability of
the IOMMU.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The ExynosDRM page fault handler is never used, drm_gem_mmap()
always calls exynos_drm_gem_mmap() function, which perform
complete mapping for the given virtual address-space area.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The function “platform_get_irq” can log an error already.
Thus omit redundant messages for the exception handling in the
calling functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Updated SMC FW version check to determine if XGMI power down control is supported
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable XGMI link power down prior to issuing a XGMI RAS error
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added host to SMU FW cmd to enable/disable XGMI link power down
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable ret is being initializeed with a value that is never read
and it is being updated later with a new value. The initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no need to use amdgpu_mm_wreg_mmio_rlc()
during initialization time because this interface
is only designed for debugfs case to access the
registers which are only permitted by RLCG during
run-time. Therefore, turn back rlcg write for gfx_v10.
If we not turn back it, it will raise amdgpu load failure.
[ 54.904333] amdgpu: SMU driver if version not matched
[ 54.904393] amdgpu: SMU is initialized successfully!
[ 54.905971] [drm] kiq ring mec 2 pipe 1 q 0
[ 55.115416] amdgpu 0000:00:06.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring gfx_0.0.0 test failed (-110)
[ 55.118877] [drm:amdgpu_device_init [amdgpu]] *ERROR* hw_init of IP block <gfx_v10_0> failed -110
[ 55.126587] amdgpu 0000:00:06.0: amdgpu_device_ip_init failed
[ 55.133466] amdgpu 0000:00:06.0: Fatal error during GPU init
Signed-off-by: Yintian Tao <yttao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'ctxid' is used to distinguish different events raised from SMC.
0x3 and 0x4 are for AC and DC power mode.
V2: update the way to retrieve the ctxid and change the log level
to debug
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To prevent further damage.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Normally this(SW CTF) should not happen. And by doing graceful
shutdown we can prevent further damage.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull the code to do the CS timestamp ns<->ticks conversion into
helpers and use them all over.
The check in i915_perf_noa_delay_set() seems a bit dubious,
so we switch it to do what I assume it wanted to do all along
(ie. make sure the resulting delay in CS timestamp ticks
doesn't exceed 32bits)?
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302143943.32676-5-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
kHz isn't accurate enough for storing the CS timestamp
frequency on some of the platforms. Store the value
in Hz instead.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302143943.32676-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
According to BSpec 53998, we should try to
restrict qgv points, which can't provide
enough bandwidth for desired display configuration.
Currently we are just comparing against all of
those and take minimum(worst case).
v2: Fixed wrong PCode reply mask, removed hardcoded
values.
v3: Forbid simultaneous legacy SAGV PCode requests and
restricting qgv points. Put the actual restriction
to commit function, added serialization(thanks to Ville)
to prevent commit being applied out of order in case of
nonblocking and/or nomodeset commits.
v4:
- Minor code refactoring, fixed few typos(thanks to James Ausmus)
- Change the naming of qgv point
masking/unmasking functions(James Ausmus).
- Simplify the masking/unmasking operation itself,
as we don't need to mask only single point per request(James Ausmus)
- Reject and stick to highest bandwidth point if SAGV
can't be enabled(BSpec)
v5:
- Add new mailbox reply codes, which seems to happen during boot
time for TGL and indicate that QGV setting is not yet available.
v6:
- Increase number of supported QGV points to be in sync with BSpec.
v7: - Rebased and resolved conflict to fix build failure.
- Fix NUM_QGV_POINTS to 8 and moved that to header file(James Ausmus)
v8: - Don't report an error if we can't restrict qgv points, as SAGV
can be disabled by BIOS, which is completely legal. So don't
make CI panic. Instead if we detect that there is only 1 QGV
point accessible just analyze if we can fit the required bandwidth
requirements, but no need in restricting.
v9: - Fix wrong QGV transition if we have 0 planes and no SAGV
simultaneously.
v10: - Fix CDCLK corruption, because of global state getting serialized
without modeset, which caused copying of non-calculated cdclk
to be copied to dev_priv(thanks to Ville for the hint).
v11: - Remove unneeded headers and spaces(Matthew Roper)
- Remove unneeded intel_qgv_info qi struct from bw check and zero
out the needed one(Matthew Roper)
- Changed QGV error message to have more clear meaning(Matthew Roper)
- Use state->modeset_set instead of any_ms(Matthew Roper)
- Moved NUM_SAGV_POINTS from i915_reg.h to i915_drv.h where it's used
- Keep using crtc_state->hw.active instead of .enable(Matthew Roper)
- Moved unrelated changes to other patch(using latency as parameter
for plane wm calculation, moved to SAGV refactoring patch)
v12: - Fix rebase conflict with own temporary SAGV/QGV fix.
- Remove unnecessary mask being zero check when unmasking
qgv points as this is completely legal(Matt Roper)
- Check if we are setting the same mask as already being set
in hardware to prevent error from PCode.
- Fix error message when restricting/unrestricting qgv points
to "mask/unmask" which sounds more accurate(Matt Roper)
- Move sagv status setting to icl_get_bw_info from atomic check
as this should be calculated only once.(Matt Roper)
- Edited comments for the case when we can't enable SAGV and
use only 1 QGV point with highest bandwidth to be more
understandable.(Matt Roper)
v13: - Moved max_data_rate in bw check to closer scope(Ville Syrjälä)
- Changed comment for zero new_mask in qgv points masking function
to better reflect reality(Ville Syrjälä)
- Simplified bit mask operation in qgv points masking function
(Ville Syrjälä)
- Moved intel_qgv_points_mask closer to gen11 SAGV disabling,
however this still can't be under modeset condition(Ville Syrjälä)
- Packed qgv_points_mask as u8 and moved closer to pipe_sagv_mask
(Ville Syrjälä)
- Extracted PCode changes to separate patch.(Ville Syrjälä)
- Now treat num_planes 0 same as 1 to avoid confusion and
returning max_bw as 0, which would prevent choosing QGV
point having max bandwidth in case if SAGV is not allowed,
as per BSpec(Ville Syrjälä)
- Do the actual qgv_points_mask swap in the same place as
all other global state parts like cdclk are swapped.
In the next patch, this all will be moved to bw state as
global state, once new global state patch series from Ville
lands
v14: - Now using global state to serialize access to qgv points
- Added global state locking back, otherwise we seem to read
bw state in a wrong way.
v15: - Added TODO comment for near atomic global state locking in
bw code.
v16: - Fixed intel_atomic_bw_* functions to be intel_bw_* as discussed
with Jani Nikula.
- Take bw_state_changed flag into use.
v17: - Moved qgv point related manipulations next to SAGV code, as
those are semantically related(Ville Syrjälä)
- Renamed those into intel_sagv_(pre)|(post)_plane_update
(Ville Syrjälä)
v18: - Move sagv related calls from commit tail into
intel_sagv_(pre)|(post)_plane_update(Ville Syrjälä)
v19: - Use intel_atomic_get_bw_(old)|(new)_state which is intended
for commit tail stage.
v20: - Return max bandwidth for 0 planes(Ville)
- Constify old_bw_state in bw_atomic_check(Ville)
- Removed some debugs(Ville)
- Added data rate to debug print when no QGV points(Ville)
- Removed some comments(Ville)
v21, v22, v23: - Fixed rebase conflict
v24: - Changed PCode mask to use ICL_ prefix
v25: - Resolved rebase conflict
v26: - Removed redundant NULL checks(Ville)
- Removed redundant error prints(Ville)
v27: - Use device specific drm_err(Ville)
- Fixed parenthesis ident reported by checkpatch
Line over 100 warns to be fixed together with
existing code style.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
[vsyrjala: Drop duplicate intel_sagv_{pre,post}_plane_update() prototypes
and drop unused NUM_SAGV_POINTS define]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514074853.9508-3-stanislav.lisovskiy@intel.com
Starting from TGL we need to have a separate wm0
values for SAGV and non-SAGV which affects
how calculations are done.
v2: Remove long lines
v3: Removed COLOR_PLANE enum references
v4, v5, v6: Fixed rebase conflict
v7: - Removed skl_plane_wm_level accessor from skl_allocate_pipe_ddb(Ville)
- Removed sagv_uv_wm0(Ville)
- can_sagv->use_sagv_wm(Ville)
v8: - Moved tgl_crtc_can_enable_sagv function up(Ville)
- Changed comment regarding pipe_wm usage(Ville)
- Call intel_can_enable_sagv and tgl_compute_sagv_wm only
for Gen12(Ville)
- Some sagv debugs removed(Ville)
- skl_print_wm_changes improvements(Ville)
- Do assignment instead of memcpy in
skl_pipe_wm_get_hw_state(Ville)
v9: - Removed can_sagv variable(Ville)
- Removed spurious line(Ville)
- Changed u32 to unsigned int as agreed(Ville)
- Assign sagv only for gen12 in
skl_pipe_wm_get_hw_state(Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
[vsyrjala: Remove the dead 'return false' from intel_crtc_can_enable_sagv()]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514074853.9508-2-stanislav.lisovskiy@intel.com
In order to use a common VSC SDP Colorimetry calculating code on PSR,
it uses a new psr vsc sdp compute routine.
Because PSR routine has its own scenario and timings of writing a VSC SDP,
the current PSR routine needs to have its own drm_dp_vsc_sdp structure
member variable on struct i915_psr.
In order to calculate colorimetry information, intel_psr_update()
function and intel_psr_enable() function extend a drm_connector_state
argument.
There are no changes to PSR mechanism.
v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Rebased
v8: Rebased
v10: When a PSR is enabled, it needs to add DP_SDP_VSC to
infoframes.enable.
It is needed for comparing between HW and pipe_state of VSC_SDP.
v11: If PSR is disabled by flag, it don't enable psr on pipe compute.
v12: Fix an inconsistent indenting
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-15-gwan-gyeong.mun@intel.com
In order to use a common VSC SDP Colorimetry calculating code on PSR,
it adds a compute routine for PSR VSC SDP.
As PSR routine can not use infoframes.vsc of crtc state, it also adds new
writing of DP SDPs (Secondary Data Packet) for PSR.
PSR routine has its own scenario and timings of writing a VSC SDP.
v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Use struct drm_device logging macros
v10: 1) Fix packing of VSC SDP where Pixel Encoding/Colorimetry Format is
not supported.
2) Change a checking of PSR state.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-14-gwan-gyeong.mun@intel.com
Call intel_dp_set_infoframes(false) function on intel_ddi_post_disable_dp()
to make sure not to send VSC SDP and HDR Metadata Infoframe SDP.
v5: Polish commit message [Uma]
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-13-gwan-gyeong.mun@intel.com
Call intel_dp_set_infoframes() function on pipe updates to make sure
that we send VSC SDP and HDR Metadata Infoframe SDP (when applicable)
on fastsets.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-12-gwan-gyeong.mun@intel.com
Compared to implementation of DP and HDMI's encoder->infoframes_enabled,
the lspcon's implementation returns its active state. (we expect enabled
infoframe states of HW.) It leads to pipe state mismatch error
when ddi_get_config is called.
Because the current implementation of lspcon is not ready to support
readout infoframes, we need to return 0 here.
In order to support readout to lspcon, we need to implement read_infoframe
and infoframes_enabled. And set_infoframes also have to set an appropriate
bit on crtc_state->infoframes.enable
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-11-gwan-gyeong.mun@intel.com
Added state readout for DP VSC SDP and enabled state validation
for DP VSC SDP.
v2: Minor style fix
v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Use struct drm_device logging macros
v10: Skip checking of VSC SDP when a crtc config has psr.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-10-gwan-gyeong.mun@intel.com
In order to use computed config for DP SDPs (DP VSC SDP and DP HDR Metadata
Infoframe SDP), it replaces intel_dp_vsc_enable() function and
intel_dp_hdr_metadata_enable() function to intel_dp_set_infoframes()
function.
And it removes unused functions.
Before:
intel_dp_vsc_enable() and intel_dp_hdr_metadata_enable() compute sdp
configs and program sdp registers on enable callback of encoder.
After:
It separates computing of sdp configs and programming of sdp register.
The compute config callback of encoder calls computing sdp configs.
The enable callback of encoder calls programming sdp register.
v3: Rebased
v5: Polish commit message [Uma]
v10: Rebased
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-8-gwan-gyeong.mun@intel.com
Dump out the DP VSC SDP in the normal crtc state dump
v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
Use drm core's DP VSC SDP logging function
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-7-gwan-gyeong.mun@intel.com
Dump out the DP HDR Metadata Infoframe SDP in the normal crtc state dump.
HDMI Dynamic Range and Mastering (DRM) infoframe and DP HDR Metadata
Infoframe SDP use the same member variable in infoframes of crtc state.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-6-gwan-gyeong.mun@intel.com
When receiving video it is very useful to be able to log DP VSC SDP.
This greatly simplifies debugging.
v2: Minor style fix
v3: Move logging functions to drm core [Jani N]
v5: Rebased
v10: Rebased
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-4-gwan-gyeong.mun@intel.com
It adds code to read the DP SDPs from the video DIP and unpack them into
the crtc state.
It adds routines that read out DP VSC SDP and DP HDR Metadata Infoframe SDP
In order to unpack DP VSC SDP, it adds intel_dp_vsc_sdp_unpack() function.
It follows DP 1.4a spec. [Table 2-116: VSC SDP Header Bytes] and
[Table 2-117: VSC SDP Payload for DB16 through DB18]
In order to unpack DP HDR Metadata Infoframe SDP, it adds
intel_dp_hdr_metadata_infoframe_sdp_unpack(). And it follows DP 1.4a spec.
([Table 2-125: INFOFRAME SDP v1.2 Header Bytes] and
[Table 2-126: INFOFRAME SDP v1.2 Payload Data Bytes - DB0 through DB31])
and CTA-861-G spec. [Table-42 Dynamic Range and Mastering InfoFrame].
A naming rule and style of intel_read_dp_sdp() function references
intel_read_infoframe() function of intel_hdmi.c
v2: Minor style fix
v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Use struct drm_device logging macros
v5: Addressed review comments from Uma
- Polish commit message and comments
- Combine the if checks of sdp.HB2 and sdp.HB3
- Add 6bpc to unpacking of VSC SDP
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-3-gwan-gyeong.mun@intel.com
The second try at staging the transfer of the breadcrumb. In part one,
we realised we could not simply move to the second engine as we were
only holding the breadcrumb lock on the first. So in commit 6c81e21a47
("drm/i915/gt: Stage the transfer of the virtual breadcrumb"), we
removed it from the first engine and marked up this request to reattach
the signaling on the new engine. However, this failed to take into
account that we only attach the breadcrumb if the new request is added
at the start of the queue, which if we are transferring, it is because
we know there to be a request to be signaled (and hence we would not be
attached).
In this attempt, we try to transfer the completed requests to the
irq_worker on its rq->engine->breadcrumbs. This preserves the coupling
between the rq and its breadcrumbs, so that
i915_request_cancel_breadcrumb() does not attempt to manipulate the list
under the wrong lock.
v2: Code sharing is fun.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1862
Fixes: 6c81e21a47 ("drm/i915/gt: Stage the transfer of the virtual breadcrumb")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513074809.18194-1-chris@chris-wilson.co.uk
By providing the default values configured into the kernel via sysfs, it
is much more convenient for userspace to restore those sane defaults, or
at least know what are considered good baseline. This is useful, for
example, to cleanup after any failed userspace prior to commencing new
jobs.
/sys/class/drm/card0/engine/rcs0/
├── capabilities
├── class
├── .defaults
│ ├── heartbeat_interval_ms
│ ├── max_busywait_duration_ns
│ ├── preempt_timeout_ms
│ ├── stop_timeout_ms
│ └── timeslice_duration_ms
├── heartbeat_interval_ms
├── instance
├── known_capabilities
├── max_busywait_duration_ns
├── mmio_base
├── name
├── preempt_timeout_ms
├── stop_timeout_ms
└── timeslice_duration_ms
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514062905.28668-1-chris@chris-wilson.co.uk
Now that we have fast timeslicing on semaphores, we no longer need to
prioritise none-semaphore work as we will yield any work blocked on a
semaphore to the next in the queue. Previously with no timeslicing,
blocking on the semaphore caused extremely bad scheduling with multiple
clients utilising multiple rings. Now, there is no impact and we can
remove the complication.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513173504.28322-1-chris@chris-wilson.co.uk
Driver Changes:
- Fix GitLab #1698: Performance regression with Linux 5.7-rc1 on
Iris Plus 655 and 4K screen (Chris)
- Add Wa_14011059788 for Tigerlake (Matt A)
- Add per ctx batchbuffer wa for timestamp for Gen12 (Mika)
- Use indirect ctx bb to load cmd buffer control value
from context image to avoid corruption (Mika)
- Enable DP Display Audio WA (Uma, Jani)
- Update forcewake firmware ranges for Icelake (Radhakrishna)
- Add missing deinitialization cases of load failure for display (Jose)
- Implement TC cold sequences for Icelake and Tigerlake (Jose)
- Unbreak enable_dpcd_backlight modparam (Lyude)
- Move the late flush_submission in retire to the end (Chris)
- Demote "Reducing compressed framebufer size" message to info (Peter)
- Push MST link retraining to the hotplug work (Ville)
- Hold obj->vma.lock over for_each_ggtt_vma() (Chris)
- Fix timeout handling during TypeC AUX power well enabling for ICL (Imre)
- Fix skl+ non-scaled pfit modes (Ville)
- Prefer soft-rc6 over RPS DOWN_TIMEOUT (Chris)
- Sanitize GT first before poisoning HWSP (Chris)
- Fix up clock RPS frequency readout (Chris)
- Avoid reusing the same logical CCID (Chris)
- Avoid dereferencing a dead context (Chris)
- Always enable busy-stats for execlists (Chris)
- Apply the aggressive downclocking to parking (Chris)
- Restore aggressive post-boost downclocking (Chris)
- Scrub execlists state on resume (Chris)
- Add debugfs attributes for LPSP (Ansuman)
- Improvements to kernel selftests (Chris, Mika)
- Add tiled blits selftest (Zbigniew)
- Fix error handling in __live_lrc_indirect_ctx_bb() (Dan)
- Add pre/post plane updates for SAGV (Stanislav)
- Add ICL PG3 PW ID for EHL (Anshuman)
- Fix Sphinx build duplicate label warning (Jani)
- Error log non-zero audio power refcount after unbind (Jani)
- Remove object_is_locked assertion from unpin_from_display_plane (Chris)
- Use single set of AUX powerwell ops for gen11+ (Matt R)
- Prefer drm_WARN_ON over WARN_ON (Pankaj)
- Poison residual state [HWSP] across resume (Chris, Tvrtko)
- Convert request-before-CS assertion to debug (Chris)
- Carefully order virtual_submission_tasklet (Chris)
- Check carefully for an idle engine in wait-for-idle (Chris)
- Only close vma we open (Chris)
- Trace RPS events (Chris)
- Use the RPM config register to determine clk frequencies (Chris)
- Drop rq->ring->vma peeking from error capture (Chris)
- Check preempt-timeout target before submit_ports (Chris)
- Check HWSP cacheline is valid before acquiring (Chris)
- Use proper fault mask in interrupt postinstall too (Matt R)
- Keep a no-frills swappable copy of the default context state (Chris)
- Add atomic helpers for bandwidth (Stanislav)
- Refactor setting dma info to a common helper from device info (Michael)
- Refactor DDI transcoder code for clairty (Ville)
- Extend PG3 power well ID to ICL (Anshuman)
- Refactor PFIT code for readability and future extensibility (Ville)
- Clarify code split between intel_ddi.c and intel_dp.c (Ville)
- Move out code to return the digital_port of the aux ch (Jose)
- Move rps.enabled/active and use of RPS interrupts to flags (Chris)
- Remove superfluous inlines and dead code (Jani)
- Re-disable -Wframe-address from top-level Makefile (Nick)
- Static checker and spelling fixes (Colin, Nathan)
- Split long lines (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430124904.GA100924@jlahtine-desk.ger.corp.intel.com
According to drm_plane_create_zpos_property() function documentation,
all planes zpos range should be set if zpos property is supported.
However, the rcar-du driver didn't set primary plane zpos range. Since
the primary plane's zpos is fixed, set it immutably.
Reported-by: Yoshihito Ogawa <yoshihito.ogawa.kc@renesas.com>
Reported-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[Turn continue into if ... else ...]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The zpos property is used by userspace to sort the order of planes.
While the property is not mandatory for drivers to implement, mixing
planes with and without zpos confuses userspace, and shall not be
allowed. Clarify this in the documentation and warn at runtime if the
drivers mixes planes with and without zpos properties.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These were used to set various timeouts for the reset procedure
(deciding when the engine was dead, and even if the reset itself was not
making forward progress). No longer used.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513074809.18194-14-chris@chris-wilson.co.uk
The initial-breadcrumb is used to mark the end of the awaiting and the
beginning of the user payload. We verify that we do not start the user
payload before all signaler are completed, checking our semaphore setup
by looking for the initial breadcrumb being written too early. We also
want to ensure that we do not add semaphore waits after we have already
closed the semaphore section, an issue for later deferred waits.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513165937.9508-2-chris@chris-wilson.co.uk
Since there can only be one of in_fence/exec_fence, just use the single
in_fence local.
v2: Consolidate lookup
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513180937.28992-1-chris@chris-wilson.co.uk
When building with clang:
drivers/gpu/drm/i915/gt/gen8_ppgtt.c:392:24: warning: duplicate
'inline' declaration specifier [-Wduplicate-decl-specifier]
declaration specifier [-Wduplicate-decl-specifier]
static __always_inline inline void
^
include/linux/compiler_types.h:138:16: note: expanded from macro
'inline'
#define inline inline __gnu_inline __inline_maybe_unused notrace
^
1 warning generated.
__always_inline is defined as 'inline __attribute__((__always_inline))'
so we do not need to specify it twice.
Fixes: 84eac0c659 ("drm/i915/gt: Force pte cacheline to main memory")
Link: https://github.com/ClangBuiltLinux/linux/issues/1024
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513182340.3968668-1-natechancellor@gmail.com
Seems that only skl needs to have SAGV turned off
for multipipe scenarios, so lets do it this way.
If anything blows up - we can always revert this patch.
v2: Changed if condition to look better (Ville).
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
[vsyrjala: wrapped long line to appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513093816.11466-4-stanislav.lisovskiy@intel.com
Introduce platform dependent SAGV checking in
combination with bandwidth state pipe SAGV mask.
This is preparation to adding TGL support, which
requires different way of SAGV checking.
v2, v3, v4, v5, v6: Fix rebase conflict
v7: - Nuke icl specific function, use skl
for icl as well, gen specific active_pipes
check to be added in the next patch(Ville)
v8: - Use more generic intel_crtc_can_enable_sagv
for checking(Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513093816.11466-3-stanislav.lisovskiy@intel.com
For future Gen12 SAGV implementation we need to
seemlessly alter wm levels calculated, depending
on whether we are allowed to enable SAGV or not.
So this accessor will give additional flexibility
to do that.
Currently this accessor is still simply working
as "pass-through" function. This will be changed
in next coming patches from this series.
v2: - plane_id -> plane->id(Ville Syrjälä)
- Moved wm_level var to have more local scope
(Ville Syrjälä)
- Renamed yuv to color_plane(Ville Syrjälä) in
skl_plane_wm_level
v3: - plane->id -> plane_id(this time for real, Ville Syrjälä)
- Changed colorplane id type from boolean to int as index
(Ville Syrjälä)
- Moved crtc_state param so that it is first now
(Ville Syrjälä)
- Moved wm_level declaration to tigher scope in
skl_write_plane_wm(Ville Syrjälä)
v4: - Started to use enum values for color plane
- Do sizeof for a type what we are memset'ing
- Zero out wm_uv as well(Ville Syrjälä)
v5: - Fixed rebase conflict caused by COLOR_PLANE_*
enum removal
v6: - Do not use skl_plane_wm_level accessor in skl_allocate_pipe_ddb
v7: - Get rid of wm_uv, which is not used in skl_plane_write_wm(Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513093816.11466-2-stanislav.lisovskiy@intel.com
Upon gt resume, we first poison then sanitize the engine. However, our
testing shows that gen9 will very rarely retain the poisoned value from
the HWSP mappings of the execlists status registers. This suggests that
it is reading back from the HWSP, so rejig the register reset.
v2: Maybe RING_CONTEXT_STATUS_PTR is write masked. It is.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1812
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513100120.11617-1-chris@chris-wilson.co.uk
i915_gem_evict_something() is charged with finding a slot within the GTT
that we may reuse. Since our goal is not to stall, we first look for a
slot that only overlaps idle vma. To this end, on the first pass we move
any active vma to the end of the search list. However, we only stopped
moving active vma after we see the first active vma twice. If during the
search, that first active vma completed, we would not notice and keep on
extending the search list.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1746
Fixes: 2850748ef8 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Fixes: b1e3177bd1 ("drm/i915: Coordinate i915_active with its own mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200509115217.26853-1-chris@chris-wilson.co.uk
Fix the following gcc warning:
drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c:65:18: warning: ‘crtc_offsets’
defined but not used [-Wunused-const-variable=]
static const u32 crtc_offsets[6] =
^~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For MST case: when update_config is called to disable a stream,
this clears the settings for all the streams on that link.
We should only clear the settings for the stream that was disabled.
[How]
Clear the settings after the call to remove display is called.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Requested bits for UMR support
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On my raven1 system (rev c6) with VBIOS 113-RAVEN-114 GFXOFF is
not stable (resulting in large block tiling noise in some applications).
Disabling GFXOFF via the quirk list fixes the problems for me.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
since for sriov, baco happens on host side, no need and meaning
to judge is baco.
also, since kiq reads strap0 in here, if kiq is not ready
or gpu reset(kiq resume) happens after this read, would fail
to read and wrongly set baco as true(1).
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
