mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 02:16:39 +07:00
738a7edbfc
538 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Lukas Wunner
|
738a7edbfc |
PCI: Don't acquire ref on parent in pci_bridge_d3_update()
This function is always called with an existing pci_dev struct, which holds a reference on the pci_bus struct it resides on, which in turn holds a reference on pci_bus->bridge, which is the pci_dev's parent. Hence there's no need to acquire an additional ref on the parent. More specifically, the pci_dev exists until pci_destroy_dev() drops the final reference on it, so all calls to pci_bridge_d3_update() must be finished before that. It is arguably the caller's responsibility to ensure that it doesn't call pci_bridge_d3_update() with a pci_dev that might suddenly disappear, but in any case the existing callers are all safe: - The call in pci_destroy_dev() happens before the call to put_device(). - The call in pci_bus_add_device() is synchronized with pci_destroy_dev() using pci_lock_rescan_remove(). - The calls to pci_d3cold_disable() from the xhci and nouveau drivers are safe because a ref on the pci_dev is held as long as it's bound to a driver. - The calls to pci_d3cold_enable() / pci_d3cold_disable() when modifying the sysfs "d3cold_allowed" entry are also safe because kernfs_drain() waits for existing sysfs users to finish before removing the entry, and pci_destroy_dev() is called way after that. No functional change intended. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Alan Stern
|
6496ebd7ed |
PCI: Check for PME in targeted sleep state
One some systems, the firmware does not allow certain PCI devices to be put in deep D-states. This can cause problems for wakeup signalling, if the device does not support PME# in the deepest allowed suspend state. For example, Pierre reports that on his system, ACPI does not permit his xHCI host controller to go into D3 during runtime suspend -- but D3 is the only state in which the controller can generate PME# signals. As a result, the controller goes into runtime suspend but never wakes up, so it doesn't work properly. USB devices plugged into the controller are never detected. If the device relies on PME# for wakeup signals but is not capable of generating PME# in the target state, the PCI core should accurately report that it cannot do wakeup from runtime suspend. This patch modifies the pci_dev_run_wake() routine to add this check. Reported-by: Pierre de Villemereuil <flyos@mailoo.org> Tested-by: Pierre de Villemereuil <flyos@mailoo.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org CC: Lukas Wunner <lukas@wunner.de> |
||
Linus Torvalds
|
e6e3d8f8f4 |
PCI changes for the v4.9 merge window:
Enumeration microblaze: Add multidomain support for procfs (Bharat Kumar Gogada) Resource management Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie) Ignore requested alignment for VF BARs (Yongji Xie) PCI device hotplug Make core explicitly non-modular (Paul Gortmaker) PCIe native device hotplug Rename pcie_isr() locals for clarity (Bjorn Helgaas) Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas) Remove unnecessary guard (Bjorn Helgaas) Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas) Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas) Clear attention LED on device add (Keith Busch) Allow exclusive userspace control of indicators (Keith Busch) Process all hotplug events before looking for new ones (Mayurkumar Patel) Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel) Don't re-read Slot Status when handling surprise event (Mayurkumar Patel) Make explicitly non-modular (Paul Gortmaker) Power management Afford direct-complete to devices with non-standard PM (Lukas Wunner) Query platform firmware for device power state (Lukas Wunner) Recognize D3cold in pci_update_current_state() (Lukas Wunner) Avoid unnecessary resume after direct-complete (Lukas Wunner) Make explicitly non-modular (Paul Gortmaker) Virtualization Mark Atheros AR9580 to avoid bus reset (Maik Broemme) Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu) MSI Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto) AER Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas) Remove aerdriver.forceload kernel parameter (Bjorn Helgaas) Fix aer_probe() kernel-doc comment (Cao jin) Add bus flag to skip source ID matching (Jon Derrick) Avoid memory allocation in interrupt handling path (Jon Derrick) Cache capability position (Keith Busch) Make explicitly non-modular (Paul Gortmaker) Remove duplicate AER severity translation (Tyler Baicar) Send correct severity to calculate AER severity (Tyler Baicar) Precision Time Measurement Add Precision Time Measurement (PTM) support (Jonathan Yong) Add PTM clock granularity information (Bjorn Helgaas) Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas) Generic host bridge driver Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Make explicitly non-modular (Paul Gortmaker) Altera host bridge driver Remove redundant platform_get_resource() return value check (Bjorn Helgaas) Poll for link training status after retraining the link (Ley Foon Tan) Rework config accessors for use without a struct pci_bus (Ley Foon Tan) Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan) Make MSI explicitly non-modular (Paul Gortmaker) Make explicitly non-modular (Paul Gortmaker) Relax device number checking to allow SR-IOV (Po Liu) ARM Versatile host bridge driver Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Axis ARTPEC-6 host bridge driver Drop __init from artpec6_add_pcie_port() (Niklas Cassel) Freescale i.MX6 host bridge driver Make explicitly non-modular (Paul Gortmaker) Intel VMD host bridge driver Add quirk for AER to ignore source ID (Jon Derrick) Allocate IRQ lists with correct MSI-X count (Jon Derrick) Convert to use pci_alloc_irq_vectors() API (Jon Derrick) Eliminate vmd_vector member from list type (Jon Derrick) Eliminate index member from IRQ list (Jon Derrick) Synchronize with RCU freeing MSI IRQ descs (Keith Busch) Request userspace control of PCIe hotplug indicators (Keith Busch) Move VMD driver to drivers/pci/host (Keith Busch) Marvell Aardvark host bridge driver Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun) Microsoft Hyper-V host bridge driver Use zero-length array in struct pci_packet (Dexuan Cui) Use pci_function_description[0] in struct definitions (Dexuan Cui) Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui) Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui) Handle hv_pci_generic_compl() error case (Dexuan Cui) Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun) NVIDIA Tegra host bridge driver Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Remove redundant _data suffix (Thierry Reding) Use of_device_get_match_data() (Thierry Reding) Qualcomm host bridge driver Make explicitly non-modular (Paul Gortmaker) Renesas R-Car host bridge driver Consolidate register space lookup and ioremap (Bjorn Helgaas) Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven) Add multi-MSI support (Grigory Kletsko) Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Fix some checkpatch warnings (Sergei Shtylyov) Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov) Rockchip host bridge driver Add DT bindings for Rockchip PCIe controller (Shawn Lin) Add Rockchip PCIe controller support (Shawn Lin) Improve the deassert sequence of four reset pins (Shawn Lin) Fix wrong transmitted FTS count (Shawn Lin) Increase the Max Credit update interval (Rajat Jain) Samsung Exynos host bridge driver Make explicitly non-modular (Paul Gortmaker) ST Microelectronics SPEAr13xx host bridge driver Make explicitly non-modular (Paul Gortmaker) Synopsys DesignWare host bridge driver Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas) Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo) Check LTSSM training bit before deciding link is up (Jisheng Zhang) Move link wait definitions to .c file (Joao Pinto) Wait for iATU enable (Joao Pinto) Add iATU Unroll feature (Joao Pinto) Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Make explicitly non-modular (Paul Gortmaker) Relax device number checking to allow SR-IOV (Po Liu) Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand) Remove redundant platform_get_resource() return value check (Wei Yongjun) TI DRA7xx host bridge driver Make explicitly non-modular (Paul Gortmaker) TI Keystone host bridge driver Propagate request_irq() failure (Wei Yongjun) Xilinx AXI host bridge driver Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada) Clear interrupt register for invalid interrupt (Bharat Kumar Gogada) Clear correct MSI set bit (Bharat Kumar Gogada) Dispose of MSI virtual IRQ (Bharat Kumar Gogada) Make explicitly non-modular (Paul Gortmaker) Relax device number checking to allow SR-IOV (Po Liu) Xilinx NWL host bridge driver Expand error logging (Bharat Kumar Gogada) Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada) Make explicitly non-modular (Paul Gortmaker) Miscellaneous Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner) portdrv: Make explicitly non-modular (Paul Gortmaker) Make DPC explicitly non-modular (Paul Gortmaker) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJX9pOwAAoJEFmIoMA60/r8NfMQAMEMYK3yv/RQtcQvtB26L2eJ Zn6eJXZPFDsaP+uRYrZEEphHccGFJgmtnOEYjo5XH+wUovmj8BxIy58APEGij/69 iJyaXkI2jRVCOFna6WLJKS0jM6/Lw40RdwrANqHfvzR9N8pEjDD36BglshFNK/pK 07dYNtI+/sq1j5K1UE6bK4uiAURiPc2SfK4/+M4Mg4SfZMQgLIvpT8VHdercYSXN eGA0SHGNm8qIK2JArwa293z6zB0Kw05juLayZHai6PwDqqNMvzgzS4pChGJl4klH fFe3bhlBVR2SGh9nuHMgIMWKGKGkjWBjwS1p0ENDgdpBVPXmDIc7Ka8Q0BqAFz+F YOmj4BtR8U3mOj942bxYZYqqqt02Brlu+/YkY6+OtNjKWi7w0s24dd5vEfBl2nVV T2klW4P9MuCnsutfrxkFL8voJRCIdV3fohwLHfHVfNTZN+bSZnlo9MiywbgQlexV 5BKIA5z9E87bhvo7Mr8VCZjjEV0E3RrT4sgaJyQhGUGIpuZDiZFHSujBo53jRSdy jvIb22cQtmQJAkafID6djcMbXh+LIhXqUfH1ZVqpJFFMJN43zB7dwaMwrLsZgqTi ZV7VxZJVN7U6JCQvtNvwLBeKT82T7jxVZoSIogc/UR0gelb6jPN/yiTX5TUzMgPs HW7F3hv0AdmYKPcGZJAP =0Aq4 -----END PGP SIGNATURE----- Merge tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Summary of PCI changes for the v4.9 merge window: Enumeration: - microblaze: Add multidomain support for procfs (Bharat Kumar Gogada) Resource management: - Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie) - Ignore requested alignment for VF BARs (Yongji Xie) PCI device hotplug: - Make core explicitly non-modular (Paul Gortmaker) PCIe native device hotplug: - Rename pcie_isr() locals for clarity (Bjorn Helgaas) - Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas) - Remove unnecessary guard (Bjorn Helgaas) - Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas) - Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas) - Clear attention LED on device add (Keith Busch) - Allow exclusive userspace control of indicators (Keith Busch) - Process all hotplug events before looking for new ones (Mayurkumar Patel) - Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel) - Don't re-read Slot Status when handling surprise event (Mayurkumar Patel) - Make explicitly non-modular (Paul Gortmaker) Power management: - Afford direct-complete to devices with non-standard PM (Lukas Wunner) - Query platform firmware for device power state (Lukas Wunner) - Recognize D3cold in pci_update_current_state() (Lukas Wunner) - Avoid unnecessary resume after direct-complete (Lukas Wunner) - Make explicitly non-modular (Paul Gortmaker) Virtualization: - Mark Atheros AR9580 to avoid bus reset (Maik Broemme) - Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu) MSI: - Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto) AER: - Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas) - Remove aerdriver.forceload kernel parameter (Bjorn Helgaas) - Fix aer_probe() kernel-doc comment (Cao jin) - Add bus flag to skip source ID matching (Jon Derrick) - Avoid memory allocation in interrupt handling path (Jon Derrick) - Cache capability position (Keith Busch) - Make explicitly non-modular (Paul Gortmaker) - Remove duplicate AER severity translation (Tyler Baicar) - Send correct severity to calculate AER severity (Tyler Baicar) Precision Time Measurement: - Add Precision Time Measurement (PTM) support (Jonathan Yong) - Add PTM clock granularity information (Bjorn Helgaas) - Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas) Generic host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Make explicitly non-modular (Paul Gortmaker) Altera host bridge driver: - Remove redundant platform_get_resource() return value check (Bjorn Helgaas) - Poll for link training status after retraining the link (Ley Foon Tan) - Rework config accessors for use without a struct pci_bus (Ley Foon Tan) - Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan) - Make MSI explicitly non-modular (Paul Gortmaker) - Make explicitly non-modular (Paul Gortmaker) - Relax device number checking to allow SR-IOV (Po Liu) ARM Versatile host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Axis ARTPEC-6 host bridge driver: - Drop __init from artpec6_add_pcie_port() (Niklas Cassel) Freescale i.MX6 host bridge driver: - Make explicitly non-modular (Paul Gortmaker) Intel VMD host bridge driver: - Add quirk for AER to ignore source ID (Jon Derrick) - Allocate IRQ lists with correct MSI-X count (Jon Derrick) - Convert to use pci_alloc_irq_vectors() API (Jon Derrick) - Eliminate vmd_vector member from list type (Jon Derrick) - Eliminate index member from IRQ list (Jon Derrick) - Synchronize with RCU freeing MSI IRQ descs (Keith Busch) - Request userspace control of PCIe hotplug indicators (Keith Busch) - Move VMD driver to drivers/pci/host (Keith Busch) Marvell Aardvark host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun) Microsoft Hyper-V host bridge driver: - Use zero-length array in struct pci_packet (Dexuan Cui) - Use pci_function_description[0] in struct definitions (Dexuan Cui) - Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui) - Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui) - Handle hv_pci_generic_compl() error case (Dexuan Cui) - Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun) NVIDIA Tegra host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Remove redundant _data suffix (Thierry Reding) - Use of_device_get_match_data() (Thierry Reding) Qualcomm host bridge driver: - Make explicitly non-modular (Paul Gortmaker) Renesas R-Car host bridge driver: - Consolidate register space lookup and ioremap (Bjorn Helgaas) - Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven) - Add multi-MSI support (Grigory Kletsko) - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Fix some checkpatch warnings (Sergei Shtylyov) - Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov) Rockchip host bridge driver: - Add DT bindings for Rockchip PCIe controller (Shawn Lin) - Add Rockchip PCIe controller support (Shawn Lin) - Improve the deassert sequence of four reset pins (Shawn Lin) - Fix wrong transmitted FTS count (Shawn Lin) - Increase the Max Credit update interval (Rajat Jain) Samsung Exynos host bridge driver: - Make explicitly non-modular (Paul Gortmaker) ST Microelectronics SPEAr13xx host bridge driver: - Make explicitly non-modular (Paul Gortmaker) Synopsys DesignWare host bridge driver: - Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas) - Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo) - Check LTSSM training bit before deciding link is up (Jisheng Zhang) - Move link wait definitions to .c file (Joao Pinto) - Wait for iATU enable (Joao Pinto) - Add iATU Unroll feature (Joao Pinto) - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Make explicitly non-modular (Paul Gortmaker) - Relax device number checking to allow SR-IOV (Po Liu) - Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand) - Remove redundant platform_get_resource() return value check (Wei Yongjun) TI DRA7xx host bridge driver: - Make explicitly non-modular (Paul Gortmaker) TI Keystone host bridge driver: - Propagate request_irq() failure (Wei Yongjun) Xilinx AXI host bridge driver: - Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada) - Clear interrupt register for invalid interrupt (Bharat Kumar Gogada) - Clear correct MSI set bit (Bharat Kumar Gogada) - Dispose of MSI virtual IRQ (Bharat Kumar Gogada) - Make explicitly non-modular (Paul Gortmaker) - Relax device number checking to allow SR-IOV (Po Liu) Xilinx NWL host bridge driver: - Expand error logging (Bharat Kumar Gogada) - Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada) - Make explicitly non-modular (Paul Gortmaker) Miscellaneous: - Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner) - portdrv: Make explicitly non-modular (Paul Gortmaker) - Make DPC explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (105 commits) x86/PCI: VMD: Move VMD driver to drivers/pci/host PCI: rockchip: Fix wrong transmitted FTS count PCI: rockchip: Improve the deassert sequence of four reset pins PCI: rockchip: Increase the Max Credit update interval PCI: rcar: Try increasing PCIe link speed to 5 GT/s at boot PCI/AER: Fix aer_probe() kernel-doc comment PCI: Ignore requested alignment for VF BARs PCI: Ignore requested alignment for PROBE_ONLY and fixed resources PCI: Avoid unnecessary resume after direct-complete PCI: Recognize D3cold in pci_update_current_state() PCI: Query platform firmware for device power state PCI: Afford direct-complete to devices with non-standard PM PCI/AER: Cache capability position PCI/AER: Avoid memory allocation in interrupt handling path x86/PCI: VMD: Request userspace control of PCIe hotplug indicators PCI: pciehp: Allow exclusive userspace control of indicators ACPI / APEI: Send correct severity to calculate AER severity PCI/AER: Remove duplicate AER severity translation x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs x86/PCI: VMD: Eliminate index member from IRQ list ... |
||
Bjorn Helgaas
|
e15194d2a7 |
Merge branch 'pci/resource' into next
* pci/resource: PCI: Ignore requested alignment for VF BARs PCI: Ignore requested alignment for PROBE_ONLY and fixed resources |
||
Yongji Xie
|
62d9a78f32 |
PCI: Ignore requested alignment for VF BARs
Resource allocation for VFs is done via the VF BARx registers in the PF's SR-IOV Capability, and the BARs in the VFs themselves are read-only zeros (see SR-IOV spec r1.1, secs 3.3.14 and 3.4.1.11). Even though the actual VF BARs are read-only zeros, the VF dev->resource[] structs describe the space allocated for the VF (this is a piece of the space described by the VF BARx register in the PF's SR-IOV capability). It's meaningless to request additional alignment for a VF: the VF BAR alignment is completely determined by the alignment of the VF BARx in the PF and the size of the VF BAR. Ignore the user's alignment requests for VF devices. Signed-off-by: Yongji Xie <xyjxie@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Yongji Xie
|
f0b99f70e9 |
PCI: Ignore requested alignment for PROBE_ONLY and fixed resources
Users may request additional alignment of PCI resources, e.g., to align BARs on page boundaries so they can be shared with guests via VFIO. This of course may require reallocation if firmware has already assigned the BARs with smaller alignments. If the platform has requested PCI_PROBE_ONLY, we should never change any PCI BARs, so we can't provide any additional alignment. Also, if a BAR is marked as IORESOURCE_PCI_FIXED, e.g., for PCI Enhanced Allocation or if the firmware depends on the current BAR value, we can't change the alignment. In these cases, log a message and ignore the user's alignment requests. [bhelgaas: changelog, use goto to simplify PCI_PROBE_ONLY check] Signed-off-by: Yongji Xie <xyjxie@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Lukas Wunner
|
a6a64026c0 |
PCI: Recognize D3cold in pci_update_current_state()
Whenever a device is resumed or its power state is changed using the platform, its new power state is read from the PM Control & Status Register and cached in pci_dev->current_state by calling pci_update_current_state(). If the device is in D3cold, reading from config space typically results in a fabricated "all ones" response. But if it's in D3hot, the two bits representing the power state in the PMCSR are *also* set to 1. Thus D3hot and D3cold are not discernible by just reading the PMCSR. To account for this, pci_update_current_state() uses two workarounds: - When transitioning to D3cold using pci_platform_power_transition(), the new power state is set blindly by pci_update_current_state(), i.e. without verifying that the device actually *is* in D3cold. This is achieved by setting the "state" argument to PCI_D3cold. The "state" argument was originally intended to convey the new state in case the device doesn't have the PM capability. It is *also* used to convey the device state if the PM capability is present and the new state is D3cold, but this was never explained in the kerneldoc. - Once the current_state is set to D3cold, further invocations of pci_update_current_state() will blindly assume that the device is still in D3cold and leave the current_state unmodified. To get out of this impasse, the current_state has to be set directly, typically by calling pci_raw_set_power_state() or pci_enable_device(). It would be desirable if pci_update_current_state() could reliably detect D3cold by itself. That would allow us to do away with these workarounds, and it would allow for a smarter, more energy conserving runtime resume strategy after system sleep: Currently devices which utilize direct_complete are mandatorily runtime resumed in their ->complete stage. This can be avoided if their power state after system sleep is the same as before, but it requires a mechanism to detect the power state reliably. We've just gained the ability to query the platform firmware for its opinion on the device's power state. On platforms conforming to ACPI 4.0 or newer, this allows recognition of D3cold. Pre-4.0 platforms lack _PR3 and therefore the deepest power state that will ever be reported is D3hot, even though the device may actually be in D3cold. To detect D3cold in those cases, accessibility of the vendor ID in config space is probed using pci_device_is_present(). This also works for devices which are not platform-power-manageable at all, but can be suspended to D3cold using a nonstandard mechanism (e.g. some hybrid graphics laptops or Thunderbolt on the Mac). Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Lukas Wunner
|
cc7cc02bad |
PCI: Query platform firmware for device power state
Usually the most accurate way to determine a PCI device's power state is to read its PM Control & Status Register. There are two cases however when this is not an option: If the device doesn't have the PM capability at all, or if it is in D3cold (in which case its config space is inaccessible). In both cases, we can alternatively query the platform firmware for its opinion on the device's power state. To facilitate this, augment struct pci_platform_pm_ops with a ->get_power callback and implement it for acpi_pci_platform_pm (the only pci_platform_pm_ops existing so far). It is used by a forthcoming commit to let pci_update_current_state() recognize D3cold. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Lukas Wunner
|
4132a577a0 |
PCI: Afford direct-complete to devices with non-standard PM
There are devices not power-manageable by the platform, but still able to runtime suspend to D3cold with a non-standard mechanism. One example is laptop hybrid graphics where the discrete GPU and its built-in HDA controller are power-managed either with a _DSM (AMD PowerXpress, Nvidia Optimus) or a separate gmux controller (MacBook Pro). Another example is Thunderbolt on Macs which is power-managed with custom ACPI methods. When putting the system to sleep, we currently handle such devices improperly by transitioning them from D3cold to D3hot (the default power state defined at the top of pci_target_state()). This wastes energy and prolongs the suspend sequence (powering up the Thunderbolt controller takes 2 seconds). Avoid that by assuming that a non-standard PM mechanism is at work if the device is not platform-power-manageable but currently in D3cold. If the device is wakeup enabled, we might still have to wake it up from D3cold if PME cannot be signaled from that power state. The check for devices without PM capability comes before the check for D3cold since such devices could in theory also be powered down by non-standard means and should then be afforded direct-complete as well. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Mika Westerberg
|
afd29f9017 |
PCI: Add pci_find_resource()
Add a new helper function pci_find_resource() that can be used to find out whether a given resource (for example from a child device) is contained within given PCI device's standard resources. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Linus Torvalds
|
c8d0267efd |
PCI changes for the v4.8 merge window:
Enumeration Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) Add parent device field to ECAM struct pci_config_window (Jayachandran C) Add generic MCFG table handling (Tomasz Nowicki) Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management Add devm_request_pci_bus_resources() (Bjorn Helgaas) Unify pci_resource_to_user() declarations (Bjorn Helgaas) Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) Make PCI I/O space optional on ARM32 (Bjorn Helgaas) Ignore write combining when mapping I/O port space (Bjorn Helgaas) Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) Support I/O resources when parsing host bridge resources (Jayachandran C) Add helpers to request/release memory and I/O regions (Johannes Thumshirn) Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug Allow additional bus numbers for hotplug bridges (Keith Busch) Ignore interrupts during D3cold (Lukas Wunner) Power management Enforce type casting for pci_power_t (Andy Shevchenko) Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) Put PCIe ports into D3 during suspend (Mika Westerberg) Power on bridges before scanning new devices (Mika Westerberg) Runtime resume bridge before rescan (Mika Westerberg) Add runtime PM support for PCIe ports (Mika Westerberg) Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) Add DMA alias quirk for Adaptec 3805 (Alex Williamson) Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI Fix PCI_MSI dependencies (Arnd Bergmann) Add pci_msix_desc_addr() helper (Christoph Hellwig) Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) Remove DPC tristate module option (Keith Busch) Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver Select IRQ_DOMAIN (Arnd Bergmann) Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver Check link status before retrain link (Ley Foon Tan) Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver Use lock save/restore in interrupt enable path (Jon Derrick) Select device dma ops to override (Keith Busch) Initialize list item in IRQ disable (Keith Busch) Use x86_vector_domain as parent domain (Keith Busch) Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) Add Aardvark PCI host controller driver (Thomas Petazzoni) Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver Fix interrupt cleanup path (Cathy Avery) Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) Use lower-case hex consistently for register definitions (Thierry Reding) Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver Fix return value in case of error (Christophe JAILLET) Miscellaneous Make bus_attr_resource_alignment static (Ben Dooks) Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) Make host bridge drivers explicitly non-modular (Paul Gortmaker) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXoNRtAAoJEFmIoMA60/r8LMkP/3kiNh21QFS6RZGOaDft5/Py n14Zo0w51avspxoI3iyDlBd5q/SssMqi+2c6Ko/fh2D2xMxJgmQOjdMDrIGARxGA qEHk/5IoXquY2/GcptmCk3ap66cJ6kTovS4OPrb73m3fPuknFwFwdzExq22XHbnI crPya6xwQxPLc54VpY/TsgW8E+EKZd/3FW9wuzzNHXrXmTILyhBQzQAA0K470GMx wEXU6kc3M/XhRuF1zjV9/O+H/xguwfnbTpZLvd2NAF6uXKZoRytEHHtNnVqu1hoe UPpDS2xq32pMNbGxGqBetCdIbkY/hWOufmckHI7Yu2OfXBYyHBYMG2je1+nMPkOV WiFhhrchGt5KnEMUwXPS4ROqnSZVpZBl1Fd4s10GhUYkoE2HNKJXta398H9FR1jj 4NEVSi4mSX/+CkaoIN3lXYiaf9P0wv4Wppve4Scr30+VnLjJhm7Vw5La7v12oo6x otrJ/g98AkmnbuUdLeWBUS/+TOcdPjZYbw52rqBsbOOjFm51Zcj6D7kf5WcTypQy HzbvygSVabcioWehUG1uudC8pdJmQlUGx1aES/iu+mZEae4cuUFALu6hDBD9IYnZ 5JdwjVzI0UItEwT3rQt3t4xiAqHADQ0NAVNJVCeREdoy/YQpSoTWGXIpyqCZ1yCm aBykjRsxbKQXlhVeIxuc =NVxu -----END PGP SIGNATURE----- Merge tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ... |
||
Bjorn Helgaas
|
3efc702378 |
Merge branch 'pci/resource' into next
* pci/resource: unicore32/PCI: Remove pci=firmware command line parameter handling ARM/PCI: Remove arch-specific pcibios_enable_device() ARM64/PCI: Remove arch-specific pcibios_enable_device() MIPS/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups ARM/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups PCI: generic: Claim bus resources on PCI_PROBE_ONLY set-ups PCI: Add generic pci_bus_claim_resources() alx: Use pci_(request|release)_mem_regions ethernet/intel: Use pci_(request|release)_mem_regions GenWQE: Use pci_(request|release)_mem_regions lpfc: Use pci_(request|release)_mem_regions NVMe: Use pci_(request|release)_mem_regions PCI: Add helpers to request/release memory and I/O regions PCI: Extending pci=resource_alignment to specify device/vendor IDs sparc/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus() powerpc/pci: Implement pci_resource_to_user() with pcibios_resource_to_bus() microblaze/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus() PCI: Unify pci_resource_to_user() declarations microblaze/PCI: Remove useless __pci_mmap_set_pgprot() powerpc/pci: Remove __pci_mmap_set_pgprot() PCI: Ignore write combining when mapping I/O port space |
||
Bjorn Helgaas
|
a00c74c166 |
Merge branches 'pci/aspm', 'pci/dpc', 'pci/hotplug', 'pci/misc', 'pci/msi', 'pci/pm' and 'pci/virtualization' into next
* pci/aspm: PCI/ASPM: Remove redundant check of pcie_set_clkpm * pci/dpc: PCI: Remove DPC tristate module option PCI: Bind DPC to Root Ports as well as Downstream Ports PCI: Fix whitespace in struct dpc_dev PCI: Convert Downstream Port Containment driver to use devm_* functions * pci/hotplug: PCI: Allow additional bus numbers for hotplug bridges * pci/misc: PCI: Include <asm/dma.h> for isa_dma_bridge_buggy PCI: Make bus_attr_resource_alignment static MAINTAINERS: Add file patterns for PCI device tree bindings PCI: Fix comment typo * pci/msi: PCI/MSI: irqchip: Fix PCI_MSI dependencies * pci/pm: PCI: pciehp: Ignore interrupts during D3cold PCI: Document connection between pci_power_t and hardware PM capability PCI: Add runtime PM support for PCIe ports ACPI / hotplug / PCI: Runtime resume bridge before rescan PCI: Power on bridges before scanning new devices PCI: Put PCIe ports into D3 during suspend PCI: Don't clear d3cold_allowed for PCIe ports PCI / PM: Enforce type casting for pci_power_t * pci/virtualization: PCI: Add ACS quirk for Solarflare SFC9220 PCI: Add DMA alias quirk for Adaptec 3805 PCI: Mark Atheros AR9485 and QCA9882 to avoid bus reset PCI: Add function 1 DMA alias quirk for Marvell 88SE9182 |
||
Keith Busch
|
e16b466059 |
PCI: Allow additional bus numbers for hotplug bridges
A user may hot add a switch requiring more than one bus to enumerate. This previously required a system reboot if BIOS did not sufficiently pad the bus resource, which they frequently don't do. Add a kernel parameter so a user can specify the minimum number of bus numbers to reserve for a hotplug bridge's subordinate buses so rebooting won't be necessary. The default is 1, which is equivalent to previous behavior. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Andy Shevchenko
|
6ec39cf5cd |
PCI / PM: check all fields in pci_set_platform_pm()
When assign new PCI platform PM operations check for all mandatory fields to prevent NULL pointer dereference. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Ben Dooks
|
2a2aca316a |
PCI: Include <asm/dma.h> for isa_dma_bridge_buggy
At least on arm, <asm/dma.h> does not get included when building drivers/pci/pci.o. This causes the following build warning which can be fixed by including <asm/dma.h>: drivers/pci/pci.c:37:5: warning: symbol 'isa_dma_bridge_buggy' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Koehrer Mathias (ETAS/ESW5)
|
644a544fd9 |
PCI: Extending pci=resource_alignment to specify device/vendor IDs
Some uio-based PCI drivers, e.g., uio_cif do not work if the assigned PCI memory resources are not page aligned. By using the kernel option "pci=resource_alignment" it is possible to force single PCI boards to use page alignment for their memory resources. However, this is fairly cumbersome if several of these boards are in use as the specification of the cards has to be done via PCI bus/slot/function number which might change, e.g., by adding another board. Extend the kernel option "pci=resource_alignment" to allow specification of relevant devices via PCI device/vendor (and subdevice/subvendor) IDs. The specification of the devices via device/vendor is indicated by a leading string "pci:" as argument to "pci=resource_alignment". The format of the specification is pci:<vendor>:<device>[:<subvendor>:<subdevice>] Signed-off-by: Mathias Koehrer <mathias.koehrer@etas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Mika Westerberg
|
9d26d3a8f1 |
PCI: Put PCIe ports into D3 during suspend
Currently the Linux PCI core does not touch power state of PCI bridges and PCIe ports when system suspend is entered. Leaving them in D0 consumes power unnecessarily and may prevent the CPU from entering deeper C-states. With recent PCIe hardware we can power down the ports to save power given that we take into account few restrictions: - The PCIe port hardware is recent enough, starting from 2015. - Devices connected to PCIe ports are effectively in D3cold once the port is transitioned to D3 (the config space is not accessible anymore and the link may be powered down). - Devices behind the PCIe port need to be allowed to transition to D3cold and back. There is a way both drivers and userspace can forbid this. - If the device behind the PCIe port is capable of waking the system it needs to be able to do so from D3cold. This patch adds a new flag to struct pci_device called 'bridge_d3'. This flag is set and cleared by the PCI core whenever there is a change in power management state of any of the devices behind the PCIe port. When system later on is suspended we only need to check this flag and if it is true transition the port to D3 otherwise we leave it in D0. Also provide override mechanism via command line parameter "pcie_port_pm=[off|force]" that can be used to disable or enable the feature regardless of the BIOS manufacturing date. Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Ben Dooks
|
21751a9a4e |
PCI: Make bus_attr_resource_alignment static
The symbol bus_attr_resource_alignment is not exported or declared elsewhere, so make it static to fix the following warning: drivers/pci/pci.c:4900:1: warning: symbol 'bus_attr_resource_alignment' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Tomasz Nowicki
|
2ab51ddeca |
ARM64: PCI: Add acpi_pci_bus_find_domain_nr()
Extend pci_bus_find_domain_nr() so it can find the domain from either: - ACPI, via the new acpi_pci_bus_find_domain_nr() interface, or - DT, via of_pci_bus_find_domain_nr() Note that this is only used for CONFIG_PCI_DOMAINS_GENERIC=y, so it does not affect x86 or ia64. [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Tomasz Nowicki
|
1a4f93f711 |
PCI: Factor DT-specific pci_bus_find_domain_nr() code out
pci_bus_find_domain_nr() retrieves the host bridge domain number in a DT-specific way. Rename it to of_pci_bus_find_domain_nr() to reflect that, so we can add a corresponding function for ACPI. [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> |
||
Tomasz Nowicki
|
9c7cb891ec |
PCI: Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC
Instead of assigning bus->domain_nr inside pci_bus_assign_domain_nr(), return the domain and let the caller do the assignment. Rename pci_bus_assign_domain_nr() to pci_bus_find_domain_nr() to reflect this. No functional change intended. [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> |
||
Sinan Kaya
|
4d3f138459 |
PCI: Add pci_unmap_iospace() to unmap I/O resources
Add pci_unmap_iospace() to undo what pci_remap_iospace() did. This is needed to support hotplug removal of host bridges that use pci_remap_iospace(). [bhelgaas: changelog] Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> |
||
Bjorn Helgaas
|
e257ef55ce |
Merge branches 'pci/arm64' and 'pci/host-hv' into next
* pci/arm64: PCI, of: Move PCI I/O space management to PCI core code PCI: generic, thunder: Use generic ECAM API PCI: Provide common functions for ECAM mapping * pci/host-hv: PCI: hv: Add explicit barriers to config space access |
||
Bjorn Helgaas
|
45604e68ed |
Merge branches 'pci/hotplug' and 'pci/resource' into next
* pci/hotplug: PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit * pci/resource: PCI: Disable all BAR sizing for devices with non-compliant BARs x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARs PCI: Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs |
||
Alex Williamson
|
92efb1bd9b |
PCI: Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs
Resource flags are exposed to userspace via the sysfs "resource" file. lspci reads the sysfs file to determine resource properties. Add a "BAR Equivalent Indicator" flag so lspci can distinguish between [virtual] and [enhanced] resources. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Tomasz Nowicki
|
c5076cfe76 |
PCI, of: Move PCI I/O space management to PCI core code
No functional changes in this patch. PCI I/O space mapping code does not depend on OF; therefore it can be moved to PCI core code. This way we will be able to use it, e.g., in ACPI PCI code. Suggested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Liviu Dudau <Liviu.Dudau@arm.com> |
||
Bjorn Helgaas
|
7f768544c2 |
Merge branches 'pci/enumeration', 'pci/hotplug', 'pci/misc', 'pci/ntb', 'pci/thunderbolt' and 'pci/virtualization' into next
* pci/enumeration: x86/PCI: Refine PCI support check in pcibios_init() * pci/hotplug: PCI: acpiphp_ibm: Avoid uninitialized variable reference * pci/misc: PCI: Fix spelling errors * pci/ntb: PCI: Add DMA alias quirk for mic_x200_dma PCI: Add support for multiple DMA aliases PCI: Move informational printk to pci_add_dma_alias() PCI: Add pci_add_dma_alias() to abstract implementation * pci/thunderbolt: thunderbolt: Support 1st gen Light Ridge controller thunderbolt: Fix typos and magic number PCI: Add Intel Thunderbolt device IDs * pci/virtualization: PCI: Work around Intel Sunrise Point PCH incorrect ACS capability PCI: Reverse standard ACS vs device-specific ACS enabling PCI: Mark Intel i40e NIC INTx masking as broken |
||
Alex Williamson
|
c1d61c9bb1 |
PCI: Reverse standard ACS vs device-specific ACS enabling
The original thought was that if a device implemented ACS, then surely we want to use that... well, it turns out that devices can make an ACS capability so broken that we still need to fall back to quirks. Reverse the order of ACS enabling to give quirks first shot at it. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Jacek Lawrynowicz
|
338c3149a2 |
PCI: Add support for multiple DMA aliases
Solve IOMMU support issues with PCIe non-transparent bridges that use Requester ID look-up tables (RID-LUT), e.g., the PEX8733. The NTB connects devices in two independent PCI domains. Devices separated by the NTB are not able to discover each other. A PCI packet being forwared from one domain to another has to have its RID modified so it appears on correct bus and completions are forwarded back to the original domain through the NTB. The RID is translated using a preprogrammed table (LUT) and the PCI packet propagates upstream away from the NTB. If the destination system has IOMMU enabled, the packet will be discarded because the new RID is unknown to the IOMMU. Adding a DMA alias for the new RID allows IOMMU to properly recognize the packet. Each device behind the NTB has a unique RID assigned in the RID-LUT. The current DMA alias implementation supports only a single alias, so it's not possible to support mutiple devices behind the NTB when IOMMU is enabled. Enable all possible aliases on a given bus (256) that are stored in a bitset. Alias devfn is directly translated to a bit number. The bitset is not allocated for devices that have no need for DMA aliases. More details can be found in the following article: http://www.plxtech.com/files/pdf/technical/expresslane/RTC_Enabling%20MulitHostSystemDesigns.pdf Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Joerg Roedel <jroedel@suse.de> |
||
Bjorn Helgaas
|
48c830809c |
PCI: Move informational printk to pci_add_dma_alias()
One of the quirks that adds DMA aliases logs an informational message in dmesg. Move that to pci_add_dma_alias() so all users log the message consistently. No functional change intended (except extra message). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> |
||
Bjorn Helgaas
|
f0af959337 |
PCI: Add pci_add_dma_alias() to abstract implementation
Add a pci_add_dma_alias() interface to encapsulate the details of adding an alias. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> |
||
Colin Ian King
|
dcbb408ac5 |
PCI: Fix spelling errors
Fix spelling of "initalization". [bhelgaas: also fix pci/pci.c] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Linus Torvalds
|
63e30271b0 |
PCI changes for the v4.6 merge window:
Enumeration Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas) Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas Resource management Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas) Don't assign or reassign immutable resources (Bjorn Helgaas) Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas) Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas) Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas) ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas) ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas) Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas) rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) Virtualization Wait for up to 1000ms after FLR reset (Alex Williamson) Support SR-IOV on any function type (Kelly Zytaruk) Add ACS quirk for all Cavium devices (Manish Jaggi) AER Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas) Restore pci_ops pointer while calling original pci_ops (David Daney) Fix aer_inject error codes (Jean Delvare) Use dev_warn() in aer_inject (Jean Delvare) Log actual error causes in aer_inject (Jean Delvare) Log aer_inject error injections (Jean Delvare) VPD Prevent VPD access for buggy devices (Babu Moger) Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas) Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas) Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas) Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas) Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas) Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas) Update VPD definitions (Hannes Reinecke) Allow access to VPD attributes with size 0 (Hannes Reinecke) Determine actual VPD size on first access (Hannes Reinecke) Generic host bridge driver Move structure definitions to separate header file (David Daney) Add pci_host_common_probe(), based on gen_pci_probe() (David Daney) Expose pci_host_common_probe() for use by other drivers (David Daney) Altera host bridge driver Fix altera_pcie_link_is_up() (Ley Foon Tan) Cavium ThunderX host bridge driver Add PCIe host driver for ThunderX processors (David Daney) Add driver for ThunderX-pass{1,2} on-chip devices (David Daney) Freescale i.MX6 host bridge driver Add DT bindings to configure PHY Tx driver settings (Justin Waters) Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach) Move PHY reset into imx6_pcie_establish_link() (Lucas Stach) Remove broken Gen2 workaround (Lucas Stach) Move link up check into imx6_pcie_wait_for_link() (Lucas Stach) Freescale Layerscape host bridge driver Add "fsl,ls2085a-pcie" compatible ID (Yang Shi) Intel VMD host bridge driver Attach VMD resources to parent domain's resource tree (Jon Derrick) Set bus resource start to 0 (Keith Busch) Microsoft Hyper-V host bridge driver Add fwnode_handle to x86 pci_sysdata (Jake Oshins) Look up IRQ domain by fwnode_handle (Jake Oshins) Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins) NVIDIA Tegra host bridge driver Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding) Implement ->{add,remove}_bus() callbacks (Thierry Reding) Remove unused struct tegra_pcie.num_ports field (Thierry Reding) Track bus -> CPU mapping (Thierry Reding) Remove misleading PHYS_OFFSET (Thierry Reding) Renesas R-Car host bridge driver Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman) Synopsys DesignWare host bridge driver ARC: Add PCI support (Joao Pinto) Add generic dw_pcie_wait_for_link() (Joao Pinto) Add default link up check if sub-driver doesn't override (Joao Pinto) Add driver for prototyping kits based on ARC SDP (Joao Pinto) TI Keystone host bridge driver Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin) Xilinx AXI host bridge driver Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada) Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada) Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada) Update Zynq binding with Microblaze node (Bharat Kumar Gogada) microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada) Xilinx NWL host bridge driver Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada) Miscellaneous Check device_attach() return value always (Bjorn Helgaas) Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas) Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas) ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas) Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas) Remove includes of asm/pci-bridge.h (Bjorn Helgaas) Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas) unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas) Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler) Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas) Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa) frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig) Move pci_dma_* helpers to common code (Christoph Hellwig) Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus) Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson) Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW6XgMAAoJEFmIoMA60/r8Yq4P/1nNwwZPikU+9Z8k0HyGPll6 vqXBOYj/wlbAxJTzH2weaoyUamFrwvsKaO3Vap3xHkAeTFPD/Dp0TipCCNMrZ82Z j1y83JJpenkRyX6ifLARCNYpOtvnvgzSrO9x7Sb2Xfqb64dPb7+jGAfOpGNzhKsO n1nj/L7RGx8Q6fNFGf8ANMXKTsdkdL+1pdwegjUXmD5WdOT+oW8DmqVbhyfSKwl0 E8r4Ml2lIg7Qd5Wu5iKMIBsR0+5HEyrwV7ch92wXChwKfoRwG70qnn7FGdc0y5ZB XvJuj8UD5UeMxEUeoRa9SwU6wWQT3Q9e6BzMS+P+43z36SPYjMfy/Xffv054z/bY rQomLjuGxNLESpmfNK5JfKxWoe2YNXjHQIDWMrAHyNlwdKJbYiwPcxnZJhvOa/eB p0QYcGS7O43STjibG9PZhzeq8tuSJRshxi0W6iB9QlqO8qs8nJQxIO+sZj/vl4yz lSnswWcV9062KITl8Fe9xDw244/RTz1xSVCdldlSoDhJyeMOjRvzS8raUMyyVmbA YULsI3l2iCl+fwDm/T21o7hJG966oYdAmgEv7lc7BWfgEAMg//LZXvMzVvrPFB2D R77u/0idtOciVJrmnO/x9DnQO2hzro9SLmVH6m0+0YU4wSSpZfGn98PCrtkatOAU c8zT9dJgyJVE3Z7cnPJ4 =otsF -----END PGP SIGNATURE----- Merge tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for v4.6: Enumeration: - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas) - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas Resource management: - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas) - Don't assign or reassign immutable resources (Bjorn Helgaas) - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas) - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas) - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas) - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas) - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas) - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas) - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) Virtualization: - Wait for up to 1000ms after FLR reset (Alex Williamson) - Support SR-IOV on any function type (Kelly Zytaruk) - Add ACS quirk for all Cavium devices (Manish Jaggi) AER: - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas) - Restore pci_ops pointer while calling original pci_ops (David Daney) - Fix aer_inject error codes (Jean Delvare) - Use dev_warn() in aer_inject (Jean Delvare) - Log actual error causes in aer_inject (Jean Delvare) - Log aer_inject error injections (Jean Delvare) VPD: - Prevent VPD access for buggy devices (Babu Moger) - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas) - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas) - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas) - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas) - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas) - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas) - Update VPD definitions (Hannes Reinecke) - Allow access to VPD attributes with size 0 (Hannes Reinecke) - Determine actual VPD size on first access (Hannes Reinecke) Generic host bridge driver: - Move structure definitions to separate header file (David Daney) - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney) - Expose pci_host_common_probe() for use by other drivers (David Daney) Altera host bridge driver: - Fix altera_pcie_link_is_up() (Ley Foon Tan) Cavium ThunderX host bridge driver: - Add PCIe host driver for ThunderX processors (David Daney) - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney) Freescale i.MX6 host bridge driver: - Add DT bindings to configure PHY Tx driver settings (Justin Waters) - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach) - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach) - Remove broken Gen2 workaround (Lucas Stach) - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach) Freescale Layerscape host bridge driver: - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi) Intel VMD host bridge driver: - Attach VMD resources to parent domain's resource tree (Jon Derrick) - Set bus resource start to 0 (Keith Busch) Microsoft Hyper-V host bridge driver: - Add fwnode_handle to x86 pci_sysdata (Jake Oshins) - Look up IRQ domain by fwnode_handle (Jake Oshins) - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins) NVIDIA Tegra host bridge driver: - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding) - Implement ->{add,remove}_bus() callbacks (Thierry Reding) - Remove unused struct tegra_pcie.num_ports field (Thierry Reding) - Track bus -> CPU mapping (Thierry Reding) - Remove misleading PHYS_OFFSET (Thierry Reding) Renesas R-Car host bridge driver: - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman) Synopsys DesignWare host bridge driver: - ARC: Add PCI support (Joao Pinto) - Add generic dw_pcie_wait_for_link() (Joao Pinto) - Add default link up check if sub-driver doesn't override (Joao Pinto) - Add driver for prototyping kits based on ARC SDP (Joao Pinto) TI Keystone host bridge driver: - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin) Xilinx AXI host bridge driver: - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada) - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada) - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada) - Update Zynq binding with Microblaze node (Bharat Kumar Gogada) - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada) Xilinx NWL host bridge driver: - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada) Miscellaneous: - Check device_attach() return value always (Bjorn Helgaas) - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas) - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas) - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove includes of asm/pci-bridge.h (Bjorn Helgaas) - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas) - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas) - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler) - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas) - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa) - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig) - Move pci_dma_* helpers to common code (Christoph Hellwig) - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus) - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson) - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)" * tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition PCI: designware: Add driver for prototyping kits based on ARC SDP PCI: designware: Add default link up check if sub-driver doesn't override PCI: designware: Add generic dw_pcie_wait_for_link() PCI: Cleanup pci/pcie/Kconfig whitespace PCI: Simplify pci_create_attr() control flow PCI: Don't leak memory if sysfs_create_bin_file() fails PCI: Simplify sysfs ROM cleanup PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource MIPS: Loongson 3: Use temporary struct resource * to avoid repetition ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource ia64/PCI: Use ioremap() instead of open-coded equivalent ia64/PCI: Use temporary struct resource * to avoid repetition PCI: Clean up pci_map_rom() whitespace PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices PCI: thunder: Add PCIe host driver for ThunderX processors PCI: generic: Expose pci_host_common_probe() for use by other drivers PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe() ... |
||
Bjorn Helgaas
|
18e5e6913b |
Merge branches 'pci/aer', 'pci/enumeration', 'pci/kconfig', 'pci/misc', 'pci/virtualization' and 'pci/vpd' into next
* pci/aer: PCI/AER: Log aer_inject error injections PCI/AER: Log actual error causes in aer_inject PCI/AER: Use dev_warn() in aer_inject PCI/AER: Fix aer_inject error codes * pci/enumeration: PCI: Fix broken URL for Dell biosdevname * pci/kconfig: PCI: Cleanup pci/pcie/Kconfig whitespace PCI: Include pci/hotplug Kconfig directly from pci/Kconfig PCI: Include pci/pcie/Kconfig directly from pci/Kconfig * pci/misc: PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition PCI: Add QEMU top-level IDs for (sub)vendor & device unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition PCI: Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h PCI: Move pci_dma_* helpers to common code frv/PCI: Remove stray pci_{alloc,free}_consistent() declaration * pci/virtualization: PCI: Wait for up to 1000ms after FLR reset PCI: Support SR-IOV on any function type * pci/vpd: PCI: Prevent VPD access for buggy devices PCI: Sleep rather than busy-wait for VPD access completion PCI: Fold struct pci_vpd_pci22 into struct pci_vpd PCI: Rename VPD symbols to remove unnecessary "pci22" PCI: Remove struct pci_vpd_ops.release function pointer PCI: Move pci_vpd_release() from header file to pci/access.c PCI: Move pci_read_vpd() and pci_write_vpd() close to other VPD code PCI: Determine actual VPD size on first access PCI: Use bitfield instead of bool for struct pci_vpd_pci22.busy PCI: Allow access to VPD attributes with size 0 PCI: Update VPD definitions |
||
Alex Williamson
|
5adecf817d |
PCI: Wait for up to 1000ms after FLR reset
Some devices take longer than the spec indicates to return from FLR reset, a notable case of this is Intel integrated graphics (IGD), which can often take an additional 300ms powering down an attached LCD panel as part of the FLR. Allow devices up to 1000ms, testing every 100ms whether the second dword of config space is read as -1. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Krzysztof =?utf-8?Q?Ha=C5=82asa?=
|
54c6e2dd00 |
PCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr()
pci_create_root_bus() passes a "parent" pointer to pci_bus_assign_domain_nr(). When CONFIG_PCI_DOMAINS_GENERIC is defined, pci_bus_assign_domain_nr() dereferences that pointer. Many callers of pci_create_root_bus() supply a NULL "parent" pointer, which leads to a NULL pointer dereference error. |
||
Bjorn Helgaas
|
fe537670ea |
PCI: Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h
Christoph added a generic include/linux/pci-dma-compat.h, so now there's one place with most of the PCI DMA interfaces. Move more PCI DMA-related things there: - The PCI_DMA_* direction constants from linux/pci.h - The pci_set_dma_max_seg_size() and pci_set_dma_seg_boundary() CONFIG_PCI implementations from drivers/pci/pci.c - The pci_set_dma_max_seg_size() and pci_set_dma_seg_boundary() !CONFIG_PCI stubs from linux/pci.h - The pci_set_dma_mask() and pci_set_consistent_dma_mask() !CONFIG_PCI stubs from linux/pci.h Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Bjorn Helgaas
|
5bd28338d6 |
PCI: Remove includes of empty asm-generic/pci-bridge.h
include/asm-generic/pci-bridge.h is now empty, so remove every #include of it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Will Deacon <will.deacon@arm.com> (arm64) |
||
Linus Torvalds
|
d43421565b |
PCI changes for the v4.5 merge window:
Enumeration Simplify config space size computation (Bjorn Helgaas) Avoid iterating through ROM outside the resource window (Edward O'Callaghan) Support PCIe devices with short cfg_size (Jason S. McMullan) Add Netronome vendor and device IDs (Jason S. McMullan) Limit config space size for Netronome NFP6000 family (Jason S. McMullan) Add Netronome NFP4000 PF device ID (Simon Horman) Limit config space size for Netronome NFP4000 (Simon Horman) Print warnings for all invalid expansion ROM headers (Vladis Dronov) Resource management Fix minimum allocation address overwrite (Christoph Biedl) PCI device hotplug acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King) pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck) shpchp: Constify hpc_ops structure (Julia Lawall) ibmphp: Remove unneeded NULL test (Julia Lawall) Power management Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski) Virtualization Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander) MSI Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas) Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko) Initialize MSI capability for all architectures (Guilherme G. Piccoli) Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang) ARM Versatile host bridge driver Remove unused pci_sys_data structures (Lorenzo Pieralisi) Broadcom iProc host bridge driver Hide CONFIG_PCIE_IPROC (Arnd Bergmann) Do not use 0x in front of %pap (Dmitry V. Krivenok) Update iProc PCIe device tree binding (Ray Jui) Add PAXC interface support (Ray Jui) Add iProc PCIe MSI device tree binding (Ray Jui) Add iProc PCIe MSI support (Ray Jui) Freescale i.MX6 host bridge driver Use gpio_set_value_cansleep() (Fabio Estevam) Add support for active-low reset GPIO (Petr Štetiar) HiSilicon host bridge driver Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni) Intel VMD host bridge driver Export irq_domain_set_info() for module use (Keith Busch) x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch) Use 32 bit PCI domain numbers (Keith Busch) Add driver for Intel Volume Management Device (VMD) (Keith Busch) Qualcomm host bridge driver Document PCIe devicetree bindings (Stanimir Varbanov) Add Qualcomm PCIe controller driver (Stanimir Varbanov) dts: apq8064: add PCIe devicetree node (Stanimir Varbanov) dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov) Renesas R-Car host bridge driver Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa) Allow DT to override default window settings (Phil Edworthy) Convert to DT resource parsing API (Phil Edworthy) Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy) Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy) Add runtime PM support to pcie-rcar (Phil Edworthy) Add Gen2 PHY setup to pcie-rcar (Phil Edworthy) Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman) Add gen2 fallback compatibility string for pcie-rcar (Simon Horman) Synopsys DesignWare host bridge driver Simplify control flow (Bjorn Helgaas) Make config accessor override checking symmetric (Bjorn Helgaas) Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov) Miscellaneous Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann) Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas) Fix all whitespace issues (Bogicevic Sasa) x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang) Use to_pci_dev() instead of open-coding it (Geliang Tang) Use kobj_to_dev() instead of open-coding it (Geliang Tang) Use list_for_each_entry() to simplify code (Geliang Tang) Fix typos in <linux/msi.h> (Thomas Petazzoni) x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWoQIuAAoJEFmIoMA60/r8ckYP/0ZrkANeN1SB5cQVi2k7aceq kQb1Hk6ifxohJvgpJ/iwmVCHoApyeBfUBfrC+fUpIC2f7ncPsE5HNyjqpAWzFzj2 sYWwY029yjBQ9g4mPhkvjBXfha+lNtLthWc+Xxcat5pdcyG63Dg4SfJKWm2ZYnbN 0GJzyRZXIwAMnNf0KIr61Aqru0nXeHvi5wblyJ08UZ7AcNzCtB0wKLmE3S6SeZVF f2fry35zcGu+TFvQ1hAYemfl3XyDBJ87nPiKzJAwYSaKcWPFWt+72PBDPO6X9squ 6prm4nmAgeG2Oo4Zu0fbkDlB2bEsWUc14/xT0i5Wfs35vcwzF+S1zirJAtVqoNir NgC7fSbEHbsS7FZOz0rBOBIvIkbb6NdfLFuZqUFv0X1M5bRFywjo8lZRfAYoGJzK Mmus0uKbklx5m6RT5adf9+Plev1YJT6XZW9XrDpGnxrwRyPjHmyvuTWsYkumxY7Q CE5Wr3p7q2I2+MtrQVv2D9Nzsb+4zQ6BgHrd2vwR/IxTsfdXLU7+B691wkUDX8No UKFxBd0FiVCn+srG96u7lWQvdoUqoNCogTZSVzGR5gFBv3zAN9gi8HS7NbV558Mg Io3Xw+6dcbG33uvWdU6jHEDLMQsohZcp05Q5esCgRQNV4cGJbPxBDtOZEO/ezvW4 FAI7lfgYTFiQK3NzE3Ng =z9mQ -----END PGP SIGNATURE----- Merge tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.5 merge window: Enumeration: - Simplify config space size computation (Bjorn Helgaas) - Avoid iterating through ROM outside the resource window (Edward O'Callaghan) - Support PCIe devices with short cfg_size (Jason S. McMullan) - Add Netronome vendor and device IDs (Jason S. McMullan) - Limit config space size for Netronome NFP6000 family (Jason S. McMullan) - Add Netronome NFP4000 PF device ID (Simon Horman) - Limit config space size for Netronome NFP4000 (Simon Horman) - Print warnings for all invalid expansion ROM headers (Vladis Dronov) Resource management: - Fix minimum allocation address overwrite (Christoph Biedl) PCI device hotplug: - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King) - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck) - shpchp: Constify hpc_ops structure (Julia Lawall) - ibmphp: Remove unneeded NULL test (Julia Lawall) Power management: - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski) Virtualization - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander) MSI: - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas) - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko) - Initialize MSI capability for all architectures (Guilherme G. Piccoli) - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang) ARM Versatile host bridge driver: - Remove unused pci_sys_data structures (Lorenzo Pieralisi) Broadcom iProc host bridge driver: - Hide CONFIG_PCIE_IPROC (Arnd Bergmann) - Do not use 0x in front of %pap (Dmitry V. Krivenok) - Update iProc PCIe device tree binding (Ray Jui) - Add PAXC interface support (Ray Jui) - Add iProc PCIe MSI device tree binding (Ray Jui) - Add iProc PCIe MSI support (Ray Jui) Freescale i.MX6 host bridge driver: - Use gpio_set_value_cansleep() (Fabio Estevam) - Add support for active-low reset GPIO (Petr Štetiar) HiSilicon host bridge driver: - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni) Intel VMD host bridge driver: - Export irq_domain_set_info() for module use (Keith Busch) - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch) - Use 32 bit PCI domain numbers (Keith Busch) - Add driver for Intel Volume Management Device (VMD) (Keith Busch) Qualcomm host bridge driver: - Document PCIe devicetree bindings (Stanimir Varbanov) - Add Qualcomm PCIe controller driver (Stanimir Varbanov) - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov) - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov) Renesas R-Car host bridge driver: - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa) - Allow DT to override default window settings (Phil Edworthy) - Convert to DT resource parsing API (Phil Edworthy) - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy) - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy) - Add runtime PM support to pcie-rcar (Phil Edworthy) - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy) - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman) - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman) Synopsys DesignWare host bridge driver: - Simplify control flow (Bjorn Helgaas) - Make config accessor override checking symmetric (Bjorn Helgaas) - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov) Miscellaneous: - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann) - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas) - Fix all whitespace issues (Bogicevic Sasa) - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang) - Use to_pci_dev() instead of open-coding it (Geliang Tang) - Use kobj_to_dev() instead of open-coding it (Geliang Tang) - Use list_for_each_entry() to simplify code (Geliang Tang) - Fix typos in <linux/msi.h> (Thomas Petazzoni) - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)" * tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits) PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 PCI: Limit config space size for Netronome NFP4000 PCI: Add Netronome NFP4000 PF device ID x86/PCI: Add driver for Intel Volume Management Device (VMD) PCI/AER: Use 32 bit PCI domain numbers x86/PCI: Allow DMA ops specific to a PCI domain irqdomain: Export irq_domain_set_info() for module use PCI: host: Add of_pci_get_host_bridge_resources() stub genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains PCI: rcar: Add Gen2 PHY setup to pcie-rcar PCI: rcar: Add runtime PM support to pcie-rcar PCI: designware: Make config accessor override checking symmetric PCI: ibmphp: Remove unneeded NULL test ARM: dts: ifc6410: enable PCIe DT node for this board ARM: dts: apq8064: add PCIe devicetree node PCI: hotplug: Use list_for_each_entry() to simplify code PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers PCI: Avoid iterating through memory outside the resource window PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot ... |
||
Geliang Tang
|
f3d2f1655b |
PCI: Use to_pci_dev() instead of open-coding it
Use to_pci_dev() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Bogicevic Sasa
|
ff3ce480e8 |
PCI: Fix all whitespace issues
Fix all whitespace issues (missing or needed whitespace) in all files in drivers/pci. Code is compiled with allyesconfig before and after code changes and objects are recorded and checked with objdiff and they are not changed after this commit. Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Julia Lawall
|
299f2ffed3 |
PCI / PM: constify pci_platform_pm_ops structure
The pci_platform_pm_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Linus Torvalds
|
3c87b79188 |
PCI changes for the v4.4 merge window:
Resource management Add support for Enhanced Allocation devices (Sean O. Stalley) Add Enhanced Allocation register entries (Sean O. Stalley) Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney) Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney) Handle Enhanced Allocation capability for SR-IOV devices (David Daney) Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas) Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas) Expand Enhanced Allocation BAR output (Bjorn Helgaas) Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier) Fix lookup of linux,pci-probe-only property (Marc Zyngier) Add sparc mem64 resource parsing for root bus (Yinghai Lu) PCI device hotplug pciehp: Queue power work requests in dedicated function (Guenter Roeck) Driver binding Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker) Virtualization Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck) Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck) Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck) Reorder pcibios_sriov_disable() (Alexander Duyck) Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck) Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck) Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton) Don't try to restore VF BARs (Wei Yang) MSI Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel) Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach) Export all remapped MSIs to sysfs attributes (Romain Bezut) Disable MSI on SiS 761 (Ondrej Zary) AER Clear error status registers during enumeration and restore (Taku Izumi) Generic host bridge driver Fix lookup of linux,pci-probe-only property (Marc Zyngier) Allow multiple hosts with different map_bus() methods (David Daney) Pass starting bus number to pci_scan_root_bus() (David Daney) Fix address window calculation for non-zero starting bus (David Daney) Altera host bridge driver Add msi.h to ARM Kbuild (Ley Foon Tan) Add Altera PCIe host controller driver (Ley Foon Tan) Add Altera PCIe MSI driver (Ley Foon Tan) APM X-Gene host bridge driver Remove msi_controller assignment (Duc Dang) Broadcom iProc host bridge driver Fix header comment "Corporation" misspelling (Florian Fainelli) Fix code comment to match code (Ray Jui) Remove unused struct iproc_pcie.irqs[] (Ray Jui) Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui) Fix PCIe reset logic (Ray Jui) Improve link detection logic (Ray Jui) Update PCIe device tree bindings (Ray Jui) Add outbound mapping support (Ray Jui) Freescale i.MX6 host bridge driver Return real error code from imx6_add_pcie_port() (Fabio Estevam) Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam) Freescale Layerscape host bridge driver Remove ls_pcie_establish_link() (Minghuan Lian) Ignore PCIe controllers in Endpoint mode (Minghuan Lian) Factor out SCFG related function (Minghuan Lian) Update ls_add_pcie_port() (Minghuan Lian) Remove unused fields from struct ls_pcie (Minghuan Lian) Add support for LS1043a and LS2080a (Minghuan Lian) Add ls_pcie_msi_host_init() (Minghuan Lian) HiSilicon host bridge driver Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang) Marvell MVEBU host bridge driver Return zero for reserved or unimplemented config space (Russell King) Use exact config access size; don't read/modify/write (Russell King) Use of_get_available_child_count() (Russell King) Use for_each_available_child_of_node() to walk child nodes (Russell King) Report full node name when reporting a DT error (Russell King) Use port->name rather than "PCIe%d.%d" (Russell King) Move port parsing and resource claiming to separate function (Russell King) Fix memory leaks and refcount leaks (Russell King) Split port parsing and resource claiming from port setup (Russell King) Use gpio_set_value_cansleep() (Russell King) Use devm_kcalloc() to allocate an array (Russell King) Use gpio_desc to carry around gpio (Russell King) Improve clock/reset handling (Russell King) Add PCI Express root complex capability block (Russell King) Remove code restricting accesses to slot 0 (Russell King) NVIDIA Tegra host bridge driver Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel) Renesas R-Car host bridge driver Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven) Build pcie-rcar.c only on ARM (Geert Uytterhoeven) Make PCI aware of the I/O resources (Phil Edworthy) Remove dependency on ARM-specific struct hw_pci (Phil Edworthy) Set root bus nr to that provided in DT (Phil Edworthy) Fix I/O offset for multiple host bridges (Phil Edworthy) ST Microelectronics SPEAr13xx host bridge driver Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni) Synopsys DesignWare host bridge driver Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma) Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni) Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni) Require config accesses to be naturally aligned (Gabriele Paoloni) Make "num-lanes" an optional DT property (Gabriele Paoloni) Move calculation of bus addresses to DRA7xx (Gabriele Paoloni) Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni) Factor out MSI msg setup (Lucas Stach) Implement multivector MSI IRQ setup (Lucas Stach) Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach) Set up high part of MSI target address (Lucas Stach) Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang) Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang) Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang) Make driver arch-agnostic (Zhou Wang) Miscellaneous Make x86 pci_subsys_init() static (Alexander Kuleshov) Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWPM9aAAoJEFmIoMA60/r89f8QALFMHegqKk5M08ZcCaG7unLF 5U5t88y6KF/kNYF6HOqLQiHh79U3ToU5HdrNaAtutr0UnvgbFC2WulLqKYgLiq6Y YJnwR3EfgGmdG7DKAVAXq19+nc2hgTPAEe8sciU7HKlTbqQmGj6//y3sQULGNLx3 zur0C33DCtrDgKDP7to273lkHO8Vl0YuLzyqwt0ePCMNcXR0h1dK8QxSTjuXBxaR c+T1V1Hw64MTxLz3xJd1/1ipy32u+9LnqqcdRz0zRq6qi48G9ch/i4Z6DHa8kTbj DUZrrTYKILQ2TcjcZSBmTueX11Z1Xa4/I/45sehIi6gVWL9qQbmGpt2E5YtFED+4 GdcmBSbWG/qsNsabXk38uiM3ww7+ltXEOhTXbcK+EgjvIhE6gSK/plYG0fU9pybs AKViEXVdHoT1X0N1dLK12mq7kvDCQvShHn08lz97Q9YrZ32wv1Fnij6WVSbJvfWt DubtPtisVM+rVy+VTpOImNR9wO54lTmG5jK53yNqH7I20K89y1kqARlN9nMXMB1a 2nQnwe9yWlsGj9gVNCn1KmyQSPOWjg+3Z+ekfwbxpca14s1AaN3Jm0N9Z61dXFoF y2ygoQtZ/z9BHr3quBpxXGt+aVUg2kcNw5GYeDYiALxXdJSObyzRrZ6HDb/zicU2 ZH9hBj0ctXvucmy6I2mt =uZrt -----END PGP SIGNATURE----- Merge tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Resource management: - Add support for Enhanced Allocation devices (Sean O. Stalley) - Add Enhanced Allocation register entries (Sean O. Stalley) - Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney) - Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney) - Handle Enhanced Allocation capability for SR-IOV devices (David Daney) - Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas) - Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas) - Expand Enhanced Allocation BAR output (Bjorn Helgaas) - Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier) - Fix lookup of linux,pci-probe-only property (Marc Zyngier) - Add sparc mem64 resource parsing for root bus (Yinghai Lu) PCI device hotplug: - pciehp: Queue power work requests in dedicated function (Guenter Roeck) Driver binding: - Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker) Virtualization: - Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck) - Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck) - Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck) - Reorder pcibios_sriov_disable() (Alexander Duyck) - Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck) - Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck) - Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton) - Don't try to restore VF BARs (Wei Yang) MSI: - Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel) - Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach) - Export all remapped MSIs to sysfs attributes (Romain Bezut) - Disable MSI on SiS 761 (Ondrej Zary) AER: - Clear error status registers during enumeration and restore (Taku Izumi) Generic host bridge driver: - Fix lookup of linux,pci-probe-only property (Marc Zyngier) - Allow multiple hosts with different map_bus() methods (David Daney) - Pass starting bus number to pci_scan_root_bus() (David Daney) - Fix address window calculation for non-zero starting bus (David Daney) Altera host bridge driver: - Add msi.h to ARM Kbuild (Ley Foon Tan) - Add Altera PCIe host controller driver (Ley Foon Tan) - Add Altera PCIe MSI driver (Ley Foon Tan) APM X-Gene host bridge driver: - Remove msi_controller assignment (Duc Dang) Broadcom iProc host bridge driver: - Fix header comment "Corporation" misspelling (Florian Fainelli) - Fix code comment to match code (Ray Jui) - Remove unused struct iproc_pcie.irqs[] (Ray Jui) - Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui) - Fix PCIe reset logic (Ray Jui) - Improve link detection logic (Ray Jui) - Update PCIe device tree bindings (Ray Jui) - Add outbound mapping support (Ray Jui) Freescale i.MX6 host bridge driver: - Return real error code from imx6_add_pcie_port() (Fabio Estevam) - Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam) Freescale Layerscape host bridge driver: - Remove ls_pcie_establish_link() (Minghuan Lian) - Ignore PCIe controllers in Endpoint mode (Minghuan Lian) - Factor out SCFG related function (Minghuan Lian) - Update ls_add_pcie_port() (Minghuan Lian) - Remove unused fields from struct ls_pcie (Minghuan Lian) - Add support for LS1043a and LS2080a (Minghuan Lian) - Add ls_pcie_msi_host_init() (Minghuan Lian) HiSilicon host bridge driver: - Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang) Marvell MVEBU host bridge driver: - Return zero for reserved or unimplemented config space (Russell King) - Use exact config access size; don't read/modify/write (Russell King) - Use of_get_available_child_count() (Russell King) - Use for_each_available_child_of_node() to walk child nodes (Russell King) - Report full node name when reporting a DT error (Russell King) - Use port->name rather than "PCIe%d.%d" (Russell King) - Move port parsing and resource claiming to separate function (Russell King) - Fix memory leaks and refcount leaks (Russell King) - Split port parsing and resource claiming from port setup (Russell King) - Use gpio_set_value_cansleep() (Russell King) - Use devm_kcalloc() to allocate an array (Russell King) - Use gpio_desc to carry around gpio (Russell King) - Improve clock/reset handling (Russell King) - Add PCI Express root complex capability block (Russell King) - Remove code restricting accesses to slot 0 (Russell King) NVIDIA Tegra host bridge driver: - Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel) Renesas R-Car host bridge driver: - Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven) - Build pcie-rcar.c only on ARM (Geert Uytterhoeven) - Make PCI aware of the I/O resources (Phil Edworthy) - Remove dependency on ARM-specific struct hw_pci (Phil Edworthy) - Set root bus nr to that provided in DT (Phil Edworthy) - Fix I/O offset for multiple host bridges (Phil Edworthy) ST Microelectronics SPEAr13xx host bridge driver: - Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni) Synopsys DesignWare host bridge driver: - Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma) - Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni) - Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni) - Require config accesses to be naturally aligned (Gabriele Paoloni) - Make "num-lanes" an optional DT property (Gabriele Paoloni) - Move calculation of bus addresses to DRA7xx (Gabriele Paoloni) - Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni) - Factor out MSI msg setup (Lucas Stach) - Implement multivector MSI IRQ setup (Lucas Stach) - Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach) - Set up high part of MSI target address (Lucas Stach) - Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang) - Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang) - Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang) - Make driver arch-agnostic (Zhou Wang) Miscellaneous: - Make x86 pci_subsys_init() static (Alexander Kuleshov) - Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)" * tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: altera: Add Altera PCIe MSI driver PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver PCI: layerscape: Add ls_pcie_msi_host_init() PCI: layerscape: Add support for LS1043a and LS2080a PCI: layerscape: Remove unused fields from struct ls_pcie PCI: layerscape: Update ls_add_pcie_port() PCI: layerscape: Factor out SCFG related function PCI: layerscape: Ignore PCIe controllers in Endpoint mode PCI: layerscape: Remove ls_pcie_establish_link() PCI: designware: Make "clocks" and "clock-names" optional DT properties PCI: designware: Make driver arch-agnostic ARM/PCI: Replace pci_sys_data->align_resource with global function pointer PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT Revert "PCI: designware: Program ATU with untranslated address" PCI: designware: Move calculation of bus addresses to DRA7xx PCI: designware: Make "num-lanes" an optional DT property PCI: designware: Require config accesses to be naturally aligned PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces PCI: designware: Use exact access size in dw_pcie_cfg_read() PCI: spear: Fix dw_pcie_cfg_read/write() usage ... |
||
Bjorn Helgaas
|
1f9a30ec2a |
Merge branches 'pci/aer', 'pci/hotplug', 'pci/misc', 'pci/msi', 'pci/resource' and 'pci/virtualization' into next
* pci/aer: PCI/AER: Clear error status registers during enumeration and restore * pci/hotplug: PCI: pciehp: Queue power work requests in dedicated function * pci/misc: PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum x86/PCI: Make pci_subsys_init() static PCI: Add builtin_pci_driver() to avoid registration boilerplate PCI: Remove unnecessary "if" statement * pci/msi: x86/PCI: Don't alloc pcibios-irq when MSI is enabled PCI/MSI: Export all remapped MSIs to sysfs attributes PCI: Disable MSI on SiS 761 * pci/resource: sparc/PCI: Add mem64 resource parsing for root bus PCI: Expand Enhanced Allocation BAR output PCI: Make Enhanced Allocation bitmasks more obvious PCI: Handle Enhanced Allocation capability for SR-IOV devices PCI: Add support for Enhanced Allocation devices PCI: Add Enhanced Allocation register entries PCI: Handle IORESOURCE_PCI_FIXED when assigning resources PCI: Handle IORESOURCE_PCI_FIXED when sizing resources PCI: Clear IORESOURCE_UNSET when reverting to firmware-assigned address * pci/virtualization: PCI: Fix sriov_enable() error path for pcibios_enable_sriov() failures PCI: Wait 1 second between disabling VFs and clearing NumVFs PCI: Reorder pcibios_sriov_disable() PCI: Remove VFs in reverse order if virtfn_add() fails PCI: Remove redundant validation of SR-IOV offset/stride registers PCI: Set SR-IOV NumVFs to zero after enumeration PCI: Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs PCI: Don't try to restore VF BARs |
||
Bjorn Helgaas
|
597becb4ad |
PCI: Expand Enhanced Allocation BAR output
An Enhanced Allocation Capability entry with BEI 0 fills in dev->resource[0] just like a real BAR 0 would, but non-EA experts might not connect "EA - BEI 0" with BAR 0. Decode the EA jargon a little bit, e.g., change this: pci 0002:01:00.0: EA - BEI 0, Prop 0x00: [mem 0x84300000-0x84303fff] to this: pci 0002:01:00.0: BAR 0: [mem 0x84300000-0x84303fff] (from Enhanced Allocation, properties 0x00) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Bjorn Helgaas
|
26635112d4 |
PCI: Make Enhanced Allocation bitmasks more obvious
Expand bitmask #defines completely. This puts the shift in the code instead of in the #define, but it makes it more obvious in the header file how fields in the register are laid out. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
David Daney
|
111839917f |
PCI: Handle Enhanced Allocation capability for SR-IOV devices
SR-IOV BARs can be specified via EA entries. Extend the EA parser to extract the SRIOV BAR resources, and modify sriov_init() to use resources previously obtained via EA. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sean O. Stalley <sean.stalley@intel.com> |
||
Sean O. Stalley
|
938174e59f |
PCI: Add support for Enhanced Allocation devices
Add support for devices using Enhanced Allocation entries instead of BARs. This allows the kernel to parse the EA Extended Capability structure in PCI config space and claim the BAR-equivalent resources. See https://pcisig.com/sites/default/files/specification_documents/ECN_Enhanced_Allocation_23_Oct_2014_Final.pdf [bhelgaas: add spec URL, s/pci_ea_set_flags/pci_ea_flags/, consolidate declarations, print unknown property in hex to match spec] Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> [david.daney@cavium.com: Add more support/checking for Entry Properties, allow EA behind bridges, rewrite some error messages.] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Hariprasad Shenai
|
c56d4450eb |
PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum
The Chelsio T5 has a PCIe compliance erratum that causes Malformed TLP or Unexpected Completion errors in some systems, which may cause device access timeouts. Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same values for the Attribute as were supplied in the header of the corresponding Request, except as explicitly allowed when IDO is used." Instead of copying the Attributes from the Request to the Completion, the T5 always generates Completions with zero Attributes. The receiver of a Completion whose Attributes don't match the Request may accept it (which itself seems non-compliant based on sec 2.3.2), or it may handle it as a Malformed TLP or an Unexpected Completion, which will probably lead to a device access timeout. Work around this by disabling "Relaxed Ordering" and "No Snoop" in the Root Port so it always generate Requests with zero Attributes. This does affect all other devices which are downstream of that Root Port, but these are performance optimizations that should not make a functional difference. Note that Configuration Space accesses are never supposed to have TLP Attributes, so we're safe waiting till after any Configuration Space accesses to do the Root Port "fixup". Based on original work by Casey Leedom <leedom@chelsio.com> [bhelgaas: changelog, comments, rename to pci_find_pcie_root_port(), rework to use pci_upstream_bridge() and check for Root Port device type, edit diagnostics to clarify intent and devices affected] Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |