This patch deletes some unnecessary attr_mask if condition
in hip08 according to the IB protocol.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Only when the IB_QP_PATH_MTU flag of attr_mask is set
it is valid to assign the mtu field of qp context when
qp type is not GSI and UD.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
According to RoCE protocol, it is possible to
transition from error to error state for modifying
qp in hip08. This patch fix it.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
RDMA read operation is not supported inline data. If user cofigures
issue a RDMA read and use inline data, it will happen a hardware
error.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
During init hem table, type should be used instead of
table->type which is finally initializaed with type.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back). This
series addresses an IRQ performance issue (patch 1), cleanups related to
the fix for the IRQ performance problem (patches 2-6), and then extends
the fragmented completion queue support that already exists in the net
side of the driver to the ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the remaining
10 patches to the IB subsystem. This series extends the current
'representor' framework when the mlx5 driver is in switchdev mode from
being a netdev only construct to being a netdev/IB dev construct. The IB
dev is limited to raw Eth queue pairs only, but by having an IB dev of
this type attached to the representor for a switchdev port, it enables
DPDK to work on the switchdev device.
* All net related, but needed as infrastructure for the rdma driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users need to
set the port for ib_srpt to listen on in configfs in order for it to be
enabled (/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while working on new
code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device memory'
user API features
- Infrastructure updates for the new IOCTL interface, based on increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64 bit
kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Ku8g
-----END PGP SIGNATURE-----
Merge tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Doug and I are at a conference next week so if another PR is sent I
expect it to only be bug fixes. Parav noted yesterday that there are
some fringe case behavior changes in his work that he would like to
fix, and I see that Intel has a number of rc looking patches for HFI1
they posted yesterday.
Parav is again the biggest contributor by patch count with his ongoing
work to enable container support in the RDMA stack, followed by Leon
doing syzkaller inspired cleanups, though most of the actual fixing
went to RC.
There is one uncomfortable series here fixing the user ABI to actually
work as intended in 32 bit mode. There are lots of notes in the commit
messages, but the basic summary is we don't think there is an actual
32 bit kernel user of drivers/infiniband for several good reasons.
However we are seeing people want to use a 32 bit user space with 64
bit kernel, which didn't completely work today. So in fixing it we
required a 32 bit rxe user to upgrade their userspace. rxe users are
still already quite rare and we think a 32 bit one is non-existing.
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back).
This series addresses an IRQ performance issue (patch 1),
cleanups related to the fix for the IRQ performance problem
(patches 2-6), and then extends the fragmented completion queue
support that already exists in the net side of the driver to the
ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the
remaining 10 patches to the IB subsystem. This series extends
the current 'representor' framework when the mlx5 driver is in
switchdev mode from being a netdev only construct to being a
netdev/IB dev construct. The IB dev is limited to raw Eth queue
pairs only, but by having an IB dev of this type attached to the
representor for a switchdev port, it enables DPDK to work on the
switchdev device.
* All net related, but needed as infrastructure for the rdma
driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users
need to set the port for ib_srpt to listen on in configfs in order
for it to be enabled
(/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while
working on new code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from
Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device
memory' user API features
- Infrastructure updates for the new IOCTL interface, based on
increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64
bit kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them"
* tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (199 commits)
IB/rxe: Fix for oops in rxe_register_device on ppc64le arch
IB/mlx5: Device memory mr registration support
net/mlx5: Mkey creation command adjustments
IB/mlx5: Device memory support in mlx5_ib
net/mlx5: Query device memory capabilities
IB/uverbs: Add device memory registration ioctl support
IB/uverbs: Add alloc/free dm uverbs ioctl support
IB/uverbs: Add device memory capabilities reporting
IB/uverbs: Expose device memory capabilities to user
RDMA/qedr: Fix wmb usage in qedr
IB/rxe: Removed GID add/del dummy routines
RDMA/qedr: Zero stack memory before copying to user space
IB/mlx5: Add ability to hash by IPSEC_SPI when creating a TIR
IB/mlx5: Add information for querying IPsec capabilities
IB/mlx5: Add IPsec support for egress and ingress
{net,IB}/mlx5: Add ipsec helper
IB/mlx5: Add modify_flow_action_esp verb
IB/mlx5: Add implementation for create and destroy action_xfrm
IB/uverbs: Introduce ESP steering match filter
IB/uverbs: Add modify ESP flow_action
...
Now that ib_gid_attr contains device, port and index, simplify the
provider APIs add_gid() and del_gid() to use device, port and index
fields from the ib_gid_attr attributes structure.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that IB core GID cache ensures that all RoCE entries have an
associated netdev remove null checks from the provider drivers for
clarity.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_query_gid() fetches the GID from the software cache maintained in
ib_core for RoCE ports.
Therefore, simplify the provider drivers for RoCE to treat query_gid()
callback as never called for RoCE, and only require non-RoCE devices to
implement it.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current for-loop zeros variable i and only loops once, hence
not all the buffers are free'd. Fix this by setting i correctly.
Detected by CoverityScan, CID#1463415 ("Operands don't affect result")
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Upon detecting both kernel and user space support record doorbell,
the kernel needs to enable this capability in hardware by db_en,
and it should take place before cq context configuration in
hns_roce_cq_alloc. Currently, db_en is configured after cq alloc
and db_map_user has similar problem.
Reported-by: Xiping Zhang <zhangxiping3@huawei.com>
Fixes: 9b44703d0a ("RDMA/hns: Support cq record doorbell for the user space")
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extending uverbs_ioctl header with driver_id and another reserved
field. driver_id should be used in order to identify the driver.
Since every driver could have its own parsing tree, this is necessary
for strace support.
Downstream patches take off the EXPERIMENTAL flag from the ioctl() IB
support and thus we add some reserved fields for future usage.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The data in resp will be copied from kernel to userspace, thus it needs to
be initialized to zeros to avoid copying uninited stack memory.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e088a685ea ("RDMA/hns: Support rq record doorbell for the user space")
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Open coding a loose value is not acceptable for describing the uABI in
RDMA. Provide the missing struct.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch changes the type of cqn from u32 to u64 to keep
userspace and kernel consistent, initializes resp both for
cq and qp to zeros, and also changes the condition judgment
of outlen considering future caps extension.
Suggested-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes: e088a685ea (hns: Support rq record doorbell for the user space)
Fixes: 9b44703d0a (hns: Support cq record doorbell for the user space)
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch updates to support cq record doorbell for
the kernel space.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch updates to support rq record doorbell for
the kernel space.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch updates to support cq record doorbell for
the user space.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds interfaces and definitions to support the rq record
doorbell for the user space.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is no need to repeat the semantics of writel() and similar.
Moreover sparse complains about this:
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:1690:22: expected unsigned long long val
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:1690:22: got restricted __le64 <noident>
Fixing this by replacing __raw_write*(cpu_to_le*()) calls by plain
write*() ones.
Note, write*() accessors are little endian by definition.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It need to use free_pages function for free the memory allocated
by __get_free_pages function.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The QP can accept receive work requests only when the QP is
in the states that allow them to be submitted.
This patch updates the QP state judgement based on the
specification.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When modifying mac address, it will trigger hns_roce_del_gid
function and can't delete the default gid matched the index
because the attribute of gid is null.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The hip06 and hip08 run on a little endian ARM, it needs to
revise the annotations to indicate that the HW uses little
endian data in the various DMA buffers, and flow the necessary
swaps throughout.
The imm_data use big endian mode. The cpu_to_le32/le32_to_cpu
swaps are no-op for this, which makes the only substantive
change the handling of imm_data which is now mandatory swapped.
This also keep match with the userspace hns driver and resolve
the warning by sparse.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The mtt_table is cleaned up during the err_unmap_cqe label, it is a
mistake to duplicate the cleanup during the later unwind labels.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch mainly fix some style warings matched with the new checkpatch
requirement. The warning as follows:
WARNING: function definition argument 'struct hns_roce_cq *' should also have
an identifier name
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The double not-operator is unncessary when used in a boolean context. This
patch removes them.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
devm_ioremap_resource() already checks if the resource is NULL, so
remove the unnecessary platform_get_resource() error check.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch assign a guid(Global Unique identifer) value to the hip08
device.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the port is a RoCEv2 port, the remote port address and QP information
which returned for UD will be modified.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Because pkey is fixed for hip08 RoCE, it needs to assign zero for
pkey_index of wc. otherwise, it will happen an error when establishing
connection by communication management mechanism.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch mainly configure the fields of sq wqe of ud type when posting
wr of gsi qp type.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It needs to Assign the values for some fields in qp context when qp type
is gsi qp type in hip08.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The gsi qp and rc qp use the same qp context structure and the created
flow, only differentiate them by qpn and qp type.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When modifying qp from init to init, it need to assign the cqn of send cq
for tx cqn field of qp context. Otherwise, it will cause a mistake when
the send and recv cq sizes are different.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This matches the changes made recently to the userspace hns
driver when it was made sparse clean.
See rdma-core commit bffd380cfe56 ("libhns: Make the provider sparse
clean")
wc->imm_data is not used in the kernel so this change has no practical
impact.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It needs to create eight reserve QPs for resolving
a bug of hip06. When deregistering mr, it will issue
a rdma write for every reserve QPs.
When modify qp from init to rtr, it needs to set
the value of dest_qp_num. Otherwise, it will lead
an error of freeing mr.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The QP can accept send work requests only when the QP is
in the states that allow them to be submitted.
This patch updates the QP state judgement based on the
specification.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When the length of sge is zero, the driver need to filter it
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch refactors the code of setting access flags
for RDMA operation as well as adds the scene when
attr->max_dest_rd_atomic is zero.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch fixes the usage with sr_max filed and rr_max of qp
context when modify qp. Its modifications include:
1. Adjust location of filling sr_max filed of qpc
2. Only assign the number of responder resource if
IB_QP_MAX_DEST_RD_ATOMIC bit is set
3. Only assign the number of outstanding resource if
IB_QP_MAX_QP_RD_ATOMIC
4. Fix the assgin algorithms for the field of sr_max
and rr_max of qp context
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch mainly implement rq inline data feature for hip08
RoCE in kernel mode.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds more detailed comments when we call the
memory barrier function, such as rmb, wmb and mb. Three
mb() callers are deleted since they are unnecessary.
Suggested-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Patches for 4.16 that are dependent on patches sent to 4.15-rc.
These are small clean ups for the vmw_pvrdma and i40iw drivers.
* 'from-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git:
RDMA/vmw_pvrdma: Remove usage of BIT() from UAPI header
RDMA/vmw_pvrdma: Use refcount_t instead of atomic_t
RDMA/vmw_pvrdma: Use more specific sizeof in kcalloc
RDMA/vmw_pvrdma: Clarify QP and CQ is_kernel logic
RDMA/vmw_pvrdma: Add UAR SRQ macros in ABI header file
i40iw: Change accelerated flag to bool
This patch adds eq support for hip08. The eq table can
be multi-hop addressed.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Reviewed-by: Lijun Ou <oulijun@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Considering the compatibility of supporting hip08's eq
process and possible changes of data structure, this patch
refactors the eq code structure of hip06.
We move all the eq process code for hip06 from hns_roce_eq.c
into hns_roce_hw_v1.c, and also for hns_roce_eq.h. With
these changes, it will be convenient to add the eq support
for later hardware version.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Reviewed-by: Lijun Ou <oulijun@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In general, dma_alloc_coherent() returns a CPU virtual address and
a DMA address, and we have no guarantee that the underlying memory
even has an associated struct page at all.
This patch gets rid of the page operation after dma_alloc_coherent,
and records the VA returned form dma_alloc_coherent in the struct
of hem in hns RoCE driver.
Fixes: 9a44353("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Xiping Zhang (Francis) <zhangxiping3@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In general dma_alloc_coherent() returns a CPU virtual address and
a DMA address, and we have no guarantee that the virtual address
is either in the linear map or vmalloc. It could be in some other special
place. We have no guarantee that the underlying memory even has
an associated struct page at all.
In current code, there are incorrect usage as below:
dma_alloc_coherent + virt_to_page + vmap. There will probably
introduce coherency problem. This patch fixes it to get rid of
virt_to_page and vmap calls at Leon's suggestion. The related
link: https://lkml.org/lkml/2017/11/7/34
Fixes: 9a44353("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Xiping Zhang (Francis) <zhangxiping3@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the smmu is enabled, the length of sg obtained from
__iommu_map_sg_attrs is not 4kB. When the IOVA is set with the sg
dma address, the IOVA will not be page continuous. so, the current
code has MTPT configuration error that probably cause dma operation
failure. In order to fix this issue, the IOVA should be calculated
based on the sg length.
Fixes: 3958cc5("RDMA/hns: Configure the MTPT in hip08")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Xiping Zhang (Francis) <zhangxiping3@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The cmd_sn field of CQ doorbell inits for 0. It should be
increment on each first db rung after a completion Event.
if the cmd_sn of notify doorbell Adjacent two times is the
same, the hardware will distinguish it for the same notify
request and update its type according to the priority level
of next event and solicited event.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
