Commit Graph

45773 Commits

Author SHA1 Message Date
John Stultz
72f3cd64dc device-tree: nexus7: Remove power gpio key entry and use pmic8xxx-pwrkey
Since the pmic8xxx-pwrkey driver is already supported in the
qcom-apq8064.dtsi, and the pmic8xxx-pwrkey supports logic to
configure proper device shutdown when ps_hold goes low, it is
better to use that driver then a generic gpio button.

Thus this patch remove the gpio power key entry here, so we
don't get double input events from having two drivers enabled.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andy Gross <agross@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:54 -05:00
Andy Gross
30f1e2dde6 arm: dts: qcom: Update smem state cells usage
This patch updates the qcom,state-cells to qcom,smem-state-cells to
match recent changes to the binding.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:54 -05:00
Andy Gross
d32bfe101f ARM: dts: qcom: msm8974-honami: Set DMA as remotely controlled
This patch adds the qcom,controlled-remotely property for the blsp2_bam
controller node.  This board requires this, otherwise the board fails to
boot due to access of protected registers during BAM initialization.

Fixes: 62bc817922 dts: msm8974: Add blsp2_bam dma node

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-06-27 17:36:53 -05:00
Parth Pancholi
93b8e6fda1 ARM: dts: sd_600eval: Fix eMMC lockup issue
This board locks up if we stress test the eMMC, as the regulator s4 is
unable to supply enough current for all the peripherials attached to it.
As this supply is wired up to most of the peripherials including DDR,
it resulted in such lockup.

This patch fixes this issue by setting s4 regulator correctly with
Auto power mode.

Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[Srinivas Kandagatla: rewrote the change log]
Tested-by: Girish Sharma <girish.sharma@einfochips.com>
Signed-off-by: Parth Pancholi <parth.pancholi@einfochips.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:53 -05:00
Srinivas Kandagatla
5f963e2951 ARM: dts: apq8064: rename db600c to SD_600eval
This board has been renamed recently and announced at
https://eragon.einfochips.com/products/sd-600eval.html

So rename this board files so that it reflects actual product in market.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:52 -05:00
Srinivas Kandagatla
c351c254ac ARM: dts: apq8064: move sdcc3 pinctrls out of baord file
This patch move sdcc3 pinctrl nodes out of board file, so that
other boards do not duplicate the same thing.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:51 -05:00
Srinivas Kandagatla
ccd140b574 ARM: dts: apq8064: move sdcc1 pinctrl nodes to soc file
This patch moves out the sdcc1 pinctrl nodes out of board files to soc file,
so that it will be duplicated in other board files.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:51 -05:00
Andy Gross
9e5d41d440 dts: qcom: apq8064: Add SCM firmware node
This patch adds the firmware node for the APQ8064

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-11 22:57:15 -05:00
Andy Gross
e0e7da5dfd dts: qcom: msm8974: Add SCM firmware node
This patch adds the Qualcomm SCM firmware node.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-11 22:57:14 -05:00
Andy Gross
2b9b54666c dts: qcom: apq8084: Add SCM firmware node
This patch adds the firmware node for the SCM

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-11 22:57:14 -05:00
Andy Gross
71c0ed7217 ARM: dts: qcom: pma8084: Add pwrkey entry
This patch adds the power key device tree node.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-06-11 22:57:14 -05:00
Andy Gross
a537b8d68e ARM: dts: qcom: Remove size elements from pmic reg
The #size-cells for the pmics are 0, but we specify a size in the
reg property so that MPP and GPIO modules can figure out how many
pins there are. Now that we've done that by counting irqs, we can
remove the size elements in the reg properties and be DT
compliant.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-06-11 22:57:14 -05:00
Stephen Boyd
5fda09b809 ARM: dts: qcom: Enable sdcard and emmc on apq8074 dragonboard
Enable the sdcard slot and wire up the regulators for the two
storage controllers found on the apq8074 dragonboard.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-11 22:57:14 -05:00
Stephen Boyd
d04dc9521c ARM: dts: qcom: Enable RPM regulators on apq8074 dragonboard
Add the appropriate min/max voltages for the regulators on the
apq8074 dragonboard so that they can be used by clients properly.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-11 22:57:14 -05:00
Andy Gross
938b4d4ea1 Revert "Revert "dts: msm8974: Add dma channels for blsp2_i2c1 node""
This adds back the dma channels for the i2c1 node.  This is safe now
that the qcom,controlled-remotely changes are in place and will be used
on the boards that require it.

This reverts commit 10c0f0e92f.
2016-06-10 23:50:43 -05:00
Andy Gross
d44cbb1e9c Revert "Revert "dts: msm8974: Add blsp2_bam dma node""
This puts back in place the blsp2_bam node.  This can be safely added
due to the addition of the special qcom,controlled-remotely flag that
will be used on specific boards that require it.

This reverts commit 338d518898.
2016-06-10 23:50:29 -05:00
Linus Torvalds
e28e909c36 - move kvm_stat tool from QEMU repo into tools/kvm/kvm_stat
(kvm_stat had nothing to do with QEMU in the first place -- the tool
    only interprets debugfs)
 - expose per-vm statistics in debugfs and support them in kvm_stat
   (KVM always collected per-vm statistics, but they were summarised into
    global statistics)
 
 x86:
  - fix dynamic APICv (VMX was improperly configured and a guest could
    access host's APIC MSRs, CVE-2016-4440)
  - minor fixes
 
 ARM changes from Christoffer Dall:
  "This set of changes include the new vgic, which is a reimplementation
   of our horribly broken legacy vgic implementation.  The two
   implementations will live side-by-side (with the new being the
   configured default) for one kernel release and then we'll remove the
   legacy one.
 
   Also fixes a non-critical issue with virtual abort injection to
   guests."
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJXRz0KAAoJEED/6hsPKofosiMIAIHmRI+9I6VMNmQe5vrZKz9/
 vt89QGxDJrFQwhEuZovenLEDaY6rMIJNguyvIbPhNuXNHIIPWbe6cO6OPwByqkdo
 WI/IIqcAJN/Bpwt4/Y2977A5RwDOwWLkaDs0LrZCEKPCgeh9GWQf+EfyxkDJClhG
 uIgbSAU+t+7b05K3c6NbiQT/qCzDTCdl6In6PI/DFSRRkXDaTcopjjp1PmMUSSsR
 AM8LGhEzMer+hGKOH7H5TIbN+HFzAPjBuDGcoZt0/w9IpmmS5OMd3ZrZ320cohz8
 zZQooRcFrT0ulAe+TilckmRMJdMZ69fyw3nzfqgAKEx+3PaqjKSY/tiEgqqDJHY=
 =EEBK
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull second batch of KVM updates from Radim Krčmář:
 "General:

   - move kvm_stat tool from QEMU repo into tools/kvm/kvm_stat (kvm_stat
     had nothing to do with QEMU in the first place -- the tool only
     interprets debugfs)

   - expose per-vm statistics in debugfs and support them in kvm_stat
     (KVM always collected per-vm statistics, but they were summarised
     into global statistics)

  x86:

   - fix dynamic APICv (VMX was improperly configured and a guest could
     access host's APIC MSRs, CVE-2016-4440)

   - minor fixes

  ARM changes from Christoffer Dall:

   - new vgic reimplementation of our horribly broken legacy vgic
     implementation.  The two implementations will live side-by-side
     (with the new being the configured default) for one kernel release
     and then we'll remove the legacy one.

   - fix for a non-critical issue with virtual abort injection to guests"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (70 commits)
  tools: kvm_stat: Add comments
  tools: kvm_stat: Introduce pid monitoring
  KVM: Create debugfs dir and stat files for each VM
  MAINTAINERS: Add kvm tools
  tools: kvm_stat: Powerpc related fixes
  tools: Add kvm_stat man page
  tools: Add kvm_stat vm monitor script
  kvm:vmx: more complete state update on APICv on/off
  KVM: SVM: Add more SVM_EXIT_REASONS
  KVM: Unify traced vector format
  svm: bitwise vs logical op typo
  KVM: arm/arm64: vgic-new: Synchronize changes to active state
  KVM: arm/arm64: vgic-new: enable build
  KVM: arm/arm64: vgic-new: implement mapped IRQ handling
  KVM: arm/arm64: vgic-new: Wire up irqfd injection
  KVM: arm/arm64: vgic-new: Add vgic_v2/v3_enable
  KVM: arm/arm64: vgic-new: vgic_init: implement map_resources
  KVM: arm/arm64: vgic-new: vgic_init: implement vgic_init
  KVM: arm/arm64: vgic-new: vgic_init: implement vgic_create
  KVM: arm/arm64: vgic-new: vgic_init: implement kvm_vgic_hyp_init
  ...
2016-05-27 13:41:54 -07:00
Linus Torvalds
5b26fc8824 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:

 - new option CONFIG_TRIM_UNUSED_KSYMS which does a two-pass build and
   unexports symbols which are not used in the current config [Nicolas
   Pitre]

 - several kbuild rule cleanups [Masahiro Yamada]

 - warning option adjustments for gcov etc [Arnd Bergmann]

 - a few more small fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (31 commits)
  kbuild: move -Wunused-const-variable to W=1 warning level
  kbuild: fix if_change and friends to consider argument order
  kbuild: fix adjust_autoksyms.sh for modules that need only one symbol
  kbuild: fix ksym_dep_filter when multiple EXPORT_SYMBOL() on the same line
  gcov: disable -Wmaybe-uninitialized warning
  gcov: disable tree-loop-im to reduce stack usage
  gcov: disable for COMPILE_TEST
  Kbuild: disable 'maybe-uninitialized' warning for CONFIG_PROFILE_ALL_BRANCHES
  Kbuild: change CC_OPTIMIZE_FOR_SIZE definition
  kbuild: forbid kernel directory to contain spaces and colons
  kbuild: adjust ksym_dep_filter for some cmd_* renames
  kbuild: Fix dependencies for final vmlinux link
  kbuild: better abstract vmlinux sequential prerequisites
  kbuild: fix call to adjust_autoksyms.sh when output directory specified
  kbuild: Get rid of KBUILD_STR
  kbuild: rename cmd_as_s_S to cmd_cpp_s_S
  kbuild: rename cmd_cc_i_c to cmd_cpp_i_c
  kbuild: drop redundant "PHONY += FORCE"
  kbuild: delete unnecessary "@:"
  kbuild: mark help target as PHONY
  ...
2016-05-26 22:01:22 -07:00
Linus Torvalds
bdc6b758e4 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "Mostly tooling and PMU driver fixes, but also a number of late updates
  such as the reworking of the call-chain size limiting logic to make
  call-graph recording more robust, plus tooling side changes for the
  new 'backwards ring-buffer' extension to the perf ring-buffer"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  perf record: Read from backward ring buffer
  perf record: Rename variable to make code clear
  perf record: Prevent reading invalid data in record__mmap_read
  perf evlist: Add API to pause/resume
  perf trace: Use the ptr->name beautifier as default for "filename" args
  perf trace: Use the fd->name beautifier as default for "fd" args
  perf report: Add srcline_from/to branch sort keys
  perf evsel: Record fd into perf_mmap
  perf evsel: Add overwrite attribute and check write_backward
  perf tools: Set buildid dir under symfs when --symfs is provided
  perf trace: Only auto set call-graph to "dwarf" when syscalls are being traced
  perf annotate: Sort list of recognised instructions
  perf annotate: Fix identification of ARM blt and bls instructions
  perf tools: Fix usage of max_stack sysctl
  perf callchain: Stop validating callchains by the max_stack sysctl
  perf trace: Fix exit_group() formatting
  perf top: Use machine->kptr_restrict_warned
  perf trace: Warn when trying to resolve kernel addresses with kptr_restrict=1
  perf machine: Do not bail out if not managing to read ref reloc symbol
  perf/x86/intel/p4: Trival indentation fix, remove space
  ...
2016-05-25 17:05:40 -07:00
Linus Torvalds
ecc5fbd5ef pwm: Changes for v4.7-rc1
This set of changes introduces an atomic API to the PWM subsystem. This
 is influenced by the DRM atomic API that was introduced a while back,
 though it is obviously a lot simpler. The fundamental idea remains the
 same, though: drivers provide a single callback to implement the atomic
 configuration of a PWM channel.
 
 As a side-effect the PWM subsystem gains the ability for initial state
 retrieval, so that the logical state mirrors that of the hardware. Many
 use-cases don't care about this, but for others it is essential.
 
 These new features require changes in all users, which these patches
 take care of. The core is transitioned to use the atomic callback if
 available and provides a fallback mechanism for other drivers.
 
 Changes to transition users and drivers to the atomic API are postponed
 to v4.8.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXRcVWAAoJEN0jrNd/PrOhO3EP/RDuuco1fROml1ElCjcnWWfv
 3dPyKEJhZktMmRNd/V0zMUJiOwr77wlbX4oQ5HajMHNYFQ65jfihbbylhSDepnxg
 mjKV/yo18rzYZt9fv8huwvlwMOlLrJ9wQn4Gkbr5tzke6nITp52DTNH5y/anPQIk
 B7neA1TerodAbE9FWjYuBZIltkmYZDqdm//RCHXVyYym8VuotE+jf+nrMXI78FoL
 lgG64z/2OaGI+NZJQcpWftuz9nnenpa3sSLrvpitWEb/dAsXroMW/f08uVuOW87v
 0xk7N7zmEkef7izVOWiPOK/MxIdc8hI4A5JftzMJ7nbgJvwG78dJiOxgFhrJYx0z
 7zrYfjvvzjW0dpjZUvO37T/V5Rfxrk9sM7qUHJmN0+1oEkkCo1/c75JWTU2AmT4l
 qkJdOGhgv7LumIiwbEyxc/5Jyh1akKOUX2svO0+0dptLRX2UpN3yeKIYinG1dAuT
 86+/uuM6CL5gc+jVZ3GLNWfzHUu2RFVX0r0pzywq53pK5gMEs5WyxoIb5mHb8liA
 sHsrZ3wbGGn95yZo8CwkzXIUsUH7qKYK+UVWA6OVBoTq4AOBZtII1AqvUttl25qL
 xuKpj70xaBhK7VGqzDYQ68lqBaRySh+yzL/QsmnPEyx59mW81ytMrsn1Kmnuae2l
 bzUsnWrpHc6530fRggTD
 =sxT9
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set of changes introduces an atomic API to the PWM subsystem.
  This is influenced by the DRM atomic API that was introduced a while
  back, though it is obviously a lot simpler.  The fundamental idea
  remains the same, though: drivers provide a single callback to
  implement the atomic configuration of a PWM channel.

  As a side-effect the PWM subsystem gains the ability for initial state
  retrieval, so that the logical state mirrors that of the hardware.
  Many use-cases don't care about this, but for others it is essential.

  These new features require changes in all users, which these patches
  take care of.  The core is transitioned to use the atomic callback if
  available and provides a fallback mechanism for other drivers.

  Changes to transition users and drivers to the atomic API are
  postponed to v4.8"

* tag 'pwm/for-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits)
  pwm: Add information about polarity, duty cycle and period to debugfs
  pwm: Switch to the atomic API
  pwm: Update documentation
  pwm: Add core infrastructure to allow atomic updates
  pwm: Add hardware readout infrastructure
  pwm: Move the enabled/disabled info into pwm_state
  pwm: Introduce the pwm_state concept
  pwm: Keep PWM state in sync with hardware state
  ARM: Explicitly apply PWM config extracted from pwm_args
  drm: i915: Explicitly apply PWM config extracted from pwm_args
  input: misc: pwm-beeper: Explicitly apply PWM config extracted from pwm_args
  input: misc: max8997: Explicitly apply PWM config extracted from pwm_args
  backlight: lm3630a: explicitly apply PWM config extracted from pwm_args
  backlight: lp855x: Explicitly apply PWM config extracted from pwm_args
  backlight: lp8788: Explicitly apply PWM config extracted from pwm_args
  backlight: pwm_bl: Use pwm_get_args() where appropriate
  fbdev: ssd1307fb: Use pwm_get_args() where appropriate
  regulator: pwm: Use pwm_get_args() where appropriate
  leds: pwm: Use pwm_get_args() where appropriate
  input: misc: max77693: Use pwm_get_args() where appropriate
  ...
2016-05-25 10:40:15 -07:00
Linus Torvalds
28165ec7a9 ARM: SoC fixes for 4.7
This is a first set of bug fixes on top of what was merged for 4.7.
 Two patches for lpc32xx address a harmless build warning that was
 just introduced, one patch for the mediatek soc driver fixes a warning
 for arm64, and the pxa changes are minor cleanups that should have
 been part of the original pull requests but that I forgot to apply
 to the cleanup-fixes branch earlier.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV0St6WCrR//JCVInAQLXtw//SAjPMT1Kcr1Bf9Bg6XcL4p3P2VUATKT/
 K/2T8/1eLtBz19yl1sBAfYwazmX7UEHmEy5IxAGb9oGo1rS6tel0r190MVqMThmp
 yQNE9WZhMmINdge9/CQefXy7VL0IfCwU/O/YWmFawMQWXAb9WiJ7tHLD2etyVSEC
 ktIwN/ZBEYsDmaYuclGeybv8tldSnnsgM1kb/9SWLFlrlSKT63tTcuJVzMy0uUhM
 zLuzIVc8ixzJ8+JMaz3TzPhl5g2JufDRnCGKUWXHfYr+pzxxZEA08LBMqnuM4Bue
 tKEwJxByIVDTE5XzDG1PkWcmGnbA6fFG0M3Em0KnAKo/9JhqbiN3bCce65lKdLKO
 voTuvxi84W9fQVjGR7F71HRQC6Xwpd+E9R8joJ/eIukMImlz9Rp8A2b0lsAn8R8d
 tuHIVgr1TzuYSj/8KQlylszz/i+/plIhHFrNo+ThUJ6lnm8UI9rZolsdWHZHr5FX
 ViIxy+GT0W/4IT3hm0+uXdDIxSNqSeqNo3n2bwQa0ZFYHidTxTJTC1Icy5YU+NDU
 Vq92IV/OMaqeqNT9WtPb1ibWxqXgSfvWJN1BPWtwIBwGMqfqgh1K2ofkJT/Qhx89
 h6Fx5+Vp8Isq9QZaC1zH3YHdO/v1a0qsYDNMujZK8RmA4GHAupOKIM2ddpbgVGVP
 Nd99yUiDGJM=
 =LCK3
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "This is a first set of bug fixes on top of what was merged for 4.7.

  Two patches for lpc32xx address a harmless build warning that was just
  introduced, one patch for the mediatek soc driver fixes a warning for
  arm64, and the pxa changes are minor cleanups that should have been
  part of the original pull requests but that I forgot to apply to the
  cleanup-fixes branch earlier"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: lpc32xx: fix NR_IRQS confict
  ARM: lpc32xx: remove legacy irq controller driver
  soc: mtk-pmic-wrap: avoid integer overflow warning
  ARM: pxa: Remove CLK_IS_ROOT
  ARM: pxa: activate pinctrl for device-tree machines
2016-05-24 15:50:58 -07:00
Linus Torvalds
08344f3b43 ARM: SoC: late DT updates for v4.7
This is a collection of a few late fixes and other misc. stuff that
 had dependencies on things being merged from other trees.
 
 The Renesas R-Car power domain handling, and the Nvidia Tegra USB
 support both hand notable changes that required changing the DT binding
 in a way that only provides compatibility with old DT blobs on new
 kernels but not vice versa. As a consequence, the DT changes
 are based on top of the driver changes and are now in this branch.
 
 For NXP i.MX and Samsung Exynos, the changes in here depend on
 other changes that got merged through the clk maintainer tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV0Sse2CrR//JCVInAQJoOg//VQwAUxayKGfYVzhJjhHdYbVA9kWYczHb
 wizFbF51XPylQzfGgHxEZJgdO3y2Ks54J7xaCK7oSUPEBT0rHsLQunHhq0aVQpew
 1c06vEysYMkRclG7C0zN7i4gwdig+L4r6kUguTvb+nyJS3RISg0LaSoANVU65dQ5
 +g4DLRrX1QlZPBXR8Fc/S1gTFXU+dO1S0oJFnK9ZZTgmsGg4GA0qC60hdsv+WeSv
 uzS4FJoxSy9MzoAFqmnWIa4jBV9I1Rg5vi7dfoBbTW1XOAMpq+GVLLU+Lvso0Jqw
 xWjBSmPl6l/cZ7BhpzWq8knKOsEezh5LLrVRXViVCGfTIFdlObxyHzeKcJp25V1p
 mL98MBXobn9Rly9hJxyzpeNWITZ6qJYR+IQy3Lsuk5KrdZG2f4uTErtoqmYRI3Pn
 vuXoi13NUeoCrHZJZ+fNUGwx5a5/hgUQXP5u+98uucQSqIVxe0cGnQVnFm84X81r
 Sj/dXxFlFBZfqfE8rf1cFd+YEbKtpF13vEURAQWrnEzBmJSTu7Cp8qdA5hX5CeK4
 DW9bsu5hkWwnzoC2Ox/ZQVms4aI3q8s2xuu28GEJJdCE2IUiSnag/5vhGBzd4dTm
 9R69RhE9y4EOhw+0z1O0LfoKoo6YyUQa+OUNVIwEfFjcCdZiMQIdZWi2PLv4jeAR
 jBBbpcWtHLo=
 =I0Be
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
 "This is a collection of a few late fixes and other misc stuff that had
  dependencies on things being merged from other trees.

  The Renesas R-Car power domain handling, and the Nvidia Tegra USB
  support both hand notable changes that required changing the DT
  binding in a way that only provides compatibility with old DT blobs on
  new kernels but not vice versa.  As a consequence, the DT changes are
  based on top of the driver changes and are now in this branch.

  For NXP i.MX and Samsung Exynos, the changes in here depend on other
  changes that got merged through the clk maintainer tree"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
  ARM: dts: exynos: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3
  ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos542x SoC
  ARM: dts: exynos: Add NoC Probe dt node for Exynos542x SoC
  ARM: dts: exynos: Add support of bus frequency for exynos4412-trats/odroidu3
  ARM: dts: exynos: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3
  ARM: dts: exynos: Add support of bus frequency using VDD_INT for exynos3250-rinato
  ARM: dts: exynos: Add exynos4412-ppmu-common dtsi to delete duplicate PPMU nodes
  ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4210
  ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos4x12
  ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4x12
  ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos3250
  ARM: dts: exynos: Add DMC bus frequency for exynos3250-rinato/monk
  ARM: dts: exynos: Add DMC bus node for Exynos3250
  ARM: tegra: Enable XUSB on Nyan
  ARM: tegra: Enable XUSB on Jetson TK1
  ARM: tegra: Enable XUSB on Venice2
  ARM: tegra: Add Tegra124 XUSB controller
  ARM: tegra: Move Tegra124 to the new XUSB pad controller binding
  ARM: dts: r8a7794: Use SYSC "always-on" PM Domain
  ARM: dts: r8a7793: Use SYSC "always-on" PM Domain
  ...
2016-05-24 15:46:06 -07:00
Arnd Bergmann
09564b7d84 ARM: lpc32xx: fix NR_IRQS confict
With the change to sparse IRQs, the lpc32xx platform gets a warning about
conflicting macros:

In file included from arch/arm/mach-lpc32xx/irq.c:31:0:
arch/arm/mach-lpc32xx/include/mach/irqs.h:115:0: warning: "NR_IRQS" redefined
 #define NR_IRQS    96
arch/arm/include/asm/irq.h:9:0: note: this is the location of the previous definition
 #define NR_IRQS NR_IRQS_LEGACY

One such instance was in the old irq driver that is now removed by
the previous patch, but any other file including mach/irqs.h still
has the issue. Since none of them use this constant, we can just
remove the old definition.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 8cb17b5ed0 ("irqchip: Add LPC32xx interrupt controller driver")
2016-05-24 19:32:46 +00:00
Vladimir Zapolskiy
342f3f9bf6 ARM: lpc32xx: remove legacy irq controller driver
New NXP LPC32xx irq chip driver is used instead of a legacy one.

[this also fixes a harmless build warning about the NR_IRQS redefinition]

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-05-24 19:32:45 +00:00
Linus Torvalds
8bc4d5f394 MTD updates for v4.7:
First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him.
 
 Generic:
 
  * Migrated NAND LED trigger to be a generic MTD trigger
 
 NAND:
 
  * Introduction of the "ECC algorithm" concept, to avoid overloading the ECC
    mode field too much more
  * Replaced the nand_ecclayout infrastructure with something a little more
    flexible (finally!) and future proof
  * Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of
    this into their own tree as well
  * Prepare the sunxi NAND driver to receive DMA support
  * Handle bitflips in erased pages on GPMI revisions that do not support
    this in hardware.
 
 SPI NOR:
 
  * Start using the spi_flash_read() API for SPI drivers that support it (i.e.,
    SPI drivers with special memory-mapped flash modes)
 
 And other small scattered improvments.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXQ9oUAAoJEFySrpd9RFgttf0P/3oIVCvLHSFIsi7XiUusWJWk
 Cb+xW3ujFd2kNUqAQGnyvPUGU1amgjAjy2kwMpvpOG07DVgSnxQVGaQLins8Zwpw
 auWxH8llISmC6UkNsS1jV0d7KzSMCT2Ne+BenRAn68kq3ovXPPB3B19B6dFj8ail
 s83ajoZhsn1+eyctiKtbhXgZWkJHlRmBeXPKAJcS0lBcSibR+6N+O//JEAMnyYvc
 7azuw0KMVwQNnNYFAfd9dilV5juZ9bZptTJYH7XuF+44FhxmSKvTX2a9gmp0C4Bm
 FszUiPrIWF+t98nSQxxSn/zPlyllFyoisa6F7eGnDHIz+bH0Emf2oVwsSG5ASl42
 XTml0kB0jCfuBfgAiyhYU2Uds7rSYs/ZcHr3iPgpUY3Sc3dgoArDdahMJXwqaoa8
 UdChu6A+rjhi9PqhzNNVTarbilp3pOVgKAUVEWTdpQ1wGU4c+9SNlTTwhPy4g7RB
 uKlqbMeiZ/5rPiihaMUNtzxMxSe9OGYW2HVNVExvmlF2Ca42M1xJJBMlAA6IIXyS
 35d3Y4F5zPP7U6GCVla06WHkL5ahXJWmI0Xhf+2jCnDMipeAl6eCEiAJY5EmvAnr
 FTpZ4qkspED69mO8oZW9ORje0n6PCm4XPOi4Vl8kci8tlBsEJMk9jaedWwGlZkRk
 I5leUP4NEougvuHce2Cn
 =J6KN
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "First cycle with Boris as NAND maintainer! Many (most) bullets stolen
  from him.

  Generic:
   - Migrated NAND LED trigger to be a generic MTD trigger

  NAND:
   - Introduction of the "ECC algorithm" concept, to avoid overloading
     the ECC mode field too much more
   - Replaced the nand_ecclayout infrastructure with something a little
     more flexible (finally!) and future proof
   - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some
     of this into their own tree as well
   - Prepare the sunxi NAND driver to receive DMA support
   - Handle bitflips in erased pages on GPMI revisions that do not
     support this in hardware.

  SPI NOR:
   - Start using the spi_flash_read() API for SPI drivers that support
     it (i.e., SPI drivers with special memory-mapped flash modes)

  And other small scattered improvments"

* tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits)
  mtd: spi-nor: support GigaDevice gd25lq64c
  mtd: nand_bch: fix spelling of "probably"
  mtd: brcmnand: respect ECC algorithm set by NAND subsystem
  gpmi-nand: Handle ECC Errors in erased pages
  Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value
  mtd: nand: add support for "nand-ecc-algo" DT property
  mtd: mtd: drop NAND_ECC_SOFT_BCH enum value
  mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping
  mtd: nand: read ECC algorithm from the new field
  mtd: nand: fsmc: validate ECC setup by checking algorithm directly
  mtd: nand: set ECC algorithm to Hamming on fallback
  staging: mt29f_spinand: set ECC algorithm explicitly
  CRIS v32: nand: set ECC algorithm explicitly
  mtd: nand: atmel: set ECC algorithm explicitly
  mtd: nand: davinci: set ECC algorithm explicitly
  mtd: nand: bf5xx: set ECC algorithm explicitly
  mtd: nand: omap2: Fix high memory dma prefetch transfer
  mtd: nand: omap2: Start dma request before enabling prefetch
  mtd: nandsim: add __init attribute
  mtd: nand: move of_get_nand_xxx() helpers into nand_base.c
  ...
2016-05-24 11:00:20 -07:00
Paolo Bonzini
44bcc92238 KVM/ARM Changes for v4.7 take 2
"The GIC is dead; Long live the GIC"
 
 This set of changes include the new vgic, which is a reimplementation of
 our horribly broken legacy vgic implementation.  The two implementations
 will live side-by-side (with the new being the configured default) for
 one kernel release and then we'll remove it.
 
 Also fixes a non-critical issue with virtual abort injection to guests.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXRA7PAAoJEEtpOizt6ddy9a0H+wQ5LTC4rrgcWOsLjfa7res7
 SqB3HEqrzmN3zMbv4dgYeMSBDqr6F3b1+8DJ6n1WkG7afXOKrpMWsl9SXgwmRc1q
 8H54DYLcu/CDakzi/FKTeZEIp/u+tpMC7xQLFk8PFx/NUPfspPt1NU6Qi0fumZj6
 5AbXwC6FKojplgO6wxV7oHRRiEnfrN5F+1whD3QlaDmI+rlNUSYNp2Ljhp8k9m9E
 NSeGzZgeMdHOeZpv60uhjotuxegG1zmHeHI59ltNytdfjuFL3LvNm18yG8u1yjKm
 9ZDjIu1m7dfuPw39DYC99cxP6tvEh03/N2zw86ZFgj7QfdW756WrV+UkSFfeIKE=
 =xy+z
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-4-7-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next

KVM/ARM Changes for v4.7 take 2

"The GIC is dead; Long live the GIC"

This set of changes include the new vgic, which is a reimplementation of
our horribly broken legacy vgic implementation.  The two implementations
will live side-by-side (with the new being the configured default) for
one kernel release and then we'll remove it.

Also fixes a non-critical issue with virtual abort injection to guests.
2016-05-24 12:10:51 +02:00
Linus Torvalds
84787c572d Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton:

 - Oleg's "wait/ptrace: assume __WALL if the child is traced".  It's a
   kernel-based workaround for existing userspace issues.

 - A few hotfixes

 - befs cleanups

 - nilfs2 updates

 - sys_wait() changes

 - kexec updates

 - kdump

 - scripts/gdb updates

 - the last of the MM queue

 - a few other misc things

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (84 commits)
  kgdb: depends on VT
  drm/amdgpu: make amdgpu_mn_get wait for mmap_sem killable
  drm/radeon: make radeon_mn_get wait for mmap_sem killable
  drm/i915: make i915_gem_mmap_ioctl wait for mmap_sem killable
  uprobes: wait for mmap_sem for write killable
  prctl: make PR_SET_THP_DISABLE wait for mmap_sem killable
  exec: make exec path waiting for mmap_sem killable
  aio: make aio_setup_ring killable
  coredump: make coredump_wait wait for mmap_sem for write killable
  vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
  ipc, shm: make shmem attach/detach wait for mmap_sem killable
  mm, fork: make dup_mmap wait for mmap_sem for write killable
  mm, proc: make clear_refs killable
  mm: make vm_brk killable
  mm, elf: handle vm_brk error
  mm, aout: handle vm_brk failures
  mm: make vm_munmap killable
  mm: make vm_mmap killable
  mm: make mmap_sem for write waits killable for mm syscalls
  MAINTAINERS: add co-maintainer for scripts/gdb
  ...
2016-05-23 19:42:28 -07:00
Michal Hocko
6904817607 vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
most architectures are relying on mmap_sem for write in their
arch_setup_additional_pages.  If the waiting task gets killed by the oom
killer it would block oom_reaper from asynchronous address space reclaim
and reduce the chances of timely OOM resolving.  Wait for the lock in
the killable mode and return with EINTR if the task got killed while
waiting.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>	[x86 vdso]
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Konstantin Khlebnikov
7efb2a7b85 arch/defconfig: remove CONFIG_RESOURCE_COUNTERS
This option was replaced by PAGE_COUNTER which is selected by MEMCG.

Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Linus Torvalds
1d6da87a32 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "Here's the main drm pull request for 4.7, it's been a busy one, and
  I've been a bit more distracted in real life this merge window.  Lots
  more ARM drivers, not sure if it'll ever end.  I think I've at least
  one more coming the next merge window.

  But changes are all over the place, support for AMD Polaris GPUs is in
  here, some missing GM108 support for nouveau (found in some Lenovos),
  a bunch of MST and skylake fixes.

  I've also noticed a few fixes from Arnd in my inbox, that I'll try and
  get in asap, but I didn't think they should hold this up.

  New drivers:
   - Hisilicon kirin display driver
   - Mediatek MT8173 display driver
   - ARC PGU - bitstreamer on Synopsys ARC SDP boards
   - Allwinner A13 initial RGB output driver
   - Analogix driver for DisplayPort IP found in exynos and rockchip

  DRM Core:
   - UAPI headers fixes and C++ safety
   - DRM connector reference counting
   - DisplayID mode parsing for Dell 5K monitors
   - Removal of struct_mutex from drivers
   - Connector registration cleanups
   - MST robustness fixes
   - MAINTAINERS updates
   - Lockless GEM object freeing
   - Generic fbdev deferred IO support

  panel:
   - Support for a bunch of new panels

  i915:
   - VBT refactoring
   - PLL computation cleanups
   - DSI support for BXT
   - Color manager support
   - More atomic patches
   - GEM improvements
   - GuC fw loading fixes
   - DP detection fixes
   - SKL GPU hang fixes
   - Lots of BXT fixes

  radeon/amdgpu:
   - Initial Polaris support
   - GPUVM/Scheduler/Clock/Power improvements
   - ASYNC pageflip support
   - New mesa feature support

  nouveau:
   - GM108 support
   - Power sensor support improvements
   - GR init + ucode fixes.
   - Use GPU provided topology information

  vmwgfx:
   - Add host messaging support

  gma500:
   - Some cleanups and fixes

  atmel:
   - Bridge support
   - Async atomic commit support

  fsl-dcu:
   - Timing controller for LCD support
   - Pixel clock polarity support

  rcar-du:
   - Misc fixes

  exynos:
   - Pipeline clock support
   - Exynoss4533 SoC support
   - HW trigger mode support
   - export HDMI_PHY clock
   - DECON5433 fixes
   - Use generic prime functions
   - use DMA mapping APIs

  rockchip:
   - Lots of little fixes

  vc4:
   - Render node support
   - Gamma ramp support
   - DPI output support

  msm:
   - Mostly cleanups and fixes
   - Conversion to generic struct fence

  etnaviv:
   - Fix for prime buffer handling
   - Allow hangcheck to be coalesced with other wakeups

  tegra:
   - Gamme table size fix"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1050 commits)
  drm/edid: add displayid detailed 1 timings to the modelist. (v1.1)
  drm/edid: move displayid validation to it's own function.
  drm/displayid: Iterate over all DisplayID blocks
  drm/edid: move displayid tiled block parsing into separate function.
  drm: Nuke ->vblank_disable_allowed
  drm/vmwgfx: Report vmwgfx version to vmware.log
  drm/vmwgfx: Add VMWare host messaging capability
  drm/vmwgfx: Kill some lockdep warnings
  drm/nouveau/gr/gf100-: fix race condition in fecs/gpccs ucode
  drm/nouveau/core: recognise GM108 chipsets
  drm/nouveau/gr/gm107-: fix touching non-existent ppcs in attrib cb setup
  drm/nouveau/gr/gk104-: share implementation of ppc exception init
  drm/nouveau/gr/gk104-: move rop_active_fbps init to nonctx
  drm/nouveau/bios/pll: check BIT table version before trying to parse it
  drm/nouveau/bios/pll: prevent oops when limits table can't be parsed
  drm/nouveau/volt/gk104: round up in gk104_volt_set
  drm/nouveau/fb/gm200: setup mmu debug buffer registers at init()
  drm/nouveau/fb/gk20a,gm20b: setup mmu debug buffer registers at init()
  drm/nouveau/fb/gf100-: allocate mmu debug buffers
  drm/nouveau/fb: allow chipset-specific actions for oneinit()
  ...
2016-05-23 11:48:48 -07:00
Zhaoxiu Zeng
fff7fb0b2d lib/GCD.c: use binary GCD algorithm instead of Euclidean
The binary GCD algorithm is based on the following facts:
	1. If a and b are all evens, then gcd(a,b) = 2 * gcd(a/2, b/2)
	2. If a is even and b is odd, then gcd(a,b) = gcd(a/2, b)
	3. If a and b are all odds, then gcd(a,b) = gcd((a-b)/2, b) = gcd((a+b)/2, b)

Even on x86 machines with reasonable division hardware, the binary
algorithm runs about 25% faster (80% the execution time) than the
division-based Euclidian algorithm.

On platforms like Alpha and ARMv6 where division is a function call to
emulation code, it's even more significant.

There are two variants of the code here, depending on whether a fast
__ffs (find least significant set bit) instruction is available.  This
allows the unpredictable branches in the bit-at-a-time shifting loop to
be eliminated.

If fast __ffs is not available, the "even/odd" GCD variant is used.

I use the following code to benchmark:

	#include <stdio.h>
	#include <stdlib.h>
	#include <stdint.h>
	#include <string.h>
	#include <time.h>
	#include <unistd.h>

	#define swap(a, b) \
		do { \
			a ^= b; \
			b ^= a; \
			a ^= b; \
		} while (0)

	unsigned long gcd0(unsigned long a, unsigned long b)
	{
		unsigned long r;

		if (a < b) {
			swap(a, b);
		}

		if (b == 0)
			return a;

		while ((r = a % b) != 0) {
			a = b;
			b = r;
		}

		return b;
	}

	unsigned long gcd1(unsigned long a, unsigned long b)
	{
		unsigned long r = a | b;

		if (!a || !b)
			return r;

		b >>= __builtin_ctzl(b);

		for (;;) {
			a >>= __builtin_ctzl(a);
			if (a == b)
				return a << __builtin_ctzl(r);

			if (a < b)
				swap(a, b);
			a -= b;
		}
	}

	unsigned long gcd2(unsigned long a, unsigned long b)
	{
		unsigned long r = a | b;

		if (!a || !b)
			return r;

		r &= -r;

		while (!(b & r))
			b >>= 1;

		for (;;) {
			while (!(a & r))
				a >>= 1;
			if (a == b)
				return a;

			if (a < b)
				swap(a, b);
			a -= b;
			a >>= 1;
			if (a & r)
				a += b;
			a >>= 1;
		}
	}

	unsigned long gcd3(unsigned long a, unsigned long b)
	{
		unsigned long r = a | b;

		if (!a || !b)
			return r;

		b >>= __builtin_ctzl(b);
		if (b == 1)
			return r & -r;

		for (;;) {
			a >>= __builtin_ctzl(a);
			if (a == 1)
				return r & -r;
			if (a == b)
				return a << __builtin_ctzl(r);

			if (a < b)
				swap(a, b);
			a -= b;
		}
	}

	unsigned long gcd4(unsigned long a, unsigned long b)
	{
		unsigned long r = a | b;

		if (!a || !b)
			return r;

		r &= -r;

		while (!(b & r))
			b >>= 1;
		if (b == r)
			return r;

		for (;;) {
			while (!(a & r))
				a >>= 1;
			if (a == r)
				return r;
			if (a == b)
				return a;

			if (a < b)
				swap(a, b);
			a -= b;
			a >>= 1;
			if (a & r)
				a += b;
			a >>= 1;
		}
	}

	static unsigned long (*gcd_func[])(unsigned long a, unsigned long b) = {
		gcd0, gcd1, gcd2, gcd3, gcd4,
	};

	#define TEST_ENTRIES (sizeof(gcd_func) / sizeof(gcd_func[0]))

	#if defined(__x86_64__)

	#define rdtscll(val) do { \
		unsigned long __a,__d; \
		__asm__ __volatile__("rdtsc" : "=a" (__a), "=d" (__d)); \
		(val) = ((unsigned long long)__a) | (((unsigned long long)__d)<<32); \
	} while(0)

	static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long),
								unsigned long a, unsigned long b, unsigned long *res)
	{
		unsigned long long start, end;
		unsigned long long ret;
		unsigned long gcd_res;

		rdtscll(start);
		gcd_res = gcd(a, b);
		rdtscll(end);

		if (end >= start)
			ret = end - start;
		else
			ret = ~0ULL - start + 1 + end;

		*res = gcd_res;
		return ret;
	}

	#else

	static inline struct timespec read_time(void)
	{
		struct timespec time;
		clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time);
		return time;
	}

	static inline unsigned long long diff_time(struct timespec start, struct timespec end)
	{
		struct timespec temp;

		if ((end.tv_nsec - start.tv_nsec) < 0) {
			temp.tv_sec = end.tv_sec - start.tv_sec - 1;
			temp.tv_nsec = 1000000000ULL + end.tv_nsec - start.tv_nsec;
		} else {
			temp.tv_sec = end.tv_sec - start.tv_sec;
			temp.tv_nsec = end.tv_nsec - start.tv_nsec;
		}

		return temp.tv_sec * 1000000000ULL + temp.tv_nsec;
	}

	static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long),
								unsigned long a, unsigned long b, unsigned long *res)
	{
		struct timespec start, end;
		unsigned long gcd_res;

		start = read_time();
		gcd_res = gcd(a, b);
		end = read_time();

		*res = gcd_res;
		return diff_time(start, end);
	}

	#endif

	static inline unsigned long get_rand()
	{
		if (sizeof(long) == 8)
			return (unsigned long)rand() << 32 | rand();
		else
			return rand();
	}

	int main(int argc, char **argv)
	{
		unsigned int seed = time(0);
		int loops = 100;
		int repeats = 1000;
		unsigned long (*res)[TEST_ENTRIES];
		unsigned long long elapsed[TEST_ENTRIES];
		int i, j, k;

		for (;;) {
			int opt = getopt(argc, argv, "n:r:s:");
			/* End condition always first */
			if (opt == -1)
				break;

			switch (opt) {
			case 'n':
				loops = atoi(optarg);
				break;
			case 'r':
				repeats = atoi(optarg);
				break;
			case 's':
				seed = strtoul(optarg, NULL, 10);
				break;
			default:
				/* You won't actually get here. */
				break;
			}
		}

		res = malloc(sizeof(unsigned long) * TEST_ENTRIES * loops);
		memset(elapsed, 0, sizeof(elapsed));

		srand(seed);
		for (j = 0; j < loops; j++) {
			unsigned long a = get_rand();
			/* Do we have args? */
			unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand();
			unsigned long long min_elapsed[TEST_ENTRIES];
			for (k = 0; k < repeats; k++) {
				for (i = 0; i < TEST_ENTRIES; i++) {
					unsigned long long tmp = benchmark_gcd_func(gcd_func[i], a, b, &res[j][i]);
					if (k == 0 || min_elapsed[i] > tmp)
						min_elapsed[i] = tmp;
				}
			}
			for (i = 0; i < TEST_ENTRIES; i++)
				elapsed[i] += min_elapsed[i];
		}

		for (i = 0; i < TEST_ENTRIES; i++)
			printf("gcd%d: elapsed %llu\n", i, elapsed[i]);

		k = 0;
		srand(seed);
		for (j = 0; j < loops; j++) {
			unsigned long a = get_rand();
			unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand();
			for (i = 1; i < TEST_ENTRIES; i++) {
				if (res[j][i] != res[j][0])
					break;
			}
			if (i < TEST_ENTRIES) {
				if (k == 0) {
					k = 1;
					fprintf(stderr, "Error:\n");
				}
				fprintf(stderr, "gcd(%lu, %lu): ", a, b);
				for (i = 0; i < TEST_ENTRIES; i++)
					fprintf(stderr, "%ld%s", res[j][i], i < TEST_ENTRIES - 1 ? ", " : "\n");
			}
		}

		if (k == 0)
			fprintf(stderr, "PASS\n");

		free(res);

		return 0;
	}

Compiled with "-O2", on "VirtualBox 4.4.0-22-generic #38-Ubuntu x86_64" got:

  zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10
  gcd0: elapsed 10174
  gcd1: elapsed 2120
  gcd2: elapsed 2902
  gcd3: elapsed 2039
  gcd4: elapsed 2812
  PASS
  zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10
  gcd0: elapsed 9309
  gcd1: elapsed 2280
  gcd2: elapsed 2822
  gcd3: elapsed 2217
  gcd4: elapsed 2710
  PASS
  zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10
  gcd0: elapsed 9589
  gcd1: elapsed 2098
  gcd2: elapsed 2815
  gcd3: elapsed 2030
  gcd4: elapsed 2718
  PASS
  zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10
  gcd0: elapsed 9914
  gcd1: elapsed 2309
  gcd2: elapsed 2779
  gcd3: elapsed 2228
  gcd4: elapsed 2709
  PASS

[akpm@linux-foundation.org: avoid #defining a CONFIG_ variable]
Signed-off-by: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com>
Signed-off-by: George Spelvin <linux@horizon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:58:30 -07:00
Petr Mladek
42a0bb3f71 printk/nmi: generic solution for safe printk in NMI
printk() takes some locks and could not be used a safe way in NMI
context.

The chance of a deadlock is real especially when printing stacks from
all CPUs.  This particular problem has been addressed on x86 by the
commit a9edc88093 ("x86/nmi: Perform a safe NMI stack trace on all
CPUs").

The patchset brings two big advantages.  First, it makes the NMI
backtraces safe on all architectures for free.  Second, it makes all NMI
messages almost safe on all architectures (the temporary buffer is
limited.  We still should keep the number of messages in NMI context at
minimum).

Note that there already are several messages printed in NMI context:
WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE
handlers.  These are not easy to avoid.

This patch reuses most of the code and makes it generic.  It is useful
for all messages and architectures that support NMI.

The alternative printk_func is set when entering and is reseted when
leaving NMI context.  It queues IRQ work to copy the messages into the
main ring buffer in a safe context.

__printk_nmi_flush() copies all available messages and reset the buffer.
Then we could use a simple cmpxchg operations to get synchronized with
writers.  There is also used a spinlock to get synchronized with other
flushers.

We do not longer use seq_buf because it depends on external lock.  It
would be hard to make all supported operations safe for a lockless use.
It would be confusing and error prone to make only some operations safe.

The code is put into separate printk/nmi.c as suggested by Steven
Rostedt.  It needs a per-CPU buffer and is compiled only on
architectures that call nmi_enter().  This is achieved by the new
HAVE_NMI Kconfig flag.

The are MN10300 and Xtensa architectures.  We need to clean up NMI
handling there first.  Let's do it separately.

The patch is heavily based on the draft from Peter Zijlstra, see

  https://lkml.org/lkml/2015/6/10/327

[arnd@arndb.de: printk-nmi: use %zu format string for size_t]
[akpm@linux-foundation.org: min_t->min - all types are size_t here]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>	[arm part]
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:58:30 -07:00
Jiri Slaby
e64646946e exit_thread: accept a task parameter to be exited
We need to call exit_thread from copy_process in a fail path.  So make it
accept task_struct as a parameter.

[v2]
* s390: exit_thread_runtime_instr doesn't make sense to be called for
  non-current tasks.
* arm: fix the comment in vfp_thread_copy
* change 'me' to 'tsk' for task_struct
* now we can change only archs that actually have exit_thread

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:58:30 -07:00
Jiri Slaby
5f56a5dfdb exit_thread: remove empty bodies
Define HAVE_EXIT_THREAD for archs which want to do something in
exit_thread. For others, let's define exit_thread as an empty inline.

This is a cleanup before we change the prototype of exit_thread to
accept a task parameter.

[akpm@linux-foundation.org: fix mips]
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:58:30 -07:00
Arnd Bergmann
4c1d76a1e1 This is the pxa changes for v4.7 cycle.
This is a minor cycle with :
  - cleanup fix from Stephen on clocks (CLK_ROOT deprecated)
  - pin control activation for device-tree platforms
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXJG+0AAoJEAP2et0duMsSZXAQAKlNDWaYPrrqqq0wkk1FeSi6
 vqyCL3Guc9ITSAXAPGqpF2X5zSWHRHlNgRo3f22tJScNbtsQ3iH3D8LADVUD6Cnh
 yWsliJ+2WtSK6oaL6AFw4kBoudFqrY17755GYCXBiZd6EWdeI46EAsR69abgTeXB
 K6n7ApThWkB2KQxUjL38DEIHDVmBJ1YkprgOBV+PMWYjXZ7+BJR5wx0Pg8Efs78C
 g+ObVggdwqCZmPFXC7YHIyYtHV95f1Cb1VDyJ8faqjw55v3i2iJNHQ54NtpEKL/G
 PmKi0KO+x8cXxPF6i+4yZCpYGcDccI4AiAjuJIB/E9XYAZD6EJnVx91DXYMki2op
 zSx8DY8a1C7Xh8aidspZ7uuRaGjomSJF8BLxofUUND2pdnX3pvQmWKRSIGqjDJLa
 Yl++2fEp/XU2IOgAKxLHZzJ/qDERJn99hmJMAQEdEtOMricBZt3XYyx7U7WMR2TK
 vWsLS72TYbxZryF+TfwV+UwVf2IKJDJfu3B8SV6My2MiPvNQPPQxoqhxZ+Xj4jna
 +WX16Dotl6Bnm6ufPE6O/ZIEe9ROmFY03asiLDfYrGgxgjw97kvpLIj7XMEKQvVP
 y1rA/qvCxcciECMGUCnBv62Tl+yv7f8h6D9hOV5gfdQFll/npx5C5FQC8REIVCOV
 K3aBzOtG+57C10xGP+wl
 =C0/K
 -----END PGP SIGNATURE-----

Merge tag 'pxa-for-4.7' of https://github.com/rjarzmik/linux into fixes

Merge "pxa changes for v4.7 cycle" from Robert Jarzmik:

This is a minor cycle with :
 - cleanup fix from Stephen on clocks (CLK_ROOT deprecated)
 - pin control activation for device-tree platforms

* tag 'pxa-for-4.7' of https://github.com/rjarzmik/linux:
  ARM: pxa: Remove CLK_IS_ROOT
  ARM: pxa: activate pinctrl for device-tree machines

These should have been part of the original pull request but got
accidentally dropped. Both changes in this branch can be considered
bugfixes, so I'm putting them in the fixes branch now.
2016-05-20 20:22:44 +02:00
Linus Torvalds
a1c28b75a9 Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
 "Changes included in this pull request:

   - revert pxa2xx-flash back to using ioremap_cached() and switch
     memremap() to use arch_memremap_wb()

   - remove pci=firmware command line argument handling

   - remove unnecessary arm_dma_set_mask() implementation, the generic
     implementation will do for ARM

   - removal of the ARM kallsyms "hack" to work around mode switching
     veneers and vectors located below PAGE_OFFSET

   - tidy up build system output a little

   - add L2 cache power management DT bindings

   - remove duplicated local_irq_disable() in reboot paths

   - handle AMBA primecell devices better at registration time with PM
     domains (needed for Samsung SoCs)

   - ARM specific preparation to support Keystone II kexec"

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8567/1: cache-uniphier: activate ways for secondary CPUs
  ARM: 8570/2: Documentation: devicetree: Add PL310 PM bindings
  ARM: 8569/1: pl2x0: Add OF control of cache power management
  ARM: 8568/1: reboot: remove duplicated local_irq_disable()
  ARM: 8566/1: drivers: amba: properly handle devices with power domains
  ARM: provide arm_has_idmap_alias() helper
  ARM: kexec: remove 512MB restriction on kexec crashdump
  ARM: provide improved virt_to_idmap() functionality
  ARM: kexec: fix crashkernel= handling
  ARM: 8557/1: specify install, zinstall, and uinstall as PHONY targets
  ARM: 8562/1: suppress "include/generated/mach-types.h is up to date."
  ARM: 8553/1: kallsyms: remove --page-offset command line option
  ARM: 8552/1: kallsyms: remove special lower address limit for CONFIG_ARM
  ARM: 8555/1: kallsyms: ignore ARM mode switching veneers
  ARM: 8548/1: dma-mapping: remove arm_dma_set_mask()
  ARM: 8554/1: kernel: pci: remove pci=firmware command line parameter handling
  ARM: memremap: implement arch_memremap_wb()
  memremap: add arch specific hook for MEMREMAP_WB mappings
  mtd: pxa2xx-flash: switch back from memremap to ioremap_cached
  ARM: reintroduce ioremap_cached() for creating cached I/O mappings
2016-05-20 10:01:38 -07:00
Christoffer Dall
35a2d58588 KVM: arm/arm64: vgic-new: Synchronize changes to active state
When modifying the active state of an interrupt via the MMIO interface,
we should ensure that the write has the intended effect.

If a guest sets an interrupt to active, but that interrupt is already
flushed into a list register on a running VCPU, then that VCPU will
write the active state back into the struct vgic_irq upon returning from
the guest and syncing its state.  This is a non-benign race, because the
guest can observe that an interrupt is not active, and it can have a
reasonable expectations that other VCPUs will not ack any IRQs, and then
set the state to active, and expect it to stay that way.  Currently we
are not honoring this case.

Thefore, change both the SACTIVE and CACTIVE mmio handlers to stop the
world, change the irq state, potentially queue the irq if we're setting
it to active, and then continue.

We take this chance to slightly optimize these functions by not stopping
the world when touching private interrupts where there is inherently no
possible race.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20 16:26:38 +02:00
Andre Przywara
efffe55af5 KVM: arm/arm64: vgic-new: enable build
Now that the new VGIC implementation has reached feature parity with
the old one, add the new files to the build system and add a Kconfig
option to switch between the two versions.
We set the default to the new version to get maximum test coverage,
in case people experience problems they can switch back to the old
behaviour if needed.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20 15:40:09 +02:00
Christoffer Dall
b13216cf60 KVM: arm/arm64: Provide functionality to pause and resume a guest
For some rare corner cases in our VGIC emulation later we have to stop
the guest to make sure the VGIC state is consistent.
Provide the necessary framework to pause and resume a guest.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2016-05-20 15:39:43 +02:00
Christoffer Dall
d5a5a0eff3 KVM: arm/arm64: Export mmio_read/write_bus
Rename mmio_{read,write}_bus to kvm_mmio_{read,write}_bus and export
them out of mmio.c.
This will be needed later for the new VGIC implementation.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2016-05-20 15:39:42 +02:00
Christoffer Dall
83091db981 KVM: arm/arm64: Fix MMIO emulation data handling
When the kernel was handling a guest MMIO read access internally, we
need to copy the emulation result into the run->mmio structure in order
for the kvm_handle_mmio_return() function to pick it up and inject the
	result back into the guest.

Currently the only user of kvm_io_bus for ARM is the VGIC, which did
this copying itself, so this was not causing issues so far.

But with the upcoming new vgic implementation we need this done
properly.

Update the kvm_handle_mmio_return description and cleanup the code to
only perform a single copying when needed.

Code and commit message inspired by Andre Przywara.

Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2016-05-20 15:39:42 +02:00
Christoffer Dall
41a54482c0 KVM: arm/arm64: Move timer IRQ map to latest possible time
We are about to modify the VGIC to allocate all data structures
dynamically and store mapped IRQ information on a per-IRQ struct, which
is indeed allocated dynamically at init time.

Therefore, we cannot record the mapped IRQ info from the timer at timer
reset time like it's done now, because VCPU reset happens before timer
init.

A possible later time to do this is on the first run of a per VCPU, it
just requires us to move the enable state to be a per-VCPU state and do
the lookup of the physical IRQ number when we are about to run the VCPU.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2016-05-20 15:39:41 +02:00
Ingo Molnar
21f77d231f perf/core improvements and fixes:
User visible:
 
 - Honour the kernel.perf_event_max_stack knob more precisely by not counting
   PERF_CONTEXT_{KERNEL,USER} when deciding when to stop adding entries to
   the perf_sample->ip_callchain[] array (Arnaldo Carvalho de Melo)
 
 - Fix identation of 'stalled-backend-cycles' in 'perf stat' (Namhyung Kim)
 
 - Update runtime using 'cpu-clock' event in 'perf stat' (Namhyung Kim)
 
 - Use 'cpu-clock' for cpu targets in 'perf stat' (Namhyung Kim)
 
 - Avoid fractional digits for integer scales in 'perf stat' (Andi Kleen)
 
 - Store vdso buildid unconditionally, as it appears in callchains and
   we're not checking those when creating the build-id table, so we
   end up not being able to resolve VDSO symbols when doing analysis
   on a different machine than the one where recording was done, possibly
   of a different arch even (arm -> x86_64) (He Kuang)
 
 Infrastructure:
 
 - Generalize max_stack sysctl handler, will be used for configuring
   multiple kernel knobs related to callchains (Arnaldo Carvalho de Melo)
 
 Cleanups:
 
 - Introduce DSO__NAME_KALLSYMS and DSO__NAME_KCORE, to stop using
   open coded strings (Masami Hiramatsu)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXOn7eAAoJENZQFvNTUqpAsOAP/3f/XJekPQAnMcKRBp2noCuj
 nRu1kBltVJyP8iOU5PKSJwel4F9ykNNMl+/rzzxHDo13IM8uc+HnZOJZ6e9mJIJ1
 xqjdqM4EDlYYoFApJzCjTK6CMlevCazosdQT1bbmMDYVPc2uQR/GnutFrzqf/Plg
 hEougIGtfrdy85g95CRdxpy2yMwDK4EwsiDRm9ib1hnuamQZl97buWemBVqSJmLY
 p82E2aMU5Fv5+B8AO4I7V88ZmgpmryjxpM+LjffgNUDSKsSHrlG4NiQ3znV1bgst
 Rc++w78+qxoIozOu6/IX8eSI2L/1eyM/yQ6Qre0KuvYXCl+NopTAYSSJlaA4tyHF
 c55z7HucuyATN3PrFRHlbWUT/RMIVC0j0lnZOc7SJLl90hJQ+nv0iZcbYwMbeHu1
 3LGlcd9jDwQYiClbaT9ATxZJ8B9An0/k/HJdatbAHN0wRomP2Ozz/qD2nmEbUwpV
 sCyLOo/LJkvVkuUjSg6ZiOArNIk4iTSPSAUV+SAL6YOEOZMAX5ISUJQ174+zFC9a
 gqtVsCXvwLIsndXb8ys1r9/fit/MUci0OzKX3SG1K765+E4Bk23KcAgMNbM/a7lp
 ZmHDXMC+yBYcnYNnaxkp7c55CWUlKGOeR4e+KmB99KoeIleYgPhD2UM5beo61TmN
 yUEPtiiFiZmTRkiAu83R
 =7OdF
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-20160516' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

- Honour the kernel.perf_event_max_stack knob more precisely by not counting
  PERF_CONTEXT_{KERNEL,USER} when deciding when to stop adding entries to
  the perf_sample->ip_callchain[] array (Arnaldo Carvalho de Melo)

- Fix identation of 'stalled-backend-cycles' in 'perf stat' (Namhyung Kim)

- Update runtime using 'cpu-clock' event in 'perf stat' (Namhyung Kim)

- Use 'cpu-clock' for cpu targets in 'perf stat' (Namhyung Kim)

- Avoid fractional digits for integer scales in 'perf stat' (Andi Kleen)

- Store vdso buildid unconditionally, as it appears in callchains and
  we're not checking those when creating the build-id table, so we
  end up not being able to resolve VDSO symbols when doing analysis
  on a different machine than the one where recording was done, possibly
  of a different arch even (arm -> x86_64) (He Kuang)

Infrastructure changes:

- Generalize max_stack sysctl handler, will be used for configuring
  multiple kernel knobs related to callchains (Arnaldo Carvalho de Melo)

Cleanups:

- Introduce DSO__NAME_KALLSYMS and DSO__NAME_KCORE, to stop using
  open coded strings (Masami Hiramatsu)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-20 08:20:14 +02:00
Linus Torvalds
a05a70db34 Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:

 - fsnotify fix

 - poll() timeout fix

 - a few scripts/ tweaks

 - debugobjects updates

 - the (small) ocfs2 queue

 - Minor fixes to kernel/padata.c

 - Maybe half of the MM queue

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits)
  mm, page_alloc: restore the original nodemask if the fast path allocation failed
  mm, page_alloc: uninline the bad page part of check_new_page()
  mm, page_alloc: don't duplicate code in free_pcp_prepare
  mm, page_alloc: defer debugging checks of pages allocated from the PCP
  mm, page_alloc: defer debugging checks of freed pages until a PCP drain
  cpuset: use static key better and convert to new API
  mm, page_alloc: inline pageblock lookup in page free fast paths
  mm, page_alloc: remove unnecessary variable from free_pcppages_bulk
  mm, page_alloc: pull out side effects from free_pages_check
  mm, page_alloc: un-inline the bad part of free_pages_check
  mm, page_alloc: check multiple page fields with a single branch
  mm, page_alloc: remove field from alloc_context
  mm, page_alloc: avoid looking up the first zone in a zonelist twice
  mm, page_alloc: shortcut watermark checks for order-0 pages
  mm, page_alloc: reduce cost of fair zone allocation policy retry
  mm, page_alloc: shorten the page allocator fast path
  mm, page_alloc: check once if a zone has isolated pageblocks
  mm, page_alloc: move __GFP_HARDWALL modifications out of the fastpath
  mm, page_alloc: simplify last cpupid reset
  mm, page_alloc: remove unnecessary initialisation from __alloc_pages_nodemask()
  ...
2016-05-19 20:00:06 -07:00
Hugh Dickins
fd8cfd3000 arch: fix has_transparent_hugepage()
I've just discovered that the useful-sounding has_transparent_hugepage()
is actually an architecture-dependent minefield: on some arches it only
builds if CONFIG_TRANSPARENT_HUGEPAGE=y, on others it's also there when
not, but on some of those (arm and arm64) it then gives the wrong
answer; and on mips alone it's marked __init, which would crash if
called later (but so far it has not been called later).

Straighten this out: make it available to all configs, with a sensible
default in asm-generic/pgtable.h, removing its definitions from those
arches (arc, arm, arm64, sparc, tile) which are served by the default,
adding #define has_transparent_hugepage has_transparent_hugepage to
those (mips, powerpc, s390, x86) which need to override the default at
runtime, and removing the __init from mips (but maybe that kind of code
should be avoided after init: set a static variable the first time it's
called).

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Vineet Gupta <vgupta@synopsys.com>		[arch/arc]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>	[arch/s390]
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19 19:12:14 -07:00
Linus Torvalds
e0fb1b3639 IOMMU Updates for Linux v4.7
The updates include:
 
 	* Rate limiting for the VT-d fault handler
 
 	* Remove statistics code from the AMD IOMMU driver. It is unused
 	  and should be replaced by something more generic if needed
 
 	* Per-domain pagesize-bitmaps in IOMMU core code to support
 	  systems with different types of IOMMUs
 
 	* Support for ACPI devices in the AMD IOMMU driver
 
 	* 4GB mode support for Mediatek IOMMU driver
 
 	* ARM-SMMU updates from Will Deacon:
 
 		- Support for 64k pages with SMMUv1 implementations
 		  (e.g MMU-401)
 
 		- Remove open-coded 64-bit MMIO accessors
 
 		- Initial support for 16-bit VMIDs, as supported by some
 		  ThunderX SMMU implementations
 
 		- A couple of errata workarounds for silicon in the
 		  field
 
 	* Various fixes here and there
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJXPeM1AAoJECvwRC2XARrjA2QP/2Cz+pVkpQCuvhAse57eN4rB
 wWXKTjqSFZ4PcA3Vu5yvX6XMv15g46xXFJAhf2spE5//8+xgFfYBgkBRpnqu1brw
 SL6f8A912MnfMRgWqcdKkJNeHbiN0kOvcIQv1J8GNfciqMiyYFhiLP6fFiRmWR/F
 XDBjUeFZ5+Uwf1BAGqw0cVPexeakEbsLHUGqxFsh5g2T4i43aHzO2HJT3IdwWHDt
 F2ivs8gNFGBeJEyzhW8TD0rOEEyHAnM3N18qPEU9+dD0UmjnTQPymEZSbsGW5d4j
 Cn40QYlA+Zmbwgx6LaDVChzQyRJu6O3uvFThyRviiYKCri/Nc9cUT4vHsFGU4MXb
 1d3bqrgzaw7vw31BN7S1Py3MV+WpVnEYjFm2O+hW28OjtSpm6ZvbI8wc0rF4UT/I
 KgL0gSeA8tp25uVISM+ktpIrObYsAcoCz8nvurpDv2AGkKRzhyoSze0Jg43rusD8
 BH7iFWu1LRPlulTGlrHMtNmbZeEApUPbObcQAOcrBOj9vjuFaZ8qduZmB+hwS2iV
 p9atn+54LmGO0LuzqsGrhApIeXTeTZSrGyjlbUADWBJlTw8Xyk/CR39Wf3m/Xmpr
 DiJ/5oa8SKQtNbwvbScn1+sInNWP/pH/JgnRO3Yvqth8HWF/DlpzNj5XxAB8czwr
 qjk9WjpEXun50ocPFQeS
 =jpPD
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "The updates include:

   - rate limiting for the VT-d fault handler

   - remove statistics code from the AMD IOMMU driver.  It is unused and
     should be replaced by something more generic if needed

   - per-domain pagesize-bitmaps in IOMMU core code to support systems
     with different types of IOMMUs

   - support for ACPI devices in the AMD IOMMU driver

   - 4GB mode support for Mediatek IOMMU driver

   - ARM-SMMU updates from Will Deacon:
      - support for 64k pages with SMMUv1 implementations (e.g MMU-401)
      - remove open-coded 64-bit MMIO accessors
      - initial support for 16-bit VMIDs, as supported by some ThunderX
        SMMU implementations
      - a couple of errata workarounds for silicon in the field

   - various fixes here and there"

* tag 'iommu-updates-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (44 commits)
  iommu/arm-smmu: Use per-domain page sizes.
  iommu/amd: Remove statistics code
  iommu/dma: Finish optimising higher-order allocations
  iommu: Allow selecting page sizes per domain
  iommu: of: enforce const-ness of struct iommu_ops
  iommu: remove unused priv field from struct iommu_ops
  iommu/dma: Implement scatterlist segment merging
  iommu/arm-smmu: Clear cache lock bit of ACR
  iommu/arm-smmu: Support SMMUv1 64KB supplement
  iommu/arm-smmu: Decouple context format from kernel config
  iommu/arm-smmu: Tidy up 64-bit/atomic I/O accesses
  io-64-nonatomic: Add relaxed accessor variants
  iommu/arm-smmu: Work around MMU-500 prefetch errata
  iommu/arm-smmu: Convert ThunderX workaround to new method
  iommu/arm-smmu: Differentiate specific implementations
  iommu/arm-smmu: Workaround for ThunderX erratum #27704
  iommu/arm-smmu: Add support for 16 bit VMID
  iommu/amd: Move get_device_id() and friends to beginning of file
  iommu/amd: Don't use IS_ERR_VALUE to check integer values
  iommu/amd: Signedness bug in acpihid_device_group()
  ...
2016-05-19 17:07:04 -07:00
Linus Torvalds
7afd16f882 PCI changes for the v4.7 merge window:
Enumeration
     Refine PCI support check in pcibios_init() (Adrian-Ken Rueegsegger)
     Provide common functions for ECAM mapping (Jayachandran C)
     Allow all PCIe services on non-ACPI host bridges (Jon Derrick)
     Remove return values from pcie_port_platform_notify() and relatives (Jon Derrick)
     Widen portdrv service type from 4 bits to 8 bits (Keith Busch)
     Add Downstream Port Containment portdrv service type (Keith Busch)
     Add Downstream Port Containment driver (Keith Busch)
 
   Resource management
     Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs (Alex Williamson)
     Supply CPU physical address (not bus address) to iomem_is_exclusive() (Bjorn Helgaas)
     alpha: Call iomem_is_exclusive() for IORESOURCE_MEM, but not IORESOURCE_IO (Bjorn Helgaas)
     Mark Broadwell-EP Home Agent 1 as having non-compliant BARs (Prarit Bhargava)
     Disable all BAR sizing for devices with non-compliant BARs (Prarit Bhargava)
     Move PCI I/O space management from OF to PCI core code (Tomasz Nowicki)
 
   PCI device hotplug
     acpiphp_ibm: Avoid uninitialized variable reference (Dan Carpenter)
     Use cached copy of PCI_EXP_SLTCAP_HPC bit (Lukas Wunner)
 
   Virtualization
     Mark Intel i40e NIC INTx masking as broken (Alex Williamson)
     Reverse standard ACS vs device-specific ACS enabling (Alex Williamson)
     Work around Intel Sunrise Point PCH incorrect ACS capability (Alex Williamson)
 
   IOMMU
     Add pci_add_dma_alias() to abstract implementation (Bjorn Helgaas)
     Move informational printk to pci_add_dma_alias() (Bjorn Helgaas)
     Add support for multiple DMA aliases (Jacek Lawrynowicz)
     Add DMA alias quirk for mic_x200_dma (Jacek Lawrynowicz)
 
   Thunderbolt
     Fix double free of drom buffer (Andreas Noever)
     Add Intel Thunderbolt device IDs (Lukas Wunner)
     Fix typos and magic number (Lukas Wunner)
     Support 1st gen Light Ridge controller (Lukas Wunner)
 
   Generic host bridge driver
     Use generic ECAM API (Jayachandran C)
 
   Cavium ThunderX host bridge driver
     Don't clobber read-only bits in bridge config registers (David Daney)
     Use generic ECAM API (Jayachandran C)
 
   Freescale i.MX6 host bridge driver
     Use enum instead of bool for variant indicator (Andrey Smirnov)
     Implement reset sequence for i.MX6+ (Andrey Smirnov)
     Factor out ref clock enable (Bjorn Helgaas)
     Add initial imx6sx support (Christoph Fritz)
     Add reset-gpio-active-high boolean property to DT (Petr Štetiar)
     Add DT property for link gen, default to Gen1 (Tim Harvey)
     dts: Specify imx6qp version of PCIe core (Andrey Smirnov)
     dts: Fix PCIe reset GPIO polarity on Toradex Apalis Ixora (Petr Štetiar)
 
   Marvell Armada host bridge driver
     add DT binding for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)
     Add driver for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)
 
   Marvell MVEBU host bridge driver
     Constify mvebu_pcie_pm_ops structure (Jisheng Zhang)
     Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS for mvebu_pcie_pm_ops (Jisheng Zhang)
 
   Microsoft Hyper-V host bridge driver
     Report resources release after stopping the bus (Vitaly Kuznetsov)
     Add explicit barriers to config space access (Vitaly Kuznetsov)
 
   Renesas R-Car host bridge driver
     Select PCI_MSI_IRQ_DOMAIN (Arnd Bergmann)
 
   Synopsys DesignWare host bridge driver
     Remove incorrect RC memory base/limit configuration (Gabriele Paoloni)
     Move Root Complex setup code to dw_pcie_setup_rc() (Jisheng Zhang)
 
   TI Keystone host bridge driver
     Add error IRQ handler (Murali Karicheri)
     Remove unnecessary goto statement (Murali Karicheri)
 
   Miscellaneous
     Fix spelling errors (Colin Ian King)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXPdMKAAoJEFmIoMA60/r8ofUP/j0zyzn24f0xY1wLeGJ8geB9
 6nHk1QdkPqwCiXZahEcnA5HMlFCl/ciWjjsoCqeMlvS6NXkX13KGcc1UGZszelTs
 68bFhyBKqcoMn0it53vBjBXnkfA64PmlxwY/T1ADulxL8amFOCpjjBruZ8pxJ/U7
 r6uHvhxUxHCRF7hMmpNN+V5XWXWCFFkPJZvxOTkglaxkbdnhZ0h0Xz9p9liUvjPH
 mBE72E3WUjiGogXGoLAPDclz1NI6rhRVUyTRcQ8EWaOwitV3OqMuDpAwoWH62ZZJ
 iorCkQk2/eKfN6OA6UgZh4loauAty0FeoZDX7ZVftQr52IpAzRUVx1oAq0J7u4ga
 KRX37mlK/53UcMZyv9Lz2kw4KjaLLELiInzcF+w3Bbov4UhY4/sL5uh9eNMFvSUU
 iZuY+GFlceL0P6wZuVKU5U8td/CyBr3f5vY/3htxuYHE1xJq4FkL92JpWRCvwpVr
 YdCzocscw73Yn8ZMplt8DX2fyabN7HyGezbQISrDDGY6T0ZDsRRKc6FFAt4xF+ta
 JJ+bcY8OcXtxGw6SXtrscL7vNXdR7Zg1HBSa8Sl/CopCdW9zs0VdwgFoxgORcWDT
 mphIgt57DMzaiUUaV8FRQz0mSLixnAcCEfGjVbAEEw3SP5ZChGfS3EknKb/CPRyk
 TD6I3pXTBhTWXd8aS113
 =68Iz
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Refine PCI support check in pcibios_init() (Adrian-Ken Rueegsegger)
   - Provide common functions for ECAM mapping (Jayachandran C)
   - Allow all PCIe services on non-ACPI host bridges (Jon Derrick)
   - Remove return values from pcie_port_platform_notify() and relatives (Jon Derrick)
   - Widen portdrv service type from 4 bits to 8 bits (Keith Busch)
   - Add Downstream Port Containment portdrv service type (Keith Busch)
   - Add Downstream Port Containment driver (Keith Busch)

  Resource management:
   - Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs (Alex Williamson)
   - Supply CPU physical address (not bus address) to iomem_is_exclusive() (Bjorn Helgaas)
   - alpha: Call iomem_is_exclusive() for IORESOURCE_MEM, but not IORESOURCE_IO (Bjorn Helgaas)
   - Mark Broadwell-EP Home Agent 1 as having non-compliant BARs (Prarit Bhargava)
   - Disable all BAR sizing for devices with non-compliant BARs (Prarit Bhargava)
   - Move PCI I/O space management from OF to PCI core code (Tomasz Nowicki)

  PCI device hotplug:
   - acpiphp_ibm: Avoid uninitialized variable reference (Dan Carpenter)
   - Use cached copy of PCI_EXP_SLTCAP_HPC bit (Lukas Wunner)

  Virtualization:
   - Mark Intel i40e NIC INTx masking as broken (Alex Williamson)
   - Reverse standard ACS vs device-specific ACS enabling (Alex Williamson)
   - Work around Intel Sunrise Point PCH incorrect ACS capability (Alex Williamson)

  IOMMU:
   - Add pci_add_dma_alias() to abstract implementation (Bjorn Helgaas)
   - Move informational printk to pci_add_dma_alias() (Bjorn Helgaas)
   - Add support for multiple DMA aliases (Jacek Lawrynowicz)
   - Add DMA alias quirk for mic_x200_dma (Jacek Lawrynowicz)

  Thunderbolt:
   - Fix double free of drom buffer (Andreas Noever)
   - Add Intel Thunderbolt device IDs (Lukas Wunner)
   - Fix typos and magic number (Lukas Wunner)
   - Support 1st gen Light Ridge controller (Lukas Wunner)

  Generic host bridge driver:
   - Use generic ECAM API (Jayachandran C)

  Cavium ThunderX host bridge driver:
   - Don't clobber read-only bits in bridge config registers (David Daney)
   - Use generic ECAM API (Jayachandran C)

  Freescale i.MX6 host bridge driver:
   - Use enum instead of bool for variant indicator (Andrey Smirnov)
   - Implement reset sequence for i.MX6+ (Andrey Smirnov)
   - Factor out ref clock enable (Bjorn Helgaas)
   - Add initial imx6sx support (Christoph Fritz)
   - Add reset-gpio-active-high boolean property to DT (Petr Štetiar)
   - Add DT property for link gen, default to Gen1 (Tim Harvey)
   - dts: Specify imx6qp version of PCIe core (Andrey Smirnov)
   - dts: Fix PCIe reset GPIO polarity on Toradex Apalis Ixora (Petr Štetiar)

  Marvell Armada host bridge driver:
   - add DT binding for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)
   - Add driver for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)

  Marvell MVEBU host bridge driver:
   - Constify mvebu_pcie_pm_ops structure (Jisheng Zhang)
   - Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS for mvebu_pcie_pm_ops (Jisheng Zhang)

  Microsoft Hyper-V host bridge driver:
   - Report resources release after stopping the bus (Vitaly Kuznetsov)
   - Add explicit barriers to config space access (Vitaly Kuznetsov)

  Renesas R-Car host bridge driver:
   - Select PCI_MSI_IRQ_DOMAIN (Arnd Bergmann)

  Synopsys DesignWare host bridge driver:
   - Remove incorrect RC memory base/limit configuration (Gabriele Paoloni)
   - Move Root Complex setup code to dw_pcie_setup_rc() (Jisheng Zhang)

  TI Keystone host bridge driver:
   - Add error IRQ handler (Murali Karicheri)
   - Remove unnecessary goto statement (Murali Karicheri)

  Miscellaneous:
   - Fix spelling errors (Colin Ian King)"

* tag 'pci-v4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits)
  PCI: Disable all BAR sizing for devices with non-compliant BARs
  x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARs
  PCI: Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs
  PCI, of: Move PCI I/O space management to PCI core code
  PCI: generic, thunder: Use generic ECAM API
  PCI: Provide common functions for ECAM mapping
  PCI: hv: Add explicit barriers to config space access
  PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit
  PCI: Add Downstream Port Containment driver
  PCI: Add Downstream Port Containment portdrv service type
  PCI: Widen portdrv service type from 4 bits to 8 bits
  PCI: designware: Remove incorrect RC memory base/limit configuration
  PCI: hv: Report resources release after stopping the bus
  ARM: dts: imx6qp: Specify imx6qp version of PCIe core
  PCI: imx6: Implement reset sequence for i.MX6+
  PCI: imx6: Use enum instead of bool for variant indicator
  PCI: thunder: Don't clobber read-only bits in bridge config registers
  thunderbolt: Fix double free of drom buffer
  PCI: rcar: Select PCI_MSI_IRQ_DOMAIN
  PCI: armada: Add driver for Marvell Armada 7K/8K PCIe controller
  ...
2016-05-19 13:10:54 -07:00
Linus Torvalds
a0d3c7c5c0 dmaengine updates for 4.7
This time round the update brings in following changes:
 
  - New tegra driver for ADMA device
  - Support for Xilinx AXI Direct Memory Access Engine and Xilinx AXI Central
    Direct Memory Access Engine and few updates to this driver.
  - New cyclic capability to sun6i and few updates.
  - Slave-sg support in bcm2835.
  - Updates to many drivers like designware, hsu, mv_xor, pxa, edma,
    qcom_hidma & bam.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXPVb9AAoJEHwUBw8lI4NHnDQP/AtUYBTI8XD68iGh5eCTEtwO
 3dNgUmOvIAIl0ZtVKex3b7j2S52IN7EDv44QmsmvMHgjvaupUsZ/HeIHgoI37y39
 /qoRkyiG75ht68BrNjKcpJLsOyxaAUT1tMyf/bYXlDW8O7qEPtRDhuvUB+i+s3RX
 ljNOQXH2WaQTJrNeZxkvbp92iGiu3j7AKyCh9MJ4gnF4y2oA1bFp++QpH5qcBOTp
 0nccs7pgDQhw2nzHmhYbEmvgcKPrPQi+67U7eIed7n7wiThAIXIEbZl6AYk9kFaK
 gSa4/N3fwnZc9TFR5O6qdanvsYdW4JC1P5Ydm0opExo3lgtMckQ3sGKFIwTG8eU4
 YiyQE1uVHRqT82zxPCecTF+I0Y4g68oCJURrHED6kxKGA5a8ojU04aGebXDiNKlp
 FEDceEC5ch7ZPw8CCTola+TYpf9Vni3g7OkrdkPY9cX/aDXDROghTCg9jgPJ2aL/
 oai5axc5gQMEFzHPaEwFp45tgXw7IvIzaqYHmiWE11fsRbGUSB2HAwBXytI9ReC0
 XTMBvc08YvisbIpIR29T0R5cerzdDuK9bXxYHHHOeUFg0t8R8UGaP1UxEQCVmLsT
 AIrHupoccPJ7IAn0h6mShtZ2yzBfj3rU4tEMJR/Oj/VvjW3gKbbZ5XVi92fOurBs
 xjn9uBBZ/Pt9hgprwlmY
 =0Sy7
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This time round the update brings in following changes:

   - new tegra driver for ADMA device

   - support for Xilinx AXI Direct Memory Access Engine and Xilinx AXI
     Central Direct Memory Access Engine and few updates to this driver

   - new cyclic capability to sun6i and few updates

   - slave-sg support in bcm2835

   - updates to many drivers like designware, hsu, mv_xor, pxa, edma,
     qcom_hidma & bam"

* tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (84 commits)
  dmaengine: ioatdma: disable relaxed ordering for ioatdma
  dmaengine: of_dma: approximate an average distribution
  dmaengine: core: Use IS_ENABLED() instead of checking for built-in or module
  dmaengine: edma: Re-evaluate errors when ccerr is triggered w/o error event
  dmaengine: qcom_hidma: add support for object hierarchy
  dmaengine: qcom_hidma: add debugfs hooks
  dmaengine: qcom_hidma: implement lower level hardware interface
  dmaengine: vdma: Add clock support
  Documentation: DT: vdma: Add clock support for dmas
  dmaengine: vdma: Add config structure to differentiate dmas
  MAINTAINERS: Update Tegra DMA maintainers
  dmaengine: tegra-adma: Add support for Tegra210 ADMA
  Documentation: DT: Add binding documentation for NVIDIA ADMA
  dmaengine: vdma: Add Support for Xilinx AXI Central Direct Memory Access Engine
  Documentation: DT: vdma: update binding doc for AXI CDMA
  dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine
  Documentation: DT: vdma: update binding doc for AXI DMA
  dmaengine: vdma: Rename xilinx_vdma_ prefix to xilinx_dma
  dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC
  dmaengine: mv_xor: Allow selecting mv_xor for mvebu only compatible SoC
  ...
2016-05-19 11:47:18 -07:00
Linus Torvalds
7beaa24ba4 Small release overall.
- x86: miscellaneous fixes, AVIC support (local APIC virtualization,
 AMD version)
 
 - s390: polling for interrupts after a VCPU goes to halted state is
 now enabled for s390; use hardware provided information about facility
 bits that do not need any hypervisor activity, and other fixes for
 cpu models and facilities; improve perf output; floating interrupt
 controller improvements.
 
 - MIPS: miscellaneous fixes
 
 - PPC: bugfixes only
 
 - ARM: 16K page size support, generic firmware probing layer for
 timer and GIC
 
 Christoffer Dall (KVM-ARM maintainer) says:
 "There are a few changes in this pull request touching things outside
  KVM, but they should all carry the necessary acks and it made the
  merge process much easier to do it this way."
 
 though actually the irqchip maintainers' acks didn't make it into the
 patches.  Marc Zyngier, who is both irqchip and KVM-ARM maintainer,
 later acked at http://mid.gmane.org/573351D1.4060303@arm.com
 "more formally and for documentation purposes".
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJXPJjyAAoJEL/70l94x66DhioH/j4fwQ0FmfPSM9PArzaFHQdx
 LNE3tU4+bobbsy1BJr4DiAaOUQn3DAgwUvGLWXdeLiOXtoWXBiFHKaxlqEsCA6iQ
 xcTH1TgfxsVoqGQ6bT9X/2GCx70heYpcWG3f+zqBy7ZfFmQykLAC/HwOr52VQL8f
 hUFi3YmTHcnorp0n5Xg+9r3+RBS4D/kTbtdn6+KCLnPJ0RcgNkI3/NcafTemoofw
 Tkv8+YYFNvKV13qlIfVqxMa0GwWI3pP6YaNKhaS5XO8Pu16HuuF1JthJsUBDzwBa
 RInp8R9MoXgsBYhLpz3jc9vWG7G9yDl5LehsD9KOUGOaFYJ7sQN+QZOusa6jFgA=
 =llO5
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "Small release overall.

  x86:
   - miscellaneous fixes
   - AVIC support (local APIC virtualization, AMD version)

  s390:
   - polling for interrupts after a VCPU goes to halted state is now
     enabled for s390
   - use hardware provided information about facility bits that do not
     need any hypervisor activity, and other fixes for cpu models and
     facilities
   - improve perf output
   - floating interrupt controller improvements.

  MIPS:
   - miscellaneous fixes

  PPC:
   - bugfixes only

  ARM:
   - 16K page size support
   - generic firmware probing layer for timer and GIC

  Christoffer Dall (KVM-ARM maintainer) says:
    "There are a few changes in this pull request touching things
     outside KVM, but they should all carry the necessary acks and it
     made the merge process much easier to do it this way."

  though actually the irqchip maintainers' acks didn't make it into the
  patches.  Marc Zyngier, who is both irqchip and KVM-ARM maintainer,
  later acked at http://mid.gmane.org/573351D1.4060303@arm.com ('more
  formally and for documentation purposes')"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (82 commits)
  KVM: MTRR: remove MSR 0x2f8
  KVM: x86: make hwapic_isr_update and hwapic_irr_update look the same
  svm: Manage vcpu load/unload when enable AVIC
  svm: Do not intercept CR8 when enable AVIC
  svm: Do not expose x2APIC when enable AVIC
  KVM: x86: Introducing kvm_x86_ops.apicv_post_state_restore
  svm: Add VMEXIT handlers for AVIC
  svm: Add interrupt injection via AVIC
  KVM: x86: Detect and Initialize AVIC support
  svm: Introduce new AVIC VMCB registers
  KVM: split kvm_vcpu_wake_up from kvm_vcpu_kick
  KVM: x86: Introducing kvm_x86_ops VCPU blocking/unblocking hooks
  KVM: x86: Introducing kvm_x86_ops VM init/destroy hooks
  KVM: x86: Rename kvm_apic_get_reg to kvm_lapic_get_reg
  KVM: x86: Misc LAPIC changes to expose helper functions
  KVM: shrink halt polling even more for invalid wakeups
  KVM: s390: set halt polling to 80 microseconds
  KVM: halt_polling: provide a way to qualify wakeups during poll
  KVM: PPC: Book3S HV: Re-enable XICS fast path for irqfd-generated interrupts
  kvm: Conditionally register IRQ bypass consumer
  ...
2016-05-19 11:27:09 -07:00
Russell King
5632a9fbcd Merge branches 'amba', 'devel-stable', 'kexec-for-next' and 'misc' into for-linus 2016-05-19 10:31:35 +01:00