MTD_NAND is large and encloses much more than what the symbol is
actually used for: raw NAND. Clarify the symbol by naming it
MTD_RAW_NAND instead.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Phytec phyCORE-LPC3250 board is equipped with a Sharp LQ035Q7DB03
3.5" QVGA TFT panel, enable simple panel device driver to get it
supported in the kernel image by default.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Fixed voltage regulators are found on Phytec phyCORE-LPC3250 board,
enable the correspondent device driver by default.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
The change disables a list of GPIO controllers, which to the best
knowledge are not found on any supported NXP LPC32xx powered board.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
NXP LPC32xx SoCs contain an IRAM area, which is supported by
the generic MMIO SRAM driver, enable the driver to be built
by default.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
It is possible to configure NXP LPC32xx powered boards to have
serial consoles on HS UARTs, enable this option by default.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
To make a default built kernel image more advanced include support
of sysrq, dynamic debug, GDB scripts and printed timestamps in
kernel log buffer by default.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
None of the LPC32xx device trees contains any display settings,
it just defines a device tree node for the CLCD (PL11x) left
as "disabled" on lpc3250-ea3250 and "okay" on lpc3250-phy3250
but no panels are attached on any device tree, so the driver
will simply bail out.
I conclude that the hardware is dormant on existing
systems, so we can without any problems switch the defconfig
over from the old ARMCLCD frame buffer driver to the new
PL11x DRM driver.
Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[vzapolskiy: deselected I2C as selected by DRM; fixed SoC name]
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
This simply updates the LPC32xx defconfig against the current
Kconfig structure in the kernel so we can make changed to the
defconfig without disturbing noise.
Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
The SX150X GPIO expander has been moved to pin control and
its Kconfig symbol has been renamed. We used to have a paper-over
thing in Kconfig but it was causing circular dependencies so
I have had to kill it off. Select the right driver instead.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This moves the mcp23s08 driver from gpio to pinctrl. Actual
pinctrl support for configuration of the pull-up resistors
follows in its own patch.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The change enables build of ARM PrimeCell PL17x driver for LPC32xx
platform, the memory controller is commonly used to interface NOR
flash drives.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
The change is a result of "make lpc32xx_defconfig; make savedefconfig"
run, a number of config options are removed:
CONFIG_BINFMT_AOUT=y -- not needed, legacy
CONFIG_FPE_NWFPE=y -- not needed, AEABI build
CONFIG_IPV6_PRIVACY=y -- removed build option
CONFIG_IPV6=y -- selected by default
CONFIG_MII=y -- not needed, board phys don't select library
CONFIG_MTD_CHAR=y -- removed build option
CONFIG_MTD_M25P80=y -- not needed, AT25 EEPROM driver is in use
CONFIG_USB_PHY=y -- selected by default
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
The debug-ll infrastructure can be configured in two ways, either
by selecting a platform specific debug option, or by picking one
of the generic options (8250 or pl01x typically). For compatibility
with multiplatform kernels, we have changed a couple of platforms
to use the former method now when they used to use the latter.
Unfortunately, this broke the defconfigs because now they still
enable CONFIG_DEBUG_LL_UART_PL01X or CONFIG_DEBUG_LL_UART_8250,
and we no longer configure the correct register addresses
automatically.
Embarrassingly, this was only found in linux-next when the
defconfig builds turned up errors for multiple people, and I
had not caught those in my own tests, which were done using
the randconfig fixes patchset on top, and that has a workaround
to avoid a build error when the addresses are not configured.
The error was something like:
.config:2010:warning: symbol value '' invalid for DEBUG_UART_PHYS
.config:2011:warning: symbol value '' invalid for DEBUG_UART_VIRT
This patch avoids the problem by removing the respective
statements from the defconfig files. Any out of tree defconfig
files on the platforms I have changed will have to do the same
change or run into the build error above. Any users that have
a full .config already set the correct DEBUG_UART_PHYS/VIRT
addresses and do not need to change anything.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 4db22c1 ("ARM: debug-ll: rework integrator/versatile handling")
Fixes: f06455f ("ARM: debug-ll: rework ep93xx handling")
Fixes: c047f52 ("ARM: debug-ll: reorganize mvebu debug uart config")
Fixes: 59bd4c3 ("ARM: debug-ll: rework lpc32xx handling")
All defconfigs touched by this patch already enable DEBUG_LL and by
default DEBUG_LL_UART_NONE will be selected. This causes no issues
today because due to some back compatibility magic we eventually need
to remove it is not actually honoured. Nevertheless DEBUG_LL_UART_8250
is the right value for these platforms and should be set in the config
files.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This branch contains platform updates for 3.10. Among the highlights:
- Support for the new Atmel Cortex-A5 based platforms (SAMA5D3)
- New support for CSR SiRFatlas6 SoCs
- A handful of updates for NVidia T114 (a.k.a. Tegra 4)
- A bunch of updates for the shmobile platforms
- A handful of updates for davinci
- A few updates for Qualcomm MSM
- Plus a handful of other patches, defconfig updates, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=HXX3
-----END PGP SIGNATURE-----
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"This branch contains part 1 of the platform updates for 3.10. Among
the highlights:
- Support for the new Atmel Cortex-A5 based platforms (SAMA5D3)
- New support for CSR SiRFatlas6 SoCs
- A handful of updates for NVidia T114 (a.k.a. Tegra 4)
- A bunch of updates for the shmobile platforms
- A handful of updates for davinci
- A few updates for Qualcomm MSM
- Plus a handful of other patches, defconfig updates, etc."
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (135 commits)
ARM: tegra: pm: fix build error w/o PM_SLEEP
ARM: davinci: ensure global variables are declared
ARM: davinci: sram.c: fix incorrect type in assignment
ARM: davinci: da8xx dt: make file local symbols static
ARM: davinci: da8xx: add remoteproc support
ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries
ARM: socfpga: Add clock entries into device tree
ARM: socfpga: Enable soft reset
ARM: EXYNOS: replace cpumask by the corresponding macro
ARM: EXYNOS: handle properly the return values
ARM: EXYNOS: factor out the idle states
ARM: OMAP4: Enable fix for Cortex-A9 erratas
ARM: OMAP2+: Export SoC information to userspace
ARM: OMAP2+: SoC name and revision unification
ARM: OMAP2+: Move common part of late init into common function
ARM: tegra: pm: remove duplicated include from pm.c
ARM: davinci: da850: override mmc DT node device name
ARM: davinci: da850: add mmc DT entries
mmc: davinci_mmc: add DT support
ARM: SAMSUNG: check processor type before cache restoration in resume
...
The Kconfig entry for USB_LPC32XX unconditionally selects USB_ISP1301,
which is now only visible when USB_PHY is also enabled.
This adds an appropriate dependency and enables USB_PHY in the msm
defconfig, avoiding these build errors:
warning: (USB_LPC32XX) selects USB_ISP1301 which has unmet direct dependencies (USB_SUPPORT && USB_PHY && (USB || USB_GADGET) && I2C)
drivers/built-in.o: In function `usb_hcd_nxp_probe':
drivers/usb/host/ohci-nxp.c:224: undefined reference to `isp1301_get_client'
drivers/built-in.o: In function `lpc32xx_udc_probe':
drivers/usb/gadget/lpc32xx_udc.c:3071: undefined reference to `isp1301_get_client'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MTD_NAND_MUSEUM_IDS configuration options was removed - update the
lpc32xx_defconfig file.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Roland Stigge <stigge@antcom.de>
This defconfig patch enables devtmpfs and the mmc spi driver, and does a
cleanup of irrelevant driver comment on this platform
(CONFIG_NET_VENDOR_CHELSIO).
Signed-off-by: Roland Stigge <stigge@antcom.de>
This patch adjusts LPC32xx to new config:
* CONFIG_INPUT_MATRIXKMAP is selected automatically now
* Enabled some GPIO drivers
Signed-off-by: Roland Stigge <stigge@antcom.de>
This defconfig update adds PWM support for the LPC32xx SoC, besides some
adjustments to current Kconfigs.
Signed-off-by: Roland Stigge <stigge@antcom.de>
This defconfig update for LPC32xx adds interrupt and polled gpio keyboard
drivers.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
This defconfig update for the LPC32xx SoC platform adds the new drivers in v3.5
and drivers typically used in systems with the LPC32xx chip.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
This patch updates the defconfig for the LPC32xx SoC after device tree
conversion:
* Adjustment to DT conversion, added new driver support
* Added IPv6
* Increased kernel log buffer
Signed-off-by: Roland Stigge <stigge@antcom.de>
This patch adds a working defconfig for the LPC32XX architecture. It is a
general default configuration for the PHY3250 reference board and others
based on LPC32XX.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Kevin Wells <kevin.wells@nxp.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
