[ Upstream commit e1062fa7292f1e3744db0a487c4ac0109e09b03d ]
The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.
Fixes: b7c2b61570 ("ARM: at91: add Atmel's SAMA5D3 Xplained board")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201118120019.1257580-4-cristian.birsan@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be4dd2d448816a27c1446f8f37fce375daf64148 ]
The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.
Fixes: 38153a0178 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201118120019.1257580-3-cristian.birsan@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ba6291086d2ae8006be9e0f19bf2001a85c9dc1 ]
The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.
Fixes: 1e5f532c27 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201118120019.1257580-2-cristian.birsan@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3e9ced5c93803d5b2ea1942c4bf0192622531d6 ]
kfree(host->card) has been called in put_device so that
another kfree would raise cause a double-free bug.
Fixes: 0193383a58 ("memstick: core: fix device_register() error handling")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20201120074846.31322-1-miaoqinglang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6de7ed693c631d4689acfe90c434147598d75543 ]
A100's pin starts with PB, so it should start with 1.
Fixes: 473436e764 ("pinctrl: sunxi: add support for the Allwinner A100 pin controller")
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Link: https://lore.kernel.org/r/9db51667bf9065be55beafd56e5c319e3bbe8310.1604988979.git.frank@allwinnertech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d8285e604e0221b67bd5db736921b7ddce37d00 ]
Before create CQ, make sure that the requested number of CQEs is in the
supported range.
Fixes: cfdda9d764 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC")
Link: https://lore.kernel.org/r/20201108132007.67537-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11af6de4799ee6eeae3730f18fd417414d212e2d ]
Set the rx_filter in ath11k_mac_config_mon_status_default(),
only when the rx_filter value exists in ath11k_debug_rx_filter().
Without this change, rx_filter gets set to 0 and peer rssi stats
aren't updating properly from firmware.
Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01230-QCAHKSWPL_SILICONZ-4
Fixes: ec48d28ba2 ("ath11k: Fix rx_filter flags setting for per peer rx_stats")
Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1605091117-11005-1-git-send-email-mkenna@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba3e4a2a0b3c639d3835f2f1dce27d79576ae453 ]
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 4524ac56cd ("staging: mfd: add a PMIC driver for HiSilicon 6421 SPMI version")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20201118103724.57451-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59bbf83835f591b95c3bdd09d900f3584fa227af ]
In omap4_keypad_probe, the patch fix several bugs.
1) pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak.
2) In err_unmap, forget to disable runtime of device,
pm_runtime_enable will increase power disable depth. Thus a
pairing decrement is needed on the error handling path to keep
it balanced.
3) In err_pm_disable, it will call pm_runtime_put_sync twice not
one time.
To fix this we factor out code reading revision and disabling touchpad, and
drop PM reference once we are done talking to the device.
Fixes: f77621cc64 ("Input: omap-keypad - dynamically handle register offsets")
Fixes: 5ad567ffba ("Input: omap4-keypad - wire up runtime PM handling")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201120133918.2559681-1-zhangqilong3@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a161ffe4b877721d8917e18e70461d255a090f19 ]
clang static analysis reports this problem
pdr_interface.c:596:6: warning: Branch condition evaluates
to a garbage value
if (!req.service_path[0])
^~~~~~~~~~~~~~~~~~~~
This check that req.service_path was set in an earlier loop.
However req is a stack variable and its initial value
is undefined.
So initialize req to 0.
Fixes: fbe639b44a ("soc: qcom: Introduce Protection Domain Restart helpers")
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20200819184637.15648-1-trix@redhat.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4fa73358c306d747a2200aec6f7acb97e5750e6 ]
The patch fix two reference leak.
1) pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to call put operation will result in
reference leak.
2) The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced.
We fix it by: 1) adding call pm_runtime_put_noidle or
pm_runtime_put_sync in error handling. 2) adding pm_runtime_disable
in error handling, to keep usage counter and disable depth balanced.
Fixes: 88139ed030 ("soc: ti: add Keystone Navigator DMA support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec8684847d8062496c4619bc3fcff31c19d56847 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in knav_queue_probe, so we should fix it.
Fixes: 41f93af900 ("soc: ti: add Keystone Navigator QMSS driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddaff0af653136ee1e0b49116ecf2988c2fc64ca ]
The variable 'tmp' is used multiple times in the brcm_pcie_setup()
function. One such usage did not initialize 'tmp' to the current value
of the target register. By luck the mistake does not currently affect
behavior; regardless 'tmp' is now initialized properly.
Suggested-by: Rafał Miłecki <zajec5@gmail.com>
Link: https://lore.kernel.org/r/20201102205712.23332-1-james.quinlan@broadcom.com
Fixes: c045213703 ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver")
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b6cb81b95d1e8abfb6d32cf194a5bd2992c315c ]
Instead of moving meson_dw_hdmi_init() around which breaks existing
platform, let's enable the clock meson_dw_hdmi_init() depends on.
This means we don't have to worry about this clock being enabled or
not, depending on the boot-loader features.
Fixes: b33340e33acd ("drm/meson: dw-hdmi: Ensure that clocks are enabled before touching the TOP registers")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: changed reported by to kernelci.org bot]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120094205.525228-3-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dfeea904550c11eccf3fd5f6256e4b0f0208dfe ]
The HDMI driver request clocks early, but never disable them, leaving
the clocks on even when the driver is removed.
Fix it by slightly refactoring the clock code, and register a devm
action that will eventually disable/unprepare the enabled clocks.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120094205.525228-2-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 440408dbadfe47a615afd0a0a4a402e629be658a ]
Consider an spi driver with a .probe but without a .remove callback (e.g.
rtc-ds1347). The function spi_drv_probe() is called to bind a device and
so dev_pm_domain_attach() is called. As there is no remove callback
spi_drv_remove() isn't called at unbind time however and so calling
dev_pm_domain_detach() is missed and the pm domain keeps active.
To fix this always use both spi_drv_probe() and spi_drv_remove() and
make them handle the respective callback not being set. This has the
side effect that for a (hypothetical) driver that has neither .probe nor
remove the clk and pm domain setup is done.
Fixes: 33cf00e570 ("spi: attach/detach SPI device to the ACPI power domain")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20201119161604.2633521-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 732b764099f651a088fd931d7b8121b6aa84e62e ]
This patch fixes the following smatch warnings:
drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c:412
sun8i_ce_hash_run() warn: possible memory leak of 'result'
Note: "buf" is leaked as well.
Furthermore, in case of ENOMEM, crypto_finalize_hash_request() was not
called which was an error.
Fixes: 56f6d5aee8 ("crypto: sun8i-ce - support hash algorithms")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff8107200367f4abe0e5bce66a245e8d0f2d229e ]
The pm_runtime_enable will increase power disable depth.
Thus a pairing decrement is needed on the error handling
path to keep it balanced according to context.
Fixes: f7b2b5dd6a ("crypto: omap-aes - add error check for pm_runtime_get_sync")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bdad829c31a09069fd508534f03c2ea1576ac75 ]
Clang warns:
drivers/crypto/amcc/crypto4xx_core.c:921:60: warning: operator '?:' has
lower precedence than '|'; '|' will be evaluated first
[-Wbitwise-conditional-parentheses]
(crypto_tfm_alg_type(req->tfm) == CRYPTO_ALG_TYPE_AEAD) ?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
drivers/crypto/amcc/crypto4xx_core.c:921:60: note: place parentheses
around the '|' expression to silence this warning
(crypto_tfm_alg_type(req->tfm) == CRYPTO_ALG_TYPE_AEAD) ?
^
)
drivers/crypto/amcc/crypto4xx_core.c:921:60: note: place parentheses
around the '?:' expression to evaluate it first
(crypto_tfm_alg_type(req->tfm) == CRYPTO_ALG_TYPE_AEAD) ?
^
(
1 warning generated.
It looks like this should have been a logical OR so that
PD_CTL_HASH_FINAL gets added to the w bitmask if crypto_tfm_alg_type
is either CRYPTO_ALG_TYPE_AHASH or CRYPTO_ALG_TYPE_AEAD. Change the
operator so that everything works properly.
Fixes: 4b5b79998a ("crypto: crypto4xx - fix stalls under heavy load")
Link: https://github.com/ClangBuiltLinux/linux/issues/1198
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56292e8609e39537297a7468dda4d87b9bd81d6a ]
The current memmory-allocation interface causes the following difficulties
for kvfree_rcu():
a) If built with CONFIG_PROVE_RAW_LOCK_NESTING, the lockdep will
complain about violation of the nesting rules, as in "BUG: Invalid
wait context". This Kconfig option checks for proper raw_spinlock
vs. spinlock nesting, in particular, it is not legal to acquire a
spinlock_t while holding a raw_spinlock_t.
This is a problem because kfree_rcu() uses raw_spinlock_t whereas the
"page allocator" internally deals with spinlock_t to access to its
zones. The code also can be broken from higher level of view:
<snip>
raw_spin_lock(&some_lock);
kfree_rcu(some_pointer, some_field_offset);
<snip>
b) If built with CONFIG_PREEMPT_RT, spinlock_t is converted into
sleeplock. This means that invoking the page allocator from atomic
contexts results in "BUG: scheduling while atomic".
c) Please note that call_rcu() is already invoked from raw atomic context,
so it is only reasonable to expaect that kfree_rcu() and kvfree_rcu()
will also be called from atomic raw context.
This commit therefore defers page allocation to a clean context using the
combination of an hrtimer and a workqueue. The hrtimer stage is required
in order to avoid deadlocks with the scheduler. This deferred allocation
is required only when kvfree_rcu()'s per-CPU page cache is empty.
Link: https://lore.kernel.org/lkml/20200630164543.4mdcf6zb4zfclhln@linutronix.de/
Fixes: 3042f83f19 ("rcu: Support reclaim for head-less object")
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2098b4440981705e844c50254540ba7b5f82795 ]
Kim reported that perf-ftrace made his box unhappy. It turns out that
commit:
ff5c4f5cad ("rcu/tree: Mark the idle relevant functions noinstr")
removed one too many notrace qualifiers, probably due to there not being
a helpful comment.
This commit therefore reinstates the notrace and adds a comment to avoid
losing it again.
[ paulmck: Apply Steven Rostedt's feedback on the comment. ]
Fixes: ff5c4f5cad ("rcu/tree: Mark the idle relevant functions noinstr")
Reported-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dbce04d8417ae706596366e16841d77c454ba52 ]
Eugenio managed to tickle #PF from NMI context which resulted in
hitting a WARN in RCU through irqentry_enter() ->
__rcu_irq_enter_check_tick().
However, this situation is perfectly sane and does not warrant an
WARN. The #PF will (necessarily) be atomic and not require messing
with the tick state, so early return is correct. This commit
therefore removes the WARN.
Fixes: aaf2bc50df ("rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()")
Reported-by: "Eugenio Pérez" <eupm90@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8eb456be75af7e5a7ac0cd223eaa198cf7ee2ac1 ]
The following call stack prevents clk_gating at every I/O completion. We
can remove the condition, ufshcd_any_tag_in_use(), since clkgating_work
will check it again.
ufshcd_complete_requests(struct ufs_hba *hba)
ufshcd_transfer_req_compl()
__ufshcd_transfer_req_compl()
__ufshcd_release(hba)
if (ufshcd_any_tag_in_use() == 1)
return;
ufshcd_tmc_handler(hba);
blk_mq_tagset_busy_iter();
Note that this still requires work to deal with a potential race condition
when user sets clkgating.delay_ms to very small value. That can cause
preventing clkgating by the check of ufshcd_any_tag_in_use() in gate_work.
Link: https://lore.kernel.org/r/20201117165839.1643377-7-jaegeuk@kernel.org
Fixes: 7252a36030 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts")
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd62de114f8c9df098dcd43b5d83c5714176dd12 ]
Once UFS is gated with CLKS_OFF, it should not call REQ_CLKS_OFF
again. This can lead to hibern8_enter failure.
Link: https://lore.kernel.org/r/20201117165839.1643377-2-jaegeuk@kernel.org
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8de0c9917cc1297bc5543b61992d5bdee4ce621a ]
The edac_mce_amd module calls decode_dram_ecc() on AMD Family17h and
later systems. This function is used in amd64_edac_mod to do
system-specific decoding for DRAM ECC errors. The function takes a
"NodeId" as a parameter.
In AMD documentation, NodeId is used to identify a physical die in a
system. This can be used to identify a node in the AMD_NB code and also
it is used with umc_normaddr_to_sysaddr().
However, the input used for decode_dram_ecc() is currently the NUMA node
of a logical CPU. In the default configuration, the NUMA node and
physical die will be equivalent, so this doesn't have an impact.
But the NUMA node configuration can be adjusted with optional memory
interleaving modes. This will cause the NUMA node enumeration to not
match the physical die enumeration. The mismatch will cause the address
translation function to fail or report incorrect results.
Use struct cpuinfo_x86.cpu_die_id for the node_id parameter to ensure the
physical ID is used.
Fixes: fbe63acf62 ("EDAC, mce_amd: Use cpu_to_node() to find the node ID")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201109210659.754018-4-Yazen.Ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14639a22de657eabbb776f503a816594393cc935 ]
With commit 3a6f0fb7b8 ("regmap: irq: Add support to clear ack
registers"), the cpcap interrupts are no longer getting acked properly
leading to a very unresponsive device with CPUs fully loaded spinning
in the threaded IRQ handlers.
To me it looks like the clear_ack commit above actually fixed a long
standing bug in regmap_irq_thread() where we unconditionally acked the
interrupts earlier without considering ack_invert. And the issue with
cpcap started happening as we now also consider ack_invert.
Tim Harvey <tharvey@gateworks.com> tried to fix this issue earlier with
"[PATCH v2] regmap: irq: fix ack-invert", but the reading of the ack
register was considered unnecessary for just ack_invert, and we did not
have clear_ack available yet. As the cpcap irqs worked both with and
without ack_invert earlier because of the unconditional ack, the
problem remained hidden until now.
Also, looks like the earlier v3.0.8 based Motorola Android Linux kernel
does clear_ack style read-clear-write with "ireg_val & ~mreg_val" instead
of just ack_invert style write. So let's switch cpcap to use clear_ack
to fix the issue.
Fixes: 3a6f0fb7b8 ("regmap: irq: Add support to clear ack registers")
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Laxminath Kasam <lkasam@codeaurora.org>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-By: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d75846ed08e6f4135ec73778575c34d9c0ace993 ]
'ret' may be 0 so, dev_err_probe() should be called only when 'ret' is
an error code.
Fixes: 41c9c06c49 ("mfd: stmfx: Simplify with dev_err_probe()")
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de1292817cf736c04fab31903a6aa9d9ffe60b79 ]
Currently the Kontron sl28cpld Board Management Controller is found only
on Kontron boards equipped with a Freescale Layerscape SoC. Hence add a
dependency on ARCH_LAYERSCAPE, to prevent asking the user about a driver
for this controller when configuring a kernel without Layerscape support.
Fixes: a538ad229b ("mfd: simple-mfd-i2c: Add sl28cpld support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a463284706c5217872c3cadaca863d47129bd95 ]
htcpld_register_chip_i2c() misses to call i2c_put_adapter() in an error
path. Add the missed function call to fix it.
Fixes: 6048a3dd23 ("mfd: Add HTCPLD driver")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a40fdaf1420d6e6bda0dd2df1e6806013e58dbe1 ]
This reverts commit a0ff72f9f5.
Since the commit b015f6bc95 ("powerpc/pseries: Add cpu DLPAR
support for drc-info property"), the 'cpu_drcs' wouldn't be double
freed when the 'cpus' node not found.
So we needn't apply this patch, otherwise, the memory will be leaked.
Fixes: a0ff72f9f5 ("powerpc/pseries/hotplug-cpu: Remove double free in error path")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
[mpe: Caused by me applying a patch to a function that had changed in the interim]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111020752.1686139-1-zhangxiaoxu5@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbee028da69d31cb927142e2828710de55a49f2a ]
The mismatch lead to a miscalculation of regions in another patch, and
shouldn't be mismatched anyway, so make them consistent.
Fixes: 575640201e ("ARM: dts: aspeed: tacoma: Use 64MB for firmware memory")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201022014731.2035438-2-andrew@aj.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78665179e569c7e1fe102fb6c21d0f5b6951f084 ]
On 8xx, we get the following features:
[ 0.000000] cpu_features = 0x0000000000000100
[ 0.000000] possible = 0x0000000000000120
[ 0.000000] always = 0x0000000000000000
This is not correct. As CONFIG_PPC_8xx is mutually exclusive with all
other configurations, the three lines should be equal.
The problem is due to CPU_FTRS_GENERIC_32 which is taken when
CONFIG_BOOK3S_32 is NOT selected. This CPU_FTRS_GENERIC_32 is
pointless because there is no generic configuration supporting
all 32 bits but book3s/32.
Remove this pointless generic features definition to unbreak the
calculation of 'possible' features and 'always' features.
Fixes: 76bc080ef5 ("[POWERPC] Make default cputable entries reflect selected CPU family")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/76a85f30bf981d1aeaae00df99321235494da254.1604426550.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7223f5bfcaeade4a86d35263493bcda6c940891 ]
Commit 7053f80d96 ("powerpc/64: Prevent stack protection in early
boot") introduced a couple of uses of __attribute__((optimize)) with
function scope, to disable the stack protector in some early boot
code.
Unfortunately, and this is documented in the GCC man pages [0],
overriding function attributes for optimization is broken, and is only
supported for debug scenarios, not for production: the problem appears
to be that setting GCC -f flags using this method will cause it to
forget about some or all other optimization settings that have been
applied.
So the only safe way to disable the stack protector is to disable it
for the entire source file.
[0] https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html
Fixes: 7053f80d96 ("powerpc/64: Prevent stack protection in early boot")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
[mpe: Drop one remaining use of __nostackprotector, reported by snowpatch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201028080433.26799-1-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6016df8fe874e1cf36f6357d71438b384198ce06 ]
The selftests/bpf Makefile includes system include directories from
the host, when building BPF programs. On RISC-V glibc requires that
__riscv_xlen is defined. This is not the case for "clang -target bpf",
which messes up __WORDSIZE (errno.h -> ... -> wordsize.h) and breaks
the build.
By explicitly defining __risc_xlen correctly for riscv, we can
workaround this.
Fixes: 167381f3ea ("selftests/bpf: Makefile fix "missing" headers on build with -idirafter")
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20201118071640.83773-2-bjorn.topel@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03fc41afaa6549baa2dab7a84e1afaf5cadb5b18 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in mxs_spi_probe, so we should fix it.
Fixes: b7969caf41 ("spi: mxs: implement runtime pm")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201106012421.95420-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4d0b39c842585c74bce8f8a80553369181b72df ]
Functions parse_ev_cfg() and parse_ch_cfg() access mhi_cntrl->mhi_dev
before it is set in function mhi_register_controller(),
use cntrl_dev instead of mhi_dev.
Fixes: 0cbf260820 ("bus: mhi: core: Add support for registering MHI controllers")
Signed-off-by: Carl Yin <carl.yin@quectel.com>
Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b627c25e70816a5e1dca940444b5029065b4d60 ]
There is double acquisition of the pm_lock from mhi_driver_remove()
function. Remove the read_lock_bh/read_unlock_bh calls for pm_lock
taken during a call to mhi_device_put() as the lock is acquired
within the function already. This will help avoid a potential
kernel panic.
Fixes: 189ff97cca ("bus: mhi: core: Add support for data transfer")
Reported-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03e2c9c782f721b661a0e42b1b58f394b5298544 ]
req->sample[1] is not naturally aligned at word boundary, and therefore we
should use get_unaligned_be16() when accessing it.
Fixes: 3eac5c7e44 ("Input: ads7846 - extend the driver for ads7845 controller support")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 820830ec918f6c3dcd77a54a1c6198ab57407916 ]
In some rare cases the 32 bit Rt value will overflow if z2 and x is max,
z1 is minimal value and x_plate_ohms is relatively high (for example 800
ohm). This would happen on some screen age with low pressure.
There are two possible fixes:
- make Rt 64bit
- reorder calculation to avoid overflow
The second variant seems to be preferable, since 64 bit calculation on
32 bit system is a bit more expensive.
Fixes: ffa458c1bd ("spi: ads7846 driver")
Co-developed-by: David Jander <david@protonic.nl>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20201113112240.1360-1-o.rempel@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e52cd628a03f72a547dbf90ccb703ee64800504a ]
If touchscreen is released while busy reading HWMON device, the release
can be missed. The IRQ thread is not started because no touch is active
and BTN_TOUCH release event is never sent.
Fixes: f5a28a7d48 ("Input: ads7846 - avoid pen up/down when reading hwmon")
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20201027105416.18773-1-o.rempel@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68dd9d89eaf56dfab8d46bf25610aa4650247617 ]
Commit 6ee1b77ba3 ("iommu/vt-d: Add svm/sva invalidate function")
introduced intel_iommu_sva_invalidate() when CONFIG_INTEL_IOMMU_SVM.
This function uses the dedicated static variable inv_type_granu_table
and functions to_vtd_granularity() and to_vtd_size().
These parts are unused when !CONFIG_INTEL_IOMMU_SVM, and hence,
make CC=clang W=1 warns with an -Wunused-function warning.
Include these parts conditionally on CONFIG_INTEL_IOMMU_SVM.
Fixes: 6ee1b77ba3 ("iommu/vt-d: Add svm/sva invalidate function")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201115205951.20698-1-lukas.bulwahn@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a207228bdf0a4933b794c944d7111564353ea94 ]
The Intel Keem Bay audio module is only present on Intel Keem Bay SoCs.
Hence add a dependency on ARCH_KEEMBAY, to prevent asking the user about
this driver when configuring a kernel without Intel Keem Bay platform
support.
Fixes: c544912bcc ("ASoC: Intel: Add makefiles and kconfig changes for KeemBay")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201110145001.3280479-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
