There are multiple scenarios where the HMAT may contain information
about proximity domains that are not currently online. Rather than fail
to report any HMAT data just elide those offline domains.
If and when those domains are later onlined they can be added to the
HMEM reporting at that point.
This was found while testing EFI_MEMORY_SP support which reserves
"specific purpose" memory from the general allocation pool. If that
reservation results in an empty numa-node then the node is not marked
online leading a spurious:
"acpi/hmat: Ignoring HMAT: Invalid table"
...result for HMAT parsing.
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some of the memory nodes described in HMAT may not be online at the
time the HMAT subsystem parses their nodes' attributes. Should the node be
set to online later, as can happen when using PMEM as RAM after boot, the
nodes will be missing their initiator links and performance attributes.
Regsiter a memory notifier callback and register the memory attributes
the first time its node is brought online if it wasn't registered.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Instead of registering the HMAT cache attributes in line with parsing
the table, save the attributes in the memory target and register them
after parsing completes. This will make it easier to register the
attributes later when hot add is supported.
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some platforms define their processors in this manner:
Device (SCK0)
{
Name (_HID, "ACPI0004" /* Module Device */) // _HID: Hardware ID
Name (_UID, "CPUSCK0") // _UID: Unique ID
Processor (CP00, 0x00, 0x00000410, 0x06){}
Processor (CP01, 0x02, 0x00000410, 0x06){}
Processor (CP02, 0x04, 0x00000410, 0x06){}
Processor (CP03, 0x06, 0x00000410, 0x06){}
Processor (CP04, 0x01, 0x00000410, 0x06){}
Processor (CP05, 0x03, 0x00000410, 0x06){}
Processor (CP06, 0x05, 0x00000410, 0x06){}
Processor (CP07, 0x07, 0x00000410, 0x06){}
Processor (CP08, 0xFF, 0x00000410, 0x06){}
Processor (CP09, 0xFF, 0x00000410, 0x06){}
Processor (CP0A, 0xFF, 0x00000410, 0x06){}
Processor (CP0B, 0xFF, 0x00000410, 0x06){}
...
The processors marked as 0xff are invalid, there are only 8 of them in
this case.
So do not print an error on ids == 0xff, just print an info message.
Actually, we could return ENODEV even on the first CPU with ID 0xff, but
ACPI spec does not forbid the 0xff value to be a processor ID. Given
0xff could be a correct one, we would break working systems if we
returned ENODEV.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add an acpi_handle_debug() statement to acpi_device_set_power() to
allow ACPI device power state changes to be tracked.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to Section 3.5 of the "Intel Low Power S0 Idle" document [1],
Function 5 of the LPS0 _DSM is expected to be invoked when the system
configuration matches the criteria for entering the target low-power
state of the platform. In particular, this means that all devices
should be suspended and in low-power states already when that function
is invoked.
This is not the case currently, however, because Function 5 of the
LPS0 _DSM is invoked by it before the "noirq" phase of device suspend,
which means that some devices may not have been put into low-power
states yet at that point. That is a consequence of the previous
design of the suspend-to-idle flow that allowed the "noirq" phase of
device suspend and the "noirq" phase of device resume to be carried
out for multiple times while "suspended" (if any spurious wakeup
events were detected) and the point of the LPS0 _DSM Function 5
invocation was chosen so as to call it (and LPS0 _DSM Function 6
analogously) once per suspend-resume cycle (regardless of how many
times the "noirq" phases of device suspend and resume were carried
out while "suspended").
Now that the suspend-to-idle flow has been redesigned to carry out
the "noirq" phases of device suspend and resume once in each cycle,
the code can be reordered to follow the specification that it is
based on more closely.
For this purpose, add ->prepare_late and ->restore_early platform
callbacks for suspend-to-idle, to be executed, respectively, after
the "noirq" phase of suspending devices and before the "noirq"
phase of resuming them and make ACPI use them for the invocation
of LPS0 _DSM functions as appropriate.
While at it, move the LPS0 entry requirements check to be made
before invoking Functions 3 and 5 of the LPS0 _DSM (also once
per cycle) as follows from the specification [1].
Link: https://uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf # [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Add a pm_pr_dbg() debug statement to acpi_ec_dispatch_gpe() to print
a message when the EC GPE has been dispatched (because its status
was set).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Move some routines, including acpi_ec_dispatch_gpe(), that are only
used if CONFIG_PM_SLEEP is set to the #ifdef block containing the EC
suspend and resume callbacks, to make the "full EC PM picture" easier
to follow.
While at it, move the header of acpi_ec_dispatch_gpe() in the
header file to a CONFIG_PM_SLEEP #ifdef block.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Change acpi_ec_suspend() to use pm_suspend_no_platform() instead of
acpi_sleep_no_ec_events(), which allows the latter to be eliminated
along with the s2idle_in_progress variable which is only used by it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Since the ACPI SCI is set up for system wakeup before the "noirq"
suspend of devices, it is better to make suspend-to-idle follow
suspend-to-RAM (S3) and switch over the EC to polling during "noirq"
suspend (and back to interrupt-based flow during "noirq" resume).
The frequency of spurious wakeup interrupts from the EC may be
reduced this way.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Add a module parameter to prevent the ACPI LPS0 _DSM functions
from being invoked (if need be) and rework the suspend-to-idle
blacklist entries in acpisleep_dmi_table[] to make them simply
prevent suspend-to-idle from being used by default on the systems
in question (which really is the original purpose of those entries).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
To allow a subsequent change to be simpler, rearrange the code in
lps0_device_attach() to reduce the indentation level and (while
at it) make it avoid calling lpi_device_get_constraints() when
lps0_device_handle is not going to be set.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Commit 36a2ba0775 ("ACPI/IORT: Reject platform device creation on NUMA
node mapping failure") introduced a local variable 'node' in
arm_smmu_v3_set_proximity() that shadows the struct acpi_iort_node
pointer function parameter.
Execution was unaffected but it is prone to errors and can lead
to subtle bugs.
Rename the local variable to prevent any issue.
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
This is a missed part of the commit 5b53696a30
("ACPI / APEI: Switch to use new generic UUID API"), i.e.
replacing old definition with a global constant variable.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Let's document why the lock is not needed in acpi_scan_init(), right now
this is not really obvious.
[akpm@linux-foundation.org: fix tpyo]
Link: http://lkml.kernel.org/r/20190731135306.31524-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit f850a48a07 ("ACPI: PM: Allow transitions to D0 to occur in
special cases") overlooked the fact that acpi_power_transition() may
change the power.state value for the target device and if that
happens, it may confuse acpi_device_set_power() and cause it to
omit the _PS0 evaluation which on some systems is necessary to
change power states of devices from low-power to D0.
Fix that by saving the current value of power.state for the
target device before passing it to acpi_power_transition() and
using the saved value in a subsequent check.
Fixes: f850a48a07 ("ACPI: PM: Allow transitions to D0 to occur in special cases")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
The EC GPE needs to be set up for system wakeup only if there is a
driver depending on it, either intel-hid or intel-vbtn, bound to a
button device that is expected to wake up the system from sleep (such
as the power button on some Dell systems, like the XPS13 9360). It
doesn't need to be set up for waking up the system from sleep in any
other cases and whether or not it is expected to wake up the system
from sleep doesn't depend on whether or not the LPS0 device is
present in the ACPI namespace.
For this reason, rearrange the ACPI suspend-to-idle code to make the
drivers depending on the EC GPE wakeup take care of setting it up and
decouple that from the LPS0 device handling.
While at it, make intel-hid and intel-vbtn prepare for system wakeup
only if they are allowed to wake up the system from sleep by user
space (via sysfs).
[Note that acpi_ec_mark_gpe_for_wake() and acpi_ec_set_gpe_wake_mask()
are there to prevent the EC GPE from being disabled by the
acpi_enable_all_wakeup_gpes() call in acpi_s2idle_prepare(), so on
systems with either intel-hid or intel-vbtn this change doesn't
affect any interactions with the hardware or platform firmware.]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
- Fix duplicate device_unregister() calls (multiple threads competing to
do unregister work when scheduling device removal from a sysfs attribute
of the self-same device).
- Fix badblocks registration order bug. Ensure region badblocks are
initialized in advance of namespace registration.
- Fix a deadlock between the bus lock and probe operations.
- Export device-core infrastructure to coordinate async operations via
the device ->dead state.
- Add device-core infrastructure to validate device_lock() usage with
lockdep.
-----BEGIN PGP SIGNATURE-----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=mhIp
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A collection of locking and async operations fixes for v5.3-rc2. These
had been soaking in a branch targeting the merge window, but missed
due to a regression hunt. This fixed up version has otherwise been in
-next this past week with no reported issues.
In order to gain confidence in the locking changes the pull also
includes a debug / instrumentation patch to enable lockdep coverage
for libnvdimm subsystem operations that depend on the device_lock for
exclusion. As mentioned in the changelog it is a hack, but it works
and documents the locking expectations of the sub-system in a way that
others can use lockdep to verify. The driver core touches got an ack
from Greg.
Summary:
- Fix duplicate device_unregister() calls (multiple threads competing
to do unregister work when scheduling device removal from a sysfs
attribute of the self-same device).
- Fix badblocks registration order bug. Ensure region badblocks are
initialized in advance of namespace registration.
- Fix a deadlock between the bus lock and probe operations.
- Export device-core infrastructure to coordinate async operations
via the device ->dead state.
- Add device-core infrastructure to validate device_lock() usage with
lockdep"
* tag 'libnvdimm-fixes-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
driver-core, libnvdimm: Let device subsystems add local lockdep coverage
libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlock
libnvdimm/bus: Stop holding nvdimm_bus_list_mutex over __nd_ioctl()
libnvdimm/bus: Prepare the nd_ioctl() path to be re-entrant
libnvdimm/region: Register badblocks before namespaces
libnvdimm/bus: Prevent duplicate device_unregister() calls
drivers/base: Introduce kill_device()
Static analysis identified that index comparison against ITS entries in
iort_dev_find_its_id() is off by one.
Update the comparison condition and clarify the resulting error
message.
Fixes: 4bf2efd26d ("ACPI: Add new IORT functions to support MSI domain handling")
Link: https://lore.kernel.org/linux-arm-kernel/20190613065410.GB16334@mwanda/
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
After commit 33e4f80ee6 ("ACPI / PM: Ignore spurious SCI wakeups
from suspend-to-idle") the "noirq" phases of device suspend and
resume may run for multiple times during suspend-to-idle, if there
are spurious system wakeup events while suspended. However, this
is complicated and fragile and actually unnecessary.
The main reason for doing this is that on some systems the EC may
signal system wakeup events (power button events, for example) as
well as events that should not cause the system to resume (spurious
system wakeup events). Thus, in order to determine whether or not
a given event signaled by the EC while suspended is a proper system
wakeup one, the EC GPE needs to be dispatched and to start with that
was achieved by allowing the ACPI SCI action handler to run, which
was only possible after calling resume_device_irqs().
However, dispatching the EC GPE this way turned out to take too much
time in some cases and some EC events might be missed due to that, so
commit 68e2201185 ("ACPI: EC: Dispatch the EC GPE directly on
s2idle wake") started to dispatch the EC GPE right after a wakeup
event has been detected, so in fact the full ACPI SCI action handler
doesn't need to run any more to deal with the wakeups coming from the
EC.
Use this observation to simplify the suspend-to-idle control flow
so that the "noirq" phases of device suspend and resume are each
run only once in every suspend-to-idle cycle, which is reported to
significantly reduce power drawn by some systems when suspended to
idle (by allowing them to reach a deep platform-wide low-power state
through the suspend-to-idle flow). [What appears to happen is that
the "noirq" resume of devices after a spurious EC wakeup brings some
devices into a state in which they prevent the platform from reaching
the deep low-power state going forward, even after a subsequent
"noirq" suspend phase, and on some systems the EC triggers such
wakeups already when the "noirq" suspend of devices is running for
the first time in the given suspend/resume cycle, so the platform
cannot reach the deep low-power state at all.]
First, make acpi_s2idle_wake() use the acpi_ec_dispatch_gpe() return
value to determine whether or not the wakeup may have been triggered
by the EC (in which case the system wakeup is canceled and ACPI
events are processed in order to determine whether or not the event
is a proper system wakeup one) and use rearm_wake_irq() (introduced
by a previous change) in it to rearm the ACPI SCI for system wakeup
detection in case the system will remain suspended.
Second, drop acpi_s2idle_sync(), which is not needed any more, and
the corresponding global platform suspend-to-idle callback.
Next, drop the pm_wakeup_pending() check (which is an optimization
only) from __device_suspend_noirq() to prevent it from returning
errors on system wakeups occurring before the "noirq" phase of
device suspend is complete (as in the case of suspend-to-idle it is
not known whether or not these wakeups are suprious at that point),
in order to avoid having to carry out a "noirq" resume of devices
on a spurious system wakeup.
Finally, change the code flow in s2idle_loop() to (1) run the
"noirq" suspend of devices once before starting the loop, (2) check
for spurious EC wakeups (via the platform ->wake callback) for the
first time before calling s2idle_enter(), and (3) run the "noirq"
resume of devices once after leaving the loop.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
The role of the s2idle_wakeup variable is to cause
acpi_pm_wakeup_event() and acpi_pm_notify_handler() to
increment pm_abort_suspend and trigger a wakeup from
suspend-to-idle in case the ACPI SCI wakeup was canceled
by acpi_s2idle_wake().
However, for this purpose it need not be set in acpi_s2idle_wake()
and cleared in acpi_s2idle_sync(), respectively. In fact, it
may be set as early as in acpi_s2idle_prepare() and cleared as
late as in acpi_s2idle_restore(), so do that to allow subsequent
changes to be simpler.
This change is not expected to alter functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
On some systems, if suspend-to-idle is used, the EC may signal system
wakeup events (power button events, for example) as well as events
that should not cause the system to resume and acpi_ec_dispatch_gpe()
needs to be called to determine whether or not the system should
resume then. In particular, if acpi_ec_dispatch_gpe() doesn't detect
any EC events at all, the system should remain suspended, so it is
useful to know when that is the case.
For this reason, make acpi_ec_dispatch_gpe() return a bool value
indicating whether or not any EC events have been detected by it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
In some cases it is useful to know whether or not the
acpi_ev_detect_gpe() called by acpi_dispatch_gpe() has found
the GPE to be active, so return the return value of it (whose
data type is u32) from latter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Merge yet more updates from Andrew Morton:
"The rest of MM and a kernel-wide procfs cleanup.
Summary of the more significant patches:
- Patch series "mm/memory_hotplug: Factor out memory block
devicehandling", v3. David Hildenbrand.
Some spring-cleaning of the memory hotplug code, notably in
drivers/base/memory.c
- "mm: thp: fix false negative of shmem vma's THP eligibility". Yang
Shi.
Fix /proc/pid/smaps output for THP pages used in shmem.
- "resource: fix locking in find_next_iomem_res()" + 1. Nadav Amit.
Bugfix and speedup for kernel/resource.c
- Patch series "mm: Further memory block device cleanups", David
Hildenbrand.
More spring-cleaning of the memory hotplug code.
- Patch series "mm: Sub-section memory hotplug support". Dan
Williams.
Generalise the memory hotplug code so that pmem can use it more
completely. Then remove the hacks from the libnvdimm code which
were there to work around the memory-hotplug code's constraints.
- "proc/sysctl: add shared variables for range check", Matteo Croce.
We have about 250 instances of
int zero;
...
.extra1 = &zero,
in the tree. This is a tree-wide sweep to make all those private
"zero"s and "one"s use global variables.
Alas, it isn't practical to make those two global integers const"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (38 commits)
proc/sysctl: add shared variables for range check
mm: migrate: remove unused mode argument
mm/sparsemem: cleanup 'section number' data types
libnvdimm/pfn: stop padding pmem namespaces to section alignment
libnvdimm/pfn: fix fsdax-mode namespace info-block zero-fields
mm/devm_memremap_pages: enable sub-section remap
mm: document ZONE_DEVICE memory-model implications
mm/sparsemem: support sub-section hotplug
mm/sparsemem: prepare for sub-section ranges
mm: kill is_dev_zone() helper
mm/hotplug: kill is_dev_zone() usage in __remove_pages()
mm/sparsemem: convert kmalloc_section_memmap() to populate_section_memmap()
mm/hotplug: prepare shrink_{zone, pgdat}_span for sub-section removal
mm/sparsemem: add helpers track active portions of a section at boot
mm/sparsemem: introduce a SECTION_IS_EARLY flag
mm/sparsemem: introduce struct mem_section_usage
drivers/base/memory.c: get rid of find_memory_block_hinted()
mm/memory_hotplug: move and simplify walk_memory_blocks()
mm/memory_hotplug: rename walk_memory_range() and pass start+size instead of pfns
mm: make register_mem_sect_under_node() static
...
walk_memory_range() was once used to iterate over sections. Now, it
iterates over memory blocks. Rename the function, fixup the
documentation.
Also, pass start+size instead of PFNs, which is what most callers
already have at hand. (we'll rework link_mem_sections() most probably
soon)
Follow-up patches will rework, simplify, and move walk_memory_blocks()
to drivers/base/memory.c.
Note: walk_memory_blocks() only works correctly right now if the
start_pfn is aligned to a section start. This is the case right now,
but we'll generalize the function in a follow up patch so the semantics
match the documentation.
[akpm@linux-foundation.org: remove unused variable]
Link: http://lkml.kernel.org/r/20190614100114.311-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For good reason, the standard device_lock() is marked
lockdep_set_novalidate_class() because there is simply no sane way to
describe the myriad ways the device_lock() ordered with other locks.
However, that leaves subsystems that know their own local device_lock()
ordering rules to find lock ordering mistakes manually. Instead,
introduce an optional / additional lockdep-enabled lock that a subsystem
can acquire in all the same paths that the device_lock() is acquired.
A conversion of the NFIT driver and NVDIMM subsystem to a
lockdep-validate device_lock() scheme is included. The
debug_nvdimm_lock() implementation implements the correct lock-class and
stacking order for the libnvdimm device topology hierarchy.
Yes, this is a hack, but hopefully it is a useful hack for other
subsystems device_lock() debug sessions. Quoting Greg:
"Yeah, it feels a bit hacky but it's really up to a subsystem to mess up
using it as much as anything else, so user beware :)
I don't object to it if it makes things easier for you to debug."
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/156341210661.292348.7014034644265455704.stgit@dwillia2-desk3.amr.corp.intel.com
persistent memory device that allows a guest VM to use DAX mechanisms to
access a host-file with host-page-cache. It arranges for MAP_SYNC to
be disabled and instead triggers a host fsync() when a 'write-cache
flush' command is sent to the virtual disk device.
- Miscellaneous small fixups.
-----BEGIN PGP SIGNATURE-----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=uAMG
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Primarily just the virtio_pmem driver:
- virtio_pmem
The new virtio_pmem facility introduces a paravirtualized
persistent memory device that allows a guest VM to use DAX
mechanisms to access a host-file with host-page-cache. It arranges
for MAP_SYNC to be disabled and instead triggers a host fsync()
when a 'write-cache flush' command is sent to the virtual disk
device.
- Miscellaneous small fixups"
* tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
virtio_pmem: fix sparse warning
xfs: disable map_sync for async flush
ext4: disable map_sync for async flush
dax: check synchronous mapping is supported
dm: enable synchronous dax
libnvdimm: add dax_dev sync flag
virtio-pmem: Add virtio pmem driver
libnvdimm: nd_region flush callback support
libnvdimm, namespace: Drop uuid_t implementation detail
- Make ACPI table loading work more consistently regardless of the
exact mechanism used for loading a table (Erik Schmauss).
- Get rid of two clang warnings (Arnd Bergmann).
- Add new quirk mechanism to the ACPI backlight driver and use it
to add a quirk for PB Easynote MZ35 (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=PqWP
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.3-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These get rid of two clang warnings, add a new quirk mechanism to the
ACPI backlight driver (and apply it to one machine) and update the
table load object initialization in ACPICA (this is a replacement for
a previously reverted ACPICA commit).
Specifics:
- Make ACPI table loading work more consistently regardless of the
exact mechanism used for loading a table (Erik Schmauss).
- Get rid of two clang warnings (Arnd Bergmann).
- Add new quirk mechanism to the ACPI backlight driver and use it to
add a quirk for PB Easynote MZ35 (Hans de Goede)"
* tag 'acpi-5.3-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35
ACPI: fix false-positive -Wuninitialized warning
ACPI: blacklist: fix clang warning for unused DMI table
ACPICA: Update table load object initialization
Some machines change the brightness themselves when a brightness hotkey
gets pressed, despite us telling them not to. This causes the brightness to
go two steps up / down when the hotkey is pressed. This is esp. a problem
on older machines with only a few brightness levels.
This commit adds a new hw_changes_brightness quirk which makes
acpi_video_device_notify() only call backlight_force_update(...,
BACKLIGHT_UPDATE_HOTKEY) and not do anything else, notifying userspace
that the brightness was changed and leaving it at that fixing the dual
step problem.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204077
Reported-by: Kacper Piwiński <cosiekvfj@o2.pl>
Tested-by: Kacper Piwiński <cosiekvfj@o2.pl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups. Because of this, there is going
to be some merge issues with your tree at the moment, I'll follow up
with the expected resolutions to make it easier for you.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups (will cause build warnings
with s390 and coresight drivers in your tree)
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse
easier due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of merge
issues that Stephen has been patient with me for. Other than the merge
issues, functionality is working properly in linux-next :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
LpRyb3zX29oChFaZkc5a
=XrEZ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse easier
due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of
merge issues that Stephen has been patient with me for"
* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
debugfs: make error message a bit more verbose
orangefs: fix build warning from debugfs cleanup patch
ubifs: fix build warning after debugfs cleanup patch
driver: core: Allow subsystems to continue deferring probe
drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
arch_topology: Remove error messages on out-of-memory conditions
lib: notifier-error-inject: no need to check return value of debugfs_create functions
swiotlb: no need to check return value of debugfs_create functions
ceph: no need to check return value of debugfs_create functions
sunrpc: no need to check return value of debugfs_create functions
ubifs: no need to check return value of debugfs_create functions
orangefs: no need to check return value of debugfs_create functions
nfsd: no need to check return value of debugfs_create functions
lib: 842: no need to check return value of debugfs_create functions
debugfs: provide pr_fmt() macro
debugfs: log errors when something goes wrong
drivers: s390/cio: Fix compilation warning about const qualifiers
drivers: Add generic helper to match by of_node
driver_find_device: Unify the match function with class_find_device()
bus_find_device: Unify the match callback with class_find_device
...
Here is the "large" pull request for char and misc and other assorted
smaller driver subsystems for 5.3-rc1.
It seems that this tree is becoming the funnel point of lots of smaller
driver subsystems, which is fine for me, but that's why it is getting
larger over time and does not just contain stuff under drivers/char/ and
drivers/misc.
Lots of small updates all over the place here from different driver
subsystems:
- habana driver updates
- coresight driver updates
- documentation file movements and updates
- Android binder fixes and updates
- extcon driver updates
- google firmware driver updates
- fsi driver updates
- smaller misc and char driver updates
- soundwire driver updates
- nvmem driver updates
- w1 driver fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSXmoQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylV9wCgyJGbpPch8v/ecrZGFHYS4sIMexIAoMco3zf6
wnqFmXiz1O0tyo1sgV9R
=7sqO
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "large" pull request for char and misc and other assorted
smaller driver subsystems for 5.3-rc1.
It seems that this tree is becoming the funnel point of lots of
smaller driver subsystems, which is fine for me, but that's why it is
getting larger over time and does not just contain stuff under
drivers/char/ and drivers/misc.
Lots of small updates all over the place here from different driver
subsystems:
- habana driver updates
- coresight driver updates
- documentation file movements and updates
- Android binder fixes and updates
- extcon driver updates
- google firmware driver updates
- fsi driver updates
- smaller misc and char driver updates
- soundwire driver updates
- nvmem driver updates
- w1 driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (188 commits)
coresight: Do not default to CPU0 for missing CPU phandle
dt-bindings: coresight: Change CPU phandle to required property
ocxl: Allow contexts to be attached with a NULL mm
fsi: sbefifo: Don't fail operations when in SBE IPL state
coresight: tmc: Smatch: Fix potential NULL pointer dereference
coresight: etm3x: Smatch: Fix potential NULL pointer dereference
coresight: Potential uninitialized variable in probe()
coresight: etb10: Do not call smp_processor_id from preemptible
coresight: tmc-etf: Do not call smp_processor_id from preemptible
coresight: tmc-etr: alloc_perf_buf: Do not call smp_processor_id from preemptible
coresight: tmc-etr: Do not call smp_processor_id() from preemptible
docs: misc-devices: convert files without extension to ReST
fpga: dfl: fme: align PR buffer size per PR datawidth
fpga: dfl: fme: remove copy_to_user() in ioctl for PR
fpga: dfl-fme-mgr: fix FME_PR_INTFC_ID register address.
intel_th: msu: Start read iterator from a non-empty window
intel_th: msu: Split sgt array and pointer in multiwindow mode
intel_th: msu: Support multipage blocks
intel_th: pci: Add Ice Lake NNPI support
intel_th: msu: Fix single mode with disabled IOMMU
...
When CONFIG_DMI is disabled, we only have a tentative declaration,
which causes a warning from clang:
drivers/acpi/blacklist.c:20:35: error: tentative array definition assumed to have one element [-Werror]
static const struct dmi_system_id acpi_rev_dmi_table[] __initconst;
As the variable is not actually used here, hide it entirely
in an #ifdef to shut up the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit c7ef9f3526765bed8930825dda1eed1a274b9668
Use the common internal "initialize objects" interface
Affects:
Load()
load_table()
acpi_load_table
Link: https://github.com/acpica/acpica/commit/c7ef9f35
Tested-by: Rong Chen <rong.a.chen@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert a recent ACPICA commit causing systems to hang at boot time.
-----BEGIN PGP SIGNATURE-----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=+G0G
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a recent ACPICA commit causing systems to hang at boot time"
* tag 'acpi-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPICA: Update table load object initialization"
Revert commit c522ad0637 ("ACPICA: Update table load object
initialization") as it causes systems to hang on attempts to load
OEM ACPI tables.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- A fair pile of RST conversions, many from Mauro. These create more
than the usual number of simple but annoying merge conflicts with other
trees, unfortunately. He has a lot more of these waiting on the wings
that, I think, will go to you directly later on.
- A new document on how to use merges and rebases in kernel repos, and one
on Spectre vulnerabilities.
- Various improvements to the build system, including automatic markup of
function() references because some people, for reasons I will never
understand, were of the opinion that :c:func:``function()`` is
unattractive and not fun to type.
- We now recommend using sphinx 1.7, but still support back to 1.4.
- Lots of smaller improvements, warning fixes, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl0krAEPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yg98H/AuLqO9LpOgUjF4LhyjxGPdzJkY9RExSJ7km
gznyreLCZgFaJR+AY6YDsd4Jw6OJlPbu1YM/Qo3C3WrZVFVhgL/s2ebvBgCo50A8
raAFd8jTf4/mGCHnAqRotAPQ3mETJUk315B66lBJ6Oc+YdpRhwXWq8ZW2bJxInFF
3HDvoFgMf0KhLuMHUkkL0u3fxH1iA+KvDu8diPbJYFjOdOWENz/CV8wqdVkXRSEW
DJxIq89h/7d+hIG3d1I7Nw+gibGsAdjSjKv4eRKauZs4Aoxd1Gpl62z0JNk6aT3m
dtq4joLdwScydonXROD/Twn2jsu4xYTrPwVzChomElMowW/ZBBY=
=D0eO
-----END PGP SIGNATURE-----
Merge tag 'docs-5.3' of git://git.lwn.net/linux
Pull Documentation updates from Jonathan Corbet:
"It's been a relatively busy cycle for docs:
- A fair pile of RST conversions, many from Mauro. These create more
than the usual number of simple but annoying merge conflicts with
other trees, unfortunately. He has a lot more of these waiting on
the wings that, I think, will go to you directly later on.
- A new document on how to use merges and rebases in kernel repos,
and one on Spectre vulnerabilities.
- Various improvements to the build system, including automatic
markup of function() references because some people, for reasons I
will never understand, were of the opinion that
:c:func:``function()`` is unattractive and not fun to type.
- We now recommend using sphinx 1.7, but still support back to 1.4.
- Lots of smaller improvements, warning fixes, typo fixes, etc"
* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
docs: automarkup.py: ignore exceptions when seeking for xrefs
docs: Move binderfs to admin-guide
Disable Sphinx SmartyPants in HTML output
doc: RCU callback locks need only _bh, not necessarily _irq
docs: format kernel-parameters -- as code
Doc : doc-guide : Fix a typo
platform: x86: get rid of a non-existent document
Add the RCU docs to the core-api manual
Documentation: RCU: Add TOC tree hooks
Documentation: RCU: Rename txt files to rst
Documentation: RCU: Convert RCU UP systems to reST
Documentation: RCU: Convert RCU linked list to reST
Documentation: RCU: Convert RCU basic concepts to reST
docs: filesystems: Remove uneeded .rst extension on toctables
scripts/sphinx-pre-install: fix out-of-tree build
docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
Documentation: PGP: update for newer HW devices
Documentation: Add section about CPU vulnerabilities for Spectre
Documentation: platform: Delete x86-laptop-drivers.txt
docs: Note that :c:func: should no longer be used
...
- Add helpers to count items in a property array (Andy Shevchenko).
- Extend "software nodes" support to be more convenient for
representing device properties supplied by drivers (Heikki
Krogerus).
- Add device_find_child_by_name() helper to the driver core (Heikki
Krogerus).
- Extend device connection code to also look for references provided
via fwnode pointers (Heikki Krogerus).
- Start to register proper struct device objects for USB Type-C
muxes and orientation switches (Heikki Krogerus).
- Update the intel_cht_int33fe driver to describe devices in a more
general way with the help of "software nodes" (Heikki Krogerus).
-----BEGIN PGP SIGNATURE-----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=jOFk
-----END PGP SIGNATURE-----
Merge tag 'devprop-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These add helpers for counting items in a property array and extend
the "software nodes" support to be more convenient for representing
device properties supplied by drivers and make the intel_cht_int33fe
driver use that.
Specifics:
- Add helpers to count items in a property array (Andy Shevchenko).
- Extend "software nodes" support to be more convenient for
representing device properties supplied by drivers (Heikki
Krogerus).
- Add device_find_child_by_name() helper to the driver core (Heikki
Krogerus).
- Extend device connection code to also look for references provided
via fwnode pointers (Heikki Krogerus).
- Start to register proper struct device objects for USB Type-C muxes
and orientation switches (Heikki Krogerus).
- Update the intel_cht_int33fe driver to describe devices in a more
general way with the help of "software nodes" (Heikki Krogerus)"
* tag 'devprop-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Add helpers to count items in an array
platform/x86: intel_cht_int33fe: Replacing the old connections with references
platform/x86: intel_cht_int33fe: Supply fwnodes for the external dependencies
platform/x86: intel_cht_int33fe: Provide fwnode for the USB connector
platform/x86: intel_cht_int33fe: Provide software nodes for the devices
platform/x86: intel_cht_int33fe: Remove unused fusb302 device property
platform/x86: intel_cht_int33fe: Register max17047 in its own function
usb: typec: Registering real device entries for the muxes
device connection: Find connections also by checking the references
device property: Introduce fwnode_find_reference()
ACPI / property: Don't limit named child node matching to data nodes
driver core: Add helper device_find_child_by_name()
software node: Add software_node_get_reference_args()
software node: Use kobject name when finding child nodes by name
software node: Add support for static node descriptors
software node: Simplify software_node_release() function
software node: Allow node creation without properties
- Update the ACPICA code in the kernel to upstream revision 20190703
including:
* Initial/defalut namespace creation simplification (Bob Moore).
* Object initialization sequence update (Bob Moore).
* Removal of legacy module-level (dead) code (Erik Schmauss).
* Table load object initialization update (Erik Schmauss, Nikolaus
Voss).
- Fix GPE enabling issue in ACPICA causing premature wakeups from
suspend-to-idle to occur (Rafael Wysocki).
- Allow ACPI AC and battery drivers to be built on non-X86 (Ard
Biesheuvel).
- Fix address space handler removal in the ACPI PMIC driver for
Intel platforms (Andy Shevchenko).
- Allow BGRT to be overridden via initrd or configfs (Andrea Oliveri).
- Fix object resolution on table loads via configfs (Nikolaus Voss).
- Clean up assorted pieces of ACPI code and tools (Colin Ian King,
Liguang Zhang, Masahiro Yamada).
- Fix documentation build warning, convert the extcon document to
ReST and add it to the ACPI documentation (Mauro Carvalho Chehab,
Qian Cai).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl0jLCoSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxbV4P/18Kt/la5KUvOMVOXXIEPes5lEbhQ8m1
BBhRcHOh9GDNXlXkogJSssKo5GlHXBBtN5ipMMFnwyi/gK2V1834nwXG3+gjuUoE
Q9zHTBQDBybBCDDj/EjZeF+AuTMRbeW2bV80+4LgQ2oAQCK5TOG873K1U9iAYTBs
+7KaquWcZKPEzZb6RvaH0+2T/Ihg35Hqutlyp2ly1+h8SzYDwJui4SQwsh0BPrml
ujMveW2dbVsoOsAFJJw3ATsejBeNmaBfK6VtJnBF4eeeCQKfI0auz+OTht22+4gR
NX+Q5/XZdFti7m60fVEc78yhNp2BPCHbR8UNnx3rKpjiVkh8yPG7B4KTgmOwpREW
0BMzGSJIwCkoK89Abf3+NqEk77hEDVljgqLTYAIfKnFmO6SL1OH3bQERFducEp/L
ncBQOMz8FOYAJIbNFTIHA7w/5XYtFsAk+grJMPXiZKi/hOFn4YyuR/8qDNwLq3R9
+g1ggqCPzDrJQ7IiKJ8pwS+kJP2jlp/u7JdWzKJl8FaCtxfk2I6TGQtM/MOR5JJj
tup2v8I8c8ROnv/0aa6jqKYHS+w84xXAjb54BdgGCaU5Oz2Ainoyp0Aa0BVIpjSu
vx9CSF74s9aP7lY8TwAXy7njLz18VNnocQn9zksfl5hJncNCgYOv96mtgeqHsuo6
E811ArtdcHRR
=4FCz
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20190703, fix up the handling of GPEs in ACPICA, allow some more ACPI
code to be built on ARM64 platforms, allow BGRT to be overridden, fix
minor issues and clean up assorted pieces of ACPI code.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20190703
including:
- Initial/default namespace creation simplification (Bob Moore).
- Object initialization sequence update (Bob Moore).
- Removal of legacy module-level (dead) code (Erik Schmauss).
- Table load object initialization update (Erik Schmauss,
Nikolaus Voss).
- Fix GPE enabling issue in ACPICA causing premature wakeups from
suspend-to-idle to occur (Rafael Wysocki).
- Allow ACPI AC and battery drivers to be built on non-X86 (Ard
Biesheuvel).
- Fix address space handler removal in the ACPI PMIC driver for Intel
platforms (Andy Shevchenko).
- Allow BGRT to be overridden via initrd or configfs (Andrea
Oliveri).
- Fix object resolution on table loads via configfs (Nikolaus Voss).
- Clean up assorted pieces of ACPI code and tools (Colin Ian King,
Liguang Zhang, Masahiro Yamada).
- Fix documentation build warning, convert the extcon document to
ReST and add it to the ACPI documentation (Mauro Carvalho Chehab,
Qian Cai)"
* tag 'acpi-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / APEI: Remove needless __ghes_check_estatus() calls
ACPICA: Update version to 20190703
ACPICA: Update table load object initialization
ACPICA: Update for object initialization sequence
ACPICA: remove legacy module-level code due to deprecation
ACPICA: Namespace: simplify creation of the initial/default namespace
ACPI / PMIC: intel: Drop double removal of address space handler
ACPI: APD: remove redundant assignment to pointer clk
docs: extcon: convert it to ReST and move to ACPI dir
ACPI: Make AC and battery drivers available on !X86
ACPICA: Clear status of GPEs on first direct enable
ACPI: configfs: Resolve objects on host-directed table loads
ACPI: tables: Allow BGRT to be overridden
ACPI: OSL: Make a W=1 kernel-doc warning go away
ACPI: tools: Exclude tools/* from .gitignore patterns
- Improve the handling of shared ACPI power resources in the PCI
bus type layer (Mika Westerberg).
- Make the PCI layer take link delays required by the PCIe spec
into account as appropriate and avoid polling devices in D3cold
for PME (Mika Westerberg).
- Fix some corner case issues in ACPI device power management and
in the PCI bus type layer, optimiza and clean up the handling of
runtime-suspended PCI devices during system-wide transitions to
sleep states (Rafael Wysocki).
- Rework hibernation handling in the ACPI core and the PCI bus type
to resume runtime-suspended devices before hibernation (which
allows some functional problems to be avoided) and fix some ACPI
power management issues related to hiberation (Rafael Wysocki).
- Extend the operating performance points (OPP) framework to support
a wider range of devices (Rajendra Nayak, Stehpen Boyd).
- Fix issues related to genpd_virt_devs and issues with platforms
using the set_opp() callback in the OPP framework (Viresh Kumar,
Dmitry Osipenko).
- Add new cpufreq driver for Raspberry Pi (Nicolas Saenz Julienne).
- Add new cpufreq driver for imx8m and imx7d chips (Leonard Crestez).
- Fix and clean up the pcc-cpufreq, brcmstb-avs-cpufreq, s5pv210,
and armada-37xx cpufreq drivers (David Arcari, Florian Fainelli,
Paweł Chmiel, YueHaibing).
- Clean up and fix the cpufreq core (Viresh Kumar, Daniel Lezcano).
- Fix minor issue in the ACPI system sleep support code and export
one function from it (Lenny Szubowicz, Dexuan Cui).
- Clean up assorted pieces of PM code and documentation (Kefeng Wang,
Andy Shevchenko, Bart Van Assche, Greg Kroah-Hartman, Fuqian Huang,
Geert Uytterhoeven, Mathieu Malaterre, Rafael Wysocki).
- Update the pm-graph utility to v5.4 (Todd Brandt).
- Fix and clean up the cpupower utility (Abhishek Goel, Nick Black).
-----BEGIN PGP SIGNATURE-----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=aBN3
-----END PGP SIGNATURE-----
Merge tag 'pm-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update PCI and ACPI power management (improved handling of ACPI
power resources and PCIe link delays, fixes related to corner cases,
hibernation handling rework), fix and extend the operating performance
points (OPP) framework, add new cpufreq drivers for Raspberry Pi and
imx8m chips, update some other cpufreq drivers, clean up assorted
pieces of PM code and documentation and update tools.
Specifics:
- Improve the handling of shared ACPI power resources in the PCI bus
type layer (Mika Westerberg).
- Make the PCI layer take link delays required by the PCIe spec into
account as appropriate and avoid polling devices in D3cold for PME
(Mika Westerberg).
- Fix some corner case issues in ACPI device power management and in
the PCI bus type layer, optimiza and clean up the handling of
runtime-suspended PCI devices during system-wide transitions to
sleep states (Rafael Wysocki).
- Rework hibernation handling in the ACPI core and the PCI bus type
to resume runtime-suspended devices before hibernation (which
allows some functional problems to be avoided) and fix some ACPI
power management issues related to hiberation (Rafael Wysocki).
- Extend the operating performance points (OPP) framework to support
a wider range of devices (Rajendra Nayak, Stehpen Boyd).
- Fix issues related to genpd_virt_devs and issues with platforms
using the set_opp() callback in the OPP framework (Viresh Kumar,
Dmitry Osipenko).
- Add new cpufreq driver for Raspberry Pi (Nicolas Saenz Julienne).
- Add new cpufreq driver for imx8m and imx7d chips (Leonard Crestez).
- Fix and clean up the pcc-cpufreq, brcmstb-avs-cpufreq, s5pv210, and
armada-37xx cpufreq drivers (David Arcari, Florian Fainelli, Paweł
Chmiel, YueHaibing).
- Clean up and fix the cpufreq core (Viresh Kumar, Daniel Lezcano).
- Fix minor issue in the ACPI system sleep support code and export
one function from it (Lenny Szubowicz, Dexuan Cui).
- Clean up assorted pieces of PM code and documentation (Kefeng Wang,
Andy Shevchenko, Bart Van Assche, Greg Kroah-Hartman, Fuqian Huang,
Geert Uytterhoeven, Mathieu Malaterre, Rafael Wysocki).
- Update the pm-graph utility to v5.4 (Todd Brandt).
- Fix and clean up the cpupower utility (Abhishek Goel, Nick Black)"
* tag 'pm-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (57 commits)
ACPI: PM: Make acpi_sleep_state_supported() non-static
PM: sleep: Drop dev_pm_skip_next_resume_phases()
ACPI: PM: Unexport acpi_device_get_power()
Documentation: ABI: power: Add missing newline at end of file
ACPI: PM: Drop unused function and function header
ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS
ACPI: PM: Simplify and fix PM domain hibernation callbacks
PCI: PM: Simplify bus-level hibernation callbacks
PM: ACPI/PCI: Resume all devices during hibernation
cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update()
cpufreq: Consolidate cpufreq_update_current_freq() and __cpufreq_get()
kernel: power: swap: use kzalloc() instead of kmalloc() followed by memset()
cpufreq: Don't skip frequency validation for has_target() drivers
PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete()
PCI / ACPI: Add _PR0 dependent devices
ACPI / PM: Introduce concept of a _PR0 dependent device
PCI / ACPI: Use cached ACPI device state to get PCI device power state
ACPI: PM: Allow transitions to D0 to occur in special cases
ACPI: PM: Avoid evaluating _PS3 on transitions from D3hot to D3cold
cpufreq: Use has_target() instead of !setpolicy
...
Pull x86 CPU feature updates from Thomas Gleixner:
"Updates for x86 CPU features:
- Support for UMWAIT/UMONITOR, which allows to use MWAIT and MONITOR
instructions in user space to save power e.g. in HPC workloads
which spin wait on synchronization points.
The maximum time a MWAIT can halt in userspace is controlled by the
kernel and can be adjusted by the sysadmin.
- Speed up the MTRR handling code on CPUs which support cache
self-snooping correctly.
On those CPUs the wbinvd() invocations can be omitted which speeds
up the MTRR setup by a factor of 50.
- Support for the new x86 vendor Zhaoxin who develops processors
based on the VIA Centaur technology.
- Prevent 'cat /proc/cpuinfo' from affecting isolated NOHZ_FULL CPUs
by sending IPIs to retrieve the CPU frequency and use the cached
values instead.
- The addition and late revert of the FSGSBASE support. The revert
was required as it turned out that the code still has hard to
diagnose issues. Yet another engineering trainwreck...
- Small fixes, cleanups, improvements and the usual new Intel CPU
family/model addons"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
x86/fsgsbase: Revert FSGSBASE support
selftests/x86/fsgsbase: Fix some test case bugs
x86/entry/64: Fix and clean up paranoid_exit
x86/entry/64: Don't compile ignore_sysret if 32-bit emulation is enabled
selftests/x86: Test SYSCALL and SYSENTER manually with TF set
x86/mtrr: Skip cache flushes on CPUs with cache self-snooping
x86/cpu/intel: Clear cache self-snoop capability in CPUs with known errata
Documentation/ABI: Document umwait control sysfs interfaces
x86/umwait: Add sysfs interface to control umwait maximum time
x86/umwait: Add sysfs interface to control umwait C0.2 state
x86/umwait: Initialize umwait control values
x86/cpufeatures: Enumerate user wait instructions
x86/cpu: Disable frequency requests via aperfmperf IPI for nohz_full CPUs
x86/acpi/cstate: Add Zhaoxin processors support for cache flush policy in C3
ACPI, x86: Add Zhaoxin processors support for NONSTOP TSC
x86/cpu: Create Zhaoxin processors architecture support file
x86/cpu: Split Tremont based Atoms from the rest
Documentation/x86/64: Add documentation for GS/FS addressing mode
x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2
x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit
...
Pull irq updates from Thomas Gleixner:
"The irq departement provides the usual mixed bag:
Core:
- Further improvements to the irq timings code which aims to predict
the next interrupt for power state selection to achieve better
latency/power balance
- Add interrupt statistics to the core NMI handlers
- The usual small fixes and cleanups
Drivers:
- Support for Renesas RZ/A1, Annapurna Labs FIC, Meson-G12A SoC and
Amazon Gravition AMR/GIC interrupt controllers.
- Rework of the Renesas INTC controller driver
- ACPI support for Socionext SoCs
- Enhancements to the CSKY interrupt controller
- The usual small fixes and cleanups"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
irq/irqdomain: Fix comment typo
genirq: Update irq stats from NMI handlers
irqchip/gic-pm: Remove PM_CLK dependency
irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver
dt-bindings: interrupt-controller: Add Amazon's Annapurna Labs FIC
softirq: Use __this_cpu_write() in takeover_tasklets()
irqchip/mbigen: Stop printing kernel addresses
irqchip/gic: Add dependency for ARM_GIC_MAX_NR
genirq/affinity: Remove unused argument from [__]irq_build_affinity_masks()
genirq/timings: Add selftest for next event computation
genirq/timings: Add selftest for irqs circular buffer
genirq/timings: Add selftest for circular array
genirq/timings: Encapsulate storing function
genirq/timings: Encapsulate timings push
genirq/timings: Optimize the period detection speed
genirq/timings: Fix timings buffer inspection
genirq/timings: Fix next event index function
irqchip/qcom: Use struct_size() in devm_kzalloc()
irqchip/irq-csky-mpintc: Remove unnecessary loop in interrupt handler
dt-bindings: interrupt-controller: Update csky mpintc
...
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
- Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
manage the permissions of executable vmalloc regions more strictly
- Slight performance improvement by keeping softirqs enabled while
touching the FPSIMD/SVE state (kernel_neon_begin/end)
- Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG
and AXFLAG instructions for floating point comparison flags
manipulation) and FRINT (rounding floating point numbers to integers)
- Re-instate ARM64_PSEUDO_NMI support which was previously marked as
BROKEN due to some bugs (now fixed)
- Improve parking of stopped CPUs and implement an arm64-specific
panic_smp_self_stop() to avoid warning on not being able to stop
secondary CPUs during panic
- perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
platforms
- perf: DDR performance monitor support for iMX8QXP
- cache_line_size() can now be set from DT or ACPI/PPTT if provided to
cope with a system cache info not exposed via the CPUID registers
- Avoid warning on hardware cache line size greater than
ARCH_DMA_MINALIGN if the system is fully coherent
- arm64 do_page_fault() and hugetlb cleanups
- Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
- Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags'
introduced in 5.1)
- CONFIG_RANDOMIZE_BASE now enabled in defconfig
- Allow the selection of ARM64_MODULE_PLTS, currently only done via
RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
over into the vmalloc area
- Make ZONE_DMA32 configurable
-----BEGIN PGP SIGNATURE-----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=0TDT
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
- Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
manage the permissions of executable vmalloc regions more strictly
- Slight performance improvement by keeping softirqs enabled while
touching the FPSIMD/SVE state (kernel_neon_begin/end)
- Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new
XAFLAG and AXFLAG instructions for floating point comparison flags
manipulation) and FRINT (rounding floating point numbers to integers)
- Re-instate ARM64_PSEUDO_NMI support which was previously marked as
BROKEN due to some bugs (now fixed)
- Improve parking of stopped CPUs and implement an arm64-specific
panic_smp_self_stop() to avoid warning on not being able to stop
secondary CPUs during panic
- perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
platforms
- perf: DDR performance monitor support for iMX8QXP
- cache_line_size() can now be set from DT or ACPI/PPTT if provided to
cope with a system cache info not exposed via the CPUID registers
- Avoid warning on hardware cache line size greater than
ARCH_DMA_MINALIGN if the system is fully coherent
- arm64 do_page_fault() and hugetlb cleanups
- Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
- Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the
'arm_boot_flags' introduced in 5.1)
- CONFIG_RANDOMIZE_BASE now enabled in defconfig
- Allow the selection of ARM64_MODULE_PLTS, currently only done via
RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
over into the vmalloc area
- Make ZONE_DMA32 configurable
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
perf: arm_spe: Enable ACPI/Platform automatic module loading
arm_pmu: acpi: spe: Add initial MADT/SPE probing
ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
ACPI/PPTT: Modify node flag detection to find last IDENTICAL
x86/entry: Simplify _TIF_SYSCALL_EMU handling
arm64: rename dump_instr as dump_kernel_instr
arm64/mm: Drop [PTE|PMD]_TYPE_FAULT
arm64: Implement panic_smp_self_stop()
arm64: Improve parking of stopped CPUs
arm64: Expose FRINT capabilities to userspace
arm64: Expose ARMv8.5 CondM capability to userspace
arm64: defconfig: enable CONFIG_RANDOMIZE_BASE
arm64: ARM64_MODULES_PLTS must depend on MODULES
arm64: bpf: do not allocate executable memory
arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages
arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP
arm64: module: create module allocations without exec permissions
arm64: Allow user selection of ARM64_MODULE_PLTS
acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
arm64: Allow selecting Pseudo-NMI again
...
* acpica:
ACPICA: Update version to 20190703
ACPICA: Update table load object initialization
ACPICA: Update for object initialization sequence
ACPICA: remove legacy module-level code due to deprecation
ACPICA: Namespace: simplify creation of the initial/default namespace
ACPICA: Clear status of GPEs on first direct enable
* acpi-tables:
ACPI: configfs: Resolve objects on host-directed table loads
ACPI: tables: Allow BGRT to be overridden
* acpi-osl:
ACPI: OSL: Make a W=1 kernel-doc warning go away
* acpi-misc:
ACPI: Make AC and battery drivers available on !X86
* acpi-tools:
ACPI: tools: Exclude tools/* from .gitignore patterns
* pm-sleep:
PM: sleep: Drop dev_pm_skip_next_resume_phases()
ACPI: PM: Drop unused function and function header
ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS
ACPI: PM: Simplify and fix PM domain hibernation callbacks
PCI: PM: Simplify bus-level hibernation callbacks
PM: ACPI/PCI: Resume all devices during hibernation
kernel: power: swap: use kzalloc() instead of kmalloc() followed by memset()
PM: sleep: Update struct wakeup_source documentation
drivers: base: power: remove wakeup_sources_stats_dentry variable
PM: suspend: Rename pm_suspend_via_s2idle()
PM: sleep: Show how long dpm_suspend_start() and dpm_suspend_end() take
PM: hibernate: powerpc: Expose pfn_is_nosave() prototype
* acpi-pm:
ACPI: PM: Make acpi_sleep_state_supported() non-static
ACPI: PM: Allow transitions to D0 to occur in special cases
ACPI: PM: Avoid evaluating _PS3 on transitions from D3hot to D3cold
ACPI / sleep: Switch to use acpi_dev_get_first_match_dev()
ACPI / LPIT: Correct LPIT end address for lpit_process()
* pm-pci:
ACPI: PM: Unexport acpi_device_get_power()
PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete()
PCI / ACPI: Add _PR0 dependent devices
ACPI / PM: Introduce concept of a _PR0 dependent device
PCI / ACPI: Use cached ACPI device state to get PCI device power state
PCI: Do not poll for PME if the device is in D3cold
PCI: Add missing link delays required by the PCIe spec
PCI: PM: Replace pci_dev_keep_suspended() with two functions
PCI: PM: Avoid resuming devices in D3hot during system suspend
With some upcoming patches to save/restore the Hyper-V drivers related
states, a Linux VM running on Hyper-V will be able to hibernate. When
a Linux VM hibernates, unluckily we must disable the memory hot-add/remove
and balloon up/down capabilities in the hv_balloon driver
(drivers/hv/hv_balloon.c), because these can not really work according to
the design of the related back-end driver on the host.
By default, Hyper-V does not enable the virtual ACPI S4 state for a VM;
on recent Hyper-V hosts, the administrator is able to enable the virtual
ACPI S4 state for a VM, so we hope to use the presence of the virtual ACPI
S4 state as a hint for hv_balloon to disable the aforementioned
capabilities. In this way, hibernation will work more reliably, from the
user's perspective.
By marking acpi_sleep_state_supported() non-static, we'll be able to
implement a hv_is_hibernation_supported() API in the always-built-in
module arch/x86/hyperv/hv_init.c, and the API will be called by hv_balloon.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds functionality to perform flush from guest
to host over VIRTIO. We are registering a callback based
on 'nd_region' type. virtio_pmem driver requires this special
flush function. For rest of the region types we are registering
existing flush function. Report error returned by host fsync
failure to userspace.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Function __ghes_check_estatus() is always called after
__ghes_peek_estatus(), but it is already called in __ghes_peek_estatus().
So we should remove some needless __ghes_check_estatus() calls.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Using acpi_device_get_power() outside of ACPI device initialization
and ACPI sysfs is problematic due to the way in which power resources
are handled by it, so unexport it and add a paragraph explaining the
pitfalls to its kerneldoc comment.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
ACPICA commit c7ef9f3526765bed8930825dda1eed1a274b9668
Use the common internal "initialize objects" interface
Affects:
Load()
load_table()
acpi_load_table
Link: https://github.com/acpica/acpica/commit/c7ef9f35
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 106c72a97f5ca972f29956e5e9a0429b8c4a2723
1) Do not allow the objects to be initialized twice
2) Only package objects require a deferred initialization
3) Cleanup initialization output
Link: https://github.com/acpica/acpica/commit/106c72a9
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 1ca34b1a7b960ef321eae5dcddfff77707c88aef
There have been several places that have been calling functions
regarding module level code blocks. This change removes all old
vestiges in the codebase. This is dead code.
Link: https://github.com/acpica/acpica/commit/1ca34b1a
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 76658f55d8cc498a763bdb92f8e0d934822a129c
For the objects that are created by default (_GPE, _SB_, etc)
there is no need to use the heavyweight ns_lookup function.
Instead, simply create each object and link it in as the namespace
is built.
Link: https://github.com/acpica/acpica/commit/76658f55
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is no need to remove address space handler twice,
because removal is idempotent.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The pointer clk is being initialized with a value that is never
read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In general, it is not correct to call pm_generic_suspend(),
pm_generic_suspend_late() and pm_generic_suspend_noirq() during the
hibernation's "poweroff" transition, because device drivers may
provide special callbacks to be invoked then and the wrappers in
question cause system suspend callbacks to be run. Unfortunately,
that happens in the ACPI PM domain and ACPI LPSS.
To address this potential issue, introduce "poweroff" callbacks
for the ACPI PM and LPSS that will use pm_generic_poweroff(),
pm_generic_poweroff_late() and pm_generic_poweroff_noirq() as
appropriate.
Fixes: 05087360fd (ACPI / PM: Take SMART_SUSPEND driver flag into account)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
First, after a previous change causing all runtime-suspended devices
in the ACPI PM domain (and ACPI LPSS devices) to be resumed before
creating a snapshot image of memory during hibernation, it is not
necessary to worry about the case in which them might be left in
runtime-suspend any more, so get rid of the code related to that from
ACPI PM domain and ACPI LPSS hibernation callbacks.
Second, it is not correct to use pm_generic_resume_early() and
acpi_subsys_resume_noirq() in hibernation "restore" callbacks (which
currently happens in the ACPI PM domain and ACPI LPSS), so introduce
proper _restore_late and _restore_noirq callbacks for the ACPI PM
domain and ACPI LPSS.
Fixes: 05087360fd (ACPI / PM: Take SMART_SUSPEND driver flag into account)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Both the PCI bus type and the ACPI PM domain avoid resuming
runtime-suspended devices with DPM_FLAG_SMART_SUSPEND set during
hibernation (before creating the snapshot image of system memory),
but that turns out to be a mistake. It leads to functional issues
and adds complexity that's hard to justify.
For this reason, resume all runtime-suspended PCI devices and all
devices in the ACPI PM domains before creating a snapshot image of
system memory during hibernation.
Fixes: 05087360fd (ACPI / PM: Take SMART_SUSPEND driver flag into account)
Fixes: c4b65157ae (PCI / PM: Take SMART_SUSPEND driver flag into account)
Link: https://lore.kernel.org/linux-acpi/917d4399-2e22-67b1-9d54-808561f9083f@uwyo.edu/T/#maf065fe6e4974f2a9d79f332ab99dfaba635f64c
Reported-by: Robert R. Howell <RHowell@uwyo.edu>
Tested-by: Robert R. Howell <RHowell@uwyo.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
ACPI 6.3 adds a flag to indicate that child nodes are all
identical cores. This is useful to authoritatively determine
if a set of (possibly offline) cores are identical or not.
Since the flag doesn't give us a unique id we can generate
one and use it to create bitmaps of sibling nodes, or simply
in a loop to determine if a subset of cores are identical.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The ACPI specification implies that the IDENTICAL flag should be
set on all non leaf nodes where the children are identical.
This means that we need to be searching for the last node with
the identical flag set rather than the first one.
Since this flag is also dependent on the table revision, we
need to add a bit of extra code to verify the table revision,
and the next node's state in the traversal. Since we want to
avoid function pointers here, lets just special case
the IDENTICAL flag.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
If there are shared power resources between otherwise unrelated devices
turning them on causes the other devices sharing them to be powered up
as well. In case of PCI devices go into D0uninitialized state meaning
that if they were configured to trigger wake that configuration is lost
at this point.
For this reason introduce a concept of "_PR0 dependent device" that can
be added to any ACPI device that has power resources. The dependent
device will be included in a list of dependent devices for all power
resources returned by the ACPI device's _PR0 (assuming it has one).
Whenever a power resource having dependent devices is turned physically
on (its _ON method is called) we runtime resume all of them to allow
their driver or in case of PCI the PCI core to re-initialize the device
and its wake configuration.
This adds two functions that can be used to add and remove these
dependent devices. Note the dependent device does not necessary need
share power resources so this functionality can be used to add "software
dependencies" as well if needed.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If a device with ACPI PM is left in D0 during a system-wide
transition to the S3 (suspend-to-RAM) or S4 (hibernation) sleep
state, the actual state of the device need not be D0 during resume
from it, although its power.state value will still reflect D0 (that
is, the power state from before the system-wide transition).
In that case, the acpi_device_set_power() call made to ensure that
the power state of the device will be D0 going forward has no effect,
because the new state (D0) is equal to the one reflected by the
device's power.state value. That does not affect power resources,
which are taken care of by acpi_resume_power_resources() called from
acpi_pm_finish() during resume from system-wide sleep states, but it
still may be necessary to invoke _PS0 for the device on top of that
in order to finalize its transition to D0.
For this reason, modify acpi_device_set_power() to allow transitions
to D0 to occur even if D0 is the current power state of the device
according to its power.state value.
That will not affect power resources, which are assumed to be in
the right configuration already (as reflected by the current values
of their reference counters), but it may cause _PS0 to be evaluated
for the device. However, evaluating _PS0 for a device already in D0
may lead to confusion in general, so invoke _PSC (if present) to
check the device's current power state upfront and only evaluate
_PS0 for it if _PSC has returned a power state different from D0.
[If _PSC is not present or the evaluation of it fails, the power
state of the device is assumed to be D0 at this point.]
Fixes: 20dacb71ad (ACPI / PM: Rework device power management to follow ACPI 6)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
If the power state of a device with ACPI PM is changed from D3hot to
D3cold, it merely is a matter of dropping references to additional
power resources (specifically, those in the list returned by _PR3),
and the _PS3 method should not be invoked for the device then (as
it has already been evaluated during the previous transition to
D3hot).
Fixes: 20dacb71ad (ACPI / PM: Rework device power management to follow ACPI 6)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There is an arbitrary difference between the prototypes of
bus_find_device() and class_find_device() preventing their callers
from passing the same pair of data and match() arguments to both of
them, which is the const qualifier used in the prototype of
class_find_device(). If that qualifier is also used in the
bus_find_device() prototype, it will be possible to pass the same
match() callback function to both bus_find_device() and
class_find_device(), which will allow some optimizations to be made in
order to avoid code duplication going forward. Also with that, constify
the "data" parameter as it is passed as a const to the match function.
For this reason, change the prototype of bus_find_device() to match
the prototype of class_find_device() and adjust its callers to use the
const qualifier in accordance with the new prototype of it.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Kershner <david.kershner@unisys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: rafael@kernel.org
Acked-by: Corey Minyard <minyard@acm.org>
Acked-by: David Kershner <david.kershner@unisys.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The prototype of bus_find_device() will be unified with that of
class_find_device() subsequently, but for this purpose the callback
functions passed to it need to take (const void *) as the second
argument. Consequently, they cannot modify the memory pointed to by
that argument which currently is not the case for acpi_dev_match_cb().
However, acpi_dev_match_cb() really need not modify the "match" object
passed to it, because acpi_dev_get_first_match_dev() which uses it via
bus_find_device() can easily convert the result of bus_find_device()
into the pointer to return.
For this reason, update acpi_dev_match_cb() to avoid the redundant
memory updates.
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhaoxin CPUs have NONSTOP TSC feature, so enable the ACPI
driver support for it.
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "hpa@zytor.com" <hpa@zytor.com>
Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Cc: "rjw@rjwysocki.net" <rjw@rjwysocki.net>
Cc: "lenb@kernel.org" <lenb@kernel.org>
Cc: David Wang <DavidWang@zhaoxin.com>
Cc: "Cooper Yan(BJ-RD)" <CooperYan@zhaoxin.com>
Cc: "Qiyuan Wang(BJ-RD)" <QiyuanWang@zhaoxin.com>
Cc: "Herry Yang(BJ-RD)" <HerryYang@zhaoxin.com>
Link: https://lkml.kernel.org/r/d1cfd937dabc44518d42038b55522c53@zhaoxin.com
ACPI battery and AC devices can be found in arm64 laptops as well,
so drop the Kconfig dependency on X86 for their drivers.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Evaluate _DSM Function #5, the "PCI Boot Configuration" function. If the
result is 0, the OS should preserve any resource assignments made by the
firmware.
Link: https://lore.kernel.org/r/20190615002359.29577-2-benh@kernel.crashing.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
All AMBA devices are handled via ACPI AMBA scan notifier
infrastructure. The platform devices get the ACPI id
added to their driver.
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 3 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081205.739216165@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this work is licensed under the terms of the gnu gpl version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 48 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081204.624030236@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation the gpl this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
version 2 gplv2 for more details you should have received a copy of
the gnu general public license version 2 gplv2 along with this
source code
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 16 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081201.771169395@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI GPEs (other than the EC one) can be enabled in two situations.
First, the GPEs with existing _Lxx and _Exx methods are enabled
implicitly by ACPICA during system initialization. Second, the
GPEs without these methods (like GPEs listed by _PRW objects for
wakeup devices) need to be enabled directly by the code that is
going to use them (e.g. ACPI power management or device drivers).
In the former case, if the status of a given GPE is set to start
with, its handler method (either _Lxx or _Exx) needs to be invoked
to take care of the events (possibly) signaled before the GPE was
enabled. In the latter case, however, the first caller of
acpi_enable_gpe() for a given GPE should not be expected to care
about any events that might be signaled through it earlier. In
that case, it is better to clear the status of the GPE before
enabling it, to prevent stale events from triggering unwanted
actions (like spurious system resume, for example).
For this reason, modify acpi_ev_add_gpe_reference() to take an
additional boolean argument indicating whether or not the GPE
status needs to be cleared when its reference counter changes from
zero to one and make acpi_enable_gpe() pass TRUE to it through
that new argument.
Fixes: 18996f2db9 ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume")
Reported-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@google.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlz8fAYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1asH/3ySguxqtqL1MCBa
4/SZ37PHeWKMerfX6ZyJdgEqK3B+PWlmuLiOMNK5h2bPLzeQQQAmHU/mfKmpXqgB
dHwUbG9yNnyUtTfsfRqAnCA6vpuw9Yb1oIzTCVQrgJLSWD0j7scBBvmzYqguOkto
ThwigLUq3AILr8EfR4rh+GM+5Dn9OTEFAxwil9fPHQo7QoczwZxpURhScT6Co9TB
DqLA3fvXbBvLs/CZy/S5vKM9hKzC+p39ApFTURvFPrelUVnythAM0dPDJg3pIn5u
g+/+gDxDFa+7ANxvxO2ng1sJPDqJMeY/xmjJYlYyLpA33B7zLNk2vDHhAP06VTtr
XCMhQ9s=
=cb80
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc4' into mauro
We need to pick up post-rc1 changes to various document files so they don't
get lost in Mauro's massive RST conversion push.
If an ACPI SSDT overlay is loaded after built-in tables
have been loaded e.g. via configfs or efivar_ssdt_load()
it is necessary to rewalk the namespace to resolve
references. Without this, relative and absolute paths
like ^PCI0.SBUS or \_SB.PCI0.SBUS are not resolved
correctly.
Make configfs loads use the same method as efivar_ssdt_load().
Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Thinkpad T Series expose a malformed BGRT table with Version field set
to 0. This fact prevents bootsplashes (as Plymouth) to correctly show
the manufacturer logo. This patch permits to override malformed BGRT
table with a correct one defined by the user.
Signed-off-by: Andrea Oliveri <oliveriandrea@gmail.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Switch the acpi_pm_finish() to use acpi_dev_get_first_match_dev() instead of
custom approach.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mostly due to x86 and acpi conversion, several documentation
links are still pointing to the old file. Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com>
Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this file is licensed under gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 22 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.129548190@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this file is released under the gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 68 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 135 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081036.435762997@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of version 2 of the gnu general public license as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 64 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 263 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 294 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It appears that kernel-doc does not understand the return type *__ref,
drivers/acpi/osl.c:306: warning: cannot understand function prototype:
'void __iomem *__ref acpi_os_map_iomem(acpi_physical_address phys,
acpi_size size)
Signed-off-by: Qian Cai <cai@lca.pw>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is no reason why we should limit the use of
fwnode_get_named_child_node() to data nodes only.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Modify the PCI bus type's PM code to avoid putting devices left
by their drivers in D0 on purpose during suspend to idle into
low-power states as doing that may confuse the system resume
callbacks of the drivers in question (Rafael Wysocki).
- Avoid checking ACPI wakeup configuration during system-wide
suspend for suspended devices that do not use ACPI-based wakeup
to allow them to stay in suspend more often (Rafael Wysocki).
- The last phase of hibernation is analogous to system-wide suspend
also because on platforms with ACPI it passes control to the
platform firmware to complete the transision, so make it indicate
that by calling pm_set_suspend_via_firmware() to allow the drivers
that care about this to do the right thing (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=Ddo8
-----END PGP SIGNATURE-----
Merge tag 'pm-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in the system-wide suspend and hibernation area
related to PCI device PM handling by suspend-to-idle, device wakeup
optimizations and arbitrary differences between suspend and
hiberantion.
Specifics:
- Modify the PCI bus type's PM code to avoid putting devices left by
their drivers in D0 on purpose during suspend to idle into
low-power states as doing that may confuse the system resume
callbacks of the drivers in question (Rafael Wysocki).
- Avoid checking ACPI wakeup configuration during system-wide suspend
for suspended devices that do not use ACPI-based wakeup to allow
them to stay in suspend more often (Rafael Wysocki).
- The last phase of hibernation is analogous to system-wide suspend
also because on platforms with ACPI it passes control to the
platform firmware to complete the transision, so make it indicate
that by calling pm_set_suspend_via_firmware() to allow the drivers
that care about this to do the right thing (Rafael Wysocki)"
* tag 'pm-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI: PM: Avoid possible suspend-to-idle issue
ACPI: PM: Call pm_set_suspend_via_firmware() during hibernation
ACPI/PCI: PM: Add missing wakeup.flags.valid checks
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct the LPIT end address which is passed into lpit_process()
and the end address limit test in lpit_process().
The LPI state descriptor subtables follow the fixed sized
acpi_lpit_header up to the end of the LPIT. The last LPI state
descriptor can end at exactly the end of the LPIT.
Note that this is a fix to a latent problem. Although incorrect,
the unpatched version works because the passed in end address
is just slightly beyond the actual end of the LPIT and the size
of the ACPI LPIT header is smaller than the size of the only
currently defined LPI state descriptor, acpi_lpit_native.
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI permits arbitrary producer->consumer interrupt links to be
described in AML, which means a topology such as the following
is perfectly legal:
Device (EXIU) {
Name (_HID, "SCX0008")
Name (_UID, Zero)
Name (_CRS, ResourceTemplate () {
...
})
}
Device (GPIO) {
Name (_HID, "SCX0007")
Name (_UID, Zero)
Name (_CRS, ResourceTemplate () {
Memory32Fixed (ReadWrite, SYNQUACER_GPIO_BASE, SYNQUACER_GPIO_SIZE)
Interrupt (ResourceConsumer, Edge, ActiveHigh, ExclusiveAndWake, 0, "\\_SB.EXIU") {
7,
}
})
...
}
The EXIU in this example is the external interrupt unit as can be found
on Socionext SynQuacer based platforms, which converts a block of 32 SPIs
from arbitrary polarity/trigger into level-high, with a separate set
of config/mask/unmask/clear controls.
The existing DT based driver in drivers/irqchip/irq-sni-exiu.c models
this as a hierarchical domain stacked on top of the GIC's irqdomain.
Since the GIC is modeled as a DT node as well, obtaining a reference
to this irqdomain is easily done by going through the parent link.
On ACPI systems, however, the GIC is not modeled as an object in the
namespace, and so device objects cannot refer to it directly. So in
order to obtain the irqdomain reference when driving the EXIU in ACPI
mode, we need a helper that implicitly grabs the default domain as the
parent of the hierarchy for interrupts allocated out of the global GSI
pool.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
