Commit Graph

3687 Commits

Author SHA1 Message Date
Sean Christopherson
0a3f29b5a7 KVM: selftests: explicitly disable PIE for tests
KVM selftests embed the guest "image" as a function in the test itself
and extract the guest code at runtime by manually parsing the elf
headers.  The parsing is very simple and doesn't supporting fancy things
like position independent executables.  Recent versions of gcc enable
pie by default, which results in triple fault shutdowns in the guest due
to the virtual address in the headers not matching up with the virtual
address retrieved from the function pointer.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28 17:29:07 +01:00
Sean Christopherson
8df98ae0ab KVM: selftests: assert on exit reason in CR4/cpuid sync test
...so that the test doesn't end up in an infinite loop if it fails for
whatever reason, e.g. SHUTDOWN due to gcc inserting stack canary code
into ucall() and attempting to derefence a null segment.

Fixes: ca35906688 ("kvm: selftests: add cr4_cpuid_sync_test")
Cc: Wei Huang <wei@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28 17:29:05 +01:00
David S. Miller
356d71e00d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-03-27 17:37:58 -07:00
Linus Torvalds
1a9df9e29c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "Fixes here and there, a couple new device IDs, as usual:

   1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.

   2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.

   3) Fix documentation for some eBPF helpers, from Quentin Monnet.

   4) Some UAPI bpf header sync with tools, also from Quentin Monnet.

   5) Set descriptor ownership bit at the right time for jumbo frames in
      stmmac driver, from Aaro Koskinen.

   6) Set IFF_UP properly in tun driver, from Eric Dumazet.

   7) Fix load/store doubleword instruction generation in powerpc eBPF
      JIT, from Naveen N. Rao.

   8) nla_nest_start() return value checks all over, from Kangjie Lu.

   9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
      merge window. From Marcelo Ricardo Leitner and Xin Long.

  10) Fix memory corruption with large MTUs in stmmac, from Aaro
      Koskinen.

  11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
      Dumazet.

  12) Fix topology subscription cancellation in tipc, from Erik Hugne.

  13) Memory leak in genetlink error path, from Yue Haibing.

  14) Valid control actions properly in packet scheduler, from Davide
      Caratti.

  15) Even if we get EEXIST, we still need to rehash if a shrink was
      delayed. From Herbert Xu.

  16) Fix interrupt mask handling in interrupt handler of r8169, from
      Heiner Kallweit.

  17) Fix leak in ehea driver, from Wen Yang"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
  dpaa2-eth: fix race condition with bql frame accounting
  chelsio: use BUG() instead of BUG_ON(1)
  net: devlink: skip info_get op call if it is not defined in dumpit
  net: phy: bcm54xx: Encode link speed and activity into LEDs
  tipc: change to check tipc_own_id to return in tipc_net_stop
  net: usb: aqc111: Extend HWID table by QNAP device
  net: sched: Kconfig: update reference link for PIE
  net: dsa: qca8k: extend slave-bus implementations
  net: dsa: qca8k: remove leftover phy accessors
  dt-bindings: net: dsa: qca8k: support internal mdio-bus
  dt-bindings: net: dsa: qca8k: fix example
  net: phy: don't clear BMCR in genphy_soft_reset
  bpf, libbpf: clarify bump in libbpf version info
  bpf, libbpf: fix version info and add it to shared object
  rxrpc: avoid clang -Wuninitialized warning
  tipc: tipc clang warning
  net: sched: fix cleanup NULL pointer exception in act_mirr
  r8169: fix cable re-plugging issue
  net: ethernet: ti: fix possible object reference leak
  net: ibm: fix possible object reference leak
  ...
2019-03-27 12:22:57 -07:00
Andrii Nakryiko
eb76899ce7 selftests/bpf: add btf_dedup test for VOID equivalence check
This patch adds specific test exposing bug in btf_dedup_is_equiv() when
comparing candidate VOID type to a non-VOID canonical type. It's
important for canonical type to be anonymous, otherwise name equality
check will do the right thing and will exit early.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-27 08:01:25 -07:00
Paul Chaignon
cabacfbbe5 selftests/bpf: test case for invalid call stack in dead code
This patch adds a test case with an excessive number of call stack frames
in dead code.

Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Tested-by: Xiao Han <xiao.han@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-26 13:02:16 -07:00
Stanislav Fomichev
b4b6aa8343 selftests: bpf: don't depend on hardcoded perf sample_freq
When running stacktrace_build_id_nmi, try to query
kernel.perf_event_max_sample_rate sysctl and use it as a sample_freq.
If there was an error reading sysctl, fallback to 5000.

kernel.perf_event_max_sample_rate sysctl can drift and/or can be
adjusted by the perf tool, so assuming a fixed number might be
problematic on a long running machine.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-26 12:47:41 -07:00
Alan Maguire
0c4ea7f87a bpf: test_tc_tunnel.sh needs reverse path filtering disabled
test_tc_tunnel.sh sets up a pair of namespaces connected by a
veth pair to verify encap/decap using bpf_skb_adjust_room.  In
testing this, it uses tunnel links as the peer of the bpf-based
encap/decap.  However because the same IP header is used for inner
and outer IP, when packets arrive at the tunnel interface they will
be dropped by reverse path filtering as those packets are expected
on the veth interface (where the destination IP of the decapped
packet is configured).

To avoid this, ensure reverse path filtering is disabled for the
namespace using tunneling.

Fixes: 98cdabcd07 ("selftests/bpf: bpf tunnel encap test")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-25 15:01:54 +01:00
David S. Miller
27602e2c44 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:

====================
pull-request: bpf 2019-03-24

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) libbpf verision fix up from Daniel.

2) fix liveness propagation from Jakub.

3) fix verbose print of refcounted regs from Martin.

4) fix for large map allocations from Martynas.

5) fix use after free in sanitize_ptr_alu from Xu.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-24 23:45:35 -04:00
Peter Oskolkov
7df5e3db8f selftests: bpf: tc-bpf flow shaping with EDT
Add a small test that shows how to shape a TCP flow in tc-bpf
with EDT and ECN.

Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-22 18:16:44 -07:00
Willem de Bruijn
75a1a9fa2e selftests/bpf: convert bpf tunnel test to encap modes
Make the tests correctly annotate skbs with tunnel metadata.

This makes the gso tests succeed. Enable them.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-22 13:52:45 -07:00
Willem de Bruijn
94f16813e1 selftests/bpf: convert bpf tunnel test to BPF_F_ADJ_ROOM_FIXED_GSO
Lower route MTU to ensure packets fit in device MTU after encap, then
skip the gso_size changes.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-22 13:52:45 -07:00
Willem de Bruijn
005edd1656 selftests/bpf: convert bpf tunnel test to BPF_ADJ_ROOM_MAC
Avoid moving the network layer header when prefixing tunnel headers.

This avoids an explicit call to bpf_skb_store_bytes and an implicit
move of the network header bytes in bpf_skb_adjust_room.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-22 13:52:45 -07:00
Willem de Bruijn
8142958954 selftests/bpf: extend bpf tunnel test with tso
Segmentation offload takes a longer path. Verify that the feature
works with large packets.

The test succeeds if not setting dodgy in bpf_skb_adjust_room, as veth
TSO is permissive.

If not setting SKB_GSO_DODGY, this enables tunneled TSO offload on
supporting NICs.

The feature sets SKB_GSO_DODGY because the caller is untrusted. As a
result the packets traverse through the gso stack at least up to TCP.
And fail the gso_type validation, such as the skb->encapsulation check
in gre_gso_segment and the gso_type checks introduced in commit
418e897e07 ("gso: validate gso_type on ipip style tunnel").

This will be addressed in a follow-on feature patch. In the meantime,
disable the new gso tests.

Changes v1->v2:
  - not all netcat versions support flag '-q', use timeout instead

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-22 13:52:44 -07:00
Willem de Bruijn
7255fade7b selftests/bpf: extend bpf tunnel test with gre
GRE is a commonly used protocol. Add GRE cases for both IPv4 and IPv6.

It also inserts different sized headers, which can expose some
unexpected edge cases.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-22 13:52:44 -07:00
Willem de Bruijn
ef81bd0549 selftests/bpf: expand bpf tunnel test to ipv6
The test only uses ipv4 so far, expand to ipv6.
This is mostly a boilerplate near copy of the ipv4 path.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-22 13:52:44 -07:00
Willem de Bruijn
ccd34cd357 selftests/bpf: expand bpf tunnel test with decap
The bpf tunnel test encapsulates using bpf, then decapsulates using
a standard tunnel device to verify correctness.

Once encap is verified, also test decap, by replacing the tunnel
device on decap with another bpf program.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-22 13:52:44 -07:00
Willem de Bruijn
98cdabcd07 selftests/bpf: bpf tunnel encap test
Validate basic tunnel encapsulation using ipip.

Set up two namespaces connected by veth. Connect a client and server.
Do this with and without bpf encap.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-22 13:52:44 -07:00
Jakub Kicinski
83d163124c bpf: verifier: propagate liveness on all frames
Commit 7640ead939 ("bpf: verifier: make sure callees don't prune
with caller differences") connected up parentage chains of all
frames of the stack.  It didn't, however, ensure propagate_liveness()
propagates all liveness information along those chains.

This means pruning happening in the callee may generate explored
states with incomplete liveness for the chains in lower frames
of the stack.

The included selftest is similar to the prior one from commit
7640ead939 ("bpf: verifier: make sure callees don't prune with
caller differences"), where callee would prune regardless of the
difference in r8 state.

Now we also initialize r9 to 0 or 1 based on a result from get_random().
r9 is never read so the walk with r9 = 0 gets pruned (correctly) after
the walk with r9 = 1 completes.

The selftest is so arranged that the pruning will happen in the
callee.  Since callee does not propagate read marks of r8, the
explored state at the pruning point prior to the callee will
now ignore r8.

Propagate liveness on all frames of the stack when pruning.

Fixes: f4d7e40a5b ("bpf: introduce function calls (verification)")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-21 19:57:02 -07:00
Ivan Vecera
f682752627 selftests: bpf: modify urandom_read and link it non-statically
After some experiences I found that urandom_read does not need to be
linked statically. When the 'read' syscall call is moved to separate
non-inlined function then bpf_get_stackid() is able to find
the executable in stack trace and extract its build_id from it.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-21 19:37:30 -07:00
Lorenz Bauer
bafc0ba826 selftests/bpf: add tests for bpf_tcp_check_syncookie and bpf_skc_lookup_tcp
Add tests which verify that the new helpers work for both IPv4 and
IPv6, by forcing SYN cookies to always on. Use a new network namespace
to avoid clobbering the global SYN cookie settings.

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-21 18:59:11 -07:00
Lorenz Bauer
5792d52df1 selftests/bpf: test references to sock_common
Make sure that returning a struct sock_common * reference invokes
the reference tracking machinery in the verifier.

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-21 18:59:11 -07:00
Lorenz Bauer
dbaf2877e9 selftests/bpf: allow specifying helper for BPF_SK_LOOKUP
Make the BPF_SK_LOOKUP macro take a helper function, to ease
writing tests for new helpers.

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-21 18:59:11 -07:00
Davide Caratti
7e0c8892df net/sched: act_vlan: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action vlan pop pass index 90
 # tc actions replace action vlan \
 > pop goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action vlan

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: vlan  pop goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 800000007974f067 P4D 800000007974f067 PUD 79638067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff982dfdb83be0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff982dfc55db00 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff982df97099c0 RDI: ffff982dfc55db00
 RBP: ffff982dfdb83c80 R08: ffff982df983fec8 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff982df5aacd00
 R13: ffff982df5aacd08 R14: 0000000000000001 R15: ffff982df97099c0
 FS:  0000000000000000(0000) GS:ffff982dfdb80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 00000000796d0005 CR4: 00000000001606e0
 Call Trace:
  <IRQ>
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip6_finish_output2+0x369/0x590
  ip6_finish_output2+0x369/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.35+0x79/0xc0
  mld_sendpack+0x16f/0x220
  mld_ifc_timer_expire+0x195/0x2c0
  ? igmp6_timer_handler+0x70/0x70
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? enqueue_hrtimer+0x39/0x90
  __do_softirq+0xe3/0x2f5
  irq_exit+0xf0/0x100
  smp_apic_timer_interrupt+0x6c/0x130
  apic_timer_interrupt+0xf/0x20
  </IRQ>
 RIP: 0010:native_safe_halt+0x2/0x10
 Code: 7b ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
 RSP: 0018:ffffa4714038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
 RAX: ffffffff840184f0 RBX: 0000000000000003 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000001e57d3f387
 RBP: 0000000000000003 R08: 001125d9ca39e1eb R09: 0000000000000000
 R10: 000000000000027d R11: 000000000009f400 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x1/0x1
  default_idle+0x1c/0x140
  do_idle+0x1c4/0x280
  cpu_startup_entry+0x19/0x20
  start_secondary+0x1a7/0x200
  secondary_startup_64+0xa4/0xb0
 Modules linked in: act_vlan veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic mbcache crct10dif_pclmul jbd2 snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer virtio_balloon snd pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt virtio_net fb_sys_fops virtio_blk ttm net_failover virtio_console failover ata_piix drm libata crc32c_intel virtio_pci serio_raw virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_vlan_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:42 -07:00
Davide Caratti
e5fdabacbf net/sched: act_tunnel_key: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.2 dst_port 3128 \
 > nocsum id 1 pass index 90
 # tc actions replace action tunnel_key \
 > set src_ip 10.10.10.1 dst_ip 20.20.2 dst_port 3128 nocsum id 1 \
 > goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action tunnel_key

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: tunnel_key  set
         src_ip 10.10.10.1
         dst_ip 20.20.2.0
         key_id 1
         dst_port 3128
         nocsum goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 800000002aba4067 P4D 800000002aba4067 PUD 795f9067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff9346bdb83be0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff9346bb795c00 RCX: 0000000000000002
 RDX: 0000000000000000 RSI: ffff93466c881700 RDI: 0000000000000246
 RBP: ffff9346bdb83c80 R08: ffff9346b3e1e0c8 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9346b978f000
 R13: ffff9346b978f008 R14: 0000000000000001 R15: ffff93466dceeb40
 FS:  0000000000000000(0000) GS:ffff9346bdb80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000007a6c2002 CR4: 00000000001606e0
 Call Trace:
  <IRQ>
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip6_finish_output2+0x369/0x590
  ip6_finish_output2+0x369/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.35+0x79/0xc0
  mld_sendpack+0x16f/0x220
  mld_ifc_timer_expire+0x195/0x2c0
  ? igmp6_timer_handler+0x70/0x70
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? tick_sched_timer+0x37/0x70
  __do_softirq+0xe3/0x2f5
  irq_exit+0xf0/0x100
  smp_apic_timer_interrupt+0x6c/0x130
  apic_timer_interrupt+0xf/0x20
  </IRQ>
 RIP: 0010:native_safe_halt+0x2/0x10
 Code: 55 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
 RSP: 0018:ffffa48a8038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
 RAX: ffffffffaa8184f0 RBX: 0000000000000003 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000003
 RBP: 0000000000000003 R08: 0011251c6fcfac49 R09: ffff9346b995be00
 R10: ffffa48a805e7ce8 R11: 00000000024c38dd R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x1/0x1
  default_idle+0x1c/0x140
  do_idle+0x1c4/0x280
  cpu_startup_entry+0x19/0x20
  start_secondary+0x1a7/0x200
  secondary_startup_64+0xa4/0xb0
 Modules linked in: act_tunnel_key veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel mbcache snd_hda_intel jbd2 snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer snd pcspkr virtio_balloon soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops ttm net_failover virtio_console virtio_blk failover drm serio_raw crc32c_intel ata_piix virtio_pci floppy virtio_ring libata virtio dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_tunnel_key_init() proved to fix
the above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:42 -07:00
Davide Caratti
7c3d825d12 net/sched: act_skbmod: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action skbmod set smac 00:c1:a0:c1:a0:00 pass index 90
 # tc actions replace action skbmod \
 > set smac 00:c1:a0:c1:a0:00 goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action skbmod

had the following output:

 src MAC address <00:c1:a0:c1:a0:00>
 src MAC address <00:c1:a0:c1:a0:00>
 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: skbmod goto chain 42 set smac 00:c1:a0:c1:a0:00
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 800000002d5c7067 P4D 800000002d5c7067 PUD 77e16067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff8987ffd83be0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff8987aeb68800 RCX: ffff8987fa263640
 RDX: 0000000000000000 RSI: ffff8987f51c8802 RDI: 00000000000000a0
 RBP: ffff8987ffd83c80 R08: ffff8987f939bac8 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8987f5c77d00
 R13: ffff8987f5c77d08 R14: 0000000000000001 R15: ffff8987f0c29f00
 FS:  0000000000000000(0000) GS:ffff8987ffd80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000007832c004 CR4: 00000000001606e0
 Call Trace:
  <IRQ>
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip6_finish_output2+0x369/0x590
  ip6_finish_output2+0x369/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.35+0x79/0xc0
  mld_sendpack+0x16f/0x220
  mld_ifc_timer_expire+0x195/0x2c0
  ? igmp6_timer_handler+0x70/0x70
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? tick_sched_timer+0x37/0x70
  __do_softirq+0xe3/0x2f5
  irq_exit+0xf0/0x100
  smp_apic_timer_interrupt+0x6c/0x130
  apic_timer_interrupt+0xf/0x20
  </IRQ>
 RIP: 0010:native_safe_halt+0x2/0x10
 Code: 56 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
 RSP: 0018:ffffa2a1c038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
 RAX: ffffffffa94184f0 RBX: 0000000000000003 RCX: 0000000000000001
 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000003
 RBP: 0000000000000003 R08: 001123cfc2ba71ac R09: 0000000000000000
 R10: 0000000000000000 R11: 00000000000f4240 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x1/0x1
  default_idle+0x1c/0x140
  do_idle+0x1c4/0x280
  cpu_startup_entry+0x19/0x20
  start_secondary+0x1a7/0x200
  secondary_startup_64+0xa4/0xb0
 Modules linked in: act_skbmod veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device aesni_intel crypto_simd cryptd glue_helper snd_pcm joydev pcspkr virtio_balloon snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops net_failover virtio_console ttm virtio_blk failover drm crc32c_intel serio_raw ata_piix virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_skbmod_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:42 -07:00
Davide Caratti
ec7727bb24 net/sched: act_skbedit: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action skbedit ptype host pass index 90
 # tc actions replace action skbedit \
 > ptype host goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action skbedit

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: skbedit  ptype host goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 3 PID: 3467 Comm: kworker/3:3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffb50a81e1fad0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff9aa47ba4ea00 RCX: 0000000000000001
 RDX: 0000000000000000 RSI: ffff9aa469eeb3c0 RDI: ffff9aa47ba4ea00
 RBP: ffffb50a81e1fb70 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: ffff9aa47bce0638 R12: ffff9aa4793b0c00
 R13: ffff9aa4793b0c08 R14: 0000000000000001 R15: ffff9aa469eeb3c0
 FS:  0000000000000000(0000) GS:ffff9aa474780000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000007360e005 CR4: 00000000001606e0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
 Modules linked in: act_skbedit veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep mbcache snd_hda_core jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev soundcore pcspkr virtio_balloon i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net net_failover drm failover virtio_blk virtio_console ata_piix virtio_pci crc32c_intel serio_raw libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_skbedit_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
4b006b0c13 net/sched: act_simple: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action simple sdata hello pass index 90
 # tc actions replace action simple \
 > sdata world goto chain 42 index 90 cookie c1a0c1a0
 # tc action show action simple

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: Simple <world>
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 800000006a6fb067 P4D 800000006a6fb067 PUD 6aed6067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 2 PID: 3241 Comm: kworker/2:0 Not tainted 5.0.0-rc4.gotochain_crash+ #536
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffbe6781763ad0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff9e59bdb80e00 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff9e59b4716738 RDI: ffff9e59ab12d140
 RBP: ffffbe6781763b70 R08: 0000000000000234 R09: 0000000000aaaaaa
 R10: 0000000000000000 R11: ffff9e59b247cd50 R12: ffff9e59b112f100
 R13: ffff9e59b112f108 R14: 0000000000000001 R15: ffff9e59ab12d0c0
 FS:  0000000000000000(0000) GS:ffff9e59b4700000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000006af92004 CR4: 00000000001606e0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
 Modules linked in: act_simple veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep mbcache snd_hda_core jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net ttm net_failover virtio_console virtio_blk failover drm crc32c_intel serio_raw floppy ata_piix libata virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_simple_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
e8c87c643e net/sched: act_sample: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action sample rate 1024 group 4 pass index 90
 # tc actions replace action sample \
 > rate 1024 group 4 goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action sample

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: sample rate 1/1024 group 4 goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 8000000079966067 P4D 8000000079966067 PUD 7987b067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.0.0-rc4.gotochain_crash+ #536
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffbee60033fad0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff99d7ae6e3b00 RCX: 00000000e555df9b
 RDX: 0000000000000000 RSI: 00000000b0352718 RDI: ffff99d7fda1fcf0
 RBP: ffffbee60033fb70 R08: 0000000070731ab1 R09: 0000000000000400
 R10: 0000000000000000 R11: ffff99d7ac733838 R12: ffff99d7f3c2be00
 R13: ffff99d7f3c2be08 R14: 0000000000000001 R15: ffff99d7f3c2b600
 FS:  0000000000000000(0000) GS:ffff99d7fda00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 00000000797de006 CR4: 00000000001606f0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
 Modules linked in: act_sample psample veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device aesni_intel crypto_simd snd_pcm cryptd glue_helper snd_timer joydev snd pcspkr virtio_balloon i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops net_failover ttm failover virtio_blk virtio_console drm ata_piix serio_raw crc32c_intel libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_sample_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
d6124d6ba6 net/sched: act_police: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action police rate 3mbit burst 250k pass index 90
 # tc actions replace action police \
 > rate 3mbit burst 250k goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action police rate 3mbit burst

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0:  police 0x5a rate 3Mbit burst 250Kb mtu 2Kb  action goto chain 42 overhead 0b
         ref 2 bind 1
         cookie c1a0c1a0

Then, when crash0 starts transmitting more than 3Mbit/s, the following
kernel crash is observed:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 800000007a779067 P4D 800000007a779067 PUD 2ad96067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 3 PID: 5032 Comm: netperf Not tainted 5.0.0-rc4.gotochain_crash+ #533
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffb0e04064fa60 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff93bb3322cce0 RCX: 0000000000000005
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff93bb3322cce0
 RBP: ffffb0e04064fb00 R08: 0000000000000022 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000001 R12: ffff93bb3beed300
 R13: ffff93bb3beed308 R14: 0000000000000001 R15: ffff93bb3b64d000
 FS:  00007f0bc6be5740(0000) GS:ffff93bb3db80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 00000000746a8001 CR4: 00000000001606e0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ipt_do_table+0x31c/0x420 [ip_tables]
  ? ip_finish_output2+0x16f/0x430
  ip_finish_output2+0x16f/0x430
  ? ip_output+0x69/0xe0
  ip_output+0x69/0xe0
  ? ip_forward_options+0x1a0/0x1a0
  __tcp_transmit_skb+0x563/0xa40
  tcp_write_xmit+0x243/0xfa0
  __tcp_push_pending_frames+0x32/0xf0
  tcp_sendmsg_locked+0x404/0xd30
  tcp_sendmsg+0x27/0x40
  sock_sendmsg+0x36/0x40
  __sys_sendto+0x10e/0x140
  ? __sys_connect+0x87/0xf0
  ? syscall_trace_enter+0x1df/0x2e0
  ? __audit_syscall_exit+0x216/0x260
  __x64_sys_sendto+0x24/0x30
  do_syscall_64+0x5b/0x180
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f0bc5ffbafd
 Code: 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 8b 05 ae c4 2c 00 85 c0 75 2d 45 31 c9 45 31 c0 4c 63 d1 48 63 ff b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 63 63 2c 00 f7 d8 64 89 02 48
 RSP: 002b:00007fffef94b7f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 RAX: ffffffffffffffda RBX: 0000000000004000 RCX: 00007f0bc5ffbafd
 RDX: 0000000000004000 RSI: 00000000017e5420 RDI: 0000000000000004
 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000004
 R13: 00000000017e51d0 R14: 0000000000000010 R15: 0000000000000006
 Modules linked in: act_police veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic mbcache crct10dif_pclmul jbd2 crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper snd_timer snd joydev pcspkr virtio_balloon soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_blk virtio_net virtio_console net_failover failover crc32c_intel ata_piix libata serio_raw virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_police_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
6ac86ca352 net/sched: act_pedit: validate the control action inside init()
the following script:

 # tc filter add dev crash0 egress matchall \
 > action pedit ex munge ip ttl set 10 pass index 90
 # tc actions replace action pedit \
 > ex munge ip ttl set 10 goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action pedit

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0:  pedit action goto chain 42 keys 1
          index 90 ref 2 bind 1
          key #0  at ipv4+8: val 0a000000 mask 00ffffff
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff94a73db03be0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff94a6ee4c0700 RCX: 000000000000000a
 RDX: 0000000000000000 RSI: ffff94a6ed22c800 RDI: 0000000000000000
 RBP: ffff94a73db03c80 R08: ffff94a7386fa4c8 R09: ffff94a73229ea20
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff94a6ed22cb00
 R13: ffff94a6ed22cb08 R14: 0000000000000001 R15: ffff94a6ed22c800
 FS:  0000000000000000(0000) GS:ffff94a73db00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000007120e002 CR4: 00000000001606e0
 Call Trace:
  <IRQ>
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip6_finish_output2+0x369/0x590
  ip6_finish_output2+0x369/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.35+0x79/0xc0
  mld_sendpack+0x16f/0x220
  mld_ifc_timer_expire+0x195/0x2c0
  ? igmp6_timer_handler+0x70/0x70
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? tick_sched_timer+0x37/0x70
  __do_softirq+0xe3/0x2f5
  irq_exit+0xf0/0x100
  smp_apic_timer_interrupt+0x6c/0x130
  apic_timer_interrupt+0xf/0x20
  </IRQ>
 RIP: 0010:native_safe_halt+0x2/0x10
 Code: 4e ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
 RSP: 0018:ffffab1740387eb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
 RAX: ffffffffb18184f0 RBX: 0000000000000002 RCX: 0000000000000001
 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000002
 RBP: 0000000000000002 R08: 000f168fa695f9a9 R09: 0000000000000020
 R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x1/0x1
  default_idle+0x1c/0x140
  do_idle+0x1c4/0x280
  cpu_startup_entry+0x19/0x20
  start_secondary+0x1a7/0x200
  secondary_startup_64+0xa4/0xb0
 Modules linked in: act_pedit veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep aesni_intel snd_hda_core crypto_simd snd_seq cryptd glue_helper snd_seq_device snd_pcm joydev snd_timer pcspkr virtio_balloon snd soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs qxl ata_generic pata_acpi drm_kms_helper virtio_net net_failover syscopyarea sysfillrect sysimgblt failover virtio_blk fb_sys_fops virtio_console ttm drm crc32c_intel serio_raw ata_piix virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_pedit_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
1e45d043a8 net/sched: act_nat: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action nat ingress 1.18.1.1 1.18.2.2 pass index 90
 # tc actions replace action nat \
 > ingress 1.18.1.1 1.18.2.2 goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action nat

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0:  nat ingress 1.18.1.1/32 1.18.2.2 goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 800000002d180067 P4D 800000002d180067 PUD 7cb8b067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 3 PID: 164 Comm: kworker/3:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffae4500e2fad0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff9fa52e28c800 RCX: 0000000001011201
 RDX: 0000000000000000 RSI: 0000000000000056 RDI: ffff9fa52ca12800
 RBP: ffffae4500e2fb70 R08: 0000000000000022 R09: 000000000000000e
 R10: 00000000ffffffff R11: 0000000001011201 R12: ffff9fa52cbc9c00
 R13: ffff9fa52cbc9c08 R14: 0000000000000001 R15: ffff9fa52ca12780
 FS:  0000000000000000(0000) GS:ffff9fa57db80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000000073f8c004 CR4: 00000000001606e0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
 Modules linked in: act_nat veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper snd_timer snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs qxl ata_generic pata_acpi drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net virtio_blk net_failover failover virtio_console drm crc32c_intel floppy ata_piix libata virtio_pci virtio_ring virtio serio_raw dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_nat_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
c53075ea5d net/sched: act_connmark: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action connmark pass index 90
 # tc actions replace action connmark \
 > goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action connmark

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: connmark zone 0 goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 0 PID: 302 Comm: kworker/0:2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff9bea406c3ad0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff8c5dfc009f00 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff9bea406c3a80 RDI: ffff8c5dfb9d6ec0
 RBP: ffff9bea406c3b70 R08: ffff8c5dfda222a0 R09: ffffffff90933c3c
 R10: 0000000000000000 R11: 0000000092793f7d R12: ffff8c5df48b3c00
 R13: ffff8c5df48b3c08 R14: 0000000000000001 R15: ffff8c5dfb9d6e40
 FS:  0000000000000000(0000) GS:ffff8c5dfda00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000000062e0e006 CR4: 00000000001606f0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
 Modules linked in: act_connmark nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul mbcache crc32_pclmul jbd2 snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel snd_timer crypto_simd cryptd snd glue_helper joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper virtio_net net_failover syscopyarea virtio_blk failover virtio_console sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix crc32c_intel serio_raw libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_connmark_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
ff9721d32b net/sched: act_mirred: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action mirred ingress mirror dev lo pass
 # tc actions replace action mirred \
 > ingress mirror dev lo goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action mirred

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: mirred (Ingress Mirror to device lo) goto chain 42
         index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 Mirror/redirect action on
 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 3 PID: 47 Comm: kworker/3:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffa772404b7ad0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff9c5afc3f4300 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff9c5afdba9380 RDI: 0000000000029380
 RBP: ffffa772404b7b70 R08: ffff9c5af7010028 R09: ffff9c5af7010029
 R10: 0000000000000000 R11: ffff9c5af94c6a38 R12: ffff9c5af7953000
 R13: ffff9c5af7953008 R14: 0000000000000001 R15: ffff9c5af7953d00
 FS:  0000000000000000(0000) GS:ffff9c5afdb80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000007c514004 CR4: 00000000001606e0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
 Modules linked in: act_mirred veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul snd_hda_codec_generic crc32_pclmul snd_hda_intel snd_hda_codec mbcache ghash_clmulni_intel jbd2 snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel snd_timer snd crypto_simd cryptd glue_helper soundcore virtio_balloon joydev pcspkr i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net ttm virtio_blk net_failover virtio_console failover drm ata_piix crc32c_intel virtio_pci serio_raw libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_mirred_init() proved to fix the
above issue. For the same reason, postpone the assignment of tcfa_action
and tcfm_eaction to avoid partial reconfiguration of a mirred rule when
it's replaced by another one that mirrors to a device that does not
exist. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
11a94d7fd8 net/sched: act_ife: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action ife encode allow mark pass index 90
 # tc actions replace action ife \
 > encode allow mark goto chain 42 index 90 cookie c1a0c1a0
 # tc action show action ife

had the following output:

 IFE type 0xED3E
 IFE type 0xED3E
 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: ife encode action goto chain 42 type 0XED3E
         allow mark
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 800000007b4e7067 P4D 800000007b4e7067 PUD 7b4e6067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 2 PID: 164 Comm: kworker/2:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffa6a7c0553ad0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff9796ee1bbd00 RCX: 0000000000000001
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
 RBP: ffffa6a7c0553b70 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: ffff9797385bb038 R12: ffff9796ead9d700
 R13: ffff9796ead9d708 R14: 0000000000000001 R15: ffff9796ead9d800
 FS:  0000000000000000(0000) GS:ffff97973db00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000007c41e006 CR4: 00000000001606e0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
 Modules linked in: act_gact act_meta_mark act_ife dummy veth ip6table_filter ip6_tables iptable_filter binfmt_misc snd_hda_codec_generic ext4 snd_hda_intel snd_hda_codec crct10dif_pclmul mbcache crc32_pclmul jbd2 snd_hwdep snd_hda_core ghash_clmulni_intel snd_seq snd_seq_device snd_pcm snd_timer aesni_intel crypto_simd snd cryptd glue_helper virtio_balloon joydev pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl virtio_net drm_kms_helper virtio_blk net_failover syscopyarea failover sysfillrect virtio_console sysimgblt fb_sys_fops ttm drm crc32c_intel serio_raw ata_piix virtio_pci virtio_ring libata virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_ife]
 CR2: 0000000000000000

Validating the control action within tcf_ife_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
0da2dbd602 net/sched: act_gact: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action gact pass index 90
 # tc actions replace action gact \
 > goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action gact

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: gact action goto chain 42
          random type none pass val 0
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff8c2434703be0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff8c23ed6d7e00 RCX: 000000000000005a
 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8c23ed6d7e00
 RBP: ffff8c2434703c80 R08: ffff8c243b639ac8 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8c2429e68b00
 R13: ffff8c2429e68b08 R14: 0000000000000001 R15: ffff8c2429c5a480
 FS:  0000000000000000(0000) GS:ffff8c2434700000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000002dc0e005 CR4: 00000000001606e0
 Call Trace:
  <IRQ>
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip6_finish_output2+0x369/0x590
  ip6_finish_output2+0x369/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.35+0x79/0xc0
  mld_sendpack+0x16f/0x220
  mld_ifc_timer_expire+0x195/0x2c0
  ? igmp6_timer_handler+0x70/0x70
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? tick_sched_timer+0x37/0x70
  __do_softirq+0xe3/0x2f5
  irq_exit+0xf0/0x100
  smp_apic_timer_interrupt+0x6c/0x130
  apic_timer_interrupt+0xf/0x20
  </IRQ>
 RIP: 0010:native_safe_halt+0x2/0x10
 Code: 74 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
 RSP: 0018:ffff9c8640387eb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
 RAX: ffffffff8b2184f0 RBX: 0000000000000002 RCX: 0000000000000001
 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000002
 RBP: 0000000000000002 R08: 000eb57882b36cc3 R09: 0000000000000020
 R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x1/0x1
  default_idle+0x1c/0x140
  do_idle+0x1c4/0x280
  cpu_startup_entry+0x19/0x20
  start_secondary+0x1a7/0x200
  secondary_startup_64+0xa4/0xb0
 Modules linked in: act_gact act_bpf veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic ext4 snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core mbcache jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper virtio_balloon joydev pcspkr snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea virtio_net sysfillrect net_failover virtio_blk sysimgblt fb_sys_fops virtio_console ttm failover drm crc32c_intel serio_raw ata_piix libata floppy virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_bpf]
 CR2: 0000000000000000

Validating the control action within tcf_gact_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
f5c29d8386 net/sched: act_csum: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall action csum icmp pass index 90
 # tc actions replace action csum icmp goto chain 42 index 90 \
 > cookie c1a0c1a0
 # tc actions show action csum

had the following output:

Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1

        action order 0: csum (icmp) action goto chain 42
        index 90 ref 2 bind 1
        cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 8000000074692067 P4D 8000000074692067 PUD 2e210067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.0.0-rc4.gotochain_crash+ #533
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff93153da03be0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff9314ee40f700 RCX: 0000000000003a00
 RDX: 0000000000000000 RSI: ffff931537c87828 RDI: ffff931537c87818
 RBP: ffff93153da03c80 R08: 00000000527cffff R09: 0000000000000003
 R10: 000000000000003f R11: 0000000000000028 R12: ffff9314edf68400
 R13: ffff9314edf68408 R14: 0000000000000001 R15: ffff9314ed67b600
 FS:  0000000000000000(0000) GS:ffff93153da00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000000073e32003 CR4: 00000000001606f0
 Call Trace:
  <IRQ>
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip6_finish_output2+0x369/0x590
  ip6_finish_output2+0x369/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.35+0x79/0xc0
  mld_sendpack+0x16f/0x220
  mld_ifc_timer_expire+0x195/0x2c0
  ? igmp6_timer_handler+0x70/0x70
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? tick_sched_timer+0x37/0x70
  __do_softirq+0xe3/0x2f5
  irq_exit+0xf0/0x100
  smp_apic_timer_interrupt+0x6c/0x130
  apic_timer_interrupt+0xf/0x20
  </IRQ>
 RIP: 0010:native_safe_halt+0x2/0x10
 Code: 66 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
 RSP: 0018:ffffffff9a803e98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
 RAX: ffffffff99e184f0 RBX: 0000000000000000 RCX: 0000000000000001
 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000000
 RBP: 0000000000000000 R08: 000eb5c4572376b3 R09: 0000000000000000
 R10: ffffa53e806a3ca0 R11: 00000000000f4240 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x1/0x1
  default_idle+0x1c/0x140
  do_idle+0x1c4/0x280
  cpu_startup_entry+0x19/0x20
  start_kernel+0x49e/0x4be
  secondary_startup_64+0xa4/0xb0
 Modules linked in: act_csum veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel mbcache snd_hda_codec jbd2 snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt net_failover fb_sys_fops virtio_console virtio_blk ttm failover drm ata_piix crc32c_intel floppy virtio_pci serio_raw libata virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_csum_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
4e1810049c net/sched: act_bpf: validate the control action inside init()
the following script:

 # tc filter add dev crash0 egress matchall \
 > action bpf bytecode '1,6 0 0 4294967295' pass index 90
 # tc actions replace action bpf \
 > bytecode '1,6 0 0 4294967295' goto chain 42 index 90 cookie c1a0c1a0
 # tc action show action bpf

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: bpf bytecode '1,6 0 0 4294967295' default-action goto chain 42
         index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffb3a0803dfa90 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff942b347ada00 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffb3a08034d038 RDI: ffff942b347ada00
 RBP: ffffb3a0803dfb30 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: ffffb3a0803dfb0c R12: ffff942b3b682b00
 R13: ffff942b3b682b08 R14: 0000000000000001 R15: ffff942b3b682f00
 FS:  00007f6160a72740(0000) GS:ffff942b3da80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 00000000795a4002 CR4: 00000000001606e0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip_finish_output2+0x16f/0x430
  ip_finish_output2+0x16f/0x430
  ? ip_output+0x69/0xe0
  ip_output+0x69/0xe0
  ? ip_forward_options+0x1a0/0x1a0
  ip_send_skb+0x15/0x40
  raw_sendmsg+0x8e1/0xbd0
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0xc/0xa0
  ? try_to_wake_up+0x54/0x480
  ? ldsem_down_read+0x3f/0x280
  ? _cond_resched+0x15/0x40
  ? down_read+0xe/0x30
  ? copy_termios+0x1e/0x70
  ? tty_mode_ioctl+0x1b6/0x4c0
  ? sock_sendmsg+0x36/0x40
  sock_sendmsg+0x36/0x40
  __sys_sendto+0x10e/0x140
  ? do_vfs_ioctl+0xa4/0x640
  ? handle_mm_fault+0xdc/0x210
  ? syscall_trace_enter+0x1df/0x2e0
  ? __audit_syscall_exit+0x216/0x260
  __x64_sys_sendto+0x24/0x30
  do_syscall_64+0x5b/0x180
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f615f7e3c03
 Code: 48 8b 0d 90 62 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 9d c3 2c 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 4b cc 00 00 48 89 04 24
 RSP: 002b:00007ffee5d8cc28 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 RAX: ffffffffffffffda RBX: 000055a4f28f1700 RCX: 00007f615f7e3c03
 RDX: 0000000000000040 RSI: 000055a4f28f1700 RDI: 0000000000000003
 RBP: 00007ffee5d8e340 R08: 000055a4f28ee510 R09: 0000000000000010
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
 R13: 000055a4f28f16c0 R14: 000055a4f28ef69c R15: 0000000000000080
 Modules linked in: act_bpf veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache crct10dif_pclmul jbd2 crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper pcspkr joydev virtio_balloon snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper virtio_blk virtio_net virtio_console net_failover failover syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel ata_piix serio_raw libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_bpf_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Adrian Ratiu
48e5d98a0e selftests/bpf: Add arm target register definitions
eBPF "restricted C" code can be compiled with LLVM/clang using target
triplets like armv7l-unknown-linux-gnueabihf and loaded/run with small
cross-compiled gobpf/elf [1] programs without requiring a full BCC
port which is also undesirable on small embedded systems due to its
size footprint. The only missing pieces are these helper macros which
otherwise have to be redefined by each eBPF arm program.

[1] https://github.com/iovisor/gobpf/tree/master/elf

Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-20 20:28:58 -07:00
Linus Torvalds
a9dce6679d pidfd patches for v5.1-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE7btrcuORLb1XUhEwjrBW1T7ssS0FAlx+nn4ACgkQjrBW1T7s
 sS2kwg//aJUCwLIhV91gXUFN2jHTCf0/+5fnigEk7JhAT5wmAykxLM8tprLlIlyp
 HtwNQx54hq/6p010Ulo9K50VS6JRii+2lNSpC6IkqXXdHXXm0ViH+5I9Nru8SVJ+
 avRCYWNjW9Gn1EtcB2yv6KP3XffgnQ6ZLIr4QJwglOxgAqUaWZ68woSUlrIR5yFj
 j48wAxjsC3g2qwGLvXPeiwYZHwk6VnYmrZ3eWXPDthWRDC4zkjyBdchZZzFJagSC
 6sX8T9s5ua5juZMokEJaWjuBQQyfg0NYu41hupSdVjV7/0D3E+5/DiReInvLmSup
 63bZ85uKRqWTNgl4cmJ1W3aVe2RYYemMZCXVVYYvU+IKpvTSzzYY7us+FyMAIRUV
 bT+XPGzTWcGrChzv9bHZcBrkL91XGqyxRJz56jLl6EhRtqxmzmywf6mO6pS2WK4N
 r+aBDgXeJbG39KguCzwUgVX8hC6YlSxSP8Md+2sK+UoAdfTUvFtdCYnjhuACofCt
 saRvDIPF8N9qn4Ch3InzCKkrUTL/H3BZKBl2jo6tYQ9smUsFZW7lQoip5Ui/0VS+
 qksJ91djOc9facGoOorPazojY5fO5Lj3Hg+cGIoxUV0jPH483z7hWH0ALynb0f6z
 EDsgNyEUpIO2nJMJJfm37ysbU/j1gOpzQdaAEaWeknwtfecFPzM=
 =yOWp
 -----END PGP SIGNATURE-----

Merge tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull pidfd system call from Christian Brauner:
 "This introduces the ability to use file descriptors from /proc/<pid>/
  as stable handles on struct pid. Even if a pid is recycled the handle
  will not change. For a start these fds can be used to send signals to
  the processes they refer to.

  With the ability to use /proc/<pid> fds as stable handles on struct
  pid we can fix a long-standing issue where after a process has exited
  its pid can be reused by another process. If a caller sends a signal
  to a reused pid it will end up signaling the wrong process.

  With this patchset we enable a variety of use cases. One obvious
  example is that we can now safely delegate an important part of
  process management - sending signals - to processes other than the
  parent of a given process by sending file descriptors around via scm
  rights and not fearing that the given process will have been recycled
  in the meantime. It also allows for easy testing whether a given
  process is still alive or not by sending signal 0 to a pidfd which is
  quite handy.

  There has been some interest in this feature e.g. from systems
  management (systemd, glibc) and container managers. I have requested
  and gotten comments from glibc to make sure that this syscall is
  suitable for their needs as well. In the future I expect it to take on
  most other pid-based signal syscalls. But such features are left for
  the future once they are needed.

  This has been sitting in linux-next for quite a while and has not
  caused any issues. It comes with selftests which verify basic
  functionality and also test that a recycled pid cannot be signaled via
  a pidfd.

  Jon has written about a prior version of this patchset. It should
  cover the basic functionality since not a lot has changed since then:

      https://lwn.net/Articles/773459/

  The commit message for the syscall itself is extensively documenting
  the syscall, including it's functionality and extensibility"

* tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  selftests: add tests for pidfd_send_signal()
  signal: add pidfd_send_signal() syscall
2019-03-16 13:47:14 -07:00
Linus Torvalds
f67e3fb489 device-dax for 5.1
* Replace the /sys/class/dax device model with /sys/bus/dax, and include
   a compat driver so distributions can opt-in to the new ABI.
 
 * Allow for an alternative driver for the device-dax address-range
 
 * Introduce the 'kmem' driver to hotplug / assign a device-dax
   address-range to the core-mm.
 
 * Arrange for the device-dax target-node to be onlined so that the newly
   added memory range can be uniquely referenced by numa apis.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJchWpGAAoJEB7SkWpmfYgCJk8P/0Q1DINszUDO/vKjJ09cDs9P
 Jw3it6GBIL50rDOu9QdcprSpwYDD0h1mLAV/m6oa3bVO+p4uWGvnxaxRx2HN2c/v
 vhZFtUDpHlqR63vzWMNVKRprYixCRJDUr6xQhhCcE3ak/ELN6w7LWfikKVWv15UL
 MfR96IQU38f+xRda/zSXnL9606Dvkvu/inEHj84lRcHIwj3sQAUalrE8bR3O32gZ
 bDg/l5kzT49o8ZXUo/TegvRSSSZpJmOl2DD0RW+ax5q3NI2bOXFrVDUKBKxf/hcQ
 E/V9i57TrqQx0GqRhnU7rN/v53cFZGGs31TEEIB/xs3bzCnADxwXcjL5b5K005J6
 vJjBA2ODBewHFK3uVx46Hy1iV4eCtZWj4QrMnrjdSrjXOfbF5GTbWOhPFgoq7TWf
 S7VqFEf3I2gDPaMq4o8Ej1kLH4HMYeor2NSOZjyvGn87rSZ3ZIQguwbaNIVl+itz
 gdDt0ZOU0BgOBkV+rZIeZDaGdloWCHcDPL15CkZaOZyzdWhfEZ7dod6ad+9udilU
 EUPH62RgzXZtfm5zpebYyjNVLbb9pLZ0nT+UypyGR6zqWx1SqU3mXi63NFXPco+x
 XA9j//edPeI6NHg2CXLEh8DLuCg3dG1zWRJANkiF+niBwyCR8CHtGWAoY6soXbKe
 2UrXGcIfXxyJ8V9v8v4q
 =hfa3
 -----END PGP SIGNATURE-----

Merge tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull device-dax updates from Dan Williams:
 "New device-dax infrastructure to allow persistent memory and other
  "reserved" / performance differentiated memories, to be assigned to
  the core-mm as "System RAM".

  Some users want to use persistent memory as additional volatile
  memory. They are willing to cope with potential performance
  differences, for example between DRAM and 3D Xpoint, and want to use
  typical Linux memory management apis rather than a userspace memory
  allocator layered over an mmap() of a dax file. The administration
  model is to decide how much Persistent Memory (pmem) to use as System
  RAM, create a device-dax-mode namespace of that size, and then assign
  it to the core-mm. The rationale for device-dax is that it is a
  generic memory-mapping driver that can be layered over any "special
  purpose" memory, not just pmem. On subsequent boots udev rules can be
  used to restore the memory assignment.

  One implication of using pmem as RAM is that mlock() no longer keeps
  data off persistent media. For this reason it is recommended to enable
  NVDIMM Security (previously merged for 5.0) to encrypt pmem contents
  at rest. We considered making this recommendation an actively enforced
  requirement, but in the end decided to leave it as a distribution /
  administrator policy to allow for emulation and test environments that
  lack security capable NVDIMMs.

  Summary:

   - Replace the /sys/class/dax device model with /sys/bus/dax, and
     include a compat driver so distributions can opt-in to the new ABI.

   - Allow for an alternative driver for the device-dax address-range

   - Introduce the 'kmem' driver to hotplug / assign a device-dax
     address-range to the core-mm.

   - Arrange for the device-dax target-node to be onlined so that the
     newly added memory range can be uniquely referenced by numa apis"

NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because
we currently have special - and very annoying rules in the kernel about
accessing PMEM only with the "MC safe" accessors, because machine checks
inside the regular repeat string copy functions can be fatal in some
(not described) circumstances.

And apparently the PMEM modules can cause that a lot more than regular
RAM.  The argument is that this happens because PMEM doesn't necessarily
get scrubbed at boot like RAM does, but that is planned to be added for
the user space tooling.

Quoting Dan from another email:
 "The exposure can be reduced in the volatile-RAM case by scanning for
  and clearing errors before it is onlined as RAM. The userspace tooling
  for that can be in place before v5.1-final. There's also runtime
  notifications of errors via acpi_nfit_uc_error_notify() from
  background scrubbers on the DIMM devices. With that mechanism the
  kernel could proactively clear newly discovered poison in the volatile
  case, but that would be additional development more suitable for v5.2.

  I understand the concern, and the need to highlight this issue by
  tapping the brakes on feature development, but I don't see PMEM as RAM
  making the situation worse when the exposure is also there via DAX in
  the PMEM case. Volatile-RAM is arguably a safer use case since it's
  possible to repair pages where the persistent case needs active
  application coordination"

* tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: "Hotplug" persistent memory for use like normal RAM
  mm/resource: Let walk_system_ram_range() search child resources
  mm/memory-hotplug: Allow memory resources to be children
  mm/resource: Move HMM pr_debug() deeper into resource code
  mm/resource: Return real error codes from walk failures
  device-dax: Add a 'modalias' attribute to DAX 'bus' devices
  device-dax: Add a 'target_node' attribute
  device-dax: Auto-bind device after successful new_id
  acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node
  device-dax: Add /sys/class/dax backwards compatibility
  device-dax: Add support for a dax override driver
  device-dax: Move resource pinning+mapping into the common driver
  device-dax: Introduce bus + driver model
  device-dax: Start defining a dax bus model
  device-dax: Remove multi-resource infrastructure
  device-dax: Kill dax_region base
  device-dax: Kill dax_region ida
2019-03-16 13:05:32 -07:00
David S. Miller
0aedadcf6b Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2019-03-16

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a umem memory leak on cleanup in AF_XDP, from Björn.

2) Fix BTF to properly resolve forward-declared enums into their corresponding
   full enum definition types during deduplication, from Andrii.

3) Fix libbpf to reject invalid flags in xsk_socket__create(), from Magnus.

4) Fix accessing invalid pointer returned from bpf_tcp_sock() and
   bpf_sk_fullsock() after bpf_sk_release() was called, from Martin.

5) Fix generation of load/store DW instructions in PPC JIT, from Naveen.

6) Various fixes in BPF helper function documentation in bpf.h UAPI header
   used to bpf-helpers(7) man page, from Quentin.

7) Fix segfault in BPF test_progs when prog loading failed, from Yonghong.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-16 12:20:08 -07:00
Linus Torvalds
636deed6c0 ARM: some cleanups, direct physical timer assignment, cache sanitization
for 32-bit guests
 
 s390: interrupt cleanup, introduction of the Guest Information Block,
 preparation for processor subfunctions in cpu models
 
 PPC: bug fixes and improvements, especially related to machine checks
 and protection keys
 
 x86: many, many cleanups, including removing a bunch of MMU code for
 unnecessary optimizations; plus AVIC fixes.
 
 Generic: memcg accounting
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJci+7XAAoJEL/70l94x66DUMkIAKvEefhceySHYiTpfefjLjIC
 16RewgHa+9CO4Oo5iXiWd90fKxtXLXmxDQOS4VGzN0rxvLGRw/fyXIxL1MDOkaAO
 l8SLSNuewY4XBUgISL3PMz123r18DAGOuy9mEcYU/IMesYD2F+wy5lJ17HIGq6X2
 RpoF1p3qO1jfkPTKOob6Ixd4H5beJNPKpdth7LY3PJaVhDxgouj32fxnLnATVSnN
 gENQ10fnt8BCjshRYW6Z2/9bF15JCkUFR1xdBW2/xh1oj+kvPqqqk2bEN1eVQzUy
 2hT/XkwtpthqjSbX8NNavWRSFnOnbMLTRKQyIXmFVsM5VoSrwtiGsCFzBgcT++I=
 =XIzU
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "ARM:
   - some cleanups
   - direct physical timer assignment
   - cache sanitization for 32-bit guests

  s390:
   - interrupt cleanup
   - introduction of the Guest Information Block
   - preparation for processor subfunctions in cpu models

  PPC:
   - bug fixes and improvements, especially related to machine checks
     and protection keys

  x86:
   - many, many cleanups, including removing a bunch of MMU code for
     unnecessary optimizations
   - AVIC fixes

  Generic:
   - memcg accounting"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits)
  kvm: vmx: fix formatting of a comment
  KVM: doc: Document the life cycle of a VM and its resources
  MAINTAINERS: Add KVM selftests to existing KVM entry
  Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()"
  KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char()
  KVM: PPC: Fix compilation when KVM is not enabled
  KVM: Minor cleanups for kvm_main.c
  KVM: s390: add debug logging for cpu model subfunctions
  KVM: s390: implement subfunction processor calls
  arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2
  KVM: arm/arm64: Remove unused timer variable
  KVM: PPC: Book3S: Improve KVM reference counting
  KVM: PPC: Book3S HV: Fix build failure without IOMMU support
  Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()"
  x86: kvmguest: use TSC clocksource if invariant TSC is exposed
  KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start
  KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter
  KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns
  KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes()
  KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children
  ...
2019-03-15 15:00:28 -07:00
Alexey Dobriyan
17415606f9 tools/testing/selftests/proc/proc-pid-vm.c: test with vsyscall in mind
: selftests: proc: proc-pid-vm
: ========================================
: proc-pid-vm: proc-pid-vm.c:277: main: Assertion `rv == strlen(buf0)' failed.
: Aborted

Because the vsyscall mapping is enabled.  Read from vsyscall page to tell
if vsyscall is being used.

Link: http://lkml.kernel.org/r/20190307183204.GA11405@avx2
Link: http://lkml.kernel.org/r/20190219094722.GB28258@shao2-debian
Fixes: 34aab6bec23e7e9 ("proc: test /proc/*/maps, smaps, smaps_rollup, statm")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 14:36:20 -07:00
Andrii Nakryiko
8fd7a61aa5 selftests/bpf: add fwd enum resolution test for btf_dedup
This patch adds test verifying new btf_dedup logic of resolving
forward-declared enums.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-14 13:53:18 -07:00
Martin KaFai Lau
7681e7b2fb bpf: Add an example for bpf_get_listener_sock
This patch adds an example in using the new helper
bpf_get_listener_sock().

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-13 12:04:35 -07:00
Martin KaFai Lau
b55aa7b04b bpf: Test ref release issue in bpf_tcp_sock and bpf_sk_fullsock
Adding verifier tests to ensure the ptr returned from bpf_tcp_sock() and
bpf_sk_fullsock() cannot be accessed after bpf_sk_release() is called.
A few of the tests are derived from a reproducer test by Lorenz Bauer.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-13 12:04:35 -07:00
Yonghong Song
d6f1837107 selftests/bpf: fix segfault of test_progs when prog loading failed
The test_progs subtests, test_spin_lock() and test_map_lock(),
requires BTF present to run successfully.
Currently, when BTF failed to load, test_progs will segfault,
  $ ./test_progs
  ...
  12: (bf) r1 = r8
  13: (85) call bpf_spin_lock#93
  map 'hash_map' has to have BTF in order to use bpf_spin_lock

  libbpf: -- END LOG --
  libbpf: failed to load program 'map_lock_demo'
  libbpf: failed to load object './test_map_lock.o'
  test_map_lock:bpf_prog_load errno 13
  Segmentation fault

The segfault is caused by uninitialized variable "obj", which
is used in bpf_object__close(obj), when bpf prog failed to load.

Initializing variable "obj" to NULL in two occasions fixed the problem.
  $ ./test_progs
  ...
  Summary: 219 PASSED, 2 FAILED

Fixes: b4d4556c32 ("selftests/bpf: add bpf_spin_lock verifier tests")
Fixes: ba72a7b4ba ("selftests/bpf: test for BPF_F_LOCK")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-12 21:55:54 +01:00
Linus Torvalds
a667cb7a94 Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:

 - a few misc things

 - the rest of MM

-  remove flex_arrays, replace with new simple radix-tree implementation

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (38 commits)
  Drop flex_arrays
  sctp: convert to genradix
  proc: commit to genradix
  generic radix trees
  selinux: convert to kvmalloc
  md: convert to kvmalloc
  openvswitch: convert to kvmalloc
  of: fix kmemleak crash caused by imbalance in early memory reservation
  mm: memblock: update comments and kernel-doc
  memblock: split checks whether a region should be skipped to a helper function
  memblock: remove memblock_{set,clear}_region_flags
  memblock: drop memblock_alloc_*_nopanic() variants
  memblock: memblock_alloc_try_nid: don't panic
  treewide: add checks for the return value of memblock_alloc*()
  swiotlb: add checks for the return value of memblock_alloc*()
  init/main: add checks for the return value of memblock_alloc*()
  mm/percpu: add checks for the return value of memblock_alloc*()
  sparc: add checks for the return value of memblock_alloc*()
  ia64: add checks for the return value of memblock_alloc*()
  arch: don't memset(0) memory returned by memblock_alloc()
  ...
2019-03-12 10:39:53 -07:00
Zev Weiss
fec5248668 tools/testing/selftests/sysctl/sysctl.sh: add tests for >32-bit values written to 32-bit integers
Patch series "sysctl: fix range-checking in do_proc_dointvec_minmax_conv()", v2.

After being left with an unusable system after a typo executing
something like 'echo $((1<<24)) > /proc/sys/vm/max_map_count', I found
that do_proc_dointvec_minmax_conv() was missing a check to ensure that
the converted value actually fits in an int.

The first of the following patches enhances the sysctl selftest such
that it detects this problem; the second provides a minimal fix
(suitable for -stable) such that the selftest passes.  The third patch
then performs a more thorough refactoring to eliminate the code
duplication that led to the bug in the first place (maintaining the
passing status of the selftest).

This patch (of 3):

At present this exposes a bug in do_proc_dointvec_minmax_conv() (it
fails to check for values that are too wide to fit in an int).

Link: http://lkml.kernel.org/r/20190207123426.9202-2-zev@bewilderbeest.net
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 10:04:00 -07:00
Linus Torvalds
6cdfa54cd2 The biggest change for this release is in the histogram code.
- Add "onchange(var)" histogram handler that executes a action when $var
    changes.
 
  - Add new "snapshot()" action for histogram handlers, that causes a
    snapshot of the ring buffer when triggered.
    ie. onchange(var).snapshot() will trigger a snapshot if var changes.
 
  - Add alternative for "trace()" action.
    Currently, to trigger a synthetic event, the name of that event is used
    as the handler name, which is inconsistent with the other actions.
    onchange(var).synthetic(param) where it can now be
    onchange(var).trace(synthetic, param). The older method will still be
    allowed, as long as the synthetic events do not overlap with other
    handler names.
 
  - The histogram documentation at testcases were updated for the new
    changes.
 
 Added a quicker way to enable set_ftrace_filter files, that will make
 it much quicker to bisect tracing a function that shouldn't be traced and
 crashes the kernel. (You can echo in numbers to set_ftrace_filter, and it
 will select the corresponding function that is in
 available_filter_functions).
 
 Some better displaying of the tracing data (and more information was added).
 
 The rest are small fixes and more clean ups to the code.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXIXXjRQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qrSJAQCbGXAvZE+shfKRhbU1cu1C1nwRMHhH
 eeRecJs1RChGFgD/TwatD4FzARQPjfk7snQD5KWPpoRc9grUACC2cZcaWwQ=
 =LVBI
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "The biggest change for this release is in the histogram code:

   - Add "onchange(var)" histogram handler that executes a action when
     $var changes.

   - Add new "snapshot()" action for histogram handlers, that causes a
     snapshot of the ring buffer when triggered. ie.
     onchange(var).snapshot() will trigger a snapshot if var changes.

   - Add alternative for "trace()" action. Currently, to trigger a
     synthetic event, the name of that event is used as the handler
     name, which is inconsistent with the other actions.
     onchange(var).synthetic(param) where it can now be
     onchange(var).trace(synthetic, param). The older method will still
     be allowed, as long as the synthetic events do not overlap with
     other handler names.

   - The histogram documentation at testcases were updated for the new
     changes.

  Outside of the histogram code, we have:

   - Added a quicker way to enable set_ftrace_filter files, that will
     make it much quicker to bisect tracing a function that shouldn't be
     traced and crashes the kernel. (You can echo in numbers to
     set_ftrace_filter, and it will select the corresponding function
     that is in available_filter_functions).

   - Some better displaying of the tracing data (and more information
     was added).

  The rest are small fixes and more clean ups to the code"

* tag 'trace-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (37 commits)
  tracing: Use strncpy instead of memcpy when copying comm in trace.c
  tracing: Use strncpy instead of memcpy when copying comm for hist triggers
  tracing: Use strncpy instead of memcpy for string keys in hist triggers
  tracing: Use str_has_prefix() in synth_event_create()
  x86/ftrace: Fix warning and considate ftrace_jmp_replace() and ftrace_call_replace()
  tracing/perf: Use strndup_user() instead of buggy open-coded version
  doc: trace: Fix documentation for uprobe_profile
  tracing: Fix spelling mistake: "analagous" -> "analogous"
  tracing: Comment why cond_snapshot is checked outside of max_lock protection
  tracing: Add hist trigger action 'expected fail' test case
  tracing: Add alternative synthetic event trace action test case
  tracing: Add hist trigger onchange() handler test case
  tracing: Add hist trigger snapshot() action test case
  tracing: Add SPDX license GPL-2.0 license identifier to inter-event testcases
  tracing: Add alternative synthetic event trace action syntax
  tracing: Add hist trigger onchange() handler Documentation
  tracing: Add hist trigger onchange() handler
  tracing: Add hist trigger snapshot() action Documentation
  tracing: Add hist trigger snapshot() action
  tracing: Add conditional snapshot
  ...
2019-03-11 17:01:32 -07:00
Linus Torvalds
6bc3fe8e7e tools: mark 'test_vmalloc.sh' executable
Several of these scripts have come in as old-fashioned patches, and in
the process lost the executable bit.  In most cases it doesn't matter,
since the test infrastructure will explicitly execute them using the
proper shell interpreter, but at least in the case of the new vmalloc
test, the lack of execurable bit caused the test to fail with

    ./run_vmtests: line 217: ./test_vmalloc.sh: Permission denied

because of the lacking exectuable permissions bit.

This patch fixes that up.

NOTE! A simple script to look for non-executable scripts in the kernel,
something like

    git ls-files --stage -- '*.sh' |
        grep 100644 |
        cut -f2 |
        xargs grep -l '#!'

will show that there's a lot of other files that _look_ like executable
shell scripts, but don't have the executable bit set.  I considered just
scripting them all to be executable, but since it looks like the common
pattern is to not really require it, I'm just doing the minimal fix as
pointed out by the kernel test robot.

Fixes: a05ef00c97 ("selftests/vm: add script helper for CONFIG_TEST_VMALLOC_MODULE")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-11 10:10:29 -07:00
Linus Torvalds
8f49a658b4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "First batch of fixes in the new merge window:

   1) Double dst_cache free in act_tunnel_key, from Wenxu.

   2) Avoid NULL deref in IN_DEV_MFORWARD() by failing early in the
      ip_route_input_rcu() path, from Paolo Abeni.

   3) Fix appletalk compile regression, from Arnd Bergmann.

   4) If SLAB objects reach the TCP sendpage method we are in serious
      trouble, so put a debugging check there. From Vasily Averin.

   5) Memory leak in hsr layer, from Mao Wenan.

   6) Only test GSO type on GSO packets, from Willem de Bruijn.

   7) Fix crash in xsk_diag_put_umem(), from Eric Dumazet.

   8) Fix VNIC mailbox length in nfp, from Dirk van der Merwe.

   9) Fix race in ipv4 route exception handling, from Xin Long.

  10) Missing DMA memory barrier in hns3 driver, from Jian Shen.

  11) Use after free in __tcf_chain_put(), from Vlad Buslov.

  12) Handle inet_csk_reqsk_queue_add() failures, from Guillaume Nault.

  13) Return value correction when ip_mc_may_pull() fails, from Eric
      Dumazet.

  14) Use after free in x25_device_event(), also from Eric"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits)
  gro_cells: make sure device is up in gro_cells_receive()
  vxlan: test dev->flags & IFF_UP before calling gro_cells_receive()
  net/x25: fix use-after-free in x25_device_event()
  isdn: mISDNinfineon: fix potential NULL pointer dereference
  net: hns3: fix to stop multiple HNS reset due to the AER changes
  ip: fix ip_mc_may_pull() return value
  net: keep refcount warning in reqsk_free()
  net: stmmac: Avoid one more sometimes uninitialized Clang warning
  net: dsa: mv88e6xxx: Set correct interface mode for CPU/DSA ports
  rxrpc: Fix client call queueing, waiting for channel
  tcp: handle inet_csk_reqsk_queue_add() failures
  net: ethernet: sun: Zero initialize class in default case in niu_add_ethtool_tcam_entry
  8139too : Add support for U.S. Robotics USR997901A 10/100 Cardbus NIC
  fou, fou6: avoid uninit-value in gue_err() and gue6_err()
  net: sched: fix potential use-after-free in __tcf_chain_put()
  vhost: silence an unused-variable warning
  vsock/virtio: fix kernel panic from virtio_transport_reset_no_sock
  connector: fix unsafe usage of ->real_parent
  vxlan: do not need BH again in vxlan_cleanup()
  net: hns3: add dma_rmb() for rx description
  ...
2019-03-11 08:54:01 -07:00
Linus Torvalds
5af7f11588 Merge branch 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull tpm updates from James Morris:

 - Clean up the transmission flow

   Cleaned up the whole transmission flow. Locking of the chip is now
   done in the level of tpm_try_get_ops() and tpm_put_ops() instead
   taking the chip lock inside tpm_transmit(). The nested calls inside
   tpm_transmit(), used with the resource manager, have been refactored
   out.

   Should make easier to perform more complex transactions with the TPM
   without making the subsystem a bigger mess (e.g. encrypted channel
   patches by James Bottomley).

 - PPI 1.3 support

   TPM PPI 1.3 introduces an additional optional command parameter that
   may be needed for some commands. Display the parameter if the command
   requires such a parameter. Only command 23 (SetPCRBanks) needs one.

   The PPI request file will show output like this then:

      # echo "23 16" > request
      # cat request
      23 16

      # echo "5" > request
      # cat request
      5

 - Extend all PCR banks in IMA

   Instead of static PCR banks array, the array of available PCR banks
   is now allocated dynamically. The digests sizes are determined
   dynamically using a probe PCR read without relying crypto's static
   list of hash algorithms.

   This should finally make sealing of measurements in IMA safe and
   secure.

 - TPM 2.0 selftests

   Added a test suite to tools/testing/selftests/tpm2 previously outside
   of the kernel tree: https://github.com/jsakkine-intel/tpm2-scripts

* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (37 commits)
  tpm/ppi: Enable submission of optional command parameter for PPI 1.3
  tpm/ppi: Possibly show command parameter if TPM PPI 1.3 is used
  tpm/ppi: Display up to 101 operations as define for version 1.3
  tpm/ppi: rename TPM_PPI_REVISION_ID to TPM_PPI_REVISION_ID_1
  tpm/ppi: pass function revision ID to tpm_eval_dsm()
  tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()
  KEYS: trusted: explicitly use tpm_chip structure from tpm_default_chip()
  tpm: move tpm_chip definition to include/linux/tpm.h
  tpm: retrieve digest size of unknown algorithms with PCR read
  tpm: rename and export tpm2_digest and tpm2_algorithms
  tpm: dynamically allocate the allocated_banks array
  tpm: remove @flags from tpm_transmit()
  tpm: take TPM chip power gating out of tpm_transmit()
  tpm: introduce tpm_chip_start() and tpm_chip_stop()
  tpm: remove TPM_TRANSMIT_UNLOCKED flag
  tpm: use tpm_try_get_ops() in tpm-sysfs.c.
  tpm: remove @space from tpm_transmit()
  tpm: move TPM space code out of tpm_transmit()
  tpm: move tpm_validate_commmand() to tpm2-space.c
  tpm: clean up tpm_try_transmit() error handling flow
  ...
2019-03-10 17:37:29 -07:00
Linus Torvalds
96a6de1a54 media updates for v5.1-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcgUDlAAoJEAhfPr2O5OEV2kIP/AiHMkMGi/fXmwzN0tFjYkim
 39t6rodj6rT/oMib4XvW55GjQy5sdXwz+1jE+kZA5imbUvt6YzUXFBzIBOGOIF0n
 1MukKa7M6ragnm2yR+42ucBr3jcuc91/keeVzWgP2cgeZeKUlBHme+rECYnwqDdT
 9rcG4U2XL0Wolbm4lAispaWYIYoOURvPeryJ244vlPmch5/2nmXbG7AgNlfJsAw4
 NFmdHBWxLeyB8F95ToikhuNlTWrsvdVHPHbDaDPwioSulZ1vw+lu4CHRd1uZo2iH
 W0INE65ukgyenzTDbmnj5/oWCqV4KRTs8A2x6eimz+wG/60jWQjDiBLSzhxjBH7x
 alrwhxnW3bD31ZUCkmaGd1+3txvLf+Lup9lLX3GCBKA45dW9pzVCLfxSfNaKKlTL
 0xCYSMxl5xbl8TL6hHxK7/n+LsButgTRWIoJpqkM9uPrljwzznpgqJvARqSuHEKJ
 3Tvnkc2DZsmlM8L02i929BsrsoTncm6wBBVlCJzhL0VNaOuL7yJVzXhrw7b/dZZw
 IZu6cH5RrZhIQR4y1UPlaEZoidUGvR0+K997AsURIHJA0RolWE5eI2JHSE86EX8S
 bzG5SChkQmbpYt5OXQvg5VxvqVElx/5/tamcHe/rKwaAwaG9aI9HICgP2e0Zaoce
 YOMJUpcHtSY5Fedk8P1a
 =tD1x
 -----END PGP SIGNATURE-----

Merge tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - remove sensor drivers that got converted from soc_camera

 - remaining soc_camera drivers got moved to staging

 - some documentation cleanups and improvements

 - the imx staging driver now supports imx7

 - the ov9640, mt9m001 and mt9m111 got converted from soc_camera

 - the vim2m driver now does what a m2m convert driver expects to do

 - epoll() fixes on media subsystems

 - several drivers fixes, typos, cleanups and improvements

* tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (346 commits)
  media: dvb/earth-pt1: fix wrong initialization for demod blocks
  media: vim2m: Address some coding style issues
  media: vim2m: don't use BUG()
  media: vim2m: speedup passthrough copy
  media: vim2m: add an horizontal scaler
  media: vim2m: don't accept YUYV anymore as output format
  media: vim2m: add vertical linear scaler
  media: vim2m: better handle cap/out buffers with different sizes
  media: vim2m: use different framesizes for bayer formats
  media: vim2m: add support for VIDIOC_ENUM_FRAMESIZES
  media: vim2m: ensure that width is multiple of two
  media: vim2m: improve debug messages
  media: vim2m: add bayer capture formats
  media: a few more typos at staging, pci, platform, radio and usb
  media: Documentation: fix several typos
  media: staging: fix several typos
  media: include: fix several typos
  media: common: fix several typos
  media: v4l2-core: fix several typos
  media: usb: fix several typos
  ...
2019-03-09 14:45:54 -08:00
Linus Torvalds
a448c643bc linux-kselftest-5.1-rc1
This Kselftest update for Linux 5.1-rc1 consists of
 
 - ir test compile warnings fixes
 - seccomp test fixes and improvements from Tycho Andersen and Kees Cook
 - ftrace fixes to non-POSIX-compliant constructs in colored output code
   and handling absence of tput from Juerg Haefliger
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAlyAMs0ACgkQCwJExA0N
 Qxwmmg/9HNey+j6hxIz96UvaLPqTe0cwiIOs/vrU2OQ3fBQCH+th+m9zdh+bKZKc
 xGRKrlDsgwuw+u3f+sYy27IZHgMc4jzLvsdd2Abw5z6jJKaVw5EnT55LWarZu/R3
 xFhdWWx7+4F7XwpP9bUGTKXv1doPJoXt/VRZjuOA3h/D3PFaWklMYem7oZ0YAhQF
 +nVeMBv2s0iIG9sdGY7dBQ78WgZr14dyKuvrPseCKJ17ldO6R5xfT5kmziSbE5Ne
 Ys/LJujNaSCS9su0Ha3w/TednpOepsTiJ+4uinhJ3OBlVgRHKgjpM8g1emAm//Sf
 cqsT8XZbijkkvwyHLE18ccX2TmZ9HMByZTOJx4NUqR0MSzisR+Wy61AXk2RwmirF
 UGhjFk+ewMCAP/q5GnXgSunWmx3hGoKmMMRdIwhZIltrfC4tqESW4oucjbwVfvCA
 oeRlZv1LHeVLBzgWppQoUlqkZGyXeoV1HHj3AaIwqq18WsYkpm+mAAj6xaIM6Egj
 mdrxJLdwkmrMClaJFQYIzvAVArFBD7rh8eN12BDtifecF9tIj4WV4yYwqVx9nETd
 9zNaCHy1UJorgzgCkptkSBZt84tc3C0MWb33KQP+rF4FaReq735L/DUyFQCQcqCs
 q2ZtiRZ+BVGJyT1oCSeS95CaQeJ2L+1h0PeoBkNl6+I8QIWntEo=
 =1CrX
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest update fromShuah Khan:

 - ir test compile warnings fixes

 - seccomp test fixes and improvements from Tycho Andersen and Kees Cook

 - ftrace fixes to non-POSIX-compliant constructs in colored output code
   and handling absence of tput from Juerg Haefliger

* tag 'linux-kselftest-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/ftrace: Handle the absence of tput
  selftests/ftrace: Replace \e with \033
  selftests/ftrace: Replace echo -e with printf
  selftests: ir: skip when non-root user runs the test
  selftests: ir: skip when lirc device doesn't exist.
  selftests: ir: fix warning: "%s" directive output may be truncated ’ directive output may be truncated
  selftests/seccomp: Actually sleep for 1/10th second
  selftests/harness: Update named initializer syntax
  selftests: unshare userns in seccomp pidns testcases
  selftests: set NO_NEW_PRIVS bit in seccomp user tests
  selftests: skip seccomp get_metadata test if not real root
  selftest: include stdio.h in kselftest.h
  selftests: fix typo in seccomp_bpf.c
  selftests: don't kill child immediately in get_metadata() test
2019-03-09 09:19:31 -08:00
Linus Torvalds
b7af27bf94 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Jiri Kosina:

 - support for something we call 'atomic replace', and allows for much
   better handling of cumulative patches (which is something very useful
   for distros), from Jason Baron with help of Petr Mladek and Joe
   Lawrence

 - improvement of handling of tasks blocking finalization, from Miroslav
   Benes

 - update of MAINTAINERS file to reflect move towards group
   maintainership

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: (22 commits)
  livepatch/selftests: use "$@" to preserve argument list
  livepatch: Module coming and going callbacks can proceed with all listed patches
  livepatch: Proper error handling in the shadow variables selftest
  livepatch: return -ENOMEM on ptr_id() allocation failure
  livepatch: Introduce klp_for_each_patch macro
  livepatch: core: Return EOPNOTSUPP instead of ENOSYS
  selftests/livepatch: add DYNAMIC_DEBUG config dependency
  livepatch: samples: non static warnings fix
  livepatch: update MAINTAINERS
  livepatch: Remove signal sysfs attribute
  livepatch: Send a fake signal periodically
  selftests/livepatch: introduce tests
  livepatch: Remove ordering (stacking) of the livepatches
  livepatch: Atomic replace and cumulative patches documentation
  livepatch: Remove Nop structures when unused
  livepatch: Add atomic replace
  livepatch: Use lists to manage patches, objects and functions
  livepatch: Simplify API by removing registration step
  livepatch: Don't block the removal of patches loaded after a forced transition
  livepatch: Consolidate klp_free functions
  ...
2019-03-08 08:58:25 -08:00
Linus Torvalds
6c3ac11343 powerpc updates for 5.1
Notable changes:
 
  - Enable THREAD_INFO_IN_TASK to move thread_info off the stack.
 
  - A big series from Christoph reworking our DMA code to use more of the generic
    infrastructure, as he said:
    "This series switches the powerpc port to use the generic swiotlb and
     noncoherent dma ops, and to use more generic code for the coherent direct
     mapping, as well as removing a lot of dead code."
 
  - Increase our vmalloc space to 512T with the Hash MMU on modern CPUs, allowing
    us to support machines with larger amounts of total RAM or distance between
    nodes.
 
  - Two series from Christophe, one to optimise TLB miss handlers on 6xx, and
    another to optimise the way STRICT_KERNEL_RWX is implemented on some 32-bit
    CPUs.
 
  - Support for KCOV coverage instrumentation which means we can run syzkaller
    and discover even more bugs in our code.
 
 And as always many clean-ups, reworks and minor fixes etc.
 
 Thanks to:
  Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea Arcangeli, Andrew
  Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir Singh, Brajeswar Ghosh,
  Breno Leitao, Christian Lamparter, Christian Zigotzky, Christophe Leroy,
  Christoph Hellwig, Corentin Labbe, Daniel Axtens, David Gibson, Diana Craciun,
  Firoz Khan, Gustavo A. R. Silva, Igor Stoppa, Joe Lawrence, Joel Stanley,
  Jonathan Neuschäfer, Jordan Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh
  Salgaonkar, Mark Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce,
  Meelis Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot, Nicholas
  Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran, Paul Mackerras,
  Peter Xu, PrasannaKumar Muralidharan, Qian Cai, Rashmica Gupta, Reza Arbab,
  Robert P. J. Day, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Sandipan Das,
  Sergey Senozhatsky, Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav
  Jain, YueHaibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcgRJlAAoJEFHr6jzI4aWAL9oP+gPlrZgyaAg/51lmubLtlbtk
 QuGU8EiuJZoJD1OHrMPtppBOY7rQZOxJe58AoPig8wTvs+j/TxJ25fmiZncnf5U2
 PC8QAjbj0UmQHgy+K30sUeOnDg9tdkHKHJ5/ecjJcvykkqsjyMnV7biFQ1cOA0HT
 LflXHEEtiG9P9u7jZoAhtnfpgn1/l9mhTYMe26J1fqvC0164qMDFaXDTQXyDfyvG
 gmuqccGMawSk7IdagmQxwXtwyfwOnarmGn+n31XKRejApGZ/pjiEA23JOJOaJcia
 m76Jy3roao6sEtCUNpBFXEtwOy9POy3OiGy6yg/9896tDMvG84OuO6ltV1nFGawL
 PmwE+ug63L4g/HWxZyAeb26T2oTTp/YIaKQPtsq4d286pvg/qr2KPNzFoAEhmJqU
 yLrebv276pVeiLpLmCLPvcPj9t76vWKZaUm0FoE+zUDg7Rl7Alow8A/c4tdjOI6y
 QwpbCiYseyiJ32lCZZdbN7Cy6+iM6vb3i1oNKc8MVqhBGTwLJnTU0ruPBSvCaRvD
 NoQWO1RWpNu/BuivuLEKS9q3AoxenGwiqowxGhdVmI3Oc9jGWcEYlduR00VDYPVp
 /RCfwtTY5NyC++h5cnbz8aLJ1hBXG5m79CXfprV+zPWeiLPCaMT6w9Y5QUS2wqA+
 EZ734NknDJOjaHc4cGdZ
 =Z9bb
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Enable THREAD_INFO_IN_TASK to move thread_info off the stack.

   - A big series from Christoph reworking our DMA code to use more of
     the generic infrastructure, as he said:
       "This series switches the powerpc port to use the generic swiotlb
        and noncoherent dma ops, and to use more generic code for the
        coherent direct mapping, as well as removing a lot of dead
        code."

   - Increase our vmalloc space to 512T with the Hash MMU on modern
     CPUs, allowing us to support machines with larger amounts of total
     RAM or distance between nodes.

   - Two series from Christophe, one to optimise TLB miss handlers on
     6xx, and another to optimise the way STRICT_KERNEL_RWX is
     implemented on some 32-bit CPUs.

   - Support for KCOV coverage instrumentation which means we can run
     syzkaller and discover even more bugs in our code.

  And as always many clean-ups, reworks and minor fixes etc.

  Thanks to: Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea
  Arcangeli, Andrew Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir
  Singh, Brajeswar Ghosh, Breno Leitao, Christian Lamparter, Christian
  Zigotzky, Christophe Leroy, Christoph Hellwig, Corentin Labbe, Daniel
  Axtens, David Gibson, Diana Craciun, Firoz Khan, Gustavo A. R. Silva,
  Igor Stoppa, Joe Lawrence, Joel Stanley, Jonathan Neuschäfer, Jordan
  Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark
  Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce, Meelis
  Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot,
  Nicholas Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran,
  Paul Mackerras, Peter Xu, PrasannaKumar Muralidharan, Qian Cai,
  Rashmica Gupta, Reza Arbab, Robert P. J. Day, Russell Currey,
  Sabyasachi Gupta, Sam Bobroff, Sandipan Das, Sergey Senozhatsky,
  Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav Jain,
  YueHaibing"

* tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
  powerpc/32: Clear on-stack exception marker upon exception return
  powerpc: Remove export of save_stack_trace_tsk_reliable()
  powerpc/mm: fix "section_base" set but not used
  powerpc/mm: Fix "sz" set but not used warning
  powerpc/mm: Check secondary hash page table
  powerpc: remove nargs from __SYSCALL
  powerpc/64s: Fix unrelocated interrupt trampoline address test
  powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables
  powerpc/fsl: Fix the flush of branch predictor.
  powerpc/powernv: Make opal log only readable by root
  powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc
  powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C
  powerpc/64s: Fix data interrupts vs d-side MCE reentrancy
  powerpc/64s: Prepare to handle data interrupts vs d-side MCE reentrancy
  powerpc/64s: system reset interrupt preserve HSRRs
  powerpc/64s: Fix HV NMI vs HV interrupt recoverability test
  powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search
  powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback
  selftests/powerpc: Remove duplicate header
  powerpc sstep: Add support for modsd, modud instructions
  ...
2019-03-07 12:56:26 -08:00
Linus Torvalds
ae5906ceee Merge branch 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:

 - Extend LSM stacking to allow sharing of cred, file, ipc, inode, and
   task blobs. This paves the way for more full-featured LSMs to be
   merged, and is specifically aimed at LandLock and SARA LSMs. This
   work is from Casey and Kees.

 - There's a new LSM from Micah Morton: "SafeSetID gates the setid
   family of syscalls to restrict UID/GID transitions from a given
   UID/GID to only those approved by a system-wide whitelist." This
   feature is currently shipping in ChromeOS.

* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (62 commits)
  keys: fix missing __user in KEYCTL_PKEY_QUERY
  LSM: Update list of SECURITYFS users in Kconfig
  LSM: Ignore "security=" when "lsm=" is specified
  LSM: Update function documentation for cap_capable
  security: mark expected switch fall-throughs and add a missing break
  tomoyo: Bump version.
  LSM: fix return value check in safesetid_init_securityfs()
  LSM: SafeSetID: add selftest
  LSM: SafeSetID: remove unused include
  LSM: SafeSetID: 'depend' on CONFIG_SECURITY
  LSM: Add 'name' field for SafeSetID in DEFINE_LSM
  LSM: add SafeSetID module that gates setid calls
  LSM: add SafeSetID module that gates setid calls
  tomoyo: Allow multiple use_group lines.
  tomoyo: Coding style fix.
  tomoyo: Swicth from cred->security to task_struct->security.
  security: keys: annotate implicit fall throughs
  security: keys: annotate implicit fall throughs
  security: keys: annotate implicit fall through
  capabilities:: annotate implicit fall through
  ...
2019-03-07 11:44:01 -08:00
Daniel Borkmann
20182390c4 bpf: fix replace_map_fd_with_map_ptr's ldimm64 second imm field
Non-zero imm value in the second part of the ldimm64 instruction for
BPF_PSEUDO_MAP_FD is invalid, and thus must be rejected. The map fd
only ever sits in the first instructions' imm field. None of the BPF
loaders known to us are using it, so risk of regression is minimal.
For clarity and consistency, the few insn->{src_reg,imm} occurrences
are rewritten into insn[0].{src_reg,imm}. Add a test case to the BPF
selftest suite as well.

Fixes: 0246e64d9a ("bpf: handle pseudo BPF_LD_IMM64 insn")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-07 08:47:13 -08:00
Stanislav Fomichev
69b09175d6 selftests: bpf: test_progs: initialize duration in singal_pending test
CHECK macro implicitly uses duration. We call CHECK() a couple of times
before duration is initialized from bpf_prog_test_run().
Explicitly set duration to 0 to avoid compiler warnings.

Fixes: 740f8a6572 ("selftests/bpf: make sure signal interrupts BPF_PROG_TEST_RUN")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-07 10:46:25 +01:00
Stanislav Fomichev
e78e00bd47 selftests: bpf: fix compilation with out-of-tree $(OUTPUT)
A bunch of related changes lumped together:
* Create prog_tests and verifier output directories; these don't exist with
  out-of-tree $(OUTPUT)
* Add missing -I (via separate TEST_{PROGS,VERIFIER}_CFLAGS) for the main tree
  ($(PWD) != $(OUTPUT) for out-of-tree)
* Add libbpf.a dependency for test_progs_32 (parallel make fails otherwise)
* Add missing "; \" after "cd" when generating test.h headers

Tested by:
$ alias m="make -s -j$(nproc)"
$ m -C tools/testing/selftests/bpf/ clean
$ m -C tools/lib/bpf/ clean
$ rm -rf xxx; mkdir xxx; m -C tools/testing/selftests/bpf/ OUTPUT=$PWD/xxx
$ m -C tools/testing/selftests/bpf/

Fixes: 3f30658830 ("selftests: bpf: break up test_progs - preparations")
Fixes: 2dfb40121e ("selftests: bpf: prepare for break up of verifier tests")
Fixes: 3ef84346c5 ("selftests: bpf: makefile support sub-register code-gen test mode")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-07 10:44:32 +01:00
Peter Oskolkov
17a90a7884 selftests/bpf: test that GSO works in lwt_ip_encap
Add a test on egress that a large TCP packet successfully goes through
the lwt+bpf encap tunnel.

Although there is no direct evidence that GSO worked, as opposed to
e.g. TCP segmentation or IP fragmentation (maybe a kernel stats counter
should be added to track the number of failed GSO attempts?), without
the previous patch in the patchset this test fails, and printk-debugging
showed that software-based GSO succeeded here (veth is not compatible with
SKB_GSO_DODGY, so GSO happens in the software stack).

Also removed an unnecessary nodad and added a missed failed flag.

Signed-off-by: Peter Oskolkov <posk@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-07 10:41:40 +01:00
Linus Torvalds
e431f2d74e Driver core patches for 5.1-rc1
Here is the big driver core patchset for 5.1-rc1
 
 More patches than "normal" here this merge window, due to some work in
 the driver core by Alexander Duyck to rework the async probe
 functionality to work better for a number of devices, and independant
 work from Rafael for the device link functionality to make it work
 "correctly".
 
 Also in here is:
 	- lots of BUS_ATTR() removals, the macro is about to go away
 	- firmware test fixups
 	- ihex fixups and simplification
 	- component additions (also includes i915 patches)
 	- lots of minor coding style fixups and cleanups.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+euQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynyTgCfbV8CLums843sBnT8NnWrTMTdTCcAn1K4re0m
 ep8g+6oRLxJy414hogxQ
 =bLs2
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the big driver core patchset for 5.1-rc1

  More patches than "normal" here this merge window, due to some work in
  the driver core by Alexander Duyck to rework the async probe
  functionality to work better for a number of devices, and independant
  work from Rafael for the device link functionality to make it work
  "correctly".

  Also in here is:

   - lots of BUS_ATTR() removals, the macro is about to go away

   - firmware test fixups

   - ihex fixups and simplification

   - component additions (also includes i915 patches)

   - lots of minor coding style fixups and cleanups.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits)
  driver core: platform: remove misleading err_alloc label
  platform: set of_node in platform_device_register_full()
  firmware: hardcode the debug message for -ENOENT
  driver core: Add missing description of new struct device_link field
  driver core: Fix PM-runtime for links added during consumer probe
  drivers/component: kerneldoc polish
  async: Add cmdline option to specify drivers to be async probed
  driver core: Fix possible supplier PM-usage counter imbalance
  PM-runtime: Fix __pm_runtime_set_status() race with runtime resume
  driver: platform: Support parsing GpioInt 0 in platform_get_irq()
  selftests: firmware: fix verify_reqs() return value
  Revert "selftests: firmware: remove use of non-standard diff -Z option"
  Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config"
  device: Fix comment for driver_data in struct device
  kernfs: Allocating memory for kernfs_iattrs with kmem_cache.
  sysfs: remove unused include of kernfs-internal.h
  driver core: Postpone DMA tear-down until after devres release
  driver core: Document limitation related to DL_FLAG_RPM_ACTIVE
  PM-runtime: Take suppliers into account in __pm_runtime_set_status()
  device.h: Add __cold to dev_<level> logging functions
  ...
2019-03-06 14:52:48 -08:00
Linus Torvalds
8dcd175bc3 Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:

 - a few misc things

 - ocfs2 updates

 - most of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (159 commits)
  tools/testing/selftests/proc/proc-self-syscall.c: remove duplicate include
  proc: more robust bulk read test
  proc: test /proc/*/maps, smaps, smaps_rollup, statm
  proc: use seq_puts() everywhere
  proc: read kernel cpu stat pointer once
  proc: remove unused argument in proc_pid_lookup()
  fs/proc/thread_self.c: code cleanup for proc_setup_thread_self()
  fs/proc/self.c: code cleanup for proc_setup_self()
  proc: return exit code 4 for skipped tests
  mm,mremap: bail out earlier in mremap_to under map pressure
  mm/sparse: fix a bad comparison
  mm/memory.c: do_fault: avoid usage of stale vm_area_struct
  writeback: fix inode cgroup switching comment
  mm/huge_memory.c: fix "orig_pud" set but not used
  mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC
  mm/memcontrol.c: fix bad line in comment
  mm/cma.c: cma_declare_contiguous: correct err handling
  mm/page_ext.c: fix an imbalance with kmemleak
  mm/compaction: pass pgdat to too_many_isolated() instead of zone
  mm: remove zone_lru_lock() function, access ->lru_lock directly
  ...
2019-03-06 10:31:36 -08:00
Souptick Joarder
fff04900ea tools/testing/selftests/proc/proc-self-syscall.c: remove duplicate include
Remove duplicate header which is included twice.

Link: http://lkml.kernel.org/r/20190304182719.GA6606@jordon-HP-15-Notebook-PC
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:22 -08:00
Alexey Dobriyan
332e0e804d proc: more robust bulk read test
/proc may not be mounted and test will exit successfully.

Ensure proc is mounted at /proc.

Link: http://lkml.kernel.org/r/20190209105613.GA10384@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:22 -08:00
Alexey Dobriyan
e483b02087 proc: test /proc/*/maps, smaps, smaps_rollup, statm
Start testing VM related fiels found in per-process files.

Do it by jiting small executable which brings its address space to
precisely known state, then comparing /proc/*/maps, smaps, smaps_rollup,
and statm files to expected values.

Currently only x86_64 is supported.

[adobriyan@gmail.com: exit correctly in /proc/*/maps test]
  Link: http://lkml.kernel.org/r/20190206073659.GB15311@avx2
Link: http://lkml.kernel.org/r/20190203165806.GA14568@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:22 -08:00
Alexey Dobriyan
0338c83836 proc: return exit code 4 for skipped tests
Test harness uses 4 for SKIP, not 2.

Link: http://lkml.kernel.org/r/20190108193108.GA12259@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:21 -08:00
Alexey Dobriyan
a33228682c tmpfs: test link accounting with O_TMPFILE
Mount tmpfs with "nr_inodes=3" for easy check.

Link: http://lkml.kernel.org/r/20190219215016.GA20084@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matej Kupljen <matej.kupljen@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:20 -08:00
Joel Fernandes (Google)
544029862c selftests/memfd: add tests for F_SEAL_FUTURE_WRITE seal
Add tests to verify sealing memfds with the F_SEAL_FUTURE_WRITE works as
expected.

Link: http://lkml.kernel.org/r/20190112203816.85534-3-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Shuah Khan <shuah@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Marc-Andr Lureau <marcandre.lureau@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:19 -08:00
Uladzislau Rezki (Sony)
a05ef00c97 selftests/vm: add script helper for CONFIG_TEST_VMALLOC_MODULE
Add the test script for the kernel test driver to analyse vmalloc
allocator for benchmarking and stressing purposes.  It is just a kernel
module loader.  You can specify and pass different parameters in order
to investigate allocations behaviour.  See "usage" output for more
details.

Also add basic vmalloc smoke test to the "run_vmtests" suite.

Link: http://lkml.kernel.org/r/20190103142108.20744-4-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Shuah Khan <shuah@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:15 -08:00
Linus Torvalds
3717f613f4 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The main RCU related changes in this cycle were:

   - Additional cleanups after RCU flavor consolidation

   - Grace-period forward-progress cleanups and improvements

   - Documentation updates

   - Miscellaneous fixes

   - spin_is_locked() conversions to lockdep

   - SPDX changes to RCU source and header files

   - SRCU updates

   - Torture-test updates, including nolibc updates and moving nolibc to
     tools/include"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
  locking/locktorture: Convert to SPDX license identifier
  linux/torture: Convert to SPDX license identifier
  torture: Convert to SPDX license identifier
  linux/srcu: Convert to SPDX license identifier
  linux/rcutree: Convert to SPDX license identifier
  linux/rcutiny: Convert to SPDX license identifier
  linux/rcu_sync: Convert to SPDX license identifier
  linux/rcu_segcblist: Convert to SPDX license identifier
  linux/rcupdate: Convert to SPDX license identifier
  linux/rcu_node_tree: Convert to SPDX license identifier
  rcu/update: Convert to SPDX license identifier
  rcu/tree: Convert to SPDX license identifier
  rcu/tiny: Convert to SPDX license identifier
  rcu/sync: Convert to SPDX license identifier
  rcu/srcu: Convert to SPDX license identifier
  rcu/rcutorture: Convert to SPDX license identifier
  rcu/rcu_segcblist: Convert to SPDX license identifier
  rcu/rcuperf: Convert to SPDX license identifier
  rcu/rcu.h: Convert to SPDX license identifier
  RCU/torture.txt: Remove section MODULE PARAMETERS
  ...
2019-03-05 14:49:11 -08:00
Christian Brauner
575a0ae974
selftests: add tests for pidfd_send_signal()
As suggested by Andrew Morton in [1] add selftests for the new
sys_pidfd_send_signal() syscall:

/* test_pidfd_send_signal_syscall_support */
Test whether the pidfd_send_signal() syscall is supported and the tests can
be run or need to be skipped.

/* test_pidfd_send_signal_simple_success */
Test whether sending a signal via a pidfd works.

/* test_pidfd_send_signal_exited_fail */
Verify that sending a signal to an already exited process fails with ESRCH.

/* test_pidfd_send_signal_recycled_pid_fail */
Verify that a recycled pid cannot be signaled via a pidfd referring to an
already exited process that had the same pid (cf. [2], [3]).

[1]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/
[2]: https://lore.kernel.org/lkml/20181230210245.GA30252@mail.hallyn.com/
[3]: https://lore.kernel.org/lkml/20181230232711.7aayb7vnhogbv4co@brauner.io/

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Serge Hallyn <serge@hallyn.com>
2019-03-05 17:04:33 +01:00
Souptick Joarder
9e9322e5d2 selftest/net: Remove duplicate header
Remove duplicate header which is included twice.

Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04 11:35:51 -08:00
David S. Miller
f7fb7c1a1c Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2019-03-04

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add AF_XDP support to libbpf. Rationale is to facilitate writing
   AF_XDP applications by offering higher-level APIs that hide many
   of the details of the AF_XDP uapi. Sample programs are converted
   over to this new interface as well, from Magnus.

2) Introduce a new cant_sleep() macro for annotation of functions
   that cannot sleep and use it in BPF_PROG_RUN() to assert that
   BPF programs run under preemption disabled context, from Peter.

3) Introduce per BPF prog stats in order to monitor the usage
   of BPF; this is controlled by kernel.bpf_stats_enabled sysctl
   knob where monitoring tools can make use of this to efficiently
   determine the average cost of programs, from Alexei.

4) Split up BPF selftest's test_progs similarly as we already
   did with test_verifier. This allows to further reduce merge
   conflicts in future and to get more structure into our
   quickly growing BPF selftest suite, from Stanislav.

5) Fix a bug in BTF's dedup algorithm which can cause an infinite
   loop in some circumstances; also various BPF doc fixes and
   improvements, from Andrii.

6) Various BPF sample cleanups and migration to libbpf in order
   to further isolate the old sample loader code (so we can get
   rid of it at some point), from Jakub.

7) Add a new BPF helper for BPF cgroup skb progs that allows
   to set ECN CE code point and a Host Bandwidth Manager (HBM)
   sample program for limiting the bandwidth used by v2 cgroups,
   from Lawrence.

8) Enable write access to skb->queue_mapping from tc BPF egress
   programs in order to let BPF pick TX queue, from Jesper.

9) Fix a bug in BPF spinlock handling for map-in-map which did
   not propagate spin_lock_off to the meta map, from Yonghong.

10) Fix a bug in the new per-CPU BPF prog counters to properly
    initialize stats for each CPU, from Eric.

11) Add various BPF helper prototypes to selftest's bpf_helpers.h,
    from Willem.

12) Fix various BPF samples bugs in XDP and tracing progs,
    from Toke, Daniel and Yonghong.

13) Silence preemption splat in test_bpf after BPF_PROG_RUN()
    enforces it now everywhere, from Anders.

14) Fix a signedness bug in libbpf's btf_dedup_ref_type() to
    get error handling working, from Dan.

15) Fix bpftool documentation and auto-completion with regards
    to stream_{verdict,parser} attach types, from Alban.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04 10:14:31 -08:00
Daniel Borkmann
87dab7c3d5 bpf: add test cases for non-pointer sanitiation logic
Add two additional tests for further asserting the
BPF_ALU_NON_POINTER logic with cases that were missed
previously.

Cc: Marek Majkowski <marek@cloudflare.com>
Cc: Arthur Fabre <afabre@cloudflare.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-04 10:54:20 +01:00
David S. Miller
4e7df119d9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for net-next:

1) Add .release_ops to properly unroll .select_ops, use it from nft_compat.
   After this change, we can remove list of extensions too to simplify this
   codebase.

2) Update amanda conntrack helper to support v3.4, from Florian Tham.

3) Get rid of the obsolete BUGPRINT macro in ebtables, from
   Florian Westphal.

4) Merge IPv4 and IPv6 masquerading infrastructure into one single module.
   From Florian Westphal.

5) Patchset to remove nf_nat_l3proto structure to get rid of
   indirections, from Florian Westphal.

6) Skip unnecessary conntrack timeout updates in case the value is
   still the same, also from Florian Westphal.

7) Remove unnecessary 'fall through' comments in empty switch cases,
   from Li RongQing.

8) Fix lookup to fixed size hashtable sets on big endian with 32-bit keys.

9) Incorrect logic to deactivate path of fixed size hashtable sets,
   element was being tested to self.

10) Remove nft_hash_key(), the bitmap set is always selected for 16-bit
    keys.

11) Use boolean whenever possible in IPVS codebase, from Andrea Claudi.

12) Enter close state in conntrack if RST matches exact sequence number,
    from Florian Westphal.

13) Initialize dst_cache in tunnel extension, from wenxu.

14) Pass protocol as u16 to xt_check_match and xt_check_target, from
    Li RongQing.

15) SCTP header is granted to be in a linear area from IPVS NAT handler,
    from Xin Long.

16) Don't steal packets coming from slave VRF device from the
    ip_sabotage_in() path, from David Ahern.

17) Fix unsafe update of basechain stats, from Li RongQing.

18) Make sure CONNTRACK_LOCKS is power of 2 to let compiler optimize
    modulo operation as bitwise AND, from Li RongQing.

19) Use device_attribute instead of internal definition in the IDLETIMER
    target, from Sami Tolvanen.

20) Merge redir, masq and IPv4/IPv6 NAT chain types, from Florian Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-02 14:01:04 -08:00
David S. Miller
9eb359140c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-03-02 12:54:35 -08:00
Stanislav Fomichev
886225bb08 selftests: bpf: break up test_progs - misc
Move the rest of prog tests into separate files.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02 11:10:40 -08:00
Stanislav Fomichev
271a6337cb selftests: bpf: break up test_progs - spinlock
Move spinlock prog tests into separate files.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02 11:10:40 -08:00
Stanislav Fomichev
20cb14ff9c selftests: bpf: break up test_progs - tracepoint
Move tracepoint prog tests into separate files.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02 11:10:40 -08:00
Stanislav Fomichev
615741d81d selftests: bpf: break up test_progs - stackmap
Move stackmap prog tests into separate files.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02 11:10:40 -08:00
Stanislav Fomichev
eaf90740f5 selftests: bpf: break up test_progs - xdp
Move xdp prog tests into separate files.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02 11:10:40 -08:00
Stanislav Fomichev
7395724b40 selftests: bpf: break up test_progs - pkt access
Move pkt access prog tests into separate files.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02 11:10:40 -08:00
Stanislav Fomichev
3f30658830 selftests: bpf: break up test_progs - preparations
Add new prog_tests directory where tests are supposed to land.
Each prog_tests/<filename>.c is expected to have a global function
with signature 'void test_<filename>(void)'. Makefile automatically
generates prog_tests/tests.h file with entry for each prog_tests file:

	#ifdef DECLARE
	extern void test_<filename>(void);
	...
	#endif

	#ifdef CALL
	test_<filename>();
	...
	#endif

prog_tests/tests.h is included in test_progs.c in two places with
appropriate defines. This scheme allows us to move each function with
a separate patch without breaking anything.

Compared to the recent verifier split, each separate file here is
a compilation unit and test_progs.[ch] is now used as a place to put
some common routines that might be used by multiple tests.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02 11:10:40 -08:00
brakmo
5cce85c640 bpf: sync bpf.h to tools and update bpf_helpers.h
This patch syncs the uapi bpf.h to tools/ and also updates
bpf_herlpers.h in tools/

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02 10:48:27 -08:00
Lucas Bates
255c1c7279 tc-testing: Allow test cases to be skipped
By adding a check for an optional key/value pair to the test case
data, individual test cases may be skipped to prevent tdc from
aborting a test run due to setup or teardown failure.

If a test case is skipped, it will still appear in the results
output to allow for a consistent number of executed tests in each
run. However, the test will be marked as skipped.

This support for skipping extends to any plugins that may generate
additional results for each executed test.

Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01 23:05:06 -08:00
Yonghong Song
a83de90658 selftests/bpf: set unlimited RLIMIT_MEMLOCK for test_sock_fields
This is to avoid permission denied error. A lot of systems
may have a much lower number, e.g., 64KB, for RLIMIT_MEMLOCK,
which may not be sufficient for the test to run successfully.

Fixes: e0b27b3f97 ("bpf: Add test_sock_fields for skb->sk and bpf_tcp_sock")
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02 01:06:23 +01:00
Paolo Abeni
ada641ff6e selftests: fixes for UDP GRO
The current implementation for UDP GRO tests is racy: the receiver
may flush the RX queue while the sending is still transmitting and
incorrectly report RX errors, with a wrong number of packet received.

Add explicit timeouts to the receiver for both connection activation
(first packet received for UDP) and reception completion, so that
in the above critical scenario the receiver will wait for the
transfer completion.

Fixes: 3327a9c463 ("selftests: add functionals test for UDP GRO")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01 11:24:00 -08:00
Andrii Nakryiko
7c7a4890c8 selftests/bpf: add btf_dedup test of FWD/STRUCT resolution
This patch adds a btf_dedup test exercising logic of STRUCT<->FWD
resolution and validating that STRUCT is not resolved to a FWD. It also
forces hash collisions, forcing both FWD and STRUCT to be candidates for
each other. Previously this condition caused infinite loop due to FWD
pointing to STRUCT and STRUCT pointing to its FWD.

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01 01:31:48 +01:00
Andrii Nakryiko
8054d51f76 selftests/bpf: fix btf_dedup testing code
btf_dedup testing code doesn't account for length of struct btf_header
when calculating the start of a string section. This patch fixes this
problem.

Fixes: 49b57e0d01 ("tools/bpf: remove btf__get_strings() superseded by raw data API")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01 01:31:47 +01:00
Jakub Kicinski
f74a53d9a5 tools: libbpf: add a correctly named define for map iteration
For historical reasons the helper to loop over maps in an object
is called bpf_map__for_each while it really should be called
bpf_object__for_each_map.  Rename and add a correctly named
define for backward compatibility.

Switch all in-tree users to the correct name (Quentin).

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01 00:53:45 +01:00
Stanislav Fomichev
ebace0e981 selftests/bpf: use __bpf_constant_htons in test_prog.c for flow dissector
Older GCC (<4.8) isn't smart enough to optimize !__builtin_constant_p()
branch in bpf_htons.

I recently fixed it for pkt_v4 and pkt_v6 in commit a0517a0f7e
("selftests/bpf: use __bpf_constant_htons in test_prog.c"), but
later added another bunch of bpf_htons in commit bf0f0fd939
("selftests/bpf: add simple BPF_PROG_TEST_RUN examples for flow
dissector").

Fixes: bf0f0fd939 ("selftests/bpf: add simple BPF_PROG_TEST_RUN examples for flow dissector")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01 00:48:51 +01:00
Willem de Bruijn
f2bb53887e bpf: add missing entries to bpf_helpers.h
This header defines the BPF functions enumerated in uapi/linux.bpf.h
in a callable format. Expand to include all registered functions.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01 00:46:55 +01:00
David Ahern
be9cefe796 selftests: rtnetlink: use internal netns switch for ip commands
'ip' can switch network namespaces internally and then run a given
command relative to that namespace without the need to fork and exec
another ip instance. Update all references of the form:
    ip netns exec "$testns" ip ...
to
    ip -netns "$testns" ...

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28 13:02:43 -08:00
Paolo Abeni
b3cc4f8a8a selftests: pmtu: add explicit tests for PMTU exceptions cleanup
Add a couple of new tests, explicitly checking that the kernel
timely releases PMTU exceptions on related device removal.
This is mostly a regression test vs the issue fixed by
commit f5b51fe804 ("ipv6: route: purge exception on removal")

Only 2 new test cases have been added, instead of extending all
the existing ones, because the reproducer requires executing
several commands and would slow down too much the tests otherwise.

v2 -> v3:
 - more cleanup, still from Stefano

v1 -> v2:
 - several script cleanups, as suggested by Stefano

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27 21:28:59 -08:00
Paolo Abeni
651eb32e56 selftests: pmtu: disable DAD in all namespaces
Otherwise, the configured IPv6 address could be still "tentative"
at test time, possibly causing tests failures.
We can also drop some sleep along the code and decrease the
timeout for most commands so that the test runtime decreases.

v1 -> v2:
 - fix comment (Stefano)

Fixes: d1f1b9cbf3 ("selftests: net: Introduce first PMTU test")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27 21:28:59 -08:00
Yonghong Song
9eca508375 tools/bpf: selftests: add map lookup to test_map_in_map bpf prog
The bpf_map_lookup_elem is added in the bpf program.
Without previous patch, the test change will trigger the
following error:
  $ ./test_maps
  ...
  ; value_p = bpf_map_lookup_elem(map, &key);
  20: (bf) r1 = r7
  21: (bf) r2 = r8
  22: (85) call bpf_map_lookup_elem#1
  ; if (!value_p || *value_p != 123)
  23: (15) if r0 == 0x0 goto pc+16
   R0=map_value(id=2,off=0,ks=4,vs=4,imm=0) R6=inv1 R7=map_ptr(id=0,off=0,ks=4,vs=4,imm=0)
   R8=fp-8,call_-1 R10=fp0,call_-1 fp-8=mmmmmmmm
  ; if (!value_p || *value_p != 123)
  24: (61) r1 = *(u32 *)(r0 +0)
   R0=map_value(id=2,off=0,ks=4,vs=4,imm=0) R6=inv1 R7=map_ptr(id=0,off=0,ks=4,vs=4,imm=0)
   R8=fp-8,call_-1 R10=fp0,call_-1 fp-8=mmmmmmmm
  bpf_spin_lock cannot be accessed directly by load/store

With the kernel fix in the previous commit, the error goes away.

Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-02-27 17:03:13 -08:00
Florian Westphal
3bf195ae60 netfilter: nat: merge nf_nat_ipv4,6 into nat core
before:
   text    data     bss     dec     hex filename
  16566    1576    4136   22278    5706 nf_nat.ko
   3598	    844	      0	   4442	   115a	nf_nat_ipv6.ko
   3187	    844	      0	   4031	    fbf	nf_nat_ipv4.ko

after:
   text    data     bss     dec     hex filename
  22948    1612    4136   28696    7018 nf_nat.ko

... with ipv4/v6 nat now provided directly via nf_nat.ko.

Also changes:
       ret = nf_nat_ipv4_fn(priv, skb, state);
       if (ret != NF_DROP && ret != NF_STOLEN &&
into
	if (ret != NF_ACCEPT)
		return ret;

everywhere.

The nat hooks never should return anything other than
ACCEPT or DROP (and the latter only in rare error cases).

The original code uses multi-line ANDing including assignment-in-if:
        if (ret != NF_DROP && ret != NF_STOLEN &&
           !(IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED) &&
            (ct = nf_ct_get(skb, &ctinfo)) != NULL) {

I removed this while moving, breaking those in separate conditionals
and moving the assignments into extra lines.

checkpatch still generates some warnings:
 1. Overly long lines (of moved code).
    Breaking them is even more ugly. so I kept this as-is.
 2. use of extern function declarations in a .c file.
    This is necessary evil, we must call
    nf_nat_l3proto_register() from the nat core now.
    All l3proto related functions are removed later in this series,
    those prototypes are then removed as well.

v2: keep empty nf_nat_ipv6_csum_update stub for CONFIG_IPV6=n case.
v3: remove IS_ENABLED(NF_NAT_IPV4/6) tests, NF_NAT_IPVx toggles
    are removed here.
v4: also get rid of the assignments in conditionals.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-27 10:49:55 +01:00