Commit Graph

768266 Commits

Author SHA1 Message Date
Sergei Shtylyov
925652d035 PCI: xgene: Fix I/O space page leak
When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty 
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.

The X-Gene PCI controller driver has the same issue.
Replace pci_remap_iospace() with the devm_ managed version so that the
pages get unmapped automagically on any probe failure.

Fixes: 5f6b6ccdbe ("PCI: xgene: Add APM X-Gene PCIe driver")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-18 16:59:40 -05:00
David S. Miller
9640ccce30 Here are some batman-adv fixes:
- Fix gateway refcounting in BATMAN IV and V, by Sven Eckelmann (2 patches)
 
  - Fix debugfs paths when renaming interfaces, by Sven Eckelmann (2 patches)
 
  - Fix TT flag issues, by Linus Luessing (2 patches)
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAltOCLUWHHN3QHNpbW9u
 d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoepaEACownlLt7HYluTol+tSrfg/og1d
 pS+exIjkVhRmmWzgNV27tpKGxG5N/kXKYBqGZN/f55EbT4TTZ7czD7j5rouQ9v3L
 ACFtALExU1DRpquC7iQ3M2LvATVYoX1eiUMbQ7+bjWBntxMFtqa8AoXREg5sIWj0
 5VE10pnLpT2YJfndawWgGuyg7bPVm5l9GDgi5o5OFmCN7EpPxX+M5SRQ3uB06Wz8
 6mZlE6IryRDncDPEwg279s+ESIP0e9tiVOOkY8POTYiEf6549ApO9QP3X5qFv1Eb
 UrNAxbaGQrH+WzKmH5euJudUYSucwjCCWI0Wv7EaOQ7Gm8T7tJJUyurauGm80FhD
 are/MgC/78QqVWY1YAUN+bv/ORzjtxTsvFOssTJCBN6j5NzoZA4pU3rLmDKki/6x
 MCDM1EZfhLIDPku1WML2KMYwLFDadZXdBOSee7QSk+bq11ktCCaG8EYul10La+V0
 B5z/rDzzkK4eaCaGfZH76/pvkfaRsRugPnldTRok1KD8fL/lmYYLiuHwC+EzMBSd
 y/W2f3QblfiTe+B8DNnN4nNrTSyx7VP38bsphb1DiviMEpAUs96qurq3yrf8Xky2
 tW0Nx8VcRhKbRfunXie+dsHSGVHR3b6jIwq8RomUtH8qdB1wcVaC4wLo00LbGVx9
 hk+MMcMU06gcmLPQEA==
 =7JnI
 -----END PGP SIGNATURE-----

Merge tag 'batadv-net-for-davem-20180717' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
Here are some batman-adv fixes:

 - Fix gateway refcounting in BATMAN IV and V, by Sven Eckelmann (2 patches)

 - Fix debugfs paths when renaming interfaces, by Sven Eckelmann (2 patches)

 - Fix TT flag issues, by Linus Luessing (2 patches)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18 13:50:12 -07:00
YueHaibing
5318918390 net: sched: Using NULL instead of plain integer
Fixes the following sparse warnings:

net/sched/cls_api.c:1101:43: warning: Using plain integer as NULL pointer
net/sched/cls_api.c:1492:75: warning: Using plain integer as NULL pointer

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18 13:44:07 -07:00
Alexander Couzens
5c968f4802 net: usb: asix: replace mii_nway_restart in resume path
mii_nway_restart is not pm aware which results in a rtnl deadlock.
Implement mii_nway_restart manual by setting BMCR_ANRESTART if
BMCR_ANENABLE is set.

To reproduce:
* plug an asix based usb network interface
* wait until the device enters PM (~5 sec)
* `ip link set eth1 up` will never return

Fixes: d9fe64e511 ("net: asix: Add in_pm parameter")
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18 13:43:16 -07:00
Sergei Shtylyov
a5fb9fb023 PCI: OF: Fix I/O space page leak
When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty 
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.

Introduce the devm_pci_remap_iospace() managed API and replace the
pci_remap_iospace() call with it to fix the bug.

Fixes: dbf9826d57 ("PCI: generic: Convert to DT resource parsing API")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: split commit/updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-18 15:40:26 -05:00
Gustavo A. R. Silva
676bcfece1 net: cxgb3_main: fix potential Spectre v1
t.qset_idx can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:2286 cxgb_extension_ioctl()
warn: potential spectre issue 'adapter->msix_info'

Fix this by sanitizing t.qset_idx before using it to index
adapter->msix_info

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18 13:31:15 -07:00
Davidlohr Bueso
107d01f5ba lib/rhashtable: consider param->min_size when setting initial table size
rhashtable_init() currently does not take into account the user-passed
min_size parameter unless param->nelem_hint is set as well. As such,
the default size (number of buckets) will always be HASH_DEFAULT_SIZE
even if the smallest allowed size is larger than that. Remediate this
by unconditionally calling into rounded_hashtable_size() and handling
things accordingly.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18 13:27:43 -07:00
Gustavo A. R. Silva
0e714d2778 vfio/pci: Fix potential Spectre v1
info.index can be indirectly controlled by user-space, hence leading
to a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/vfio/pci/vfio_pci.c:734 vfio_pci_ioctl()
warn: potential spectre issue 'vdev->region'

Fix this by sanitizing info.index before indirectly using it to index
vdev->region

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-07-18 12:57:25 -06:00
Linus Torvalds
04a1320651 for-4.18-rc5-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAltPMI0ACgkQxWXV+ddt
 WDvmXw//fyV+2hoARngzjd+4o32YHfxdf+Xv4XCnMsZVKOHKkqX8qrmMNyX0sd4w
 5NwUZpv/mZ4LHnm4M+EMGJWjXL/oXkLGrDzndninNC+u7GlFVieZ/aF5D96z6rOm
 p45wGETYvAbZI7XZ3dLebpIDqr+eXOhx3lpJTAKY5sfTIwzwJ+KC5vFYdt+Rz4cr
 cbjwHhRUsRfu1I0SSjUVFIC5frtegIzbDgjWNiLLO44ozbDAH3j1SufOgNLb5GFM
 n+eh0xIHDNLOrH3aVKO19zk9NigVBu96/FJnIz0+Jzs67hifksfZWVDV5vKetUxA
 M46aqtTrSVb/NJ/RHkQkyWiJjZqioXXx+KsZjdU63fyv4iu0+o2HV0uY/Pifm+X/
 fCS7xbQOhWJySQ+6mAjxXB9eo0RqO+RIGGIV9gJWZKt3S3DvAUmvd980jeHUtXRB
 VwMwmnvqvYaGWLWmaTRm1mjdmhCX2JdNN2RMmVN36tGfed0uopIFeax2rtWJ4153
 V+8eZWaLkvvT3iGu+XLUhEfv3UCUy7N1LDk8toe7Xp+qIMvWus3GIsKAUCmJJ3b+
 sGmbYSgn5v8TR65m5QO4/ZWmt4/bi/2Usd6Cq3vd0Op08kTWBTxjdelAVm+dlEYb
 sZLIMrxPg8ogEw8qX4GxROa8/1z9F/62RSmHfk4W7InY2AMJJAg=
 =Ga4m
 -----END PGP SIGNATURE-----

Merge tag 'for-4.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "Three regression fixes. They're few-liners and fixing some corner
  cases missed in the origial patches"

* tag 'for-4.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: scrub: Don't use inode page cache in scrub_handle_errored_block()
  btrfs: fix use-after-free of cmp workspace pages
  btrfs: restore uuid_mutex in btrfs_open_devices
2018-07-18 11:13:25 -07:00
Linus Torvalds
47f7dc4b84 Miscellaneous bugfixes, plus a small patchlet related to Spectre v2.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJbTwvXAAoJEL/70l94x66D068H/0lNKsk33AHZGsVOr3qZJNpE
 6NI746ZXurRNNZ6d64hVIBDfTI4P3lurjQmb9/GUSwvoHW0S2zMug0F59TKYQ3EO
 kcX+b9LRmBkUq2h2R8XXTVkmaZ1SqwvXVVzx80T2cXAD3J3kuX6Yj+z1RO7MrXWI
 ZChA3ZT/eqsGEzle+yu/YExAgbv+7xzuBNBaas7QvJE8CHZzPKYjVBEY6DAWx53L
 LMq8C3NsHpJhXD6Rcq9DIyrktbDSi+xRBbYsJrhSEe0MfzmgBkkysl86uImQWZxk
 /2uHUVz+85IYy3C+ZbagmlSmHm1Civb6VyVNu9K3nRxooVtmmgudsA9VYJRRVx4=
 =M0K/
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "Miscellaneous bugfixes, plus a small patchlet related to Spectre v2"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvmclock: fix TSC calibration for nested guests
  KVM: VMX: Mark VMXArea with revision_id of physical CPU even when eVMCS enabled
  KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumer
  KVM/Eventfd: Avoid crash when assign and deassign specific eventfd in parallel.
  x86/kvmclock: set pvti_cpu0_va after enabling kvmclock
  x86/kvm/Kconfig: Ensure CRYPTO_DEV_CCP_DD state at minimum matches KVM_AMD
  kvm: nVMX: Restore exit qual for VM-entry failure due to MSR loading
  x86/kvm/vmx: don't read current->thread.{fs,gs}base of legacy tasks
  KVM: VMX: support MSR_IA32_ARCH_CAPABILITIES as a feature MSR
2018-07-18 11:08:44 -07:00
David S. Miller
08239d4348 Merge branch 'smc-fixes'
Ursula Braun says:

====================
net/smc: fixes 2018-07-18

here are small fixes for SMC: The first patch speeds up unidirectional
traffic, the second patch increases security, and the third patch
fixes a problem for fallback cases.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18 10:58:27 -07:00
Karsten Graul
f6bdc42f02 net/smc: reset recv timeout after clc handshake
During clc handshake the receive timeout is set to CLC_WAIT_TIME.
Remember and reset the original timeout value after the receive calls,
and remove a duplicate assignment of CLC_WAIT_TIME.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18 10:58:27 -07:00
Ursula Braun
ac0107edba net/smc: add error handling for get_user()
For security reasons the return code of get_user() should always be
checked.

Fixes: 01d2f7e2cd ("net/smc: sockopts TCP_NODELAY and TCP_CORK")
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18 10:58:27 -07:00
Ursula Braun
99be51f11d net/smc: optimize consumer cursor updates
The SMC protocol requires to send a separate consumer cursor update,
if it cannot be piggybacked to updates of the producer cursor.
Currently the decision to send a separate consumer cursor update
just considers the amount of data already received by the socket
program. It does not consider the amount of data already arrived, but
not yet consumed by the receiver. Basing the decision on the
difference between already confirmed and already arrived data
(instead of difference between already confirmed and already consumed
data), may lead to a somewhat earlier consumer cursor update send in
fast unidirectional traffic scenarios, and thus to better throughput.

Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Suggested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18 10:58:27 -07:00
Tetsuo Handa
3bc53be9db net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL.
syzbot is reporting stalls at nfc_llcp_send_ui_frame() [1]. This is
because nfc_llcp_send_ui_frame() is retrying the loop without any delay
when nonblocking nfc_alloc_send_skb() returned NULL.

Since there is no need to use MSG_DONTWAIT if we retry until
sock_alloc_send_pskb() succeeds, let's use blocking call.
Also, in case an unexpected error occurred, let's break the loop
if blocking nfc_alloc_send_skb() failed.

[1] https://syzkaller.appspot.com/bug?id=4a131cc571c3733e0eff6bc673f4e36ae48f19c6

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+d29d18215e477cfbfbdd@syzkaller.appspotmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18 10:51:45 -07:00
Chen-Yu Tsai
384cf4285b Input: i8042 - add Lenovo LaVie Z to the i8042 reset list
The Lenovo LaVie Z laptop requires i8042 to be reset in order to
consistently detect its Elantech touchpad. The nomux and kbdreset
quirks are not sufficient.

It's possible the other LaVie Z models from NEC require this as well.

Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-18 17:25:52 +00:00
Arnd Bergmann
83ed7d1fe2 ipv6: ila: select CONFIG_DST_CACHE
My randconfig builds came across an old missing dependency for ILA:

ERROR: "dst_cache_set_ip6" [net/ipv6/ila/ila.ko] undefined!
ERROR: "dst_cache_get" [net/ipv6/ila/ila.ko] undefined!
ERROR: "dst_cache_init" [net/ipv6/ila/ila.ko] undefined!
ERROR: "dst_cache_destroy" [net/ipv6/ila/ila.ko] undefined!

We almost never run into this by accident because randconfig builds
end up selecting DST_CACHE from some other tunnel protocol, and this
one appears to be the only one missing the explicit 'select'.

>From all I can tell, this problem first appeared in linux-4.9
when dst_cache support got added to ILA.

Fixes: 79ff2fc31e ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18 10:22:37 -07:00
Taehee Yoo
c293ac959f netfilter: nft_set_rbtree: fix panic when destroying set by GC
This patch fixes below.
1. check null pointer of rb_next.
 rb_next can return null. so null check routine should be added.
2. add rcu_barrier in destroy routine.
 GC uses call_rcu to remove elements. but all elements should be
 removed before destroying set and chains. so that rcu_barrier is added.

test script:
   %cat test.nft
   table inet aa {
	   map map1 {
		   type ipv4_addr : verdict; flags interval, timeout;
		   elements = {
			   0-1 : jump a0,
			   3-4 : jump a0,
			   6-7 : jump a0,
			   9-10 : jump a0,
			   12-13 : jump a0,
			   15-16 : jump a0,
			   18-19 : jump a0,
			   21-22 : jump a0,
			   24-25 : jump a0,
			   27-28 : jump a0,
		   }
		   timeout 1s;
	   }
	   chain a0 {
	   }
   }
   flush ruleset
   table inet aa {
	   map map1 {
		   type ipv4_addr : verdict; flags interval, timeout;
		   elements = {
			   0-1 : jump a0,
			   3-4 : jump a0,
			   6-7 : jump a0,
			   9-10 : jump a0,
			   12-13 : jump a0,
			   15-16 : jump a0,
			   18-19 : jump a0,
			   21-22 : jump a0,
			   24-25 : jump a0,
			   27-28 : jump a0,
		   }
		   timeout 1s;
	   }
	   chain a0 {
	   }
   }
   flush ruleset

splat looks like:
[ 2402.419838] kasan: GPF could be caused by NULL-ptr deref or user memory access
[ 2402.428433] general protection fault: 0000 [] SMP DEBUG_PAGEALLOC KASAN PTI
[ 2402.429343] CPU: 1 PID: 1350 Comm: kworker/1:1 Not tainted 4.18.0-rc2+ 
[ 2402.429343] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 03/23/2017
[ 2402.429343] Workqueue: events_power_efficient nft_rbtree_gc [nft_set_rbtree]
[ 2402.429343] RIP: 0010:rb_next+0x1e/0x130
[ 2402.429343] Code: e9 de f2 ff ff 0f 1f 80 00 00 00 00 41 55 48 89 fa 41 54 55 53 48 c1 ea 03 48 b8 00 00 00 0
[ 2402.429343] RSP: 0018:ffff880105f77678 EFLAGS: 00010296
[ 2402.429343] RAX: dffffc0000000000 RBX: ffff8801143e3428 RCX: 1ffff1002287c69c
[ 2402.429343] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000000
[ 2402.429343] RBP: 0000000000000000 R08: ffffed0016aabc24 R09: ffffed0016aabc24
[ 2402.429343] R10: 0000000000000001 R11: ffffed0016aabc23 R12: 0000000000000000
[ 2402.429343] R13: ffff8800b6933388 R14: dffffc0000000000 R15: ffff8801143e3440
[ 2402.534486] kasan: CONFIG_KASAN_INLINE enabled
[ 2402.534212] FS:  0000000000000000(0000) GS:ffff88011b600000(0000) knlGS:0000000000000000
[ 2402.534212] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2402.534212] CR2: 0000000000863008 CR3: 00000000a3c16000 CR4: 00000000001006e0
[ 2402.534212] Call Trace:
[ 2402.534212]  nft_rbtree_gc+0x2b5/0x5f0 [nft_set_rbtree]
[ 2402.534212]  process_one_work+0xc1b/0x1ee0
[ 2402.540329] kasan: GPF could be caused by NULL-ptr deref or user memory access
[ 2402.534212]  ? _raw_spin_unlock_irq+0x29/0x40
[ 2402.534212]  ? pwq_dec_nr_in_flight+0x3e0/0x3e0
[ 2402.534212]  ? set_load_weight+0x270/0x270
[ 2402.534212]  ? __schedule+0x6ea/0x1fb0
[ 2402.534212]  ? __sched_text_start+0x8/0x8
[ 2402.534212]  ? save_trace+0x320/0x320
[ 2402.534212]  ? sched_clock_local+0xe2/0x150
[ 2402.534212]  ? find_held_lock+0x39/0x1c0
[ 2402.534212]  ? worker_thread+0x35f/0x1150
[ 2402.534212]  ? lock_contended+0xe90/0xe90
[ 2402.534212]  ? __lock_acquire+0x4520/0x4520
[ 2402.534212]  ? do_raw_spin_unlock+0xb1/0x350
[ 2402.534212]  ? do_raw_spin_trylock+0x111/0x1b0
[ 2402.534212]  ? do_raw_spin_lock+0x1f0/0x1f0
[ 2402.534212]  worker_thread+0x169/0x1150

Fixes: 8d8540c4f5e0("netfilter: nft_set_rbtree: add timeout support")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-18 17:12:05 +02:00
Taehee Yoo
9970a8e40d netfilter: nft_set_hash: add rcu_barrier() in the nft_rhash_destroy()
GC of set uses call_rcu() to destroy elements.
So that elements would be destroyed after destroying sets and chains.
But, elements should be destroyed before destroying sets and chains.
In order to wait calling call_rcu(), a rcu_barrier() is added.

In order to test correctly, below patch should be applied.
https://patchwork.ozlabs.org/patch/940883/

test scripts:
   %cat test.nft
   table ip aa {
	   map map1 {
		   type ipv4_addr : verdict; flags timeout;
		   elements = {
			   0 : jump a0,
			   1 : jump a0,
			   2 : jump a0,
			   3 : jump a0,
			   4 : jump a0,
			   5 : jump a0,
			   6 : jump a0,
			   7 : jump a0,
			   8 : jump a0,
			   9 : jump a0,
		   }
		   timeout 1s;
	   }
	   chain a0 {
	   }
   }
   flush ruleset

   [ ... ]

   table ip aa {
	   map map1 {
		   type ipv4_addr : verdict; flags timeout;
		   elements = {
			   0 : jump a0,
			   1 : jump a0,
			   2 : jump a0,
			   3 : jump a0,
			   4 : jump a0,
			   5 : jump a0,
			   6 : jump a0,
			   7 : jump a0,
			   8 : jump a0,
			   9 : jump a0,
		   }
		   timeout 1s;
	   }
	   chain a0 {
	   }
   }
   flush ruleset

Splat looks like:
[  200.795603] kernel BUG at net/netfilter/nf_tables_api.c:1363!
[  200.806944] invalid opcode: 0000 [] SMP DEBUG_PAGEALLOC KASAN PTI
[  200.812253] CPU: 1 PID: 1582 Comm: nft Not tainted 4.17.0+ 
[  200.820297] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[  200.830309] RIP: 0010:nf_tables_chain_destroy.isra.34+0x62/0x240 [nf_tables]
[  200.838317] Code: 43 50 85 c0 74 26 48 8b 45 00 48 8b 4d 08 ba 54 05 00 00 48 c7 c6 60 6d 29 c0 48 c7 c7 c0 65 29 c0
4c 8b 40 08 e8 58 e5 fd f8 <0f> 0b 48 89 da 48 b8 00 00 00 00 00 fc ff
[  200.860366] RSP: 0000:ffff880118dbf4d0 EFLAGS: 00010282
[  200.866354] RAX: 0000000000000061 RBX: ffff88010cdeaf08 RCX: 0000000000000000
[  200.874355] RDX: 0000000000000061 RSI: 0000000000000008 RDI: ffffed00231b7e90
[  200.882361] RBP: ffff880118dbf4e8 R08: ffffed002373bcfb R09: ffffed002373bcfa
[  200.890354] R10: 0000000000000000 R11: ffffed002373bcfb R12: dead000000000200
[  200.898356] R13: dead000000000100 R14: ffffffffbb62af38 R15: dffffc0000000000
[  200.906354] FS:  00007fefc31fd700(0000) GS:ffff88011b800000(0000) knlGS:0000000000000000
[  200.915533] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  200.922355] CR2: 0000557f1c8e9128 CR3: 0000000106880000 CR4: 00000000001006e0
[  200.930353] Call Trace:
[  200.932351]  ? nf_tables_commit+0x26f6/0x2c60 [nf_tables]
[  200.939525]  ? nf_tables_setelem_notify.constprop.49+0x1a0/0x1a0 [nf_tables]
[  200.947525]  ? nf_tables_delchain+0x6e0/0x6e0 [nf_tables]
[  200.952383]  ? nft_add_set_elem+0x1700/0x1700 [nf_tables]
[  200.959532]  ? nla_parse+0xab/0x230
[  200.963529]  ? nfnetlink_rcv_batch+0xd06/0x10d0 [nfnetlink]
[  200.968384]  ? nfnetlink_net_init+0x130/0x130 [nfnetlink]
[  200.975525]  ? debug_show_all_locks+0x290/0x290
[  200.980363]  ? debug_show_all_locks+0x290/0x290
[  200.986356]  ? sched_clock_cpu+0x132/0x170
[  200.990352]  ? find_held_lock+0x39/0x1b0
[  200.994355]  ? sched_clock_local+0x10d/0x130
[  200.999531]  ? memset+0x1f/0x40

Fixes: 9d0982927e ("netfilter: nft_hash: add support for timeouts")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-18 17:09:53 +02:00
Vijendar Mukunda
2d95ceb454 drm/amd/amdgpu: creating two I2S instances for stoney/cz (v2)
Creating two I2S instances for Stoney/cz platforms.

v2: squash in:
"drm/amdgpu/acp: Fix slab-out-of-bounds in mfd_add_device in acp_hw_init"
From Daniel Kurtz <djkurtz@chromium.org>.

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-18 09:03:07 -05:00
Alex Deucher
b3fc2ab37e drm/amdgpu: add another ATPX quirk for TOPAZ
Needs ATPX rather than _PR3.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=200517
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2018-07-18 08:48:22 -05:00
Rafael J. Wysocki
95d6c0857e cpufreq: intel_pstate: Register when ACPI PCCH is present
Currently, intel_pstate doesn't register if _PSS is not present on
HP Proliant systems, because it expects the firmware to take over
CPU performance scaling in that case.  However, if ACPI PCCH is
present, the firmware expects the kernel to use it for CPU
performance scaling and the pcc-cpufreq driver is loaded for that.

Unfortunately, the firmware interface used by that driver is not
scalable for fundamental reasons, so pcc-cpufreq is way suboptimal
on systems with more than just a few CPUs.  In fact, it is better to
avoid using it at all.

For this reason, modify intel_pstate to look for ACPI PCCH if _PSS
is not present and register if it is there.  Also prevent the
pcc-cpufreq driver from trying to initialize itself if intel_pstate
has been registered already.

Fixes: fbbcdc0744 (intel_pstate: skip the driver if ACPI has power mgmt option)
Reported-by: Andreas Herrmann <aherrmann@suse.com>
Reviewed-by: Andreas Herrmann <aherrmann@suse.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Andreas Herrmann <aherrmann@suse.com>
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-18 13:38:37 +02:00
Gautham R. Shenoy
b03897cf31 powerpc/powernv: Fix save/restore of SPRG3 on entry/exit from stop (idle)
On 64-bit servers, SPRN_SPRG3 and its userspace read-only mirror
SPRN_USPRG3 are used as userspace VDSO write and read registers
respectively.

SPRN_SPRG3 is lost when we enter stop4 and above, and is currently not
restored.  As a result, any read from SPRN_USPRG3 returns zero on an
exit from stop4 (Power9 only) and above.

Thus in this situation, on POWER9, any call from sched_getcpu() always
returns zero, as on powerpc, we call __kernel_getcpu() which relies
upon SPRN_USPRG3 to report the CPU and NUMA node information.

Fix this by restoring SPRN_SPRG3 on wake up from a deep stop state
with the sprg_vdso value that is cached in PACA.

Fixes: e1c1cfed54 ("powerpc/powernv: Save/Restore additional SPRs for stop4 cpuidle")
Cc: stable@vger.kernel.org # v4.14+
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-18 20:40:17 +10:00
James Clarke
4e4a4b75cc powerpc/Makefile: Assemble with -me500 when building for E500
Some of the assembly files use instructions specific to BookE or E500,
which are rejected with the now-default -mcpu=powerpc, so we must pass
-me500 to the assembler just as we pass -me200 for E200.

Fixes: 4bf4f42a2f ("powerpc/kbuild: Set default generic machine type for 32-bit compile")
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-18 20:34:42 +10:00
Takashi Iwai
f3d737b634 ALSA: hda/realtek - Yet another Clevo P950 quirk entry
The PCI SSID 1558:95e1 needs the same quirk for other Clevo P950
models, too.  Otherwise no sound comes out of speakers.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1101143
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-18 12:17:46 +02:00
Peng Hao
e10f780503 kvmclock: fix TSC calibration for nested guests
Inside a nested guest, access to hardware can be slow enough that
tsc_read_refs always return ULLONG_MAX, causing tsc_refine_calibration_work
to be called periodically and the nested guest to spend a lot of time
reading the ACPI timer.

However, if the TSC frequency is available from the pvclock page,
we can just set X86_FEATURE_TSC_KNOWN_FREQ and avoid the recalibration.
'refine' operation.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
[Commit message rewritten. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-18 11:43:17 +02:00
Liran Alon
2307af1c4b KVM: VMX: Mark VMXArea with revision_id of physical CPU even when eVMCS enabled
When eVMCS is enabled, all VMCS allocated to be used by KVM are marked
with revision_id of KVM_EVMCS_VERSION instead of revision_id reported
by MSR_IA32_VMX_BASIC.

However, even though not explictly documented by TLFS, VMXArea passed
as VMXON argument should still be marked with revision_id reported by
physical CPU.

This issue was found by the following setup:
* L0 = KVM which expose eVMCS to it's L1 guest.
* L1 = KVM which consume eVMCS reported by L0.
This setup caused the following to occur:
1) L1 execute hardware_enable().
2) hardware_enable() calls kvm_cpu_vmxon() to execute VMXON.
3) L0 intercept L1 VMXON and execute handle_vmon() which notes
vmxarea->revision_id != VMCS12_REVISION and therefore fails with
nested_vmx_failInvalid() which sets RFLAGS.CF.
4) L1 kvm_cpu_vmxon() don't check RFLAGS.CF for failure and therefore
hardware_enable() continues as usual.
5) L1 hardware_enable() then calls ept_sync_global() which executes
INVEPT.
6) L0 intercept INVEPT and execute handle_invept() which notes
!vmx->nested.vmxon and thus raise a #UD to L1.
7) Raised #UD caused L1 to panic.

Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Cc: stable@vger.kernel.org
Fixes: 773e8a0425
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-18 11:31:28 +02:00
Paolo Bonzini
9432a31757 KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumer
A comment warning against this bug is there, but the code is not doing what
the comment says.  Therefore it is possible that an EPOLLHUP races against
irq_bypass_register_consumer.  The EPOLLHUP handler schedules irqfd_shutdown,
and if that runs soon enough, you get a use-after-free.

Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
2018-07-18 11:31:27 +02:00
Lan Tianyu
b5020a8e6b KVM/Eventfd: Avoid crash when assign and deassign specific eventfd in parallel.
Syzbot reports crashes in kvm_irqfd_assign(), caused by use-after-free
when kvm_irqfd_assign() and kvm_irqfd_deassign() run in parallel
for one specific eventfd. When the assign path hasn't finished but irqfd
has been added to kvm->irqfds.items list, another thead may deassign the
eventfd and free struct kvm_kernel_irqfd(). The assign path then uses
the struct kvm_kernel_irqfd that has been freed by deassign path. To avoid
such issue, keep irqfd under kvm->irq_srcu protection after the irqfd
has been added to kvm->irqfds.items list, and call synchronize_srcu()
in irq_shutdown() to make sure that irqfd has been fully initialized in
the assign path.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Tianyu Lan <tianyu.lan@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-18 11:31:27 +02:00
Alexey Kardashevskiy
76fa4975f3 KVM: PPC: Check if IOMMU page is contained in the pinned physical page
A VM which has:
 - a DMA capable device passed through to it (eg. network card);
 - running a malicious kernel that ignores H_PUT_TCE failure;
 - capability of using IOMMU pages bigger that physical pages
can create an IOMMU mapping that exposes (for example) 16MB of
the host physical memory to the device when only 64K was allocated to the VM.

The remaining 16MB - 64K will be some other content of host memory, possibly
including pages of the VM, but also pages of host kernel memory, host
programs or other VMs.

The attacking VM does not control the location of the page it can map,
and is only allowed to map as many pages as it has pages of RAM.

We already have a check in drivers/vfio/vfio_iommu_spapr_tce.c that
an IOMMU page is contained in the physical page so the PCI hardware won't
get access to unassigned host memory; however this check is missing in
the KVM fastpath (H_PUT_TCE accelerated code). We were lucky so far and
did not hit this yet as the very first time when the mapping happens
we do not have tbl::it_userspace allocated yet and fall back to
the userspace which in turn calls VFIO IOMMU driver, this fails and
the guest does not retry,

This stores the smallest preregistered page size in the preregistered
region descriptor and changes the mm_iommu_xxx API to check this against
the IOMMU page size.

This calculates maximum page size as a minimum of the natural region
alignment and compound page size. For the page shift this uses the shift
returned by find_linux_pte() which indicates how the page is mapped to
the current userspace - if the page is huge and this is not a zero, then
it is a leaf pte and the page is mapped within the range.

Fixes: 121f80ba68 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-18 16:17:17 +10:00
Alexey Kardashevskiy
1463edca67 vfio/spapr: Use IOMMU pageshift rather than pagesize
The size is always equal to 1 page so let's use this. Later on this will
be used for other checks which use page shifts to check the granularity
of access.

This should cause no behavioral change.

Cc: stable@vger.kernel.org # v4.12+
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-18 16:17:07 +10:00
David Lechner
3a9b045506 net: usb: rtl8150: demote allmulti message to dev_dbg()
This driver can spam the kernel log with multiple messages of:

    net eth0: eth0: allmulti set

Usually 4 or 8 at a time (probably because of using ConnMan).

This message doesn't seem useful, so let's demote it from dev_info()
to dev_dbg().

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18 15:09:39 +09:00
Alexander Sverdlin
4aac0b4347 octeon_mgmt: Fix MIX registers configuration on MTU setup
octeon_mgmt driver doesn't drop RX frames that are 1-4 bytes bigger than
MTU set for the corresponding interface. The problem is in the
AGL_GMX_RX0/1_FRM_MAX register setting, which should not account for VLAN
tagging.

According to Octeon HW manual:
"For tagged frames, MAX increases by four bytes for each VLAN found up to a
maximum of two VLANs, or MAX + 8 bytes."

OCTEON_FRAME_HEADER_LEN "define" is fine for ring buffer management, but
should not be used for AGL_GMX_RX0/1_FRM_MAX.

The problem could be easily reproduced using "ping" command. If affected
system has default MTU 1500, other host (having MTU >= 1504) can
successfully "ping" the affected system with payload size 1473-1476,
resulting in IP packets of size 1501-1504 accepted by the mgmt driver.
Fixed system still accepts IP packets of 1500 bytes even with VLAN tagging,
because the limits are lifted in HW as expected, for every VLAN tag.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18 13:13:07 +09:00
Christoph Hellwig
9ba546c019 aio: don't expose __aio_sigset in uapi
glibc uses a different defintion of sigset_t than the kernel does,
and the current version would pull in both.  To fix this just do not
expose the type at all - this somewhat mirrors pselect() where we
do not even have a type for the magic sigmask argument, but just
use pointer arithmetics.

Fixes: 7a074e96 ("aio: implement io_pgetevents")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Adrian Reber <adrian@lisas.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-17 23:26:58 -04:00
Theodore Ts'o
81e69df38e random: mix rdrand with entropy sent in from userspace
Fedora has integrated the jitter entropy daemon to work around slow
boot problems, especially on VM's that don't support virtio-rng:

    https://bugzilla.redhat.com/show_bug.cgi?id=1572944

It's understandable why they did this, but the Jitter entropy daemon
works fundamentally on the principle: "the CPU microarchitecture is
**so** complicated and we can't figure it out, so it *must* be
random".  Yes, it uses statistical tests to "prove" it is secure, but
AES_ENCRYPT(NSA_KEY, COUNTER++) will also pass statistical tests with
flying colors.

So if RDRAND is available, mix it into entropy submitted from
userspace.  It can't hurt, and if you believe the NSA has backdoored
RDRAND, then they probably have enough details about the Intel
microarchitecture that they can reverse engineer how the Jitter
entropy daemon affects the microarchitecture, and attack its output
stream.  And if RDRAND is in fact an honest DRNG, it will immeasurably
improve on what the Jitter entropy daemon might produce.

This also provides some protection against someone who is able to read
or set the entropy seed file.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
2018-07-17 21:32:36 -04:00
Hersen Wu
263318eea7 drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo
[why] dp hbr2 eye diagram pattern for raven asic is not stabled.
workaround is to use tp4 pattern. But this should not be
applied to asic before raven.

[how] add new bool varilable in asic caps. for raven asic,
use the workaround. for carrizo, vega, do not use workaround.

Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-17 15:13:09 -05:00
Leo Liu
96a5d8d491 drm/amdgpu: Make sure IB tests flushed after IP resume
Fixes: 2c773de2 (drm/amdgpu: defer test IBs on the rings at boot (V3))

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-17 15:12:50 -05:00
Taehee Yoo
26b2f55252 netfilter: nf_tables: fix jumpstack depth validation
The level of struct nft_ctx is updated by nf_tables_check_loops().  That
is used to validate jumpstack depth. But jumpstack validation routine
doesn't update and validate recursively.  So, in some cases, chain depth
can be bigger than the NFT_JUMP_STACK_SIZE.

After this patch, The jumpstack validation routine is located in the
nft_chain_validate(). When new rules or new set elements are added, the
nft_table_validate() is called by the nf_tables_newrule and the
nf_tables_newsetelem. The nft_table_validate() calls the
nft_chain_validate() that visit all their children chains recursively.
So it can update depth of chain certainly.

Reproducer:
   %cat ./test.sh
   #!/bin/bash
   nft add table ip filter
   nft add chain ip filter input { type filter hook input priority 0\; }
   for ((i=0;i<20;i++)); do
	nft add chain ip filter a$i
   done

   nft add rule ip filter input jump a1

   for ((i=0;i<10;i++)); do
	nft add rule ip filter a$i jump a$((i+1))
   done

   for ((i=11;i<19;i++)); do
	nft add rule ip filter a$i jump a$((i+1))
   done

   nft add rule ip filter a10 jump a11

Result:
[  253.931782] WARNING: CPU: 1 PID: 0 at net/netfilter/nf_tables_core.c:186 nft_do_chain+0xacc/0xdf0 [nf_tables]
[  253.931915] Modules linked in: nf_tables nfnetlink ip_tables x_tables
[  253.932153] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.18.0-rc3+ 
[  253.932153] RIP: 0010:nft_do_chain+0xacc/0xdf0 [nf_tables]
[  253.932153] Code: 83 f8 fb 0f 84 c7 00 00 00 e9 d0 00 00 00 83 f8 fd 74 0e 83 f8 ff 0f 84 b4 00 00 00 e9 bd 00 00 00 83 bd 64 fd ff ff 0f 76 09 <0f> 0b 31 c0 e9 bc 02 00 00 44 8b ad 64 fd
[  253.933807] RSP: 0018:ffff88011b807570 EFLAGS: 00010212
[  253.933807] RAX: 00000000fffffffd RBX: ffff88011b807660 RCX: 0000000000000000
[  253.933807] RDX: 0000000000000010 RSI: ffff880112b39d78 RDI: ffff88011b807670
[  253.933807] RBP: ffff88011b807850 R08: ffffed0023700ece R09: ffffed0023700ecd
[  253.933807] R10: ffff88011b80766f R11: ffffed0023700ece R12: ffff88011b807898
[  253.933807] R13: ffff880112b39d80 R14: ffff880112b39d60 R15: dffffc0000000000
[  253.933807] FS:  0000000000000000(0000) GS:ffff88011b800000(0000) knlGS:0000000000000000
[  253.933807] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  253.933807] CR2: 00000000014f1008 CR3: 000000006b216000 CR4: 00000000001006e0
[  253.933807] Call Trace:
[  253.933807]  <IRQ>
[  253.933807]  ? sched_clock_cpu+0x132/0x170
[  253.933807]  ? __nft_trace_packet+0x180/0x180 [nf_tables]
[  253.933807]  ? sched_clock_cpu+0x132/0x170
[  253.933807]  ? debug_show_all_locks+0x290/0x290
[  253.933807]  ? __lock_acquire+0x4835/0x4af0
[  253.933807]  ? inet_ehash_locks_alloc+0x1a0/0x1a0
[  253.933807]  ? unwind_next_frame+0x159e/0x1840
[  253.933807]  ? __read_once_size_nocheck.constprop.4+0x5/0x10
[  253.933807]  ? nft_do_chain_ipv4+0x197/0x1e0 [nf_tables]
[  253.933807]  ? nft_do_chain+0x5/0xdf0 [nf_tables]
[  253.933807]  nft_do_chain_ipv4+0x197/0x1e0 [nf_tables]
[  253.933807]  ? nft_do_chain_arp+0xb0/0xb0 [nf_tables]
[  253.933807]  ? __lock_is_held+0x9d/0x130
[  253.933807]  nf_hook_slow+0xc4/0x150
[  253.933807]  ip_local_deliver+0x28b/0x380
[  253.933807]  ? ip_call_ra_chain+0x3e0/0x3e0
[  253.933807]  ? ip_rcv_finish+0x1610/0x1610
[  253.933807]  ip_rcv+0xbcc/0xcc0
[  253.933807]  ? debug_show_all_locks+0x290/0x290
[  253.933807]  ? ip_local_deliver+0x380/0x380
[  253.933807]  ? __lock_is_held+0x9d/0x130
[  253.933807]  ? ip_local_deliver+0x380/0x380
[  253.933807]  __netif_receive_skb_core+0x1c9c/0x2240

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-17 20:48:24 +02:00
Linus Torvalds
3c53776e29 Mark HI and TASKLET softirq synchronous
Way back in 4.9, we committed 4cd13c21b2 ("softirq: Let ksoftirqd do
its job"), and ever since we've had small nagging issues with it.  For
example, we've had:

  1ff688209e ("watchdog: core: make sure the watchdog_worker is not deferred")
  8d5755b3f7 ("watchdog: softdog: fire watchdog even if softirqs do not get to run")
  217f697436 ("net: busy-poll: allow preemption in sk_busy_loop()")

all of which worked around some of the effects of that commit.

The DVB people have also complained that the commit causes excessive USB
URB latencies, which seems to be due to the USB code using tasklets to
schedule USB traffic.  This seems to be an issue mainly when already
living on the edge, but waiting for ksoftirqd to handle it really does
seem to cause excessive latencies.

Now Hanna Hawa reports that this issue isn't just limited to USB URB and
DVB, but also causes timeout problems for the Marvell SoC team:

 "I'm facing kernel panic issue while running raid 5 on sata disks
  connected to Macchiatobin (Marvell community board with Armada-8040
  SoC with 4 ARMv8 cores of CA72) Raid 5 built with Marvell DMA engine
  and async_tx mechanism (ASYNC_TX_DMA [=y]); the DMA driver (mv_xor_v2)
  uses a tasklet to clean the done descriptors from the queue"

The latency problem causes a panic:

  mv_xor_v2 f0400000.xor: dma_sync_wait: timeout!
  Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for transaction

We've discussed simply just reverting the original commit entirely, and
also much more involved solutions (with per-softirq threads etc).  This
patch is intentionally stupid and fairly limited, because the issue
still remains, and the other solutions either got sidetracked or had
other issues.

We should probably also consider the timer softirqs to be synchronous
and not be delayed to ksoftirqd (since they were the issue with the
earlier watchdog problems), but that should be done as a separate patch.
This does only the tasklet cases.

Reported-and-tested-by: Hanna Hawa <hannah@marvell.com>
Reported-and-tested-by: Josef Griebichler <griebichler.josef@gmx.at>
Reported-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-17 11:12:43 -07:00
Dewet Thibaut
fbdb328c6b x86/MCE: Remove min interval polling limitation
commit b3b7c4795c ("x86/MCE: Serialize sysfs changes") introduced a min
interval limitation when setting the check interval for polled MCEs.
However, the logic is that 0 disables polling for corrected MCEs, see
Documentation/x86/x86_64/machinecheck. The limitation prevents disabling.

Remove this limitation and allow the value 0 to disable polling again.

Fixes: b3b7c4795c ("x86/MCE: Serialize sysfs changes")
Signed-off-by: Dewet Thibaut <thibaut.dewet@nokia.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
[ Massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180716084927.24869-1-alexander.sverdlin@nokia.com
2018-07-17 17:56:25 +02:00
Takashi Iwai
39675f7a7c ALSA: rawmidi: Change resized buffers atomically
The SNDRV_RAWMIDI_IOCTL_PARAMS ioctl may resize the buffers and the
current code is racy.  For example, the sequencer client may write to
buffer while it being resized.

As a simple workaround, let's switch to the resized buffer inside the
stream runtime lock.

Reported-by: syzbot+52f83f0ea8df16932f7f@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-17 17:33:17 +02:00
Weiping Zhang
fa441b71aa nvme: don't enable AEN if not supported
Avoid excuting set_feature command if there is no supported bit in
Optional Asynchronous Events Supported (OAES).

Fixes: c0561f82 ("nvme: submit AEN event configuration on startup")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Weiping Zhang <zhangweiping@didichuxing.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-17 07:30:27 -07:00
Scott Bauer
cf39a6bc34 nvme: ensure forward progress during Admin passthru
If the controller supports effects and goes down during the passthru admin
command we will deadlock during namespace revalidation.

[  363.488275] INFO: task kworker/u16:5:231 blocked for more than 120 seconds.
[  363.488290]       Not tainted 4.17.0+ 
[  363.488296] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  363.488303] kworker/u16:5   D    0   231      2 0x80000000
[  363.488331] Workqueue: nvme-reset-wq nvme_reset_work [nvme]
[  363.488338] Call Trace:
[  363.488385]  schedule+0x75/0x190
[  363.488396]  rwsem_down_read_failed+0x1c3/0x2f0
[  363.488481]  call_rwsem_down_read_failed+0x14/0x30
[  363.488504]  down_read+0x1d/0x80
[  363.488523]  nvme_stop_queues+0x1e/0xa0 [nvme_core]
[  363.488536]  nvme_dev_disable+0xae4/0x1620 [nvme]
[  363.488614]  nvme_reset_work+0xd1e/0x49d9 [nvme]
[  363.488911]  process_one_work+0x81a/0x1400
[  363.488934]  worker_thread+0x87/0xe80
[  363.488955]  kthread+0x2db/0x390
[  363.488977]  ret_from_fork+0x35/0x40

Fixes: 84fef62d13 ("nvme: check admin passthru command effects")
Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Reviewed-by: Keith Busch <keith.busch@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-17 05:46:19 -07:00
Qu Wenruo
665d4953cd btrfs: scrub: Don't use inode page cache in scrub_handle_errored_block()
In commit ac0b4145d6 ("btrfs: scrub: Don't use inode pages for device
replace") we removed the branch of copy_nocow_pages() to avoid
corruption for compressed nodatasum extents.

However above commit only solves the problem in scrub_extent(), if
during scrub_pages() we failed to read some pages,
sctx->no_io_error_seen will be non-zero and we go to fixup function
scrub_handle_errored_block().

In scrub_handle_errored_block(), for sctx without csum (no matter if
we're doing replace or scrub) we go to scrub_fixup_nodatasum() routine,
which does the similar thing with copy_nocow_pages(), but does it
without the extra check in copy_nocow_pages() routine.

So for test cases like btrfs/100, where we emulate read errors during
replace/scrub, we could corrupt compressed extent data again.

This patch will fix it just by avoiding any "optimization" for
nodatasum, just falls back to the normal fixup routine by try read from
any good copy.

This also solves WARN_ON() or dead lock caused by lame backref iteration
in scrub_fixup_nodatasum() routine.

The deadlock or WARN_ON() won't be triggered before commit ac0b4145d6
("btrfs: scrub: Don't use inode pages for device replace") since
copy_nocow_pages() have better locking and extra check for data extent,
and it's already doing the fixup work by try to read data from any good
copy, so it won't go scrub_fixup_nodatasum() anyway.

This patch disables the faulty code and will be removed completely in a
followup patch.

Fixes: ac0b4145d6 ("btrfs: scrub: Don't use inode pages for device replace")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-07-17 13:56:30 +02:00
Michael Ellerman
941d810725 powerpc/xmon: Fix disassembly since printf changes
The recent change to add printf annotations to xmon inadvertently made
the disassembly output ugly, eg:

  c00000002001e058  7ee00026      mfcr    r23
  c00000002001e05c  fffffffffae101a0      std     r23,416(r1)
  c00000002001e060  fffffffff8230000      std     r1,0(r3)

The problem being that negative 32-bit values are being displayed in
full 64-bits.

The printf conversion was actually correct, we are passing unsigned
long so it should use "lx". But powerpc instructions are only 4 bytes
and the code only reads 4 bytes, so inst should really just be
unsigned int, and that also fixes the printing to look the way we
want:

  c00000002001e058  7ee00026      mfcr    r23
  c00000002001e05c  fae101a0      std     r23,416(r1)
  c00000002001e060  f8230000      std     r1,0(r3)

Fixes: e70d8f5526 ("powerpc/xmon: Add __printf annotation to xmon_printf()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-17 21:18:14 +10:00
Greg Kroah-Hartman
2c3806c482 usb: fixes for v4.18-rc5
With a total of 20 non-merge commits, we have accumulated quite a few
 fixes. These include lot's of fixes the our audio gadget interface, a
 build error fix for PPC64 builds for the frescale PHY driver,
 sleep-while-atomic fixes on the r8a66597 UDC driver, 3-stage SETUP fix
 for the aspeed-vhub UDC and some other misc fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJRBAABCgA7FiEElLzh7wn96CXwjh2IzL64meEamQYFAltNmBgdHGZlbGlwZS5i
 YWxiaUBsaW51eC5pbnRlbC5jb20ACgkQzL64meEamQbp6hAAzShWRGLQowpnIau+
 CwrI4cm5Gknz0BRCdgoXy+sofxof7WRJYnr+N/N7GlWHq5uZPpQv+br7aiYVxbQd
 7YJfGUgfTS2FGGzcaoUP9S0VC9+U8UKfCKtCkuNhGABG9BGFKuS6R/QdavukxXQU
 uBiAUWonxVJlSJ5xnQZQ0pt2ZeUir+qEP0NgpmFQe2tjL9bQNSVu3dCL9/5QHDuk
 sGV4UnFSXyy86R7su0XViqpaFozYmhbQTqh5fy7V/Qmf7oaqRRs2hnTuNFt3I1a8
 QHOsKkRQS7+4nc5CGWuWmR+6yzNZBjyHagC35KGOKgMvSPfo5Bn8e+eQmBOnfb98
 nU8+Bh6FMg/U3JGmb4R0/ksIFzxfxipVODTvH6dPJzYmtvZsCuzItwX3TRnhpnQ9
 B9Rg3tkL2BBr2fnCR5IlLlf6i1iSq798BSAokO6vlYa7LdSDRx16HM0oRUZE6d5X
 Mg2Zx7SLWV94FYR7RTN05/d/NofRUXycxEgG9toWIGvlu2fTl/Bh3weRenOfAxIr
 6N03aXsguexFqP/IMrsfT5Hucjl3UtpQBQxnQV5aJ7QT/np00aoUgaXTkMztNpUs
 jceiTNOJawIc93w/1IWHwqcql2igD+R4FCKTpa+9GQ+4Ph5gJFDnXqo1lVmGqti9
 kvLP5+uiqrXVu9dpOSFHFpucexM=
 =w2qX
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-v4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v4.18-rc5

With a total of 20 non-merge commits, we have accumulated quite a few
fixes. These include lot's of fixes the our audio gadget interface, a
build error fix for PPC64 builds for the frescale PHY driver,
sleep-while-atomic fixes on the r8a66597 UDC driver, 3-stage SETUP fix
for the aspeed-vhub UDC and some other misc fixes.
2018-07-17 10:53:25 +02:00
Eugeniu Rosca
eec24f2a0d usb: gadget: f_uac2: fix endianness of 'struct cntrl_*_lay3'
The list [1] of commits doing endianness fixes in USB subsystem is long
due to below quote from USB spec Revision 2.0 from April 27, 2000:

------------
8.1 Byte/Bit Ordering

Multiple byte fields in standard descriptors, requests, and responses
are interpreted as and moved over the bus in little-endian order, i.e.
LSB to MSB.
------------

This commit belongs to the same family.

[1] Example of endianness fixes in USB subsystem:
commit 14e1d56cbe ("usb: gadget: f_uac2: endianness fixes.")
commit 42370b8211 ("usb: gadget: f_uac1: endianness fixes.")
commit 63afd5cc78 ("USB: chaoskey: fix Alea quirk on big-endian hosts")
commit 74098c4ac7 ("usb: gadget: acm: fix endianness in notifications")
commit cdd7928df0 ("ACM gadget: fix endianness in notifications")
commit 323ece54e0 ("cdc-wdm: fix endianness bug in debug statements")
commit e102609f10 ("usb: gadget: uvc: Fix endianness mismatches")
       list goes on

Fixes: 132fcb4608 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-17 10:12:52 +03:00
Antti Seppälä
1e111e8852 usb: dwc2: Fix inefficient copy of unaligned buffers
Make sure only to copy any actual data rather than the whole buffer,
when releasing the temporary buffer used for unaligned non-isochronous
transfers.

Taken directly from commit 0efd937e27 ("USB: ehci-tegra: fix inefficient
copy of unaligned buffers")

Tested with Lantiq xRX200 (MIPS) and RPi Model B Rev 2 (ARM)

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-17 10:12:52 +03:00
Antti Seppälä
56406e017a usb: dwc2: Fix DMA alignment to start at allocated boundary
The commit 3bc04e28a0 ("usb: dwc2: host: Get aligned DMA in a more
supported way") introduced a common way to align DMA allocations.
The code in the commit aligns the struct dma_aligned_buffer but the
actual DMA address pointed by data[0] gets aligned to an offset from
the allocated boundary by the kmalloc_ptr and the old_xfer_buffer
pointers.

This is against the recommendation in Documentation/DMA-API.txt which
states:

  Therefore, it is recommended that driver writers who don't take
  special care to determine the cache line size at run time only map
  virtual regions that begin and end on page boundaries (which are
  guaranteed also to be cache line boundaries).

The effect of this is that architectures with non-coherent DMA caches
may run into memory corruption or kernel crashes with Unhandled
kernel unaligned accesses exceptions.

Fix the alignment by positioning the DMA area in front of the allocation
and use memory at the end of the area for storing the orginal
transfer_buffer pointer. This may have the added benefit of increased
performance as the DMA area is now fully aligned on all architectures.

Tested with Lantiq xRX200 (MIPS) and RPi Model B Rev 2 (ARM).

Fixes: 3bc04e28a0 ("usb: dwc2: host: Get aligned DMA in a more supported way")
Cc: <stable@vger.kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-17 10:12:52 +03:00
Enric Balletbo i Serra
33d8a2f6ac usb: dwc3: rockchip: Fix PHY documentation links.
Commit 34962fb807 ("docs: Fix more broken references") replaced the
broken reference to rockchip,dwc3-usb-phy.txt binding for the Qualcomm
DWC3 binding (qcom-dwc3-usb-phy.txt). That's wrong, so replace that
reference for the correct ones.

Fixes: 34962fb807 ("docs: Fix more broken references")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-17 10:12:51 +03:00