Add drm_mode_config_helper_suspend/resume() which takes care of
atomic modeset suspend/resume for simple use cases.
The suspend state is stored in struct drm_mode_config.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-3-noralf@tronnes.org
Fix docs to reflect code and drm_kms_helper_poll_disable() docs by saying
that calling drm_kms_helper_poll_enable() is fine even if output polling
is not enabled.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-2-noralf@tronnes.org
The sun4i DRM driver maintains a list of compatible strings it uses to
check if a device node within the display component graph is a TCON.
The TCON driver also has this list, used to bind the TCON driver to
the device. These two lists are identical.
Instead of maintaining two identical lists, export the list from the
TCON driver for the DRM driver to use.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171127084632.25511-1-wens@csie.org
We're currently calling ktime_to_timespec64() on stack garbage
hence the debug output for vblank timestamps also contains garbage.
Let's assing something to the ktime_t first before we go converting
it to a timespec.
While at it micro-optimize the ktime_to_timespec64() calls away
when vblank debugging isn't enabled.
Fixes: 67680d3c04 ("drm: vblank: use ktime_t instead of timeval")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Keith Packard <keithp@keithp.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113150210.11311-1-ville.syrjala@linux.intel.com
Acked-by: Arnd Bergmann <arnd@arndb.de>
The normal DRM vblank interrupt events started using monotonic times in
commit c61eef726a ("drm: add support for monotonic vblank timestamps"),
which is useful for a number of reasons, including the possible y2038
overflow.
The VIA_WAIT_IRQ ioctl uses the same drm_wait_vblank_reply as
DRM_IOCTL_WAIT_VBLANK, but still uses wall-clock time.
This converts it to using monotonic time as well, which is more
consistent, and avoids problems with the y2038 overflow as well
as synchronization issues when the real time skips.
I could not find the matching user space that calls the VIA_WAIT_IRQ
ioctl to verify that this is safe, but it very likely is. Please
either test or review the user space side before applying this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171127111728.1710742-1-arnd@arndb.de
Simple va_args equivalent to the existing drm_printf() for use with the
drm_printer.
v2: Fixup kerneldoc to match final parameter names.
v3: Turn it into a kerneldoc comment
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123084051.30203-1-chris@chris-wilson.co.uk
Appedix F of HDMI 2.0 says that some HDMI sink may fail to switch from
3D to 2D mode in a timely fashion if the source simply stops sending the
HDMI infoframe. The suggested workaround is to keep sending the
infoframe even when strictly not necessary (ie. no VIC and no S3D).
HDMI 1.4 does allow for this behaviour, stating that sending the
infoframe is optional in this case.
The infoframe was first specified in HDMI 1.4, so in theory sinks
predating that may not appreciate us sending an uknown infoframe
their way. To avoid regressions let's try to determine if the sink
supports the infoframe or not. Unfortunately there's no direct way
to do that, so instead we'll just check if we managed to parse any
HDMI 1.4 4k or stereo modes from the EDID, and if so we assume the
sink will accept the infoframe. Also if the EDID contains the HDMI
2.0 HDMI Forum VSDB we can assume the sink is prepared to receive
the infoframe.
v2: Fix getting has_hdmi_infoframe from display_info
Always fail constructing the infoframe if the display
possibly can't handle it
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113170427.4150-3-ville.syrjala@linux.intel.com
Bake in the conflict between the drm_print.h extraction and the
addition of DRM_DEBUG_LEASES since we lost it a few too many times.
Also fix a new use of drm_plane_helper_check_state in msm to follow
Ville's conversion in
commit a01cb8ba3f
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Nov 1 22:16:19 2017 +0200
drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The hardware has enums for altering the Cr and Cb order,
so use this instead of having a flag which swaps the
order the pointers are presented to the hardware
(that only worked for 3 plane formats anyway).
Explicitly sets .pixel_order in each case, rather than
relying on then default XYCBCR order being a value 0.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/563872b69c1e5df142cb15ebfca7f20056b8a64c.1510841336.git.dave.stevenson@raspberrypi.org
drm_plane_helper_check_update() isn't a transitional helper, so let's
rename it to drm_atomic_helper_check_plane_state() and move it into
drm_atomic_helper.c.
v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc
Cc: Daniel Vetter <daniel@ffwll.ch>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101201619.6175-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_plane_helper_check_state() is supposed to do things the atomic way,
so it should not be inspecting crtc->enabled. Rather we should be
looking at crtc_state->enable.
We have a slight complication due to drm_plane_helper_check_update()
reusing drm_plane_helper_check_state() for non-atomic drivers. Thus
we'll have to pass the crtc_state in manally and construct a fake
crtc_state in drm_plane_helper_check_update().
v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101201558.6059-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Try to fix the code to actually clip the plane to the crtc bounds
instead of the user provided crtc coordinates (which would be a no-op
since those are exactly the coordinates before clipping).
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101182920.14386-4-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Atomic drivers have no reason to use drm_plane_helper_check_update()
instead of drm_plane_helper_check_state(). So let's switch over.
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101182920.14386-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Throw away the bugs crtc coords vs. fb size check. Crtc coords don't
define the viewport inside the fb, that's a job for the src coords,
which have been checked by the core already.
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101182920.14386-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
There is no need to #define the license of the driver, just put it in
the MODULE_LICENSE() line directly as a text string.
This allows tools that check that the module license matches the source
code license to work properly, as there is no need to unwind the
unneeded dereference, especially when the string is defined in a .h file
far away from the .c file it is used in.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Reported-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117141632.GA17880@kroah.com
The i2c adapter on DP AUX is purely a software construct. Linking
it to the device node of the parent device is wrong, as it leads to
2 devices sharing the same device node, which is bad practice, as
well as the i2c trying to populate children of the i2c adapter by
looking at the child device nodes of the parent device.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170113173630.22138-1-l.stach@pengutronix.de
The Mitsubishi AA070MC01 is a 7.0" WVGA (800x480) TFT panel working in
8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1508537917-1723-1-git-send-email-lukma@denx.de
The Tianma TM070RVHG71 is a 7" WVGA (800x480) TFT LCD panel connected
via LVDS and can be supported by the simple-panel binding.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107153058.5554-1-lukma@denx.de
If the sink device is in HDMI mode, enable infoframe interrupt in scdt
irq handle function else call start_video function immediately, because
in DVI mode, there is no infoframe interrupt provided.
Rename start_hdmi function to start_video and get rid of the old
start_video function. In start_video, if the sink is DVI and mode is
MHL1 or MHl2, write appropriate values to registers else the path
should remain the same as in HDMI mode.
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510224822-7732-1-git-send-email-m.purski@samsung.com
The maximum pixel clock depends on the version of the connected MHL
adapter. Add mode_valid callback to filter out modes with too high pixel
clock to avoid failure in mode_fixup later.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109102831.19844-1-m.szyprowski@samsung.com
RK3126 vop register layout is similar with rk3036, so some feature
can reuse with rk3036.
RK3126 support two overlay plane and one hwc plane, max output
resolution is 1080p. it support IOMMU, and its IOMMU same as
rk3288's
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Mark Yao <mark.yao@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510658857-90299-1-git-send-email-hjc@rock-chips.com
drm_gem_cma_prime_import_sg_table() will fail if the number of entries
in the sg_table > 1. However, you can have a device that uses an IOMMU
engine and can map a discontiguous buffer with multiple entries that
have consecutive sg_dma_addresses, effectively making it contiguous.
Allow for that scenario by testing the entries in the sg_table for
contiguous coverage.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110133310.1225-1-Liviu.Dudau@arm.com
It's useful for syncing async connector work like link retraining.
v2: Make it work (Manasi&Ville)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110105313.16718-1-daniel.vetter@ffwll.ch
Use the correct name for the function argument in the docs.
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114191021.15591-1-ville.syrjala@linux.intel.com
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The introduction of: drm/framebuffer: Add framebuffer debugfs file
broke vgem. That patch assumed that all drivers had initialized the
dev->mode_config.fb_lock mutex which happens in drm_mode_config_init().
vgem doesn't need to call drm_mode_config_init().
Fix this by only creating the framebuffer debugfs file for modesetting
drivers.
Fixes: 45d58b4029 ("drm/framebuffer: Add framebuffer debugfs file")
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113231201.26177-1-noralf@tronnes.org
. It moves mode setup and plane update code to commit
like other CRTC drivers
. It makes mode commit to be called in enable callback only one time
. some cleanup and fixup to HDMI and Mixer drivers.
. It adds 1024x768, 1280x1024 and 1366x768 modes support
- Added HDMI audio interface driver
. As of now, HDMI audio worked on boards with external audio codec connected
in parallel with the HDMI audio transmitter's I2S interface.
This patch is required to support HDMI audio properly.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wpjH
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
- Improved HDMI and Mixer drivers
. It moves mode setup and plane update code to commit
like other CRTC drivers
. It makes mode commit to be called in enable callback only one time
. some cleanup and fixup to HDMI and Mixer drivers.
. It adds 1024x768, 1280x1024 and 1366x768 modes support
- Added HDMI audio interface driver
. As of now, HDMI audio worked on boards with external audio codec connected
in parallel with the HDMI audio transmitter's I2S interface.
This patch is required to support HDMI audio properly.
* tag 'exynos-drm-next-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm: exynos: Add driver for HDMI audio interface
drm/exynos/hdmi: add 85.5MHz pixel clock for v14 HDMI PHY
drm/exynos/mixer: enable support for 1024x768 and 1280x1024 modes
drm/exynos/hdmi: quirk for support mode timings conversion
drm/exynos/mixer: pass actual mode on MIXER to encoder
drm/exynos: add mode_fixup callback to exynos_drm_crtc_ops
drm/exynos/hdmi: remove redundant mode field
drm/exynos/mixer: remove mixer_resources sub-structure
drm/exynos/mixer: fix mode validation code
drm/exynos/mixer: move resolution configuration to single function
drm/exynos/mixer: move mode commit to enable callback
drm/exynos/mixer: abstract out output mode setup code
This is a shared tree between drm and audio for some amd bits.
* 'linus-4.14-rc4-acp-prereq' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu Moving amdgpu asic types to a separate file
ASoC: AMD: Added asic_type as ACP DMA driver platform data
drm/amd/amdgpu: Added asic_type as ACP DMA driver platform data
- qxl: Use a shadow bo as primary and blit to it to fix flicker (Gerd)
- rockchip: Convert psr spinlock to mutex (Emil)
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAloJ8gUACgkQlvcN/ahK
BwruCAf/afFM64VPaMhYwl5ejfDHs39TuahlOPZ2/wx8ABdk9y5RVtidoi5grk7a
KSJcR0jPMeCnhWmEod2nEADtIxOvyq30EdttGX/OGWv0ydTqb5peCbYbc7H3J1N/
nCdHDygC6a3/0/mFuTVNnKMhiggPmbBZKjFiXMv8t2GQXJd1iDn4WS1A8JoL3zE3
Ey4ZV+m7dsm1fQB5B+/84zG34SeqQ7N7sUHm3N9DUGXgfCfbodvb8uKfh4DB8dIU
JOXiD60GGZ21HhEdZWcVleZLfNoM6tAHD6q6g8mrPAmUM60Naf0THQrnVH8xNONc
B1v53iQrqxjF9O/oMpycc1dGXxbnRA==
=cz6U
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2017-11-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Driver Changes:
- qxl: Use a shadow bo as primary and blit to it to fix flicker (Gerd)
- rockchip: Convert psr spinlock to mutex (Emil)
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Gerd Hoffmann <kraxel@redhat.com>
* tag 'drm-misc-fixes-2017-11-13' of git://anongit.freedesktop.org/drm/drm-misc:
drm/rockchip: analogix_dp: Use mutex rather than spinlock
-----BEGIN PGP SIGNATURE-----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=crrm
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2017-11-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 fixes for v4.15
* tag 'drm-intel-next-fixes-2017-11-10' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
drm/i915: Move init_clock_gating() back to where it was
drm/i915: Prune the reservation shared fence array
drm/i915: Idle the GPU before shinking everything
drm/i915: Lock llist_del_first() vs llist_del_all()
drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
drm/i915: Disable lazy PPGTT page table optimization for vGPU
drm/i915/execlists: Remove the priority "optimisation"
drm/i915: Filter out spurious execlists context-switch interrupts
- qxl: Use a shadow bo as primary and blit to it to fix flicker (Gerd)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAln7GdwACgkQlvcN/ahK
BwqqiggAgZSKgZzxgu5eBepENn9RiYuShC9jZPPSlA6FUKZ+2gFXdi0Ni+6fD7OV
oDliVcQWcfQDzePWiKlgObCLNMVEpNcGbIyqwJbEY8k664hh2bQVVuB0fZiPY8nn
Oc4ExSSePrhoam+fuOLfS39xERpAtG7j2cVxnLfrUBxM6wLo9FpwmD+mUCKorO1F
iF37uPQ571dTNheQK99KDJctFu4tzm9z0Jfbne4bF10rA+02/0Ov6cW/SOwlIdQ5
bMrwHQ7NGIDtipyKNzOQO8rVC7a+afmKC7+mQd5yMEFg+7EglPe1u1mI7YyhL6Z3
G1ihIpbTUyjeE60/8epFHtOg38/5NA==
=inUI
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2017-11-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Driver Changes:
- qxl: Use a shadow bo as primary and blit to it to fix flicker (Gerd)
* tag 'drm-misc-fixes-2017-11-02' of git://anongit.freedesktop.org/drm/drm-misc:
qxl: alloc & use shadow for dumb buffers
drm/qxl: replace QXL_INFO with DRM_DEBUG_DRIVER
There is a new core debugfs file that prints fb/gem info:
<debugfs>/dri/<n>/framebuffer
Use drm_gem_cma_print_info() to provide info to that output instead
of using drm_fb_cma_debugfs_show().
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-12-noralf@tronnes.org
There is a new core debugfs file that prints fb/gem info:
<debugfs>/dri/<n>/framebuffer
Use drm_gem_cma_print_info() to provide info to that output instead
of using drm_fb_cma_debugfs_show().
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-11-noralf@tronnes.org
There is a new core debugfs file that prints fb/gem info:
<debugfs>/dri/<n>/framebuffer
Use drm_gem_cma_print_info() to provide info to that output instead
of using drm_fb_cma_debugfs_show().
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-10-noralf@tronnes.org
There is a new core debugfs file that prints fb/gem info:
<debugfs>/dri/<n>/framebuffer
Use drm_gem_cma_print_info() to provide info to that output instead
of using drm_fb_cma_debugfs_show().
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-9-noralf@tronnes.org
Use drm_framebuffer_print_info() to print framebuffer info in
drm_atomic_plane_print_state(). This will give optional GEM info as well.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-6-noralf@tronnes.org
Add debugfs file that dumps info about the framebuffers and its planes.
Also dump info about any connected gem object(s).
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-5-noralf@tronnes.org
Simply mmap'ing /dev/dri/card0 repeatedly will spam the kernel
log with qxl_mmap information messages. The following example code
illustrates this:
int main(void)
{
int fd = open("/dev/dri/card0", O_RDONLY);
if (fd == -1)
err(1, "open failed");
for (;;) {
void *m = mmap(NULL, 4096, PROT_READ,
MAP_SHARED, fd, 0);
if (m != MAP_FAILED)
munmap(m, 4096);
}
}
Stop the spamming by removing the pr_info message. Since the mmap'ing
returns -EINVAL there is no need for the pr_info message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170912173422.14062-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The lease updates missed a few bits of docs, fixed up
the wrong name on the property lookup fn as well.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
